Contenu | Rechercher | Menus

Annonce

La nouvelle clé USB Ubuntu-fr est en prévente
Rendez-vous sur la boutique En Vente Libre

Si vous avez des soucis pour rester connecté, déconnectez-vous puis reconnectez-vous depuis ce lien en cochant la case
Me connecter automatiquement lors de mes prochaines visites.

À propos de l'équipe du forum.

#1 Le 09/01/2019, à 17:18

Toynoy

Problème démarrage Ubuntu 18.04.1 LTS

Bonjour à tous,

J'ai depuis quelques jours un problème au démarrage d'Ubuntu, l'écran violet de chargement Ubuntu se fige puis plus rien donc arrêt forcé-> redémarrage en recovvery -> resume-> démarrage d'une session, au bout de longues minutes, plus ou moins bancale (parfois perte de son, parfois tout en lecture seule etc). J'ai aussi parfois le message "initramfs" donc fsck manuel du sda concerné et redémarrage de la session. j'ai cherché pas mal d'infos, je ne sais pas si le problème vient du GRUB ou du matériel ou autre, j'ai essayé quelques trucs mais je préfère venir voir les sages et avisés avant le drame, ma priorité étant de ne pas perdre de données qui sont très importantes! Le fait est que le problème persiste a chaque redémarrage.

Merci d'avance, n’hésitez pas, je sais que la description du problème est possiblement assez vague!

Antoine.

Dernière modification par Toynoy (Le 09/01/2019, à 17:20)

Hors ligne

#2 Le 09/01/2019, à 20:32

Arbiel

Re : Problème démarrage Ubuntu 18.04.1 LTS

Bonsoir

Deux actions à entreprendre :

1) puisque tu crains de perdre tes données, les sauvegarder
2) pour permettre d'y voir plus clair, publier dans ta prochaine intervention le rapport de démarrage que tu obtiendras avec boot-repair, sans demande de réparation automatique


Arbiel Perlacremaz
Dell Vostro Ubuntu 18.04 64 bits
J'ai abandonné azerty au profit de bépo, google au profit de Lilo et mes adresses électroniques au profit d'une messagerie réellement sécurisée, Protonmail.

Hors ligne

#3 Le 09/01/2019, à 21:29

Toynoy

Re : Problème démarrage Ubuntu 18.04.1 LTS

Arbiel a écrit :

Bonsoir

Deux actions à entreprendre :

1) puisque tu crains de perdre tes données, les sauvegarder
2) pour permettre d'y voir plus clair, publier dans ta prochaine intervention le rapport de démarrage que tu obtiendras avec boot-repair, sans demande de réparation automatique

Bonsoir et merci de ta réponses!

il y a des moment ou l'ordinateur ne me laisse même pas copier coller mes fichiers donc c'est compliqué. Ceci dit en ce moment moment même il est clément donc je suis en train de transférer tout ce que je peux.
pour ce qui est de Boot repair, je l'ai effectivement installé pensant que ça allait aider mais à son lancement la petite fenêtre de chargement/lancement "detection des systemes(mount) etc", cherche à l'infini sans ouvrir boot repair, et accessoirement ça transforme tout mes fichiers en lecture seule d'un coup. tout ça pour dire que même boot repair ne se lance pas...

Hors ligne

#4 Le 10/01/2019, à 00:39

Arbiel

Re : Problème démarrage Ubuntu 18.04.1 LTS

Ne disposes-tu pas de l'outil que tu as utilisé pour installer ton système ?

Dans l'affirmative, utilise le pour démarrer ta machine ; sinon, va sur le site de téléchargement, télécharge le fichier de la distribution et crée un nouvel outil d'installation, ce qui te ramène à la situation précédente.


Arbiel Perlacremaz
Dell Vostro Ubuntu 18.04 64 bits
J'ai abandonné azerty au profit de bépo, google au profit de Lilo et mes adresses électroniques au profit d'une messagerie réellement sécurisée, Protonmail.

Hors ligne

#5 Le 10/01/2019, à 01:03

ubuntu18a

Re : Problème démarrage Ubuntu 18.04.1 LTS

Bonsoir.
Penses aussi à donner le retour de cette commande

sudo smartctl -s on -a /dev/sda

Il faudra probablement que tu installes le logiciel smartmontools

Hors ligne

#6 Le 10/01/2019, à 16:35

Toynoy

Re : Problème démarrage Ubuntu 18.04.1 LTS

ubuntu18a a écrit :

Bonsoir.
Penses aussi à donner le retour de cette commande

sudo smartctl -s on -a /dev/sda

Il faudra probablement que tu installes le logiciel smartmontools


Bonjour!

j'ai essayé d'installer comme tu m'a conseillé smartmontools, et j'ai un message qui apparaît (le même qui est apparu quelques minutes avant après une proposition de MAJ via gestionnaire)
"erreur de programmation dans aptdaemon", donc je ne peux ni faire des mise a jour ni installer le paquet que tu m'as conseillé.

Hors ligne

#7 Le 10/01/2019, à 19:32

Toynoy

Re : Problème démarrage Ubuntu 18.04.1 LTS

Arbiel a écrit :

Bonsoir

Deux actions à entreprendre :

1) puisque tu crains de perdre tes données, les sauvegarder
2) pour permettre d'y voir plus clair, publier dans ta prochaine intervention le rapport de démarrage que tu obtiendras avec boot-repair, sans demande de réparation automatique


J'ai (et je ne comprend pas pourquoi) par surprise réussi a lancer Boot Repair et a faire le diagnostic, je te copie le rapport! big_smile

 Boot Info Script 8f991e4 + Boot-Repair extra info      [Boot-Info 25oct2017]


============================= Boot Info Summary: ===============================

 => No boot loader is installed in the MBR of /dev/sda.

sda1: __________________________________________________________________________

    File system:       vfat
    Boot sector type:  Unknown
    Boot sector info:  No errors found in the Boot Parameter Block.
    Operating System:  
    Boot files:        /EFI/ubuntu/grub.cfg /EFI/BOOT/fbx64.efi 
                       /EFI/ubuntu/fwupx64.efi /EFI/ubuntu/grubx64.efi 
                       /EFI/ubuntu/mmx64.efi /EFI/ubuntu/shimx64.efi

sda2: __________________________________________________________________________

    File system:       ext4
    Boot sector type:  -
    Boot sector info: 
    Operating System:  Ubuntu 18.04.1 LTS
    Boot files:        /boot/grub/grub.cfg /etc/fstab

sda3: __________________________________________________________________________

    File system:       
    Boot sector type:  -
    Boot sector info: 
    Mounting failed:   mount: /mnt/BootInfo/sda3: unknown filesystem type ''.

============================ Drive/Partition Info: =============================

Drive: sda _____________________________________________________________________
Disk /dev/sda: 931.5 GiB, 1000204886016 bytes, 1953525168 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: gpt

Partition  Boot  Start Sector    End Sector  # of Sectors  Id System

/dev/sda1                   1 1,953,525,167 1,953,525,167  ee GPT


GUID Partition Table detected.

Partition  Attrs   Start Sector    End Sector  # of Sectors System
/dev/sda1                 2,048     1,050,623     1,048,576 EFI System partition
/dev/sda2             1,050,624 1,946,263,551 1,945,212,928 Data partition (Linux)
/dev/sda3         1,946,263,552 1,953,523,711     7,260,160 Swap partition (Linux)

Attributes: R=Required, N=No Block IO, B=Legacy BIOS Bootable, +=More bits set

"blkid" output: ________________________________________________________________

Device           UUID                                   TYPE       LABEL

/dev/loop0                                              squashfs   
/dev/loop1                                              squashfs   
/dev/loop2                                              squashfs   
/dev/loop3                                              squashfs   
/dev/loop4                                              squashfs   
/dev/loop5                                              squashfs   
/dev/loop6                                              squashfs   
/dev/loop7                                              squashfs   
/dev/loop8                                              squashfs   
/dev/sda1        92C3-DEDC                              vfat       
/dev/sda2        3ffa830d-e2f6-4e21-887f-54deffa6a028   ext4       

========================= "ls -l /dev/disk/by-id" output: ======================

total 0
lrwxrwxrwx 1 root root  9 Jan 10 18:25 ata-TOSHIBA_MQ01ABD100_55BKC1EWT -> ../../sda
lrwxrwxrwx 1 root root 10 Jan 10 18:25 ata-TOSHIBA_MQ01ABD100_55BKC1EWT-part1 -> ../../sda1
lrwxrwxrwx 1 root root 10 Jan 10 18:25 ata-TOSHIBA_MQ01ABD100_55BKC1EWT-part2 -> ../../sda2
lrwxrwxrwx 1 root root 10 Jan 10 18:25 ata-TOSHIBA_MQ01ABD100_55BKC1EWT-part3 -> ../../sda3
lrwxrwxrwx 1 root root  9 Jan 10 18:10 ata-TSSTcorp_CDDVDW_SU-208GB_S16T6YIG202J7P -> ../../sr0
lrwxrwxrwx 1 root root  9 Jan 10 18:25 wwn-0x5000039643c84283 -> ../../sda
lrwxrwxrwx 1 root root 10 Jan 10 18:25 wwn-0x5000039643c84283-part1 -> ../../sda1
lrwxrwxrwx 1 root root 10 Jan 10 18:25 wwn-0x5000039643c84283-part2 -> ../../sda2
lrwxrwxrwx 1 root root 10 Jan 10 18:25 wwn-0x5000039643c84283-part3 -> ../../sda3

================================ Mount points: =================================

Device           Mount_Point              Type       Options

/dev/sda1        /boot/efi                vfat       (rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=iso8859-1,shortname=mixed,errors=remount-ro)
/dev/sda2        /                        ext4       (rw,relatime,errors=remount-ro,data=ordered)


========================== sda1/EFI/ubuntu/grub.cfg: ===========================

--------------------------------------------------------------------------------
search.fs_uuid 3ffa830d-e2f6-4e21-887f-54deffa6a028 root hd0,gpt2 
set prefix=($root)'/boot/grub'
configfile $prefix/grub.cfg
--------------------------------------------------------------------------------

=========================== sda2/boot/grub/grub.cfg: ===========================

--------------------------------------------------------------------------------
#
# DO NOT EDIT THIS FILE
#
# It is automatically generated by grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
#

### BEGIN /etc/grub.d/00_header ###
if [ -s $prefix/grubenv ]; then
  set have_grubenv=true
  load_env
fi
if [ "${next_entry}" ] ; then
   set default="${next_entry}"
   set next_entry=
   save_env next_entry
   set boot_once=true
else
   set default="0"
fi

if [ x"${feature_menuentry_id}" = xy ]; then
  menuentry_id_option="--id"
else
  menuentry_id_option=""
fi

export menuentry_id_option

if [ "${prev_saved_entry}" ]; then
  set saved_entry="${prev_saved_entry}"
  save_env saved_entry
  set prev_saved_entry=
  save_env prev_saved_entry
  set boot_once=true
fi

function savedefault {
  if [ -z "${boot_once}" ]; then
    saved_entry="${chosen}"
    save_env saved_entry
  fi
}
function recordfail {
  set recordfail=1
  if [ -n "${have_grubenv}" ]; then if [ -z "${boot_once}" ]; then save_env recordfail; fi; fi
}
function load_video {
  if [ x$feature_all_video_module = xy ]; then
    insmod all_video
  else
    insmod efi_gop
    insmod efi_uga
    insmod ieee1275_fb
    insmod vbe
    insmod vga
    insmod video_bochs
    insmod video_cirrus
  fi
}

if [ x$feature_default_font_path = xy ] ; then
   font=unicode
else
insmod part_gpt
insmod ext2
set root='hd0,gpt2'
if [ x$feature_platform_search_hint = xy ]; then
  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt2 --hint-efi=hd0,gpt2 --hint-baremetal=ahci0,gpt2  3ffa830d-e2f6-4e21-887f-54deffa6a028
else
  search --no-floppy --fs-uuid --set=root 3ffa830d-e2f6-4e21-887f-54deffa6a028
fi
    font="/usr/share/grub/unicode.pf2"
fi

if loadfont $font ; then
  set gfxmode=auto
  load_video
  insmod gfxterm
  set locale_dir=$prefix/locale
  set lang=fr_FR
  insmod gettext
fi
terminal_output gfxterm
if [ "${recordfail}" = 1 ] ; then
  set timeout=30
else
  if [ x$feature_timeout_style = xy ] ; then
    set timeout_style=hidden
    set timeout=0
  # Fallback hidden-timeout code in case the timeout_style feature is
  # unavailable.
  elif sleep --interruptible 0 ; then
    set timeout=0
  fi
fi
### END /etc/grub.d/00_header ###

### BEGIN /etc/grub.d/05_debian_theme ###
set menu_color_normal=white/black
set menu_color_highlight=black/light-gray
if background_color 44,0,30,0; then
  clear
fi
### END /etc/grub.d/05_debian_theme ###

### BEGIN /etc/grub.d/10_linux ###
function gfxmode {
	set gfxpayload="${1}"
	if [ "${1}" = "keep" ]; then
		set vt_handoff=vt.handoff=1
	else
		set vt_handoff=
	fi
}
if [ "${recordfail}" != 1 ]; then
  if [ -e ${prefix}/gfxblacklist.txt ]; then
    if hwmatch ${prefix}/gfxblacklist.txt 3; then
      if [ ${match} = 0 ]; then
        set linux_gfx_mode=keep
      else
        set linux_gfx_mode=text
      fi
    else
      set linux_gfx_mode=text
    fi
  else
    set linux_gfx_mode=keep
  fi
else
  set linux_gfx_mode=text
fi
export linux_gfx_mode
menuentry 'Ubuntu' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-simple-3ffa830d-e2f6-4e21-887f-54deffa6a028' {
	recordfail
	load_video
	gfxmode $linux_gfx_mode
	insmod gzio
	if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
	insmod part_gpt
	insmod ext2
	set root='hd0,gpt2'
	if [ x$feature_platform_search_hint = xy ]; then
	  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt2 --hint-efi=hd0,gpt2 --hint-baremetal=ahci0,gpt2  3ffa830d-e2f6-4e21-887f-54deffa6a028
	else
	  search --no-floppy --fs-uuid --set=root 3ffa830d-e2f6-4e21-887f-54deffa6a028
	fi
        linux	/boot/vmlinuz-4.15.0-43-generic root=UUID=3ffa830d-e2f6-4e21-887f-54deffa6a028 ro  quiet splash $vt_handoff
	initrd	/boot/initrd.img-4.15.0-43-generic
}
submenu 'Options avancées pour Ubuntu' $menuentry_id_option 'gnulinux-advanced-3ffa830d-e2f6-4e21-887f-54deffa6a028' {
	menuentry 'Ubuntu, avec Linux 4.15.0-43-generic' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.15.0-43-generic-advanced-3ffa830d-e2f6-4e21-887f-54deffa6a028' {
		recordfail
		load_video
		gfxmode $linux_gfx_mode
		insmod gzio
		if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
		insmod part_gpt
		insmod ext2
		set root='hd0,gpt2'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt2 --hint-efi=hd0,gpt2 --hint-baremetal=ahci0,gpt2  3ffa830d-e2f6-4e21-887f-54deffa6a028
		else
		  search --no-floppy --fs-uuid --set=root 3ffa830d-e2f6-4e21-887f-54deffa6a028
		fi
		echo	'Chargement de Linux 4.15.0-43-generic…'
	        linux	/boot/vmlinuz-4.15.0-43-generic root=UUID=3ffa830d-e2f6-4e21-887f-54deffa6a028 ro  quiet splash $vt_handoff
		echo	'Chargement du disque mémoire initial…'
		initrd	/boot/initrd.img-4.15.0-43-generic
	}
	menuentry 'Ubuntu, with Linux 4.15.0-43-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.15.0-43-generic-recovery-3ffa830d-e2f6-4e21-887f-54deffa6a028' {
		recordfail
		load_video
		insmod gzio
		if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
		insmod part_gpt
		insmod ext2
		set root='hd0,gpt2'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt2 --hint-efi=hd0,gpt2 --hint-baremetal=ahci0,gpt2  3ffa830d-e2f6-4e21-887f-54deffa6a028
		else
		  search --no-floppy --fs-uuid --set=root 3ffa830d-e2f6-4e21-887f-54deffa6a028
		fi
		echo	'Chargement de Linux 4.15.0-43-generic…'
	        linux	/boot/vmlinuz-4.15.0-43-generic root=UUID=3ffa830d-e2f6-4e21-887f-54deffa6a028 ro recovery nomodeset 
		echo	'Chargement du disque mémoire initial…'
		initrd	/boot/initrd.img-4.15.0-43-generic
	}
	menuentry 'Ubuntu, avec Linux 4.15.0-42-generic' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.15.0-42-generic-advanced-3ffa830d-e2f6-4e21-887f-54deffa6a028' {
		recordfail
		load_video
		gfxmode $linux_gfx_mode
		insmod gzio
		if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
		insmod part_gpt
		insmod ext2
		set root='hd0,gpt2'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt2 --hint-efi=hd0,gpt2 --hint-baremetal=ahci0,gpt2  3ffa830d-e2f6-4e21-887f-54deffa6a028
		else
		  search --no-floppy --fs-uuid --set=root 3ffa830d-e2f6-4e21-887f-54deffa6a028
		fi
		echo	'Chargement de Linux 4.15.0-42-generic…'
	        linux	/boot/vmlinuz-4.15.0-42-generic root=UUID=3ffa830d-e2f6-4e21-887f-54deffa6a028 ro  quiet splash $vt_handoff
		echo	'Chargement du disque mémoire initial…'
		initrd	/boot/initrd.img-4.15.0-42-generic
	}
	menuentry 'Ubuntu, with Linux 4.15.0-42-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.15.0-42-generic-recovery-3ffa830d-e2f6-4e21-887f-54deffa6a028' {
		recordfail
		load_video
		insmod gzio
		if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
		insmod part_gpt
		insmod ext2
		set root='hd0,gpt2'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt2 --hint-efi=hd0,gpt2 --hint-baremetal=ahci0,gpt2  3ffa830d-e2f6-4e21-887f-54deffa6a028
		else
		  search --no-floppy --fs-uuid --set=root 3ffa830d-e2f6-4e21-887f-54deffa6a028
		fi
		echo	'Chargement de Linux 4.15.0-42-generic…'
	        linux	/boot/vmlinuz-4.15.0-42-generic root=UUID=3ffa830d-e2f6-4e21-887f-54deffa6a028 ro recovery nomodeset 
		echo	'Chargement du disque mémoire initial…'
		initrd	/boot/initrd.img-4.15.0-42-generic
	}
	menuentry 'Ubuntu, avec Linux 3.13.0-92-generic' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.13.0-92-generic-advanced-3ffa830d-e2f6-4e21-887f-54deffa6a028' {
		recordfail
		load_video
		gfxmode $linux_gfx_mode
		insmod gzio
		if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
		insmod part_gpt
		insmod ext2
		set root='hd0,gpt2'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt2 --hint-efi=hd0,gpt2 --hint-baremetal=ahci0,gpt2  3ffa830d-e2f6-4e21-887f-54deffa6a028
		else
		  search --no-floppy --fs-uuid --set=root 3ffa830d-e2f6-4e21-887f-54deffa6a028
		fi
		echo	'Chargement de Linux 3.13.0-92-generic…'
		linux	/boot/vmlinuz-3.13.0-92-generic.efi.signed root=UUID=3ffa830d-e2f6-4e21-887f-54deffa6a028 ro  quiet splash $vt_handoff
		echo	'Chargement du disque mémoire initial…'
		initrd	/boot/initrd.img-3.13.0-92-generic
	}
	menuentry 'Ubuntu, with Linux 3.13.0-92-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.13.0-92-generic-recovery-3ffa830d-e2f6-4e21-887f-54deffa6a028' {
		recordfail
		load_video
		insmod gzio
		if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
		insmod part_gpt
		insmod ext2
		set root='hd0,gpt2'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt2 --hint-efi=hd0,gpt2 --hint-baremetal=ahci0,gpt2  3ffa830d-e2f6-4e21-887f-54deffa6a028
		else
		  search --no-floppy --fs-uuid --set=root 3ffa830d-e2f6-4e21-887f-54deffa6a028
		fi
		echo	'Chargement de Linux 3.13.0-92-generic…'
		linux	/boot/vmlinuz-3.13.0-92-generic.efi.signed root=UUID=3ffa830d-e2f6-4e21-887f-54deffa6a028 ro recovery nomodeset 
		echo	'Chargement du disque mémoire initial…'
		initrd	/boot/initrd.img-3.13.0-92-generic
	}
}

### END /etc/grub.d/10_linux ###

### BEGIN /etc/grub.d/20_linux_xen ###

### END /etc/grub.d/20_linux_xen ###

### BEGIN /etc/grub.d/20_memtest86+ ###
### END /etc/grub.d/20_memtest86+ ###

### BEGIN /etc/grub.d/30_os-prober ###
### END /etc/grub.d/30_os-prober ###

### BEGIN /etc/grub.d/30_uefi-firmware ###
menuentry 'System setup' $menuentry_id_option 'uefi-firmware' {
	fwsetup
}
### END /etc/grub.d/30_uefi-firmware ###

### BEGIN /etc/grub.d/40_custom ###
# This file provides an easy way to add custom menu entries.  Simply type the
# menu entries you want to add after this comment.  Be careful not to change
# the 'exec tail' line above.
### END /etc/grub.d/40_custom ###

### BEGIN /etc/grub.d/41_custom ###
if [ -f  ${config_directory}/custom.cfg ]; then
  source ${config_directory}/custom.cfg
elif [ -z "${config_directory}" -a -f  $prefix/custom.cfg ]; then
  source $prefix/custom.cfg;
fi
### END /etc/grub.d/41_custom ###
--------------------------------------------------------------------------------

=============================== sda2/etc/fstab: ================================

--------------------------------------------------------------------------------
# /etc/fstab: static file system information.
#
# Use 'blkid' to print the universally unique identifier for a
# device; this may be used with UUID= as a more robust way to name devices
# that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point>   <type>  <options>       <dump>  <pass>
# / was on /dev/sda2 during installation
UUID=3ffa830d-e2f6-4e21-887f-54deffa6a028 /               ext4    errors=remount-ro 0       1
# /boot/efi was on /dev/sda1 during installation
UUID=92C3-DEDC  /boot/efi       vfat    defaults        0       1
# swap was on /dev/sda3 during installation
UUID=5b8ac08d-19b6-435d-b8ee-25e8eb0b8d56 none            swap    sw              0       0
--------------------------------------------------------------------------------

=================== sda2: Location of files loaded by Grub: ====================

           GiB - GB             File                                 Fragment(s)

 650.646934509 = 698.626826240  boot/grub/grub.cfg                             2
 584.428283691 = 627.525091328  boot/vmlinuz-3.13.0-92-generic                 2
 526.639225006 = 565.474562048  boot/vmlinuz-3.13.0-92-generic.efi.signed      1
 646.223526001 = 693.877227520  boot/vmlinuz-4.15.0-42-generic                 1
 645.399311066 = 692.992233472  boot/vmlinuz-4.15.0-43-generic                 1
 645.399311066 = 692.992233472  vmlinuz                                        1
 646.223526001 = 693.877227520  vmlinuz.old                                    1
 642.575233459 = 689.959903232  boot/initrd.img-3.13.0-92-generic              3
 646.474586487 = 694.146801664  boot/initrd.img-4.15.0-42-generic              3
 436.608169556 = 468.804452352  boot/initrd.img-4.15.0-43-generic              5
 436.608169556 = 468.804452352  initrd.img                                     5
 646.474586487 = 694.146801664  initrd.img.old                                 3

======================== Unknown MBRs/Boot Sectors/etc: ========================

Unknown BootLoader on sda1

00000000  30 04 00 4d 53 57 49 4e  34 2e 31 00 02 08 26 00  |0..MSWIN4.1...&.|
00000010  02 00 00 00 00 f8 00 00  3f 00 ff 00 00 08 00 00  |........?.......|
00000020  00 00 10 00 ff 03 00 00  00 00 00 00 04 00 00 00  |................|
00000030  01 00 06 00 00 00 00 00  00 00 00 00 00 00 00 00  |................|
00000040  80 01 29 dc de c3 92 4e  4f 20 4e 41 4d 45 20 20  |..)....NO NAME  |
00000050  20 20 46 41 54 33 32 20  20 20 00 00 2f 00 00 00  |  FAT32   ../...|
00000060  64 00 00 00 65 00 00 00  76 00 00 00 2f 00 00 00  |d...e...v.../...|
00000070  6c 00 00 00 6f 00 00 00  6f 00 00 00 70 00 00 00  |l...o...o...p...|
00000080  33 00 00 00 3a 00 00 00  20 00 00 00 54 00 00 00  |3...:... ...T...|
00000090  59 00 00 00 50 00 00 00  45 00 00 00 3d 00 00 00  |Y...P...E...=...|
000000a0  22 00 00 00 73 00 00 00  71 00 00 00 75 00 00 00  |"...s...q...u...|
000000b0  61 00 00 00 73 00 00 00  68 00 00 00 66 00 00 00  |a...s...h...f...|
000000c0  73 00 00 00 22 00 00 00  0a 00 00 00 2f 00 00 00  |s..."......./...|
000000d0  64 00 00 00 65 00 00 00  76 00 00 00 2f 00 00 00  |d...e...v.../...|
000000e0  6c 00 00 00 6f 00 00 00  6f 00 00 00 70 00 00 00  |l...o...o...p...|
000000f0  34 00 00 00 3a 00 00 00  20 00 00 00 54 00 00 00  |4...:... ...T...|
00000100  59 00 00 00 50 00 00 00  45 00 00 00 3d 00 00 00  |Y...P...E...=...|
00000110  22 00 00 00 73 00 00 00  71 00 00 00 75 00 00 00  |"...s...q...u...|
00000120  61 00 00 00 73 00 00 00  68 00 00 00 66 00 00 00  |a...s...h...f...|
00000130  73 00 00 00 22 00 00 00  0a 00 00 00 2f 00 00 00  |s..."......./...|
00000140  64 00 00 00 65 00 00 00  76 00 00 00 2f 00 00 00  |d...e...v.../...|
00000150  6c 00 00 00 6f 00 00 00  6f 00 00 00 70 00 00 00  |l...o...o...p...|
00000160  35 00 00 00 3a 00 00 00  20 00 00 00 54 00 00 00  |5...:... ...T...|
00000170  59 00 00 00 50 00 00 00  45 00 00 00 3d 00 00 00  |Y...P...E...=...|
00000180  22 00 00 00 73 00 00 00  71 00 00 00 75 00 00 00  |"...s...q...u...|
00000190  61 00 00 00 73 00 00 00  68 00 00 00 66 00 00 00  |a...s...h...f...|
000001a0  73 00 00 00 22 00 00 00  0a 00 00 00 2f 00 00 00  |s..."......./...|
000001b0  64 00 00 00 65 00 00 00  76 00 00 00 2f 00 00 00  |d...e...v.../...|
000001c0  6c 00 00 00 6f 00 00 00  6f 00 00 00 70 00 00 00  |l...o...o...p...|
000001d0  36 00 00 00 3a 00 00 00  20 00 00 00 54 00 00 00  |6...:... ...T...|
000001e0  59 00 00 00 50 00 00 00  45 00 00 00 3d 00 00 00  |Y...P...E...=...|
000001f0  22 00 00 00 73 00 00 00  71 00 00 00 75 00 55 aa  |"...s...q...u.U.|
00000200



ADDITIONAL INFORMATION :
=================== log of boot-repair 20190110_1823 ===================
boot-repair version : 4ppa65
boot-sav version : 4ppa65
boot-sav-extra version : 4ppa65
glade2script version : 3.2.3~ppa4
boot-repair is executed in installed-session (Ubuntu 18.04.1 LTS, bionic, Ubuntu, x86_64)
CPU op-mode(s):      32-bit, 64-bit
BOOT_IMAGE=/boot/vmlinuz-4.15.0-43-generic root=UUID=3ffa830d-e2f6-4e21-887f-54deffa6a028 ro recovery nomodeset

=================== os-prober:
/dev/sda2:L'OS actuellement utilisé - Ubuntu 18.04.1 LTS CurrentSession:linux

=================== blkid:
/dev/sda1: UUID="92C3-DEDC" TYPE="vfat" PARTUUID="b98d671e-be7b-4ae7-a66e-da3b45f8e3db"
/dev/sda2: UUID="3ffa830d-e2f6-4e21-887f-54deffa6a028" TYPE="ext4" PARTUUID="dddecd2f-6cbb-49cd-bba0-41b75be9c254"
/dev/loop0: TYPE="squashfs"
/dev/loop1: TYPE="squashfs"
/dev/loop2: TYPE="squashfs"
/dev/loop3: TYPE="squashfs"
/dev/loop4: TYPE="squashfs"
/dev/loop5: TYPE="squashfs"
/dev/loop6: TYPE="squashfs"
/dev/loop7: TYPE="squashfs"
/dev/loop8: TYPE="squashfs"


1 disks with OS, 1 OS : 1 Linux, 0 MacOS, 0 Windows, 0 unknown type OS.


=================== /etc/grub.d/ :
drwxr-xr-x  2 root root      4096 nov.  24 01:10 grub.d
total 80
-rwxr-xr-x 1 root root  9783 juil. 13 15:21 00_header
-rwxr-xr-x 1 root root  6258 mars  15  2016 05_debian_theme
-rwxr-xr-x 1 root root 12693 juil. 13 15:21 10_linux
-rwxr-xr-x 1 root root 11298 juil. 13 15:21 20_linux_xen
-rwxr-xr-x 1 root root  1992 mars  12  2014 20_memtest86+
-rwxr-xr-x 1 root root 12059 juil. 13 15:21 30_os-prober
-rwxr-xr-x 1 root root  1418 juin  17  2016 30_uefi-firmware
-rwxr-xr-x 1 root root   214 avril 11  2014 40_custom
-rwxr-xr-x 1 root root   216 avril 11  2014 41_custom
-rw-r--r-- 1 root root   483 avril 11  2014 README




=================== /etc/default/grub :

# If you change this file, run 'update-grub' afterwards to update
# /boot/grub/grub.cfg.
# For full documentation of the options in this file, see:
#   info -f grub -n 'Simple configuration'

GRUB_DEFAULT=0
GRUB_TIMEOUT_STYLE=hidden
GRUB_TIMEOUT=0
GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian`
GRUB_CMDLINE_LINUX_DEFAULT="quiet splash"
GRUB_CMDLINE_LINUX=""

# Uncomment to enable BadRAM filtering, modify to suit your needs
# This works with Linux (no patch required) and with any kernel that obtains
# the memory map information from GRUB (GNU Mach, kernel of FreeBSD ...)
#GRUB_BADRAM="0x01234567,0xfefefefe,0x89abcdef,0xefefefef"

# Uncomment to disable graphical terminal (grub-pc only)
#GRUB_TERMINAL=console

# The resolution used on graphical terminal
# note that you can use only modes which your graphic card supports via VBE
# you can see them in real GRUB with the command `vbeinfo'
#GRUB_GFXMODE=640x480

# Uncomment if you don't want GRUB to pass "root=UUID=xxx" parameter to Linux
#GRUB_DISABLE_LINUX_UUID=true

# Uncomment to disable generation of recovery mode menu entries
#GRUB_DISABLE_RECOVERY="true"

# Uncomment to get a beep at grub start
#GRUB_INIT_TUNE="480 440 1"



/boot/efi detected in the fstab of sda2: UUID=92C3-DEDC   (sda1)
Presence of EFI/Boot file detected: /boot/efi/EFI/Boot/fbx64.efi
/usr/share/boot-sav/bs-cmd_terminal.sh: ligne 179: avertissement : command substitution: ignored null byte in input

=================== efibootmgr -v
BootCurrent: 0000
Timeout: 0 seconds
BootOrder: 0000,2003,2001,2002
Boot0000* ubuntu	HD(1,GPT,b98d671e-be7b-4ae7-a66e-da3b45f8e3db,0x800,0x100000)/File(EFIubuntushimx64.efi)
Boot0001* Realtek PXE	PciRoot(0x0)/Pci(0x2,0x2)/Pci(0x0,0x0)/MAC(008cfa8d9db9,0)/IPv4(0.0.0.00.0.0.0,0,0)RC
Boot0002* Realtek PXE	PciRoot(0x0)/Pci(0x2,0x2)/Pci(0x0,0x0)/MAC(008cfa8d9db9,0)/IPv6([::]:<->[::]:,0,0)RC
Boot2001* EFI USB Device	RC
Boot2002* EFI DVD/CDROM	RC
Boot2003* EFI Network	RC

=================== UEFI/Legacy mode:
BIOS is EFI-compatible, and is setup in EFI-mode for this installed-session.
SecureBoot disabled. (maybe sec-boot, Veuillez indiquer ce message à boot.repair@gmail.com)


=================== PARTITIONS & DISKS:
sda2	: sda,	not-sepboot,	grubenv-ok	grub2,	signed grub-efi ,	update-grub,	64,	with-boot,	is-os,	not--efi--part,	fstab-without-boot,	fstab-has-goodEFI,	no-nt,	no-winload,	no-recov-nor-hid,	no-bmgr,	notwinboot,	apt-get,	grub-install,	with--usr,	fstab-without-usr,	not-sep-usr,	standard,	farbios,	notbiosboot, .
sda1	: sda,	not-sepboot,	no-grubenv	nogrub,	no-docgrub,	no-update-grub,	32,	no-boot,	no-os,	is-correct-EFI,	part-has-no-fstab,	part-has-no-fstab,	no-nt,	no-winload,	no-recov-nor-hid,	no-bmgr,	notwinboot,	nopakmgr,	nogrubinstall,	no---usr,	part-has-no-fstab,	not-sep-usr,	standard,	not-far,	notbiosboot, /boot/efi.

sda	: GPT,	no-BIOS_boot,	has-correctEFI, 	not-usb,	not-mmc, has-os,	2048 sectors * 512 bytes


=================== parted -lm:

BYT;
/dev/sda:1000GB:scsi:512:512:gpt:ATA TOSHIBA MQ01ABD1:;
1:1049kB:538MB:537MB:fat32::boot, esp;
2:538MB:996GB:996GB:ext4::;
3:996GB:1000GB:3717MB:linux-swap(v1)::;

=================== lsblk:
KNAME TYPE FSTYPE     SIZE LABEL
loop0 loop squashfs   4,7M
loop1 loop squashfs  88,2M
loop2 loop squashfs  89,5M
loop3 loop squashfs  89,5M
loop4 loop squashfs   4,9M
loop5 loop squashfs  87,3M
loop6 loop squashfs  87,3M
loop7 loop squashfs   7,5M
loop8 loop squashfs  87,3M
sda   disk          931,5G
sda1  part vfat       512M
sda2  part ext4     927,6G
sda3  part            3,5G
sr0   rom            1024M

KNAME ROTA RO RM STATE   MOUNTPOINT
loop0    1  1  0         /snap/canonical-livepatch/49
loop1    1  1  0         /snap/core/5897
loop2    1  1  0         /snap/core/6034
loop3    1  1  0         /snap/core/6130
loop4    1  1  0         /snap/canonical-livepatch/50
loop5    1  1  0         /snap/ubuntu-mate-welcome/208
loop6    1  1  0         /snap/ubuntu-mate-welcome/220
loop7    1  1  0         /snap/canonical-livepatch/54
loop8    1  1  0         /snap/ubuntu-mate-welcome/217
sda      1  0  0 running
sda1     1  0  0         /boot/efi
sda2     1  0  0         /
sda3     1  0  0
sr0      1  0  1 running


=================== mount:
sysfs on /sys type sysfs (rw,nosuid,nodev,noexec,relatime)
proc on /proc type proc (rw,nosuid,nodev,noexec,relatime)
udev on /dev type devtmpfs (rw,nosuid,relatime,size=1711648k,nr_inodes=427912,mode=755)
devpts on /dev/pts type devpts (rw,nosuid,noexec,relatime,gid=5,mode=620,ptmxmode=000)
tmpfs on /run type tmpfs (rw,nosuid,noexec,relatime,size=348388k,mode=755)
/dev/sda2 on / type ext4 (rw,relatime,errors=remount-ro,data=ordered)
securityfs on /sys/kernel/security type securityfs (rw,nosuid,nodev,noexec,relatime)
tmpfs on /dev/shm type tmpfs (rw,nosuid,nodev)
tmpfs on /run/lock type tmpfs (rw,nosuid,nodev,noexec,relatime,size=5120k)
tmpfs on /sys/fs/cgroup type tmpfs (ro,nosuid,nodev,noexec,mode=755)
cgroup on /sys/fs/cgroup/unified type cgroup2 (rw,nosuid,nodev,noexec,relatime,nsdelegate)
cgroup on /sys/fs/cgroup/systemd type cgroup (rw,nosuid,nodev,noexec,relatime,xattr,name=systemd)
pstore on /sys/fs/pstore type pstore (rw,nosuid,nodev,noexec,relatime)
efivarfs on /sys/firmware/efi/efivars type efivarfs (rw,nosuid,nodev,noexec,relatime)
cgroup on /sys/fs/cgroup/rdma type cgroup (rw,nosuid,nodev,noexec,relatime,rdma)
cgroup on /sys/fs/cgroup/cpu,cpuacct type cgroup (rw,nosuid,nodev,noexec,relatime,cpu,cpuacct)
cgroup on /sys/fs/cgroup/devices type cgroup (rw,nosuid,nodev,noexec,relatime,devices)
cgroup on /sys/fs/cgroup/memory type cgroup (rw,nosuid,nodev,noexec,relatime,memory)
cgroup on /sys/fs/cgroup/net_cls,net_prio type cgroup (rw,nosuid,nodev,noexec,relatime,net_cls,net_prio)
cgroup on /sys/fs/cgroup/freezer type cgroup (rw,nosuid,nodev,noexec,relatime,freezer)
cgroup on /sys/fs/cgroup/perf_event type cgroup (rw,nosuid,nodev,noexec,relatime,perf_event)
cgroup on /sys/fs/cgroup/cpuset type cgroup (rw,nosuid,nodev,noexec,relatime,cpuset)
cgroup on /sys/fs/cgroup/pids type cgroup (rw,nosuid,nodev,noexec,relatime,pids)
cgroup on /sys/fs/cgroup/hugetlb type cgroup (rw,nosuid,nodev,noexec,relatime,hugetlb)
cgroup on /sys/fs/cgroup/blkio type cgroup (rw,nosuid,nodev,noexec,relatime,blkio)
systemd-1 on /proc/sys/fs/binfmt_misc type autofs (rw,relatime,fd=36,pgrp=1,timeout=0,minproto=5,maxproto=5,direct,pipe_ino=13972)
hugetlbfs on /dev/hugepages type hugetlbfs (rw,relatime,pagesize=2M)
mqueue on /dev/mqueue type mqueue (rw,relatime)
debugfs on /sys/kernel/debug type debugfs (rw,relatime)
fusectl on /sys/fs/fuse/connections type fusectl (rw,relatime)
configfs on /sys/kernel/config type configfs (rw,relatime)
/dev/sda1 on /boot/efi type vfat (rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=iso8859-1,shortname=mixed,errors=remount-ro)
/var/lib/snapd/snaps/canonical-livepatch_49.snap on /snap/canonical-livepatch/49 type squashfs (ro,nodev,relatime,x-gdu.hide)
/var/lib/snapd/snaps/core_5897.snap on /snap/core/5897 type squashfs (ro,nodev,relatime,x-gdu.hide)
/var/lib/snapd/snaps/core_6034.snap on /snap/core/6034 type squashfs (ro,nodev,relatime,x-gdu.hide)
/var/lib/snapd/snaps/core_6130.snap on /snap/core/6130 type squashfs (ro,nodev,relatime,x-gdu.hide)
/var/lib/snapd/snaps/canonical-livepatch_50.snap on /snap/canonical-livepatch/50 type squashfs (ro,nodev,relatime,x-gdu.hide)
/var/lib/snapd/snaps/ubuntu-mate-welcome_208.snap on /snap/ubuntu-mate-welcome/208 type squashfs (ro,nodev,relatime,x-gdu.hide)
/var/lib/snapd/snaps/ubuntu-mate-welcome_220.snap on /snap/ubuntu-mate-welcome/220 type squashfs (ro,nodev,relatime,x-gdu.hide)
/var/lib/snapd/snaps/ubuntu-mate-welcome_217.snap on /snap/ubuntu-mate-welcome/217 type squashfs (ro,nodev,relatime,x-gdu.hide)
/var/lib/snapd/snaps/canonical-livepatch_54.snap on /snap/canonical-livepatch/54 type squashfs (ro,nodev,relatime,x-gdu.hide)
tmpfs on /run/snapd/ns type tmpfs (rw,nosuid,noexec,relatime,size=348388k,mode=755)
nsfs on /run/snapd/ns/canonical-livepatch.mnt type nsfs (rw)
tmpfs on /run/user/123 type tmpfs (rw,nosuid,nodev,relatime,size=348384k,mode=700,uid=123,gid=130)
tmpfs on /run/user/1000 type tmpfs (rw,nosuid,nodev,relatime,size=348384k,mode=700,uid=1000,gid=1000)
gvfsd-fuse on /run/user/1000/gvfs type fuse.gvfsd-fuse (rw,nosuid,nodev,relatime,user_id=1000,group_id=1000)


=================== ls:
/sys/block/sda (filtered):  alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range hidden holders inflight integrity power queue range removable ro sda1 sda2 sda3 size slaves stat subsystem trace uevent
/sys/block/sr0 (filtered):  alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range hidden holders inflight integrity power queue range removable ro size slaves stat subsystem trace uevent
/dev (filtered):  autofs block bsg btrfs-control bus cdrom cdrw char console core cpu cpu_dma_latency cuse disk dvd dvdrw ecryptfs fb0 fd full fuse hpet hugepages hwrng initctl input kmsg kvm lightnvm log mapper mcelog mem memory_bandwidth mqueue net network_latency network_throughput null port ppp psaux ptmx pts random rfkill rtc rtc0 sda sda1 sda2 sda3 sg0 sg1 shm snapshot snd sr0 stderr stdin stdout toshiba_acpi uhid uinput urandom userio vfio vga_arbiter vhci vhost-net vhost-vsock zero
ls /dev/mapper:  control

=================== hexdump -n512 -C /dev/sda1
00000000  30 04 00 4d 53 57 49 4e  34 2e 31 00 02 08 26 00  |0..MSWIN4.1...&.|
00000010  02 00 00 00 00 f8 00 00  3f 00 ff 00 00 08 00 00  |........?.......|
00000020  00 00 10 00 ff 03 00 00  00 00 00 00 04 00 00 00  |................|
00000030  01 00 06 00 00 00 00 00  00 00 00 00 00 00 00 00  |................|
00000040  80 01 29 dc de c3 92 4e  4f 20 4e 41 4d 45 20 20  |..)....NO NAME  |
00000050  20 20 46 41 54 33 32 20  20 20 00 00 2f 00 00 00  |  FAT32   ../...|
00000060  64 00 00 00 65 00 00 00  76 00 00 00 2f 00 00 00  |d...e...v.../...|
00000070  6c 00 00 00 6f 00 00 00  6f 00 00 00 70 00 00 00  |l...o...o...p...|
00000080  33 00 00 00 3a 00 00 00  20 00 00 00 54 00 00 00  |3...:... ...T...|
00000090  59 00 00 00 50 00 00 00  45 00 00 00 3d 00 00 00  |Y...P...E...=...|
000000a0  22 00 00 00 73 00 00 00  71 00 00 00 75 00 00 00  |"...s...q...u...|
000000b0  61 00 00 00 73 00 00 00  68 00 00 00 66 00 00 00  |a...s...h...f...|
000000c0  73 00 00 00 22 00 00 00  0a 00 00 00 2f 00 00 00  |s..."......./...|
000000d0  64 00 00 00 65 00 00 00  76 00 00 00 2f 00 00 00  |d...e...v.../...|
000000e0  6c 00 00 00 6f 00 00 00  6f 00 00 00 70 00 00 00  |l...o...o...p...|
000000f0  34 00 00 00 3a 00 00 00  20 00 00 00 54 00 00 00  |4...:... ...T...|
00000100  59 00 00 00 50 00 00 00  45 00 00 00 3d 00 00 00  |Y...P...E...=...|
00000110  22 00 00 00 73 00 00 00  71 00 00 00 75 00 00 00  |"...s...q...u...|
00000120  61 00 00 00 73 00 00 00  68 00 00 00 66 00 00 00  |a...s...h...f...|
00000130  73 00 00 00 22 00 00 00  0a 00 00 00 2f 00 00 00  |s..."......./...|
00000140  64 00 00 00 65 00 00 00  76 00 00 00 2f 00 00 00  |d...e...v.../...|
00000150  6c 00 00 00 6f 00 00 00  6f 00 00 00 70 00 00 00  |l...o...o...p...|
00000160  35 00 00 00 3a 00 00 00  20 00 00 00 54 00 00 00  |5...:... ...T...|
00000170  59 00 00 00 50 00 00 00  45 00 00 00 3d 00 00 00  |Y...P...E...=...|
00000180  22 00 00 00 73 00 00 00  71 00 00 00 75 00 00 00  |"...s...q...u...|
00000190  61 00 00 00 73 00 00 00  68 00 00 00 66 00 00 00  |a...s...h...f...|
000001a0  73 00 00 00 22 00 00 00  0a 00 00 00 2f 00 00 00  |s..."......./...|
000001b0  64 00 00 00 65 00 00 00  76 00 00 00 2f 00 00 00  |d...e...v.../...|
000001c0  6c 00 00 00 6f 00 00 00  6f 00 00 00 70 00 00 00  |l...o...o...p...|
000001d0  36 00 00 00 3a 00 00 00  20 00 00 00 54 00 00 00  |6...:... ...T...|
000001e0  59 00 00 00 50 00 00 00  45 00 00 00 3d 00 00 00  |Y...P...E...=...|
000001f0  22 00 00 00 73 00 00 00  71 00 00 00 75 00 55 aa  |"...s...q...u.U.|
00000200

=================== df -Th:

Filesystem     Type      Size  Used Avail Use% Mounted on
udev           devtmpfs  1.7G     0  1.7G   0% /dev
tmpfs          tmpfs     341M  1.9M  339M   1% /run
/dev/sda2      ext4      913G  493G  375G  57% /
tmpfs          tmpfs     1.7G     0  1.7G   0% /dev/shm
tmpfs          tmpfs     5.0M  4.0K  5.0M   1% /run/lock
tmpfs          tmpfs     1.7G     0  1.7G   0% /sys/fs/cgroup
/dev/sda1      vfat      511M  6.1M  505M   2% /boot/efi
/dev/loop0     squashfs  4.8M  4.8M     0 100% /snap/canonical-livepatch/49
/dev/loop1     squashfs   89M   89M     0 100% /snap/core/5897
/dev/loop2     squashfs   90M   90M     0 100% /snap/core/6034
/dev/loop3     squashfs   90M   90M     0 100% /snap/core/6130
/dev/loop4     squashfs  5.0M  5.0M     0 100% /snap/canonical-livepatch/50
/dev/loop5     squashfs   88M   88M     0 100% /snap/ubuntu-mate-welcome/208
/dev/loop6     squashfs   88M   88M     0 100% /snap/ubuntu-mate-welcome/220
/dev/loop8     squashfs   88M   88M     0 100% /snap/ubuntu-mate-welcome/217
/dev/loop7     squashfs  7.5M  7.5M     0 100% /snap/canonical-livepatch/54
tmpfs          tmpfs     341M   16K  341M   1% /run/user/123
tmpfs          tmpfs     341M   24K  341M   1% /run/user/1000

=================== fdisk -l:
Disk /dev/loop0: 4.7 MiB, 4919296 bytes, 9608 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes


Disk /dev/loop1: 88.2 MiB, 92483584 bytes, 180632 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes


Disk /dev/loop2: 89.5 MiB, 93818880 bytes, 183240 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes


Disk /dev/loop3: 89.5 MiB, 93835264 bytes, 183272 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes


Disk /dev/loop4: 4.9 MiB, 5148672 bytes, 10056 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes


Disk /dev/loop5: 87.3 MiB, 91504640 bytes, 178720 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes


Disk /dev/loop6: 87.3 MiB, 91504640 bytes, 178720 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes


Disk /dev/loop7: 7.5 MiB, 7811072 bytes, 15256 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes


Disk /dev/sda: 931.5 GiB, 1000204886016 bytes, 1953525168 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: gpt
Disk identifier: 46A49CD0-B6E8-4DB3-9211-7A3CF67B62A4

Device          Start        End    Sectors   Size Type
/dev/sda1        2048    1050623    1048576   512M EFI System
/dev/sda2     1050624 1946263551 1945212928 927.6G Linux filesystem
/dev/sda3  1946263552 1953523711    7260160   3.5G Linux swap




Disk /dev/loop8: 87.3 MiB, 91504640 bytes, 178720 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes




=================== Suggested repair
The default repair of the Boot-Repair utility would reinstall the grub-efi-amd64-signed of sda2, using the following options:        sda1/boot/efi,
Additional repair would be performed: unhide-bootmenu-10s    use-standard-efi-file


=================== Final advice in case of suggested repair
N'oubliez pas de régler votre BIOS pour qu'il amorce sur le fichier sda1/efi/.../grub*.efi !


=================== User settings
The settings chosen by the user will not act on the boot.

Hors ligne

#8 Le 10/01/2019, à 19:41

Toynoy

Re : Problème démarrage Ubuntu 18.04.1 LTS

ubuntu18a a écrit :

Bonsoir.
Penses aussi à donner le retour de cette commande

sudo smartctl -s on -a /dev/sda

Il faudra probablement que tu installes le logiciel smartmontools


J'ai (et je ne comprend toujours pas pourquoi) réussi a installer ton paquet et lancé la commande que tu m'as conseillé! voici le retour

smartctl 6.6 2016-05-31 r4324 [x86_64-linux-4.15.0-43-generic] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Model Family:     Toshiba 2.5" HDD MQ01ABD...
Device Model:     TOSHIBA MQ01ABD100
Serial Number:    55BKC1EWT
LU WWN Device Id: 5 000039 643c84283
Firmware Version: AX1P4M
User Capacity:    1000204886016 bytes [1,00 TB]
Sector Size:      512 bytes logical/physical
Rotation Rate:    5400 rpm
Form Factor:      2.5 inches
Device is:        In smartctl database [for details use: -P show]
ATA Version is:   ATA8-ACS (minor revision not indicated)
SATA Version is:  SATA 2.6, 3.0 Gb/s (current: 3.0 Gb/s)
Local Time is:    Thu Jan 10 18:38:15 2019 CET
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF ENABLE/DISABLE COMMANDS SECTION ===
SMART Enabled.

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x00)	Offline data collection activity
					was never started.
					Auto Offline Data Collection: Disabled.
Self-test execution status:      (   0)	The previous self-test routine completed
					without error or no self-test has ever 
					been run.
Total time to complete Offline 
data collection: 		(  120) seconds.
Offline data collection
capabilities: 			 (0x5b) SMART execute Offline immediate.
					Auto Offline data collection on/off support.
					Suspend Offline collection upon new
					command.
					Offline surface scan supported.
					Self-test supported.
					No Conveyance Self-test supported.
					Selective Self-test supported.
SMART capabilities:            (0x0003)	Saves SMART data before entering
					power-saving mode.
					Supports SMART auto save timer.
Error logging capability:        (0x01)	Error logging supported.
					General Purpose Logging supported.
Short self-test routine 
recommended polling time: 	 (   2) minutes.
Extended self-test routine
recommended polling time: 	 ( 244) minutes.
SCT capabilities: 	       (0x003d)	SCT Status supported.
					SCT Error Recovery Control supported.
					SCT Feature Control supported.
					SCT Data Table supported.

SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  1 Raw_Read_Error_Rate     0x000b   100   100   050    Pre-fail  Always       -       0
  2 Throughput_Performance  0x0005   100   100   050    Pre-fail  Offline      -       0
  3 Spin_Up_Time            0x0027   100   100   001    Pre-fail  Always       -       1734
  4 Start_Stop_Count        0x0032   100   100   000    Old_age   Always       -       944
  5 Reallocated_Sector_Ct   0x0033   100   100   050    Pre-fail  Always       -       0
  7 Seek_Error_Rate         0x000b   100   100   050    Pre-fail  Always       -       0
  8 Seek_Time_Performance   0x0005   100   100   050    Pre-fail  Offline      -       0
  9 Power_On_Hours          0x0032   054   054   000    Old_age   Always       -       18610
 10 Spin_Retry_Count        0x0033   118   100   030    Pre-fail  Always       -       0
 12 Power_Cycle_Count       0x0032   100   100   000    Old_age   Always       -       940
191 G-Sense_Error_Rate      0x0032   100   100   000    Old_age   Always       -       9298
192 Power-Off_Retract_Count 0x0032   100   100   000    Old_age   Always       -       43
193 Load_Cycle_Count        0x0032   097   097   000    Old_age   Always       -       31009
194 Temperature_Celsius     0x0022   100   100   000    Old_age   Always       -       38 (Min/Max 12/51)
196 Reallocated_Event_Count 0x0032   100   100   000    Old_age   Always       -       0
197 Current_Pending_Sector  0x0032   100   100   000    Old_age   Always       -       232
198 Offline_Uncorrectable   0x0030   100   100   000    Old_age   Offline      -       0
199 UDMA_CRC_Error_Count    0x0032   200   200   000    Old_age   Always       -       0
220 Disk_Shift              0x0002   100   100   000    Old_age   Always       -       0
222 Loaded_Hours            0x0032   056   056   000    Old_age   Always       -       17726
223 Load_Retry_Count        0x0032   100   100   000    Old_age   Always       -       0
224 Load_Friction           0x0022   100   100   000    Old_age   Always       -       0
226 Load-in_Time            0x0026   100   100   000    Old_age   Always       -       268
240 Head_Flying_Hours       0x0001   100   100   001    Pre-fail  Offline      -       0

SMART Error Log Version: 1
ATA Error Count: 1564 (device log contains only the most recent five errors)
	CR = Command Register [HEX]
	FR = Features Register [HEX]
	SC = Sector Count Register [HEX]
	SN = Sector Number Register [HEX]
	CL = Cylinder Low Register [HEX]
	CH = Cylinder High Register [HEX]
	DH = Device/Head Register [HEX]
	DC = Device Command Register [HEX]
	ER = Error register [HEX]
	ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.

Error 1564 occurred at disk power-on lifetime: 18610 hours (775 days + 10 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  40 41 d8 08 a0 01 40  Error: UNC at LBA = 0x0001a008 = 106504

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  60 08 d8 08 a0 01 40 00      00:20:01.174  READ FPDMA QUEUED
  ef 10 02 00 00 00 a0 00      00:20:01.174  SET FEATURES [Enable SATA feature]
  27 00 00 00 00 00 e0 00      00:20:01.173  READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]
  ec 00 00 00 00 00 a0 00      00:20:01.172  IDENTIFY DEVICE
  ef 03 45 00 00 00 a0 00      00:20:01.172  SET FEATURES [Set transfer mode]

Error 1563 occurred at disk power-on lifetime: 18610 hours (775 days + 10 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  40 41 d0 08 a0 01 40  Error: UNC at LBA = 0x0001a008 = 106504

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  60 08 d0 08 a0 01 40 00      00:19:57.411  READ FPDMA QUEUED
  60 08 c8 00 a0 01 40 00      00:19:57.400  READ FPDMA QUEUED
  60 08 c0 f0 67 70 40 00      00:19:57.398  READ FPDMA QUEUED
  60 08 b8 80 67 70 40 00      00:19:57.380  READ FPDMA QUEUED
  60 08 a0 00 08 90 40 00      00:19:57.323  READ FPDMA QUEUED

Error 1562 occurred at disk power-on lifetime: 18610 hours (775 days + 10 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  40 41 d0 08 a0 01 40  Error: UNC at LBA = 0x0001a008 = 106504

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  60 20 d0 00 a0 01 40 00      00:19:53.409  READ FPDMA QUEUED
  61 08 c8 40 27 d5 40 00      00:19:53.409  WRITE FPDMA QUEUED
  ea 00 00 00 00 00 a0 00      00:19:53.237  FLUSH CACHE EXT
  61 08 b0 90 0d 10 40 00      00:19:53.237  WRITE FPDMA QUEUED
  61 30 a8 00 a3 97 40 00      00:19:53.237  WRITE FPDMA QUEUED

Error 1561 occurred at disk power-on lifetime: 18610 hours (775 days + 10 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  40 41 60 08 a0 01 40  Error: UNC at LBA = 0x0001a008 = 106504

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  60 08 60 08 a0 01 40 00      00:19:49.430  READ FPDMA QUEUED
  61 08 10 e8 08 10 40 00      00:19:49.430  WRITE FPDMA QUEUED
  61 08 e0 70 08 10 40 00      00:19:49.430  WRITE FPDMA QUEUED
  ea 00 00 00 00 00 a0 00      00:19:49.430  FLUSH CACHE EXT
  ef 10 02 00 00 00 a0 00      00:19:49.429  SET FEATURES [Enable SATA feature]

Error 1560 occurred at disk power-on lifetime: 18610 hours (775 days + 10 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  40 41 b0 08 a0 01 40  Error: UNC at LBA = 0x0001a008 = 106504

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  60 08 b0 08 a0 01 40 00      00:19:45.630  READ FPDMA QUEUED
  61 08 a8 f0 26 d5 40 00      00:19:45.630  WRITE FPDMA QUEUED
  ea 00 00 00 00 00 a0 00      00:19:45.600  FLUSH CACHE EXT
  61 30 90 c0 26 d5 40 00      00:19:45.594  WRITE FPDMA QUEUED
  60 08 88 00 a0 01 40 00      00:19:45.586  READ FPDMA QUEUED

SMART Self-test log structure revision number 1
Num  Test_Description    Status                  Remaining  LifeTime(hours)  LBA_of_first_error
# 1  Short offline       Completed without error       00%         1         -

SMART Selective self-test log data structure revision number 1
 SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1        0        0  Not_testing
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
    5        0        0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.

Hors ligne

#9 Le 10/01/2019, à 20:07

arverne73

Re : Problème démarrage Ubuntu 18.04.1 LTS

Bonjour,
Suggestion pour sauvegarder les fichiers utilisateurs : si le système est très instable, un démarrage sur un live-cd (ou clé USB) devrait permettre de lancer un système fonctionnel puis d'avoir accès au dossier utilisateur sur le disque dur pour le sauvegarder... sauf si le disque en question a un problème matériel le rendant illisible.
Je me trompe ?


J-Paul - Utilisateur Ubuntu depuis 2006
Disco 19.04 Wayland AMD FX et carte graphique AMD Radeon HD 6850

Hors ligne

#10 Le 10/01/2019, à 21:27

Toynoy

Re : Problème démarrage Ubuntu 18.04.1 LTS

arverne73 a écrit :

Bonjour,
Suggestion pour sauvegarder les fichiers utilisateurs : si le système est très instable, un démarrage sur un live-cd (ou clé USB) devrait permettre de lancer un système fonctionnel puis d'avoir accès au dossier utilisateur sur le disque dur pour le sauvegarder... sauf si le disque en question a un problème matériel le rendant illisible.
Je me trompe ?


Pour l'instant j'ai réussi à sauvegarder la quasi totalité de mes données, je n'ai pas l'impression que le disque soit touché, mais merci du conseil!:)

Hors ligne

#11 Le 11/01/2019, à 00:23

ubuntu18a

Re : Problème démarrage Ubuntu 18.04.1 LTS

Toynoy a écrit :

Bonsoir.

sudo smartctl -s on -a /dev/sda

=== START OF INFORMATION SECTION ===
Model Family:     Toshiba 2.5" HDD MQ01ABD...
Device Model:     TOSHIBA MQ01ABD100
User Capacity:    1000204886016 bytes [1,00 TB]
Sector Size:      512 bytes logical/physical

ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  9 Power_On_Hours          0x0032   054   054   000    Old_age   Always       -       18610
197 Current_Pending_Sector  0x0032   100   100   000    Old_age   Always       -       232

ATA Error Cout 1564

Error 1564 occurred at disk power-on lifetime: 18610 hours Error: UNC at LBA =106504

Bonsoir.
Ton disque n'est pas en aussi bon état que tu le crois
il y a 1564 erreurs de lecture  portant sur 232 secteurs.  La dernière vient de  se produire.
Une amélioration serait possible en reformatant la partition  contenant le secteur 106504

C'est la partition sda1 servant au boot.
Pour les autres secteurs, ils ne sont pas listés donc certainement le même style de réparation pour les autres partitions. Ou alors attendre pour voir si le problème s'aggrave.

Dernière modification par ubuntu18a (Le 11/01/2019, à 00:38)

Hors ligne

#12 Le 11/01/2019, à 14:18

Toynoy

Re : Problème démarrage Ubuntu 18.04.1 LTS

ubuntu18a a écrit :
Toynoy a écrit :

Bonsoir.

sudo smartctl -s on -a /dev/sda

=== START OF INFORMATION SECTION ===
Model Family:     Toshiba 2.5" HDD MQ01ABD...
Device Model:     TOSHIBA MQ01ABD100
User Capacity:    1000204886016 bytes [1,00 TB]
Sector Size:      512 bytes logical/physical

ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  9 Power_On_Hours          0x0032   054   054   000    Old_age   Always       -       18610
197 Current_Pending_Sector  0x0032   100   100   000    Old_age   Always       -       232

ATA Error Cout 1564

Error 1564 occurred at disk power-on lifetime: 18610 hours Error: UNC at LBA =106504

Bonsoir.
Ton disque n'est pas en aussi bon état que tu le crois
il y a 1564 erreurs de lecture  portant sur 232 secteurs.  La dernière vient de  se produire.
Une amélioration serait possible en reformatant la partition  contenant le secteur 106504

C'est la partition sda1 servant au boot.
Pour les autres secteurs, ils ne sont pas listés donc certainement le même style de réparation pour les autres partitions. Ou alors attendre pour voir si le problème s'aggrave.

Merci de ton retour!
effectivement pas en si bon état.
est ce que lancer un boot repair améliorerait quelque chose ?
pour ce qui est du formatage de la partition sda1, je peux le faire avec Gparted ? ça supprimerait mes données ?(j'ai effectivement sauvegardé, c'est seulement pour savoir)

Hors ligne

#13 Le 11/01/2019, à 14:58

ubuntu18a

Re : Problème démarrage Ubuntu 18.04.1 LTS

Bonjour
BOOT-REPAIR ne travaille que sur le contenu des fichiers.
Cela supprimerait aussi tes fichiers de boot. Il faudrait donc à tout prix remettre la totalité des fichiers après le formatage fait par gparted en espérant qu'il n'y ait aucun plantage pendant l'opération...
A mon avis, tu pourrais créer une nouvelle partition FAT32 de taille équivalente. Y transférer tous les fichiers de boot, puis fabriquer une entrée nouvelle dans la nvram avec cette partition. Cela ferait un peu de sécurité.

Hors ligne

#14 Le 11/01/2019, à 15:14

malbo

Re : Problème démarrage Ubuntu 18.04.1 LTS

Bonjour,
ubuntu18a a fait le bon diagnostic dans le post #11 ("il y a 1564 erreurs de lecture  portant sur 232 secteurs. La dernière vient de se produire") mais ubuntu18a te laisse croire à une possibilité de "vivre avec". Ce n'est pas raisonnable. Il faut remplacer ce disque sans attendre.

Dernière modification par malbo (Le 11/01/2019, à 15:15)

Hors ligne