Contenu | Rechercher | Menus

Annonce

Si vous avez des soucis pour rester connecté, déconnectez-vous puis reconnectez-vous depuis ce lien en cochant la case
Me connecter automatiquement lors de mes prochaines visites.

À propos de l'équipe du forum.

#1 Le 27/01/2019, à 23:04

lool_lauris

Accéder aux dossiers cachés via VLC [RÉSOLU]

Salut,

Comment afficher les dossiers cachés dans VLC ? Je m'explique : j'ai installé un thème sombre et pour avoir une visibilité optimum dans VLC, j'ai téléchargé une apparence adaptée que j'ai logiquement enregistré sous /home/laurent/.local/share/vlc. Mais, via l'interface VLC, je n'ai pas trouvé comment accéder à un dossier caché !?
Quelqu'un a t-il une idée pour configurer cela ?

Dernière modification par lool_lauris (Le 28/01/2019, à 18:06)


Soutenez le Libre => http://www.april.org/

Hors ligne

#2 Le 28/01/2019, à 10:25

TheSun

Re : Accéder aux dossiers cachés via VLC [RÉSOLU]

CTRL + H dans le gestionnaire de fichier pour afficher le contenu caché.

Hors ligne

#3 Le 28/01/2019, à 10:57

moko138

Re : Accéder aux dossiers cachés via VLC [RÉSOLU]

.     "j'ai installé un thème sombre"
  Sauf rectification de ta part, je supposerai que tu parles d'un thème commun à toute ta session.
  - -

     "j'ai téléchargé une apparence adaptée" [à vlc] :
c'est la première fois que j'entends parler de "télécharger une apparence".
Sur quel site l'as-tu fait ?
Ce site ne donne-t-il pas le mode d'emploi ?
  - -

     "que j'ai logiquement enregistré sous /home/laurent/.local/share/vlc" :
Intuitivement, une modification de configuration, je mettrais plutôt ça dans
~/.config/vlc/, après avoir fermé toutes les fenêtres de vlc, et avant de rouvrir vlc.

D'ailleurs je t'invite à regarder
~/.config/vlc/*.conf
et en particulier

grep "Style=" ~/.config/vlc/*.conf

  - -

Si ça ne suffit pas, regarde ~/.config/vlc/vlcrc
(son contenu, malheureusement, n'est pas intuitif).
  - -

En dernier recours, que proposent l'aide de vlc, et enfin https://wiki.videolan.org/Knowledge_Base ?

= =

TheSun : merci de lire la question avant d'y répondre.  smile


%NOINDEX%
Un utilitaire méconnu : ncdu

En ligne

#4 Le 28/01/2019, à 11:14

lool_lauris

Re : Accéder aux dossiers cachés via VLC [RÉSOLU]

Je sais afficher les fichiers cachés dans le gestionnaires de fichiers, d'ailleurs ils le sont déjà par défaut dans mon système. Le problème se situe dans VLC qui ne les affichent pas.

Voici ce que l'on voit au travers VLC :
2019-01-28-11-07-35-771351-nav-vlc.png

Voici ce que l'on voit au travers Nautilus :
2019-01-28-11-12-50-320643-nav-nautilus.png


Soutenez le Libre => http://www.april.org/

Hors ligne

#5 Le 28/01/2019, à 11:30

lool_lauris

Re : Accéder aux dossiers cachés via VLC [RÉSOLU]

moko138 a écrit :

  Sauf rectification de ta part, je supposerai que tu parles d'un thème commun à toute ta session.

Oui, c'est bien un thème pour l'ensemble de la session (Arc-Dark).


moko138 a écrit :

c'est la première fois que j'entends parler de "télécharger une apparence".
Sur quel site l'as-tu fait ?
Ce site ne donne-t-il pas le mode d'emploi ?

C'est le site de VLC (chez eux ils appellent l'apparence : "skin"... effectivement, plutôt "qu'apparence", j'aurai pu dire "peau") . smile
=> http://www.videolan.org/vlc/skins.php


Voici le contenu de vlc-qt-interface.conf

[General]
filedialog-path=/home/laurent/Vid\xe9os/dwhelper/clips
geometry="@ByteArray(\x1\xd9\xd0\xcb\0\x2\0\0\0\0\0\x31\0\0\0\x18\0\0\a\x7f\0\0\x4\x37\0\0\0\x31\0\0\0,\0\0\a\x7f\0\0\x4K\0\0\0\0\x2\0\0\0\a\x80)"

[FullScreen]
pos=@Point(560 1016)
screen=@Rect(0 0 1920 1080)
wide=false

[MainWindow]
AdvToolbar="12;11;13;14;"
FSCtoolbar="0-2;64;3;1;4;64;37;64;38;64;8;65;25;35-4;34;"
InputToolbar="43;33-4;44;"
MainToolbar1="64;39;64;38;65;"
MainToolbar2="0-2;64;3;1;4;64;7;9;64;10;20;19;64-4;37;65;35-4;"
QtStyle=Valeur par d\xe9\x66\x61ut du syst\xe8me
ToolbarPos=false
adv-controls=0
bgSize=@Size(1871 979)
pl-dock-status=true
playlist-visible=false
playlistSize=@Size(-1 -1)
status-bar-visible=false

[OpenDialog]
advanced=false
netMRL=
size=@Size(639 408)

[Preferences]
geometry=@ByteArray(\x1\xd9\xd0\xcb\0\x2\0\0\0\0\x2H\0\0\0\xca\0\0\a~\0\0\x3\xa3\0\0\x2J\0\0\0\xe6\0\0\a|\0\0\x3\xa1\0\0\0\0\0\0\0\0\a\x80)

[RecentsMRL]
list=file:///home/laurent/.www-dev/private/lsv_ng/scripts/shadowbox/expressInstall.swf, dvd:///dev/sr0, dvd:///dev/dvd, vcd:///dev/sr0, file:///home/laurent/Bureau/video_puget/in%20the%20summertime.mp3, file:///home/laurent/Vid%C3%A9os/dwhelper/clips/Mungo%20Jerry%20-%20In%20The%20Summertime%20ORIGINAL%201970%20-%20YouTube.webm, file:///home/laurent/Bureau/Vid%C3%A9os%20Emilien%20Planneur%20%282%29/2018-08-03_CD_vinon_puget.mp4, file:///home/laurent/Bureau/Vid%C3%A9os%20Emilien%20Planneur%20%282%29/emilien3.mp4, file:///home/laurent/Bureau/Vid%C3%A9os%20Emilien%20Planneur%20%282%29/emilien1.mp4, file:///home/laurent/Bureau/Vid%C3%A9os%20Emilien%20Planneur%20%282%29/emilien2.mp4, file:///home/laurent/Vid%C3%A9os/dwhelper/clips/c2c-down-the-road_music.mp4, file:///home/laurent/Vid%C3%A9os/dwhelper/clips/Canned%20Heat%20Boogie%20Woodstock.mp4, file:///home/laurent/Vid%C3%A9os/dwhelper/clips/Arlo_Guthrie_-_Coming_Into_Los_Angeles_live_1969_HD_0815007.mp4, file:///home/laurent/Vid%C3%A9os/dwhelper/clips/Bobby%20Hebb%20-%20Sunny%20-%20YouTube.webm, file:///home/laurent/Vid%C3%A9os/dwhelper/clips/ACDC%20-%20Highway%20to%20Hell%20-%20YouTube.mp4, file:///home/laurent/Vid%C3%A9os/dwhelper/clips/CANNED%20HEAT%20-%20LET%27S%20WORK%20TOGETHER.mp4, file:///home/laurent/Bureau/video_puget/puget_2018.mp4, file:///home/laurent/Bureau/video_puget/puget_2018_1.mp4, file:///home/laurent/Musique/Chicago/Chicago%20II/04%20-%20In%20The%20Country.ogg, file:///home/laurent/Bureau/Vid%C3%A9os%20Emilien%20Planneur%20%282%29/emilien4.mp4, file:///home/laurent/Bureau/Vid%C3%A9os%20Emilien%20Planneur%20%282%29/GOPR0325.MP4, file:///home/laurent/Bureau/Vid%C3%A9os%20Emilien%20Planneur%20%282%29/GOPR0324.MP4, file:///home/laurent/Bureau/Vid%C3%A9os%20Emilien%20Planneur%20%282%29/GOPR0323.MP4, file:///home/laurent/Bureau/Vid%C3%A9os%20Emilien%20Planneur%20%282%29/GOPR0322.MP4, file:///home/laurent/Bureau/Vid%C3%A9os%20Emilien%20Planneur%20%282%29/GOPR0321.MP4, file:///home/laurent/Bureau/Vid%C3%A9os%20Emilien%20Planneur%20%282%29/GOPR0320.MP4, file:///home/laurent/Bureau/Vid%C3%A9os%20Emilien%20Planneur%20%282%29/GOPR0319.MP4, file:///home/laurent/Bureau/Vid%C3%A9os%20Emilien%20Planneur%20%282%29/GOPR0318.MP4, file:///home/laurent/Bureau/Vid%C3%A9os%20Emilien%20Planneur%20%282%29/GOPR0315.MP4, https://www.france.tv/france-2/direct.html
times=0, 0, 0, 0, 0, 0, 0, 0, 7987, 0, 0, 29338, 28601, 8831, 15664, 82600, 29000, 0, 0, 23991, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

[ToolbarProfiles]
1\ProfileName=VLC 2.x.x Style
1\Value="0|64;39;64;38;65;|0-2;64;3;1;4;64;7;9;64;10;20;19;64-4;37;65;35-4;|12;11;13;14;|43;33-4;44;|0-2;64;3;1;4;64;37;64;38;64;8;65;25;35-4;34;"
2\ProfileName=VLC 1.1.x Style
2\Value="0|64;39;64;38;65;|0-2;64;3;1;4;64;7;10;9;64-4;20;19;64-4;37;65;35-4;|12;11;13;14;|5-1;33;6-1;|0-2;64;3;1;4;64;37;64;38;64;8;65;25;35-4;34;"
3\ProfileName=VLC 0.8.x Style
3\Value="1|64;39-1;64;38;|2-1;32-4;0-5;1-5;32-5;3-5;5-5;6-5;4-5;32-5;10-1;64-1;35-1;65;|12-1;11-1;13-1;14-1;|33;37-4;|0-5;1-5;32-1;1-5;5-1;6-1;4-5;32-1;12-5;11-1;65;34-4;35-1;"
4\ProfileName=Minimalist Style
4\Value="0|64;65;|0-7;64;3-1;1-5;4-1;64;12-5;64-5;37-5;38-5;64-4;10-1;65;36-4;|11-5;13-5;14-5;|5-1;33;6-1;|0-5;64;3-5;1-5;4-5;64;12-5;65;34-4;35-1;"
5\ProfileName=One-Liner Style
5\Value="0|64;38;65;|0-4;64;3;1;4;64;7;10;9;64-4;39;64-4;37;65;36-4;|12;11;14;13;|5-1;33;6-1;|0-2;64;3;1;4;64;37;64;38;64;8;65;25;35-4;34;"
6\ProfileName=Simplest Style
6\Value="0||36-4;65-4;0-7;4-5;1-5;65-4;7-5;|12-4;11;13;||36-4;65-4;0-5;4-5;1-5;65;8-5;"
size=6

Et vlcrc

###
###  vlc 2.2.2
###

###
### lines beginning with a '#' character are comments
###

[twolame] # Libtwolame audio encoder

# Encoding quality (float)
#sout-twolame-quality=0.000000

# Stereo mode (integer)
#sout-twolame-mode=0

# VBR mode (boolean)
#sout-twolame-vbr=0

# Psycho-acoustic model (integer)
#sout-twolame-psy=3

[subsdec] # Text subtitle decoder

# Subtitle justification (integer)
#subsdec-align=0

# Subtitle text encoding (string)
#subsdec-encoding=

# UTF-8 subtitle autodetection (boolean)
#subsdec-autodetect-utf8=1

# Formatted Subtitles (boolean)
#subsdec-formatted=1

[schroedinger] # Dirac video decoder using libschroedinger

# Rate control method (string)
#sout-schro-rate-control=

# Constant quality factor (float)
#sout-schro-quality=-1.000000

# Noise Threshold (float)
#sout-schro-noise-threshold=-1.000000

# CBR bitrate (kbps) (integer)
#sout-schro-bitrate=-1

# Maximum bitrate (kbps) (integer)
#sout-schro-max-bitrate=-1

# Minimum bitrate (kbps) (integer)
#sout-schro-min-bitrate=-1

# GOP structure (string)
#sout-schro-gop-structure=

# GOP length (integer)
#sout-schro-gop-length=-1

# Chroma format (string)
#sout-schro-chroma-fmt=420

# Picture coding mode (string)
#sout-schro-coding-mode=auto

# Motion Vector precision (string)
#sout-schro-mv-precision=

# Size of motion compensation blocks (string)
#sout-schro-motion-block-size=

# Overlap of motion compensation blocks (string)
#sout-schro-motion-block-overlap=

# Three component motion estimation (integer)
#sout-schro-me-combined=-1

# Enable hierarchical Motion Estimation (integer)
#sout-schro-enable-hierarchical-me=-1

# Number of levels of downsampling (integer)
#sout-schro-downsample-levels=-1

# Enable Global Motion Estimation (integer)
#sout-schro-enable-global-me=-1

# Enable Phase Correlation Estimation (integer)
#sout-schro-enable-phasecorr-me=-1

# Intra picture DWT filter (string)
#sout-schro-intra-wavelet=

# Inter picture DWT filter (string)
#sout-schro-inter-wavelet=

# Number of DWT iterations (integer)
#sout-schro-transform-depth=-1

# Enable multiple quantizers (integer)
#sout-schro-enable-multiquant=-1

# Size of code blocks in each subband (string)
#sout-schro-codeblock-size=

# Prefilter (string)
#sout-schro-filtering=

# Amount of prefiltering (float)
#sout-schro-filter-value=-1.000000

# Enable Scene Change Detection (integer)
#sout-schro-enable-scd=-1

# perceptual weighting method (string)
#sout-schro-perceptual-weighting=

# perceptual distance (float)
#sout-schro-perceptual-distance=-1.000000

# Disable arithmetic coding (integer)
#sout-schro-enable-noarith=-1

# Horizontal slices per frame (integer)
#sout-schro-horiz-slices=-1

# Vertical slices per frame (integer)
#sout-schro-vert-slices=-1

# Force Profile (string)
#sout-schro-force-profile=

[svcdsub] # Philips OGT (SVCD subtitle) decoder

[svgdec] # SVG video decoder

# Image width (integer)
#svg-width=-1

# Image height (integer)
#svg-height=-1

# Scale factor (float)
#svg-scale=-1.000000

[avcodec] # FFmpeg audio/video decoder

# Direct rendering (boolean)
#avcodec-dr=1

# Error resilience (integer)
#avcodec-error-resilience=1

# Workaround bugs (integer)
#avcodec-workaround-bugs=1

# Hurry up (boolean)
#avcodec-hurry-up=1

# Skip frame (default=0) (integer)
#avcodec-skip-frame=0

# Skip idct (default=0) (integer)
#avcodec-skip-idct=0

# Visualize motion vectors (integer)
#avcodec-vismv=0

# Allow speed tricks (boolean)
#avcodec-fast=0

# Skip the loop filter for H.264 decoding (integer)
#avcodec-skiploopfilter=0

# Debug mask (integer)
#avcodec-debug=0

# Codec name (string)
#avcodec-codec=

# Hardware decoding (string)
avcodec-hw=vdpau_avcodec

# Threads (integer)
#avcodec-threads=0

# Advanced options (string)
#avcodec-options=

# Codec name (string)
#sout-avcodec-codec=

# Quality level (string)
#sout-avcodec-hq=rd

# Ratio of key frames (integer)
#sout-avcodec-keyint=0

# Ratio of B frames (integer)
#sout-avcodec-bframes=0

# Hurry up (boolean)
#sout-avcodec-hurry-up=0

# Interlaced encoding (boolean)
#sout-avcodec-interlace=0

# Interlaced motion estimation (boolean)
#sout-avcodec-interlace-me=1

# Video bitrate tolerance (integer)
#sout-avcodec-vt=0

# Pre-motion estimation (boolean)
#sout-avcodec-pre-me=0

# Rate control buffer size (integer)
#sout-avcodec-rc-buffer-size=0

# Rate control buffer aggressiveness (float)
#sout-avcodec-rc-buffer-aggressivity=1.000000

# I quantization factor (float)
#sout-avcodec-i-quant-factor=0.000000

# Noise reduction (integer)
#sout-avcodec-noise-reduction=0

# MPEG4 quantization matrix (boolean)
#sout-avcodec-mpeg4-matrix=0

# Minimum video quantizer scale (integer)
#sout-avcodec-qmin=0

# Maximum video quantizer scale (integer)
#sout-avcodec-qmax=0

# Trellis quantization (boolean)
#sout-avcodec-trellis=0

# Fixed quantizer scale (float)
#sout-avcodec-qscale=3.000000

# Strict standard compliance (integer)
#sout-avcodec-strict=0

# Luminance masking (float)
#sout-avcodec-lumi-masking=0.000000

# Darkness masking (float)
#sout-avcodec-dark-masking=0.000000

# Motion masking (float)
#sout-avcodec-p-masking=0.000000

# Border masking (float)
#sout-avcodec-border-masking=0.000000

# Luminance elimination (integer)
#sout-avcodec-luma-elim-threshold=0

# Chrominance elimination (integer)
#sout-avcodec-chroma-elim-threshold=0

# Specify AAC audio profile to use (string)
#sout-avcodec-aac-profile=low

# Advanced options (string)
#sout-avcodec-options=

[dvbsub] # DVB subtitles decoder

# Subpicture position (integer)
#dvbsub-position=8

# Decoding X coordinate (integer)
#dvbsub-x=-1

# Decoding Y coordinate (integer)
#dvbsub-y=-1

# Encoding X coordinate (integer)
#sout-dvbsub-x=-1

# Encoding Y coordinate (integer)
#sout-dvbsub-y=-1

[spudec] # DVD subtitles decoder

# Disable DVD subtitle transparency (boolean)
#dvdsub-transparency=0

[jpeg] # JPEG image decoder

# Quality level (integer)
#sout-jpeg-quality=95

[kate] # Kate overlay decoder

# Formatted Subtitles (boolean)
#kate-formatted=1

[vorbis] # Vorbis audio decoder

# Encoding quality (integer)
#sout-vorbis-quality=0

# Maximum encoding bitrate (integer)
#sout-vorbis-max-bitrate=0

# Minimum encoding bitrate (integer)
#sout-vorbis-min-bitrate=0

# CBR encoding (boolean)
#sout-vorbis-cbr=0

[x264] # H.264/MPEG-4 Part 10/AVC encoder (x264)

# Maximum GOP size (integer)
#sout-x264-keyint=250

# Minimum GOP size (integer)
#sout-x264-min-keyint=25

# Use recovery points to close GOPs (boolean)
#sout-x264-opengop=0

# Enable compatibility hacks for Blu-ray support (boolean)
#sout-x264-bluray-compat=0

# Extra I-frames aggressivity (integer)
#sout-x264-scenecut=40

# B-frames between I and P (integer)
#sout-x264-bframes=3

# Adaptive B-frame decision (integer)
#sout-x264-b-adapt=1

# Influence (bias) B-frames usage (integer)
#sout-x264-b-bias=0

# Keep some B-frames as references (string)
#sout-x264-bpyramid=normal

# CABAC (boolean)
#sout-x264-cabac=1

# Use fullrange instead of TV colorrange (boolean)
#sout-x264-fullrange=0

# Number of reference frames (integer)
#sout-x264-ref=3

# Skip loop filter (boolean)
#sout-x264-nf=0

# Loop filter AlphaC0 and Beta parameters alpha:beta (string)
#sout-x264-deblock=0:0

# Strength of psychovisual optimization, default is "1.0:0.0" (string)
#sout-x264-psy-rd=1.0:0.0

# Use Psy-optimizations (boolean)
#sout-x264-psy=1

# H.264 level (string)
#sout-x264-level=0

# H.264 profile (string)
#sout-x264-profile=high

# Interlaced mode (boolean)
#sout-x264-interlaced=0

# Frame packing (integer)
#sout-x264-frame-packing=-1

# Force number of slices per frame (integer)
#sout-x264-slices=0

# Limit the size of each slice in bytes (integer)
#sout-x264-slice-max-size=0

# Limit the size of each slice in macroblocks (integer)
#sout-x264-slice-max-mbs=0

# HRD-timing information (string)
#sout-x264-hrd=none

# Set QP (integer)
#sout-x264-qp=-1

# Quality-based VBR (integer)
#sout-x264-crf=23

# Min QP (integer)
#sout-x264-qpmin=10

# Max QP (integer)
#sout-x264-qpmax=51

# Max QP step (integer)
#sout-x264-qpstep=4

# Average bitrate tolerance (float)
#sout-x264-ratetol=1.000000

# Max local bitrate (integer)
#sout-x264-vbv-maxrate=0

# VBV buffer (integer)
#sout-x264-vbv-bufsize=0

# Initial VBV buffer occupancy (float)
#sout-x264-vbv-init=0.900000

# QP factor between I and P (float)
#sout-x264-ipratio=1.400000

# QP factor between P and B (float)
#sout-x264-pbratio=1.300000

# QP difference between chroma and luma (integer)
#sout-x264-chroma-qp-offset=0

# Multipass ratecontrol (integer)
#sout-x264-pass=0

# QP curve compression (float)
#sout-x264-qcomp=0.600000

# Reduce fluctuations in QP (float)
#sout-x264-cplxblur=20.000000

# Reduce fluctuations in QP (float)
#sout-x264-qblur=0.500000

# How AQ distributes bits (integer)
#sout-x264-aq-mode=1

# Strength of AQ (float)
#sout-x264-aq-strength=1.000000

# Partitions to consider (string)
#sout-x264-partitions=normal

# Direct MV prediction mode (string)
#sout-x264-direct=spatial

# Direct prediction size (integer)
#sout-x264-direct-8x8=1

# Weighted prediction for B-frames (boolean)
#sout-x264-weightb=1

# Weighted prediction for P-frames (integer)
#sout-x264-weightp=2

# Integer pixel motion estimation method (string)
#sout-x264-me=hex

# Maximum motion vector search range (integer)
#sout-x264-merange=16

# Maximum motion vector length (integer)
#sout-x264-mvrange=-1

# Minimum buffer space between threads (integer)
#sout-x264-mvrange-thread=-1

# Subpixel motion estimation and partition decision quality (integer)
#sout-x264-subme=7

# Decide references on a per partition basis (boolean)
#sout-x264-mixed-refs=1

# Chroma in motion estimation (boolean)
#sout-x264-chroma-me=1

# Adaptive spatial transform size (boolean)
#sout-x264-8x8dct=1

# Trellis RD quantization (integer)
#sout-x264-trellis=1

# Framecount to use on frametype lookahead (integer)
#sout-x264-lookahead=40

# Use Periodic Intra Refresh (boolean)
#sout-x264-intra-refresh=0

# Use mb-tree ratecontrol (boolean)
#sout-x264-mbtree=1

# Early SKIP detection on P-frames (boolean)
#sout-x264-fast-pskip=1

# Coefficient thresholding on P-frames (boolean)
#sout-x264-dct-decimate=1

# Noise reduction (integer)
#sout-x264-nr=0

# Inter luma quantization deadzone (integer)
#sout-x264-deadzone-inter=21

# Intra luma quantization deadzone (integer)
#sout-x264-deadzone-intra=11

# Non-deterministic optimizations when threaded (boolean)
#sout-x264-non-deterministic=0

# CPU optimizations (boolean)
#sout-x264-asm=1

# PSNR computation (boolean)
#sout-x264-psnr=0

# SSIM computation (boolean)
#sout-x264-ssim=0

# Quiet mode (boolean)
#sout-x264-quiet=0

# SPS and PPS id numbers (integer)
#sout-x264-sps-id=0

# Access unit delimiters (boolean)
#sout-x264-aud=0

# Statistics (boolean)
#sout-x264-verbose=0

# Filename for 2 pass stats file (string)
#sout-x264-stats=x264_2pass.log

# Default preset setting used (string)
sout-x264-preset=ultrafast

# Default tune setting used (string)
sout-x264-tune=film

# x264 advanced options. (string)
#sout-x264-options=

[theora] # Theora video decoder

# Post processing quality (integer)
#theora-postproc=-1

# Encoding quality (integer)
#sout-theora-quality=2

[speex] # Speex audio decoder

# Mode (integer)
#sout-speex-mode=0

# Encoding complexity (integer)
#sout-speex-complexity=3

# CBR encoding (boolean)
#sout-speex-cbr=0

# Encoding quality (float)
#sout-speex-quality=8.000000

# Maximal bitrate (integer)
#sout-speex-max-bitrate=0

# Voice activity detection (boolean)
#sout-speex-vad=1

# Discontinuous Transmission (boolean)
#sout-speex-dtx=0

[ddummy] # Dummy decoder

# Save raw codec data (boolean)
#dummy-save-es=0

[sftp] # SFTP input

# Read size (integer)
#sftp-readsize=8192

# SFTP port (integer)
#sftp-port=22

[access_mms] # Microsoft Media Server (MMS) input

# TCP/UDP timeout (ms) (integer)
#mms-timeout=5000

# Force selection of all streams (boolean)
#mms-all=0

# Maximum bitrate (integer)
#mms-maxbitrate=0

# HTTP proxy (string)
#mmsh-proxy=

[cdda] # Audio CD input

# CDDB Server (string)
#cddb-server=freedb.videolan.org

# CDDB port (integer)
#cddb-port=80

[xcb_screen] # Screen capture (with X11/XCB)

# Frame rate (float)
#screen-fps=2.000000

# Region left column (integer)
#screen-left=0

# Region top row (integer)
#screen-top=0

# Capture region width (integer)
#screen-width=0

# Capture region height (integer)
#screen-height=0

# Follow the mouse (boolean)
#screen-follow-mouse=0

[dtv] # Digital Television and Radio

# DVB adapter (integer)
#dvb-adapter=0

# DVB device (integer)
#dvb-device=0

# Do not demultiplex (boolean)
#dvb-budget-mode=0

# Frequency (Hz) (integer)
#dvb-frequency=0

# Spectrum inversion (integer)
#dvb-inversion=-1

# Bandwidth (MHz) (integer)
#dvb-bandwidth=0

# Transmission mode (integer)
#dvb-transmission=0

# Guard interval (string)
#dvb-guard=

# High-priority code rate (string)
#dvb-code-rate-hp=

# Low-priority code rate (string)
#dvb-code-rate-lp=

# Hierarchy mode (integer)
#dvb-hierarchy=-1

# DVB-T2 Physical Layer Pipe (integer)
#dvb-plp-id=0

# Layer A modulation (string)
#dvb-a-modulation=

# Layer A code rate (string)
#dvb-a-fec=

# Layer A segments count (integer)
#dvb-a-count=0

# Layer A time interleaving (integer)
#dvb-a-interleaving=0

# Layer B modulation (string)
#dvb-b-modulation=

# Layer B code rate (string)
#dvb-b-fec=

# Layer B segments count (integer)
#dvb-b-count=0

# Layer B time interleaving (integer)
#dvb-b-interleaving=0

# Layer C modulation (string)
#dvb-c-modulation=

# Layer C code rate (string)
#dvb-c-fec=

# Layer C segments count (integer)
#dvb-c-count=0

# Layer C time interleaving (integer)
#dvb-c-interleaving=0

# Modulation / Constellation (string)
#dvb-modulation=

# Symbol rate (bauds) (integer)
#dvb-srate=0

# FEC code rate (string)
#dvb-fec=

# Stream identifier (integer)
#dvb-stream=0

# Pilot (integer)
#dvb-pilot=-1

# Roll-off factor (integer)
#dvb-rolloff=-1

# Transport stream ID (integer)
#dvb-ts-id=0

# Polarization (Voltage) (string)
#dvb-polarization=

# ? (integer)
#dvb-voltage=13

# High LNB voltage (boolean)
#dvb-high-voltage=0

# Local oscillator low frequency (kHz) (integer)
#dvb-lnb-low=0

# Local oscillator high frequency (kHz) (integer)
#dvb-lnb-high=0

# Universal LNB switch frequency (kHz) (integer)
#dvb-lnb-switch=11700000

# DiSEqC LNB number (integer)
#dvb-satno=0

# Uncommitted DiSEqC LNB number (integer)
#dvb-uncommitted=0

# Continuous 22kHz tone (integer)
#dvb-tone=-1

[rdp] # RDP Remote Desktop

# RDP auth username (string)
#rdp-user=

# RDP auth password (string)
#rdp-password=

# Frame rate (float)
#rdp-fps=5.000000

# Encrypted connexion (boolean)
#rdp-encrypt=0

[filesystem] # File input

# Subdirectory behavior (string)
#recursive=expand

# Ignored extensions (string)
#ignore-filetypes=m3u,db,nfo,ini,jpg,jpeg,ljpg,gif,png,pgm,pgmyuv,pbm,pam,tga,bmp,pnm,xpm,xcf,pcx,tif,tiff,lbm,sfv,txt,sub,idx,srt,cue,ssa

# Directory sort order (string)
#directory-sort=collate

[udp] # UDP input

# Receive buffer (integer)
#udp-buffer=4194304

[avio] # libavformat AVIO access

# Advanced options (string)
#avio-options=

# Advanced options (string)
#sout-avio-options=

[live555] # RTP/RTSP/SDP demuxer (using Live555)

# Use RTP over RTSP (TCP) (boolean)
#rtsp-tcp=0

# Client port (integer)
#rtp-client-port=-1

# Force multicast RTP via RTSP (boolean)
#rtsp-mcast=0

# Tunnel RTSP and RTP over HTTP (boolean)
#rtsp-http=0

# HTTP tunnel port (integer)
#rtsp-http-port=80

# Kasenna RTSP dialect (boolean)
#rtsp-kasenna=0

# WMServer RTSP dialect (boolean)
#rtsp-wmserver=0

# RTSP user name (string)
#rtsp-user=

# RTSP password (string)
#rtsp-pwd=

# RTSP frame buffer size (integer)
#rtsp-frame-buffer-size=100000

[dvb] # DVB input with v4l2 support

# Probe DVB card for capabilities (boolean)
#dvb-probe=1

# Satellite scanning config (string)
#dvb-satellite=

[ftp] # FTP input

# FTP user name (string)
#ftp-user=anonymous

# FTP password (string)
#ftp-pwd=anonymous@example.com

# FTP account (string)
#ftp-account=anonymous

[v4l2] # Video4Linux input

# Video capture device (string)
#v4l2-dev=/dev/video0

# VBI capture device (string)
#v4l2-vbidev=

# Standard (string)
#v4l2-standard=

# Video input chroma format (string)
#v4l2-chroma=

# Input (integer)
#v4l2-input=0

# Audio input (integer)
#v4l2-audio-input=-1

# Width (integer)
#v4l2-width=0

# Height (integer)
#v4l2-height=0

# Picture aspect-ratio n:m (string)
#v4l2-aspect-ratio=4:3

# Frame rate (string)
#v4l2-fps=60

# Radio device (string)
#v4l2-radio-dev=/dev/radio0

# Frequency (integer)
#v4l2-tuner-frequency=-1

# Audio mode (integer)
#v4l2-tuner-audio-mode=3

# Reset controls (boolean)
#v4l2-controls-reset=0

# Brightness (integer)
#v4l2-brightness=-1

# Automatic brightness (integer)
#v4l2-brightness-auto=-1

# Contrast (integer)
#v4l2-contrast=-1

# Saturation (integer)
#v4l2-saturation=-1

# Hue (integer)
#v4l2-hue=-1

# Automatic hue (integer)
#v4l2-hue-auto=-1

# White balance temperature (K) (integer)
#v4l2-white-balance-temperature=-1

# Automatic white balance (integer)
#v4l2-auto-white-balance=-1

# Red balance (integer)
#v4l2-red-balance=-1

# Blue balance (integer)
#v4l2-blue-balance=-1

# Gamma (integer)
#v4l2-gamma=-1

# Automatic gain (integer)
#v4l2-autogain=-1

# Gain (integer)
#v4l2-gain=-1

# Sharpness (integer)
#v4l2-sharpness=-1

# Chroma gain (integer)
#v4l2-chroma-gain=-1

# Automatic chroma gain (integer)
#v4l2-chroma-gain-auto=-1

# Power line frequency (integer)
#v4l2-power-line-frequency=-1

# Backlight compensation (integer)
#v4l2-backlight-compensation=-1

# Band-stop filter (integer)
#v4l2-band-stop-filter=-1

# Horizontal flip (boolean)
#v4l2-hflip=0

# Vertical flip (boolean)
#v4l2-vflip=0

# Rotate (degrees) (integer)
#v4l2-rotate=-1

# Color killer (integer)
#v4l2-color-killer=-1

# Color effect (integer)
#v4l2-color-effect=-1

# Audio volume (integer)
#v4l2-audio-volume=-1

# Audio balance (integer)
#v4l2-audio-balance=-1

# Mute (boolean)
#v4l2-audio-mute=0

# Bass level (integer)
#v4l2-audio-bass=-1

# Treble level (integer)
#v4l2-audio-treble=-1

# Loudness mode (boolean)
#v4l2-audio-loudness=0

# v4l2 driver controls (string)
#v4l2-set-ctrls=

[shm] # Shared memory framebuffer

# Frame rate (float)
#shm-fps=10.000000

# Frame buffer depth (integer)
#shm-depth=0

# Frame buffer width (integer)
#shm-width=800

# Frame buffer height (integer)
#shm-height=480

[smb] # SMB input

# SMB user name (string)
#smb-user=

# SMB password (string)
#smb-pwd=

# SMB domain (string)
#smb-domain=

[dvdnav] # DVDnav Input

# DVD angle (integer)
#dvdnav-angle=1

# Start directly in menu (boolean)
#dvdnav-menu=1

[rtp] # Real-Time Protocol (RTP) input

# RTCP (local) port (integer)
#rtcp-port=0

# SRTP key (hexadecimal) (string)
#srtp-key=

# SRTP salt (hexadecimal) (string)
#srtp-salt=

# Maximum RTP sources (integer)
#rtp-max-src=1

# RTP source timeout (sec) (integer)
#rtp-timeout=5

# Maximum RTP sequence number dropout (integer)
#rtp-max-dropout=3000

# Maximum RTP sequence number misordering (integer)
#rtp-max-misorder=100

# RTP payload format assumed for dynamic payloads (string)
#rtp-dynamic-pt=

[http] # HTTP input

# HTTP proxy (string)
#http-proxy=

# HTTP proxy password (string)
#http-proxy-pwd=

# HTTP referer value (string)
#http-referrer=

# User Agent (string)
#http-user-agent=

# Auto re-connect (boolean)
#http-reconnect=0

# Continuous stream (boolean)
#http-continuous=0

# Forward Cookies (boolean)
#http-forward-cookies=1

[vcdx] # Video CD (VCD 1.0, 1.1, 2.0, SVCD, HQVCD) input

# If nonzero, this gives additional debug information. (integer)
#vcdx-debug=0

# Number of CD blocks to get in a single read. (integer)
#vcdx-blocks-per-read=20

# Use playback control? (boolean)
#vcdx-PBC=0

# Use track length as maximum unit in seek? (boolean)
#vcdx-track-length=1

# Show extended VCD info? (boolean)
#vcdx-extended-info=0

# Format to use in the playlist's "author" field. (string)
#vcdx-author-format=%v - %F disc %c of %C

# Format to use in the playlist's "title" field. (string)
#vcdx-title-format=%I %N %L%S - %M %A %v - disc %c of %C %F

[timecode] # Time code subpicture elementary stream generator

# Frame rate (string)
#timecode-fps=25/1

[vdr] # VDR recordings

# Chapter offset in ms (integer)
#vdr-chapter-offset=0

# Frame rate (float)
#vdr-fps=25.000000

[libbluray] # Blu-ray Disc support (libbluray)

# Blu-ray menus (boolean)
#bluray-menu=0

# Region code (string)
#bluray-region=B

[access_alsa] # ALSA audio capture

# Stereo (boolean)
#alsa-stereo=1

# Sample rate (integer)
#alsa-samplerate=48000

[vnc] # VNC client access

# Username (string)
#rfb-user=

# Password (string)
#rfb-password=

# X.509 Certificate Authority (string)
#rfb-x509-ca=

# X.509 Certificate Revocation List (string)
#rfb-x509-crl=

# X.509 Client certificate (string)
#rfb-x509-client-cert=

# X.509 Client private key (string)
#rfb-x509-client-key=

# Frame rate (float)
#rfb-fps=5.000000

# Frame buffer depth (string)
#rfb-chroma=RV32

# Compression level (integer)
#rfb-compress-level=0

# Image quality (integer)
#rfb-quality-level=9

[linsys_hdsdi] # HD-SDI Input

# Link # (integer)
#linsys-hdsdi-link=0

# Video ID (integer)
#linsys-hdsdi-id-video=0

# Aspect ratio (string)
#linsys-hdsdi-aspect-ratio=

# Audio configuration (string)
#linsys-hdsdi-audio=0=1,1

[imem] # Memory input

# ID (integer)
#imem-id=-1

# Group (integer)
#imem-group=0

# Category (integer)
#imem-cat=0

# Codec (string)
#imem-codec=

# Language (string)
#imem-language=

# Sample rate (integer)
#imem-samplerate=0

# Channels count (integer)
#imem-channels=0

# Width (integer)
#imem-width=0

# Height (integer)
#imem-height=0

# Display aspect ratio (string)
#imem-dar=

# Frame rate (string)
#imem-fps=

# Size (integer)
#imem-size=0

[linsys_sdi] # SDI Input

# Link # (integer)
#linsys-sdi-link=0

# Video ID (integer)
#linsys-sdi-id-video=0

# Aspect ratio (string)
#linsys-sdi-aspect-ratio=

# Audio configuration (string)
#linsys-sdi-audio=0=1,1

# Teletext configuration (string)
#linsys-sdi-telx=

# Teletext language (string)
#linsys-sdi-telx-lang=

[dvdread] # DVDRead Input (no menu support)

# DVD angle (integer)
#dvdread-angle=1

[vdpau_chroma] # VDPAU surface conversions

# Deinterlace (integer)
#vdpau-deinterlace=1

# Inverse telecine (boolean)
#vdpau-ivtc=0

# Deinterlace chroma skip (boolean)
#vdpau-chroma-skip=0

# Noise reduction level (float)
#vdpau-noise-reduction=0.000000

# Scaling quality (integer)
#vdpau-scaling=0

[packetizer_mpegvideo] # MPEG-I/II video packetizer

# Sync on Intra Frame (boolean)
#packetizer-mpegvideo-sync-iframe=0

[skins2] # Skinnable Interface

# Skin to use (string)
#skins2-last=

# Config of last used skin (string)
#skins2-config=

# Enable transparency effects (boolean)
#skins2-transparency=0

# Use a skinned playlist (boolean)
#skinned-playlist=1

# Display video in a skinned window if any (boolean)
#skinned-video=1

[ncurses] # Ncurses interface

# Filebrowser starting point (string)
#browse-dir=

[qt4] # Qt interface

# Start in minimal view (without menus) (boolean)
#qt-minimal-view=0

# Systray icon (boolean)
#qt-system-tray=1

# Show notification popup on track change (integer)
#qt-notification=1

# Start VLC with only a systray icon (boolean)
#qt-start-minimized=0

# Pause the video playback when minimized (boolean)
#qt-pause-minimized=0

# Windows opacity between 0.1 and 1 (float)
#qt-opacity=1.000000

# Fullscreen controller opacity between 0.1 and 1 (float)
#qt-fs-opacity=0.800000

# Resize interface to the native video size (boolean)
#qt-video-autoresize=1

# Show playing item name in window title (boolean)
#qt-name-in-title=1

# Show a controller in fullscreen mode (boolean)
#qt-fs-controller=1

# Save the recently played items in the menu (boolean)
#qt-recentplay=1

# List of words separated by | to filter (string)
#qt-recentplay-filter=

# Continue playback? (integer)
#qt-continue=1

# Embed the file browser in open dialog (boolean)
#qt-embedded-open=0

# Show advanced preferences over simple ones (boolean)
#qt-advanced-pref=0

# Show unimportant error and warnings dialogs (boolean)
#qt-error-dialogs=1

# Define the colors of the volume slider  (string)
#qt-slider-colours=153;210;153;20;210;20;255;199;15;245;39;29

# Ask for network policy at start (boolean)
qt-privacy-ask=0

# Define which screen fullscreen goes (integer)
#qt-fullscreen-screennumber=-1

# Load extensions on startup (boolean)
#qt-autoload-extensions=1

# Display background cone or art (boolean)
#qt-bgcone=1

# Expanding background cone or art. (boolean)
#qt-bgcone-expands=0

# Allow automatic icon changes (boolean)
#qt-icon-change=1

# Maximum Volume displayed (integer)
#qt-max-volume=125

# Fullscreen controller mouse sensitivity (integer)
#qt-fs-sensitivity=3

[stream_out_stats] # Writes statistic info about stream

# Output file (string)
#sout-stats-output=

# Prefix to show on output line (string)
#sout-stats-prefix=stats

[stream_out_mosaic_bridge] # Mosaic bridge stream output

# ID (string)
#sout-mosaic-bridge-id=Id

# Video width (integer)
#sout-mosaic-bridge-width=0

# Video height (integer)
#sout-mosaic-bridge-height=0

# Sample aspect ratio (string)
#sout-mosaic-bridge-sar=1:1

# Image chroma (string)
#sout-mosaic-bridge-chroma=

# Video filter (string)
#sout-mosaic-bridge-vfilter=

# Transparency (integer)
#sout-mosaic-bridge-alpha=255

# X offset (integer)
#sout-mosaic-bridge-x=-1

# Y offset (integer)
#sout-mosaic-bridge-y=-1

[stream_out_standard] # Standard stream output

# Output access method (string)
#sout-standard-access=

# Output muxer (string)
#sout-standard-mux=

# Output destination (string)
#sout-standard-dst=

# address to bind to (helper setting for dst) (string)
#sout-standard-bind=

# filename for stream (helper setting for dst) (string)
#sout-standard-path=

# SAP announcing (boolean)
#sout-standard-sap=0

# Session name (string)
#sout-standard-name=

# Session description (string)
#sout-standard-description=

# Session URL (string)
#sout-standard-url=

# Session email (string)
#sout-standard-email=

# Session phone number (string)
#sout-standard-phone=

[stream_out_raop] # Remote Audio Output Protocol stream output

# Host (string)
#sout-raop-host=

# Password (string)
#sout-raop-password=

# Password file (string)
#sout-raop-password-file=

# Volume (integer)
#sout-raop-volume=100

[stream_out_setid] # Change the id of an elementary stream

# Elementary Stream ID (integer)
#sout-setid-id=0

# New ES ID (integer)
#sout-setid-new-id=0

# Elementary Stream ID (integer)
#sout-setlang-id=0

# Language (string)
#sout-setlang-lang=eng

[stream_out_chromaprint] # Chromaprint stream output

# Duration of the fingerprinting (integer)
#duration=90

[stream_out_es] # Elementary stream output

# Output access method (string)
#sout-es-access=

# Output muxer (string)
#sout-es-mux=

# Output URL (string)
#sout-es-dst=

# Audio output access method (string)
#sout-es-access-audio=

# Audio output muxer (string)
#sout-es-mux-audio=

# Audio output URL (string)
#sout-es-dst-audio=

# Video output access method (string)
#sout-es-access-video=

# Video output muxer (string)
#sout-es-mux-video=

# Video output URL (string)
#sout-es-dst-video=

[stream_out_transcode] # Transcode stream output

# Video encoder (string)
sout-transcode-venc=any

# Destination video codec (string)
#sout-transcode-vcodec=

# Video bitrate (integer)
#sout-transcode-vb=0

# Video scaling (float)
#sout-transcode-scale=0.000000

# Video frame-rate (string)
#sout-transcode-fps=

# Deinterlace video (boolean)
#sout-transcode-deinterlace=0

# Deinterlace module (string)
#sout-transcode-deinterlace-module=deinterlace

# Video width (integer)
#sout-transcode-width=0

# Video height (integer)
#sout-transcode-height=0

# Maximum video width (integer)
#sout-transcode-maxwidth=0

# Maximum video height (integer)
#sout-transcode-maxheight=0

# Video filter (string)
#sout-transcode-vfilter=

# Audio encoder (string)
sout-transcode-aenc=any

# Destination audio codec (string)
#sout-transcode-acodec=

# Audio bitrate (integer)
#sout-transcode-ab=96

# Audio language (string)
#sout-transcode-alang=

# Audio channels (integer)
#sout-transcode-channels=0

# Audio sample rate (integer)
#sout-transcode-samplerate=0

# Audio filter (string)
#sout-transcode-afilter=

# Subtitle encoder (string)
sout-transcode-senc=any

# Destination subtitle codec (string)
#sout-transcode-scodec=

# Destination subtitle codec (boolean)
#sout-transcode-soverlay=0

# Overlays (string)
#sout-transcode-sfilter=

# OSD menu (boolean)
#sout-transcode-osd=0

# Number of threads (integer)
#sout-transcode-threads=0

# High priority (boolean)
#sout-transcode-high-priority=0

[stream_out_delay] # Delay a stream

# Elementary Stream ID (integer)
#sout-delay-id=0

# Delay of the ES (ms) (integer)
#sout-delay-delay=0

[stream_out_rtp] # RTP stream output

# Destination (string)
#sout-rtp-dst=

# SDP (string)
#sout-rtp-sdp=

# Muxer (string)
#sout-rtp-mux=

# SAP announcing (boolean)
#sout-rtp-sap=0

# Session name (string)
#sout-rtp-name=

# Session category (string)
#sout-rtp-cat=

# Session description (string)
#sout-rtp-description=

# Session URL (string)
#sout-rtp-url=

# Session email (string)
#sout-rtp-email=

# Session phone number (string)
#sout-rtp-phone=

# Transport protocol (string)
#sout-rtp-proto=udp

# Port (integer)
#sout-rtp-port=5004

# Audio port (integer)
#sout-rtp-port-audio=0

# Video port (integer)
#sout-rtp-port-video=0

# Hop limit (TTL) (integer)
#sout-rtp-ttl=-1

# RTP/RTCP multiplexing (boolean)
#sout-rtp-rtcp-mux=0

# Caching value (ms) (integer)
#sout-rtp-caching=300

# SRTP key (hexadecimal) (string)
#sout-rtp-key=

# SRTP salt (hexadecimal) (string)
#sout-rtp-salt=

# MP4A LATM (boolean)
#sout-rtp-mp4a-latm=0

# RTSP session timeout (s) (integer)
#rtsp-timeout=60

# Username (string)
#sout-rtsp-user=

# Password (string)
#sout-rtsp-pwd=

[stream_out_smem] # Stream output to memory buffer

# Time Synchronized output (boolean)
#sout-smem-time-sync=1

[stream_out_record] # Record stream output

# Destination prefix (string)
#sout-record-dst-prefix=

[stream_out_display] # Display stream output

# Enable audio (boolean)
#sout-display-audio=1

# Enable video (boolean)
#sout-display-video=1

# Delay (ms) (integer)
#sout-display-delay=100

[stream_out_langfromtelx] # Dynamic language setting from teletext

# Elementary Stream ID (integer)
#sout-langfromtelx-id=0

# Magazine (integer)
#sout-langfromtelx-magazine=7

# Page (integer)
#sout-langfromtelx-page=153

# Row (integer)
#sout-langfromtelx-row=1

[stream_out_bridge] # Bridge stream output

# ID (integer)
#sout-bridge-out-id=0

# Destination bridge-in name (string)
#sout-bridge-out-in-name=default

# Delay (integer)
#sout-bridge-in-delay=0

# ID Offset (integer)
#sout-bridge-in-id-offset=8192

# Name of current instance (string)
#sout-bridge-in-name=default

# Fallback to placeholder stream when out of data (boolean)
#sout-bridge-in-placeholder=0

# Placeholder delay (integer)
#sout-bridge-in-placeholder-delay=200

# Wait for I frame before toggling placeholder (boolean)
#sout-bridge-in-placeholder-switch-on-iframe=1

[panoramix] # Panoramix: wall with overlap video filter

# Number of columns (integer)
#panoramix-cols=-1

# Number of rows (integer)
#panoramix-rows=-1

# length of the overlapping area (in %) (integer)
#panoramix-bz-length=100

# height of the overlapping area (in %) (integer)
#panoramix-bz-height=100

# Attenuation (boolean)
#panoramix-attenuate=1

# Attenuation, begin (in %) (integer)
#panoramix-bz-begin=0

# Attenuation, middle (in %) (integer)
#panoramix-bz-middle=50

# Attenuation, end (in %) (integer)
#panoramix-bz-end=100

# middle position (in %) (integer)
#panoramix-bz-middle-pos=50

# Gamma (Red) correction (float)
#panoramix-bz-gamma-red=1.000000

# Gamma (Green) correction (float)
#panoramix-bz-gamma-green=1.000000

# Gamma (Blue) correction (float)
#panoramix-bz-gamma-blue=1.000000

# Black Crush for Red (integer)
#panoramix-bz-blackcrush-red=140

# Black Crush for Green (integer)
#panoramix-bz-blackcrush-green=140

# Black Crush for Blue (integer)
#panoramix-bz-blackcrush-blue=140

# White Crush for Red (integer)
#panoramix-bz-whitecrush-red=200

# White Crush for Green (integer)
#panoramix-bz-whitecrush-green=200

# White Crush for Blue (integer)
#panoramix-bz-whitecrush-blue=200

# Black Level for Red (integer)
#panoramix-bz-blacklevel-red=150

# Black Level for Green (integer)
#panoramix-bz-blacklevel-green=150

# Black Level for Blue (integer)
#panoramix-bz-blacklevel-blue=150

# White Level for Red (integer)
#panoramix-bz-whitelevel-red=0

# White Level for Green (integer)
#panoramix-bz-whitelevel-green=0

# White Level for Blue (integer)
#panoramix-bz-whitelevel-blue=0

# Active windows (string)
#panoramix-active=

[clone] # Clone video filter

# Number of clones (integer)
#clone-count=2

# Video output modules (string)
#clone-vout-list=

[wall] # Wall video filter

# Number of columns (integer)
#wall-cols=3

# Number of rows (integer)
#wall-rows=3

# Active windows (string)
#wall-active=

# Element aspect ratio (string)
#wall-element-aspect=16:9

[access_output_http] # HTTP stream output

# Username (string)
#sout-http-user=

# Password (string)
#sout-http-pwd=

# Mime (string)
#sout-http-mime=

# Metacube (boolean)
#sout-http-metacube=0

[access_output_file] # File stream output

# Overwrite existing file (boolean)
#sout-file-overwrite=1

# Append to file (boolean)
#sout-file-append=0

# Format time and date (boolean)
#sout-file-format=0

# Synchronous writing (boolean)
#sout-file-sync=0

[access_output_shout] # IceCAST output

# Stream name (string)
#sout-shout-name=VLC media player - Live stream

# Stream description (string)
#sout-shout-description=Live stream from VLC media player

# Stream MP3 (boolean)
#sout-shout-mp3=0

# Genre description (string)
#sout-shout-genre=Alternative

# URL description (string)
#sout-shout-url=http://www.videolan.org/vlc

# Bitrate (string)
#sout-shout-bitrate=

# Samplerate (string)
#sout-shout-samplerate=

# Number of channels (string)
#sout-shout-channels=

# Ogg Vorbis Quality (string)
#sout-shout-quality=

# Stream public (boolean)
#sout-shout-public=0

[udp] # UDP stream output

# Caching value (ms) (integer)
#sout-udp-caching=300

# Group packets (integer)
#sout-udp-group=1

[access_output_livehttp] # HTTP Live streaming output

# Segment length (integer)
#sout-livehttp-seglen=10

# Number of segments (integer)
#sout-livehttp-numsegs=0

# Number of first segment (integer)
#sout-livehttp-initial-segment-number=1

# Split segments anywhere (boolean)
#sout-livehttp-splitanywhere=0

# Delete segments (boolean)
#sout-livehttp-delsegs=1

# Use muxers rate control mechanism (boolean)
#sout-livehttp-ratecontrol=0

# Allow cache (boolean)
#sout-livehttp-caching=0

# Use randomized IV for encryption (boolean)
#sout-livehttp-generate-iv=0

# Index file (string)
#sout-livehttp-index=

# Full URL to put in index file (string)
#sout-livehttp-index-url=

# AES key URI to place in playlist (string)
#sout-livehttp-key-uri=

# AES key file (string)
#sout-livehttp-key-file=

# File where vlc reads key-uri and keyfile-location (string)
#sout-livehttp-key-loadfile=

[sharpen] # Sharpen video filter

# Sharpen strength (0-2) (float)
#sharpen-sigma=0.050000

[adjust] # Image properties filter

# Image contrast (0-2) (float)
#contrast=1.000000

# Image brightness (0-2) (float)
#brightness=1.000000

# Image hue (0-360) (integer)
#hue=0

# Image saturation (0-3) (float)
#saturation=1.000000

# Image gamma (0-10) (float)
#gamma=1.000000

# Brightness threshold (boolean)
#brightness-threshold=0

[mosaic] # Mosaic video sub source

# Transparency (integer)
#mosaic-alpha=255

# Height (integer)
#mosaic-height=100

# Width (integer)
#mosaic-width=100

# Mosaic alignment (integer)
#mosaic-align=5

# Top left corner X coordinate (integer)
#mosaic-xoffset=0

# Top left corner Y coordinate (integer)
#mosaic-yoffset=0

# Border width (integer)
#mosaic-borderw=0

# Border height (integer)
#mosaic-borderh=0

# Positioning method (integer)
#mosaic-position=0

# Number of rows (integer)
#mosaic-rows=2

# Number of columns (integer)
#mosaic-cols=2

# Keep aspect ratio (boolean)
#mosaic-keep-aspect-ratio=0

# Keep original size (boolean)
#mosaic-keep-picture=0

# Elements order (string)
#mosaic-order=

# Offsets in order (string)
#mosaic-offsets=

# Delay (integer)
#mosaic-delay=0

[transform] # Video transformation filter

# Transform type (string)
#transform-type=90

[alphamask] # Alpha mask video filter

# Transparency mask (string)
#alphamask-mask=

[remoteosd] # Remote-OSD over VNC

# VNC Host (string)
#rmtosd-host=myvdr

# VNC Port (integer)
#rmtosd-port=20001

# VNC Password (string)
#rmtosd-password=

# VNC poll interval (integer)
#rmtosd-update=1000

# VNC polling (boolean)
#rmtosd-vnc-polling=0

# Mouse events (boolean)
#rmtosd-mouse-events=0

# Key events (boolean)
#rmtosd-key-events=0

# Alpha transparency value (default 255) (integer)
#rmtosd-alpha=255

[gradfun] # Gradfun video filter

# Radius (integer)
#gradfun-radius=16

# Strength (float)
#gradfun-strength=1.200000

[grain] # Grain video filter

# Variance (float)
#grain-variance=2.000000

# Minimal period (integer)
#grain-period-min=1

# Maximal period (integer)
#grain-period-max=48

[scene] # Scene video filter

# Image format (string)
#scene-format=png

# Image width (integer)
#scene-width=-1

# Image height (integer)
#scene-height=-1

# Filename prefix (string)
#scene-prefix=scene

# Directory path prefix (string)
#scene-path=

# Always write to the same file (boolean)
#scene-replace=0

# Recording ratio (integer)
#scene-ratio=50

[rss] # RSS and Atom feed display

# Feed URLs (string)
#rss-urls=

# X offset (integer)
#rss-x=0

# Y offset (integer)
#rss-y=0

# Text position (integer)
#rss-position=-1

# Opacity (integer)
#rss-opacity=255

# Color (integer)
#rss-color=16777215

# Font size, pixels (integer)
#rss-size=-1

# Speed of feeds (integer)
#rss-speed=100000

# Max length (integer)
#rss-length=60

# Refresh time (integer)
#rss-ttl=1800

# Feed images (boolean)
#rss-images=1

# Title display mode (integer)
#rss-title=-1

[blendbench] # Blending benchmark filter

# Number of time to blend (integer)
#blendbench-loops=1000

# Alpha of the blended image (integer)
#blendbench-alpha=128

# Image to be blended onto (string)
#blendbench-base-image=

# Chroma for the base image (string)
#blendbench-base-chroma=I420

# Image which will be blended (string)
#blendbench-blend-image=

# Chroma for the blend image (string)
#blendbench-blend-chroma=YUVA

[colorthres] # Color threshold filter

# Color (integer)
#colorthres-color=16711680

# Saturation threshold (integer)
#colorthres-saturationthres=20

# Similarity threshold (integer)
#colorthres-similaritythres=15

[atmo] # AtmoLight Filter

# Device type (integer)
#atmo-device=1

# Serial Port/Device (string)
#atmo-serialdev=/dev/ttyUSB0

# Color when paused (boolean)
#atmo-usepausecolor=0

# Pause-Red (integer)
#atmo-pcolor-red=0

# Pause-Green (integer)
#atmo-pcolor-green=0

# Pause-Blue (integer)
#atmo-pcolor-blue=192

# Pause-Fadesteps (integer)
#atmo-fadesteps=50

# End-Red (integer)
#atmo-ecolor-red=192

# End-Green (integer)
#atmo-ecolor-green=192

# End-Blue (integer)
#atmo-ecolor-blue=192

# End-Fadesteps (integer)
#atmo-efadesteps=50

# Count of AtmoLight channels (integer)
#atmo-dmx-channels=5

# DMX address for each channel (string)
#atmo-dmx-chbase=0,3,6,9,12

# Count of channels (integer)
#atmo-momo-channels=3

# Count of fnordlicht's (integer)
#atmo-fnordlicht-amount=2

# Number of zones on top (integer)
#atmo-zones-top=1

# Number of zones on bottom (integer)
#atmo-zones-bottom=1

# Zones on left / right side (integer)
#atmo-zones-lr=1

# Calculate a average zone (boolean)
#atmo-zone-summary=0

# Edge weightning (integer)
#atmo-edgeweightning=3

# Brightness (integer)
#atmo-brightness=100

# Darkness limit (integer)
#atmo-darknesslimit=3

# Hue windowing (integer)
#atmo-huewinsize=3

# Sat windowing (integer)
#atmo-satwinsize=3

# Output Color filter mode (integer)
#atmo-filtermode=1

# Filter length (ms) (integer)
#atmo-meanlength=300

# Filter threshold (integer)
#atmo-meanthreshold=40

# Filter smoothness (%) (integer)
#atmo-percentnew=50

# Frame delay (ms) (integer)
#atmo-framedelay=18

# Channel 0: summary (integer)
#atmo-channel_0=4

# Channel 1: left (integer)
#atmo-channel_1=3

# Channel 2: right (integer)
#atmo-channel_2=1

# Channel 3: top (integer)
#atmo-channel_3=0

# Channel 4: bottom (integer)
#atmo-channel_4=2

# Channel / Zone Assignment (string)
#atmo-channels=

# Use Software White adjust (boolean)
#atmo-whiteadj=1

# White Red (integer)
#atmo-white-red=255

# White Green (integer)
#atmo-white-green=255

# White Blue (integer)
#atmo-white-blue=255

# Zone 0: Top gradient (string)
#atmo-gradient_zone_0=

# Zone 1: Right gradient (string)
#atmo-gradient_zone_1=

# Zone 2: Bottom gradient (string)
#atmo-gradient_zone_2=

# Zone 3: Left gradient (string)
#atmo-gradient_zone_3=

# Zone 4: Summary gradient (string)
#atmo-gradient_zone_4=

# Gradient bitmap searchpath (string)
#atmo-gradient_path=

# Extracted Image Width (integer)
#atmo-width=64

# Extracted Image Height (integer)
#atmo-height=48

# Mark analyzed pixels (boolean)
#atmo-showdots=0

[canvas] # Canvas video filter

# Output width (integer)
#canvas-width=0

# Output height (integer)
#canvas-height=0

# Output picture aspect ratio (string)
#canvas-aspect=

# Pad video (boolean)
#canvas-padd=1

[croppadd] # Video cropping filter

# Pixels to crop from top (integer)
#croppadd-croptop=0

# Pixels to crop from bottom (integer)
#croppadd-cropbottom=0

# Pixels to crop from left (integer)
#croppadd-cropleft=0

# Pixels to crop from right (integer)
#croppadd-cropright=0

# Pixels to padd to top (integer)
#croppadd-paddtop=0

# Pixels to padd to bottom (integer)
#croppadd-paddbottom=0

# Pixels to padd to left (integer)
#croppadd-paddleft=0

# Pixels to padd to right (integer)
#croppadd-paddright=0

[mirror] # Mirror video filter

# Mirror orientation (integer)
#mirror-split=0

# Direction (integer)
#mirror-direction=0

[posterize] # Posterize video filter

# Posterize level (integer)
#posterize-level=6

[logo] # Logo sub source

# Logo filenames (string)
#logo-file=

# X coordinate (integer)
#logo-x=-1

# Y coordinate (integer)
#logo-y=-1

# Logo individual image time in ms (integer)
#logo-delay=1000

# Logo animation # of loops (integer)
#logo-repeat=-1

# Opacity of the logo (integer)
#logo-opacity=255

# Logo position (integer)
#logo-position=-1

[ball] # Ball video filter

# Ball color (string)
#ball-color=red

# Ball speed (integer)
#ball-speed=4

# Ball size (integer)
#ball-size=10

# Gradient threshold (integer)
#ball-gradient-threshold=40

# Edge visible (boolean)
#ball-edge-visible=1

[erase] # Erase video filter

# Image mask (string)
#erase-mask=

# X coordinate (integer)
#erase-x=0

# Y coordinate (integer)
#erase-y=0

[anaglyph] # Convert 3D picture to anaglyph image video filter

# Color scheme (string)
#anaglyph-scheme=red-cyan

[bluescreen] # Bluescreen video filter

# Bluescreen U value (integer)
#bluescreen-u=120

# Bluescreen V value (integer)
#bluescreen-v=90

# Bluescreen U tolerance (integer)
#bluescreen-ut=17

# Bluescreen V tolerance (integer)
#bluescreen-vt=17

[dynamicoverlay] # Dynamic video overlay

# Input FIFO (string)
#overlay-input=

# Output FIFO (string)
#overlay-output=

[antiflicker] # antiflicker video filter

# Window size (integer)
#antiflicker-window-size=10

# Softening value (integer)
#antiflicker-softening-size=10

[rotate] # Rotate video filter

# Angle in degrees (float)
#rotate-angle=30.000000

# Use motion sensors (boolean)
#rotate-use-motion=0

[deinterlace] # Deinterlacing video filter

# Streaming deinterlace mode (string)
#sout-deinterlace-mode=blend

# Phosphor chroma mode for 4:2:0 input (integer)
#sout-deinterlace-phosphor-chroma=2

# Phosphor old field dimmer strength (integer)
#sout-deinterlace-phosphor-dimmer=2

[extract] # Extract RGB component video filter

# RGB component to extract (integer)
#extract-component=16711680

[marq] # Marquee display

# Text (string)
#marq-marquee=VLC

# Text file (string)
#marq-file=

# X offset (integer)
#marq-x=0

# Y offset (integer)
#marq-y=0

# Marquee position (integer)
#marq-position=-1

# Opacity (integer)
#marq-opacity=255

# Color (integer)
#marq-color=16777215

# Font size, pixels (integer)
#marq-size=-1

# Timeout (integer)
#marq-timeout=0

# Refresh period in ms (integer)
#marq-refresh=1000

[hqdn3d] # High Quality 3D Denoiser filter

# Spatial luma strength (0-254) (float)
#hqdn3d-luma-spat=4.000000

# Spatial chroma strength (0-254) (float)
#hqdn3d-chroma-spat=3.000000

# Temporal luma strength (0-254) (float)
#hqdn3d-luma-temp=6.000000

# Temporal chroma strength (0-254) (float)
#hqdn3d-chroma-temp=4.500000

[gradient] # Gradient video filter

# Distort mode (string)
#gradient-mode=gradient

# Gradient image type (integer)
#gradient-type=0

# Apply cartoon effect (boolean)
#gradient-cartoon=1

[motionblur] # Motion blur filter

# Blur factor (1-127) (integer)
#blur-factor=80

[subsdelay] # Subtitle delay

# Delay calculation mode (integer)
#subsdelay-mode=1

# Calculation factor (float)
#subsdelay-factor=2.000000

# Maximum overlapping subtitles (integer)
#subsdelay-overlap=3

# Minimum alpha value (integer)
#subsdelay-min-alpha=70

# Interval between two disappearances (integer)
#subsdelay-min-stops=1000

# Interval between appearance and disappearance (integer)
#subsdelay-min-start-stop=1000

# Interval between disappearance and appearance (integer)
#subsdelay-min-stop-start=1000

[sepia] # Sepia video filter

# Sepia intensity (integer)
#sepia-intensity=120

[audiobargraph_v] # Audio Bar Graph Video sub source

# X coordinate (integer)
#audiobargraph_v-x=0

# Y coordinate (integer)
#audiobargraph_v-y=0

# Transparency of the bargraph (integer)
#audiobargraph_v-transparency=255

# Bargraph position (integer)
#audiobargraph_v-position=-1

# Bar width in pixel (default : 10) (integer)
#audiobargraph_v-barWidth=10

[puzzle] # Puzzle interactive game video filter

# Number of puzzle rows (integer)
#puzzle-rows=4

# Number of puzzle columns (integer)
#puzzle-cols=4

# Border (integer)
#puzzle-border=3

# Small preview (boolean)
#puzzle-preview=0

# Small preview size (integer)
#puzzle-preview-size=15

# Piece edge shape size (integer)
#puzzle-shape-size=90

# Auto shuffle (integer)
#puzzle-auto-shuffle=0

# Auto solve (integer)
#puzzle-auto-solve=0

# Rotation (integer)
#puzzle-rotation=0

# Game mode (integer)
#puzzle-mode=0

[gaussianblur] # Gaussian blur video filter

# Gaussian's std deviation (float)
#gaussianblur-sigma=2.000000

[postproc] # Video post processing filter

# Post processing quality (integer)
#postproc-q=6

# FFmpeg post processing filter chains (string)
#postproc-name=default

[logger] # File logging

# Log filename (string)
#logfile=

# Log format (string)
#logmode=text

# Syslog ident (string)
#syslog-ident=vlc

# Syslog facility (string)
#syslog-facility=user

# Verbosity (integer)
#log-verbose=-1

[gnutls] # GNU TLS transport layer security

# TLS cipher priorities (string)
#gnutls-priorities=NORMAL

[vod_rtsp] # Legacy RTSP VoD server

# MUX for RAW RTSP transport (string)
#rtsp-raw-mux=ts

# Maximum number of connections (integer)
#rtsp-throttle-users=0

# Sets the timeout option in the RTSP session string (integer)
#rtsp-session-timeout=5

[audioscrobbler] # Submission of played songs to last.fm

# Username (string)
#lastfm-username=

# Password (string)
#lastfm-password=

# Scrobbler URL (string)
#scrobbler-url=post.audioscrobbler.com

[notify] # LibNotify Notification Plugin

# Timeout (ms) (integer)
#notify-timeout=4000

[lirc] # Infrared remote control interface

# Change the lirc configuration file (string)
#lirc-file=

[motion] # motion control interface

[netsync] # Network synchronization

# Network master clock (boolean)
#netsync-master=0

# Master server ip address (string)
#netsync-master-ip=

# UDP timeout (in ms) (integer)
#netsync-timeout=500

[gestures] # Mouse gestures control interface

# Motion threshold (10-100) (integer)
#gestures-threshold=30

# Trigger button (string)
#gestures-button=left

[oldrc] # Remote control interface

# Show stream position (boolean)
#rc-show-pos=0

# Fake TTY (boolean)
#rc-fake-tty=0

# UNIX socket command input (string)
#rc-unix=

# TCP command input (string)
#rc-host=

[dash] # Dynamic Adaptive Streaming over HTTP

# Preferred Width (integer)
#dash-prefwidth=480

# Preferred Height (integer)
#dash-prefheight=360

# Buffer Size (Seconds) (integer)
#dash-buffersize=30

[swscale] # Video scaling filter

# Scaling mode (integer)
#swscale-mode=2

[lua] # Lua interpreter

# Lua interface (string)
#lua-intf=dummy

# Lua interface configuration (string)
#lua-config=

# Password (string)
#http-password=

# Source directory (string)
#http-src=

# Directory index (boolean)
#http-index=0

# TCP command input (string)
#rc-host=

# CLI input (string)
#cli-host=

# Host (string)
#telnet-host=localhost

# Port (integer)
#telnet-port=4212

# Password (string)
#telnet-password=

[folder] # Folder meta data

# Album art filename (string)
#album-art-filename=

[yuv] # YUV video output

# device, fifo or filename (string)
#yuv-file=stream.yuv

# Chroma used (string)
#yuv-chroma=

# YUV4MPEG2 header (default disabled) (boolean)
#yuv-yuv4mpeg2=0

[vmem] # Video memory output

# Width (integer)
#vmem-width=320

# Height (integer)
#vmem-height=200

# Pitch (integer)
#vmem-pitch=640

# Chroma (string)
#vmem-chroma=RV16

[xcb_window] # X11 video window (XCB)

# X11 display (string)
#x11-display=

[gl] # OpenGL video output (experimental)

# OpenGL extension (string)
gl=any

[xcb_xv] # XVideo output (XCB)

# XVideo adaptor number (integer)
#xvideo-adaptor=-1

# XVideo format id (integer)
#xvideo-format-id=0

[gles2] # OpenGL for Embedded Systems 2 video output

# OpenGL ES 2 extension (string)
#gles2=

[xcb_x11] # X11 video output (XCB)

[vdummy] # Dummy video output

# Dummy image chroma format (string)
#dummy-chroma=

[fb] # GNU/Linux framebuffer video output

# Framebuffer device (string)
#fbdev=/dev/fb0

# Run fb on current tty (boolean)
#fb-tty=1

# Image format (default RGB) (string)
#fb-chroma=

# Framebuffer resolution to use (integer)
#fb-mode=4

# Framebuffer uses hw acceleration (boolean)
#fb-hw-accel=1

[speex_resampler] # Speex resampler

# Resampling quality (integer)
#speex-resampler-quality=4

[audiobargraph_a] # Audio part of the BarGraph function

# Defines if BarGraph information should be sent (integer)
#audiobargraph_a-bargraph=1

# Sends the barGraph information every n audio packets (integer)
#audiobargraph_a-bargraph_repetition=4

# Defines if silence alarm information should be sent (integer)
#audiobargraph_a-silence=1

# Time window to use in ms (integer)
#audiobargraph_a-time_window=5000

# Minimum Audio level to raise the alarm (float)
#audiobargraph_a-alarm_threshold=0.020000

# Time between two alarm messages in ms (integer)
#audiobargraph_a-repetition_time=2000

[headphone_channel_mixer] # Headphone virtual spatialization effect

# Characteristic dimension (integer)
#headphone-dim=10

# Compensate delay (boolean)
#headphone-compensate=0

# No decoding of Dolby Surround (boolean)
#headphone-dolby=0

[remap] # Audio channel remapper

# Left (integer)
#aout-remap-channel-left=0

# Center (integer)
#aout-remap-channel-center=1

# Right (integer)
#aout-remap-channel-right=2

# Rear left (integer)
#aout-remap-channel-rearleft=3

# Rear center (integer)
#aout-remap-channel-rearcenter=4

# Rear right (integer)
#aout-remap-channel-rearright=5

# Side left (integer)
#aout-remap-channel-middleleft=6

# Side right (integer)
#aout-remap-channel-middleright=7

# Low-frequency effects (integer)
#aout-remap-channel-lfe=8

# Normalize channels (boolean)
#aout-remap-normalize=1

[samplerate] # Secret Rabbit Code (libsamplerate) resampler

# Sample rate converter type (integer)
#src-converter-type=2

[stereo_widen] # Simple stereo widening effect

# Delay time (float)
#delay=20.000000

# Feedback gain (float)
#feedback=0.300000

# Crossfeed (float)
#crossfeed=0.300000

# Dry mix (float)
#dry-mix=0.800000

[gain] # Gain control filter

# Gain multiplier (float)
#gain-value=1.000000

[mono] # Stereo to mono downmixer

# Use downmix algorithm (boolean)
#sout-mono-downmix=1

# Select channel to keep (integer)
#sout-mono-channel=-1

[compressor] # Dynamic range compressor

# RMS/peak (float)
#compressor-rms-peak=0.000000

# Attack time (float)
#compressor-attack=25.000000

# Release time (float)
#compressor-release=100.000000

# Threshold level (float)
#compressor-threshold=-11.000000

# Ratio (float)
#compressor-ratio=8.000000

# Knee radius (float)
#compressor-knee=2.500000

# Makeup gain (float)
#compressor-makeup-gain=7.000000

[chorus_flanger] # Sound Delay

# Delay time (float)
#delay-time=20.000000

# Sweep Depth (float)
#sweep-depth=6.000000

# Sweep Rate (float)
#sweep-rate=6.000000

# Feedback gain (float)
#feedback-gain=0.500000

# Wet mix (float)
#wet-mix=0.400000

# Dry Mix (float)
#dry-mix=0.400000

[equalizer] # Equalizer with 10 bands

# Equalizer preset (string)
#equalizer-preset=flat

# Bands gain (string)
#equalizer-bands=

# Two pass (boolean)
#equalizer-2pass=0

# Use VLC frequency bands (boolean)
#equalizer-vlcfreqs=1

# Global gain (float)
#equalizer-preamp=12.000000

[spatializer] # Audio Spatializer

# Room size (float)
#spatializer-roomsize=0.850000

# Room width (float)
#spatializer-width=1.000000

# Wet (float)
#spatializer-wet=0.400000

# Dry (float)
#spatializer-dry=0.500000

# Damp (float)
#spatializer-damp=0.500000

[a52tofloat32] # ATSC A/52 (AC-3) audio decoder

# A/52 dynamic range compression (boolean)
#a52-dynrng=1

# Enable internal upmixing (boolean)
#a52-upmix=0

[normvol] # Volume normalizer

# Number of audio buffers (integer)
#norm-buff-size=20

# Maximal volume level (float)
#norm-max-level=2.000000

[param_eq] # Parametric Equalizer

# Low freq (Hz) (float)
#param-eq-lowf=100.000000

# Low freq gain (dB) (float)
#param-eq-lowgain=0.000000

# High freq (Hz) (float)
#param-eq-highf=10000.000000

# High freq gain (dB) (float)
#param-eq-highgain=0.000000

# Freq 1 (Hz) (float)
#param-eq-f1=300.000000

# Freq 1 gain (dB) (float)
#param-eq-gain1=0.000000

# Freq 1 Q (float)
#param-eq-q1=3.000000

# Freq 2 (Hz) (float)
#param-eq-f2=1000.000000

# Freq 2 gain (dB) (float)
#param-eq-gain2=0.000000

# Freq 2 Q (float)
#param-eq-q2=3.000000

# Freq 3 (Hz) (float)
#param-eq-f3=3000.000000

# Freq 3 gain (dB) (float)
#param-eq-gain3=0.000000

# Freq 3 Q (float)
#param-eq-q3=3.000000

[dtstofloat32] # DTS Coherent Acoustics audio decoder

# DTS dynamic range compression (boolean)
#dts-dynrng=1

[scaletempo] # Audio tempo scaler synched with rate

# Stride Length (integer)
#scaletempo-stride=30

# Overlap Length (float)
#scaletempo-overlap=0.200000

# Search Length (integer)
#scaletempo-search=14

[mux_mp4] # MP4/MOV muxer

# Create "Fast Start" files (boolean)
#sout-mp4-faststart=1

[mux_ps] # PS muxer

# DTS delay (ms) (integer)
#sout-ps-dts-delay=200

# PES maximum size (integer)
#sout-ps-pes-max-size=65500

[mux_ogg] # Ogg/OGM muxer

# Index interval (integer)
#sout-ogg-indexintvl=1000

# Index size ratio (float)
#sout-ogg-indexratio=1.000000

[mux_asf] # ASF muxer

# Title (string)
#sout-asf-title=

# Author (string)
#sout-asf-author=

# Copyright (string)
#sout-asf-copyright=

# Comment (string)
#sout-asf-comment=

# Rating (string)
#sout-asf-rating=

# Packet Size (integer)
#sout-asf-packet-size=4096

# Bitrate override (integer)
#sout-asf-bitrate-override=0

[mux_ts] # TS muxer (libdvbpsi)

# Video PID (integer)
#sout-ts-pid-video=0

# Audio PID (integer)
#sout-ts-pid-audio=0

# SPU PID (integer)
#sout-ts-pid-spu=0

# PMT PID (integer)
#sout-ts-pid-pmt=0

# TS ID (integer)
#sout-ts-tsid=0

# NET ID (integer)
#sout-ts-netid=0

# PMT Program numbers (string)
#sout-ts-program-pmt=

# Set PID to ID of ES (boolean)
#sout-ts-es-id-pid=0

# Mux PMT (requires --sout-ts-es-id-pid) (string)
#sout-ts-muxpmt=

# SDT Descriptors (requires --sout-ts-es-id-pid) (string)
#sout-ts-sdtdesc=

# Data alignment (boolean)
#sout-ts-alignment=1

# Shaping delay (ms) (integer)
#sout-ts-shaping=200

# Use keyframes (boolean)
#sout-ts-use-key-frames=0

# PCR interval (ms) (integer)
#sout-ts-pcr=70

# Minimum B (deprecated) (integer)
#sout-ts-bmin=0

# Maximum B (deprecated) (integer)
#sout-ts-bmax=0

# DTS delay (ms) (integer)
#sout-ts-dts-delay=400

# Crypt audio (boolean)
#sout-ts-crypt-audio=1

# Crypt video (boolean)
#sout-ts-crypt-video=1

# CSA Key (string)
#sout-ts-csa-ck=

# Second CSA Key (string)
#sout-ts-csa2-ck=

# CSA Key in use (string)
#sout-ts-csa-use=1

# Packet size in bytes to encrypt (integer)
#sout-ts-csa-pkt=188

[mux_avi] # AVI muxer

# Artist (string)
#sout-avi-artist=

# Date (string)
#sout-avi-date=

# Genre (string)
#sout-avi-genre=

# Copyright (string)
#sout-avi-copyright=

# Comment (string)
#sout-avi-comment=

# Name (string)
#sout-avi-name=

# Subject (string)
#sout-avi-subject=

# Encoder (string)
#sout-avi-encoder=VLC Media Player - 2.2.2 Weatherwax

# Keywords (string)
#sout-avi-keywords=

[sap] # Network streams (SAP)

# SAP multicast address (string)
#sap-addr=

# SAP timeout (seconds) (integer)
#sap-timeout=1800

# Try to parse the announce (boolean)
#sap-parse=1

# SAP Strict mode (boolean)
#sap-strict=0

[podcast] # Podcasts

# Podcast URLs list (string)
#podcast-urls=

[freetype] # Freetype2 font renderer

# Font (string)
freetype-font=DejaVu Sans

# Monospace Font (string)
#freetype-monofont=Monospace

# Font size in pixels (integer)
#freetype-fontsize=0

# Relative font size (integer)
#freetype-rel-fontsize=16

# Text opacity (integer)
#freetype-opacity=255

# Text default color (integer)
#freetype-color=16777215

# Force bold (boolean)
#freetype-bold=0

# Background opacity (integer)
#freetype-background-opacity=0

# Background color (integer)
#freetype-background-color=0

# Outline opacity (integer)
#freetype-outline-opacity=255

# Outline color (integer)
#freetype-outline-color=0

# Outline thickness (integer)
#freetype-outline-thickness=4

# Shadow opacity (integer)
#freetype-shadow-opacity=128

# Shadow color (integer)
#freetype-shadow-color=0

# Shadow angle (float)
#freetype-shadow-angle=-45.000000

# Shadow distance (float)
#freetype-shadow-distance=0.060000

# Use YUVP renderer (boolean)
#freetype-yuvp=0

[afile] # File audio output

# Output file (string)
#audiofile-file=audiofile.wav

# Output format (string)
#audiofile-format=s16

# Number of output channels (integer)
#audiofile-channels=0

# Add WAVE header (boolean)
#audiofile-wav=1

[amem] # Audio memory output

# Sample format (string)
#amem-format=S16N

# Sample rate (integer)
#amem-rate=44100

# Channels count (integer)
#amem-channels=2

[alsa] # ALSA audio output

# Audio output device (string)
#alsa-audio-device=default

# Audio output channels (integer)
#alsa-audio-channels=6

# Software gain (float)
#alsa-gain=1.000000

[mkv] # Matroska stream demuxer

# Respect ordered chapters (boolean)
#mkv-use-ordered-chapters=1

# Chapter codecs (boolean)
#mkv-use-chapter-codec=1

# Preload MKV files in the same directory (boolean)
#mkv-preload-local-dir=1

# Seek based on percent not time (boolean)
#mkv-seek-percent=0

# Dummy Elements (boolean)
#mkv-use-dummy=0

[demuxdump] # File dumper

# Dump module (string)
#demuxdump-access=file

# Dump filename (string)
#demuxdump-file=stream-demux.dump

# Append to existing file (boolean)
#demuxdump-append=0

[rawvid] # Raw video demuxer

# Frames per Second (string)
#rawvid-fps=

# Width (integer)
#rawvid-width=0

# Height (integer)
#rawvid-height=0

# Force chroma (Use carefully) (string)
#rawvid-chroma=

# Aspect ratio (string)
#rawvid-aspect-ratio=

[h264] # H264 video demuxer

# Frames per Second (float)
#h264-fps=25.000000

[ps] # MPEG-PS demuxer

# Trust MPEG timestamps (boolean)
#ps-trust-timestamps=1

[vc1] # VC1 video demuxer

# Frames per Second (float)
#vc1-fps=25.000000

[diracsys] # Dirac video demuxer

# Value to adjust dts by (integer)
#dirac-dts-offset=0

[rawdv] # DV (Digital Video) demuxer

# Hurry up (boolean)
#rawdv-hurry-up=0

[mjpeg] # M-JPEG camera demuxer

# Frames per Second (float)
#mjpeg-fps=0.000000

[ts] # MPEG Transport Stream demuxer

# Extra PMT (string)
#ts-extra-pmt=

# Trust in-stream PCR (boolean)
#ts-trust-pcr=1

# Set id of ES to PID (boolean)
#ts-es-id-pid=1

# CSA Key (string)
#ts-csa-ck=

# Second CSA Key (string)
#ts-csa2-ck=

# Packet size in bytes to decrypt (integer)
#ts-csa-pkt=188

# Separate sub-streams (boolean)
#ts-split-es=1

# Seek based on percent not time (boolean)
#ts-seek-percent=0

[playlist] # Playlist

# Skip ads (boolean)
#playlist-skip-ads=1

# Show shoutcast adult content (boolean)
#shoutcast-show-adult=0

[subtitle] # Text subtitle parser

# Frames per Second (float)
#sub-fps=0.000000

# Subtitle delay (integer)
#sub-delay=0

# Subtitle format (string)
#sub-type=auto

# Subtitle description (string)
#sub-description=

[mod] # MOD demuxer (libmodplug)

# Noise reduction (boolean)
#mod-noisereduction=1

# Reverb (boolean)
#mod-reverb=0

# Reverberation level (integer)
#mod-reverb-level=0

# Reverberation delay (integer)
#mod-reverb-delay=40

# Mega bass (boolean)
#mod-megabass=0

# Mega bass level (integer)
#mod-megabass-level=0

# Mega bass cutoff (integer)
#mod-megabass-range=10

# Surround (boolean)
#mod-surround=0

# Surround level (integer)
#mod-surround-level=0

# Surround delay (ms) (integer)
#mod-surround-delay=5

[avi] # AVI demuxer

# Force interleaved method (boolean)
#avi-interleaved=0

# Force index creation (integer)
#avi-index=0

[image] # Image demuxer

# ES ID (integer)
#image-id=-1

# Group (integer)
#image-group=0

# Decode (boolean)
#image-decode=1

# Forced chroma (string)
#image-chroma=

# Duration in seconds (float)
#image-duration=10.000000

# Frame rate (string)
#image-fps=10/1

# Real-time (boolean)
#image-realtime=0

[hevc] # HEVC/H.265 video demuxer

# Frames per Second (float)
#hevc-force-fps=0.000000

[es] # MPEG-I/II/4 / A52 / DTS / MLP audio

# Frames per Second (float)
#es-fps=25.000000

[rawaud] # Raw audio demuxer

# Audio channels (integer)
#rawaud-channels=2

# Audio samplerate (Hz) (integer)
#rawaud-samplerate=48000

# FOURCC code of raw input format (string)
#rawaud-fourcc=s16l

# Forces the audio language (string)
#rawaud-lang=eng

[avformat] # Avformat demuxer

# Format name (string)
#avformat-format=

# Advanced options (string)
#avformat-options=

# Avformat mux (string)
#sout-avformat-mux=

# Advanced options (string)
#sout-avformat-options=

[glspectrum] # 3D OpenGL spectrum visualization

# Video width (integer)
#glspectrum-width=400

# Video height (integer)
#glspectrum-height=300

[visual] # Visualizer filter

# Effects list (string)
#effect-list=spectrum

# Video width (integer)
#effect-width=800

# Video height (integer)
#effect-height=500

# FFT window (string)
#effect-fft-window=flat

# Kaiser window parameter (float)
#effect-kaiser-param=3.000000

# Show 80 bands instead of 20 (boolean)
#visual-80-bands=1

# Draw peaks in the analyzer (boolean)
#visual-peaks=1

# Enable original graphic spectrum (boolean)
#spect-show-original=0

# Draw the base of the bands (boolean)
#spect-show-base=1

# Base pixel radius (integer)
#spect-radius=42

# Spectral sections (integer)
#spect-sections=3

# V-plane color (integer)
#spect-color=80

# Draw bands in the spectrometer (boolean)
#spect-show-bands=1

# Show 80 bands instead of 20 (boolean)
#spect-80-bands=1

# Number of blank pixels between bands. (integer)
#spect-separ=1

# Amplification (integer)
#spect-amp=8

# Draw peaks in the analyzer (boolean)
#spect-show-peaks=1

# Peak extra width (integer)
#spect-peak-width=61

# Peak height (integer)
#spect-peak-height=1

[core] # core program

# Enable audio (boolean)
#audio=1

# Audio gain (float)
#gain=1.000000

# Audio output volume step (float)
#volume-step=12.800000

# Remember the audio volume (boolean)
#volume-save=1

# Use S/PDIF when available (boolean)
#spdif=0

# Force detection of Dolby Surround (integer)
#force-dolby-surround=0

# Stereo audio output mode (integer)
#stereo-mode=0

# Audio desynchronization compensation (integer)
#audio-desync=0

# Audio resampler (string)
audio-resampler=any

# Replay gain mode (string)
#audio-replay-gain-mode=none

# Replay preamp (float)
#audio-replay-gain-preamp=0.000000

# Default replay gain (float)
#audio-replay-gain-default=-7.000000

# Peak protection (boolean)
#audio-replay-gain-peak-protection=1

# Enable time stretching audio (boolean)
#audio-time-stretch=1

# Audio output module (string)
aout=any

# Audio filters (string)
#audio-filter=

# Audio visualizations (string)
#audio-visual=none

# Enable video (boolean)
#video=1

# Grayscale video output (boolean)
#grayscale=0

# Fullscreen video output (boolean)
#fullscreen=0

# Embedded video (boolean)
#embedded-video=1

#  (boolean)
#xlib=1

# Drop late frames (boolean)
#drop-late-frames=1

# Skip frames (boolean)
#skip-frames=1

# Quiet synchro (boolean)
#quiet-synchro=0

# Key press events (boolean)
#keyboard-events=1

# Mouse events (boolean)
#mouse-events=1

# Overlay video output (boolean)
#overlay=1

# Always on top (boolean)
#video-on-top=0

# Enable wallpaper mode  (boolean)
#video-wallpaper=0

# Disable screensaver (boolean)
#disable-screensaver=1

# Show media title on video (boolean)
#video-title-show=1

# Show video title for x milliseconds (integer)
#video-title-timeout=5000

# Position of video title (integer)
#video-title-position=8

# Hide cursor and fullscreen controller after x milliseconds (integer)
#mouse-hide-timeout=1000

# Video snapshot directory (or filename) (string)
#snapshot-path=

# Video snapshot file prefix (string)
#snapshot-prefix=vlcsnap-

# Video snapshot format (string)
#snapshot-format=png

# Display video snapshot preview (boolean)
#snapshot-preview=1

# Use sequential numbers instead of timestamps (boolean)
#snapshot-sequential=0

# Video snapshot width (integer)
#snapshot-width=-1

# Video snapshot height (integer)
#snapshot-height=-1

# Video width (integer)
#width=-1

# Video height (integer)
#height=-1

# Video X coordinate (integer)
#video-x=0

# Video Y coordinate (integer)
#video-y=0

# Video cropping (string)
#crop=

# Custom crop ratios list (string)
#custom-crop-ratios=

# Source aspect ratio (string)
#aspect-ratio=

# Video Auto Scaling (boolean)
#autoscale=1

# Video scaling factor (float)
#scale=1.000000

# Monitor pixel aspect ratio (string)
#monitor-par=

# Custom aspect ratios list (string)
#custom-aspect-ratios=

# Fix HDTV height (boolean)
#hdtv-fix=1

# Window decorations (boolean)
#video-deco=1

# Video title (string)
#video-title=

# Video alignment (integer)
#align=0

# Zoom video (float)
#zoom=1.000000

# Deinterlace (integer)
#deinterlace=0

# Deinterlace mode (string)
#deinterlace-mode=blend

# Video output module (string)
vout=xcb_xv

# Video filter module (string)
#video-filter=

# Video splitter module (string)
#video-splitter=

# Enable sub-pictures (boolean)
#spu=1

# On Screen Display (boolean)
#osd=1

# Text rendering module (string)
#text-renderer=

# Use subtitle file (string)
#sub-file=

# Autodetect subtitle files (boolean)
#sub-autodetect-file=1

# Subtitle autodetection fuzziness (integer)
#sub-autodetect-fuzzy=3

# Subtitle autodetection paths (string)
#sub-autodetect-path=./Subtitles, ./subtitles, ./Subs, ./subs

# Force subtitle position (integer)
#sub-margin=0

# Subpictures source module (string)
#sub-source=

# Subpictures filter module (string)
#sub-filter=

# Program (integer)
#program=0

# Programs (string)
#programs=

# Audio track (integer)
#audio-track=-1

# Subtitle track (integer)
#sub-track=-1

# Audio language (string)
#audio-language=

# Subtitle language (string)
#sub-language=

# Menu language (string)
#menu-language=

# Audio track ID (integer)
#audio-track-id=-1

# Subtitle track ID (integer)
#sub-track-id=-1

# Preferred video resolution (integer)
#preferred-resolution=-1

# Input repetitions (integer)
#input-repeat=0

# Start time (float)
#start-time=0.000000

# Stop time (float)
#stop-time=0.000000

# Run time (float)
#run-time=0.000000

# Fast seek (boolean)
#input-fast-seek=0

# Playback speed (float)
#rate=1.000000

# Input list (string)
#input-list=

# Input slave (experimental) (string)
#input-slave=

# Bookmarks list for a stream (string)
#bookmarks=

# DVD device (string)
#dvd=/dev/sr0

# VCD device (string)
#vcd=/dev/sr0

# Audio CD device (string)
#cd-audio=/dev/sr0

# MTU of the network interface (integer)
#mtu=1400

# TCP connection timeout (integer)
#ipv4-timeout=5000

# HTTP server address (string)
#http-host=

# HTTP server port (integer)
#http-port=8080

# HTTPS server port (integer)
#https-port=8443

# RTSP server address (string)
#rtsp-host=

# RTSP server port (integer)
#rtsp-port=554

# HTTP/TLS server certificate (string)
#http-cert=

# HTTP/TLS server private key (string)
#http-key=

# HTTP/TLS Certificate Authority (string)
#http-ca=

# HTTP/TLS Certificate Revocation List (string)
#http-crl=

# SOCKS server (string)
#socks=

# SOCKS user name (string)
#socks-user=

# SOCKS password (string)
#socks-pwd=

# Title metadata (string)
#meta-title=

# Author metadata (string)
#meta-author=

# Artist metadata (string)
#meta-artist=

# Genre metadata (string)
#meta-genre=

# Copyright metadata (string)
#meta-copyright=

# Description metadata (string)
#meta-description=

# Date metadata (string)
#meta-date=

# URL metadata (string)
#meta-url=

# File caching (ms) (integer)
#file-caching=300

# Live capture caching (ms) (integer)
#live-caching=300

# Disc caching (ms) (integer)
#disc-caching=300

# Network caching (ms) (integer)
#network-caching=1000

# Clock reference average counter (integer)
#cr-average=40

# Clock synchronisation (integer)
#clock-synchro=-1

# Clock jitter (integer)
#clock-jitter=5000

# Network synchronisation (boolean)
#network-synchronisation=0

# Record directory or filename (string)
#input-record-path=

# Prefer native stream recording (boolean)
#input-record-native=1

# Timeshift directory (string)
#input-timeshift-path=

# Timeshift granularity (integer)
#input-timeshift-granularity=-1

# Change title according to current media (string)
#input-title-format=$Z

# Preferred decoders list (string)
#codec=

# Preferred encoders list (string)
#encoder=

# Access module (string)
#access=

# Demux module (string)
#demux=any

# Stream filter module (string)
#stream-filter=

# Default stream output chain (string)
#sout=

# Display while streaming (boolean)
#sout-display=0

# Keep stream output open (boolean)
#sout-keep=0

# Enable streaming of all ES (boolean)
#sout-all=1

# Enable audio stream output (boolean)
#sout-audio=1

# Enable video stream output (boolean)
#sout-video=1

# Enable SPU stream output (boolean)
#sout-spu=1

# Stream output muxer caching (ms) (integer)
#sout-mux-caching=1500

# VLM configuration file (string)
#vlm-conf=

# SAP announcement interval (integer)
#sap-interval=5

# Mux module (string)
#mux=

# Access output module (string)
access_output=any

# Hop limit (TTL) (integer)
#ttl=-1

# Multicast output interface (string)
#miface=

# DiffServ Code Point (integer)
#dscp=0

# Preferred packetizer list (string)
packetizer=any

# VoD server module (string)
#vod-server=

# Use a plugins cache (boolean)
#plugins-cache=1

# Allow real-time priority (boolean)
#rt-priority=0

# Adjust VLC priority (integer)
#rt-offset=0

# Inhibit the power management daemon during playback (boolean)
#inhibit=1

# Play files randomly forever (boolean)
#random=0

# Repeat all (boolean)
#loop=0

# Repeat current item (boolean)
#repeat=0

# Play and exit (boolean)
#play-and-exit=0

# Play and stop (boolean)
#play-and-stop=0

# Play and pause (boolean)
#play-and-pause=0

# Auto start (boolean)
#playlist-autostart=1

# Pause on audio communication (boolean)
#playlist-cork=1

# Allow only one running instance (boolean)
#one-instance=0

# Use only one instance when started from file manager (boolean)
#one-instance-when-started-from-file=1

# Enqueue items into playlist in one instance mode (boolean)
#playlist-enqueue=0

# Use media library (boolean)
#media-library=0

# Display playlist tree (boolean)
#playlist-tree=0

# Default stream (string)
#open=

# Automatically preparse files (boolean)
#auto-preparse=1

# Allow metadata network access (boolean)
metadata-network-access=1

# Services discovery modules (string)
#services-discovery=

# Run as daemon process (boolean)
#daemon=0

# Write process id to file (string)
#pidfile=

# Log to file (boolean)
#file-logging=0

# Log to syslog (boolean)
#syslog=0

# Show advanced options (boolean)
#advanced=0

# Interface interaction (boolean)
#interact=1

# Locally collect statistics (boolean)
#stats=1

# Interface module (string)
#intf=

# Extra interface modules (string)
#extraintf=

# Control interfaces (string)
#control=

# MouseWheel up-down axis Control (integer)
#hotkeys-mousewheel-mode=0

# Fullscreen (string)
#global-key-toggle-fullscreen=

# Fullscreen (string)
#key-toggle-fullscreen=f

# Exit fullscreen (string)
#global-key-leave-fullscreen=

# Exit fullscreen (string)
#key-leave-fullscreen=Esc

# Play/Pause (string)
#global-key-play-pause=

# Play/Pause (string)
#key-play-pause=Space	Media Play Pause

# Pause only (string)
#global-key-pause=

# Pause only (string)
#key-pause=Browser Stop

# Play only (string)
#global-key-play=

# Play only (string)
#key-play=Browser Refresh

# Faster (string)
#global-key-faster=

# Faster (string)
#key-faster=+

# Slower (string)
#global-key-slower=

# Slower (string)
#key-slower=-

# Normal rate (string)
#global-key-rate-normal=

# Normal rate (string)
#key-rate-normal==

# Faster (fine) (string)
#global-key-rate-faster-fine=

# Faster (fine) (string)
#key-rate-faster-fine=]

# Slower (fine) (string)
#global-key-rate-slower-fine=

# Slower (fine) (string)
#key-rate-slower-fine=[

# Next (string)
#global-key-next=

# Next (string)
#key-next=n	Media Next Track

# Previous (string)
#global-key-prev=

# Previous (string)
#key-prev=p	Media Prev Track

# Stop (string)
#global-key-stop=

# Stop (string)
#key-stop=s	Media Stop

# Position (string)
#global-key-position=

# Position (string)
#key-position=t

# Very short backwards jump (string)
#global-key-jump-extrashort=

# Very short backwards jump (string)
#key-jump-extrashort=Shift+Left

# Very short forward jump (string)
#global-key-jump+extrashort=

# Very short forward jump (string)
#key-jump+extrashort=Shift+Right

# Short backwards jump (string)
#global-key-jump-short=

# Short backwards jump (string)
#key-jump-short=Alt+Left

# Short forward jump (string)
#global-key-jump+short=

# Short forward jump (string)
#key-jump+short=Alt+Right

# Medium backwards jump (string)
#global-key-jump-medium=

# Medium backwards jump (string)
#key-jump-medium=Ctrl+Left

# Medium forward jump (string)
#global-key-jump+medium=

# Medium forward jump (string)
#key-jump+medium=Ctrl+Right

# Long backwards jump (string)
#global-key-jump-long=

# Long backwards jump (string)
#key-jump-long=Ctrl+Alt+Left

# Long forward jump (string)
#global-key-jump+long=

# Long forward jump (string)
#key-jump+long=Ctrl+Alt+Right

# Next frame (string)
#global-key-frame-next=

# Next frame (string)
#key-frame-next=e	Browser Next

# Activate (string)
#global-key-nav-activate=

# Activate (string)
#key-nav-activate=Enter

# Navigate up (string)
#global-key-nav-up=

# Navigate up (string)
#key-nav-up=Up

# Navigate down (string)
#global-key-nav-down=

# Navigate down (string)
#key-nav-down=Down

# Navigate left (string)
#global-key-nav-left=

# Navigate left (string)
#key-nav-left=Left

# Navigate right (string)
#global-key-nav-right=

# Navigate right (string)
#key-nav-right=Right

# Go to the DVD menu (string)
#global-key-disc-menu=

# Go to the DVD menu (string)
#key-disc-menu=Shift+m

# Select previous DVD title (string)
#global-key-title-prev=

# Select previous DVD title (string)
#key-title-prev=Shift+o

# Select next DVD title (string)
#global-key-title-next=

# Select next DVD title (string)
#key-title-next=Shift+b

# Select prev DVD chapter (string)
#global-key-chapter-prev=

# Select prev DVD chapter (string)
#key-chapter-prev=Shift+p

# Select next DVD chapter (string)
#global-key-chapter-next=

# Select next DVD chapter (string)
#key-chapter-next=Shift+n

# Quit (string)
#global-key-quit=

# Quit (string)
#key-quit=Ctrl+q

# Volume up (string)
#global-key-vol-up=

# Volume up (string)
#key-vol-up=Ctrl+Up	Volume Up

# Volume down (string)
#global-key-vol-down=

# Volume down (string)
#key-vol-down=Ctrl+Down	Volume Down

# Mute (string)
#global-key-vol-mute=

# Mute (string)
#key-vol-mute=m	Volume Mute

# Subtitle delay up (string)
#global-key-subdelay-up=

# Subtitle delay up (string)
#key-subdelay-up=h

# Subtitle delay down (string)
#global-key-subdelay-down=

# Subtitle delay down (string)
#key-subdelay-down=g

# Subtitle sync / bookmark audio timestamp (string)
#global-key-subsync-markaudio=

# Subtitle sync / bookmark audio timestamp (string)
#key-subsync-markaudio=Shift+h

# Subtitle sync / bookmark subtitle timestamp (string)
#global-key-subsync-marksub=

# Subtitle sync / bookmark subtitle timestamp (string)
#key-subsync-marksub=Shift+j

# Subtitle sync / synchronize audio & subtitle timestamps (string)
#global-key-subsync-apply=

# Subtitle sync / synchronize audio & subtitle timestamps (string)
#key-subsync-apply=Shift+k

# Subtitle sync / reset audio & subtitle synchronization (string)
#global-key-subsync-reset=

# Subtitle sync / reset audio & subtitle synchronization (string)
#key-subsync-reset=Ctrl+Shift+k

# Subtitle position up (string)
#global-key-subpos-up=

# Subtitle position up (string)
#key-subpos-up=

# Subtitle position down (string)
#global-key-subpos-down=

# Subtitle position down (string)
#key-subpos-down=

# Audio delay up (string)
#global-key-audiodelay-up=

# Audio delay up (string)
#key-audiodelay-up=k

# Audio delay down (string)
#global-key-audiodelay-down=

# Audio delay down (string)
#key-audiodelay-down=j

# Cycle audio track (string)
#global-key-audio-track=

# Cycle audio track (string)
#key-audio-track=b

# Cycle through audio devices (string)
#global-key-audiodevice-cycle=

# Cycle through audio devices (string)
#key-audiodevice-cycle=Shift+a

# Cycle subtitle track (string)
#global-key-subtitle-track=

# Cycle subtitle track (string)
#key-subtitle-track=v

# Toggle subtitles (string)
#global-key-subtitle-toggle=

# Toggle subtitles (string)
#key-subtitle-toggle=Shift+v

# Cycle next program Service ID (string)
#global-key-program-sid-next=

# Cycle next program Service ID (string)
#key-program-sid-next=x

# Cycle previous program Service ID (string)
#global-key-program-sid-prev=

# Cycle previous program Service ID (string)
#key-program-sid-prev=Shift+x

# Cycle source aspect ratio (string)
#global-key-aspect-ratio=

# Cycle source aspect ratio (string)
#key-aspect-ratio=a

# Cycle video crop (string)
#global-key-crop=

# Cycle video crop (string)
#key-crop=c

# Toggle autoscaling (string)
#global-key-toggle-autoscale=

# Toggle autoscaling (string)
#key-toggle-autoscale=o

# Increase scale factor (string)
#global-key-incr-scalefactor=

# Increase scale factor (string)
#key-incr-scalefactor=Alt+o

# Decrease scale factor (string)
#global-key-decr-scalefactor=

# Decrease scale factor (string)
#key-decr-scalefactor=Alt+Shift+o

# Toggle deinterlacing (string)
#global-key-deinterlace=

# Toggle deinterlacing (string)
#key-deinterlace=d

# Cycle deinterlace modes (string)
#global-key-deinterlace-mode=

# Cycle deinterlace modes (string)
#key-deinterlace-mode=Shift+d

# Show controller in fullscreen (string)
#global-key-intf-show=

# Show controller in fullscreen (string)
#key-intf-show=i

# Boss key (string)
#global-key-intf-boss=

# Boss key (string)
#key-intf-boss=

# Context menu (string)
#global-key-intf-popup-menu=

# Context menu (string)
#key-intf-popup-menu=Menu

# Take video snapshot (string)
#global-key-snapshot=

# Take video snapshot (string)
#key-snapshot=Shift+s

# Record (string)
#global-key-record=

# Record (string)
#key-record=Shift+r

# Zoom (string)
#global-key-zoom=

# Zoom (string)
#key-zoom=z

# Un-Zoom (string)
#global-key-unzoom=

# Un-Zoom (string)
#key-unzoom=Shift+z

# Toggle wallpaper mode in video output (string)
#global-key-wallpaper=

# Toggle wallpaper mode in video output (string)
#key-wallpaper=w

# Crop one pixel from the top of the video (string)
#global-key-crop-top=

# Crop one pixel from the top of the video (string)
#key-crop-top=Alt+r

# Uncrop one pixel from the top of the video (string)
#global-key-uncrop-top=

# Uncrop one pixel from the top of the video (string)
#key-uncrop-top=Alt+Shift+r

# Crop one pixel from the left of the video (string)
#global-key-crop-left=

# Crop one pixel from the left of the video (string)
#key-crop-left=Alt+d

# Uncrop one pixel from the left of the video (string)
#global-key-uncrop-left=

# Uncrop one pixel from the left of the video (string)
#key-uncrop-left=Alt+Shift+d

# Crop one pixel from the bottom of the video (string)
#global-key-crop-bottom=

# Crop one pixel from the bottom of the video (string)
#key-crop-bottom=Alt+c

# Uncrop one pixel from the bottom of the video (string)
#global-key-uncrop-bottom=

# Uncrop one pixel from the bottom of the video (string)
#key-uncrop-bottom=Alt+Shift+c

# Crop one pixel from the right of the video (string)
#global-key-crop-right=

# Crop one pixel from the right of the video (string)
#key-crop-right=Alt+f

# Uncrop one pixel from the right of the video (string)
#global-key-uncrop-right=

# Uncrop one pixel from the right of the video (string)
#key-uncrop-right=Alt+Shift+f

# Random (string)
#global-key-random=

# Random (string)
#key-random=r

# Normal/Loop/Repeat (string)
#global-key-loop=

# Normal/Loop/Repeat (string)
#key-loop=l

# 1:4 Quarter (string)
#global-key-zoom-quarter=

# 1:4 Quarter (string)
#key-zoom-quarter=Alt+1

# 1:2 Half (string)
#global-key-zoom-half=

# 1:2 Half (string)
#key-zoom-half=Alt+2

# 1:1 Original (string)
#global-key-zoom-original=

# 1:1 Original (string)
#key-zoom-original=Alt+3

# 2:1 Double (string)
#global-key-zoom-double=

# 2:1 Double (string)
#key-zoom-double=Alt+4

# Very short jump length (integer)
#extrashort-jump-size=3

# Short jump length (integer)
#short-jump-size=10

# Medium jump length (integer)
#medium-jump-size=60

# Long jump length (integer)
#long-jump-size=300

# Set playlist bookmark 1 (string)
#global-key-set-bookmark1=

# Set playlist bookmark 1 (string)
#key-set-bookmark1=Ctrl+F1

# Set playlist bookmark 2 (string)
#global-key-set-bookmark2=

# Set playlist bookmark 2 (string)
#key-set-bookmark2=Ctrl+F2

# Set playlist bookmark 3 (string)
#global-key-set-bookmark3=

# Set playlist bookmark 3 (string)
#key-set-bookmark3=Ctrl+F3

# Set playlist bookmark 4 (string)
#global-key-set-bookmark4=

# Set playlist bookmark 4 (string)
#key-set-bookmark4=Ctrl+F4

# Set playlist bookmark 5 (string)
#global-key-set-bookmark5=

# Set playlist bookmark 5 (string)
#key-set-bookmark5=Ctrl+F5

# Set playlist bookmark 6 (string)
#global-key-set-bookmark6=

# Set playlist bookmark 6 (string)
#key-set-bookmark6=Ctrl+F6

# Set playlist bookmark 7 (string)
#global-key-set-bookmark7=

# Set playlist bookmark 7 (string)
#key-set-bookmark7=Ctrl+F7

# Set playlist bookmark 8 (string)
#global-key-set-bookmark8=

# Set playlist bookmark 8 (string)
#key-set-bookmark8=Ctrl+F8

# Set playlist bookmark 9 (string)
#global-key-set-bookmark9=

# Set playlist bookmark 9 (string)
#key-set-bookmark9=Ctrl+F9

# Set playlist bookmark 10 (string)
#global-key-set-bookmark10=

# Set playlist bookmark 10 (string)
#key-set-bookmark10=Ctrl+F10

# Play playlist bookmark 1 (string)
#global-key-play-bookmark1=

# Play playlist bookmark 1 (string)
#key-play-bookmark1=F1

# Play playlist bookmark 2 (string)
#global-key-play-bookmark2=

# Play playlist bookmark 2 (string)
#key-play-bookmark2=F2

# Play playlist bookmark 3 (string)
#global-key-play-bookmark3=

# Play playlist bookmark 3 (string)
#key-play-bookmark3=F3

# Play playlist bookmark 4 (string)
#global-key-play-bookmark4=

# Play playlist bookmark 4 (string)
#key-play-bookmark4=F4

# Play playlist bookmark 5 (string)
#global-key-play-bookmark5=

# Play playlist bookmark 5 (string)
#key-play-bookmark5=F5

# Play playlist bookmark 6 (string)
#global-key-play-bookmark6=

# Play playlist bookmark 6 (string)
#key-play-bookmark6=F6

# Play playlist bookmark 7 (string)
#global-key-play-bookmark7=

# Play playlist bookmark 7 (string)
#key-play-bookmark7=F7

# Play playlist bookmark 8 (string)
#global-key-play-bookmark8=

# Play playlist bookmark 8 (string)
#key-play-bookmark8=F8

# Play playlist bookmark 9 (string)
#global-key-play-bookmark9=

# Play playlist bookmark 9 (string)
#key-play-bookmark9=F9

# Play playlist bookmark 10 (string)
#global-key-play-bookmark10=

# Play playlist bookmark 10 (string)
#key-play-bookmark10=F10

# Clear the playlist (string)
#global-key-clear-playlist=

# Clear the playlist (string)
#key-clear-playlist=Ctrl+w

# Playlist bookmark 1 (string)
#bookmark1=

# Playlist bookmark 2 (string)
#bookmark2=

# Playlist bookmark 3 (string)
#bookmark3=

# Playlist bookmark 4 (string)
#bookmark4=

# Playlist bookmark 5 (string)
#bookmark5=

# Playlist bookmark 6 (string)
#bookmark6=

# Playlist bookmark 7 (string)
#bookmark7=

# Playlist bookmark 8 (string)
#bookmark8=

# Playlist bookmark 9 (string)
#bookmark9=

# Playlist bookmark 10 (string)
#bookmark10=

Bon, il est vrai que je pourrai mettre ce fichier d'apparence (skin, peau) dans un dossier qui n'est pas caché... mais, cela ne résout pas le problème du non accès des dossiers cachés au travers VLC.

EDIT : ajout du lien vers le site VLC/skins

Dernière modification par lool_lauris (Le 28/01/2019, à 11:32)


Soutenez le Libre => http://www.april.org/

Hors ligne

#6 Le 28/01/2019, à 13:00

Toulibre

Re : Accéder aux dossiers cachés via VLC [RÉSOLU]

Bonjour ,

Essaies comme ceci

2019-01-28-13-00-15-979089-Sans-titre.png

Edit  : Oups smile Autant pour moi

Dernière modification par Toulibre (Le 28/01/2019, à 13:20)


Temps Libre  -  Lubuntu 18.04 LTSCréation WordPress  -  Passionné Photographie  -  Comment insérer une image sur le Forum  -  HP Pavilion DV7 i7-640m-8GO (Chauffe un peu)

Hors ligne

#7 Le 28/01/2019, à 13:19

moko138

Re : Accéder aux dossiers cachés via VLC [RÉSOLU]

As-tu bien fermé toutes tes fenêtres de vlc puis relancé vlc ?


Contrairement à ce que je pensais, la doc vlc dit de placer le "skin"
dans ~/.local/share/vlc/skins2  (Mais pour quelle version de vlc ?)
     À propos, montre

dpkg -l | grep "vlc "; snap list | grep vlc

  - -

Et si tu recoches "utiliser un style natif", n'as-tu pas une boîte de dialogue comparable à celle-ci (j'ai une vieille version) :
1548674360.jpg
et incluant ton nouveau style ?
  - -

Je crois que tu peux, après avoir fermé toutes tes fenêtres de vlc, imposer le chemin de ton nouveau style dans vlc-qt-interface.conf, à la ligne

QtStyle=

mais j'ignore sad la bonne syntaxe. J'imagine que ça commence par

QtStyle=/home/laurent/.local/share/vlc/skins2/

Et peut-être que ça suffit ?
Teste.
Et teste aussi :

QtStyle=/home/laurent/.local/share/vlc/skins2/ton-fichier-de-style

puisque tu sembles dire qu'il n'y a qu'un seul fichier.
  - -

  Plus simple, à tester en premier :
À la relecture, je suis presque sûr qu'il suffit :
- de coller
/home/laurent/.local/share/vlc/skins2/ton-fichier-de-style
dans le champ "Fichier d'habillage" qu'on voit bien sur ta capture,
- d'enregistrer,
- de fermer toutes tes fenêtres de vlc
- et enfin de relancer vlc.
smile


Et si ça ne suffit pas, montre :

ls -l ~/.local/share/vlc/skins2/

  - -

Contournement
Tu le dis toi-même :

je pourrai mettre ce fichier d'apparence (skin, peau) dans un dossier qui n'est pas caché

Et j'approuve d'autant plus que jamais je n'ai pu ouvrir un élément caché depuis quelque version de vlc que ce soit.


%NOINDEX%
Un utilitaire méconnu : ncdu

En ligne

#8 Le 28/01/2019, à 13:50

Toulibre

Re : Accéder aux dossiers cachés via VLC [RÉSOLU]

Du moment que le dossier n'est pas caché (temporairement) il est accessible

2019-01-28-13-48-59-870441-Sans-titre.png

Edit : Sens que je vais me faire passer un savon

Dernière modification par Toulibre (Le 28/01/2019, à 13:58)


Temps Libre  -  Lubuntu 18.04 LTSCréation WordPress  -  Passionné Photographie  -  Comment insérer une image sur le Forum  -  HP Pavilion DV7 i7-640m-8GO (Chauffe un peu)

Hors ligne

#9 Le 28/01/2019, à 14:11

melixgaro

Re : Accéder aux dossiers cachés via VLC [RÉSOLU]

Salut,

Je confirme les dires de moko. Les peaux doivent être dans

~/.local/share/vlc/skins2

Il faut avoir installé ce paquet aussi (extrait d'apt depuis une 18.10) :

$ apt show vlc-plugin-skins2
Package: vlc-plugin-skins2
Version: 3.0.4-2build1
Priority: optional
Section: universe/video
Source: vlc
Origin: Ubuntu
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Original-Maintainer: Debian Multimedia Maintainers <debian-multimedia@lists.debian.org>
Bugs: https://bugs.launchpad.net/ubuntu/+filebug
Installed-Size: 1228 kB
Depends: fonts-freefont-ttf, vlc-plugin-qt (= 3.0.4-2build1), libc6 (>= 2.27), libfreetype6 (>= 2.2.1), libfribidi0 (>= 0.19.2), libgcc1 (>= 1:3.0), libstdc++6 (>= 5.2), libvlccore9 (>= 3.0.4), libx11-6, libxext6, libxinerama1, libxpm4, vlc-plugin-abi-3-0-0f
Recommends: vlc-bin
Breaks: vlc (<< 3.0.0-1~), vlc-data (<< 3.0.0-1~)
Replaces: vlc (<< 3.0.0-1~), vlc-data (<< 3.0.0-1~)
Enhances: vlc
Homepage: https://www.videolan.org/vlc/
Task: kubuntu-desktop, kubuntu-full, lubuntu-desktop, ubuntu-mate-desktop
Download-Size: 458 kB
APT-Manual-Installed: yes
APT-Sources: http://fr.archive.ubuntu.com/ubuntu cosmic/universe amd64 Packages
Description: multimedia player and streamer (Skins2 plugin)
 VLC is the VideoLAN project's media player. It plays MPEG, MPEG-2, MPEG-4,
 DivX, MOV, WMV, QuickTime, WebM, FLAC, MP3, Ogg/Vorbis files, DVDs, VCDs,
 podcasts, and multimedia streams from various network sources.
 .
 This package contains VLC's Skins2 interface.

Si tu respectes les deux étapes ci-dessous et si tu as basculé en mode peau au lieu du mode natif, alors les différentes peaux disponible sur ton système devraient être trouvables via le menu déroulant (clique droit dans la fenêtre VLC -> interface -> Select skin).

Un grep sur l'aide donne quelques options pertinentes

$ vlc --full-help | grep -i skin
[…]
 Skinnable Interface (skins2)
      --skins2-last <string>     Skin to use
          Path to the skin to use.
      --skins2-config <string>   Config of last used skin
          Windows configuration of the last skin used. This option is updated
      --skins2-transparency, --no-skins2-transparency 
      --skinned-playlist, --no-skinned-playlist 
                                 Use a skinned playlist
          Use a skinned playlist
      --skinned-video, --no-skinned-video 
                                 Display video in a skinned window if any
          When set to 'no', this parameter is intended to give old skins a
[…]

Tu peux tenter depuis la ligne de commande avec

vlc -I skins2 --skins2-last=.local/share/vlc/skins2/redcoast.vlt

Linux depuis ~2007. Xubuntu seulement.

Hors ligne

#10 Le 28/01/2019, à 14:54

moko138

Re : Accéder aux dossiers cachés via VLC [RÉSOLU]

Ah la vache ! L'info que le paquet vlc-plugin-skins2 est nécessaire, elle était bien cachée, parce que j'avais consulté en vain cinq pages spécialisées de videolan.org (forum et wiki) !

Merci melixgaro !


%NOINDEX%
Un utilitaire méconnu : ncdu

En ligne

#11 Le 28/01/2019, à 15:06

melixgaro

Re : Accéder aux dossiers cachés via VLC [RÉSOLU]

Pareil, je n'ai vu ça sur aucun site consulté tout à l'heure. J'ai eu du bol en zyeutant dans les dépôts…


Linux depuis ~2007. Xubuntu seulement.

Hors ligne

#12 Le 28/01/2019, à 16:19

erresse

Re : Accéder aux dossiers cachés via VLC [RÉSOLU]

Bonjour,
Je n'ai pas d'idée sur l'utilisation des apparences spécifiques dans VLC, mais pour l'apparence standard, si je choisis dans le menu de VLC "Media -> Ouvrir un fichier" ou "Media -> Ouvrir un dossier...", dans la fenêtre qui s'affiche, je peux cliquer droit dans la liste et l'option "Afficher les fichiers cachés" est proposée.
Toutefois, cette option n'est pas proposée au clic droit dans la liste de lecture...


Plus de 50 ans d'informatique, ça en fait des lignes de commandes en console, mais on n'avait pas le choix...
Excellente raison pour, aujourd'hui qu'on le peut, utiliser au maximum les INTERFACES GRAPHIQUES !
Important : Une fois résolu, pensez à clore votre sujet en ajoutant [Résolu] devant le titre du 1er message, et un bref récapitulatif de la solution à la fin de celui-ci. Merci.

Hors ligne

#13 Le 28/01/2019, à 17:01

Toulibre

Re : Accéder aux dossiers cachés via VLC [RÉSOLU]

Ah oui erresse , effectivement , après avoir téléchargé le pack skins et crée le dossier skins2 dans .config/vlc je peux changer à loisir son apparence , merci smile


Temps Libre  -  Lubuntu 18.04 LTSCréation WordPress  -  Passionné Photographie  -  Comment insérer une image sur le Forum  -  HP Pavilion DV7 i7-640m-8GO (Chauffe un peu)

Hors ligne

#14 Le 28/01/2019, à 18:05

lool_lauris

Re : Accéder aux dossiers cachés via VLC [RÉSOLU]

Merci à tous pour vos réponses.
Effectivement, un clic droit dans l'interface permet d'afficher les dossiers cachés... je suis pratiquement sûr de l'avoir fait avant de poster mais sans succès !?
Bon, en tout cas, il semble bien que ce topic avait son utilité.
Merci.
Bye.


Soutenez le Libre => http://www.april.org/

Hors ligne