Pages : 1
#1 Le 28/02/2019, à 17:13
- ramonfeliu34@gmail.com
[Résolu] problème de connection wifi avec cles usb
bonjour
tout d'abord je suis assez novice avec ubuntu donc veuillez m'excuser si je n'emploie pas toujours les bons termes.
j'ai acheté une clé usb wifi "dual band USB Adapter AC1200"
je l'ai installée sur mon pc (type tour) en suivant les indications sur différents topics de ce forum :
https://github.com/cilynx/rtl88x2BU_WiF … 2-5044.git
cd rtl88x2BU_WiFi_linux_v5.3.1_27678.20180430_COEX20180427-5959
VER=$(sed -n 's/\PACKAGE_VERSION="\(.*\)"/\1/p' dkms.conf)
sudo rsync -rvhP ./ /usr/src/rtl88x2bu-${VER}
sudo dkms add -m rtl88x2bu -v ${VER}
sudo dkms build -m rtl88x2bu -v ${VER}
sudo dkms install -m rtl88x2bu -v ${VER}
sudo modprobe 88x2bu
tout s'est bien passé sans message d'erreur
j'active sur mon téléphone un point d'accès wifi mobile avec mot de passe en wpa2 psk
mon telphone donc mon wifi s'appelle FREDDY
sur ubuntu je vois bien en wi-fi mon téléphone que j'ai paramétré sur ubuntu avec le mot de passe en securité WPA et WPA2 privées il ne veut pas se connecter et me dit que je dois rentrer un mot de passe
je le fais mais ca ne veux pas se connecter
pour info avec un autre ordi portable pas de problème de connexion
j'ai fait des essais juste avec ma tour en wifi pour me connecter sans cable réseau ni l'odinateur portable pour qu'il n'y ait pas de conflit d'adresse ip
ci dessous toutes les infos sur ma configuration
si quelqu'un peux m'aider ! je ne m'en sors pas !
Merci
Ramon
$ cat /etc/lsb-release
DISTRIB_ID=Ubuntu
DISTRIB_RELEASE=18.04
DISTRIB_CODENAME=bionic
DISTRIB_DESCRIPTION="Ubuntu 18.04.2 LTS"
$ lsusb
Bus 002 Device 003: ID 0bda:b812 Realtek Semiconductor Corp.
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 008 Device 002: ID 046d:c534 Logitech, Inc. Unifying Receiver
Bus 008 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 013: ID 05c6:f00e Qualcomm, Inc.
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
$ lspci
00:00.0 Host bridge: Intel Corporation 82G33/G31/P35/P31 Express DRAM Controller (rev 02)
00:02.0 VGA compatible controller: Intel Corporation 82G33/G31 Express Integrated Graphics Controller (rev 02)
00:1a.0 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #4 (rev 02)
00:1a.1 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #5 (rev 02)
00:1a.2 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #6 (rev 02)
00:1a.7 USB controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #2 (rev 02)
00:1b.0 Audio device: Intel Corporation 82801I (ICH9 Family) HD Audio Controller (rev 02)
00:1c.0 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 1 (rev 02)
00:1c.4 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 5 (rev 02)
00:1c.5 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 6 (rev 02)
00:1d.0 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #1 (rev 02)
00:1d.1 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #2 (rev 02)
00:1d.2 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #3 (rev 02)
00:1d.7 USB controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #1 (rev 02)
00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev 92)
00:1f.0 ISA bridge: Intel Corporation 82801IB (ICH9) LPC Interface Controller (rev 02)
00:1f.2 IDE interface: Intel Corporation 82801IB (ICH9) 2 port SATA Controller [IDE mode] (rev 02)
00:1f.3 SMBus: Intel Corporation 82801I (ICH9 Family) SMBus Controller (rev 02)
00:1f.5 IDE interface: Intel Corporation 82801I (ICH9 Family) 2 port SATA Controller [IDE mode] (rev 02)
01:00.0 Ethernet controller: Marvell Technology Group Ltd. 88E8056 PCI-E Gigabit Ethernet Controller (rev 12)
02:00.0 IDE interface: JMicron Technology Corp. JMB368 IDE controller
04:02.0 FireWire (IEEE 1394): VIA Technologies, Inc. VT6306/7/8 [Fire II(M)] IEEE 1394 OHCI Controller (rev c0)
$ lspci -k -nn | grep -A 3 -i net
01:00.0 Ethernet controller [0200]: Marvell Technology Group Ltd. 88E8056 PCI-E Gigabit Ethernet Controller [11ab:4364] (rev 12)
Subsystem: ASUSTeK Computer Inc. Motherboard [1043:81f8]
Kernel driver in use: sky2
Kernel modules: sky2
$ lspci -k
00:00.0 Host bridge: Intel Corporation 82G33/G31/P35/P31 Express DRAM Controller (rev 02)
Subsystem: ASUSTeK Computer Inc. P5K PRO Motherboard: Intel 82P35 Northbridge
00:02.0 VGA compatible controller: Intel Corporation 82G33/G31 Express Integrated Graphics Controller (rev 02)
Subsystem: ASUSTeK Computer Inc. 82G33/G31 Express Integrated Graphics Controller
Kernel driver in use: i915
Kernel modules: i915
00:1a.0 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #4 (rev 02)
Subsystem: ASUSTeK Computer Inc. P5K PRO Motherboard: 82801IR [ICH9R]
Kernel driver in use: uhci_hcd
00:1a.1 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #5 (rev 02)
Subsystem: ASUSTeK Computer Inc. P5K PRO Motherboard: 82801IR [ICH9R]
Kernel driver in use: uhci_hcd
00:1a.2 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #6 (rev 02)
Subsystem: ASUSTeK Computer Inc. P5K PRO Motherboard: 82801IR [ICH9R]
Kernel driver in use: uhci_hcd
00:1a.7 USB controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #2 (rev 02)
Subsystem: ASUSTeK Computer Inc. P5K PRO Motherboard: 82801IR [ICH9R]
Kernel driver in use: ehci-pci
00:1b.0 Audio device: Intel Corporation 82801I (ICH9 Family) HD Audio Controller (rev 02)
Subsystem: ASUSTeK Computer Inc. 82801I (ICH9 Family) HD Audio Controller
Kernel driver in use: snd_hda_intel
Kernel modules: snd_hda_intel
00:1c.0 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 1 (rev 02)
Kernel driver in use: pcieport
Kernel modules: shpchp
00:1c.4 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 5 (rev 02)
Kernel driver in use: pcieport
Kernel modules: shpchp
00:1c.5 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 6 (rev 02)
Kernel driver in use: pcieport
Kernel modules: shpchp
00:1d.0 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #1 (rev 02)
Subsystem: ASUSTeK Computer Inc. P5K PRO Motherboard: 82801IR [ICH9R]
Kernel driver in use: uhci_hcd
00:1d.1 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #2 (rev 02)
Subsystem: ASUSTeK Computer Inc. P5K PRO Motherboard: 82801IR [ICH9R]
Kernel driver in use: uhci_hcd
00:1d.2 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #3 (rev 02)
Subsystem: ASUSTeK Computer Inc. P5K PRO Motherboard: 82801IR [ICH9R]
Kernel driver in use: uhci_hcd
00:1d.7 USB controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #1 (rev 02)
Subsystem: ASUSTeK Computer Inc. P5K PRO Motherboard: 82801IR [ICH9R]
Kernel driver in use: ehci-pci
00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev 92)
00:1f.0 ISA bridge: Intel Corporation 82801IB (ICH9) LPC Interface Controller (rev 02)
Subsystem: ASUSTeK Computer Inc. 82801IB (ICH9) LPC Interface Controller
Kernel driver in use: lpc_ich
Kernel modules: lpc_ich
00:1f.2 IDE interface: Intel Corporation 82801IB (ICH9) 2 port SATA Controller [IDE mode] (rev 02)
Subsystem: ASUSTeK Computer Inc. 82801IB (ICH9) 2 port SATA Controller [IDE mode]
Kernel driver in use: ata_piix
Kernel modules: pata_acpi
00:1f.3 SMBus: Intel Corporation 82801I (ICH9 Family) SMBus Controller (rev 02)
Subsystem: ASUSTeK Computer Inc. P5K PRO Motherboard: 82801IR [ICH9R]
Kernel modules: i2c_i801
00:1f.5 IDE interface: Intel Corporation 82801I (ICH9 Family) 2 port SATA Controller [IDE mode] (rev 02)
Subsystem: ASUSTeK Computer Inc. P5K PRO Motherboard: 82801IR [ICH9R]
Kernel driver in use: ata_piix
Kernel modules: pata_acpi
01:00.0 Ethernet controller: Marvell Technology Group Ltd. 88E8056 PCI-E Gigabit Ethernet Controller (rev 12)
Subsystem: ASUSTeK Computer Inc. Motherboard
Kernel driver in use: sky2
Kernel modules: sky2
02:00.0 IDE interface: JMicron Technology Corp. JMB368 IDE controller
Subsystem: ASUSTeK Computer Inc. JMB368 IDE controller
Kernel driver in use: pata_jmicron
Kernel modules: pata_jmicron, pata_acpi
04:02.0 FireWire (IEEE 1394): VIA Technologies, Inc. VT6306/7/8 [Fire II(M)] IEEE 1394 OHCI Controller (rev c0)
Subsystem: ASUSTeK Computer Inc. Motherboard
Kernel driver in use: firewire_ohci
Kernel modules: firewire_ohci
$ sudo lshw -C network
[sudo] Mot de passe de ramon :
*-network
description: Ethernet interface
produit: 88E8056 PCI-E Gigabit Ethernet Controller
fabriquant: Marvell Technology Group Ltd.
identifiant matériel: 0
information bus: pci@0000:01:00.0
nom logique: enp1s0
version: 12
numéro de série: 00:1e:8c:48:c0:eb
capacité: 1Gbit/s
bits: 64 bits
horloge: 33MHz
fonctionnalités: pm vpd msi pciexpress bus_master cap_list rom ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation
configuration: autonegotiation=on broadcast=yes driver=sky2 driverversion=1.30 latency=0 link=no multicast=yes port=twisted pair
ressources: irq:24 mémoire:feafc000-feafffff portE/S:c800(taille=256) mémoire:feac0000-feadffff
*-network:0
description: Ethernet interface
identifiant matériel: 1
nom logique: enp0s26f7u1
numéro de série: 36:c5:e0:a0:41:47
fonctionnalités: ethernet physical
configuration: broadcast=yes driver=rndis_host driverversion=22-Aug-2005 firmware=RNDIS device ip=192.168.42.158 link=yes multicast=yes
*-network:1
description: Interface réseau sans fil
identifiant matériel: 2
information bus: usb@2:6
nom logique: wlx000f005091fe
numéro de série: 00:0f:00:50:91:fe
fonctionnalités: ethernet physical wireless
configuration: broadcast=yes driver=rtl88x2bu multicast=yes wireless=unassociated
$ lsmod
Module Size Used by
btrfs 1077248 0
zstd_compress 151552 1 btrfs
xor 28672 1 btrfs
raid6_pq 106496 1 btrfs
ufs 73728 0
qnx4 16384 0
hfsplus 94208 0
hfs 53248 0
minix 32768 0
ntfs 98304 0
msdos 20480 0
jfs 176128 0
xfs 1069056 0
libcrc32c 16384 1 xfs
88x2bu 2035712 0
cfg80211 532480 1 88x2bu
joydev 20480 0
input_leds 16384 0
rndis_host 16384 0
cdc_ether 16384 1 rndis_host
usbnet 36864 2 rndis_host,cdc_ether
mii 16384 1 usbnet
gpio_ich 16384 0
snd_hda_codec_realtek 94208 1
snd_hda_codec_generic 69632 1 snd_hda_codec_realtek
snd_hda_intel 36864 8
snd_hda_codec 106496 3 snd_hda_intel,snd_hda_codec_generic,snd_hda_codec_realtek
snd_hda_core 65536 4 snd_hda_intel,snd_hda_codec,snd_hda_codec_generic,snd_hda_codec_realtek
coretemp 16384 0
snd_hwdep 16384 1 snd_hda_codec
snd_pcm 86016 4 snd_hda_intel,snd_hda_codec,snd_hda_core
kvm_intel 204800 0
kvm 520192 1 kvm_intel
snd_seq_midi 16384 0
snd_seq_midi_event 16384 1 snd_seq_midi
irqbypass 16384 1 kvm
snd_rawmidi 28672 1 snd_seq_midi
snd_seq 57344 2 snd_seq_midi_event,snd_seq_midi
serio_raw 16384 0
snd_seq_device 16384 3 snd_seq,snd_rawmidi,snd_seq_midi
snd_timer 28672 2 snd_seq,snd_pcm
lpc_ich 24576 0
snd 69632 25 snd_hda_intel,snd_hwdep,snd_seq,snd_hda_codec,snd_timer,snd_rawmidi,snd_hda_codec_generic,snd_seq_device,snd_hda_codec_realtek,snd_pcm
shpchp 32768 0
soundcore 16384 1 snd
asus_atk0110 20480 0
binfmt_misc 20480 1
mac_hid 16384 0
sch_fq_codel 20480 7
parport_pc 32768 1
ppdev 20480 0
lp 20480 0
parport 45056 3 lp,parport_pc,ppdev
ip_tables 20480 0
x_tables 28672 1 ip_tables
autofs4 40960 2
i915 1282048 6
hid_generic 16384 0
usbhid 49152 0
hid 98304 2 hid_generic,usbhid
video 40960 1 i915
i2c_algo_bit 16384 1 i915
drm_kms_helper 151552 1 i915
syscopyarea 16384 1 drm_kms_helper
sysfillrect 16384 1 drm_kms_helper
sysimgblt 16384 1 drm_kms_helper
firewire_ohci 36864 0
fb_sys_fops 16384 1 drm_kms_helper
firewire_core 57344 1 firewire_ohci
sky2 53248 0
pata_acpi 16384 0
drm 339968 8 i915,drm_kms_helper
crc_itu_t 16384 1 firewire_core
pata_jmicron 16384 0
floppy 61440 0
$ iwconfig
enp1s0 no wireless extensions.
enp0s26f7u1 no wireless extensions.
lo no wireless extensions.
wlx000f005091fe unassociated Nickname:"<WIFI@REALTEK>"
Mode:Managed Frequency=2.412 GHz Access Point: Not-Associated
Sensitivity:0/0
Retry:off RTS thr:off Fragment thr:off
Power Management:off
Link Quality:0 Signal level:0 Noise level:0
Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0
Tx excessive retries:0 Invalid misc:0 Missed beacon:0
$ ifconfig -a
enp0s26f7u1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500
inet 192.168.42.158 netmask 255.255.255.0 broadcast 192.168.42.255
ether 36:c5:e0:a0:41:47 txqueuelen 1000 (Ethernet)
RX packets 13451 bytes 11934916 (11.9 MB)
RX errors 1 dropped 0 overruns 0 frame 1
TX packets 10252 bytes 1652883 (1.6 MB)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
enp1s0: flags=4099<UP,BROADCAST,MULTICAST> mtu 1500
ether 00:1e:8c:48:c0:eb txqueuelen 1000 (Ethernet)
RX packets 0 bytes 0 (0.0 B)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 0 bytes 0 (0.0 B)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
device interrupt 17
lo: flags=73<UP,LOOPBACK,RUNNING> mtu 65536
inet 127.0.0.1 netmask 255.0.0.0
loop txqueuelen 1000 (Boucle locale)
RX packets 2751 bytes 264437 (264.4 KB)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 2751 bytes 264437 (264.4 KB)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
wlx000f005091fe: flags=4099<UP,BROADCAST,MULTICAST> mtu 1500
ether 00:0f:00:50:91:fe txqueuelen 1000 (Ethernet)
RX packets 0 bytes 0 (0.0 B)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 0 bytes 0 (0.0 B)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
$ sudo iwlist scan
enp1s0 Interface doesn't support scanning.
enp0s26f7u1 Interface doesn't support scanning.
lo Interface doesn't support scanning.
wlx000f005091fe Scan completed :
Cell 01 - Address: C0:C9:76:FE:A0:80
ESSID:"FREDDY"
Protocol:IEEE 802.11bgn
Mode:Master
Frequency:2.412 GHz (Channel 1)
Encryption key:on
Bit Rates:72 Mb/s
Extra:rsn_ie=30140100000fac040100000fac040100000fac020c00
IE: IEEE 802.11i/WPA2 Version 1
Group Cipher : CCMP
Pairwise Ciphers (1) : CCMP
Authentication Suites (1) : PSK
Quality=100/100 Signal level=65/100
Extra:fm=0001
$ uname -r -m
4.15.0-45-generic i686
$ cat /etc/network/interfaces
# interfaces(5) file used by ifup(8) and ifdown(8)
auto lo
iface lo inet loopback
$ nmcli
enp0s26f7u1: connecté to Connexion filaire 1
"Android"
ethernet (rndis_host), 36:C5:E0:A0:41:47, hw, mtu 1500
ip4 par défaut
inet4 192.168.42.158/24
route4 0.0.0.0/0
route4 192.168.42.0/24
route4 169.254.0.0/16
wlx000f005091fe: déconnecté
"Realtek 802.11ac NIC"
1 connexion disponible
wifi (rtl88x2bu), 00:0F:00:50:91:FE, hw, mtu 1500
enp1s0: indisponible
"Marvell 88E8056 PCI-E Gigabit Ethernet Controller (Motherboard)"
ethernet (sky2), 00:1E:8C:48:C0:EB, hw, mtu 1500
lo: non-géré
"lo"
loopback (unknown), 00:00:00:00:00:00, sw, mtu 65536
DNS configuration:
servers: 192.168.42.129
interface: enp0s26f7u1
$ sudo rfkill list
1: phy1: Wireless LAN
Soft blocked: no
Hard blocked: no
$ nmcli connection show
NAME UUID TYPE DEVICE
Connexion filaire 1 e9c79a29-9b92-3983-8303-09678030a837 ethernet enp0s26f7u
Connexion filaire 2 3a32bf6f-9987-3dc5-bae3-c69c28e4daf7 ethernet --
FREDDY 277b025d-624a-407d-a04a-a624455458c3 wifi --
Dernière modification par ramonfeliu34@gmail.com (Le 28/02/2019, à 17:27)
Hors ligne
#2 Le 28/02/2019, à 17:25
- ramonfeliu34@gmail.com
Re : [Résolu] problème de connection wifi avec cles usb
oups j'avais pas vu qu'il y avait un driver plus récent
https://github.com/cilynx/rtl88x2BU_WiF … 7-5959.git
je l'ai installé et redémarré et ça fonctionne
désolé pour mon message
Hors ligne
#3 Le 28/02/2019, à 17:28
- xubu1957
Re : [Résolu] problème de connection wifi avec cles usb
Bonjour,
Que retourne :
sudo modprobe 8822bu
?
_ _ _
Pour ajouter toi-même les balises code à ton précédent message #1 :
Cliquer sur le lien « Modifier » en bas à droite du message
Sélectionner le texte
Cliquer sur le <> de l'éditeur de message
comme indiqué dans le : Retour utilisable de commande
Conseils pour les nouveaux demandeurs et pas qu'eux
Important : Pensez à passer vos sujets en [Résolu] lorsque ceux-ci le sont, au début du titre en cliquant sur Modifier sous le premier message, et un bref récapitulatif de la solution à la fin de celui-ci. Merci. Membre de Linux-Azur
Hors ligne
#4 Le 28/02/2019, à 18:15
- cqfd93
Re : [Résolu] problème de connection wifi avec cles usb
Modération
Bonjour,
Pense à ajouter les balises code à ton message comme xubu1957 te l'a expliqué.
D'autre part, il n'est pas conseillé d'utiliser ton adresse email comme pseudo à moins que tu ne veuilles te retrouver inondé de spam ! Je te conseille d'aller sur cette discussion Changer son pseudo pour demander qu'on te le change.
− cqfd93 −
Hors ligne
Pages : 1