Compte-rendus smart durablement "inconsistent": problème ou non ??

Markorki · Le 26/07/2019, à 18:20

Bonjour,
J'ai eu un souci il y a quelque temps avec un post qui m'a valu à peu de choses près d'être traité de débile sur un autre sous-forum, problème de casse de système, je n'y reviens pas, sauf sur un point : on m'a reproché d'être irresponsable et de vivre dangereusement parce qu'un de mes disques (un WD "WDC WD20EFRX-68EUZN0") en était à >21000 erreurs , mais aussi à chaque compte-rendu rendait entre autres le message suivant :
"SMART overall-health self-assessment test result: PASSED"
et un peu plus loin :
"Warning: ATA error count 21nnn inconsistent with error log pointer 2/3"
(le 2/3 c'est parce que c'est en général le pointer 2, mais parfois le pointer 3)

J'ai effectivement continué à me servir de ce disque, pour voir, en faisant des sauvegardes fréquentes (je suis curieux et je ne m'offre pas 2To de disque tous les jours). Il en est maintenant à près de 46000 erreurs, et pas le moindre fichier perdu, juste parfois une I/o qui semble tarder à se terminer.

J'ai un peu googlé avec les mots-clés
"ATA error count inconsistent with error log pointer 2"
et même avec cette longue liste de mots-clés, on obtient pas mal de réponses: le problème semble répandu.

Un truc que je ne comprends pas, c'est le "inconsistent".
J'ai acheté en même temps 2 dd identiques, l'un me donne des erreurs (environ 46000) et parle d'inconsistence entre 2 mesures, l'autre ne parle pas d' "inconsisitence"
et ne présente que 13 erreurs, pour un nombre d'heures plus faible mais comparable (620 contre 760).

Ces pb peuvent-ils s'expliquer par des faux-contacts dans les cables SATA lors de la première utilisation, par exemple (car j'ai bien eu des bruits bizarres avec certains cables SATA trop raides), et sinon, ce pb, répandu, a-t-il une solution ?

trace smart du disque en défaut :

a2mains@PC-markorki:/home/marc$ sudo smartctl -s on -o on -a /dev/sdb
smartctl 6.6 2016-05-31 r4324 [x86_64-linux-4.15.0-54-generic] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Model Family:     Western Digital Red
Device Model:     WDC WD20EFRX-68EUZN0
Serial Number:    WD-WCC4M0974286
LU WWN Device Id: 5 0014ee 2b42f8804
Firmware Version: 80.00A80
User Capacity:    2000398934016 bytes [2,00 TB]
Sector Sizes:     512 bytes logical, 4096 bytes physical
Rotation Rate:    5400 rpm
Device is:        In smartctl database [for details use: -P show]
ATA Version is:   ACS-2 (minor revision not indicated)
SATA Version is:  SATA 3.0, 6.0 Gb/s (current: 3.0 Gb/s)
Local Time is:    Thu Jul 25 20:37:13 2019 CEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF ENABLE/DISABLE COMMANDS SECTION ===
SMART Enabled.
SMART Automatic Offline Testing Enabled every four hours.

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x82)	Offline data collection activity
					was completed without error.
					Auto Offline Data Collection: Enabled.
Self-test execution status:      (   0)	The previous self-test routine completed
					without error or no self-test has ever 
					been run.
Total time to complete Offline 
data collection: 		(28200) seconds.
Offline data collection
capabilities: 			 (0x7b) SMART execute Offline immediate.
					Auto Offline data collection on/off support.
					Suspend Offline collection upon new
					command.
					Offline surface scan supported.

trace smart du disque de même type, qui n'a pas de problème :

a2mains@PC-markorki:/home/marc$ sudo smartctl -s on -o on -a /dev/sdc
smartctl 6.6 2016-05-31 r4324 [x86_64-linux-4.15.0-54-generic] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Model Family:     Western Digital Red
Device Model:     WDC WD20EFRX-68EUZN0
Serial Number:    WD-WCC4M0970110
LU WWN Device Id: 5 0014ee 209847e62
Firmware Version: 80.00A80
User Capacity:    2000398934016 bytes [2,00 TB]
Sector Sizes:     512 bytes logical, 4096 bytes physical
Rotation Rate:    5400 rpm
Device is:        In smartctl database [for details use: -P show]
ATA Version is:   ACS-2 (minor revision not indicated)
SATA Version is:  SATA 3.0, 6.0 Gb/s (current: 3.0 Gb/s)
Local Time is:    Fri Jul 26 17:50:05 2019 CEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF ENABLE/DISABLE COMMANDS SECTION ===
SMART Enabled.
SMART Automatic Offline Testing Enabled every four hours.

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x82)	Offline data collection activity
					was completed without error.
					Auto Offline Data Collection: Enabled.
Self-test execution status:      (   0)	The previous self-test routine completed
					without error or no self-test has ever 
					been run.
Total time to complete Offline 
data collection: 		(26640) seconds.
Offline data collection
capabilities: 			 (0x7b) SMART execute Offline immediate.
					Auto Offline data collection on/off support.
					Suspend Offline collection upon new
					command.
					Offline surface scan supported.
					Self-test supported.
					Conveyance Self-test supported.
					Selective Self-test supported.
SMART capabilities:            (0x0003)	Saves SMART data before entering
					power-saving mode.
					Supports SMART auto save timer.
Error logging capability:        (0x01)	Error logging supported.
					General Purpose Logging supported.
Short self-test routine 
recommended polling time: 	 (   2) minutes.
Extended self-test routine
recommended polling time: 	 ( 269) minutes.
Conveyance self-test routine
recommended polling time: 	 (   5) minutes.
SCT capabilities: 	       (0x703d)	SCT Status supported.
					SCT Error Recovery Control supported.
					SCT Feature Control supported.
					SCT Data Table supported.

SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  1 Raw_Read_Error_Rate     0x002f   200   200   051    Pre-fail  Always       -       47
  3 Spin_Up_Time            0x0027   217   168   021    Pre-fail  Always       -       2125
  4 Start_Stop_Count        0x0032   099   099   000    Old_age   Always       -       1665
  5 Reallocated_Sector_Ct   0x0033   200   200   140    Pre-fail  Always       -       0
  7 Seek_Error_Rate         0x002e   200   200   000    Old_age   Always       -       0
  9 Power_On_Hours          0x0032   080   080   000    Old_age   Always       -       14975
 10 Spin_Retry_Count        0x0032   100   100   000    Old_age   Always       -       0
 11 Calibration_Retry_Count 0x0032   100   100   000    Old_age   Always       -       0
 12 Power_Cycle_Count       0x0032   099   099   000    Old_age   Always       -       1604
192 Power-Off_Retract_Count 0x0032   200   200   000    Old_age   Always       -       213
193 Load_Cycle_Count        0x0032   001   001   000    Old_age   Always       -       839357
194 Temperature_Celsius     0x0022   098   092   000    Old_age   Always       -       49
196 Reallocated_Event_Count 0x0032   200   200   000    Old_age   Always       -       0
197 Current_Pending_Sector  0x0032   200   200   000    Old_age   Always       -       0
198 Offline_Uncorrectable   0x0030   200   200   000    Old_age   Offline      -       0
199 UDMA_CRC_Error_Count    0x0032   200   200   000    Old_age   Always       -       0
200 Multi_Zone_Error_Rate   0x0008   200   200   000    Old_age   Offline      -       0

SMART Error Log Version: 1
ATA Error Count: 13 (device log contains only the most recent five errors)
	CR = Command Register [HEX]
	FR = Features Register [HEX]
	SC = Sector Count Register [HEX]
	SN = Sector Number Register [HEX]
	CL = Cylinder Low Register [HEX]
	CH = Cylinder High Register [HEX]
	DH = Device/Head Register [HEX]
	DC = Device Command Register [HEX]
	ER = Error register [HEX]
	ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.

Error 13 occurred at disk power-on lifetime: 14967 hours (623 days + 15 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  40 51 08 69 65 d6 e3  Error: UNC 8 sectors at LBA = 0x03d66569 = 64382313

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  c8 00 08 69 65 d6 e3 00      00:01:19.359  READ DMA
  b0 da 00 00 4f c2 00 00      00:01:03.251  SMART RETURN STATUS
  b0 d0 01 00 4f c2 00 00      00:01:03.248  SMART READ DATA
  b0 d1 01 00 4f c2 00 00      00:01:03.244  SMART READ ATTRIBUTE THRESHOLDS [OBS-4]
  ec 00 01 00 00 00 00 00      00:01:03.243  IDENTIFY DEVICE

Error 12 occurred at disk power-on lifetime: 14963 hours (623 days + 11 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  04 61 45 00 00 00 a0  Device Fault; Error: ABRT

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  ef 03 45 00 00 00 a0 00      03:18:18.911  SET FEATURES [Set transfer mode]
  ec 00 00 00 00 00 a0 00      03:18:18.850  IDENTIFY DEVICE
  ec 00 00 00 00 00 a0 00      03:18:13.520  IDENTIFY DEVICE
  ef 03 45 00 00 00 a0 00      03:18:13.518  SET FEATURES [Set transfer mode]

Error 11 occurred at disk power-on lifetime: 14963 hours (623 days + 11 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  04 61 45 00 00 00 a0  Device Fault; Error: ABRT

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  ef 03 45 00 00 00 a0 00      03:18:13.518  SET FEATURES [Set transfer mode]
  ec 00 00 00 00 00 a0 00      03:18:13.515  IDENTIFY DEVICE
  ec 00 00 00 00 00 a0 00      03:17:58.242  IDENTIFY DEVICE

Error 10 occurred at disk power-on lifetime: 14963 hours (623 days + 11 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  10 51 08 00 08 00 e0  Error: IDNF at LBA = 0x00000800 = 2048

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  ca 00 08 00 08 00 e0 00      03:12:09.640  WRITE DMA

Error 9 occurred at disk power-on lifetime: 14963 hours (623 days + 11 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  10 51 08 60 49 4f e0  Error: IDNF at LBA = 0x004f4960 = 5196128

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  ca 00 08 60 49 4f e0 00      03:09:32.732  WRITE DMA
  ec 00 00 00 00 00 a0 00      03:09:32.730  IDENTIFY DEVICE
  ef 03 45 00 00 00 a0 00      03:09:32.729  SET FEATURES [Set transfer mode]

SMART Self-test log structure revision number 1
No self-tests have been logged.  [To run self-tests, use: smartctl -t]

SMART Selective self-test log data structure revision number 1
 SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1        0        0  Not_testing
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
    5        0        0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.

a2mains@PC-markorki:/home/marc$ 
a2mains@PC-markorki:/home/marc$

geole · Le 26/07/2019, à 18:51

Bonjour
Pour le premier disque, tu as à peine donné le tiers du retour.

Pour le second disque, tu as donné la totalité,je relève les zones très intéressantes à consulter

ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  5 Reallocated_Sector_Ct   0x0033   200   200   140    Pre-fail  Always       -       0
  9 Power_On_Hours          0x0032   080   080   000    Old_age   Always       -       14975
197 Current_Pending_Sector  0x0032   200   200   000    Old_age   Always       -       0


SMART Error Log Version: 1
Error 13 occurred at disk power-on lifetime: 14967 hours (623 days + 15 hours)
  When the command that caused the error occurred, the device was active or idle.

Il a donc tous ses secteurs en bon état après 14975 heures de fonctionnement
Mais il y a eu dans le passé 13 erreurs. On ne conserve que les 5 dernières. La toute dernière datant de moins de 8 heures.
avec ce message disant qu'il y avait 8 secteurs illisibles (UNreCoverable) Error: UNC 8 sectors at LBA = 0x03d66569 = 64382313

Une précédante est plus inquiétante si le secteur 2048 est celui qui décrit la table de partition
Error 10 occurred at disk power-on lifetime: 14963 hours (623 days + 11 hours)
Error: IDNF at LBA = 0x00000800 = 2048
encore une autre
IDNF at LBA = 0x004f4960 = 5196128
Je vais retrouver ce que signifie IDNF
IDNF (ID Not Found): user-accessible address could not be found.
For READ LOG type commands, IDNF can also indicate that a device data log structure checksum was incorrect.

En toute logique tu devrais au moins lancer un test smartctl long pour trouver les secteurs en mauvais état afin de les éliminer.

Merci de poster la totalité du résultat smartctl du premier disque

Dernière modification par geole (Le 26/07/2019, à 18:59)

Markorki · Le 26/07/2019, à 18:57

Mes excuses pour la mauvaise copie du rapport smart du disque à pb.

a2mains@PC-markorki:/home/marc$ sudo smartctl -s on -o on -a /dev/sdb
smartctl 6.6 2016-05-31 r4324 [x86_64-linux-4.15.0-54-generic] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Model Family:     Western Digital Red
Device Model:     WDC WD20EFRX-68EUZN0
Serial Number:    WD-WCC4M0974286
LU WWN Device Id: 5 0014ee 2b42f8804
Firmware Version: 80.00A80
User Capacity:    2000398934016 bytes [2,00 TB]
Sector Sizes:     512 bytes logical, 4096 bytes physical
Rotation Rate:    5400 rpm
Device is:        In smartctl database [for details use: -P show]
ATA Version is:   ACS-2 (minor revision not indicated)
SATA Version is:  SATA 3.0, 6.0 Gb/s (current: 3.0 Gb/s)
Local Time is:    Thu Jul 25 20:37:13 2019 CEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF ENABLE/DISABLE COMMANDS SECTION ===
SMART Enabled.
SMART Automatic Offline Testing Enabled every four hours.

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x82)	Offline data collection activity
					was completed without error.
					Auto Offline Data Collection: Enabled.
Self-test execution status:      (   0)	The previous self-test routine completed
					without error or no self-test has ever 
					been run.
Total time to complete Offline 
data collection: 		(28200) seconds.
Offline data collection
capabilities: 			 (0x7b) SMART execute Offline immediate.
					Auto Offline data collection on/off support.
					Suspend Offline collection upon new
					command.
					Offline surface scan supported.
					Self-test supported.
					Conveyance Self-test supported.
					Selective Self-test supported.
SMART capabilities:            (0x0003)	Saves SMART data before entering
					power-saving mode.
					Supports SMART auto save timer.
Error logging capability:        (0x01)	Error logging supported.
					General Purpose Logging supported.
Short self-test routine 
recommended polling time: 	 (   2) minutes.
Extended self-test routine
recommended polling time: 	 ( 285) minutes.
Conveyance self-test routine
recommended polling time: 	 (   5) minutes.
SCT capabilities: 	       (0x703d)	SCT Status supported.
					SCT Error Recovery Control supported.
					SCT Feature Control supported.
					SCT Data Table supported.

SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  1 Raw_Read_Error_Rate     0x002f   200   200   051    Pre-fail  Always       -       0
  3 Spin_Up_Time            0x0027   216   165   021    Pre-fail  Always       -       2183
  4 Start_Stop_Count        0x0032   099   099   000    Old_age   Always       -       1968
  5 Reallocated_Sector_Ct   0x0033   200   200   140    Pre-fail  Always       -       0
  7 Seek_Error_Rate         0x002e   100   253   000    Old_age   Always       -       0
  9 Power_On_Hours          0x0032   075   075   000    Old_age   Always       -       18334
 10 Spin_Retry_Count        0x0032   100   100   000    Old_age   Always       -       0
 11 Calibration_Retry_Count 0x0032   100   100   000    Old_age   Always       -       0
 12 Power_Cycle_Count       0x0032   099   099   000    Old_age   Always       -       1968
192 Power-Off_Retract_Count 0x0032   200   200   000    Old_age   Always       -       296
193 Load_Cycle_Count        0x0032   141   141   000    Old_age   Always       -       178823
194 Temperature_Celsius     0x0022   101   096   000    Old_age   Always       -       46
196 Reallocated_Event_Count 0x0032   200   200   000    Old_age   Always       -       0
197 Current_Pending_Sector  0x0032   200   200   000    Old_age   Always       -       0
198 Offline_Uncorrectable   0x0030   200   200   000    Old_age   Offline      -       0
199 UDMA_CRC_Error_Count    0x0032   200   200   000    Old_age   Always       -       0
200 Multi_Zone_Error_Rate   0x0008   200   200   000    Old_age   Offline      -       0

SMART Error Log Version: 1
Warning: ATA error count 45916 inconsistent with error log pointer 2

ATA Error Count: 45916 (device log contains only the most recent five errors)
	CR = Command Register [HEX]
	FR = Features Register [HEX]
	SC = Sector Count Register [HEX]
	SN = Sector Number Register [HEX]
	CL = Cylinder Low Register [HEX]
	CH = Cylinder High Register [HEX]
	DH = Device/Head Register [HEX]
	DC = Device Command Register [HEX]
	ER = Error register [HEX]
	ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.

Error 45916 occurred at disk power-on lifetime: 18324 hours (763 days + 12 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  04 61 02 00 00 00 a0  Device Fault; Error: ABRT

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  ef 10 02 00 00 00 a0 08      00:13:33.227  SET FEATURES [Enable SATA feature]
  ec 00 00 00 00 00 a0 08      00:13:33.226  IDENTIFY DEVICE
  ef 03 46 00 00 00 a0 08      00:13:33.226  SET FEATURES [Set transfer mode]
  ef 10 02 00 00 00 a0 08      00:13:33.226  SET FEATURES [Enable SATA feature]
  ec 00 00 00 00 00 a0 08      00:13:33.225  IDENTIFY DEVICE

Error 45915 occurred at disk power-on lifetime: 18324 hours (763 days + 12 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  04 61 46 00 00 00 a0  Device Fault; Error: ABRT

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  ef 03 46 00 00 00 a0 08      00:13:33.226  SET FEATURES [Set transfer mode]
  ef 10 02 00 00 00 a0 08      00:13:33.226  SET FEATURES [Enable SATA feature]
  ec 00 00 00 00 00 a0 08      00:13:33.225  IDENTIFY DEVICE
  c8 00 08 00 10 59 ec 08      00:13:33.203  READ DMA
  ef 10 02 00 00 00 a0 08      00:13:33.203  SET FEATURES [Enable SATA feature]

Error 45914 occurred at disk power-on lifetime: 18324 hours (763 days + 12 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  04 61 02 00 00 00 a0  Device Fault; Error: ABRT

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  ef 10 02 00 00 00 a0 08      00:13:33.226  SET FEATURES [Enable SATA feature]
  ec 00 00 00 00 00 a0 08      00:13:33.225  IDENTIFY DEVICE
  c8 00 08 00 10 59 ec 08      00:13:33.203  READ DMA
  ef 10 02 00 00 00 a0 08      00:13:33.203  SET FEATURES [Enable SATA feature]
  ec 00 00 00 00 00 a0 08      00:13:33.202  IDENTIFY DEVICE

Error 45913 occurred at disk power-on lifetime: 18324 hours (763 days + 12 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  04 61 08 00 10 59 ec  Device Fault; Error: ABRT 8 sectors at LBA = 0x0c591000 = 207163392

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  c8 00 08 00 10 59 ec 08      00:13:33.203  READ DMA
  ef 10 02 00 00 00 a0 08      00:13:33.203  SET FEATURES [Enable SATA feature]
  ec 00 00 00 00 00 a0 08      00:13:33.202  IDENTIFY DEVICE
  ef 03 46 00 00 00 a0 08      00:13:33.202  SET FEATURES [Set transfer mode]
  ef 10 02 00 00 00 a0 08      00:13:33.202  SET FEATURES [Enable SATA feature]

Error 45912 occurred at disk power-on lifetime: 18324 hours (763 days + 12 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  04 61 02 00 00 00 a0  Device Fault; Error: ABRT

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  ef 10 02 00 00 00 a0 08      00:13:33.203  SET FEATURES [Enable SATA feature]
  ec 00 00 00 00 00 a0 08      00:13:33.202  IDENTIFY DEVICE
  ef 03 46 00 00 00 a0 08      00:13:33.202  SET FEATURES [Set transfer mode]
  ef 10 02 00 00 00 a0 08      00:13:33.202  SET FEATURES [Enable SATA feature]
  ec 00 00 00 00 00 a0 08      00:13:33.201  IDENTIFY DEVICE

SMART Self-test log structure revision number 1
No self-tests have been logged.  [To run self-tests, use: smartctl -t]

SMART Selective self-test log data structure revision number 1
 SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1        0        0  Not_testing
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
    5        0        0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.

a2mains@PC-markorki:/home/marc$

un smartctl long, c'est avec l'option -a ?

Dernière modification par Markorki (Le 26/07/2019, à 19:02)

geole · Le 26/07/2019, à 19:21

Pour la suite

ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  5 Reallocated_Sector_Ct   0x0033   200   200   140    Pre-fail  Always       -       0
  9 Power_On_Hours          0x0032   075   075   000    Old_age   Always       -       18334
197 Current_Pending_Sector  0x0032   200   200   000    Old_age   Always       -       0

SMART Error Log Version: 1
Error 45916 occurred at disk power-on lifetime: 18324 hours (763 days + 12 hours)  Error: ABRT
Error 45915 occurred at disk power-on lifetime: 18324 hours (763 days + 12 hours)  Error: ABRT
Error 45914 occurred at disk power-on lifetime: 18324 hours (763 days + 12 hours)  ; Error: ABRT
Error 45913 occurred at disk power-on lifetime: 18324 hours (763 days + 12 hours)   Error: ABRT 8 sectors at LBA = 0x0c591000 = 207163392

Cela vient donc de se produire il y a 10 heures , La cause est ABoRTed. Je ne sais pas ce que cela cache
Là aussi un test long serait le bienvenu.

sudo smartctl -t long  /dev/sdb

Cela peut se faire simultanément avec l'autre

sudo smartctl -t long  /dev/sdc

Dernière modification par geole (Le 26/07/2019, à 19:23)

Markorki · Le 26/07/2019, à 19:58

OK, les deux sont lancés.

Lancés à quelques secondes d'intervalle, ils finissent décalés de 16mn :
00h23 pour sdc , 0h39 pour sdb ; curieux !

geole · Le 26/07/2019, à 21:59

Je pense que cette discussion ( https://smartmontools-support.narkive.c … error-abrt ) est dans le vrai en disant

The Error Register states the definition for ABRT is:
Bit 2 - ABRT (command aborted) is set to one to indicate the requested command has been command aborted because the command code or a command parameter is invalid, the command is not supported, a prerequisite for the command has not been met, or some other error has occurred.

L'idée serait donc que tu utilises un logiciel pas au point qui veut accéder à ce disque. Il faudrait donc que tu réfléchisses à un logiciel qui accède à ce disque et pas à l'autre disque.

Dernière modification par geole (Le 26/07/2019, à 22:00)

Markorki · Le 27/07/2019, à 00:51

Arrêt des 2 tests longs :

a2mains@PC-markorki:/home/marc$ sudo smartctl -X /dev/sdc
[sudo] Mot de passe de a2mains : 
smartctl 6.6 2016-05-31 r4324 [x86_64-linux-4.15.0-54-generic] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF OFFLINE IMMEDIATE AND SELF-TEST SECTION ===
Sending command: "Abort SMART off-line mode self-test routine".
Self-testing aborted!
a2mains@PC-markorki:/home/marc$

a2mains@PC-markorki:/home/marc$ sudo smartctl -X /dev/sdb
smartctl 6.6 2016-05-31 r4324 [x86_64-linux-4.15.0-54-generic] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF OFFLINE IMMEDIATE AND SELF-TEST SECTION ===
Sending command: "Abort SMART off-line mode self-test routine".
Self-testing aborted!
a2mains@PC-markorki:/home/marc$

Hum il n'y a pas grand chose dans ces sorties. il y a sûrement qq chose que je n'ai pas bien fait ?

Merci, je réfléchis à ce que je peux faire sur sdb que je ne fais pas sur sdc, mais je ne vois pas pour le moment.

Dernière modification par Markorki (Le 27/07/2019, à 00:52)

geole · Le 27/07/2019, à 11:17

Bonjour
Refais un smartctl pour les deux disques.
Dedans on y trouvera l'erreur détectée par le test. On essayera de réparer.

Markorki · Le 27/07/2019, à 11:34

bonjour, petite surprise ce matin :

Depuis quelque temps, je boote ce pc , qui a je crois une carte-mère asustek , en tapant F8 au démarrage pour avoir le "boot menu", c'est-à-dire la liste des dispositifs bootables, et je choisis le premier WD 2To dans la liste, où s'exécute grub (si j'ai tout compris).

Surprise ce matin : à la première tentative de boot, je tape F8, aucun des 2 Wd 2To ne figure dans la liste. Affolement...
Je reset, les 2 dd sont présents, et je peux donc passer à la liste grub, ouf !

pb hard de 2 dd à la fois ? Faut-il soupçonner l'alim ? Le BIOS ? Ma machine a 9 ans , je vais changer la pile et reparamétrer le setup, sachant que l'alim est toujours "on" à l'arrière de mon desktop, ce qui est censé maintenir le setup tant qu'on ne débranche pas la prise... et que le secteur ne disjoncte pas (2 fois ces 2 derniers mois).

Pour ce qui est du soft accédant à sdb et pas à sdc :

Ma machine a 3 ubuntu installés : une 18-04 "chargée" avec presque toutes les applis que j'utilise, une 16-04 avec peu d'applis, que je garde parce que l'interface de hugin plus ancien est plus commode que celui de la 18-04 , et une 18-04 installée récemment pour éviter la lenteur des sessions "live" parce que le fsck de la 16-04 refusait de traiter le file-system root de la 18-04 "lourde" qui est en ext4 ("fonction non supportée, trouver version plus récente de e2fsck")

Sur sdb (disque à problème), il y a / et /home de la 18-04 chargée (de référence pour moi) et 2 partitions de données.
Sur sdc (disque sans pb) il y a / et /home de la 16-04 et 2 partitions de données.
Ces 2 lignes sont peut-être fausses, j'ai un pb de changement de nom des dd dans gparted par rapport à hier...

Je crois qu'il faut essayer d'éviter de parle de sda sdb sdc ? Dès qu'un dd n'est plus visible , tout change dans gparted par exemple. Alors on fait comment ? (je panique)

J'ajoute, vu la possibilité de pb hard, que j'ai passé l'intérieur de ce pc à l'aspirateur à la mi-juin environ.

Dernière modification par Markorki (Le 27/07/2019, à 11:35)

geole · Le 27/07/2019, à 12:45

Si tu as des disques qui disparaissent, c'est un peu inquiétant. S'ils reviennent tant mieux.
On va donc les appeler par leur nom. Pour trouver les noms, il faut faire la commande

ls   -ls   /dev/disk/by-id

Cela sera à trouver dans la liste et va ressembler à
ata-TOSHIBA_MQ01ABD100_339KP439T -> ../../sda
wwn-0x50000394a2b021d3 -> ../../sda

La commande smartctl devient alors au choix

sudo smartctl    -a  /dev/disk/by-id/ata-TOSHIBA_MQ01ABD100_339KP439T

ou

sudo smartctl    -a  /dev/disk/by-id/wwn-0x50000394a2b021d3

Comme tu le dis si bien, il y a format EXT4 et EXT4!!!!
"parce que le fsck de la 16-04 refusait de traiter le file-system root de la 18-04 "lourde" qui est en ext4 ("fonction non supportée, trouver version plus récente de e2fsck") "

Dernière modification par geole (Le 27/07/2019, à 12:49)

Markorki · Le 27/07/2019, à 13:17

Le disque suspect est donc /dev/disk/by-id/ata-WDC_WD20EFRX-68EUZN0_WD-WCC4M0974286
et donc son smartctl indépendant du boot peut s'écrire comme-ça :

sudo smartctl -s on -o on -a /dev/disk/by-id/ata-WDC_WD20EFRX-68EUZN0_WD-WCC4M0974286

on obtient bien le dd qui présente près de 46000 erreurs

a2mains@PC-markorki:/home/marc$ sudo smartctl -s on -o on -a /dev/disk/by-id/ata-WDC_WD20EFRX-68EUZN0_WD-WCC4M0974286
smartctl 6.6 2016-05-31 r4324 [x86_64-linux-4.15.0-54-generic] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Model Family:     Western Digital Red
Device Model:     WDC WD20EFRX-68EUZN0
Serial Number:    WD-WCC4M0974286
LU WWN Device Id: 5 0014ee 2b42f8804
Firmware Version: 80.00A80
User Capacity:    2000398934016 bytes [2,00 TB]
Sector Sizes:     512 bytes logical, 4096 bytes physical
Rotation Rate:    5400 rpm
Device is:        In smartctl database [for details use: -P show]
ATA Version is:   ACS-2 (minor revision not indicated)
SATA Version is:  SATA 3.0, 6.0 Gb/s (current: 3.0 Gb/s)
Local Time is:    Sat Jul 27 13:07:17 2019 CEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF ENABLE/DISABLE COMMANDS SECTION ===
SMART Enabled.
SMART Automatic Offline Testing Enabled every four hours.

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x82)	Offline data collection activity
					was completed without error.
					Auto Offline Data Collection: Enabled.
Self-test execution status:      (   0)	The previous self-test routine completed
					without error or no self-test has ever 
					been run.
Total time to complete Offline 
data collection: 		(28200) seconds.
Offline data collection
capabilities: 			 (0x7b) SMART execute Offline immediate.
					Auto Offline data collection on/off support.
					Suspend Offline collection upon new
					command.
					Offline surface scan supported.
					Self-test supported.
					Conveyance Self-test supported.
					Selective Self-test supported.
SMART capabilities:            (0x0003)	Saves SMART data before entering
					power-saving mode.
					Supports SMART auto save timer.
Error logging capability:        (0x01)	Error logging supported.
					General Purpose Logging supported.
Short self-test routine 
recommended polling time: 	 (   2) minutes.
Extended self-test routine
recommended polling time: 	 ( 285) minutes.
Conveyance self-test routine
recommended polling time: 	 (   5) minutes.
SCT capabilities: 	       (0x703d)	SCT Status supported.
					SCT Error Recovery Control supported.
					SCT Feature Control supported.
					SCT Data Table supported.

SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  1 Raw_Read_Error_Rate     0x002f   200   200   051    Pre-fail  Always       -       0
  3 Spin_Up_Time            0x0027   215   165   021    Pre-fail  Always       -       2216
  4 Start_Stop_Count        0x0032   099   099   000    Old_age   Always       -       1972
  5 Reallocated_Sector_Ct   0x0033   200   200   140    Pre-fail  Always       -       0
  7 Seek_Error_Rate         0x002e   200   200   000    Old_age   Always       -       0
  9 Power_On_Hours          0x0032   075   075   000    Old_age   Always       -       18357
 10 Spin_Retry_Count        0x0032   100   100   000    Old_age   Always       -       0
 11 Calibration_Retry_Count 0x0032   100   100   000    Old_age   Always       -       0
 12 Power_Cycle_Count       0x0032   099   099   000    Old_age   Always       -       1972
192 Power-Off_Retract_Count 0x0032   200   200   000    Old_age   Always       -       298
193 Load_Cycle_Count        0x0032   141   141   000    Old_age   Always       -       179027
194 Temperature_Celsius     0x0022   104   095   000    Old_age   Always       -       43
196 Reallocated_Event_Count 0x0032   200   200   000    Old_age   Always       -       0
197 Current_Pending_Sector  0x0032   200   200   000    Old_age   Always       -       0
198 Offline_Uncorrectable   0x0030   200   200   000    Old_age   Offline      -       0
199 UDMA_CRC_Error_Count    0x0032   200   200   000    Old_age   Always       -       0
200 Multi_Zone_Error_Rate   0x0008   200   200   000    Old_age   Offline      -       0

SMART Error Log Version: 1
Warning: ATA error count 45916 inconsistent with error log pointer 2

ATA Error Count: 45916 (device log contains only the most recent five errors)
	CR = Command Register [HEX]
	FR = Features Register [HEX]
	SC = Sector Count Register [HEX]
	SN = Sector Number Register [HEX]
	CL = Cylinder Low Register [HEX]
	CH = Cylinder High Register [HEX]
	DH = Device/Head Register [HEX]
	DC = Device Command Register [HEX]
	ER = Error register [HEX]
	ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.

Error 45916 occurred at disk power-on lifetime: 18324 hours (763 days + 12 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  04 61 02 00 00 00 a0  Device Fault; Error: ABRT

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  ef 10 02 00 00 00 a0 08      00:13:33.227  SET FEATURES [Enable SATA feature]
  ec 00 00 00 00 00 a0 08      00:13:33.226  IDENTIFY DEVICE
  ef 03 46 00 00 00 a0 08      00:13:33.226  SET FEATURES [Set transfer mode]
  ef 10 02 00 00 00 a0 08      00:13:33.226  SET FEATURES [Enable SATA feature]
  ec 00 00 00 00 00 a0 08      00:13:33.225  IDENTIFY DEVICE

Error 45915 occurred at disk power-on lifetime: 18324 hours (763 days + 12 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  04 61 46 00 00 00 a0  Device Fault; Error: ABRT

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  ef 03 46 00 00 00 a0 08      00:13:33.226  SET FEATURES [Set transfer mode]
  ef 10 02 00 00 00 a0 08      00:13:33.226  SET FEATURES [Enable SATA feature]
  ec 00 00 00 00 00 a0 08      00:13:33.225  IDENTIFY DEVICE
  c8 00 08 00 10 59 ec 08      00:13:33.203  READ DMA
  ef 10 02 00 00 00 a0 08      00:13:33.203  SET FEATURES [Enable SATA feature]

Error 45914 occurred at disk power-on lifetime: 18324 hours (763 days + 12 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  04 61 02 00 00 00 a0  Device Fault; Error: ABRT

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  ef 10 02 00 00 00 a0 08      00:13:33.226  SET FEATURES [Enable SATA feature]
  ec 00 00 00 00 00 a0 08      00:13:33.225  IDENTIFY DEVICE
  c8 00 08 00 10 59 ec 08      00:13:33.203  READ DMA
  ef 10 02 00 00 00 a0 08      00:13:33.203  SET FEATURES [Enable SATA feature]
  ec 00 00 00 00 00 a0 08      00:13:33.202  IDENTIFY DEVICE

Error 45913 occurred at disk power-on lifetime: 18324 hours (763 days + 12 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  04 61 08 00 10 59 ec  Device Fault; Error: ABRT 8 sectors at LBA = 0x0c591000 = 207163392

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  c8 00 08 00 10 59 ec 08      00:13:33.203  READ DMA
  ef 10 02 00 00 00 a0 08      00:13:33.203  SET FEATURES [Enable SATA feature]
  ec 00 00 00 00 00 a0 08      00:13:33.202  IDENTIFY DEVICE
  ef 03 46 00 00 00 a0 08      00:13:33.202  SET FEATURES [Set transfer mode]
  ef 10 02 00 00 00 a0 08      00:13:33.202  SET FEATURES [Enable SATA feature]

Error 45912 occurred at disk power-on lifetime: 18324 hours (763 days + 12 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  04 61 02 00 00 00 a0  Device Fault; Error: ABRT

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  ef 10 02 00 00 00 a0 08      00:13:33.203  SET FEATURES [Enable SATA feature]
  ec 00 00 00 00 00 a0 08      00:13:33.202  IDENTIFY DEVICE
  ef 03 46 00 00 00 a0 08      00:13:33.202  SET FEATURES [Set transfer mode]
  ef 10 02 00 00 00 a0 08      00:13:33.202  SET FEATURES [Enable SATA feature]
  ec 00 00 00 00 00 a0 08      00:13:33.201  IDENTIFY DEVICE

SMART Self-test log structure revision number 1
Num  Test_Description    Status                  Remaining  LifeTime(hours)  LBA_of_first_error
# 1  Extended offline    Interrupted (host reset)      60%     18348         -

SMART Selective self-test log data structure revision number 1
 SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1        0        0  Not_testing
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
    5        0        0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.

a2mains@PC-markorki:/home/marc$

Le test long a-t-il apporté quelque chose ? Je lance aussi pour le dd sans pb..

Dernière modification par Markorki (Le 27/07/2019, à 13:18)

Markorki · Le 27/07/2019, à 13:29

idem pour le disque à peu d'erreurs :

a2mains@PC-markorki:/home/marc$ sudo smartctl -a /dev/disk/by-id/ata-WDC_WD20EFRX-68EUZN0_WD-WCC4M0970110
smartctl 6.6 2016-05-31 r4324 [x86_64-linux-4.15.0-54-generic] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Model Family:     Western Digital Red
Device Model:     WDC WD20EFRX-68EUZN0
Serial Number:    WD-WCC4M0970110
LU WWN Device Id: 5 0014ee 209847e62
Firmware Version: 80.00A80
User Capacity:    2000398934016 bytes [2,00 TB]
Sector Sizes:     512 bytes logical, 4096 bytes physical
Rotation Rate:    5400 rpm
Device is:        In smartctl database [for details use: -P show]
ATA Version is:   ACS-2 (minor revision not indicated)
SATA Version is:  SATA 3.0, 6.0 Gb/s (current: 3.0 Gb/s)
Local Time is:    Sat Jul 27 13:25:52 2019 CEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x82)	Offline data collection activity
					was completed without error.
					Auto Offline Data Collection: Enabled.
Self-test execution status:      (   0)	The previous self-test routine completed
					without error or no self-test has ever 
					been run.
Total time to complete Offline 
data collection: 		(26640) seconds.
Offline data collection
capabilities: 			 (0x7b) SMART execute Offline immediate.
					Auto Offline data collection on/off support.
					Suspend Offline collection upon new
					command.
					Offline surface scan supported.
					Self-test supported.
					Conveyance Self-test supported.
					Selective Self-test supported.
SMART capabilities:            (0x0003)	Saves SMART data before entering
					power-saving mode.
					Supports SMART auto save timer.
Error logging capability:        (0x01)	Error logging supported.
					General Purpose Logging supported.
Short self-test routine 
recommended polling time: 	 (   2) minutes.
Extended self-test routine
recommended polling time: 	 ( 269) minutes.
Conveyance self-test routine
recommended polling time: 	 (   5) minutes.
SCT capabilities: 	       (0x703d)	SCT Status supported.
					SCT Error Recovery Control supported.
					SCT Feature Control supported.
					SCT Data Table supported.

SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  1 Raw_Read_Error_Rate     0x002f   200   200   051    Pre-fail  Always       -       47
  3 Spin_Up_Time            0x0027   217   168   021    Pre-fail  Always       -       2150
  4 Start_Stop_Count        0x0032   099   099   000    Old_age   Always       -       1668
  5 Reallocated_Sector_Ct   0x0033   200   200   140    Pre-fail  Always       -       0
  7 Seek_Error_Rate         0x002e   200   200   000    Old_age   Always       -       1
  9 Power_On_Hours          0x0032   080   080   000    Old_age   Always       -       14988
 10 Spin_Retry_Count        0x0032   100   100   000    Old_age   Always       -       0
 11 Calibration_Retry_Count 0x0032   100   100   000    Old_age   Always       -       0
 12 Power_Cycle_Count       0x0032   099   099   000    Old_age   Always       -       1607
192 Power-Off_Retract_Count 0x0032   200   200   000    Old_age   Always       -       215
193 Load_Cycle_Count        0x0032   001   001   000    Old_age   Always       -       839445
194 Temperature_Celsius     0x0022   101   092   000    Old_age   Always       -       46
196 Reallocated_Event_Count 0x0032   200   200   000    Old_age   Always       -       0
197 Current_Pending_Sector  0x0032   200   200   000    Old_age   Always       -       0
198 Offline_Uncorrectable   0x0030   200   200   000    Old_age   Offline      -       0
199 UDMA_CRC_Error_Count    0x0032   200   200   000    Old_age   Always       -       0
200 Multi_Zone_Error_Rate   0x0008   200   200   000    Old_age   Offline      -       0

SMART Error Log Version: 1
ATA Error Count: 23 (device log contains only the most recent five errors)
	CR = Command Register [HEX]
	FR = Features Register [HEX]
	SC = Sector Count Register [HEX]
	SN = Sector Number Register [HEX]
	CL = Cylinder Low Register [HEX]
	CH = Cylinder High Register [HEX]
	DH = Device/Head Register [HEX]
	DC = Device Command Register [HEX]
	ER = Error register [HEX]
	ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.

Error 23 occurred at disk power-on lifetime: 14987 hours (624 days + 11 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  04 61 45 00 00 00 a0  Device Fault; Error: ABRT

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  ef 03 45 00 00 00 a0 00      00:48:31.662  SET FEATURES [Set transfer mode]
  ec 00 00 00 00 00 a0 00      00:48:31.601  IDENTIFY DEVICE
  ec 00 00 00 00 00 a0 00      00:48:26.339  IDENTIFY DEVICE
  ef 03 45 00 00 00 a0 00      00:48:26.337  SET FEATURES [Set transfer mode]
  ec 00 00 00 00 00 a0 00      00:48:26.334  IDENTIFY DEVICE

Error 22 occurred at disk power-on lifetime: 14987 hours (624 days + 11 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  04 61 45 00 00 00 a0  Device Fault; Error: ABRT

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  ef 03 45 00 00 00 a0 00      00:48:26.337  SET FEATURES [Set transfer mode]
  ec 00 00 00 00 00 a0 00      00:48:26.334  IDENTIFY DEVICE
  ec 00 00 00 00 00 a0 00      00:48:26.171  IDENTIFY DEVICE
  ef 03 45 00 00 00 a0 00      00:48:26.169  SET FEATURES [Set transfer mode]

Error 21 occurred at disk power-on lifetime: 14987 hours (624 days + 11 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  04 61 45 00 00 00 a0  Device Fault; Error: ABRT

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  ef 03 45 00 00 00 a0 00      00:48:26.169  SET FEATURES [Set transfer mode]
  ec 00 00 00 00 00 a0 00      00:48:26.166  IDENTIFY DEVICE

Error 20 occurred at disk power-on lifetime: 14986 hours (624 days + 10 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  40 51 20 60 ef 8c e0  Error: UNC 32 sectors at LBA = 0x008cef60 = 9236320

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  c8 00 20 60 ef 8c e0 00      00:12:23.930  READ DMA
  c8 00 88 68 4d 61 e1 00      00:12:14.959  READ DMA

Error 19 occurred at disk power-on lifetime: 14986 hours (624 days + 10 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  40 51 20 98 ea 8c e0  Error: UNC 32 sectors at LBA = 0x008cea98 = 9235096

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  c8 00 20 98 ea 8c e0 00      00:07:49.808  READ DMA

SMART Self-test log structure revision number 1
Num  Test_Description    Status                  Remaining  LifeTime(hours)  LBA_of_first_error
# 1  Extended offline    Interrupted (host reset)      90%     14977         -

SMART Selective self-test log data structure revision number 1
 SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1        0        0  Not_testing
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
    5        0        0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.

a2mains@PC-markorki:/home/marc$

reste à comparer...

geole · Le 27/07/2019, à 16:02

Je n'avais pas fait attention aux commandes que tu avais fait.
sudo smartctl -X /dev/sdc

En les lisant j'avais cru à un petit x
-x, --xall
Show all information for device

Ce n'est qu'en en faisant un copier/coller que je vois que c'est un grand X
-X, --abort
Abort any non-captive test on device

C'est donc normal que cela s'arrête. En plus ce n'était pas encore hors limite
Pour l'un des disques on voit que cela tournait pas vite du tout et pas en conformité avec le planning

Num  Test_Description    Status                  Remaining  LifeTime(hours)  LBA_of_first_error
# 1  Extended offline    Interrupted (host reset)      90%     14977

et pour l'autre nettement moins lentement

Num  Test_Description    Status                  Remaining  LifeTime(hours)  LBA_of_first_error
# 1  Extended offline    Interrupted (host reset)      60%     18348         -

Mais je ne suis pas certain que la prédiction soit une science exacte
Cependant une telle différance ne me semble pas normale

Si je compare les deux disques

Model Family:     Western Digital Red
Device Model:     WDC WD20EFRX-68EUZN0
Serial Number:    WD-WCC4M0970110
LU WWN Device Id: 5 0014ee 209847e62
Firmware Version: 80.00A80
User Capacity:    2000398934016 bytes [2,00 TB]
Sector Sizes:     512 bytes logical, 4096 bytes physical
Rotation Rate:    5400 rpm

et

Model Family:     Western Digital Red
Device Model:     WDC WD20EFRX-68EUZN0
Serial Number:    WD-WCC4M0974286
LU WWN Device Id: 5 0014ee 2b42f8804
Firmware Version: 80.00A80
User Capacity:    2000398934016 bytes [2,00 TB]
Sector Sizes:     512 bytes logical, 4096 bytes physical
Rotation Rate:    5400 rpm

C'est le même modèle et le même firmware. Ils devraient avoir un comportement identique sauf si le fait de les faire tourner en même temps faisait que le logiciel en favorisait un au détriment de l'autre
Je te propose de continuer les tests en en faisant un seul à la fois.
Je ne connais la commande. j'espère que c'est celle-ci

sudo smartctl -t   pending,1  /dev/disk/by-id/ata-WDC_WD20EFRX-68EUZN0_WD-WCC4M0974286

puis après

sudo smartctl   -t  pending,1   /dev/disk/by-id/ata-WDC_WD20EFRX-68EUZN0_WD-WCC4M0970110

Dernière modification par geole (Le 27/07/2019, à 16:04)

Markorki · Le 27/07/2019, à 16:27

Excuse moi, j'ai bêtement suivi le conseil donné par la commande (use -X option to abort)
Aïe, ça proteste :

a2mains@PC-markorki:/home/marc$ sudo smartctl -t   pending,1  /dev/disk/by-id/ata-WDC_WD20EFRX-68EUZN0_WD-WCC4M0974286
[sudo] Mot de passe de a2mains : 
smartctl 6.6 2016-05-31 r4324 [x86_64-linux-4.15.0-54-generic] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org


ERROR: smartctl -t pending,N must be used with -t select,N-M.

Use smartctl -h to get a usage summary

a2mains@PC-markorki:/home/marc$

même punition exactement pour les 2

Je consulte le man à tout hasard, pas sûr d'y comprendre assez ;-(

Markorki · Le 27/07/2019, à 16:38

Une idée comme-ça :
Si on était sûr de pouvoir tuer les deux smartctl en cours, peut-être qu'on pourrait les lancer dans l'ordre inverse, pour voir si ce n'est pas simplement le premier lancé qui est avantagé (ressources communes par exemple ?)

geole · Le 27/07/2019, à 17:09

Je n'ai pas réussi a trouver comment repartir

Je propose donc cette codification

les disques ayant 2000398934016 bytes, cela fait 3907029168 lba

L'un en a fait 10% soit donc 390702916 lba on arrondit un peu 390700000
L'autre en a fait 40% soit donc 1562811667 lba on arrondit un peu 156280000

 sudo   smartctl -t  select,156280000-max   /dev/disk/by-id/ata-WDC_WD20EFRX-68EUZN0_WD-WCC4M0974286

  sudo  smartctl -t  select,390700000-max   /dev/disk/by-id/ata-WDC_WD20EFRX-68EUZN0_WD-WCC4M0970110

Comme cela on aura déjà la codification pour plus tard

Je préfère que tu fasses en premier celui qui a le plus avancé. et laisser l'autre tourner pendant la nuit. Mais c'est c'est toi qui choisis la priorité.

Dernière modification par geole (Le 27/07/2019, à 17:27)

Markorki · Le 27/07/2019, à 17:30

Ok, je viens de lancer celui-ci :

a2mains@PC-markorki:/home/marc$ sudo  smartctl -t  select,156280000-max   /dev/disk/by-id/ata-WDC_WD20EFRX-68EUZN0_WD-WCC4M0974286
[sudo] Mot de passe de a2mains : 
smartctl 6.6 2016-05-31 r4324 [x86_64-linux-4.15.0-54-generic] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF OFFLINE IMMEDIATE AND SELF-TEST SECTION ===
Sending command: "Execute SMART Selective self-test routine immediately in off-line mode".
SPAN         STARTING_LBA           ENDING_LBA
   0            156280000           3907029167
Drive command "Execute SMART Selective self-test routine immediately in off-line mode" successful.
Testing has begun.
a2mains@PC-markorki:/home/marc$

Comment sait-on que cette commande est terminée ?
Je peux lancer l'autre cette nuit, je suis un peu couche-tard, et il n'y a pas de gros orage pour le moment. (hier j'ai eu un peu peur d'un arrêt prématuré du secteur).

geole · Le 27/07/2019, à 18:45

Si j'ai bien compris, cette technique tourne en automome. Tu peux même arrêter l'ordinateur. Lorque l'ordinateur repartira, le test continuera.

De temps en temps, tu feras

sudo smartctl -l  selftest  /dev/disk/by-id/ata-WDC_WD20EFRX-68EUZN0_WD-WCC4M0974286

Tu auras quelque chose de ce style lorsque cela sera fini.

smartctl 6.6 2016-05-31 r4324 [x86_64-linux-4.15.0-55-generic] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF READ SMART DATA SECTION ===
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Selective offline Completed without error 00% 19348 -
# 2 Selective offline Completed without error 00% 19347 -
# 3 Selective offline Completed without error 00% 19347 -
# 4 Selective offline Completed without error 00% 19347 -
# 5 Selective offline Completed without error 00% 19347 -

Lorsque cela sera en cours , la ligne en gras sera différente et indiquera le pourcentage restant
Lorsque le test sera stoppé, la ligne en gras sera différente et indiquera le pourcentage restant ainsi que la première erreur de lecture de LBA

Lorsque cela sera fini ou stoppé, je préfère alors que tu redonnes la vision totale

sudo smartctl  -a  /dev/disk/by-id/ata-WDC_WD20EFRX-68EUZN0_WD-WCC4M0974286

Tu as pris une sage décision "(hier j'ai eu un peu peur d'un arrêt prématuré du secteur)."
Ce qui m'as permis de proposer une nouvelle méthode . Je vais regarder si elle est dans la documentation.
mon test a été fait en cinq tranches..

sudo smartctl -t  select,156280000-156300000 -t select,256280000-256300000   -t select,356280000-356300000 -t select,456280000-456300000 -t  select,556280000-556300000  /dev/sda

Je ne sais pas si cela tourne en simultané.

Dernière modification par geole (Le 27/07/2019, à 18:53)

Markorki · Le 27/07/2019, à 22:25

Il y a un problème :

il est 22h15 environ, J'ai fait 3 fois la même commande, le test est arrêté, je ne sais pas comment le relancer

a2mains@PC-markorki:/home/marc$ 
a2mains@PC-markorki:/home/marc$ 
a2mains@PC-markorki:/home/marc$ sudo smartctl -l  selftest  /dev/disk/by-id/ata-WDC_WD20EFRX-68EUZN0_WD-WCC4M0974286
[sudo] Mot de passe de a2mains : 
smartctl 6.6 2016-05-31 r4324 [x86_64-linux-4.15.0-54-generic] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF READ SMART DATA SECTION ===
SMART Self-test log structure revision number 1
Num  Test_Description    Status                  Remaining  LifeTime(hours)  LBA_of_first_error
# 1  Extended offline    Interrupted (host reset)      60%     18348         -

a2mains@PC-markorki:/home/marc$

J'ai 3 fois la même sortie.
Comment relancer le test et consulter son progrès sans l'arrêter ?

Markorki · Le 28/07/2019, à 09:37

Ce matin, vers 9h30 (l'heure n'apparait pas dans le texte de sortie ):

a2mains@PC-markorki:/home/marc$ sudo smartctl -l  selftest  /dev/disk/by-id/ata-WDC_WD20EFRX-68EUZN0_WD-WCC4M0974286
[sudo] Mot de passe de a2mains : 
smartctl 6.6 2016-05-31 r4324 [x86_64-linux-4.15.0-54-generic] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF READ SMART DATA SECTION ===
SMART Self-test log structure revision number 1
Num  Test_Description    Status                  Remaining  LifeTime(hours)  LBA_of_first_error
# 1  Selective offline   Completed without error       00%     18366         -
# 2  Extended offline    Interrupted (host reset)      60%     18348         -

a2mains@PC-markorki:/home/marc$

4286 : c'est bien le dd aux presque 46000 erreurs.

Dernière modification par Markorki (Le 28/07/2019, à 09:44)

geole · Le 28/07/2019, à 12:21

Bonjour
A priori, le 'très mauvais disque" a parfaitement subit les tests de qualité. Ce qui confirme que la cause des 46.000 erreurs est en amont. Je ne sais pas comment faire pour la trouver. Cela risque de prendre du temps avant que je te propose une piste car google n'avait pas été très bavard sur ce seul problème.
Cela serait bien de redonner la totalité des compteurs après ce test

sudo smartctl  -a  /dev/disk/by-id/ata-WDC_WD20EFRX-68EUZN0_WD-WCC4M0974286

Pour l'autre disque, je te propose de donner le retour de ces commandes

sudo smartctl  -l error     /dev/disk/by-id/ata-WDC_WD20EFRX-68EUZN0_WD-WCC4M0970110

sudo smartctl  -a  /dev/disk/by-id/ata-WDC_WD20EFRX-68EUZN0_WD-WCC4M0970110

Puis malgré tout de continuer le test
La commande avait été
sudo smartctl -t select,390700000-max /dev/disk/by-id/ata-WDC_WD20EFRX-68EUZN0_WD-WCC4M0970110
La réponse avait été
SPAN STARTING_LBA ENDING_LBA
0 156280000 3907029167
puis
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Extended offline Interrupted (host reset) 60% 18348 -

Avec ma règle de trois arrondie, 156280000 + (3907029167-156280000) *0.04 cela donne cette commande

sudo  smartctl -t  select,1656500000-max   /dev/disk/by-id/ata-WDC_WD20EFRX-68EUZN0_WD-WCC4M0970110

Markorki · Le 28/07/2019, à 13:19

Voici le résultat de la première commande : on est toujours à 45916 erreurs

a2mains@PC-markorki:/home/marc$ 
a2mains@PC-markorki:/home/marc$ sudo smartctl  -a  /dev/disk/by-id/ata-WDC_WD20EFRX-68EUZN0_WD-WCC4M0974286
smartctl 6.6 2016-05-31 r4324 [x86_64-linux-4.15.0-54-generic] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Model Family:     Western Digital Red
Device Model:     WDC WD20EFRX-68EUZN0
Serial Number:    WD-WCC4M0974286
LU WWN Device Id: 5 0014ee 2b42f8804
Firmware Version: 80.00A80
User Capacity:    2000398934016 bytes [2,00 TB]
Sector Sizes:     512 bytes logical, 4096 bytes physical
Rotation Rate:    5400 rpm
Device is:        In smartctl database [for details use: -P show]
ATA Version is:   ACS-2 (minor revision not indicated)
SATA Version is:  SATA 3.0, 6.0 Gb/s (current: 3.0 Gb/s)
Local Time is:    Sun Jul 28 13:06:06 2019 CEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x82)	Offline data collection activity
					was completed without error.
					Auto Offline Data Collection: Enabled.
Self-test execution status:      (   0)	The previous self-test routine completed
					without error or no self-test has ever 
					been run.
Total time to complete Offline 
data collection: 		(28200) seconds.
Offline data collection
capabilities: 			 (0x7b) SMART execute Offline immediate.
					Auto Offline data collection on/off support.
					Suspend Offline collection upon new
					command.
					Offline surface scan supported.
					Self-test supported.
					Conveyance Self-test supported.
					Selective Self-test supported.
SMART capabilities:            (0x0003)	Saves SMART data before entering
					power-saving mode.
					Supports SMART auto save timer.
Error logging capability:        (0x01)	Error logging supported.
					General Purpose Logging supported.
Short self-test routine 
recommended polling time: 	 (   2) minutes.
Extended self-test routine
recommended polling time: 	 ( 285) minutes.
Conveyance self-test routine
recommended polling time: 	 (   5) minutes.
SCT capabilities: 	       (0x703d)	SCT Status supported.
					SCT Error Recovery Control supported.
					SCT Feature Control supported.
					SCT Data Table supported.

SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  1 Raw_Read_Error_Rate     0x002f   200   200   051    Pre-fail  Always       -       0
  3 Spin_Up_Time            0x0027   193   165   021    Pre-fail  Always       -       3333
  4 Start_Stop_Count        0x0032   099   099   000    Old_age   Always       -       1974
  5 Reallocated_Sector_Ct   0x0033   200   200   140    Pre-fail  Always       -       0
  7 Seek_Error_Rate         0x002e   200   200   000    Old_age   Always       -       0
  9 Power_On_Hours          0x0032   075   075   000    Old_age   Always       -       18372
 10 Spin_Retry_Count        0x0032   100   100   000    Old_age   Always       -       0
 11 Calibration_Retry_Count 0x0032   100   100   000    Old_age   Always       -       0
 12 Power_Cycle_Count       0x0032   099   099   000    Old_age   Always       -       1974
192 Power-Off_Retract_Count 0x0032   200   200   000    Old_age   Always       -       298
193 Load_Cycle_Count        0x0032   141   141   000    Old_age   Always       -       179172
194 Temperature_Celsius     0x0022   105   095   000    Old_age   Always       -       42
196 Reallocated_Event_Count 0x0032   200   200   000    Old_age   Always       -       0
197 Current_Pending_Sector  0x0032   200   200   000    Old_age   Always       -       0
198 Offline_Uncorrectable   0x0030   200   200   000    Old_age   Offline      -       0
199 UDMA_CRC_Error_Count    0x0032   200   200   000    Old_age   Always       -       0
200 Multi_Zone_Error_Rate   0x0008   200   200   000    Old_age   Offline      -       0

SMART Error Log Version: 1
Warning: ATA error count 45916 inconsistent with error log pointer 2

ATA Error Count: 45916 (device log contains only the most recent five errors)
	CR = Command Register [HEX]
	FR = Features Register [HEX]
	SC = Sector Count Register [HEX]
	SN = Sector Number Register [HEX]
	CL = Cylinder Low Register [HEX]
	CH = Cylinder High Register [HEX]
	DH = Device/Head Register [HEX]
	DC = Device Command Register [HEX]
	ER = Error register [HEX]
	ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.

Error 45916 occurred at disk power-on lifetime: 18324 hours (763 days + 12 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  04 61 02 00 00 00 a0  Device Fault; Error: ABRT

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  ef 10 02 00 00 00 a0 08      00:13:33.227  SET FEATURES [Enable SATA feature]
  ec 00 00 00 00 00 a0 08      00:13:33.226  IDENTIFY DEVICE
  ef 03 46 00 00 00 a0 08      00:13:33.226  SET FEATURES [Set transfer mode]
  ef 10 02 00 00 00 a0 08      00:13:33.226  SET FEATURES [Enable SATA feature]
  ec 00 00 00 00 00 a0 08      00:13:33.225  IDENTIFY DEVICE

Error 45915 occurred at disk power-on lifetime: 18324 hours (763 days + 12 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  04 61 46 00 00 00 a0  Device Fault; Error: ABRT

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  ef 03 46 00 00 00 a0 08      00:13:33.226  SET FEATURES [Set transfer mode]
  ef 10 02 00 00 00 a0 08      00:13:33.226  SET FEATURES [Enable SATA feature]
  ec 00 00 00 00 00 a0 08      00:13:33.225  IDENTIFY DEVICE
  c8 00 08 00 10 59 ec 08      00:13:33.203  READ DMA
  ef 10 02 00 00 00 a0 08      00:13:33.203  SET FEATURES [Enable SATA feature]

Error 45914 occurred at disk power-on lifetime: 18324 hours (763 days + 12 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  04 61 02 00 00 00 a0  Device Fault; Error: ABRT

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  ef 10 02 00 00 00 a0 08      00:13:33.226  SET FEATURES [Enable SATA feature]
  ec 00 00 00 00 00 a0 08      00:13:33.225  IDENTIFY DEVICE
  c8 00 08 00 10 59 ec 08      00:13:33.203  READ DMA
  ef 10 02 00 00 00 a0 08      00:13:33.203  SET FEATURES [Enable SATA feature]
  ec 00 00 00 00 00 a0 08      00:13:33.202  IDENTIFY DEVICE

Error 45913 occurred at disk power-on lifetime: 18324 hours (763 days + 12 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  04 61 08 00 10 59 ec  Device Fault; Error: ABRT 8 sectors at LBA = 0x0c591000 = 207163392

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  c8 00 08 00 10 59 ec 08      00:13:33.203  READ DMA
  ef 10 02 00 00 00 a0 08      00:13:33.203  SET FEATURES [Enable SATA feature]
  ec 00 00 00 00 00 a0 08      00:13:33.202  IDENTIFY DEVICE
  ef 03 46 00 00 00 a0 08      00:13:33.202  SET FEATURES [Set transfer mode]
  ef 10 02 00 00 00 a0 08      00:13:33.202  SET FEATURES [Enable SATA feature]

Error 45912 occurred at disk power-on lifetime: 18324 hours (763 days + 12 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  04 61 02 00 00 00 a0  Device Fault; Error: ABRT

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  ef 10 02 00 00 00 a0 08      00:13:33.203  SET FEATURES [Enable SATA feature]
  ec 00 00 00 00 00 a0 08      00:13:33.202  IDENTIFY DEVICE
  ef 03 46 00 00 00 a0 08      00:13:33.202  SET FEATURES [Set transfer mode]
  ef 10 02 00 00 00 a0 08      00:13:33.202  SET FEATURES [Enable SATA feature]
  ec 00 00 00 00 00 a0 08      00:13:33.201  IDENTIFY DEVICE

SMART Self-test log structure revision number 1
Num  Test_Description    Status                  Remaining  LifeTime(hours)  LBA_of_first_error
# 1  Selective offline   Completed without error       00%     18366         -
# 2  Extended offline    Interrupted (host reset)      60%     18348         -

SMART Selective self-test log data structure revision number 1
 SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1        0        0  Not_testing
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
    5        0        0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.

a2mains@PC-markorki:/home/marc$

Pour le "bon" disque :

a2mains@PC-markorki:/home/marc$ 
a2mains@PC-markorki:/home/marc$ sudo smartctl  -l error     /dev/disk/by-id/ata-WDC_WD20EFRX-68EUZN0_WD-WCC4M0970110
smartctl 6.6 2016-05-31 r4324 [x86_64-linux-4.15.0-54-generic] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF READ SMART DATA SECTION ===
SMART Error Log Version: 1
ATA Error Count: 41 (device log contains only the most recent five errors)
	CR = Command Register [HEX]
	FR = Features Register [HEX]
	SC = Sector Count Register [HEX]
	SN = Sector Number Register [HEX]
	CL = Cylinder Low Register [HEX]
	CH = Cylinder High Register [HEX]
	DH = Device/Head Register [HEX]
	DC = Device Command Register [HEX]
	ER = Error register [HEX]
	ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.

Error 41 occurred at disk power-on lifetime: 14990 hours (624 days + 14 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  10 51 08 58 08 40 e0  Error: IDNF at LBA = 0x00400858 = 4196440

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  ca 00 08 58 08 40 e0 00      03:21:17.337  WRITE DMA

Error 40 occurred at disk power-on lifetime: 14990 hours (624 days + 14 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  40 51 08 48 c6 cc e0  Error: UNC 8 sectors at LBA = 0x00ccc648 = 13420104

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  c8 00 08 48 c6 cc e0 00      03:20:34.611  READ DMA

Error 39 occurred at disk power-on lifetime: 14990 hours (624 days + 14 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  10 51 10 98 21 80 e0  Error: IDNF at LBA = 0x00802198 = 8397208

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  ca 00 10 98 21 80 e0 00      02:59:00.438  WRITE DMA
  ec 00 00 00 00 00 a0 00      02:59:00.435  IDENTIFY DEVICE
  ef 03 45 00 00 00 a0 00      02:59:00.435  SET FEATURES [Set transfer mode]

Error 38 occurred at disk power-on lifetime: 14990 hours (624 days + 14 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  10 51 10 98 21 80 e0  Error: IDNF at LBA = 0x00802198 = 8397208

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  ca 00 10 98 21 80 e0 00      02:58:53.420  WRITE DMA
  ec 00 00 00 00 00 a0 00      02:58:53.417  IDENTIFY DEVICE
  ef 03 45 00 00 00 a0 00      02:58:53.417  SET FEATURES [Set transfer mode]

Error 37 occurred at disk power-on lifetime: 14990 hours (624 days + 14 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  10 51 10 98 21 80 e0  Error: IDNF at LBA = 0x00802198 = 8397208

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  ca 00 10 98 21 80 e0 00      02:58:46.391  WRITE DMA
  ec 00 00 00 00 00 a0 00      02:58:46.388  IDENTIFY DEVICE
  ef 03 45 00 00 00 a0 00      02:58:46.388  SET FEATURES [Set transfer mode]

a2mains@PC-markorki:/home/marc$

et le -a :

a2mains@PC-markorki:/home/marc$ 
a2mains@PC-markorki:/home/marc$ sudo smartctl  -a  /dev/disk/by-id/ata-WDC_WD20EFRX-68EUZN0_WD-WCC4M0970110
smartctl 6.6 2016-05-31 r4324 [x86_64-linux-4.15.0-54-generic] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Model Family:     Western Digital Red
Device Model:     WDC WD20EFRX-68EUZN0
Serial Number:    WD-WCC4M0970110
LU WWN Device Id: 5 0014ee 209847e62
Firmware Version: 80.00A80
User Capacity:    2000398934016 bytes [2,00 TB]
Sector Sizes:     512 bytes logical, 4096 bytes physical
Rotation Rate:    5400 rpm
Device is:        In smartctl database [for details use: -P show]
ATA Version is:   ACS-2 (minor revision not indicated)
SATA Version is:  SATA 3.0, 6.0 Gb/s (current: 3.0 Gb/s)
Local Time is:    Sun Jul 28 13:18:41 2019 CEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x82)	Offline data collection activity
					was completed without error.
					Auto Offline Data Collection: Enabled.
Self-test execution status:      (   0)	The previous self-test routine completed
					without error or no self-test has ever 
					been run.
Total time to complete Offline 
data collection: 		(26640) seconds.
Offline data collection
capabilities: 			 (0x7b) SMART execute Offline immediate.
					Auto Offline data collection on/off support.
					Suspend Offline collection upon new
					command.
					Offline surface scan supported.
					Self-test supported.
					Conveyance Self-test supported.
					Selective Self-test supported.
SMART capabilities:            (0x0003)	Saves SMART data before entering
					power-saving mode.
					Supports SMART auto save timer.
Error logging capability:        (0x01)	Error logging supported.
					General Purpose Logging supported.
Short self-test routine 
recommended polling time: 	 (   2) minutes.
Extended self-test routine
recommended polling time: 	 ( 269) minutes.
Conveyance self-test routine
recommended polling time: 	 (   5) minutes.
SCT capabilities: 	       (0x703d)	SCT Status supported.
					SCT Error Recovery Control supported.
					SCT Feature Control supported.
					SCT Data Table supported.

SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  1 Raw_Read_Error_Rate     0x002f   200   200   051    Pre-fail  Always       -       47
  3 Spin_Up_Time            0x0027   196   168   021    Pre-fail  Always       -       3200
  4 Start_Stop_Count        0x0032   099   099   000    Old_age   Always       -       1670
  5 Reallocated_Sector_Ct   0x0033   200   200   140    Pre-fail  Always       -       0
  7 Seek_Error_Rate         0x002e   200   200   000    Old_age   Always       -       1
  9 Power_On_Hours          0x0032   080   080   000    Old_age   Always       -       15003
 10 Spin_Retry_Count        0x0032   100   100   000    Old_age   Always       -       0
 11 Calibration_Retry_Count 0x0032   100   100   000    Old_age   Always       -       0
 12 Power_Cycle_Count       0x0032   099   099   000    Old_age   Always       -       1609
192 Power-Off_Retract_Count 0x0032   200   200   000    Old_age   Always       -       215
193 Load_Cycle_Count        0x0032   001   001   000    Old_age   Always       -       839507
194 Temperature_Celsius     0x0022   102   092   000    Old_age   Always       -       45
196 Reallocated_Event_Count 0x0032   200   200   000    Old_age   Always       -       0
197 Current_Pending_Sector  0x0032   200   200   000    Old_age   Always       -       0
198 Offline_Uncorrectable   0x0030   200   200   000    Old_age   Offline      -       0
199 UDMA_CRC_Error_Count    0x0032   200   200   000    Old_age   Always       -       0
200 Multi_Zone_Error_Rate   0x0008   200   200   000    Old_age   Offline      -       0

SMART Error Log Version: 1
ATA Error Count: 41 (device log contains only the most recent five errors)
	CR = Command Register [HEX]
	FR = Features Register [HEX]
	SC = Sector Count Register [HEX]
	SN = Sector Number Register [HEX]
	CL = Cylinder Low Register [HEX]
	CH = Cylinder High Register [HEX]
	DH = Device/Head Register [HEX]
	DC = Device Command Register [HEX]
	ER = Error register [HEX]
	ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.

Error 41 occurred at disk power-on lifetime: 14990 hours (624 days + 14 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  10 51 08 58 08 40 e0  Error: IDNF at LBA = 0x00400858 = 4196440

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  ca 00 08 58 08 40 e0 00      03:21:17.337  WRITE DMA

Error 40 occurred at disk power-on lifetime: 14990 hours (624 days + 14 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  40 51 08 48 c6 cc e0  Error: UNC 8 sectors at LBA = 0x00ccc648 = 13420104

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  c8 00 08 48 c6 cc e0 00      03:20:34.611  READ DMA

Error 39 occurred at disk power-on lifetime: 14990 hours (624 days + 14 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  10 51 10 98 21 80 e0  Error: IDNF at LBA = 0x00802198 = 8397208

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  ca 00 10 98 21 80 e0 00      02:59:00.438  WRITE DMA
  ec 00 00 00 00 00 a0 00      02:59:00.435  IDENTIFY DEVICE
  ef 03 45 00 00 00 a0 00      02:59:00.435  SET FEATURES [Set transfer mode]

Error 38 occurred at disk power-on lifetime: 14990 hours (624 days + 14 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  10 51 10 98 21 80 e0  Error: IDNF at LBA = 0x00802198 = 8397208

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  ca 00 10 98 21 80 e0 00      02:58:53.420  WRITE DMA
  ec 00 00 00 00 00 a0 00      02:58:53.417  IDENTIFY DEVICE
  ef 03 45 00 00 00 a0 00      02:58:53.417  SET FEATURES [Set transfer mode]

Error 37 occurred at disk power-on lifetime: 14990 hours (624 days + 14 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  10 51 10 98 21 80 e0  Error: IDNF at LBA = 0x00802198 = 8397208

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  ca 00 10 98 21 80 e0 00      02:58:46.391  WRITE DMA
  ec 00 00 00 00 00 a0 00      02:58:46.388  IDENTIFY DEVICE
  ef 03 45 00 00 00 a0 00      02:58:46.388  SET FEATURES [Set transfer mode]

SMART Self-test log structure revision number 1
Num  Test_Description    Status                  Remaining  LifeTime(hours)  LBA_of_first_error
# 1  Extended offline    Interrupted (host reset)      90%     14977         -

SMART Selective self-test log data structure revision number 1
 SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1        0        0  Not_testing
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
    5        0        0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.

a2mains@PC-markorki:/home/marc$

geole · Le 28/07/2019, à 14:18

Au moins une bonne piste pour le bon disque

Error 41 occurred at disk power-on lifetime: 14990 hours (624 days + 14 hours)    Error: IDNF at LBA = 0x00400858 = 4196440
Error 40 occurred at disk power-on lifetime: 14990 hours (624 days + 14 hours)    Error: UNC 8 sectors at LBA = 0x00ccc648 = 13420104
Error 39 occurred at disk power-on lifetime: 14990 hours (624 days + 14 hours)    Error: IDNF at LBA = 0x00802198 = 8397208
Error 38 occurred at disk power-on lifetime: 14990 hours (624 days + 14 hours)   Error: IDNF at LBA = 0x00802198 = 8397208
Error 37 occurred at disk power-on lifetime: 14990 hours (624 days + 14 hours)   Error: IDNF at LBA = 0x00802198 = 8397208

SMART Self-test log structure revision number 1
Num  Test_Description    Status                  Remaining  LifeTime(hours)  LBA_of_first_error
# 1  Extended offline    Interrupted (host reset)      90%     14977         -

Ces erreurs sont survenues après le premier test. Elles ont donc été détectées par le second test. Je ne serais pas surpris qu'il décide d'arrêter au bout de 5 erreurs détectées car c'est la limite d'affichage.

IDNF: IDentity Not Found
IDNF (ID Not Found): user-accessible address could not be found. For READ LOG type commands, IDNF can also indicate that a device data log structure checksum was incorrect.
==> je ne connais pas. C'est probablement l'équivalent de ' Input/output error'
On va regarder si c'est lisible.

sudo   hdparm     --read-sector  4196440  /dev/disk/by-id/ata-WDC_WD20EFRX-68EUZN0_WD-WCC4M0970110
sudo   hdparm     --read-sector  8397208  /dev/disk/by-id/ata-WDC_WD20EFRX-68EUZN0_WD-WCC4M0970110

UNC: UNCorrectable Error in Data
UNC (UNCorrectable): data is uncorrectable. This refers to data which has been read from the disk, but for which the Error 198,
=> je sais ce qu'il faut faire. On va d'abord vérifier que c'est le bon endroit et que c'est encore illisible

sudo   hdparm     --read-sector  13420104  /dev/disk/by-id/ata-WDC_WD20EFRX-68EUZN0_WD-WCC4M0970110
sudo   hdparm     --read-sector  13420105  /dev/disk/by-id/ata-WDC_WD20EFRX-68EUZN0_WD-WCC4M0970110
sudo   hdparm     --read-sector  13420106  /dev/disk/by-id/ata-WDC_WD20EFRX-68EUZN0_WD-WCC4M0970110
sudo   hdparm     --read-sector  13420107  /dev/disk/by-id/ata-WDC_WD20EFRX-68EUZN0_WD-WCC4M0970110
sudo   hdparm     --read-sector  13420108  /dev/disk/by-id/ata-WDC_WD20EFRX-68EUZN0_WD-WCC4M0970110
sudo   hdparm     --read-sector  13420109  /dev/disk/by-id/ata-WDC_WD20EFRX-68EUZN0_WD-WCC4M0970110
sudo   hdparm     --read-sector  13420110  /dev/disk/by-id/ata-WDC_WD20EFRX-68EUZN0_WD-WCC4M0970110
sudo   hdparm     --read-sector  13420110  /dev/disk/by-id/ata-WDC_WD20EFRX-68EUZN0_WD-WCC4M0970110

Markorki · Le 28/07/2019, à 14:46

a2mains@PC-markorki:/home/marc$ sudo   hdparm     --read-sector  4196440  /dev/disk/by-id/ata-WDC_WD20EFRX-68EUZN0_WD-WCC4M0970110
[sudo] Mot de passe de a2mains : 

/dev/disk/by-id/ata-WDC_WD20EFRX-68EUZN0_WD-WCC4M0970110:
reading sector 4196440: succeeded
ffff ffff ffff ffff ffff ffff ffff ffff
ffff ffff ffff ffff ffff ffff ffff ffff
ffff ffff ffff ffff ffff ffff ffff ffff
ffff ffff ffff ffff ffff ffff ffff ffff
ffff ffff ffff ffff ffff ffff ffff ffff
ffff ffff ffff ffff ffff ffff ffff ffff
ffff ffff ffff ffff ffff ffff ffff ffff
ffff ffff ffff ffff ffff ffff ffff ffff
0700 0000 ffff 7f00 ffff ffff ff7f 0000
0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000
ffff ffff ffff ffff ffff ffff ffff ffff
ffff ffff ffff ffff ffff ffff ffff ffff
ffff ffff ffff ffff ffff ffff ffff ffff
ffff ffff ffff ffff ffff ffff ffff ffff
ffff ffff ffff ffff ffff ffff ffff ffff
ffff ffff ffff ffff ffff ffff ffff ffff
ffff ffff ffff ffff ffff ffff ffff ffff
ffff ffff ffff ffff ffff ffff ffff ffff
ffff ffff ffff ffff ffff ffff ffff ffff
ffff ffff ffff ffff ffff ffff ffff ffff
ffff ffff ffff ffff ffff ffff ffff ffff
ffff ffff ffff ffff ffff ffff ffff ffff
ffff ffff ffff ffff ffff ffff ffff ffff
ffff ffff ffff ffff ffff ffff ffff ffff
ffff ffff ffff ffff ffff ffff ffff ffff
ffff ffff ffff ffff ffff ffff ffff ffff
a2mains@PC-markorki:/home/marc$

et :

a2mains@PC-markorki:/home/marc$ 
a2mains@PC-markorki:/home/marc$ sudo   hdparm     --read-sector  8397208  /dev/disk/by-id/ata-WDC_WD20EFRX-68EUZN0_WD-WCC4M0970110

/dev/disk/by-id/ata-WDC_WD20EFRX-68EUZN0_WD-WCC4M0970110:
reading sector 8397208: succeeded
a481 0000 cf01 0000 fef4 9659 08d2 395d
fef4 9659 0000 0000 0000 0100 0800 0000
0000 0800 0100 0000 0af3 0100 0400 0000
0000 0000 0000 0000 0100 0000 f46a 1100
0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 94b0 b90f 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 86fe 0000
2000 5af5 5450 d399 0000 0000 0000 0000
08d2 395d 5450 d399 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000
a481 0000 cf01 0000 fef4 9659 08d2 395d
fef4 9659 0000 0000 0000 0100 0800 0000
0000 0800 0100 0000 0af3 0100 0400 0000
0000 0000 0000 0000 0100 0000 f56a 1100
0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0f67 0110 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 6984 0000
2000 99fe 5450 d399 0000 0000 0000 0000
08d2 395d 5450 d399 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000
a2mains@PC-markorki:/home/marc$

pour les unc :

a2mains@PC-markorki:/home/marc$ sudo   hdparm     --read-sector  13420104  /dev/disk/by-id/ata-WDC_WD20EFRX-68EUZN0_WD-WCC4M0970110

/dev/disk/by-id/ata-WDC_WD20EFRX-68EUZN0_WD-WCC4M0970110:
reading sector 13420104: succeeded
3c3f 786d 6c20 7665 7273 696f 6e3d 2231
2e30 2220 656e 636f 6469 6e67 3d22 5554
462d 3822 3f3e 0a3c 212d 2d20 4372 6561
7465 6420 7769 7468 2049 6e6b 7363 6170
6520 2868 7474 703a 2f2f 7777 772e 696e
6b73 6361 7065 2e6f 7267 2f29 202d 2d3e
0a3c 7376 6720 6964 3d22 7376 6732 3836
3822 2077 6964 7468 3d22 3136 2220 6865
6967 6874 3d22 3136 2220 7665 7273 696f
6e3d 2231 2e31 2220 786d 6c6e 733d 2268
7474 703a 2f2f 7777 772e 7733 2e6f 7267
2f32 3030 302f 7376 6722 2078 6d6c 6e73
3a78 6c69 6e6b 3d22 6874 7470 3a2f 2f77
7777 2e77 332e 6f72 672f 3139 3939 2f78
6c69 6e6b 223e 0a20 3c64 6566 7320 6964
3d22 6465 6673 3238 3730 223e 0a20 203c
6c69 6e65 6172 4772 6164 6965 6e74 2069
643d 226c 696e 6561 7247 7261 6469 656e
7436 3337 3222 2078 313d 2232 3935 2e31
2220 7832 3d22 3239 362e 3934 2220 7931
3d22 372e 3736 3431 2220 7932 3d22 3130
2e37 3131 2220 6772 6164 6965 6e74 5472
616e 7366 6f72 6d3d 226d 6174 7269 7828
312e 3132 3138 202d 2e32 3730 3534 202e
3335 3036 3520 312e 3339 3434 202d 3332
372e 3220 3735 2e31 3938 2922 2067 7261
6469 656e 7455 6e69 7473 3d22 7573 6572
5370 6163 654f 6e55 7365 2220 786c 696e
6b3a 6872 6566 3d22 2358 4d4c 4944 5f38
3937 5f22 2f3e 0a20 203c 6c69 6e65 6172
4772 6164 6965 6e74 2069 643d 2258 4d4c
4944 5f38 3937 5f22 2078 313d 2232 3932
a2mains@PC-markorki:/home/marc$ 
a2mains@PC-markorki:/home/marc$

2/8

a2mains@PC-markorki:/home/marc$ sudo   hdparm     --read-sector  13420105  /dev/disk/by-id/ata-WDC_WD20EFRX-68EUZN0_WD-WCC4M0970110

/dev/disk/by-id/ata-WDC_WD20EFRX-68EUZN0_WD-WCC4M0970110:
reading sector 13420105: succeeded
2e39 3722 2078 323d 2232 3936 2e39 3422
2079 313d 2234 2e37 3539 3322 2079 323d
2231 302e 3731 3122 2067 7261 6469 656e
7455 6e69 7473 3d22 7573 6572 5370 6163
654f 6e55 7365 223e 0a20 2020 3c73 746f
7020 6964 3d22 7374 6f70 3435 3039 3322
2073 7479 6c65 3d22 7374 6f70 2d63 6f6c
6f72 3a23 6538 6538 6535 2220 6f66 6673
6574 3d22 3022 2f3e 0a20 2020 3c73 746f
7020 6964 3d22 7374 6f70 3435 3039 3522
2073 7479 6c65 3d22 7374 6f70 2d63 6f6c
6f72 3a23 6630 6630 6630 2220 6f66 6673
6574 3d22 3122 2f3e 0a20 203c 2f6c 696e
6561 7247 7261 6469 656e 743e 0a20 203c
6c69 6e65 6172 4772 6164 6965 6e74 2069
643d 226c 696e 6561 7247 7261 6469 656e
7432 3932 3222 2078 313d 2232 3933 2e36
3822 2078 323d 2232 3936 2e39 3422 2079
313d 2235 2e34 3639 2220 7932 3d22 3130
2e37 3131 2220 6772 6164 6965 6e74 5472
616e 7366 6f72 6d3d 226d 6174 7269 7828
2d31 2e31 3135 3120 2d2e 3233 3135 3720
2d2e 3331 3936 3420 312e 3339 3333 2033
3431 2e32 3420 3633 2e38 3239 2922 2067
7261 6469 656e 7455 6e69 7473 3d22 7573
6572 5370 6163 654f 6e55 7365 2220 786c
696e 6b3a 6872 6566 3d22 2358 4d4c 4944
5f38 3937 5f22 2f3e 0a20 3c2f 6465 6673
3e0a 203c 6720 6964 3d22 6c61 7965 7231
223e 0a20 203c 7061 7468 2069 643d 2270
6174 6831 3236 3236 2220 643d 226d 3133
2e34 3120 302e 3438 3735 3663 302e 3035
a2mains@PC-markorki:/home/marc$

3/8 :

a2mains@PC-markorki:/home/marc$ sudo   hdparm     --read-sector  13420106  /dev/disk/by-id/ata-WDC_WD20EFRX-68EUZN0_WD-WCC4M0970110

/dev/disk/by-id/ata-WDC_WD20EFRX-68EUZN0_WD-WCC4M0970110:
reading sector 13420106: succeeded
3139 3520 302e 3033 3439 3636 2030 2e31
3031 3533 2030 2e30 3732 3132 2030 2e31
3531 3734 2030 2e31 3038 3236 6c2d 302e
3033 3539 3620 332e 3039 3134 632d 302e
3532 3535 3820 322e 3331 3238 2d33 2e30
3030 3420 332e 3438 3437 2d34 2e35 3233
3120 352e 3433 3737 2d30 2e32 3132 3739
2030 2e30 3037 3635 312d 302e 3432 3231
392d 302e 3331 3831 372d 302e 3632 3731
382d 302e 3335 3434 372d 302e 3433 3136
332d 302e 3037 3534 3432 2d30 2e38 3533
3434 2d30 2e32 3435 3837 2d31 2e32 3138
352d 302e 3531 3230 3720 322e 3032 3532
2d32 2e35 3936 3920 342e 3230 3737 2d35
2e31 3939 3920 362e 3235 332d 372e 3737
3038 7a22 2073 7479 6c65 3d22 6669 6c6c
3a75 726c 2823 6c69 6e65 6172 4772 6164
6965 6e74 3239 3232 293b 7374 726f 6b65
2d6c 696e 6563 6170 3a72 6f75 6e64 3b73
7472 6f6b 652d 6c69 6e65 6a6f 696e 3a72
6f75 6e64 3b73 7472 6f6b 653a 2338 3838
6138 3522 2f3e 0a20 203c 706f 6c79 676f
6e20 6964 3d22 706f 6c79 676f 6e32 3938
3122 2074 7261 6e73 666f 726d 3d22 6d61
7472 6978 282d 2e39 3933 3137 202d 2e32
3739 3834 202d 2e33 3533 3433 2031 2e32
3039 3220 3330 372e 3436 2037 372e 3238
3629 2220 706f 696e 7473 3d22 3239 362e
3936 2031 322e 3320 3239 372e 3620 3133
2e33 3835 2032 3938 2e38 3720 3134 2e37
3139 2032 3939 2e32 3720 3133 2e36 3733
2032 3938 2e32 3520 3131 2e39 3622 2073
a2mains@PC-markorki:/home/marc$

4/8

a2mains@PC-markorki:/home/marc$ 
a2mains@PC-markorki:/home/marc$ sudo   hdparm     --read-sector  13420107  /dev/disk/by-id/ata-WDC_WD20EFRX-68EUZN0_WD-WCC4M0970110

/dev/disk/by-id/ata-WDC_WD20EFRX-68EUZN0_WD-WCC4M0970110:
reading sector 13420107: succeeded
7479 6c65 3d22 6669 6c6c 3a23 6431 3532
3463 3b73 7472 6f6b 652d 6c69 6e65 6361
703a 726f 756e 643b 7374 726f 6b65 2d6c
696e 656a 6f69 6e3a 726f 756e 643b 7374
726f 6b65 2d77 6964 7468 3a2e 3837 3731
323b 7374 726f 6b65 3a23 3937 3331 3337
222f 3e0a 2020 3c70 6174 6820 6964 3d22
7061 7468 3132 3633 3222 2064 3d22 6d32
2e37 3131 3920 302e 3533 3737 372d 302e
3135 3131 3420 302e 3131 3432 312d 302e
3032 3231 3331 2032 2e38 3538 3263 302e
3436 3133 3820 322e 3438 3938 2032 2e39
3834 3120 332e 3731 3932 2034 2e35 3631
3220 352e 3633 3820 302e 3231 3531 3120
362e 3334 3665 2d34 2031 2e30 3939 3220
302e 3334 3036 3220 312e 3330 3536 2030
2e32 3937 3232 2030 2e34 3334 3534 2d30
2e30 3930 3433 3420 302e 3835 3732 352d
302e 3237 3632 3820 312e 3232 3037 2d30
2e35 3536 3834 2d32 2e30 3937 362d 322e
3535 3135 2d34 2e37 3936 382d 352e 3832
3632 2d36 2e39 3134 322d 382e 3335 3038
7a22 2073 7479 6c65 3d22 6669 6c6c 3a75
726c 2823 6c69 6e65 6172 4772 6164 6965
6e74 3633 3732 293b 7374 726f 6b65 2d6c
696e 6563 6170 3a72 6f75 6e64 3b73 7472
6f6b 652d 6c69 6e65 6a6f 696e 3a72 6f75
6e64 3b73 7472 6f6b 653a 2338 3838 6138
3522 2f3e 0a20 203c 7061 7468 2069 643d
2270 6174 6831 3236 3338 2220 643d 226d
362e 3333 3731 2031 302e 3339 3963 302e
3735 3132 3420 302e 3939 3632 3920 302e
a2mains@PC-markorki:/home/marc$

5/8

a2mains@PC-markorki:/home/marc$ 
a2mains@PC-markorki:/home/marc$ sudo   hdparm     --read-sector  13420108  /dev/disk/by-id/ata-WDC_WD20EFRX-68EUZN0_WD-WCC4M0970110

/dev/disk/by-id/ata-WDC_WD20EFRX-68EUZN0_WD-WCC4M0970110:
reading sector 13420108: succeeded
3335 3339 3920 332e 3330 3636 2d30 2e36
3635 3833 2034 2e36 3038 382d 312e 3032
2031 2e33 3033 312d 322e 3237 3531 2031
2e31 3035 382d 332e 3032 3732 2030 2e31
3132 3139 2d30 2e37 3531 3633 2d30 2e39
3936 3435 2d30 2e35 3334 3636 2d32 2e38
3538 3820 302e 3438 3531 392d 342e 3136
3039 2031 2e30 3139 342d 312e 3330 3233
2032 2e34 3535 352d 312e 3535 3137 2033
2e32 3037 382d 302e 3536 3030 327a 6d2d
302e 3634 3838 3220 302e 3833 3036 3563
2d30 2e33 3333 3736 2d30 2e34 3431 3233
2d31 2e32 3138 392d 302e 3238 3134 342d
312e 3930 3338 2030 2e35 3934 3931 2d30
2e36 3836 3035 2030 2e38 3735 3932 2d30
2e38 3235 3537 2032 2e30 3235 342d 302e
3439 3230 3120 322e 3436 3536 2030 2e33
3333 3120 302e 3434 3237 3720 312e 3033
3837 2030 2e37 3238 3432 2031 2e37 3233
362d 302e 3134 3739 3720 302e 3638 3634
332d 302e 3837 3537 3520 312e 3030 362d
322e 3437 3133 2030 2e36 3732 3231 2d32
2e39 3132 367a 2220 7374 796c 653d 2266
696c 6c3a 2364 3135 3234 633b 7374 726f
6b65 2d77 6964 7468 3a2e 3534 3639 353b
7374 726f 6b65 3a23 3937 3331 3337 222f
3e0a 2020 3c70 6f6c 7967 6f6e 2069 643d
2270 6f6c 7967 6f6e 3132 3634 3022 2074
7261 6e73 666f 726d 3d22 6d61 7472 6978
2831 2e30 3032 3120 2d2e 3234 3631 3320
2e33 3132 3338 2031 2e32 3230 3420 2d32
3933 2e33 3220 3637 2e33 3335 2922 2070
a2mains@PC-markorki:/home/marc$

6/8

a2mains@PC-markorki:/home/marc$ 
a2mains@PC-markorki:/home/marc$ sudo   hdparm     --read-sector  13420109  /dev/disk/by-id/ata-WDC_WD20EFRX-68EUZN0_WD-WCC4M0970110

/dev/disk/by-id/ata-WDC_WD20EFRX-68EUZN0_WD-WCC4M0970110:
reading sector 13420109: succeeded
6f69 6e74 733d 2232 3937 2e36 2031 332e
3338 3520 3239 382e 3837 2031 342e 3731
3920 3239 392e 3237 2031 332e 3637 3320
3239 382e 3235 2031 312e 3936 2032 3936
2e39 3620 3132 2e33 2032 3936 2e39 3620
3132 2e33 2220 7374 796c 653d 2266 696c
6c3a 2364 3135 3234 633b 7374 726f 6b65
2d6c 696e 6563 6170 3a72 6f75 6e64 3b73
7472 6f6b 652d 6c69 6e65 6a6f 696e 3a72
6f75 6e64 3b73 7472 6f6b 652d 7769 6474
683a 2e38 3737 3132 3b73 7472 6f6b 653a
2339 3733 3133 3722 2f3e 0a20 203c 7061
7468 2069 643d 2270 6174 6832 3832 3822
2064 3d22 6d39 2e35 3835 3920 3130 2e33
3939 632d 302e 3735 3132 3420 302e 3939
3632 392d 302e 3335 3339 3920 332e 3330
3636 2030 2e36 3635 3833 2034 2e36 3038
3820 312e 3032 2031 2e33 3033 3120 322e
3237 3531 2031 2e31 3035 3820 332e 3032
3732 2030 2e31 3132 3139 2030 2e37 3531
3633 2d30 2e39 3936 3435 2030 2e35 3334
3636 2d32 2e38 3538 382d 302e 3438 3531
392d 342e 3136 3039 2d31 2e30 3139 342d
312e 3330 3233 2d32 2e34 3535 352d 312e
3535 3137 2d33 2e32 3037 382d 302e 3536
3030 327a 6d30 2e36 3438 3832 2030 2e38
3330 3635 6330 2e33 3333 3736 2d30 2e34
3431 3233 2031 2e32 3138 392d 302e 3238
3134 3420 312e 3930 3338 2030 2e35 3934
3931 2030 2e36 3836 3035 2030 2e38 3735
3932 2030 2e38 3235 3537 2032 2e30 3235
3420 302e 3439 3230 3120 322e 3436 3536
a2mains@PC-markorki:/home/marc$

7/8

a2mains@PC-markorki:/home/marc$ 
a2mains@PC-markorki:/home/marc$ sudo   hdparm     --read-sector  13420110  /dev/disk/by-id/ata-WDC_WD20EFRX-68EUZN0_WD-WCC4M0970110

/dev/disk/by-id/ata-WDC_WD20EFRX-68EUZN0_WD-WCC4M0970110:
reading sector 13420110: succeeded
2d30 2e33 3333 3120 302e 3434 3237 372d
312e 3033 3837 2030 2e37 3238 3432 2d31
2e37 3233 362d 302e 3134 3739 372d 302e
3638 3634 332d 302e 3837 3537 352d 312e
3030 362d 322e 3437 3133 2d30 2e36 3732
3231 2d32 2e39 3132 367a 2220 7374 796c
653d 2266 696c 6c3a 2364 3135 3234 633b
7374 726f 6b65 2d77 6964 7468 3a2e 3534
3639 353b 7374 726f 6b65 3a23 3937 3331
3337 222f 3e0a 203c 2f67 3e0a 3c2f 7376
673e 0a00 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000
a2mains@PC-markorki:/home/marc$

8/8

a2mains@PC-markorki:/home/marc$ 
a2mains@PC-markorki:/home/marc$ sudo   hdparm     --read-sector  13420111  /dev/disk/by-id/ata-WDC_WD20EFRX-68EUZN0_WD-WCC4M0970110

/dev/disk/by-id/ata-WDC_WD20EFRX-68EUZN0_WD-WCC4M0970110:
reading sector 13420111: succeeded
0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000
a2mains@PC-markorki:/home/marc$

Le 8ème rend uniquement des 0, mais "succeeded"

juste un commentaire dans le post suivant ;-)

Markorki · Le 28/07/2019, à 14:51

Commentaire :

J'ai eu des problèmes de Gparted à un changement de version d'ubuntu, sur des limites de partition : fallait-il une limite au Mo ou au secteur physique, j'ai demandé un conseil et l'ai suivi.

Ces DD ont des secteurs physiques de 4Ko, et logiques de 512o.

Le pb ne serait-il pas du style début de partition au-milieu d'un secteur physique ou qq chose du genre.

Ou les erreurs se produisent-elles par exemple uniquement lors du mount d'une partition?
Comment vérifier les différentes pistes qu'on peut imaginer ?

Ubuntu-fr

Navigation

Liens de recherche

Annonce

#1 Le 26/07/2019, à 18:20

Compte-rendus smart durablement "inconsistent": problème ou non ??

#2 Le 26/07/2019, à 18:51

Re : Compte-rendus smart durablement "inconsistent": problème ou non ??

#3 Le 26/07/2019, à 18:57

Re : Compte-rendus smart durablement "inconsistent": problème ou non ??

#4 Le 26/07/2019, à 19:21

Re : Compte-rendus smart durablement "inconsistent": problème ou non ??

#5 Le 26/07/2019, à 19:58

Re : Compte-rendus smart durablement "inconsistent": problème ou non ??

#6 Le 26/07/2019, à 21:59

Re : Compte-rendus smart durablement "inconsistent": problème ou non ??

#7 Le 27/07/2019, à 00:51

Re : Compte-rendus smart durablement "inconsistent": problème ou non ??

#8 Le 27/07/2019, à 11:17

Re : Compte-rendus smart durablement "inconsistent": problème ou non ??

#9 Le 27/07/2019, à 11:34

Re : Compte-rendus smart durablement "inconsistent": problème ou non ??

#10 Le 27/07/2019, à 12:45

Re : Compte-rendus smart durablement "inconsistent": problème ou non ??

#11 Le 27/07/2019, à 13:17

Re : Compte-rendus smart durablement "inconsistent": problème ou non ??

#12 Le 27/07/2019, à 13:29

Re : Compte-rendus smart durablement "inconsistent": problème ou non ??

#13 Le 27/07/2019, à 16:02

Re : Compte-rendus smart durablement "inconsistent": problème ou non ??

#14 Le 27/07/2019, à 16:27

Re : Compte-rendus smart durablement "inconsistent": problème ou non ??

#15 Le 27/07/2019, à 16:38

Re : Compte-rendus smart durablement "inconsistent": problème ou non ??

#16 Le 27/07/2019, à 17:09

Re : Compte-rendus smart durablement "inconsistent": problème ou non ??

#17 Le 27/07/2019, à 17:30

Re : Compte-rendus smart durablement "inconsistent": problème ou non ??

#18 Le 27/07/2019, à 18:45

Re : Compte-rendus smart durablement "inconsistent": problème ou non ??

#19 Le 27/07/2019, à 22:25

Re : Compte-rendus smart durablement "inconsistent": problème ou non ??

#20 Le 28/07/2019, à 09:37

Re : Compte-rendus smart durablement "inconsistent": problème ou non ??

#21 Le 28/07/2019, à 12:21

Re : Compte-rendus smart durablement "inconsistent": problème ou non ??

#22 Le 28/07/2019, à 13:19

Re : Compte-rendus smart durablement "inconsistent": problème ou non ??

#23 Le 28/07/2019, à 14:18

Re : Compte-rendus smart durablement "inconsistent": problème ou non ??

#24 Le 28/07/2019, à 14:46

Re : Compte-rendus smart durablement "inconsistent": problème ou non ??

#25 Le 28/07/2019, à 14:51

Re : Compte-rendus smart durablement "inconsistent": problème ou non ??

Pied de page des forums