Contenu | Rechercher | Menus

Annonce

Si vous avez des soucis pour rester connecté, déconnectez-vous puis reconnectez-vous depuis ce lien en cochant la case
Me connecter automatiquement lors de mes prochaines visites.

À propos de l'équipe du forum.

Pages : 1

#1 Le 11/10/2019, à 22:11

Detork

[Résolu -> problème HDMI] Black screen si je n'utilise pas nomodeset

Bonjour/Bonsoir.

Je viens ici demander de l'aide après 4 jours de recherche mais je n'ai plus le choix je crois bien ne pas pouvoir régler ce problème seul en tant que débutant sur Xubuntu/Linux de manière générale (il s'agit là de la toute première fois que je l'utilise).

Je suis obligé d'activé l'option nomodeset sans quoi après avoir choisi mon option dans le Grub, Xubuntu me fait un blackscreen, et je suis contraint d'arrêter le système via le bouton d'alimentation. (Et ce depuis le tout début de l'installation et même pour la session test)
Le problème c'est que je me retrouve alors avec une résolution de 800x600@75.00hz. Je pense que c'est à cause de ça :

detork@DETORK:~$ sudo lshw -c video
[sudo] Mot de passe de detork : 
  *-display NON-RÉCLAMÉ     
       description: Display controller
       produit: Jet PRO [Radeon R5 M230]
       fabriquant: Advanced Micro Devices, Inc. [AMD/ATI]
       identifiant matériel: 0
       information bus: pci@0000:01:00.0
       version: 83
       bits: 64 bits
       horloge: 33MHz
       fonctionnalités: pm pciexpress msi bus_master cap_list
       configuration: latency=0
       ressources: mémoire:c0000000-cfffffff mémoire:df200000-df23ffff portE/S:e000(taille=256) mémoire:df240000-df25ffff
  *-display NON-RÉCLAMÉ
       description: VGA compatible controller
       produit: HD Graphics 530
       fabriquant: Intel Corporation
       identifiant matériel: 2
       information bus: pci@0000:00:02.0
       version: 06
       bits: 64 bits
       horloge: 33MHz
       fonctionnalités: pciexpress msi pm vga_controller bus_master cap_list
       configuration: latency=0
       ressources: mémoire:de000000-deffffff mémoire:b0000000-bfffffff portE/S:f000(taille=64) mémoire:c0000-dffff

Si j'ai bien compris aucun de mes drivers graphiques ne sont utilisés ? Et si j'ai bien compris ce que j'ai vu sur internet, ce serait à cause de nomodeset ? Mais si je désactive cette option, black screen...

Voici le contenu de deux fichiers utiles apparemment pour aider à comprendre le problème :

/etc/x11/xorg.conf : N'existe pas

/var/log/Xorg.0.conf :

[    18.278] 
X.Org X Server 1.20.4
X Protocol Version 11, Revision 0
[    18.278] Build Operating System: Linux 4.4.0-148-generic x86_64 Ubuntu
[    18.278] Current Operating System: Linux DETORK 5.0.0-31-generic #33~18.04.1-Ubuntu SMP Tue Oct 1 10:20:39 UTC 2019 x86_64
[    18.278] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-5.0.0-31-generic root=UUID=48e66455-e1d4-43b2-9a69-67c2f9bd49e8 ro quiet splash vt.handoff=1 nomodeset
[    18.278] Build Date: 02 May 2019  08:06:54AM
[    18.278] xorg-server-hwe-18.04 2:1.20.4-1ubuntu3~18.04.1 (For technical support please see http://www.ubuntu.com/support) 
[    18.278] Current version of pixman: 0.34.0
[    18.278] 	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
[    18.278] Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[    18.278] (==) Log file: "/var/log/Xorg.0.log", Time: Fri Oct 11 21:27:21 2019
[    18.279] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[    18.279] (==) No Layout section.  Using the first Screen section.
[    18.279] (==) No screen section available. Using defaults.
[    18.279] (**) |-->Screen "Default Screen Section" (0)
[    18.279] (**) |   |-->Monitor "<default monitor>"
[    18.279] (==) No monitor specified for screen "Default Screen Section".
	Using a default monitor configuration.
[    18.279] (==) Automatically adding devices
[    18.279] (==) Automatically enabling devices
[    18.279] (==) Automatically adding GPU devices
[    18.279] (==) Automatically binding GPU devices
[    18.279] (==) Max clients allowed: 256, resource mask: 0x1fffff
[    18.279] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[    18.279] 	Entry deleted from font path.
[    18.279] (WW) The directory "/usr/share/fonts/X11/100dpi/" does not exist.
[    18.279] 	Entry deleted from font path.
[    18.279] (WW) The directory "/usr/share/fonts/X11/75dpi/" does not exist.
[    18.279] 	Entry deleted from font path.
[    18.279] (WW) The directory "/usr/share/fonts/X11/100dpi" does not exist.
[    18.279] 	Entry deleted from font path.
[    18.279] (WW) The directory "/usr/share/fonts/X11/75dpi" does not exist.
[    18.279] 	Entry deleted from font path.
[    18.279] (==) FontPath set to:
	/usr/share/fonts/X11/misc,
	/usr/share/fonts/X11/Type1,
	built-ins
[    18.279] (==) ModulePath set to "/usr/lib/xorg/modules"
[    18.279] (II) The server relies on udev to provide the list of input devices.
	If no devices become available, reconfigure udev or disable AutoAddDevices.
[    18.279] (II) Loader magic: 0x55d6df097020
[    18.279] (II) Module ABI versions:
[    18.279] 	X.Org ANSI C Emulation: 0.4
[    18.279] 	X.Org Video Driver: 24.0
[    18.279] 	X.Org XInput driver : 24.1
[    18.279] 	X.Org Server Extension : 10.0
[    18.280] (++) using VT number 7

[    18.280] (II) systemd-logind: logind integration requires -keeptty and -keeptty was not provided, disabling logind integration
[    18.281] (--) PCI:*(0@0:2:0) 8086:1912:103c:2b47 rev 6, Mem @ 0xde000000/16777216, 0xb0000000/268435456, I/O @ 0x0000f000/64, BIOS @ 0x????????/131072
[    18.281] (--) PCI: (1@0:0:0) 1002:6665:1b0a:90f1 rev 131, Mem @ 0xc0000000/268435456, 0xdf200000/262144, I/O @ 0x0000e000/256, BIOS @ 0x????????/131072
[    18.281] (II) LoadModule: "glx"
[    18.281] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[    18.334] (II) Module glx: vendor="X.Org Foundation"
[    18.334] 	compiled for 1.20.4, module version = 1.0.0
[    18.334] 	ABI class: X.Org Server Extension, version 10.0
[    18.334] (==) Matched modesetting as autoconfigured driver 0
[    18.334] (==) Matched fbdev as autoconfigured driver 1
[    18.334] (==) Matched vesa as autoconfigured driver 2
[    18.334] (==) Assigned the driver to the xf86ConfigLayout
[    18.334] (II) LoadModule: "modesetting"
[    18.334] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[    18.334] (II) Module modesetting: vendor="X.Org Foundation"
[    18.334] 	compiled for 1.20.4, module version = 1.20.4
[    18.334] 	Module class: X.Org Video Driver
[    18.334] 	ABI class: X.Org Video Driver, version 24.0
[    18.334] (II) LoadModule: "fbdev"
[    18.334] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[    18.334] (II) Module fbdev: vendor="X.Org Foundation"
[    18.334] 	compiled for 1.20.1, module version = 0.5.0
[    18.334] 	Module class: X.Org Video Driver
[    18.334] 	ABI class: X.Org Video Driver, version 24.0
[    18.334] (II) LoadModule: "vesa"
[    18.334] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[    18.334] (II) Module vesa: vendor="X.Org Foundation"
[    18.334] 	compiled for 1.20.1, module version = 2.4.0
[    18.334] 	Module class: X.Org Video Driver
[    18.334] 	ABI class: X.Org Video Driver, version 24.0
[    18.334] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[    18.334] (II) FBDEV: driver for framebuffer: fbdev
[    18.334] (II) VESA: driver for VESA chipsets: vesa
[    18.335] xf86EnableIOPorts: failed to set IOPL for I/O (Operation not permitted)
[    18.335] (EE) open /dev/dri/card0: No such file or directory
[    18.335] (WW) Falling back to old probe method for modesetting
[    18.335] (EE) open /dev/dri/card0: No such file or directory
[    18.335] (II) Loading sub module "fbdevhw"
[    18.335] (II) LoadModule: "fbdevhw"
[    18.336] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[    18.336] (II) Module fbdevhw: vendor="X.Org Foundation"
[    18.336] 	compiled for 1.20.4, module version = 0.0.2
[    18.336] 	ABI class: X.Org Video Driver, version 24.0
[    18.336] (**) FBDEV(1): claimed PCI slot 0@0:2:0
[    18.336] (II) FBDEV(1): using default device
[    18.336] (EE) Screen 0 deleted because of no matching config section.
[    18.336] (II) UnloadModule: "modesetting"
[    18.336] (II) FBDEV(0): Creating default Display subsection in Screen section
	"Default Screen Section" for depth/fbbpp 24/32
[    18.336] (==) FBDEV(0): Depth 24, (==) framebuffer bpp 32
[    18.336] (==) FBDEV(0): RGB weight 888
[    18.336] (==) FBDEV(0): Default visual is TrueColor
[    18.336] (==) FBDEV(0): Using gamma correction (1.0, 1.0, 1.0)
[    18.336] (II) FBDEV(0): hardware: EFI VGA (video memory: 1876kB)
[    18.336] (II) FBDEV(0): checking modes against framebuffer device...
[    18.336] (II) FBDEV(0): checking modes against monitor...
[    18.336] (II) FBDEV(0): Virtual size is 800x600 (pitch 800)
[    18.336] (**) FBDEV(0):  Built-in mode "current": 48.0 MHz, 46.9 kHz, 75.1 Hz
[    18.336] (II) FBDEV(0): Modeline "current"x0.0   48.00  800 832 928 1024  600 604 608 624 -hsync -vsync -csync (46.9 kHz b)
[    18.336] (==) FBDEV(0): DPI set to (96, 96)
[    18.336] (II) Loading sub module "fb"
[    18.336] (II) LoadModule: "fb"
[    18.336] (II) Loading /usr/lib/xorg/modules/libfb.so
[    18.336] (II) Module fb: vendor="X.Org Foundation"
[    18.336] 	compiled for 1.20.4, module version = 1.0.0
[    18.336] 	ABI class: X.Org ANSI C Emulation, version 0.4
[    18.336] (**) FBDEV(0): using shadow framebuffer
[    18.336] (II) Loading sub module "shadow"
[    18.336] (II) LoadModule: "shadow"
[    18.336] (II) Loading /usr/lib/xorg/modules/libshadow.so
[    18.340] (II) Module shadow: vendor="X.Org Foundation"
[    18.340] 	compiled for 1.20.4, module version = 1.1.0
[    18.340] 	ABI class: X.Org ANSI C Emulation, version 0.4
[    18.340] (II) UnloadModule: "vesa"
[    18.340] (II) Unloading vesa
[    18.340] (II) FBDEV(0): FBIOBLANK: Invalid argument (Screen blanking not supported by kernel - disabling)
[    18.341] (==) FBDEV(0): Backing store enabled
[    18.341] (==) FBDEV(0): DPMS enabled
[    18.341] (II) Initializing extension Generic Event Extension
[    18.341] (II) Initializing extension SHAPE
[    18.341] (II) Initializing extension MIT-SHM
[    18.341] (II) Initializing extension XInputExtension
[    18.349] (II) Initializing extension XTEST
[    18.349] (II) Initializing extension BIG-REQUESTS
[    18.349] (II) Initializing extension SYNC
[    18.349] (II) Initializing extension XKEYBOARD
[    18.349] (II) Initializing extension XC-MISC
[    18.349] (II) Initializing extension SECURITY
[    18.349] (II) Initializing extension XFIXES
[    18.349] (II) Initializing extension RENDER
[    18.349] (II) Initializing extension RANDR
[    18.349] (II) Initializing extension COMPOSITE
[    18.349] (II) Initializing extension DAMAGE
[    18.350] (II) Initializing extension MIT-SCREEN-SAVER
[    18.350] (II) Initializing extension DOUBLE-BUFFER
[    18.350] (II) Initializing extension RECORD
[    18.350] (II) Initializing extension DPMS
[    18.350] (II) Initializing extension Present
[    18.350] (II) Initializing extension DRI3
[    18.350] (II) Initializing extension X-Resource
[    18.350] (II) Initializing extension XVideo
[    18.350] (II) Initializing extension XVideo-MotionCompensation
[    18.350] (II) Initializing extension SELinux
[    18.350] (II) SELinux: Disabled on system
[    18.350] (II) Initializing extension GLX
[    18.350] (II) AIGLX: Screen 0 is not DRI2 capable
[    18.703] (II) IGLX: Loaded and initialized swrast
[    18.703] (II) GLX: Initialized DRISWRAST GL provider for screen 0
[    18.703] (II) Initializing extension XFree86-VidModeExtension
[    18.703] (II) Initializing extension XFree86-DGA
[    18.703] (II) Initializing extension XFree86-DRI
[    18.704] (II) Initializing extension DRI2
[    18.767] (II) config/udev: Adding input device Power Button (/dev/input/event2)
[    18.767] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[    18.767] (II) LoadModule: "libinput"
[    18.767] (II) Loading /usr/lib/xorg/modules/input/libinput_drv.so
[    18.789] (II) Module libinput: vendor="X.Org Foundation"
[    18.789] 	compiled for 1.20.1, module version = 0.28.1
[    18.789] 	Module class: X.Org XInput Driver
[    18.789] 	ABI class: X.Org XInput driver, version 24.1
[    18.789] (II) Using input driver 'libinput' for 'Power Button'
[    18.789] (**) Power Button: always reports core events
[    18.789] (**) Option "Device" "/dev/input/event2"
[    18.789] (**) Option "_source" "server/udev"
[    18.789] (II) event2  - Power Button: is tagged by udev as: Keyboard
[    18.789] (II) event2  - Power Button: device is a keyboard
[    18.789] (II) event2  - Power Button: device removed
[    18.821] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input2/event2"
[    18.821] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[    18.821] (**) Option "xkb_model" "pc105"
[    18.821] (**) Option "xkb_layout" "fr"
[    18.821] (**) Option "xkb_variant" "azerty"
[    18.832] (II) event2  - Power Button: is tagged by udev as: Keyboard
[    18.832] (II) event2  - Power Button: device is a keyboard
[    18.832] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[    18.832] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[    18.832] (II) Using input driver 'libinput' for 'Power Button'
[    18.832] (**) Power Button: always reports core events
[    18.832] (**) Option "Device" "/dev/input/event1"
[    18.832] (**) Option "_source" "server/udev"
[    18.832] (II) event1  - Power Button: is tagged by udev as: Keyboard
[    18.832] (II) event1  - Power Button: device is a keyboard
[    18.832] (II) event1  - Power Button: device removed
[    18.861] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1/event1"
[    18.861] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)
[    18.861] (**) Option "xkb_model" "pc105"
[    18.861] (**) Option "xkb_layout" "fr"
[    18.861] (**) Option "xkb_variant" "azerty"
[    18.861] (II) event1  - Power Button: is tagged by udev as: Keyboard
[    18.861] (II) event1  - Power Button: device is a keyboard
[    18.861] (II) config/udev: Adding input device Sleep Button (/dev/input/event0)
[    18.861] (**) Sleep Button: Applying InputClass "libinput keyboard catchall"
[    18.861] (II) Using input driver 'libinput' for 'Sleep Button'
[    18.861] (**) Sleep Button: always reports core events
[    18.861] (**) Option "Device" "/dev/input/event0"
[    18.861] (**) Option "_source" "server/udev"
[    18.862] (II) event0  - Sleep Button: is tagged by udev as: Keyboard
[    18.862] (II) event0  - Sleep Button: device is a keyboard
[    18.862] (II) event0  - Sleep Button: device removed
[    18.877] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input0/event0"
[    18.877] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 8)
[    18.877] (**) Option "xkb_model" "pc105"
[    18.877] (**) Option "xkb_layout" "fr"
[    18.877] (**) Option "xkb_variant" "azerty"
[    18.877] (II) event0  - Sleep Button: is tagged by udev as: Keyboard
[    18.877] (II) event0  - Sleep Button: device is a keyboard
[    18.878] (II) config/udev: Adding input device NOVATEK USB Keyboard (/dev/input/event4)
[    18.878] (**) NOVATEK USB Keyboard: Applying InputClass "libinput keyboard catchall"
[    18.878] (II) Using input driver 'libinput' for 'NOVATEK USB Keyboard'
[    18.878] (**) NOVATEK USB Keyboard: always reports core events
[    18.878] (**) Option "Device" "/dev/input/event4"
[    18.878] (**) Option "_source" "server/udev"
[    18.878] (II) event4  - NOVATEK USB Keyboard: is tagged by udev as: Keyboard
[    18.878] (II) event4  - NOVATEK USB Keyboard: device is a keyboard
[    18.878] (II) event4  - NOVATEK USB Keyboard: device removed
[    18.901] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-10/1-10:1.0/0003:0461:0010.0002/input/input4/event4"
[    18.901] (II) XINPUT: Adding extended input device "NOVATEK USB Keyboard" (type: KEYBOARD, id 9)
[    18.901] (**) Option "xkb_model" "pc105"
[    18.901] (**) Option "xkb_layout" "fr"
[    18.901] (**) Option "xkb_variant" "azerty"
[    18.901] (II) event4  - NOVATEK USB Keyboard: is tagged by udev as: Keyboard
[    18.901] (II) event4  - NOVATEK USB Keyboard: device is a keyboard
[    18.902] (II) config/udev: Adding input device NOVATEK USB Keyboard System Control (/dev/input/event5)
[    18.902] (**) NOVATEK USB Keyboard System Control: Applying InputClass "libinput keyboard catchall"
[    18.902] (II) Using input driver 'libinput' for 'NOVATEK USB Keyboard System Control'
[    18.902] (**) NOVATEK USB Keyboard System Control: always reports core events
[    18.902] (**) Option "Device" "/dev/input/event5"
[    18.902] (**) Option "_source" "server/udev"
[    18.902] (II) event5  - NOVATEK USB Keyboard System Control: is tagged by udev as: Keyboard
[    18.902] (II) event5  - NOVATEK USB Keyboard System Control: device is a keyboard
[    18.902] (II) event5  - NOVATEK USB Keyboard System Control: device removed
[    18.917] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-10/1-10:1.1/0003:0461:0010.0003/input/input5/event5"
[    18.917] (II) XINPUT: Adding extended input device "NOVATEK USB Keyboard System Control" (type: KEYBOARD, id 10)
[    18.917] (**) Option "xkb_model" "pc105"
[    18.917] (**) Option "xkb_layout" "fr"
[    18.917] (**) Option "xkb_variant" "azerty"
[    18.917] (II) event5  - NOVATEK USB Keyboard System Control: is tagged by udev as: Keyboard
[    18.917] (II) event5  - NOVATEK USB Keyboard System Control: device is a keyboard
[    18.918] (II) config/udev: Adding input device NOVATEK USB Keyboard Consumer Control (/dev/input/event6)
[    18.918] (**) NOVATEK USB Keyboard Consumer Control: Applying InputClass "libinput keyboard catchall"
[    18.918] (II) Using input driver 'libinput' for 'NOVATEK USB Keyboard Consumer Control'
[    18.918] (**) NOVATEK USB Keyboard Consumer Control: always reports core events
[    18.918] (**) Option "Device" "/dev/input/event6"
[    18.918] (**) Option "_source" "server/udev"
[    18.918] (II) event6  - NOVATEK USB Keyboard Consumer Control: is tagged by udev as: Keyboard
[    18.918] (II) event6  - NOVATEK USB Keyboard Consumer Control: device is a keyboard
[    18.918] (II) event6  - NOVATEK USB Keyboard Consumer Control: device removed
[    18.941] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-10/1-10:1.1/0003:0461:0010.0003/input/input6/event6"
[    18.941] (II) XINPUT: Adding extended input device "NOVATEK USB Keyboard Consumer Control" (type: KEYBOARD, id 11)
[    18.941] (**) Option "xkb_model" "pc105"
[    18.941] (**) Option "xkb_layout" "fr"
[    18.941] (**) Option "xkb_variant" "azerty"
[    18.941] (II) event6  - NOVATEK USB Keyboard Consumer Control: is tagged by udev as: Keyboard
[    18.941] (II) event6  - NOVATEK USB Keyboard Consumer Control: device is a keyboard
[    18.942] (II) config/udev: Adding input device PixArt USB Optical Mouse (/dev/input/event3)
[    18.942] (**) PixArt USB Optical Mouse: Applying InputClass "libinput pointer catchall"
[    18.942] (II) Using input driver 'libinput' for 'PixArt USB Optical Mouse'
[    18.942] (**) PixArt USB Optical Mouse: always reports core events
[    18.942] (**) Option "Device" "/dev/input/event3"
[    18.942] (**) Option "_source" "server/udev"
[    18.942] (II) event3  - PixArt USB Optical Mouse: is tagged by udev as: Mouse
[    18.942] (II) event3  - PixArt USB Optical Mouse: device is a pointer
[    18.942] (II) event3  - PixArt USB Optical Mouse: device removed
[    18.973] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-9/1-9:1.0/0003:0461:4D0F.0001/input/input3/event3"
[    18.973] (II) XINPUT: Adding extended input device "PixArt USB Optical Mouse" (type: MOUSE, id 12)
[    18.973] (**) Option "AccelerationScheme" "none"
[    18.973] (**) PixArt USB Optical Mouse: (accel) selected scheme none/0
[    18.973] (**) PixArt USB Optical Mouse: (accel) acceleration factor: 2.000
[    18.973] (**) PixArt USB Optical Mouse: (accel) acceleration threshold: 4
[    18.973] (II) event3  - PixArt USB Optical Mouse: is tagged by udev as: Mouse
[    18.973] (II) event3  - PixArt USB Optical Mouse: device is a pointer
[    18.974] (II) config/udev: Adding input device PixArt USB Optical Mouse (/dev/input/mouse0)
[    18.974] (II) No input driver specified, ignoring this device.
[    18.974] (II) This device may have been added with another device file.
[    18.975] (II) config/udev: Adding input device HP WMI hotkeys (/dev/input/event7)
[    18.975] (**) HP WMI hotkeys: Applying InputClass "libinput keyboard catchall"
[    18.975] (II) Using input driver 'libinput' for 'HP WMI hotkeys'
[    18.975] (**) HP WMI hotkeys: always reports core events
[    18.975] (**) Option "Device" "/dev/input/event7"
[    18.975] (**) Option "_source" "server/udev"
[    18.975] (II) event7  - HP WMI hotkeys: is tagged by udev as: Keyboard Switch
[    18.975] (II) event7  - HP WMI hotkeys: device is a keyboard
[    18.975] (II) event7  - HP WMI hotkeys: device removed
[    18.997] (**) Option "config_info" "udev:/sys/devices/virtual/input/input7/event7"
[    18.997] (II) XINPUT: Adding extended input device "HP WMI hotkeys" (type: KEYBOARD, id 13)
[    18.997] (**) Option "xkb_model" "pc105"[*][/*]
[    18.997] (**) Option "xkb_layout" "fr"
[    18.997] (**) Option "xkb_variant" "azerty"
[    18.997] (II) event7  - HP WMI hotkeys: is tagged by udev as: Keyboard Switch
[    18.997] (II) event7  - HP WMI hotkeys: device is a keyboard
[    70.751] (II) config/udev: Adding input device HDA Intel PCH Line (/dev/input/event9)
[    70.751] (II) No input driver specified, ignoring this device.
[    70.751] (II) This device may have been added with another device file.
[    70.752] (II) config/udev: Adding input device HDA Intel PCH Front Headphone (/dev/input/event11)
[    70.752] (II) No input driver specified, ignoring this device.
[    70.752] (II) This device may have been added with another device file.
[    70.753] (II) config/udev: Adding input device HDA Intel PCH Line Out (/dev/input/event10)
[    70.753] (II) No input driver specified, ignoring this device.
[    70.753] (II) This device may have been added with another device file.
[    70.755] (II) config/udev: Adding input device HDA Intel PCH Mic (/dev/input/event8)
[    70.755] (II) No input driver specified, ignoring this device.
[    70.755] (II) This device may have been added with another device file.

Je suis sous Xubuntu 18.04, ma config :
[*]Intel(R) Core(TM) i5-6400 CPU @ 2.70GHz
Intel Corporation HD Graphics 530
Radeon R5 M320 (mais non ce n'est pas un PC portable, je sais c'est étrange mais sur Win10 ça ne posait pas de problème)[/*]

Comme vous pourrez le constater j'ai donc un systrème de GPU hybride entre l'intégré et le dédié. (Je suis aussi en dual boot avec Win10, je précise au cas-où)

Durant mes 4 jours de recherches vaines, j'ai essayé diverses solution :
[*]Installer le PPA oibaf/graphics-drivers puis update + upgrade
Les options i915.alpa_support=1 ainsi que i915.modeset=1
Ajouter "i915" au fichier /etc/modules-load.d/modules.conf
Désactiver le Secure Boot
Et peut-être d'autres que j'ai oublier entre temps...[/*]

J'ai du finir par faire une réinstallation complète de mon Xubuntu 18.04 car j'avais fini par faire une modification ayant cassé l'OS (je suis un géni, je sais je sais x) ), et évidemment j'ai toujours le même problème.

Je vous remercie ne serait-ce que pour avoir lu ce post jusqu'au bout, je suis vraiment dans la galère, n'hésitez pas à le mentionner si j'ai oublié des infos importantes, j'espère vraiment que je finirai par trouver une solution.

J'ai peut-être mal effectué certaines manips' la première fois, donc je ne suis pas contre d'en réessayer certaines s'il y a des doutes.

Merci d'avance !

Dernière modification par Detork (Le 12/10/2019, à 09:11)

Hors ligne

#2 Le 11/10/2019, à 23:30

geole

Re : [Résolu -> problème HDMI] Black screen si je n'utilise pas nomodeset

Bonsoir
Peux-tu regarder si un pilote propriétaire est disponible pour installation ?
https://doc.ubuntu-fr.org/gestionnaire_ … prietaires
S'il y en a un, après installation tu pourras enlever l'option nomodeset

Les grilles de l'installateur https://doc.ubuntu-fr.org/tutoriel/inst … _subiquity
"gedit admin:///etc/fstab" est proscrit,  utilisez "pkexec env DISPLAY=$DISPLAY XAUTHORITY=$XAUTHORITY xdg-open /etc/fstab" Voir  https://doc.ubuntu-fr.org/gedit
Les partitions EXT4 des disques externes => https://forum.ubuntu-fr.org/viewtopic.p … #p22697248

Hors ligne

#3 Le 12/10/2019, à 09:09

Detork

Re : [Résolu -> problème HDMI] Black screen si je n'utilise pas nomodeset

Bonjour, mon problème est résolu.

En me baladant sur ce forum, je suis tombé sur ce post, où la personne a exactement le même problème que moi.
J'ai retiré le câble fourni avec mon écran pour utilisé celui fourni avec ma Wii U et tout a fonctionné. Je crois bien que ces deux câbles étaient de deux versions différentes et que l'une d'entre elles n'est pas supporté par Ubuntu, mais tout ce que je sais c'est que le câble HDMI fourni avec la Wii U serait en 1.3 ou 1.4 (difficile à déterminer).

Merci quand même pour ton aide, je vais marquer le sujet en Résolu si cela est possible.

Hors ligne

Pages : 1