(résolu) Quelques problèmes avec ubuntu 18.04 sur Dell D630

xubu1957 · Le 21/10/2019, à 22:02

C'était pour voir les pilotes wifi !

_ _ _

Montre aussi :

iwconfig

Dernière modification par xubu1957 (Le 21/10/2019, à 22:04)

agu · Le 22/10/2019, à 11:41

démarrage avec Wifi activé:
lors du défilement des actions de démarrages, il y a quelques petites "hésitations".
Quand apparaît la ligne "started user manager for UID 1000", plus rien ne bouge pendant 1 '5", puis apparaît la flèche de la souris, puis 35" d'immobilisme et ensuite l'interface graphique apparaît.

Voici les résultats des 2 commandes demandées par XUBU1957

lspci -nnk | grep 0280 -A3
0c:00.0 Network controller [0280]: Broadcom Inc. and subsidiaries BCM4311 802.11a/b/g [14e4:4312] (rev 01)
	Subsystem: Dell Wireless 1490 Dual Band WLAN Mini-Card [1028:0007]
	Kernel driver in use: b43-pci-bridge
	Kernel modules: ssb

lsmod | grep cfg80211
cfg80211 679936 2 b43,mac80211

xubu1957 · Le 22/10/2019, à 11:49

Donne aussi :

cat /etc/modprobe.d/* | egrep 'bcm'

commande indiquée dans >askubuntu.com/questions/55868/installing-broadcom-wireless-drivers/60395#60395

moko138 · Le 22/10/2019, à 11:49

nany a écrit :

Bon, c’est le module WiFi qui met du temps à se charger avant de donner la main.
Je ne sais pas quoi faire pour améliorer la chose

Désactiver le lancement au démarrage des services qui nécessitent le réseau.

agu · Le 22/10/2019, à 12:03

cat /etc/modprobe.d/* | egrep 'bcm'
blacklist bcm43xx

nany · Le 22/10/2019, à 12:11

Donne le retour de :

sudo sed -i 's/^\(blacklist bcm43xx\)/# \1/' /etc/modprobe.d/blacklist.conf && grep 'bcm' /etc/modprobe.d/*

Dernière modification par nany (Le 22/10/2019, à 12:32)

agu · Le 22/10/2019, à 12:31

sudo sed -i 's/^\(blacklist bcm43xx\)/# \1/' /etc/modprobe.d/blaclist.conf && grep 'bcm' /etc/modprobe.d/*
[sudo] Mot de passe de gullentops : 
sed: impossible de lire /etc/modprobe.d/blaclist.conf: Aucun fichier ou dossier de ce type

ceci avec connexion filaire ! je suppose que vous voulez voir en Wifi, donc, je redémarre !

nany · Le 22/10/2019, à 12:33

Oups ! j’ai fait une coquille, c’est :

sudo sed -i 's/^\(blacklist bcm43xx\)/# \1/' /etc/modprobe.d/blacklist.conf && grep 'bcm' /etc/modprobe.d/*

agu · Le 22/10/2019, à 12:50

et voilà la réponse avec le Wifi activé et le câble débranché !

sudo sed -i 's/^\(blacklist bcm43xx\)/# \1/' /etc/modprobe.d/blacklist.conf && grep 'bcm' /etc/modprobe.d/*
/etc/modprobe.d/blacklist.conf:# blacklist bcm43xx

je ne trouve pas de coquille enfin de différence entre les lignes que vous avez envoyées , parce que pour trouver la coquille, j'en suis loin !

nany · Le 22/10/2019, à 12:56

agu a écrit :

je ne trouve pas de coquille enfin de différence entre les lignes que vous avez envoyées , parce que pour trouver la coquille, j'en suis loin !

C’est normal, j’ai corrigé aussi dans le premier message.

Bien, maintenant redémarre avec le WiFi activé pour voir si ça dure encore trois minutes et donne juste après le retour de :

dmesg

agu · Le 22/10/2019, à 13:25

démarrage avec wifi; 3'10"

gullentops@Latitude-D630-ubuntu:~$ dmesg
[    0.000000] microcode: microcode updated early to revision 0xa4, date = 2010-10-02
[    0.000000] Linux version 5.0.0-31-generic (buildd@lgw01-amd64-046) (gcc version 7.4.0 (Ubuntu 7.4.0-1ubuntu1~18.04.1)) #33~18.04.1-Ubuntu SMP Tue Oct 1 10:20:39 UTC 2019 (Ubuntu 5.0.0-31.33~18.04.1-generic 5.0.21)
[    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-5.0.0-31-generic root=UUID=9ab1b663-d161-4020-8246-90baa9944e6b ro video=SVIDEO-1:d
[    0.000000] KERNEL supported cpus:
[    0.000000]   Intel GenuineIntel
[    0.000000]   AMD AuthenticAMD
[    0.000000]   Hygon HygonGenuine
[    0.000000]   Centaur CentaurHauls
[    0.000000] x86/fpu: x87 FPU will use FXSAVE
[    0.000000] BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009efff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009f000-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000bf65a7ff] usable
[    0.000000] BIOS-e820: [mem 0x00000000bf65a800-0x00000000bfffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec0ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed18000-0x00000000fed1bfff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed20000-0x00000000fed8ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000feda0000-0x00000000feda5fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee0ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ffe00000-0x00000000ffffffff] reserved
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] SMBIOS 2.4 present.
[    0.000000] DMI: Dell Inc. Latitude D630                   /0KU184, BIOS A17 01/04/2010
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.000000] tsc: Detected 1994.467 MHz processor
[    0.005020] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.005022] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.005029] last_pfn = 0xbf65a max_arch_pfn = 0x400000000
[    0.005037] MTRR default type: uncachable
[    0.005038] MTRR fixed ranges enabled:
[    0.005040]   00000-9FFFF write-back
[    0.005041]   A0000-BFFFF uncachable
[    0.005043]   C0000-CFFFF write-protect
[    0.005044]   D0000-EFFFF uncachable
[    0.005045]   F0000-FFFFF write-protect
[    0.005046] MTRR variable ranges enabled:
[    0.005048]   0 base 000000000 mask F80000000 write-back
[    0.005050]   1 base 080000000 mask FC0000000 write-back
[    0.005051]   2 base 0BF800000 mask FFF800000 uncachable
[    0.005053]   3 base 0BF700000 mask FFFF00000 uncachable
[    0.005054]   4 disabled
[    0.005055]   5 disabled
[    0.005055]   6 disabled
[    0.005056]   7 disabled
[    0.005761] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WP  UC- WT  
[    0.006136] total RAM covered: 3063M
[    0.006539] Found optimal setting for mtrr clean up
[    0.006541]  gran_size: 64K 	chunk_size: 16M 	num_reg: 4  	lose cover RAM: 0G
[    0.042262] check: Scanning 1 areas for low memory corruption
[    0.042273] BRK [0x6fe01000, 0x6fe01fff] PGTABLE
[    0.042277] BRK [0x6fe02000, 0x6fe02fff] PGTABLE
[    0.042278] BRK [0x6fe03000, 0x6fe03fff] PGTABLE
[    0.042329] BRK [0x6fe04000, 0x6fe04fff] PGTABLE
[    0.042332] BRK [0x6fe05000, 0x6fe05fff] PGTABLE
[    0.042556] BRK [0x6fe06000, 0x6fe06fff] PGTABLE
[    0.042612] RAMDISK: [mem 0x3331f000-0x35986fff]
[    0.042625] ACPI: Early table checksum verification disabled
[    0.047828] ACPI: RSDP 0x00000000000FBB10 000024 (v02 DELL  )
[    0.047833] ACPI: XSDT 0x00000000BF65D200 000064 (v01 DELL   M08      27DA0104 ASL  00000061)
[    0.047843] ACPI: FACP 0x00000000BF65D09C 0000F4 (v04 DELL   M08      27DA0104 ASL  00000061)
[    0.047852] ACPI: DSDT 0x00000000BF65D800 006114 (v02 INT430 SYSFexxx 00001001 INTL 20050624)
[    0.047857] ACPI: FACS 0x00000000BF66C000 000040
[    0.047862] ACPI: FACS 0x00000000BF66C000 000040
[    0.047866] ACPI: HPET 0x00000000BF65D300 000038 (v01 DELL   M08      00000001 ASL  00000061)
[    0.047872] ACPI: APIC 0x00000000BF65D400 000068 (v01 DELL   M08      27DA0104 ASL  00000047)
[    0.047877] ACPI: ASF! 0x00000000BF65D000 00007E (v32 DELL   M08      27DA0104 ASL  00000061)
[    0.047883] ACPI: MCFG 0x00000000BF65D3C0 00003E (v16 DELL   M08      27DA0104 ASL  00000061)
[    0.047888] ACPI: TCPA 0x00000000BF65D700 000032 (v01                 00000000 ASL  00000000)
[    0.047894] ACPI: SLIC 0x00000000BF65D49C 000176 (v01 DELL   M08      27DA0104 ASL  00000061)
[    0.047899] ACPI: SSDT 0x00000000BF65B9C0 0004CC (v01 PmRef  CpuPm    00003000 INTL 20050624)
[    0.047916] ACPI: Local APIC address 0xfee00000
[    0.048043] No NUMA configuration found
[    0.048046] Faking a node at [mem 0x0000000000000000-0x00000000bf659fff]
[    0.048061] NODE_DATA(0) allocated [mem 0xbf62f000-0xbf659fff]
[    0.048459] Zone ranges:
[    0.048460]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.048463]   DMA32    [mem 0x0000000001000000-0x00000000bf659fff]
[    0.048465]   Normal   empty
[    0.048467]   Device   empty
[    0.048468] Movable zone start for each node
[    0.048472] Early memory node ranges
[    0.048474]   node   0: [mem 0x0000000000001000-0x000000000009efff]
[    0.048476]   node   0: [mem 0x0000000000100000-0x00000000bf659fff]
[    0.048481] Zeroed struct page in unavailable ranges: 98 pages
[    0.048482] Initmem setup node 0 [mem 0x0000000000001000-0x00000000bf659fff]
[    0.048485] On node 0 totalpages: 783864
[    0.048486]   DMA zone: 64 pages used for memmap
[    0.048487]   DMA zone: 21 pages reserved
[    0.048489]   DMA zone: 3998 pages, LIFO batch:0
[    0.048642]   DMA32 zone: 12186 pages used for memmap
[    0.048644]   DMA32 zone: 779866 pages, LIFO batch:63
[    0.088174] Reserving Intel graphics memory at [mem 0xbf800000-0xbfffffff]
[    0.088426] ACPI: PM-Timer IO Port: 0x1008
[    0.088430] ACPI: Local APIC address 0xfee00000
[    0.088445] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[    0.088447] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[    0.088462] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[    0.088465] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.088468] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.088471] ACPI: IRQ0 used by override.
[    0.088472] ACPI: IRQ9 used by override.
[    0.088476] Using ACPI (MADT) for SMP configuration information
[    0.088478] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.088489] smpboot: Allowing 2 CPUs, 0 hotplug CPUs
[    0.088510] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.088512] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[    0.088514] PM: Registered nosave memory: [mem 0x000a0000-0x000fffff]
[    0.088517] [mem 0xc0000000-0xf7ffffff] available for PCI devices
[    0.088520] Booting paravirtualized kernel on bare hardware
[    0.088526] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[    0.088543] random: get_random_bytes called from start_kernel+0x97/0x516 with crng_init=0
[    0.088553] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:2 nr_cpu_ids:2 nr_node_ids:1
[    0.090078] percpu: Embedded 47 pages/cpu s155648 r8192 d28672 u1048576
[    0.090088] pcpu-alloc: s155648 r8192 d28672 u1048576 alloc=1*2097152
[    0.090090] pcpu-alloc: [0] 0 1 
[    0.090129] Built 1 zonelists, mobility grouping on.  Total pages: 771593
[    0.090132] Policy zone: DMA32
[    0.090135] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-5.0.0-31-generic root=UUID=9ab1b663-d161-4020-8246-90baa9944e6b ro video=SVIDEO-1:d
[    0.090297] Calgary: detecting Calgary via BIOS EBDA area
[    0.090299] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[    0.133288] Memory: 3013464K/3135456K available (14339K kernel code, 2335K rwdata, 4404K rodata, 2588K init, 5192K bss, 121992K reserved, 0K cma-reserved)
[    0.133537] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[    0.133553] Kernel/User page tables isolation: enabled
[    0.133593] ftrace: allocating 41614 entries in 163 pages
[    0.163733] rcu: Hierarchical RCU implementation.
[    0.163737] rcu: 	RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=2.
[    0.163739] 	Tasks RCU enabled.
[    0.163740] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
[    0.163742] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
[    0.168327] NR_IRQS: 524544, nr_irqs: 440, preallocated irqs: 16
[    0.168578] Console: colour dummy device 80x25
[    0.168789] printk: console [tty0] enabled
[    0.168820] ACPI: Core revision 20181213
[    0.169053] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[    0.169070] hpet clockevent registered
[    0.169077] APIC: Switch to symmetric I/O mode setup
[    0.169546] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.189076] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x397f86b19be, max_idle_ns: 881590573991 ns
[    0.189098] Calibrating delay loop (skipped), value calculated using timer frequency.. 3988.93 BogoMIPS (lpj=7977868)
[    0.189105] pid_max: default: 32768 minimum: 301
[    0.189158] LSM: Security Framework initializing
[    0.189179] Yama: becoming mindful.
[    0.189206] AppArmor: AppArmor initialized
[    0.191804] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[    0.193428] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[    0.193540] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
[    0.193595] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
[    0.194030] mce: CPU0: Thermal monitoring enabled (TM2)
[    0.194037] process: using mwait in idle threads
[    0.194045] Last level iTLB entries: 4KB 128, 2MB 4, 4MB 4
[    0.194049] Last level dTLB entries: 4KB 256, 2MB 0, 4MB 32, 1GB 0
[    0.194053] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
[    0.194058] Spectre V2 : Mitigation: Full generic retpoline
[    0.194061] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[    0.194065] Speculative Store Bypass: Vulnerable
[    0.194112] MDS: Vulnerable: Clear CPU buffers attempted, no microcode
[    0.194333] Freeing SMP alternatives memory: 36K
[    0.307824] smpboot: CPU0: Intel(R) Core(TM)2 Duo CPU     T7250  @ 2.00GHz (family: 0x6, model: 0xf, stepping: 0xd)
[    0.308041] Performance Events: PEBS fmt0+, Core2 events, 4-deep LBR, Intel PMU driver.
[    0.308054] core: PEBS disabled due to CPU errata
[    0.308059] ... version:                2
[    0.308062] ... bit width:              40
[    0.308065] ... generic registers:      2
[    0.308068] ... value mask:             000000ffffffffff
[    0.308071] ... max period:             000000007fffffff
[    0.308074] ... fixed-purpose events:   3
[    0.308077] ... event mask:             0000000700000003
[    0.308145] rcu: Hierarchical SRCU implementation.
[    0.309081] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[    0.309081] smp: Bringing up secondary CPUs ...
[    0.309081] x86: Booting SMP configuration:
[    0.309081] .... node  #0, CPUs:      #1
[    0.309169] smp: Brought up 1 node, 2 CPUs
[    0.309169] smpboot: Max logical packages: 1
[    0.309169] smpboot: Total of 2 processors activated (7977.86 BogoMIPS)
[    0.310549] devtmpfs: initialized
[    0.310549] x86/mm: Memory block size: 128MB
[    0.310549] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[    0.310549] futex hash table entries: 512 (order: 3, 32768 bytes)
[    0.313134] pinctrl core: initialized pinctrl subsystem
[    0.313313] RTC time: 11:19:08, date: 2019-10-22
[    0.313492] NET: Registered protocol family 16
[    0.313631] audit: initializing netlink subsys (disabled)
[    0.313644] audit: type=2000 audit(1571743148.144:1): state=initialized audit_enabled=0 res=1
[    0.313644] EISA bus registered
[    0.313644] cpuidle: using governor ladder
[    0.313644] cpuidle: using governor menu
[    0.313644] ACPI: bus type PCI registered
[    0.313644] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.313644] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[    0.313644] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
[    0.313644] PCI: Using configuration type 1 for base access
[    0.315529] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[    0.315529] ACPI: Added _OSI(Module Device)
[    0.315529] ACPI: Added _OSI(Processor Device)
[    0.315529] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.315529] ACPI: Added _OSI(Processor Aggregator Device)
[    0.315529] ACPI: Added _OSI(Linux-Dell-Video)
[    0.315529] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
[    0.315529] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics)
[    0.323151] ACPI: 2 ACPI AML tables successfully acquired and loaded
[    0.337267] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
[    0.342912] ACPI: Dynamic OEM Table Load:
[    0.342922] ACPI: SSDT 0xFFFF95B2BB14D7E0 000043 (v01 LMPWR  DELLLOM  00001001 INTL 20050624)
[    0.343529] ACPI: Dynamic OEM Table Load:
[    0.343538] ACPI: SSDT 0xFFFF95B2BB18FC00 000286 (v01 PmRef  Cpu0Ist  00003000 INTL 20050624)
[    0.344085] ACPI: Dynamic OEM Table Load:
[    0.344094] ACPI: SSDT 0xFFFF95B2BB072000 0005E5 (v01 PmRef  Cpu0Cst  00003001 INTL 20050624)
[    0.344911] ACPI: Dynamic OEM Table Load:
[    0.344920] ACPI: SSDT 0xFFFF95B2BB163000 0000C4 (v01 PmRef  Cpu1Ist  00003000 INTL 20050624)
[    0.345205] ACPI: Dynamic OEM Table Load:
[    0.345213] ACPI: SSDT 0xFFFF95B2BB15C840 000085 (v01 PmRef  Cpu1Cst  00003000 INTL 20050624)
[    0.345916] ACPI: Interpreter enabled
[    0.345944] ACPI: (supports S0 S3 S4 S5)
[    0.345948] ACPI: Using IOAPIC for interrupt routing
[    0.345987] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.346349] ACPI: Enabled 13 GPEs in block 00 to 1F
[    0.398492] acpi PNP0C15:00: ACPI dock station (docks/bays count: 1)
[    0.431918] acpi LNXIOBAY:00: ACPI dock station (docks/bays count: 2)
[    0.433028] acpi LNXIOBAY:01: ACPI dock station (docks/bays count: 3)
[    0.474666] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.474678] acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[    0.474701] acpi PNP0A03:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
[    0.489188] PCI host bridge to bus 0000:00
[    0.489195] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    0.489199] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.489204] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.489209] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000dffff window]
[    0.489214] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xf7ffffff window]
[    0.489218] pci_bus 0000:00: root bus resource [mem 0xfc000000-0xfebfffff window]
[    0.489223] pci_bus 0000:00: root bus resource [mem 0xfec10000-0xfecfffff window]
[    0.489228] pci_bus 0000:00: root bus resource [mem 0xfed1c000-0xfed1ffff window]
[    0.489233] pci_bus 0000:00: root bus resource [mem 0xfed90000-0xfed9ffff window]
[    0.489238] pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed44fff window]
[    0.489243] pci_bus 0000:00: root bus resource [mem 0xfeda7000-0xfedfffff window]
[    0.489248] pci_bus 0000:00: root bus resource [mem 0xfee10000-0xff9fffff window]
[    0.489253] pci_bus 0000:00: root bus resource [mem 0xffc00000-0xffdfffff window]
[    0.489258] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.489271] pci 0000:00:00.0: [8086:2a00] type 00 class 0x060000
[    0.489446] pci 0000:00:02.0: [8086:2a02] type 00 class 0x030000
[    0.489462] pci 0000:00:02.0: reg 0x10: [mem 0xf6e00000-0xf6efffff 64bit]
[    0.489471] pci 0000:00:02.0: reg 0x18: [mem 0xe0000000-0xefffffff 64bit pref]
[    0.489477] pci 0000:00:02.0: reg 0x20: [io  0xefe8-0xefef]
[    0.489637] pci 0000:00:02.1: [8086:2a03] type 00 class 0x038000
[    0.489651] pci 0000:00:02.1: reg 0x10: [mem 0xf6f00000-0xf6ffffff 64bit]
[    0.489863] pci 0000:00:1a.0: [8086:2834] type 00 class 0x0c0300
[    0.489928] pci 0000:00:1a.0: reg 0x20: [io  0x6f20-0x6f3f]
[    0.490099] pci 0000:00:1a.1: [8086:2835] type 00 class 0x0c0300
[    0.490164] pci 0000:00:1a.1: reg 0x20: [io  0x6f00-0x6f1f]
[    0.490345] pci 0000:00:1a.7: [8086:283a] type 00 class 0x0c0320
[    0.490374] pci 0000:00:1a.7: reg 0x10: [mem 0xfed1c400-0xfed1c7ff]
[    0.490484] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
[    0.490643] pci 0000:00:1b.0: [8086:284b] type 00 class 0x040300
[    0.490677] pci 0000:00:1b.0: reg 0x10: [mem 0xf6dfc000-0xf6dfffff 64bit]
[    0.490800] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.490970] pci 0000:00:1c.0: [8086:283f] type 01 class 0x060400
[    0.491105] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.491280] pci 0000:00:1c.1: [8086:2841] type 01 class 0x060400
[    0.491414] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[    0.491592] pci 0000:00:1c.5: [8086:2849] type 01 class 0x060400
[    0.491726] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
[    0.491896] pci 0000:00:1d.0: [8086:2830] type 00 class 0x0c0300
[    0.491961] pci 0000:00:1d.0: reg 0x20: [io  0x6f80-0x6f9f]
[    0.492131] pci 0000:00:1d.1: [8086:2831] type 00 class 0x0c0300
[    0.492196] pci 0000:00:1d.1: reg 0x20: [io  0x6f60-0x6f7f]
[    0.492367] pci 0000:00:1d.2: [8086:2832] type 00 class 0x0c0300
[    0.492432] pci 0000:00:1d.2: reg 0x20: [io  0x6f40-0x6f5f]
[    0.492618] pci 0000:00:1d.7: [8086:2836] type 00 class 0x0c0320
[    0.492647] pci 0000:00:1d.7: reg 0x10: [mem 0xfed1c000-0xfed1c3ff]
[    0.492757] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[    0.492906] pci 0000:00:1e.0: [8086:2448] type 01 class 0x060401
[    0.493139] pci 0000:00:1f.0: [8086:2815] type 00 class 0x060100
[    0.493266] pci 0000:00:1f.0: quirk: [io  0x1000-0x107f] claimed by ICH6 ACPI/GPIO/TCO
[    0.493276] pci 0000:00:1f.0: quirk: [io  0x1080-0x10bf] claimed by ICH6 GPIO
[    0.493283] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0900 (mask 007f)
[    0.493292] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 3 PIO at 0c80 (mask 003f)
[    0.493471] pci 0000:00:1f.1: [8086:2850] type 00 class 0x01018a
[    0.493495] pci 0000:00:1f.1: reg 0x10: [io  0x01f0-0x01f7]
[    0.493508] pci 0000:00:1f.1: reg 0x14: [io  0x03f4-0x03f7]
[    0.493520] pci 0000:00:1f.1: reg 0x18: [io  0x0170-0x0177]
[    0.493532] pci 0000:00:1f.1: reg 0x1c: [io  0x0374-0x0377]
[    0.493544] pci 0000:00:1f.1: reg 0x20: [io  0x6fa0-0x6faf]
[    0.493571] pci 0000:00:1f.1: legacy IDE quirk: reg 0x10: [io  0x01f0-0x01f7]
[    0.493577] pci 0000:00:1f.1: legacy IDE quirk: reg 0x14: [io  0x03f6]
[    0.493581] pci 0000:00:1f.1: legacy IDE quirk: reg 0x18: [io  0x0170-0x0177]
[    0.493585] pci 0000:00:1f.1: legacy IDE quirk: reg 0x1c: [io  0x0376]
[    0.493731] pci 0000:00:1f.2: [8086:2828] type 00 class 0x01018f
[    0.493757] pci 0000:00:1f.2: reg 0x10: [io  0x6eb0-0x6eb7]
[    0.493770] pci 0000:00:1f.2: reg 0x14: [io  0x6eb8-0x6ebb]
[    0.493782] pci 0000:00:1f.2: reg 0x18: [io  0x6ec0-0x6ec7]
[    0.493794] pci 0000:00:1f.2: reg 0x1c: [io  0x6ec8-0x6ecb]
[    0.493806] pci 0000:00:1f.2: reg 0x20: [io  0x6ee0-0x6eef]
[    0.493819] pci 0000:00:1f.2: reg 0x24: [io  0xeff0-0xefff]
[    0.493869] pci 0000:00:1f.2: PME# supported from D3hot
[    0.494014] pci 0000:00:1f.3: [8086:283e] type 00 class 0x0c0500
[    0.494038] pci 0000:00:1f.3: reg 0x10: [mem 0xf6dfbf00-0xf6dfbfff]
[    0.494081] pci 0000:00:1f.3: reg 0x20: [io  0x10c0-0x10df]
[    0.494319] pci 0000:00:1c.0: PCI bridge to [bus 0b]
[    0.494441] pci 0000:0c:00.0: [14e4:4312] type 00 class 0x028000
[    0.494481] pci 0000:0c:00.0: reg 0x10: [mem 0xf6cfc000-0xf6cfffff]
[    0.494586] pci 0000:0c:00.0: enabling Extended Tags
[    0.494692] pci 0000:0c:00.0: supports D1 D2
[    0.494809] pci 0000:0c:00.0: disabling ASPM on pre-1.1 PCIe device.  You can enable it with 'pcie_aspm=force'
[    0.494829] pci 0000:00:1c.1: PCI bridge to [bus 0c]
[    0.494839] pci 0000:00:1c.1:   bridge window [mem 0xf6c00000-0xf6cfffff]
[    0.494974] pci 0000:09:00.0: [14e4:1673] type 00 class 0x020000
[    0.495026] pci 0000:09:00.0: reg 0x10: [mem 0xf6bf0000-0xf6bfffff 64bit]
[    0.495116] pci 0000:09:00.0: enabling Extended Tags
[    0.495253] pci 0000:09:00.0: PME# supported from D3hot D3cold
[    0.495444] pci 0000:00:1c.5: PCI bridge to [bus 09]
[    0.495455] pci 0000:00:1c.5:   bridge window [mem 0xf6b00000-0xf6bfffff]
[    0.495490] pci_bus 0000:03: extended config space not accessible
[    0.495589] pci 0000:03:01.0: [1217:7135] type 02 class 0x060700
[    0.495613] pci 0000:03:01.0: reg 0x10: [mem 0x00000000-0x00000fff]
[    0.495662] pci 0000:03:01.0: supports D1 D2
[    0.495664] pci 0000:03:01.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.495771] pci 0000:03:01.4: [1217:00f7] type 00 class 0x0c0010
[    0.495794] pci 0000:03:01.4: reg 0x10: [mem 0xf6aff000-0xf6afffff]
[    0.495806] pci 0000:03:01.4: reg 0x14: [mem 0xf6afe800-0xf6afefff]
[    0.495899] pci 0000:03:01.4: supports D1 D2
[    0.495901] pci 0000:03:01.4: PME# supported from D0 D1 D2 D3hot D3cold
[    0.496036] pci 0000:00:1e.0: PCI bridge to [bus 03-04] (subtractive decode)
[    0.496047] pci 0000:00:1e.0:   bridge window [mem 0xf6a00000-0xf6afffff]
[    0.496055] pci 0000:00:1e.0:   bridge window [io  0x0000-0x0cf7 window] (subtractive decode)
[    0.496057] pci 0000:00:1e.0:   bridge window [io  0x0d00-0xffff window] (subtractive decode)
[    0.496059] pci 0000:00:1e.0:   bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
[    0.496061] pci 0000:00:1e.0:   bridge window [mem 0x000d0000-0x000dffff window] (subtractive decode)
[    0.496063] pci 0000:00:1e.0:   bridge window [mem 0xc0000000-0xf7ffffff window] (subtractive decode)
[    0.496065] pci 0000:00:1e.0:   bridge window [mem 0xfc000000-0xfebfffff window] (subtractive decode)
[    0.496067] pci 0000:00:1e.0:   bridge window [mem 0xfec10000-0xfecfffff window] (subtractive decode)
[    0.496069] pci 0000:00:1e.0:   bridge window [mem 0xfed1c000-0xfed1ffff window] (subtractive decode)
[    0.496071] pci 0000:00:1e.0:   bridge window [mem 0xfed90000-0xfed9ffff window] (subtractive decode)
[    0.496073] pci 0000:00:1e.0:   bridge window [mem 0xfed40000-0xfed44fff window] (subtractive decode)
[    0.496075] pci 0000:00:1e.0:   bridge window [mem 0xfeda7000-0xfedfffff window] (subtractive decode)
[    0.496077] pci 0000:00:1e.0:   bridge window [mem 0xfee10000-0xff9fffff window] (subtractive decode)
[    0.496079] pci 0000:00:1e.0:   bridge window [mem 0xffc00000-0xffdfffff window] (subtractive decode)
[    0.496117] pci_bus 0000:04: extended config space not accessible
[    0.496152] pci_bus 0000:04: busn_res: [bus 04] end can not be updated to 07
[    0.496158] pci 0000:00:1e.0: bridge has subordinate 04 but max busn 07
[    0.514408] ACPI: PCI Interrupt Link [LNKA] (IRQs 9 10 *11)
[    0.514576] ACPI: PCI Interrupt Link [LNKB] (IRQs 5 7) *3
[    0.514740] ACPI: PCI Interrupt Link [LNKC] (IRQs 9 *10 11)
[    0.514905] ACPI: PCI Interrupt Link [LNKD] (IRQs 5 7 9 10 *11)
[    0.515071] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
[    0.515239] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
[    0.515406] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
[    0.515552] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
[    0.517416] SCSI subsystem initialized
[    0.517434] libata version 3.00 loaded.
[    0.517434] pci 0000:00:02.0: vgaarb: setting as boot VGA device
[    0.517434] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[    0.517434] pci 0000:00:02.0: vgaarb: bridge control possible
[    0.517434] vgaarb: loaded
[    0.517434] ACPI: bus type USB registered
[    0.517434] usbcore: registered new interface driver usbfs
[    0.517434] usbcore: registered new interface driver hub
[    0.517434] usbcore: registered new device driver usb
[    0.517434] pps_core: LinuxPPS API ver. 1 registered
[    0.517434] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.517434] PTP clock support registered
[    0.517434] EDAC MC: Ver: 3.0.0
[    0.517434] PCI: Using ACPI for IRQ routing
[    0.521086] PCI: pci_cache_line_size set to 64 bytes
[    0.521086] e820: reserve RAM buffer [mem 0x0009f000-0x0009ffff]
[    0.521086] e820: reserve RAM buffer [mem 0xbf65a800-0xbfffffff]
[    0.521091] NetLabel: Initializing
[    0.521091] NetLabel:  domain hash size = 128
[    0.521091] NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
[    0.521091] NetLabel:  unlabeled traffic allowed by default
[    0.521992] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[    0.522006] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[    0.522012] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[    0.524054] clocksource: Switched to clocksource tsc-early
[    0.544813] VFS: Disk quotas dquot_6.6.0
[    0.544852] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.545056] AppArmor: AppArmor Filesystem Enabled
[    0.545112] pnp: PnP ACPI init
[    0.545261] pnp 00:00: Plug and Play ACPI device, IDs PNP0f13 (active)
[    0.545322] pnp 00:01: Plug and Play ACPI device, IDs PNP0303 (active)
[    0.545374] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.545471] system 00:03: [io  0x0c80-0x0caf] has been reserved
[    0.545477] system 00:03: [io  0x0cc0-0x0cff] could not be reserved
[    0.545487] system 00:03: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.545613] system 00:04: [mem 0xfed00000-0xfed003ff] has been reserved
[    0.545624] system 00:04: Plug and Play ACPI device, IDs PNP0103 PNP0c01 (active)
[    0.553822] pnp 00:05: Plug and Play ACPI device, IDs PNP0501 (active)
[    0.590518] system 00:06: [io  0x0cb0-0x0cbb] has been reserved
[    0.590524] system 00:06: [mem 0xfed40000-0xfed44fff] has been reserved
[    0.590534] system 00:06: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.593499] pnp 00:07: disabling [io  0x1000-0x1005] because it overlaps 0000:00:1f.0 BAR 13 [io  0x1000-0x107f]
[    0.593506] pnp 00:07: disabling [io  0x1008-0x100f] because it overlaps 0000:00:1f.0 BAR 13 [io  0x1000-0x107f]
[    0.593548] system 00:07: [io  0x0900-0x097f] has been reserved
[    0.593554] system 00:07: [io  0x04d0-0x04d1] has been reserved
[    0.593563] system 00:07: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.593604] pnp 00:08: disabling [io  0x1006-0x1007] because it overlaps 0000:00:1f.0 BAR 13 [io  0x1000-0x107f]
[    0.593611] pnp 00:08: disabling [io  0x100a-0x1059] because it overlaps 0000:00:1f.0 BAR 13 [io  0x1000-0x107f]
[    0.593617] pnp 00:08: disabling [io  0x1060-0x107f] because it overlaps 0000:00:1f.0 BAR 13 [io  0x1000-0x107f]
[    0.593623] pnp 00:08: disabling [io  0x1010-0x102f] because it overlaps 0000:00:1f.0 BAR 13 [io  0x1000-0x107f]
[    0.593663] system 00:08: [io  0xf400-0xf4fe] has been reserved
[    0.593669] system 00:08: [io  0x1080-0x10bf] has been reserved
[    0.593673] system 00:08: [io  0x10c0-0x10df] has been reserved
[    0.593678] system 00:08: [io  0x0809] has been reserved
[    0.593691] system 00:08: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.612404] system 00:09: [mem 0x00000000-0x0009efff] could not be reserved
[    0.612411] system 00:09: [mem 0x0009f000-0x0009ffff] could not be reserved
[    0.612416] system 00:09: [mem 0x000c0000-0x000cffff] could not be reserved
[    0.612421] system 00:09: [mem 0x000e0000-0x000fffff] could not be reserved
[    0.612426] system 00:09: [mem 0x00100000-0xbf65a7ff] could not be reserved
[    0.612431] system 00:09: [mem 0xbf65a800-0xbf6fffff] has been reserved
[    0.612435] system 00:09: [mem 0xbf700000-0xbf7fffff] has been reserved
[    0.612440] system 00:09: [mem 0xbf700000-0xbfefffff] could not be reserved
[    0.612446] system 00:09: [mem 0xffe00000-0xffffffff] has been reserved
[    0.612450] system 00:09: [mem 0xffa00000-0xffbfffff] has been reserved
[    0.612455] system 00:09: [mem 0xfec00000-0xfec0ffff] could not be reserved
[    0.612460] system 00:09: [mem 0xfee00000-0xfee0ffff] has been reserved
[    0.612465] system 00:09: [mem 0xfed20000-0xfed3ffff] has been reserved
[    0.612470] system 00:09: [mem 0xfed45000-0xfed8ffff] has been reserved
[    0.612474] system 00:09: [mem 0xfeda0000-0xfeda3fff] has been reserved
[    0.612479] system 00:09: [mem 0xfeda4000-0xfeda4fff] has been reserved
[    0.612484] system 00:09: [mem 0xfeda5000-0xfeda5fff] has been reserved
[    0.612488] system 00:09: [mem 0xfeda6000-0xfeda6fff] has been reserved
[    0.612493] system 00:09: [mem 0xfed18000-0xfed1bfff] has been reserved
[    0.612498] system 00:09: [mem 0xf8000000-0xfbffffff] has been reserved
[    0.612507] system 00:09: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.612594] pnp: PnP ACPI: found 10 devices
[    0.619557] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.619584] pci 0000:00:1c.0: bridge window [io  0x1000-0x0fff] to [bus 0b] add_size 1000
[    0.619587] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 0b] add_size 200000 add_align 100000
[    0.619590] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 0b] add_size 200000 add_align 100000
[    0.619602] pci 0000:00:1c.1: bridge window [io  0x1000-0x0fff] to [bus 0c] add_size 1000
[    0.619605] pci 0000:00:1c.1: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 0c] add_size 200000 add_align 100000
[    0.619616] pci 0000:00:1c.5: bridge window [io  0x1000-0x0fff] to [bus 09] add_size 1000
[    0.619619] pci 0000:00:1c.5: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 09] add_size 200000 add_align 100000
[    0.619639] pci 0000:00:1e.0: bridge window [io  0x1000-0x0fff] to [bus 03-04] add_size 1000
[    0.619655] pci 0000:00:1c.0: BAR 14: assigned [mem 0xc0000000-0xc01fffff]
[    0.619667] pci 0000:00:1c.0: BAR 15: assigned [mem 0xc0200000-0xc03fffff 64bit pref]
[    0.619678] pci 0000:00:1c.1: BAR 15: assigned [mem 0xc0400000-0xc05fffff 64bit pref]
[    0.619689] pci 0000:00:1c.5: BAR 15: assigned [mem 0xc0600000-0xc07fffff 64bit pref]
[    0.619696] pci 0000:00:1c.0: BAR 13: assigned [io  0x2000-0x2fff]
[    0.619701] pci 0000:00:1c.1: BAR 13: assigned [io  0x3000-0x3fff]
[    0.619707] pci 0000:00:1c.5: BAR 13: assigned [io  0x4000-0x4fff]
[    0.619712] pci 0000:00:1e.0: BAR 13: assigned [io  0x5000-0x5fff]
[    0.619719] pci 0000:00:1c.0: PCI bridge to [bus 0b]
[    0.619725] pci 0000:00:1c.0:   bridge window [io  0x2000-0x2fff]
[    0.619734] pci 0000:00:1c.0:   bridge window [mem 0xc0000000-0xc01fffff]
[    0.619741] pci 0000:00:1c.0:   bridge window [mem 0xc0200000-0xc03fffff 64bit pref]
[    0.619753] pci 0000:00:1c.1: PCI bridge to [bus 0c]
[    0.619758] pci 0000:00:1c.1:   bridge window [io  0x3000-0x3fff]
[    0.619767] pci 0000:00:1c.1:   bridge window [mem 0xf6c00000-0xf6cfffff]
[    0.619774] pci 0000:00:1c.1:   bridge window [mem 0xc0400000-0xc05fffff 64bit pref]
[    0.619785] pci 0000:00:1c.5: PCI bridge to [bus 09]
[    0.619790] pci 0000:00:1c.5:   bridge window [io  0x4000-0x4fff]
[    0.619799] pci 0000:00:1c.5:   bridge window [mem 0xf6b00000-0xf6bfffff]
[    0.619806] pci 0000:00:1c.5:   bridge window [mem 0xc0600000-0xc07fffff 64bit pref]
[    0.619821] pci 0000:03:01.0: BAR 0: assigned [mem 0xc4000000-0xc4000fff]
[    0.619831] pci 0000:03:01.0: BAR 15: assigned [mem 0xc8000000-0xcbffffff pref]
[    0.619838] pci 0000:03:01.0: BAR 16: assigned [mem 0xcc000000-0xcfffffff]
[    0.619843] pci 0000:03:01.0: BAR 13: assigned [io  0x5000-0x50ff]
[    0.619847] pci 0000:03:01.0: BAR 14: assigned [io  0x5400-0x54ff]
[    0.619852] pci 0000:03:01.0: CardBus bridge to [bus 04]
[    0.619856] pci 0000:03:01.0:   bridge window [io  0x5000-0x50ff]
[    0.619864] pci 0000:03:01.0:   bridge window [io  0x5400-0x54ff]
[    0.619872] pci 0000:03:01.0:   bridge window [mem 0xc8000000-0xcbffffff pref]
[    0.619880] pci 0000:03:01.0:   bridge window [mem 0xcc000000-0xcfffffff]
[    0.619888] pci 0000:00:1e.0: PCI bridge to [bus 03-04]
[    0.619893] pci 0000:00:1e.0:   bridge window [io  0x5000-0x5fff]
[    0.619902] pci 0000:00:1e.0:   bridge window [mem 0xf6a00000-0xf6afffff]
[    0.619916] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    0.619918] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    0.619920] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.619922] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff window]
[    0.619924] pci_bus 0000:00: resource 8 [mem 0xc0000000-0xf7ffffff window]
[    0.619926] pci_bus 0000:00: resource 9 [mem 0xfc000000-0xfebfffff window]
[    0.619928] pci_bus 0000:00: resource 10 [mem 0xfec10000-0xfecfffff window]
[    0.619930] pci_bus 0000:00: resource 11 [mem 0xfed1c000-0xfed1ffff window]
[    0.619932] pci_bus 0000:00: resource 12 [mem 0xfed90000-0xfed9ffff window]
[    0.619934] pci_bus 0000:00: resource 13 [mem 0xfed40000-0xfed44fff window]
[    0.619935] pci_bus 0000:00: resource 14 [mem 0xfeda7000-0xfedfffff window]
[    0.619937] pci_bus 0000:00: resource 15 [mem 0xfee10000-0xff9fffff window]
[    0.619939] pci_bus 0000:00: resource 16 [mem 0xffc00000-0xffdfffff window]
[    0.619941] pci_bus 0000:0b: resource 0 [io  0x2000-0x2fff]
[    0.619943] pci_bus 0000:0b: resource 1 [mem 0xc0000000-0xc01fffff]
[    0.619945] pci_bus 0000:0b: resource 2 [mem 0xc0200000-0xc03fffff 64bit pref]
[    0.619947] pci_bus 0000:0c: resource 0 [io  0x3000-0x3fff]
[    0.619948] pci_bus 0000:0c: resource 1 [mem 0xf6c00000-0xf6cfffff]
[    0.619950] pci_bus 0000:0c: resource 2 [mem 0xc0400000-0xc05fffff 64bit pref]
[    0.619952] pci_bus 0000:09: resource 0 [io  0x4000-0x4fff]
[    0.619954] pci_bus 0000:09: resource 1 [mem 0xf6b00000-0xf6bfffff]
[    0.619956] pci_bus 0000:09: resource 2 [mem 0xc0600000-0xc07fffff 64bit pref]
[    0.619958] pci_bus 0000:03: resource 0 [io  0x5000-0x5fff]
[    0.619959] pci_bus 0000:03: resource 1 [mem 0xf6a00000-0xf6afffff]
[    0.619961] pci_bus 0000:03: resource 4 [io  0x0000-0x0cf7 window]
[    0.619963] pci_bus 0000:03: resource 5 [io  0x0d00-0xffff window]
[    0.619965] pci_bus 0000:03: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.619967] pci_bus 0000:03: resource 7 [mem 0x000d0000-0x000dffff window]
[    0.619969] pci_bus 0000:03: resource 8 [mem 0xc0000000-0xf7ffffff window]
[    0.619970] pci_bus 0000:03: resource 9 [mem 0xfc000000-0xfebfffff window]
[    0.619972] pci_bus 0000:03: resource 10 [mem 0xfec10000-0xfecfffff window]
[    0.619974] pci_bus 0000:03: resource 11 [mem 0xfed1c000-0xfed1ffff window]
[    0.619976] pci_bus 0000:03: resource 12 [mem 0xfed90000-0xfed9ffff window]
[    0.619978] pci_bus 0000:03: resource 13 [mem 0xfed40000-0xfed44fff window]
[    0.619980] pci_bus 0000:03: resource 14 [mem 0xfeda7000-0xfedfffff window]
[    0.619982] pci_bus 0000:03: resource 15 [mem 0xfee10000-0xff9fffff window]
[    0.619984] pci_bus 0000:03: resource 16 [mem 0xffc00000-0xffdfffff window]
[    0.619986] pci_bus 0000:04: resource 0 [io  0x5000-0x50ff]
[    0.619987] pci_bus 0000:04: resource 1 [io  0x5400-0x54ff]
[    0.619989] pci_bus 0000:04: resource 2 [mem 0xc8000000-0xcbffffff pref]
[    0.619991] pci_bus 0000:04: resource 3 [mem 0xcc000000-0xcfffffff]
[    0.620164] NET: Registered protocol family 2
[    0.620420] tcp_listen_portaddr_hash hash table entries: 2048 (order: 3, 32768 bytes)
[    0.620461] TCP established hash table entries: 32768 (order: 6, 262144 bytes)
[    0.620602] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
[    0.620800] TCP: Hash tables configured (established 32768 bind 32768)
[    0.620872] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[    0.620908] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[    0.621054] NET: Registered protocol family 1
[    0.621068] NET: Registered protocol family 44
[    0.621086] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    0.624017] PCI: CLS 64 bytes, default 64
[    0.624095] Unpacking initramfs...
[    1.424501] Freeing initrd memory: 39328K
[    1.424786] check: Scanning for low memory corruption every 60 seconds
[    1.425784] Initialise system trusted keyrings
[    1.425802] Key type blacklist registered
[    1.425906] workingset: timestamp_bits=36 max_order=20 bucket_order=0
[    1.428727] zbud: loaded
[    1.429446] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    1.429817] fuse init (API version 7.28)
[    1.489498] Key type asymmetric registered
[    1.489508] Asymmetric key parser 'x509' registered
[    1.489535] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 243)
[    1.489592] io scheduler mq-deadline registered
[    1.490737] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[    1.490848] vesafb: mode is 1024x768x32, linelength=4096, pages=0
[    1.490852] vesafb: scrolling: redraw
[    1.490856] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[    1.490877] vesafb: framebuffer at 0xe0000000, mapped to 0x(____ptrval____), using 3072k, total 3072k
[    1.514951] Console: switching to colour frame buffer device 128x48
[    1.539125] fb0: VESA VGA frame buffer device
[    1.539349] intel_idle: does not run on family 6 model 15
[    1.539523] ACPI: AC Adapter [AC] (on-line)
[    1.539807] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0
[    1.540195] ACPI: Lid Switch [LID]
[    1.540407] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
[    1.540796] ACPI: Power Button [PBTN]
[    1.541015] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input2
[    1.541409] ACPI: Sleep Button [SBTN]
[    1.541745] Monitor-Mwait will be used to enter C-1 state
[    1.541754] Monitor-Mwait will be used to enter C-2 state
[    1.541761] Monitor-Mwait will be used to enter C-3 state
[    1.541766] tsc: Marking TSC unstable due to TSC halts in idle
[    1.542109] clocksource: Switched to clocksource hpet
[    1.550458] thermal LNXTHERM:00: registered as thermal_zone0
[    1.550718] ACPI: Thermal Zone [THM] (56 C)
[    1.551035] battery: ACPI: Battery Slot [BAT0] (battery absent)
[    1.551125] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[    1.551367] battery: ACPI: Battery Slot [BAT1] (battery absent)
[    1.572365] 00:05: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[    1.576015] Linux agpgart interface v0.103
[    1.579749] loop: module loaded
[    1.580212] ata_piix 0000:00:1f.1: version 2.13
[    1.581563] scsi host0: ata_piix
[    1.581965] scsi host1: ata_piix
[    1.582180] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x6fa0 irq 14
[    1.582497] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x6fa8 irq 15
[    1.583081] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
[    1.593236] ata2: port disabled--ignoring
[    1.748237] ata1.00: ATAPI: HL-DT-STCD-RW/DVD-ROM GCC-T10N, A104, max UDMA/33
[    1.759762] scsi host2: ata_piix
[    1.770306] scsi host3: ata_piix
[    1.780643] ata3: SATA max UDMA/133 cmd 0x6eb0 ctl 0x6eb8 bmdma 0x6ee0 irq 18
[    1.789055] scsi 0:0:0:0: CD-ROM            HL-DT-ST CDRW/DVD GCCT10N A104 PQ: 0 ANSI: 5
[    1.790977] ata4: SATA max UDMA/133 cmd 0x6ec0 ctl 0x6ec8 bmdma 0x6ee8 irq 18
[    1.812141] libphy: Fixed MDIO Bus: probed
[    1.822561] tun: Universal TUN/TAP device driver, 1.6
[    1.833165] PPP generic driver version 2.4.2
[    1.843690] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.854207] ehci-pci: EHCI PCI platform driver
[    1.864934] ehci-pci 0000:00:1a.7: EHCI Host Controller
[    1.875367] ehci-pci 0000:00:1a.7: new USB bus registered, assigned bus number 1
[    1.885942] ehci-pci 0000:00:1a.7: debug port 1
[    1.900319] ehci-pci 0000:00:1a.7: cache line size of 64 is not supported
[    1.900335] ehci-pci 0000:00:1a.7: irq 22, io mem 0xfed1c400
[    1.929165] ehci-pci 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[    1.929652] sr 0:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray
[    1.939498] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.00
[    1.949859] cdrom: Uniform CD-ROM driver Revision: 3.20
[    1.960356] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.960358] usb usb1: Product: EHCI Host Controller
[    1.971175] sr 0:0:0:0: Attached scsi CD-ROM sr0
[    1.981425] usb usb1: Manufacturer: Linux 5.0.0-31-generic ehci_hcd
[    1.981426] usb usb1: SerialNumber: 0000:00:1a.7
[    1.981598] hub 1-0:1.0: USB hub found
[    1.992145] sr 0:0:0:0: Attached scsi generic sg0 type 5
[    2.002661] hub 1-0:1.0: 4 ports detected
[    2.044363] ehci-pci 0000:00:1d.7: EHCI Host Controller
[    2.054581] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 2
[    2.064736] ehci-pci 0000:00:1d.7: debug port 1
[    2.078508] ehci-pci 0000:00:1d.7: cache line size of 64 is not supported
[    2.078523] ehci-pci 0000:00:1d.7: irq 20, io mem 0xfed1c000
[    2.105298] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[    2.114960] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.00
[    2.124571] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.134170] usb usb2: Product: EHCI Host Controller
[    2.143701] usb usb2: Manufacturer: Linux 5.0.0-31-generic ehci_hcd
[    2.153276] usb usb2: SerialNumber: 0000:00:1d.7
[    2.162949] hub 2-0:1.0: USB hub found
[    2.172351] hub 2-0:1.0: 6 ports detected
[    2.181887] ehci-platform: EHCI generic platform driver
[    2.191179] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    2.200434] ohci-pci: OHCI PCI platform driver
[    2.209579] ohci-platform: OHCI generic platform driver
[    2.218796] uhci_hcd: USB Universal Host Controller Interface driver
[    2.228391] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[    2.237886] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
[    2.247421] uhci_hcd 0000:00:1a.0: detected 2 ports
[    2.256999] uhci_hcd 0000:00:1a.0: irq 20, io base 0x00006f20
[    2.266547] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.00
[    2.276204] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.285776] usb usb3: Product: UHCI Host Controller
[    2.295450] usb usb3: Manufacturer: Linux 5.0.0-31-generic uhci_hcd
[    2.305131] usb usb3: SerialNumber: 0000:00:1a.0
[    2.314809] hub 3-0:1.0: USB hub found
[    2.324138] hub 3-0:1.0: 2 ports detected
[    2.333673] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[    2.342903] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
[    2.352229] uhci_hcd 0000:00:1a.1: detected 2 ports
[    2.361410] uhci_hcd 0000:00:1a.1: irq 21, io base 0x00006f00
[    2.370578] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.00
[    2.379951] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.389321] usb usb4: Product: UHCI Host Controller
[    2.398673] usb usb4: Manufacturer: Linux 5.0.0-31-generic uhci_hcd
[    2.408137] usb usb4: SerialNumber: 0000:00:1a.1
[    2.417775] hub 4-0:1.0: USB hub found
[    2.427069] hub 4-0:1.0: 2 ports detected
[    2.436504] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[    2.445519] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5
[    2.454527] uhci_hcd 0000:00:1d.0: detected 2 ports
[    2.463394] uhci_hcd 0000:00:1d.0: irq 20, io base 0x00006f80
[    2.472269] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.00
[    2.481341] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.490442] usb usb5: Product: UHCI Host Controller
[    2.499492] usb usb5: Manufacturer: Linux 5.0.0-31-generic uhci_hcd
[    2.508603] usb usb5: SerialNumber: 0000:00:1d.0
[    2.517818] hub 5-0:1.0: USB hub found
[    2.526815] hub 5-0:1.0: 2 ports detected
[    2.536072] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[    2.545108] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6
[    2.554294] uhci_hcd 0000:00:1d.1: detected 2 ports
[    2.563282] uhci_hcd 0000:00:1d.1: irq 21, io base 0x00006f60
[    2.572211] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.00
[    2.581275] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.590318] usb usb6: Product: UHCI Host Controller
[    2.599312] usb usb6: Manufacturer: Linux 5.0.0-31-generic uhci_hcd
[    2.608398] usb usb6: SerialNumber: 0000:00:1d.1
[    2.608511] ata3.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    2.617670] hub 6-0:1.0: USB hub found
[    2.626762] ata3.01: SATA link down (SStatus 0 SControl 300)
[    2.635893] hub 6-0:1.0: 2 ports detected
[    2.654656] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[    2.663863] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7
[    2.673148] uhci_hcd 0000:00:1d.2: detected 2 ports
[    2.682339] uhci_hcd 0000:00:1d.2: irq 22, io base 0x00006f40
[    2.691557] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.00
[    2.701047] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.701049] ata3.00: ATA-8: ST9250311CS, SC1D, max UDMA/133
[    2.701051] ata3.00: 488397168 sectors, multi 8: LBA48 NCQ (depth 0/32)
[    2.710361] usb usb7: Product: UHCI Host Controller
[    2.738196] usb usb7: Manufacturer: Linux 5.0.0-31-generic uhci_hcd
[    2.747577] usb usb7: SerialNumber: 0000:00:1d.2
[    2.747591] ata3.00: configured for UDMA/133
[    2.757174] hub 7-0:1.0: USB hub found
[    2.766681] scsi 2:0:0:0: Direct-Access     ATA      ST9250311CS      SC1D PQ: 0 ANSI: 5
[    2.775679] hub 7-0:1.0: 2 ports detected
[    2.775954] i8042: PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[    2.785546] sd 2:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/233 GiB)
[    2.797583] serio: i8042 KBD port at 0x60,0x64 irq 1
[    2.804526] sd 2:0:0:0: Attached scsi generic sg1 type 0
[    2.814186] serio: i8042 AUX port at 0x60,0x64 irq 12
[    2.814362] mousedev: PS/2 mouse device common for all mice
[    2.823873] sd 2:0:0:0: [sda] Write Protect is off
[    2.833719] rtc_cmos 00:02: RTC can wake from S4
[    2.843102] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    2.852940] rtc_cmos 00:02: registered as rtc0
[    2.862461] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    2.872125] rtc_cmos 00:02: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[    2.901765] i2c /dev entries driver
[    2.911924] device-mapper: uevent: version 1.0.3
[    2.921849] usb 5-2: new low-speed USB device number 2 using uhci_hcd
[    2.921987]  sda: sda1
[    2.931858] device-mapper: ioctl: 4.39.0-ioctl (2018-04-03) initialised: dm-devel@redhat.com
[    2.942047] sd 2:0:0:0: [sda] Attached SCSI disk
[    2.951884] platform eisa.0: Probing EISA bus 0
[    2.972113] platform eisa.0: EISA: Cannot allocate resource for mainboard
[    2.972162] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
[    2.982469] platform eisa.0: Cannot allocate resource for EISA slot 1
[    3.003677] platform eisa.0: Cannot allocate resource for EISA slot 2
[    3.014152] platform eisa.0: Cannot allocate resource for EISA slot 3
[    3.024577] platform eisa.0: Cannot allocate resource for EISA slot 4
[    3.034678] platform eisa.0: Cannot allocate resource for EISA slot 5
[    3.044576] platform eisa.0: Cannot allocate resource for EISA slot 6
[    3.054273] platform eisa.0: Cannot allocate resource for EISA slot 7
[    3.063798] platform eisa.0: Cannot allocate resource for EISA slot 8
[    3.073172] platform eisa.0: EISA: Detected 0 cards
[    3.082482] ledtrig-cpu: registered to indicate activity on CPUs
[    3.092137] NET: Registered protocol family 10
[    3.110520] Segment Routing with IPv6
[    3.119755] NET: Registered protocol family 17
[    3.129021] Key type dns_resolver registered
[    3.138441] mce: Using 6 MCE banks
[    3.147525] RAS: Correctable Errors collector initialized.
[    3.156796] microcode: sig=0x6fd, pf=0x80, revision=0xa4
[    3.165960] microcode: Microcode Update Driver: v2.2.
[    3.166227] registered taskstats version 1
[    3.184091] Loading compiled-in X.509 certificates
[    3.192972] ata4.01: failed to resume link (SControl 0)
[    3.201841] ata4.00: SATA link down (SStatus 0 SControl 300)
[    3.210670] ata4.01: SATA link down (SStatus 0 SControl 0)
[    3.219372] usb 5-2: New USB device found, idVendor=093a, idProduct=2510, bcdDevice= 1.00
[    3.222453] Loaded X.509 cert 'Build time autogenerated kernel key: f741e70acbe36b1401547c35fc32f1bcdd446f7a'
[    3.228438] usb 5-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    3.237736] zswap: loaded using pool lzo/zbud
[    3.246969] usb 5-2: Product: USB Optical Mouse
[    3.265173] usb 5-2: Manufacturer: PixArt
[    3.283014] Key type big_key registered
[    3.291734] Key type trusted registered
[    3.301097] random: fast init done
[    3.313196] Key type encrypted registered
[    3.321676] AppArmor: AppArmor sha1 policy hashing enabled
[    3.330213] ima: No TPM chip found, activating TPM-bypass!
[    3.338779] ima: Allocated hash algorithm: sha1
[    3.347380] No architecture policies found
[    3.355812] evm: Initialising EVM extended attributes:
[    3.355813] evm: security.selinux
[    3.355814] evm: security.SMACK64
[    3.355815] evm: security.SMACK64EXEC
[    3.388014] evm: security.SMACK64TRANSMUTE
[    3.395685] evm: security.SMACK64MMAP
[    3.403083] evm: security.apparmor
[    3.410212] evm: security.ima
[    3.417216] evm: security.capability
[    3.424116] evm: HMAC attrs: 0x1
[    3.431359]   Magic number: 7:116:328
[    3.438037] rtc_cmos 00:02: setting system clock to 2019-10-22T11:19:11 UTC (1571743151)
[    3.446251] Unstable clock detected, switching default tracing clock to "global"
               If you want to keep using the local clock, then add:
                 "trace_clock=local"
               on the kernel command line
[    3.478276] Freeing unused decrypted memory: 2040K
[    3.487560] Freeing unused kernel image memory: 2588K
[    3.505173] Write protecting the kernel read-only data: 22528k
[    3.514563] Freeing unused kernel image memory: 2016K
[    3.523529] Freeing unused kernel image memory: 1740K
[    3.550065] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    3.557841] usb 7-1: new full-speed USB device number 2 using uhci_hcd
[    3.565709] x86/mm: Checking user space page tables
[    3.591699] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    3.599652] Run /init as init process
[    3.642224] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[    3.643525] random: udevadm: uninitialized urandom read (16 bytes read)
[    3.650648] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[    3.758205] usb 7-1: New USB device found, idVendor=0b97, idProduct=7761, bcdDevice= 1.10
[    3.766811] usb 7-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    3.776262] hub 7-1:1.0: USB hub found
[    3.791216] hub 7-1:1.0: 4 ports detected
[    3.836577] wmi_bus wmi_bus-PNP0C14:00: WQBC data block query control method not found
[    3.850838] tg3.c:v3.137 (May 11, 2014)
[    3.868040] hidraw: raw HID events driver (C) Jiri Kosina
[    3.881149] ssb: Found chip with id 0x4311, rev 0x01 and package 0x00
[    3.901432] tg3 0000:09:00.0 eth0: Tigon3 [partno(BCM95755m) rev a002] (PCI Express) MAC address 00:21:70:ba:da:dd
[    3.910225] tg3 0000:09:00.0 eth0: attached PHY is 5755 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[0])
[    3.919084] tg3 0000:09:00.0 eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
[    3.928109] tg3 0000:09:00.0 eth0: dma_rwctrl[76180000] dma_mask[64-bit]
[    3.946628] usbcore: registered new interface driver usbhid
[    3.955783] usbhid: USB HID core driver
[    3.997187] firewire_ohci 0000:03:01.4: added OHCI v1.10 device as card 0, 8 IR + 8 IT contexts, quirks 0x10
[    4.007736] tg3 0000:09:00.0 enp9s0: renamed from eth0
[    4.017922] input: PixArt USB Optical Mouse as /devices/pci0000:00/0000:00:1d.0/usb5/5-2/5-2:1.0/0003:093A:2510.0001/input/input6
[    4.038034] hid-generic 0003:093A:2510.0001: input,hidraw0: USB HID v1.11 Mouse [PixArt USB Optical Mouse] on usb-0000:00:1d.0-2/input0
[    4.069300] b43-pci-bridge 0000:0c:00.0: Sonics Silicon Backplane found on PCI device 0000:0c:00.0
[    4.141153] usb 7-1.2: new full-speed USB device number 3 using uhci_hcd
[    4.284236] usb 7-1.2: New USB device found, idVendor=0b97, idProduct=7772, bcdDevice= 1.10
[    4.295969] usb 7-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    4.307749] usb 7-1.2: Product: O2Micro CCID SC Reader
[    4.319573] usb 7-1.2: Manufacturer: O2
[    4.521269] firewire_core 0000:03:01.4: created device fw0: GUID 474fc0000ed60090, S400
[    4.768486] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[    5.333516] input: AlpsPS/2 ALPS DualPoint Stick as /devices/platform/i8042/serio1/input/input7
[    5.366991] input: AlpsPS/2 ALPS DualPoint TouchPad as /devices/platform/i8042/serio1/input/input5
[    6.838393] random: crng init done
[    6.842346] random: 7 urandom warning(s) missed due to ratelimiting
[    7.014256] systemd[1]: systemd 237 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid)
[    7.061442] systemd[1]: Detected architecture x86-64.
[    7.153378] systemd[1]: Set hostname to <Latitude-D630-ubuntu>.
[   10.515396] systemd[1]: Reached target Remote File Systems.
[   10.542535] systemd[1]: Reached target Swap.
[   10.569517] systemd[1]: Created slice User and Session Slice.
[   10.596324] systemd[1]: Created slice System Slice.
[   10.622297] systemd[1]: Reached target Slices.
[   10.648088] systemd[1]: Listening on udev Control Socket.
[   10.674011] systemd[1]: Listening on Journal Socket (/dev/log).
[   11.021888] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[   11.552018] systemd-journald[288]: Received request to flush runtime journal from PID 1
[   12.018211] lp: driver loaded but no devices found
[   12.111581] ppdev: user-space parallel port driver
[   21.166847] audit: type=1400 audit(1571743169.224:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=411 comm="apparmor_parser"
[   21.166852] audit: type=1400 audit(1571743169.224:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=411 comm="apparmor_parser"
[   21.166863] audit: type=1400 audit(1571743169.224:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=411 comm="apparmor_parser"
[   21.166866] audit: type=1400 audit(1571743169.224:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=411 comm="apparmor_parser"
[   21.697355] audit: type=1400 audit(1571743169.756:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=415 comm="apparmor_parser"
[   21.697360] audit: type=1400 audit(1571743169.756:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_filter" pid=415 comm="apparmor_parser"
[   21.697364] audit: type=1400 audit(1571743169.756:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_groff" pid=415 comm="apparmor_parser"
[   21.999349] audit: type=1400 audit(1571743170.056:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-oopslash" pid=416 comm="apparmor_parser"
[   22.276695] audit: type=1400 audit(1571743170.336:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-senddoc" pid=417 comm="apparmor_parser"
[   22.618409] audit: type=1400 audit(1571743170.676:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/evince" pid=412 comm="apparmor_parser"
[   26.953806] kauditd_printk_skb: 22 callbacks suppressed
[   26.953808] audit: type=1400 audit(1571743175.012:34): apparmor="STATUS" operation="profile_load" profile="unconfined" name="snap.gnome-system-monitor.gnome-system-monitor" pid=456 comm="apparmor_parser"
[   27.638760] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[   27.965542] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[   28.125277] audit: type=1400 audit(1571743176.184:35): apparmor="STATUS" operation="profile_load" profile="unconfined" name="snap-update-ns.gnome-calculator" pid=458 comm="apparmor_parser"
[   28.817256] yenta_cardbus 0000:03:01.0: enabling device (0000 -> 0003)
[   28.817402] yenta_cardbus 0000:03:01.0: CardBus bridge found [1028:01f9]
[   28.817426] yenta_cardbus 0000:03:01.0: O2: enabling read prefetch/write burst. If you experience problems or performance issues, use the yenta_socket parameter 'o2_speedup=off'
[   28.891764] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.3)
[   28.954011] yenta_cardbus 0000:03:01.0: ISA IRQ mask 0x04b8, PCI irq 19
[   28.954015] yenta_cardbus 0000:03:01.0: Socket status: 30000006
[   28.954022] yenta_cardbus 0000:03:01.0: pcmcia: parent PCI bridge window: [io  0x5000-0x5fff]
[   28.954024] yenta_cardbus 0000:03:01.0: pcmcia: parent PCI bridge window: [mem 0xf6a00000-0xf6afffff]
[   28.954027] pcmcia_socket pcmcia_socket0: cs: memory probe 0xf6a00000-0xf6afffff:
[   28.954037]  excluding 0xf6af0000-0xf6afffff
[   29.127074] audit: type=1400 audit(1571743177.184:36): apparmor="STATUS" operation="profile_load" profile="unconfined" name="snap-update-ns.gnome-characters" pid=465 comm="apparmor_parser"
[   29.158555] dell-smbios A80593CE-A997-11DA-B012-B622A1EF5492: WMI SMBIOS userspace interface not supported(0), try upgrading to a newer BIOS
[   29.521670] input: Dell WMI hotkeys as /devices/platform/PNP0C14:00/wmi_bus/wmi_bus-PNP0C14:00/9DBB5994-A997-11DA-B012-B622A1EF5492/input/input8
[   29.729114] b43-phy0: Broadcom 4311 WLAN found (core revision 10)
[   29.773154] b43-phy0: Found PHY: Analog 4, Type 2 (G), Revision 8
[   29.773180] b43-phy0: Found Radio: Manuf 0x17F, ID 0x2050, Revision 2, Version 0
[   29.773182] b43-phy0 warning: 5 GHz band is unsupported on this PHY
[   29.789383] Broadcom 43xx driver loaded [ Features: PNL ]
[   30.122594] audit: type=1400 audit(1571743178.180:37): apparmor="STATUS" operation="profile_load" profile="unconfined" name="snap-update-ns.gnome-logs" pid=486 comm="apparmor_parser"
[   30.370662] kvm: disabled by bios
[   30.411310] kvm: disabled by bios
[   30.671598] VFIO - User Level meta-driver version: 0.3
[   30.712127] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[   31.158755] intel_powerclamp: No package C-state available
[   31.197586] intel_powerclamp: No package C-state available
[   31.271360] audit: type=1400 audit(1571743179.328:38): apparmor="STATUS" operation="profile_load" profile="unconfined" name="snap-update-ns.gnome-system-monitor" pid=496 comm="apparmor_parser"
[   32.148278] snd_hda_codec_idt hdaudioC0D0: autoconfig for STAC9205: line_outs=1 (0xd/0x0/0x0/0x0/0x0) type:speaker
[   32.148282] snd_hda_codec_idt hdaudioC0D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[   32.148284] snd_hda_codec_idt hdaudioC0D0:    hp_outs=1 (0xa/0x0/0x0/0x0/0x0)
[   32.148286] snd_hda_codec_idt hdaudioC0D0:    mono: mono_out=0x0
[   32.148288] snd_hda_codec_idt hdaudioC0D0:    dig-out=0x21/0x0
[   32.148290] snd_hda_codec_idt hdaudioC0D0:    inputs:
[   32.148292] snd_hda_codec_idt hdaudioC0D0:      Internal Mic=0xc
[   32.148294] snd_hda_codec_idt hdaudioC0D0:      Mic=0xb
[   32.312569] input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[   32.312655] input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[   32.658850] pci 0000:00:00.0: Intel 965GM Chipset
[   32.658875] pci 0000:00:00.0: detected gtt size: 524288K total, 262144K mappable
[   32.659337] pci 0000:00:00.0: detected 8192K stolen memory
[   32.659389] checking generic (e0000000 300000) vs hw (e0000000 10000000)
[   32.659390] fb0: switching to inteldrmfb from VESA VGA
[   32.659427] Console: switching to colour dummy device 80x25
[   32.659619] [drm] Replacing VGA console driver
[   32.661117] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[   32.661119] [drm] Driver supports precise vblank timestamp query.
[   32.662783] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem
[   32.773727] [drm] forcing SVIDEO-1 connector off
[   32.793709] [drm] RC6 disabled, disabling runtime PM support
[   32.795988] [drm] Initialized overlay support.
[   32.797502] [drm] Initialized i915 1.6.0 20181204 for 0000:00:02.0 on minor 0
[   32.797867] ACPI: Video Device [VID1] (multi-head: yes  rom: no  post: no)
[   32.798347] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A03:00/LNXVIDEO:01/input/input11
[   32.799481] [Firmware Bug]: Duplicate ACPI video bus devices for the same VGA controller, please try module parameter "video.allow_duplicates=1"if the current driver doesn't work.
[   32.821206] fbcon: inteldrmfb (fb0) is primary device
[   32.909577] dell_laptop: Using i8042 filter function for receiving events
[   33.659185] Console: switching to colour frame buffer device 160x50
[   33.678728] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[   37.826553] gpio_ich gpio_ich.1.auto: GPIO from 446 to 495
[   40.354993] pcmcia_socket pcmcia_socket0: cs: memory probe 0x0c0000-0x0fffff:
[   40.355004]  excluding 0xc0000-0xcffff 0xe0000-0xfffff
[   40.355038] pcmcia_socket pcmcia_socket0: cs: memory probe 0xa0000000-0xa0ffffff:
[   40.355055]  excluding 0xa0000000-0xa0ffffff
[   40.355163] pcmcia_socket pcmcia_socket0: cs: memory probe 0x60000000-0x60ffffff:
[   40.355181]  excluding 0x60000000-0x60ffffff
[   78.353199] b43-phy0: Loading firmware version 666.2 (2011-02-23 01:15:07)
[   82.337883] wlan0: authenticate with e0:a1:d7:35:77:bc
[   82.353404] wlan0: send auth to e0:a1:d7:35:77:bc (try 1/3)
[   82.354953] wlan0: authenticated
[   82.357179] wlan0: associate with e0:a1:d7:35:77:bc (try 1/3)
[   82.360283] wlan0: RX AssocResp from e0:a1:d7:35:77:bc (capab=0x411 status=0 aid=2)
[   82.360735] wlan0: associated
[   82.596158] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[  179.472778] rfkill: input handler disabled
[  198.681232] Adding 524284k swap on /var/lib/systemd-swap/swapfc/1.  Priority:-2 extents:3 across:540668k FS

nany · Le 22/10/2019, à 17:53

Il faudrait peut-être voir dans le BIOS si secure boot est bien désactivé.

agu · Le 22/10/2019, à 17:56

et voici un démarrage en filaire

gullentops@Latitude-D630-ubuntu:~$

dmesg
[    0.000000] microcode: microcode updated early to revision 0xa4, date = 2010-10-02
[    0.000000] Linux version 5.0.0-31-generic (buildd@lgw01-amd64-046) (gcc version 7.4.0 (Ubuntu 7.4.0-1ubuntu1~18.04.1)) #33~18.04.1-Ubuntu SMP Tue Oct 1 10:20:39 UTC 2019 (Ubuntu 5.0.0-31.33~18.04.1-generic 5.0.21)
[    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-5.0.0-31-generic root=UUID=9ab1b663-d161-4020-8246-90baa9944e6b ro video=SVIDEO-1:d
[    0.000000] KERNEL supported cpus:
[    0.000000]   Intel GenuineIntel
[    0.000000]   AMD AuthenticAMD
[    0.000000]   Hygon HygonGenuine
[    0.000000]   Centaur CentaurHauls
[    0.000000] x86/fpu: x87 FPU will use FXSAVE
[    0.000000] BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009efff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009f000-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000bf65a7ff] usable
[    0.000000] BIOS-e820: [mem 0x00000000bf65a800-0x00000000bfffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec0ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed18000-0x00000000fed1bfff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed20000-0x00000000fed8ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000feda0000-0x00000000feda5fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee0ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ffe00000-0x00000000ffffffff] reserved
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] SMBIOS 2.4 present.
[    0.000000] DMI: Dell Inc. Latitude D630                   /0KU184, BIOS A17 01/04/2010
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.000000] tsc: Detected 1994.570 MHz processor
[    0.005028] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.005030] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.005037] last_pfn = 0xbf65a max_arch_pfn = 0x400000000
[    0.005045] MTRR default type: uncachable
[    0.005046] MTRR fixed ranges enabled:
[    0.005048]   00000-9FFFF write-back
[    0.005049]   A0000-BFFFF uncachable
[    0.005050]   C0000-CFFFF write-protect
[    0.005052]   D0000-EFFFF uncachable
[    0.005053]   F0000-FFFFF write-protect
[    0.005054] MTRR variable ranges enabled:
[    0.005056]   0 base 000000000 mask F80000000 write-back
[    0.005058]   1 base 080000000 mask FC0000000 write-back
[    0.005059]   2 base 0BF800000 mask FFF800000 uncachable
[    0.005061]   3 base 0BF700000 mask FFFF00000 uncachable
[    0.005062]   4 disabled
[    0.005063]   5 disabled
[    0.005063]   6 disabled
[    0.005064]   7 disabled
[    0.005773] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WP  UC- WT  
[    0.006150] total RAM covered: 3063M
[    0.006551] Found optimal setting for mtrr clean up
[    0.006554]  gran_size: 64K 	chunk_size: 16M 	num_reg: 4  	lose cover RAM: 0G
[    0.042621] check: Scanning 1 areas for low memory corruption
[    0.042633] BRK [0xa7801000, 0xa7801fff] PGTABLE
[    0.042637] BRK [0xa7802000, 0xa7802fff] PGTABLE
[    0.042639] BRK [0xa7803000, 0xa7803fff] PGTABLE
[    0.042697] BRK [0xa7804000, 0xa7804fff] PGTABLE
[    0.042700] BRK [0xa7805000, 0xa7805fff] PGTABLE
[    0.042893] BRK [0xa7806000, 0xa7806fff] PGTABLE
[    0.042953] BRK [0xa7807000, 0xa7807fff] PGTABLE
[    0.043015] RAMDISK: [mem 0x3331f000-0x35986fff]
[    0.043028] ACPI: Early table checksum verification disabled
[    0.048482] ACPI: RSDP 0x00000000000FBB10 000024 (v02 DELL  )
[    0.048487] ACPI: XSDT 0x00000000BF65D200 000064 (v01 DELL   M08      27DA0104 ASL  00000061)
[    0.048496] ACPI: FACP 0x00000000BF65D09C 0000F4 (v04 DELL   M08      27DA0104 ASL  00000061)
[    0.048506] ACPI: DSDT 0x00000000BF65D800 006114 (v02 INT430 SYSFexxx 00001001 INTL 20050624)
[    0.048512] ACPI: FACS 0x00000000BF66C000 000040
[    0.048516] ACPI: FACS 0x00000000BF66C000 000040
[    0.048520] ACPI: HPET 0x00000000BF65D300 000038 (v01 DELL   M08      00000001 ASL  00000061)
[    0.048526] ACPI: APIC 0x00000000BF65D400 000068 (v01 DELL   M08      27DA0104 ASL  00000047)
[    0.048531] ACPI: ASF! 0x00000000BF65D000 00007E (v32 DELL   M08      27DA0104 ASL  00000061)
[    0.048537] ACPI: MCFG 0x00000000BF65D3C0 00003E (v16 DELL   M08      27DA0104 ASL  00000061)
[    0.048542] ACPI: TCPA 0x00000000BF65D700 000032 (v01                 00000000 ASL  00000000)
[    0.048548] ACPI: SLIC 0x00000000BF65D49C 000176 (v01 DELL   M08      27DA0104 ASL  00000061)
[    0.048553] ACPI: SSDT 0x00000000BF65B9C0 0004CC (v01 PmRef  CpuPm    00003000 INTL 20050624)
[    0.048569] ACPI: Local APIC address 0xfee00000
[    0.048701] No NUMA configuration found
[    0.048703] Faking a node at [mem 0x0000000000000000-0x00000000bf659fff]
[    0.048719] NODE_DATA(0) allocated [mem 0xbf62f000-0xbf659fff]
[    0.049117] Zone ranges:
[    0.049118]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.049121]   DMA32    [mem 0x0000000001000000-0x00000000bf659fff]
[    0.049123]   Normal   empty
[    0.049125]   Device   empty
[    0.049126] Movable zone start for each node
[    0.049130] Early memory node ranges
[    0.049132]   node   0: [mem 0x0000000000001000-0x000000000009efff]
[    0.049134]   node   0: [mem 0x0000000000100000-0x00000000bf659fff]
[    0.049139] Zeroed struct page in unavailable ranges: 98 pages
[    0.049140] Initmem setup node 0 [mem 0x0000000000001000-0x00000000bf659fff]
[    0.049143] On node 0 totalpages: 783864
[    0.049144]   DMA zone: 64 pages used for memmap
[    0.049145]   DMA zone: 21 pages reserved
[    0.049147]   DMA zone: 3998 pages, LIFO batch:0
[    0.049301]   DMA32 zone: 12186 pages used for memmap
[    0.049302]   DMA32 zone: 779866 pages, LIFO batch:63
[    0.088941] Reserving Intel graphics memory at [mem 0xbf800000-0xbfffffff]
[    0.089204] ACPI: PM-Timer IO Port: 0x1008
[    0.089209] ACPI: Local APIC address 0xfee00000
[    0.089223] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[    0.089225] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[    0.089239] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[    0.089243] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.089246] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.089249] ACPI: IRQ0 used by override.
[    0.089250] ACPI: IRQ9 used by override.
[    0.089253] Using ACPI (MADT) for SMP configuration information
[    0.089256] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.089268] smpboot: Allowing 2 CPUs, 0 hotplug CPUs
[    0.089289] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.089291] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[    0.089293] PM: Registered nosave memory: [mem 0x000a0000-0x000fffff]
[    0.089296] [mem 0xc0000000-0xf7ffffff] available for PCI devices
[    0.089299] Booting paravirtualized kernel on bare hardware
[    0.089305] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[    0.089323] random: get_random_bytes called from start_kernel+0x97/0x516 with crng_init=0
[    0.089334] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:2 nr_cpu_ids:2 nr_node_ids:1
[    0.090899] percpu: Embedded 47 pages/cpu s155648 r8192 d28672 u1048576
[    0.090908] pcpu-alloc: s155648 r8192 d28672 u1048576 alloc=1*2097152
[    0.090911] pcpu-alloc: [0] 0 1 
[    0.090953] Built 1 zonelists, mobility grouping on.  Total pages: 771593
[    0.090956] Policy zone: DMA32
[    0.090959] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-5.0.0-31-generic root=UUID=9ab1b663-d161-4020-8246-90baa9944e6b ro video=SVIDEO-1:d
[    0.091133] Calgary: detecting Calgary via BIOS EBDA area
[    0.091135] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[    0.134343] Memory: 3011588K/3135456K available (14339K kernel code, 2335K rwdata, 4404K rodata, 2588K init, 5192K bss, 123868K reserved, 0K cma-reserved)
[    0.134611] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[    0.134628] Kernel/User page tables isolation: enabled
[    0.134671] ftrace: allocating 41614 entries in 163 pages
[    0.164939] rcu: Hierarchical RCU implementation.
[    0.164944] rcu: 	RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=2.
[    0.164946] 	Tasks RCU enabled.
[    0.164948] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
[    0.164949] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
[    0.169550] NR_IRQS: 524544, nr_irqs: 440, preallocated irqs: 16
[    0.169805] Console: colour dummy device 80x25
[    0.170016] printk: console [tty0] enabled
[    0.170047] ACPI: Core revision 20181213
[    0.170283] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[    0.170301] hpet clockevent registered
[    0.170308] APIC: Switch to symmetric I/O mode setup
[    0.170779] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.190306] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x398049395d3, max_idle_ns: 881590629167 ns
[    0.190328] Calibrating delay loop (skipped), value calculated using timer frequency.. 3989.14 BogoMIPS (lpj=7978280)
[    0.190335] pid_max: default: 32768 minimum: 301
[    0.190387] LSM: Security Framework initializing
[    0.190408] Yama: becoming mindful.
[    0.190436] AppArmor: AppArmor initialized
[    0.193074] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[    0.194706] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[    0.194824] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
[    0.194881] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
[    0.195334] mce: CPU0: Thermal monitoring enabled (TM2)
[    0.195341] process: using mwait in idle threads
[    0.195349] Last level iTLB entries: 4KB 128, 2MB 4, 4MB 4
[    0.195353] Last level dTLB entries: 4KB 256, 2MB 0, 4MB 32, 1GB 0
[    0.195357] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
[    0.195362] Spectre V2 : Mitigation: Full generic retpoline
[    0.195365] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[    0.195370] Speculative Store Bypass: Vulnerable
[    0.195419] MDS: Vulnerable: Clear CPU buffers attempted, no microcode
[    0.195646] Freeing SMP alternatives memory: 36K
[    0.309172] smpboot: CPU0: Intel(R) Core(TM)2 Duo CPU     T7250  @ 2.00GHz (family: 0x6, model: 0xf, stepping: 0xd)
[    0.309395] Performance Events: PEBS fmt0+, Core2 events, 4-deep LBR, Intel PMU driver.
[    0.309408] core: PEBS disabled due to CPU errata
[    0.309413] ... version:                2
[    0.309416] ... bit width:              40
[    0.309419] ... generic registers:      2
[    0.309422] ... value mask:             000000ffffffffff
[    0.309425] ... max period:             000000007fffffff
[    0.309428] ... fixed-purpose events:   3
[    0.309431] ... event mask:             0000000700000003
[    0.309501] rcu: Hierarchical SRCU implementation.
[    0.310311] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[    0.310311] smp: Bringing up secondary CPUs ...
[    0.310311] x86: Booting SMP configuration:
[    0.310311] .... node  #0, CPUs:      #1
[    0.310401] smp: Brought up 1 node, 2 CPUs
[    0.310401] smpboot: Max logical packages: 1
[    0.310401] smpboot: Total of 2 processors activated (7978.28 BogoMIPS)
[    0.311792] devtmpfs: initialized
[    0.311792] x86/mm: Memory block size: 128MB
[    0.314322] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[    0.314335] futex hash table entries: 512 (order: 3, 32768 bytes)
[    0.314411] pinctrl core: initialized pinctrl subsystem
[    0.314593] RTC time: 15:48:49, date: 2019-10-22
[    0.314771] NET: Registered protocol family 16
[    0.314911] audit: initializing netlink subsys (disabled)
[    0.314924] audit: type=2000 audit(1571759329.144:1): state=initialized audit_enabled=0 res=1
[    0.314924] EISA bus registered
[    0.314924] cpuidle: using governor ladder
[    0.314924] cpuidle: using governor menu
[    0.314924] ACPI: bus type PCI registered
[    0.314924] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.314924] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[    0.314924] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
[    0.314924] PCI: Using configuration type 1 for base access
[    0.316769] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[    0.316769] ACPI: Added _OSI(Module Device)
[    0.316769] ACPI: Added _OSI(Processor Device)
[    0.316769] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.316769] ACPI: Added _OSI(Processor Aggregator Device)
[    0.316769] ACPI: Added _OSI(Linux-Dell-Video)
[    0.316769] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
[    0.316769] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics)
[    0.324368] ACPI: 2 ACPI AML tables successfully acquired and loaded
[    0.338497] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
[    0.344128] ACPI: Dynamic OEM Table Load:
[    0.344138] ACPI: SSDT 0xFFFF9419FB14E4E0 000043 (v01 LMPWR  DELLLOM  00001001 INTL 20050624)
[    0.344746] ACPI: Dynamic OEM Table Load:
[    0.344755] ACPI: SSDT 0xFFFF9419FB197C00 000286 (v01 PmRef  Cpu0Ist  00003000 INTL 20050624)
[    0.345302] ACPI: Dynamic OEM Table Load:
[    0.345312] ACPI: SSDT 0xFFFF9419FB077800 0005E5 (v01 PmRef  Cpu0Cst  00003001 INTL 20050624)
[    0.346124] ACPI: Dynamic OEM Table Load:
[    0.346133] ACPI: SSDT 0xFFFF9419FB170100 0000C4 (v01 PmRef  Cpu1Ist  00003000 INTL 20050624)
[    0.346424] ACPI: Dynamic OEM Table Load:
[    0.346432] ACPI: SSDT 0xFFFF9419FB169F00 000085 (v01 PmRef  Cpu1Cst  00003000 INTL 20050624)
[    0.347134] ACPI: Interpreter enabled
[    0.347163] ACPI: (supports S0 S3 S4 S5)
[    0.347167] ACPI: Using IOAPIC for interrupt routing
[    0.347206] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.347567] ACPI: Enabled 13 GPEs in block 00 to 1F
[    0.400146] acpi PNP0C15:00: ACPI dock station (docks/bays count: 1)
[    0.433446] acpi LNXIOBAY:00: ACPI dock station (docks/bays count: 2)
[    0.434442] acpi LNXIOBAY:01: ACPI dock station (docks/bays count: 3)
[    0.476031] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.476042] acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[    0.476067] acpi PNP0A03:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
[    0.490456] PCI host bridge to bus 0000:00
[    0.490463] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    0.490467] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.490472] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.490477] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000dffff window]
[    0.490482] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xf7ffffff window]
[    0.490486] pci_bus 0000:00: root bus resource [mem 0xfc000000-0xfebfffff window]
[    0.490491] pci_bus 0000:00: root bus resource [mem 0xfec10000-0xfecfffff window]
[    0.490496] pci_bus 0000:00: root bus resource [mem 0xfed1c000-0xfed1ffff window]
[    0.490501] pci_bus 0000:00: root bus resource [mem 0xfed90000-0xfed9ffff window]
[    0.490505] pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed44fff window]
[    0.490510] pci_bus 0000:00: root bus resource [mem 0xfeda7000-0xfedfffff window]
[    0.490515] pci_bus 0000:00: root bus resource [mem 0xfee10000-0xff9fffff window]
[    0.490520] pci_bus 0000:00: root bus resource [mem 0xffc00000-0xffdfffff window]
[    0.490525] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.490538] pci 0000:00:00.0: [8086:2a00] type 00 class 0x060000
[    0.490713] pci 0000:00:02.0: [8086:2a02] type 00 class 0x030000
[    0.490729] pci 0000:00:02.0: reg 0x10: [mem 0xf6e00000-0xf6efffff 64bit]
[    0.490738] pci 0000:00:02.0: reg 0x18: [mem 0xe0000000-0xefffffff 64bit pref]
[    0.490744] pci 0000:00:02.0: reg 0x20: [io  0xefe8-0xefef]
[    0.490903] pci 0000:00:02.1: [8086:2a03] type 00 class 0x038000
[    0.490917] pci 0000:00:02.1: reg 0x10: [mem 0xf6f00000-0xf6ffffff 64bit]
[    0.491130] pci 0000:00:1a.0: [8086:2834] type 00 class 0x0c0300
[    0.491195] pci 0000:00:1a.0: reg 0x20: [io  0x6f20-0x6f3f]
[    0.491367] pci 0000:00:1a.1: [8086:2835] type 00 class 0x0c0300
[    0.491432] pci 0000:00:1a.1: reg 0x20: [io  0x6f00-0x6f1f]
[    0.491613] pci 0000:00:1a.7: [8086:283a] type 00 class 0x0c0320
[    0.491641] pci 0000:00:1a.7: reg 0x10: [mem 0xfed1c400-0xfed1c7ff]
[    0.491751] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
[    0.491909] pci 0000:00:1b.0: [8086:284b] type 00 class 0x040300
[    0.491943] pci 0000:00:1b.0: reg 0x10: [mem 0xf6dfc000-0xf6dfffff 64bit]
[    0.492066] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.492235] pci 0000:00:1c.0: [8086:283f] type 01 class 0x060400
[    0.492370] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.492544] pci 0000:00:1c.1: [8086:2841] type 01 class 0x060400
[    0.492679] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[    0.492856] pci 0000:00:1c.5: [8086:2849] type 01 class 0x060400
[    0.492991] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
[    0.493162] pci 0000:00:1d.0: [8086:2830] type 00 class 0x0c0300
[    0.493226] pci 0000:00:1d.0: reg 0x20: [io  0x6f80-0x6f9f]
[    0.493398] pci 0000:00:1d.1: [8086:2831] type 00 class 0x0c0300
[    0.493462] pci 0000:00:1d.1: reg 0x20: [io  0x6f60-0x6f7f]
[    0.493634] pci 0000:00:1d.2: [8086:2832] type 00 class 0x0c0300
[    0.493698] pci 0000:00:1d.2: reg 0x20: [io  0x6f40-0x6f5f]
[    0.493884] pci 0000:00:1d.7: [8086:2836] type 00 class 0x0c0320
[    0.493913] pci 0000:00:1d.7: reg 0x10: [mem 0xfed1c000-0xfed1c3ff]
[    0.494024] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[    0.494174] pci 0000:00:1e.0: [8086:2448] type 01 class 0x060401
[    0.494407] pci 0000:00:1f.0: [8086:2815] type 00 class 0x060100
[    0.494535] pci 0000:00:1f.0: quirk: [io  0x1000-0x107f] claimed by ICH6 ACPI/GPIO/TCO
[    0.494545] pci 0000:00:1f.0: quirk: [io  0x1080-0x10bf] claimed by ICH6 GPIO
[    0.494552] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0900 (mask 007f)
[    0.494561] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 3 PIO at 0c80 (mask 003f)
[    0.494740] pci 0000:00:1f.1: [8086:2850] type 00 class 0x01018a
[    0.494764] pci 0000:00:1f.1: reg 0x10: [io  0x01f0-0x01f7]
[    0.494776] pci 0000:00:1f.1: reg 0x14: [io  0x03f4-0x03f7]
[    0.494788] pci 0000:00:1f.1: reg 0x18: [io  0x0170-0x0177]
[    0.494800] pci 0000:00:1f.1: reg 0x1c: [io  0x0374-0x0377]
[    0.494812] pci 0000:00:1f.1: reg 0x20: [io  0x6fa0-0x6faf]
[    0.494840] pci 0000:00:1f.1: legacy IDE quirk: reg 0x10: [io  0x01f0-0x01f7]
[    0.494845] pci 0000:00:1f.1: legacy IDE quirk: reg 0x14: [io  0x03f6]
[    0.494849] pci 0000:00:1f.1: legacy IDE quirk: reg 0x18: [io  0x0170-0x0177]
[    0.494853] pci 0000:00:1f.1: legacy IDE quirk: reg 0x1c: [io  0x0376]
[    0.494999] pci 0000:00:1f.2: [8086:2828] type 00 class 0x01018f
[    0.495025] pci 0000:00:1f.2: reg 0x10: [io  0x6eb0-0x6eb7]
[    0.495038] pci 0000:00:1f.2: reg 0x14: [io  0x6eb8-0x6ebb]
[    0.495050] pci 0000:00:1f.2: reg 0x18: [io  0x6ec0-0x6ec7]
[    0.495062] pci 0000:00:1f.2: reg 0x1c: [io  0x6ec8-0x6ecb]
[    0.495074] pci 0000:00:1f.2: reg 0x20: [io  0x6ee0-0x6eef]
[    0.495087] pci 0000:00:1f.2: reg 0x24: [io  0xeff0-0xefff]
[    0.495138] pci 0000:00:1f.2: PME# supported from D3hot
[    0.495282] pci 0000:00:1f.3: [8086:283e] type 00 class 0x0c0500
[    0.495306] pci 0000:00:1f.3: reg 0x10: [mem 0xf6dfbf00-0xf6dfbfff]
[    0.495349] pci 0000:00:1f.3: reg 0x20: [io  0x10c0-0x10df]
[    0.495588] pci 0000:00:1c.0: PCI bridge to [bus 0b]
[    0.495710] pci 0000:0c:00.0: [14e4:4312] type 00 class 0x028000
[    0.495750] pci 0000:0c:00.0: reg 0x10: [mem 0xf6cfc000-0xf6cfffff]
[    0.495854] pci 0000:0c:00.0: enabling Extended Tags
[    0.495959] pci 0000:0c:00.0: supports D1 D2
[    0.496077] pci 0000:0c:00.0: disabling ASPM on pre-1.1 PCIe device.  You can enable it with 'pcie_aspm=force'
[    0.496097] pci 0000:00:1c.1: PCI bridge to [bus 0c]
[    0.496107] pci 0000:00:1c.1:   bridge window [mem 0xf6c00000-0xf6cfffff]
[    0.496242] pci 0000:09:00.0: [14e4:1673] type 00 class 0x020000
[    0.496294] pci 0000:09:00.0: reg 0x10: [mem 0xf6bf0000-0xf6bfffff 64bit]
[    0.496385] pci 0000:09:00.0: enabling Extended Tags
[    0.496523] pci 0000:09:00.0: PME# supported from D3hot D3cold
[    0.496711] pci 0000:00:1c.5: PCI bridge to [bus 09]
[    0.496722] pci 0000:00:1c.5:   bridge window [mem 0xf6b00000-0xf6bfffff]
[    0.496756] pci_bus 0000:03: extended config space not accessible
[    0.496859] pci 0000:03:01.0: [1217:7135] type 02 class 0x060700
[    0.496883] pci 0000:03:01.0: reg 0x10: [mem 0x00000000-0x00000fff]
[    0.496932] pci 0000:03:01.0: supports D1 D2
[    0.496934] pci 0000:03:01.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.497042] pci 0000:03:01.4: [1217:00f7] type 00 class 0x0c0010
[    0.497065] pci 0000:03:01.4: reg 0x10: [mem 0xf6aff000-0xf6afffff]
[    0.497077] pci 0000:03:01.4: reg 0x14: [mem 0xf6afe800-0xf6afefff]
[    0.497170] pci 0000:03:01.4: supports D1 D2
[    0.497172] pci 0000:03:01.4: PME# supported from D0 D1 D2 D3hot D3cold
[    0.497309] pci 0000:00:1e.0: PCI bridge to [bus 03-04] (subtractive decode)
[    0.497320] pci 0000:00:1e.0:   bridge window [mem 0xf6a00000-0xf6afffff]
[    0.497329] pci 0000:00:1e.0:   bridge window [io  0x0000-0x0cf7 window] (subtractive decode)
[    0.497331] pci 0000:00:1e.0:   bridge window [io  0x0d00-0xffff window] (subtractive decode)
[    0.497333] pci 0000:00:1e.0:   bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
[    0.497335] pci 0000:00:1e.0:   bridge window [mem 0x000d0000-0x000dffff window] (subtractive decode)
[    0.497337] pci 0000:00:1e.0:   bridge window [mem 0xc0000000-0xf7ffffff window] (subtractive decode)
[    0.497339] pci 0000:00:1e.0:   bridge window [mem 0xfc000000-0xfebfffff window] (subtractive decode)
[    0.497341] pci 0000:00:1e.0:   bridge window [mem 0xfec10000-0xfecfffff window] (subtractive decode)
[    0.497343] pci 0000:00:1e.0:   bridge window [mem 0xfed1c000-0xfed1ffff window] (subtractive decode)
[    0.497344] pci 0000:00:1e.0:   bridge window [mem 0xfed90000-0xfed9ffff window] (subtractive decode)
[    0.497346] pci 0000:00:1e.0:   bridge window [mem 0xfed40000-0xfed44fff window] (subtractive decode)
[    0.497348] pci 0000:00:1e.0:   bridge window [mem 0xfeda7000-0xfedfffff window] (subtractive decode)
[    0.497350] pci 0000:00:1e.0:   bridge window [mem 0xfee10000-0xff9fffff window] (subtractive decode)
[    0.497352] pci 0000:00:1e.0:   bridge window [mem 0xffc00000-0xffdfffff window] (subtractive decode)
[    0.497391] pci_bus 0000:04: extended config space not accessible
[    0.497423] pci_bus 0000:04: busn_res: [bus 04] end can not be updated to 07
[    0.497429] pci 0000:00:1e.0: bridge has subordinate 04 but max busn 07
[    0.515666] ACPI: PCI Interrupt Link [LNKA] (IRQs 9 10 *11)
[    0.515833] ACPI: PCI Interrupt Link [LNKB] (IRQs 5 7) *3
[    0.515998] ACPI: PCI Interrupt Link [LNKC] (IRQs 9 *10 11)
[    0.516163] ACPI: PCI Interrupt Link [LNKD] (IRQs 5 7 9 10 *11)
[    0.516328] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
[    0.516496] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
[    0.516663] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
[    0.516808] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
[    0.518645] SCSI subsystem initialized
[    0.518688] libata version 3.00 loaded.
[    0.518688] pci 0000:00:02.0: vgaarb: setting as boot VGA device
[    0.518688] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[    0.518688] pci 0000:00:02.0: vgaarb: bridge control possible
[    0.518688] vgaarb: loaded
[    0.518688] ACPI: bus type USB registered
[    0.518688] usbcore: registered new interface driver usbfs
[    0.518688] usbcore: registered new interface driver hub
[    0.518688] usbcore: registered new device driver usb
[    0.518688] pps_core: LinuxPPS API ver. 1 registered
[    0.518688] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.518688] PTP clock support registered
[    0.518688] EDAC MC: Ver: 3.0.0
[    0.518688] PCI: Using ACPI for IRQ routing
[    0.520945] PCI: pci_cache_line_size set to 64 bytes
[    0.521031] e820: reserve RAM buffer [mem 0x0009f000-0x0009ffff]
[    0.521033] e820: reserve RAM buffer [mem 0xbf65a800-0xbfffffff]
[    0.522316] NetLabel: Initializing
[    0.522316] NetLabel:  domain hash size = 128
[    0.522316] NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
[    0.522316] NetLabel:  unlabeled traffic allowed by default
[    0.523232] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[    0.523232] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[    0.523232] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[    0.524366] clocksource: Switched to clocksource tsc-early
[    0.546101] VFS: Disk quotas dquot_6.6.0
[    0.546139] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.546350] AppArmor: AppArmor Filesystem Enabled
[    0.546411] pnp: PnP ACPI init
[    0.546569] pnp 00:00: Plug and Play ACPI device, IDs PNP0f13 (active)
[    0.546622] pnp 00:01: Plug and Play ACPI device, IDs PNP0303 (active)
[    0.546675] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.546782] system 00:03: [io  0x0c80-0x0caf] has been reserved
[    0.546788] system 00:03: [io  0x0cc0-0x0cff] could not be reserved
[    0.546798] system 00:03: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.546922] system 00:04: [mem 0xfed00000-0xfed003ff] has been reserved
[    0.546932] system 00:04: Plug and Play ACPI device, IDs PNP0103 PNP0c01 (active)
[    0.555369] pnp 00:05: Plug and Play ACPI device, IDs PNP0501 (active)
[    0.592513] system 00:06: [io  0x0cb0-0x0cbb] has been reserved
[    0.592520] system 00:06: [mem 0xfed40000-0xfed44fff] has been reserved
[    0.592529] system 00:06: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.595535] pnp 00:07: disabling [io  0x1000-0x1005] because it overlaps 0000:00:1f.0 BAR 13 [io  0x1000-0x107f]
[    0.595543] pnp 00:07: disabling [io  0x1008-0x100f] because it overlaps 0000:00:1f.0 BAR 13 [io  0x1000-0x107f]
[    0.595581] system 00:07: [io  0x0900-0x097f] has been reserved
[    0.595587] system 00:07: [io  0x04d0-0x04d1] has been reserved
[    0.595596] system 00:07: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.595637] pnp 00:08: disabling [io  0x1006-0x1007] because it overlaps 0000:00:1f.0 BAR 13 [io  0x1000-0x107f]
[    0.595644] pnp 00:08: disabling [io  0x100a-0x1059] because it overlaps 0000:00:1f.0 BAR 13 [io  0x1000-0x107f]
[    0.595650] pnp 00:08: disabling [io  0x1060-0x107f] because it overlaps 0000:00:1f.0 BAR 13 [io  0x1000-0x107f]
[    0.595656] pnp 00:08: disabling [io  0x1010-0x102f] because it overlaps 0000:00:1f.0 BAR 13 [io  0x1000-0x107f]
[    0.595696] system 00:08: [io  0xf400-0xf4fe] has been reserved
[    0.595702] system 00:08: [io  0x1080-0x10bf] has been reserved
[    0.595706] system 00:08: [io  0x10c0-0x10df] has been reserved
[    0.595711] system 00:08: [io  0x0809] has been reserved
[    0.595720] system 00:08: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.614692] system 00:09: [mem 0x00000000-0x0009efff] could not be reserved
[    0.614698] system 00:09: [mem 0x0009f000-0x0009ffff] could not be reserved
[    0.614703] system 00:09: [mem 0x000c0000-0x000cffff] could not be reserved
[    0.614708] system 00:09: [mem 0x000e0000-0x000fffff] could not be reserved
[    0.614713] system 00:09: [mem 0x00100000-0xbf65a7ff] could not be reserved
[    0.614718] system 00:09: [mem 0xbf65a800-0xbf6fffff] has been reserved
[    0.614722] system 00:09: [mem 0xbf700000-0xbf7fffff] has been reserved
[    0.614727] system 00:09: [mem 0xbf700000-0xbfefffff] could not be reserved
[    0.614732] system 00:09: [mem 0xffe00000-0xffffffff] has been reserved
[    0.614737] system 00:09: [mem 0xffa00000-0xffbfffff] has been reserved
[    0.614742] system 00:09: [mem 0xfec00000-0xfec0ffff] could not be reserved
[    0.614746] system 00:09: [mem 0xfee00000-0xfee0ffff] has been reserved
[    0.614751] system 00:09: [mem 0xfed20000-0xfed3ffff] has been reserved
[    0.614755] system 00:09: [mem 0xfed45000-0xfed8ffff] has been reserved
[    0.614764] system 00:09: [mem 0xfeda0000-0xfeda3fff] has been reserved
[    0.614768] system 00:09: [mem 0xfeda4000-0xfeda4fff] has been reserved
[    0.614773] system 00:09: [mem 0xfeda5000-0xfeda5fff] has been reserved
[    0.614778] system 00:09: [mem 0xfeda6000-0xfeda6fff] has been reserved
[    0.614782] system 00:09: [mem 0xfed18000-0xfed1bfff] has been reserved
[    0.614787] system 00:09: [mem 0xf8000000-0xfbffffff] has been reserved
[    0.614796] system 00:09: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.614883] pnp: PnP ACPI: found 10 devices
[    0.621850] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.621877] pci 0000:00:1c.0: bridge window [io  0x1000-0x0fff] to [bus 0b] add_size 1000
[    0.621881] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 0b] add_size 200000 add_align 100000
[    0.621884] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 0b] add_size 200000 add_align 100000
[    0.621896] pci 0000:00:1c.1: bridge window [io  0x1000-0x0fff] to [bus 0c] add_size 1000
[    0.621899] pci 0000:00:1c.1: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 0c] add_size 200000 add_align 100000
[    0.621911] pci 0000:00:1c.5: bridge window [io  0x1000-0x0fff] to [bus 09] add_size 1000
[    0.621913] pci 0000:00:1c.5: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 09] add_size 200000 add_align 100000
[    0.621932] pci 0000:00:1e.0: bridge window [io  0x1000-0x0fff] to [bus 03-04] add_size 1000
[    0.621949] pci 0000:00:1c.0: BAR 14: assigned [mem 0xc0000000-0xc01fffff]
[    0.621961] pci 0000:00:1c.0: BAR 15: assigned [mem 0xc0200000-0xc03fffff 64bit pref]
[    0.621972] pci 0000:00:1c.1: BAR 15: assigned [mem 0xc0400000-0xc05fffff 64bit pref]
[    0.621983] pci 0000:00:1c.5: BAR 15: assigned [mem 0xc0600000-0xc07fffff 64bit pref]
[    0.621989] pci 0000:00:1c.0: BAR 13: assigned [io  0x2000-0x2fff]
[    0.621995] pci 0000:00:1c.1: BAR 13: assigned [io  0x3000-0x3fff]
[    0.622000] pci 0000:00:1c.5: BAR 13: assigned [io  0x4000-0x4fff]
[    0.622006] pci 0000:00:1e.0: BAR 13: assigned [io  0x5000-0x5fff]
[    0.622013] pci 0000:00:1c.0: PCI bridge to [bus 0b]
[    0.622019] pci 0000:00:1c.0:   bridge window [io  0x2000-0x2fff]
[    0.622028] pci 0000:00:1c.0:   bridge window [mem 0xc0000000-0xc01fffff]
[    0.622036] pci 0000:00:1c.0:   bridge window [mem 0xc0200000-0xc03fffff 64bit pref]
[    0.622047] pci 0000:00:1c.1: PCI bridge to [bus 0c]
[    0.622052] pci 0000:00:1c.1:   bridge window [io  0x3000-0x3fff]
[    0.622061] pci 0000:00:1c.1:   bridge window [mem 0xf6c00000-0xf6cfffff]
[    0.622068] pci 0000:00:1c.1:   bridge window [mem 0xc0400000-0xc05fffff 64bit pref]
[    0.622079] pci 0000:00:1c.5: PCI bridge to [bus 09]
[    0.622084] pci 0000:00:1c.5:   bridge window [io  0x4000-0x4fff]
[    0.622093] pci 0000:00:1c.5:   bridge window [mem 0xf6b00000-0xf6bfffff]
[    0.622100] pci 0000:00:1c.5:   bridge window [mem 0xc0600000-0xc07fffff 64bit pref]
[    0.622115] pci 0000:03:01.0: BAR 0: assigned [mem 0xc4000000-0xc4000fff]
[    0.622125] pci 0000:03:01.0: BAR 15: assigned [mem 0xc8000000-0xcbffffff pref]
[    0.622132] pci 0000:03:01.0: BAR 16: assigned [mem 0xcc000000-0xcfffffff]
[    0.622137] pci 0000:03:01.0: BAR 13: assigned [io  0x5000-0x50ff]
[    0.622141] pci 0000:03:01.0: BAR 14: assigned [io  0x5400-0x54ff]
[    0.622146] pci 0000:03:01.0: CardBus bridge to [bus 04]
[    0.622150] pci 0000:03:01.0:   bridge window [io  0x5000-0x50ff]
[    0.622158] pci 0000:03:01.0:   bridge window [io  0x5400-0x54ff]
[    0.622165] pci 0000:03:01.0:   bridge window [mem 0xc8000000-0xcbffffff pref]
[    0.622173] pci 0000:03:01.0:   bridge window [mem 0xcc000000-0xcfffffff]
[    0.622181] pci 0000:00:1e.0: PCI bridge to [bus 03-04]
[    0.622186] pci 0000:00:1e.0:   bridge window [io  0x5000-0x5fff]
[    0.622194] pci 0000:00:1e.0:   bridge window [mem 0xf6a00000-0xf6afffff]
[    0.622209] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    0.622211] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    0.622213] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.622215] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff window]
[    0.622217] pci_bus 0000:00: resource 8 [mem 0xc0000000-0xf7ffffff window]
[    0.622219] pci_bus 0000:00: resource 9 [mem 0xfc000000-0xfebfffff window]
[    0.622221] pci_bus 0000:00: resource 10 [mem 0xfec10000-0xfecfffff window]
[    0.622222] pci_bus 0000:00: resource 11 [mem 0xfed1c000-0xfed1ffff window]
[    0.622224] pci_bus 0000:00: resource 12 [mem 0xfed90000-0xfed9ffff window]
[    0.622226] pci_bus 0000:00: resource 13 [mem 0xfed40000-0xfed44fff window]
[    0.622228] pci_bus 0000:00: resource 14 [mem 0xfeda7000-0xfedfffff window]
[    0.622230] pci_bus 0000:00: resource 15 [mem 0xfee10000-0xff9fffff window]
[    0.622232] pci_bus 0000:00: resource 16 [mem 0xffc00000-0xffdfffff window]
[    0.622234] pci_bus 0000:0b: resource 0 [io  0x2000-0x2fff]
[    0.622236] pci_bus 0000:0b: resource 1 [mem 0xc0000000-0xc01fffff]
[    0.622237] pci_bus 0000:0b: resource 2 [mem 0xc0200000-0xc03fffff 64bit pref]
[    0.622239] pci_bus 0000:0c: resource 0 [io  0x3000-0x3fff]
[    0.622241] pci_bus 0000:0c: resource 1 [mem 0xf6c00000-0xf6cfffff]
[    0.622243] pci_bus 0000:0c: resource 2 [mem 0xc0400000-0xc05fffff 64bit pref]
[    0.622245] pci_bus 0000:09: resource 0 [io  0x4000-0x4fff]
[    0.622247] pci_bus 0000:09: resource 1 [mem 0xf6b00000-0xf6bfffff]
[    0.622248] pci_bus 0000:09: resource 2 [mem 0xc0600000-0xc07fffff 64bit pref]
[    0.622250] pci_bus 0000:03: resource 0 [io  0x5000-0x5fff]
[    0.622252] pci_bus 0000:03: resource 1 [mem 0xf6a00000-0xf6afffff]
[    0.622254] pci_bus 0000:03: resource 4 [io  0x0000-0x0cf7 window]
[    0.622256] pci_bus 0000:03: resource 5 [io  0x0d00-0xffff window]
[    0.622258] pci_bus 0000:03: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.622259] pci_bus 0000:03: resource 7 [mem 0x000d0000-0x000dffff window]
[    0.622261] pci_bus 0000:03: resource 8 [mem 0xc0000000-0xf7ffffff window]
[    0.622263] pci_bus 0000:03: resource 9 [mem 0xfc000000-0xfebfffff window]
[    0.622265] pci_bus 0000:03: resource 10 [mem 0xfec10000-0xfecfffff window]
[    0.622267] pci_bus 0000:03: resource 11 [mem 0xfed1c000-0xfed1ffff window]
[    0.622269] pci_bus 0000:03: resource 12 [mem 0xfed90000-0xfed9ffff window]
[    0.622271] pci_bus 0000:03: resource 13 [mem 0xfed40000-0xfed44fff window]
[    0.622273] pci_bus 0000:03: resource 14 [mem 0xfeda7000-0xfedfffff window]
[    0.622274] pci_bus 0000:03: resource 15 [mem 0xfee10000-0xff9fffff window]
[    0.622276] pci_bus 0000:03: resource 16 [mem 0xffc00000-0xffdfffff window]
[    0.622278] pci_bus 0000:04: resource 0 [io  0x5000-0x50ff]
[    0.622280] pci_bus 0000:04: resource 1 [io  0x5400-0x54ff]
[    0.622282] pci_bus 0000:04: resource 2 [mem 0xc8000000-0xcbffffff pref]
[    0.622283] pci_bus 0000:04: resource 3 [mem 0xcc000000-0xcfffffff]
[    0.622454] NET: Registered protocol family 2
[    0.622711] tcp_listen_portaddr_hash hash table entries: 2048 (order: 3, 32768 bytes)
[    0.622748] TCP established hash table entries: 32768 (order: 6, 262144 bytes)
[    0.622889] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
[    0.623095] TCP: Hash tables configured (established 32768 bind 32768)
[    0.623171] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[    0.623205] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[    0.623353] NET: Registered protocol family 1
[    0.623364] NET: Registered protocol family 44
[    0.623384] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    0.626319] PCI: CLS 64 bytes, default 64
[    0.626400] Unpacking initramfs...
[    1.427315] Freeing initrd memory: 39328K
[    1.427632] check: Scanning for low memory corruption every 60 seconds
[    1.428606] Initialise system trusted keyrings
[    1.428625] Key type blacklist registered
[    1.428728] workingset: timestamp_bits=36 max_order=20 bucket_order=0
[    1.431580] zbud: loaded
[    1.432309] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    1.432676] fuse init (API version 7.28)
[    1.492598] Key type asymmetric registered
[    1.492610] Asymmetric key parser 'x509' registered
[    1.492639] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 243)
[    1.492696] io scheduler mq-deadline registered
[    1.493858] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[    1.493969] vesafb: mode is 1024x768x32, linelength=4096, pages=0
[    1.493973] vesafb: scrolling: redraw
[    1.493977] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[    1.493999] vesafb: framebuffer at 0xe0000000, mapped to 0x(____ptrval____), using 3072k, total 3072k
[    1.518081] Console: switching to colour frame buffer device 128x48
[    1.542249] fb0: VESA VGA frame buffer device
[    1.542474] intel_idle: does not run on family 6 model 15
[    1.542647] ACPI: AC Adapter [AC] (on-line)
[    1.542931] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0
[    1.543319] ACPI: Lid Switch [LID]
[    1.543530] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
[    1.543919] ACPI: Power Button [PBTN]
[    1.544137] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input2
[    1.544524] ACPI: Sleep Button [SBTN]
[    1.544861] Monitor-Mwait will be used to enter C-1 state
[    1.544866] Monitor-Mwait will be used to enter C-2 state
[    1.544870] Monitor-Mwait will be used to enter C-3 state
[    1.544873] tsc: Marking TSC unstable due to TSC halts in idle
[    1.545213] clocksource: Switched to clocksource hpet
[    1.553952] thermal LNXTHERM:00: registered as thermal_zone0
[    1.554211] ACPI: Thermal Zone [THM] (62 C)
[    1.554540] battery: ACPI: Battery Slot [BAT0] (battery absent)
[    1.554632] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[    1.554877] battery: ACPI: Battery Slot [BAT1] (battery absent)
[    1.575857] 00:05: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[    1.579566] Linux agpgart interface v0.103
[    1.583278] loop: module loaded
[    1.583746] ata_piix 0000:00:1f.1: version 2.13
[    1.585052] scsi host0: ata_piix
[    1.585448] scsi host1: ata_piix
[    1.585665] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x6fa0 irq 14
[    1.585981] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x6fa8 irq 15
[    1.586629] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
[    1.590375] ata2: port disabled--ignoring
[    1.749412] ata1.00: ATAPI: HL-DT-STCD-RW/DVD-ROM GCC-T10N, A104, max UDMA/33
[    1.760845] scsi host2: ata_piix
[    1.771309] scsi host3: ata_piix
[    1.781454] ata3: SATA max UDMA/133 cmd 0x6eb0 ctl 0x6eb8 bmdma 0x6ee0 irq 18
[    1.781954] scsi 0:0:0:0: CD-ROM            HL-DT-ST CDRW/DVD GCCT10N A104 PQ: 0 ANSI: 5
[    1.791759] ata4: SATA max UDMA/133 cmd 0x6ec0 ctl 0x6ec8 bmdma 0x6ee8 irq 18
[    1.812934] libphy: Fixed MDIO Bus: probed
[    1.823345] tun: Universal TUN/TAP device driver, 1.6
[    1.833936] PPP generic driver version 2.4.2
[    1.844450] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.854981] ehci-pci: EHCI PCI platform driver
[    1.865699] ehci-pci 0000:00:1a.7: EHCI Host Controller
[    1.876128] ehci-pci 0000:00:1a.7: new USB bus registered, assigned bus number 1
[    1.886699] ehci-pci 0000:00:1a.7: debug port 1
[    1.901069] ehci-pci 0000:00:1a.7: cache line size of 64 is not supported
[    1.901084] ehci-pci 0000:00:1a.7: irq 22, io mem 0xfed1c400
[    1.930395] ehci-pci 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[    1.930857] sr 0:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray
[    1.940731] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.00
[    1.951083] cdrom: Uniform CD-ROM driver Revision: 3.20
[    1.961581] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.961583] usb usb1: Product: EHCI Host Controller
[    1.972404] sr 0:0:0:0: Attached scsi CD-ROM sr0
[    1.982652] usb usb1: Manufacturer: Linux 5.0.0-31-generic ehci_hcd
[    1.982654] usb usb1: SerialNumber: 0000:00:1a.7
[    1.982831] hub 1-0:1.0: USB hub found
[    1.993375] sr 0:0:0:0: Attached scsi generic sg0 type 5
[    2.003888] hub 1-0:1.0: 4 ports detected
[    2.045604] ehci-pci 0000:00:1d.7: EHCI Host Controller
[    2.055810] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 2
[    2.065970] ehci-pci 0000:00:1d.7: debug port 1
[    2.079746] ehci-pci 0000:00:1d.7: cache line size of 64 is not supported
[    2.079763] ehci-pci 0000:00:1d.7: irq 20, io mem 0xfed1c000
[    2.106536] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[    2.116188] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.00
[    2.125799] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.135401] usb usb2: Product: EHCI Host Controller
[    2.144944] usb usb2: Manufacturer: Linux 5.0.0-31-generic ehci_hcd
[    2.154531] usb usb2: SerialNumber: 0000:00:1d.7
[    2.164362] hub 2-0:1.0: USB hub found
[    2.173768] hub 2-0:1.0: 6 ports detected
[    2.183304] ehci-platform: EHCI generic platform driver
[    2.192595] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    2.201855] ohci-pci: OHCI PCI platform driver
[    2.210995] ohci-platform: OHCI generic platform driver
[    2.220195] uhci_hcd: USB Universal Host Controller Interface driver
[    2.229777] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[    2.239252] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
[    2.248768] uhci_hcd 0000:00:1a.0: detected 2 ports
[    2.258331] uhci_hcd 0000:00:1a.0: irq 20, io base 0x00006f20
[    2.267857] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.00
[    2.277499] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.287055] usb usb3: Product: UHCI Host Controller
[    2.296710] usb usb3: Manufacturer: Linux 5.0.0-31-generic uhci_hcd
[    2.306377] usb usb3: SerialNumber: 0000:00:1a.0
[    2.316053] hub 3-0:1.0: USB hub found
[    2.325377] hub 3-0:1.0: 2 ports detected
[    2.334911] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[    2.344137] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
[    2.353460] uhci_hcd 0000:00:1a.1: detected 2 ports
[    2.362641] uhci_hcd 0000:00:1a.1: irq 21, io base 0x00006f00
[    2.371803] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.00
[    2.381171] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.390537] usb usb4: Product: UHCI Host Controller
[    2.399892] usb usb4: Manufacturer: Linux 5.0.0-31-generic uhci_hcd
[    2.409355] usb usb4: SerialNumber: 0000:00:1a.1
[    2.418982] hub 4-0:1.0: USB hub found
[    2.428273] hub 4-0:1.0: 2 ports detected
[    2.437697] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[    2.446702] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5
[    2.455710] uhci_hcd 0000:00:1d.0: detected 2 ports
[    2.464581] uhci_hcd 0000:00:1d.0: irq 20, io base 0x00006f80
[    2.473457] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.00
[    2.482529] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.491631] usb usb5: Product: UHCI Host Controller
[    2.500684] usb usb5: Manufacturer: Linux 5.0.0-31-generic uhci_hcd
[    2.509810] usb usb5: SerialNumber: 0000:00:1d.0
[    2.519031] hub 5-0:1.0: USB hub found
[    2.528027] hub 5-0:1.0: 2 ports detected
[    2.537294] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[    2.546333] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6
[    2.555531] uhci_hcd 0000:00:1d.1: detected 2 ports
[    2.564530] uhci_hcd 0000:00:1d.1: irq 21, io base 0x00006f60
[    2.573465] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.00
[    2.582531] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.591582] usb usb6: Product: UHCI Host Controller
[    2.600579] usb usb6: Manufacturer: Linux 5.0.0-31-generic uhci_hcd
[    2.609680] usb usb6: SerialNumber: 0000:00:1d.1
[    2.618919] ata3.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    2.628202] ata3.01: SATA link down (SStatus 0 SControl 300)
[    2.637556] hub 6-0:1.0: USB hub found
[    2.646660] hub 6-0:1.0: 2 ports detected
[    2.656076] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[    2.665143] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7
[    2.674289] uhci_hcd 0000:00:1d.2: detected 2 ports
[    2.683369] ata3.00: ATA-8: ST9250311CS, SC1D, max UDMA/133
[    2.683380] uhci_hcd 0000:00:1d.2: irq 22, io base 0x00006f40
[    2.692451] ata3.00: 488397168 sectors, multi 8: LBA48 NCQ (depth 0/32)
[    2.710813] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.00
[    2.720148] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.720154] ata3.00: configured for UDMA/133
[    2.729387] usb usb7: Product: UHCI Host Controller
[    2.738732] scsi 2:0:0:0: Direct-Access     ATA      ST9250311CS      SC1D PQ: 0 ANSI: 5
[    2.747743] usb usb7: Manufacturer: Linux 5.0.0-31-generic uhci_hcd
[    2.757463] sd 2:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/233 GiB)
[    2.766745] usb usb7: SerialNumber: 0000:00:1d.2
[    2.776526] sd 2:0:0:0: Attached scsi generic sg1 type 0
[    2.786464] hub 7-0:1.0: USB hub found
[    2.795831] sd 2:0:0:0: [sda] Write Protect is off
[    2.805502] hub 7-0:1.0: 2 ports detected
[    2.815053] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    2.815109] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    2.824845] i8042: PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[    2.847448] serio: i8042 KBD port at 0x60,0x64 irq 1
[    2.857350] serio: i8042 AUX port at 0x60,0x64 irq 12
[    2.867346] mousedev: PS/2 mouse device common for all mice
[    2.877268]  sda: sda1
[    2.877501] rtc_cmos 00:02: RTC can wake from S4
[    2.887518] sd 2:0:0:0: [sda] Attached SCSI disk
[    2.897051] rtc_cmos 00:02: registered as rtc0
[    2.916407] usb 5-2: new low-speed USB device number 2 using uhci_hcd
[    2.926242] rtc_cmos 00:02: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[    2.936183] i2c /dev entries driver
[    2.936352] device-mapper: uevent: version 1.0.3
[    2.955841] device-mapper: ioctl: 4.39.0-ioctl (2018-04-03) initialised: dm-devel@redhat.com
[    2.965901] platform eisa.0: Probing EISA bus 0
[    2.975915] platform eisa.0: EISA: Cannot allocate resource for mainboard
[    2.986155] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
[    2.996599] platform eisa.0: Cannot allocate resource for EISA slot 1
[    3.007075] platform eisa.0: Cannot allocate resource for EISA slot 2
[    3.017400] platform eisa.0: Cannot allocate resource for EISA slot 3
[    3.027636] platform eisa.0: Cannot allocate resource for EISA slot 4
[    3.037582] platform eisa.0: Cannot allocate resource for EISA slot 5
[    3.047330] platform eisa.0: Cannot allocate resource for EISA slot 6
[    3.056875] platform eisa.0: Cannot allocate resource for EISA slot 7
[    3.066254] platform eisa.0: Cannot allocate resource for EISA slot 8
[    3.075479] platform eisa.0: EISA: Detected 0 cards
[    3.084630] ledtrig-cpu: registered to indicate activity on CPUs
[    3.094180] NET: Registered protocol family 10
[    3.112455] Segment Routing with IPv6
[    3.121710] NET: Registered protocol family 17
[    3.131004] Key type dns_resolver registered
[    3.140452] mce: Using 6 MCE banks
[    3.149583] RAS: Correctable Errors collector initialized.
[    3.158799] microcode: sig=0x6fd, pf=0x80, revision=0xa4
[    3.168052] microcode: Microcode Update Driver: v2.2.
[    3.168319] registered taskstats version 1
[    3.186371] usb 5-2: New USB device found, idVendor=093a, idProduct=2510, bcdDevice= 1.00
[    3.195474] usb 5-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    3.195486] ata4.01: failed to resume link (SControl 0)
[    3.204487] usb 5-2: Product: USB Optical Mouse
[    3.213532] ata4.00: SATA link down (SStatus 0 SControl 300)
[    3.222354] usb 5-2: Manufacturer: PixArt
[    3.222376] Loading compiled-in X.509 certificates
[    3.231225] ata4.01: SATA link down (SStatus 0 SControl 0)
[    3.253357] Loaded X.509 cert 'Build time autogenerated kernel key: f741e70acbe36b1401547c35fc32f1bcdd446f7a'
[    3.266522] zswap: loaded using pool lzo/zbud
[    3.275566] random: fast init done
[    3.293161] Key type big_key registered
[    3.302008] Key type trusted registered
[    3.314807] Key type encrypted registered
[    3.323175] AppArmor: AppArmor sha1 policy hashing enabled
[    3.331759] ima: No TPM chip found, activating TPM-bypass!
[    3.340332] ima: Allocated hash algorithm: sha1
[    3.348863] No architecture policies found
[    3.357395] evm: Initialising EVM extended attributes:
[    3.365975] evm: security.selinux
[    3.374483] evm: security.SMACK64
[    3.382812] evm: security.SMACK64EXEC
[    3.390921] evm: security.SMACK64TRANSMUTE
[    3.398852] evm: security.SMACK64MMAP
[    3.406665] evm: security.apparmor
[    3.414267] evm: security.ima
[    3.421587] evm: security.capability
[    3.428820] evm: HMAC attrs: 0x1
[    3.436355]   Magic number: 7:58:842
[    3.443350] rtc_cmos 00:02: setting system clock to 2019-10-22T15:48:53 UTC (1571759333)
[    3.451956] Unstable clock detected, switching default tracing clock to "global"
               If you want to keep using the local clock, then add:
                 "trace_clock=local"
               on the kernel command line
[    3.485523] Freeing unused decrypted memory: 2040K
[    3.495538] Freeing unused kernel image memory: 2588K
[    3.514404] Write protecting the kernel read-only data: 22528k
[    3.524218] Freeing unused kernel image memory: 2016K
[    3.533771] Freeing unused kernel image memory: 1740K
[    3.560387] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    3.568449] usb 7-1: new full-speed USB device number 2 using uhci_hcd
[    3.576610] x86/mm: Checking user space page tables
[    3.603027] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    3.611285] Run /init as init process
[    3.654711] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[    3.656013] random: udevadm: uninitialized urandom read (16 bytes read)
[    3.663469] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[    3.771646] usb 7-1: New USB device found, idVendor=0b97, idProduct=7761, bcdDevice= 1.10
[    3.780355] usb 7-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    3.797060] hub 7-1:1.0: USB hub found
[    3.812359] hub 7-1:1.0: 4 ports detected
[    3.843304] wmi_bus wmi_bus-PNP0C14:00: WQBC data block query control method not found
[    3.862073] tg3.c:v3.137 (May 11, 2014)
[    3.885952] hidraw: raw HID events driver (C) Jiri Kosina
[    3.898676] ssb: Found chip with id 0x4311, rev 0x01 and package 0x00
[    3.917586] tg3 0000:09:00.0 eth0: Tigon3 [partno(BCM95755m) rev a002] (PCI Express) MAC address 00:21:70:ba:da:dd
[    3.925352] usbcore: registered new interface driver usbhid
[    3.926508] tg3 0000:09:00.0 eth0: attached PHY is 5755 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[0])
[    3.926511] tg3 0000:09:00.0 eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
[    3.926514] tg3 0000:09:00.0 eth0: dma_rwctrl[76180000] dma_mask[64-bit]
[    3.935179] usbhid: USB HID core driver
[    3.974253] firewire_ohci 0000:03:01.4: added OHCI v1.10 device as card 0, 8 IR + 8 IT contexts, quirks 0x10
[    4.032016] tg3 0000:09:00.0 enp9s0: renamed from eth0
[    4.042236] b43-pci-bridge 0000:0c:00.0: Sonics Silicon Backplane found on PCI device 0000:0c:00.0
[    4.055396] input: PixArt USB Optical Mouse as /devices/pci0000:00/0000:00:1d.0/usb5/5-2/5-2:1.0/0003:093A:2510.0001/input/input6
[    4.076266] hid-generic 0003:093A:2510.0001: input,hidraw0: USB HID v1.11 Mouse [PixArt USB Optical Mouse] on usb-0000:00:1d.0-2/input0
[    4.178366] usb 7-1.2: new full-speed USB device number 3 using uhci_hcd
[    4.320693] usb 7-1.2: New USB device found, idVendor=0b97, idProduct=7772, bcdDevice= 1.10
[    4.332566] usb 7-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    4.344450] usb 7-1.2: Product: O2Micro CCID SC Reader
[    4.356575] usb 7-1.2: Manufacturer: O2
[    4.490768] firewire_core 0000:03:01.4: created device fw0: GUID 474fc0000ed60090, S400
[    5.362545] input: AlpsPS/2 ALPS DualPoint Stick as /devices/platform/i8042/serio1/input/input7
[    5.397564] input: AlpsPS/2 ALPS DualPoint TouchPad as /devices/platform/i8042/serio1/input/input5
[    9.915782] random: crng init done
[    9.919616] random: 7 urandom warning(s) missed due to ratelimiting
[   11.575743] atkbd serio0: Unknown key pressed (translated set 2, code 0x88 on isa0060/serio0).
[   11.579727] atkbd serio0: Use 'setkeycodes e008 <keycode>' to make it known.
[   14.572656] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[   16.785325] systemd[1]: systemd 237 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid)
[   16.830674] systemd[1]: Detected architecture x86-64.
[   16.924438] systemd[1]: Set hostname to <Latitude-D630-ubuntu>.
[   20.209925] systemd[1]: Created slice System Slice.
[   20.234289] systemd[1]: Listening on Journal Socket (/dev/log).
[   20.258131] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[   20.281496] systemd[1]: Listening on fsck to fsckd communication Socket.
[   20.304337] systemd[1]: Listening on udev Control Socket.
[   20.326591] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[   20.349163] systemd[1]: Reached target Remote File Systems.
[   20.770875] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[   21.407996] lp: driver loaded but no devices found
[   21.618777] ppdev: user-space parallel port driver
[   21.685932] systemd-journald[306]: Received request to flush runtime journal from PID 1
[   29.969601] audit: type=1400 audit(1571759360.024:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=418 comm="apparmor_parser"
[   29.969606] audit: type=1400 audit(1571759360.024:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=418 comm="apparmor_parser"
[   29.969610] audit: type=1400 audit(1571759360.024:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=418 comm="apparmor_parser"
[   29.969613] audit: type=1400 audit(1571759360.024:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=418 comm="apparmor_parser"
[   30.320856] audit: type=1400 audit(1571759360.372:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=421 comm="apparmor_parser"
[   30.320861] audit: type=1400 audit(1571759360.372:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_filter" pid=421 comm="apparmor_parser"
[   30.320864] audit: type=1400 audit(1571759360.372:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_groff" pid=421 comm="apparmor_parser"
[   30.665843] audit: type=1400 audit(1571759360.716:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-oopslash" pid=423 comm="apparmor_parser"
[   30.859190] audit: type=1400 audit(1571759360.912:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-senddoc" pid=424 comm="apparmor_parser"
[   31.217991] audit: type=1400 audit(1571759361.268:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/evince" pid=419 comm="apparmor_parser"
[   35.552751] kauditd_printk_skb: 23 callbacks suppressed
[   35.552753] audit: type=1400 audit(1571759365.604:35): apparmor="STATUS" operation="profile_load" profile="unconfined" name="snap-update-ns.gnome-characters" pid=466 comm="apparmor_parser"
[   36.245770] audit: type=1400 audit(1571759366.296:36): apparmor="STATUS" operation="profile_load" profile="unconfined" name="snap-update-ns.gnome-calculator" pid=465 comm="apparmor_parser"
[   37.399052] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[   37.406250] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[   37.879708] audit: type=1400 audit(1571759367.932:37): apparmor="STATUS" operation="profile_load" profile="unconfined" name="snap-update-ns.gnome-logs" pid=468 comm="apparmor_parser"
[   37.895308] audit: type=1400 audit(1571759367.948:38): apparmor="STATUS" operation="profile_load" profile="unconfined" name="snap-update-ns.gnome-system-monitor" pid=476 comm="apparmor_parser"
[   38.112589] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.3)
[   38.444556] dell-smbios A80593CE-A997-11DA-B012-B622A1EF5492: WMI SMBIOS userspace interface not supported(0), try upgrading to a newer BIOS
[   38.555345] input: Dell WMI hotkeys as /devices/platform/PNP0C14:00/wmi_bus/wmi_bus-PNP0C14:00/9DBB5994-A997-11DA-B012-B622A1EF5492/input/input8
[   38.610213] yenta_cardbus 0000:03:01.0: enabling device (0000 -> 0003)
[   38.610421] yenta_cardbus 0000:03:01.0: CardBus bridge found [1028:01f9]
[   38.610446] yenta_cardbus 0000:03:01.0: O2: enabling read prefetch/write burst. If you experience problems or performance issues, use the yenta_socket parameter 'o2_speedup=off'
[   38.747370] yenta_cardbus 0000:03:01.0: ISA IRQ mask 0x0cb8, PCI irq 19
[   38.747374] yenta_cardbus 0000:03:01.0: Socket status: 30000006
[   38.747382] yenta_cardbus 0000:03:01.0: pcmcia: parent PCI bridge window: [io  0x5000-0x5fff]
[   38.747384] yenta_cardbus 0000:03:01.0: pcmcia: parent PCI bridge window: [mem 0xf6a00000-0xf6afffff]
[   38.747387] pcmcia_socket pcmcia_socket0: cs: memory probe 0xf6a00000-0xf6afffff:
[   38.747396]  excluding 0xf6af0000-0xf6afffff
[   39.063242] kvm: disabled by bios
[   39.096552] kvm: disabled by bios
[   39.224258] b43-phy0: Broadcom 4311 WLAN found (core revision 10)
[   39.266380] b43-phy0: Found PHY: Analog 4, Type 2 (G), Revision 8
[   39.266401] b43-phy0: Found Radio: Manuf 0x17F, ID 0x2050, Revision 2, Version 0
[   39.266404] b43-phy0 warning: 5 GHz band is unsupported on this PHY
[   39.284356] Broadcom 43xx driver loaded [ Features: PNL ]
[   40.341492] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[   40.599937] intel_powerclamp: No package C-state available
[   40.630778] intel_powerclamp: No package C-state available
[   41.055847] snd_hda_codec_idt hdaudioC0D0: autoconfig for STAC9205: line_outs=1 (0xd/0x0/0x0/0x0/0x0) type:speaker
[   41.055851] snd_hda_codec_idt hdaudioC0D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[   41.055853] snd_hda_codec_idt hdaudioC0D0:    hp_outs=1 (0xa/0x0/0x0/0x0/0x0)
[   41.055855] snd_hda_codec_idt hdaudioC0D0:    mono: mono_out=0x0
[   41.055857] snd_hda_codec_idt hdaudioC0D0:    dig-out=0x21/0x0
[   41.055859] snd_hda_codec_idt hdaudioC0D0:    inputs:
[   41.055861] snd_hda_codec_idt hdaudioC0D0:      Internal Mic=0xc
[   41.055863] snd_hda_codec_idt hdaudioC0D0:      Mic=0xb
[   41.314264] input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[   41.314390] input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[   41.609177] VFIO - User Level meta-driver version: 0.3
[   42.207383] dell_laptop: Using i8042 filter function for receiving events
[   44.262702] pci 0000:00:00.0: Intel 965GM Chipset
[   44.262726] pci 0000:00:00.0: detected gtt size: 524288K total, 262144K mappable
[   44.263181] pci 0000:00:00.0: detected 8192K stolen memory
[   44.263234] checking generic (e0000000 300000) vs hw (e0000000 10000000)
[   44.263236] fb0: switching to inteldrmfb from VESA VGA
[   44.263276] Console: switching to colour dummy device 80x25
[   44.263474] [drm] Replacing VGA console driver
[   44.265976] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[   44.265977] [drm] Driver supports precise vblank timestamp query.
[   44.268079] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem
[   44.368545] [drm] forcing SVIDEO-1 connector off
[   44.385354] [drm] RC6 disabled, disabling runtime PM support
[   44.385486] [drm] Initialized overlay support.
[   44.386367] [drm] Initialized i915 1.6.0 20181204 for 0000:00:02.0 on minor 0
[   44.386736] ACPI: Video Device [VID1] (multi-head: yes  rom: no  post: no)
[   44.387155] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A03:00/LNXVIDEO:01/input/input11
[   44.387259] [Firmware Bug]: Duplicate ACPI video bus devices for the same VGA controller, please try module parameter "video.allow_duplicates=1"if the current driver doesn't work.
[   44.404774] fbcon: inteldrmfb (fb0) is primary device
[   45.252705] Console: switching to colour frame buffer device 160x50
[   45.272252] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[   45.903011] gpio_ich gpio_ich.1.auto: GPIO from 446 to 495
[   46.841884] pcmcia_socket pcmcia_socket0: cs: memory probe 0x0c0000-0x0fffff:
[   46.841894]  excluding 0xc0000-0xcffff 0xe0000-0xfffff
[   46.841928] pcmcia_socket pcmcia_socket0: cs: memory probe 0xa0000000-0xa0ffffff:
[   46.841945]  excluding 0xa0000000-0xa0ffffff
[   46.841967] pcmcia_socket pcmcia_socket0: cs: memory probe 0x60000000-0x60ffffff:
[   46.841989]  excluding 0x60000000-0x60ffffff
[   82.805657] tg3 0000:09:00.0 enp9s0: Link is up at 1000 Mbps, full duplex
[   82.805677] tg3 0000:09:00.0 enp9s0: Flow control is on for TX and on for RX
[   82.805705] IPv6: ADDRCONF(NETDEV_CHANGE): enp9s0: link becomes ready
[  188.282462] rfkill: input handler disabled
[  207.130578] Adding 524284k swap on /var/lib/systemd-swap/swapfc/1.  Priority:-2 extents:3 across:540668k FS
[  350.497076] perf: interrupt took too long (2506 > 2500), lowering kernel.perf_event_max_sample_rate to 79750

agu · Le 22/10/2019, à 18:08

@nany, "secure boot" désactivé dans le bios ???? où je le trouve, celui là ???

boot en filaire, le même temps qu'en wifi...le problème ne vient donc peut être pas de là !

nany · Le 22/10/2019, à 18:20

Presse [F2] lors du démarrage pour accéder au BIOS (ou EFI).

agu · Le 22/10/2019, à 18:40

entrer dans le BIOS n'est pas le problème ! Si "secure boot" veux dire "boot sequence"??? il est HDD, CD, USB
si ce n'est pas ça, je ne trouve pas d'option secure boot dans mon bios (dans la vidéo non plus)

nany · Le 22/10/2019, à 18:45

Dans la section security ?

xubu1957 · Le 22/10/2019, à 19:02

Une réponse avec :

bootctl

?

agu · Le 22/10/2019, à 19:25

bootctl
Couldn't find EFI system partition. It is recommended to mount it to /boot or /efi.
Alternatively, use --path= to specify path to mount point.
System:
    Not booted with EFI

nany · Le 22/10/2019, à 19:27

OK, c’est bel et bien un BIOS et non un EFI. Il n’y a donc pas de secure boot.

Donne, pour voir, le retour de :

sudo apt install --reinstall bcmwl-kernel-source

agu · Le 22/10/2019, à 19:46

sudo apt install --reinstall bcmwl-kernel-source
[sudo] Mot de passe de gullentops : 
Lecture des listes de paquets... Fait
Construction de l'arbre des dépendances       
Lecture des informations d'état... Fait
Les paquets supplémentaires suivants seront installés : 
  build-essential dkms dpkg-dev fakeroot g++ g++-7 gcc gcc-7
  libalgorithm-diff-perl libalgorithm-diff-xs-perl libalgorithm-merge-perl
  libasan4 libatomic1 libc-dev-bin libc6-dev libcilkrts5 libfakeroot
  libgcc-7-dev libitm1 liblsan0 libmpx2 libquadmath0 libstdc++-7-dev libtsan0
  libubsan0 linux-libc-dev make manpages-dev
Paquets suggérés :
  menu debian-keyring g++-multilib g++-7-multilib gcc-7-doc libstdc++6-7-dbg
  gcc-multilib autoconf automake libtool flex bison gcc-doc gcc-7-multilib
  gcc-7-locales libgcc1-dbg libgomp1-dbg libitm1-dbg libatomic1-dbg
  libasan4-dbg liblsan0-dbg libtsan0-dbg libubsan0-dbg libcilkrts5-dbg
  libmpx2-dbg libquadmath0-dbg glibc-doc libstdc++-7-doc make-doc
Les NOUVEAUX paquets suivants seront installés :
  bcmwl-kernel-source build-essential dkms dpkg-dev fakeroot g++ g++-7 gcc
  gcc-7 libalgorithm-diff-perl libalgorithm-diff-xs-perl
  libalgorithm-merge-perl libasan4 libatomic1 libc-dev-bin libc6-dev
  libcilkrts5 libfakeroot libgcc-7-dev libitm1 liblsan0 libmpx2 libquadmath0
  libstdc++-7-dev libtsan0 libubsan0 linux-libc-dev make manpages-dev
0 mis à jour, 29 nouvellement installés, 0 à enlever et 0 non mis à jour.
Il est nécessaire de prendre 28,6 Mo dans les archives.
Après cette opération, 126 Mo d'espace disque supplémentaires seront utilisés.
Souhaitez-vous continuer ? [O/n] o
Réception de :1 http://fr.archive.ubuntu.com/ubuntu bionic-updates/main amd64 libitm1 amd64 8.3.0-6ubuntu1~18.04.1 [28,0 kB]
Réception de :2 http://fr.archive.ubuntu.com/ubuntu bionic-updates/main amd64 libatomic1 amd64 8.3.0-6ubuntu1~18.04.1 [9184 B]
Réception de :3 http://fr.archive.ubuntu.com/ubuntu bionic-updates/main amd64 libasan4 amd64 7.4.0-1ubuntu1~18.04.1 [359 kB]
Réception de :4 http://fr.archive.ubuntu.com/ubuntu bionic-updates/main amd64 liblsan0 amd64 8.3.0-6ubuntu1~18.04.1 [133 kB]
Réception de :5 http://fr.archive.ubuntu.com/ubuntu bionic-updates/main amd64 libtsan0 amd64 8.3.0-6ubuntu1~18.04.1 [288 kB]
Réception de :6 http://fr.archive.ubuntu.com/ubuntu bionic-updates/main amd64 libubsan0 amd64 7.4.0-1ubuntu1~18.04.1 [126 kB]
Réception de :7 http://fr.archive.ubuntu.com/ubuntu bionic-updates/main amd64 libcilkrts5 amd64 7.4.0-1ubuntu1~18.04.1 [42,5 kB]
Réception de :8 http://fr.archive.ubuntu.com/ubuntu bionic-updates/main amd64 libmpx2 amd64 8.3.0-6ubuntu1~18.04.1 [11,6 kB]
Réception de :9 http://fr.archive.ubuntu.com/ubuntu bionic-updates/main amd64 libquadmath0 amd64 8.3.0-6ubuntu1~18.04.1 [133 kB]
Réception de :10 http://fr.archive.ubuntu.com/ubuntu bionic-updates/main amd64 libgcc-7-dev amd64 7.4.0-1ubuntu1~18.04.1 [2381 kB]
Réception de :11 http://fr.archive.ubuntu.com/ubuntu bionic-updates/main amd64 gcc-7 amd64 7.4.0-1ubuntu1~18.04.1 [7463 kB]
Réception de :12 http://fr.archive.ubuntu.com/ubuntu bionic-updates/main amd64 gcc amd64 4:7.4.0-1ubuntu2.3 [5184 B]
Réception de :13 http://fr.archive.ubuntu.com/ubuntu bionic/main amd64 make amd64 4.1-9.1ubuntu1 [154 kB]
Réception de :14 http://fr.archive.ubuntu.com/ubuntu bionic-updates/main amd64 dpkg-dev all 1.19.0.5ubuntu2.3 [607 kB]
Réception de :15 http://fr.archive.ubuntu.com/ubuntu bionic/main amd64 libc-dev-bin amd64 2.27-3ubuntu1 [71,8 kB]
Réception de :16 http://fr.archive.ubuntu.com/ubuntu bionic-updates/main amd64 linux-libc-dev amd64 4.15.0-65.74 [1130 kB]
Réception de :17 http://fr.archive.ubuntu.com/ubuntu bionic/main amd64 libc6-dev amd64 2.27-3ubuntu1 [2587 kB]
Réception de :18 http://fr.archive.ubuntu.com/ubuntu bionic-updates/main amd64 libstdc++-7-dev amd64 7.4.0-1ubuntu1~18.04.1 [1468 kB]
Réception de :19 http://fr.archive.ubuntu.com/ubuntu bionic-updates/main amd64 g++-7 amd64 7.4.0-1ubuntu1~18.04.1 [7574 kB]
Réception de :20 http://fr.archive.ubuntu.com/ubuntu bionic-updates/main amd64 g++ amd64 4:7.4.0-1ubuntu2.3 [1568 B]
Réception de :21 http://fr.archive.ubuntu.com/ubuntu bionic/main amd64 build-essential amd64 12.4ubuntu1 [4758 B]
Réception de :22 http://fr.archive.ubuntu.com/ubuntu bionic-updates/main amd64 dkms all 2.3-3ubuntu9.5 [68,1 kB]
Réception de :23 http://fr.archive.ubuntu.com/ubuntu bionic/restricted amd64 bcmwl-kernel-source amd64 6.30.223.271+bdcom-0ubuntu4 [1550 kB]
Réception de :24 http://fr.archive.ubuntu.com/ubuntu bionic/main amd64 libfakeroot amd64 1.22-2ubuntu1 [25,9 kB]
Réception de :25 http://fr.archive.ubuntu.com/ubuntu bionic/main amd64 fakeroot amd64 1.22-2ubuntu1 [62,3 kB]
Réception de :26 http://fr.archive.ubuntu.com/ubuntu bionic/main amd64 libalgorithm-diff-perl all 1.19.03-1 [47,6 kB]
Réception de :27 http://fr.archive.ubuntu.com/ubuntu bionic/main amd64 libalgorithm-diff-xs-perl amd64 0.04-5 [11,1 kB]
Réception de :28 http://fr.archive.ubuntu.com/ubuntu bionic/main amd64 libalgorithm-merge-perl all 0.08-3 [12,0 kB]
Réception de :29 http://fr.archive.ubuntu.com/ubuntu bionic/main amd64 manpages-dev all 4.15-1 [2217 kB]
28,6 Mo réceptionnés en 26s (1120 ko/s)                                       
Sélection du paquet libitm1:amd64 précédemment désélectionné.
(Lecture de la base de données... 164795 fichiers et répertoires déjà installés.)
Préparation du dépaquetage de .../00-libitm1_8.3.0-6ubuntu1~18.04.1_amd64.deb ...
Dépaquetage de libitm1:amd64 (8.3.0-6ubuntu1~18.04.1) ...
Sélection du paquet libatomic1:amd64 précédemment désélectionné.
Préparation du dépaquetage de .../01-libatomic1_8.3.0-6ubuntu1~18.04.1_amd64.deb ...
Dépaquetage de libatomic1:amd64 (8.3.0-6ubuntu1~18.04.1) ...
Sélection du paquet libasan4:amd64 précédemment désélectionné.
Préparation du dépaquetage de .../02-libasan4_7.4.0-1ubuntu1~18.04.1_amd64.deb ...
Dépaquetage de libasan4:amd64 (7.4.0-1ubuntu1~18.04.1) ...
Sélection du paquet liblsan0:amd64 précédemment désélectionné.
Préparation du dépaquetage de .../03-liblsan0_8.3.0-6ubuntu1~18.04.1_amd64.deb ...
Dépaquetage de liblsan0:amd64 (8.3.0-6ubuntu1~18.04.1) ...
Sélection du paquet libtsan0:amd64 précédemment désélectionné.
Préparation du dépaquetage de .../04-libtsan0_8.3.0-6ubuntu1~18.04.1_amd64.deb ...
Dépaquetage de libtsan0:amd64 (8.3.0-6ubuntu1~18.04.1) ...
Sélection du paquet libubsan0:amd64 précédemment désélectionné.
Préparation du dépaquetage de .../05-libubsan0_7.4.0-1ubuntu1~18.04.1_amd64.deb ...
Dépaquetage de libubsan0:amd64 (7.4.0-1ubuntu1~18.04.1) ...
Sélection du paquet libcilkrts5:amd64 précédemment désélectionné.
Préparation du dépaquetage de .../06-libcilkrts5_7.4.0-1ubuntu1~18.04.1_amd64.deb ...
Dépaquetage de libcilkrts5:amd64 (7.4.0-1ubuntu1~18.04.1) ...
Sélection du paquet libmpx2:amd64 précédemment désélectionné.
Préparation du dépaquetage de .../07-libmpx2_8.3.0-6ubuntu1~18.04.1_amd64.deb ...
Dépaquetage de libmpx2:amd64 (8.3.0-6ubuntu1~18.04.1) ...
Sélection du paquet libquadmath0:amd64 précédemment désélectionné.
Préparation du dépaquetage de .../08-libquadmath0_8.3.0-6ubuntu1~18.04.1_amd64.deb ...
Dépaquetage de libquadmath0:amd64 (8.3.0-6ubuntu1~18.04.1) ...
Sélection du paquet libgcc-7-dev:amd64 précédemment désélectionné.
Préparation du dépaquetage de .../09-libgcc-7-dev_7.4.0-1ubuntu1~18.04.1_amd64.deb ...
Dépaquetage de libgcc-7-dev:amd64 (7.4.0-1ubuntu1~18.04.1) ...
Sélection du paquet gcc-7 précédemment désélectionné.
Préparation du dépaquetage de .../10-gcc-7_7.4.0-1ubuntu1~18.04.1_amd64.deb ...
Dépaquetage de gcc-7 (7.4.0-1ubuntu1~18.04.1) ...
Sélection du paquet gcc précédemment désélectionné.
Préparation du dépaquetage de .../11-gcc_4%3a7.4.0-1ubuntu2.3_amd64.deb ...
Dépaquetage de gcc (4:7.4.0-1ubuntu2.3) ...
Sélection du paquet make précédemment désélectionné.
Préparation du dépaquetage de .../12-make_4.1-9.1ubuntu1_amd64.deb ...
Dépaquetage de make (4.1-9.1ubuntu1) ...
Sélection du paquet dpkg-dev précédemment désélectionné.
Préparation du dépaquetage de .../13-dpkg-dev_1.19.0.5ubuntu2.3_all.deb ...
Dépaquetage de dpkg-dev (1.19.0.5ubuntu2.3) ...
Sélection du paquet libc-dev-bin précédemment désélectionné.
Préparation du dépaquetage de .../14-libc-dev-bin_2.27-3ubuntu1_amd64.deb ...
Dépaquetage de libc-dev-bin (2.27-3ubuntu1) ...
Sélection du paquet linux-libc-dev:amd64 précédemment désélectionné.
Préparation du dépaquetage de .../15-linux-libc-dev_4.15.0-65.74_amd64.deb ...
Dépaquetage de linux-libc-dev:amd64 (4.15.0-65.74) ...
Sélection du paquet libc6-dev:amd64 précédemment désélectionné.
Préparation du dépaquetage de .../16-libc6-dev_2.27-3ubuntu1_amd64.deb ...
Dépaquetage de libc6-dev:amd64 (2.27-3ubuntu1) ...
Sélection du paquet libstdc++-7-dev:amd64 précédemment désélectionné.
Préparation du dépaquetage de .../17-libstdc++-7-dev_7.4.0-1ubuntu1~18.04.1_amd64.deb ...
Dépaquetage de libstdc++-7-dev:amd64 (7.4.0-1ubuntu1~18.04.1) ...
Sélection du paquet g++-7 précédemment désélectionné.
Préparation du dépaquetage de .../18-g++-7_7.4.0-1ubuntu1~18.04.1_amd64.deb ...
Dépaquetage de g++-7 (7.4.0-1ubuntu1~18.04.1) ...
Sélection du paquet g++ précédemment désélectionné.
Préparation du dépaquetage de .../19-g++_4%3a7.4.0-1ubuntu2.3_amd64.deb ...
Dépaquetage de g++ (4:7.4.0-1ubuntu2.3) ...
Sélection du paquet build-essential précédemment désélectionné.
Préparation du dépaquetage de .../20-build-essential_12.4ubuntu1_amd64.deb ...
Dépaquetage de build-essential (12.4ubuntu1) ...
Sélection du paquet dkms précédemment désélectionné.
Préparation du dépaquetage de .../21-dkms_2.3-3ubuntu9.5_all.deb ...
Dépaquetage de dkms (2.3-3ubuntu9.5) ...
Sélection du paquet bcmwl-kernel-source précédemment désélectionné.
Préparation du dépaquetage de .../22-bcmwl-kernel-source_6.30.223.271+bdcom-0ubuntu4_amd64.deb ...
Dépaquetage de bcmwl-kernel-source (6.30.223.271+bdcom-0ubuntu4) ...
Sélection du paquet libfakeroot:amd64 précédemment désélectionné.
Préparation du dépaquetage de .../23-libfakeroot_1.22-2ubuntu1_amd64.deb ...
Dépaquetage de libfakeroot:amd64 (1.22-2ubuntu1) ...
Sélection du paquet fakeroot précédemment désélectionné.
Préparation du dépaquetage de .../24-fakeroot_1.22-2ubuntu1_amd64.deb ...
Dépaquetage de fakeroot (1.22-2ubuntu1) ...
Sélection du paquet libalgorithm-diff-perl précédemment désélectionné.
Préparation du dépaquetage de .../25-libalgorithm-diff-perl_1.19.03-1_all.deb ...
Dépaquetage de libalgorithm-diff-perl (1.19.03-1) ...
Sélection du paquet libalgorithm-diff-xs-perl précédemment désélectionné.
Préparation du dépaquetage de .../26-libalgorithm-diff-xs-perl_0.04-5_amd64.deb ...
Dépaquetage de libalgorithm-diff-xs-perl (0.04-5) ...
Sélection du paquet libalgorithm-merge-perl précédemment désélectionné.
Préparation du dépaquetage de .../27-libalgorithm-merge-perl_0.08-3_all.deb ...
Dépaquetage de libalgorithm-merge-perl (0.08-3) ...
Sélection du paquet manpages-dev précédemment désélectionné.
Préparation du dépaquetage de .../28-manpages-dev_4.15-1_all.deb ...
Dépaquetage de manpages-dev (4.15-1) ...
Paramétrage de libquadmath0:amd64 (8.3.0-6ubuntu1~18.04.1) ...
Paramétrage de libatomic1:amd64 (8.3.0-6ubuntu1~18.04.1) ...
Paramétrage de make (4.1-9.1ubuntu1) ...
Paramétrage de libasan4:amd64 (7.4.0-1ubuntu1~18.04.1) ...
Paramétrage de libcilkrts5:amd64 (7.4.0-1ubuntu1~18.04.1) ...
Paramétrage de libubsan0:amd64 (7.4.0-1ubuntu1~18.04.1) ...
Paramétrage de libtsan0:amd64 (8.3.0-6ubuntu1~18.04.1) ...
Paramétrage de linux-libc-dev:amd64 (4.15.0-65.74) ...
Paramétrage de liblsan0:amd64 (8.3.0-6ubuntu1~18.04.1) ...
Paramétrage de libmpx2:amd64 (8.3.0-6ubuntu1~18.04.1) ...
Paramétrage de dpkg-dev (1.19.0.5ubuntu2.3) ...
Paramétrage de libfakeroot:amd64 (1.22-2ubuntu1) ...
Paramétrage de libalgorithm-diff-perl (1.19.03-1) ...
Paramétrage de libc-dev-bin (2.27-3ubuntu1) ...
Paramétrage de manpages-dev (4.15-1) ...
Paramétrage de libc6-dev:amd64 (2.27-3ubuntu1) ...
Paramétrage de libitm1:amd64 (8.3.0-6ubuntu1~18.04.1) ...
Paramétrage de fakeroot (1.22-2ubuntu1) ...
update-alternatives: utilisation de « /usr/bin/fakeroot-sysv » pour fournir « /usr/bin/fakeroot » (fakeroot) en mode automatique
Paramétrage de libgcc-7-dev:amd64 (7.4.0-1ubuntu1~18.04.1) ...
Paramétrage de libstdc++-7-dev:amd64 (7.4.0-1ubuntu1~18.04.1) ...
Paramétrage de libalgorithm-merge-perl (0.08-3) ...
Paramétrage de libalgorithm-diff-xs-perl (0.04-5) ...
Paramétrage de gcc-7 (7.4.0-1ubuntu1~18.04.1) ...
Paramétrage de g++-7 (7.4.0-1ubuntu1~18.04.1) ...
Paramétrage de gcc (4:7.4.0-1ubuntu2.3) ...
Paramétrage de dkms (2.3-3ubuntu9.5) ...
Paramétrage de g++ (4:7.4.0-1ubuntu2.3) ...
update-alternatives: utilisation de « /usr/bin/g++ » pour fournir « /usr/bin/c++ » (c++) en mode automatique
Paramétrage de build-essential (12.4ubuntu1) ...
Paramétrage de bcmwl-kernel-source (6.30.223.271+bdcom-0ubuntu4) ...
Loading new bcmwl-6.30.223.271+bdcom DKMS files...
Building for 5.0.0-31-generic
Building for architecture x86_64
Building initial module for 5.0.0-31-generic
Done.

wl:
Running module version sanity check.
 - Original module
   - No original module exists within this kernel
 - Installation
   - Installing to /lib/modules/5.0.0-31-generic/updates/dkms/

depmod..........

DKMS: install completed.
update-initramfs: deferring update (trigger activated)
Traitement des actions différées (« triggers ») pour man-db (2.8.3-2ubuntu0.1) ...
Traitement des actions différées (« triggers ») pour libc-bin (2.27-3ubuntu1) ...
Traitement des actions différées (« triggers ») pour initramfs-tools (0.130ubuntu3.8) ...
update-initramfs: Generating /boot/initrd.img-5.0.0-31-generic

nany · Le 22/10/2019, à 19:51

Bien, voyons ce que donne un redémarrage.

agu · Le 22/10/2019, à 20:52

toujours pareil !
en filaire: 2'33" pour l'apparition du pointeur souris et 3'13" pour l'interface graphique.

gullentops@Latitude-D630-ubuntu:~$

dmesg
[    0.000000] microcode: microcode updated early to revision 0xa4, date = 2010-10-02
[    0.000000] Linux version 5.0.0-31-generic (buildd@lgw01-amd64-046) (gcc version 7.4.0 (Ubuntu 7.4.0-1ubuntu1~18.04.1)) #33~18.04.1-Ubuntu SMP Tue Oct 1 10:20:39 UTC 2019 (Ubuntu 5.0.0-31.33~18.04.1-generic 5.0.21)
[    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-5.0.0-31-generic root=UUID=9ab1b663-d161-4020-8246-90baa9944e6b ro video=SVIDEO-1:d
[    0.000000] KERNEL supported cpus:
[    0.000000]   Intel GenuineIntel
[    0.000000]   AMD AuthenticAMD
[    0.000000]   Hygon HygonGenuine
[    0.000000]   Centaur CentaurHauls
[    0.000000] x86/fpu: x87 FPU will use FXSAVE
[    0.000000] BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009efff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009f000-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000bf65a7ff] usable
[    0.000000] BIOS-e820: [mem 0x00000000bf65a800-0x00000000bfffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec0ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed18000-0x00000000fed1bfff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed20000-0x00000000fed8ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000feda0000-0x00000000feda5fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee0ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ffe00000-0x00000000ffffffff] reserved
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] SMBIOS 2.4 present.
[    0.000000] DMI: Dell Inc. Latitude D630                   /0KU184, BIOS A17 01/04/2010
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.000000] tsc: Detected 1994.408 MHz processor
[    0.005022] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.005025] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.005032] last_pfn = 0xbf65a max_arch_pfn = 0x400000000
[    0.005039] MTRR default type: uncachable
[    0.005041] MTRR fixed ranges enabled:
[    0.005043]   00000-9FFFF write-back
[    0.005044]   A0000-BFFFF uncachable
[    0.005045]   C0000-CFFFF write-protect
[    0.005046]   D0000-EFFFF uncachable
[    0.005047]   F0000-FFFFF write-protect
[    0.005048] MTRR variable ranges enabled:
[    0.005051]   0 base 000000000 mask F80000000 write-back
[    0.005052]   1 base 080000000 mask FC0000000 write-back
[    0.005054]   2 base 0BF800000 mask FFF800000 uncachable
[    0.005055]   3 base 0BF700000 mask FFFF00000 uncachable
[    0.005056]   4 disabled
[    0.005057]   5 disabled
[    0.005058]   6 disabled
[    0.005059]   7 disabled
[    0.005760] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WP  UC- WT  
[    0.006130] total RAM covered: 3063M
[    0.006531] Found optimal setting for mtrr clean up
[    0.006533]  gran_size: 64K 	chunk_size: 16M 	num_reg: 4  	lose cover RAM: 0G
[    0.042477] check: Scanning 1 areas for low memory corruption
[    0.042488] BRK [0x7d001000, 0x7d001fff] PGTABLE
[    0.042492] BRK [0x7d002000, 0x7d002fff] PGTABLE
[    0.042494] BRK [0x7d003000, 0x7d003fff] PGTABLE
[    0.042542] BRK [0x7d004000, 0x7d004fff] PGTABLE
[    0.042545] BRK [0x7d005000, 0x7d005fff] PGTABLE
[    0.042759] BRK [0x7d006000, 0x7d006fff] PGTABLE
[    0.042811] RAMDISK: [mem 0x3331f000-0x35986fff]
[    0.042825] ACPI: Early table checksum verification disabled
[    0.048058] ACPI: RSDP 0x00000000000FBB10 000024 (v02 DELL  )
[    0.048063] ACPI: XSDT 0x00000000BF65D200 000064 (v01 DELL   M08      27DA0104 ASL  00000061)
[    0.048072] ACPI: FACP 0x00000000BF65D09C 0000F4 (v04 DELL   M08      27DA0104 ASL  00000061)
[    0.048081] ACPI: DSDT 0x00000000BF65D800 006114 (v02 INT430 SYSFexxx 00001001 INTL 20050624)
[    0.048087] ACPI: FACS 0x00000000BF66C000 000040
[    0.048091] ACPI: FACS 0x00000000BF66C000 000040
[    0.048096] ACPI: HPET 0x00000000BF65D300 000038 (v01 DELL   M08      00000001 ASL  00000061)
[    0.048102] ACPI: APIC 0x00000000BF65D400 000068 (v01 DELL   M08      27DA0104 ASL  00000047)
[    0.048107] ACPI: ASF! 0x00000000BF65D000 00007E (v32 DELL   M08      27DA0104 ASL  00000061)
[    0.048112] ACPI: MCFG 0x00000000BF65D3C0 00003E (v16 DELL   M08      27DA0104 ASL  00000061)
[    0.048118] ACPI: TCPA 0x00000000BF65D700 000032 (v01                 00000000 ASL  00000000)
[    0.048123] ACPI: SLIC 0x00000000BF65D49C 000176 (v01 DELL   M08      27DA0104 ASL  00000061)
[    0.048128] ACPI: SSDT 0x00000000BF65B9C0 0004CC (v01 PmRef  CpuPm    00003000 INTL 20050624)
[    0.048145] ACPI: Local APIC address 0xfee00000
[    0.048276] No NUMA configuration found
[    0.048278] Faking a node at [mem 0x0000000000000000-0x00000000bf659fff]
[    0.048294] NODE_DATA(0) allocated [mem 0xbf62f000-0xbf659fff]
[    0.048689] Zone ranges:
[    0.048691]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.048693]   DMA32    [mem 0x0000000001000000-0x00000000bf659fff]
[    0.048695]   Normal   empty
[    0.048697]   Device   empty
[    0.048698] Movable zone start for each node
[    0.048702] Early memory node ranges
[    0.048704]   node   0: [mem 0x0000000000001000-0x000000000009efff]
[    0.048706]   node   0: [mem 0x0000000000100000-0x00000000bf659fff]
[    0.048711] Zeroed struct page in unavailable ranges: 98 pages
[    0.048712] Initmem setup node 0 [mem 0x0000000000001000-0x00000000bf659fff]
[    0.048715] On node 0 totalpages: 783864
[    0.048716]   DMA zone: 64 pages used for memmap
[    0.048717]   DMA zone: 21 pages reserved
[    0.048719]   DMA zone: 3998 pages, LIFO batch:0
[    0.048872]   DMA32 zone: 12186 pages used for memmap
[    0.048874]   DMA32 zone: 779866 pages, LIFO batch:63
[    0.088411] Reserving Intel graphics memory at [mem 0xbf800000-0xbfffffff]
[    0.088677] ACPI: PM-Timer IO Port: 0x1008
[    0.088833] ACPI: Local APIC address 0xfee00000
[    0.088848] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[    0.088850] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[    0.088865] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[    0.088869] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.088872] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.088874] ACPI: IRQ0 used by override.
[    0.088876] ACPI: IRQ9 used by override.
[    0.088879] Using ACPI (MADT) for SMP configuration information
[    0.088882] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.088893] smpboot: Allowing 2 CPUs, 0 hotplug CPUs
[    0.088914] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.088917] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[    0.088918] PM: Registered nosave memory: [mem 0x000a0000-0x000fffff]
[    0.088922] [mem 0xc0000000-0xf7ffffff] available for PCI devices
[    0.088924] Booting paravirtualized kernel on bare hardware
[    0.088930] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[    0.088947] random: get_random_bytes called from start_kernel+0x97/0x516 with crng_init=0
[    0.088957] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:2 nr_cpu_ids:2 nr_node_ids:1
[    0.090473] percpu: Embedded 47 pages/cpu s155648 r8192 d28672 u1048576
[    0.090483] pcpu-alloc: s155648 r8192 d28672 u1048576 alloc=1*2097152
[    0.090485] pcpu-alloc: [0] 0 1 
[    0.090525] Built 1 zonelists, mobility grouping on.  Total pages: 771593
[    0.090527] Policy zone: DMA32
[    0.090531] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-5.0.0-31-generic root=UUID=9ab1b663-d161-4020-8246-90baa9944e6b ro video=SVIDEO-1:d
[    0.090694] Calgary: detecting Calgary via BIOS EBDA area
[    0.090695] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[    0.133778] Memory: 3013464K/3135456K available (14339K kernel code, 2335K rwdata, 4404K rodata, 2588K init, 5192K bss, 121992K reserved, 0K cma-reserved)
[    0.134041] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[    0.134058] Kernel/User page tables isolation: enabled
[    0.134101] ftrace: allocating 41614 entries in 163 pages
[    0.164229] rcu: Hierarchical RCU implementation.
[    0.164233] rcu: 	RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=2.
[    0.164235] 	Tasks RCU enabled.
[    0.164236] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
[    0.164238] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
[    0.168825] NR_IRQS: 524544, nr_irqs: 440, preallocated irqs: 16
[    0.169078] Console: colour dummy device 80x25
[    0.169289] printk: console [tty0] enabled
[    0.169319] ACPI: Core revision 20181213
[    0.169552] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[    0.169569] hpet clockevent registered
[    0.169576] APIC: Switch to symmetric I/O mode setup
[    0.170047] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.189575] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x397f174fe1b, max_idle_ns: 881590421226 ns
[    0.189597] Calibrating delay loop (skipped), value calculated using timer frequency.. 3988.81 BogoMIPS (lpj=7977632)
[    0.189603] pid_max: default: 32768 minimum: 301
[    0.189657] LSM: Security Framework initializing
[    0.189677] Yama: becoming mindful.
[    0.189704] AppArmor: AppArmor initialized
[    0.192313] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[    0.193945] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[    0.194057] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
[    0.194114] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
[    0.194546] mce: CPU0: Thermal monitoring enabled (TM2)
[    0.194553] process: using mwait in idle threads
[    0.194561] Last level iTLB entries: 4KB 128, 2MB 4, 4MB 4
[    0.194565] Last level dTLB entries: 4KB 256, 2MB 0, 4MB 32, 1GB 0
[    0.194569] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
[    0.194574] Spectre V2 : Mitigation: Full generic retpoline
[    0.194577] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[    0.194582] Speculative Store Bypass: Vulnerable
[    0.194629] MDS: Vulnerable: Clear CPU buffers attempted, no microcode
[    0.194849] Freeing SMP alternatives memory: 36K
[    0.308334] smpboot: CPU0: Intel(R) Core(TM)2 Duo CPU     T7250  @ 2.00GHz (family: 0x6, model: 0xf, stepping: 0xd)
[    0.308552] Performance Events: PEBS fmt0+, Core2 events, 4-deep LBR, Intel PMU driver.
[    0.308564] core: PEBS disabled due to CPU errata
[    0.308569] ... version:                2
[    0.308572] ... bit width:              40
[    0.308575] ... generic registers:      2
[    0.308578] ... value mask:             000000ffffffffff
[    0.308581] ... max period:             000000007fffffff
[    0.308584] ... fixed-purpose events:   3
[    0.308587] ... event mask:             0000000700000003
[    0.308655] rcu: Hierarchical SRCU implementation.
[    0.309580] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[    0.309580] smp: Bringing up secondary CPUs ...
[    0.309580] x86: Booting SMP configuration:
[    0.309580] .... node  #0, CPUs:      #1
[    0.309666] smp: Brought up 1 node, 2 CPUs
[    0.309666] smpboot: Max logical packages: 1
[    0.309666] smpboot: Total of 2 processors activated (7977.63 BogoMIPS)
[    0.311049] devtmpfs: initialized
[    0.311049] x86/mm: Memory block size: 128MB
[    0.311049] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[    0.311049] futex hash table entries: 512 (order: 3, 32768 bytes)
[    0.313648] pinctrl core: initialized pinctrl subsystem
[    0.313813] RTC time: 18:45:09, date: 2019-10-22
[    0.313994] NET: Registered protocol family 16
[    0.314129] audit: initializing netlink subsys (disabled)
[    0.314147] audit: type=2000 audit(1571769909.144:1): state=initialized audit_enabled=0 res=1
[    0.314147] EISA bus registered
[    0.314147] cpuidle: using governor ladder
[    0.314147] cpuidle: using governor menu
[    0.314147] ACPI: bus type PCI registered
[    0.314147] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.314147] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[    0.314147] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
[    0.314147] PCI: Using configuration type 1 for base access
[    0.316041] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[    0.316041] ACPI: Added _OSI(Module Device)
[    0.316041] ACPI: Added _OSI(Processor Device)
[    0.316041] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.316041] ACPI: Added _OSI(Processor Aggregator Device)
[    0.316041] ACPI: Added _OSI(Linux-Dell-Video)
[    0.316041] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
[    0.316041] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics)
[    0.324997] ACPI: 2 ACPI AML tables successfully acquired and loaded
[    0.337768] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
[    0.343542] ACPI: Dynamic OEM Table Load:
[    0.343553] ACPI: SSDT 0xFFFF953BBB1170C0 000043 (v01 LMPWR  DELLLOM  00001001 INTL 20050624)
[    0.344153] ACPI: Dynamic OEM Table Load:
[    0.344163] ACPI: SSDT 0xFFFF953BBB1F7400 000286 (v01 PmRef  Cpu0Ist  00003000 INTL 20050624)
[    0.344711] ACPI: Dynamic OEM Table Load:
[    0.344720] ACPI: SSDT 0xFFFF953BBB0E1000 0005E5 (v01 PmRef  Cpu0Cst  00003001 INTL 20050624)
[    0.345531] ACPI: Dynamic OEM Table Load:
[    0.345540] ACPI: SSDT 0xFFFF953BBB110900 0000C4 (v01 PmRef  Cpu1Ist  00003000 INTL 20050624)
[    0.345832] ACPI: Dynamic OEM Table Load:
[    0.345840] ACPI: SSDT 0xFFFF953BBB132600 000085 (v01 PmRef  Cpu1Cst  00003000 INTL 20050624)
[    0.346537] ACPI: Interpreter enabled
[    0.346565] ACPI: (supports S0 S3 S4 S5)
[    0.346569] ACPI: Using IOAPIC for interrupt routing
[    0.346611] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.346969] ACPI: Enabled 13 GPEs in block 00 to 1F
[    0.397711] acpi PNP0C15:00: ACPI dock station (docks/bays count: 1)
[    0.431344] acpi LNXIOBAY:00: ACPI dock station (docks/bays count: 2)
[    0.432386] acpi LNXIOBAY:01: ACPI dock station (docks/bays count: 3)
[    0.473847] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.473858] acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[    0.473882] acpi PNP0A03:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
[    0.488324] PCI host bridge to bus 0000:00
[    0.488331] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    0.488336] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.488340] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.488345] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000dffff window]
[    0.488350] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xf7ffffff window]
[    0.488355] pci_bus 0000:00: root bus resource [mem 0xfc000000-0xfebfffff window]
[    0.488360] pci_bus 0000:00: root bus resource [mem 0xfec10000-0xfecfffff window]
[    0.488365] pci_bus 0000:00: root bus resource [mem 0xfed1c000-0xfed1ffff window]
[    0.488370] pci_bus 0000:00: root bus resource [mem 0xfed90000-0xfed9ffff window]
[    0.488375] pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed44fff window]
[    0.488380] pci_bus 0000:00: root bus resource [mem 0xfeda7000-0xfedfffff window]
[    0.488384] pci_bus 0000:00: root bus resource [mem 0xfee10000-0xff9fffff window]
[    0.488389] pci_bus 0000:00: root bus resource [mem 0xffc00000-0xffdfffff window]
[    0.488394] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.488408] pci 0000:00:00.0: [8086:2a00] type 00 class 0x060000
[    0.488582] pci 0000:00:02.0: [8086:2a02] type 00 class 0x030000
[    0.488598] pci 0000:00:02.0: reg 0x10: [mem 0xf6e00000-0xf6efffff 64bit]
[    0.488607] pci 0000:00:02.0: reg 0x18: [mem 0xe0000000-0xefffffff 64bit pref]
[    0.488613] pci 0000:00:02.0: reg 0x20: [io  0xefe8-0xefef]
[    0.488772] pci 0000:00:02.1: [8086:2a03] type 00 class 0x038000
[    0.488787] pci 0000:00:02.1: reg 0x10: [mem 0xf6f00000-0xf6ffffff 64bit]
[    0.488998] pci 0000:00:1a.0: [8086:2834] type 00 class 0x0c0300
[    0.489063] pci 0000:00:1a.0: reg 0x20: [io  0x6f20-0x6f3f]
[    0.489235] pci 0000:00:1a.1: [8086:2835] type 00 class 0x0c0300
[    0.489299] pci 0000:00:1a.1: reg 0x20: [io  0x6f00-0x6f1f]
[    0.489480] pci 0000:00:1a.7: [8086:283a] type 00 class 0x0c0320
[    0.489509] pci 0000:00:1a.7: reg 0x10: [mem 0xfed1c400-0xfed1c7ff]
[    0.489620] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
[    0.489780] pci 0000:00:1b.0: [8086:284b] type 00 class 0x040300
[    0.489814] pci 0000:00:1b.0: reg 0x10: [mem 0xf6dfc000-0xf6dfffff 64bit]
[    0.489936] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.490105] pci 0000:00:1c.0: [8086:283f] type 01 class 0x060400
[    0.490239] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.490413] pci 0000:00:1c.1: [8086:2841] type 01 class 0x060400
[    0.490547] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[    0.490725] pci 0000:00:1c.5: [8086:2849] type 01 class 0x060400
[    0.490859] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
[    0.491034] pci 0000:00:1d.0: [8086:2830] type 00 class 0x0c0300
[    0.491098] pci 0000:00:1d.0: reg 0x20: [io  0x6f80-0x6f9f]
[    0.491266] pci 0000:00:1d.1: [8086:2831] type 00 class 0x0c0300
[    0.491331] pci 0000:00:1d.1: reg 0x20: [io  0x6f60-0x6f7f]
[    0.491502] pci 0000:00:1d.2: [8086:2832] type 00 class 0x0c0300
[    0.491566] pci 0000:00:1d.2: reg 0x20: [io  0x6f40-0x6f5f]
[    0.491751] pci 0000:00:1d.7: [8086:2836] type 00 class 0x0c0320
[    0.491780] pci 0000:00:1d.7: reg 0x10: [mem 0xfed1c000-0xfed1c3ff]
[    0.491889] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[    0.492037] pci 0000:00:1e.0: [8086:2448] type 01 class 0x060401
[    0.492265] pci 0000:00:1f.0: [8086:2815] type 00 class 0x060100
[    0.492392] pci 0000:00:1f.0: quirk: [io  0x1000-0x107f] claimed by ICH6 ACPI/GPIO/TCO
[    0.492403] pci 0000:00:1f.0: quirk: [io  0x1080-0x10bf] claimed by ICH6 GPIO
[    0.492410] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0900 (mask 007f)
[    0.492419] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 3 PIO at 0c80 (mask 003f)
[    0.492596] pci 0000:00:1f.1: [8086:2850] type 00 class 0x01018a
[    0.492620] pci 0000:00:1f.1: reg 0x10: [io  0x01f0-0x01f7]
[    0.492632] pci 0000:00:1f.1: reg 0x14: [io  0x03f4-0x03f7]
[    0.492644] pci 0000:00:1f.1: reg 0x18: [io  0x0170-0x0177]
[    0.492657] pci 0000:00:1f.1: reg 0x1c: [io  0x0374-0x0377]
[    0.492669] pci 0000:00:1f.1: reg 0x20: [io  0x6fa0-0x6faf]
[    0.492696] pci 0000:00:1f.1: legacy IDE quirk: reg 0x10: [io  0x01f0-0x01f7]
[    0.492701] pci 0000:00:1f.1: legacy IDE quirk: reg 0x14: [io  0x03f6]
[    0.492705] pci 0000:00:1f.1: legacy IDE quirk: reg 0x18: [io  0x0170-0x0177]
[    0.492710] pci 0000:00:1f.1: legacy IDE quirk: reg 0x1c: [io  0x0376]
[    0.492856] pci 0000:00:1f.2: [8086:2828] type 00 class 0x01018f
[    0.492883] pci 0000:00:1f.2: reg 0x10: [io  0x6eb0-0x6eb7]
[    0.492895] pci 0000:00:1f.2: reg 0x14: [io  0x6eb8-0x6ebb]
[    0.492907] pci 0000:00:1f.2: reg 0x18: [io  0x6ec0-0x6ec7]
[    0.492920] pci 0000:00:1f.2: reg 0x1c: [io  0x6ec8-0x6ecb]
[    0.492932] pci 0000:00:1f.2: reg 0x20: [io  0x6ee0-0x6eef]
[    0.492944] pci 0000:00:1f.2: reg 0x24: [io  0xeff0-0xefff]
[    0.492995] pci 0000:00:1f.2: PME# supported from D3hot
[    0.493140] pci 0000:00:1f.3: [8086:283e] type 00 class 0x0c0500
[    0.493164] pci 0000:00:1f.3: reg 0x10: [mem 0xf6dfbf00-0xf6dfbfff]
[    0.493207] pci 0000:00:1f.3: reg 0x20: [io  0x10c0-0x10df]
[    0.493446] pci 0000:00:1c.0: PCI bridge to [bus 0b]
[    0.493570] pci 0000:0c:00.0: [14e4:4312] type 00 class 0x028000
[    0.493615] pci 0000:0c:00.0: reg 0x10: [mem 0xf6cfc000-0xf6cfffff]
[    0.493720] pci 0000:0c:00.0: enabling Extended Tags
[    0.493825] pci 0000:0c:00.0: supports D1 D2
[    0.493943] pci 0000:0c:00.0: disabling ASPM on pre-1.1 PCIe device.  You can enable it with 'pcie_aspm=force'
[    0.493961] pci 0000:00:1c.1: PCI bridge to [bus 0c]
[    0.493971] pci 0000:00:1c.1:   bridge window [mem 0xf6c00000-0xf6cfffff]
[    0.494105] pci 0000:09:00.0: [14e4:1673] type 00 class 0x020000
[    0.494158] pci 0000:09:00.0: reg 0x10: [mem 0xf6bf0000-0xf6bfffff 64bit]
[    0.494247] pci 0000:09:00.0: enabling Extended Tags
[    0.494385] pci 0000:09:00.0: PME# supported from D3hot D3cold
[    0.494572] pci 0000:00:1c.5: PCI bridge to [bus 09]
[    0.494583] pci 0000:00:1c.5:   bridge window [mem 0xf6b00000-0xf6bfffff]
[    0.494618] pci_bus 0000:03: extended config space not accessible
[    0.494714] pci 0000:03:01.0: [1217:7135] type 02 class 0x060700
[    0.494738] pci 0000:03:01.0: reg 0x10: [mem 0x00000000-0x00000fff]
[    0.494787] pci 0000:03:01.0: supports D1 D2
[    0.494789] pci 0000:03:01.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.494892] pci 0000:03:01.4: [1217:00f7] type 00 class 0x0c0010
[    0.494914] pci 0000:03:01.4: reg 0x10: [mem 0xf6aff000-0xf6afffff]
[    0.494927] pci 0000:03:01.4: reg 0x14: [mem 0xf6afe800-0xf6afefff]
[    0.495020] pci 0000:03:01.4: supports D1 D2
[    0.495022] pci 0000:03:01.4: PME# supported from D0 D1 D2 D3hot D3cold
[    0.495159] pci 0000:00:1e.0: PCI bridge to [bus 03-04] (subtractive decode)
[    0.495170] pci 0000:00:1e.0:   bridge window [mem 0xf6a00000-0xf6afffff]
[    0.495179] pci 0000:00:1e.0:   bridge window [io  0x0000-0x0cf7 window] (subtractive decode)
[    0.495181] pci 0000:00:1e.0:   bridge window [io  0x0d00-0xffff window] (subtractive decode)
[    0.495183] pci 0000:00:1e.0:   bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
[    0.495185] pci 0000:00:1e.0:   bridge window [mem 0x000d0000-0x000dffff window] (subtractive decode)
[    0.495187] pci 0000:00:1e.0:   bridge window [mem 0xc0000000-0xf7ffffff window] (subtractive decode)
[    0.495189] pci 0000:00:1e.0:   bridge window [mem 0xfc000000-0xfebfffff window] (subtractive decode)
[    0.495191] pci 0000:00:1e.0:   bridge window [mem 0xfec10000-0xfecfffff window] (subtractive decode)
[    0.495193] pci 0000:00:1e.0:   bridge window [mem 0xfed1c000-0xfed1ffff window] (subtractive decode)
[    0.495194] pci 0000:00:1e.0:   bridge window [mem 0xfed90000-0xfed9ffff window] (subtractive decode)
[    0.495196] pci 0000:00:1e.0:   bridge window [mem 0xfed40000-0xfed44fff window] (subtractive decode)
[    0.495198] pci 0000:00:1e.0:   bridge window [mem 0xfeda7000-0xfedfffff window] (subtractive decode)
[    0.495200] pci 0000:00:1e.0:   bridge window [mem 0xfee10000-0xff9fffff window] (subtractive decode)
[    0.495202] pci 0000:00:1e.0:   bridge window [mem 0xffc00000-0xffdfffff window] (subtractive decode)
[    0.495240] pci_bus 0000:04: extended config space not accessible
[    0.495272] pci_bus 0000:04: busn_res: [bus 04] end can not be updated to 07
[    0.495277] pci 0000:00:1e.0: bridge has subordinate 04 but max busn 07
[    0.513430] ACPI: PCI Interrupt Link [LNKA] (IRQs 9 10 *11)
[    0.513601] ACPI: PCI Interrupt Link [LNKB] (IRQs 5 7) *3
[    0.513768] ACPI: PCI Interrupt Link [LNKC] (IRQs 9 *10 11)
[    0.513933] ACPI: PCI Interrupt Link [LNKD] (IRQs 5 7 9 10 *11)
[    0.514099] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
[    0.514267] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
[    0.514435] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
[    0.514581] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
[    0.515124] SCSI subsystem initialized
[    0.515124] libata version 3.00 loaded.
[    0.515124] pci 0000:00:02.0: vgaarb: setting as boot VGA device
[    0.515124] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[    0.515124] pci 0000:00:02.0: vgaarb: bridge control possible
[    0.515124] vgaarb: loaded
[    0.515124] ACPI: bus type USB registered
[    0.515124] usbcore: registered new interface driver usbfs
[    0.515124] usbcore: registered new interface driver hub
[    0.515124] usbcore: registered new device driver usb
[    0.515124] pps_core: LinuxPPS API ver. 1 registered
[    0.515124] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.515124] PTP clock support registered
[    0.515124] EDAC MC: Ver: 3.0.0
[    0.515124] PCI: Using ACPI for IRQ routing
[    0.520159] PCI: pci_cache_line_size set to 64 bytes
[    0.520246] e820: reserve RAM buffer [mem 0x0009f000-0x0009ffff]
[    0.520248] e820: reserve RAM buffer [mem 0xbf65a800-0xbfffffff]
[    0.520406] NetLabel: Initializing
[    0.520410] NetLabel:  domain hash size = 128
[    0.520413] NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
[    0.520443] NetLabel:  unlabeled traffic allowed by default
[    0.520471] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[    0.520471] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[    0.520471] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[    0.522624] clocksource: Switched to clocksource tsc-early
[    0.545317] VFS: Disk quotas dquot_6.6.0
[    0.545357] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.545573] AppArmor: AppArmor Filesystem Enabled
[    0.545630] pnp: PnP ACPI init
[    0.545781] pnp 00:00: Plug and Play ACPI device, IDs PNP0f13 (active)
[    0.545838] pnp 00:01: Plug and Play ACPI device, IDs PNP0303 (active)
[    0.545894] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.545995] system 00:03: [io  0x0c80-0x0caf] has been reserved
[    0.546002] system 00:03: [io  0x0cc0-0x0cff] could not be reserved
[    0.546012] system 00:03: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.546137] system 00:04: [mem 0xfed00000-0xfed003ff] has been reserved
[    0.546148] system 00:04: Plug and Play ACPI device, IDs PNP0103 PNP0c01 (active)
[    0.554332] pnp 00:05: Plug and Play ACPI device, IDs PNP0501 (active)
[    0.591174] system 00:06: [io  0x0cb0-0x0cbb] has been reserved
[    0.591182] system 00:06: [mem 0xfed40000-0xfed44fff] has been reserved
[    0.591192] system 00:06: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.594061] pnp 00:07: disabling [io  0x1000-0x1005] because it overlaps 0000:00:1f.0 BAR 13 [io  0x1000-0x107f]
[    0.594069] pnp 00:07: disabling [io  0x1008-0x100f] because it overlaps 0000:00:1f.0 BAR 13 [io  0x1000-0x107f]
[    0.594112] system 00:07: [io  0x0900-0x097f] has been reserved
[    0.594118] system 00:07: [io  0x04d0-0x04d1] has been reserved
[    0.594128] system 00:07: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.594169] pnp 00:08: disabling [io  0x1006-0x1007] because it overlaps 0000:00:1f.0 BAR 13 [io  0x1000-0x107f]
[    0.594177] pnp 00:08: disabling [io  0x100a-0x1059] because it overlaps 0000:00:1f.0 BAR 13 [io  0x1000-0x107f]
[    0.594184] pnp 00:08: disabling [io  0x1060-0x107f] because it overlaps 0000:00:1f.0 BAR 13 [io  0x1000-0x107f]
[    0.594192] pnp 00:08: disabling [io  0x1010-0x102f] because it overlaps 0000:00:1f.0 BAR 13 [io  0x1000-0x107f]
[    0.594233] system 00:08: [io  0xf400-0xf4fe] has been reserved
[    0.594239] system 00:08: [io  0x1080-0x10bf] has been reserved
[    0.594244] system 00:08: [io  0x10c0-0x10df] has been reserved
[    0.594249] system 00:08: [io  0x0809] has been reserved
[    0.594259] system 00:08: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.612997] system 00:09: [mem 0x00000000-0x0009efff] could not be reserved
[    0.613005] system 00:09: [mem 0x0009f000-0x0009ffff] could not be reserved
[    0.613010] system 00:09: [mem 0x000c0000-0x000cffff] could not be reserved
[    0.613016] system 00:09: [mem 0x000e0000-0x000fffff] could not be reserved
[    0.613022] system 00:09: [mem 0x00100000-0xbf65a7ff] could not be reserved
[    0.613027] system 00:09: [mem 0xbf65a800-0xbf6fffff] has been reserved
[    0.613033] system 00:09: [mem 0xbf700000-0xbf7fffff] has been reserved
[    0.613038] system 00:09: [mem 0xbf700000-0xbfefffff] could not be reserved
[    0.613044] system 00:09: [mem 0xffe00000-0xffffffff] has been reserved
[    0.613049] system 00:09: [mem 0xffa00000-0xffbfffff] has been reserved
[    0.613055] system 00:09: [mem 0xfec00000-0xfec0ffff] could not be reserved
[    0.613061] system 00:09: [mem 0xfee00000-0xfee0ffff] has been reserved
[    0.613066] system 00:09: [mem 0xfed20000-0xfed3ffff] has been reserved
[    0.613071] system 00:09: [mem 0xfed45000-0xfed8ffff] has been reserved
[    0.613077] system 00:09: [mem 0xfeda0000-0xfeda3fff] has been reserved
[    0.613082] system 00:09: [mem 0xfeda4000-0xfeda4fff] has been reserved
[    0.613088] system 00:09: [mem 0xfeda5000-0xfeda5fff] has been reserved
[    0.613093] system 00:09: [mem 0xfeda6000-0xfeda6fff] has been reserved
[    0.613099] system 00:09: [mem 0xfed18000-0xfed1bfff] has been reserved
[    0.613104] system 00:09: [mem 0xf8000000-0xfbffffff] has been reserved
[    0.613114] system 00:09: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.613201] pnp: PnP ACPI: found 10 devices
[    0.620159] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.620187] pci 0000:00:1c.0: bridge window [io  0x1000-0x0fff] to [bus 0b] add_size 1000
[    0.620191] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 0b] add_size 200000 add_align 100000
[    0.620194] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 0b] add_size 200000 add_align 100000
[    0.620205] pci 0000:00:1c.1: bridge window [io  0x1000-0x0fff] to [bus 0c] add_size 1000
[    0.620208] pci 0000:00:1c.1: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 0c] add_size 200000 add_align 100000
[    0.620220] pci 0000:00:1c.5: bridge window [io  0x1000-0x0fff] to [bus 09] add_size 1000
[    0.620223] pci 0000:00:1c.5: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 09] add_size 200000 add_align 100000
[    0.620243] pci 0000:00:1e.0: bridge window [io  0x1000-0x0fff] to [bus 03-04] add_size 1000
[    0.620258] pci 0000:00:1c.0: BAR 14: assigned [mem 0xc0000000-0xc01fffff]
[    0.620271] pci 0000:00:1c.0: BAR 15: assigned [mem 0xc0200000-0xc03fffff 64bit pref]
[    0.620283] pci 0000:00:1c.1: BAR 15: assigned [mem 0xc0400000-0xc05fffff 64bit pref]
[    0.620295] pci 0000:00:1c.5: BAR 15: assigned [mem 0xc0600000-0xc07fffff 64bit pref]
[    0.620302] pci 0000:00:1c.0: BAR 13: assigned [io  0x2000-0x2fff]
[    0.620309] pci 0000:00:1c.1: BAR 13: assigned [io  0x3000-0x3fff]
[    0.620315] pci 0000:00:1c.5: BAR 13: assigned [io  0x4000-0x4fff]
[    0.620321] pci 0000:00:1e.0: BAR 13: assigned [io  0x5000-0x5fff]
[    0.620329] pci 0000:00:1c.0: PCI bridge to [bus 0b]
[    0.620336] pci 0000:00:1c.0:   bridge window [io  0x2000-0x2fff]
[    0.620345] pci 0000:00:1c.0:   bridge window [mem 0xc0000000-0xc01fffff]
[    0.620353] pci 0000:00:1c.0:   bridge window [mem 0xc0200000-0xc03fffff 64bit pref]
[    0.620366] pci 0000:00:1c.1: PCI bridge to [bus 0c]
[    0.620372] pci 0000:00:1c.1:   bridge window [io  0x3000-0x3fff]
[    0.620381] pci 0000:00:1c.1:   bridge window [mem 0xf6c00000-0xf6cfffff]
[    0.620389] pci 0000:00:1c.1:   bridge window [mem 0xc0400000-0xc05fffff 64bit pref]
[    0.620401] pci 0000:00:1c.5: PCI bridge to [bus 09]
[    0.620407] pci 0000:00:1c.5:   bridge window [io  0x4000-0x4fff]
[    0.620416] pci 0000:00:1c.5:   bridge window [mem 0xf6b00000-0xf6bfffff]
[    0.620424] pci 0000:00:1c.5:   bridge window [mem 0xc0600000-0xc07fffff 64bit pref]
[    0.620440] pci 0000:03:01.0: BAR 0: assigned [mem 0xc4000000-0xc4000fff]
[    0.620451] pci 0000:03:01.0: BAR 15: assigned [mem 0xc8000000-0xcbffffff pref]
[    0.620458] pci 0000:03:01.0: BAR 16: assigned [mem 0xcc000000-0xcfffffff]
[    0.620463] pci 0000:03:01.0: BAR 13: assigned [io  0x5000-0x50ff]
[    0.620469] pci 0000:03:01.0: BAR 14: assigned [io  0x5400-0x54ff]
[    0.620475] pci 0000:03:01.0: CardBus bridge to [bus 04]
[    0.620479] pci 0000:03:01.0:   bridge window [io  0x5000-0x50ff]
[    0.620487] pci 0000:03:01.0:   bridge window [io  0x5400-0x54ff]
[    0.620495] pci 0000:03:01.0:   bridge window [mem 0xc8000000-0xcbffffff pref]
[    0.620504] pci 0000:03:01.0:   bridge window [mem 0xcc000000-0xcfffffff]
[    0.620513] pci 0000:00:1e.0: PCI bridge to [bus 03-04]
[    0.620519] pci 0000:00:1e.0:   bridge window [io  0x5000-0x5fff]
[    0.620529] pci 0000:00:1e.0:   bridge window [mem 0xf6a00000-0xf6afffff]
[    0.620544] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    0.620546] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    0.620548] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.620550] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff window]
[    0.620552] pci_bus 0000:00: resource 8 [mem 0xc0000000-0xf7ffffff window]
[    0.620553] pci_bus 0000:00: resource 9 [mem 0xfc000000-0xfebfffff window]
[    0.620555] pci_bus 0000:00: resource 10 [mem 0xfec10000-0xfecfffff window]
[    0.620557] pci_bus 0000:00: resource 11 [mem 0xfed1c000-0xfed1ffff window]
[    0.620559] pci_bus 0000:00: resource 12 [mem 0xfed90000-0xfed9ffff window]
[    0.620561] pci_bus 0000:00: resource 13 [mem 0xfed40000-0xfed44fff window]
[    0.620563] pci_bus 0000:00: resource 14 [mem 0xfeda7000-0xfedfffff window]
[    0.620565] pci_bus 0000:00: resource 15 [mem 0xfee10000-0xff9fffff window]
[    0.620566] pci_bus 0000:00: resource 16 [mem 0xffc00000-0xffdfffff window]
[    0.620568] pci_bus 0000:0b: resource 0 [io  0x2000-0x2fff]
[    0.620570] pci_bus 0000:0b: resource 1 [mem 0xc0000000-0xc01fffff]
[    0.620572] pci_bus 0000:0b: resource 2 [mem 0xc0200000-0xc03fffff 64bit pref]
[    0.620574] pci_bus 0000:0c: resource 0 [io  0x3000-0x3fff]
[    0.620576] pci_bus 0000:0c: resource 1 [mem 0xf6c00000-0xf6cfffff]
[    0.620578] pci_bus 0000:0c: resource 2 [mem 0xc0400000-0xc05fffff 64bit pref]
[    0.620580] pci_bus 0000:09: resource 0 [io  0x4000-0x4fff]
[    0.620581] pci_bus 0000:09: resource 1 [mem 0xf6b00000-0xf6bfffff]
[    0.620583] pci_bus 0000:09: resource 2 [mem 0xc0600000-0xc07fffff 64bit pref]
[    0.620585] pci_bus 0000:03: resource 0 [io  0x5000-0x5fff]
[    0.620587] pci_bus 0000:03: resource 1 [mem 0xf6a00000-0xf6afffff]
[    0.620589] pci_bus 0000:03: resource 4 [io  0x0000-0x0cf7 window]
[    0.620590] pci_bus 0000:03: resource 5 [io  0x0d00-0xffff window]
[    0.620592] pci_bus 0000:03: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.620594] pci_bus 0000:03: resource 7 [mem 0x000d0000-0x000dffff window]
[    0.620596] pci_bus 0000:03: resource 8 [mem 0xc0000000-0xf7ffffff window]
[    0.620598] pci_bus 0000:03: resource 9 [mem 0xfc000000-0xfebfffff window]
[    0.620600] pci_bus 0000:03: resource 10 [mem 0xfec10000-0xfecfffff window]
[    0.620602] pci_bus 0000:03: resource 11 [mem 0xfed1c000-0xfed1ffff window]
[    0.620603] pci_bus 0000:03: resource 12 [mem 0xfed90000-0xfed9ffff window]
[    0.620605] pci_bus 0000:03: resource 13 [mem 0xfed40000-0xfed44fff window]
[    0.620607] pci_bus 0000:03: resource 14 [mem 0xfeda7000-0xfedfffff window]
[    0.620609] pci_bus 0000:03: resource 15 [mem 0xfee10000-0xff9fffff window]
[    0.620611] pci_bus 0000:03: resource 16 [mem 0xffc00000-0xffdfffff window]
[    0.620613] pci_bus 0000:04: resource 0 [io  0x5000-0x50ff]
[    0.620614] pci_bus 0000:04: resource 1 [io  0x5400-0x54ff]
[    0.620616] pci_bus 0000:04: resource 2 [mem 0xc8000000-0xcbffffff pref]
[    0.620618] pci_bus 0000:04: resource 3 [mem 0xcc000000-0xcfffffff]
[    0.620789] NET: Registered protocol family 2
[    0.621037] tcp_listen_portaddr_hash hash table entries: 2048 (order: 3, 32768 bytes)
[    0.621074] TCP established hash table entries: 32768 (order: 6, 262144 bytes)
[    0.621210] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
[    0.621414] TCP: Hash tables configured (established 32768 bind 32768)
[    0.621488] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[    0.621520] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[    0.621662] NET: Registered protocol family 1
[    0.621673] NET: Registered protocol family 44
[    0.621692] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    0.624619] PCI: CLS 64 bytes, default 64
[    0.624691] Unpacking initramfs...
[    1.425429] Freeing initrd memory: 39328K
[    1.425734] check: Scanning for low memory corruption every 60 seconds
[    1.426716] Initialise system trusted keyrings
[    1.426734] Key type blacklist registered
[    1.426830] workingset: timestamp_bits=36 max_order=20 bucket_order=0
[    1.429668] zbud: loaded
[    1.430379] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    1.430758] fuse init (API version 7.28)
[    1.492190] Key type asymmetric registered
[    1.492200] Asymmetric key parser 'x509' registered
[    1.492227] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 243)
[    1.492282] io scheduler mq-deadline registered
[    1.493435] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[    1.493544] vesafb: mode is 1024x768x32, linelength=4096, pages=0
[    1.493548] vesafb: scrolling: redraw
[    1.493552] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[    1.493572] vesafb: framebuffer at 0xe0000000, mapped to 0x(____ptrval____), using 3072k, total 3072k
[    1.517644] Console: switching to colour frame buffer device 128x48
[    1.541820] fb0: VESA VGA frame buffer device
[    1.542044] intel_idle: does not run on family 6 model 15
[    1.542219] ACPI: AC Adapter [AC] (on-line)
[    1.542503] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0
[    1.542891] ACPI: Lid Switch [LID]
[    1.543102] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
[    1.543491] ACPI: Power Button [PBTN]
[    1.543713] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input2
[    1.544099] ACPI: Sleep Button [SBTN]
[    1.544434] Monitor-Mwait will be used to enter C-1 state
[    1.544444] Monitor-Mwait will be used to enter C-2 state
[    1.544452] Monitor-Mwait will be used to enter C-3 state
[    1.544457] tsc: Marking TSC unstable due to TSC halts in idle
[    1.544801] clocksource: Switched to clocksource hpet
[    1.553223] thermal LNXTHERM:00: registered as thermal_zone0
[    1.553483] ACPI: Thermal Zone [THM] (56 C)
[    1.553811] battery: ACPI: Battery Slot [BAT0] (battery absent)
[    1.553906] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[    1.554145] battery: ACPI: Battery Slot [BAT1] (battery absent)
[    1.575135] 00:05: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[    1.578859] Linux agpgart interface v0.103
[    1.582568] loop: module loaded
[    1.583026] ata_piix 0000:00:1f.1: version 2.13
[    1.584333] scsi host0: ata_piix
[    1.584727] scsi host1: ata_piix
[    1.584947] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x6fa0 irq 14
[    1.585263] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x6fa8 irq 15
[    1.585774] ata2: port disabled--ignoring
[    1.585993] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
[    1.748683] ata1.00: ATAPI: HL-DT-STCD-RW/DVD-ROM GCC-T10N, A104, max UDMA/33
[    1.754525] scsi host2: ata_piix
[    1.769568] scsi host3: ata_piix
[    1.779656] ata3: SATA max UDMA/133 cmd 0x6eb0 ctl 0x6eb8 bmdma 0x6ee0 irq 18
[    1.789988] ata4: SATA max UDMA/133 cmd 0x6ec0 ctl 0x6ec8 bmdma 0x6ee8 irq 18
[    1.800409] libphy: Fixed MDIO Bus: probed
[    1.810529] tun: Universal TUN/TAP device driver, 1.6
[    1.820878] PPP generic driver version 2.4.2
[    1.831091] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.841308] ehci-pci: EHCI PCI platform driver
[    1.851434] scsi 0:0:0:0: CD-ROM            HL-DT-ST CDRW/DVD GCCT10N A104 PQ: 0 ANSI: 5
[    1.851710] ehci-pci 0000:00:1a.7: EHCI Host Controller
[    1.872073] ehci-pci 0000:00:1a.7: new USB bus registered, assigned bus number 1
[    1.882505] ehci-pci 0000:00:1a.7: debug port 1
[    1.896709] ehci-pci 0000:00:1a.7: cache line size of 64 is not supported
[    1.896724] ehci-pci 0000:00:1a.7: irq 22, io mem 0xfed1c400
[    1.921646] ehci-pci 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[    1.931820] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.00
[    1.942124] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.952357] usb usb1: Product: EHCI Host Controller
[    1.962482] usb usb1: Manufacturer: Linux 5.0.0-31-generic ehci_hcd
[    1.972679] usb usb1: SerialNumber: 0000:00:1a.7
[    1.983019] hub 1-0:1.0: USB hub found
[    1.993064] hub 1-0:1.0: 4 ports detected
[    1.998015] sr 0:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray
[    2.003416] ehci-pci 0000:00:1d.7: EHCI Host Controller
[    2.012952] cdrom: Uniform CD-ROM driver Revision: 3.20
[    2.022946] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 2
[    2.033322] sr 0:0:0:0: Attached scsi CD-ROM sr0
[    2.043048] ehci-pci 0000:00:1d.7: debug port 1
[    2.043131] sr 0:0:0:0: Attached scsi generic sg0 type 5
[    2.056770] ehci-pci 0000:00:1d.7: cache line size of 64 is not supported
[    2.062676] ehci-pci 0000:00:1d.7: irq 20, io mem 0xfed1c000
[    2.085825] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[    2.095303] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.00
[    2.104773] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.114237] usb usb2: Product: EHCI Host Controller
[    2.123642] usb usb2: Manufacturer: Linux 5.0.0-31-generic ehci_hcd
[    2.133089] usb usb2: SerialNumber: 0000:00:1d.7
[    2.142621] hub 2-0:1.0: USB hub found
[    2.151893] hub 2-0:1.0: 6 ports detected
[    2.161316] ehci-platform: EHCI generic platform driver
[    2.170470] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    2.179589] ohci-pci: OHCI PCI platform driver
[    2.188587] ohci-platform: OHCI generic platform driver
[    2.197635] uhci_hcd: USB Universal Host Controller Interface driver
[    2.207082] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[    2.216430] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
[    2.225829] uhci_hcd 0000:00:1a.0: detected 2 ports
[    2.235271] uhci_hcd 0000:00:1a.0: irq 20, io base 0x00006f20
[    2.244686] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.00
[    2.254221] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.263670] usb usb3: Product: UHCI Host Controller
[    2.273220] usb usb3: Manufacturer: Linux 5.0.0-31-generic uhci_hcd
[    2.282774] usb usb3: SerialNumber: 0000:00:1a.0
[    2.292577] hub 3-0:1.0: USB hub found
[    2.302068] hub 3-0:1.0: 2 ports detected
[    2.311861] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[    2.321338] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
[    2.330848] uhci_hcd 0000:00:1a.1: detected 2 ports
[    2.340230] uhci_hcd 0000:00:1a.1: irq 21, io base 0x00006f00
[    2.349528] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.00
[    2.358918] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.368303] usb usb4: Product: UHCI Host Controller
[    2.377655] usb usb4: Manufacturer: Linux 5.0.0-31-generic uhci_hcd
[    2.387128] usb usb4: SerialNumber: 0000:00:1a.1
[    2.396764] hub 4-0:1.0: USB hub found
[    2.406040] hub 4-0:1.0: 2 ports detected
[    2.415554] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[    2.424702] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5
[    2.433937] uhci_hcd 0000:00:1d.0: detected 2 ports
[    2.443081] uhci_hcd 0000:00:1d.0: irq 20, io base 0x00006f80
[    2.452270] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.00
[    2.461750] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.471123] usb usb5: Product: UHCI Host Controller
[    2.480333] usb usb5: Manufacturer: Linux 5.0.0-31-generic uhci_hcd
[    2.489601] usb usb5: SerialNumber: 0000:00:1d.0
[    2.498882] hub 5-0:1.0: USB hub found
[    2.507939] hub 5-0:1.0: 2 ports detected
[    2.517271] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[    2.526297] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6
[    2.535481] uhci_hcd 0000:00:1d.1: detected 2 ports
[    2.544435] uhci_hcd 0000:00:1d.1: irq 21, io base 0x00006f60
[    2.553363] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.00
[    2.562451] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.571497] usb usb6: Product: UHCI Host Controller
[    2.580490] usb usb6: Manufacturer: Linux 5.0.0-31-generic uhci_hcd
[    2.589577] usb usb6: SerialNumber: 0000:00:1d.1
[    2.597703] ata3.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    2.598840] hub 6-0:1.0: USB hub found
[    2.607937] ata3.01: SATA link down (SStatus 0 SControl 300)
[    2.617068] hub 6-0:1.0: 2 ports detected
[    2.635847] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[    2.645065] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7
[    2.645607] random: fast init done
[    2.654362] uhci_hcd 0000:00:1d.2: detected 2 ports
[    2.664816] ata3.00: ATA-8: ST9250311CS, SC1D, max UDMA/133
[    2.672745] uhci_hcd 0000:00:1d.2: irq 22, io base 0x00006f40
[    2.682049] ata3.00: 488397168 sectors, multi 8: LBA48 NCQ (depth 0/32)
[    2.687123] ata3.00: configured for UDMA/133
[    2.691364] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.00
[    2.700766] scsi 2:0:0:0: Direct-Access     ATA      ST9250311CS      SC1D PQ: 0 ANSI: 5
[    2.709723] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.719435] sd 2:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/233 GiB)
[    2.728715] usb usb7: Product: UHCI Host Controller
[    2.738563] sd 2:0:0:0: Attached scsi generic sg1 type 0
[    2.748239] usb usb7: Manufacturer: Linux 5.0.0-31-generic uhci_hcd
[    2.748240] usb usb7: SerialNumber: 0000:00:1d.2
[    2.748400] hub 7-0:1.0: USB hub found
[    2.758165] sd 2:0:0:0: [sda] Write Protect is off
[    2.767970] hub 7-0:1.0: 2 ports detected
[    2.777908] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    2.777972] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    2.788131] i8042: PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[    2.838794]  sda: sda1
[    2.840497] serio: i8042 KBD port at 0x60,0x64 irq 1
[    2.849225] sd 2:0:0:0: [sda] Attached SCSI disk
[    2.858918] serio: i8042 AUX port at 0x60,0x64 irq 12
[    2.869023] usb 5-2: new low-speed USB device number 2 using uhci_hcd
[    2.879322] mousedev: PS/2 mouse device common for all mice
[    2.899956] rtc_cmos 00:02: RTC can wake from S4
[    2.910327] rtc_cmos 00:02: registered as rtc0
[    2.920369] rtc_cmos 00:02: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[    2.930528] i2c /dev entries driver
[    2.940712] device-mapper: uevent: version 1.0.3
[    2.950877] device-mapper: ioctl: 4.39.0-ioctl (2018-04-03) initialised: dm-devel@redhat.com
[    2.961244] platform eisa.0: Probing EISA bus 0
[    2.971657] platform eisa.0: EISA: Cannot allocate resource for mainboard
[    2.982195] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
[    2.985624] platform eisa.0: Cannot allocate resource for EISA slot 1
[    3.003704] platform eisa.0: Cannot allocate resource for EISA slot 2
[    3.014454] platform eisa.0: Cannot allocate resource for EISA slot 3
[    3.024851] platform eisa.0: Cannot allocate resource for EISA slot 4
[    3.035059] platform eisa.0: Cannot allocate resource for EISA slot 5
[    3.045050] platform eisa.0: Cannot allocate resource for EISA slot 6
[    3.054904] platform eisa.0: Cannot allocate resource for EISA slot 7
[    3.064593] platform eisa.0: Cannot allocate resource for EISA slot 8
[    3.074068] platform eisa.0: EISA: Detected 0 cards
[    3.083948] ledtrig-cpu: registered to indicate activity on CPUs
[    3.093732] NET: Registered protocol family 10
[    3.112500] Segment Routing with IPv6
[    3.121851] NET: Registered protocol family 17
[    3.130293] usb 5-2: New USB device found, idVendor=093a, idProduct=2510, bcdDevice= 1.00
[    3.140691] usb 5-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    3.140721] Key type dns_resolver registered
[    3.150237] usb 5-2: Product: USB Optical Mouse
[    3.169079] usb 5-2: Manufacturer: PixArt
[    3.178376] ata4.01: failed to resume link (SControl 0)
[    3.187750] ata4.00: SATA link down (SStatus 0 SControl 300)
[    3.196937] ata4.01: SATA link down (SStatus 0 SControl 0)
[    3.206024] mce: Using 6 MCE banks
[    3.214775] RAS: Correctable Errors collector initialized.
[    3.223542] microcode: sig=0x6fd, pf=0x80, revision=0xa4
[    3.232253] microcode: Microcode Update Driver: v2.2.
[    3.232551] registered taskstats version 1
[    3.249890] Loading compiled-in X.509 certificates
[    3.261555] Loaded X.509 cert 'Build time autogenerated kernel key: f741e70acbe36b1401547c35fc32f1bcdd446f7a'
[    3.270565] zswap: loaded using pool lzo/zbud
[    3.288405] Key type big_key registered
[    3.297311] Key type trusted registered
[    3.310360] Key type encrypted registered
[    3.318779] AppArmor: AppArmor sha1 policy hashing enabled
[    3.327140] ima: No TPM chip found, activating TPM-bypass!
[    3.335527] ima: Allocated hash algorithm: sha1
[    3.343890] No architecture policies found
[    3.352221] evm: Initialising EVM extended attributes:
[    3.360521] evm: security.selinux
[    3.368671] evm: security.SMACK64
[    3.376671] evm: security.SMACK64EXEC
[    3.384611] evm: security.SMACK64TRANSMUTE
[    3.392418] evm: security.SMACK64MMAP
[    3.400000] evm: security.apparmor
[    3.407488] evm: security.ima
[    3.414745] evm: security.capability
[    3.421767] evm: HMAC attrs: 0x1
[    3.429238]   Magic number: 7:823:797
[    3.436172] rtc_cmos 00:02: setting system clock to 2019-10-22T18:45:12 UTC (1571769912)
[    3.444335] Unstable clock detected, switching default tracing clock to "global"
               If you want to keep using the local clock, then add:
                 "trace_clock=local"
               on the kernel command line
[    3.476175] Freeing unused decrypted memory: 2040K
[    3.485388] Freeing unused kernel image memory: 2588K
[    3.505815] Write protecting the kernel read-only data: 22528k
[    3.515286] Freeing unused kernel image memory: 2016K
[    3.524395] Freeing unused kernel image memory: 1740K
[    3.550850] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    3.558704] x86/mm: Checking user space page tables
[    3.558751] usb 7-1: new full-speed USB device number 2 using uhci_hcd
[    3.585248] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    3.593111] Run /init as init process
[    3.635104] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[    3.636389] random: udevadm: uninitialized urandom read (16 bytes read)
[    3.643417] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[    3.751556] usb 7-1: New USB device found, idVendor=0b97, idProduct=7761, bcdDevice= 1.10
[    3.760032] usb 7-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    3.784637] hub 7-1:1.0: USB hub found
[    3.794569] hub 7-1:1.0: 4 ports detected
[    3.823459] wmi_bus wmi_bus-PNP0C14:00: WQBC data block query control method not found
[    3.846216] tg3.c:v3.137 (May 11, 2014)
[    3.856483] hidraw: raw HID events driver (C) Jiri Kosina
[    3.891002] usbcore: registered new interface driver usbhid
[    3.899722] usbhid: USB HID core driver
[    3.900589] tg3 0000:09:00.0 eth0: Tigon3 [partno(BCM95755m) rev a002] (PCI Express) MAC address 00:21:70:ba:da:dd
[    3.916433] tg3 0000:09:00.0 eth0: attached PHY is 5755 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[0])
[    3.925246] tg3 0000:09:00.0 eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
[    3.934389] tg3 0000:09:00.0 eth0: dma_rwctrl[76180000] dma_mask[64-bit]
[    3.943841] firewire_ohci 0000:03:01.4: added OHCI v1.10 device as card 0, 8 IR + 8 IT contexts, quirks 0x10
[    3.996472] tg3 0000:09:00.0 enp9s0: renamed from eth0
[    4.006615] input: PixArt USB Optical Mouse as /devices/pci0000:00/0000:00:1d.0/usb5/5-2/5-2:1.0/0003:093A:2510.0001/input/input6
[    4.026433] hid-generic 0003:093A:2510.0001: input,hidraw0: USB HID v1.11 Mouse [PixArt USB Optical Mouse] on usb-0000:00:1d.0-2/input0
[    4.133622] usb 7-1.2: new full-speed USB device number 3 using uhci_hcd
[    4.276597] usb 7-1.2: New USB device found, idVendor=0b97, idProduct=7772, bcdDevice= 1.10
[    4.287726] usb 7-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    4.298906] usb 7-1.2: Product: O2Micro CCID SC Reader
[    4.310151] usb 7-1.2: Manufacturer: O2
[    4.457772] firewire_core 0000:03:01.4: created device fw0: GUID 474fc0000ed60090, S400
[    4.720204] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[    5.325774] input: AlpsPS/2 ALPS DualPoint Stick as /devices/platform/i8042/serio1/input/input7
[    5.358889] input: AlpsPS/2 ALPS DualPoint TouchPad as /devices/platform/i8042/serio1/input/input5
[    6.595327] random: crng init done
[    6.607979] random: 7 urandom warning(s) missed due to ratelimiting
[    7.064914] systemd[1]: systemd 237 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid)
[    7.109790] systemd[1]: Detected architecture x86-64.
[    7.204028] systemd[1]: Set hostname to <Latitude-D630-ubuntu>.
[   10.632386] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[   10.659455] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[   10.686923] systemd[1]: Reached target Remote File Systems.
[   10.714640] systemd[1]: Created slice User and Session Slice.
[   10.742162] systemd[1]: Reached target Swap.
[   10.769005] systemd[1]: Reached target User and Group Name Lookups.
[   10.796202] systemd[1]: Created slice System Slice.
[   11.457748] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[   11.473119] lp: driver loaded but no devices found
[   11.513026] ppdev: user-space parallel port driver
[   12.113630] systemd-journald[297]: Received request to flush runtime journal from PID 1
[   21.811874] audit: type=1400 audit(1571769930.872:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=411 comm="apparmor_parser"
[   21.811881] audit: type=1400 audit(1571769930.872:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=411 comm="apparmor_parser"
[   21.811884] audit: type=1400 audit(1571769930.872:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=411 comm="apparmor_parser"
[   21.811887] audit: type=1400 audit(1571769930.872:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=411 comm="apparmor_parser"
[   22.170810] audit: type=1400 audit(1571769931.232:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=414 comm="apparmor_parser"
[   22.170821] audit: type=1400 audit(1571769931.232:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_filter" pid=414 comm="apparmor_parser"
[   22.170824] audit: type=1400 audit(1571769931.232:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_groff" pid=414 comm="apparmor_parser"
[   22.352069] audit: type=1400 audit(1571769931.412:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-oopslash" pid=415 comm="apparmor_parser"
[   22.537900] audit: type=1400 audit(1571769931.600:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-senddoc" pid=417 comm="apparmor_parser"
[   22.602776] audit: type=1400 audit(1571769931.664:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/evince" pid=412 comm="apparmor_parser"
[   26.444814] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[   26.568651] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[   27.010185] kauditd_printk_skb: 20 callbacks suppressed
[   27.010186] audit: type=1400 audit(1571769936.072:32): apparmor="STATUS" operation="profile_load" profile="unconfined" name="snap.gnome-logs.gnome-logs" pid=458 comm="apparmor_parser"
[   27.608352] audit: type=1400 audit(1571769936.668:33): apparmor="STATUS" operation="profile_load" profile="unconfined" name="snap.gnome-system-monitor.gnome-system-monitor" pid=459 comm="apparmor_parser"
[   27.786909] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.3)
[   27.909431] audit: type=1400 audit(1571769936.968:34): apparmor="STATUS" operation="profile_load" profile="unconfined" name="snap-update-ns.core" pid=473 comm="apparmor_parser"
[   28.052897] dell-smbios A80593CE-A997-11DA-B012-B622A1EF5492: WMI SMBIOS userspace interface not supported(0), try upgrading to a newer BIOS
[   28.074198] input: Dell WMI hotkeys as /devices/platform/PNP0C14:00/wmi_bus/wmi_bus-PNP0C14:00/9DBB5994-A997-11DA-B012-B622A1EF5492/input/input8
[   28.856224] wl: loading out-of-tree module taints kernel.
[   28.856230] wl: module license 'MIXED/Proprietary' taints kernel.
[   28.856231] Disabling lock debugging due to kernel taint
[   28.865048] wl: module verification failed: signature and/or required key missing - tainting kernel
[   28.923682] malloc in abgphy done
[   28.925927] malloc in abgphy done
[   28.926274] wl driver 6.30.223.271 (r587334) failed with code 21
[   28.926276] ERROR @wl_cfg80211_detach : 
[   28.926277] NULL ndev->ieee80211ptr, unable to deref wl
[   30.047222] audit: type=1400 audit(1571769939.108:35): apparmor="STATUS" operation="profile_load" profile="unconfined" name="snap-update-ns.gnome-characters" pid=484 comm="apparmor_parser"
[   30.795590] kvm: disabled by bios
[   30.827775] kvm: disabled by bios
[   30.988465] snd_hda_codec_idt hdaudioC0D0: autoconfig for STAC9205: line_outs=1 (0xd/0x0/0x0/0x0/0x0) type:speaker
[   30.988468] snd_hda_codec_idt hdaudioC0D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[   30.988471] snd_hda_codec_idt hdaudioC0D0:    hp_outs=1 (0xa/0x0/0x0/0x0/0x0)
[   30.988472] snd_hda_codec_idt hdaudioC0D0:    mono: mono_out=0x0
[   30.988474] snd_hda_codec_idt hdaudioC0D0:    dig-out=0x21/0x0
[   30.988476] snd_hda_codec_idt hdaudioC0D0:    inputs:
[   30.988479] snd_hda_codec_idt hdaudioC0D0:      Internal Mic=0xc
[   30.988481] snd_hda_codec_idt hdaudioC0D0:      Mic=0xb
[   31.063330] VFIO - User Level meta-driver version: 0.3
[   31.101758] yenta_cardbus 0000:03:01.0: enabling device (0000 -> 0003)
[   31.101903] yenta_cardbus 0000:03:01.0: CardBus bridge found [1028:01f9]
[   31.101928] yenta_cardbus 0000:03:01.0: O2: enabling read prefetch/write burst. If you experience problems or performance issues, use the yenta_socket parameter 'o2_speedup=off'
[   31.242481] yenta_cardbus 0000:03:01.0: ISA IRQ mask 0x0cb8, PCI irq 19
[   31.242485] yenta_cardbus 0000:03:01.0: Socket status: 30000006
[   31.242492] yenta_cardbus 0000:03:01.0: pcmcia: parent PCI bridge window: [io  0x5000-0x5fff]
[   31.242495] yenta_cardbus 0000:03:01.0: pcmcia: parent PCI bridge window: [mem 0xf6a00000-0xf6afffff]
[   31.242498] pcmcia_socket pcmcia_socket0: cs: memory probe 0xf6a00000-0xf6afffff:
[   31.242507]  excluding 0xf6af0000-0xf6afffff
[   31.851571] audit: type=1400 audit(1571769940.912:36): apparmor="STATUS" operation="profile_load" profile="unconfined" name="snap-update-ns.gnome-calculator" pid=481 comm="apparmor_parser"
[   32.210178] input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[   32.210273] input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[   32.530093] intel_powerclamp: No package C-state available
[   32.562031] intel_powerclamp: No package C-state available
[   33.342580] audit: type=1400 audit(1571769942.404:37): apparmor="STATUS" operation="profile_load" profile="unconfined" name="snap-update-ns.gnome-logs" pid=506 comm="apparmor_parser"
[   33.367586] dell_laptop: Using i8042 filter function for receiving events
[   33.541923] pci 0000:00:00.0: Intel 965GM Chipset
[   33.541944] pci 0000:00:00.0: detected gtt size: 524288K total, 262144K mappable
[   33.542404] pci 0000:00:00.0: detected 8192K stolen memory
[   33.542454] checking generic (e0000000 300000) vs hw (e0000000 10000000)
[   33.542455] fb0: switching to inteldrmfb from VESA VGA
[   33.542494] Console: switching to colour dummy device 80x25
[   33.542665] [drm] Replacing VGA console driver
[   33.546070] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[   33.546072] [drm] Driver supports precise vblank timestamp query.
[   33.547802] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem
[   33.647669] [drm] forcing SVIDEO-1 connector off
[   33.659297] [drm] RC6 disabled, disabling runtime PM support
[   33.659394] [drm] Initialized overlay support.
[   33.661085] [drm] Initialized i915 1.6.0 20181204 for 0000:00:02.0 on minor 0
[   33.661437] ACPI: Video Device [VID1] (multi-head: yes  rom: no  post: no)
[   33.661799] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A03:00/LNXVIDEO:01/input/input11
[   33.661906] [Firmware Bug]: Duplicate ACPI video bus devices for the same VGA controller, please try module parameter "video.allow_duplicates=1"if the current driver doesn't work.
[   33.680120] fbcon: inteldrmfb (fb0) is primary device
[   34.084176] audit: type=1400 audit(1571769943.144:38): apparmor="STATUS" operation="profile_load" profile="unconfined" name="snap-update-ns.gnome-system-monitor" pid=509 comm="apparmor_parser"
[   34.574265] Console: switching to colour frame buffer device 160x50
[   34.593581] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[   36.897755] gpio_ich gpio_ich.1.auto: GPIO from 462 to 511
[   37.803770] pcmcia_socket pcmcia_socket0: cs: memory probe 0x0c0000-0x0fffff:
[   37.803785]  excluding 0xc0000-0xcffff 0xe0000-0xfffff
[   37.803816] pcmcia_socket pcmcia_socket0: cs: memory probe 0xa0000000-0xa0ffffff:
[   37.803832]  excluding 0xa0000000-0xa0ffffff
[   37.803852] pcmcia_socket pcmcia_socket0: cs: memory probe 0x60000000-0x60ffffff:
[   37.803868]  excluding 0x60000000-0x60ffffff
[   83.462351] tg3 0000:09:00.0 enp9s0: Link is up at 1000 Mbps, full duplex
[   83.462354] tg3 0000:09:00.0 enp9s0: Flow control is on for TX and on for RX
[   83.462373] IPv6: ADDRCONF(NETDEV_CHANGE): enp9s0: link becomes ready
[  182.434539] rfkill: input handler disabled
[  204.625693] Adding 524284k swap on /var/lib/systemd-swap/swapfc/1.  Priority:-2 extents:3 across:540668k FS

nany · Le 22/10/2019, à 21:30

agu a écrit :

toujours pareil !

Grmpf ! Là je sèche.

Je réitère ma proposition.

nany a écrit :

Je te suggère de t’intéresser aux variantes plus légères telles que ubuntu mate, xubuntu voire lubuntu.

xubu1957 · Le 22/10/2019, à 21:42

En fait, il semblerait que Ubuntu 18.04 rencontre des problèmes lorsque l’ordinateur portable n’est pas connecté au cordon d’alimentation. -

Dans > askubuntu.com/questions/1029636/slow-boot-times-since-18-04-installation-on-dell-d630?noredirect

Ubuntu-fr

Navigation

Liens de recherche

Annonce

#126 Le 21/10/2019, à 22:02

Re : (résolu) Quelques problèmes avec ubuntu 18.04 sur Dell D630

#127 Le 22/10/2019, à 11:41

Re : (résolu) Quelques problèmes avec ubuntu 18.04 sur Dell D630

#128 Le 22/10/2019, à 11:49

Re : (résolu) Quelques problèmes avec ubuntu 18.04 sur Dell D630

#129 Le 22/10/2019, à 11:49

Re : (résolu) Quelques problèmes avec ubuntu 18.04 sur Dell D630

#130 Le 22/10/2019, à 12:03

Re : (résolu) Quelques problèmes avec ubuntu 18.04 sur Dell D630

#131 Le 22/10/2019, à 12:11

Re : (résolu) Quelques problèmes avec ubuntu 18.04 sur Dell D630

#132 Le 22/10/2019, à 12:31

Re : (résolu) Quelques problèmes avec ubuntu 18.04 sur Dell D630

#133 Le 22/10/2019, à 12:33

Re : (résolu) Quelques problèmes avec ubuntu 18.04 sur Dell D630

#134 Le 22/10/2019, à 12:50

Re : (résolu) Quelques problèmes avec ubuntu 18.04 sur Dell D630

#135 Le 22/10/2019, à 12:56

Re : (résolu) Quelques problèmes avec ubuntu 18.04 sur Dell D630

#136 Le 22/10/2019, à 13:25

Re : (résolu) Quelques problèmes avec ubuntu 18.04 sur Dell D630

#137 Le 22/10/2019, à 17:53

Re : (résolu) Quelques problèmes avec ubuntu 18.04 sur Dell D630

#138 Le 22/10/2019, à 17:56

Re : (résolu) Quelques problèmes avec ubuntu 18.04 sur Dell D630

#139 Le 22/10/2019, à 18:08

Re : (résolu) Quelques problèmes avec ubuntu 18.04 sur Dell D630

#140 Le 22/10/2019, à 18:20

Re : (résolu) Quelques problèmes avec ubuntu 18.04 sur Dell D630

#141 Le 22/10/2019, à 18:40

Re : (résolu) Quelques problèmes avec ubuntu 18.04 sur Dell D630

#142 Le 22/10/2019, à 18:45

Re : (résolu) Quelques problèmes avec ubuntu 18.04 sur Dell D630

#143 Le 22/10/2019, à 19:02

Re : (résolu) Quelques problèmes avec ubuntu 18.04 sur Dell D630

#144 Le 22/10/2019, à 19:25

Re : (résolu) Quelques problèmes avec ubuntu 18.04 sur Dell D630

#145 Le 22/10/2019, à 19:27

Re : (résolu) Quelques problèmes avec ubuntu 18.04 sur Dell D630

#146 Le 22/10/2019, à 19:46

Re : (résolu) Quelques problèmes avec ubuntu 18.04 sur Dell D630

#147 Le 22/10/2019, à 19:51

Re : (résolu) Quelques problèmes avec ubuntu 18.04 sur Dell D630

#148 Le 22/10/2019, à 20:52

Re : (résolu) Quelques problèmes avec ubuntu 18.04 sur Dell D630

#149 Le 22/10/2019, à 21:30

Re : (résolu) Quelques problèmes avec ubuntu 18.04 sur Dell D630

#150 Le 22/10/2019, à 21:42

Re : (résolu) Quelques problèmes avec ubuntu 18.04 sur Dell D630

Pied de page des forums