Contenu | Rechercher | Menus

Annonce

Si vous avez des soucis pour rester connecté, déconnectez-vous puis reconnectez-vous depuis ce lien en cochant la case
Me connecter automatiquement lors de mes prochaines visites.

À propos de l'équipe du forum.

#1 Le 24/11/2019, à 19:53

le moustachu

probleme busybox

bonjour.j'ai un inspiron 620 sous ubuntu 18.04 lts qui marchait a merveille jusqu'ici.sauf que la, au demarrage il ne veut plus démarrer:( il me dit :

busybox v1.27.2 (ubuntu 1:1.27.2-2ubuntu3.2) built-in shell (ash)
enter help for a list of built-in commands.
(initramfs)

mon probleme a l'air récurent mais je ne parvient pas a en trouver la solution.merci d'avance.je ne tiens pas aux données, je tiens a regler ce probleme

Hors ligne

#2 Le 25/11/2019, à 08:23

malbo

Re : probleme busybox

Si tu n'en as pas déjà une, je te prie de réaliser une LiveUSB de Ubuntu 18.04.1 (*) et de faire un Boot-info depuis une session live (ordi démarré sur cette LiveUSB, choix Essayer Ubuntu). Tu donneras l'URL de ce Boot-info dans ta réponse.

(*) pour la réaliser depuis un autre ordi équipé de Windows, voici ma recette : https://forum.ubuntu-fr.org/viewtopic.php?id=2028558

Dernière modification par malbo (Le 25/11/2019, à 08:30)

Hors ligne

#3 Le 27/11/2019, à 16:53

le moustachu

Re : probleme busybox

Hors ligne

#4 Le 28/11/2019, à 08:18

malbo

Re : probleme busybox

Bonjour,
Ton Boot-info est là :

Boot Info Script 8f991e4 + Boot-Repair extra info      [Boot-Info 25oct2017]


============================= Boot Info Summary: ===============================

 => Grub2 (v2.00) is installed in the MBR of /dev/sda and looks at sector 1 of 
    the same hard drive for core.img. core.img is at this location and looks 
    for (,msdos1)/boot/grub. It also embeds following components:
    
    modules
    ---------------------------------------------------------------------------
    fshelp ext2 part_msdos biosdisk
    ---------------------------------------------------------------------------
 => Syslinux MBR (5.00 and higher) is installed in the MBR of /dev/sdb.

sda1: __________________________________________________________________________

    File system:       ext4
    Boot sector type:  -
    Boot sector info: 
    Operating System:  Ubuntu 18.04.3 LTS
    Boot files:        /boot/grub/grub.cfg /etc/fstab 
                       /boot/grub/i386-pc/core.img

sdb1: __________________________________________________________________________

    File system:       vfat
    Boot sector type:  SYSLINUX 6.03
    Boot sector info:  Syslinux looks at sector 16392 of /dev/sdb1 for its 
                       second stage. The integrity check of Syslinux failed. 
                       No errors found in the Boot Parameter Block.
    Operating System:  
    Boot files:        /boot/grub/grub.cfg /syslinux.cfg 
                       /EFI/BOOT/grubx64.efi /ldlinux.sys

============================ Drive/Partition Info: =============================

Drive: sda _____________________________________________________________________
Disk /dev/sda: 1.8 TiB, 2000398934016 bytes, 3907029168 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disklabel type: dos

Partition  Boot  Start Sector    End Sector  # of Sectors  Id System

/dev/sda1    *          2,048 3,907,028,991 3,907,026,944  83 Linux


Drive: sdb _____________________________________________________________________
Disk /dev/sdb: 3.8 GiB, 4037017600 bytes, 7884800 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: dos

Partition  Boot  Start Sector    End Sector  # of Sectors  Id System

/dev/sdb1    *          2,048     7,884,799     7,882,752   c W95 FAT32 (LBA)


"blkid" output: ________________________________________________________________

Device           UUID                                   TYPE       LABEL

/dev/loop0                                              squashfs   
/dev/loop1                                              squashfs   
/dev/loop2                                              squashfs   
/dev/loop3                                              squashfs   
/dev/loop4                                              squashfs   
/dev/loop5                                              squashfs   
/dev/loop6                                              squashfs   
/dev/loop7                                              squashfs   
/dev/loop8                                              squashfs   
/dev/sda1        a6a77aae-aed5-4c02-97a3-28c520afdf95   ext4       
/dev/sdb1        A2C7-A5C7                              vfat       UBUNTU 18_0

========================= "ls -l /dev/disk/by-id" output: ======================

total 0
lrwxrwxrwx 1 root root  9 Nov 27 14:45 ata-HL-DT-ST_DVD+_-RW_GH82N_K4TC2PN1310 -> ../../sr0
lrwxrwxrwx 1 root root  9 Nov 27 14:51 ata-ST2000DM001-9YN164_Z1E0LD9Y -> ../../sda
lrwxrwxrwx 1 root root 10 Nov 27 14:51 ata-ST2000DM001-9YN164_Z1E0LD9Y-part1 -> ../../sda1
lrwxrwxrwx 1 root root  9 Nov 27 14:51 usb-Generic_Flash_Disk_B339404A-0:0 -> ../../sdb
lrwxrwxrwx 1 root root 10 Nov 27 14:51 usb-Generic_Flash_Disk_B339404A-0:0-part1 -> ../../sdb1
lrwxrwxrwx 1 root root  9 Nov 27 14:51 wwn-0x5000c5004057d1ab -> ../../sda
lrwxrwxrwx 1 root root 10 Nov 27 14:51 wwn-0x5000c5004057d1ab-part1 -> ../../sda1

================================ Mount points: =================================

Device           Mount_Point              Type       Options

/dev/loop0       /rofs                    squashfs   (ro,noatime)
/dev/sdb1        /cdrom                   vfat       (ro,noatime,fmask=0022,dmask=0022,codepage=437,iocharset=iso8859-1,shortname=mixed,errors=remount-ro)


=========================== sda1/boot/grub/grub.cfg: ===========================

--------------------------------------------------------------------------------
#
# DO NOT EDIT THIS FILE
#
# It is automatically generated by grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
#

### BEGIN /etc/grub.d/00_header ###
if [ -s $prefix/grubenv ]; then
  set have_grubenv=true
  load_env
fi
if [ "${next_entry}" ] ; then
   set default="${next_entry}"
   set next_entry=
   save_env next_entry
   set boot_once=true
else
   set default="0"
fi

if [ x"${feature_menuentry_id}" = xy ]; then
  menuentry_id_option="--id"
else
  menuentry_id_option=""
fi

export menuentry_id_option

if [ "${prev_saved_entry}" ]; then
  set saved_entry="${prev_saved_entry}"
  save_env saved_entry
  set prev_saved_entry=
  save_env prev_saved_entry
  set boot_once=true
fi

function savedefault {
  if [ -z "${boot_once}" ]; then
    saved_entry="${chosen}"
    save_env saved_entry
  fi
}
function recordfail {
  set recordfail=1
  if [ -n "${have_grubenv}" ]; then if [ -z "${boot_once}" ]; then save_env recordfail; fi; fi
}
function load_video {
  if [ x$feature_all_video_module = xy ]; then
    insmod all_video
  else
    insmod efi_gop
    insmod efi_uga
    insmod ieee1275_fb
    insmod vbe
    insmod vga
    insmod video_bochs
    insmod video_cirrus
  fi
}

if [ x$feature_default_font_path = xy ] ; then
   font=unicode
else
insmod part_msdos
insmod ext2
set root='hd0,msdos1'
if [ x$feature_platform_search_hint = xy ]; then
  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1  a6a77aae-aed5-4c02-97a3-28c520afdf95
else
  search --no-floppy --fs-uuid --set=root a6a77aae-aed5-4c02-97a3-28c520afdf95
fi
    font="/usr/share/grub/unicode.pf2"
fi

if loadfont $font ; then
  set gfxmode=auto
  load_video
  insmod gfxterm
  set locale_dir=$prefix/locale
  set lang=fr_FR
  insmod gettext
fi
terminal_output gfxterm
if [ "${recordfail}" = 1 ] ; then
  set timeout=30
else
  if [ x$feature_timeout_style = xy ] ; then
    set timeout_style=hidden
    set timeout=0
  # Fallback hidden-timeout code in case the timeout_style feature is
  # unavailable.
  elif sleep --interruptible 0 ; then
    set timeout=0
  fi
fi
### END /etc/grub.d/00_header ###

### BEGIN /etc/grub.d/05_debian_theme ###
set menu_color_normal=white/black
set menu_color_highlight=black/light-gray
if background_color 44,0,30,0; then
  clear
fi
### END /etc/grub.d/05_debian_theme ###

### BEGIN /etc/grub.d/10_linux ###
function gfxmode {
	set gfxpayload="${1}"
	if [ "${1}" = "keep" ]; then
		set vt_handoff=vt.handoff=1
	else
		set vt_handoff=
	fi
}
if [ "${recordfail}" != 1 ]; then
  if [ -e ${prefix}/gfxblacklist.txt ]; then
    if hwmatch ${prefix}/gfxblacklist.txt 3; then
      if [ ${match} = 0 ]; then
        set linux_gfx_mode=keep
      else
        set linux_gfx_mode=text
      fi
    else
      set linux_gfx_mode=text
    fi
  else
    set linux_gfx_mode=keep
  fi
else
  set linux_gfx_mode=text
fi
export linux_gfx_mode
menuentry 'Ubuntu' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-simple-a6a77aae-aed5-4c02-97a3-28c520afdf95' {
	recordfail
	load_video
	gfxmode $linux_gfx_mode
	insmod gzio
	if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
	insmod part_msdos
	insmod ext2
	set root='hd0,msdos1'
	if [ x$feature_platform_search_hint = xy ]; then
	  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1  a6a77aae-aed5-4c02-97a3-28c520afdf95
	else
	  search --no-floppy --fs-uuid --set=root a6a77aae-aed5-4c02-97a3-28c520afdf95
	fi
        linux	/boot/vmlinuz-5.0.0-36-generic root=UUID=a6a77aae-aed5-4c02-97a3-28c520afdf95 ro  quiet splash $vt_handoff
	initrd	/boot/initrd.img-5.0.0-36-generic
}
submenu 'Options avancées pour Ubuntu' $menuentry_id_option 'gnulinux-advanced-a6a77aae-aed5-4c02-97a3-28c520afdf95' {
	menuentry 'Ubuntu, avec Linux 5.0.0-36-generic' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-5.0.0-36-generic-advanced-a6a77aae-aed5-4c02-97a3-28c520afdf95' {
		recordfail
		load_video
		gfxmode $linux_gfx_mode
		insmod gzio
		if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
		insmod part_msdos
		insmod ext2
		set root='hd0,msdos1'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1  a6a77aae-aed5-4c02-97a3-28c520afdf95
		else
		  search --no-floppy --fs-uuid --set=root a6a77aae-aed5-4c02-97a3-28c520afdf95
		fi
		echo	'Chargement de Linux 5.0.0-36-generic…'
	        linux	/boot/vmlinuz-5.0.0-36-generic root=UUID=a6a77aae-aed5-4c02-97a3-28c520afdf95 ro  quiet splash $vt_handoff
		echo	'Chargement du disque mémoire initial…'
		initrd	/boot/initrd.img-5.0.0-36-generic
	}
	menuentry 'Ubuntu, with Linux 5.0.0-36-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-5.0.0-36-generic-recovery-a6a77aae-aed5-4c02-97a3-28c520afdf95' {
		recordfail
		load_video
		insmod gzio
		if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
		insmod part_msdos
		insmod ext2
		set root='hd0,msdos1'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1  a6a77aae-aed5-4c02-97a3-28c520afdf95
		else
		  search --no-floppy --fs-uuid --set=root a6a77aae-aed5-4c02-97a3-28c520afdf95
		fi
		echo	'Chargement de Linux 5.0.0-36-generic…'
	        linux	/boot/vmlinuz-5.0.0-36-generic root=UUID=a6a77aae-aed5-4c02-97a3-28c520afdf95 ro recovery nomodeset 
		echo	'Chargement du disque mémoire initial…'
		initrd	/boot/initrd.img-5.0.0-36-generic
	}
	menuentry 'Ubuntu, avec Linux 5.0.0-35-generic' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-5.0.0-35-generic-advanced-a6a77aae-aed5-4c02-97a3-28c520afdf95' {
		recordfail
		load_video
		gfxmode $linux_gfx_mode
		insmod gzio
		if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
		insmod part_msdos
		insmod ext2
		set root='hd0,msdos1'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1  a6a77aae-aed5-4c02-97a3-28c520afdf95
		else
		  search --no-floppy --fs-uuid --set=root a6a77aae-aed5-4c02-97a3-28c520afdf95
		fi
		echo	'Chargement de Linux 5.0.0-35-generic…'
	        linux	/boot/vmlinuz-5.0.0-35-generic root=UUID=a6a77aae-aed5-4c02-97a3-28c520afdf95 ro  quiet splash $vt_handoff
		echo	'Chargement du disque mémoire initial…'
		initrd	/boot/initrd.img-5.0.0-35-generic
	}
	menuentry 'Ubuntu, with Linux 5.0.0-35-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-5.0.0-35-generic-recovery-a6a77aae-aed5-4c02-97a3-28c520afdf95' {
		recordfail
		load_video
		insmod gzio
		if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
		insmod part_msdos
		insmod ext2
		set root='hd0,msdos1'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1  a6a77aae-aed5-4c02-97a3-28c520afdf95
		else
		  search --no-floppy --fs-uuid --set=root a6a77aae-aed5-4c02-97a3-28c520afdf95
		fi
		echo	'Chargement de Linux 5.0.0-35-generic…'
	        linux	/boot/vmlinuz-5.0.0-35-generic root=UUID=a6a77aae-aed5-4c02-97a3-28c520afdf95 ro recovery nomodeset 
		echo	'Chargement du disque mémoire initial…'
		initrd	/boot/initrd.img-5.0.0-35-generic
	}
}

### END /etc/grub.d/10_linux ###

### BEGIN /etc/grub.d/20_linux_xen ###

### END /etc/grub.d/20_linux_xen ###

### BEGIN /etc/grub.d/20_memtest86+ ###
menuentry 'Memory test (memtest86+)' {
	insmod part_msdos
	insmod ext2
	set root='hd0,msdos1'
	if [ x$feature_platform_search_hint = xy ]; then
	  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1  a6a77aae-aed5-4c02-97a3-28c520afdf95
	else
	  search --no-floppy --fs-uuid --set=root a6a77aae-aed5-4c02-97a3-28c520afdf95
	fi
	knetbsd	/boot/memtest86+.elf
}
menuentry 'Memory test (memtest86+, serial console 115200)' {
	insmod part_msdos
	insmod ext2
	set root='hd0,msdos1'
	if [ x$feature_platform_search_hint = xy ]; then
	  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1  a6a77aae-aed5-4c02-97a3-28c520afdf95
	else
	  search --no-floppy --fs-uuid --set=root a6a77aae-aed5-4c02-97a3-28c520afdf95
	fi
	linux16	/boot/memtest86+.bin console=ttyS0,115200n8
}
### END /etc/grub.d/20_memtest86+ ###

### BEGIN /etc/grub.d/30_os-prober ###
### END /etc/grub.d/30_os-prober ###

### BEGIN /etc/grub.d/30_uefi-firmware ###
### END /etc/grub.d/30_uefi-firmware ###

### BEGIN /etc/grub.d/40_custom ###
# This file provides an easy way to add custom menu entries.  Simply type the
# menu entries you want to add after this comment.  Be careful not to change
# the 'exec tail' line above.
### END /etc/grub.d/40_custom ###

### BEGIN /etc/grub.d/41_custom ###
if [ -f  ${config_directory}/custom.cfg ]; then
  source ${config_directory}/custom.cfg
elif [ -z "${config_directory}" -a -f  $prefix/custom.cfg ]; then
  source $prefix/custom.cfg;
fi
### END /etc/grub.d/41_custom ###
--------------------------------------------------------------------------------

=============================== sda1/etc/fstab: ================================

--------------------------------------------------------------------------------
# /etc/fstab: static file system information.
#
# Use 'blkid' to print the universally unique identifier for a
# device; this may be used with UUID= as a more robust way to name devices
# that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point>   <type>  <options>       <dump>  <pass>
# / was on /dev/sda1 during installation
UUID=a6a77aae-aed5-4c02-97a3-28c520afdf95 /               ext4    errors=remount-ro 0       1
/swapfile                                 none            swap    sw              0       0
--------------------------------------------------------------------------------

=================== sda1: Location of files loaded by Grub: ====================

           GiB - GB             File                                 Fragment(s)

1640.151824951 = 1761.099612160 boot/grub/grub.cfg                             3
1316.137050629 = 1413.191397376 boot/grub/i386-pc/core.img                     1
   3.884155273 = 4.170579968    boot/vmlinuz-5.0.0-35-generic                  1
1686.391967773 = 1810.749587456 boot/vmlinuz-5.0.0-36-generic                  1
1686.391967773 = 1810.749587456 vmlinuz                                        1
   3.884155273 = 4.170579968    vmlinuz.old                                    1
1686.257736206 = 1810.605457408 boot/initrd.img-5.0.0-35-generic               3
 918.835868835 = 986.592501760  boot/initrd.img-5.0.0-36-generic               4
 918.835868835 = 986.592501760  initrd.img                                     4
1686.257736206 = 1810.605457408 initrd.img.old                                 3

=========================== sdb1/boot/grub/grub.cfg: ===========================

--------------------------------------------------------------------------------

if loadfont /boot/grub/font.pf2 ; then
	set gfxmode=auto
	insmod efi_gop
	insmod efi_uga
	insmod gfxterm
	terminal_output gfxterm
fi

set menu_color_normal=white/black
set menu_color_highlight=black/light-gray

set timeout=5
menuentry "Try Ubuntu without installing" {
	set gfxpayload=keep
	linux	/casper/vmlinuz  file=/cdrom/preseed/ubuntu.seed boot=casper quiet splash ---
	initrd	/casper/initrd
}
menuentry "Install Ubuntu" {
	set gfxpayload=keep
	linux	/casper/vmlinuz  file=/cdrom/preseed/ubuntu.seed boot=casper only-ubiquity quiet splash ---
	initrd	/casper/initrd
}
menuentry "OEM install (for manufacturers)" {
	set gfxpayload=keep
	linux	/casper/vmlinuz  file=/cdrom/preseed/ubuntu.seed boot=casper only-ubiquity quiet splash oem-config/enable=true ---
	initrd	/casper/initrd
}
menuentry "Check disc for defects" {
	set gfxpayload=keep
	linux	/casper/vmlinuz  boot=casper integrity-check quiet splash ---
	initrd	/casper/initrd
}
--------------------------------------------------------------------------------

============================== sdb1/syslinux.cfg: ==============================

--------------------------------------------------------------------------------
DEFAULT loadconfig

LABEL loadconfig
  CONFIG /isolinux/isolinux.cfg
  APPEND /isolinux/
--------------------------------------------------------------------------------

=================== sdb1: Location of files loaded by Grub: ====================

           GiB - GB             File                                 Fragment(s)

            ?? = ??             boot/grub/grub.cfg                             1

================= sdb1: Location of files loaded by Syslinux: ==================

           GiB - GB             File                                 Fragment(s)

            ?? = ??             syslinux.cfg                                   1
            ?? = ??             ldlinux.sys                                    1

=============================== StdErr Messages: ===============================

File descriptor 10 (/proc/7212/mountinfo) leaked on lvs invocation. Parent PID 13896: bash
File descriptor 63 (pipe:[82155]) leaked on lvs invocation. Parent PID 13896: bash

ADDITIONAL INFORMATION :
=================== log of boot-info 20191127_1451 ===================
boot-info version : 4ppa66
boot-sav version : 4ppa66
boot-sav-extra version : 4ppa66
glade2script version : 3.2.3~ppa4
boot-info is executed in live-session (Ubuntu 18.04.3 LTS, bionic, Ubuntu, x86_64)
CPU op-mode(s):      32-bit, 64-bit
file=/cdrom/preseed/ubuntu.seed boot=casper initrd=/casper/initrd quiet splash --- maybe-ubiquity
ls: impossible d'accéder à '/home/usr/.config': Aucun fichier ou dossier de ce type

=================== os-prober:
/dev/sda1:Ubuntu 18.04.3 LTS (18.04):Ubuntu:linux

=================== blkid:
/dev/sda1: UUID="a6a77aae-aed5-4c02-97a3-28c520afdf95" TYPE="ext4" PARTUUID="630ee82c-01"
/dev/sdb1: LABEL="UBUNTU 18_0" UUID="A2C7-A5C7" TYPE="vfat" PARTUUID="0121ef53-01"
/dev/loop0: TYPE="squashfs"
/dev/loop1: TYPE="squashfs"
/dev/loop2: TYPE="squashfs"
/dev/loop3: TYPE="squashfs"
/dev/loop4: TYPE="squashfs"
/dev/loop5: TYPE="squashfs"
/dev/loop6: TYPE="squashfs"
/dev/loop7: TYPE="squashfs"
/dev/loop8: TYPE="squashfs"


1 disks with OS, 1 OS : 1 Linux, 0 MacOS, 0 Windows, 0 unknown type OS.


=================== sda1/etc/grub.d/ :
drwxr-xr-x  2 root root     4096 août   5 19:03 grub.d
total 80
-rwxr-xr-x 1 root root 10046 mars  18  2019 00_header
-rwxr-xr-x 1 root root  6258 mars  18  2019 05_debian_theme
-rwxr-xr-x 1 root root 12693 mars  18  2019 10_linux
-rwxr-xr-x 1 root root 11298 mars  18  2019 20_linux_xen
-rwxr-xr-x 1 root root  1992 janv. 28  2016 20_memtest86+
-rwxr-xr-x 1 root root 12059 mars  18  2019 30_os-prober
-rwxr-xr-x 1 root root  1418 mars  18  2019 30_uefi-firmware
-rwxr-xr-x 1 root root   214 mars  18  2019 40_custom
-rwxr-xr-x 1 root root   216 mars  18  2019 41_custom
-rw-r--r-- 1 root root   483 mars  18  2019 README




=================== sda1/etc/default/grub :

# If you change this file, run 'update-grub' afterwards to update
# /boot/grub/grub.cfg.
# For full documentation of the options in this file, see:
#   info -f grub -n 'Simple configuration'

GRUB_DEFAULT=0
GRUB_TIMEOUT_STYLE=hidden
GRUB_TIMEOUT=0
GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian`
GRUB_CMDLINE_LINUX_DEFAULT="quiet splash"
GRUB_CMDLINE_LINUX=""

# Uncomment to enable BadRAM filtering, modify to suit your needs
# This works with Linux (no patch required) and with any kernel that obtains
# the memory map information from GRUB (GNU Mach, kernel of FreeBSD ...)
#GRUB_BADRAM="0x01234567,0xfefefefe,0x89abcdef,0xefefefef"

# Uncomment to disable graphical terminal (grub-pc only)
#GRUB_TERMINAL=console

# The resolution used on graphical terminal
# note that you can use only modes which your graphic card supports via VBE
# you can see them in real GRUB with the command `vbeinfo'
#GRUB_GFXMODE=640x480

# Uncomment if you don't want GRUB to pass "root=UUID=xxx" parameter to Linux
#GRUB_DISABLE_LINUX_UUID=true

# Uncomment to disable generation of recovery mode menu entries
#GRUB_DISABLE_RECOVERY="true"

# Uncomment to get a beep at grub start
#GRUB_INIT_TUNE="480 440 1"




=================== sda1recordfail=1/grub/grubenv :
recordfail=1




=================== UEFI/Legacy mode:
This live-session is not in EFI-mode.
SecureBoot maybe enabled.


=================== PARTITIONS & DISKS:
sda1	: sda,	not-sepboot,	grubenv-ng	grub2,	grub-pc ,	update-grub,	64,	with-boot,	is-os,	not--efi--part,	fstab-without-boot,	fstab-without-efi,	no-nt,	no-winload,	no-recov-nor-hid,	no-bmgr,	notwinboot,	apt-get,	grub-install,	with--usr,	fstab-without-usr,	not-sep-usr,	standard,	farbios,	notbiosboot, /mnt/boot-sav/sda1.

sda	: not-GPT,	BIOSboot-not-needed,	has-no-EFIpart, 	not-usb,	not-mmc, has-os,	2048 sectors * 512 bytes


=================== parted -lm:

BYT;
/dev/sda:2000GB:scsi:512:4096:msdos:ATA ST2000DM001-9YN1:;
1:1049kB:2000GB:2000GB:ext4::boot;

BYT;
/dev/sdb:4037MB:scsi:512:512:msdos:Generic Flash Disk:;
1:1049kB:4037MB:4036MB:fat32::boot, lba;

=================== lsblk:
KNAME TYPE FSTYPE     SIZE LABEL
loop0 loop squashfs   1,9G
loop1 loop squashfs  88,5M
loop2 loop squashfs  54,4M
loop3 loop squashfs  42,8M
loop4 loop squashfs 149,9M
loop5 loop squashfs     4M
loop6 loop squashfs  14,8M
loop7 loop squashfs  1008K
loop8 loop squashfs   3,7M
sda   disk            1,8T
sda1  part ext4       1,8T
sdb   disk            3,8G
sdb1  part vfat       3,8G UBUNTU 18_0
sr0   rom            1024M

KNAME ROTA RO RM STATE   MOUNTPOINT
loop0    1  1  0         /rofs
loop1    1  1  0         /snap/core/7270
loop2    1  1  0         /snap/core18/1066
loop3    1  1  0         /snap/gtk-common-themes/1313
loop4    1  1  0         /snap/gnome-3-28-1804/67
loop5    1  1  0         /snap/gnome-calculator/406
loop6    1  1  0         /snap/gnome-characters/296
loop7    1  1  0         /snap/gnome-logs/61
loop8    1  1  0         /snap/gnome-system-monitor/100
sda      1  0  0 running
sda1     1  0  0         /mnt/boot-sav/sda1
sdb      1  0  1 running
sdb1     1  0  1         /cdrom
sr0      1  0  1 running


=================== mount:
sysfs on /sys type sysfs (rw,nosuid,nodev,noexec,relatime)
proc on /proc type proc (rw,nosuid,nodev,noexec,relatime)
udev on /dev type devtmpfs (rw,nosuid,relatime,size=3017188k,nr_inodes=754297,mode=755)
devpts on /dev/pts type devpts (rw,nosuid,noexec,relatime,gid=5,mode=620,ptmxmode=000)
tmpfs on /run type tmpfs (rw,nosuid,noexec,relatime,size=608388k,mode=755)
/dev/sdb1 on /cdrom type vfat (ro,noatime,fmask=0022,dmask=0022,codepage=437,iocharset=iso8859-1,shortname=mixed,errors=remount-ro)
/dev/loop0 on /rofs type squashfs (ro,noatime)
/cow on / type overlay (rw,relatime,lowerdir=//filesystem.squashfs,upperdir=/cow/upper,workdir=/cow/work)
securityfs on /sys/kernel/security type securityfs (rw,nosuid,nodev,noexec,relatime)
tmpfs on /dev/shm type tmpfs (rw,nosuid,nodev)
tmpfs on /run/lock type tmpfs (rw,nosuid,nodev,noexec,relatime,size=5120k)
tmpfs on /sys/fs/cgroup type tmpfs (ro,nosuid,nodev,noexec,mode=755)
cgroup on /sys/fs/cgroup/unified type cgroup2 (rw,nosuid,nodev,noexec,relatime,nsdelegate)
cgroup on /sys/fs/cgroup/systemd type cgroup (rw,nosuid,nodev,noexec,relatime,xattr,name=systemd)
pstore on /sys/fs/pstore type pstore (rw,nosuid,nodev,noexec,relatime)
cgroup on /sys/fs/cgroup/cpu,cpuacct type cgroup (rw,nosuid,nodev,noexec,relatime,cpu,cpuacct)
cgroup on /sys/fs/cgroup/net_cls,net_prio type cgroup (rw,nosuid,nodev,noexec,relatime,net_cls,net_prio)
cgroup on /sys/fs/cgroup/rdma type cgroup (rw,nosuid,nodev,noexec,relatime,rdma)
cgroup on /sys/fs/cgroup/blkio type cgroup (rw,nosuid,nodev,noexec,relatime,blkio)
cgroup on /sys/fs/cgroup/pids type cgroup (rw,nosuid,nodev,noexec,relatime,pids)
cgroup on /sys/fs/cgroup/perf_event type cgroup (rw,nosuid,nodev,noexec,relatime,perf_event)
cgroup on /sys/fs/cgroup/devices type cgroup (rw,nosuid,nodev,noexec,relatime,devices)
cgroup on /sys/fs/cgroup/cpuset type cgroup (rw,nosuid,nodev,noexec,relatime,cpuset)
cgroup on /sys/fs/cgroup/memory type cgroup (rw,nosuid,nodev,noexec,relatime,memory)
cgroup on /sys/fs/cgroup/freezer type cgroup (rw,nosuid,nodev,noexec,relatime,freezer)
cgroup on /sys/fs/cgroup/hugetlb type cgroup (rw,nosuid,nodev,noexec,relatime,hugetlb)
systemd-1 on /proc/sys/fs/binfmt_misc type autofs (rw,relatime,fd=25,pgrp=1,timeout=0,minproto=5,maxproto=5,direct,pipe_ino=15062)
mqueue on /dev/mqueue type mqueue (rw,relatime)
debugfs on /sys/kernel/debug type debugfs (rw,relatime)
hugetlbfs on /dev/hugepages type hugetlbfs (rw,relatime,pagesize=2M)
tracefs on /sys/kernel/debug/tracing type tracefs (rw,relatime)
fusectl on /sys/fs/fuse/connections type fusectl (rw,relatime)
configfs on /sys/kernel/config type configfs (rw,relatime)
tmpfs on /tmp type tmpfs (rw,nosuid,nodev,relatime)
tmpfs on /run/user/999 type tmpfs (rw,nosuid,nodev,relatime,size=608384k,mode=700,uid=999,gid=999)
gvfsd-fuse on /run/user/999/gvfs type fuse.gvfsd-fuse (rw,nosuid,nodev,relatime,user_id=999,group_id=999)
/var/lib/snapd/snaps/core_7270.snap on /snap/core/7270 type squashfs (ro,nodev,relatime,x-gdu.hide)
/var/lib/snapd/snaps/core18_1066.snap on /snap/core18/1066 type squashfs (ro,nodev,relatime,x-gdu.hide)
/var/lib/snapd/snaps/gtk-common-themes_1313.snap on /snap/gtk-common-themes/1313 type squashfs (ro,nodev,relatime,x-gdu.hide)
/var/lib/snapd/snaps/gnome-3-28-1804_67.snap on /snap/gnome-3-28-1804/67 type squashfs (ro,nodev,relatime,x-gdu.hide)
/var/lib/snapd/snaps/gnome-calculator_406.snap on /snap/gnome-calculator/406 type squashfs (ro,nodev,relatime,x-gdu.hide)
/var/lib/snapd/snaps/gnome-characters_296.snap on /snap/gnome-characters/296 type squashfs (ro,nodev,relatime,x-gdu.hide)
/var/lib/snapd/snaps/gnome-logs_61.snap on /snap/gnome-logs/61 type squashfs (ro,nodev,relatime,x-gdu.hide)
/var/lib/snapd/snaps/gnome-system-monitor_100.snap on /snap/gnome-system-monitor/100 type squashfs (ro,nodev,relatime,x-gdu.hide)
/dev/sda1 on /mnt/boot-sav/sda1 type ext4 (rw,relatime)


=================== ls:
/sys/block/sda (filtered):  alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range hidden holders inflight integrity mq power queue range removable ro sda1 size slaves stat subsystem trace uevent
/sys/block/sdb (filtered):  alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range hidden holders inflight integrity mq power queue range removable ro sdb1 size slaves stat subsystem trace uevent
/sys/block/sr0 (filtered):  alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range hidden holders inflight integrity mq power queue range removable ro size slaves stat subsystem trace uevent
/dev (filtered):  autofs block bsg btrfs-control bus cdrom cdrw char console core cpu cpu_dma_latency cuse disk dri dvd dvdrw ecryptfs fb0 fd full fuse gpiochip0 hidraw0 hidraw1 hidraw2 hidraw3 hpet hugepages hwrng i2c-0 i2c-1 i2c-2 i2c-3 i2c-4 i2c-5 i2c-6 i2c-7 initctl input kmsg kvm lightnvm log mapper mcelog mei0 mem memory_bandwidth mqueue net network_latency network_throughput null port ppp psaux ptmx pts random rfkill rtc rtc0 sda sda1 sdb sdb1 sg0 sg1 sg2 shm snapshot snd sr0 stderr stdin stdout udmabuf uhid uinput urandom userio vfio vga_arbiter vhci vhost-net vhost-vsock zero
ls /dev/mapper:  control

=================== df -Th:

Filesystem     Type      Size  Used Avail Use% Mounted on
udev           devtmpfs  2.9G     0  2.9G   0% /dev
tmpfs          tmpfs     595M  1.6M  593M   1% /run
/dev/sdb1      vfat      3.8G  2.0G  1.9G  52% /cdrom
/dev/loop0     squashfs  1.9G  1.9G     0 100% /rofs
/cow           overlay   3.0G  498M  2.5G  17% /
tmpfs          tmpfs     3.0G   77M  2.9G   3% /dev/shm
tmpfs          tmpfs     5.0M  8.0K  5.0M   1% /run/lock
tmpfs          tmpfs     3.0G     0  3.0G   0% /sys/fs/cgroup
tmpfs          tmpfs     3.0G  4.0K  3.0G   1% /tmp
tmpfs          tmpfs     595M   56K  595M   1% /run/user/999
/dev/loop1     squashfs   89M   89M     0 100% /snap/core/7270
/dev/loop2     squashfs   55M   55M     0 100% /snap/core18/1066
/dev/loop3     squashfs   43M   43M     0 100% /snap/gtk-common-themes/1313
/dev/loop4     squashfs  150M  150M     0 100% /snap/gnome-3-28-1804/67
/dev/loop5     squashfs  4.2M  4.2M     0 100% /snap/gnome-calculator/406
/dev/loop6     squashfs   15M   15M     0 100% /snap/gnome-characters/296
/dev/loop7     squashfs  1.0M  1.0M     0 100% /snap/gnome-logs/61
/dev/loop8     squashfs  3.8M  3.8M     0 100% /snap/gnome-system-monitor/100
/dev/sda1      ext4      1.8T   13G  1.7T   1% /mnt/boot-sav/sda1

=================== fdisk -l:
Disk /dev/loop0: 1.9 GiB, 1987817472 bytes, 3882456 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes


Disk /dev/loop1: 88.5 MiB, 92778496 bytes, 181208 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes


Disk /dev/loop2: 54.4 MiB, 57069568 bytes, 111464 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes


Disk /dev/loop3: 42.8 MiB, 44879872 bytes, 87656 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes


Disk /dev/loop4: 149.9 MiB, 157184000 bytes, 307000 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes


Disk /dev/loop5: 4 MiB, 4218880 bytes, 8240 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes


Disk /dev/loop6: 14.8 MiB, 15462400 bytes, 30200 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes


Disk /dev/loop7: 1008 KiB, 1032192 bytes, 2016 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes


Disk /dev/sda: 1.8 TiB, 2000398934016 bytes, 3907029168 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disklabel type: dos
Disk identifier: 0x630ee82c

Device     Boot Start        End    Sectors  Size Id Type
/dev/sda1  *     2048 3907028991 3907026944  1.8T 83 Linux




Disk /dev/sdb: 3.8 GiB, 4037017600 bytes, 7884800 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: dos
Disk identifier: 0x0121ef53

Device     Boot Start     End Sectors  Size Id Type
/dev/sdb1  *     2048 7884799 7882752  3.8G  c W95 FAT32 (LBA)


Disk /dev/loop8: 3.7 MiB, 3825664 bytes, 7472 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes




=================== Suggested repair
The default repair of the Boot-Repair utility would reinstall the grub2 of sda1 into the MBR of sda.
Additional repair would be performed: unhide-bootmenu-10s


=================== Final advice in case of suggested repair


Les fichiers de démarrage de [Ubuntu 18.04.3 LTS] sont loin du début du disque. Votre BIOS pourrait ne pas les détecter. Vous voudrez peut-être re-essayer après avoir créé une partition /boot (EXT4, >200MB, en début de disque). Cela peut être réalisé via des outils tels que gParted. Puis sélectionnez cette partition via l'option [Partition /boot séparée :] de [Boot-Repair]. (http://doc.ubuntu-fr.org/tutoriel/partition_boot)


=================== User settings
The settings chosen by the user will not act on the boot.

Je te suggère de tenter le démarrage sur le noyau précédent 5.0.0-35 au lieu du noyau 5.0.0-36 sélectionné par défaut. Pour cela, il faut forcer l'affichage du menu Grub au démarrage - ça peut se faire en pressant la touche SHIFT (la touche des majuscules) au démarrage de l'ordi - et sélectionner "Options avancées pour Ubuntu". Cela va entrainer l'apparition d'un sous-menu dans lequel tu sélectionneras la ligne "Ubuntu, avec Linux 5.0.0-35-generic" et tu valideras ce choix par la touche Entrée

Dernière modification par malbo (Le 28/11/2019, à 08:21)

Hors ligne

#5 Le 29/11/2019, à 17:51

le moustachu

Re : probleme busybox

Ubuntu démarre mais le mot de passe n'a marche pas. Je retourne sur l'enfant de verrouillage.

Hors ligne

#6 Le 29/11/2019, à 18:06

deleveau

Re : probleme busybox

bonjour
peut être problème clavier qwerty/azerty?

Hors ligne

#7 Le 02/12/2019, à 19:36

le moustachu

Re : probleme busybox

non. car avec un faux mdp, il me dit que le mot de passe est incorrect.

Hors ligne