Ubuntu-fr

Xaxou

[Résolu] AMD Radeon sur Lenovo Ideapad 330 (application : Blender)

Bonjour,

J'ai un portable Lenovo Ideapad 330, dans une série comportant une carte graphique "Radeon" (attesté par l'étiquette "Radeon Graphics" à côté de mon TouchPad). Pour le descriptif, cf. au besoin le lien ci-avant : il s'agit d'une carte AMD Radeon 530.

Comme je voulais configurer Blender, je me suis rendu compte que je ne pouvais pas paramétrer correctement le rendu par GPU. En poussant l'investigation, j'ai repéré que, dans les paramètres de Ubuntu 18.04 LTS, onglet "A propos", ma carte graphique apparaissait comme "Intel® UHD Graphics 620 (Kabylake GT2)".

Du coup, je me pose deux questions :
1/ A quel moment la carte graphique a-t-elle été identifiée comme telle (je suppose à l'installation de Ubuntu ?), et pourquoi cette mauvaise identification ?
2/ Y a-t-il quelque chose que je puisse faire pour que la carte soit bien identifiée, et ai-je ensuite besoin d'installer des drivers ?

Merci par avance pour vos retours !
Xavier

Pas de fichier /etc/X11/xorg.conf

Fichier /var/log/Xorg.0.log :

[   126.719] (--) Log file renamed from "/var/log/Xorg.pid-2497.log" to "/var/log/Xorg.0.log"
[   126.721] 
X.Org X Server 1.19.6
Release Date: 2017-12-20
[   126.721] X Protocol Version 11, Revision 0
[   126.721] Build Operating System: Linux 4.4.0-138-generic x86_64 Ubuntu
[   126.721] Current Operating System: Linux elrond 4.19.5-041905-generic #201811271131 SMP Tue Nov 27 16:33:46 UTC 2018 x86_64
[   126.721] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.19.5-041905-generic root=UUID=1f0a9507-f872-4e22-ba9e-1547174c872f ro recovery nomodeset
[   126.721] Build Date: 25 October 2018  04:11:27PM
[   126.721] xorg-server 2:1.19.6-1ubuntu4.2 (For technical support please see http://www.ubuntu.com/support) 
[   126.721] Current version of pixman: 0.34.0
[   126.721] 	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
[   126.721] Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[   126.721] (==) Log file: "/var/log/Xorg.0.log", Time: Mon May  6 21:49:41 2019
[   126.722] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[   126.723] (==) No Layout section.  Using the first Screen section.
[   126.723] (==) No screen section available. Using defaults.
[   126.723] (**) |-->Screen "Default Screen Section" (0)
[   126.723] (**) |   |-->Monitor "<default monitor>"
[   126.724] (==) No monitor specified for screen "Default Screen Section".
	Using a default monitor configuration.
[   126.724] (==) Automatically adding devices
[   126.724] (==) Automatically enabling devices
[   126.724] (==) Automatically adding GPU devices
[   126.724] (==) Automatically binding GPU devices
[   126.725] (==) Max clients allowed: 256, resource mask: 0x1fffff
[   126.727] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[   126.727] 	Entry deleted from font path.
[   126.727] (WW) The directory "/usr/share/fonts/X11/100dpi/" does not exist.
[   126.727] 	Entry deleted from font path.
[   126.727] (WW) The directory "/usr/share/fonts/X11/75dpi/" does not exist.
[   126.727] 	Entry deleted from font path.
[   126.727] (WW) The directory "/usr/share/fonts/X11/100dpi" does not exist.
[   126.727] 	Entry deleted from font path.
[   126.727] (WW) The directory "/usr/share/fonts/X11/75dpi" does not exist.
[   126.727] 	Entry deleted from font path.
[   126.727] (==) FontPath set to:
	/usr/share/fonts/X11/misc,
	/usr/share/fonts/X11/Type1,
	built-ins
[   126.727] (==) ModulePath set to "/usr/lib/xorg/modules"
[   126.727] (II) The server relies on udev to provide the list of input devices.
	If no devices become available, reconfigure udev or disable AutoAddDevices.
[   126.727] (II) Loader magic: 0x556b99e2d020
[   126.727] (II) Module ABI versions:
[   126.727] 	X.Org ANSI C Emulation: 0.4
[   126.727] 	X.Org Video Driver: 23.0
[   126.727] 	X.Org XInput driver : 24.1
[   126.727] 	X.Org Server Extension : 10.0
[   126.728] (++) using VT number 1

[   126.729] (II) systemd-logind: took control of session /org/freedesktop/login1/session/_31
[   126.731] (--) PCI:*(0:0:2:0) 8086:5917:17aa:3964 rev 7, Mem @ 0xb1000000/16777216, 0xc0000000/268435456, I/O @ 0x00005000/64, BIOS @ 0x????????/131072
[   126.731] (--) PCI: (0:1:0:0) 1002:6900:17aa:3964 rev 195, Mem @ 0xa0000000/268435456, 0xb0000000/2097152, 0xb2300000/262144, I/O @ 0x00004000/256, BIOS @ 0x????????/131072
[   126.731] (II) LoadModule: "glx"
[   126.731] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[   126.740] (II) Module glx: vendor="X.Org Foundation"
[   126.740] 	compiled for 1.19.6, module version = 1.0.0
[   126.740] 	ABI class: X.Org Server Extension, version 10.0
[   126.740] (==) Matched modesetting as autoconfigured driver 0
[   126.740] (==) Matched fbdev as autoconfigured driver 1
[   126.740] (==) Matched vesa as autoconfigured driver 2
[   126.740] (==) Assigned the driver to the xf86ConfigLayout
[   126.740] (II) LoadModule: "modesetting"
[   126.741] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[   126.742] (II) Module modesetting: vendor="X.Org Foundation"
[   126.742] 	compiled for 1.19.6, module version = 1.19.6
[   126.742] 	Module class: X.Org Video Driver
[   126.742] 	ABI class: X.Org Video Driver, version 23.0
[   126.742] (II) LoadModule: "fbdev"
[   126.742] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[   126.743] (II) Module fbdev: vendor="X.Org Foundation"
[   126.743] 	compiled for 1.19.3, module version = 0.4.4
[   126.743] 	Module class: X.Org Video Driver
[   126.743] 	ABI class: X.Org Video Driver, version 23.0
[   126.743] (II) LoadModule: "vesa"
[   126.743] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[   126.743] (II) Module vesa: vendor="X.Org Foundation"
[   126.743] 	compiled for 1.19.3, module version = 2.3.4
[   126.743] 	Module class: X.Org Video Driver
[   126.743] 	ABI class: X.Org Video Driver, version 23.0
[   126.743] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[   126.743] (II) FBDEV: driver for framebuffer: fbdev
[   126.743] (II) VESA: driver for VESA chipsets: vesa
[   126.743] (EE) open /dev/dri/card0: No such file or directory
[   126.743] (WW) Falling back to old probe method for modesetting
[   126.743] (EE) open /dev/dri/card0: No such file or directory
[   126.743] (II) Loading sub module "fbdevhw"
[   126.743] (II) LoadModule: "fbdevhw"
[   126.743] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[   126.744] (II) Module fbdevhw: vendor="X.Org Foundation"
[   126.744] 	compiled for 1.19.6, module version = 0.0.2
[   126.744] 	ABI class: X.Org Video Driver, version 23.0
[   126.744] (**) FBDEV(1): claimed PCI slot 0@0:2:0
[   126.744] (II) FBDEV(1): using default device
[   126.744] (WW) Falling back to old probe method for vesa
[   126.744] (EE) Screen 0 deleted because of no matching config section.
[   126.744] (II) UnloadModule: "modesetting"
[   126.744] (II) FBDEV(0): Creating default Display subsection in Screen section
	"Default Screen Section" for depth/fbbpp 24/32
[   126.744] (==) FBDEV(0): Depth 24, (==) framebuffer bpp 32
[   126.744] (==) FBDEV(0): RGB weight 888
[   126.744] (==) FBDEV(0): Default visual is TrueColor
[   126.744] (==) FBDEV(0): Using gamma correction (1.0, 1.0, 1.0)
[   126.744] (II) FBDEV(0): hardware: EFI VGA (video memory: 5632kB)
[   126.744] (II) FBDEV(0): checking modes against framebuffer device...
[   126.744] (II) FBDEV(0): checking modes against monitor...
[   126.744] (--) FBDEV(0): Virtual size is 1600x900 (pitch 1600)
[   126.744] (**) FBDEV(0):  Built-in mode "current": 144.0 MHz, 70.9 kHz, 76.7 Hz
[   126.744] (II) FBDEV(0): Modeline "current"x0.0  144.01  1600 1632 1832 2032  900 904 908 924 -hsync -vsync -csync (70.9 kHz b)
[   126.744] (==) FBDEV(0): DPI set to (96, 96)
[   126.744] (II) Loading sub module "fb"
[   126.744] (II) LoadModule: "fb"
[   126.744] (II) Loading /usr/lib/xorg/modules/libfb.so
[   126.745] (II) Module fb: vendor="X.Org Foundation"
[   126.745] 	compiled for 1.19.6, module version = 1.0.0
[   126.745] 	ABI class: X.Org ANSI C Emulation, version 0.4
[   126.745] (**) FBDEV(0): using shadow framebuffer
[   126.745] (II) Loading sub module "shadow"
[   126.745] (II) LoadModule: "shadow"
[   126.745] (II) Loading /usr/lib/xorg/modules/libshadow.so
[   126.746] (II) Module shadow: vendor="X.Org Foundation"
[   126.746] 	compiled for 1.19.6, module version = 1.1.0
[   126.746] 	ABI class: X.Org ANSI C Emulation, version 0.4
[   126.746] (II) UnloadModule: "vesa"
[   126.746] (II) Unloading vesa
[   126.746] (==) Depth 24 pixmap format is 32 bpp
[   126.746] (II) FBDEV(0): FBIOBLANK: Invalid argument (Screen blanking not supported by kernel - disabling)
[   126.748] (==) FBDEV(0): Backing store enabled
[   126.749] (==) FBDEV(0): DPMS enabled
[   126.749] (==) RandR enabled
[   126.752] (II) SELinux: Disabled on system
[   126.752] (II) AIGLX: Screen 0 is not DRI2 capable
[   126.752] (EE) AIGLX: reverting to software rendering
[   126.899] (II) IGLX: enabled GLX_MESA_copy_sub_buffer
[   126.899] (II) IGLX: Loaded and initialized swrast
[   126.899] (II) GLX: Initialized DRISWRAST GL provider for screen 0
[   126.938] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[   126.938] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[   126.938] (II) LoadModule: "libinput"
[   126.938] (II) Loading /usr/lib/xorg/modules/input/libinput_drv.so
[   126.972] (II) Module libinput: vendor="X.Org Foundation"
[   126.972] 	compiled for 1.19.6, module version = 0.27.1
[   126.972] 	Module class: X.Org XInput Driver
[   126.972] 	ABI class: X.Org XInput driver, version 24.1
[   126.972] (II) Using input driver 'libinput' for 'Power Button'
[   126.973] (II) systemd-logind: got fd for /dev/input/event1 13:65 fd 22 paused 0
[   126.973] (**) Power Button: always reports core events
[   126.973] (**) Option "Device" "/dev/input/event1"
[   126.973] (**) Option "_source" "server/udev"
[   126.973] (II) event1  - Power Button: is tagged by udev as: Keyboard
[   126.973] (II) event1  - Power Button: device is a keyboard
[   126.973] (II) event1  - Power Button: device removed
[   126.973] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1/event1"
[   126.973] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[   126.973] (**) Option "xkb_layout" "fr"
[   126.974] (**) Option "xkb_variant" "oss"
[   126.986] (II) event1  - Power Button: is tagged by udev as: Keyboard
[   126.986] (II) event1  - Power Button: device is a keyboard
[   126.986] (II) config/udev: Adding input device Lid Switch (/dev/input/event0)
[   126.986] (II) No input driver specified, ignoring this device.
[   126.986] (II) This device may have been added with another device file.
[   126.987] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/event3)
[   126.987] (**) Logitech USB Receiver: Applying InputClass "libinput keyboard catchall"
[   126.987] (II) Using input driver 'libinput' for 'Logitech USB Receiver'
[   126.987] (II) systemd-logind: got fd for /dev/input/event3 13:67 fd 25 paused 0
[   126.987] (**) Logitech USB Receiver: always reports core events
[   126.987] (**) Option "Device" "/dev/input/event3"
[   126.987] (**) Option "_source" "server/udev"
[   126.988] (II) event3  - Logitech USB Receiver: is tagged by udev as: Keyboard
[   126.988] (II) event3  - Logitech USB Receiver: device is a keyboard
[   126.988] (II) event3  - Logitech USB Receiver: device removed
[   126.988] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3:1.0/0003:046D:C534.0001/input/input3/event3"
[   126.988] (II) XINPUT: Adding extended input device "Logitech USB Receiver" (type: KEYBOARD, id 7)
[   126.988] (**) Option "xkb_layout" "fr"
[   126.988] (**) Option "xkb_variant" "oss"
[   126.988] (II) event3  - Logitech USB Receiver: is tagged by udev as: Keyboard
[   126.988] (II) event3  - Logitech USB Receiver: device is a keyboard
[   126.989] (II) config/udev: Adding input device Logitech USB Receiver Mouse (/dev/input/event4)
[   126.989] (**) Logitech USB Receiver Mouse: Applying InputClass "libinput pointer catchall"
[   126.989] (II) Using input driver 'libinput' for 'Logitech USB Receiver Mouse'
[   126.989] (II) systemd-logind: got fd for /dev/input/event4 13:68 fd 26 paused 0
[   126.989] (**) Logitech USB Receiver Mouse: always reports core events
[   126.989] (**) Option "Device" "/dev/input/event4"
[   126.989] (**) Option "_source" "server/udev"
[   126.990] (II) event4  - Logitech USB Receiver Mouse: is tagged by udev as: Mouse
[   126.990] (II) event4  - Logitech USB Receiver Mouse: device is a pointer
[   126.990] (II) event4  - Logitech USB Receiver Mouse: device removed
[   126.990] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3:1.1/0003:046D:C534.0002/input/input4/event4"
[   126.990] (II) XINPUT: Adding extended input device "Logitech USB Receiver Mouse" (type: MOUSE, id 8)
[   126.990] (**) Option "AccelerationScheme" "none"
[   126.990] (**) Logitech USB Receiver Mouse: (accel) selected scheme none/0
[   126.990] (**) Logitech USB Receiver Mouse: (accel) acceleration factor: 2.000
[   126.990] (**) Logitech USB Receiver Mouse: (accel) acceleration threshold: 4
[   126.990] (II) event4  - Logitech USB Receiver Mouse: is tagged by udev as: Mouse
[   126.990] (II) event4  - Logitech USB Receiver Mouse: device is a pointer
[   126.991] (II) config/udev: Adding input device Logitech USB Receiver Mouse (/dev/input/mouse0)
[   126.991] (II) No input driver specified, ignoring this device.
[   126.991] (II) This device may have been added with another device file.
[   126.991] (II) config/udev: Adding input device Logitech USB Receiver Consumer Control (/dev/input/event5)
[   126.991] (**) Logitech USB Receiver Consumer Control: Applying InputClass "libinput keyboard catchall"
[   126.991] (II) Using input driver 'libinput' for 'Logitech USB Receiver Consumer Control'
[   126.992] (II) systemd-logind: got fd for /dev/input/event5 13:69 fd 27 paused 0
[   126.992] (**) Logitech USB Receiver Consumer Control: always reports core events
[   126.992] (**) Option "Device" "/dev/input/event5"
[   126.992] (**) Option "_source" "server/udev"
[   126.992] (II) event5  - Logitech USB Receiver Consumer Control: is tagged by udev as: Keyboard
[   126.992] (II) event5  - Logitech USB Receiver Consumer Control: device is a keyboard
[   126.992] (II) event5  - Logitech USB Receiver Consumer Control: device removed
[   126.992] (II) libinput: Logitech USB Receiver Consumer Control: needs a virtual subdevice
[   126.992] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3:1.1/0003:046D:C534.0002/input/input5/event5"
[   126.992] (II) XINPUT: Adding extended input device "Logitech USB Receiver Consumer Control" (type: MOUSE, id 9)
[   126.992] (**) Option "AccelerationScheme" "none"
[   126.992] (**) Logitech USB Receiver Consumer Control: (accel) selected scheme none/0
[   126.992] (**) Logitech USB Receiver Consumer Control: (accel) acceleration factor: 2.000
[   126.992] (**) Logitech USB Receiver Consumer Control: (accel) acceleration threshold: 4
[   126.992] (II) event5  - Logitech USB Receiver Consumer Control: is tagged by udev as: Keyboard
[   126.993] (II) event5  - Logitech USB Receiver Consumer Control: device is a keyboard
[   126.993] (II) config/udev: Adding input device Logitech USB Receiver System Control (/dev/input/event6)
[   126.993] (**) Logitech USB Receiver System Control: Applying InputClass "libinput keyboard catchall"
[   126.993] (II) Using input driver 'libinput' for 'Logitech USB Receiver System Control'
[   126.993] (II) systemd-logind: got fd for /dev/input/event6 13:70 fd 28 paused 0
[   126.993] (**) Logitech USB Receiver System Control: always reports core events
[   126.993] (**) Option "Device" "/dev/input/event6"
[   126.993] (**) Option "_source" "server/udev"
[   126.994] (II) event6  - Logitech USB Receiver System Control: is tagged by udev as: Keyboard
[   126.994] (II) event6  - Logitech USB Receiver System Control: device is a keyboard
[   126.994] (II) event6  - Logitech USB Receiver System Control: device removed
[   126.994] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3:1.1/0003:046D:C534.0002/input/input6/event6"
[   126.994] (II) XINPUT: Adding extended input device "Logitech USB Receiver System Control" (type: KEYBOARD, id 10)
[   126.994] (**) Option "xkb_layout" "fr"
[   126.994] (**) Option "xkb_variant" "oss"
[   126.994] (II) event6  - Logitech USB Receiver System Control: is tagged by udev as: Keyboard
[   126.994] (II) event6  - Logitech USB Receiver System Control: device is a keyboard
[   126.995] (II) config/udev: Adding input device EasyCamera: EasyCamera (/dev/input/event7)
[   126.995] (**) EasyCamera: EasyCamera: Applying InputClass "libinput keyboard catchall"
[   126.995] (II) Using input driver 'libinput' for 'EasyCamera: EasyCamera'
[   126.995] (II) systemd-logind: got fd for /dev/input/event7 13:71 fd 29 paused 0
[   126.995] (**) EasyCamera: EasyCamera: always reports core events
[   126.995] (**) Option "Device" "/dev/input/event7"
[   126.995] (**) Option "_source" "server/udev"
[   126.996] (II) event7  - EasyCamera: EasyCamera: is tagged by udev as: Keyboard
[   126.996] (II) event7  - EasyCamera: EasyCamera: device is a keyboard
[   126.996] (II) event7  - EasyCamera: EasyCamera: device removed
[   126.996] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-8/1-8:1.0/input/input9/event7"
[   126.996] (II) XINPUT: Adding extended input device "EasyCamera: EasyCamera" (type: KEYBOARD, id 11)
[   126.996] (**) Option "xkb_layout" "fr"
[   126.996] (**) Option "xkb_variant" "oss"
[   126.996] (II) event7  - EasyCamera: EasyCamera: is tagged by udev as: Keyboard
[   126.996] (II) event7  - EasyCamera: EasyCamera: device is a keyboard
[   126.997] (II) config/udev: Adding input device Elan Touchpad (/dev/input/event8)
[   126.997] (**) Elan Touchpad: Applying InputClass "libinput touchpad catchall"
[   126.997] (II) Using input driver 'libinput' for 'Elan Touchpad'
[   126.997] (II) systemd-logind: got fd for /dev/input/event8 13:72 fd 30 paused 0
[   126.997] (**) Elan Touchpad: always reports core events
[   126.997] (**) Option "Device" "/dev/input/event8"
[   126.997] (**) Option "_source" "server/udev"
[   126.998] (II) event8  - Elan Touchpad: is tagged by udev as: Touchpad
[   126.998] (II) event8  - Elan Touchpad: device is a touchpad
[   126.998] (II) event8  - Elan Touchpad: device removed
[   126.998] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:15.0/i2c_designware.0/i2c-0/i2c-ELAN061D:00/input/input10/event8"
[   126.998] (II) XINPUT: Adding extended input device "Elan Touchpad" (type: TOUCHPAD, id 12)
[   126.998] (**) Option "AccelerationScheme" "none"
[   126.998] (**) Elan Touchpad: (accel) selected scheme none/0
[   126.998] (**) Elan Touchpad: (accel) acceleration factor: 2.000
[   126.998] (**) Elan Touchpad: (accel) acceleration threshold: 4
[   126.998] (II) event8  - Elan Touchpad: is tagged by udev as: Touchpad
[   126.998] (II) event8  - Elan Touchpad: device is a touchpad
[   126.999] (II) config/udev: Adding input device Elan Touchpad (/dev/input/mouse1)
[   126.999] (II) No input driver specified, ignoring this device.
[   126.999] (II) This device may have been added with another device file.
[   126.999] (II) config/udev: Adding input device HDA Intel PCH Mic (/dev/input/event9)
[   126.999] (II) No input driver specified, ignoring this device.
[   126.999] (II) This device may have been added with another device file.
[   127.000] (II) config/udev: Adding input device HDA Intel PCH Headphone (/dev/input/event10)
[   127.000] (II) No input driver specified, ignoring this device.
[   127.000] (II) This device may have been added with another device file.
[   127.000] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event2)
[   127.000] (**) AT Translated Set 2 keyboard: Applying InputClass "libinput keyboard catchall"
[   127.000] (II) Using input driver 'libinput' for 'AT Translated Set 2 keyboard'
[   127.000] (II) systemd-logind: got fd for /dev/input/event2 13:66 fd 31 paused 0
[   127.000] (**) AT Translated Set 2 keyboard: always reports core events
[   127.000] (**) Option "Device" "/dev/input/event2"
[   127.000] (**) Option "_source" "server/udev"
[   127.001] (II) event2  - AT Translated Set 2 keyboard: is tagged by udev as: Keyboard
[   127.001] (II) event2  - AT Translated Set 2 keyboard: device is a keyboard
[   127.001] (II) event2  - AT Translated Set 2 keyboard: device removed
[   127.001] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input2/event2"
[   127.001] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 13)
[   127.001] (**) Option "xkb_layout" "fr"
[   127.001] (**) Option "xkb_variant" "oss"
[   127.001] (II) event2  - AT Translated Set 2 keyboard: is tagged by udev as: Keyboard
[   127.001] (II) event2  - AT Translated Set 2 keyboard: device is a keyboard
[   127.006] (**) Logitech USB Receiver Consumer Control: Applying InputClass "libinput keyboard catchall"
[   127.006] (II) Using input driver 'libinput' for 'Logitech USB Receiver Consumer Control'
[   127.006] (II) systemd-logind: returning pre-existing fd for /dev/input/event5 13:69
[   127.006] (**) Logitech USB Receiver Consumer Control: always reports core events
[   127.006] (**) Option "Device" "/dev/input/event5"
[   127.006] (**) Option "_source" "_driver/libinput"
[   127.006] (II) libinput: Logitech USB Receiver Consumer Control: is a virtual subdevice
[   127.006] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3:1.1/0003:046D:C534.0002/input/input5/event5"
[   127.006] (II) XINPUT: Adding extended input device "Logitech USB Receiver Consumer Control" (type: KEYBOARD, id 14)
[   127.006] (**) Option "xkb_layout" "fr"
[   127.006] (**) Option "xkb_variant" "oss"
[   251.817] (**) Option "fd" "22"
[   251.817] (II) event1  - Power Button: device removed
[   251.817] (**) Option "fd" "25"
[   251.817] (II) event3  - Logitech USB Receiver: device removed
[   251.817] (**) Option "fd" "26"
[   251.817] (II) event4  - Logitech USB Receiver Mouse: device removed
[   251.817] (**) Option "fd" "27"
[   251.817] (**) Option "fd" "28"
[   251.817] (II) event6  - Logitech USB Receiver System Control: device removed
[   251.817] (**) Option "fd" "29"
[   251.817] (II) event7  - EasyCamera: EasyCamera: device removed
[   251.818] (**) Option "fd" "30"
[   251.818] (II) event8  - Elan Touchpad: device removed
[   251.818] (**) Option "fd" "31"
[   251.818] (II) event2  - AT Translated Set 2 keyboard: device removed
[   251.818] (**) Option "fd" "27"
[   251.818] (II) event5  - Logitech USB Receiver Consumer Control: device removed
[   251.827] (II) UnloadModule: "libinput"
[   251.827] (II) systemd-logind: not releasing fd for 13:69, still in use
[   251.827] (II) UnloadModule: "libinput"
[   251.827] (II) systemd-logind: releasing fd for 13:66
[   251.983] (II) UnloadModule: "libinput"
[   251.984] (II) systemd-logind: releasing fd for 13:72
[   252.013] (II) UnloadModule: "libinput"
[   252.014] (II) systemd-logind: releasing fd for 13:71
[   252.042] (II) UnloadModule: "libinput"
[   252.042] (II) systemd-logind: releasing fd for 13:70
[   252.070] (II) UnloadModule: "libinput"
[   252.070] (II) systemd-logind: releasing fd for 13:69
[   252.094] (II) UnloadModule: "libinput"
[   252.094] (II) systemd-logind: releasing fd for 13:68
[   252.096] (II) UnloadModule: "libinput"
[   252.096] (II) systemd-logind: releasing fd for 13:67
[   252.098] (II) UnloadModule: "libinput"
[   252.098] (II) systemd-logind: releasing fd for 13:65
[   252.104] (WW) xf86CloseConsole: KDSETMODE failed: Input/output error
[   252.104] (WW) xf86CloseConsole: VT_GETMODE failed: Input/output error
[   252.104] (WW) xf86CloseConsole: VT_ACTIVATE failed: Input/output error
[   252.114] (II) Server terminated successfully (0). Closing log file.

Dernière modification par Xaxou (Le 01/03/2020, à 14:20)

xubu1957

Re : [Résolu] AMD Radeon sur Lenovo Ideapad 330 (application : Blender)

Bonjour,

Montre :

lspci -vnn | grep -A12 '\''[030[02]\]' | grep -Ei "vga|3d|display|kernel"

---

Conseils pour les nouveaux demandeurs et pas qu'eux
Important : Pensez à passer vos sujets en [Résolu] lorsque ceux-ci le sont, au début du titre en cliquant sur Modifier sous le premier message, et un bref récapitulatif de la solution à la fin de celui-ci. Merci.                   Membre de Linux-Azur

Xaxou

Re : [Résolu] AMD Radeon sur Lenovo Ideapad 330 (application : Blender)

Bonjour,

xavier@elrond:~$ lspci -vnn | grep -A12 '\''[030[02]\]' | grep -Ei "vga|3d|display|kernel"
00:02.0 VGA compatible controller [0300]: Intel Corporation UHD Graphics 620 [8086:5917] (rev 07) (prog-if 00 [VGA controller])
	Kernel driver in use: i915
	Kernel modules: i915
xavier@elrond:~$ 

J'en profite pour indiquer que j'avais essayé de me lancer dans une installation de pilote, mais que je me suis arrêté au téléchargement :
https://www.amd.com/en/support/kb/relea … -lin-18-20
Je ne sais pas si ça peut jouer sur la réponse à cette commande.

Xaxou

Re : [Résolu] AMD Radeon sur Lenovo Ideapad 330 (application : Blender)

(et j'en profite pour indiquer aussi que je suppose un même problème de pilote ou de modèle avec ma carte Wifi, mais que je ne l'ai pas rendu objectif de façon similaire : dans l'idéal, si on peut faire d'une pierre deux coups...)

xubu1957

Re : [Résolu] AMD Radeon sur Lenovo Ideapad 330 (application : Blender)

Bonjour,

Fournis :

lspci -nnk | grep 0280 -A3

---

Conseils pour les nouveaux demandeurs et pas qu'eux
Important : Pensez à passer vos sujets en [Résolu] lorsque ceux-ci le sont, au début du titre en cliquant sur Modifier sous le premier message, et un bref récapitulatif de la solution à la fin de celui-ci. Merci.                   Membre de Linux-Azur

Xaxou

Re : [Résolu] AMD Radeon sur Lenovo Ideapad 330 (application : Blender)

Bonjour,

xavier@elrond:~$ lspci -nnk | grep 0280 -A3
03:00.0 Network controller [0280]: Qualcomm Atheros QCA9377 802.11ac Wireless Network Adapter [168c:0042] (rev 31)
	Subsystem: Lenovo QCA9377 802.11ac Wireless Network Adapter [17aa:0901]
	Kernel driver in use: ath10k_pci
	Kernel modules: ath10k_pci
xavier@elrond:~$ 

... mais je ne suis pas à même de dire si c'est ou non le bon modèle. Selon la facture, l'ordinateur est un "Ideapad 330-17IKBR", mais le modèle de la carte Wifi n'est pas indiqué. Lorsque je cherche en ligne, je trouve ce lien chez Lenovo : la référence de la carte Wifi n'est pas précisée. Bref, si c'est trop complexe, pas de soucis pour se recentrer sur la carte graphique.

xubu1957

Re : [Résolu] AMD Radeon sur Lenovo Ideapad 330 (application : Blender)

 Intel Corporation UHD Graphics 620

La carte graphique est une Intel.

En matière de carte graphique, je ne sais pas gérer.

_ _ _

Vu cette ligne au post #1 :

[   126.721] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.19.5-041905-generic root=UUID=1f0a9507-f872-4e22-ba9e-1547174c872f ro recovery nomodeset

Regarde cette discussion > [Résolu] Dell Latitude 5490 - Driver Intel Graphics -- nomodset
_ _ _

Pour le problème du wifi, ouvre une discussion en section > WIFI

Pour le Wi-Fi, on pourra continuer dans > Signal wifi faible / côté récepteur ?

Dernière modification par xubu1957 (Le 23/02/2020, à 18:45)

---

Conseils pour les nouveaux demandeurs et pas qu'eux
Important : Pensez à passer vos sujets en [Résolu] lorsque ceux-ci le sont, au début du titre en cliquant sur Modifier sous le premier message, et un bref récapitulatif de la solution à la fin de celui-ci. Merci.                   Membre de Linux-Azur

Xaxou

Re : [Résolu] AMD Radeon sur Lenovo Ideapad 330 (application : Blender)

Bonjour,

Intel Corporation UHD Graphics 620

La carte graphique est une Intel.

En matière de carte graphique, je ne sais pas gérer.

_ _ _

Vu cette ligne au post #1 :

[   126.721] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.19.5-041905-generic root=UUID=1f0a9507-f872-4e22-ba9e-1547174c872f ro recovery nomodeset

Regarde cette discussion > [Résolu] Dell Latitude 5490 - Driver Intel Graphics -- nomodset

Sauf erreur de ma part, la carte n'est pas une Intel. Cf. le premier post : si j'en crois l'autocollant près du TouchPad comme le site de Linux-Shop, c'est une (AMD) "Radeon Graphics". Et c'est bien ça qui me chagrine vis-à-vis de la configuration de Blender (cf. le premier post toujours).

Merci pour le lien vers l'autre post : je vais tenter de comprendre comment je dois mettre en pratique pour appliquer à mon cas. Je dois dire que "grub" ne me parle pas du tout.
... et pour le Wifi, je vois dans un second temps : je risque de revenir t'embêter dans une autre section du forum !

Bonne journée,
Xavier

xubu1957

Re : [Résolu] AMD Radeon sur Lenovo Ideapad 330 (application : Blender)

Montre :

lspci

pour détecter une éventuelle autre carte graphique.

---

Conseils pour les nouveaux demandeurs et pas qu'eux
Important : Pensez à passer vos sujets en [Résolu] lorsque ceux-ci le sont, au début du titre en cliquant sur Modifier sous le premier message, et un bref récapitulatif de la solution à la fin de celui-ci. Merci.                   Membre de Linux-Azur

Xaxou

Re : [Résolu] AMD Radeon sur Lenovo Ideapad 330 (application : Blender)

De ce que je lis, il insiste sur du Intel :

xavier@elrond:~$ lspci
00:00.0 Host bridge: Intel Corporation Xeon E3-1200 v6/7th Gen Core Processor Host Bridge/DRAM Registers (rev 08)
00:02.0 VGA compatible controller: Intel Corporation UHD Graphics 620 (rev 07)
00:14.0 USB controller: Intel Corporation Sunrise Point-LP USB 3.0 xHCI Controller (rev 21)
00:14.2 Signal processing controller: Intel Corporation Sunrise Point-LP Thermal subsystem (rev 21)
00:15.0 Signal processing controller: Intel Corporation Sunrise Point-LP Serial IO I2C Controller #0 (rev 21)
00:16.0 Communication controller: Intel Corporation Sunrise Point-LP CSME HECI #1 (rev 21)
00:17.0 SATA controller: Intel Corporation Sunrise Point-LP SATA Controller [AHCI mode] (rev 21)
00:1c.0 PCI bridge: Intel Corporation Sunrise Point-LP PCI Express Root Port #1 (rev f1)
00:1c.4 PCI bridge: Intel Corporation Sunrise Point-LP PCI Express Root Port #5 (rev f1)
00:1c.5 PCI bridge: Intel Corporation Sunrise Point-LP PCI Express Root Port #6 (rev f1)
00:1f.0 ISA bridge: Intel Corporation Intel(R) 100 Series Chipset Family LPC Controller/eSPI Controller - 9D4E (rev 21)
00:1f.2 Memory controller: Intel Corporation Sunrise Point-LP PMC (rev 21)
00:1f.3 Audio device: Intel Corporation Sunrise Point-LP HD Audio (rev 21)
00:1f.4 SMBus: Intel Corporation Sunrise Point-LP SMBus (rev 21)
01:00.0 Display controller: Advanced Micro Devices, Inc. [AMD/ATI] Topaz XT [Radeon R7 M260/M265 / M340/M360 / M440/M445] (rev c3)
02:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller (rev 10)
03:00.0 Network controller: Qualcomm Atheros QCA9377 802.11ac Wireless Network Adapter (rev 31)
xavier@elrond:~$ 

Je me re-penche sur le "grub". Peut-être que le "nomodeset" me fera d'une pierre deux coups...

xubu1957

Re : [Résolu] AMD Radeon sur Lenovo Ideapad 330 (application : Blender)

Tu peux montrer :

sudo lshw -C video -C cpu

?

Je pompe dans > askubuntu.com/questions/984466/install-amd-topaz-xt-radeon-r7-driver-on-ubuntu-17-10

Dernière modification par xubu1957 (Le 23/02/2020, à 16:57)

---

Conseils pour les nouveaux demandeurs et pas qu'eux
Important : Pensez à passer vos sujets en [Résolu] lorsque ceux-ci le sont, au début du titre en cliquant sur Modifier sous le premier message, et un bref récapitulatif de la solution à la fin de celui-ci. Merci.                   Membre de Linux-Azur

Xaxou

Re : [Résolu] AMD Radeon sur Lenovo Ideapad 330 (application : Blender)

Bien sûr !

xavier@elrond:~$ sudo lshw -C video -C cpu
[sudo] Mot de passe de xavier : 
  *-cpu                     
       description: CPU
       produit: Intel(R) Core(TM) i5-8250U CPU @ 1.60GHz
       fabriquant: Intel Corp.
       identifiant matériel: 4
       information bus: cpu@0
       version: Intel(R) Core(TM) i5-8250U CPU @ 1.60GHz
       numéro de série: To Be Filled By O.E.M.
       emplacement: U3E1
       taille: 1538MHz
       capacité: 4005MHz
       bits: 64 bits
       horloge: 100MHz
       fonctionnalités: x86-64 fpu fpu_exception wp vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx pdpe1gb rdtscp constant_tsc art arch_perfmon pebs bts rep_good nopl xtopology nonstop_tsc cpuid aperfmperf tsc_known_freq pni pclmulqdq dtes64 monitor ds_cpl vmx est tm2 ssse3 sdbg fma cx16 xtpr pdcm pcid sse4_1 sse4_2 x2apic movbe popcnt tsc_deadline_timer aes xsave avx f16c rdrand lahf_lm abm 3dnowprefetch cpuid_fault invpcid_single pti ssbd ibrs ibpb stibp tpr_shadow vnmi flexpriority ept vpid ept_ad fsgsbase tsc_adjust bmi1 avx2 smep bmi2 erms invpcid mpx rdseed adx smap clflushopt intel_pt xsaveopt xsavec xgetbv1 xsaves dtherm ida arat pln pts hwp hwp_notify hwp_act_window hwp_epp md_clear flush_l1d cpufreq
       configuration: cores=4 enabledcores=4 threads=8
  *-display
       description: VGA compatible controller
       produit: UHD Graphics 620
       fabriquant: Intel Corporation
       identifiant matériel: 2
       information bus: pci@0000:00:02.0
       version: 07
       bits: 64 bits
       horloge: 33MHz
       fonctionnalités: pciexpress msi pm vga_controller bus_master cap_list rom
       configuration: driver=i915 latency=0
       ressources: irq:130 mémoire:b1000000-b1ffffff mémoire:c0000000-cfffffff portE/S:5000(taille=64) mémoire:c0000-dffff
  *-display
       description: Display controller
       produit: Topaz XT [Radeon R7 M260/M265 / M340/M360 / M440/M445]
       fabriquant: Advanced Micro Devices, Inc. [AMD/ATI]
       identifiant matériel: 0
       information bus: pci@0000:01:00.0
       version: c3
       bits: 64 bits
       horloge: 33MHz
       fonctionnalités: pm pciexpress msi bus_master cap_list rom
       configuration: driver=amdgpu latency=0
       ressources: irq:132 mémoire:a0000000-afffffff mémoire:b0000000-b01fffff portE/S:4000(taille=256) mémoire:b2300000-b233ffff mémoire:b2340000-b235ffff
xavier@elrond:~$ 

On retrouve bien :
  *-display
       description: Display controller
       produit: Topaz XT [Radeon R7 M260/M265 / M340/M360 / M440/M445]
       fabriquant: Advanced Micro Devices, Inc. [AMD/ATI]

xubu1957

Re : [Résolu] AMD Radeon sur Lenovo Ideapad 330 (application : Blender)

Et là, c'est fêlé (failed) > linux-hardware.org/index.php?id=pci:1002-6900-03ea-1af4

Il faut des aidants spécialistes.

_ _ _

(edit=messages regroupés)
_ _ _

[   126.721] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.19.5-041905-generic root=UUID=1f0a9507-f872-4e22-ba9e-1547174c872f ro recovery nomodeset

Tu es resté sur le noyau expérimental 4.19.5-041905 ?

Dernière modification par xubu1957 (Le 23/02/2020, à 18:46)

---

Conseils pour les nouveaux demandeurs et pas qu'eux
Important : Pensez à passer vos sujets en [Résolu] lorsque ceux-ci le sont, au début du titre en cliquant sur Modifier sous le premier message, et un bref récapitulatif de la solution à la fin de celui-ci. Merci.                   Membre de Linux-Azur

Xaxou

Re : [Résolu] AMD Radeon sur Lenovo Ideapad 330 (application : Blender)

Tu es resté sur le noyau expérimental 4.19.5-041905 ?

J'ai effectué des mises à jour, je pense que tel n'est plus le cas. Peut-être vas-tu avoir la réponse dans mon paragraphe suivant.

J'ai tenté d'aller voir ce qui relève du nomodeset dans le grub, conformément au post indiqué. Quand je regarde le fichier /etc/default/grub, j'ai du "quiet splash" :

# If you change this file, run 'update-grub' afterwards to update
# /boot/grub/grub.cfg.
# For full documentation of the options in this file, see:
#   info -f grub -n 'Simple configuration'

GRUB_DEFAULT=0
GRUB_TIMEOUT_STYLE=hidden
GRUB_TIMEOUT=10
GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian`
GRUB_CMDLINE_LINUX_DEFAULT="quiet splash"
GRUB_CMDLINE_LINUX=""

# Uncomment to enable BadRAM filtering, modify to suit your needs
# This works with Linux (no patch required) and with any kernel that obtains
# the memory map information from GRUB (GNU Mach, kernel of FreeBSD ...)
#GRUB_BADRAM="0x01234567,0xfefefefe,0x89abcdef,0xefefefef"

# Uncomment to disable graphical terminal (grub-pc only)
#GRUB_TERMINAL=console

# The resolution used on graphical terminal
# note that you can use only modes which your graphic card supports via VBE
# you can see them in real GRUB with the command `vbeinfo'
#GRUB_GFXMODE=640x480

# Uncomment if you don't want GRUB to pass "root=UUID=xxx" parameter to Linux
#GRUB_DISABLE_LINUX_UUID=true

# Uncomment to disable generation of recovery mode menu entries
#GRUB_DISABLE_RECOVERY="true"

# Uncomment to get a beep at grub start
#GRUB_INIT_TUNE="480 440 1"

Et ça se confirme quand je fais la manip (Echap au démarrage, puis "e" une fois dans le grub), où apparaît une ligne du type :

linux        /boot/vmlinuz-5.1.6-050106-generic root=UUID=(code hexadecimal ?, non relevé) ro  quiet splash $vt_handoff

où on peut noter :
- que le noyau apparaît comme "generic", ce qui répond peut-être à la question précédente ;
- que la partie entre parenthèse n'est pas ce qui apparaît (je n'ai pas relevé le supposé code hexadécimal, je peux le faire si nécessaire) ;
- qu'il y a deux espaces entre "ro" et "quiet splash".

Il faut des aidants spécialistes.

J'imagine que le mieux à mon niveau est de croiser les doigts pour qu'ils passent sur ce post et prennent connaissance de la discussion ?

xubu1957

Re : [Résolu] AMD Radeon sur Lenovo Ideapad 330 (application : Blender)

Le noyau 5.1.6-050106-generic, n'est pas un noyau issu de la table officielle > linux-headers-generic

_ _ _

J'ai lancé un appel aux aidants > ./viewtopic.php?pid=22225692#p22225692

Dernière modification par xubu1957 (Le 23/02/2020, à 17:24)

---

Conseils pour les nouveaux demandeurs et pas qu'eux
Important : Pensez à passer vos sujets en [Résolu] lorsque ceux-ci le sont, au début du titre en cliquant sur Modifier sous le premier message, et un bref récapitulatif de la solution à la fin de celui-ci. Merci.                   Membre de Linux-Azur

Xaxou

Re : [Résolu] AMD Radeon sur Lenovo Ideapad 330 (application : Blender)

Merci beaucoup ! J'en profite pour actualiser les données qui seront utiles :
1/ J'avais suivi les recommandations de Linux Shop (vendeur de l'ordinateur), à savoir installer Ukuu et mettre à jour avec des noyaux plus récents. J'ai donné suite à la recommandation de Xubu1957 pour me retrouver avec ce que je pense être le dernier noyau issu de la table officielle fléchant "amd64 i386", à savoir la v5.0.0. Elle apparaît via Ukuu comme

v5.0.0-050000.201903032031

2/ Je remets le fichier /var/log/Xorg.0.log (qui me semble ne pas avoir changé malgré cette manipulation) :

[   126.719] (--) Log file renamed from "/var/log/Xorg.pid-2497.log" to "/var/log/Xorg.0.log"
[   126.721] 
X.Org X Server 1.19.6
Release Date: 2017-12-20
[   126.721] X Protocol Version 11, Revision 0
[   126.721] Build Operating System: Linux 4.4.0-138-generic x86_64 Ubuntu
[   126.721] Current Operating System: Linux elrond 4.19.5-041905-generic #201811271131 SMP Tue Nov 27 16:33:46 UTC 2018 x86_64
[   126.721] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.19.5-041905-generic root=UUID=1f0a9507-f872-4e22-ba9e-1547174c872f ro recovery nomodeset
[   126.721] Build Date: 25 October 2018  04:11:27PM
[   126.721] xorg-server 2:1.19.6-1ubuntu4.2 (For technical support please see http://www.ubuntu.com/support) 
[   126.721] Current version of pixman: 0.34.0
[   126.721] 	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
[   126.721] Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[   126.721] (==) Log file: "/var/log/Xorg.0.log", Time: Mon May  6 21:49:41 2019
[   126.722] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[   126.723] (==) No Layout section.  Using the first Screen section.
[   126.723] (==) No screen section available. Using defaults.
[   126.723] (**) |-->Screen "Default Screen Section" (0)
[   126.723] (**) |   |-->Monitor "<default monitor>"
[   126.724] (==) No monitor specified for screen "Default Screen Section".
	Using a default monitor configuration.
[   126.724] (==) Automatically adding devices
[   126.724] (==) Automatically enabling devices
[   126.724] (==) Automatically adding GPU devices
[   126.724] (==) Automatically binding GPU devices
[   126.725] (==) Max clients allowed: 256, resource mask: 0x1fffff
[   126.727] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[   126.727] 	Entry deleted from font path.
[   126.727] (WW) The directory "/usr/share/fonts/X11/100dpi/" does not exist.
[   126.727] 	Entry deleted from font path.
[   126.727] (WW) The directory "/usr/share/fonts/X11/75dpi/" does not exist.
[   126.727] 	Entry deleted from font path.
[   126.727] (WW) The directory "/usr/share/fonts/X11/100dpi" does not exist.
[   126.727] 	Entry deleted from font path.
[   126.727] (WW) The directory "/usr/share/fonts/X11/75dpi" does not exist.
[   126.727] 	Entry deleted from font path.
[   126.727] (==) FontPath set to:
	/usr/share/fonts/X11/misc,
	/usr/share/fonts/X11/Type1,
	built-ins
[   126.727] (==) ModulePath set to "/usr/lib/xorg/modules"
[   126.727] (II) The server relies on udev to provide the list of input devices.
	If no devices become available, reconfigure udev or disable AutoAddDevices.
[   126.727] (II) Loader magic: 0x556b99e2d020
[   126.727] (II) Module ABI versions:
[   126.727] 	X.Org ANSI C Emulation: 0.4
[   126.727] 	X.Org Video Driver: 23.0
[   126.727] 	X.Org XInput driver : 24.1
[   126.727] 	X.Org Server Extension : 10.0
[   126.728] (++) using VT number 1

[   126.729] (II) systemd-logind: took control of session /org/freedesktop/login1/session/_31
[   126.731] (--) PCI:*(0:0:2:0) 8086:5917:17aa:3964 rev 7, Mem @ 0xb1000000/16777216, 0xc0000000/268435456, I/O @ 0x00005000/64, BIOS @ 0x????????/131072
[   126.731] (--) PCI: (0:1:0:0) 1002:6900:17aa:3964 rev 195, Mem @ 0xa0000000/268435456, 0xb0000000/2097152, 0xb2300000/262144, I/O @ 0x00004000/256, BIOS @ 0x????????/131072
[   126.731] (II) LoadModule: "glx"
[   126.731] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[   126.740] (II) Module glx: vendor="X.Org Foundation"
[   126.740] 	compiled for 1.19.6, module version = 1.0.0
[   126.740] 	ABI class: X.Org Server Extension, version 10.0
[   126.740] (==) Matched modesetting as autoconfigured driver 0
[   126.740] (==) Matched fbdev as autoconfigured driver 1
[   126.740] (==) Matched vesa as autoconfigured driver 2
[   126.740] (==) Assigned the driver to the xf86ConfigLayout
[   126.740] (II) LoadModule: "modesetting"
[   126.741] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[   126.742] (II) Module modesetting: vendor="X.Org Foundation"
[   126.742] 	compiled for 1.19.6, module version = 1.19.6
[   126.742] 	Module class: X.Org Video Driver
[   126.742] 	ABI class: X.Org Video Driver, version 23.0
[   126.742] (II) LoadModule: "fbdev"
[   126.742] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[   126.743] (II) Module fbdev: vendor="X.Org Foundation"
[   126.743] 	compiled for 1.19.3, module version = 0.4.4
[   126.743] 	Module class: X.Org Video Driver
[   126.743] 	ABI class: X.Org Video Driver, version 23.0
[   126.743] (II) LoadModule: "vesa"
[   126.743] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[   126.743] (II) Module vesa: vendor="X.Org Foundation"
[   126.743] 	compiled for 1.19.3, module version = 2.3.4
[   126.743] 	Module class: X.Org Video Driver
[   126.743] 	ABI class: X.Org Video Driver, version 23.0
[   126.743] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[   126.743] (II) FBDEV: driver for framebuffer: fbdev
[   126.743] (II) VESA: driver for VESA chipsets: vesa
[   126.743] (EE) open /dev/dri/card0: No such file or directory
[   126.743] (WW) Falling back to old probe method for modesetting
[   126.743] (EE) open /dev/dri/card0: No such file or directory
[   126.743] (II) Loading sub module "fbdevhw"
[   126.743] (II) LoadModule: "fbdevhw"
[   126.743] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[   126.744] (II) Module fbdevhw: vendor="X.Org Foundation"
[   126.744] 	compiled for 1.19.6, module version = 0.0.2
[   126.744] 	ABI class: X.Org Video Driver, version 23.0
[   126.744] (**) FBDEV(1): claimed PCI slot 0@0:2:0
[   126.744] (II) FBDEV(1): using default device
[   126.744] (WW) Falling back to old probe method for vesa
[   126.744] (EE) Screen 0 deleted because of no matching config section.
[   126.744] (II) UnloadModule: "modesetting"
[   126.744] (II) FBDEV(0): Creating default Display subsection in Screen section
	"Default Screen Section" for depth/fbbpp 24/32
[   126.744] (==) FBDEV(0): Depth 24, (==) framebuffer bpp 32
[   126.744] (==) FBDEV(0): RGB weight 888
[   126.744] (==) FBDEV(0): Default visual is TrueColor
[   126.744] (==) FBDEV(0): Using gamma correction (1.0, 1.0, 1.0)
[   126.744] (II) FBDEV(0): hardware: EFI VGA (video memory: 5632kB)
[   126.744] (II) FBDEV(0): checking modes against framebuffer device...
[   126.744] (II) FBDEV(0): checking modes against monitor...
[   126.744] (--) FBDEV(0): Virtual size is 1600x900 (pitch 1600)
[   126.744] (**) FBDEV(0):  Built-in mode "current": 144.0 MHz, 70.9 kHz, 76.7 Hz
[   126.744] (II) FBDEV(0): Modeline "current"x0.0  144.01  1600 1632 1832 2032  900 904 908 924 -hsync -vsync -csync (70.9 kHz b)
[   126.744] (==) FBDEV(0): DPI set to (96, 96)
[   126.744] (II) Loading sub module "fb"
[   126.744] (II) LoadModule: "fb"
[   126.744] (II) Loading /usr/lib/xorg/modules/libfb.so
[   126.745] (II) Module fb: vendor="X.Org Foundation"
[   126.745] 	compiled for 1.19.6, module version = 1.0.0
[   126.745] 	ABI class: X.Org ANSI C Emulation, version 0.4
[   126.745] (**) FBDEV(0): using shadow framebuffer
[   126.745] (II) Loading sub module "shadow"
[   126.745] (II) LoadModule: "shadow"
[   126.745] (II) Loading /usr/lib/xorg/modules/libshadow.so
[   126.746] (II) Module shadow: vendor="X.Org Foundation"
[   126.746] 	compiled for 1.19.6, module version = 1.1.0
[   126.746] 	ABI class: X.Org ANSI C Emulation, version 0.4
[   126.746] (II) UnloadModule: "vesa"
[   126.746] (II) Unloading vesa
[   126.746] (==) Depth 24 pixmap format is 32 bpp
[   126.746] (II) FBDEV(0): FBIOBLANK: Invalid argument (Screen blanking not supported by kernel - disabling)
[   126.748] (==) FBDEV(0): Backing store enabled
[   126.749] (==) FBDEV(0): DPMS enabled
[   126.749] (==) RandR enabled
[   126.752] (II) SELinux: Disabled on system
[   126.752] (II) AIGLX: Screen 0 is not DRI2 capable
[   126.752] (EE) AIGLX: reverting to software rendering
[   126.899] (II) IGLX: enabled GLX_MESA_copy_sub_buffer
[   126.899] (II) IGLX: Loaded and initialized swrast
[   126.899] (II) GLX: Initialized DRISWRAST GL provider for screen 0
[   126.938] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[   126.938] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[   126.938] (II) LoadModule: "libinput"
[   126.938] (II) Loading /usr/lib/xorg/modules/input/libinput_drv.so
[   126.972] (II) Module libinput: vendor="X.Org Foundation"
[   126.972] 	compiled for 1.19.6, module version = 0.27.1
[   126.972] 	Module class: X.Org XInput Driver
[   126.972] 	ABI class: X.Org XInput driver, version 24.1
[   126.972] (II) Using input driver 'libinput' for 'Power Button'
[   126.973] (II) systemd-logind: got fd for /dev/input/event1 13:65 fd 22 paused 0
[   126.973] (**) Power Button: always reports core events
[   126.973] (**) Option "Device" "/dev/input/event1"
[   126.973] (**) Option "_source" "server/udev"
[   126.973] (II) event1  - Power Button: is tagged by udev as: Keyboard
[   126.973] (II) event1  - Power Button: device is a keyboard
[   126.973] (II) event1  - Power Button: device removed
[   126.973] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1/event1"
[   126.973] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[   126.973] (**) Option "xkb_layout" "fr"
[   126.974] (**) Option "xkb_variant" "oss"
[   126.986] (II) event1  - Power Button: is tagged by udev as: Keyboard
[   126.986] (II) event1  - Power Button: device is a keyboard
[   126.986] (II) config/udev: Adding input device Lid Switch (/dev/input/event0)
[   126.986] (II) No input driver specified, ignoring this device.
[   126.986] (II) This device may have been added with another device file.
[   126.987] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/event3)
[   126.987] (**) Logitech USB Receiver: Applying InputClass "libinput keyboard catchall"
[   126.987] (II) Using input driver 'libinput' for 'Logitech USB Receiver'
[   126.987] (II) systemd-logind: got fd for /dev/input/event3 13:67 fd 25 paused 0
[   126.987] (**) Logitech USB Receiver: always reports core events
[   126.987] (**) Option "Device" "/dev/input/event3"
[   126.987] (**) Option "_source" "server/udev"
[   126.988] (II) event3  - Logitech USB Receiver: is tagged by udev as: Keyboard
[   126.988] (II) event3  - Logitech USB Receiver: device is a keyboard
[   126.988] (II) event3  - Logitech USB Receiver: device removed
[   126.988] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3:1.0/0003:046D:C534.0001/input/input3/event3"
[   126.988] (II) XINPUT: Adding extended input device "Logitech USB Receiver" (type: KEYBOARD, id 7)
[   126.988] (**) Option "xkb_layout" "fr"
[   126.988] (**) Option "xkb_variant" "oss"
[   126.988] (II) event3  - Logitech USB Receiver: is tagged by udev as: Keyboard
[   126.988] (II) event3  - Logitech USB Receiver: device is a keyboard
[   126.989] (II) config/udev: Adding input device Logitech USB Receiver Mouse (/dev/input/event4)
[   126.989] (**) Logitech USB Receiver Mouse: Applying InputClass "libinput pointer catchall"
[   126.989] (II) Using input driver 'libinput' for 'Logitech USB Receiver Mouse'
[   126.989] (II) systemd-logind: got fd for /dev/input/event4 13:68 fd 26 paused 0
[   126.989] (**) Logitech USB Receiver Mouse: always reports core events
[   126.989] (**) Option "Device" "/dev/input/event4"
[   126.989] (**) Option "_source" "server/udev"
[   126.990] (II) event4  - Logitech USB Receiver Mouse: is tagged by udev as: Mouse
[   126.990] (II) event4  - Logitech USB Receiver Mouse: device is a pointer
[   126.990] (II) event4  - Logitech USB Receiver Mouse: device removed
[   126.990] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3:1.1/0003:046D:C534.0002/input/input4/event4"
[   126.990] (II) XINPUT: Adding extended input device "Logitech USB Receiver Mouse" (type: MOUSE, id 8)
[   126.990] (**) Option "AccelerationScheme" "none"
[   126.990] (**) Logitech USB Receiver Mouse: (accel) selected scheme none/0
[   126.990] (**) Logitech USB Receiver Mouse: (accel) acceleration factor: 2.000
[   126.990] (**) Logitech USB Receiver Mouse: (accel) acceleration threshold: 4
[   126.990] (II) event4  - Logitech USB Receiver Mouse: is tagged by udev as: Mouse
[   126.990] (II) event4  - Logitech USB Receiver Mouse: device is a pointer
[   126.991] (II) config/udev: Adding input device Logitech USB Receiver Mouse (/dev/input/mouse0)
[   126.991] (II) No input driver specified, ignoring this device.
[   126.991] (II) This device may have been added with another device file.
[   126.991] (II) config/udev: Adding input device Logitech USB Receiver Consumer Control (/dev/input/event5)
[   126.991] (**) Logitech USB Receiver Consumer Control: Applying InputClass "libinput keyboard catchall"
[   126.991] (II) Using input driver 'libinput' for 'Logitech USB Receiver Consumer Control'
[   126.992] (II) systemd-logind: got fd for /dev/input/event5 13:69 fd 27 paused 0
[   126.992] (**) Logitech USB Receiver Consumer Control: always reports core events
[   126.992] (**) Option "Device" "/dev/input/event5"
[   126.992] (**) Option "_source" "server/udev"
[   126.992] (II) event5  - Logitech USB Receiver Consumer Control: is tagged by udev as: Keyboard
[   126.992] (II) event5  - Logitech USB Receiver Consumer Control: device is a keyboard
[   126.992] (II) event5  - Logitech USB Receiver Consumer Control: device removed
[   126.992] (II) libinput: Logitech USB Receiver Consumer Control: needs a virtual subdevice
[   126.992] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3:1.1/0003:046D:C534.0002/input/input5/event5"
[   126.992] (II) XINPUT: Adding extended input device "Logitech USB Receiver Consumer Control" (type: MOUSE, id 9)
[   126.992] (**) Option "AccelerationScheme" "none"
[   126.992] (**) Logitech USB Receiver Consumer Control: (accel) selected scheme none/0
[   126.992] (**) Logitech USB Receiver Consumer Control: (accel) acceleration factor: 2.000
[   126.992] (**) Logitech USB Receiver Consumer Control: (accel) acceleration threshold: 4
[   126.992] (II) event5  - Logitech USB Receiver Consumer Control: is tagged by udev as: Keyboard
[   126.993] (II) event5  - Logitech USB Receiver Consumer Control: device is a keyboard
[   126.993] (II) config/udev: Adding input device Logitech USB Receiver System Control (/dev/input/event6)
[   126.993] (**) Logitech USB Receiver System Control: Applying InputClass "libinput keyboard catchall"
[   126.993] (II) Using input driver 'libinput' for 'Logitech USB Receiver System Control'
[   126.993] (II) systemd-logind: got fd for /dev/input/event6 13:70 fd 28 paused 0
[   126.993] (**) Logitech USB Receiver System Control: always reports core events
[   126.993] (**) Option "Device" "/dev/input/event6"
[   126.993] (**) Option "_source" "server/udev"
[   126.994] (II) event6  - Logitech USB Receiver System Control: is tagged by udev as: Keyboard
[   126.994] (II) event6  - Logitech USB Receiver System Control: device is a keyboard
[   126.994] (II) event6  - Logitech USB Receiver System Control: device removed
[   126.994] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3:1.1/0003:046D:C534.0002/input/input6/event6"
[   126.994] (II) XINPUT: Adding extended input device "Logitech USB Receiver System Control" (type: KEYBOARD, id 10)
[   126.994] (**) Option "xkb_layout" "fr"
[   126.994] (**) Option "xkb_variant" "oss"
[   126.994] (II) event6  - Logitech USB Receiver System Control: is tagged by udev as: Keyboard
[   126.994] (II) event6  - Logitech USB Receiver System Control: device is a keyboard
[   126.995] (II) config/udev: Adding input device EasyCamera: EasyCamera (/dev/input/event7)
[   126.995] (**) EasyCamera: EasyCamera: Applying InputClass "libinput keyboard catchall"
[   126.995] (II) Using input driver 'libinput' for 'EasyCamera: EasyCamera'
[   126.995] (II) systemd-logind: got fd for /dev/input/event7 13:71 fd 29 paused 0
[   126.995] (**) EasyCamera: EasyCamera: always reports core events
[   126.995] (**) Option "Device" "/dev/input/event7"
[   126.995] (**) Option "_source" "server/udev"
[   126.996] (II) event7  - EasyCamera: EasyCamera: is tagged by udev as: Keyboard
[   126.996] (II) event7  - EasyCamera: EasyCamera: device is a keyboard
[   126.996] (II) event7  - EasyCamera: EasyCamera: device removed
[   126.996] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-8/1-8:1.0/input/input9/event7"
[   126.996] (II) XINPUT: Adding extended input device "EasyCamera: EasyCamera" (type: KEYBOARD, id 11)
[   126.996] (**) Option "xkb_layout" "fr"
[   126.996] (**) Option "xkb_variant" "oss"
[   126.996] (II) event7  - EasyCamera: EasyCamera: is tagged by udev as: Keyboard
[   126.996] (II) event7  - EasyCamera: EasyCamera: device is a keyboard
[   126.997] (II) config/udev: Adding input device Elan Touchpad (/dev/input/event8)
[   126.997] (**) Elan Touchpad: Applying InputClass "libinput touchpad catchall"
[   126.997] (II) Using input driver 'libinput' for 'Elan Touchpad'
[   126.997] (II) systemd-logind: got fd for /dev/input/event8 13:72 fd 30 paused 0
[   126.997] (**) Elan Touchpad: always reports core events
[   126.997] (**) Option "Device" "/dev/input/event8"
[   126.997] (**) Option "_source" "server/udev"
[   126.998] (II) event8  - Elan Touchpad: is tagged by udev as: Touchpad
[   126.998] (II) event8  - Elan Touchpad: device is a touchpad
[   126.998] (II) event8  - Elan Touchpad: device removed
[   126.998] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:15.0/i2c_designware.0/i2c-0/i2c-ELAN061D:00/input/input10/event8"
[   126.998] (II) XINPUT: Adding extended input device "Elan Touchpad" (type: TOUCHPAD, id 12)
[   126.998] (**) Option "AccelerationScheme" "none"
[   126.998] (**) Elan Touchpad: (accel) selected scheme none/0
[   126.998] (**) Elan Touchpad: (accel) acceleration factor: 2.000
[   126.998] (**) Elan Touchpad: (accel) acceleration threshold: 4
[   126.998] (II) event8  - Elan Touchpad: is tagged by udev as: Touchpad
[   126.998] (II) event8  - Elan Touchpad: device is a touchpad
[   126.999] (II) config/udev: Adding input device Elan Touchpad (/dev/input/mouse1)
[   126.999] (II) No input driver specified, ignoring this device.
[   126.999] (II) This device may have been added with another device file.
[   126.999] (II) config/udev: Adding input device HDA Intel PCH Mic (/dev/input/event9)
[   126.999] (II) No input driver specified, ignoring this device.
[   126.999] (II) This device may have been added with another device file.
[   127.000] (II) config/udev: Adding input device HDA Intel PCH Headphone (/dev/input/event10)
[   127.000] (II) No input driver specified, ignoring this device.
[   127.000] (II) This device may have been added with another device file.
[   127.000] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event2)
[   127.000] (**) AT Translated Set 2 keyboard: Applying InputClass "libinput keyboard catchall"
[   127.000] (II) Using input driver 'libinput' for 'AT Translated Set 2 keyboard'
[   127.000] (II) systemd-logind: got fd for /dev/input/event2 13:66 fd 31 paused 0
[   127.000] (**) AT Translated Set 2 keyboard: always reports core events
[   127.000] (**) Option "Device" "/dev/input/event2"
[   127.000] (**) Option "_source" "server/udev"
[   127.001] (II) event2  - AT Translated Set 2 keyboard: is tagged by udev as: Keyboard
[   127.001] (II) event2  - AT Translated Set 2 keyboard: device is a keyboard
[   127.001] (II) event2  - AT Translated Set 2 keyboard: device removed
[   127.001] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input2/event2"
[   127.001] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 13)
[   127.001] (**) Option "xkb_layout" "fr"
[   127.001] (**) Option "xkb_variant" "oss"
[   127.001] (II) event2  - AT Translated Set 2 keyboard: is tagged by udev as: Keyboard
[   127.001] (II) event2  - AT Translated Set 2 keyboard: device is a keyboard
[   127.006] (**) Logitech USB Receiver Consumer Control: Applying InputClass "libinput keyboard catchall"
[   127.006] (II) Using input driver 'libinput' for 'Logitech USB Receiver Consumer Control'
[   127.006] (II) systemd-logind: returning pre-existing fd for /dev/input/event5 13:69
[   127.006] (**) Logitech USB Receiver Consumer Control: always reports core events
[   127.006] (**) Option "Device" "/dev/input/event5"
[   127.006] (**) Option "_source" "_driver/libinput"
[   127.006] (II) libinput: Logitech USB Receiver Consumer Control: is a virtual subdevice
[   127.006] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3:1.1/0003:046D:C534.0002/input/input5/event5"
[   127.006] (II) XINPUT: Adding extended input device "Logitech USB Receiver Consumer Control" (type: KEYBOARD, id 14)
[   127.006] (**) Option "xkb_layout" "fr"
[   127.006] (**) Option "xkb_variant" "oss"
[   251.817] (**) Option "fd" "22"
[   251.817] (II) event1  - Power Button: device removed
[   251.817] (**) Option "fd" "25"
[   251.817] (II) event3  - Logitech USB Receiver: device removed
[   251.817] (**) Option "fd" "26"
[   251.817] (II) event4  - Logitech USB Receiver Mouse: device removed
[   251.817] (**) Option "fd" "27"
[   251.817] (**) Option "fd" "28"
[   251.817] (II) event6  - Logitech USB Receiver System Control: device removed
[   251.817] (**) Option "fd" "29"
[   251.817] (II) event7  - EasyCamera: EasyCamera: device removed
[   251.818] (**) Option "fd" "30"
[   251.818] (II) event8  - Elan Touchpad: device removed
[   251.818] (**) Option "fd" "31"
[   251.818] (II) event2  - AT Translated Set 2 keyboard: device removed
[   251.818] (**) Option "fd" "27"
[   251.818] (II) event5  - Logitech USB Receiver Consumer Control: device removed
[   251.827] (II) UnloadModule: "libinput"
[   251.827] (II) systemd-logind: not releasing fd for 13:69, still in use
[   251.827] (II) UnloadModule: "libinput"
[   251.827] (II) systemd-logind: releasing fd for 13:66
[   251.983] (II) UnloadModule: "libinput"
[   251.984] (II) systemd-logind: releasing fd for 13:72
[   252.013] (II) UnloadModule: "libinput"
[   252.014] (II) systemd-logind: releasing fd for 13:71
[   252.042] (II) UnloadModule: "libinput"
[   252.042] (II) systemd-logind: releasing fd for 13:70
[   252.070] (II) UnloadModule: "libinput"
[   252.070] (II) systemd-logind: releasing fd for 13:69
[   252.094] (II) UnloadModule: "libinput"
[   252.094] (II) systemd-logind: releasing fd for 13:68
[   252.096] (II) UnloadModule: "libinput"
[   252.096] (II) systemd-logind: releasing fd for 13:67
[   252.098] (II) UnloadModule: "libinput"
[   252.098] (II) systemd-logind: releasing fd for 13:65
[   252.104] (WW) xf86CloseConsole: KDSETMODE failed: Input/output error
[   252.104] (WW) xf86CloseConsole: VT_GETMODE failed: Input/output error
[   252.104] (WW) xf86CloseConsole: VT_ACTIVATE failed: Input/output error
[   252.114] (II) Server terminated successfully (0). Closing log file.

xubu1957

Re : [Résolu] AMD Radeon sur Lenovo Ideapad 330 (application : Blender)

Fournis les noyaux présents :

echo; dpkg -l | grep -Ei "linux-(g|h|i|lo|mo|si|t)" | grep -v ^rc | sort -k3 | awk '{print $1,$2,$3,$4}' | column -s" " -t ; echo ; uname -mr

---

Conseils pour les nouveaux demandeurs et pas qu'eux
Important : Pensez à passer vos sujets en [Résolu] lorsque ceux-ci le sont, au début du titre en cliquant sur Modifier sous le premier message, et un bref récapitulatif de la solution à la fin de celui-ci. Merci.                   Membre de Linux-Azur

Xaxou

Re : [Résolu] AMD Radeon sur Lenovo Ideapad 330 (application : Blender)

Les voilà :

xavier@elrond:~$ echo; dpkg -l | grep -Ei "linux-(g|h|i|lo|mo|si|t)" | grep -v ^rc | sort -k3 | awk '{print $1,$2,$3,$4}' | column -s" " -t ; echo ; uname -mr

ii  binutils-x86-64-linux-gnu                   2.30-21ubuntu1~18.04.2      amd64
ii  linux-headers-4.15.0-70                     4.15.0-70.79                all
ii  linux-modules-4.15.0-70-generic             4.15.0-70.79                amd64
ii  linux-headers-4.15.0-70-generic             4.15.0-70.79                amd64
ii  linux-image-4.15.0-70-generic               4.15.0-70.79                amd64
ii  linux-headers-4.15.0-76                     4.15.0-76.86                all
ii  linux-modules-4.15.0-76-generic             4.15.0-76.86                amd64
ii  linux-modules-extra-4.15.0-76-generic       4.15.0-76.86                amd64
ii  linux-headers-4.15.0-76-generic             4.15.0-76.86                amd64
ii  linux-image-4.15.0-76-generic               4.15.0-76.86                amd64
ii  linux-generic                               4.15.0.88.80                amd64
ii  linux-signed-generic                        4.15.0.88.80                amd64
ii  linux-headers-generic                       4.15.0.88.80                amd64
ii  linux-image-generic                         4.15.0.88.80                amd64
ii  linux-headers-4.15.0-88                     4.15.0-88.88                all
ii  linux-modules-4.15.0-88-generic             4.15.0-88.88                amd64
ii  linux-modules-extra-4.15.0-88-generic       4.15.0-88.88                amd64
ii  linux-headers-4.15.0-88-generic             4.15.0-88.88                amd64
ii  linux-image-4.15.0-88-generic               4.15.0-88.88                amd64
ii  linux-headers-4.19.5-041905                 4.19.5-041905.201811271131  all
ii  linux-modules-4.19.5-041905-generic         4.19.5-041905.201811271131  amd64
ii  linux-headers-4.19.5-041905-generic         4.19.5-041905.201811271131  amd64
ii  linux-image-unsigned-4.19.5-041905-generic  4.19.5-041905.201811271131  amd64
ii  linux-headers-5.0.0-050000                  5.0.0-050000.201903032031   all
ii  linux-modules-5.0.0-050000-generic          5.0.0-050000.201903032031   amd64
ii  linux-headers-5.0.0-050000-generic          5.0.0-050000.201903032031   amd64
ii  linux-image-unsigned-5.0.0-050000-generic   5.0.0-050000.201903032031   amd64

5.0.0-050000-generic x86_64
xavier@elrond:~$ 

xubu1957

Re : [Résolu] AMD Radeon sur Lenovo Ideapad 330 (application : Blender)

Je serais d'avis de tester avec un noyau 5.3, de la version 18.04.4 LTS.

> 18.04.x_Ubuntu_Kernel_Support

Mais il faut attendre du renfort.

---

Conseils pour les nouveaux demandeurs et pas qu'eux
Important : Pensez à passer vos sujets en [Résolu] lorsque ceux-ci le sont, au début du titre en cliquant sur Modifier sous le premier message, et un bref récapitulatif de la solution à la fin de celui-ci. Merci.                   Membre de Linux-Azur

Nuliel

Re : [Résolu] AMD Radeon sur Lenovo Ideapad 330 (application : Blender)

Bonjour,
Tu peux donner

cat /proc/cmdline

pour savoir si nomodeset est passé.

Ensuite il faudrait repasser sur les noyaux officiels, donc ne plus passer par ukuu. Je serais plutôt d'avis de repasser sur les noyaux 4.15 vu qu'ils sont installés. Il faudra pour cela dans le menu grub choisir options avancées et prendre le noyau 4.15 le plus récent et sans upstart ni recovery.

As tu passé

sudo update-grub

après avoir modifié /etc/default/grub?

Tu as la partie graphique du processeur et à côté une puce graphique amd radeon

Dernière modification par Nuliel (Le 23/02/2020, à 18:48)

---

[ poster un retour de commande ] [ poster une photo ]

Xaxou

Re : [Résolu] AMD Radeon sur Lenovo Ideapad 330 (application : Blender)

Bonjour Naziel (et re-bonjour xubu1957),

xavier@elrond:~$ cat /proc/cmdline
BOOT_IMAGE=/boot/vmlinuz-5.0.0-050000-generic root=UUID=1f0a9507-f872-4e22-ba9e-1547174c872f ro quiet splash vt.handoff=1
xavier@elrond:~$ 

Si je comprends bien, il n'y a pas de "nomodeset".

Pour le noyau : non, je n'ai pas lancé la commande. J'ai désinstallé la version 5.1.6 (me semble-t-il) après avoir installé la version 5.0.0, et me suis assuré que ça redémarrait bien sur celle-ci. Pas de soucis pour repasser sur une autre version via le grub : y a-t-il aussi une modification à faire dans le fichier "/etc/default/grub" ? Jusqu'ici je n'en ai pas effectué.

Enfin je n'ai pas compris la dernière ligne :

Tu as la partie graphique du processeur et à côté une puce graphique amd radeon

Peux-tu STP me repréciser ?

Xaxou

Re : [Résolu] AMD Radeon sur Lenovo Ideapad 330 (application : Blender)

... j'ai redémarré avec la version 4.15.0.88-generic (identifiée sous Ukuu comme 4.15.0-88.88) : dois-je faire quelque chose pour "stabiliser", de type mettre à jour des paquets et/ou passer une commande comme la suivante ?

sudo update-grub

En outre, quand on ne passe pas par Ukuu, quel est le procédé pour faire de telles mises à jour ? (je diverge un peu du sujet, mais ça me sera utile à l'occasion)

Nuliel

Re : [Résolu] AMD Radeon sur Lenovo Ideapad 330 (application : Blender)

Le processeur contient une partie graphique qui s'appelle UHD Graphics 620 et qui s'occupe de l'affichage actuellement, cela consomme moins que la puce amd radeon.
La puce graphique amd radeon sert en fait lorsque tu veux par exemple jouer, tu auras besoin de plus de puissance, cette puce graphique devrait alors être utilisée.
Ok pour /etc/default/grub, je croyais que tu avais enlevé nomodeset.

Tu peux passer

DRI_PRIME=1 glxinfo | grep vendor

Pas besoin de passer

sudo update-grub

du coup

Les mises à jour du noyau se font avec les autres mises à jour en fait

Dernière modification par Nuliel (Le 23/02/2020, à 19:16)

---

[ poster un retour de commande ] [ poster une photo ]

Xaxou

Re : [Résolu] AMD Radeon sur Lenovo Ideapad 330 (application : Blender)

Ok, merci beaucoup !

Ce qui est chouette, c'est de voir arriver des résultats sans rien comprendre à ce qu'on fait ! Mais voilà déjà le résultat de la commande passée :

xavier@elrond:~$ DRI_PRIME=1 glxinfo | grep vendor
server glx vendor string: SGI
client glx vendor string: Mesa Project and SGI
OpenGL vendor string: X.Org
xavier@elrond:~$ 

Nuliel

Re : [Résolu] AMD Radeon sur Lenovo Ideapad 330 (application : Blender)

DRI_PRIME=1 glxinfo | grep vendor a pour but d'essayer d'utiliser la puce amd radeon.

Lorsqu'on modifie le fichier /etc/default/grub, il faut passer sudo update-grub après pour prendre les modifications en compte.

C'est pas ce que j'attendais.
Tu peux donner

uname -r

que je sache quel noyau tu utilises actuellement

---

[ poster un retour de commande ] [ poster une photo ]