#26 Le 04/06/2020, à 18:20
- nisco
Re : [Résolu] Passage a 20.04 rate a cause de coupure de courant
Bon bin j'ai pu l'installer et maintenant il fonctionne très bien, hélas je n'ai plus le choix de l'OS au démarrage... J'ai donc du foirer quelque chose dans l'histoire avec le grub...
Je mets le boot-info okazou ça peut vous donner une idée du soucis et de la manière de le résoudre (soit boot-repair soit tout réinstaller...)
Soyons réalistes, demandons l'impossible
Hors ligne
#27 Le 04/06/2020, à 18:25
- xubu1957
Re : [Résolu] Passage a 20.04 rate a cause de coupure de courant
Collage du boot-info du #26 :
boot-info-4ppa124 [20200604_1916]
============================== Boot Info Summary ===============================
=> Grub2 (v2.00) is installed in the MBR of /dev/sda and looks at sector 1 of
the same hard drive for core.img. core.img is at this location and looks
for (,msdos6)/boot/grub. It also embeds following components:
modules
---------------------------------------------------------------------------
fshelp ext2 part_msdos biosdisk
---------------------------------------------------------------------------
sda1: __________________________________________________________________________
File system: ntfs
Boot sector type: Windows 7/2008: NTFS
Boot sector info: No errors found in the Boot Parameter Block.
Operating System:
Boot files: /bootmgr /boot/bcd
sda2: __________________________________________________________________________
File system: ntfs
Boot sector type: Windows 7/2008: NTFS
Boot sector info: No errors found in the Boot Parameter Block.
Operating System:
Boot files: /bootmgr /BOOT/BCD
sda3: __________________________________________________________________________
File system: ntfs
Boot sector type: Windows 7/2008: NTFS
Boot sector info: No errors found in the Boot Parameter Block.
Operating System: Windows 7
Boot files: /Windows/System32/winload.exe
sda4: __________________________________________________________________________
File system: Extended Partition
Boot sector type: -
Boot sector info:
sda5: __________________________________________________________________________
File system: ntfs
Boot sector type: Windows 7/2008: NTFS
Boot sector info: According to the info in the boot sector, sda5 starts
at sector 2048.
Operating System:
Boot files:
sda6: __________________________________________________________________________
File system: ext4
Boot sector type: -
Boot sector info:
Operating System: Ubuntu 20.04 LTS
Boot files: /boot/grub/grub.cfg /etc/fstab /etc/default/grub
/boot/grub/i386-pc/core.img
================================ 4 OS detected =================================
OS#1: L'OS actuellement utilisé - Ubuntu 20.04 LTS CurrentSession on sda6
OS#2: Windows Recovery Environment (boot) on sda1
OS#3: Windows 7 (boot) on sda2
OS#4: Windows 7 on sda3
============================ Architecture/Host Info ============================
CPU architecture: 64-bit
BOOT_IMAGE of the installed session in use:
/boot/vmlinuz-5.4.0-26-generic root=UUID=ec850f2b-d037-4cdf-8e72-51f5d7d48bbe ro quiet splash vt.handoff=7
===================================== UEFI =====================================
This installed-session is not in EFI-mode.
============================= Drive/Partition Info =============================
Disks info: ____________________________________________________________________
sda : notGPT, no-BIOSboot, has-noESP, not-usb, not-mmc, has-os, 2048 sectors * 512 bytes
Partitions info (1/3): _________________________________________________________
sda6 : is-os, 64, apt-get, grub-pc , grub2, grub-install, grubenv-ok, update-grub, farbios
sda1 : is-os, 32, nopakmgr, no-docgrub, nogrub, nogrubinstall, no-grubenv, noupdategrub, not-far
sda2 : is-os, 32, nopakmgr, no-docgrub, nogrub, nogrubinstall, no-grubenv, noupdategrub, not-far
sda3 : is-os, 32, nopakmgr, no-docgrub, nogrub, nogrubinstall, no-grubenv, noupdategrub, farbios
sda5 : no-os, 32, nopakmgr, no-docgrub, nogrub, nogrubinstall, no-grubenv, noupdategrub, farbios
Partitions info (2/3): _________________________________________________________
sda6 : isnotESP, fstab-without-efi, no-nt, no-winload, no-recov-nor-hid, no-bmgr, notwinboot
sda1 : isnotESP, part-has-no-fstab, no-nt, no-winload, recovery-or-hidden, bootmgr, is-winboot
sda2 : isnotESP, part-has-no-fstab, no-nt, no-winload, no-recov-nor-hid, bootmgr, is-winboot
sda3 : isnotESP, part-has-no-fstab, no-nt, haswinload, no-recov-nor-hid, no-bmgr, notwinboot
sda5 : isnotESP, part-has-no-fstab, no-nt, no-winload, no-recov-nor-hid, no-bmgr, notwinboot
Partitions info (3/3): _________________________________________________________
sda6 : not-sepboot, with-boot, fstab-without-boot, not-sep-usr, with--usr, fstab-without-usr, std-grub.d, sda
sda1 : not-sepboot, no-boot, part-has-no-fstab, not-sep-usr, no---usr, part-has-no-fstab, std-grub.d, sda
sda2 : not-sepboot, no-boot, part-has-no-fstab, not-sep-usr, no---usr, part-has-no-fstab, std-grub.d, sda
sda3 : not-sepboot, no-boot, part-has-no-fstab, not-sep-usr, no---usr, part-has-no-fstab, std-grub.d, sda
sda5 : not-sepboot, no-boot, part-has-no-fstab, not-sep-usr, no---usr, part-has-no-fstab, std-grub.d, sda
fdisk -l (filtered): ___________________________________________________________
Disk sda: 465.78 GiB, 500107862016 bytes, 976773168 sectors
Disk identifier: 0xdec82739
Boot Start End Sectors Size Id Type
sda1 * 2048 41945087 41943040 20G 27 Hidden NTFS WinRE
sda2 41945088 42149887 204800 100M 7 HPFS/NTFS/exFAT
sda3 42149888 358819839 316669952 151G 7 HPFS/NTFS/exFAT
sda4 358821886 976771071 617949186 294.7G f W95 Ext'd (LBA)
sda5 358821888 728094719 369272832 176.1G 7 HPFS/NTFS/exFAT
sda6 728096768 976771071 248674304 118.6G 83 Linux
parted -lm (filtered): _________________________________________________________
sda:500GB:scsi:512:512:msdos:ATA Hitachi HTS54505:;
1:1049kB:21.5GB:21.5GB:ntfs::boot, msftres;
2:21.5GB:21.6GB:105MB:ntfs::;
3:21.6GB:184GB:162GB:ntfs::;
4:184GB:500GB:316GB:::lba;
5:184GB:373GB:189GB:ntfs::;
6:373GB:500GB:127GB:ext4::;
blkid (filtered): ______________________________________________________________
NAME FSTYPE UUID PARTUUID LABEL PARTLABEL
sda
├─sda1 ntfs 8C22F21822F2074C dec82739-01 RECOVERY
├─sda2 ntfs 8AA06137A0612B41 dec82739-02 SYSTEM
├─sda3 ntfs F424F4BE24F48540 dec82739-03
├─sda4 dec82739-04
├─sda5 ntfs D4CC2CC8CC2CA728 dec82739-05
└─sda6 ext4 ec850f2b-d037-4cdf-8e72-51f5d7d48bbe dec82739-06
df (filtered): _________________________________________________________________
Avail Use% Mounted on
sda1 2.3G 89% /mnt/boot-sav/sda1
sda2 75.3M 25% /mnt/boot-sav/sda2
sda3 42.2G 72% /media/famillemorand/F424F4BE24F48540
sda5 173.2G 2% /media/famillemorand/D4CC2CC8CC2CA728
sda6 103G 6% /
Mount options: __________________________________________________________________
sda1 rw,relatime,user_id=0,group_id=0,allow_other,blksize=4096
sda2 rw,relatime,user_id=0,group_id=0,allow_other,blksize=4096
sda3 rw,nosuid,nodev,relatime,user_id=0,group_id=0,default_permissions,allow_other,blksize=4096
sda5 rw,nosuid,nodev,relatime,user_id=0,group_id=0,default_permissions,allow_other,blksize=4096
sda6 rw,relatime,errors=remount-ro
====================== sda6/boot/grub/grub.cfg (filtered) ======================
Ubuntu ec850f2b-d037-4cdf-8e72-51f5d7d48bbe
Ubuntu, avec Linux 5.4.0-26-generic ec850f2b-d037-4cdf-8e72-51f5d7d48bbe
### END /etc/grub.d/30_os-prober ###
### END /etc/grub.d/30_uefi-firmware ###
========================== sda6/etc/fstab (filtered) ===========================
# <file system> <mount point> <type> <options> <dump> <pass>
# / was on /dev/sda6 during installation
UUID=ec850f2b-d037-4cdf-8e72-51f5d7d48bbe / ext4 errors=remount-ro 0 1
/swapfile none swap sw 0 0
======================= sda6/etc/default/grub (filtered) =======================
GRUB_DEFAULT=0
GRUB_TIMEOUT_STYLE=hidden
GRUB_TIMEOUT=0
GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian`
GRUB_CMDLINE_LINUX_DEFAULT="quiet splash"
GRUB_CMDLINE_LINUX=""
==================== sda6: Location of files loaded by Grub ====================
GiB - GB File Fragment(s)
391,384059906 = 420,245434368 boot/grub/grub.cfg 2
375,420936584 = 403,105161216 boot/grub/i386-pc/core.img 1
351,527339935 = 377,449607168 boot/vmlinuz 2
351,527339935 = 377,449607168 boot/vmlinuz-5.4.0-26-generic 2
381,867183685 = 410,026766336 boot/initrd.img 3
381,867183685 = 410,026766336 boot/initrd.img-5.4.0-26-generic 3
381,867183685 = 410,026766336 boot/initrd.img.old 3
===================== sda6: ls -l /etc/grub.d/ (filtered) ======================
-rwxr-xr-x 1 root root 17123 Apr 15 14:31 10_linux
-rwxr-xr-x 1 root root 42128 Apr 15 14:31 10_linux_zfs
-rwxr-xr-x 1 root root 12894 Apr 15 14:31 20_linux_xen
-rwxr-xr-x 1 root root 12059 Apr 15 14:31 30_os-prober
-rwxr-xr-x 1 root root 1424 Apr 15 14:31 30_uefi-firmware
-rwxr-xr-x 1 root root 214 Apr 15 14:31 40_custom
-rwxr-xr-x 1 root root 216 Apr 15 14:31 41_custom
Suggested repair: ______________________________________________________________
The default repair of the Boot-Repair utility would reinstall the grub2 of
sda6 into the MBR of sda.
Additional repair would be performed: unhide-bootmenu-10s win-legacy-basic-fix
Conseils pour les nouveaux demandeurs et pas qu'eux
Important : Pensez à passer vos sujets en [Résolu] lorsque ceux-ci le sont, au début du titre en cliquant sur Modifier sous le premier message, et un bref récapitulatif de la solution à la fin de celui-ci. Merci. Membre de Linux-Azur
En ligne
#28 Le 04/06/2020, à 19:20
- moko138
Re : [Résolu] Passage a 20.04 rate a cause de coupure de courant
Bon bin j'ai pu l'installer et maintenant il fonctionne très bien, hélas je n'ai plus le choix de l'OS au démarrage
Merci de montrer
sudo os-prober ; echo; sudo update-grub
%NOINDEX%
Un utilitaire précieux : ncdu
Photo, mini-tutoriel : À la découverte de dcraw
Hors ligne
#29 Le 04/06/2020, à 19:58
- nisco
Re : [Résolu] Passage a 20.04 rate a cause de coupure de courant
nisco a écrit :Bon bin j'ai pu l'installer et maintenant il fonctionne très bien, hélas je n'ai plus le choix de l'OS au démarrage
Merci de montrer
sudo os-prober ; echo; sudo update-grub
Tip top, c'est parfait! Merci à tous pour votre aide très précise et claire! mon ordi repart comme en 40, c'est parfait!
Soyons réalistes, demandons l'impossible
Hors ligne