Ubuntu-fr

ljere

resolue probleme dualview depuis hardy

bonjour tout fonctionnait très bien depuis que j'ai installé la bêta de hardy mais ce week end j'ai voulu branché ma télé en dualview comme je le faisais auparavant avec gutsy, mais cela ne passe pas j'ai une nvidia fx 5200 mon fichier xorg n'a pas changé

# /etc/X11/xorg.conf (xorg X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the xorg.conf(5) manual page.
# (Type "man xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
#   sudo dpkg-reconfigure -phigh xserver-xorg

Section "Files"
	Fontpath	"/usr/share/fonts/X11/misc"
	Fontpath	"/usr/share/fonts/X11/cyrillic"
	Fontpath	"/usr/share/fonts/X11/100dpi/:unscaled"
	Fontpath	"/usr/share/fonts/X11/75dpi/:unscaled"
	Fontpath	"/usr/share/fonts/X11/Type1"
	Fontpath	"/usr/share/fonts/X11/100dpi"
	Fontpath	"/usr/share/fonts/X11/75dpi"
	# path to defoma fonts
	Fontpath	"/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
EndSection

Section "Module"
	Load		"i2c"
	Load		"bitmap"
	Load		"ddc"
	Load		"extmod"
	Load		"freetype"
	Load		"glx"
	Load		"int10"
	Load		"vbe"
EndSection

Section "ServerFlags"
	Option		"Xinerama" "1"
EndSection

Section "InputDevice"
	Identifier	"Generic Keyboard"
	Driver		"kbd"
	Option		"CoreKeyboard"
	Option		"XkbRules"	"xorg"
	Option		"XkbModel"	"pc105"
	Option		"XkbLayout"	"fr"
	Option		"XkbVariant"	"oss"
EndSection

Section "InputDevice"
	Identifier	"Configured Mouse"
	Driver		"mouse"
	Option		"CorePointer"
	Option		"Device"	"/dev/input/mice"
	Option		"Protocol"	"ImPS/2"
	Option		"ZAxisMapping"	"4 5"
	Option		"Emulate3Buttons"	"true"
EndSection

Section "InputDevice"
	Driver		"wacom"
	Identifier	"stylus"
	Option		"Device"	"/dev/wacom"# Change to 
	Option		"Type"	"stylus"
	Option		"ForceDevice"	"ISDV4"# Tablet PC ONLY
	# /dev/input/event
	# for USB
EndSection

Section "InputDevice"
	Driver		"wacom"
	Identifier	"eraser"
	Option		"Device"	"/dev/wacom"# Change to 
	Option		"Type"	"eraser"
	Option		"ForceDevice"	"ISDV4"# Tablet PC ONLY
	# /dev/input/event
	# for USB
EndSection

Section "InputDevice"
	Driver		"wacom"
	Identifier	"cursor"
	Option		"Device"	"/dev/wacom"# Change to 
	Option		"Type"	"cursor"
	Option		"ForceDevice"	"ISDV4"# Tablet PC ONLY
	# /dev/input/event
	# for USB
EndSection

Section "Device"
	Identifier     "Videocard0"
	Driver         "nvidia"
	VendorName     "NVIDIA Corporation"
	BoardName      "GeForce FX 5200"
	BusID          "PCI:1:0:0"
	Screen          0
	Option		"AddARGBVisuals"	"True"
	Option		"AddARGBGLXVisuals"	"True"
	Option		"TripleBuffer" "True"
	Option		"NoLogo"	"True"
EndSection

Section "Device"
	Identifier     "Videocard1"
	Driver         "nvidia"
	VendorName     "NVIDIA Corporation"
	BoardName      "GeForce FX 5200"
	BusID          "PCI:1:0:0"
	Screen          1
	Option		"NoLogo"	"True"
EndSection

Section "Monitor"
	# HorizSync source: edid, VertRefresh source: edid
	Identifier     "Monitor0"
	VendorName     "Unknown"
	ModelName      "Acer AL2202W"
	HorizSync       31.0 - 83.0
	VertRefresh     56.0 - 75.0
	Option         "DPMS"
EndSection

Section "Monitor"
	# HorizSync source: builtin, VertRefresh source: builtin
	Identifier     "Monitor1"
	VendorName     "Unknown"
	ModelName      "TV-0"
	HorizSync       28.0 - 33.0	
	VertRefresh     43.0 - 72.0
	Option         "DPMS"
EndSection

Section "Screen"
    Identifier     "Screen0"
    Device         "Videocard0"
    Monitor        "Monitor0"
    DefaultDepth    24
    Option         "metamodes" "CRT: 1680x1050 +0+0; CRT: 1152x864 +0+0; CRT: 1024x768 +0+0; CRT: 800x600 +0+0; CRT: 640x480 +0+0"
    SubSection     "Display"
        Depth       24
        Modes      "1600x1200" "1280x1024" "1024x768" "800x600" "640x480"
    EndSubSection
EndSection

Section "Screen"
    Identifier     "Screen1"
    Device         "Videocard1"
    Monitor        "Monitor1"
    DefaultDepth    24
    Option         "metamodes" "TV: nvidia-auto-select +0+0"
    SubSection     "Display"
        Depth       24
        Modes      "1600x1200" "1280x1024" "1024x768" "800x600" "640x480"
    EndSubSection
EndSection

Section "ServerLayout"
	Identifier	"Layout0"
	Screen	      	0  "Screen0" leftOf "Screen1"
	Screen	      	1  "Screen1" 1680 0
	Inputdevice	"Generic Keyboard"
	Inputdevice	"Configured Mouse"
	Inputdevice	"stylus"	"SendCoreEvents"
	Inputdevice	"cursor"	"SendCoreEvents"
	Inputdevice	"eraser"	"SendCoreEvents"
EndSection

Section "DRI"
	Mode	0666
EndSection

quand je redémarre la session j'ai mon ecran principale d'origine 1680*1050 qui passe a 800*600 j'ai des trait sur la télé tout en restant noir le clavier passe en qwerty c'est comme si il ne lisait plus mon xorg je ne sais pas quoi faire, merci de m'aider.

Dernière modification par ljere (Le 21/04/2008, à 19:03)

---

ancien PC Toshiba satellite_c670d-11 / Linux Mint 21 Vanessa
Nouveau PC ASUS TUF GAMING A17 GPU RTX 4070 CPU AMD Ryzen 9 7940HS w/ Radeon 780M Graphics / Linux Mint 21.2 Victoria / Kernel: 6.4.8-1-liquorix / Desktop: Cinnamon

dam

Re : resolue probleme dualview depuis hardy

J'ai eu également pas mal de problème avec le passage à Hardy au niveau des deux écrans.

Si ca peut t'aider je te met mon xorg.conf qui marche (avec une FX 5200 un écran en 1280*1024 et un autre en 1024*768). J'ai même activé compiz qui marche très bien

# nvidia-settings: X configuration file generated by nvidia-settings
# nvidia-settings:  version 1.0  (buildmeister@builder3)  Wed Sep 12 14:30:30 PDT 2007

# xorg.conf (xorg X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the xorg.conf manual page.
# (Type "man xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
#   sudo dpkg-reconfigure -phigh xserver-xorg

Section "ServerLayout"

	# Uncomment if you have a wacom tablet
	#	InputDevice     "stylus"	"SendCoreEvents"
	#	InputDevice     "cursor"	"SendCoreEvents"
	#	InputDevice     "eraser"	"SendCoreEvents"
    Identifier     "Default Layout"
    Screen      0  "Screen0" 0 0
    InputDevice    "Generic Keyboard"
    InputDevice    "Configured Mouse"
EndSection

Section "Files"
EndSection

Section "Module"
    Load           "glx"
    Load           "v4l"
EndSection

Section "ServerFlags"
# Removed Option "Xinerama" "true"
    Option         "Xinerama" "0"
EndSection

Section "InputDevice"
    Identifier     "Generic Keyboard"
    Driver         "kbd"
    Option         "CoreKeyboard"
    Option         "XkbRules" "xorg"
    Option         "XkbModel" "pc105"
    Option         "XkbLayout" "fr"
    Option         "XkbVariant" "oss"
    Option         "XkbOptions" "lv3:ralt_switch"
EndSection

Section "InputDevice"
    Identifier     "Configured Mouse"
    Driver         "mouse"
    Option         "Buttons" "7"
    Option         "CorePointer"
    Option         "Device" "/dev/input/mice"
    Option         "Protocol" "ExplorerPS/2"
    Option         "Emulate3Buttons" "false"
    Option         "ZAxisMapping" "4 5"
    Option         "ButtonMapping" "1 2 3 6 7"
EndSection

Section "Monitor"
    Identifier     "Écran générique"
    VendorName     "Generic LCD Display"
    ModelName      "LCD Panel 1280x1024"
    HorizSync       31.0 - 64.0
    VertRefresh     56.0 - 65.0
    Gamma           1
    ModeLine       "640x480@60" 25.0 640 656 752 800 480 490 492 525 -hsync -vsync
    ModeLine       "800x600@56" 36.0 800 824 896 1024 600 601 603 625 +hsync +vsync
    ModeLine       "800x600@60" 40.0 800 840 968 1056 600 601 605 628 +hsync +vsync
    ModeLine       "1024x768@60" 65.0 1024 1048 1184 1344 768 771 777 806 -hsync -vsync
    ModeLine       "1280x960@60" 102.0 1280 1360 1496 1712 960 961 964 994 -hsync +vsync
    ModeLine       "1280x1024@60" 108.0 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync
EndSection

Section "Monitor"
 #           
    Identifier     "monitor1"
    VendorName     "Hewlett-Packard"
    ModelName      "HP D2839 HP 70 17-inch Monitor"
    HorizSync       31.0 - 70.0
    VertRefresh     50.0 - 120.0
    Gamma           1
    ModeLine       "640x480@60" 25.0 640 656 752 800 480 490 492 525 -hsync -vsync
    ModeLine       "640x480@72" 31.0 640 664 704 832 480 489 491 520 -hsync -vsync
    ModeLine       "640x480@75" 31.0 640 656 720 840 480 481 484 500 -hsync -vsync
    ModeLine       "640x480@85" 36.0 640 696 752 832 480 481 484 509 -hsync -vsync
    ModeLine       "800x600@56" 36.0 800 824 896 1024 600 601 603 625 +hsync +vsync
    ModeLine       "800x600@72" 50.0 800 856 976 1040 600 637 643 666 +hsync +vsync
    ModeLine       "800x600@75" 49.0 800 816 896 1056 600 601 604 625 +hsync +vsync
    ModeLine       "800x600@85" 56.0 800 832 896 1048 600 601 604 631 +hsync +vsync
    ModeLine       "800x600@60" 40.0 800 840 968 1056 600 601 605 628 +hsync +vsync
    ModeLine       "832x624@75" 57.0 832 864 928 1152 624 625 628 667 -hsync -vsync
    ModeLine       "1024x768@85" 94.0 1024 1072 1168 1376 768 769 772 808 +hsync +vsync
    ModeLine       "1024x768@75" 78.0 1024 1040 1136 1312 768 769 772 800 +hsync +vsync
    ModeLine       "1024x768@70" 75.0 1024 1048 1184 1328 768 771 777 806 -hsync -vsync
    ModeLine       "1024x768@60" 65.0 1024 1048 1184 1344 768 771 777 806 -hsync -vsync
    ModeLine       "1024x768@43" 44.0 1024 1032 1208 1264 768 768 776 817 +hsync +vsync interlace
    ModeLine       "1152x864@75" 108.0 1152 1216 1344 1600 864 865 868 900 +hsync +vsync
    ModeLine       "1280x960@60" 102.0 1280 1360 1496 1712 960 961 964 994 -hsync +vsync
    ModeLine       "1280x1024@60" 108.0 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync
    ModeLine       "1400x1050@60" 122.0 1400 1488 1640 1880 1050 1051 1054 1087 -hsync +vsync
EndSection

Section "Monitor"
    Identifier     "Monitor0"
    VendorName     "Unknown"
    ModelName      "Philips 190V"
    HorizSync       30.0 - 83.0
    VertRefresh     56.0 - 76.0
EndSection

Section "Device"
    Identifier     "nVidia Corporation NV34 [GeForce FX 5200]"
    Driver         "nvidia"
    BoardName      "nv"
    BusID          "PCI:3:0:0"
    Screen          0
EndSection

Section "Device"
 #           
    Identifier     "device1"
    Driver         "nvidia"
    BoardName      "nv"
    BusID          "PCI:3:0:0"
    Screen          1
EndSection

Section "Device"
    Identifier     "Videocard0"
    Driver         "nvidia"
    VendorName     "NVIDIA Corporation"
    BoardName      "GeForce FX 5200"
EndSection

Section "Screen"
    Identifier     "Default Screen"
    Device         "nVidia Corporation NV34 [GeForce FX 5200]"
    Monitor        "Écran générique"
    DefaultDepth    24
    SubSection     "Display"
        Virtual     1280 1024
        Depth       24
        Modes      "1280x1024@60" "1280x960@60" "1024x768@60" "800x600@60" "800x600@56" "640x480@60"
    EndSubSection
EndSection

Section "Screen"
 #           
    Identifier     "screen1"
    Device         "device1"
    Monitor        "monitor1"
    DefaultDepth    24
    SubSection     "Display"
        Depth       24
        Modes      "1024x768@43" "1152x864@75" "1024x768@60" "1280x960@60" "1024x768@70" "1280x1024@60" "1024x768@75" "1400x1050@60" "1024x768@85" "832x624@75" "800x600@60" "800x600@85" "800x600@75" "800x600@72" "800x600@56" "640x480@85" "640x480@75" "640x480@72" "640x480@60"
    EndSubSection
EndSection

Section "Screen"
    Identifier     "Screen0"
    Device         "Videocard0"
    Monitor        "Monitor0"
    DefaultDepth    24
    Option         "TwinView" "1"
    Option         "metamodes" "CRT: 1280x1024@60 +0+0, DFP: 1024x768@60 +1280+0; CRT: 1280x960@60 +0+0, DFP: 800x600@60 +1280+0; CRT: 1024x768@60 +0+0, DFP: 640x480@60 +1280+0; CRT: 800x600@60 +0+0; CRT: 800x600@56 +0+0; CRT: 640x480@60 +0+0"
EndSection

---

http://linuxandco.free.fr/

ljere

Re : resolue probleme dualview depuis hardy

merci je test de suite.

---

ancien PC Toshiba satellite_c670d-11 / Linux Mint 21 Vanessa
Nouveau PC ASUS TUF GAMING A17 GPU RTX 4070 CPU AMD Ryzen 9 7940HS w/ Radeon 780M Graphics / Linux Mint 21.2 Victoria / Kernel: 6.4.8-1-liquorix / Desktop: Cinnamon

Flblbl

Re : resolue probleme dualview depuis hardy

ça serait pas l'option xinerama qui ferait merder?
J'ai jamais réussi à faire fonctionner cette option

ljere

Re : resolue probleme dualview depuis hardy

alors j'ai essayé ton fichier qui ne marche pas du tout non plus, j'essaie de le modifié un mixe du mien et du tien ca marche pas, j'abandonne remet l'original qui n'a pas voulu marché ce week end, reboot session et la ça marche je ne comprend plus rien mais ça marche merci encore de votre aide.

---

ancien PC Toshiba satellite_c670d-11 / Linux Mint 21 Vanessa
Nouveau PC ASUS TUF GAMING A17 GPU RTX 4070 CPU AMD Ryzen 9 7940HS w/ Radeon 780M Graphics / Linux Mint 21.2 Victoria / Kernel: 6.4.8-1-liquorix / Desktop: Cinnamon