Contenu | Rechercher | Menus

Annonce

Si vous avez des soucis pour rester connecté, déconnectez-vous puis reconnectez-vous depuis ce lien en cochant la case
Me connecter automatiquement lors de mes prochaines visites.

À propos de l'équipe du forum.

#1 Le 26/05/2008, à 19:19

Socrates

fonction scanneur "perfection 1250" & Xcane

Salut,
Xsane à bien détecté mon scanneur (trop vieux sans doute) mais ne se lance pas bien et les touches d'application directes (du scanneur) ne fonctionne pas; je vois sur le site epson (mais j'y crois pas trop sinon si vs avez une solution...:/
a+
Socates


MSI CR700~ubuntu 10.04LTS \n\l (x86_64 GNU/Linux) / Pentium(R) Dual-core T4500 @ 2.30 GHZ

Hors ligne

#2 Le 26/05/2008, à 19:35

azimuth024

Re : fonction scanneur "perfection 1250" & Xcane

Si c'est un scanner USB, branche-le et retourne le résultat de

lsusb

Hors ligne

#3 Le 26/05/2008, à 22:21

Socrates

Re : fonction scanneur "perfection 1250" & Xcane

Ok, mais je ne sais pas comment faire, j'essaie dans le terminal?
j'ai trouvé ce doc chez epson:http://www.avasys.jp/lx-bin2/linux_e/scan/DL1.do
Mais j'y pige que dale!


MSI CR700~ubuntu 10.04LTS \n\l (x86_64 GNU/Linux) / Pentium(R) Dual-core T4500 @ 2.30 GHZ

Hors ligne

#4 Le 27/05/2008, à 09:39

azimuth024

Re : fonction scanneur "perfection 1250" & Xcane

Socrates a écrit :

Ok, mais je ne sais pas comment faire, j'essaie dans le terminal?

Oui

Hors ligne

#5 Le 27/05/2008, à 16:44

tux4fun

Re : fonction scanneur "perfection 1250" & Xcane

Installe iscan_2.10.0-1.tar.gz,ici: http://lx1.avasys.jp/iscan/2.10.0/iscan_2.10.0-1.tar.gz
et lis le README:
contenu:
"Image Scan! for Linux Description

Copyright (C) 2004--2007  SEIKO EPSON Corporation


Contents
1   Preamble
2   Version Up Record  --> moved to NEWS file
3   Operating Condition
4   Installation Method
5   Running the Software
6   Options
7   Limitations
8   Known problems


1  Preamble

During our contact with the Free Software Foundation to straighten out
the licensing problems with "Image Scan! for Linux" we noticed that we
needed to clear up what parts are distributed under which conditions.
Here is an attempt.

"Image Scan! for Linux" contains the following parts:

  iscan            the program you use to scan your images
  libsane-epkowa    an improved driver for EPSON scanners
  libesmod        a proprietary module used by iscan

The latter module is provided (in object code form only) under the
terms of the license agreement provided in `non-free/EAPL.en.txt'.
The module is linked against libraries from the `glibc' package
which is covered by the GNU Lesser General Public License.

The `iscan' program is covered by the GNU General Public License with
a special exception that allows linking with the `libesmod' module.

The libsane-epkowa driver is released under the same conditions as
the SANE backends, that is under the GNU General Public License with a
special exception that allows linking a SANE library with other files
to produce an executable.

Unless explicitly noted otherwise in the file itself, all other files
in the non-free/ directory are copyright SEIKO EPSON Corporation and
distributed under the terms of the EPSON AVASYS Public License (see
non-free/EAPL.en.txt).

Copies of the GNU General Public License and the GNU Lesser General
Public License can be found in the files `COPYING' and `COPYING.LIB',
respectively.

The `iscan' program supports the following scanners:

            Seiko Epson Flatbed Scanner
            - Perfection 610
            - Perfection 640U
            - Perfection 1200S/Perfection 1200U/Perfection 1200U PHOTO
            - Perfection 1240U
            - Perfection 1660 PHOTO
            - Perfection 1640SU/Perfection 1640SU PHOTO
            - Perfection 1650/Perfection 1650 PHOTO
            - Perfection 2400 PHOTO
            - Perfection 2450 PHOTO
            - Perfection 3200 PHOTO
            - Perfection 4870 PHOTO
            - Perfection 4990 PHOTO
            - Perfection V700
            - Perfection V750
            - Expression 1600
            - Expression 1680
            - Expression 1640XL
            - Expression 10000XL
            - GT-2500
            - GT-10000/GT-10000+
            - GT-15000
            - GT-30000
            - ME200
            - Stylus CX2800/Stylus CX2900
            - Stylus CX3500/Stylus CX3600
            - Stylus CX3700/Stylus CX3800/Stylus DX3800
            - Stylus CX3900/Stylus DX4000
            - Stylus CX4100/Stylus CX4200/Stylus DX4200
            - Stylus CX4500/Stylus CX4600
            - Stylus CX4700/Stylus CX4800/Stylus DX4800
            - Stylus CX4900/Stylus CX5000/Stylus DX5000
            - Stylus CX5100/Stylus CX5200
            - Stylus CX5300/Stylus CX5400
            - Stylus CX5900/Stylus CX6000/Stylus DX6000
            - Stylus CX6300/Stylus CX6400
            - Stylus CX6500/Stylus CX6600
            - Stylus CX7300/Stylus CX7400/Stylus DX7400
            - Stylus CX7700/Stylus CX7800
            - Stylus CX8300/Stylus CX8400/Stylus DX8400
            - Stylus CX9300F/Stylus CX9400Fax/Stylus DX9400F
            - Stylus Photo RX420/Stylus Photo RX425/Stylus Photo RX430
            - Stylus Photo RX500/Stylus Photo RX510
            - Stylus Photo RX520/Stylus Photo RX530
            - Stylus Photo RX560/Stylus Photo RX580/Stylus Photo RX590
            - Stylus Photo RX600
            - Stylus Photo RX620/Stylus Photo RX630
            - Stylus Photo RX640/Stylus Photo RX650
            - Stylus Photo RX700
            - Stylus Photo RX585/Stylus Photo RX595/Stylus Photo RX610
            - Stylus Photo RX680/Stylus Photo RX685/Stylus Photo RX690
            - AcuLaser CX11
            - AcuLaser CX21

A number of non-free plugins are available separately that provide
support for the following scanners:

            - Perfection 1250/Perfection 1250 PHOTO
            - Perfection 1260/Perfection 1260 PHOTO
            - Perfection 2480 PHOTO
            - Perfection 2580 PHOTO
            - Perfection 3170 PHOTO
            - Perfection 3490 PHOTO
            - Perfection 3590 PHOTO
            - Perfection 4180 PHOTO
            - Perfection 4490 PHOTO
            - Perfection V10
            - Perfection V100 PHOTO
            - Perfection V200 PHOTO
            - Perfection V350 PHOTO
            - Stylus CX4300/CX4400/CX5500/CX5600/DX4400

The required modules can be downloaded via:

  http://www.avasys.jp/english/linux_e/index.html


2  Version Up Record

   [moved to NEWS file]


3  Operating Condition

- Kernel 2.4.3 or later is required when connecting your scanner by USB.
- Kernel 2.4.8 or later is required when connecting Perfection 1250/
  Perfection 1250 PHOTO and Perfection 1260/Perfection 1260 PHOTO.
- The hard disk requires at least double size of an image data size to
  be scanned.


4  Installation Method

It is required that the following packages are installed previous to
the installation of Image Scan! for Linux.
- sane-backends

4-1  Installing a rpm file

NOTE: The RPMs provided by EPSON AVASYS Corporation have been built on
      RedHat 9 with gimp-devel from RHEL4 added for GIMP2 support.

Execute the following rpm command to complete the installation.

  # rpm -i iscan-${version}-${release}.i386.rpm

where you should substitute the version of your Image Scan! for Linux
for ${version}-${release}.  So, if you downloaded iscan-1.5.1-5, then
the ${version} part would be 1.5.1 and the ${release} part would be 5.

Depending on the distribution, dependency errors may occur.
Running the following command will suppress dependency checks,
and complete the installation.

  # rpm -i --nodeps iscan-${version}-${release}.i386.rpm

If an old version of Image Scan! for Linux  exists,
run the following command and update to the latest version.

  # rpm -U iscan-${version}-${release}.i386.rpm

Note that the installation of Image Scan! for Linux from rpm requires
that sane has been installed from rpm as well.

4-2  Installing a tar file

Execute the following command to complete the installation.

  # tar -zxvf iscan-${version}-${release}.tar.gz
  # cd iscan-${version}
  # ./configure
  # make
  # make install

Note that the installation of Image Scan! for Linux from tar requires
that sane has been installed from tar as well.


5  Running the Software

At the command prompt, execute the following command to
start Image Scan! for Linux.

  $ iscan


6  Options

Normally, installating a binary package will register iscan as a GIMP
plugin.  In case this did not happen, or you compiled and installed
iscan from source, you can register it as a plugin yourself with the
following command:

  $ ln -s /usr/bin/iscan ~/.gimp-1.2/plug-ins/

Adjust the version number to match the version of the GIMP that you
use (and /usr/bin to wherever iscan was installed).  If you want to
make it available system wide, you can do that with:

  # ln -s /usr/bin/iscan `gimptool --gimpplugindir`/plug-ins/

If the GIMP complains something like

  duplicate plug-in: "/usr/lib/gimp/1.2/plug-ins/iscan"

Just remove ~/.gimp-1.2/plug-ins/iscan and all should be fine.

In order to print from directly from Image Scan! for Linux, your print
system needs to be able to handle the PNG file format directly.  CUPS
does this by default.  Furthermore, Photo Image Print System, versions
1.3.1 and later, will also work out of the box.

The latest version of Photo Image Print System can be downloaded via:

  http://www.avasys.jp/english/linux_e/


7  Limitations

All models
  - marquee sizes can only be set at multiples of 8 (in rare cases 32)

Perfection 2480 PHOTO / Perfection 3490 PHOTO
  - the multi photo feeder (MPF) option is not supported

Perfection 2580 PHOTO / Perfection 3590 PHOTO
  - only scanning from the flatbed is supported
  - the multi photo feeder (MPF) option is not supported

Perfection V350 PHOTO
  - the auto film loader (AFL) option is not supported


8 Known problems

======================================================================
- A printer configuration dialog keeps appearing after every single
   scan action.
----------------------------------------------------------------------
+ This has been confirmed on FC6 and you can fix the problem with an
   upgrade of the `hal-cups-utils` package.  Version 0.6.9-1.fc6 has
   been confirmed to solve it.
   You will need to configure the printer part of the device to use a
   HAL device URI, that is, something that starts with `hal:///` (of
   course without the quotes), via the CUPS web interface or Fedora's
   `system-config-printer` utility.  If you can configure the printer
   via the `Specify Printer Driver` dialog, that should also work and
   is probably easier for most.
======================================================================"


tux4fun
http://linuxcounter.net/ - http://frederick.varin.free.fr
Linux Registered User     #363458
Machine Registered     #261921

Hors ligne

#6 Le 30/05/2008, à 11:21

Socrates

Re : fonction scanneur "perfection 1250" & Xcane

tux4fun a écrit :

Installe iscan_2.10.0-1.tar.gz,ici: http://lx1.avasys.jp/iscan/2.10.0/iscan_2.10.0-1.tar.gz
et lis le README:
contenu:
"Image Scan! for Linux Description

Copyright (C) 2004--2007  SEIKO EPSON Corporation


Contents
1   Preamble
2   Version Up Record  --> moved to NEWS file
3   Operating Condition
4   Installation Method
5   Running the Software
6   Options
7   Limitations
8   Known problems


1  Preamble

During our contact with the Free Software Foundation to straighten out
the licensing problems with "Image Scan! for Linux" we noticed that we
needed to clear up what parts are distributed under which conditions.
Here is an attempt.

"Image Scan! for Linux" contains the following parts:

  iscan            the program you use to scan your images
  libsane-epkowa    an improved driver for EPSON scanners
  libesmod        a proprietary module used by iscan

The latter module is provided (in object code form only) under the
terms of the license agreement provided in `non-free/EAPL.en.txt'.
The module is linked against libraries from the `glibc' package
which is covered by the GNU Lesser General Public License.

The `iscan' program is covered by the GNU General Public License with
a special exception that allows linking with the `libesmod' module.

The libsane-epkowa driver is released under the same conditions as
the SANE backends, that is under the GNU General Public License with a
special exception that allows linking a SANE library with other files
to produce an executable.

Unless explicitly noted otherwise in the file itself, all other files
in the non-free/ directory are copyright SEIKO EPSON Corporation and
distributed under the terms of the EPSON AVASYS Public License (see
non-free/EAPL.en.txt).

Copies of the GNU General Public License and the GNU Lesser General
Public License can be found in the files `COPYING' and `COPYING.LIB',
respectively.

The `iscan' program supports the following scanners:

            Seiko Epson Flatbed Scanner
            - Perfection 610
            - Perfection 640U
            - Perfection 1200S/Perfection 1200U/Perfection 1200U PHOTO
            - Perfection 1240U
            - Perfection 1660 PHOTO
            - Perfection 1640SU/Perfection 1640SU PHOTO
            - Perfection 1650/Perfection 1650 PHOTO
            - Perfection 2400 PHOTO
            - Perfection 2450 PHOTO
            - Perfection 3200 PHOTO
            - Perfection 4870 PHOTO
            - Perfection 4990 PHOTO
            - Perfection V700
            - Perfection V750
            - Expression 1600
            - Expression 1680
            - Expression 1640XL
            - Expression 10000XL
            - GT-2500
            - GT-10000/GT-10000+
            - GT-15000
            - GT-30000
            - ME200
            - Stylus CX2800/Stylus CX2900
            - Stylus CX3500/Stylus CX3600
            - Stylus CX3700/Stylus CX3800/Stylus DX3800
            - Stylus CX3900/Stylus DX4000
            - Stylus CX4100/Stylus CX4200/Stylus DX4200
            - Stylus CX4500/Stylus CX4600
            - Stylus CX4700/Stylus CX4800/Stylus DX4800
            - Stylus CX4900/Stylus CX5000/Stylus DX5000
            - Stylus CX5100/Stylus CX5200
            - Stylus CX5300/Stylus CX5400
            - Stylus CX5900/Stylus CX6000/Stylus DX6000
            - Stylus CX6300/Stylus CX6400
            - Stylus CX6500/Stylus CX6600
            - Stylus CX7300/Stylus CX7400/Stylus DX7400
            - Stylus CX7700/Stylus CX7800
            - Stylus CX8300/Stylus CX8400/Stylus DX8400
            - Stylus CX9300F/Stylus CX9400Fax/Stylus DX9400F
            - Stylus Photo RX420/Stylus Photo RX425/Stylus Photo RX430
            - Stylus Photo RX500/Stylus Photo RX510
            - Stylus Photo RX520/Stylus Photo RX530
            - Stylus Photo RX560/Stylus Photo RX580/Stylus Photo RX590
            - Stylus Photo RX600
            - Stylus Photo RX620/Stylus Photo RX630
            - Stylus Photo RX640/Stylus Photo RX650
            - Stylus Photo RX700
            - Stylus Photo RX585/Stylus Photo RX595/Stylus Photo RX610
            - Stylus Photo RX680/Stylus Photo RX685/Stylus Photo RX690
            - AcuLaser CX11
            - AcuLaser CX21

A number of non-free plugins are available separately that provide
support for the following scanners:

            - Perfection 1250/Perfection 1250 PHOTO
            - Perfection 1260/Perfection 1260 PHOTO
            - Perfection 2480 PHOTO
            - Perfection 2580 PHOTO
            - Perfection 3170 PHOTO
            - Perfection 3490 PHOTO
            - Perfection 3590 PHOTO
            - Perfection 4180 PHOTO
            - Perfection 4490 PHOTO
            - Perfection V10
            - Perfection V100 PHOTO
            - Perfection V200 PHOTO
            - Perfection V350 PHOTO
            - Stylus CX4300/CX4400/CX5500/CX5600/DX4400

The required modules can be downloaded via:

  http://www.avasys.jp/english/linux_e/index.html


2  Version Up Record

   [moved to NEWS file]


3  Operating Condition

- Kernel 2.4.3 or later is required when connecting your scanner by USB.
- Kernel 2.4.8 or later is required when connecting Perfection 1250/
  Perfection 1250 PHOTO and Perfection 1260/Perfection 1260 PHOTO.
- The hard disk requires at least double size of an image data size to
  be scanned.


4  Installation Method

It is required that the following packages are installed previous to
the installation of Image Scan! for Linux.
- sane-backends

4-1  Installing a rpm file

NOTE: The RPMs provided by EPSON AVASYS Corporation have been built on
      RedHat 9 with gimp-devel from RHEL4 added for GIMP2 support.

Execute the following rpm command to complete the installation.

  # rpm -i iscan-${version}-${release}.i386.rpm

where you should substitute the version of your Image Scan! for Linux
for ${version}-${release}.  So, if you downloaded iscan-1.5.1-5, then
the ${version} part would be 1.5.1 and the ${release} part would be 5.

Depending on the distribution, dependency errors may occur.
Running the following command will suppress dependency checks,
and complete the installation.

  # rpm -i --nodeps iscan-${version}-${release}.i386.rpm

If an old version of Image Scan! for Linux  exists,
run the following command and update to the latest version.

  # rpm -U iscan-${version}-${release}.i386.rpm

Note that the installation of Image Scan! for Linux from rpm requires
that sane has been installed from rpm as well.

4-2  Installing a tar file

Execute the following command to complete the installation.

  # tar -zxvf iscan-${version}-${release}.tar.gz
  # cd iscan-${version}
  # ./configure
  # make
  # make install

Note that the installation of Image Scan! for Linux from tar requires
that sane has been installed from tar as well.


5  Running the Software

At the command prompt, execute the following command to
start Image Scan! for Linux.

  $ iscan


6  Options

Normally, installating a binary package will register iscan as a GIMP
plugin.  In case this did not happen, or you compiled and installed
iscan from source, you can register it as a plugin yourself with the
following command:

  $ ln -s /usr/bin/iscan ~/.gimp-1.2/plug-ins/

Adjust the version number to match the version of the GIMP that you
use (and /usr/bin to wherever iscan was installed).  If you want to
make it available system wide, you can do that with:

  # ln -s /usr/bin/iscan `gimptool --gimpplugindir`/plug-ins/

If the GIMP complains something like

  duplicate plug-in: "/usr/lib/gimp/1.2/plug-ins/iscan"

Just remove ~/.gimp-1.2/plug-ins/iscan and all should be fine.

In order to print from directly from Image Scan! for Linux, your print
system needs to be able to handle the PNG file format directly.  CUPS
does this by default.  Furthermore, Photo Image Print System, versions
1.3.1 and later, will also work out of the box.

The latest version of Photo Image Print System can be downloaded via:

  http://www.avasys.jp/english/linux_e/


7  Limitations

All models
  - marquee sizes can only be set at multiples of 8 (in rare cases 32)

Perfection 2480 PHOTO / Perfection 3490 PHOTO
  - the multi photo feeder (MPF) option is not supported

Perfection 2580 PHOTO / Perfection 3590 PHOTO
  - only scanning from the flatbed is supported
  - the multi photo feeder (MPF) option is not supported

Perfection V350 PHOTO
  - the auto film loader (AFL) option is not supported


8 Known problems

======================================================================
- A printer configuration dialog keeps appearing after every single
   scan action.
----------------------------------------------------------------------
+ This has been confirmed on FC6 and you can fix the problem with an
   upgrade of the `hal-cups-utils` package.  Version 0.6.9-1.fc6 has
   been confirmed to solve it.
   You will need to configure the printer part of the device to use a
   HAL device URI, that is, something that starts with `hal:///` (of
   course without the quotes), via the CUPS web interface or Fedora's
   `system-config-printer` utility.  If you can configure the printer
   via the `Specify Printer Driver` dialog, that should also work and
   is probably easier for most.
======================================================================"

Bien,
j'ai fait mes premiers pas dans le générateur de commandes (je rappel que je suis sous la version 8.04) pour pouvoir installer libbeecrypt6 libbrrmp4.4 rpm afin de lire tous les fichiers ".rpm"je pense que ça sert à ça, et téléchargé le logiciel iscan-2.10.0.1.c2.i386.rpm sur le bureau;par contre je n'arrive pas à l'installer; l'outil Gdebi ne s'ouvre pas (il est pourtant bien actif dans le gestionnaire de paquets).
Que me conseillez vous?


MSI CR700~ubuntu 10.04LTS \n\l (x86_64 GNU/Linux) / Pentium(R) Dual-core T4500 @ 2.30 GHZ

Hors ligne

#7 Le 30/05/2008, à 16:41

tux4fun

Re : fonction scanneur "perfection 1250" & Xcane

Bonjour,
Il faut convertir les *.rpm ("package manager" différent) en *.deb, ceci implique un recour à alien, Gdebi ne sait pas gérer ce type de paquet (normal):
sudo apt-get install alien

Puis télécharger les 2 fichiers suivants:
http://lx1.avasys.jp/iscan/2.10.0/iscan-2.10.0-1.c2.i386.rpm
http://lx1.avasys.jp/iscan/v1180/iscan-plugin-gt-7200-1.0.0-1.c2.i386.rpm  (même plugin pour 1250 et 1250PHOTO)

Procéder comme mentionné ici:
http://morgajel.net/2007/09/

Espérant que cela aide, dommage qu'il ne soit pas packagé .deb sad


tux4fun
http://linuxcounter.net/ - http://frederick.varin.free.fr
Linux Registered User     #363458
Machine Registered     #261921

Hors ligne

#8 Le 31/05/2008, à 06:27

Socrates

Re : fonction scanneur "perfection 1250" & Xcane

tux4fun a écrit :

Bonjour,
Il faut convertir les *.rpm ("package manager" différent) en *.deb, ceci implique un recour à alien, Gdebi ne sait pas gérer ce type de paquet (normal):
sudo apt-get install alien

Puis télécharger les 2 fichiers suivants:
http://lx1.avasys.jp/iscan/2.10.0/iscan-2.10.0-1.c2.i386.rpm
http://lx1.avasys.jp/iscan/v1180/iscan-plugin-gt-7200-1.0.0-1.c2.i386.rpm  (même plugin pour 1250 et 1250PHOTO)

Procéder comme mentionné ici:
http://morgajel.net/2007/09/

Espérant que cela aide, dommage qu'il ne soit pas packagé .deb sad

j'ai fait ds le terminal l'install d'alien et le déroulement avait l'air de bien fonctionné au final j'ai ceci:
Processing triggers for libc6 ...
ldconfig deferred processing now taking place
en traduction pure cela veut dire que c'est reporté et que ça a eu lieu
que doit-je en déduire?


MSI CR700~ubuntu 10.04LTS \n\l (x86_64 GNU/Linux) / Pentium(R) Dual-core T4500 @ 2.30 GHZ

Hors ligne

#9 Le 31/05/2008, à 10:02

tux4fun

Re : fonction scanneur "perfection 1250" & Xcane

Rien de spécial, tu peux vérifier ceci ici:
https://lists.ubuntu.com/archives/ubuntu-devel-discuss/2007-October/001852.html
(ma parole n'est pas d'or).
Tous ce déroule normalement (ldconfig se lance), as tu été au terme de l'installation (http://morgajel.net/2007/09/) ?

Dernière modification par tux4fun (Le 31/05/2008, à 10:02)


tux4fun
http://linuxcounter.net/ - http://frederick.varin.free.fr
Linux Registered User     #363458
Machine Registered     #261921

Hors ligne

#10 Le 31/05/2008, à 10:47

Socrates

Re : fonction scanneur "perfection 1250" & Xcane

tux4fun a écrit :

Rien de spécial, tu peux vérifier ceci ici:
https://lists.ubuntu.com/archives/ubuntu-devel-discuss/2007-October/001852.html
(ma parole n'est pas d'or).
Tous ce déroule normalement (ldconfig se lance), as tu été au terme de l'installation (http://morgajel.net/2007/09/) ?

je m'excuse mais la ça dépasse mes compétences, je n'y comprends rien c'est quoi les sites?


MSI CR700~ubuntu 10.04LTS \n\l (x86_64 GNU/Linux) / Pentium(R) Dual-core T4500 @ 2.30 GHZ

Hors ligne

#11 Le 31/05/2008, à 13:10

tux4fun

Re : fonction scanneur "perfection 1250" & Xcane

Le premier confirme, que ldconfig se lance, le second décrit la procédure pour installer les paquets *.rpm avec l'usage d'alien, ainsi que les modifs à effectuer à:
/etc/sane.d/dll.conf,.......rappel que l'utilisateur doit également appartenir au groupe scanner..;


tux4fun
http://linuxcounter.net/ - http://frederick.varin.free.fr
Linux Registered User     #363458
Machine Registered     #261921

Hors ligne

#12 Le 31/05/2008, à 17:40

Socrates

Re : fonction scanneur "perfection 1250" & Xcane

tux4fun a écrit :

Le premier confirme, que ldconfig se lance, le second décrit la procédure pour installer les paquets *.rpm avec l'usage d'alien, ainsi que les modifs à effectuer à:
/etc/sane.d/dll.conf,.......rappel que l'utilisateur doit également appartenir au groupe scanner..;

Ok ok, je prends 3 dolipranes et je reviens ce soir ou demain, mais je n'abandonne pas...
encore merci
ah oui déteil tout de même important je suis nul en anglais...mais j'utilise le traducteur.


MSI CR700~ubuntu 10.04LTS \n\l (x86_64 GNU/Linux) / Pentium(R) Dual-core T4500 @ 2.30 GHZ

Hors ligne

#13 Le 01/06/2008, à 15:22

tijean97427

Re : fonction scanneur "perfection 1250" & Xcane

Je voudrais faire part de mon expérience personnelle(c'est ma première intervention sur ce forum).javascript:insert_text(':cool:',%20'');

je suis sous Hardy Heron 8.04: j'ai moi aussi un scanner Epson  Perfection 1250.Il ne fonctionnait pas lors de ma mise à jour depuis Gutsy.

Après quelque réglages  assez aléatoires (j'ai tenté en vain d'utiliser le tuto de la documentation sur les scanners  Epson (passage par le site Avasys , téléchargement d'iscan et iscan plugin correspondant au modèle 1250 Perfection , transformation des fichiers  .rpm en fichiers .deb grâce à Alien), j'ai dû me rendre à l'évidence :  impossible de transformer le fichier  iscan plugin en fichier .deb .

Et puis ce matin, miracle ! Comme je suis un têtu, j'ai tenté une nième fois de brancher mon (vieux) scanner , et cette fois c'était la bonne !javascript:insert_text(':D',%20'');

Ne me demandez pas pourquoi ça a marché : je n'en sais rien. Une chose est sûre: je n'ai pas utilisé les fichiers iscan et mon ordi a reconnu automatiquement le scanner (plustek et non epkowa). Il m'a suffi de patienter quelques secondes (mais pas plus longtemps que sur windows XP) et tout a marché comme sur des roulettes.

Est- ce dû aux remises à jour système que je fais régulièrement depuis Hardy Heron ?...

Dernière modification par tijean97427 (Le 01/06/2008, à 15:28)

Hors ligne

#14 Le 01/06/2008, à 17:07

Socrates

Re : fonction scanneur "perfection 1250" & Xcane

azimuth024 a écrit :
Socrates a écrit :

Ok, mais je ne sais pas comment faire, j'essaie dans le terminal?

Oui

voici la réponse du sudo:
              desktop:~$ sudo lsusb
[sudo] password :
Bus 002 Device 001: ID 0000:0000 
Bus 001 Device 003: ID 04b8:010f Seiko Epson Corp. Perfection 1250
Bus 001 Device 002: ID 03f0:3e02 Hewlett-Packard
Bus 001 Device 001: ID 0000:0000 
             desktop:~$
je tenais à essayer ta proposition et de reprendre la proposition de "tux4fun"; le scann ne fonctionne toujours pas bien; 1/4 de l'image retenue et les autres fonctions ne fonctionnent pas du tout.
Gracias


MSI CR700~ubuntu 10.04LTS \n\l (x86_64 GNU/Linux) / Pentium(R) Dual-core T4500 @ 2.30 GHZ

Hors ligne

#15 Le 02/06/2008, à 06:27

Socrates

Re : fonction scanneur "perfection 1250" & Xcane

tijean97427 a écrit :

Je voudrais faire part de mon expérience personnelle(c'est ma première intervention sur ce forum).javascript:insert_text(':cool:',%20'');

je suis sous Hardy Heron 8.04: j'ai moi aussi un scanner Epson  Perfection 1250.Il ne fonctionnait pas lors de ma mise à jour depuis Gutsy.

Après quelque réglages  assez aléatoires (j'ai tenté en vain d'utiliser le tuto de la documentation sur les scanners  Epson (passage par le site Avasys , téléchargement d'iscan et iscan plugin correspondant au modèle 1250 Perfection , transformation des fichiers  .rpm en fichiers .deb grâce à Alien), j'ai dû me rendre à l'évidence :  impossible de transformer le fichier  iscan plugin en fichier .deb .

Et puis ce matin, miracle ! Comme je suis un têtu, j'ai tenté une nième fois de brancher mon (vieux) scanner , et cette fois c'était la bonne !javascript:insert_text(':D',%20'');

Ne me demandez pas pourquoi ça a marché : je n'en sais rien. Une chose est sûre: je n'ai pas utilisé les fichiers iscan et mon ordi a reconnu automatiquement le scanner (plustek et non epkowa). Il m'a suffi de patienter quelques secondes (mais pas plus longtemps que sur windows XP) et tout a marché comme sur des roulettes.

Est- ce dû aux remises à jour système que je fais régulièrement depuis Hardy Heron ?...

Salut,
je n'arrive toujours pas à installer les fichiers avec alien, en fait, je ne sait pas comment l'utiliser. Je l'ai pourtant bien installé (voir messages précédents); comment a tu procédé?


MSI CR700~ubuntu 10.04LTS \n\l (x86_64 GNU/Linux) / Pentium(R) Dual-core T4500 @ 2.30 GHZ

Hors ligne

#16 Le 02/06/2008, à 14:51

tijean97427

Re : fonction scanneur "perfection 1250" & Xcane

En fait , je N'AI PAS UTILISE ALIEN .

J'avais réussi à "aliéniser" et à  installer l'un des fichiers iscan (mais pas le iscan plugin) . Mais je l'ai ensuite désinstallé : supprimé  iscan dans le gestionnaire de paquets !
 
Après réflexion, je pense que mon scanner fonctionnait depuis le départ sans iscan : la preuve , actuellement, il démarre automatiquement  avec Xsane : pour moi le tuto sur les scanners Epson est inutile et m'a induit en erreur.

En fait, au début, je n'attendais sans doute pas suffisamment longtemps pour faire "chauffer"  le moteur du scanner.Du coup , j'arrêtais à chaque fois le processus sans attendre le démarrage qui était pourtant imminent ! Et c'est seulement maintenant que je viens de m'en rendre compte ! (Quel c... !)

En  ce qui me concerne , les choses sont claires : XSANE utilise  correctement le Perfection 1250 sous   HARDY HERON et surtout sans iscan : TOUT EST AUTOMATIQUE ET NICKEL .

Pour moi (bien évidemment cela est lié à ma propre configuration matérielle) , le tuto est obsolète concernant le Epson 1250 .

Hors ligne

#17 Le 08/06/2008, à 20:45

Socrates

Re : fonction scanneur "perfection 1250" & Xcane

[résolu]
Visite à l'install party à la cité des sciences à Paris
effectivement, il faut lancer Alien dans le terminal et convertir le fameux fichier iscan-2.10.0 en .deb
lancer la commande d'installation du paquet
lancer xsane
Et merci Paul!


MSI CR700~ubuntu 10.04LTS \n\l (x86_64 GNU/Linux) / Pentium(R) Dual-core T4500 @ 2.30 GHZ

Hors ligne

#18 Le 08/06/2008, à 20:46

Socrates

Re : fonction scanneur "perfection 1250" & Xcane

tijean97427 a écrit :

En fait , je N'AI PAS UTILISE ALIEN .

J'avais réussi à "aliéniser" et à  installer l'un des fichiers iscan (mais pas le iscan plugin) . Mais je l'ai ensuite désinstallé : supprimé  iscan dans le gestionnaire de paquets !
 
Après réflexion, je pense que mon scanner fonctionnait depuis le départ sans iscan : la preuve , actuellement, il démarre automatiquement  avec Xsane : pour moi le tuto sur les scanners Epson est inutile et m'a induit en erreur.

En fait, au début, je n'attendais sans doute pas suffisamment longtemps pour faire "chauffer"  le moteur du scanner.Du coup , j'arrêtais à chaque fois le processus sans attendre le démarrage qui était pourtant imminent ! Et c'est seulement maintenant que je viens de m'en rendre compte ! (Quel c... !)

En  ce qui me concerne , les choses sont claires : XSANE utilise  correctement le Perfection 1250 sous   HARDY HERON et surtout sans iscan : TOUT EST AUTOMATIQUE ET NICKEL .

Pour moi (bien évidemment cela est lié à ma propre configuration matérielle) , le tuto est obsolète concernant le Epson 1250 .

après les mises à jours ça ne fonctionnait toujours pas, merci quand même de ton aide.


MSI CR700~ubuntu 10.04LTS \n\l (x86_64 GNU/Linux) / Pentium(R) Dual-core T4500 @ 2.30 GHZ

Hors ligne

#19 Le 05/10/2008, à 13:54

pfercour

Re : fonction scanneur "perfection 1250" & Xcane

Bonjour,
avec beaucoup de retard sur ce fil ;-)

Sous Hardy Heron, avec une RX700.
juste un petit truc qui m'avait coincé lors de l'utilisation de xsane avec
mon Epson stylus photo RX700 :
Si l'imprimante (tout en un pour ce modèle) est en veille cela bloque tout.
Un petit coup sur le bouton d'allumage pour sortir de la veille avant de lancer
xsane et tout fonctionne sans le bric à brac de passer par alien etc.
Bien entendu cela coince si l'on ne peut accèder à l'imprimante, tester alors en lancant
une première fois puis fermer xsane et le relancer.

Hors ligne