#1 Le 28/08/2008, à 19:02
- legz
Double Bureau - Configuration de Xorg ?
Bonjour,
Je fais appel a vous pour m'aider à configurer Xorg en mode double-bureau.
Je m'explique:
J'ai deux écran branché en DVI sur un NVidia 8800GT, mais pas moyen de faire marcher les 2 écrans simultanément, hormis en utilisant l'option twinview dispo via les pilotes NVidia.
J'aimerai avoir un bureau sur chaque écran, et non un seul bureau étendu...
J'ai essayé le tuto dispo dans la doc sur le multi-écran mais visiblement ca marche pas
Voici mon xorg.conf d'origine (un seul écran fonctionne...):
Section "Device"
Identifier "Configured Video Device"
Driver "nvidia"
Option "NoLogo" "True"
EndSection
Section "Monitor"
Identifier "Configured Monitor"
EndSection
Section "Screen"
Identifier "Default Screen"
Monitor "Configured Monitor"
Device "Configured Video Device"
Defaultdepth 24
EndSection
Section "ServerLayout"
Identifier "Default Layout"
screen "Default Screen"
EndSection
Section "Module"
Load "glx"
EndSection
Merci de votre aide !
Me suivre sur Twitter ? C'est par ici : http://twitter.com/legz !
Hors ligne
#2 Le 30/08/2008, à 10:12
- Sagittarus
Re : Double Bureau - Configuration de Xorg ?
bonjour,
---- Contenu de mon /etc/X11/xorg.conf ----
# nvidia-settings: X configuration file generated by nvidia-settings
# nvidia-settings: version 1.0 (buildd@vernadsky) Thu Jun 5 09:26:53 UTC 2008
Section "ServerLayout"
Identifier "Layout0"
Screen 0 "Screen0" 0 0
Screen 1 "Screen1" RightOf "Screen0"
InputDevice "Keyboard0" "CoreKeyboard"
InputDevice "Mouse0" "CorePointer"
EndSection
Section "Files"
RgbPath "/usr/X11R6/lib/X11/rgb"
EndSection
Section "Module"
Load "dbe"
Load "extmod"
Load "type1"
Load "freetype"
Load "glx"
EndSection
Section "ServerFlags"
Option "Xinerama" "0"
EndSection
Section "InputDevice"
# generated from default
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/psaux"
Option "Emulate3Buttons" "no"
Option "ZAxisMapping" "4 5"
EndSection
Section "InputDevice"
# generated from default
Identifier "Keyboard0"
Driver "kbd"
Option "CoreKeyboard"
Option "XkbRules" "xorg"
Option "XkbModel" "pc105"
Option "XkbLayout" "fr"
EndSection
Section "Monitor"
# HorizSync source: edid, VertRefresh source: edid
Identifier "Vision_Master_Pro_413"
VendorName "Iiyama"
ModelName "Iiyama HM703U"
HorizSync 30.0 - 96.0
VertRefresh 50.0 - 160.0
ModeLine "1280x1024@85" 157.5 1280 1344 1504 1728 1024 1025 1028 1072 +hsync +vsync
ModeLine "1280x1024@60" 108.0 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync
ModeLine "1280x960@85" 148.5 1280 1344 1504 1728 960 961 964 1011 +hsync +vsync
ModeLine "1280x960@75" 129.9 1280 1368 1504 1728 960 961 964 1002 -hsync +vsync
ModeLine "1280x960@60" 102.1 1280 1360 1496 1712 960 961 964 994 -hsync +vsync
ModeLine "1400x1050@60" 122.6 1400 1488 1640 1880 1050 1051 1054 1087 -hsync +vsync
ModeLine "1280x1024@75" 135.0 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync
ModeLine "1400x1050@75" 155.8 1400 1496 1648 1896 1050 1051 1054 1096 -hsync +vsync
ModeLine "1152x864@75" 108.0 1152 1216 1344 1600 864 865 868 900 +hsync +vsync
ModeLine "1600x1200@65" 175.5 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync
ModeLine "1024x768@60" 65.0 1024 1048 1184 1344 768 771 777 806 -hsync -vsync
ModeLine "1600x1200@60" 162.0 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync
ModeLine "1024x768@70" 75.0 1024 1048 1184 1328 768 771 777 806 -hsync -vsync
ModeLine "1600x1200@75" 202.5 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync
ModeLine "1024x768@75" 78.8 1024 1040 1136 1312 768 769 772 800 +hsync +vsync
ModeLine "1600x1200@70" 189.0 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync
ModeLine "1024x768@85" 94.5 1024 1072 1168 1376 768 769 772 808 +hsync +vsync
ModeLine "832x624@75" 57.3 832 864 928 1152 624 625 628 667 -hsync -vsync
ModeLine "800x600@60" 40.0 800 840 968 1056 600 601 605 628 +hsync +vsync
ModeLine "800x600@85" 56.3 800 832 896 1048 600 601 604 631 +hsync +vsync
ModeLine "800x600@75" 49.5 800 816 896 1056 600 601 604 625 +hsync +vsync
ModeLine "800x600@72" 50.0 800 856 976 1040 600 637 643 666 +hsync +vsync
ModeLine "800x600@56" 36.0 800 824 896 1024 600 601 603 625 +hsync +vsync
Option "DPMS"
EndSection
Section "Monitor"
# HorizSync source: edid, VertRefresh source: edid
Identifier "Vision_Master_Pro_410"
VendorName "Iiyama"
ModelName "Iiyama"
HorizSync 31.0 - 93.0
VertRefresh 56.0 - 75.0
ModeLine "1280x1024@85" 157.5 1280 1344 1504 1728 1024 1025 1028 1072 +hsync +vsync
ModeLine "1152x864@75" 108.0 1152 1216 1344 1600 864 865 868 900 +hsync +vsync
ModeLine "1024x768@60" 65.0 1024 1048 1184 1344 768 771 777 806 -hsync -vsync
ModeLine "1280x1024@75" 135.0 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync
ModeLine "1024x768@70" 75.0 1024 1048 1184 1328 768 771 777 806 -hsync -vsync
ModeLine "1280x960@60" 102.1 1280 1360 1496 1712 960 961 964 994 -hsync +vsync
ModeLine "1024x768@75" 78.8 1024 1040 1136 1312 768 769 772 800 +hsync +vsync
ModeLine "832x624@75" 57.3 832 864 928 1152 624 625 628 667 -hsync -vsync
ModeLine "1280x1024@60" 108.0 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync
ModeLine "800x600@60" 40.0 800 840 968 1056 600 601 605 628 +hsync +vsync
ModeLine "1280x960@75" 129.9 1280 1368 1504 1728 960 961 964 1002 -hsync +vsync
ModeLine "1400x1050@60" 122.6 1400 1488 1640 1880 1050 1051 1054 1087 -hsync +vsync
ModeLine "800x600@75" 49.5 800 816 896 1056 600 601 604 625 +hsync +vsync
ModeLine "1400x1050@75" 155.8 1400 1496 1648 1896 1050 1051 1054 1096 -hsync +vsync
ModeLine "800x600@72" 50.0 800 856 976 1040 600 637 643 666 +hsync +vsync
ModeLine "1600x1200@65" 175.5 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync
ModeLine "800x600@56" 36.0 800 824 896 1024 600 601 603 625 +hsync +vsync
ModeLine "1600x1200@60" 162.0 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync
ModeLine "1600x1200@75" 202.5 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync
ModeLine "1600x1200@70" 189.0 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync
Option "DPMS"
EndSection
Section "Device"
Identifier "Videocard0"
Driver "nvidia"
VendorName "NVIDIA Corporation"
BoardName "GeForce 6800"
BusID "PCI:1:0:0"
Screen 0
EndSection
Section "Device"
Identifier "Videocard1"
Driver "nvidia"
VendorName "NVIDIA Corporation"
BoardName "GeForce 6800"
BusID "PCI:1:0:0"
Screen 1
EndSection
Section "Screen"
Identifier "Screen0"
Device "Videocard0"
Monitor "Vision_Master_Pro_413"
DefaultDepth 24
Option "TwinView" "0"
Option "TwinViewXineramaInfoOrder" "CRT-0"
Option "metamodes" "CRT-0: 1280x1024@75 +0+0; CRT-0: 1280x1024@60 +0+0; CRT-0: 1280x960@85 +0+0; CRT-0: 1280x960@75 +0+0; CRT-0: 1280x960@60 +0+0; CRT-0: 1280x1024@85 +0+0; CRT-0: 1152x864@75 +0+0; CRT-0: 1024x768@60 +0+0; CRT-0: 1024x768@70 +0+0; CRT-0: 1024x768@75 +0+0; CRT-0: 1024x768@85 +0+0; CRT-0: 832x624@75 +0+0; CRT-0: 800x600@60 +0+0; CRT-0: 800x600@85 +0+0; CRT-0: 800x600@75 +0+0; CRT-0: 800x600@72 +0+0; CRT-0: 800x600@56 +0+0; CRT-0: 1024x768 +0+0; CRT-0: 1024x768_87i +0+0"
SubSection "Display"
Depth 24
EndSubSection
EndSection
Section "Screen"
Identifier "Screen1"
Device "Videocard1"
Monitor "Vision_Master_Pro_410"
DefaultDepth 24
Option "TwinView" "0"
Option "metamodes" "CRT-1: 1280x1024@75 +0+0; CRT-1: 1152x864@75 +0+0; CRT-1: 1024x768@60 +0+0; CRT-1: 1024x768@70 +0+0; CRT-1: 1280x960@60 +0+0; CRT-1: 1024x768@75 +0+0; CRT-1: 832x624@75 +0+0; CRT-1: 1280x1024@60 +0+0; CRT-1: 800x600@60 +0+0; CRT-1: 1280x960@75 +0+0; CRT-1: 800x600@75 +0+0; CRT-1: 800x600@72 +0+0; CRT-1: 800x600@56 +0+0"
SubSection "Display"
Depth 24
EndSubSection
EndSection
----------
Espérant que cela fasse votre bonheur...
Cdlt.
Dernière modification par Sagittarus (Le 31/08/2008, à 10:44)
E PLURIBUS UNUM
3 postes Ubuntu / 1 poste XP / 1 serveur Debian / et un portable XP-Ubuntu
Hors ligne
#3 Le 02/09/2008, à 02:40
- legz
Re : Double Bureau - Configuration de Xorg ?
Parfait le problème est résolu....
...Mais je constate un ralentissement de compiz sur l'écran principal
Les fenêtres mettent un certain temps (environs 2-3sec) pour s'ouvrir, idem pour les menus, et je ne parle pas du cairo dock...
Alors que sur l'écran secondaire pas de problème !
C'est deja arrivé a quelqu'un ?
Me suivre sur Twitter ? C'est par ici : http://twitter.com/legz !
Hors ligne
#4 Le 02/09/2008, à 20:07
- Sagittarus
Re : Double Bureau - Configuration de Xorg ?
oui , à moi
mais en fait je pensais que cela venait du fait qu'un seul de mes deux écran est reconnu comme il se doit (IIYAMA_VisionMasterPro410 et IIYAMA_VisionMasterPro413), et que j'ai activé cette fonctionnalité juste pour le fun, ensuite j'ai sauvegardé la config et remis le xorg.conf d'origine.
Je n'avais pas peaufiné les résolutions sur le IIYAMA 413.
De votre coté avez-vous renseigné les résolutions respectives de vos écrans ?
Dernière modification par Sagittarus (Le 02/09/2008, à 20:12)
E PLURIBUS UNUM
3 postes Ubuntu / 1 poste XP / 1 serveur Debian / et un portable XP-Ubuntu
Hors ligne
#5 Le 02/09/2008, à 22:55
- legz
Re : Double Bureau - Configuration de Xorg ?
Voila mon xorg.conf :
# nvidia-settings: X configuration file generated by nvidia-settings
# nvidia-settings: version 1.0 (buildd@vernadsky) Thu Jun 5 09:26:53 UTC 2008
Section "ServerLayout"
Identifier "Default Layout"
Screen 0 "Screen0" 0 0
Screen 1 "Screen1" RightOf "Screen0"
EndSection
Section "Module"
Load "glx"
EndSection
Section "ServerFlags"
Option "Xinerama" "0"
EndSection
Section "InputDevice"
Identifier "Generic Keyboard"
Driver "kbd"
Option "XkbRules" "xorg"
Option "XkbModel" "pc105"
Option "XkbLayout" "fr"
Option "XkbVariant" "oss"
EndSection
Section "InputDevice"
Identifier "Configured Mouse"
Driver "mouse"
Option "CorePointer"
EndSection
Section "Monitor"
Identifier "Configured Monitor"
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "Unknown"
ModelName "HSD Hanns.G HG281"
HorizSync 24.0 - 80.0
VertRefresh 56.0 - 75.0
EndSection
Section "Monitor"
Identifier "Monitor1"
VendorName "Unknown"
ModelName "HIQ L90D+ DVI"
HorizSync 31.0 - 67.0
VertRefresh 59.0 - 61.0
EndSection
Section "Device"
Identifier "Configured Video Device"
Driver "nvidia"
Option "NoLogo" "True"
EndSection
Section "Device"
Identifier "Videocard0"
Driver "nvidia"
VendorName "NVIDIA Corporation"
BoardName "GeForce 8800 GT"
BusID "PCI:1:0:0"
Screen 0
EndSection
Section "Device"
Identifier "Videocard1"
Driver "nvidia"
VendorName "NVIDIA Corporation"
BoardName "GeForce 8800 GT"
Option "Rotate" "left"
BusID "PCI:1:0:0"
Screen 1
EndSection
Section "Screen"
Identifier "Default Screen"
Device "Configured Video Device"
Monitor "Configured Monitor"
DefaultDepth 24
EndSection
Section "Screen"
Identifier "Screen0"
Device "Videocard0"
Monitor "Monitor0"
DefaultDepth 24
Option "TwinView" "0"
Option "metamodes" "DFP-0: 1920x1200 +0+0; DFP-0: nvidia-auto-select +0+0"
EndSection
Section "Screen"
Identifier "Screen1"
Device "Videocard1"
Monitor "Monitor1"
DefaultDepth 24
Option "TwinView" "0"
Option "metamodes" "DFP-1: 1280x1024 +0+0"
EndSection
Les résolutions ne sont indiquées que dans les metamodes, je devrais les mettre dans la section "Monitor" ?
Me suivre sur Twitter ? C'est par ici : http://twitter.com/legz !
Hors ligne
#6 Le 07/09/2008, à 00:30
- Sagittarus
Re : Double Bureau - Configuration de Xorg ?
bonsoir,
je sèche également sur ce point de "lenteur" sur le 2ième écran...
car vu de ma carte vidéo l'écran "lent" c'est le 2ième !
du coup, est-ce à dire que c'est normal ?
pas si sur car j'ai noté un autre problème qui m'avait échappé :
je n'ai plus certains effets visuels lorsque j'active le xorg en double écran (les bordures de fenêtres par exemple)
=> serait-ce un soucis avec Compiz qui gère mal le dual-screen ?
E PLURIBUS UNUM
3 postes Ubuntu / 1 poste XP / 1 serveur Debian / et un portable XP-Ubuntu
Hors ligne
#7 Le 07/09/2008, à 13:34
- legz
Re : Double Bureau - Configuration de Xorg ?
pas si sur car j'ai noté un autre problème qui m'avait échappé :
je n'ai plus certains effets visuels lorsque j'active le xorg en double écran (les bordures de fenêtres par exemple)=> serait-ce un soucis avec Compiz qui gère mal le dual-screen ?
Tu dois utiliser Emerald comme gestionnaire de fenêtre, il faut le relancer sur le 2e écran avec l'option "--display=:0.1" pour avoir 2 instances Emerald.
Ca marche pareil avec Compiz, tu le relance sur le 2e écran et zou tout va bien
M'enfin au final tu as 2 serveurs X, 2 Compiz, 2 Emerald... une usine gaz quoi
Dernière modification par legz (Le 07/09/2008, à 13:34)
Me suivre sur Twitter ? C'est par ici : http://twitter.com/legz !
Hors ligne
#8 Le 07/09/2008, à 21:29
- Sagittarus
Re : Double Bureau - Configuration de Xorg ?
bonsoir,
en fait j'utilise GTK tout simplement, certes j'ai testé Emerald...
Pour la "double config usine à gaz" je suis d'accord c'est nul
S'il faut doubler les services c'est pas franchement idéal,
mais pourtant dans le principe c'est cohérent il me semble,
et ça n'explique pas ces problèmes de lenteur sur le 2ième écran
quelqu'un a-t-il une idée ?
courage Legz
E PLURIBUS UNUM
3 postes Ubuntu / 1 poste XP / 1 serveur Debian / et un portable XP-Ubuntu
Hors ligne
#9 Le 15/09/2008, à 23:55
- legz
Re : Double Bureau - Configuration de Xorg ?
J'ai regardé du coté de ibex qui semble mieux gérer le Dual-Screen en natif, mais même la dernière alpha est encore trop buguée
Me suivre sur Twitter ? C'est par ici : http://twitter.com/legz !
Hors ligne