Ubuntu-fr

salamandre

Configuration carte graphique S3 SAVAGE 4

Bonjour,

J'ai un probleme avec ma carte graphique, je n'arrive pas a la configurer pour Xorg.conf

   Voici le détails de ma carte :

salamandre@salamandre:~$ sudo ddcprobe
vbe: VESA 3.0 detected.
oem: S3 Incorporated. Savage4
vendor: S3 Incorporated.
product: Savage4 Rev B
memory: 32768kb
mode: 320x200x64k
mode: 320x200x16m
mode: 132x25 (text)
mode: 132x43 (text)
mode: 640x400x256
mode: 640x480x256
mode: 640x480x64k
mode: 640x480x16m
mode: 800x600x256
mode: 800x600x64k
mode: 800x600x16m
mode: 1024x768x256
mode: 1024x768x64k
mode: 1024x768x16m
mode: 1280x1024x256
mode: 1280x1024x64k
mode: 1280x1024x16m
mode: 1600x1200x256
mode: 1600x1200x64k
edid: 
edid: 1 0
id: 09c0
eisa: OLI09c0
serial: 006b7f29
manufacture: 41 1996
input: sync on green, analog signal.
screensize: 28 21
gamma: 2.100000
dpms: RGB, active off, suspend, standby
timing: 640x480@60 Hz (VGA)
timing: 640x480@67 Hz (Mac II, Apple)
timing: 640x480@75 Hz (VESA)
timing: 800x600@60 Hz (VESA)
timing: 800x600@75 Hz (VESA)
timing: 832x624@75 Hz (Mac II)
timing: 1024x768@87 Hz Interlaced (8514A)
timing: 1024x768@75 Hz (VESA)
timing: 1280x1024@75 (VESA)

salamandre@salamandre:~$ lspci
00:00.0 Host bridge: VIA Technologies, Inc. VT8363/8365 [KT133/KM133] (rev 81)
00:01.0 PCI bridge: VIA Technologies, Inc. VT8363/8365 [KT133/KM133 AGP]
00:07.0 ISA bridge: VIA Technologies, Inc. VT82C686 [Apollo Super South] (rev 40)
00:07.1 IDE interface: VIA Technologies, Inc. VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE (rev 06)
00:07.2 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 1a)
00:07.3 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 1a)
00:07.4 Bridge: VIA Technologies, Inc. VT82C686 [Apollo Super ACPI] (rev 40)
00:0a.0 Modem: PCTel Inc HSP MicroModem 56 (rev 02)
00:0e.0 Multimedia audio controller: Ensoniq 5880 AudioPCI (rev 02)
01:00.0 VGA compatible controller: S3 Inc. ProSavage KM133 (rev 03)

Mon fichier Xorg.conf :

Section "InputDevice"
	Identifier	"Generic Keyboard"
	Driver		"kbd"
	Option		"XkbRules"	"xorg"
	Option		"XkbModel"	"pc105"
	Option		"XkbLayout"	"fr"
	Option		"XkbVariant"	"oss"
EndSection

Section "InputDevice"
	Identifier	"Configured Mouse"
	Driver		"mouse"
	Option		"CorePointer"
EndSection

Section "Device"
	Identifier	"Configured Video Device"
EndSection

Section "Monitor"
	Identifier	"Configured Monitor"
	HorizSync    30-70
        VertRefresh  50-90
EndSection

Section "Screen"
	Identifier	"Default Screen"
	Monitor		"Configured Monitor"
	Device		"Configured Video Device"
EndSection

Section "ServerLayout"
	Identifier	"Default Layout"
	Screen		"Default Screen"
EndSection

Merci de votre aide...........