Pages : 1
#1 Le 30/01/2006, à 21:22
- gnoufti
vmware ne trouve pas le cd-rom,...
J'ai installé Vmware sous Ubuntu, maintenant j'aimerais installer un autre OS sous vmware.
Je n'arrive pas à voir le lecteur DVD ou cd-rom sous vmware, le message suivant apparaît dès que je click sur "connect CD-ROM" (icône qui se trouve à côté de celui "Ethernet" et "Sound Adapter"):
File "ubuntu-5.10-install-i386.iso" does not exist and therefore cannot be connected as a CD-ROM image.
Failed to connect virtual device ide1:0.
Alors ma question, est la suivante, comment faire pour accéder au cd-rom?
Ensuite, une fois ce problème résolu, j'aimerais installer un autre OS, comment faire?
A savoir que je pensais changer le boot dans le bios de vmware, mettre cd-rom au lieu du HD, mais j'ai entendu parler de fichier ISO, comment procéder?
This issue occurs on Linux hosts only. Under certain circumstances, data from the CD-ROM is not detected by GSX Server and the CD-ROM drive does not function. One cause of this issue is that the configuration of the physical CD-ROM drive on the host may be modified to use a relative symlink to the device.
To correct this issue, first check to see if the CD-ROM drive is set up as a relative symlink. In a terminal, run the following command:
ls -lo /dev/cdrom
If the terminal returns output like the following, you have a relative symlink which must be fixed:
lrwxrwxrwx 1 root 3 2005-06-21 12:18 /dev/cdrom -> hdc
To fix the relative symlink, follow the steps below.
If the section of the output after -> starts with a / or if /dev/cdrom is not a symlink at all (that is, the line in the output does not start with l), then the workaround in this article does not apply. If the CD-ROM drive is not configured as a symlink but you are having issues with the CD-ROM drive in a virtual machine, file a support request at www.vmware.com/requestsupport.
If the CD-ROM drive is configured as a symlink, replace the relative symlink with an absolute link. Complete the following steps.
1.
On the GSX Server Linux host, log on as root.
su -
2.In a terminal, run the following command. This example assumes the CD-ROM drive is linked to the default CD-ROM device, typically hdc0.
ln -sf /dev/hdc0 /dev/cdrom
J'ai essayé ceci, mais j'obtiens ce message une fois que j'ai entré et valider le password "Autnetification failure"; à savoir que j'ai essayé de taper le mot de passe aussi bien en Qwerty qu'en Azerty (car vmware est encore en qwerty).
D'avance, merci pour vos solutions
Pages : 1