Pages : 1
#1 Le 01/11/2008, à 14:01
- emlesna
son tuner TV Hauppauge
bonjour,
J'ai bien l'image avec mon tuner WINTV mais pas le son :
J'utilise Tvtime :
voici de que me renvoie dmesg | grep bttv :
[ 13.899171] bttv: driver version 0.9.17 loaded
[ 13.899174] bttv: using 8 buffers with 2080k (520 pages) each for capture
[ 13.900659] bttv: Bt8xx card found (0).
[ 13.900671] bttv 0000:01:00.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
[ 13.900680] bttv0: Bt878 (rev 17) at 0000:01:00.0, irq: 21, latency: 64, mmio: 0xcfdfe000
[ 13.900690] bttv0: detected: Hauppauge WinTV [card=10], PCI subsystem ID is 0070:13eb
[ 13.900693] bttv0: using: Hauppauge (bt878) [card=10,autodetected]
[ 13.900717] bttv0: gpio: en=00000000, out=00000000 in=00ffffdb [init]
[ 13.903198] bttv0: Hauppauge/Voodoo msp34xx: reset line init [5]
[ 13.934533] bttv0: Hauppauge eeprom indicates model#44806
[ 13.934535] bttv0: tuner type=3
[ 13.934537] bttv0: i2c: checking for MSP34xx @ 0x80... not found
[ 13.944326] bttv0: i2c: checking for TDA9875 @ 0xb0... not found
[ 13.944938] bttv0: i2c: checking for TDA7432 @ 0x8a... not found
[ 14.290224] bttv0: registered device video0
[ 14.290260] bttv0: registered device vbi0
[ 14.290280] bttv0: PLL: 28636363 => 35468950 .. ok
[ 7396.219428] bttv0: PLL can sleep, using XTAL (28636363).
[ 7396.220282] bttv0: PLL: 28636363 => 35468950 .. ok
et un lspci | grep -i audio :
00:1b.0 Audio device: Intel Corporation 82801G (ICH7 Family) High Definition Audio Controller (rev 01)
01:00.1 Multimedia controller: Brooktree Corporation Bt878 Audio Capture (rev 11)
J'ai regarder dans le contrôleur de volume mais tout a l'air bien activé .
Je sèche....
Indicateur de position dans les moteurs de recherche :
http://rankmonitor.webou.net
Hors ligne
Pages : 1