Pages : 1
#1 Le 09/02/2009, à 17:57
- Moua14
pas de connection WiFi, mais réseau détecté
Bonjour a tous
Je viens d'installer Xubuntu 8.10 sur ma modeste machine (Athlon 2600+; 256M RAM) je branche ma clé WiFi (Sagem XG 703A) elle est reconnue sans soucis, je vais voir dans NetWorkManager, il trouve bien mon résau (NEUF_CE28)je clique sur connexion, et il ne veut pas se connecter.
Pour etre précis, après plus d'une minute de tentative de connexion, il me dit "The network connection has been deconnected"
Je précise qu'il n'y a pas de clé WPA
quentin@quentin-desktop:~$ lsusb
Bus 003 Device 007: ID 0cde:0008 Z-Com Sitecom Wireless Network Adapter 100G+ WL-125
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
quentin@quentin-desktop:~$ lspci
00:00.0 Host bridge: nVidia Corporation nForce2 IGP2 (rev a2)
00:00.1 RAM memory: nVidia Corporation nForce2 Memory Controller 1 (rev a2)
00:00.2 RAM memory: nVidia Corporation nForce2 Memory Controller 4 (rev a2)
00:00.3 RAM memory: nVidia Corporation nForce2 Memory Controller 3 (rev a2)
00:00.4 RAM memory: nVidia Corporation nForce2 Memory Controller 2 (rev a2)
00:00.5 RAM memory: nVidia Corporation nForce2 Memory Controller 5 (rev a2)
00:01.0 ISA bridge: nVidia Corporation nForce2 ISA Bridge (rev a4)
00:01.1 SMBus: nVidia Corporation nForce2 SMBus (MCP) (rev a2)
00:02.0 USB Controller: nVidia Corporation nForce2 USB Controller (rev a4)
00:02.1 USB Controller: nVidia Corporation nForce2 USB Controller (rev a4)
00:02.2 USB Controller: nVidia Corporation nForce2 USB Controller (rev a4)
00:04.0 Ethernet controller: nVidia Corporation nForce2 Ethernet Controller (rev a1)
00:06.0 Multimedia audio controller: nVidia Corporation nForce2 AC97 Audio Controler (MCP) (rev a1)
00:08.0 PCI bridge: nVidia Corporation nForce2 External PCI Bridge (rev a3)
00:09.0 IDE interface: nVidia Corporation nForce2 IDE (rev a2)
00:1e.0 PCI bridge: nVidia Corporation nForce2 AGP (rev a2)
01:08.0 Modem: Smart Link Ltd. SmartLink SmartPCI562 56K Modem (rev 03)
02:00.0 VGA compatible controller: ATI Technologies Inc RV280 [Radeon 9200 SE] (rev 01)
02:00.1 Display controller: ATI Technologies Inc RV280 [Radeon 9200 SE] (Secondary) (rev 01)
quentin@quentin-desktop:~$ sudo lshw -C network
[sudo] password for quentin:
*-network
description: Ethernet interface
product: nForce2 Ethernet Controller
vendor: nVidia Corporation
physical id: 4
bus info: pci@0000:00:04.0
logical name: eth0
version: a1
serial: 00:0c:6e:ea:10:80
size: 100MB/s
capacity: 100MB/s
width: 32 bits
clock: 66MHz
capabilities: pm bus_master cap_list ethernet physical mii 10bt 10bt-fd 100bt 100bt-fd autonegotiation
configuration: autonegotiation=on broadcast=yes driver=forcedeth driverversion=0.61 duplex=full ip=192.168.1.21 latency=0 link=yes maxlatency=20 mingnt=1 module=forcedeth multicast=yes port=MII speed=100MB/s
*-network:0 DISABLED
description: Ethernet interface
physical id: 1
logical name: pan0
serial: b2:1e:74:09:00:e3
capabilities: ethernet physical
configuration: broadcast=yes driver=bridge driverversion=2.3 firmware=N/A link=yes multicast=yes
*-network:1
description: Wireless interface
physical id: 2
logical name: wlan0
serial: 00:60:b3:dc:33:d8
capabilities: ethernet physical wireless
configuration: broadcast=yes multicast=yes wireless=IEEE 802.11bg
quentin@quentin-desktop:~$ iwconfig
lo no wireless extensions.
eth0 no wireless extensions.
pan0 no wireless extensions.
wmaster0 no wireless extensions.
wlan0 IEEE 802.11bg ESSID:"NEUF_CE28"
Mode:Managed Frequency:2.462 GHz Access Point: Not-Associated
Tx-Power=27 dBm
Retry min limit:7 RTS thr:off Fragment thr=2352 B
Power Management:off
Link Quality:0 Signal level:0 Noise level:0
Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0
Tx excessive retries:0 Invalid misc:0 Missed beacon:0
quentin@quentin-desktop:~$ ifconfig
eth0 Link encap:Ethernet HWaddr 00:0c:6e:ea:10:80
inet adr:192.168.1.21 Bcast:192.168.1.255 Masque:255.255.255.0
adr inet6: fe80::20c:6eff:feea:1080/64 Scope:Lien
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
Packets reçus:973 erreurs:0 :0 overruns:0 frame:0
TX packets:930 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 lg file transmission:1000
Octets reçus:693655 (693.6 KB) Octets transmis:142771 (142.7 KB)
Interruption:22 Adresse de base:0x2000
lo Link encap:Boucle locale
inet adr:127.0.0.1 Masque:255.0.0.0
adr inet6: ::1/128 Scope:Hôte
UP LOOPBACK RUNNING MTU:16436 Metric:1
Packets reçus:90 erreurs:0 :0 overruns:0 frame:0
TX packets:90 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 lg file transmission:0
Octets reçus:5305 (5.3 KB) Octets transmis:5305 (5.3 KB)
wlan0 Link encap:Ethernet HWaddr 00:60:b3:dc:33:d8
UP BROADCAST MULTICAST MTU:1500 Metric:1
Packets reçus:0 erreurs:0 :0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 lg file transmission:1000
Octets reçus:0 (0.0 B) Octets transmis:0 (0.0 B)
wmaster0 Link encap:UNSPEC HWaddr 00-60-B3-DC-33-D8-00-00-00-00-00-00-00-00-00-00
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
Packets reçus:0 erreurs:0 :0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 lg file transmission:1000
Octets reçus:0 (0.0 B) Octets transmis:0 (0.0 B)
quentin@quentin-desktop:~$ sudo iwlist scan
lo Interface doesn't support scanning.
eth0 Interface doesn't support scanning.
pan0 Interface doesn't support scanning.
wmaster0 Interface doesn't support scanning.
wlan0 Scan completed :
Cell 01 - Address: 00:17:33:E1:CE:29
ESSID:"NEUF_CE28"
Mode:Master
Channel:11
Frequency:2.462 GHz (Channel 11)
Quality=45/100 Signal level:58/127
Encryption key:off
Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 11 Mb/s; 18 Mb/s
24 Mb/s; 36 Mb/s; 54 Mb/s; 6 Mb/s; 9 Mb/s
12 Mb/s; 48 Mb/s
Extra:tsf=000000022f1cd008
Extra: Last beacon: 228ms ago
quentin@quentin-desktop:~$ cat /etc/network/interfaces
auto lo
iface lo inet loopback
iface wlan0 inet dhcp
wireless-essid NEUF_CE28
auto wlan0
quentin@quentin-desktop:~$ nm-tool
NetworkManager Tool
State: connected
- Device: eth0 ----------------------------------------------------------------
Type: Wired
Driver: forcedeth
State: connected
Default: yes
HW Address: 00:0C:6E:EA:10:80
Capabilities:
Supported: yes
Carrier Detect: yes
Speed: 100 Mb/s
Wired Settings
IPv4 Settings:
Address: 192.168.1.21
Prefix: 24 (255.255.255.0)
Gateway: 192.168.1.1
DNS: 192.168.1.1
- Device: wlan0 ----------------------------------------------------------------
Type: 802.11 WiFi
Driver: prism54usb
State: disconnected
Default: no
HW Address: 00:60:B3:DC:33:D8
Capabilities:
Supported: yes
Wireless Settings
WEP Encryption: yes
WPA Encryption: yes
WPA2 Encryption: yes
Wireless Access Points
NEUF_CE28: Infra, 00:17:33:E1:CE:29, Freq 2462 MHz, Rate 54 Mb/s, Strength 54
Merci d'avance
Pages : 1