Pages : 1
#1 Le 02/04/2009, à 00:49
- ramoul
X redémarre après lecture d'un avi
Hello,
lorsque j'ouvre un fichier avi avec totem, totem se ferme, si j'ouvre un avi avec vlc X plante et je me retrouve à l'invite du login...
Pas moyen d'avoir un message d'erreur avec un terminal car X redémarre de suite.
Vous avez une idée du problème ou de comment savoir ce qui cause le problème (fichier log à chercher?)
merci
Hors ligne
#2 Le 02/04/2009, à 11:32
- yanapu
Re : X redémarre après lecture d'un avi
Tu peux regarder dans le fichier /var/log/Xorg.0.log (log du server X).
Ou bien dmesg (noyau)
Si tu as le courage, un rapport de bug serait super!
Hors ligne
#3 Le 03/04/2009, à 00:33
- ramoul
Re : X redémarre après lecture d'un avi
Hello,
voici les deux fichiers, j'avoue ne rien voir de suspect...
pour info j'ai fait un update-manager -d depuis Intrepid pour avoir Jaunty
Xorg.0.log
X.Org X Server 1.6.0
Release Date: 2009-2-25
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.24-23-server i686 Ubuntu
Current Operating System: Linux benMSIubuntu 2.6.28-11-generic #39-Ubuntu SMP Thu Apr 2 03:00:35 UTC 2009 i686
Build Date: 02 April 2009 03:24:13AM
xorg-server 2:1.6.0-0ubuntu8 (buildd@rothera.buildd)
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Thu Apr 2 18:25:32 2009
(==) Using config file: "/etc/X11/xorg.conf"
(==) No Layout section. Using the first Screen section.
(**) |-->Screen "Default Screen" (0)
(**) | |-->Monitor "Configured Monitor"
(**) | |-->Device "Configured Video Device"
(==) Automatically adding devices
(==) Automatically enabling devices
(WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
Entry deleted from font path.
(==) FontPath set to:
/usr/share/fonts/X11/misc,
/usr/share/fonts/X11/100dpi/:unscaled,
/usr/share/fonts/X11/75dpi/:unscaled,
/usr/share/fonts/X11/Type1,
/usr/share/fonts/X11/100dpi,
/usr/share/fonts/X11/75dpi,
/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType,
built-ins
(==) ModulePath set to "/usr/lib/xorg/modules"
(**) Extension "Composite" is enabled
(II) Cannot locate a core pointer device.
(II) Cannot locate a core keyboard device.
(II) The server relies on HAL to provide the list of input devices.
If no devices become available, reconfigure HAL or disable AllowEmptyInput.
(II) Loader magic: 0x3bc0
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.4
X.Org Video Driver: 5.0
X.Org XInput driver : 4.0
X.Org Server Extension : 2.0
(II) Loader running on linux
(++) using VT number 7
(--) PCI:*(0@0:2:0) Intel Corporation Mobile 945GME Express Integrated Graphics Controller rev 3, Mem @ 0xdfe80000/524288, 0xc0000000/268435456, 0xdff00000/262144, I/O @ 0x0000e0f0/8
(II) Open ACPI successful (/var/run/acpid.socket)
(II) System resource ranges:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[5] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions//libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
compiled for 1.6.0, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions//libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
compiled for 1.6.0, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions//libglx.so
(II) Module glx: vendor="X.Org Foundation"
compiled for 1.6.0, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(==) AIGLX enabled
(II) Loading extension GLX
(II) LoadModule: "record"
(II) Loading /usr/lib/xorg/modules/extensions//librecord.so
(II) Module record: vendor="X.Org Foundation"
compiled for 1.6.0, module version = 1.13.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension RECORD
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions//libdri.so
(II) Module dri: vendor="X.Org Foundation"
compiled for 1.6.0, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension XFree86-DRI
(II) LoadModule: "dri2"
(II) Loading /usr/lib/xorg/modules/extensions//libdri2.so
(II) Module dri2: vendor="X.Org Foundation"
compiled for 1.6.0, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DRI2
(II) Scanning /usr/share/xserver-xorg/pci directory for additional PCI ID's supported by the drivers
(II) Matched intel from file name intel.ids
(==) Matched intel for the autoconfigured driver
(==) Assigned the driver to the xf86ConfigLayout
(II) LoadModule: "intel"
(II) Loading /usr/lib/xorg/modules/drivers//intel_drv.so
(II) Module intel: vendor="X.Org Foundation"
compiled for 1.6.0, module version = 2.6.3
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 5.0
(II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
i810-dc100, i810e, i815, i830M, 845G, 852GM/855GM, 865G, 915G,
E7221 (i915), 915GM, 945G, 945GM, 945GME, 965G, G35, 965Q, 946GZ,
965GM, 965GME/GLE, G33, Q35, Q33,
Mobile Intel® GM45 Express Chipset,
Intel Integrated Graphics Device, G45/G43, Q45/Q43, G41
(II) Primary Device is: PCI 00@00:02:0
(II) resource ranges after xf86ClaimFixedResources() call:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[5] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
(II) resource ranges after probing:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] 0 0 0x000a0000 - 0x000affff (0x10000) MS[b]
[5] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[b]
[6] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[b]
[7] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[8] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[9] 0 0 0x000003b0 - 0x000003bb (0xc) IS[b]
[10] 0 0 0x000003c0 - 0x000003df (0x20) IS[b]
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/lib/xorg/modules//libvgahw.so
(II) Module vgahw: vendor="X.Org Foundation"
compiled for 1.6.0, module version = 0.1.0
ABI class: X.Org Video Driver, version 5.0
(==) intel(0): Depth 24, (--) framebuffer bpp 32
(==) intel(0): RGB weight 888
(==) intel(0): Default visual is TrueColor
(II) intel(0): Integrated Graphics Chipset: Intel(R) 945GME
(--) intel(0): Chipset: "945GME"
(--) intel(0): Linear framebuffer at 0xC0000000
(--) intel(0): IO registers at addr 0xDFE80000
(WW) intel(0): libpciaccess reported 0 rom size, guessing 64kB
(==) intel(0): Using EXA for acceleration
(II) intel(0): 2 display pipes available.
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Module "ddc" already built-in
(II) Loading sub module "i2c"
(II) LoadModule: "i2c"
(II) Module "i2c" already built-in
(II) intel(0): Output VGA using monitor section Configured Monitor
(II) intel(0): Output LVDS has no monitor section
(II) intel(0): I2C bus "LVDSDDC_C" initialized.
(II) intel(0): Attempting to determine panel fixed mode.
(II) intel(0): I2C device "LVDSDDC_C:E-EDID segment register" registered at address 0x60.
(II) intel(0): I2C device "LVDSDDC_C:ddc2" registered at address 0xA0.
(II) intel(0): EDID vendor "HSD", prod id 1001
(II) intel(0): DDCModeFromDetailedTiming: 1024x600 Warning: We only handle separate sync.
(II) intel(0): found backlight control method /sys/class/backlight/acpi_video0
(II) intel(0): Resizable framebuffer: not available (1 3)
(II) intel(0): EDID vendor "HSD", prod id 1001
(II) intel(0): DDCModeFromDetailedTiming: 1024x600 Warning: We only handle separate sync.
(II) intel(0): Output VGA disconnected
(II) intel(0): Output LVDS connected
(II) intel(0): Using exact sizes for initial modes
(II) intel(0): Output LVDS using initial mode 1024x600
(II) intel(0): detected 256 kB GTT.
(II) intel(0): detected 7932 kB stolen memory.
(==) intel(0): video overlay key set to 0x101fe
(==) intel(0): Using gamma correction (1.0, 1.0, 1.0)
(==) intel(0): DPI set to (96, 96)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules//libfb.so
(II) Module fb: vendor="X.Org Foundation"
compiled for 1.6.0, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.4
(II) Loading sub module "exa"
(II) LoadModule: "exa"
(II) Loading /usr/lib/xorg/modules//libexa.so
(II) Module exa: vendor="X.Org Foundation"
compiled for 1.6.0, module version = 2.4.0
ABI class: X.Org Video Driver, version 5.0
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Module "ramdac" already built-in
(II) intel(0): Comparing regs from server start up to After PreInit
(WW) intel(0): Register 0x61200 (PP_STATUS) changed from 0xc0000008 to 0xd000000a
(WW) intel(0): PP_STATUS before: on, ready, sequencing idle
(WW) intel(0): PP_STATUS after: on, ready, sequencing on
(==) Depth 24 pixmap format is 32 bpp
(II) do I need RAC? No, I don't.
(II) resource ranges after preInit:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] 0 0 0x000a0000 - 0x000affff (0x10000) MS[b](OprD)
[5] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[b](OprD)
[6] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[b](OprD)
[7] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[8] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[9] 0 0 0x000003b0 - 0x000003bb (0xc) IS[b](OprU)
[10] 0 0 0x000003c0 - 0x000003df (0x20) IS[b](OprU)
(II) intel(0): Kernel reported 488704 total, 1 used
(II) intel(0): I830CheckAvailableMemory: 1954812 kB available
(EE) intel(0): Cannot support DRI with frame buffer width > 2048.
(**) intel(0): Framebuffer compression enabled
(**) intel(0): Tiling enabled
(==) intel(0): VideoRam: 262144 KB
(II) intel(0): Attempting memory allocation with tiled buffers.
(II) intel(0): Tiled allocation successful.
(II) intel(0): adjusting plane->pipe mappings to allow for framebuffer compression
(II) intel(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000
(II) EXA(0): Offscreen pixmap area of 38141952 bytes
(II) EXA(0): Driver registered support for the following operations:
(II) Solid
(II) Copy
(II) Composite (RENDER acceleration)
(==) intel(0): Backing store disabled
(==) intel(0): Silken mouse enabled
(II) intel(0): Initializing HW Cursor
(II) intel(0): xf86BindGARTMemory: bind key 0 at 0x007bf000 (pgoffset 1983)
(II) intel(0): xf86BindGARTMemory: bind key 1 at 0x00e2b000 (pgoffset 3627)
(II) intel(0): xf86BindGARTMemory: bind key 2 at 0x00e30000 (pgoffset 3632)
(II) intel(0): xf86BindGARTMemory: bind key 3 at 0x03370000 (pgoffset 13168)
(II) intel(0): Fixed memory allocation layout:
(II) intel(0): 0x00000000-0x0001ffff: ring buffer (128 kB)
(II) intel(0): 0x00020000-0x0061ffff: compressed frame buffer (6144 kB, 0x000000007f820000 physical
)
(II) intel(0): 0x00620000-0x00620fff: compressed ll buffer (4 kB, 0x000000007fe20000 physical
)
(II) intel(0): 0x00621000-0x0062afff: HW cursors (40 kB, 0x000000007fe21000 physical
)
(II) intel(0): 0x0062b000-0x00e2afff: fake bufmgr (8192 kB)
(II) intel(0): 0x007bf000: end of stolen memory
(II) intel(0): 0x00e2b000-0x00e2bfff: overlay registers (4 kB, 0x0000000033ced000 physical
)
(II) intel(0): 0x00e30000-0x0336ffff: front buffer (38144 kB)
(II) intel(0): 0x03370000-0x057cffff: exa offscreen (37248 kB)
(II) intel(0): 0x10000000: end of aperture
(WW) intel(0): ESR is 0x00000001, instruction error
(WW) intel(0): Existing errors found in hardware state.
(II) intel(0): using SSC reference clock of 100 MHz
(II) intel(0): Selecting standard 18 bit TMDS pixel format.
(II) intel(0): Output configuration:
(II) intel(0): Pipe A is off
(II) intel(0): Display plane B is now disabled and connected to pipe A.
(II) intel(0): Pipe B is on
(II) intel(0): Display plane A is now enabled and connected to pipe B.
(II) intel(0): Output VGA is connected to pipe none
(II) intel(0): Output LVDS is connected to pipe B
(II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
(II) intel(0): DPMS enabled
(==) intel(0): Intel XvMC decoder disabled
(II) intel(0): Set up overlay video
(II) intel(0): direct rendering: Disabled
(--) RandR disabled
(II) Initializing built-in extension Generic Event Extension
(II) Initializing built-in extension SHAPE
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension BIG-REQUESTS
(II) Initializing built-in extension SYNC
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-MISC
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) AIGLX: Screen 0 is not DRI2 capable
(II) AIGLX: Screen 0 is not DRI capable
(II) AIGLX: Loaded and initialized /usr/lib/dri/swrast_dri.so
(II) GLX: Initialized DRISWRAST GL provider for screen 0
(II) intel(0): Setting screen physical size to 220 x 129
(II) config/hal: Adding input device AT Translated Set 2 keyboard
(II) LoadModule: "evdev"
(II) Loading /usr/lib/xorg/modules/input//evdev_drv.so
(II) Module evdev: vendor="X.Org Foundation"
compiled for 1.5.99.902, module version = 2.1.1
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 4.0
(**) AT Translated Set 2 keyboard: always reports core events
(**) AT Translated Set 2 keyboard: Device: "/dev/input/event5"
(II) AT Translated Set 2 keyboard: Found keys
(II) AT Translated Set 2 keyboard: Configuring as keyboard
(II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) AT Translated Set 2 keyboard: xkb_rules: "evdev"
(**) Option "xkb_model" "acpi"
(**) AT Translated Set 2 keyboard: xkb_model: "acpi"
(**) Option "xkb_layout" "ca"
(**) AT Translated Set 2 keyboard: xkb_layout: "ca"
(**) Option "xkb_variant" "multix"
(**) AT Translated Set 2 keyboard: xkb_variant: "multix"
(**) Option "xkb_options" "grp:alts_toggle"
(**) AT Translated Set 2 keyboard: xkb_options: "grp:alts_toggle"
(II) config/hal: Adding input device Video Bus
(**) Video Bus: always reports core events
(**) Video Bus: Device: "/dev/input/event6"
(II) Video Bus: Found keys
(II) Video Bus: Configuring as keyboard
(II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Video Bus: xkb_rules: "evdev"
(**) Option "xkb_model" "acpi"
(**) Video Bus: xkb_model: "acpi"
(**) Option "xkb_layout" "ca"
(**) Video Bus: xkb_layout: "ca"
(**) Option "xkb_variant" "multix"
(**) Video Bus: xkb_variant: "multix"
(**) Option "xkb_options" "grp:alts_toggle"
(**) Video Bus: xkb_options: "grp:alts_toggle"
(II) config/hal: Adding input device ImExPS/2 Generic Explorer Mouse
(**) ImExPS/2 Generic Explorer Mouse: always reports core events
(**) ImExPS/2 Generic Explorer Mouse: Device: "/dev/input/event9"
(II) ImExPS/2 Generic Explorer Mouse: Found 5 mouse buttons
(II) ImExPS/2 Generic Explorer Mouse: Found x and y relative axes
(II) ImExPS/2 Generic Explorer Mouse: Configuring as mouse
(**) ImExPS/2 Generic Explorer Mouse: YAxisMapping: buttons 4 and 5
(**) ImExPS/2 Generic Explorer Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "ImExPS/2 Generic Explorer Mouse" (type: MOUSE)
(**) ImExPS/2 Generic Explorer Mouse: (accel) keeping acceleration scheme 1
(**) ImExPS/2 Generic Explorer Mouse: (accel) filter chain progression: 2.00
(**) ImExPS/2 Generic Explorer Mouse: (accel) filter stage 0: 20.00 ms
(**) ImExPS/2 Generic Explorer Mouse: (accel) set acceleration profile 0
(II) config/hal: Adding input device Macintosh mouse button emulation
(**) Macintosh mouse button emulation: always reports core events
(**) Macintosh mouse button emulation: Device: "/dev/input/event4"
(II) Macintosh mouse button emulation: Found 3 mouse buttons
(II) Macintosh mouse button emulation: Found x and y relative axes
(II) Macintosh mouse button emulation: Configuring as mouse
(**) Macintosh mouse button emulation: YAxisMapping: buttons 4 and 5
(**) Macintosh mouse button emulation: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "Macintosh mouse button emulation" (type: MOUSE)
(**) Macintosh mouse button emulation: (accel) keeping acceleration scheme 1
(**) Macintosh mouse button emulation: (accel) filter chain progression: 2.00
(**) Macintosh mouse button emulation: (accel) filter stage 0: 20.00 ms
(**) Macintosh mouse button emulation: (accel) set acceleration profile 0
(II) intel(0): EDID vendor "HSD", prod id 1001
(II) intel(0): DDCModeFromDetailedTiming: 1024x600 Warning: We only handle separate sync.
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1024x600"x0.0 45.00 1024 1077 1112 1200 600 604 609 625 -hsync -vsync (37.5 kHz)
(II) intel(0): Modeline "1024x600"x0.0 51.42 1024 1117 1152 1240 600 617 622 638 -hsync -vsync (41.5 kHz)
(II) intel(0): EDID vendor "HSD", prod id 1001
(II) intel(0): DDCModeFromDetailedTiming: 1024x600 Warning: We only handle separate sync.
(II) intel(0): EDID vendor "HSD", prod id 1001
(II) intel(0): DDCModeFromDetailedTiming: 1024x600 Warning: We only handle separate sync.
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1024x600"x0.0 45.00 1024 1077 1112 1200 600 604 609 625 -hsync -vsync (37.5 kHz)
(II) intel(0): Modeline "1024x600"x0.0 51.42 1024 1117 1152 1240 600 617 622 638 -hsync -vsync (41.5 kHz)
(II) intel(0): EDID vendor "HSD", prod id 1001
(II) intel(0): DDCModeFromDetailedTiming: 1024x600 Warning: We only handle separate sync.
(II) intel(0): EDID vendor "HSD", prod id 1001
(II) intel(0): DDCModeFromDetailedTiming: 1024x600 Warning: We only handle separate sync.
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1024x600"x0.0 45.00 1024 1077 1112 1200 600 604 609 625 -hsync -vsync (37.5 kHz)
(II) intel(0): Modeline "1024x600"x0.0 51.42 1024 1117 1152 1240 600 617 622 638 -hsync -vsync (41.5 kHz)
(II) intel(0): EDID vendor "HSD", prod id 1001
(II) intel(0): DDCModeFromDetailedTiming: 1024x600 Warning: We only handle separate sync.
(II) intel(0): EDID vendor "HSD", prod id 1001
(II) intel(0): DDCModeFromDetailedTiming: 1024x600 Warning: We only handle separate sync.
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1024x600"x0.0 45.00 1024 1077 1112 1200 600 604 609 625 -hsync -vsync (37.5 kHz)
(II) intel(0): Modeline "1024x600"x0.0 51.42 1024 1117 1152 1240 600 617 622 638 -hsync -vsync (41.5 kHz)
(II) intel(0): EDID vendor "HSD", prod id 1001
(II) intel(0): DDCModeFromDetailedTiming: 1024x600 Warning: We only handle separate sync.
(II) intel(0): EDID vendor "HSD", prod id 1001
(II) intel(0): DDCModeFromDetailedTiming: 1024x600 Warning: We only handle separate sync.
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1024x600"x0.0 45.00 1024 1077 1112 1200 600 604 609 625 -hsync -vsync (37.5 kHz)
(II) intel(0): Modeline "1024x600"x0.0 51.42 1024 1117 1152 1240 600 617 622 638 -hsync -vsync (41.5 kHz)
(II) intel(0): EDID vendor "HSD", prod id 1001
(II) intel(0): DDCModeFromDetailedTiming: 1024x600 Warning: We only handle separate sync.
exaCopyDirty: Pending damage region empty!et dmesg
[ 0.000000] BIOS EBDA/lowmem at: 0009ec00/0009ec00
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.28-11-generic (buildd@palmer) (gcc version 4.3.3 (Ubuntu 4.3.3-5ubuntu4) ) #39-Ubuntu SMP Thu Apr 2 03:00:35 UTC 2009 (Ubuntu 2.6.28-11.39-generic)
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] NSC Geode by NSC
[ 0.000000] Cyrix CyrixInstead
[ 0.000000] Centaur CentaurHauls
[ 0.000000] Transmeta GenuineTMx86
[ 0.000000] Transmeta TransmetaCPU
[ 0.000000] UMC UMC UMC UMC
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009ec00 (usable)
[ 0.000000] BIOS-e820: 000000000009ec00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000007f5b2000 (usable)
[ 0.000000] BIOS-e820: 000000007f5b2000 - 000000007f5d5000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000007f5d5000 - 000000007f5e6000 (reserved)
[ 0.000000] BIOS-e820: 000000007f5e6000 - 000000007f5e9000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000007f5e9000 - 000000007f605000 (reserved)
[ 0.000000] BIOS-e820: 000000007f605000 - 000000007f606000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000007f606000 - 000000007f608000 (reserved)
[ 0.000000] BIOS-e820: 000000007f608000 - 000000007f611000 (ACPI data)
[ 0.000000] BIOS-e820: 000000007f611000 - 000000007f617000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000007f617000 - 000000007f700000 (reserved)
[ 0.000000] BIOS-e820: 00000000ffb00000 - 00000000ffc00000 (reserved)
[ 0.000000] BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
[ 0.000000] DMI 2.4 present.
[ 0.000000] AMI BIOS detected: BIOS may corrupt low RAM, working it around.
[ 0.000000] last_pfn = 0x7f5b2 max_arch_pfn = 0x100000
[ 0.000000] Scanning 0 areas for low memory corruption
[ 0.000000] modified physical RAM map:
[ 0.000000] modified: 0000000000000000 - 0000000000010000 (reserved)
[ 0.000000] modified: 0000000000010000 - 000000000009ec00 (usable)
[ 0.000000] modified: 000000000009ec00 - 00000000000a0000 (reserved)
[ 0.000000] modified: 00000000000e0000 - 0000000000100000 (reserved)
[ 0.000000] modified: 0000000000100000 - 000000007f5b2000 (usable)
[ 0.000000] modified: 000000007f5b2000 - 000000007f5d5000 (ACPI NVS)
[ 0.000000] modified: 000000007f5d5000 - 000000007f5e6000 (reserved)
[ 0.000000] modified: 000000007f5e6000 - 000000007f5e9000 (ACPI NVS)
[ 0.000000] modified: 000000007f5e9000 - 000000007f605000 (reserved)
[ 0.000000] modified: 000000007f605000 - 000000007f606000 (ACPI NVS)
[ 0.000000] modified: 000000007f606000 - 000000007f608000 (reserved)
[ 0.000000] modified: 000000007f608000 - 000000007f611000 (ACPI data)
[ 0.000000] modified: 000000007f611000 - 000000007f617000 (ACPI NVS)
[ 0.000000] modified: 000000007f617000 - 000000007f700000 (reserved)
[ 0.000000] modified: 00000000ffb00000 - 00000000ffc00000 (reserved)
[ 0.000000] modified: 00000000fff00000 - 0000000100000000 (reserved)
[ 0.000000] kernel direct mapping tables up to 373fe000 @ 10000-16000
[ 0.000000] RAMDISK: 378c0000 - 37fef82f
[ 0.000000] Allocated new RAMDISK: 00881000 - 00fb082f
[ 0.000000] Move RAMDISK from 00000000378c0000 - 0000000037fef82e to 00881000 - 00fb082e
[ 0.000000] ACPI: RSDP 000F03C0, 0024 (r2 MSI_NB)
[ 0.000000] ACPI: XSDT 7F60FF10, 005C (r1 MSI_NB MEGABOOK 6222004 MSFT 10013)
[ 0.000000] ACPI: FACP 7F5E6C10, 00F4 (r4 MSI_NB MEGABOOK 6222004 MSFT 10013)
[ 0.000000] ACPI: DSDT 7F608010, 53CA (r1 MSI_NB MEGABOOK 0 INTL 20051117)
[ 0.000000] ACPI: FACS 7F611D40, 0040
[ 0.000000] ACPI: APIC 7F610E90, 005C (r2 MSI_NB MEGABOOK 6222004 MSFT 10013)
[ 0.000000] ACPI: MCFG 7F615C90, 003C (r1 MSI_NB MEGABOOK 6222004 MSFT 97)
[ 0.000000] ACPI: SLIC 7F612C10, 0176 (r1 MSI_NB MEGABOOK 6222004 MSFT 97)
[ 0.000000] ACPI: SSDT 7F605510, 04CE (r2 PmRef CpuPm 3000 INTL 20051117)
[ 0.000000] ACPI: SSDT 7F5E8A10, 0232 (r2 PmRef Cpu0Tst 3000 INTL 20051117)
[ 0.000000] ACPI: SSDT 7F611A10, 00A0 (r2 PmRef Cpu1Tst 3000 INTL 20051117)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] 1153MB HIGHMEM available.
[ 0.000000] 883MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 373fe000
[ 0.000000] low ram: 00000000 - 373fe000
[ 0.000000] bootmap 00012000 - 00018e80
[ 0.000000] (9 early reservations) ==> bootmem [0000000000 - 00373fe000]
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
[ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000]
[ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000]
[ 0.000000] #3 [0000100000 - 000087c52c] TEXT DATA BSS ==> [0000100000 - 000087c52c]
[ 0.000000] #4 [000087d000 - 0000881000] INIT_PG_TABLE ==> [000087d000 - 0000881000]
[ 0.000000] #5 [000009ec00 - 0000100000] BIOS reserved ==> [000009ec00 - 0000100000]
[ 0.000000] #6 [0000010000 - 0000012000] PGTABLE ==> [0000010000 - 0000012000]
[ 0.000000] #7 [0000881000 - 0000fb082f] NEW RAMDISK ==> [0000881000 - 0000fb082f]
[ 0.000000] #8 [0000012000 - 0000019000] BOOTMAP ==> [0000012000 - 0000019000]
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] Normal 0x00001000 -> 0x000373fe
[ 0.000000] HighMem 0x000373fe -> 0x0007f5b2
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[2] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009e
[ 0.000000] 0: 0x00000100 -> 0x0007f5b2
[ 0.000000] On node 0 totalpages: 521536
[ 0.000000] free_area_init_node: node 0, pgdat c06d0f00, node_mem_map c1000200
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3950 pages, LIFO batch:0
[ 0.000000] Normal zone: 1736 pages used for memmap
[ 0.000000] Normal zone: 220470 pages, LIFO batch:31
[ 0.000000] HighMem zone: 2308 pages used for memmap
[ 0.000000] HighMem zone: 293040 pages, LIFO batch:31
[ 0.000000] Movable zone: 0 pages used for memmap
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: 000000000009e000 - 000000000009f000
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
[ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at 80000000 (gap: 7f700000:80400000)
[ 0.000000] PERCPU: Allocating 45056 bytes of per cpu data
[ 0.000000] NR_CPUS: 64, nr_cpu_ids: 2, nr_node_ids 1
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 517460
[ 0.000000] Kernel command line: root=UUID=936e44a2-18a7-4954-89b0-ddfb941424b8 ro quiet splash
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes)
[ 0.000000] Extended CMOS year: 2000
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 1600.117 MHz processor.
[ 0.004000] Console: colour VGA+ 80x25
[ 0.004000] console [tty0] enabled
[ 0.004000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.004000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.004000] allocated 10432680 bytes of page_cgroup
[ 0.004000] please try cgroup_disable=memory option if you don't want
[ 0.004000] Scanning for low memory corruption every 60 seconds
[ 0.004000] Memory: 2042768k/2086600k available (4127k kernel code, 42504k reserved, 2208k data, 532k init, 1181392k highmem)
[ 0.004000] virtual kernel memory layout:
[ 0.004000] fixmap : 0xffc77000 - 0xfffff000 (3616 kB)
[ 0.004000] pkmap : 0xff400000 - 0xff800000 (4096 kB)
[ 0.004000] vmalloc : 0xf7bfe000 - 0xff3fe000 ( 120 MB)
[ 0.004000] lowmem : 0xc0000000 - 0xf73fe000 ( 883 MB)
[ 0.004000] .init : 0xc0737000 - 0xc07bc000 ( 532 kB)
[ 0.004000] .data : 0xc0507dff - 0xc072fe60 (2208 kB)
[ 0.004000] .text : 0xc0100000 - 0xc0507dff (4127 kB)
[ 0.004000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.004000] SLUB: Genslabs=12, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.004017] spurious 8259A interrupt: IRQ7.
[ 0.004032] Calibrating delay loop (skipped), value calculated using timer frequency.. 3200.23 BogoMIPS (lpj=6400468)
[ 0.004068] Security Framework initialized
[ 0.004079] SELinux: Disabled at boot.
[ 0.004120] AppArmor: AppArmor initialized
[ 0.004136] Mount-cache hash table entries: 512
[ 0.004363] Initializing cgroup subsys ns
[ 0.004374] Initializing cgroup subsys cpuacct
[ 0.004380] Initializing cgroup subsys memory
[ 0.004389] Initializing cgroup subsys freezer
[ 0.004412] CPU: L1 I cache: 32K, L1 D cache: 24K
[ 0.004417] CPU: L2 cache: 512K
[ 0.004422] CPU: Physical Processor ID: 0
[ 0.004426] CPU: Processor Core ID: 0
[ 0.004432] using mwait in idle threads.
[ 0.004450] Checking 'hlt' instruction... OK.
[ 0.023752] ACPI: Core revision 20080926
[ 0.026062] ACPI: Checking initramfs for custom DSDT
[ 0.496515] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0
[ 0.536985] CPU0: Intel(R) Atom(TM) CPU N270 @ 1.60GHz stepping 02
[ 0.540002] Booting processor 1 APIC 0x1 ip 0x6000
[ 0.004000] Initializing CPU#1
[ 0.004000] Calibrating delay using timer specific routine.. 3200.19 BogoMIPS (lpj=6400381)
[ 0.004000] CPU: L1 I cache: 32K, L1 D cache: 24K
[ 0.004000] CPU: L2 cache: 512K
[ 0.004000] CPU: Physical Processor ID: 0
[ 0.004000] CPU: Processor Core ID: 0
[ 0.624291] CPU1: Intel(R) Atom(TM) CPU N270 @ 1.60GHz stepping 02
[ 0.624328] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
[ 0.628069] Brought up 2 CPUs
[ 0.628076] Total of 2 processors activated (6400.42 BogoMIPS).
[ 0.628140] CPU0 attaching sched-domain:
[ 0.628145] domain 0: span 0-1 level SIBLING
[ 0.628150] groups: 0 1
[ 0.628161] CPU1 attaching sched-domain:
[ 0.628165] domain 0: span 0-1 level SIBLING
[ 0.628169] groups: 1 0
[ 0.628308] net_namespace: 776 bytes
[ 0.628308] Booting paravirtualized kernel on bare hardware
[ 0.628693] Time: 18:23:01 Date: 04/02/09
[ 0.628693] regulator: core version 0.5
[ 0.628693] NET: Registered protocol family 16
[ 0.628693] EISA bus registered
[ 0.628693] ACPI: bus type pci registered
[ 0.628693] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
[ 0.628693] PCI: Not using MMCONFIG.
[ 0.714434] PCI: Using configuration type 1 for base access
[ 0.717389] ACPI: EC: Look up EC in DSDT
[ 0.724393] ACPI: BIOS _OSI(Linux) query ignored
[ 0.729268] ACPI: Interpreter enabled
[ 0.729280] ACPI: (supports S0 S1 S3 S4 S5)
[ 0.729323] ACPI: Using IOAPIC for interrupt routing
[ 0.729433] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
[ 0.729756] PCI: MCFG area at e0000000 reserved in ACPI motherboard resources
[ 0.729761] PCI: Using MMCONFIG for extended config space
[ 0.737881] ACPI: EC: non-query interrupt received, switching to interrupt mode
[ 0.738102] ACPI: EC: GPE storm detected, transactions will use polling mode
[ 0.748678] ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
[ 0.748685] ACPI: EC: driver started in interrupt mode
[ 0.748965] ACPI: No dock devices found.
[ 0.749100] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.749224] pci 0000:00:02.0: reg 10 32bit mmio: [0xdfe80000-0xdfefffff]
[ 0.749233] pci 0000:00:02.0: reg 14 io port: [0xe0f0-0xe0f7]
[ 0.749241] pci 0000:00:02.0: reg 18 32bit mmio: [0xc0000000-0xcfffffff]
[ 0.749250] pci 0000:00:02.0: reg 1c 32bit mmio: [0xdff00000-0xdff3ffff]
[ 0.749291] pci 0000:00:02.1: reg 10 32bit mmio: [0xdfe00000-0xdfe7ffff]
[ 0.749389] pci 0000:00:1b.0: reg 10 64bit mmio: [0xffe00000-0xffe03fff]
[ 0.749425] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.749432] pci 0000:00:1b.0: PME# disabled
[ 0.749486] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.749493] pci 0000:00:1c.0: PME# disabled
[ 0.749549] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.749556] pci 0000:00:1c.1: PME# disabled
[ 0.749612] pci 0000:00:1d.0: reg 20 io port: [0xe080-0xe09f]
[ 0.749668] pci 0000:00:1d.1: reg 20 io port: [0xe060-0xe07f]
[ 0.749722] pci 0000:00:1d.2: reg 20 io port: [0xe040-0xe05f]
[ 0.749782] pci 0000:00:1d.3: reg 20 io port: [0xe020-0xe03f]
[ 0.749843] pci 0000:00:1d.7: reg 10 32bit mmio: [0xdff40000-0xdff403ff]
[ 0.749887] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.749895] pci 0000:00:1d.7: PME# disabled
[ 0.750034] pci 0000:00:1f.0: Force enabled HPET at 0xfed03000
[ 0.750046] pci 0000:00:1f.0: quirk: region 0400-047f claimed by ICH6 ACPI/GPIO/TCO
[ 0.750053] pci 0000:00:1f.0: quirk: region 0500-053f claimed by ICH6 GPIO
[ 0.750096] pci 0000:00:1f.2: reg 10 io port: [0xe0e0-0xe0e7]
[ 0.750106] pci 0000:00:1f.2: reg 14 io port: [0xe0d0-0xe0d3]
[ 0.750115] pci 0000:00:1f.2: reg 18 io port: [0xe0c0-0xe0c7]
[ 0.750124] pci 0000:00:1f.2: reg 1c io port: [0xe0b0-0xe0b3]
[ 0.750133] pci 0000:00:1f.2: reg 20 io port: [0xe0a0-0xe0af]
[ 0.750156] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.750162] pci 0000:00:1f.2: PME# disabled
[ 0.750213] pci 0000:00:1f.3: reg 20 io port: [0xe000-0xe01f]
[ 0.750289] pci 0000:01:00.0: reg 10 io port: [0xd000-0xd0ff]
[ 0.750313] pci 0000:01:00.0: reg 18 64bit mmio: [0xffd10000-0xffd10fff]
[ 0.750331] pci 0000:01:00.0: reg 20 64bit mmio: [0xffd00000-0xffd0ffff]
[ 0.750343] pci 0000:01:00.0: reg 30 32bit mmio: [0xdfd00000-0xdfd0ffff]
[ 0.750359] pci 0000:01:00.0: supports D1 D2
[ 0.750363] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.750371] pci 0000:01:00.0: PME# disabled
[ 0.750432] pci 0000:00:1c.0: bridge io port: [0xd000-0xdfff]
[ 0.750439] pci 0000:00:1c.0: bridge 32bit mmio: [0xdfd00000-0xdfdfffff]
[ 0.750449] pci 0000:00:1c.0: bridge 64bit mmio pref: [0xffd00000-0xffdfffff]
[ 0.750509] pci 0000:02:00.0: reg 10 64bit mmio: [0xdfc00000-0xdfc0ffff]
[ 0.750613] pci 0000:00:1c.1: bridge 32bit mmio: [0xdfc00000-0xdfcfffff]
[ 0.750672] pci 0000:00:1e.0: transparent bridge
[ 0.750700] bus 00 -> node 0
[ 0.750712] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.751201] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT]
[ 0.751427] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P5._PRT]
[ 0.772972] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 0.773244] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[ 0.773510] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 *7 10 11 12 14 15)
[ 0.773775] ACPI: PCI Interrupt Link [LNKD] (IRQs *3 4 5 6 7 10 11 12 14 15)
[ 0.774041] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 0.774311] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 0.774585] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 0.774853] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[ 0.775367] ACPI: WMI: Mapper loaded
[ 0.775492] SCSI subsystem initialized
[ 0.775492] libata version 3.00 loaded.
[ 0.776020] usbcore: registered new interface driver usbfs
[ 0.776057] usbcore: registered new interface driver hub
[ 0.776095] usbcore: registered new device driver usb
[ 0.776142] PCI: Using ACPI for IRQ routing
[ 0.784021] Bluetooth: Core ver 2.13
[ 0.784055] NET: Registered protocol family 31
[ 0.784055] Bluetooth: HCI device and connection manager initialized
[ 0.784055] Bluetooth: HCI socket layer initialized
[ 0.784055] NET: Registered protocol family 8
[ 0.784055] NET: Registered protocol family 20
[ 0.784075] NetLabel: Initializing
[ 0.784079] NetLabel: domain hash size = 128
[ 0.784083] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.784105] NetLabel: unlabeled traffic allowed by default
[ 0.784285] hpet clockevent registered
[ 0.784292] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[ 0.784302] hpet0: at MMIO 0xfed03000, IRQs 2, 8, 0
[ 0.784314] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[ 0.788114] AppArmor: AppArmor Filesystem Enabled
[ 0.796021] pnp: PnP ACPI init
[ 0.796044] ACPI: bus type pnp registered
[ 0.801846] pnp: PnP ACPI: found 11 devices
[ 0.801852] ACPI: ACPI bus type pnp unregistered
[ 0.801859] PnPBIOS: Disabled by ACPI PNP
[ 0.801882] system 00:01: iomem range 0xfed14000-0xfed17fff has been reserved
[ 0.801889] system 00:01: iomem range 0xfed19000-0xfed19fff has been reserved
[ 0.801895] system 00:01: iomem range 0xfed18000-0xfed18fff has been reserved
[ 0.801901] system 00:01: iomem range 0xe0000000-0xefffffff has been reserved
[ 0.801918] system 00:05: ioport range 0x4d0-0x4d1 has been reserved
[ 0.801932] system 00:09: ioport range 0x400-0x47f has been reserved
[ 0.801938] system 00:09: ioport range 0x1180-0x119f has been reserved
[ 0.801944] system 00:09: ioport range 0x500-0x53f has been reserved
[ 0.801950] system 00:09: iomem range 0xfec00000-0xfec00fff has been reserved
[ 0.801956] system 00:09: iomem range 0xfee00000-0xfee00fff has been reserved
[ 0.801963] system 00:09: iomem range 0xfed20000-0xfed23fff has been reserved
[ 0.801969] system 00:09: iomem range 0xffb00000-0xffbfffff has been reserved
[ 0.801975] system 00:09: iomem range 0xfc800400-0xfc800fff has been reserved
[ 0.836898] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:01
[ 0.836905] pci 0000:00:1c.0: IO window: 0xd000-0xdfff
[ 0.836914] pci 0000:00:1c.0: MEM window: 0xdfd00000-0xdfdfffff
[ 0.836921] pci 0000:00:1c.0: PREFETCH window: 0x000000ffd00000-0x000000ffdfffff
[ 0.836932] pci 0000:00:1c.1: PCI bridge, secondary bus 0000:02
[ 0.836936] pci 0000:00:1c.1: IO window: disabled
[ 0.836943] pci 0000:00:1c.1: MEM window: 0xdfc00000-0xdfcfffff
[ 0.836950] pci 0000:00:1c.1: PREFETCH window: disabled
[ 0.836959] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:03
[ 0.836963] pci 0000:00:1e.0: IO window: disabled
[ 0.836970] pci 0000:00:1e.0: MEM window: disabled
[ 0.836976] pci 0000:00:1e.0: PREFETCH window: disabled
[ 0.837002] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.837010] pci 0000:00:1c.0: setting latency timer to 64
[ 0.837024] pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 0.837031] pci 0000:00:1c.1: setting latency timer to 64
[ 0.837041] pci 0000:00:1e.0: setting latency timer to 64
[ 0.837048] bus: 00 index 0 io port: [0x00-0xffff]
[ 0.837053] bus: 00 index 1 mmio: [0x000000-0xffffffff]
[ 0.837058] bus: 01 index 0 io port: [0xd000-0xdfff]
[ 0.837063] bus: 01 index 1 mmio: [0xdfd00000-0xdfdfffff]
[ 0.837068] bus: 01 index 2 mmio: [0xffd00000-0xffdfffff]
[ 0.837072] bus: 01 index 3 mmio: [0x0-0x0]
[ 0.837076] bus: 02 index 0 mmio: [0x0-0x0]
[ 0.837081] bus: 02 index 1 mmio: [0xdfc00000-0xdfcfffff]
[ 0.837085] bus: 02 index 2 mmio: [0x0-0x0]
[ 0.837089] bus: 02 index 3 mmio: [0x0-0x0]
[ 0.837093] bus: 03 index 0 mmio: [0x0-0x0]
[ 0.837097] bus: 03 index 1 mmio: [0x0-0x0]
[ 0.837101] bus: 03 index 2 mmio: [0x0-0x0]
[ 0.837105] bus: 03 index 3 io port: [0x00-0xffff]
[ 0.837110] bus: 03 index 4 mmio: [0x000000-0xffffffff]
[ 0.837131] NET: Registered protocol family 2
[ 0.852124] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.852663] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.853499] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.853953] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.853959] TCP reno registered
[ 0.860177] NET: Registered protocol family 1
[ 0.860406] checking if image is initramfs...<7>Switched to high resolution mode on CPU 1
[ 1.287996] Switched to high resolution mode on CPU 0
[ 1.318071] it is
[ 1.827257] Freeing initrd memory: 7358k freed
[ 1.827665] cpufreq: No nForce2 chipset.
[ 1.827925] audit: initializing netlink socket (disabled)
[ 1.827964] type=2000 audit(1238696581.825:1): initialized
[ 1.842273] highmem bounce pool size: 64 pages
[ 1.842288] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 1.845082] VFS: Disk quotas dquot_6.5.1
[ 1.845208] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 1.846516] fuse init (API version 7.10)
[ 1.846692] msgmni has been set to 1698
[ 1.847047] alg: No test for stdrng (krng)
[ 1.847079] io scheduler noop registered
[ 1.847084] io scheduler anticipatory registered
[ 1.847088] io scheduler deadline registered
[ 1.847129] io scheduler cfq registered (default)
[ 1.847154] pci 0000:00:02.0: Boot video device
[ 1.855078] pcieport-driver 0000:00:1c.0: setting latency timer to 64
[ 1.855121] pcieport-driver 0000:00:1c.0: found MSI capability
[ 1.855156] pcieport-driver 0000:00:1c.0: irq 2303 for MSI/MSI-X
[ 1.855172] pci_express 0000:00:1c.0:pcie00: allocate port service
[ 1.855207] pci_express 0000:00:1c.0:pcie02: allocate port service
[ 1.855234] pci_express 0000:00:1c.0:pcie03: allocate port service
[ 1.855310] pcieport-driver 0000:00:1c.1: setting latency timer to 64
[ 1.855350] pcieport-driver 0000:00:1c.1: found MSI capability
[ 1.855380] pcieport-driver 0000:00:1c.1: irq 2302 for MSI/MSI-X
[ 1.855396] pci_express 0000:00:1c.1:pcie00: allocate port service
[ 1.855424] pci_express 0000:00:1c.1:pcie02: allocate port service
[ 1.855457] pci_express 0000:00:1c.1:pcie03: allocate port service
[ 1.855566] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 1.856830] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 1.860358] ACPI: AC Adapter [ADP1] (on-line)
[ 2.360020] ACPI: EC: missing confirmations, switch off interrupt mode.
[ 2.492161] ACPI: Battery Slot [BAT1] (battery present)
[ 2.492311] input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
[ 2.492317] ACPI: Power Button (FF) [PWRF]
[ 2.492424] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:11/PNP0C09:00/PNP0C0D:00/input/input1
[ 2.494716] ACPI: Lid Switch [LID0]
[ 2.494830] input: Power Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2
[ 2.494836] ACPI: Power Button (CM) [PWRB]
[ 2.494932] input: Sleep Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input3
[ 2.494938] ACPI: Sleep Button (CM) [SLPB]
[ 2.496071] ACPI: SSDT 7F5E8C90, 0253 (r2 PmRef Cpu0Ist 3000 INTL 20051117)
[ 2.496726] ACPI: SSDT 7F5E7690, 0653 (r2 PmRef Cpu0Cst 3001 INTL 20051117)
[ 2.501602] Monitor-Mwait will be used to enter C-1 state
[ 2.501611] Monitor-Mwait will be used to enter C-2 state
[ 2.501618] Monitor-Mwait will be used to enter C-3 state
[ 2.501655] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
[ 2.501720] processor ACPI_CPU:00: registered as cooling_device0
[ 2.501731] ACPI: Processor [CPU0] (supports 8 throttling states)
[ 2.502551] ACPI: SSDT 7F5E8F10, 00D0 (r2 PmRef Cpu1Ist 3000 INTL 20051117)
[ 2.503338] ACPI: SSDT 7F611B10, 0083 (r2 PmRef Cpu1Cst 3000 INTL 20051117)
[ 2.522222] ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3])
[ 2.522267] processor ACPI_CPU:01: registered as cooling_device1
[ 2.522277] ACPI: Processor [CPU1] (supports 8 throttling states)
[ 2.530322] thermal LNXTHERM:01: registered as thermal_zone0
[ 2.535343] ACPI: Thermal Zone [THRM] (62 C)
[ 2.535437] isapnp: Scanning for PnP cards...
[ 2.888406] isapnp: No Plug & Play device found
[ 2.901503] Serial: 8250/16550 driver4 ports, IRQ sharing enabled
[ 2.903400] brd: module loaded
[ 2.904062] loop: module loaded
[ 2.904214] Fixed MDIO Bus: probed
[ 2.904226] PPP generic driver version 2.4.2
[ 2.904360] input: Macintosh mouse button emulation as /devices/virtual/input/input4
[ 2.904424] Driver 'sd' needs updating - please use bus_type methods
[ 2.904444] Driver 'sr' needs updating - please use bus_type methods
[ 2.904604] ata_piix 0000:00:1f.2: version 2.12
[ 2.904631] ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 2.904638] ata_piix 0000:00:1f.2: MAP [ P0 P2 IDE IDE ]
[ 3.056034] ata_piix 0000:00:1f.2: setting latency timer to 64
[ 3.056173] scsi0 : ata_piix
[ 3.056376] scsi1 : ata_piix
[ 3.056459] ata1: SATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xe0a0 irq 14
[ 3.056465] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xe0a8 irq 15
[ 3.268294] ata1.00: ATA-8: WDC WD1600BEVT-22ZCT0, 11.01A11, max UDMA/133
[ 3.268301] ata1.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 3.284949] ata1.00: configured for UDMA/133
[ 3.440275] scsi 0:0:0:0: Direct-Access ATA WDC WD1600BEVT-2 11.0 PQ: 0 ANSI: 5
[ 3.440478] sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors: (160 GB/149 GiB)
[ 3.440520] sd 0:0:0:0: [sda] Write Protect is off
[ 3.440526] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 3.440596] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 3.440744] sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors: (160 GB/149 GiB)
[ 3.440784] sd 0:0:0:0: [sda] Write Protect is off
[ 3.440789] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 3.440858] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 3.440867] sda: sda1 sda2 sda3 sda4 < sda5 sda6 >
[ 3.499936] sd 0:0:0:0: [sda] Attached SCSI disk
[ 3.500067] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 3.501476] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 3.501525] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 3.501569] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 3.501575] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 3.501689] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
[ 3.505600] ehci_hcd 0000:00:1d.7: debug port 1
[ 3.505609] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[ 3.505640] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xdff40000
[ 3.520016] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 3.520171] usb usb1: configuration #1 chosen from 1 choice
[ 3.520230] hub 1-0:1.0: USB hub found
[ 3.520246] hub 1-0:1.0: 8 ports detected
[ 3.520467] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 3.520508] uhci_hcd: USB Universal Host Controller Interface driver
[ 3.520580] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 3.520592] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 3.520598] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 3.520686] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 3.520719] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000e080
[ 3.520876] usb usb2: configuration #1 chosen from 1 choice
[ 3.520930] hub 2-0:1.0: USB hub found
[ 3.520945] hub 2-0:1.0: 2 ports detected
[ 3.521118] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 3.521129] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 3.521135] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 3.521225] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[ 3.521269] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000e060
[ 3.521415] usb usb3: configuration #1 chosen from 1 choice
[ 3.521474] hub 3-0:1.0: USB hub found
[ 3.521488] hub 3-0:1.0: 2 ports detected
[ 3.521653] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 3.521663] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 3.521669] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 3.521754] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[ 3.521795] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000e040
[ 3.521946] usb usb4: configuration #1 chosen from 1 choice
[ 3.521999] hub 4-0:1.0: USB hub found
[ 3.522013] hub 4-0:1.0: 2 ports detected
[ 3.522176] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16
[ 3.522187] uhci_hcd 0000:00:1d.3: setting latency timer to 64
[ 3.522192] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[ 3.522277] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
[ 3.522321] uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000e020
[ 3.522465] usb usb5: configuration #1 chosen from 1 choice
[ 3.522518] hub 5-0:1.0: USB hub found
[ 3.522532] hub 5-0:1.0: 2 ports detected
[ 3.522794] usbcore: registered new interface driver libusual
[ 3.522862] usbcore: registered new interface driver usbserial
[ 3.522884] USB Serial support registered for generic
[ 3.522916] usbcore: registered new interface driver usbserial_generic
[ 3.522921] usbserial: USB Serial Driver core
[ 3.523005] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
[ 3.541729] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 3.541742] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 3.544086] mice: PS/2 mouse device common for all mice
[ 3.564135] rtc_cmos 00:04: RTC can wake from S4
[ 3.564202] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
[ 3.564239] rtc0: alarms up to one year, y3k, 114 bytes nvram, hpet irqs
[ 3.564383] device-mapper: uevent: version 1.0.3
[ 3.564594] device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-devel@redhat.com
[ 3.564778] device-mapper: multipath: version 1.0.5 loaded
[ 3.564784] device-mapper: multipath round-robin: version 1.0.0 loaded
[ 3.564977] EISA: Probing bus 0 at eisa.0
[ 3.565019] EISA: Detected 0 cards.
[ 3.565294] cpuidle: using governor ladder
[ 3.565528] cpuidle: using governor menu
[ 3.566662] TCP cubic registered
[ 3.566917] NET: Registered protocol family 10
[ 3.567363] Marking TSC unstable due to TSC halts in idle
[ 3.567807] lo: Disabled Privacy Extensions
[ 3.568509] NET: Registered protocol family 17
[ 3.568551] Bluetooth: L2CAP ver 2.11
[ 3.568555] Bluetooth: L2CAP socket layer initialized
[ 3.568560] Bluetooth: SCO (Voice Link) ver 0.6
[ 3.568564] Bluetooth: SCO socket layer initialized
[ 3.568654] Bluetooth: RFCOMM socket layer initialized
[ 3.568668] Bluetooth: RFCOMM TTY layer initialized
[ 3.568672] Bluetooth: RFCOMM ver 1.10
[ 3.570020] Using IPI No-Shortcut mode
[ 3.570196] registered taskstats version 1
[ 3.570411] Magic number: 5:867:391
[ 3.570426] hub 3-0:1.0: hash matches
[ 3.570528] rtc_cmos 00:04: setting system clock to 2009-04-02 18:23:04 UTC (1238696584)
[ 3.570536] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 3.570541] EDD information not available.
[ 3.570983] Freeing unused kernel memory: 532k freed
[ 3.571282] Write protecting the kernel text: 4128k
[ 3.571385] Write protecting the kernel read-only data: 1532k
[ 3.576165] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input5
[ 3.833040] usb 1-5: new high speed USB device using ehci_hcd and address 2
[ 4.161355] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 4.161391] r8169 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 4.161417] r8169 0000:01:00.0: setting latency timer to 64
[ 4.161566] r8169 0000:01:00.0: irq 2301 for MSI/MSI-X
[ 4.163017] eth0: RTL8102e at 0xf7c54000, 00:21:85:51:69:e2, XID 34a00000 IRQ 2301
[ 4.246093] usb 1-5: configuration #1 chosen from 1 choice
[ 4.394406] usb 1-6: new high speed USB device using ehci_hcd and address 3
[ 4.539350] usb 1-6: configuration #1 chosen from 1 choice
[ 4.552112] Initializing USB Mass Storage driver...
[ 4.555918] scsi2 : SCSI emulation for USB Mass Storage devices
[ 4.557414] usbcore: registered new interface driver usb-storage
[ 4.557426] USB Mass Storage support registered.
[ 4.557624] usb-storage: device found at 3
[ 4.557630] usb-storage: waiting for device to settle before scanning
[ 5.134874] PM: Starting manual resume from disk
[ 5.134882] PM: Resume from partition 8:3
[ 5.134885] PM: Checking hibernation image.
[ 5.135201] PM: Resume from disk failed.
[ 5.174321] kjournald starting. Commit interval 5 seconds
[ 5.174366] EXT3-fs: mounted filesystem with ordered data mode.
[ 5.284052] Clocksource tsc unstable (delta = -66219429 ns)
[ 9.556509] usb-storage: device scan complete
[ 9.558563] scsi 2:0:0:0: Direct-Access Generic- Multi-Card 1.00 PQ: 0 ANSI: 0 CCS
[ 9.561578] sd 2:0:0:0: [sdb] Attached SCSI removable disk
[ 9.561687] sd 2:0:0:0: Attached scsi generic sg1 type 0
[ 11.740666] udev: starting version 140
[ 12.136981] acpi device:1c: registered as cooling_device2
[ 12.137311] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:1a/input/input6
[ 12.145084] atkbd.c: Unknown key pressed (translated set 2, code 0xf7 on isa0060/serio0).
[ 12.145094] atkbd.c: Use 'setkeycodes e077 <keycode>' to make it known.
[ 12.148787] atkbd.c: Unknown key released (translated set 2, code 0xf7 on isa0060/serio0).
[ 12.148798] atkbd.c: Use 'setkeycodes e077 <keycode>' to make it known.
[ 12.156486] ACPI: Video Device [IGD] (multi-head: yes rom: no post: no)
[ 12.170096] ath_hal: module license 'Proprietary' taints kernel.
[ 12.174336] ath_hal: 0.9.18.0 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413)
[ 12.218194] wlan: 0.9.4
[ 12.241035] ath_pci: 0.9.4
[ 12.241117] ath_pci 0000:02:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 12.241137] ath_pci 0000:02:00.0: setting latency timer to 64
[ 12.754024] ath_rate_sample: 1.2 (0.9.4)
[ 12.756614] wifi0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps
[ 12.756629] wifi0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
[ 12.756650] wifi0: turboG rates: 6Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
[ 12.756664] wifi0: H/W encryption support: WEP AES AES_CCM TKIP
[ 12.756673] wifi0: mac 10.1 phy 6.1 radio 10.2
[ 12.756685] wifi0: Use hw queue 1 for WME_AC_BE traffic
[ 12.756689] wifi0: Use hw queue 0 for WME_AC_BK traffic
[ 12.756693] wifi0: Use hw queue 2 for WME_AC_VI traffic
[ 12.756698] wifi0: Use hw queue 3 for WME_AC_VO traffic
[ 12.756702] wifi0: Use hw queue 8 for CAB traffic
[ 12.756705] wifi0: Use hw queue 9 for beacons
[ 12.848279] intel_rng: FWH not detected
[ 13.130107] Linux agpgart interface v0.103
[ 13.510715] input: PC Speaker as /devices/platform/pcspkr/input/input7
[ 13.527068] wifi0: Atheros 5424/2424: mem=0xdfc00000, irq=17
[ 13.658027] Linux video capture interface: v2.00
[ 13.720948] agpgart-intel 0000:00:00.0: Intel 945GME Chipset
[ 13.721269] agpgart-intel 0000:00:00.0: detected 7932K stolen memory
[ 13.724178] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xc0000000
[ 13.740699] iTCO_vendor_support: vendor-support=0
[ 13.744462] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.05
[ 13.744670] iTCO_wdt: Found a ICH7-M or ICH7-U TCO device (Version=2, TCOBASE=0x0460)
[ 13.744796] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 13.836246] uvcvideo: Found UVC 1.00 device BisonCam, NB Pro (5986:0203)
[ 13.841520] input: BisonCam, NB Pro as /devices/pci0000:00/0000:00:1d.7/usb1/1-5/1-5:1.0/input/input8
[ 13.856148] usbcore: registered new interface driver uvcvideo
[ 13.856252] USB Video Class driver (v0.1.0)
[ 13.917829] synaptics was reset on resume, see synaptics_resume_reset if you have trouble on resume
[ 13.994702] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 13.994831] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 14.423700] lp: driver loaded but no devices found
[ 14.507553] psmouse serio1: ID: 10 00 64<6>Adding 4096564k swap on /dev/sda3. Priority:-1 extents:1 across:4096564k
[ 15.186347] input: ImExPS/2 Generic Explorer Mouse as /devices/platform/i8042/serio1/input/input9
[ 15.274245] EXT3 FS on sda6, internal journal
[ 16.355805] kjournald starting. Commit interval 5 seconds
[ 16.356330] EXT3 FS on sda5, internal journal
[ 16.356348] EXT3-fs: mounted filesystem with ordered data mode.
[ 16.836545] type=1505 audit(1238710997.762:2): operation="profile_load" name="/usr/share/gdm/guest-session/Xsession" name2="default" pid=1886
[ 16.962199] type=1505 audit(1238710997.890:3): operation="profile_load" name="/sbin/dhclient-script" name2="default" pid=1890
[ 16.962484] type=1505 audit(1238710997.890:4): operation="profile_load" name="/sbin/dhclient3" name2="default" pid=1890
[ 16.962593] type=1505 audit(1238710997.890:5): operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" name2="default" pid=1890
[ 16.962696] type=1505 audit(1238710997.890:6): operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" name2="default" pid=1890
[ 17.278657] type=1505 audit(1238710998.206:7): operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" name2="default" pid=1895
[ 17.279071] type=1505 audit(1238710998.206:8): operation="profile_load" name="/usr/sbin/cupsd" name2="default" pid=1895
[ 17.348288] type=1505 audit(1238710998.277:9): operation="profile_load" name="/usr/sbin/tcpdump" name2="default" pid=1900
[ 23.588856] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 23.588874] Bluetooth: BNEP filters: protocol multicast
[ 23.642042] Bridge firewalling registered
[ 25.853624] ppdev: user-space parallel port driver
[ 26.441138] atkbd.c: Unknown key pressed (translated set 2, code 0xf7 on isa0060/serio0).
[ 26.441146] atkbd.c: Use 'setkeycodes e077 <keycode>' to make it known.
[ 26.444889] atkbd.c: Unknown key released (translated set 2, code 0xf7 on isa0060/serio0).
[ 26.444896] atkbd.c: Use 'setkeycodes e077 <keycode>' to make it known.
[ 27.483825] atkbd.c: Unknown key pressed (translated set 2, code 0xf8 on isa0060/serio0).
[ 27.483835] atkbd.c: Use 'setkeycodes e078 <keycode>' to make it known.
[ 27.487670] atkbd.c: Unknown key released (translated set 2, code 0xf8 on isa0060/serio0).
[ 27.487679] atkbd.c: Use 'setkeycodes e078 <keycode>' to make it known.
[ 28.030495] atkbd.c: Unknown key pressed (translated set 2, code 0xf7 on isa0060/serio0).
[ 28.030503] atkbd.c: Use 'setkeycodes e077 <keycode>' to make it known.
[ 28.033823] atkbd.c: Unknown key released (translated set 2, code 0xf7 on isa0060/serio0).
[ 28.033830] atkbd.c: Use 'setkeycodes e077 <keycode>' to make it known.
[ 28.785409] atkbd.c: Unknown key pressed (translated set 2, code 0xf8 on isa0060/serio0).
[ 28.785424] atkbd.c: Use 'setkeycodes e078 <keycode>' to make it known.
[ 28.789049] atkbd.c: Unknown key released (translated set 2, code 0xf8 on isa0060/serio0).
[ 28.789056] atkbd.c: Use 'setkeycodes e078 <keycode>' to make it known.
[ 30.071616] r8169: eth0: link down
[ 30.072181] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 40.452081] ath0: no IPv6 routers present
[ 148.651800] atkbd.c: Unknown key pressed (translated set 2, code 0xf7 on isa0060/serio0).
[ 148.651810] atkbd.c: Use 'setkeycodes e077 <keycode>' to make it known.
[ 148.655213] atkbd.c: Unknown key released (translated set 2, code 0xf7 on isa0060/serio0).
[ 148.655222] atkbd.c: Use 'setkeycodes e077 <keycode>' to make it known.
[ 149.574712] atkbd.c: Unknown key pressed (translated set 2, code 0xf8 on isa0060/serio0).
[ 149.574722] atkbd.c: Use 'setkeycodes e078 <keycode>' to make it known.
[ 149.578410] atkbd.c: Unknown key released (translated set 2, code 0xf8 on isa0060/serio0).
[ 149.578420] atkbd.c: Use 'setkeycodes e078 <keycode>' to make it known.
[ 151.930774] atkbd.c: Unknown key pressed (translated set 2, code 0xf7 on isa0060/serio0).
[ 151.930782] atkbd.c: Use 'setkeycodes e077 <keycode>' to make it known.
[ 151.934233] atkbd.c: Unknown key released (translated set 2, code 0xf7 on isa0060/serio0).
[ 151.934240] atkbd.c: Use 'setkeycodes e077 <keycode>' to make it known.
[ 152.975778] atkbd.c: Unknown key pressed (translated set 2, code 0xf8 on isa0060/serio0).
[ 152.975786] atkbd.c: Use 'setkeycodes e078 <keycode>' to make it known.
[ 152.979573] atkbd.c: Unknown key released (translated set 2, code 0xf8 on isa0060/serio0).
[ 152.979580] atkbd.c: Use 'setkeycodes e078 <keycode>' to make it known.
[ 153.382835] atkbd.c: Unknown key pressed (translated set 2, code 0xf7 on isa0060/serio0).
[ 153.382850] atkbd.c: Use 'setkeycodes e077 <keycode>' to make it known.
[ 153.386549] atkbd.c: Unknown key released (translated set 2, code 0xf7 on isa0060/serio0).
[ 153.386564] atkbd.c: Use 'setkeycodes e077 <keycode>' to make it known.
[ 154.078753] atkbd.c: Unknown key pressed (translated set 2, code 0xf8 on isa0060/serio0).
[ 154.078768] atkbd.c: Use 'setkeycodes e078 <keycode>' to make it known.
[ 154.082224] atkbd.c: Unknown key released (translated set 2, code 0xf8 on isa0060/serio0).
[ 154.082237] atkbd.c: Use 'setkeycodes e078 <keycode>' to make it known.Hors ligne
#4 Le 03/04/2009, à 00:59
- ljere
Re : X redémarre après lecture d'un avi
moi j'aurai regarder du coté de gstreamer
gstreamer-propertiesancien PC Toshiba satellite_c670d-11 / Linux Mint 21 Vanessa
Nouveau PC ASUS TUF GAMING A17 GPU RTX 4070 CPU AMD Ryzen 9 7940HS w/ Radeon 780M Graphics / Linux Mint 21.2 Victoria / Kernel: 6.4.8-1-liquorix / Desktop: Cinnamon
Hors ligne
#5 Le 03/04/2009, à 01:18
- ramoul
Re : X redémarre après lecture d'un avi
On se rapproche...
quand je tape: gstreamer-properties
J'ai déjà ça:
gstreamer-properties-Message: Skipping unavailable plugin 'artsdsink'
gstreamer-properties-Message: Skipping unavailable plugin 'esdsink'
gstreamer-properties-Message: Skipping unavailable plugin 'glimagesink'
gstreamer-properties-Message: Skipping unavailable plugin 'sdlvideosink'
gstreamer-properties-Message: Skipping unavailable plugin 'v4lmjpegsrc'
gstreamer-properties-Message: Skipping unavailable plugin 'qcamsrc'
gstreamer-properties-Message: Skipping unavailable plugin 'esdmon'
et dans l'onglet vidéo si je test la sortie vidéo par défaut X redémarre!
Avec l'option d'autodétection je n'ai pas la fenêtre de test si je click sur "test" par contre je l'ai si je sélectionne "X window system/no Xv" (d'ailleurs qu'est-ce-que ça veut dire?)
Malheureusement X redémarre toujours même si je sélectionne ce mode...
Dernière modification par ramoul (Le 03/04/2009, à 01:27)
Hors ligne
#6 Le 03/04/2009, à 14:32
- ramoul
Re : X redémarre après lecture d'un avi
J'ai réussi à contourner le problème !
J'utilise parfois mon ordi (MSI Wind U100) pour voir des vidéo sur ma TV, quand je me suis branché la première fois, l'application des gestions des écrans m'a proposer de changer mon Xorg.conf. Ce qui a donné ce fichier :
# xorg.conf (X.Org X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the xorg.conf manual page.
# (Type "man xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# Note that some configuration settings that could be done previously
# in this file, now are automatically configured by the server and settings
# here are ignored.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
# sudo dpkg-reconfigure -phigh xserver-xorg
Section "Monitor"
Identifier "Configured Monitor"
EndSection
Section "Screen"
Identifier "Default Screen"
Monitor "Configured Monitor"
Device "Configured Video Device"
SubSection "Display"
Virtual 2384 768
EndSubSection
EndSection
Section "Device"
Identifier "Configured Video Device"
EndSectionEn enlevant tout ce qui n'est pas en commentaire je résous le problème, mais ne le comprends pas...
Savez vous ce que veulent dire ces lignes supplémentaires?
D'ailleurs la résolution de ma TV est 1380 (ou 1384?)*768 et non "2384 768"
merci
Hors ligne
#7 Le 03/04/2009, à 23:09
- ljere
Re : X redémarre après lecture d'un avi
tu devrai refaire un
sudo dpkg-reconfigure -phigh xserver-xorg
ca devrait reinitialiser ton xorg
ancien PC Toshiba satellite_c670d-11 / Linux Mint 21 Vanessa
Nouveau PC ASUS TUF GAMING A17 GPU RTX 4070 CPU AMD Ryzen 9 7940HS w/ Radeon 780M Graphics / Linux Mint 21.2 Victoria / Kernel: 6.4.8-1-liquorix / Desktop: Cinnamon
Hors ligne
Pages : 1