Pages : 1
#1 Le 04/05/2009, à 22:55
- lorap1
[9.04] Bureau mort [résolu]
Bonsoir.
J'ai un bureau qui refuse de laisser voir quoi que ce soit (icône, téléchargements).
J'ai également tout le menu Raccourci qui refuse d'ouvrir les documents, etc.
Que se passe-t-il?
Dernière modification par lorap1 (Le 06/05/2009, à 08:49)
Ubuntu - Version 18.04 ;
X550CC (ASUS-NotebookSKU) ; Intel(R) Core(TM) i3-3217U CPU ; MT7630e 802.11bgn Wireless Netw ; RTL8111/8168/8411 PCI Express G; 1TB ST1000LM024 HN-M;
Hors ligne
#2 Le 05/05/2009, à 06:57
- lorap1
Re : [9.04] Bureau mort [résolu]
Je mets le journal depuis mon redémarrage de ce matin ; si ça peut être utile...
May 5 06:16:17 bruno-desktop syslogd 1.5.0#5ubuntu3: restart.
May 5 06:16:17 bruno-desktop kernel: Inspecting /boot/System.map-2.6.28-11-generic
May 5 06:16:17 bruno-desktop kernel: Cannot find map file.
May 5 06:16:17 bruno-desktop kernel: Loaded 53986 symbols from 51 modules.
May 5 06:16:17 bruno-desktop kernel: [ 0.000000] BIOS EBDA/lowmem at: 0009fc00/0009fc00
May 5 06:16:17 bruno-desktop kernel: [ 0.000000] Initializing cgroup subsys cpuset
May 5 06:16:17 bruno-desktop kernel: [ 0.000000] Initializing cgroup subsys cpu
May 5 06:16:17 bruno-desktop kernel: [ 0.000000] Linux version 2.6.28-11-generic (buildd@palmer) (gcc version 4.3.3 (Ubuntu 4.3.3-5ubuntu4) ) #42-Ubuntu SMP Fri Apr 17 01:57:59 UTC 2009 (Ubuntu 2.6.28-11.42-generic)
May 5 06:16:17 bruno-desktop kernel: [ 0.000000] KERNEL supported cpus:
May 5 06:16:17 bruno-desktop kernel: [ 0.000000] Intel GenuineIntel
May 5 06:16:17 bruno-desktop kernel: [ 0.000000] AMD AuthenticAMD
May 5 06:16:17 bruno-desktop kernel: [ 0.000000] NSC Geode by NSC
May 5 06:16:17 bruno-desktop kernel: [ 0.000000] Cyrix CyrixInstead
May 5 06:16:17 bruno-desktop kernel: [ 0.000000] Centaur CentaurHauls
May 5 06:16:17 bruno-desktop kernel: [ 0.000000] Transmeta GenuineTMx86
May 5 06:16:17 bruno-desktop kernel: [ 0.000000] Transmeta TransmetaCPU
May 5 06:16:17 bruno-desktop kernel: [ 0.000000] UMC UMC UMC UMC
May 5 06:16:17 bruno-desktop kernel: [ 0.000000] BIOS-provided physical RAM map:
May 5 06:16:17 bruno-desktop kernel: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
May 5 06:16:17 bruno-desktop kernel: [ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
May 5 06:16:17 bruno-desktop kernel: [ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
May 5 06:16:17 bruno-desktop kernel: [ 0.000000] BIOS-e820: 0000000000100000 - 000000001fffc000 (usable)
May 5 06:16:17 bruno-desktop kernel: [ 0.000000] BIOS-e820: 000000001fffc000 - 000000001ffff000 (ACPI data)
May 5 06:16:17 bruno-desktop kernel: [ 0.000000] BIOS-e820: 000000001ffff000 - 0000000020000000 (ACPI NVS)
May 5 06:16:17 bruno-desktop kernel: [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
May 5 06:16:17 bruno-desktop kernel: [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
May 5 06:16:17 bruno-desktop kernel: [ 0.000000] BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
May 5 06:16:17 bruno-desktop kernel: [ 0.000000] DMI 2.3 present.
May 5 06:16:17 bruno-desktop kernel: [ 0.000000] last_pfn = 0x1fffc max_arch_pfn = 0x100000
May 5 06:16:17 bruno-desktop kernel: [ 0.000000] Scanning 2 areas for low memory corruption
May 5 06:16:17 bruno-desktop kernel: [ 0.000000] modified physical RAM map:
May 5 06:16:17 bruno-desktop kernel: [ 0.000000] modified: 0000000000000000 - 0000000000002000 (usable)
May 5 06:16:17 bruno-desktop kernel: [ 0.000000] modified: 0000000000002000 - 0000000000006000 (reserved)
May 5 06:16:17 bruno-desktop kernel: [ 0.000000] modified: 0000000000006000 - 0000000000007000 (usable)
May 5 06:16:17 bruno-desktop kernel: [ 0.000000] modified: 0000000000007000 - 0000000000010000 (reserved)
May 5 06:16:17 bruno-desktop kernel: [ 0.000000] modified: 0000000000010000 - 0000000000092c00 (usable)
May 5 06:16:17 bruno-desktop kernel: [ 0.000000] modified: 000000000009fc00 - 00000000000a0000 (reserved)
May 5 06:16:17 bruno-desktop kernel: [ 0.000000] modified: 00000000000f0000 - 0000000000100000 (reserved)
May 5 06:16:17 bruno-desktop kernel: [ 0.000000] modified: 0000000000100000 - 000000001fffc000 (usable)
May 5 06:16:17 bruno-desktop kernel: [ 0.000000] modified: 000000001fffc000 - 000000001ffff000 (ACPI data)
May 5 06:16:17 bruno-desktop kernel: [ 0.000000] modified: 000000001ffff000 - 0000000020000000 (ACPI NVS)
May 5 06:16:17 bruno-desktop kernel: [ 0.000000] modified: 00000000fec00000 - 00000000fec01000 (reserved)
May 5 06:16:17 bruno-desktop kernel: [ 0.000000] modified: 00000000fee00000 - 00000000fee01000 (reserved)
May 5 06:16:17 bruno-desktop kernel: [ 0.000000] modified: 00000000ffff0000 - 0000000100000000 (reserved)
May 5 06:16:17 bruno-desktop kernel: [ 0.000000] RAMDISK: 1f8bd000 - 1ffebe7a
May 5 06:16:17 bruno-desktop kernel: [ 0.000000] ACPI: RSDP 000F5E20, 0014 (r0 ASUS )
May 5 06:16:17 bruno-desktop kernel: [ 0.000000] ACPI: RSDT 1FFFC000, 0030 (r1 ASUS A7V8X-X 42302E31 MSFT 31313031)
May 5 06:16:17 bruno-desktop kernel: [ 0.000000] ACPI: FACP 1FFFC0B2, 0074 (r1 ASUS A7V8X-X 42302E31 MSFT 31313031)
May 5 06:16:17 bruno-desktop kernel: [ 0.000000] ACPI: DSDT 1FFFC126, 2A13 (r1 ASUS A7V8X-X 1000 MSFT 100000B)
May 5 06:16:17 bruno-desktop kernel: [ 0.000000] ACPI: FACS 1FFFF000, 0040
May 5 06:16:17 bruno-desktop kernel: [ 0.000000] ACPI: BOOT 1FFFC030, 0028 (r1 ASUS A7V8X-X 42302E31 MSFT 31313031)
May 5 06:16:17 bruno-desktop kernel: [ 0.000000] ACPI: APIC 1FFFC058, 005A (r1 ASUS A7V8X-X 42302E31 MSFT 31313031)
May 5 06:16:17 bruno-desktop kernel: [ 0.000000] 0MB HIGHMEM available.
May 5 06:16:17 bruno-desktop kernel: [ 0.000000] 511MB LOWMEM available.
May 5 06:16:17 bruno-desktop kernel: [ 0.000000] mapped low ram: 0 - 1fffc000
May 5 06:16:17 bruno-desktop kernel: [ 0.000000] low ram: 00000000 - 1fffc000
May 5 06:16:17 bruno-desktop kernel: [ 0.000000] bootmap 00012000 - 00016000
May 5 06:16:17 bruno-desktop kernel: [ 0.000000] (9 early reservations) ==> bootmem [0000000000 - 001fffc000]
May 5 06:16:17 bruno-desktop kernel: [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
May 5 06:16:17 bruno-desktop kernel: [ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000]
May 5 06:16:17 bruno-desktop kernel: [ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000]
May 5 06:16:17 bruno-desktop kernel: [ 0.000000] #3 [0000100000 - 000087c52c] TEXT DATA BSS ==> [0000100000 - 000087c52c]
May 5 06:16:17 bruno-desktop kernel: [ 0.000000] #4 [001f8bd000 - 001ffebe7a] RAMDISK ==> [001f8bd000 - 001ffebe7a]
May 5 06:16:17 bruno-desktop kernel: [ 0.000000] #5 [000087d000 - 0000881000] INIT_PG_TABLE ==> [000087d000 - 0000881000]
May 5 06:16:17 bruno-desktop kernel: [ 0.000000] #6 [000009fc00 - 0000100000] BIOS reserved ==> [000009fc00 - 0000100000]
May 5 06:16:17 bruno-desktop kernel: [ 0.000000] #7 [0000010000 - 0000012000] PGTABLE ==> [0000010000 - 0000012000]
May 5 06:16:17 bruno-desktop kernel: [ 0.000000] #8 [0000012000 - 0000016000] BOOTMAP ==> [0000012000 - 0000016000]
May 5 06:16:17 bruno-desktop kernel: [ 0.000000] Zone PFN ranges:
May 5 06:16:17 bruno-desktop kernel: [ 0.000000] DMA 0x00000000 -> 0x00001000
May 5 06:16:17 bruno-desktop kernel: [ 0.000000] Normal 0x00001000 -> 0x0001fffc
May 5 06:16:17 bruno-desktop kernel: [ 0.000000] HighMem 0x0001fffc -> 0x0001fffc
May 5 06:16:17 bruno-desktop kernel: [ 0.000000] Movable zone start PFN for each node
May 5 06:16:17 bruno-desktop kernel: [ 0.000000] early_node_map[4] active PFN ranges
May 5 06:16:17 bruno-desktop kernel: [ 0.000000] 0: 0x00000000 -> 0x00000002
May 5 06:16:17 bruno-desktop kernel: [ 0.000000] 0: 0x00000006 -> 0x00000007
May 5 06:16:17 bruno-desktop kernel: [ 0.000000] 0: 0x00000010 -> 0x00000092
May 5 06:16:17 bruno-desktop kernel: [ 0.000000] 0: 0x00000100 -> 0x0001fffc
May 5 06:16:17 bruno-desktop kernel: [ 0.000000] ACPI: PM-Timer IO Port: 0xe408
May 5 06:16:17 bruno-desktop kernel: [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
May 5 06:16:17 bruno-desktop kernel: [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
May 5 06:16:17 bruno-desktop kernel: [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
May 5 06:16:17 bruno-desktop kernel: [ 0.000000] IOAPIC[0]: apic_id 2, version 3, address 0xfec00000, GSI 0-23
May 5 06:16:17 bruno-desktop kernel: [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl edge)
May 5 06:16:17 bruno-desktop kernel: [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
May 5 06:16:17 bruno-desktop kernel: [ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs
May 5 06:16:17 bruno-desktop kernel: [ 0.000000] Using ACPI (MADT) for SMP configuration information
May 5 06:16:17 bruno-desktop kernel: [ 0.000000] SMP: Allowing 1 CPUs, 0 hotplug CPUs
May 5 06:16:17 bruno-desktop kernel: [ 0.000000] PM: Registered nosave memory: 0000000000002000 - 0000000000006000
May 5 06:16:17 bruno-desktop kernel: [ 0.000000] PM: Registered nosave memory: 0000000000007000 - 0000000000010000
May 5 06:16:17 bruno-desktop kernel: [ 0.000000] PM: Registered nosave memory: 0000000000092000 - 00000000000a0000
May 5 06:16:17 bruno-desktop kernel: [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
May 5 06:16:17 bruno-desktop kernel: [ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
May 5 06:16:17 bruno-desktop kernel: [ 0.000000] Allocating PCI resources starting at 30000000 (gap: 20000000:dec00000)
May 5 06:16:17 bruno-desktop kernel: [ 0.000000] PERCPU: Allocating 45056 bytes of per cpu data
May 5 06:16:17 bruno-desktop kernel: [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 129921
May 5 06:16:17 bruno-desktop kernel: [ 0.000000] Kernel command line: root=UUID=0d2bae3e-0fb2-4d18-9dec-2fa5baaf72d8 ro quiet splash
May 5 06:16:17 bruno-desktop kernel: [ 0.000000] Enabling fast FPU save and restore... done.
May 5 06:16:17 bruno-desktop kernel: [ 0.000000] Enabling unmasked SIMD FPU exception support... done.
May 5 06:16:17 bruno-desktop kernel: [ 0.000000] Initializing CPU#0
May 5 06:16:17 bruno-desktop kernel: [ 0.000000] PID hash table entries: 2048 (order: 11, 8192 bytes)
May 5 06:16:17 bruno-desktop kernel: [ 0.000000] Fast TSC calibration using PIT
May 5 06:16:17 bruno-desktop kernel: [ 0.000000] Detected 1044.833 MHz processor.
May 5 06:16:17 bruno-desktop kernel: [ 0.004000] Console: colour VGA+ 80x25
May 5 06:16:17 bruno-desktop kernel: [ 0.004000] console [tty0] enabled
May 5 06:16:17 bruno-desktop kernel: [ 0.004000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
May 5 06:16:17 bruno-desktop kernel: [ 0.004000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
May 5 06:16:17 bruno-desktop kernel: [ 0.004000] allocated 2621360 bytes of page_cgroup
May 5 06:16:17 bruno-desktop kernel: [ 0.004000] please try cgroup_disable=memory option if you don't want
May 5 06:16:17 bruno-desktop kernel: [ 0.004000] Scanning for low memory corruption every 60 seconds
May 5 06:16:17 bruno-desktop kernel: [ 0.004000] Memory: 501352k/524272k available (4126k kernel code, 22188k reserved, 2208k data, 532k init, 0k highmem)
May 5 06:16:17 bruno-desktop kernel: [ 0.004000] virtual kernel memory layout:
May 5 06:16:17 bruno-desktop kernel: [ 0.004000] fixmap : 0xffc77000 - 0xfffff000 (3616 kB)
May 5 06:16:17 bruno-desktop kernel: [ 0.004000] pkmap : 0xff400000 - 0xff800000 (4096 kB)
May 5 06:16:17 bruno-desktop kernel: [ 0.004000] vmalloc : 0xe07fc000 - 0xff3fe000 ( 492 MB)
May 5 06:16:17 bruno-desktop kernel: [ 0.004000] lowmem : 0xc0000000 - 0xdfffc000 ( 511 MB)
May 5 06:16:17 bruno-desktop kernel: [ 0.004000] .init : 0xc0737000 - 0xc07bc000 ( 532 kB)
May 5 06:16:17 bruno-desktop kernel: [ 0.004000] .data : 0xc0507a6f - 0xc072fe60 (2208 kB)
May 5 06:16:17 bruno-desktop kernel: [ 0.004000] .text : 0xc0100000 - 0xc0507a6f (4126 kB)
May 5 06:16:17 bruno-desktop kernel: [ 0.004000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
May 5 06:16:17 bruno-desktop kernel: [ 0.004000] SLUB: Genslabs=12, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
May 5 06:16:17 bruno-desktop kernel: [ 0.004022] Calibrating delay loop (skipped), value calculated using timer frequency.. 2089.66 BogoMIPS (lpj=4179332)
May 5 06:16:17 bruno-desktop kernel: [ 0.004063] Security Framework initialized
May 5 06:16:17 bruno-desktop kernel: [ 0.004077] SELinux: Disabled at boot.
May 5 06:16:17 bruno-desktop kernel: [ 0.004131] AppArmor: AppArmor initialized
May 5 06:16:17 bruno-desktop kernel: [ 0.004149] Mount-cache hash table entries: 512
May 5 06:16:17 bruno-desktop kernel: [ 0.004427] Initializing cgroup subsys ns
May 5 06:16:17 bruno-desktop kernel: [ 0.004436] Initializing cgroup subsys cpuacct
May 5 06:16:17 bruno-desktop kernel: [ 0.004441] Initializing cgroup subsys memory
May 5 06:16:17 bruno-desktop kernel: [ 0.004449] Initializing cgroup subsys freezer
May 5 06:16:17 bruno-desktop kernel: [ 0.004474] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
May 5 06:16:17 bruno-desktop kernel: [ 0.004480] CPU: L2 Cache: 256K (64 bytes/line)
May 5 06:16:17 bruno-desktop kernel: [ 0.004509] Checking 'hlt' instruction... OK.
May 5 06:16:17 bruno-desktop kernel: [ 0.020776] SMP alternatives: switching to UP code
May 5 06:16:17 bruno-desktop kernel: [ 0.313115] Freeing SMP alternatives: 18k freed
May 5 06:16:17 bruno-desktop kernel: [ 0.313126] ACPI: Core revision 20080926
May 5 06:16:17 bruno-desktop kernel: [ 0.317371] ACPI: Checking initramfs for custom DSDT
May 5 06:16:17 bruno-desktop kernel: [ 0.877432] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
May 5 06:16:17 bruno-desktop kernel: [ 0.917664] CPU0: AMD Athlon(TM) XP 1600+ stepping 01
May 5 06:16:17 bruno-desktop kernel: [ 0.920002] Brought up 1 CPUs
May 5 06:16:17 bruno-desktop kernel: [ 0.920002] Total of 1 processors activated (2089.66 BogoMIPS).
May 5 06:16:17 bruno-desktop kernel: [ 0.920002] net_namespace: 776 bytes
May 5 06:16:17 bruno-desktop kernel: [ 0.920002] Booting paravirtualized kernel on bare hardware
May 5 06:16:17 bruno-desktop kernel: [ 0.920002] Time: 4:16:02 Date: 05/05/09
May 5 06:16:17 bruno-desktop kernel: [ 0.920002] regulator: core version 0.5
May 5 06:16:17 bruno-desktop kernel: [ 0.920002] NET: Registered protocol family 16
May 5 06:16:17 bruno-desktop kernel: [ 0.920002] EISA bus registered
May 5 06:16:17 bruno-desktop kernel: [ 0.920002] ACPI: bus type pci registered
May 5 06:16:17 bruno-desktop kernel: [ 0.920325] PCI: PCI BIOS revision 2.10 entry at 0xf1960, last bus=1
May 5 06:16:17 bruno-desktop kernel: [ 0.920331] PCI: Using configuration type 1 for base access
May 5 06:16:17 bruno-desktop kernel: [ 0.936072] ACPI: Interpreter enabled
May 5 06:16:17 bruno-desktop kernel: [ 0.936082] ACPI: (supports S0 S1 S4 S5)
May 5 06:16:17 bruno-desktop kernel: [ 0.936118] ACPI: Using IOAPIC for interrupt routing
May 5 06:16:17 bruno-desktop kernel: [ 0.946011] ACPI: No dock devices found.
May 5 06:16:17 bruno-desktop kernel: [ 0.946055] ACPI: PCI Root Bridge [PCI0] (0000:00)
May 5 06:16:17 bruno-desktop kernel: [ 0.946493] pci 0000:00:10.0: PME# supported from D0 D1 D2 D3hot D3cold
May 5 06:16:17 bruno-desktop kernel: [ 0.946501] pci 0000:00:10.0: PME# disabled
May 5 06:16:17 bruno-desktop kernel: [ 0.946581] pci 0000:00:10.1: PME# supported from D0 D1 D2 D3hot D3cold
May 5 06:16:17 bruno-desktop kernel: [ 0.946588] pci 0000:00:10.1: PME# disabled
May 5 06:16:17 bruno-desktop kernel: [ 0.946668] pci 0000:00:10.2: PME# supported from D0 D1 D2 D3hot D3cold
May 5 06:16:17 bruno-desktop kernel: [ 0.946674] pci 0000:00:10.2: PME# disabled
May 5 06:16:17 bruno-desktop kernel: [ 0.946759] pci 0000:00:10.3: PME# supported from D0 D1 D2 D3hot D3cold
May 5 06:16:17 bruno-desktop kernel: [ 0.946766] pci 0000:00:10.3: PME# disabled
May 5 06:16:17 bruno-desktop kernel: [ 0.946839] HPET not enabled in BIOS. You might try hpet=force boot option
May 5 06:16:17 bruno-desktop kernel: [ 0.946851] pci 0000:00:11.0: quirk: region e400-e47f claimed by vt8235 PM
May 5 06:16:17 bruno-desktop kernel: [ 0.946858] pci 0000:00:11.0: quirk: region e800-e80f claimed by vt8235 SMB
May 5 06:16:17 bruno-desktop kernel: [ 0.947038] pci 0000:00:12.0: PME# supported from D0 D1 D2 D3hot D3cold
May 5 06:16:17 bruno-desktop kernel: [ 0.947044] pci 0000:00:12.0: PME# disabled
May 5 06:16:17 bruno-desktop kernel: [ 0.949946] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12)
May 5 06:16:17 bruno-desktop kernel: [ 0.950154] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 11 12) *0, disabled.
May 5 06:16:17 bruno-desktop kernel: [ 0.950358] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 11 12) *0, disabled.
May 5 06:16:17 bruno-desktop kernel: [ 0.950561] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 11 12) *0, disabled.
May 5 06:16:17 bruno-desktop kernel: [ 0.950774] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 *10 11 12)
May 5 06:16:17 bruno-desktop kernel: [ 0.951076] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11 12) *15, disabled.
May 5 06:16:17 bruno-desktop kernel: [ 0.951288] ACPI: PCI Interrupt Link [LNKG] (IRQs *3 4 5 6 7 10 11 12 14 15)
May 5 06:16:17 bruno-desktop kernel: [ 0.951545] ACPI: WMI: Mapper loaded
May 5 06:16:17 bruno-desktop kernel: [ 0.952033] SCSI subsystem initialized
May 5 06:16:17 bruno-desktop kernel: [ 0.952256] usbcore: registered new interface driver usbfs
May 5 06:16:17 bruno-desktop kernel: [ 0.952294] usbcore: registered new interface driver hub
May 5 06:16:17 bruno-desktop kernel: [ 0.952359] usbcore: registered new device driver usb
May 5 06:16:17 bruno-desktop kernel: [ 0.952613] PCI: Using ACPI for IRQ routing
May 5 06:16:17 bruno-desktop kernel: [ 0.952774] Bluetooth: Core ver 2.13
May 5 06:16:17 bruno-desktop kernel: [ 0.952774] NET: Registered protocol family 31
May 5 06:16:17 bruno-desktop kernel: [ 0.952774] Bluetooth: HCI device and connection manager initialized
May 5 06:16:17 bruno-desktop kernel: [ 0.952774] Bluetooth: HCI socket layer initialized
May 5 06:16:17 bruno-desktop kernel: [ 0.952774] NET: Registered protocol family 8
May 5 06:16:17 bruno-desktop kernel: [ 0.952774] NET: Registered protocol family 20
May 5 06:16:17 bruno-desktop kernel: [ 0.952774] NetLabel: Initializing
May 5 06:16:17 bruno-desktop kernel: [ 0.952774] NetLabel: domain hash size = 128
May 5 06:16:17 bruno-desktop kernel: [ 0.952774] NetLabel: protocols = UNLABELED CIPSOv4
May 5 06:16:17 bruno-desktop kernel: [ 0.952774] NetLabel: unlabeled traffic allowed by default
May 5 06:16:17 bruno-desktop kernel: [ 0.952774] AppArmor: AppArmor Filesystem Enabled
May 5 06:16:17 bruno-desktop kernel: [ 0.952774] pnp: PnP ACPI init
May 5 06:16:17 bruno-desktop kernel: [ 0.952774] ACPI: bus type pnp registered
May 5 06:16:17 bruno-desktop kernel: [ 0.961144] pnp: PnP ACPI: found 15 devices
May 5 06:16:17 bruno-desktop kernel: [ 0.961148] ACPI: ACPI bus type pnp unregistered
May 5 06:16:17 bruno-desktop kernel: [ 0.961156] PnPBIOS: Disabled by ACPI PNP
May 5 06:16:17 bruno-desktop kernel: [ 0.961178] system 00:00: iomem range 0x0-0x9ffff could not be reserved
May 5 06:16:17 bruno-desktop kernel: [ 0.961185] system 00:00: iomem range 0xf0000-0xfffff could not be reserved
May 5 06:16:17 bruno-desktop kernel: [ 0.961191] system 00:00: iomem range 0x100000-0x1fffffff could not be reserved
May 5 06:16:17 bruno-desktop kernel: [ 0.961197] system 00:00: iomem range 0xfec00000-0xfec000ff has been reserved
May 5 06:16:17 bruno-desktop kernel: [ 0.961203] system 00:00: iomem range 0xfee00000-0xfee00fff has been reserved
May 5 06:16:17 bruno-desktop kernel: [ 0.961216] system 00:02: ioport range 0xe400-0xe47f has been reserved
May 5 06:16:17 bruno-desktop kernel: [ 0.961222] system 00:02: ioport range 0xe800-0xe81f could not be reserved
May 5 06:16:17 bruno-desktop kernel: [ 0.961228] system 00:02: iomem range 0xfff80000-0xffffffff could not be reserved
May 5 06:16:17 bruno-desktop kernel: [ 0.961233] system 00:02: iomem range 0xffb80000-0xffbfffff has been reserved
May 5 06:16:17 bruno-desktop kernel: [ 0.961245] system 00:03: ioport range 0x4d0-0x4d1 has been reserved
May 5 06:16:17 bruno-desktop kernel: [ 0.961262] system 00:0e: ioport range 0x290-0x297 has been reserved
May 5 06:16:17 bruno-desktop kernel: [ 0.961268] system 00:0e: ioport range 0x370-0x375 has been reserved
May 5 06:16:17 bruno-desktop kernel: [ 0.996177] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
May 5 06:16:17 bruno-desktop kernel: [ 0.996184] pci 0000:00:01.0: IO window: 0xd000-0xdfff
May 5 06:16:17 bruno-desktop kernel: [ 0.996193] pci 0000:00:01.0: MEM window: 0xdf000000-0xdfffffff
May 5 06:16:17 bruno-desktop kernel: [ 0.996200] pci 0000:00:01.0: PREFETCH window: 0x000000e0000000-0x000000f7ffffff
May 5 06:16:17 bruno-desktop kernel: [ 0.996233] bus: 00 index 0 io port: [0x00-0xffff]
May 5 06:16:17 bruno-desktop kernel: [ 0.996237] bus: 00 index 1 mmio: [0x000000-0xffffffff]
May 5 06:16:17 bruno-desktop kernel: [ 0.996242] bus: 01 index 0 io port: [0xd000-0xdfff]
May 5 06:16:17 bruno-desktop kernel: [ 0.996246] bus: 01 index 1 mmio: [0xdf000000-0xdfffffff]
May 5 06:16:17 bruno-desktop kernel: [ 0.996251] bus: 01 index 2 mmio: [0xe0000000-0xf7ffffff]
May 5 06:16:17 bruno-desktop kernel: [ 0.996255] bus: 01 index 3 mmio: [0x0-0x0]
May 5 06:16:17 bruno-desktop kernel: [ 0.996279] NET: Registered protocol family 2
May 5 06:16:17 bruno-desktop kernel: [ 0.996535] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
May 5 06:16:17 bruno-desktop kernel: [ 0.997046] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
May 5 06:16:17 bruno-desktop kernel: [ 0.997373] TCP bind hash table entries: 16384 (order: 5, 131072 bytes)
May 5 06:16:17 bruno-desktop kernel: [ 0.997699] TCP: Hash tables configured (established 16384 bind 16384)
May 5 06:16:17 bruno-desktop kernel: [ 0.997705] TCP reno registered
May 5 06:16:17 bruno-desktop kernel: [ 0.997915] NET: Registered protocol family 1
May 5 06:16:17 bruno-desktop kernel: [ 0.998199] checking if image is initramfs...<7>Switched to high resolution mode on CPU 0
May 5 06:16:17 bruno-desktop kernel: [ 1.549024] it is
May 5 06:16:17 bruno-desktop kernel: [ 2.211866] Freeing initrd memory: 7355k freed
May 5 06:16:17 bruno-desktop kernel: [ 2.211949] Simple Boot Flag at 0x3a set to 0x1
May 5 06:16:17 bruno-desktop kernel: [ 2.212108] cpufreq: No nForce2 chipset.
May 5 06:16:17 bruno-desktop kernel: [ 2.212441] audit: initializing netlink socket (disabled)
May 5 06:16:17 bruno-desktop kernel: [ 2.212479] type=2000 audit(1241496963.212:1): initialized
May 5 06:16:17 bruno-desktop kernel: [ 2.227381] HugeTLB registered 4 MB page size, pre-allocated 0 pages
May 5 06:16:17 bruno-desktop kernel: [ 2.230040] VFS: Disk quotas dquot_6.5.1
May 5 06:16:17 bruno-desktop kernel: [ 2.230157] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
May 5 06:16:17 bruno-desktop kernel: [ 2.231402] fuse init (API version 7.10)
May 5 06:16:17 bruno-desktop kernel: [ 2.231567] msgmni has been set to 994
May 5 06:16:17 bruno-desktop kernel: [ 2.231985] alg: No test for stdrng (krng)
May 5 06:16:17 bruno-desktop kernel: [ 2.232044] io scheduler noop registered
May 5 06:16:17 bruno-desktop kernel: [ 2.232049] io scheduler anticipatory registered
May 5 06:16:17 bruno-desktop kernel: [ 2.232054] io scheduler deadline registered
May 5 06:16:17 bruno-desktop kernel: [ 2.232088] io scheduler cfq registered (default)
May 5 06:16:17 bruno-desktop kernel: [ 2.232118] PCI: VIA PCI bridge detected.Disabling DAC.
May 5 06:16:17 bruno-desktop kernel: [ 2.241136] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
May 5 06:16:17 bruno-desktop kernel: [ 2.241168] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
May 5 06:16:17 bruno-desktop kernel: [ 2.241428] input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
May 5 06:16:17 bruno-desktop kernel: [ 2.241434] ACPI: Power Button (FF) [PWRF]
May 5 06:16:17 bruno-desktop kernel: [ 2.241528] input: Power Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
May 5 06:16:17 bruno-desktop kernel: [ 2.241533] ACPI: Power Button (CM) [PWRB]
May 5 06:16:17 bruno-desktop kernel: [ 2.241834] processor ACPI_CPU:00: registered as cooling_device0
May 5 06:16:17 bruno-desktop kernel: [ 2.246783] isapnp: Scanning for PnP cards...
May 5 06:16:17 bruno-desktop kernel: [ 2.600349] isapnp: No Plug & Play device found
May 5 06:16:17 bruno-desktop kernel: [ 2.602767] Serial: 8250/16550 driver4 ports, IRQ sharing enabled
May 5 06:16:17 bruno-desktop kernel: [ 2.602880] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
May 5 06:16:17 bruno-desktop kernel: [ 2.603391] 00:0a: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
May 5 06:16:17 bruno-desktop kernel: [ 2.604987] brd: module loaded
May 5 06:16:17 bruno-desktop kernel: [ 2.605627] loop: module loaded
May 5 06:16:17 bruno-desktop kernel: [ 2.605805] Fixed MDIO Bus: probed
May 5 06:16:17 bruno-desktop kernel: [ 2.605818] PPP generic driver version 2.4.2
May 5 06:16:17 bruno-desktop kernel: [ 2.605958] input: Macintosh mouse button emulation as /devices/virtual/input/input2
May 5 06:16:17 bruno-desktop kernel: [ 2.606030] Driver 'sd' needs updating - please use bus_type methods
May 5 06:16:17 bruno-desktop kernel: [ 2.606049] Driver 'sr' needs updating - please use bus_type methods
May 5 06:16:17 bruno-desktop kernel: [ 2.607057] pata_via 0000:00:11.1: can't derive routing for PCI INT A
May 5 06:16:17 bruno-desktop kernel: [ 2.607491] scsi0 : pata_via
May 5 06:16:17 bruno-desktop kernel: [ 2.607711] scsi1 : pata_via
May 5 06:16:17 bruno-desktop kernel: [ 2.608969] ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xa000 irq 14
May 5 06:16:17 bruno-desktop kernel: [ 2.608976] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xa008 irq 15
May 5 06:16:17 bruno-desktop kernel: [ 2.780680] ata1.00: ATA-6: HDS722512VLAT80, V33OA6EA, max UDMA/100
May 5 06:16:17 bruno-desktop kernel: [ 2.780687] ata1.00: 241254720 sectors, multi 16: LBA48
May 5 06:16:17 bruno-desktop kernel: [ 2.804546] ata1.00: configured for UDMA/100
May 5 06:16:17 bruno-desktop kernel: [ 2.992371] ata2.00: ATAPI: HL-DT-ST GCE-8526B, 1.03, max UDMA/33
May 5 06:16:17 bruno-desktop kernel: [ 2.992428] ata2.01: ATAPI: HL-DT-STDVD-ROM GDR8163B, 0L15, max UDMA/33
May 5 06:16:17 bruno-desktop kernel: [ 3.008269] ata2.00: configured for UDMA/33
May 5 06:16:17 bruno-desktop kernel: [ 3.024270] ata2.01: configured for UDMA/33
May 5 06:16:17 bruno-desktop kernel: [ 3.025405] scsi 0:0:0:0: Direct-Access ATA HDS722512VLAT80 V33O PQ: 0 ANSI: 5
May 5 06:16:17 bruno-desktop kernel: [ 3.025623] sd 0:0:0:0: [sda] 241254720 512-byte hardware sectors: (123 GB/115 GiB)
May 5 06:16:17 bruno-desktop kernel: [ 3.025663] sd 0:0:0:0: [sda] Write Protect is off
May 5 06:16:17 bruno-desktop kernel: [ 3.025731] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
May 5 06:16:17 bruno-desktop kernel: [ 3.025886] sd 0:0:0:0: [sda] 241254720 512-byte hardware sectors: (123 GB/115 GiB)
May 5 06:16:17 bruno-desktop kernel: [ 3.025921] sd 0:0:0:0: [sda] Write Protect is off
May 5 06:16:17 bruno-desktop kernel: [ 3.025984] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
May 5 06:16:17 bruno-desktop kernel: [ 3.025994] sda: sda1 sda2 < sda5 >
May 5 06:16:17 bruno-desktop kernel: [ 3.061884] sd 0:0:0:0: [sda] Attached SCSI disk
May 5 06:16:17 bruno-desktop kernel: [ 3.062012] sd 0:0:0:0: Attached scsi generic sg0 type 0
May 5 06:16:17 bruno-desktop kernel: [ 3.062422] scsi 1:0:0:0: CD-ROM HL-DT-ST CD-RW GCE-8526B 1.03 PQ: 0 ANSI: 5
May 5 06:16:17 bruno-desktop kernel: [ 3.063848] sr0: scsi3-mmc drive: 40x/52x writer cd/rw xa/form2 cdda tray
May 5 06:16:17 bruno-desktop kernel: [ 3.063855] Uniform CD-ROM driver Revision: 3.20
May 5 06:16:17 bruno-desktop kernel: [ 3.064158] sr 1:0:0:0: Attached scsi generic sg1 type 5
May 5 06:16:17 bruno-desktop kernel: [ 3.067609] scsi 1:0:1:0: CD-ROM HL-DT-ST DVD-ROM GDR8163B 0L15 PQ: 0 ANSI: 5
May 5 06:16:17 bruno-desktop kernel: [ 3.075306] sr1: scsi3-mmc drive: 52x/52x cd/rw xa/form2 cdda tray
May 5 06:16:17 bruno-desktop kernel: [ 3.075525] sr 1:0:1:0: Attached scsi generic sg2 type 5
May 5 06:16:17 bruno-desktop kernel: [ 3.075852] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
May 5 06:16:17 bruno-desktop kernel: [ 3.075908] ehci_hcd 0000:00:10.3: PCI INT D -> GSI 21 (level, low) -> IRQ 21
May 5 06:16:17 bruno-desktop kernel: [ 3.075965] ehci_hcd 0000:00:10.3: EHCI Host Controller
May 5 06:16:17 bruno-desktop kernel: [ 3.076113] ehci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 1
May 5 06:16:17 bruno-desktop kernel: [ 3.076224] ehci_hcd 0000:00:10.3: irq 21, io mem 0xde800000
May 5 06:16:17 bruno-desktop kernel: [ 3.088020] ehci_hcd 0000:00:10.3: USB 2.0 started, EHCI 1.00
May 5 06:16:17 bruno-desktop kernel: [ 3.088154] usb usb1: configuration #1 chosen from 1 choice
May 5 06:16:17 bruno-desktop kernel: [ 3.088223] hub 1-0:1.0: USB hub found
May 5 06:16:17 bruno-desktop kernel: [ 3.088248] hub 1-0:1.0: 6 ports detected
May 5 06:16:17 bruno-desktop kernel: [ 3.088442] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
May 5 06:16:17 bruno-desktop kernel: [ 3.088472] uhci_hcd: USB Universal Host Controller Interface driver
May 5 06:16:17 bruno-desktop kernel: [ 3.088567] uhci_hcd 0000:00:10.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
May 5 06:16:17 bruno-desktop kernel: [ 3.088580] uhci_hcd 0000:00:10.0: UHCI Host Controller
May 5 06:16:17 bruno-desktop kernel: [ 3.088677] uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 2
May 5 06:16:17 bruno-desktop kernel: [ 3.088706] uhci_hcd 0000:00:10.0: irq 21, io base 0x0000b000
May 5 06:16:17 bruno-desktop kernel: [ 3.088856] usb usb2: configuration #1 chosen from 1 choice
May 5 06:16:17 bruno-desktop kernel: [ 3.088904] hub 2-0:1.0: USB hub found
May 5 06:16:17 bruno-desktop kernel: [ 3.088927] hub 2-0:1.0: 2 ports detected
May 5 06:16:17 bruno-desktop kernel: [ 3.089099] uhci_hcd 0000:00:10.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
May 5 06:16:17 bruno-desktop kernel: [ 3.089109] uhci_hcd 0000:00:10.1: UHCI Host Controller
May 5 06:16:17 bruno-desktop kernel: [ 3.089191] uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 3
May 5 06:16:17 bruno-desktop kernel: [ 3.089217] uhci_hcd 0000:00:10.1: irq 21, io base 0x0000a800
May 5 06:16:17 bruno-desktop kernel: [ 3.089363] usb usb3: configuration #1 chosen from 1 choice
May 5 06:16:17 bruno-desktop kernel: [ 3.089409] hub 3-0:1.0: USB hub found
May 5 06:16:17 bruno-desktop kernel: [ 3.089429] hub 3-0:1.0: 2 ports detected
May 5 06:16:17 bruno-desktop kernel: [ 3.089584] uhci_hcd 0000:00:10.2: PCI INT C -> GSI 21 (level, low) -> IRQ 21
May 5 06:16:17 bruno-desktop kernel: [ 3.089594] uhci_hcd 0000:00:10.2: UHCI Host Controller
May 5 06:16:17 bruno-desktop kernel: [ 3.089686] uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 4
May 5 06:16:17 bruno-desktop kernel: [ 3.089713] uhci_hcd 0000:00:10.2: irq 21, io base 0x0000a400
May 5 06:16:17 bruno-desktop kernel: [ 3.089867] usb usb4: configuration #1 chosen from 1 choice
May 5 06:16:17 bruno-desktop kernel: [ 3.089914] hub 4-0:1.0: USB hub found
May 5 06:16:17 bruno-desktop kernel: [ 3.089956] hub 4-0:1.0: 2 ports detected
May 5 06:16:17 bruno-desktop kernel: [ 3.090182] usbcore: registered new interface driver libusual
May 5 06:16:17 bruno-desktop kernel: [ 3.090252] usbcore: registered new interface driver usbserial
May 5 06:16:17 bruno-desktop kernel: [ 3.090275] USB Serial support registered for generic
May 5 06:16:17 bruno-desktop kernel: [ 3.090301] usbcore: registered new interface driver usbserial_generic
May 5 06:16:17 bruno-desktop kernel: [ 3.090306] usbserial: USB Serial Driver core
May 5 06:16:17 bruno-desktop kernel: [ 3.090401] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
May 5 06:16:17 bruno-desktop kernel: [ 3.092663] serio: i8042 KBD port at 0x60,0x64 irq 1
May 5 06:16:18 bruno-desktop kernel: [ 3.092677] serio: i8042 AUX port at 0x60,0x64 irq 12
May 5 06:16:18 bruno-desktop kernel: [ 3.092913] mice: PS/2 mouse device common for all mice
May 5 06:16:18 bruno-desktop kernel: [ 3.093150] rtc_cmos 00:05: RTC can wake from S4
May 5 06:16:18 bruno-desktop kernel: [ 3.093225] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
May 5 06:16:18 bruno-desktop kernel: [ 3.093278] rtc0: alarms up to one month, 242 bytes nvram
May 5 06:16:18 bruno-desktop kernel: [ 3.093458] device-mapper: uevent: version 1.0.3
May 5 06:16:18 bruno-desktop kernel: [ 3.093697] device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-devel@redhat.com
May 5 06:16:18 bruno-desktop kernel: [ 3.093818] device-mapper: multipath: version 1.0.5 loaded
May 5 06:16:18 bruno-desktop kernel: [ 3.093824] device-mapper: multipath round-robin: version 1.0.0 loaded
May 5 06:16:18 bruno-desktop kernel: [ 3.094020] EISA: Probing bus 0 at eisa.0
May 5 06:16:18 bruno-desktop kernel: [ 3.094069] EISA: Detected 0 cards.
May 5 06:16:18 bruno-desktop kernel: [ 3.094134] cpuidle: using governor ladder
May 5 06:16:18 bruno-desktop kernel: [ 3.094139] cpuidle: using governor menu
May 5 06:16:18 bruno-desktop kernel: [ 3.095192] TCP cubic registered
May 5 06:16:18 bruno-desktop kernel: [ 3.095380] NET: Registered protocol family 10
May 5 06:16:18 bruno-desktop kernel: [ 3.096251] lo: Disabled Privacy Extensions
May 5 06:16:18 bruno-desktop kernel: [ 3.096907] NET: Registered protocol family 17
May 5 06:16:18 bruno-desktop kernel: [ 3.096948] Bluetooth: L2CAP ver 2.11
May 5 06:16:18 bruno-desktop kernel: [ 3.096952] Bluetooth: L2CAP socket layer initialized
May 5 06:16:18 bruno-desktop kernel: [ 3.096958] Bluetooth: SCO (Voice Link) ver 0.6
May 5 06:16:18 bruno-desktop kernel: [ 3.096961] Bluetooth: SCO socket layer initialized
May 5 06:16:18 bruno-desktop kernel: [ 3.097039] Bluetooth: RFCOMM socket layer initialized
May 5 06:16:18 bruno-desktop kernel: [ 3.097057] Bluetooth: RFCOMM TTY layer initialized
May 5 06:16:18 bruno-desktop kernel: [ 3.097061] Bluetooth: RFCOMM ver 1.10
May 5 06:16:18 bruno-desktop kernel: [ 3.097106] powernow-k8: Processor cpuid 681 not supported
May 5 06:16:18 bruno-desktop kernel: [ 3.097160] Using IPI No-Shortcut mode
May 5 06:16:18 bruno-desktop kernel: [ 3.097379] registered taskstats version 1
May 5 06:16:18 bruno-desktop kernel: [ 3.097571] Magic number: 9:508:261
May 5 06:16:18 bruno-desktop kernel: [ 3.097752] rtc_cmos 00:05: setting system clock to 2009-05-05 04:16:04 UTC (1241496964)
May 5 06:16:18 bruno-desktop kernel: [ 3.097759] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
May 5 06:16:18 bruno-desktop kernel: [ 3.097762] EDD information not available.
May 5 06:16:18 bruno-desktop kernel: [ 3.099005] Freeing unused kernel memory: 532k freed
May 5 06:16:18 bruno-desktop kernel: [ 3.099254] Write protecting the kernel text: 4128k
May 5 06:16:18 bruno-desktop kernel: [ 3.099334] Write protecting the kernel read-only data: 1532k
May 5 06:16:18 bruno-desktop kernel: [ 3.132217] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
May 5 06:16:18 bruno-desktop kernel: [ 3.840233] Floppy drive(s): fd0 is 1.44M
May 5 06:16:18 bruno-desktop kernel: [ 3.860364] FDC 0 is a post-1991 82077
May 5 06:16:18 bruno-desktop kernel: [ 4.132663] via-rhine.c:v1.10-LK1.4.3 2007-03-06 Written by Donald Becker
May 5 06:16:18 bruno-desktop kernel: [ 4.132771] via-rhine 0000:00:12.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
May 5 06:16:18 bruno-desktop kernel: [ 4.134038] eth0: VIA Rhine II at 0xde000000, 00:11:2f:3f:c1:68, IRQ 23.
May 5 06:16:18 bruno-desktop kernel: [ 4.134756] eth0: MII PHY found at address 1, status 0x786d advertising 01e1 Link 45e1.
May 5 06:16:18 bruno-desktop kernel: [ 4.905071] PM: Starting manual resume from disk
May 5 06:16:18 bruno-desktop kernel: [ 4.944567] kjournald starting. Commit interval 5 seconds
May 5 06:16:18 bruno-desktop kernel: [ 4.944597] EXT3-fs: mounted filesystem with ordered data mode.
May 5 06:16:18 bruno-desktop kernel: [ 9.631243] udev: starting version 141
May 5 06:16:18 bruno-desktop kernel: [ 9.846995] parport_pc 00:09: reported by Plug and Play ACPI
May 5 06:16:18 bruno-desktop kernel: [ 9.847076] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,ECP,DMA]
May 5 06:16:18 bruno-desktop kernel: [ 9.957160] Linux agpgart interface v0.103
May 5 06:16:18 bruno-desktop kernel: [ 10.003405] agpgart: Detected VIA KT400/KT400A/KT600 chipset
May 5 06:16:18 bruno-desktop kernel: [ 10.013432] agpgart-via 0000:00:00.0: AGP aperture is 64M @ 0xf8000000
May 5 06:16:18 bruno-desktop kernel: [ 10.054078] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
May 5 06:16:18 bruno-desktop kernel: [ 10.145493] NET: Registered protocol family 23
May 5 06:16:18 bruno-desktop kernel: [ 10.173324] gameport: EMU10K1 is pci0000:00:0a.1/gameport0, io 0xb400, speed 1217kHz
May 5 06:16:18 bruno-desktop kernel: [ 10.587167] input: PC Speaker as /devices/platform/pcspkr/input/input4
May 5 06:16:18 bruno-desktop kernel: [ 10.707062] synaptics was reset on resume, see synaptics_resume_reset if you have trouble on resume
May 5 06:16:18 bruno-desktop kernel: [ 10.979299] EMU10K1_Audigy 0000:00:0a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
May 5 06:16:18 bruno-desktop kernel: [ 11.019416] Control name 'Sigmatel Surround Phase Inversion Playback Switch' truncated to 'Sigmatel Surround Phase Inversion Playback '
May 5 06:16:18 bruno-desktop kernel: [ 11.869058] input: ImExPS/2 Logitech Wheel Mouse as /devices/platform/i8042/serio1/input/input5
May 5 06:16:18 bruno-desktop kernel: [ 11.909090] lp0: using parport0 (interrupt-driven).
May 5 06:16:18 bruno-desktop kernel: [ 12.113568] Adding 1485972k swap on /dev/sda5. Priority:-1 extents:1 across:1485972k
May 5 06:16:18 bruno-desktop kernel: [ 12.718054] EXT3 FS on sda1, internal journal
May 5 06:16:18 bruno-desktop kernel: [ 14.264625] type=1505 audit(1241496975.666:2): operation="profile_load" name="/usr/share/gdm/guest-session/Xsession" name2="default" pid=1886
May 5 06:16:18 bruno-desktop kernel: [ 14.392864] type=1505 audit(1241496975.794:3): operation="profile_load" name="/sbin/dhclient-script" name2="default" pid=1890
May 5 06:16:18 bruno-desktop kernel: [ 14.393375] type=1505 audit(1241496975.794:4): operation="profile_load" name="/sbin/dhclient3" name2="default" pid=1890
May 5 06:16:18 bruno-desktop kernel: [ 14.393555] type=1505 audit(1241496975.794:5): operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" name2="default" pid=1890
May 5 06:16:18 bruno-desktop kernel: [ 14.393707] type=1505 audit(1241496975.794:6): operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" name2="default" pid=1890
May 5 06:16:18 bruno-desktop kernel: [ 14.752100] type=1505 audit(1241496976.154:7): operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" name2="default" pid=1895
May 5 06:16:18 bruno-desktop kernel: [ 14.752759] type=1505 audit(1241496976.154:8): operation="profile_load" name="/usr/sbin/cupsd" name2="default" pid=1895
May 5 06:16:18 bruno-desktop kernel: [ 14.827626] type=1505 audit(1241496976.226:9): operation="profile_load" name="/usr/sbin/tcpdump" name2="default" pid=1899
May 5 06:16:19 bruno-desktop kernel: [ 18.263892] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
May 5 06:16:19 bruno-desktop kernel: [ 18.263900] Bluetooth: BNEP filters: protocol multicast
May 5 06:16:19 bruno-desktop kernel: [ 18.299647] Bridge firewalling registered
May 5 06:16:20 bruno-desktop kernel: [ 19.489654] pci 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
May 5 06:16:21 bruno-desktop kernel: [ 19.830753] [drm] Initialized drm 1.1.0 20060810
May 5 06:16:21 bruno-desktop kernel: [ 19.919561] [drm] Initialized radeon 1.29.0 20080528 on minor 0
May 5 06:16:21 bruno-desktop kernel: [ 20.296685] agpgart-via 0000:00:00.0: AGP 3.5 bridge
May 5 06:16:21 bruno-desktop kernel: [ 20.296721] agpgart-via 0000:00:00.0: putting AGP V3 device into 8x mode
May 5 06:16:21 bruno-desktop kernel: [ 20.296789] pci 0000:01:00.0: putting AGP V3 device into 8x mode
May 5 06:16:21 bruno-desktop kernel: [ 20.524874] [drm] Setting GART location based on new memory map
May 5 06:16:21 bruno-desktop kernel: [ 20.524891] [drm] Loading R200 Microcode
May 5 06:16:21 bruno-desktop kernel: [ 20.524945] [drm] writeback test succeeded in 1 usecs
May 5 06:16:25 bruno-desktop kernel: [ 23.600721] eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
May 5 06:16:25 bruno-desktop kernel: [ 23.762762] cdrom: This disc doesn't have any tracks I recognize!
May 5 06:17:52 bruno-desktop kernel: [ 110.820175] nautilus[3568]: segfault at 9224008 ip b62db7dd sp b62c9fc0 error 4 in libbrasero-media.so.0.1.1[b62cb000+1e000]
May 5 06:18:29 bruno-desktop kernel: [ 147.678658] nautilus[3622]: segfault at 8f07000 ip b62be7dd sp b62acfc0 error 4 in libbrasero-media.so.0.1.1[b62ae000+1e000]
May 5 06:26:00 bruno-desktop kernel: [ 598.723055] nautilus[4499]: segfault at 8489000 ip b62da7dd sp b62c8fc0 error 4 in libbrasero-media.so.0.1.1[b62ca000+1e000]
May 5 06:27:39 bruno-desktop kernel: [ 697.624567] nautilus[4598]: segfault at 86a7008 ip b63467dd sp b6334fc0 error 4 in libbrasero-media.so.0.1.1[b6336000+1e000]
May 5 06:30:56 bruno-desktop kernel: [ 895.155495] nautilus[5051]: segfault at 9ba3000 ip b63047dd sp b62f2fc0 error 4 in libbrasero-media.so.0.1.1[b62f4000+1e000]
May 5 06:31:32 bruno-desktop kernel: [ 931.312707] nautilus[5090]: segfault at 82dc000 ip b62a67dd sp b6294fc0 error 4 in libbrasero-media.so.0.1.1[b6296000+1e000]
May 5 06:31:36 bruno-desktop kernel: [ 935.042162] nautilus[5094]: segfault at 9c07000 ip b63597dd sp b6347fc0 error 4 in libbrasero-media.so.0.1.1[b6349000+1e000]
May 5 06:31:54 bruno-desktop kernel: [ 953.243389] nautilus[5107]: segfault at 96e2008 ip b63847dd sp b6372fc0 error 4 in libbrasero-media.so.0.1.1[b6374000+1e000]
May 5 06:48:10 bruno-desktop kernel: [ 1928.789534] nautilus[6723]: segfault at 88d4000 ip b635f7dd sp b634dfc0 error 4 in libbrasero-media.so.0.1.1[b634f000+1e000]Ubuntu - Version 18.04 ;
X550CC (ASUS-NotebookSKU) ; Intel(R) Core(TM) i3-3217U CPU ; MT7630e 802.11bgn Wireless Netw ; RTL8111/8168/8411 PCI Express G; 1TB ST1000LM024 HN-M;
Hors ligne
#3 Le 05/05/2009, à 11:46
- lorap1
Re : [9.04] Bureau mort [résolu]
Merci de votre réponse urgente, si vous saviez comment recouvrir mon bureau : je n'ai actuellement que le fond d'écran et partie du menu (Raccourcis) ne fonctionne plus.
Que dois-je faire?
Ubuntu - Version 18.04 ;
X550CC (ASUS-NotebookSKU) ; Intel(R) Core(TM) i3-3217U CPU ; MT7630e 802.11bgn Wireless Netw ; RTL8111/8168/8411 PCI Express G; 1TB ST1000LM024 HN-M;
Hors ligne
#4 Le 05/05/2009, à 14:04
- oswald-p
Re : [9.04] Bureau mort [résolu]
Bonjour,
j'ai eu un problème similaire après avoir renseigner l'option "localisation" dans le menu de l'horloge.... ceci permettait d'afficher notamment les prévisions météo... mais après un redémarrage patatra .... ça pédale et le bureau ne s'affiche pas...
Pour résoudre le problème il faut:
démarrer en mode console (mode de récupération au grub).
ce rendre dans son répertoire home (cd /home/son_login).
supprimer les fichiers de configuration de gnome... je n'ai pas trouvé lequel donc j'ai tout supprimé.... ce sont des fichiers cachés (précédés d'un .) il s'agit des dossiers (.gconf, .gconfd, .gnome2_private, .local, .nautilus)
pour chaque dossier il faut utiliser la commande "rm" pour le supprimer
soit par exemple:
rm -rf .gconfbon courage
O-p
Chuck Norris a terrassé Prince de Lu avec un cookie
Hors ligne
#5 Le 05/05/2009, à 17:17
- lorap1
Re : [9.04] Bureau mort [résolu]
Merci oswald-p,
Démarrer en mode console, tu fais comment?
Merci.
Ubuntu - Version 18.04 ;
X550CC (ASUS-NotebookSKU) ; Intel(R) Core(TM) i3-3217U CPU ; MT7630e 802.11bgn Wireless Netw ; RTL8111/8168/8411 PCI Express G; 1TB ST1000LM024 HN-M;
Hors ligne
#6 Le 05/05/2009, à 18:33
- oswald-p
Re : [9.04] Bureau mort [résolu]
au démarrage, tu as le grub qui donne le choix d'utiliser ubuntu ou windows par exemple...
Il y a aussi une option "démarrage d'urgence".... puis dans le menu qui apparaîtra il y aura l'option pour avoir une console "root".
attention car dans ce mode a ne pas se planter car en tant que "root" tu pourrais causer beaucoup de dégats.
les commandes de base pour utiliser une console sont:
"ls" qui permet de lister les fichiers du dossier courant (ou ls -a pour aussi voire les fichiers cachés)
"cd" qui permet d'aller dans un dossier particulié (par exemple si tu t'appelles toto et que tu veux aller dans ton dossier personnel ça sera cd /home/toto).
"rm" pour supprimer des fichiers (et rm -rf pour supprimer un dossier et tous ces dossiers)
bon courage jeune padawn
O-p
Chuck Norris a terrassé Prince de Lu avec un cookie
Hors ligne
#7 Le 05/05/2009, à 19:55
- lorap1
Re : [9.04] Bureau mort [résolu]
Bien, bien:
ce rendre dans son répertoire home (cd /home/son_login).
Jusque là j'ai tatonné pour rentrer en mode console, il faut taper la lettre "c", je crois et hop! ça se fout en grub>
Mais à partir de là il n'y a pas moyen de rentrer dans mon home comme tu l'indiques : i refuse l'grub, i veu pas, trouve pas la commande.
En plus que je n'arrive pas à imprimer la page 2 et 3 de ce post sur mon imprimante (reconnue siou plaît), car il ne prend que les en-tête et les arrières-plan, pas le texte! (la page 1 ça va, va t'en savoir)
Ubuntu - Version 18.04 ;
X550CC (ASUS-NotebookSKU) ; Intel(R) Core(TM) i3-3217U CPU ; MT7630e 802.11bgn Wireless Netw ; RTL8111/8168/8411 PCI Express G; 1TB ST1000LM024 HN-M;
Hors ligne
#8 Le 05/05/2009, à 20:56
- lorap1
Re : [9.04] Bureau mort [résolu]
Ca y est, j'ai compris, je suis allé sur le "kernel..." en mode "(safe)", puis j'ai défilé jusqu'à grub.
J'ai pu voir le contenu de /home/mon_login. Puis, j'ai descendu tous les .[dossiers].
j'ai validé, mais pour sortir du machin, j'ai fait Ctrl+Alt+suppr (c'est bon?)
Je me suis retrouvé au démarrage.
Conclusion :
- le problème reste le même (pas de bureau activable, et pas de déroulement de raccourcis
- d'autre part, les configurations de Mozilla (par exemple ont toutes disparues).
Je ne suis pas certain que tout a été "rm -Rf" (enlevé), car si je me retrouve dans le mode safe... je retrouve tous les dossiers cachés à nouveau!
J'avoue que je n'ai jamais eu autant de problèmes depuis dimanche soir que j'ai installé 9.04. Sous la LTS 8.04, ça ronflait, je crois (hormis le basculement d'une carte son).
Qu'est-ce qui se passe?
Ubuntu - Version 18.04 ;
X550CC (ASUS-NotebookSKU) ; Intel(R) Core(TM) i3-3217U CPU ; MT7630e 802.11bgn Wireless Netw ; RTL8111/8168/8411 PCI Express G; 1TB ST1000LM024 HN-M;
Hors ligne
#9 Le 05/05/2009, à 22:01
- lorap1
Re : [9.04] Bureau mort [résolu]
Maintenant , je n'ai descendu que les dossiers que tu m'as cités (j'avais mal lus). Mais pour sortir du mode console j'ai fait à nouveau CtrlAltSuppr. Je ne suis pas sûr que ce soit bon, non?
Ubuntu - Version 18.04 ;
X550CC (ASUS-NotebookSKU) ; Intel(R) Core(TM) i3-3217U CPU ; MT7630e 802.11bgn Wireless Netw ; RTL8111/8168/8411 PCI Express G; 1TB ST1000LM024 HN-M;
Hors ligne
#10 Le 06/05/2009, à 08:48
- lorap1
Re : [9.04] Bureau mort [résolu]
J'ai résolu mon problème: il s'agit d'une question d'activation de dépôts de paquets ; j'ai décoché aujourd'hui les deux premiers qui étaient activés précédemment :
[img]
[/img]
Depuis, j'ai dû mettre à jour, et un certain gnome-apt-install a demandé à se télécharger.
tout est redevenu à la normale. Ouf!
Ubuntu - Version 18.04 ;
X550CC (ASUS-NotebookSKU) ; Intel(R) Core(TM) i3-3217U CPU ; MT7630e 802.11bgn Wireless Netw ; RTL8111/8168/8411 PCI Express G; 1TB ST1000LM024 HN-M;
Hors ligne
Pages : 1