Lecture des journaux sur Jaunty

Dr.BUg · Le 11/06/2009, à 08:44

Bonjour à tous,

voilà une question comme ça au réveil je me demandais si je pouvais décortiquer mes logs avec vos yeux de lynx ici, pour débusquer les erreurs système. comme je les suspects de détenir de nombreuses informations, j'aimerais bien les traduires et les comprendres avec vous ! comment faire ?

Ehorinn · Le 11/06/2009, à 09:47

Tu peux commencer à lire le résultat de la commande dmesg

Si tu veux voir beaucoup de chose enlève l'option quiet dans les paramètres d'amorcage du noyau. Ils se trouvent dans le fichier /boot/grub/menu.lst

Dr.BUg · Le 11/06/2009, à 10:32

Salut Ehorinn, je post mon dmesg

[ 0.000000] BIOS EBDA/lowmem at: 0009b400/0009b400
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.28-11-generic (buildd@palmer) (gcc version 4.3.3 (Ubuntu 4.3.3-5ubuntu4) ) #42-Ubuntu SMP Fri Apr 17 01:57:59 UTC 2009 (Ubuntu 2.6.28-11.42-generic)
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] NSC Geode by NSC
[ 0.000000] Cyrix CyrixInstead
[ 0.000000] Centaur CentaurHauls
[ 0.000000] Transmeta GenuineTMx86
[ 0.000000] Transmeta TransmetaCPU
[ 0.000000] UMC UMC UMC UMC
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009b400 (usable)
[ 0.000000] BIOS-e820: 000000000009b400 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e2000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 0000000077fb0000 (usable)
[ 0.000000] BIOS-e820: 0000000077fb0000 - 0000000077fbe000 (ACPI data)
[ 0.000000] BIOS-e820: 0000000077fbe000 - 0000000077fe0000 (ACPI NVS)
[ 0.000000] BIOS-e820: 0000000077fe0000 - 0000000077fee000 (reserved)
[ 0.000000] BIOS-e820: 0000000077ff0000 - 0000000078000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fef00000 (reserved)
[ 0.000000] BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
[ 0.000000] DMI present.
[ 0.000000] AMI BIOS detected: BIOS may corrupt low RAM, working it around.
[ 0.000000] last_pfn = 0x77fb0 max_arch_pfn = 0x100000
[ 0.000000] Scanning 0 areas for low memory corruption
[ 0.000000] modified physical RAM map:
[ 0.000000] modified: 0000000000000000 - 0000000000010000 (reserved)
[ 0.000000] modified: 0000000000010000 - 000000000009b400 (usable)
[ 0.000000] modified: 000000000009b400 - 00000000000a0000 (reserved)
[ 0.000000] modified: 00000000000e2000 - 0000000000100000 (reserved)
[ 0.000000] modified: 0000000000100000 - 0000000077fb0000 (usable)
[ 0.000000] modified: 0000000077fb0000 - 0000000077fbe000 (ACPI data)
[ 0.000000] modified: 0000000077fbe000 - 0000000077fe0000 (ACPI NVS)
[ 0.000000] modified: 0000000077fe0000 - 0000000077fee000 (reserved)
[ 0.000000] modified: 0000000077ff0000 - 0000000078000000 (reserved)
[ 0.000000] modified: 00000000fec00000 - 00000000fec01000 (reserved)
[ 0.000000] modified: 00000000fee00000 - 00000000fef00000 (reserved)
[ 0.000000] modified: 00000000fff00000 - 0000000100000000 (reserved)
[ 0.000000] kernel direct mapping tables up to 373fe000 @ 10000-16000
[ 0.000000] RAMDISK: 378be000 - 37fef8e2
[ 0.000000] Allocated new RAMDISK: 00881000 - 00fb28e2
[ 0.000000] Move RAMDISK from 00000000378be000 - 0000000037fef8e1 to 00881000 - 00fb28e1
[ 0.000000] ACPI: RSDP 000FB730, 0024 (r2 ACPIAM)
[ 0.000000] ACPI: XSDT 77FB0100, 0054 (r1 012209 XSDT2108 20090122 MSFT 97)
[ 0.000000] ACPI: FACP 77FB0290, 00F4 (r3 012209 FACP2108 20090122 MSFT 97)
[ 0.000000] ACPI: DSDT 77FB0450, 6A1E (r1 A1270 A1270000 0 INTL 20051117)
[ 0.000000] ACPI: FACS 77FBE000, 0040
[ 0.000000] ACPI: APIC 77FB0390, 0080 (r1 012209 APIC2108 20090122 MSFT 97)
[ 0.000000] ACPI: MCFG 77FB0410, 003C (r1 012209 OEMMCFG 20090122 MSFT 97)
[ 0.000000] ACPI: OEMB 77FBE040, 0071 (r1 012209 OEMB2108 20090122 MSFT 97)
[ 0.000000] ACPI: HPET 77FB6E70, 0038 (r1 012209 OEMHPET0 20090122 MSFT 97)
[ 0.000000] ACPI: SSDT 77FB6EB0, 02CC (r1 A M I POWERNOW 1 AMD 1)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] 1035MB HIGHMEM available.
[ 0.000000] 883MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 373fe000
[ 0.000000] low ram: 00000000 - 373fe000
[ 0.000000] bootmap 00012000 - 00018e80
[ 0.000000] (9 early reservations) ==> bootmem [0000000000 - 00373fe000]
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
[ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000]
[ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000]
[ 0.000000] #3 [0000100000 - 000087c52c] TEXT DATA BSS ==> [0000100000 - 000087c52c]
[ 0.000000] #4 [000087d000 - 0000881000] INIT_PG_TABLE ==> [000087d000 - 0000881000]
[ 0.000000] #5 [000009b400 - 0000100000] BIOS reserved ==> [000009b400 - 0000100000]
[ 0.000000] #6 [0000010000 - 0000012000] PGTABLE ==> [0000010000 - 0000012000]
[ 0.000000] #7 [0000881000 - 0000fb28e2] NEW RAMDISK ==> [0000881000 - 0000fb28e2]
[ 0.000000] #8 [0000012000 - 0000019000] BOOTMAP ==> [0000012000 - 0000019000]
[ 0.000000] found SMP MP-table at [c00ff780] 000ff780
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] Normal 0x00001000 -> 0x000373fe
[ 0.000000] HighMem 0x000373fe -> 0x00077fb0
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[2] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009b
[ 0.000000] 0: 0x00000100 -> 0x00077fb0
[ 0.000000] On node 0 totalpages: 491323
[ 0.000000] free_area_init_node: node 0, pgdat c06d0f80, node_mem_map c1000200
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3947 pages, LIFO batch:0
[ 0.000000] Normal zone: 1736 pages used for memmap
[ 0.000000] Normal zone: 220470 pages, LIFO batch:31
[ 0.000000] HighMem zone: 2072 pages used for memmap
[ 0.000000] HighMem zone: 263066 pages, LIFO batch:31
[ 0.000000] Movable zone: 0 pages used for memmap
[ 0.000000] Detected use of extended apic ids on hypertransport bus
[ 0.000000] ACPI: PM-Timer IO Port: 0x508
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled)
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] ACPI: IRQ14 used by override.
[ 0.000000] ACPI: IRQ15 used by override.
[ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.000000] ACPI: HPET id: 0x10de8201 base: 0xfed00000
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] SMP: Allowing 4 CPUs, 2 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: 000000000009b000 - 000000000009c000
[ 0.000000] PM: Registered nosave memory: 000000000009c000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e2000
[ 0.000000] PM: Registered nosave memory: 00000000000e2000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at 80000000 (gap: 78000000:86c00000)
[ 0.000000] PERCPU: Allocating 45056 bytes of per cpu data
[ 0.000000] NR_CPUS: 64, nr_cpu_ids: 4, nr_node_ids 1
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 487483
[ 0.000000] Kernel command line: root=UUID=534f57e9-ae6f-483c-969c-b4824e40a102 ro quiet splash
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes)
[ 0.000000] Extended CMOS year: 2000
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 2812.845 MHz processor.
[ 0.004000] spurious 8259A interrupt: IRQ7.
[ 0.004000] Console: colour VGA+ 80x25
[ 0.004000] console [tty0] enabled
[ 0.004000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.004000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.004000] allocated 9828480 bytes of page_cgroup
[ 0.004000] please try cgroup_disable=memory option if you don't want
[ 0.004000] Scanning for low memory corruption every 60 seconds
[ 0.004000] Memory: 1923384k/1965760k available (4126k kernel code, 41048k reserved, 2208k data, 532k init, 1060552k highmem)
[ 0.004000] virtual kernel memory layout:
[ 0.004000] fixmap : 0xffc77000 - 0xfffff000 (3616 kB)
[ 0.004000] pkmap : 0xff400000 - 0xff800000 (4096 kB)
[ 0.004000] vmalloc : 0xf7bfe000 - 0xff3fe000 ( 120 MB)
[ 0.004000] lowmem : 0xc0000000 - 0xf73fe000 ( 883 MB)
[ 0.004000] .init : 0xc0737000 - 0xc07bc000 ( 532 kB)
[ 0.004000] .data : 0xc0507a6f - 0xc072fe60 (2208 kB)
[ 0.004000] .text : 0xc0100000 - 0xc0507a6f (4126 kB)
[ 0.004000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.004000] SLUB: Genslabs=12, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.004000] hpet clockevent registered
[ 0.004000] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[ 0.004000] Calibrating delay loop (skipped), value calculated using timer frequency.. 5625.69 BogoMIPS (lpj=11251380)
[ 0.004000] Security Framework initialized
[ 0.004000] SELinux: Disabled at boot.
[ 0.004000] AppArmor: AppArmor initialized
[ 0.004000] Mount-cache hash table entries: 512
[ 0.004000] Initializing cgroup subsys ns
[ 0.004000] Initializing cgroup subsys cpuacct
[ 0.004000] Initializing cgroup subsys memory
[ 0.004000] Initializing cgroup subsys freezer
[ 0.004000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 0.004000] CPU: L2 Cache: 1024K (64 bytes/line)
[ 0.004000] CPU: Physical Processor ID: 0
[ 0.004000] CPU: Processor Core ID: 0
[ 0.004000] using C1E aware idle routine
[ 0.004000] Checking 'hlt' instruction... OK.
[ 0.017690] ACPI: Core revision 20080926
[ 0.019770] ACPI: Checking initramfs for custom DSDT
[ 0.222185] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.261879] CPU0: AMD Athlon(tm) 64 X2 Dual Core Processor 5600+ stepping 03
[ 0.264001] Booting processor 1 APIC 0x1 ip 0x6000
[ 0.004000] Initializing CPU#1
[ 0.004000] Calibrating delay using timer specific routine.. 5625.51 BogoMIPS (lpj=11251036)
[ 0.004000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 0.004000] CPU: L2 Cache: 1024K (64 bytes/line)
[ 0.004000] CPU: Physical Processor ID: 0
[ 0.004000] CPU: Processor Core ID: 1
[ 0.348143] CPU1: AMD Athlon(tm) 64 X2 Dual Core Processor 5600+ stepping 03
[ 0.348189] Brought up 2 CPUs
[ 0.348191] Total of 2 processors activated (11251.20 BogoMIPS).
[ 0.348273] CPU0 attaching sched-domain:
[ 0.348275] domain 0: span 0-1 level CPU
[ 0.348277] groups: 0 1
[ 0.348281] CPU1 attaching sched-domain:
[ 0.348282] domain 0: span 0-1 level CPU
[ 0.348284] groups: 1 0
[ 0.348331] net_namespace: 776 bytes
[ 0.348331] Booting paravirtualized kernel on bare hardware
[ 0.348331] Time: 5:33:31 Date: 06/11/09
[ 0.348331] regulator: core version 0.5
[ 0.348331] NET: Registered protocol family 16
[ 0.348331] EISA bus registered
[ 0.348331] ACPI: bus type pci registered
[ 0.348331] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
[ 0.348331] PCI: Not using MMCONFIG.
[ 0.348846] PCI: PCI BIOS revision 3.00 entry at 0xf0031, last bus=4
[ 0.348848] PCI: Using configuration type 1 for base access
[ 0.349414] ACPI: EC: Look up EC in DSDT
[ 0.359985] ACPI: Interpreter enabled
[ 0.359988] ACPI: (supports S0 S1 S3 S4 S5)
[ 0.360007] ACPI: Using IOAPIC for interrupt routing
[ 0.360051] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
[ 0.365294] PCI: MCFG area at e0000000 reserved in ACPI motherboard resources
[ 0.365296] PCI: Using MMCONFIG for extended config space
[ 0.372320] ACPI: No dock devices found.
[ 0.372373] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.372510] pci 0000:00:01.0: reg 10 io port: [0x900-0x9ff]
[ 0.372542] pci 0000:00:01.1: reg 10 io port: [0xe00-0xe3f]
[ 0.372550] pci 0000:00:01.1: reg 20 io port: [0x600-0x63f]
[ 0.372553] pci 0000:00:01.1: reg 24 io port: [0x700-0x73f]
[ 0.372562] pci 0000:00:01.1: PME# supported from D3hot D3cold
[ 0.372567] pci 0000:00:01.1: PME# disabled
[ 0.372606] pci 0000:00:02.0: reg 10 32bit mmio: [0xdfffb000-0xdfffbfff]
[ 0.372621] pci 0000:00:02.0: supports D1 D2
[ 0.372623] pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.372625] pci 0000:00:02.0: PME# disabled
[ 0.372645] pci 0000:00:02.1: reg 10 32bit mmio: [0xdfffac00-0xdfffacff]
[ 0.372661] pci 0000:00:02.1: supports D1 D2
[ 0.372663] pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.372665] pci 0000:00:02.1: PME# disabled
[ 0.372711] pci 0000:00:05.0: reg 10 32bit mmio: [0xdfff4000-0xdfff7fff]
[ 0.372726] pci 0000:00:05.0: PME# supported from D3hot D3cold
[ 0.372728] pci 0000:00:05.0: PME# disabled
[ 0.372756] pci 0000:00:06.0: reg 20 io port: [0xffa0-0xffaf]
[ 0.372782] pci 0000:00:07.0: reg 10 32bit mmio: [0xdfff9000-0xdfff9fff]
[ 0.372785] pci 0000:00:07.0: reg 14 io port: [0xe480-0xe487]
[ 0.372796] pci 0000:00:07.0: supports D1 D2
[ 0.372797] pci 0000:00:07.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.372801] pci 0000:00:07.0: PME# disabled
[ 0.372817] pci 0000:00:08.0: reg 10 io port: [0xe400-0xe407]
[ 0.372820] pci 0000:00:08.0: reg 14 io port: [0xe080-0xe083]
[ 0.372823] pci 0000:00:08.0: reg 18 io port: [0xe000-0xe007]
[ 0.372826] pci 0000:00:08.0: reg 1c io port: [0xdc00-0xdc03]
[ 0.372828] pci 0000:00:08.0: reg 20 io port: [0xd880-0xd88f]
[ 0.372831] pci 0000:00:08.0: reg 24 32bit mmio: [0xdfff8000-0xdfff8fff]
[ 0.372851] pci 0000:00:08.1: reg 10 io port: [0xd800-0xd807]
[ 0.372854] pci 0000:00:08.1: reg 14 io port: [0xd480-0xd483]
[ 0.372856] pci 0000:00:08.1: reg 18 io port: [0xd400-0xd407]
[ 0.372859] pci 0000:00:08.1: reg 1c io port: [0xd080-0xd083]
[ 0.372862] pci 0000:00:08.1: reg 20 io port: [0xd000-0xd00f]
[ 0.372865] pci 0000:00:08.1: reg 24 32bit mmio: [0xdffef000-0xdffeffff]
[ 0.372892] pci 0000:00:09.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.372894] pci 0000:00:09.0: PME# disabled
[ 0.372912] pci 0000:00:0b.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.372914] pci 0000:00:0b.0: PME# disabled
[ 0.372931] pci 0000:00:0c.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.372933] pci 0000:00:0c.0: PME# disabled
[ 0.372946] pci 0000:00:0d.0: reg 10 32bit mmio: [0xde000000-0xdeffffff]
[ 0.372950] pci 0000:00:0d.0: reg 14 64bit mmio: [0xc0000000-0xcfffffff]
[ 0.372954] pci 0000:00:0d.0: reg 1c 64bit mmio: [0xdd000000-0xddffffff]
[ 0.372958] pci 0000:00:0d.0: reg 30 32bit mmio: [0xdffc0000-0xdffdffff]
[ 0.373041] pci 0000:00:04.0: transparent bridge
[ 0.373141] bus 00 -> node 0
[ 0.373145] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.373344] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
[ 0.373459] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR10._PRT]
[ 0.373547] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR11._PRT]
[ 0.373634] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR12._PRT]
[ 0.379751] ACPI: PCI Interrupt Link [LNKA] (IRQs 16 17 18 19) *0, disabled.
[ 0.379952] ACPI: PCI Interrupt Link [LNKB] (IRQs 16 17 18 19) *0, disabled.
[ 0.380156] ACPI: PCI Interrupt Link [LNKC] (IRQs 16 17 18 19) *0, disabled.
[ 0.380359] ACPI: PCI Interrupt Link [LNKD] (IRQs 16 17 18 19) *0, disabled.
[ 0.380563] ACPI: PCI Interrupt Link [LNEA] (IRQs 16 17 18 19) *0, disabled.
[ 0.380764] ACPI: PCI Interrupt Link [LNEB] (IRQs 16 17 18 19) *0, disabled.
[ 0.380964] ACPI: PCI Interrupt Link [LNEC] (IRQs 16 17 18 19) *0, disabled.
[ 0.381164] ACPI: PCI Interrupt Link [LNED] (IRQs 16 17 18 19) *0, disabled.
[ 0.381367] ACPI: PCI Interrupt Link [LUB0] (IRQs 20 21 22 23) *5
[ 0.381570] ACPI: PCI Interrupt Link [LUB2] (IRQs 20 21 22 23) *11
[ 0.381773] ACPI: PCI Interrupt Link [LMAC] (IRQs 20 21 22 23) *5
[ 0.381976] ACPI: PCI Interrupt Link [LAZA] (IRQs 20 21 22 23) *10
[ 0.382180] ACPI: PCI Interrupt Link [LMC9] (IRQs 20 21 22 23) *11
[ 0.382384] ACPI: PCI Interrupt Link [LSMB] (IRQs 20 21 22 23) *10
[ 0.382584] ACPI: PCI Interrupt Link [LPMU] (IRQs 20 21 22 23) *0, disabled.
[ 0.382789] ACPI: PCI Interrupt Link [LSA0] (IRQs 20 21 22 23) *11
[ 0.382992] ACPI: PCI Interrupt Link [LSA1] (IRQs 20 21 22 23) *11
[ 0.383226] ACPI: PCI Interrupt Link [LATA] (IRQs 20 21 22 23) *0, disabled.
[ 0.383328] ACPI Warning (tbutils-0217): Incorrect checksum in table [OEMB] - DF, should be DA [20080926]
[ 0.383352] ACPI: WMI: Mapper loaded
[ 0.383388] SCSI subsystem initialized
[ 0.383388] libata version 3.00 loaded.
[ 0.383388] usbcore: registered new interface driver usbfs
[ 0.383388] usbcore: registered new interface driver hub
[ 0.383388] usbcore: registered new device driver usb
[ 0.383388] PCI: Using ACPI for IRQ routing
[ 0.388008] Bluetooth: Core ver 2.13
[ 0.388023] NET: Registered protocol family 31
[ 0.388023] Bluetooth: HCI device and connection manager initialized
[ 0.388023] Bluetooth: HCI socket layer initialized
[ 0.388023] NET: Registered protocol family 8
[ 0.388023] NET: Registered protocol family 20
[ 0.388024] NetLabel: Initializing
[ 0.388026] NetLabel: domain hash size = 128
[ 0.388027] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.388038] NetLabel: unlabeled traffic allowed by default
[ 0.388050] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 31
[ 0.388054] hpet0: 3 comparators, 32-bit 25.000000 MHz counter
[ 0.392053] AppArmor: AppArmor Filesystem Enabled
[ 0.396013] Switched to high resolution mode on CPU 0
[ 0.396203] Switched to high resolution mode on CPU 1
[ 0.400013] pnp: PnP ACPI init
[ 0.400019] ACPI: bus type pnp registered
[ 0.402573] pnp 00:06: io resource (0x900-0x97f) overlaps 0000:00:01.0 BAR 0 (0x900-0x9ff), disabling
[ 0.402576] pnp 00:06: io resource (0x980-0x9ff) overlaps 0000:00:01.0 BAR 0 (0x900-0x9ff), disabling
[ 0.405338] pnp: PnP ACPI: found 13 devices
[ 0.405339] ACPI: ACPI bus type pnp unregistered
[ 0.405342] PnPBIOS: Disabled by ACPI PNP
[ 0.405350] system 00:06: ioport range 0x4d0-0x4d1 has been reserved
[ 0.405352] system 00:06: ioport range 0x800-0x80f has been reserved
[ 0.405354] system 00:06: ioport range 0x500-0x57f has been reserved
[ 0.405356] system 00:06: ioport range 0x580-0x5ff has been reserved
[ 0.405358] system 00:06: ioport range 0x800-0x87f could not be reserved
[ 0.405360] system 00:06: ioport range 0x880-0x8ff has been reserved
[ 0.405362] system 00:06: ioport range 0xd00-0xd7f has been reserved
[ 0.405364] system 00:06: ioport range 0xd80-0xdff has been reserved
[ 0.405366] system 00:06: ioport range 0x1100-0x117f has been reserved
[ 0.405368] system 00:06: ioport range 0x1180-0x11ff has been reserved
[ 0.405370] system 00:06: iomem range 0xfec80000-0xfd93ffff could not be reserved
[ 0.405372] system 00:06: iomem range 0xfefe0000-0xfefe01ff has been reserved
[ 0.405375] system 00:06: iomem range 0xfefe1000-0xfefe1fff has been reserved
[ 0.405377] system 00:06: iomem range 0xfee01000-0xfeefffff has been reserved
[ 0.405381] system 00:08: iomem range 0xfec00000-0xfec00fff has been reserved
[ 0.405383] system 00:08: iomem range 0xfee00000-0xfee00fff has been reserved
[ 0.405385] system 00:08: iomem range 0x78000000-0x7fffffff has been reserved
[ 0.405389] system 00:09: ioport range 0x230-0x23f has been reserved
[ 0.405391] system 00:09: ioport range 0x290-0x29f has been reserved
[ 0.405392] system 00:09: ioport range 0xa00-0xa0f has been reserved
[ 0.405394] system 00:09: ioport range 0xa10-0xa1f has been reserved
[ 0.405398] system 00:0b: iomem range 0xe0000000-0xefffffff has been reserved
[ 0.405402] system 00:0c: iomem range 0x0-0x9ffff could not be reserved
[ 0.405404] system 00:0c: iomem range 0xc0000-0xcffff could not be reserved
[ 0.405406] system 00:0c: iomem range 0xe0000-0xfffff could not be reserved
[ 0.405408] system 00:0c: iomem range 0x100000-0x77ffffff could not be reserved
[ 0.405410] system 00:0c: iomem range 0xfec00000-0xffffffff could not be reserved
[ 0.440057] pci 0000:00:04.0: PCI bridge, secondary bus 0000:01
[ 0.440058] pci 0000:00:04.0: IO window: disabled
[ 0.440061] pci 0000:00:04.0: MEM window: disabled
[ 0.440063] pci 0000:00:04.0: PREFETCH window: disabled
[ 0.440067] pci 0000:00:09.0: PCI bridge, secondary bus 0000:02
[ 0.440068] pci 0000:00:09.0: IO window: disabled
[ 0.440070] pci 0000:00:09.0: MEM window: disabled
[ 0.440072] pci 0000:00:09.0: PREFETCH window: disabled
[ 0.440074] pci 0000:00:0b.0: PCI bridge, secondary bus 0000:03
[ 0.440076] pci 0000:00:0b.0: IO window: disabled
[ 0.440077] pci 0000:00:0b.0: MEM window: disabled
[ 0.440079] pci 0000:00:0b.0: PREFETCH window: disabled
[ 0.440082] pci 0000:00:0c.0: PCI bridge, secondary bus 0000:04
[ 0.440083] pci 0000:00:0c.0: IO window: disabled
[ 0.440085] pci 0000:00:0c.0: MEM window: disabled
[ 0.440087] pci 0000:00:0c.0: PREFETCH window: disabled
[ 0.440093] pci 0000:00:04.0: setting latency timer to 64
[ 0.440097] pci 0000:00:09.0: setting latency timer to 64
[ 0.440101] pci 0000:00:0b.0: setting latency timer to 64
[ 0.440104] pci 0000:00:0c.0: setting latency timer to 64
[ 0.440106] bus: 00 index 0 io port: [0x00-0xffff]
[ 0.440108] bus: 00 index 1 mmio: [0x000000-0xffffffff]
[ 0.440109] bus: 01 index 0 mmio: [0x0-0x0]
[ 0.440111] bus: 01 index 1 mmio: [0x0-0x0]
[ 0.440112] bus: 01 index 2 mmio: [0x0-0x0]
[ 0.440114] bus: 01 index 3 io port: [0x00-0xffff]
[ 0.440115] bus: 01 index 4 mmio: [0x000000-0xffffffff]
[ 0.440116] bus: 02 index 0 mmio: [0x0-0x0]
[ 0.440118] bus: 02 index 1 mmio: [0x0-0x0]
[ 0.440119] bus: 02 index 2 mmio: [0x0-0x0]
[ 0.440120] bus: 02 index 3 mmio: [0x0-0x0]
[ 0.440122] bus: 03 index 0 mmio: [0x0-0x0]
[ 0.440123] bus: 03 index 1 mmio: [0x0-0x0]
[ 0.440124] bus: 03 index 2 mmio: [0x0-0x0]
[ 0.440125] bus: 03 index 3 mmio: [0x0-0x0]
[ 0.440127] bus: 04 index 0 mmio: [0x0-0x0]
[ 0.440128] bus: 04 index 1 mmio: [0x0-0x0]
[ 0.440129] bus: 04 index 2 mmio: [0x0-0x0]
[ 0.440131] bus: 04 index 3 mmio: [0x0-0x0]
[ 0.440138] NET: Registered protocol family 2
[ 0.452053] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.452317] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.453134] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.453568] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.453570] TCP reno registered
[ 0.460099] NET: Registered protocol family 1
[ 0.460207] checking if image is initramfs... it is
[ 0.873505] Freeing initrd memory: 7366k freed
[ 0.873692] cpufreq: No nForce2 chipset.
[ 0.873790] audit: initializing netlink socket (disabled)
[ 0.873807] type=2000 audit(1244698410.872:1): initialized
[ 0.879563] highmem bounce pool size: 64 pages
[ 0.879566] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 0.880430] VFS: Disk quotas dquot_6.5.1
[ 0.880469] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.880902] fuse init (API version 7.10)
[ 0.880958] msgmni has been set to 1701
[ 0.881123] alg: No test for stdrng (krng)
[ 0.881135] io scheduler noop registered
[ 0.881136] io scheduler anticipatory registered
[ 0.881138] io scheduler deadline registered
[ 0.881149] io scheduler cfq registered (default)
[ 0.881177] pci 0000:00:00.0: Enabling HT MSI Mapping
[ 1.405491] pci 0000:00:04.0: Enabling HT MSI Mapping
[ 1.405506] pci 0000:00:05.0: Enabling HT MSI Mapping
[ 1.405530] pci 0000:00:07.0: Enabling HT MSI Mapping
[ 1.405543] pci 0000:00:08.0: Enabling HT MSI Mapping
[ 1.405556] pci 0000:00:08.1: Enabling HT MSI Mapping
[ 1.405569] pci 0000:00:09.0: Enabling HT MSI Mapping
[ 1.405582] pci 0000:00:0b.0: Enabling HT MSI Mapping
[ 1.405595] pci 0000:00:0c.0: Enabling HT MSI Mapping
[ 1.405608] pci 0000:00:0d.0: Boot video device
[ 1.410986] pcieport-driver 0000:00:09.0: setting latency timer to 64
[ 1.411005] pcieport-driver 0000:00:09.0: found MSI capability
[ 1.411019] pcieport-driver 0000:00:09.0: irq 2303 for MSI/MSI-X
[ 1.411023] pci_express 0000:00:09.0:pcie00: allocate port service
[ 1.411035] pci_express 0000:00:09.0:pcie03: allocate port service
[ 1.411062] pcieport-driver 0000:00:0b.0: setting latency timer to 64
[ 1.411078] pcieport-driver 0000:00:0b.0: found MSI capability
[ 1.411088] pcieport-driver 0000:00:0b.0: irq 2302 for MSI/MSI-X
[ 1.411092] pci_express 0000:00:0b.0:pcie00: allocate port service
[ 1.411100] pci_express 0000:00:0b.0:pcie03: allocate port service
[ 1.411126] pcieport-driver 0000:00:0c.0: setting latency timer to 64
[ 1.411143] pcieport-driver 0000:00:0c.0: found MSI capability
[ 1.411152] pcieport-driver 0000:00:0c.0: irq 2301 for MSI/MSI-X
[ 1.411156] pci_express 0000:00:0c.0:pcie00: allocate port service
[ 1.411165] pci_express 0000:00:0c.0:pcie03: allocate port service
[ 1.411200] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 1.411207] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 1.411310] input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
[ 1.411312] ACPI: Power Button (FF) [PWRF]
[ 1.411348] input: Power Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
[ 1.411350] ACPI: Power Button (CM) [PWRB]
[ 1.411693] processor ACPI_CPU:00: registered as cooling_device0
[ 1.411888] processor ACPI_CPU:01: registered as cooling_device1
[ 1.415036] isapnp: Scanning for PnP cards...
[ 1.768311] isapnp: No Plug & Play device found
[ 1.776668] Serial: 8250/16550 driver4 ports, IRQ sharing enabled
[ 1.776749] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 1.776986] 00:0a: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 1.777507] brd: module loaded
[ 1.777738] loop: module loaded
[ 1.777781] Fixed MDIO Bus: probed
[ 1.777786] PPP generic driver version 2.4.2
[ 1.777827] input: Macintosh mouse button emulation as /devices/virtual/input/input2
[ 1.777849] Driver 'sd' needs updating - please use bus_type methods
[ 1.777855] Driver 'sr' needs updating - please use bus_type methods
[ 1.777988] sata_nv 0000:00:08.0: version 3.5
[ 1.778281] ACPI: PCI Interrupt Link [LSA0] enabled at IRQ 23
[ 1.778290] sata_nv 0000:00:08.0: PCI INT A -> Link[LSA0] -> GSI 23 (level, low) -> IRQ 23
[ 1.778332] sata_nv 0000:00:08.0: setting latency timer to 64
[ 1.778392] scsi0 : sata_nv
[ 1.778462] scsi1 : sata_nv
[ 1.778565] ata1: SATA max UDMA/133 cmd 0xe400 ctl 0xe080 bmdma 0xd880 irq 23
[ 1.778567] ata2: SATA max UDMA/133 cmd 0xe000 ctl 0xdc00 bmdma 0xd888 irq 23
[ 2.244032] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 2.252281] ata1.00: ATA-8: Hitachi HDP725032GLA360, GM3OA52A, max UDMA/133
[ 2.252283] ata1.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 2.268285] ata1.00: configured for UDMA/133
[ 2.736033] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 2.775759] ata2.00: ATA-7: MAXTOR STM3160211AS, 3.AAE, max UDMA/133
[ 2.775761] ata2.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 2.842403] ata2.00: configured for UDMA/133
[ 2.842496] scsi 0:0:0:0: Direct-Access ATA Hitachi HDP72503 GM3O PQ: 0 ANSI: 5
[ 2.842569] sd 0:0:0:0: [sda] 625142448 512-byte hardware sectors: (320 GB/298 GiB)
[ 2.842580] sd 0:0:0:0: [sda] Write Protect is off
[ 2.842582] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.842599] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.842647] sd 0:0:0:0: [sda] 625142448 512-byte hardware sectors: (320 GB/298 GiB)
[ 2.842656] sd 0:0:0:0: [sda] Write Protect is off
[ 2.842658] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.842673] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.842676] sda: sda1 sda2 sda3
[ 2.866688] sd 0:0:0:0: [sda] Attached SCSI disk
[ 2.866719] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 2.866767] scsi 1:0:0:0: Direct-Access ATA MAXTOR STM316021 3.AA PQ: 0 ANSI: 5
[ 2.866821] sd 1:0:0:0: [sdb] 312581808 512-byte hardware sectors: (160 GB/149 GiB)
[ 2.866830] sd 1:0:0:0: [sdb] Write Protect is off
[ 2.866831] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 2.866846] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.866881] sd 1:0:0:0: [sdb] 312581808 512-byte hardware sectors: (160 GB/149 GiB)
[ 2.866890] sd 1:0:0:0: [sdb] Write Protect is off
[ 2.866892] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 2.866906] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.866909] sdb: sdb1
[ 2.890435] sd 1:0:0:0: [sdb] Attached SCSI disk
[ 2.890459] sd 1:0:0:0: Attached scsi generic sg1 type 0
[ 2.890758] ACPI: PCI Interrupt Link [LSA1] enabled at IRQ 22
[ 2.890764] sata_nv 0000:00:08.1: PCI INT B -> Link[LSA1] -> GSI 22 (level, low) -> IRQ 22
[ 2.890792] sata_nv 0000:00:08.1: setting latency timer to 64
[ 2.890840] scsi2 : sata_nv
[ 2.890903] scsi3 : sata_nv
[ 2.891003] ata3: SATA max UDMA/133 cmd 0xd800 ctl 0xd480 bmdma 0xd000 irq 22
[ 2.891005] ata4: SATA max UDMA/133 cmd 0xd400 ctl 0xd080 bmdma 0xd008 irq 22
[ 3.356031] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 3.393741] ata3.00: ATA-7: ST3160812AS, 3.AAD, max UDMA/133
[ 3.393743] ata3.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 3.460386] ata3.00: configured for UDMA/133
[ 3.782226] scsi 2:0:0:0: Direct-Access ATA ST3160812AS 3.AA PQ: 0 ANSI: 5
[ 3.782284] sd 2:0:0:0: [sdc] 312581808 512-byte hardware sectors: (160 GB/149 GiB)
[ 3.782293] sd 2:0:0:0: [sdc] Write Protect is off
[ 3.782294] sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00
[ 3.782309] sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 3.782340] sd 2:0:0:0: [sdc] 312581808 512-byte hardware sectors: (160 GB/149 GiB)
[ 3.782349] sd 2:0:0:0: [sdc] Write Protect is off
[ 3.782351] sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00
[ 3.782365] sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 3.782368] sdc: sdc1
[ 3.799951] sd 2:0:0:0: [sdc] Attached SCSI disk
[ 3.799976] sd 2:0:0:0: Attached scsi generic sg2 type 0
[ 3.800037] pata_amd 0000:00:06.0: version 0.3.10
[ 3.800065] pata_amd 0000:00:06.0: setting latency timer to 64
[ 3.800139] scsi4 : pata_amd
[ 3.800188] scsi5 : pata_amd
[ 3.800710] ata5: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14
[ 3.800712] ata6: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15
[ 3.964276] ata5.00: ATAPI: TSSTcorpCD/DVDW SH-S182D, SB02, max UDMA/33
[ 3.964295] ata5: nv_mode_filter: 0x739f&0x701f->0x701f, BIOS=0x7000 (0xc0000000) ACPI=0x701f (60:900:0x11)
[ 3.980222] ata5.00: configured for UDMA/33
[ 3.980650] ata6: port disabled. ignoring.
[ 3.981485] scsi 4:0:0:0: CD-ROM TSSTcorp CD/DVDW SH-S182D SB02 PQ: 0 ANSI: 5
[ 3.988739] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[ 3.988742] Uniform CD-ROM driver Revision: 3.20
[ 3.988805] sr 4:0:0:0: Attached scsi CD-ROM sr0
[ 3.988830] sr 4:0:0:0: Attached scsi generic sg3 type 5
[ 3.989189] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 3.989482] ACPI: PCI Interrupt Link [LUB2] enabled at IRQ 21
[ 3.989488] ehci_hcd 0000:00:02.1: PCI INT B -> Link[LUB2] -> GSI 21 (level, low) -> IRQ 21
[ 3.989499] ehci_hcd 0000:00:02.1: setting latency timer to 64
[ 3.989501] ehci_hcd 0000:00:02.1: EHCI Host Controller
[ 3.989542] ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 1
[ 3.989567] ehci_hcd 0000:00:02.1: debug port 1
[ 3.989570] ehci_hcd 0000:00:02.1: cache line size of 64 is not supported
[ 3.989584] ehci_hcd 0000:00:02.1: irq 21, io mem 0xdfffac00
[ 4.000019] ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00
[ 4.000080] usb usb1: configuration #1 chosen from 1 choice
[ 4.000100] hub 1-0:1.0: USB hub found
[ 4.000108] hub 1-0:1.0: 10 ports detected
[ 4.000187] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 4.000475] ACPI: PCI Interrupt Link [LUB0] enabled at IRQ 20
[ 4.000481] ohci_hcd 0000:00:02.0: PCI INT A -> Link[LUB0] -> GSI 20 (level, low) -> IRQ 20
[ 4.000488] ohci_hcd 0000:00:02.0: setting latency timer to 64
[ 4.000490] ohci_hcd 0000:00:02.0: OHCI Host Controller
[ 4.000530] ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 2
[ 4.000548] ohci_hcd 0000:00:02.0: irq 20, io mem 0xdfffb000
[ 4.058033] usb usb2: configuration #1 chosen from 1 choice
[ 4.058051] hub 2-0:1.0: USB hub found
[ 4.058058] hub 2-0:1.0: 10 ports detected
[ 4.058125] uhci_hcd: USB Universal Host Controller Interface driver
[ 4.058162] usbcore: registered new interface driver libusual
[ 4.058184] usbcore: registered new interface driver usbserial
[ 4.058198] USB Serial support registered for generic
[ 4.058207] usbcore: registered new interface driver usbserial_generic
[ 4.058208] usbserial: USB Serial Driver core
[ 4.058242] PNP: No PS/2 controller found. Probing ports directly.
[ 4.058569] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 4.058573] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 4.060531] mice: PS/2 mouse device common for all mice
[ 4.072560] rtc_cmos 00:02: RTC can wake from S4
[ 4.072588] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[ 4.072625] rtc0: alarms up to one year, y3k, 114 bytes nvram, hpet irqs
[ 4.072665] device-mapper: uevent: version 1.0.3
[ 4.072736] device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-devel@redhat.com
[ 4.072869] device-mapper: multipath: version 1.0.5 loaded
[ 4.072871] device-mapper: multipath round-robin: version 1.0.0 loaded
[ 4.072950] EISA: Probing bus 0 at eisa.0
[ 4.072971] EISA: Detected 0 cards.
[ 4.073061] cpuidle: using governor ladder
[ 4.073063] cpuidle: using governor menu
[ 4.073420] TCP cubic registered
[ 4.073485] NET: Registered protocol family 10
[ 4.073799] lo: Disabled Privacy Extensions
[ 4.074018] NET: Registered protocol family 17
[ 4.074030] Bluetooth: L2CAP ver 2.11
[ 4.074031] Bluetooth: L2CAP socket layer initialized
[ 4.074033] Bluetooth: SCO (Voice Link) ver 0.6
[ 4.074035] Bluetooth: SCO socket layer initialized
[ 4.074078] Bluetooth: RFCOMM socket layer initialized
[ 4.074084] Bluetooth: RFCOMM TTY layer initialized
[ 4.074086] Bluetooth: RFCOMM ver 1.10
[ 4.074127] powernow-k8: Found 1 AMD Athlon(tm) 64 X2 Dual Core Processor 5600+ processors (2 cpu cores) (version 2.20.00)
[ 4.074182] powernow-k8: 0 : fid 0x14 (2800 MHz), vid 0xa
[ 4.074184] powernow-k8: 1 : fid 0x12 (2600 MHz), vid 0xc
[ 4.074186] powernow-k8: 2 : fid 0x10 (2400 MHz), vid 0xe
[ 4.074187] powernow-k8: 3 : fid 0xe (2200 MHz), vid 0x10
[ 4.074189] powernow-k8: 4 : fid 0xc (2000 MHz), vid 0x10
[ 4.074190] powernow-k8: 5 : fid 0xa (1800 MHz), vid 0x10
[ 4.074191] powernow-k8: 6 : fid 0x2 (1000 MHz), vid 0x12
[ 4.074399] powernow-k8: ph2 null fid transition 0x14
[ 4.074477] Using IPI No-Shortcut mode
[ 4.074560] registered taskstats version 1
[ 4.074686] Magic number: 13:382:567
[ 4.074688] misc network_latency: hash matches
[ 4.074821] rtc_cmos 00:02: setting system clock to 2009-06-11 05:33:34 UTC (1244698414)
[ 4.074823] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 4.074825] EDD information not available.
[ 4.075366] Freeing unused kernel memory: 532k freed
[ 4.075474] Write protecting the kernel text: 4128k
[ 4.075511] Write protecting the kernel read-only data: 1532k
[ 4.248483] forcedeth: Reverse Engineered nForce ethernet driver. Version 0.61.
[ 4.248870] ACPI: PCI Interrupt Link [LMAC] enabled at IRQ 23
[ 4.248874] forcedeth 0000:00:07.0: PCI INT A -> Link[LMAC] -> GSI 23 (level, low) -> IRQ 23
[ 4.248878] forcedeth 0000:00:07.0: setting latency timer to 64
[ 4.313885] forcedeth 0000:00:07.0: ifname eth0, PHY OUI 0x732 @ 3, addr 00:24:8c:49:3e:78
[ 4.313889] forcedeth 0000:00:07.0: highdma pwrctl mgmt timirq gbit lnktim msi desc-v3
[ 4.314808] usb 1-1: new high speed USB device using ehci_hcd and address 2
[ 4.473169] usb 1-1: configuration #1 chosen from 1 choice
[ 4.595152] PM: Starting manual resume from disk
[ 4.595155] PM: Resume from partition 8:2
[ 4.595157] PM: Checking hibernation image.
[ 4.595248] PM: Resume from disk failed.
[ 4.608720] EXT4-fs: barriers enabled
[ 4.621418] kjournald2 starting. Commit interval 5 seconds
[ 4.621425] EXT4-fs: delayed allocation enabled
[ 4.621426] EXT4-fs: file extents enabled
[ 4.622164] EXT4-fs: mballoc enabled
[ 4.622168] EXT4-fs: mounted filesystem with ordered data mode.
[ 4.892519] usb 2-3: new low speed USB device using ohci_hcd and address 2
[ 5.130091] usb 2-3: configuration #1 chosen from 1 choice
[ 5.436516] usb 2-4: new low speed USB device using ohci_hcd and address 3
[ 5.651091] usb 2-4: configuration #1 chosen from 1 choice
[ 8.386110] udev: starting version 141
[ 9.036259] parport_pc 00:05: reported by Plug and Play ACPI
[ 9.036305] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
[ 9.071672] Linux agpgart interface v0.103
[ 9.109520] i2c-adapter i2c-0: nForce2 SMBus adapter at 0x600
[ 9.109548] i2c-adapter i2c-1: nForce2 SMBus adapter at 0x700
[ 9.132410] usbcore: registered new interface driver hiddev
[ 9.145305] input: Logitech HID compliant keyboard as /devices/pci0000:00/0000:00:02.0/usb2/2-3/2-3:1.0/input/input3
[ 9.150965] generic-usb 0003:046D:C30E.0001: input,hidraw0: USB HID v1.10 Keyboard [Logitech HID compliant keyboard] on usb-0000:00:02.0-3/input0
[ 9.159243] Linux video capture interface: v2.00
[ 9.174149] input: Logitech HID compliant keyboard as /devices/pci0000:00/0000:00:02.0/usb2/2-3/2-3:1.1/input/input4
[ 9.176310] generic-usb 0003:046D:C30E.0002: input,hidraw1: USB HID v1.10 Device [Logitech HID compliant keyboard] on usb-0000:00:02.0-3/input1
[ 9.183265] input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:02.0/usb2/2-4/2-4:1.0/input/input5
[ 9.187940] generic-usb 0003:046D:C044.0003: input,hidraw2: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:02.0-4/input0
[ 9.187958] usbcore: registered new interface driver usbhid
[ 9.187973] usbhid: v2.6:USB HID core driver
[ 9.219256] ppdev: user-space parallel port driver
[ 9.335931] nvidia: module license 'NVIDIA' taints kernel.
[ 9.589489] ACPI: PCI Interrupt Link [LMC9] enabled at IRQ 22
[ 9.589494] nvidia 0000:00:0d.0: PCI INT A -> Link[LMC9] -> GSI 22 (level, low) -> IRQ 22
[ 9.589499] nvidia 0000:00:0d.0: setting latency timer to 64
[ 9.590431] NVRM: loading NVIDIA UNIX x86 Kernel Module 180.44 Mon Mar 23 14:59:10 PST 2009
[ 9.595919] uvcvideo: Found UVC 1.00 device Hercules Dualpix Exchange (06f8:3005)
[ 9.600539] input: Hercules Dualpix Exchange as /devices/pci0000:00/0000:00:02.1/usb1/1-1/1-1:1.0/input/input6
[ 9.606386] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 9.608801] usbcore: registered new interface driver uvcvideo
[ 9.608820] USB Video Class driver (v0.1.0)
[ 9.688100] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[ 9.688273] CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use
[ 9.688275] nf_conntrack.acct=1 kernel paramater, acct=1 nf_conntrack module option or
[ 9.688277] sysctl net.netfilter.nf_conntrack_acct=1 to enable it.
[ 9.755152] ACPI: PCI Interrupt Link [LAZA] enabled at IRQ 21
[ 9.755157] HDA Intel 0000:00:05.0: PCI INT B -> Link[LAZA] -> GSI 21 (level, low) -> IRQ 21
[ 9.755236] HDA Intel 0000:00:05.0: setting latency timer to 64
[ 9.765355] 2:3:1: cannot get freq at ep 0x84
[ 9.773933] usbcore: registered new interface driver snd-usb-audio
[ 10.430498] lp0: using parport0 (interrupt-driven).
[ 10.480914] Adding 1951888k swap on /dev/sda2. Priority:-1 extents:1 across:1951888k
[ 11.006023] EXT4 FS on sda1, internal journal on sda1:8
[ 11.696572] EXT4-fs: barriers enabled
[ 11.696723] kjournald2 starting. Commit interval 5 seconds
[ 11.696943] EXT4 FS on sda3, internal journal on sda3:8
[ 11.696945] EXT4-fs: delayed allocation enabled
[ 11.696946] EXT4-fs: file extents enabled
[ 11.706065] EXT4-fs: mballoc enabled
[ 11.706069] EXT4-fs: mounted filesystem with ordered data mode.
[ 11.926674] type=1505 audit(1244698422.349:2): operation="profile_load" name="/usr/share/gdm/guest-session/Xsession" name2="default" pid=2156
[ 11.963343] type=1505 audit(1244698422.385:3): operation="profile_load" name="/sbin/dhclient-script" name2="default" pid=2160
[ 11.963469] type=1505 audit(1244698422.385:4): operation="profile_load" name="/sbin/dhclient3" name2="default" pid=2160
[ 11.963504] type=1505 audit(1244698422.385:5): operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" name2="default" pid=2160
[ 11.963539] type=1505 audit(1244698422.385:6): operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" name2="default" pid=2160
[ 12.075428] type=1505 audit(1244698422.497:7): operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" name2="default" pid=2165
[ 12.075614] type=1505 audit(1244698422.497:8): operation="profile_load" name="/usr/sbin/cupsd" name2="default" pid=2165
[ 12.097009] type=1505 audit(1244698422.521:9): operation="profile_load" name="/usr/sbin/tcpdump" name2="default" pid=2169
[ 13.635359] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 13.635362] Bluetooth: BNEP filters: protocol multicast
[ 13.664611] Bridge firewalling registered

que vois tu et que peut tu m'expliquer ?

Dernière modification par Dr.BUg (Le 11/06/2009, à 10:36)

Ehorinn · Le 11/06/2009, à 11:03

On voit plein de ligne qui servent pas a grand chose XD

[    0.000000] Linux version 2.6.28-11-generic (buildd@palmer) (gcc version 4.3.3 (Ubuntu 4.3.3-5ubuntu4) ) #42-Ubuntu SMP Fri Apr 17 01:57:59 UTC 2009 (Ubuntu 2.6.28-11.42-generic)

Les infos sur le système, surtout le noyau
(On peux les avoir avec la commande uname -a)

[    0.004000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[    0.004000] CPU: L2 Cache: 1024K (64 bytes/line)
[    0.004000] CPU: Physical Processor ID: 0
[    0.004000] CPU: Processor Core ID: 0
...
[    0.261879] CPU0: AMD Athlon(tm) 64 X2 Dual Core Processor 5600+ stepping 03
...
[    0.004000] CPU: Physical Processor ID: 0
[    0.004000] CPU: Processor Core ID: 1

Il trouve le premier processeur puis le deuxième.

Et ça continue, on voit :

L'ACPI, qui gère les appuie sur le bouton marche/arret, la mise en veille, la gestionde la batterie

usbcore, détecte l'insertion et le débrachement des périphérique USB
(On peux les lister avec lsusb)

pci, les carte à l'intérieur
(On peux les lister avec lspci)

Bluetooth, ca parle de lui-même

Il y a également les disques durs (1 de 320Go, 2 de 160Go), qui sont respectivement sda, sdb et sdc.

---

Tu as peut-être des questions plus spécifiques, tu peux chercher avec un moteur de recherche (et tu risques de tomber sur des postd de ce genre ) et/ou demander ici (et espérer quelqu'un de plus qualifié).

Dernière modification par Ehorinn (Le 11/06/2009, à 11:03)

Dr.BUg · Le 11/06/2009, à 11:41

Je te remercie, pour l'instant je cherche juste à comprendre les logs et bien sûr à déceler les erreurs - je posterais la suite prochainement

Ubuntu-fr

Navigation

Liens de recherche

Annonce

#1 Le 11/06/2009, à 08:44

Lecture des journaux sur Jaunty

#2 Le 11/06/2009, à 09:47

Re : Lecture des journaux sur Jaunty

#3 Le 11/06/2009, à 10:32

Re : Lecture des journaux sur Jaunty

#4 Le 11/06/2009, à 11:03

Re : Lecture des journaux sur Jaunty

#5 Le 11/06/2009, à 11:41

Re : Lecture des journaux sur Jaunty

Pied de page des forums