#26 Le 25/09/2010, à 17:55
- Stemp
Re : bisoncam ali webcam intégré Grrr !
Jean-François m'avait dirigé vers Erik Andrén (erik POINT andren AT gmail POINT com), mais j'ai beau regarder mes courriels, je ne trouve pas mon message. Conclusion logique : j'ai la mémoire et la capacité intellectuelle d'un écureuil
«La violence n'a jamais rien réglé» Gengis Khan 1162-1227
Blog | Crunchbang Linux | Arch Linux
Hors ligne
#27 Le 17/02/2011, à 12:03
- loprud
Re : bisoncam ali webcam intégré Grrr !
Suis dans le même cas suis sous Ubuntu 10.04
Après le passage à 10.04, la cam a fonctionné. Suite aux mise à jour du noyau elle a cessé de fonctionner.
Voici ce que donne lsusb:
shs@shs-laptop:~$ lsusb
Bus 008 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 002: ID 046d:c52f Logitech, Inc.
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 002: ID 0402:5606 ALi Corp. USB 2.0 Camera
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
shs@shs-laptop:~$
Gstreamer-properties me donnes:
shs@shs-laptop:~$ gstreamer-properties
gstreamer-properties-Message: Skipping unavailable plugin 'artsdsink'
gstreamer-properties-Message: Skipping unavailable plugin 'glimagesink'
gstreamer-properties-Message: Skipping unavailable plugin 'sdlvideosink'
gstreamer-properties-Message: Skipping unavailable plugin 'v4lmjpegsrc'
gstreamer-properties-Message: Skipping unavailable plugin 'qcamsrc'
gstreamer-properties-Message: Skipping unavailable plugin 'esdmon'
shs@shs-laptop:~$
dès que je lance le test, pas d'apparition de la fenêtre d'image.
Vérification en suivant les posts:
shs@shs-laptop:~$ cd /lib/modules/`uname -r`/kernel/drivers/media/video/gspca
shs@shs-laptop:/lib/modules/2.6.32-29-generic/kernel/drivers/media/video/gspca$
Résultat de la commande dmsg:
[ 0.255224] pci 0000:00:1c.0: IO window: 0x5000-0x5fff
[ 0.255230] pci 0000:00:1c.0: MEM window: 0xf0500000-0xf05fffff
[ 0.255234] pci 0000:00:1c.0: PREFETCH window: 0x00000080000000-0x000000801fffff
[ 0.255241] pci 0000:00:1c.1: PCI bridge, secondary bus 0000:04
[ 0.255245] pci 0000:00:1c.1: IO window: 0x2000-0x2fff
[ 0.255250] pci 0000:00:1c.1: MEM window: 0xb8000000-0xbbffffff
[ 0.255255] pci 0000:00:1c.1: PREFETCH window: 0x000000c8000000-0x000000cbffffff
[ 0.255262] pci 0000:00:1c.2: PCI bridge, secondary bus 0000:06
[ 0.255265] pci 0000:00:1c.2: IO window: 0x3000-0x3fff
[ 0.255270] pci 0000:00:1c.2: MEM window: 0xb0000000-0xb3ffffff
[ 0.255275] pci 0000:00:1c.2: PREFETCH window: 0x000000c0000000-0x000000c3ffffff
[ 0.255282] pci 0000:00:1c.3: PCI bridge, secondary bus 0000:08
[ 0.255285] pci 0000:00:1c.3: IO window: 0x4000-0x4fff
[ 0.255291] pci 0000:00:1c.3: MEM window: 0xf0600000-0xf06fffff
[ 0.255295] pci 0000:00:1c.3: PREFETCH window: 0x000000f0b00000-0x000000f0bfffff
[ 0.255302] pci 0000:00:1c.4: PCI bridge, secondary bus 0000:09
[ 0.255306] pci 0000:00:1c.4: IO window: 0x6000-0x6fff
[ 0.255311] pci 0000:00:1c.4: MEM window: 0xf0700000-0xf07fffff
[ 0.255316] pci 0000:00:1c.4: PREFETCH window: 0x00000080200000-0x000000803fffff
[ 0.255323] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:0a
[ 0.255324] pci 0000:00:1e.0: IO window: disabled
[ 0.255330] pci 0000:00:1e.0: MEM window: disabled
[ 0.255334] pci 0000:00:1e.0: PREFETCH window: disabled
[ 0.255356] alloc irq_desc for 17 on node -1
[ 0.255358] alloc kstat_irqs on node -1
[ 0.255366] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 0.255371] pci 0000:00:1c.0: setting latency timer to 64
[ 0.255380] alloc irq_desc for 16 on node -1
[ 0.255382] alloc kstat_irqs on node -1
[ 0.255386] pci 0000:00:1c.1: PCI INT B -> GSI 16 (level, low) -> IRQ 16
[ 0.255390] pci 0000:00:1c.1: setting latency timer to 64
[ 0.255399] alloc irq_desc for 18 on node -1
[ 0.255401] alloc kstat_irqs on node -1
[ 0.255404] pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 0.255409] pci 0000:00:1c.2: setting latency timer to 64
[ 0.255418] alloc irq_desc for 19 on node -1
[ 0.255419] alloc kstat_irqs on node -1
[ 0.255423] pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[ 0.255427] pci 0000:00:1c.3: setting latency timer to 64
[ 0.255437] pci 0000:00:1c.4: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 0.255441] pci 0000:00:1c.4: setting latency timer to 64
[ 0.255449] pci 0000:00:1e.0: setting latency timer to 64
[ 0.255454] pci_bus 0000:00: resource 0 io: [0x00-0xffff]
[ 0.255456] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff]
[ 0.255459] pci_bus 0000:02: resource 0 io: [0x5000-0x5fff]
[ 0.255461] pci_bus 0000:02: resource 1 mem: [0xf0500000-0xf05fffff]
[ 0.255464] pci_bus 0000:02: resource 2 pref mem [0x80000000-0x801fffff]
[ 0.255466] pci_bus 0000:04: resource 0 io: [0x2000-0x2fff]
[ 0.255468] pci_bus 0000:04: resource 1 mem: [0xb8000000-0xbbffffff]
[ 0.255471] pci_bus 0000:04: resource 2 pref mem [0xc8000000-0xcbffffff]
[ 0.255473] pci_bus 0000:06: resource 0 io: [0x3000-0x3fff]
[ 0.255476] pci_bus 0000:06: resource 1 mem: [0xb0000000-0xb3ffffff]
[ 0.255478] pci_bus 0000:06: resource 2 pref mem [0xc0000000-0xc3ffffff]
[ 0.255481] pci_bus 0000:08: resource 0 io: [0x4000-0x4fff]
[ 0.255483] pci_bus 0000:08: resource 1 mem: [0xf0600000-0xf06fffff]
[ 0.255485] pci_bus 0000:08: resource 2 pref mem [0xf0b00000-0xf0bfffff]
[ 0.255488] pci_bus 0000:09: resource 0 io: [0x6000-0x6fff]
[ 0.255490] pci_bus 0000:09: resource 1 mem: [0xf0700000-0xf07fffff]
[ 0.255492] pci_bus 0000:09: resource 2 pref mem [0x80200000-0x803fffff]
[ 0.255495] pci_bus 0000:0a: resource 3 io: [0x00-0xffff]
[ 0.255497] pci_bus 0000:0a: resource 4 mem: [0x000000-0xffffffff]
[ 0.255538] NET: Registered protocol family 2
[ 0.255644] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.255994] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.256518] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.256814] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.256817] TCP reno registered
[ 0.256970] NET: Registered protocol family 1
[ 0.256996] pci 0000:00:02.0: Boot video device
[ 0.257167] Simple Boot Flag at 0x36 set to 0x1
[ 0.257339] cpufreq-nforce2: No nForce2 chipset.
[ 0.257366] Scanning for low memory corruption every 60 seconds
[ 0.257471] audit: initializing netlink socket (disabled)
[ 0.257483] type=2000 audit(1297935728.255:1): initialized
[ 0.266829] highmem bounce pool size: 64 pages
[ 0.266835] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 0.268403] VFS: Disk quotas dquot_6.5.2
[ 0.268471] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.269034] fuse init (API version 7.13)
[ 0.269118] msgmni has been set to 1691
[ 0.269340] alg: No test for stdrng (krng)
[ 0.269396] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.269399] io scheduler noop registered
[ 0.269401] io scheduler anticipatory registered
[ 0.269403] io scheduler deadline registered
[ 0.269441] io scheduler cfq registered (default)
[ 0.269609] alloc irq_desc for 24 on node -1
[ 0.269611] alloc kstat_irqs on node -1
[ 0.269622] pcieport 0000:00:1c.0: irq 24 for MSI/MSI-X
[ 0.269633] pcieport 0000:00:1c.0: setting latency timer to 64
[ 0.269760] alloc irq_desc for 25 on node -1
[ 0.269762] alloc kstat_irqs on node -1
[ 0.269769] pcieport 0000:00:1c.1: irq 25 for MSI/MSI-X
[ 0.269778] pcieport 0000:00:1c.1: setting latency timer to 64
[ 0.269902] alloc irq_desc for 26 on node -1
[ 0.269904] alloc kstat_irqs on node -1
[ 0.269912] pcieport 0000:00:1c.2: irq 26 for MSI/MSI-X
[ 0.269921] pcieport 0000:00:1c.2: setting latency timer to 64
[ 0.270044] alloc irq_desc for 27 on node -1
[ 0.270045] alloc kstat_irqs on node -1
[ 0.270053] pcieport 0000:00:1c.3: irq 27 for MSI/MSI-X
[ 0.270061] pcieport 0000:00:1c.3: setting latency timer to 64
[ 0.270186] alloc irq_desc for 28 on node -1
[ 0.270188] alloc kstat_irqs on node -1
[ 0.270196] pcieport 0000:00:1c.4: irq 28 for MSI/MSI-X
[ 0.270205] pcieport 0000:00:1c.4: setting latency timer to 64
[ 0.270303] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.270474] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.270893] ACPI Error (psargs-0359): [\_PR_.CPU0._PPC] Namespace lookup failure, AE_NOT_FOUND
[ 0.270930] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.ADP0.ADJP] (Node f7016bd0), AE_NOT_FOUND
[ 0.270959] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.ADP0._PSR] (Node f7016ba0), AE_NOT_FOUND
[ 0.270986] ACPI Exception: AE_NOT_FOUND, Error reading AC Adapter state (20090903/ac-140)
[ 0.271069] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0
[ 0.271663] ACPI: Lid Switch [LID0]
[ 0.271716] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
[ 0.271721] ACPI: Power Button [PWRB]
[ 0.271762] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input2
[ 0.271767] ACPI: Sleep Button [SLPB]
[ 0.271812] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[ 0.271814] ACPI: Power Button [PWRF]
[ 0.272717] ACPI: SSDT 7db1ac20 00265 (v01 PmRef Cpu0Ist 00003000 INTL 20050624)
[ 0.274913] processor LNXCPU:00: registered as cooling_device0
[ 0.275376] ACPI: SSDT 7db19ca0 001CF (v01 PmRef ApIst 00003000 INTL 20050624)
[ 0.276367] processor LNXCPU:01: registered as cooling_device1
[ 0.287422] thermal LNXTHERM:01: registered as thermal_zone0
[ 0.287433] ACPI: Thermal Zone [THM0] (50 C)
[ 0.289003] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.290333] brd: module loaded
[ 0.290793] loop: module loaded
[ 0.290888] input: Macintosh mouse button emulation as /devices/virtual/input/input4
[ 0.291000] ata_piix 0000:00:1f.2: version 2.13
[ 0.291019] ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 0.291024] ata_piix 0000:00:1f.2: MAP [ P0 -- P1 -- ]
[ 0.291072] ata_piix 0000:00:1f.2: setting latency timer to 64
[ 0.291244] scsi0 : ata_piix
[ 0.291693] scsi1 : ata_piix
[ 0.291764] ata1: SATA max UDMA/133 cmd 0x18f8 ctl 0x180c bmdma 0x18e0 irq 19
[ 0.291768] ata2: SATA max UDMA/133 cmd 0x18f0 ctl 0x1808 bmdma 0x18e8 irq 19
[ 0.291792] ata_piix 0000:00:1f.5: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 0.291797] ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ]
[ 0.291842] ata_piix 0000:00:1f.5: setting latency timer to 64
[ 0.292102] scsi2 : ata_piix
[ 0.292204] scsi3 : ata_piix
[ 0.292309] ata3: SATA max UDMA/133 cmd 0x1c50 ctl 0x1c44 bmdma 0x1c30 irq 19
[ 0.292313] ata4: SATA max UDMA/133 cmd 0x1c48 ctl 0x1c40 bmdma 0x1c38 irq 19
[ 0.292640] Fixed MDIO Bus: probed
[ 0.292702] PPP generic driver version 2.4.2
[ 0.292751] tun: Universal TUN/TAP device driver, 1.6
[ 0.292753] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 0.292841] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.292862] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 19 (level, low) -> IRQ 19
[ 0.292881] ehci_hcd 0000:00:1a.7: setting latency timer to 64
[ 0.292884] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[ 0.292918] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
[ 0.292948] ehci_hcd 0000:00:1a.7: debug port 1
[ 0.296829] ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported
[ 0.296859] ehci_hcd 0000:00:1a.7: irq 19, io mem 0xf0a04000
[ 0.299968] isapnp: Scanning for PnP cards...
[ 0.305962] ACPI: Battery Slot [BAT0] (battery present)
[ 0.311741] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[ 0.311849] usb usb1: configuration #1 chosen from 1 choice
[ 0.311878] hub 1-0:1.0: USB hub found
[ 0.311886] hub 1-0:1.0: 6 ports detected
[ 0.311961] alloc irq_desc for 23 on node -1
[ 0.311963] alloc kstat_irqs on node -1
[ 0.311969] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 0.311987] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 0.311990] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 0.312027] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
[ 0.312053] ehci_hcd 0000:00:1d.7: debug port 1
[ 0.315934] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[ 0.315969] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xf0a04400
[ 0.335778] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 0.335912] usb usb2: configuration #1 chosen from 1 choice
[ 0.335941] hub 2-0:1.0: USB hub found
[ 0.335950] hub 2-0:1.0: 6 ports detected
[ 0.336021] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.336041] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.336086] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.336095] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[ 0.336099] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[ 0.336139] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
[ 0.336173] uhci_hcd 0000:00:1a.0: irq 16, io base 0x00001820
[ 0.336259] usb usb3: configuration #1 chosen from 1 choice
[ 0.336286] hub 3-0:1.0: USB hub found
[ 0.336292] hub 3-0:1.0: 2 ports detected
[ 0.336336] alloc irq_desc for 21 on node -1
[ 0.336338] alloc kstat_irqs on node -1
[ 0.336344] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[ 0.336350] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[ 0.336353] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[ 0.336386] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
[ 0.336414] uhci_hcd 0000:00:1a.1: irq 21, io base 0x00001840
[ 0.336502] usb usb4: configuration #1 chosen from 1 choice
[ 0.336526] hub 4-0:1.0: USB hub found
[ 0.336532] hub 4-0:1.0: 2 ports detected
[ 0.336574] uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 19 (level, low) -> IRQ 19
[ 0.336579] uhci_hcd 0000:00:1a.2: setting latency timer to 64
[ 0.336583] uhci_hcd 0000:00:1a.2: UHCI Host Controller
[ 0.336610] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
[ 0.336633] uhci_hcd 0000:00:1a.2: irq 19, io base 0x00001860
[ 0.336717] usb usb5: configuration #1 chosen from 1 choice
[ 0.336741] hub 5-0:1.0: USB hub found
[ 0.336748] hub 5-0:1.0: 2 ports detected
[ 0.336791] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 0.336797] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 0.336800] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 0.336832] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
[ 0.336854] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00001880
[ 0.336938] usb usb6: configuration #1 chosen from 1 choice
[ 0.336962] hub 6-0:1.0: USB hub found
[ 0.336970] hub 6-0:1.0: 2 ports detected
[ 0.337011] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 0.337019] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 0.337022] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 0.337050] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
[ 0.337073] uhci_hcd 0000:00:1d.1: irq 19, io base 0x000018a0
[ 0.337155] usb usb7: configuration #1 chosen from 1 choice
[ 0.337179] hub 7-0:1.0: USB hub found
[ 0.337186] hub 7-0:1.0: 2 ports detected
[ 0.337227] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 0.337232] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 0.337235] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 0.337264] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
[ 0.337293] uhci_hcd 0000:00:1d.2: irq 18, io base 0x000018c0
[ 0.337384] usb usb8: configuration #1 chosen from 1 choice
[ 0.337407] hub 8-0:1.0: USB hub found
[ 0.337413] hub 8-0:1.0: 2 ports detected
[ 0.337509] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 0.348688] i8042.c: Detected active multiplexing controller, rev 1.1.
[ 0.351088] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.351102] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[ 0.351105] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[ 0.351108] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[ 0.351110] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[ 0.351225] mice: PS/2 mouse device common for all mice
[ 0.351409] rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0
[ 0.351435] rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[ 0.351546] device-mapper: uevent: version 1.0.3
[ 0.368044] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com
[ 0.387123] Freeing initrd memory: 7712k freed
[ 0.391831] device-mapper: multipath: version 1.1.0 loaded
[ 0.391836] device-mapper: multipath round-robin: version 1.0.0 loaded
[ 0.392021] EISA: Probing bus 0 at eisa.0
[ 0.392028] Cannot allocate resource for EISA slot 1
[ 0.392033] Cannot allocate resource for EISA slot 2
[ 0.392035] Cannot allocate resource for EISA slot 3
[ 0.392037] Cannot allocate resource for EISA slot 4
[ 0.392039] Cannot allocate resource for EISA slot 5
[ 0.392041] Cannot allocate resource for EISA slot 6
[ 0.392049] EISA: Detected 0 cards.
[ 0.392120] cpuidle: using governor ladder
[ 0.392122] cpuidle: using governor menu
[ 0.392548] TCP cubic registered
[ 0.392695] NET: Registered protocol family 10
[ 0.393157] lo: Disabled Privacy Extensions
[ 0.393491] NET: Registered protocol family 17
[ 0.394120] Using IPI No-Shortcut mode
[ 0.394208] PM: Resume from disk failed.
[ 0.394220] registered taskstats version 1
[ 0.394819] Magic number: 15:887:727
[ 0.394833] block loop7: hash matches
[ 0.394899] rtc_cmos 00:07: setting system clock to 2011-02-17 09:42:09 UTC (1297935729)
[ 0.394902] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 0.394903] EDD information not available.
[ 0.428453] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input5
[ 0.638476] ata4: SATA link down (SStatus 0 SControl 300)
[ 0.649336] ata3: SATA link down (SStatus 0 SControl 300)
[ 0.653833] isapnp: No Plug & Play device found
[ 0.747751] usb 2-6: new high speed USB device using ehci_hcd and address 2
[ 0.799787] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 0.799878] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 0.808136] ata2.00: ATAPI: Slimtype DVD A DS8A2S, 6P5D, max UDMA/100
[ 0.810081] ata1.00: ATA-8: SAMSUNG HM251JI, 2SS00_01, max UDMA7
[ 0.810084] ata1.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 0.824071] ata2.00: configured for UDMA/100
[ 0.825983] ata1.00: configured for UDMA/133
[ 0.826097] scsi 0:0:0:0: Direct-Access ATA SAMSUNG HM251JI 2SS0 PQ: 0 ANSI: 5
[ 0.826204] sd 0:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/232 GiB)
[ 0.826237] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 0.826250] sd 0:0:0:0: [sda] Write Protect is off
[ 0.826252] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 0.826276] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 0.826432] sda:
[ 0.829743] scsi 1:0:0:0: CD-ROM Slimtype DVD A DS8A2S 6P5D PQ: 0 ANSI: 5
[ 0.838639] sr0: scsi3-mmc drive: 24x/6x writer dvd-ram cd/rw xa/form2 cdda pop-up
[ 0.838642] Uniform CD-ROM driver Revision: 3.20
[ 0.838724] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 0.838777] sr 1:0:0:0: Attached scsi generic sg1 type 5
[ 0.851388] sda1 sda2 < sda5 > sda3
[ 0.883363] sd 0:0:0:0: [sda] Attached SCSI disk
[ 0.883376] Freeing unused kernel memory: 664k freed
[ 0.883725] Write protecting the kernel text: 4688k
[ 0.883775] Write protecting the kernel read-only data: 1844k
[ 0.900806] udev: starting version 151
[ 0.946585] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 0.946609] r8169 0000:08:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 0.946654] r8169 0000:08:00.0: setting latency timer to 64
[ 0.946703] alloc irq_desc for 29 on node -1
[ 0.946705] alloc kstat_irqs on node -1
[ 0.946720] r8169 0000:08:00.0: irq 29 for MSI/MSI-X
[ 0.947362] eth0: RTL8168c/8111c at 0xf806a000, 00:90:f5:8d:1e:f6, XID 1c4000c0 IRQ 29
[ 1.126267] usb 2-6: configuration #1 chosen from 1 choice
[ 1.322279] kjournald starting. Commit interval 5 seconds
[ 1.322284] EXT3-fs: mounted filesystem with ordered data mode.
[ 1.373016] usb 5-2: new full speed USB device using uhci_hcd and address 2
[ 1.559821] usb 5-2: configuration #1 chosen from 1 choice
[ 32.557805] udev: starting version 151
[ 32.644302] lp: driver loaded but no devices found
[ 32.687769] sdhci: Secure Digital Host Controller Interface driver
[ 32.687772] sdhci: Copyright(c) Pierre Ossman
[ 32.688013] Linux agpgart interface v0.103
[ 32.711366] sdhci-pci 0000:09:00.0: SDHCI controller found [197b:2382] (rev 0)
[ 32.711391] sdhci-pci 0000:09:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 32.711446] sdhci-pci 0000:09:00.0: setting latency timer to 64
[ 32.711489] Registered led device: mmc0::
[ 32.711535] mmc0: SDHCI controller on PCI [0000:09:00.0] using ADMA
[ 32.711549] sdhci-pci 0000:09:00.2: SDHCI controller found [197b:2381] (rev 0)
[ 32.711568] sdhci-pci 0000:09:00.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 32.711575] sdhci-pci 0000:09:00.2: Refusing to bind to secondary interface.
[ 32.711582] sdhci-pci 0000:09:00.2: PCI INT A disabled
[ 32.727988] Adding 5960072k swap on /dev/sda5. Priority:-1 extents:1 across:5960072k
[ 32.854023] cfg80211: Calling CRDA to update world regulatory domain
[ 32.871845] agpgart-intel 0000:00:00.0: Intel Mobile Intel® GM45 Express Chipset
[ 32.872246] agpgart-intel 0000:00:00.0: detected 32764K stolen memory
[ 32.919230] cfg80211: World regulatory domain updated:
[ 32.919234] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 32.919237] (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 32.919239] (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 32.919242] (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 32.919244] (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 32.919246] (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 32.919681] EXT3 FS on sda1, internal journal
[ 32.927700] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000
[ 32.929652] [drm] Initialized drm 1.1.0 20060810
[ 32.942282] Linux video capture interface: v2.00
[ 32.944616] jmb38x_ms 0000:09:00.3: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 32.944625] jmb38x_ms 0000:09:00.3: setting latency timer to 64
[ 32.956151] uvcvideo: Found UVC 1.00 device USB2.0 Camera (0402:5606)
[ 32.971868] usbcore: registered new interface driver hiddev
[ 32.972358] input: USB2.0 Camera as /devices/pci0000:00/0000:00:1d.7/usb2/2-6/2-6:1.0/input/input6
[ 32.972409] usbcore: registered new interface driver uvcvideo
[ 32.972412] USB Video Class driver (v0.1.0)
[ 32.974372] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1a.2/usb5/5-2/5-2:1.0/input/input7
[ 32.974488] generic-usb 0003:046D:C52F.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:1a.2-2/input0
[ 32.986178] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1a.2/usb5/5-2/5-2:1.1/input/input8
[ 32.986337] generic-usb 0003:046D:C52F.0002: input,hiddev96,hidraw1: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:1a.2-2/input1
[ 32.986371] usbcore: registered new interface driver usbhid
[ 32.986374] usbhid: v2.6:USB HID core driver
[ 33.018410] i915 0000:00:02.0: power state changed by ACPI to D0
[ 33.018421] i915 0000:00:02.0: power state changed by ACPI to D0
[ 33.018430] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 33.018434] i915 0000:00:02.0: setting latency timer to 64
[ 33.024306] iwlagn: Intel(R) Wireless WiFi Link AGN driver for Linux, 1.3.27k
[ 33.024309] iwlagn: Copyright(c) 2003-2009 Intel Corporation
[ 33.024384] iwlagn 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 33.024392] iwlagn 0000:02:00.0: setting latency timer to 64
[ 33.024431] iwlagn 0000:02:00.0: Detected Intel Wireless WiFi Link 4965AGN REV=0x4
[ 33.029626] type=1505 audit(1297935762.133:2): operation="profile_load" pid=623 name="/sbin/dhclient3"
[ 33.030315] type=1505 audit(1297935762.133:3): operation="profile_load" pid=623 name="/usr/lib/NetworkManager/nm-dhcp-client.action"
[ 33.030697] type=1505 audit(1297935762.133:4): operation="profile_load" pid=623 name="/usr/lib/connman/scripts/dhclient-script"
[ 33.032351] type=1505 audit(1297935762.137:5): operation="profile_replace" pid=626 name="/sbin/dhclient3"
[ 33.033087] type=1505 audit(1297935762.137:6): operation="profile_replace" pid=626 name="/usr/lib/NetworkManager/nm-dhcp-client.action"
[ 33.033479] type=1505 audit(1297935762.137:7): operation="profile_replace" pid=626 name="/usr/lib/connman/scripts/dhclient-script"
[ 33.073646] alloc irq_desc for 30 on node -1
[ 33.073649] alloc kstat_irqs on node -1
[ 33.073659] i915 0000:00:02.0: irq 30 for MSI/MSI-X
[ 33.073666] [drm] set up 31M of stolen space
[ 33.195021] iwlagn 0000:02:00.0: Tunable channels: 13 802.11bg, 19 802.11a channels
[ 33.195078] alloc irq_desc for 31 on node -1
[ 33.195080] alloc kstat_irqs on node -1
[ 33.195099] iwlagn 0000:02:00.0: irq 31 for MSI/MSI-X
[ 33.202069] phy0: Selected rate control algorithm 'iwl-agn-rs'
[ 33.612718] Synaptics Touchpad, model: 1, fw: 6.2, id: 0x1a0b1, caps: 0xa04711/0x202000
[ 33.649028] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input9
[ 33.882208] fb0: inteldrmfb frame buffer device
[ 33.882211] registered panic notifier
[ 33.906094] acpi device:04: registered as cooling_device2
[ 33.906609] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input10
[ 33.906715] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)
[ 33.906781] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 33.906832] alloc irq_desc for 22 on node -1
[ 33.906834] alloc kstat_irqs on node -1
[ 33.906842] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 33.906886] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 33.914367] vga16fb: initializing
[ 33.914372] vga16fb: mapped to 0xc00a0000
[ 33.914376] vga16fb: not registering due to another framebuffer present
[ 34.040043] type=1505 audit(1297935763.145:8): operation="profile_replace" pid=835 name="/sbin/dhclient3"
[ 34.040731] type=1505 audit(1297935763.145:9): operation="profile_replace" pid=835 name="/usr/lib/NetworkManager/nm-dhcp-client.action"
[ 34.041110] type=1505 audit(1297935763.145:10): operation="profile_replace" pid=835 name="/usr/lib/connman/scripts/dhclient-script"
[ 34.043623] type=1505 audit(1297935763.145:11): operation="profile_load" pid=834 name="/usr/share/gdm/guest-session/Xsession"
[ 34.073232] hda_codec: ALC662 rev1: BIOS auto-probing.
[ 34.074465] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input11
[ 34.124862] Console: switching to colour frame buffer device 160x50
[ 34.131953] iwlagn 0000:02:00.0: firmware: requesting iwlwifi-4965-2.ucode
[ 34.280074] iwlagn 0000:02:00.0: loaded firmware version 228.61.2.24
[ 34.491006] Registered led device: iwl-phy0::radio
[ 34.491026] Registered led device: iwl-phy0::assoc
[ 34.491043] Registered led device: iwl-phy0::RX
[ 34.491060] Registered led device: iwl-phy0::TX
[ 34.532112] apm: BIOS not found.
[ 34.551648] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 34.553447] r8169: eth0: link down
[ 34.553630] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 41.259640] ppdev: user-space parallel port driver
[ 51.462393] wlan0: deauthenticating from 00:21:29:73:37:94 by local choice (reason=3)
[ 51.462507] wlan0: direct probe to AP 00:21:29:73:37:94 (try 1)
[ 51.465384] wlan0: direct probe responded
[ 51.465389] wlan0: authenticate with AP 00:21:29:73:37:94 (try 1)
[ 51.466962] wlan0: authenticated
[ 51.466983] wlan0: associate with AP 00:21:29:73:37:94 (try 1)
[ 51.469732] wlan0: RX AssocResp from 00:21:29:73:37:94 (capab=0x471 status=0 aid=1)
[ 51.469735] wlan0: associated
[ 51.490356] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 61.849006] wlan0: no IPv6 routers present
[ 148.759683] kjournald starting. Commit interval 5 seconds
[ 148.759694] EXT3-fs warning: maximal mount count reached, running e2fsck is recommended
[ 148.760028] EXT3 FS on sda3, internal journal
[ 148.760037] EXT3-fs: mounted filesystem with ordered data mode.
[ 314.584753] iwlagn 0000:02:00.0: Microcode SW error detected. Restarting 0x82000000.
[ 314.811936] Registered led device: iwl-phy0::radio
[ 314.811977] Registered led device: iwl-phy0::assoc
[ 314.812013] Registered led device: iwl-phy0::RX
[ 314.812048] Registered led device: iwl-phy0::TX
[ 1176.620463] uvcvideo: UVC non compliance - GET_MIN/MAX(PROBE) incorrectly supported. Enabling workaround.
[ 1176.724241] uvcvideo: device USB2.0 Camera requested null bandwidth, defaulting to lowest.
[ 7879.939732] uvcvideo: device USB2.0 Camera requested null bandwidth, defaulting to lowest.
[ 8508.670489] usb 2-6: USB disconnect, address 2
[ 8530.504052] usb 2-6: new high speed USB device using ehci_hcd and address 3
[ 8530.882591] usb 2-6: configuration #1 chosen from 1 choice
[ 8530.891633] uvcvideo: Found UVC 1.00 device USB2.0 Camera (0402:5606)
[ 8530.907627] input: USB2.0 Camera as /devices/pci0000:00/0000:00:1d.7/usb2/2-6/2-6:1.0/input/input12
[ 8553.941531] uvcvideo: UVC non compliance - GET_MIN/MAX(PROBE) incorrectly supported. Enabling workaround.
[ 8554.045306] uvcvideo: device USB2.0 Camera requested null bandwidth, defaulting to lowest.
shs@shs-laptop:~$
Merci pour votre help
Dernière modification par loprud (Le 17/02/2011, à 14:10)
Hors ligne
#28 Le 10/07/2011, à 14:40
- gentil_philou
Re : bisoncam ali webcam intégré Grrr !
salut,
sous 8.04 : j'avais trouvé, en fait, que l'image renvoyée était trés sombre ! noir même ! mais apercevable...
j'ai migré vers la 10.04 (et oui, une LTS aussi) et un autre problème est apparu ! mon bouille à l'envers !
seule solution, pour l'instant : configurer dans VLC, le Vflip (horizontal ou vertical) qui remet la tête à l'endroit, pris en compte également dans cheese après la manip sous VLC
mais il doit bien exister une manip automatique pour ce soucis, non ?
puis ensuite pour les autres manip VLC : les réglages ne se conservent pas dès l'arret et le redemarrage pour ça et pour les autres réglages du style de trucs comme l'égaliseur et autres ...
merci d'avance
philou
________________________
Configuration matérielle : MSI VR700 - 1,73 Ghz - 1 Go - 120 Go Ubuntu 10.04. et HP pvillon g6 - 2,6 Ghz - 4 Go - 500 GO
Mes logiciels courants : OOo 3 - BlueFish 2 - The GIMP 2.6 - FireFox 3.0.10
Mon nouveau moteur de recherche préféré : http://www.ethicle.com/fr/
Hors ligne