pb gravure CD-RW ubuntu -dapper beta

dominique · Le 20/04/2006, à 12:07

bonjour

que ce soit sous K3b ,GnomeBaker ,graveman etc je peux graver sans pb en CD-R mais basta pour les CD-RW

le graveur semble graver mais en fait le cd reste vierge

sous K3b j'ai le message gravure réussie (avé la trompette ,siouplé):)

mais si je demande en plus de vérifier les données
là il s'aperçoit que le disque est vide

voici le bug report
_____________________________________________________________________________________________
System
-----------------------
K3b Version: 0.12.93

KDE Version: 3.5.2
QT Version: 3.3.6
Kernel: 2.6.15-20-386
Devices
-----------------------
QSI CDRW/DVD SBW-242 UX08 (/dev/hdc, ) at /media/cdrom0 [CD-R; CD-RW; CD-ROM; DVD-ROM] [DVD-ROM; CD-ROM; CD-R; CD-RW] [SAO; TAO; RAW; SAO/R96P; SAO/R96R; RAW/R16; RAW/R96P; RAW/R96R]

K3b
-----------------------
Size of filesystem calculated: 1217

Used versions
-----------------------
mkisofs: 2.1
cdrecord: 2.1.1a01

cdrecord
-----------------------
/usr/bin/X11/cdrecord: Warning: Running on Linux-2.6.15-20-386
/usr/bin/X11/cdrecord: There are unsettled issues with Linux-2.5 and newer.
/usr/bin/X11/cdrecord: If you have unexpected problems, please try Linux-2.4 or Solaris.
scsidev: '/dev/hdc'
devname: '/dev/hdc'
scsibus: -2 target: -2 lun: -2
Warning: Open by 'devname' is unintentional and not supported.
Linux sg driver version: 3.5.27
Error: Cannot gain SYS_RAWIO capability.Is cdrecord installed SUID root?
: Operation not permitted
/usr/bin/X11/cdrecord: Warning: using inofficial version of libscg (debian-0.8debian2 '@(#)scsitransp.c 1.91 04/06/17 Copyright 1988,1995,2000-2004 J. Schilling').
SCSI buffer size: 64512
Cdrecord-Clone 2.01.01a01 (i686-pc-linux-gnu) Copyright (C) 1995-2004 Joerg Schilling
NOTE: this version of cdrecord is an inofficial (modified) release of cdrecord
and thus may have bugs that are not present in the original version.
Please send bug reports and support requests to <cdrtools@packages.debian.org>.
The original author should not be bothered with problems of this version.
TOC Type: 3 = CD-ROM XA mode 2
Using libscg version 'debian-0.8debian2'.
Driveropts: 'burnfree'
atapi: 1
Device type : Removable CD-ROM
Version : 0
Response Format: 2
Capabilities :
Vendor_info : 'QSI '
Identifikation : 'CDRW/DVD SBW-242'
Revision : 'UX08'
Device seems to be: Generic mmc2 DVD-ROM.
Current: 0x000A
Profile: 0x0010
Profile: 0x0008
Profile: 0x0009
Profile: 0x000A (current)
Using generic SCSI-3/mmc CD-R/CD-RW driver (mmc_cdr).
Driver flags : MMC-3 SWABAUDIO BURNFREE
Supported modes: TAO PACKET SAO SAO/R96P SAO/R96R RAW/R16 RAW/R96P RAW/R96R
Drive buf size : 1959936 = 1914 KB
FIFO size : 41943040 = 40960 KB
Error: Cannot gain SYS_RAWIO capability.Is cdrecord installed SUID root?
: Operation not permitted
Track 01: data 2 MB
Total size: 2 MB (00:16.25) = 1219 sectors
Lout start: 3 MB (00:18/19) = 1219 sectors
Current Secsize: 2048
ATIP info from disk:
Indicated writing power: 6
Reference speed: 2
Is not unrestricted
Is erasable
ATIP start of lead in: -11078 (97:34/22)
ATIP start of lead out: 359849 (79:59/74)
1T speed low: 0 (reserved val 0) 1T speed high: 4
2T speed low: 0 (reserved val 5) 2T speed high: 0 (reserved val 12)
power mult factor: 3 5
recommended erase/write power: 3
A1 values: 02 3A B0
A2 values: 5C C6 26
Disk type: Phase change
Manuf. index: 11
Manufacturer: Mitsubishi Chemical Corporation
Blocks total: 359849 Blocks current: 359849 Blocks remaining: 358630
Starting to write CD/DVD at speed 4 in real TAO mode for multi session.
Last chance to quit, starting real write in 2 seconds.
1 seconds.
0 seconds. Operation starts.
Waiting for reader process to fill input buffer ... input buffer ready.
BURN-Free is OFF.
Turning BURN-Free on
Performing OPC...
Starting new track at sector: 0
Track 01: 0 of 2 MB written.
Track 01: 1 of 2 MB written (fifo 100%) [buf 75%] 159.5x.
Track 01: 2 of 2 MB written (fifo 100%) [buf 100%] 1.9x.
Track 01: Total bytes read/written: 2492416/2492416 (1217 sectors).
Writing time: 17.335s
Average write speed 1.6x.
Min drive buffer fill was 100%
Fixating...
Fixating time: 89.520s
BURN-Free was never needed.
/usr/bin/X11/cdrecord: fifo had 40 puts and 40 gets.
/usr/bin/X11/cdrecord: fifo was 0 times empty and 0 times full, min fill was 100%.

cdrecord command:
-----------------------
/usr/bin/X11/cdrecord.mmap -v gracetime=2 dev=/dev/hdc speed=24 -tao driveropts=burnfree -eject fs=40m -overburn -multi -xa -tsize=1217s -

mkisofs
-----------------------
1217
41.99% done, estimate finish Thu Apr 20 11:57:56 2006
82.74% done, estimate finish Thu Apr 20 11:57:51 2006
Total translation table size: 0
Total rockridge attributes bytes: 282
Total directory bytes: 0
Path table size(bytes): 10
Max brk space used 0
1217 extents written (2 MB)

mkisofs command:
-----------------------
/opt/schily/bin/mkisofs -gui -graft-points -volid GEORGETTE PLANA - La fille du be -volset -appid K3B THE CD KREATOR (C) 1998-2005 SEBASTIAN TRUEG AND THE K3B TEAM -publisher -preparer -sysid LINUX -volset-size 1 -volset-seqno 1 -sort /tmp/kde-dominique/k3bMsORab.tmp -rational-rock -hide-list /tmp/kde-dominique/k3bc3Wxtc.tmp -joliet -hide-joliet-list /tmp/kde-dominique/k3bu5nn1a.tmp -full-iso9660-filenames -iso-level 2 -path-list /tmp/kde-dominique/k3bJLF9ia.tmp

help

merci d'avance

dominique

trasmontano · Le 20/04/2006, à 12:10

installe les packages cdrecord cdrdao et dvd+rw-tools

D'ailleurs je suis sur dapper également et je n'ai pas la même version de cdrecord

Dernière modification par trasmontano (Le 20/04/2006, à 12:13)

dominique · Le 20/04/2006, à 12:13

déjà vérifié t'as une autre piste

dominique · Le 20/04/2006, à 12:15

tu peux me donner les versions de cdrecord cdrdao et dw +rw-tools que tu utilises

cep_ · Le 20/04/2006, à 12:19

Vendor_info : 'QSI '
Identifikation : 'CDRW/DVD SBW-242'

Regarde ce poste : http://forum.ubuntu-fr.org/viewtopic.php?pid=268487#p268487

dominique · Le 20/04/2006, à 12:24

ok

je suis en train de tester avec les versions originelles de dapper

dominique · Le 20/04/2006, à 12:27

même pb

si je ne touve pas j'attendrai pour refaire de CD-RW

merci de ton aide

à tout hasard voici le bug report

System
-----------------------
K3b Version: 0.12.93

KDE Version: 3.5.2
QT Version: 3.3.6
Kernel: 2.6.15-20-386
Devices
-----------------------
QSI CDRW/DVD SBW-242 UX08 (/dev/hdc, ) at /media/cdrom0 [CD-R; CD-RW; CD-ROM; DVD-ROM] [DVD-ROM; CD-ROM; CD-R; CD-RW] [SAO; TAO; RAW; SAO/R96P; SAO/R96R; RAW/R16; RAW/R96P; RAW/R96R]

K3b
-----------------------
Size of filesystem calculated: 1217

Used versions
-----------------------
mkisofs: 2.1
cdrecord: 2.1.1a01

cdrecord
-----------------------
/usr/bin/X11/cdrecord: Warning: Running on Linux-2.6.15-20-386
/usr/bin/X11/cdrecord: There are unsettled issues with Linux-2.5 and newer.
/usr/bin/X11/cdrecord: If you have unexpected problems, please try Linux-2.4 or Solaris.
scsidev: '/dev/hdc'
devname: '/dev/hdc'
scsibus: -2 target: -2 lun: -2
Warning: Open by 'devname' is unintentional and not supported.
Linux sg driver version: 3.5.27
Error: Cannot gain SYS_RAWIO capability.Is cdrecord installed SUID root?
: Operation not permitted
/usr/bin/X11/cdrecord: Warning: using inofficial version of libscg (debian-0.8debian2 '@(#)scsitransp.c 1.91 04/06/17 Copyright 1988,1995,2000-2004 J. Schilling').
SCSI buffer size: 64512
Cdrecord-Clone 2.01.01a01 (i686-pc-linux-gnu) Copyright (C) 1995-2004 Joerg Schilling
NOTE: this version of cdrecord is an inofficial (modified) release of cdrecord
and thus may have bugs that are not present in the original version.
Please send bug reports and support requests to <cdrtools@packages.debian.org>.
The original author should not be bothered with problems of this version.
TOC Type: 3 = CD-ROM XA mode 2
Using libscg version 'debian-0.8debian2'.
Driveropts: 'burnfree'
atapi: 1
Device type : Removable CD-ROM
Version : 0
Response Format: 2
Capabilities :
Vendor_info : 'QSI '
Identifikation : 'CDRW/DVD SBW-242'
Revision : 'UX08'
Device seems to be: Generic mmc2 DVD-ROM.
Current: 0x000A
Profile: 0x0010
Profile: 0x0008
Profile: 0x0009
Profile: 0x000A (current)
Using generic SCSI-3/mmc CD-R/CD-RW driver (mmc_cdr).
Driver flags : MMC-3 SWABAUDIO BURNFREE
Supported modes: TAO PACKET SAO SAO/R96P SAO/R96R RAW/R16 RAW/R96P RAW/R96R
Drive buf size : 1959936 = 1914 KB
FIFO size : 41943040 = 40960 KB
Error: Cannot gain SYS_RAWIO capability.Is cdrecord installed SUID root?
: Operation not permitted
Track 01: data 2 MB
Total size: 2 MB (00:16.25) = 1219 sectors
Lout start: 3 MB (00:18/19) = 1219 sectors
Current Secsize: 2048
ATIP info from disk:
Indicated writing power: 6
Reference speed: 2
Is not unrestricted
Is erasable
ATIP start of lead in: -11078 (97:34/22)
ATIP start of lead out: 359849 (79:59/74)
1T speed low: 0 (reserved val 0) 1T speed high: 4
2T speed low: 0 (reserved val 5) 2T speed high: 0 (reserved val 12)
power mult factor: 3 5
recommended erase/write power: 3
A1 values: 02 3A B0
A2 values: 5C C6 26
Disk type: Phase change
Manuf. index: 11
Manufacturer: Mitsubishi Chemical Corporation
Blocks total: 359849 Blocks current: 359849 Blocks remaining: 358630
Starting to write CD/DVD at speed 4 in real TAO mode for multi session.
Last chance to quit, starting real write in 2 seconds.
1 seconds.
0 seconds. Operation starts.
Waiting for reader process to fill input buffer ... input buffer ready.
BURN-Free is OFF.
Turning BURN-Free on
Performing OPC...
Starting new track at sector: 0
Track 01: 0 of 2 MB written.
Track 01: 1 of 2 MB written (fifo 100%) [buf 75%] 128.7x.
Track 01: 2 of 2 MB written (fifo 100%) [buf 100%] 1.9x.
Track 01: Total bytes read/written: 2492416/2492416 (1217 sectors).
Writing time: 17.464s
Average write speed 1.6x.
Min drive buffer fill was 100%
Fixating...
Fixating time: 96.396s
BURN-Free was never needed.
/usr/bin/X11/cdrecord: fifo had 40 puts and 40 gets.
/usr/bin/X11/cdrecord: fifo was 0 times empty and 0 times full, min fill was 100%.

cdrecord command:
-----------------------
/usr/bin/X11/cdrecord.mmap -v gracetime=2 dev=/dev/hdc speed=24 -tao driveropts=burnfree -eject fs=40m -overburn -multi -xa -tsize=1217s -

mkisofs
-----------------------
1217
41.99% done, estimate finish Thu Apr 20 12:22:07 2006
82.74% done, estimate finish Thu Apr 20 12:22:06 2006
Total translation table size: 0
Total rockridge attributes bytes: 282
Total directory bytes: 0
Path table size(bytes): 10
Max brk space used 0
1217 extents written (2 MB)

mkisofs command:
-----------------------
/opt/schily/bin/mkisofs -gui -graft-points -volid GEORGETTE -volset -appid K3B THE CD KREATOR (C) 1998-2005 SEBASTIAN TRUEG AND THE K3B TEAM -publisher -preparer -sysid LINUX -volset-size 1 -volset-seqno 1 -sort /tmp/kde-dominique/k3bOETvjb.tmp -rational-rock -hide-list /tmp/kde-dominique/k3bWiAAsc.tmp -joliet -hide-joliet-list /tmp/kde-dominique/k3bD2hCub.tmp -full-iso9660-filenames -iso-level 2 -path-list /tmp/kde-dominique/k3b2aVwwb.tmp

cep_ · Le 20/04/2006, à 12:50

Problème de droits et d'iso ?

dominique · Le 20/04/2006, à 12:54

j'y ai pensé mais pourquoi ça fonctionne pour les cd-R

trasmontano · Le 20/04/2006, à 13:44

Alors je vois pas.

tras@xinretla:~$ apt-cache show cdrecord cdrdao dvd+rw-tools | grep Version
Version: 4:2.01+01a01-4ubuntu6
Version: 1:1.2.1-2ubuntu1
Version: 5.21.4.10.8-4ubuntu1

As tu essayé de formater ton cdrw au préalable avec k3b par exemple?

Dernière modification par trasmontano (Le 20/04/2006, à 13:47)

dominique · Le 21/04/2006, à 10:49

bonjour à tous

j'ai une solution qui vaut ce qu'elle vaut mais ça fonctionne

créez un lanceur personnalisé pour pouvoir lancer K3b en root

avec dans le champ commande

gksudo /usr/bin/k3b

ou ouvrir une console
taper
sudo -s
entrer votre password

puis k3b

voilà voilà;)

Ubuntu-fr

Navigation

Liens de recherche

Annonce

#1 Le 20/04/2006, à 12:07

pb gravure CD-RW ubuntu -dapper beta

#2 Le 20/04/2006, à 12:10

Re : pb gravure CD-RW ubuntu -dapper beta

#3 Le 20/04/2006, à 12:13

Re : pb gravure CD-RW ubuntu -dapper beta

#4 Le 20/04/2006, à 12:15

Re : pb gravure CD-RW ubuntu -dapper beta

#5 Le 20/04/2006, à 12:19

Re : pb gravure CD-RW ubuntu -dapper beta

#6 Le 20/04/2006, à 12:24

Re : pb gravure CD-RW ubuntu -dapper beta

#7 Le 20/04/2006, à 12:27

Re : pb gravure CD-RW ubuntu -dapper beta

#8 Le 20/04/2006, à 12:50

Re : pb gravure CD-RW ubuntu -dapper beta

#9 Le 20/04/2006, à 12:54

Re : pb gravure CD-RW ubuntu -dapper beta

#10 Le 20/04/2006, à 13:44

Re : pb gravure CD-RW ubuntu -dapper beta

#11 Le 21/04/2006, à 10:49

Re : pb gravure CD-RW ubuntu -dapper beta

Pied de page des forums