Problèmes suite à une MàJ

Lilymage · Le 13/03/2010, à 17:47

Bonjour!
Je suis sous ubuntu 9.10 et, après une mise à jour la semaine dernière, j'ai plusieurs problème: mon ordi est très lent à démarrer et finit par m'afficher plusieurs messages d'erreurs avant de réussir (miraculeusement) à se lancer (à vrai dire, je pense que c'est de la que viennent mais autres problèmes...); j'ai perdu mon touchpad (j'ai un ordi portable Dell inspiron 1200) alors que je n'avais aucun problème avant; l'icône de connexion dans le tableau de bord supérieur a disparu, remplacé par un icône de volume inutilisable (je suppose qu'on s'en fiche mais bon x') ).
Internet est aussi très lent, mais je pense que c'est plutôt lié à la mise à jour précédente.
C'est la deuxième fois que j'ai des problèmes avec les mises à jour en à peine un mois
Voilà, si quelqu'un à un remède, je l'en remercie d'avance

Dernière modification par Lilymage (Le 13/03/2010, à 17:51)

kyncani · Le 13/03/2010, à 18:22

Poste voir le résultat des commandes dmesg et sudo find /etc/apt -type f ainsi que le contenu de /etc/apt/sources.list et /var/log/messages

Lilymage · Le 13/03/2010, à 19:34

Voilà ce que j'ai pour dmesg mais je crois qu'en fait, c'est tellement long que le terminal n'affiche pas tout (il doit manquer les premières lignes...)

[    1.534447] agpgart-intel 0000:00:00.0: detected 7932K stolen memory
[    1.537895] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xc0000000
[    1.626296] [drm] Initialized drm 1.1.0 20060810
[    1.647110] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    1.647148] i915 0000:00:02.0: setting latency timer to 64
[    1.761173] e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI
[    1.761178] e100: Copyright(c) 1999-2006 Intel Corporation
[    1.761241]   alloc irq_desc for 20 on node -1
[    1.761244]   alloc kstat_irqs on node -1
[    1.761254] e100 0000:02:08.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[    1.788805] e100 0000:02:08.0: PME# disabled
[    1.788916] usb 2-1: configuration #1 chosen from 1 choice
[    1.791836] e100: eth0: e100_probe: addr 0xdfdff000, irq 20, MAC addr 00:12:3f:f5:17:2e
[    1.801646] usbcore: registered new interface driver hiddev
[    1.802525] integrated sync not supported
[    2.294556] [drm] DAC-6: set mode 640x480 0
[    2.295674] input: PS/2+USB Mouse as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1:1.0/input/input7
[    2.295786] generic-usb 0003:04F3:0210.0001: input,hidraw0: USB HID v1.11 Mouse [PS/2+USB Mouse] on usb-0000:00:1d.0-1/input0
[    2.295809] usbcore: registered new interface driver usbhid
[    2.295813] usbhid: v2.6:USB HID core driver
[    2.481706] integrated sync not supported
[    2.522384] [drm] TV-14: set mode NTSC 480i 0
[    2.660615] [drm] fb0: inteldrmfb frame buffer device
[    2.660629] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[    2.725397] render error detected, EIR: 0x00000010
[    2.725401] page table error
[    2.725403]   PGTBL_ER: 0x00000100
[    2.725408] [drm:i915_handle_error] *ERROR* EIR stuck: 0x00000010, masking
[    2.725417] render error detected, EIR: 0x00000010
[    2.725419] page table error
[    2.725421]   PGTBL_ER: 0x00000100
[    2.737589] [drm] LVDS-8: set mode 1024x768 17
[    3.165884] Console: switching to colour frame buffer device 128x48
[    3.424980] PM: Starting manual resume from disk
[    3.424986] PM: Resume from partition 8:5
[    3.424989] PM: Checking hibernation image.
[    3.425180] PM: Resume from disk failed.
[    3.481464] kjournald starting.  Commit interval 5 seconds
[    3.481479] EXT3-fs: mounted filesystem with writeback data mode.
[    5.117500] type=1505 audit(1268478220.650:2): operation="profile_load" pid=368 name=/usr/share/gdm/guest-session/Xsession
[    5.146860] type=1505 audit(1268478220.677:3): operation="profile_load" pid=369 name=/sbin/dhclient3
[    5.147768] type=1505 audit(1268478220.677:4): operation="profile_load" pid=369 name=/usr/lib/NetworkManager/nm-dhcp-client.action
[    5.148288] type=1505 audit(1268478220.681:5): operation="profile_load" pid=369 name=/usr/lib/connman/scripts/dhclient-script
[    5.223932] type=1505 audit(1268478220.755:6): operation="profile_load" pid=370 name=/usr/bin/evince
[    5.238963] type=1505 audit(1268478220.769:7): operation="profile_load" pid=370 name=/usr/bin/evince-previewer
[    5.247745] type=1505 audit(1268478220.777:8): operation="profile_load" pid=370 name=/usr/bin/evince-thumbnailer
[    5.312218] type=1505 audit(1268478220.845:9): operation="profile_load" pid=372 name=/usr/lib/cups/backend/cups-pdf
[    5.313285] type=1505 audit(1268478220.845:10): operation="profile_load" pid=372 name=/usr/sbin/cupsd
[   33.752088] usb 1-3: new high speed USB device using ehci_hcd and address 3
[   33.885593] usb 1-3: configuration #1 chosen from 2 choices
[   34.536226] udev: starting version 147
[   34.577327] Adding 706820k swap on /dev/sda5.  Priority:-1 extents:1 across:706820k 
[   34.666396] lp: driver loaded but no devices found
[   34.668903] Disabling lock debugging due to kernel taint
[   34.679415] intel_rng: FWH not detected
[   34.825987] ndiswrapper version 1.55 loaded (smp=yes, preempt=no)
[   34.897223] EXT3 FS on sda1, internal journal
[   34.980869] usbcore: registered new interface driver ndiswrapper
[   35.166932] Initializing USB Mass Storage driver...
[   35.167090] scsi2 : SCSI emulation for USB Mass Storage devices
[   35.167230] usbcore: registered new interface driver usb-storage
[   35.167234] USB Mass Storage support registered.
[   35.180075] usb-storage: device found at 3
[   35.180080] usb-storage: waiting for device to settle before scanning
[   35.191824] yenta_cardbus 0000:02:01.0: CardBus bridge found [1028:01a6]
[   35.191852] yenta_cardbus 0000:02:01.0: Using CSCINT to route CSC interrupts to PCI
[   35.191856] yenta_cardbus 0000:02:01.0: Routing CardBus interrupts to PCI
[   35.191864] yenta_cardbus 0000:02:01.0: TI: mfunc 0x00001002, devctl 0x64
[   35.420788] yenta_cardbus 0000:02:01.0: ISA IRQ mask 0x0cf8, PCI irq 16
[   35.420796] yenta_cardbus 0000:02:01.0: Socket status: 30000007
[   35.420802] pci_bus 0000:02: Raising subordinate bus# of parent bus (#02) from #03 to #06
[   35.420815] yenta_cardbus 0000:02:01.0: pcmcia: parent PCI bridge I/O window: 0xd000 - 0xdfff
[   35.420821] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xd000-0xdfff: clean.
[   35.421467] yenta_cardbus 0000:02:01.0: pcmcia: parent PCI bridge Memory window: 0xdfd00000 - 0xdfdfffff
[   35.421472] yenta_cardbus 0000:02:01.0: pcmcia: parent PCI bridge Memory window: 0x50000000 - 0x53ffffff
[   39.170572] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[   39.170579] ata1.00: BMDMA stat 0x65
[   39.170591] ata1.00: cmd c8/00:50:97:01:e6/00:00:00:00:00/e0 tag 0 dma 40960 in
[   39.170593]          res 51/40:4a:9d:01:e6/00:00:00:00:00/e0 Emask 0x9 (media error)
[   39.170598] ata1.00: status: { DRDY ERR }
[   39.170601] ata1.00: error: { UNC }
[   39.192945] ata1.00: configured for UDMA/100
[   39.208418] ata1.01: configured for UDMA/33
[   39.208431] ata1: EH complete
[   40.180265] usb-storage: device scan complete
[   40.195886] scsi 2:0:0:0: Direct-Access     Apple    iPod             1.62 PQ: 0 ANSI: 0
[   40.196488] sd 2:0:0:0: Attached scsi generic sg2 type 0
[   40.200988] sd 2:0:0:0: [sdb] 1941441 4096-byte logical blocks: (7.95 GB/7.40 GiB)
[   40.201596] sd 2:0:0:0: [sdb] Write Protect is off
[   40.201601] sd 2:0:0:0: [sdb] Mode Sense: 68 00 00 08
[   40.201605] sd 2:0:0:0: [sdb] Assuming drive cache: write through
[   40.203725] sd 2:0:0:0: [sdb] 1941441 4096-byte logical blocks: (7.95 GB/7.40 GiB)
[   40.204217] sd 2:0:0:0: [sdb] Assuming drive cache: write through
[   40.204224]  sdb: sdb1
[   40.210812] sd 2:0:0:0: [sdb] 1941441 4096-byte logical blocks: (7.95 GB/7.40 GiB)
[   40.212241] sd 2:0:0:0: [sdb] Assuming drive cache: write through
[   40.212250] sd 2:0:0:0: [sdb] Attached SCSI removable disk
[   43.139162] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[   43.139169] ata1.00: BMDMA stat 0x65
[   43.139181] ata1.00: cmd c8/00:50:97:01:e6/00:00:00:00:00/e0 tag 0 dma 40960 in
[   43.139183]          res 51/40:4a:9d:01:e6/00:00:00:00:00/e0 Emask 0x9 (media error)
[   43.139188] ata1.00: status: { DRDY ERR }
[   43.139191] ata1.00: error: { UNC }
[   43.160919] ata1.00: configured for UDMA/100
[   43.176420] ata1.01: configured for UDMA/33
[   43.176434] ata1: EH complete
[   47.118772] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[   47.118777] ata1.00: BMDMA stat 0x65
[   47.118787] ata1.00: cmd c8/00:50:97:01:e6/00:00:00:00:00/e0 tag 0 dma 40960 in
[   47.118789]          res 51/40:4a:9d:01:e6/00:00:00:00:00/e0 Emask 0x9 (media error)
[   47.118793] ata1.00: status: { DRDY ERR }
[   47.118796] ata1.00: error: { UNC }
[   47.140917] ata1.00: configured for UDMA/100
[   47.156422] ata1.01: configured for UDMA/33
[   47.156431] ata1: EH complete
[   51.109450] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[   51.109455] ata1.00: BMDMA stat 0x65
[   51.109465] ata1.00: cmd c8/00:50:97:01:e6/00:00:00:00:00/e0 tag 0 dma 40960 in
[   51.109467]          res 51/40:4a:9d:01:e6/00:00:00:00:00/e0 Emask 0x9 (media error)
[   51.109472] ata1.00: status: { DRDY ERR }
[   51.109475] ata1.00: error: { UNC }
[   51.132943] ata1.00: configured for UDMA/100
[   51.148422] ata1.01: configured for UDMA/33
[   51.148430] ata1: EH complete
[   55.100123] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[   55.100128] ata1.00: BMDMA stat 0x65
[   55.100138] ata1.00: cmd c8/00:50:97:01:e6/00:00:00:00:00/e0 tag 0 dma 40960 in
[   55.100140]          res 51/40:4a:9d:01:e6/00:00:00:00:00/e0 Emask 0x9 (media error)
[   55.100144] ata1.00: status: { DRDY ERR }
[   55.100148] ata1.00: error: { UNC }
[   55.124920] ata1.00: configured for UDMA/100
[   55.140422] ata1.01: configured for UDMA/33
[   55.140431] ata1: EH complete
[   59.123950] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[   59.123955] ata1.00: BMDMA stat 0x65
[   59.123965] ata1.00: cmd c8/00:50:97:01:e6/00:00:00:00:00/e0 tag 0 dma 40960 in
[   59.123967]          res 51/40:4a:9d:01:e6/00:00:00:00:00/e0 Emask 0x9 (media error)
[   59.123971] ata1.00: status: { DRDY ERR }
[   59.123975] ata1.00: error: { UNC }
[   59.148917] ata1.00: configured for UDMA/100
[   59.164424] ata1.01: configured for UDMA/33
[   59.164441] sd 0:0:0:0: [sda] Unhandled sense code
[   59.164445] sd 0:0:0:0: [sda] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[   59.164450] sd 0:0:0:0: [sda] Sense Key : Medium Error [current] [descriptor]
[   59.164456] Descriptor sense data with sense descriptors (in hex):
[   59.164460]         72 03 11 04 00 00 00 0c 00 0a 80 00 00 00 00 00 
[   59.164473]         00 e6 01 9d 
[   59.164479] sd 0:0:0:0: [sda] Add. Sense: Unrecovered read error - auto reallocate failed
[   59.164488] end_request: I/O error, dev sda, sector 15073693
[   59.164508] ata1: EH complete
[   63.346782] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[   63.346789] ata1.00: BMDMA stat 0x65
[   63.346801] ata1.00: cmd c8/00:08:97:01:e6/00:00:00:00:00/e0 tag 0 dma 4096 in
[   63.346803]          res 51/40:02:9d:01:e6/00:00:00:00:00/e0 Emask 0x9 (media error)
[   63.346808] ata1.00: status: { DRDY ERR }
[   63.346812] ata1.00: error: { UNC }
[   63.368946] ata1.00: configured for UDMA/100
[   63.384420] ata1.01: configured for UDMA/33
[   63.384435] ata1: EH complete
[   67.304247] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[   67.304252] ata1.00: BMDMA stat 0x65
[   67.304262] ata1.00: cmd c8/00:08:97:01:e6/00:00:00:00:00/e0 tag 0 dma 4096 in
[   67.304264]          res 51/40:02:9d:01:e6/00:00:00:00:00/e0 Emask 0x9 (media error)
[   67.304269] ata1.00: status: { DRDY ERR }
[   67.304272] ata1.00: error: { UNC }
[   67.329053] ata1.00: configured for UDMA/100
[   67.344418] ata1.01: configured for UDMA/33
[   67.344427] ata1: EH complete
[   71.294891] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[   71.294896] ata1.00: BMDMA stat 0x65
[   71.294906] ata1.00: cmd c8/00:08:97:01:e6/00:00:00:00:00/e0 tag 0 dma 4096 in
[   71.294908]          res 51/40:02:9d:01:e6/00:00:00:00:00/e0 Emask 0x9 (media error)
[   71.294912] ata1.00: status: { DRDY ERR }
[   71.294916] ata1.00: error: { UNC }
[   71.316919] ata1.00: configured for UDMA/100
[   71.332417] ata1.01: configured for UDMA/33
[   71.332425] ata1: EH complete
[   75.252367] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[   75.252371] ata1.00: BMDMA stat 0x65
[   75.252381] ata1.00: cmd c8/00:08:97:01:e6/00:00:00:00:00/e0 tag 0 dma 4096 in
[   75.252383]          res 51/40:02:9d:01:e6/00:00:00:00:00/e0 Emask 0x9 (media error)
[   75.252388] ata1.00: status: { DRDY ERR }
[   75.252391] ata1.00: error: { UNC }
[   75.276949] ata1.00: configured for UDMA/100
[   75.292418] ata1.01: configured for UDMA/33
[   75.292427] ata1: EH complete
[   79.243000] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[   79.243005] ata1.00: BMDMA stat 0x65
[   79.243015] ata1.00: cmd c8/00:08:97:01:e6/00:00:00:00:00/e0 tag 0 dma 4096 in
[   79.243017]          res 51/40:02:9d:01:e6/00:00:00:00:00/e0 Emask 0x9 (media error)
[   79.243021] ata1.00: status: { DRDY ERR }
[   79.243025] ata1.00: error: { UNC }
[   79.264929] ata1.00: configured for UDMA/100
[   79.280422] ata1.01: configured for UDMA/33
[   79.280431] ata1: EH complete
[   83.233625] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[   83.233630] ata1.00: BMDMA stat 0x65
[   83.233640] ata1.00: cmd c8/00:08:97:01:e6/00:00:00:00:00/e0 tag 0 dma 4096 in
[   83.233642]          res 51/40:02:9d:01:e6/00:00:00:00:00/e0 Emask 0x9 (media error)
[   83.233647] ata1.00: status: { DRDY ERR }
[   83.233650] ata1.00: error: { UNC }
[   83.256936] ata1.00: configured for UDMA/100
[   83.272422] ata1.01: configured for UDMA/33
[   83.272439] sd 0:0:0:0: [sda] Unhandled sense code
[   83.272443] sd 0:0:0:0: [sda] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[   83.272448] sd 0:0:0:0: [sda] Sense Key : Medium Error [current] [descriptor]
[   83.272455] Descriptor sense data with sense descriptors (in hex):
[   83.272458]         72 03 11 04 00 00 00 0c 00 0a 80 00 00 00 00 00 
[   83.272472]         00 e6 01 9d 
[   83.272477] sd 0:0:0:0: [sda] Add. Sense: Unrecovered read error - auto reallocate failed
[   83.272486] end_request: I/O error, dev sda, sector 15073693
[   83.272505] ata1: EH complete
[   83.275275] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
[   83.350790] __ratelimit: 3 callbacks suppressed
[   83.350796] type=1505 audit(1268478298.881:12): operation="profile_replace" pid=773 name=/usr/share/gdm/guest-session/Xsession
[   83.353280] type=1505 audit(1268478298.885:13): operation="profile_replace" pid=774 name=/sbin/dhclient3
[   83.354185] type=1505 audit(1268478298.885:14): operation="profile_replace" pid=774 name=/usr/lib/NetworkManager/nm-dhcp-client.action
[   83.354678] type=1505 audit(1268478298.885:15): operation="profile_replace" pid=774 name=/usr/lib/connman/scripts/dhclient-script
[   83.361530] ip_tables: (C) 2000-2006 Netfilter Core Team
[   83.400195] dell-wmi: No known WMI GUID found
[   83.419138] type=1505 audit(1268478298.949:16): operation="profile_replace" pid=775 name=/usr/bin/evince
[   83.463903] type=1505 audit(1268478298.993:17): operation="profile_replace" pid=775 name=/usr/bin/evince-previewer
[   83.547967] type=1505 audit(1268478299.077:18): operation="profile_replace" pid=775 name=/usr/bin/evince-thumbnailer
[   83.570107] ADDRCONF(NETDEV_UP): eth0: link is not ready
[   83.589387] type=1505 audit(1268478299.121:19): operation="profile_replace" pid=867 name=/usr/lib/cups/backend/cups-pdf
[   83.614559] Intel ICH 0000:00:1e.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[   83.614608] Intel ICH 0000:00:1e.2: setting latency timer to 64
[   83.628659] type=1505 audit(1268478299.161:20): operation="profile_replace" pid=867 name=/usr/sbin/cupsd
[   83.632221] type=1505 audit(1268478299.165:21): operation="profile_replace" pid=873 name=/usr/sbin/tcpdump
[   83.731978] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x100-0x3af: clean.
[   83.733742] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x3e0-0x4ff: clean.
[   83.734486] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x820-0x8ff: clean.
[   83.735107] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xc00-0xcf7: clean.
[   83.735928] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xa00-0xaff: clean.
[   84.440042] intel8x0_measure_ac97_clock: measured 55393 usecs (2669 samples)
[   84.440048] intel8x0: clocking to 48000
[   84.958332] FAT: Filesystem error (dev sdb1)
[   84.958339]     fat_free_clusters: deleting FAT entry beyond EOF
[   84.958344]     File system has been set read-only
[   85.018674] [drm] DAC-6: set mode 640x480 0
[   85.131595] [drm] DAC-6: set mode 640x480 0
[   85.423714] integrated sync not supported
[   85.464561] [drm] TV-14: set mode NTSC 480i 0
[   85.607388] [drm] TV-14: set mode NTSC 480i 0
[   85.639266] ppdev: user-space parallel port driver
[   85.783263] [drm] DAC-6: set mode 640x480 0
[   85.890009] [drm] DAC-6: set mode 640x480 0
[   86.056924] integrated sync not supported
[   86.100445] [drm] TV-14: set mode NTSC 480i 0
[   86.378637] [drm] TV-14: set mode NTSC 480i 0
[   90.040018] [drm] DAC-6: set mode 640x480 0
[   90.160139] [drm] DAC-6: set mode 640x480 0
[   90.323375] integrated sync not supported
[   90.365569] [drm] TV-14: set mode NTSC 480i 0
[   90.509945] [drm] TV-14: set mode NTSC 480i 0
[   90.669904] [drm] DAC-6: set mode 640x480 0
[   90.779442] [drm] DAC-6: set mode 640x480 0
[   90.945680] integrated sync not supported
[   90.987853] [drm] TV-14: set mode NTSC 480i 0
[   91.130793] [drm] TV-14: set mode NTSC 480i 0
[   91.282641] [drm] DAC-6: set mode 640x480 0
[   91.400222] [drm] DAC-6: set mode 640x480 0
[   91.567274] integrated sync not supported
[   91.609568] [drm] TV-14: set mode NTSC 480i 0
[   91.752928] [drm] TV-14: set mode NTSC 480i 0
[   93.376600] [drm] DAC-6: set mode 640x480 0
[   93.504045] [drm] DAC-6: set mode 640x480 0
[   93.674417] integrated sync not supported
[   93.716628] [drm] TV-14: set mode NTSC 480i 0
[   93.857507] [drm] TV-14: set mode NTSC 480i 0
[  186.061377] FAT: Filesystem error (dev sdb1)
[  186.061386]     fat_get_cluster: invalid cluster chain (i_pos 489487)
[  186.061392]     File system has been set read-only
[  186.061422] FAT: Filesystem error (dev sdb1)
[  186.061425]     fat_get_cluster: invalid cluster chain (i_pos 489487)
[  186.061440] FAT: Filesystem error (dev sdb1)
[  186.061442]     fat_get_cluster: invalid cluster chain (i_pos 489487)
[  186.061448] FAT: Filesystem error (dev sdb1)
[  186.061450]     fat_get_cluster: invalid cluster chain (i_pos 489487)
[  186.076241] FAT: Filesystem error (dev sdb1)
[  186.076250]     fat_get_cluster: invalid cluster chain (i_pos 489487)
[  186.076271] FAT: Filesystem error (dev sdb1)
[  186.076274]     fat_get_cluster: invalid cluster chain (i_pos 489487)
[  186.076759] FAT: Filesystem error (dev sdb1)
[  186.076762]     fat_get_cluster: invalid cluster chain (i_pos 489487)
[  186.076779] FAT: Filesystem error (dev sdb1)
[  186.076782]     fat_get_cluster: invalid cluster chain (i_pos 489487)
[  205.816201] e100: eth0 NIC Link is Up 100 Mbps Full Duplex
[  205.816554] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[  216.388033] eth0: no IPv6 routers present
[  529.297060] FAT: Filesystem error (dev sdb1)
[  529.297069]     fat_get_cluster: invalid cluster chain (i_pos 489487)
[  529.297080] FAT: Filesystem error (dev sdb1)
[  529.297082]     fat_get_cluster: invalid cluster chain (i_pos 489487)
[  529.297536] FAT: Filesystem error (dev sdb1)
[  529.297539]     fat_get_cluster: invalid cluster chain (i_pos 489487)
[  529.297558] FAT: Filesystem error (dev sdb1)
[  529.297560]     fat_get_cluster: invalid cluster chain (i_pos 489487)
[ 1807.928929] ata1.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 1807.928949] ata1.01: cmd a0/00:00:00:08:00/00:00:00:00:00/b0 tag 0 pio 16392 in
[ 1807.928952]          cdb 25 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00
[ 1807.928953]          res 51/20:03:00:00:00/00:00:00:00:00/b0 Emask 0x1 (device error)
[ 1807.928959] ata1.01: status: { DRDY ERR }
[ 2565.923885] ata1.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 2565.923905] ata1.01: cmd a0/00:00:00:00:00/00:00:00:00:00/b0 tag 0
[ 2565.923907]          cdb 00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00
[ 2565.923909]          res 51/20:03:00:00:00/00:00:00:00:00/b0 Emask 0x1 (device error)
[ 2565.923914] ata1.01: status: { DRDY ERR }
[ 3139.274992] [drm] DAC-6: set mode 640x480 0
[ 3139.391450] [drm] DAC-6: set mode 640x480 0
[ 3139.568714] integrated sync not supported
[ 3139.611157] [drm] TV-14: set mode NTSC 480i 0
[ 3139.761166] [drm] TV-14: set mode NTSC 480i 0
[ 6003.908435] ata1.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 6003.908454] ata1.01: cmd a0/00:00:00:0c:00/00:00:00:00:00/b0 tag 0 pio 16396 in
[ 6003.908457]          cdb 43 00 00 00 00 00 00 00  0c 00 00 00 00 00 00 00
[ 6003.908459]          res 51/20:03:00:00:00/00:00:00:00:00/b0 Emask 0x1 (device error)
[ 6003.908464] ata1.01: status: { DRDY ERR }
[ 6003.908715] sr0: CDROM (ioctl) error, command: Read TOC/PMA/ATIP 43 00 00 00 00 00 00 00 0c 00
[ 6003.908729] sr: Sense Key : Aborted Command [current] [descriptor]
[ 6003.908736] sr: Add. Sense: No additional sense information
[ 7255.984867] ata1.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[ 7255.984875] ata1.01: ST_FIRST: !(DRQ|ERR|DF)
[ 7255.984891] ata1.01: cmd a0/00:00:00:0c:00/00:00:00:00:00/b0 tag 0 pio 16396 in
[ 7255.984893]          cdb 43 00 00 00 00 00 00 00  0c 40 00 00 00 00 00 00
[ 7255.984895]          res 50/00:01:00:0c:00/00:00:00:00:00/b0 Emask 0x2 (HSM violation)
[ 7255.984900] ata1.01: status: { DRDY }
[ 7255.985065] ata1: soft resetting link
[ 7256.177064] ata1.00: configured for UDMA/100
[ 7256.195208] ata1.01: configured for UDMA/33
[ 7256.195574] ata1: EH complete
[11260.957886] ata1.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[11260.957906] ata1.01: cmd a0/00:00:00:08:00/00:00:00:00:00/b0 tag 0 pio 16392 in
[11260.957908]          cdb 25 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00
[11260.957910]          res 51/20:03:00:00:00/00:00:00:00:00/b0 Emask 0x1 (device error)
[11260.957915] ata1.01: status: { DRDY ERR }
[11359.934788] ata1.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[11359.934807] ata1.01: cmd a0/00:00:00:00:00/00:00:00:00:00/b0 tag 0
[11359.934809]          cdb 00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00
[11359.934811]          res 51/20:03:00:00:00/00:00:00:00:00/b0 Emask 0x1 (device error)
[11359.934816] ata1.01: status: { DRDY ERR }
[11883.000052] ata1: lost interrupt (Status 0x58)
[11883.004020] ata1: drained 32768 bytes to clear DRQ.
[11883.093494] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[11883.093500] ata1.00: BMDMA stat 0x64
[11883.093512] ata1.00: cmd c8/00:40:8f:7f:25/00:00:00:00:00/e1 tag 0 dma 32768 in
[11883.093515]          res 58/00:40:8f:7f:25/00:00:00:00:00/e1 Emask 0x2 (HSM violation)
[11883.093519] ata1.00: status: { DRDY DRQ }
[11883.093636] ata1: soft resetting link
[11883.280895] ata1.00: configured for UDMA/100
[11883.298839] ata1.01: configured for UDMA/33
[11883.299131] ata1: EH complete
[14481.918174] ata1.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[14481.918194] ata1.01: cmd a0/00:00:00:0c:00/00:00:00:00:00/b0 tag 0 pio 16396 in
[14481.918197]          cdb 43 00 00 00 00 00 00 00  0c 00 00 00 00 00 00 00
[14481.918198]          res 51/20:03:00:00:00/00:00:00:00:00/b0 Emask 0x1 (device error)
[14481.918204] ata1.01: status: { DRDY ERR }
[14481.918239] sr0: CDROM (ioctl) error, command: Read TOC/PMA/ATIP 43 00 00 00 00 00 00 00 0c 00
[14481.918253] sr: Sense Key : Aborted Command [current] [descriptor]
[14481.918259] sr: Add. Sense: No additional sense information
[14659.938958] ata1.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[14659.938976] ata1.01: cmd a0/00:00:00:00:00/00:00:00:00:00/b0 tag 0
[14659.938978]          cdb 00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00
[14659.938980]          res 51/20:03:00:00:00/00:00:00:00:00/b0 Emask 0x1 (device error)
[14659.938985] ata1.01: status: { DRDY ERR }
[15271.905179] ata1.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[15271.905199] ata1.01: cmd a0/00:00:00:0c:00/00:00:00:00:00/b0 tag 0 pio 16396 in
[15271.905201]          cdb 43 00 00 00 00 00 00 00  0c 40 00 00 00 00 00 00
[15271.905203]          res 51/20:03:00:00:00/00:00:00:00:00/b0 Emask 0x1 (device error)
[15271.905208] ata1.01: status: { DRDY ERR }
[15271.905248] sr0: CDROM (ioctl) error, command: Read TOC/PMA/ATIP 43 00 00 00 00 00 00 00 0c 40
[15271.905262] sr: Sense Key : Aborted Command [current] [descriptor]
[15271.905268] sr: Add. Sense: No additional sense information
[18145.905873] ata1.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[18145.905892] ata1.01: cmd a0/00:00:00:0c:00/00:00:00:00:00/b0 tag 0 pio 16396 in
[18145.905894]          cdb 43 00 00 00 00 00 00 00  0c 00 00 00 00 00 00 00
[18145.905896]          res 51/20:03:00:00:00/00:00:00:00:00/b0 Emask 0x1 (device error)
[18145.905902] ata1.01: status: { DRDY ERR }
[18145.905937] sr0: CDROM (ioctl) error, command: Read TOC/PMA/ATIP 43 00 00 00 00 00 00 00 0c 00
[18145.905950] sr: Sense Key : Aborted Command [current] [descriptor]
[18145.905957] sr: Add. Sense: No additional sense information
[19877.932523] ata1.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[19877.932541] ata1.01: cmd a0/00:00:00:00:00/00:00:00:00:00/b0 tag 0
[19877.932543]          cdb 00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00
[19877.932545]          res 51/20:03:00:00:00/00:00:00:00:00/b0 Emask 0x1 (device error)
[19877.932550] ata1.01: status: { DRDY ERR }
[20246.000290] ata1: lost interrupt (Status 0x58)
[20246.004019] ata1: drained 32768 bytes to clear DRQ.
[20246.093645] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[20246.093651] ata1.00: BMDMA stat 0x64
[20246.093663] ata1.00: cmd c8/00:18:9f:b2:9a/00:00:00:00:00/e1 tag 0 dma 12288 in
[20246.093665]          res 58/00:18:9f:b2:9a/00:00:00:00:00/e1 Emask 0x2 (HSM violation)
[20246.093669] ata1.00: status: { DRDY DRQ }
[20246.093785] ata1: soft resetting link
[20246.280861] ata1.00: configured for UDMA/100
[20246.296402] ata1.01: configured for UDMA/33
[20246.296668] ata1: EH complete
[20936.905724] ata1.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[20936.905744] ata1.01: cmd a0/00:00:00:0c:00/00:00:00:00:00/b0 tag 0 pio 16396 in
[20936.905746]          cdb 43 00 00 00 00 00 00 00  0c 40 00 00 00 00 00 00
[20936.905748]          res 51/20:03:00:00:00/00:00:00:00:00/b0 Emask 0x1 (device error)
[20936.905754] ata1.01: status: { DRDY ERR }
[20936.905790] sr0: CDROM (ioctl) error, command: Read TOC/PMA/ATIP 43 00 00 00 00 00 00 00 0c 40
[20936.905804] sr: Sense Key : Aborted Command [current] [descriptor]
[20936.905810] sr: Add. Sense: No additional sense information
[21278.904228] ata1.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[21278.904248] ata1.01: cmd a0/00:00:00:0c:00/00:00:00:00:00/b0 tag 0 pio 16396 in
[21278.904251]          cdb 43 00 00 00 00 00 00 00  0c 40 00 00 00 00 00 00
[21278.904252]          res 51/20:03:00:00:00/00:00:00:00:00/b0 Emask 0x1 (device error)
[21278.904258] ata1.01: status: { DRDY ERR }
[21278.904300] sr0: CDROM (ioctl) error, command: Read TOC/PMA/ATIP 43 00 00 00 00 00 00 00 0c 40
[21278.904313] sr: Sense Key : Aborted Command [current] [descriptor]
[21278.904320] sr: Add. Sense: No additional sense information

sudo find /etc/apt -type f:

/etc/apt/sources.list
/etc/apt/apt.conf.d/20dbus
/etc/apt/apt.conf.d/15update-stamp
/etc/apt/apt.conf.d/10periodic
/etc/apt/apt.conf.d/20archive
/etc/apt/apt.conf.d/99update-notifier
/etc/apt/apt.conf.d/50unattended-upgrades
/etc/apt/apt.conf.d/70debconf
/etc/apt/apt.conf.d/01autoremove
/etc/apt/apt.conf.d/05aptitude
/etc/apt/apt.conf.d/01ubuntu
/etc/apt/apt.conf.d/00trustcdrom
/etc/apt/trustdb.gpg
/etc/apt/trusted.gpg~
/etc/apt/secring.gpg
/etc/apt/trusted.gpg
/etc/apt/sources.list.d/jaunty-partner.list.distUpgrade
/etc/apt/sources.list.d/jaunty-partner.list
/etc/apt/sources.list.distUpgrade

Par contre, pour /etc/apt/sources.list et /var/log/messages, j'ai pas trouvé comment il fallait faire... (Désolée, j'y connais pas grand chose en informatique )

kyncani · Le 13/03/2010, à 20:05

Pour /etc/apt/sources.list et /var/log/messages, alt+f2 -> gksudo nautilus

Si tu bootes depuis le livecd, tu as plein d'erreur remontées par ton cdrom, grave un autre cd. Si ce n'est pas le cas, retire le cd du lecteur si tu en as un. Si tu n'as pas de cd dans le lecteur, débranche le lecteur de cd si tu peux ou désactive-le dans le bios.
Tu as aussi apparemment une partition fat32 qui est corrompue. (à voir plus tard).
Ca peut également ne pas être un pb matériel mais un bug kernel, si tu bootes depuis ton disque dur, sélectionne au démarrage un noyau plus ancien (touche échappe au grub avant le démarrage de linux).

Reposte après le résultat de dmesg. Pour les premières lignes, ce n'est pas grave.

Lilymage · Le 13/03/2010, à 20:37

Nan, j'utilisais pas de CD, j'ai désactivé mon lecteur dans le bios, et j'ai booté depuis le noyau précédent, ça fonctionne déjà mieux, pas de problème pour le démarrage, mon touchpad est de retour...
Voilà le nouveau dmesg

[    0.172898] system 00:0b: ioport range 0x57c0-0x57df has been reserved
[    0.172903] system 00:0b: ioport range 0x5bb0-0x5bbb has been reserved
[    0.172908] system 00:0b: ioport range 0x5bc0-0x5bdf has been reserved
[    0.172912] system 00:0b: ioport range 0x5fb0-0x5fbb has been reserved
[    0.172917] system 00:0b: ioport range 0x5fc0-0x5fdf has been reserved
[    0.172922] system 00:0b: ioport range 0x63b0-0x63bb has been reserved
[    0.172926] system 00:0b: ioport range 0x63c0-0x63df has been reserved
[    0.172931] system 00:0b: ioport range 0x67b0-0x67bb has been reserved
[    0.172936] system 00:0b: ioport range 0x67c0-0x67df has been reserved
[    0.172940] system 00:0b: ioport range 0x6bb0-0x6bbb has been reserved
[    0.172945] system 00:0b: ioport range 0x6bc0-0x6bdf has been reserved
[    0.172950] system 00:0b: ioport range 0x6fb0-0x6fbb has been reserved
[    0.172954] system 00:0b: ioport range 0x6fc0-0x6fdf has been reserved
[    0.172959] system 00:0b: ioport range 0x73b0-0x73bb has been reserved
[    0.172964] system 00:0b: ioport range 0x73c0-0x73df has been reserved
[    0.172969] system 00:0b: ioport range 0x77b0-0x77bb has been reserved
[    0.172973] system 00:0b: ioport range 0x77c0-0x77df has been reserved
[    0.172978] system 00:0b: ioport range 0x7bb0-0x7bbb has been reserved
[    0.172983] system 00:0b: ioport range 0x7bc0-0x7bdf has been reserved
[    0.172988] system 00:0b: ioport range 0x7fb0-0x7fbb has been reserved
[    0.172992] system 00:0b: ioport range 0x7fc0-0x7fdf has been reserved
[    0.172997] system 00:0b: ioport range 0x83b0-0x83bb has been reserved
[    0.173002] system 00:0b: ioport range 0x83c0-0x83df has been reserved
[    0.173007] system 00:0b: ioport range 0x87b0-0x87bb has been reserved
[    0.173012] system 00:0b: ioport range 0x87c0-0x87df has been reserved
[    0.173016] system 00:0b: ioport range 0x8bb0-0x8bbb has been reserved
[    0.173021] system 00:0b: ioport range 0x8bc0-0x8bdf has been reserved
[    0.173026] system 00:0b: ioport range 0x8fb0-0x8fbb has been reserved
[    0.173031] system 00:0b: ioport range 0x8fc0-0x8fdf has been reserved
[    0.173036] system 00:0b: ioport range 0x93b0-0x93bb has been reserved
[    0.173041] system 00:0b: ioport range 0x93c0-0x93df has been reserved
[    0.173046] system 00:0b: ioport range 0x97b0-0x97bb has been reserved
[    0.173050] system 00:0b: ioport range 0x97c0-0x97df has been reserved
[    0.173055] system 00:0b: ioport range 0x9bb0-0x9bbb has been reserved
[    0.173060] system 00:0b: ioport range 0x9bc0-0x9bdf has been reserved
[    0.173065] system 00:0b: ioport range 0x9fb0-0x9fbb has been reserved
[    0.173070] system 00:0b: ioport range 0x9fc0-0x9fdf has been reserved
[    0.173075] system 00:0b: ioport range 0xa3b0-0xa3bb has been reserved
[    0.173080] system 00:0b: ioport range 0xa3c0-0xa3df has been reserved
[    0.173085] system 00:0b: ioport range 0xa7b0-0xa7bb has been reserved
[    0.173090] system 00:0b: ioport range 0xa7c0-0xa7df has been reserved
[    0.173095] system 00:0b: ioport range 0xabb0-0xabbb has been reserved
[    0.173100] system 00:0b: ioport range 0xabc0-0xabdf has been reserved
[    0.173105] system 00:0b: ioport range 0xafb0-0xafbb has been reserved
[    0.173115] system 00:0b: ioport range 0xafc0-0xafdf has been reserved
[    0.173120] system 00:0b: ioport range 0xb3b0-0xb3bb has been reserved
[    0.173125] system 00:0b: ioport range 0xb3c0-0xb3df has been reserved
[    0.173130] system 00:0b: ioport range 0xb7b0-0xb7bb has been reserved
[    0.173135] system 00:0b: ioport range 0xb7c0-0xb7df has been reserved
[    0.173140] system 00:0b: ioport range 0xbbb0-0xbbbb has been reserved
[    0.173145] system 00:0b: ioport range 0xbbc0-0xbbdf has been reserved
[    0.173150] system 00:0b: ioport range 0xbfb0-0xbfbb has been reserved
[    0.173155] system 00:0b: ioport range 0xbfc0-0xbfdf has been reserved
[    0.173160] system 00:0b: ioport range 0xc3b0-0xc3bb has been reserved
[    0.173165] system 00:0b: ioport range 0xc3c0-0xc3df has been reserved
[    0.173170] system 00:0b: ioport range 0xc7b0-0xc7bb has been reserved
[    0.173175] system 00:0b: ioport range 0xc7c0-0xc7df has been reserved
[    0.173181] system 00:0b: ioport range 0xcbb0-0xcbbb has been reserved
[    0.173186] system 00:0b: ioport range 0xcbc0-0xcbdf has been reserved
[    0.173191] system 00:0b: ioport range 0xcfb0-0xcfbb has been reserved
[    0.173196] system 00:0b: ioport range 0xcfc0-0xcfdf has been reserved
[    0.173205] system 00:0b: ioport range 0xe3b0-0xe3bb has been reserved
[    0.173210] system 00:0b: ioport range 0xe3c0-0xe3df has been reserved
[    0.173215] system 00:0b: ioport range 0xe7b0-0xe7bb has been reserved
[    0.173220] system 00:0b: ioport range 0xe7c0-0xe7df has been reserved
[    0.173225] system 00:0b: ioport range 0xebb0-0xebbb has been reserved
[    0.173231] system 00:0b: ioport range 0xebc0-0xebdf has been reserved
[    0.173236] system 00:0b: ioport range 0xefb0-0xefbb has been reserved
[    0.173241] system 00:0b: ioport range 0xefc0-0xefdf has been reserved
[    0.173246] system 00:0b: ioport range 0xf3b0-0xf3bb has been reserved
[    0.173252] system 00:0b: ioport range 0xf3c0-0xf3df has been reserved
[    0.173257] system 00:0b: ioport range 0xf7b0-0xf7bb has been reserved
[    0.173262] system 00:0b: ioport range 0xf7c0-0xf7df has been reserved
[    0.173267] system 00:0b: ioport range 0xfbb0-0xfbbb has been reserved
[    0.173273] system 00:0b: ioport range 0xfbc0-0xfbdf has been reserved
[    0.173278] system 00:0b: ioport range 0xffb0-0xffbb has been reserved
[    0.173283] system 00:0b: ioport range 0xffc0-0xffdf has been reserved
[    0.208040] AppArmor: AppArmor Filesystem Enabled
[    0.208087] pci 0000:02:01.0: CardBus bridge, secondary bus 0000:03
[    0.208091] pci 0000:02:01.0:   IO window: 0x00d000-0x00d0ff
[    0.208099] pci 0000:02:01.0:   IO window: 0x00d400-0x00d4ff
[    0.208106] pci 0000:02:01.0:   PREFETCH window: 0x50000000-0x53ffffff
[    0.208114] pci 0000:02:01.0:   MEM window: 0x54000000-0x57ffffff
[    0.208121] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:02
[    0.208126] pci 0000:00:1e.0:   IO window: 0xd000-0xdfff
[    0.208134] pci 0000:00:1e.0:   MEM window: 0xdfd00000-0xdfdfffff
[    0.208141] pci 0000:00:1e.0:   PREFETCH window: 0x50000000-0x53ffffff
[    0.208158] pci 0000:00:1e.0: setting latency timer to 64
[    0.208170] pci 0000:02:01.0: enabling device (0000 -> 0003)
[    0.208180]   alloc irq_desc for 16 on node -1
[    0.208184]   alloc kstat_irqs on node -1
[    0.208192] pci 0000:02:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    0.208204] pci_bus 0000:00: resource 0 io:  [0x00-0xffff]
[    0.208208] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff]
[    0.208213] pci_bus 0000:02: resource 0 io:  [0xd000-0xdfff]
[    0.208217] pci_bus 0000:02: resource 1 mem: [0xdfd00000-0xdfdfffff]
[    0.208221] pci_bus 0000:02: resource 2 pref mem [0x50000000-0x53ffffff]
[    0.208225] pci_bus 0000:02: resource 3 io:  [0x00-0xffff]
[    0.208229] pci_bus 0000:02: resource 4 mem: [0x000000-0xffffffff]
[    0.208233] pci_bus 0000:03: resource 0 io:  [0xd000-0xd0ff]
[    0.208236] pci_bus 0000:03: resource 1 io:  [0xd400-0xd4ff]
[    0.208240] pci_bus 0000:03: resource 2 pref mem [0x50000000-0x53ffffff]
[    0.208245] pci_bus 0000:03: resource 3 mem: [0x54000000-0x57ffffff]
[    0.208301] NET: Registered protocol family 2
[    0.208443] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.208890] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.210304] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[    0.211185] TCP: Hash tables configured (established 131072 bind 65536)
[    0.211192] TCP reno registered
[    0.211386] NET: Registered protocol family 1
[    0.211502] Trying to unpack rootfs image as initramfs...
[    0.511318] Freeing initrd memory: 7472k freed
[    0.519721] cpufreq-nforce2: No nForce2 chipset.
[    0.519784] Scanning for low memory corruption every 60 seconds
[    0.520044] audit: initializing netlink socket (disabled)
[    0.520071] type=2000 audit(1268504487.519:1): initialized
[    0.532734] highmem bounce pool size: 64 pages
[    0.532745] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[    0.534770] VFS: Disk quotas dquot_6.5.2
[    0.534850] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    0.535605] fuse init (API version 7.12)
[    0.535724] msgmni has been set to 1725
[    0.536020] alg: No test for stdrng (krng)
[    0.536038] io scheduler noop registered
[    0.536041] io scheduler anticipatory registered
[    0.536044] io scheduler deadline registered
[    0.536104] io scheduler cfq registered (default)
[    0.536125] pci 0000:00:02.0: Boot video device
[    0.536246] pci 0000:02:08.0: Firmware left e100 interrupts enabled; disabling
[    0.536348] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    0.536385] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    0.537067] ACPI: AC Adapter [AC] (on-line)
[    0.537196] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input0
[    0.537717] ACPI: Lid Switch [LID]
[    0.537787] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
[    0.537795] ACPI: Power Button [PBTN]
[    0.537858] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input2
[    0.537862] ACPI: Sleep Button [SBTN]
[    0.538396] Marking TSC unstable due to TSC halts in idle
[    0.538431] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
[    0.538466] processor LNXCPU:00: registered as cooling_device0
[    0.538471] ACPI: Processor [CPU0] (supports 8 throttling states)
[    0.542497] Switched to high resolution mode on CPU 0
[    0.544996] thermal LNXTHERM:01: registered as thermal_zone0
[    0.545008] ACPI: Thermal Zone [THM] (64 C)
[    0.545073] isapnp: Scanning for PnP cards...
[    0.841875] ACPI: Battery Slot [BAT0] (battery present)
[    0.928940] isapnp: No Plug & Play device found
[    0.930440] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    0.930952]   alloc irq_desc for 17 on node -1
[    0.930956]   alloc kstat_irqs on node -1
[    0.930966] serial 0000:00:1e.3: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[    0.930976] serial 0000:00:1e.3: PCI INT B disabled
[    0.932267] brd: module loaded
[    0.932909] loop: module loaded
[    0.933024] input: Macintosh mouse button emulation as /devices/virtual/input/input3
[    0.933177] ata_piix 0000:00:1f.1: version 2.13
[    0.933191] ata_piix 0000:00:1f.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    0.933245] ata_piix 0000:00:1f.1: setting latency timer to 64
[    0.933437] scsi0 : ata_piix
[    0.933560] scsi1 : ata_piix
[    0.934363] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xbfa0 irq 14
[    0.934370] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xbfa8 irq 15
[    0.935501] Fixed MDIO Bus: probed
[    0.935551] PPP generic driver version 2.4.2
[    0.935672] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.935697] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    0.935718] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[    0.935723] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[    0.935801] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
[    0.939723] ehci_hcd 0000:00:1d.7: debug port 1
[    0.939731] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[    0.940279] ata2: port disabled. ignoring.
[    0.940314] ehci_hcd 0000:00:1d.7: irq 16, io mem 0xffa80800
[    0.956023] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[    0.956145] usb usb1: configuration #1 chosen from 1 choice
[    0.956189] hub 1-0:1.0: USB hub found
[    0.956201] hub 1-0:1.0: 8 ports detected
[    0.956299] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    0.956322] uhci_hcd: USB Universal Host Controller Interface driver
[    0.956366] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    0.956377] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[    0.956382] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[    0.956434] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[    0.956464] uhci_hcd 0000:00:1d.0: irq 16, io base 0x0000bf80
[    0.956570] usb usb2: configuration #1 chosen from 1 choice
[    0.956611] hub 2-0:1.0: USB hub found
[    0.956620] hub 2-0:1.0: 2 ports detected
[    0.956680] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[    0.956690] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[    0.956695] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[    0.956739] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[    0.956781] uhci_hcd 0000:00:1d.1: irq 17, io base 0x0000bf60
[    0.956894] usb usb3: configuration #1 chosen from 1 choice
[    0.956930] hub 3-0:1.0: USB hub found
[    0.956938] hub 3-0:1.0: 2 ports detected
[    0.956995]   alloc irq_desc for 18 on node -1
[    0.956999]   alloc kstat_irqs on node -1
[    0.957007] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[    0.957016] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[    0.957020] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[    0.957059] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[    0.957097] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000bf40
[    0.957209] usb usb4: configuration #1 chosen from 1 choice
[    0.957245] hub 4-0:1.0: USB hub found
[    0.957254] hub 4-0:1.0: 2 ports detected
[    0.957311]   alloc irq_desc for 19 on node -1
[    0.957314]   alloc kstat_irqs on node -1
[    0.957319] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[    0.957328] uhci_hcd 0000:00:1d.3: setting latency timer to 64
[    0.957332] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[    0.957381] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
[    0.957418] uhci_hcd 0000:00:1d.3: irq 19, io base 0x0000bf20
[    0.957522] usb usb5: configuration #1 chosen from 1 choice
[    0.957559] hub 5-0:1.0: USB hub found
[    0.957567] hub 5-0:1.0: 2 ports detected
[    0.957706] PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[    0.962574] serio: i8042 KBD port at 0x60,0x64 irq 1
[    0.962582] serio: i8042 AUX port at 0x60,0x64 irq 12
[    0.962657] mice: PS/2 mouse device common for all mice
[    0.962864] rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
[    0.962904] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[    0.963044] device-mapper: uevent: version 1.0.3
[    0.963178] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com
[    0.963282] device-mapper: multipath: version 1.1.0 loaded
[    0.963286] device-mapper: multipath round-robin: version 1.0.0 loaded
[    0.963449] EISA: Probing bus 0 at eisa.0
[    0.963458] Cannot allocate resource for EISA slot 1
[    0.963495] EISA: Detected 0 cards.
[    0.963611] cpuidle: using governor ladder
[    0.963709] cpuidle: using governor menu
[    0.964379] TCP cubic registered
[    0.964603] NET: Registered protocol family 10
[    0.965207] lo: Disabled Privacy Extensions
[    0.965621] NET: Registered protocol family 17
[    0.965651] Bluetooth: L2CAP ver 2.13
[    0.965653] Bluetooth: L2CAP socket layer initialized
[    0.965659] Bluetooth: SCO (Voice Link) ver 0.6
[    0.965662] Bluetooth: SCO socket layer initialized
[    0.965718] Bluetooth: RFCOMM TTY layer initialized
[    0.965723] Bluetooth: RFCOMM socket layer initialized
[    0.965725] Bluetooth: RFCOMM ver 1.11
[    0.965770] Using IPI No-Shortcut mode
[    0.965858] PM: Resume from disk failed.
[    0.965884] registered taskstats version 1
[    0.966029]   Magic number: 2:689:392
[    0.966102] button PNP0C0D:00: hash matches
[    0.966142] rtc_cmos 00:06: setting system clock to 2010-03-13 18:21:28 UTC (1268504488)
[    0.966147] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    0.966150] EDD information not available.
[    0.967890] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
[    1.112964] ata1.00: ATA-6: HTS548040M9AT00, MG2OA5EA, max UDMA/100
[    1.112969] ata1.00: 78140160 sectors, multi 8: LBA48 
[    1.113024] ata1.01: ATAPI: PHILIPS CD-RW/DVD-ROM SCB5265, TD15, max UDMA/33
[    1.128062] Clocksource tsc unstable (delta = -113770213 ns)
[    1.128884] ata1.00: configured for UDMA/100
[    1.144463] ata1.01: configured for UDMA/33
[    1.146944] scsi 0:0:0:0: Direct-Access     ATA      HTS548040M9AT00  MG2O PQ: 0 ANSI: 5
[    1.147112] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    1.147775] sd 0:0:0:0: [sda] 78140160 512-byte logical blocks: (40.0 GB/37.2 GiB)
[    1.147841] sd 0:0:0:0: [sda] Write Protect is off
[    1.147845] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    1.147881] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.148075]  sda:
[    1.148217] scsi 0:0:1:0: CD-ROM            PHILIPS  CDRW/DVD SCB5265 TD15 PQ: 0 ANSI: 5
[    1.174681]  sda1 sda2 < sda5 >
[    1.208998] sd 0:0:0:0: [sda] Attached SCSI disk
[    1.212327] sr0: scsi3-mmc drive: 4x/24x writer cd/rw xa/form2 cdda tray
[    1.212332] Uniform CD-ROM driver Revision: 3.20
[    1.212430] sr 0:0:1:0: Attached scsi CD-ROM sr0
[    1.212494] sr 0:0:1:0: Attached scsi generic sg1 type 5
[    1.212526] Freeing unused kernel memory: 540k freed
[    1.212947] Write protecting the kernel text: 4568k
[    1.212998] Write protecting the kernel read-only data: 1836k
[    1.434644] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A03:00/device:18/input/input5
[    1.434708] ACPI: Video Device [VID] (multi-head: yes  rom: no  post: no)
[    1.434765] ACPI Warning: \_SB_.PCI0.VID2._DOD: Return Package has no elements (empty) 20090521 nspredef-434
[    1.434847] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A03:00/device:1d/input/input6
[    1.434880] ACPI: Video Device [VID2] (multi-head: yes  rom: no  post: no)
[    1.464359] usb 2-1: new low speed USB device using uhci_hcd and address 2
[    1.487201] Linux agpgart interface v0.103
[    1.501981] agpgart-intel 0000:00:00.0: Intel 915GM Chipset
[    1.502433] agpgart-intel 0000:00:00.0: detected 7932K stolen memory
[    1.505972] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xc0000000
[    1.625963] [drm] Initialized drm 1.1.0 20060810
[    1.646909] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    1.646919] i915 0000:00:02.0: setting latency timer to 64
[    1.662261] usb 2-1: configuration #1 chosen from 1 choice
[    1.770264] ata1.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[    1.770270] ata1.01: ST_FIRST: !(DRQ|ERR|DF)
[    1.770286] ata1.01: cmd a0/00:00:00:08:00/00:00:00:00:00/b0 tag 0 pio 16392 in
[    1.770288]          cdb 25 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00
[    1.770290]          res 50/00:01:00:08:00/00:00:00:00:00/b0 Emask 0x2 (HSM violation)
[    1.770295] ata1.01: status: { DRDY }
[    1.770414] ata1: soft resetting link
[    1.770830] e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI
[    1.770833] e100: Copyright(c) 1999-2006 Intel Corporation
[    1.770898]   alloc irq_desc for 20 on node -1
[    1.770902]   alloc kstat_irqs on node -1
[    1.770912] e100 0000:02:08.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[    1.798263] e100 0000:02:08.0: PME# disabled
[    1.805145] usbcore: registered new interface driver hiddev
[    1.806594] e100: eth0: e100_probe: addr 0xdfdff000, irq 20, MAC addr 00:12:3f:f5:17:2e
[    1.807086] integrated sync not supported
[    2.298789] [drm] DAC-6: set mode 640x480 0
[    2.299395] input: PS/2+USB Mouse as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1:1.0/input/input7
[    2.299508] generic-usb 0003:04F3:0210.0001: input,hidraw0: USB HID v1.11 Mouse [PS/2+USB Mouse] on usb-0000:00:1d.0-1/input0
[    2.299532] usbcore: registered new interface driver usbhid
[    2.299536] usbhid: v2.6:USB HID core driver
[    2.486423] integrated sync not supported
[    2.527108] [drm] TV-14: set mode NTSC 480i 0
[    2.655120] [drm] fb0: inteldrmfb frame buffer device
[    2.655134] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[    2.655437] ata1.00: configured for UDMA/100
[    2.708233] ata1.01: configured for UDMA/33
[    2.710652] ata1: EH complete
[    2.719374] render error detected, EIR: 0x00000010
[    2.719377] page table error
[    2.719379]   PGTBL_ER: 0x00000100
[    2.719383] [drm:i915_handle_error] *ERROR* EIR stuck: 0x00000010, masking
[    2.719392] render error detected, EIR: 0x00000010
[    2.719394] page table error
[    2.719396]   PGTBL_ER: 0x00000100
[    2.730685] [drm] LVDS-8: set mode 1024x768 17
[    3.149162] Console: switching to colour frame buffer device 128x48
[    3.560143] PM: Starting manual resume from disk
[    3.560149] PM: Resume from partition 8:5
[    3.560152] PM: Checking hibernation image.
[    3.560363] PM: Resume from disk failed.
[    3.615298] kjournald starting.  Commit interval 5 seconds
[    3.615314] EXT3-fs: mounted filesystem with writeback data mode.
[    5.184568] type=1505 audit(1268504492.717:2): operation="profile_load" pid=367 name=/usr/share/gdm/guest-session/Xsession
[    5.214004] type=1505 audit(1268504492.745:3): operation="profile_load" pid=368 name=/sbin/dhclient3
[    5.214909] type=1505 audit(1268504492.745:4): operation="profile_load" pid=368 name=/usr/lib/NetworkManager/nm-dhcp-client.action
[    5.215400] type=1505 audit(1268504492.745:5): operation="profile_load" pid=368 name=/usr/lib/connman/scripts/dhclient-script
[    5.291129] type=1505 audit(1268504492.822:6): operation="profile_load" pid=369 name=/usr/bin/evince
[    5.306097] type=1505 audit(1268504492.837:7): operation="profile_load" pid=369 name=/usr/bin/evince-previewer
[    5.314865] type=1505 audit(1268504492.845:8): operation="profile_load" pid=369 name=/usr/bin/evince-thumbnailer
[    5.368259] type=1505 audit(1268504492.901:9): operation="profile_load" pid=371 name=/usr/lib/cups/backend/cups-pdf
[    5.369327] type=1505 audit(1268504492.901:10): operation="profile_load" pid=371 name=/usr/sbin/cupsd
[   34.012195] udev: starting version 147
[   34.029935] Adding 706820k swap on /dev/sda5.  Priority:-1 extents:1 across:706820k 
[   34.657308] ip_tables: (C) 2000-2006 Netfilter Core Team
[   34.704213] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
[   35.102503] dell-wmi: No known WMI GUID found
[   35.261828] Synaptics Touchpad, model: 1, fw: 6.2, id: 0x8fa0b1, caps: 0xa04713/0x200000
[   35.269630] intel_rng: FWH not detected
[   35.275951] lp: driver loaded but no devices found
[   35.310570] yenta_cardbus 0000:02:01.0: CardBus bridge found [1028:01a6]
[   35.310599] yenta_cardbus 0000:02:01.0: Using CSCINT to route CSC interrupts to PCI
[   35.310603] yenta_cardbus 0000:02:01.0: Routing CardBus interrupts to PCI
[   35.310610] yenta_cardbus 0000:02:01.0: TI: mfunc 0x00001002, devctl 0x64
[   35.314068] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input8
[   35.448763] EXT3 FS on sda1, internal journal
[   35.540835] yenta_cardbus 0000:02:01.0: ISA IRQ mask 0x0cf8, PCI irq 16
[   35.540843] yenta_cardbus 0000:02:01.0: Socket status: 30000007
[   35.540849] pci_bus 0000:02: Raising subordinate bus# of parent bus (#02) from #03 to #06
[   35.540862] yenta_cardbus 0000:02:01.0: pcmcia: parent PCI bridge I/O window: 0xd000 - 0xdfff
[   35.540867] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xd000-0xdfff: clean.
[   35.541514] yenta_cardbus 0000:02:01.0: pcmcia: parent PCI bridge Memory window: 0xdfd00000 - 0xdfdfffff
[   35.541518] yenta_cardbus 0000:02:01.0: pcmcia: parent PCI bridge Memory window: 0x50000000 - 0x53ffffff
[   35.625250] Disabling lock debugging due to kernel taint
[   35.633358] ndiswrapper version 1.55 loaded (smp=yes, preempt=no)
[   35.719154] usbcore: registered new interface driver ndiswrapper
[   36.136635] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x100-0x3af: clean.
[   36.138358] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x3e0-0x4ff: clean.
[   36.139092] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x820-0x8ff: clean.
[   36.139703] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xc00-0xcf7: clean.
[   36.140528] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xa00-0xaff: clean.
[   36.557981] ADDRCONF(NETDEV_UP): eth0: link is not ready
[   36.717395] __ratelimit: 3 callbacks suppressed
[   36.717401] type=1505 audit(1268504524.249:12): operation="profile_replace" pid=874 name=/usr/share/gdm/guest-session/Xsession
[   36.720390] type=1505 audit(1268504524.253:13): operation="profile_replace" pid=875 name=/sbin/dhclient3
[   36.721299] type=1505 audit(1268504524.253:14): operation="profile_replace" pid=875 name=/usr/lib/NetworkManager/nm-dhcp-client.action
[   36.721794] type=1505 audit(1268504524.253:15): operation="profile_replace" pid=875 name=/usr/lib/connman/scripts/dhclient-script
[   36.729681] type=1505 audit(1268504524.261:16): operation="profile_replace" pid=876 name=/usr/bin/evince
[   36.746129] type=1505 audit(1268504524.277:17): operation="profile_replace" pid=876 name=/usr/bin/evince-previewer
[   36.754958] type=1505 audit(1268504524.285:18): operation="profile_replace" pid=876 name=/usr/bin/evince-thumbnailer
[   36.768600] type=1505 audit(1268504524.301:19): operation="profile_replace" pid=878 name=/usr/lib/cups/backend/cups-pdf
[   36.769671] type=1505 audit(1268504524.301:20): operation="profile_replace" pid=878 name=/usr/sbin/cupsd
[   36.773002] type=1505 audit(1268504524.305:21): operation="profile_replace" pid=879 name=/usr/sbin/tcpdump
[   37.027902] Intel ICH 0000:00:1e.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[   37.027950] Intel ICH 0000:00:1e.2: setting latency timer to 64
[   37.781007] [drm] DAC-6: set mode 640x480 0
[   37.894978] [drm] DAC-6: set mode 640x480 0
[   37.958773] intel8x0_measure_ac97_clock: measured 108934 usecs (5239 samples)
[   37.958779] intel8x0: clocking to 48000
[   38.152697] ppdev: user-space parallel port driver
[   38.165763] integrated sync not supported
[   38.206606] [drm] TV-14: set mode NTSC 480i 0
[   38.349869] [drm] TV-14: set mode NTSC 480i 0
[   38.495194] [drm] DAC-6: set mode 640x480 0
[   38.604410] [drm] DAC-6: set mode 640x480 0
[   38.816183] e100: eth0 NIC Link is Up 100 Mbps Full Duplex
[   38.818150] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[   38.868744] integrated sync not supported
[   38.910902] [drm] TV-14: set mode NTSC 480i 0
[   39.083569] [drm] TV-14: set mode NTSC 480i 0
[   42.572899] [drm] DAC-6: set mode 640x480 0
[   42.706558] [drm] DAC-6: set mode 640x480 0
[   42.871232] integrated sync not supported
[   42.913395] [drm] TV-14: set mode NTSC 480i 0
[   43.119643] [drm] TV-14: set mode NTSC 480i 0
[   43.272842] [drm] DAC-6: set mode 640x480 0
[   43.380155] [drm] DAC-6: set mode 640x480 0
[   43.544096] integrated sync not supported
[   43.586267] [drm] TV-14: set mode NTSC 480i 0
[   43.607541] ata1.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[   43.607547] ata1.01: ST_FIRST: !(DRQ|ERR|DF)
[   43.607561] ata1.01: cmd a0/00:00:00:00:00/00:00:00:00:00/b0 tag 0
[   43.607563]          cdb 00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00
[   43.607565]          res 50/00:01:00:00:00/00:00:00:00:00/b0 Emask 0x2 (HSM violation)
[   43.607570] ata1.01: status: { DRDY }
[   43.607684] ata1: soft resetting link
[   43.730871] [drm] TV-14: set mode NTSC 480i 0
[   43.881809] [drm] DAC-6: set mode 640x480 0
[   43.988633] [drm] DAC-6: set mode 640x480 0
[   44.152132] ata1.00: configured for UDMA/100
[   44.152370] integrated sync not supported
[   44.194513] [drm] TV-14: set mode NTSC 480i 0
[   44.295529] ata1.01: configured for UDMA/33
[   44.336318] [drm] TV-14: set mode NTSC 480i 0
[   44.356271] ata1: EH complete
[   46.086097] [drm] DAC-6: set mode 640x480 0
[   46.192776] [drm] DAC-6: set mode 640x480 0
[   46.359155] integrated sync not supported
[   46.401315] [drm] TV-14: set mode NTSC 480i 0
[   46.542903] [drm] TV-14: set mode NTSC 480i 0
[   48.948033] eth0: no IPv6 routers present
[  124.712864] ata1.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[  124.712883] ata1.01: cmd a0/00:00:00:00:00/00:00:00:00:00/b0 tag 0
[  124.712885]          cdb 00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00
[  124.712887]          res 51/20:03:00:00:00/00:00:00:00:00/b0 Emask 0x1 (device error)
[  124.712892] ata1.01: status: { DRDY ERR }
[  129.712174] ata1.01: qc timeout (cmd 0xa0)
[  129.712194] ata1.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[  129.712211] ata1.01: cmd a0/00:00:00:00:00/00:00:00:00:00/b0 tag 0
[  129.712213]          cdb 00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00
[  129.712215]          res 51/20:03:00:00:00/00:00:00:00:00/b0 Emask 0x5 (timeout)
[  129.712220] ata1.01: status: { DRDY ERR }
[  134.752071] ata1: link is slow to respond, please be patient (ready=0)
[  139.736072] ata1: device not ready (errno=-16), forcing hardreset
[  139.736166] ata1: soft resetting link
[  139.948922] ata1.00: configured for UDMA/100
[  139.964430] ata1.01: configured for UDMA/33
[  139.964740] ata1: EH complete

Et si j'ai bien compris ce que tu voulais, /etc/apt/sources.list:

# deb cdrom:[Ubuntu 9.04 _Jaunty Jackalope_ - Release i386 (20090420.1)]/ jaunty main restricted
# See http://help.ubuntu.com/community/UpgradeNotes for how to upgrade to
# newer versions of the distribution.

deb http://fr.archive.ubuntu.com/ubuntu/ karmic main restricted
deb-src http://fr.archive.ubuntu.com/ubuntu/ karmic main restricted

## Major bug fix updates produced after the final release of the
## distribution.
deb http://fr.archive.ubuntu.com/ubuntu/ karmic-updates main restricted
deb-src http://fr.archive.ubuntu.com/ubuntu/ karmic-updates main restricted

## N.B. software from this repository is ENTIRELY UNSUPPORTED by the Ubuntu
## team. Also, please note that software in universe WILL NOT receive any
## review or updates from the Ubuntu security team.
deb http://fr.archive.ubuntu.com/ubuntu/ karmic universe
deb-src http://fr.archive.ubuntu.com/ubuntu/ karmic universe
deb http://fr.archive.ubuntu.com/ubuntu/ karmic-updates universe
deb-src http://fr.archive.ubuntu.com/ubuntu/ karmic-updates universe

## N.B. software from this repository is ENTIRELY UNSUPPORTED by the Ubuntu 
## team, and may not be under a free licence. Please satisfy yourself as to 
## your rights to use the software. Also, please note that software in 
## multiverse WILL NOT receive any review or updates from the Ubuntu
## security team.
deb http://fr.archive.ubuntu.com/ubuntu/ karmic multiverse
deb-src http://fr.archive.ubuntu.com/ubuntu/ karmic multiverse
deb http://fr.archive.ubuntu.com/ubuntu/ karmic-updates multiverse
deb-src http://fr.archive.ubuntu.com/ubuntu/ karmic-updates multiverse

## Uncomment the following two lines to add software from the 'backports'
## repository.
## N.B. software from this repository may not have been tested as
## extensively as that contained in the main release, although it includes
## newer versions of some applications which may provide useful features.
## Also, please note that software in backports WILL NOT receive any review
## or updates from the Ubuntu security team.
# deb http://fr.archive.ubuntu.com/ubuntu/ jaunty-backports main restricted universe multiverse
# deb-src http://fr.archive.ubuntu.com/ubuntu/ jaunty-backports main restricted universe multiverse

## Uncomment the following two lines to add software from Canonical's
## 'partner' repository.
## This software is not part of Ubuntu, but is offered by Canonical and the
## respective vendors as a service to Ubuntu users.
# deb http://archive.canonical.com/ubuntu jaunty partner
# deb-src http://archive.canonical.com/ubuntu jaunty partner

deb http://security.ubuntu.com/ubuntu karmic-security main restricted
deb-src http://security.ubuntu.com/ubuntu karmic-security main restricted
deb http://security.ubuntu.com/ubuntu karmic-security universe
deb-src http://security.ubuntu.com/ubuntu karmic-security universe
deb http://security.ubuntu.com/ubuntu karmic-security multiverse
deb-src http://security.ubuntu.com/ubuntu karmic-security multiverse

et... pour /var/log/messages je peux pas l'ouvrir...

kyncani · Le 13/03/2010, à 21:04

Pour /var/log/messages, il faut être root, donc depuis le nautilus ouvert par alt+f2 -> gksudo nautilus
Tu as un périphérique ata qui fonctionne en udma 33 et non pas en udma 100, rien de grave je suppose.
Le sources.list est correct, pas de repositories exotiques.
Pour ton lecteur de cd, si il ne fonctionne avec aucun noyau (essaie d'autres anciens livecd, tape dmesg et cherche des erreurs liés au cdrom), il est peut être défectueux. En tout cas, en l'ayant débranché, tu n'as plus les milliers d'erreurs qu'il levait.

Lilymage · Le 13/03/2010, à 21:25

En fait, pour /var/log/messages, le problème c'est:

gedit n'a pas été capable de détecter le codage des caractères.
Vérifiez que vous n'essayez pas d'ouvrir un fichier binaire.
Sélectionnez un codage des caractères dans le menu et réessayez.

J'ai bien sûr essayé de changer le codage, sans succès.
Par contre je peux ouvrir /var/log/messages.1...

Dernière modification par Lilymage (Le 13/03/2010, à 21:26)

kyncani · Le 13/03/2010, à 21:31

Muf, bon, tu peux le supprimer alors et rebooter pour qu'il soit correctement recréé. ( Il faut être root hein, alt+f2 machin chose )

Lilymage · Le 13/03/2010, à 22:22

Voilà /var/log/messages (première partie, c'était trop gros pour que le forum accepte que je mette tout dans le même message >.<):

Mar 13 21:15:46 lilymage-laptop kernel: imklog 4.2.0, log source = /var/run/rsyslog/kmsg started.
Mar 13 21:15:46 lilymage-laptop rsyslogd: [origin software="rsyslogd" swVersion="4.2.0" x-pid="706" x-info="http://www.rsyslog.com"] (re)start
Mar 13 21:15:47 lilymage-laptop rsyslogd: rsyslogd's groupid changed to 102
Mar 13 21:15:47 lilymage-laptop rsyslogd: rsyslogd's userid changed to 101
Mar 13 21:15:47 lilymage-laptop kernel: [    0.000000] Initializing cgroup subsys cpuset
Mar 13 21:15:47 lilymage-laptop kernel: [    0.000000] Initializing cgroup subsys cpu
Mar 13 21:15:47 lilymage-laptop kernel: [    0.000000] Linux version 2.6.31-19-generic (buildd@palmer) (gcc version 4.4.1 (Ubuntu 4.4.1-4ubuntu8) ) #56-Ubuntu SMP Thu Jan 28 01:26:53 UTC 2010 (Ubuntu 2.6.31-19.56-generic)
Mar 13 21:15:47 lilymage-laptop kernel: [    0.000000] KERNEL supported cpus:
Mar 13 21:15:47 lilymage-laptop kernel: [    0.000000]   Intel GenuineIntel
Mar 13 21:15:47 lilymage-laptop kernel: [    0.000000]   AMD AuthenticAMD
Mar 13 21:15:47 lilymage-laptop kernel: [    0.000000]   NSC Geode by NSC
Mar 13 21:15:47 lilymage-laptop kernel: [    0.000000]   Cyrix CyrixInstead
Mar 13 21:15:47 lilymage-laptop kernel: [    0.000000]   Centaur CentaurHauls
Mar 13 21:15:47 lilymage-laptop kernel: [    0.000000]   Transmeta GenuineTMx86
Mar 13 21:15:47 lilymage-laptop kernel: [    0.000000]   Transmeta TransmetaCPU
Mar 13 21:15:47 lilymage-laptop kernel: [    0.000000]   UMC UMC UMC UMC
Mar 13 21:15:47 lilymage-laptop kernel: [    0.000000] BIOS-provided physical RAM map:
Mar 13 21:15:47 lilymage-laptop kernel: [    0.000000]  BIOS-e820: 0000000000000000 - 000000000009f000 (usable)
Mar 13 21:15:47 lilymage-laptop kernel: [    0.000000]  BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved)
Mar 13 21:15:47 lilymage-laptop kernel: [    0.000000]  BIOS-e820: 0000000000100000 - 000000004f7d3800 (usable)
Mar 13 21:15:47 lilymage-laptop kernel: [    0.000000]  BIOS-e820: 000000004f7d3800 - 0000000050000000 (reserved)
Mar 13 21:15:47 lilymage-laptop kernel: [    0.000000]  BIOS-e820: 00000000e0000000 - 00000000f0007000 (reserved)
Mar 13 21:15:47 lilymage-laptop kernel: [    0.000000]  BIOS-e820: 00000000f0008000 - 00000000f000c000 (reserved)
Mar 13 21:15:47 lilymage-laptop kernel: [    0.000000]  BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
Mar 13 21:15:47 lilymage-laptop kernel: [    0.000000]  BIOS-e820: 00000000fed20000 - 00000000fee10000 (reserved)
Mar 13 21:15:47 lilymage-laptop kernel: [    0.000000]  BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved)
Mar 13 21:15:47 lilymage-laptop kernel: [    0.000000] DMI 2.3 present.
Mar 13 21:15:47 lilymage-laptop kernel: [    0.000000] last_pfn = 0x4f7d3 max_arch_pfn = 0x100000
Mar 13 21:15:47 lilymage-laptop kernel: [    0.000000] PAT not supported by CPU.
Mar 13 21:15:47 lilymage-laptop kernel: [    0.000000] Scanning 1 areas for low memory corruption
Mar 13 21:15:47 lilymage-laptop kernel: [    0.000000] modified physical RAM map:
Mar 13 21:15:47 lilymage-laptop kernel: [    0.000000]  modified: 0000000000000000 - 0000000000002000 (usable)
Mar 13 21:15:47 lilymage-laptop kernel: [    0.000000]  modified: 0000000000002000 - 0000000000006000 (reserved)
Mar 13 21:15:47 lilymage-laptop kernel: [    0.000000]  modified: 0000000000006000 - 000000000009f000 (usable)
Mar 13 21:15:47 lilymage-laptop kernel: [    0.000000]  modified: 000000000009f000 - 00000000000a0000 (reserved)
Mar 13 21:15:47 lilymage-laptop kernel: [    0.000000]  modified: 0000000000100000 - 000000004f7d3800 (usable)
Mar 13 21:15:47 lilymage-laptop kernel: [    0.000000]  modified: 000000004f7d3800 - 0000000050000000 (reserved)
Mar 13 21:15:47 lilymage-laptop kernel: [    0.000000]  modified: 00000000e0000000 - 00000000f0007000 (reserved)
Mar 13 21:15:47 lilymage-laptop kernel: [    0.000000]  modified: 00000000f0008000 - 00000000f000c000 (reserved)
Mar 13 21:15:47 lilymage-laptop kernel: [    0.000000]  modified: 00000000fec00000 - 00000000fec10000 (reserved)
Mar 13 21:15:47 lilymage-laptop kernel: [    0.000000]  modified: 00000000fed20000 - 00000000fee10000 (reserved)
Mar 13 21:15:47 lilymage-laptop kernel: [    0.000000]  modified: 00000000ffb00000 - 0000000100000000 (reserved)
Mar 13 21:15:47 lilymage-laptop kernel: [    0.000000] init_memory_mapping: 0000000000000000-00000000377fe000
Mar 13 21:15:47 lilymage-laptop kernel: [    0.000000] Using x86 segment limits to approximate NX protection
Mar 13 21:15:47 lilymage-laptop kernel: [    0.000000] RAMDISK: 378a3000 - 37fef29f
Mar 13 21:15:47 lilymage-laptop kernel: [    0.000000] Allocated new RAMDISK: 008ad000 - 00ff929f
Mar 13 21:15:47 lilymage-laptop kernel: [    0.000000] Move RAMDISK from 00000000378a3000 - 0000000037fef29e to 008ad000 - 00ff929e
Mar 13 21:15:47 lilymage-laptop kernel: [    0.000000] ACPI: RSDP 000fc9b0 00014 (v00 DELL  )
Mar 13 21:15:47 lilymage-laptop kernel: [    0.000000] ACPI: RSDT 4f7d4425 00038 (v01 DELL    CPi R   27D50615 ASL  00000061)
Mar 13 21:15:47 lilymage-laptop kernel: [    0.000000] ACPI: FACP 4f7d4c00 00074 (v01 DELL    CPi R   27D50615 ASL  00000061)
Mar 13 21:15:47 lilymage-laptop kernel: [    0.000000] ACPI: DSDT 4f7d5800 02D9A (v01 INT430 SYSFexxx 00001001 MSFT 0100000E)
Mar 13 21:15:47 lilymage-laptop kernel: [    0.000000] ACPI: FACS 4f7e4000 00040
Mar 13 21:15:47 lilymage-laptop kernel: [    0.000000] ACPI: APIC 4f7d5400 00068 (v01 DELL    CPi R   27D50615 ASL  00000047)
Mar 13 21:15:47 lilymage-laptop kernel: [    0.000000] ACPI: MCFG 4f7d53c0 0003E (v16 DELL    CPi R   27D50615 ASL  00000061)
Mar 13 21:15:47 lilymage-laptop kernel: [    0.000000] ACPI: SSDT 4f7d4658 001D8 (v01  PmRef  Cpu0Cst 00003001 INTL 20030522)
Mar 13 21:15:47 lilymage-laptop kernel: [    0.000000] ACPI: SSDT 4f7d445d 001FB (v01  PmRef    CpuPm 00003000 INTL 20030522)
Mar 13 21:15:47 lilymage-laptop kernel: [    0.000000] 383MB HIGHMEM available.
Mar 13 21:15:47 lilymage-laptop kernel: [    0.000000] 887MB LOWMEM available.
Mar 13 21:15:47 lilymage-laptop kernel: [    0.000000]   mapped low ram: 0 - 377fe000
Mar 13 21:15:47 lilymage-laptop kernel: [    0.000000]   low ram: 0 - 377fe000
Mar 13 21:15:47 lilymage-laptop kernel: [    0.000000]   node 0 low ram: 00000000 - 377fe000
Mar 13 21:15:47 lilymage-laptop kernel: [    0.000000]   node 0 bootmap 00008000 - 0000ef00
Mar 13 21:15:47 lilymage-laptop kernel: [    0.000000] (9 early reservations) ==> bootmem [0000000000 - 00377fe000]
Mar 13 21:15:47 lilymage-laptop kernel: [    0.000000]   #0 [0000000000 - 0000001000]   BIOS data page ==> [0000000000 - 0000001000]
Mar 13 21:15:47 lilymage-laptop kernel: [    0.000000]   #1 [0000001000 - 0000002000]    EX TRAMPOLINE ==> [0000001000 - 0000002000]
Mar 13 21:15:47 lilymage-laptop kernel: [    0.000000]   #2 [0000006000 - 0000007000]       TRAMPOLINE ==> [0000006000 - 0000007000]
Mar 13 21:15:47 lilymage-laptop kernel: [    0.000000]   #3 [0000100000 - 00008a80a0]    TEXT DATA BSS ==> [0000100000 - 00008a80a0]
Mar 13 21:15:47 lilymage-laptop kernel: [    0.000000]   #4 [000009f000 - 0000100000]    BIOS reserved ==> [000009f000 - 0000100000]
Mar 13 21:15:47 lilymage-laptop kernel: [    0.000000]   #5 [00008a9000 - 00008ac188]              BRK ==> [00008a9000 - 00008ac188]
Mar 13 21:15:47 lilymage-laptop kernel: [    0.000000]   #6 [0000007000 - 0000008000]          PGTABLE ==> [0000007000 - 0000008000]
Mar 13 21:15:47 lilymage-laptop kernel: [    0.000000]   #7 [00008ad000 - 0000ff929f]      NEW RAMDISK ==> [00008ad000 - 0000ff929f]
Mar 13 21:15:47 lilymage-laptop kernel: [    0.000000]   #8 [0000008000 - 000000f000]          BOOTMAP ==> [0000008000 - 000000f000]
Mar 13 21:15:47 lilymage-laptop kernel: [    0.000000] Zone PFN ranges:
Mar 13 21:15:47 lilymage-laptop kernel: [    0.000000]   DMA      0x00000000 -> 0x00001000
Mar 13 21:15:47 lilymage-laptop kernel: [    0.000000]   Normal   0x00001000 -> 0x000377fe
Mar 13 21:15:47 lilymage-laptop kernel: [    0.000000]   HighMem  0x000377fe -> 0x0004f7d3
Mar 13 21:15:47 lilymage-laptop kernel: [    0.000000] Movable zone start PFN for each node
Mar 13 21:15:47 lilymage-laptop kernel: [    0.000000] early_node_map[3] active PFN ranges
Mar 13 21:15:47 lilymage-laptop kernel: [    0.000000]     0: 0x00000000 -> 0x00000002
Mar 13 21:15:47 lilymage-laptop kernel: [    0.000000]     0: 0x00000006 -> 0x0000009f
Mar 13 21:15:47 lilymage-laptop kernel: [    0.000000]     0: 0x00000100 -> 0x0004f7d3
Mar 13 21:15:47 lilymage-laptop kernel: [    0.000000] Using APIC driver default
Mar 13 21:15:47 lilymage-laptop kernel: [    0.000000] ACPI: PM-Timer IO Port: 0x1008
Mar 13 21:15:47 lilymage-laptop kernel: [    0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
Mar 13 21:15:47 lilymage-laptop kernel: [    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] disabled)
Mar 13 21:15:47 lilymage-laptop kernel: [    0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
Mar 13 21:15:47 lilymage-laptop kernel: [    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
Mar 13 21:15:47 lilymage-laptop kernel: [    0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
Mar 13 21:15:47 lilymage-laptop kernel: [    0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
Mar 13 21:15:47 lilymage-laptop kernel: [    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
Mar 13 21:15:47 lilymage-laptop kernel: [    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
Mar 13 21:15:47 lilymage-laptop kernel: [    0.000000] Enabling APIC mode:  Flat.  Using 1 I/O APICs
Mar 13 21:15:47 lilymage-laptop kernel: [    0.000000] Using ACPI (MADT) for SMP configuration information
Mar 13 21:15:47 lilymage-laptop kernel: [    0.000000] SMP: Allowing 2 CPUs, 1 hotplug CPUs
Mar 13 21:15:47 lilymage-laptop kernel: [    0.000000] PM: Registered nosave memory: 0000000000002000 - 0000000000006000
Mar 13 21:15:47 lilymage-laptop kernel: [    0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
Mar 13 21:15:47 lilymage-laptop kernel: [    0.000000] PM: Registered nosave memory: 00000000000a0000 - 0000000000100000
Mar 13 21:15:47 lilymage-laptop kernel: [    0.000000] Allocating PCI resources starting at 50000000 (gap: 50000000:90000000)
Mar 13 21:15:47 lilymage-laptop kernel: [    0.000000] NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2 nr_node_ids:1
Mar 13 21:15:47 lilymage-laptop kernel: [    0.000000] PERCPU: Embedded 14 pages at c19f5000, static data 35612 bytes
Mar 13 21:15:47 lilymage-laptop kernel: [    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 322942
Mar 13 21:15:47 lilymage-laptop kernel: [    0.000000] Kernel command line: root=UUID=ee4da522-875b-43c5-8f6c-0bcc74922aef ro quiet splash 
Mar 13 21:15:47 lilymage-laptop kernel: [    0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes)
Mar 13 21:15:47 lilymage-laptop kernel: [    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Mar 13 21:15:47 lilymage-laptop kernel: [    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Mar 13 21:15:47 lilymage-laptop kernel: [    0.000000] Enabling fast FPU save and restore... done.
Mar 13 21:15:47 lilymage-laptop kernel: [    0.000000] Enabling unmasked SIMD FPU exception support... done.
Mar 13 21:15:47 lilymage-laptop kernel: [    0.000000] Initializing CPU#0
Mar 13 21:15:47 lilymage-laptop kernel: [    0.000000] allocated 6511740 bytes of page_cgroup
Mar 13 21:15:47 lilymage-laptop kernel: [    0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
Mar 13 21:15:47 lilymage-laptop kernel: [    0.000000] Initializing HighMem for node 0 (000377fe:0004f7d3)
Mar 13 21:15:47 lilymage-laptop kernel: [    0.000000] Memory: 1268208k/1302348k available (4567k kernel code, 32824k reserved, 2141k data, 540k init, 393044k highmem)
Mar 13 21:15:47 lilymage-laptop kernel: [    0.000000] virtual kernel memory layout:
Mar 13 21:15:47 lilymage-laptop kernel: [    0.000000]     fixmap  : 0xfff1d000 - 0xfffff000   ( 904 kB)
Mar 13 21:15:47 lilymage-laptop kernel: [    0.000000]     pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
Mar 13 21:15:47 lilymage-laptop kernel: [    0.000000]     vmalloc : 0xf7ffe000 - 0xff7fe000   ( 120 MB)
Mar 13 21:15:47 lilymage-laptop kernel: [    0.000000]     lowmem  : 0xc0000000 - 0xf77fe000   ( 887 MB)
Mar 13 21:15:47 lilymage-laptop kernel: [    0.000000]       .init : 0xc078e000 - 0xc0815000   ( 540 kB)
Mar 13 21:15:47 lilymage-laptop kernel: [    0.000000]       .data : 0xc0575c48 - 0xc078d408   (2141 kB)
Mar 13 21:15:47 lilymage-laptop kernel: [    0.000000]       .text : 0xc0100000 - 0xc0575c48   (4567 kB)
Mar 13 21:15:47 lilymage-laptop kernel: [    0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
Mar 13 21:15:47 lilymage-laptop kernel: [    0.000000] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
Mar 13 21:15:47 lilymage-laptop kernel: [    0.000000] NR_IRQS:2304 nr_irqs:424
Mar 13 21:15:47 lilymage-laptop kernel: [    0.000000] Fast TSC calibration using PIT
Mar 13 21:15:47 lilymage-laptop kernel: [    0.000000] Detected 1396.426 MHz processor.
Mar 13 21:15:47 lilymage-laptop kernel: [    0.002074] Console: colour VGA+ 80x25
Mar 13 21:15:47 lilymage-laptop kernel: [    0.002080] console [tty0] enabled
Mar 13 21:15:47 lilymage-laptop kernel: [    0.004014] Calibrating delay loop (skipped), value calculated using timer frequency.. 2792.85 BogoMIPS (lpj=5585704)
Mar 13 21:15:47 lilymage-laptop kernel: [    0.004056] Security Framework initialized
Mar 13 21:15:47 lilymage-laptop kernel: [    0.004092] AppArmor: AppArmor initialized
Mar 13 21:15:47 lilymage-laptop kernel: [    0.004104] Mount-cache hash table entries: 512
Mar 13 21:15:47 lilymage-laptop kernel: [    0.004336] Initializing cgroup subsys ns
Mar 13 21:15:47 lilymage-laptop kernel: [    0.004344] Initializing cgroup subsys cpuacct
Mar 13 21:15:47 lilymage-laptop kernel: [    0.004350] Initializing cgroup subsys memory
Mar 13 21:15:47 lilymage-laptop kernel: [    0.004361] Initializing cgroup subsys freezer
Mar 13 21:15:47 lilymage-laptop kernel: [    0.004364] Initializing cgroup subsys net_cls
Mar 13 21:15:47 lilymage-laptop kernel: [    0.004389] CPU: L1 I cache: 32K, L1 D cache: 32K
Mar 13 21:15:47 lilymage-laptop kernel: [    0.004393] CPU: L2 cache: 1024K
Mar 13 21:15:47 lilymage-laptop kernel: [    0.004399] mce: CPU supports 5 MCE banks
Mar 13 21:15:47 lilymage-laptop kernel: [    0.004413] CPU0: Thermal monitoring enabled (TM1)
Mar 13 21:15:47 lilymage-laptop kernel: [    0.004428] Performance Counters: p6 PMU driver.
Mar 13 21:15:47 lilymage-laptop kernel: [    0.004439] ... version:                 0
Mar 13 21:15:47 lilymage-laptop kernel: [    0.004442] ... bit width:               32
Mar 13 21:15:47 lilymage-laptop kernel: [    0.004444] ... generic counters:        2
Mar 13 21:15:47 lilymage-laptop kernel: [    0.004447] ... value mask:              00000000ffffffff
Mar 13 21:15:47 lilymage-laptop kernel: [    0.004450] ... max period:              000000007fffffff
Mar 13 21:15:47 lilymage-laptop kernel: [    0.004454] ... fixed-purpose counters:  0
Mar 13 21:15:47 lilymage-laptop kernel: [    0.004456] ... counter mask:            0000000000000003
Mar 13 21:15:47 lilymage-laptop kernel: [    0.004463] Checking 'hlt' instruction... OK.
Mar 13 21:15:47 lilymage-laptop kernel: [    0.021127] SMP alternatives: switching to UP code
Mar 13 21:15:47 lilymage-laptop kernel: [    0.028008] ACPI: Core revision 20090521
Mar 13 21:15:47 lilymage-laptop kernel: [    0.039326] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
Mar 13 21:15:47 lilymage-laptop kernel: [    0.079018] CPU0: Intel(R) Celeron(R) M processor         1.40GHz stepping 08
Mar 13 21:15:47 lilymage-laptop kernel: [    0.080001] Brought up 1 CPUs
Mar 13 21:15:47 lilymage-laptop kernel: [    0.080001] Total of 1 processors activated (2792.85 BogoMIPS).
Mar 13 21:15:47 lilymage-laptop kernel: [    0.080001] Booting paravirtualized kernel on bare hardware
Mar 13 21:15:47 lilymage-laptop kernel: [    0.080001] regulator: core version 0.5
Mar 13 21:15:47 lilymage-laptop kernel: [    0.080001] Time: 20:15:12  Date: 03/13/10
Mar 13 21:15:47 lilymage-laptop kernel: [    0.080001] NET: Registered protocol family 16
Mar 13 21:15:47 lilymage-laptop kernel: [    0.080001] EISA bus registered
Mar 13 21:15:47 lilymage-laptop kernel: [    0.080001] ACPI: bus type pci registered
Mar 13 21:15:47 lilymage-laptop kernel: [    0.080001] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
Mar 13 21:15:47 lilymage-laptop kernel: [    0.080001] PCI: MCFG area at e0000000 reserved in E820
Mar 13 21:15:47 lilymage-laptop kernel: [    0.080001] PCI: Using MMCONFIG for extended config space
Mar 13 21:15:47 lilymage-laptop kernel: [    0.080001] PCI: Using configuration type 1 for base access
Mar 13 21:15:47 lilymage-laptop kernel: [    0.080001] bio: create slab <bio-0> at 0
Mar 13 21:15:47 lilymage-laptop kernel: [    0.085067] ACPI: Interpreter enabled
Mar 13 21:15:47 lilymage-laptop kernel: [    0.085076] ACPI: (supports S0 S3 S4 S5)
Mar 13 21:15:47 lilymage-laptop kernel: [    0.085105] ACPI: Using IOAPIC for interrupt routing
Mar 13 21:15:47 lilymage-laptop kernel: [    0.095553] ACPI: No dock devices found.
Mar 13 21:15:47 lilymage-laptop kernel: [    0.111589] ACPI: PCI Root Bridge [PCI0] (0000:00)
Mar 13 21:15:47 lilymage-laptop kernel: [    0.112251] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
Mar 13 21:15:47 lilymage-laptop kernel: [    0.112260] pci 0000:00:1d.7: PME# disabled
Mar 13 21:15:47 lilymage-laptop kernel: [    0.112450] pci 0000:00:1e.2: PME# supported from D0 D3hot D3cold
Mar 13 21:15:47 lilymage-laptop kernel: [    0.112456] pci 0000:00:1e.2: PME# disabled
Mar 13 21:15:47 lilymage-laptop kernel: [    0.112563] pci 0000:00:1e.3: PME# supported from D0 D3hot D3cold
Mar 13 21:15:47 lilymage-laptop kernel: [    0.112569] pci 0000:00:1e.3: PME# disabled
Mar 13 21:15:47 lilymage-laptop kernel: [    0.112677] pci 0000:00:1f.0: quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO
Mar 13 21:15:47 lilymage-laptop kernel: [    0.112683] pci 0000:00:1f.0: quirk: region 1080-10bf claimed by ICH6 GPIO
Mar 13 21:15:47 lilymage-laptop kernel: [    0.112689] pci 0000:00:1f.0: LPC Generic IO decode 1 PIO at 0900-097f
Mar 13 21:15:47 lilymage-laptop kernel: [    0.112979] pci 0000:02:01.0: PME# supported from D0 D1 D2 D3hot D3cold
Mar 13 21:15:47 lilymage-laptop kernel: [    0.112986] pci 0000:02:01.0: PME# disabled
Mar 13 21:15:47 lilymage-laptop kernel: [    0.113118] pci 0000:02:08.0: PME# supported from D0 D1 D2 D3hot D3cold
Mar 13 21:15:47 lilymage-laptop kernel: [    0.113124] pci 0000:02:08.0: PME# disabled
Mar 13 21:15:47 lilymage-laptop kernel: [    0.113178] pci 0000:00:1e.0: transparent bridge
Mar 13 21:15:47 lilymage-laptop kernel: [    0.126378] ACPI: PCI Interrupt Link [LNKA] (IRQs 9 10 *11)
Mar 13 21:15:47 lilymage-laptop kernel: [    0.126538] ACPI: PCI Interrupt Link [LNKB] (IRQs 5 7) *10
Mar 13 21:15:47 lilymage-laptop kernel: [    0.126692] ACPI: PCI Interrupt Link [LNKC] (IRQs *9 10 11)
Mar 13 21:15:47 lilymage-laptop kernel: [    0.126846] ACPI: PCI Interrupt Link [LNKD] (IRQs *5 7 9 10 11)
Mar 13 21:15:47 lilymage-laptop kernel: [    0.127000] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 *4 5 6 7 9 10 11 12 14 15)
Mar 13 21:15:47 lilymage-laptop kernel: [    0.127136] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
Mar 13 21:15:47 lilymage-laptop kernel: [    0.127268] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
Mar 13 21:15:47 lilymage-laptop kernel: [    0.127552] SCSI subsystem initialized
Mar 13 21:15:47 lilymage-laptop kernel: [    0.127727] usbcore: registered new interface driver usbfs
Mar 13 21:15:47 lilymage-laptop kernel: [    0.127751] usbcore: registered new interface driver hub
Mar 13 21:15:47 lilymage-laptop kernel: [    0.127786] usbcore: registered new device driver usb
Mar 13 21:15:47 lilymage-laptop kernel: [    0.127973] ACPI: WMI: Mapper loaded
Mar 13 21:15:47 lilymage-laptop kernel: [    0.127976] PCI: Using ACPI for IRQ routing
Mar 13 21:15:47 lilymage-laptop kernel: [    0.128181] Bluetooth: Core ver 2.15
Mar 13 21:15:47 lilymage-laptop kernel: [    0.128220] NET: Registered protocol family 31
Mar 13 21:15:47 lilymage-laptop kernel: [    0.128222] Bluetooth: HCI device and connection manager initialized
Mar 13 21:15:47 lilymage-laptop kernel: [    0.128227] Bluetooth: HCI socket layer initialized
Mar 13 21:15:47 lilymage-laptop kernel: [    0.128230] NetLabel: Initializing
Mar 13 21:15:47 lilymage-laptop kernel: [    0.128232] NetLabel:  domain hash size = 128
Mar 13 21:15:47 lilymage-laptop kernel: [    0.128234] NetLabel:  protocols = UNLABELED CIPSOv4
Mar 13 21:15:47 lilymage-laptop kernel: [    0.128253] NetLabel:  unlabeled traffic allowed by default
Mar 13 21:15:47 lilymage-laptop kernel: [    0.128464] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
Mar 13 21:15:47 lilymage-laptop kernel: [    0.128473] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
Mar 13 21:15:47 lilymage-laptop kernel: [    0.128480] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
Mar 13 21:15:47 lilymage-laptop kernel: [    0.134544] pnp: PnP ACPI init
Mar 13 21:15:47 lilymage-laptop kernel: [    0.134579] ACPI: bus type pnp registered
Mar 13 21:15:47 lilymage-laptop kernel: [    0.170023] pnp 00:02: io resource (0x1000-0x1005) overlaps 0000:00:1f.0 BAR 13 (0x1000-0x107f), disabling
Mar 13 21:15:47 lilymage-laptop kernel: [    0.170030] pnp 00:02: io resource (0x1008-0x100f) overlaps 0000:00:1f.0 BAR 13 (0x1000-0x107f), disabling
Mar 13 21:15:47 lilymage-laptop kernel: [    0.170122] pnp 00:03: io resource (0x1006-0x1007) overlaps 0000:00:1f.0 BAR 13 (0x1000-0x107f), disabling
Mar 13 21:15:47 lilymage-laptop kernel: [    0.170128] pnp 00:03: io resource (0x100a-0x1059) overlaps 0000:00:1f.0 BAR 13 (0x1000-0x107f), disabling
Mar 13 21:15:47 lilymage-laptop kernel: [    0.170133] pnp 00:03: io resource (0x1060-0x107f) overlaps 0000:00:1f.0 BAR 13 (0x1000-0x107f), disabling
Mar 13 21:15:47 lilymage-laptop kernel: [    0.171722] pnp 00:0b: io resource (0xd3b0-0xd3bb) overlaps 0000:00:1e.0 BAR 13 (0xd000-0xdfff), disabling
Mar 13 21:15:47 lilymage-laptop kernel: [    0.171729] pnp 00:0b: io resource (0xd3c0-0xd3df) overlaps 0000:00:1e.0 BAR 13 (0xd000-0xdfff), disabling
Mar 13 21:15:47 lilymage-laptop kernel: [    0.171734] pnp 00:0b: io resource (0xd7b0-0xd7bb) overlaps 0000:00:1e.0 BAR 13 (0xd000-0xdfff), disabling
Mar 13 21:15:47 lilymage-laptop kernel: [    0.171740] pnp 00:0b: io resource (0xd7c0-0xd7df) overlaps 0000:00:1e.0 BAR 13 (0xd000-0xdfff), disabling
Mar 13 21:15:47 lilymage-laptop kernel: [    0.171746] pnp 00:0b: io resource (0xdbb0-0xdbbb) overlaps 0000:00:1e.0 BAR 13 (0xd000-0xdfff), disabling
Mar 13 21:15:47 lilymage-laptop kernel: [    0.171751] pnp 00:0b: io resource (0xdbc0-0xdbdf) overlaps 0000:00:1e.0 BAR 13 (0xd000-0xdfff), disabling
Mar 13 21:15:47 lilymage-laptop kernel: [    0.171757] pnp 00:0b: io resource (0xdfb0-0xdfbb) overlaps 0000:00:1e.0 BAR 13 (0xd000-0xdfff), disabling
Mar 13 21:15:47 lilymage-laptop kernel: [    0.171763] pnp 00:0b: io resource (0xdfc0-0xdfdf) overlaps 0000:00:1e.0 BAR 13 (0xd000-0xdfff), disabling
Mar 13 21:15:47 lilymage-laptop kernel: [    0.172328] pnp: PnP ACPI: found 12 devices
Mar 13 21:15:47 lilymage-laptop kernel: [    0.172331] ACPI: ACPI bus type pnp unregistered
Mar 13 21:15:47 lilymage-laptop kernel: [    0.172338] PnPBIOS: Disabled by ACPI PNP
Mar 13 21:15:47 lilymage-laptop kernel: [    0.172354] system 00:00: iomem range 0x0-0x9fbff could not be reserved
Mar 13 21:15:47 lilymage-laptop kernel: [    0.172359] system 00:00: iomem range 0x9fc00-0x9ffff could not be reserved
Mar 13 21:15:47 lilymage-laptop kernel: [    0.172364] system 00:00: iomem range 0xc0000-0xcffff could not be reserved
Mar 13 21:15:47 lilymage-laptop kernel: [    0.172368] system 00:00: iomem range 0xe0000-0xfffff could not be reserved
Mar 13 21:15:47 lilymage-laptop kernel: [    0.172373] system 00:00: iomem range 0x100000-0x4f7d37ff could not be reserved
Mar 13 21:15:47 lilymage-laptop kernel: [    0.172378] system 00:00: iomem range 0x4f7d3800-0x4f7fffff has been reserved
Mar 13 21:15:47 lilymage-laptop kernel: [    0.172382] system 00:00: iomem range 0x4f800000-0x4fffffff has been reserved
Mar 13 21:15:47 lilymage-laptop kernel: [    0.172387] system 00:00: iomem range 0xfeda0000-0xfedfffff has been reserved
Mar 13 21:15:47 lilymage-laptop kernel: [    0.172392] system 00:00: iomem range 0xffb00000-0xffffffff has been reserved
Mar 13 21:15:47 lilymage-laptop kernel: [    0.172396] system 00:00: iomem range 0xfec00000-0xfec0ffff could not be reserved
Mar 13 21:15:47 lilymage-laptop kernel: [    0.172401] system 00:00: iomem range 0xfee00000-0xfee0ffff has been reserved
Mar 13 21:15:47 lilymage-laptop kernel: [    0.172406] system 00:00: iomem range 0xfed20000-0xfed9ffff has been reserved
Mar 13 21:15:47 lilymage-laptop kernel: [    0.172410] system 00:00: iomem range 0xf0000000-0xf0003fff has been reserved
Mar 13 21:15:47 lilymage-laptop kernel: [    0.172415] system 00:00: iomem range 0xf0004000-0xf0004fff has been reserved
Mar 13 21:15:47 lilymage-laptop kernel: [    0.172419] system 00:00: iomem range 0xf0005000-0xf0005fff has been reserved
Mar 13 21:15:47 lilymage-laptop kernel: [    0.172424] system 00:00: iomem range 0xf0006000-0xf0006fff has been reserved
Mar 13 21:15:47 lilymage-laptop kernel: [    0.172428] system 00:00: iomem range 0xf0008000-0xf000bfff has been reserved
Mar 13 21:15:47 lilymage-laptop kernel: [    0.172433] system 00:00: iomem range 0xe0000000-0xefffffff has been reserved
Mar 13 21:15:47 lilymage-laptop kernel: [    0.172443] system 00:02: ioport range 0x4d0-0x4d1 has been reserved
Mar 13 21:15:47 lilymage-laptop kernel: [    0.172451] system 00:03: ioport range 0xf400-0xf4fe has been reserved
Mar 13 21:15:47 lilymage-laptop kernel: [    0.172455] system 00:03: ioport range 0x1080-0x10bf has been reserved
Mar 13 21:15:47 lilymage-laptop kernel: [    0.172460] system 00:03: ioport range 0x10c0-0x10df has been reserved
Mar 13 21:15:47 lilymage-laptop kernel: [    0.172464] system 00:03: ioport range 0x10e0-0x10ff has been reserved
Mar 13 21:15:47 lilymage-laptop kernel: [    0.172473] system 00:08: ioport range 0x900-0x90f has been reserved
Mar 13 21:15:47 lilymage-laptop kernel: [    0.172478] system 00:08: ioport range 0x910-0x91f has been reserved
Mar 13 21:15:47 lilymage-laptop kernel: [    0.172482] system 00:08: ioport range 0x920-0x92f has been reserved
Mar 13 21:15:47 lilymage-laptop kernel: [    0.172486] system 00:08: ioport range 0x930-0x93f has been reserved
Mar 13 21:15:47 lilymage-laptop kernel: [    0.172490] system 00:08: ioport range 0x940-0x97f has been reserved
Mar 13 21:15:47 lilymage-laptop kernel: [    0.172499] system 00:0b: ioport range 0x7b0-0x7bb has been reserved
Mar 13 21:15:47 lilymage-laptop kernel: [    0.172503] system 00:0b: ioport range 0x7c0-0x7df has been reserved
Mar 13 21:15:47 lilymage-laptop kernel: [    0.172507] system 00:0b: ioport range 0xbb0-0xbbb has been reserved
Mar 13 21:15:47 lilymage-laptop kernel: [    0.172512] system 00:0b: ioport range 0xbc0-0xbdf has been reserved
Mar 13 21:15:47 lilymage-laptop kernel: [    0.172516] system 00:0b: ioport range 0xfb0-0xfbb has been reserved
Mar 13 21:15:47 lilymage-laptop kernel: [    0.172520] system 00:0b: ioport range 0xfc0-0xfdf has been reserved
Mar 13 21:15:47 lilymage-laptop kernel: [    0.172525] system 00:0b: ioport range 0x13b0-0x13bb has been reserved
Mar 13 21:15:47 lilymage-laptop kernel: [    0.172529] system 00:0b: ioport range 0x13c0-0x13df has been reserved
Mar 13 21:15:47 lilymage-laptop kernel: [    0.172533] system 00:0b: ioport range 0x17b0-0x17bb has been reserved
Mar 13 21:15:47 lilymage-laptop kernel: [    0.172538] system 00:0b: ioport range 0x17c0-0x17df has been reserved
Mar 13 21:15:47 lilymage-laptop kernel: [    0.172542] system 00:0b: ioport range 0x1bb0-0x1bbb has been reserved
Mar 13 21:15:47 lilymage-laptop kernel: [    0.172547] system 00:0b: ioport range 0x1bc0-0x1bdf has been reserved
Mar 13 21:15:47 lilymage-laptop kernel: [    0.172551] system 00:0b: ioport range 0x1fb0-0x1fbb has been reserved
Mar 13 21:15:47 lilymage-laptop kernel: [    0.172555] system 00:0b: ioport range 0x1fc0-0x1fdf has been reserved
Mar 13 21:15:47 lilymage-laptop kernel: [    0.172560] system 00:0b: ioport range 0x23b0-0x23bb has been reserved
Mar 13 21:15:47 lilymage-laptop kernel: [    0.172564] system 00:0b: ioport range 0x23c0-0x23df has been reserved
Mar 13 21:15:47 lilymage-laptop kernel: [    0.172569] system 00:0b: ioport range 0x27b0-0x27bb has been reserved
Mar 13 21:15:47 lilymage-laptop kernel: [    0.172573] system 00:0b: ioport range 0x27c0-0x27df has been reserved
Mar 13 21:15:47 lilymage-laptop kernel: [    0.172578] system 00:0b: ioport range 0x2bb0-0x2bbb has been reserved
Mar 13 21:15:47 lilymage-laptop kernel: [    0.172582] system 00:0b: ioport range 0x2bc0-0x2bdf has been reserved
Mar 13 21:15:47 lilymage-laptop kernel: [    0.172586] system 00:0b: ioport range 0x2fb0-0x2fbb has been reserved
Mar 13 21:15:47 lilymage-laptop kernel: [    0.172591] system 00:0b: ioport range 0x2fc0-0x2fdf has been reserved
Mar 13 21:15:47 lilymage-laptop kernel: [    0.172595] system 00:0b: ioport range 0x33b0-0x33bb has been reserved
Mar 13 21:15:47 lilymage-laptop kernel: [    0.172600] system 00:0b: ioport range 0x33c0-0x33df has been reserved
Mar 13 21:15:47 lilymage-laptop kernel: [    0.172604] system 00:0b: ioport range 0x37b0-0x37bb has been reserved
Mar 13 21:15:47 lilymage-laptop kernel: [    0.172609] system 00:0b: ioport range 0x37c0-0x37df has been reserved
Mar 13 21:15:47 lilymage-laptop kernel: [    0.172613] system 00:0b: ioport range 0x3bb0-0x3bbb has been reserved
Mar 13 21:15:47 lilymage-laptop kernel: [    0.172618] system 00:0b: ioport range 0x3bc0-0x3bdf has been reserved
Mar 13 21:15:47 lilymage-laptop kernel: [    0.172622] system 00:0b: ioport range 0x3fb0-0x3fbb has been reserved
Mar 13 21:15:47 lilymage-laptop kernel: [    0.172627] system 00:0b: ioport range 0x3fc0-0x3fdf has been reserved
Mar 13 21:15:47 lilymage-laptop kernel: [    0.172632] system 00:0b: ioport range 0x43b0-0x43bb has been reserved
Mar 13 21:15:47 lilymage-laptop kernel: [    0.172636] system 00:0b: ioport range 0x43c0-0x43df has been reserved
Mar 13 21:15:47 lilymage-laptop kernel: [    0.172641] system 00:0b: ioport range 0x47b0-0x47bb has been reserved
Mar 13 21:15:47 lilymage-laptop kernel: [    0.172645] system 00:0b: ioport range 0x47c0-0x47df has been reserved
Mar 13 21:15:47 lilymage-laptop kernel: [    0.172650] system 00:0b: ioport range 0x4bb0-0x4bbb has been reserved
Mar 13 21:15:47 lilymage-laptop kernel: [    0.172654] system 00:0b: ioport range 0x4bc0-0x4bdf has been reserved
Mar 13 21:15:47 lilymage-laptop kernel: [    0.172659] system 00:0b: ioport range 0x4fb0-0x4fbb has been reserved
Mar 13 21:15:47 lilymage-laptop kernel: [    0.172664] system 00:0b: ioport range 0x4fc0-0x4fdf has been reserved
Mar 13 21:15:47 lilymage-laptop kernel: [    0.172668] system 00:0b: ioport range 0x53b0-0x53bb has been reserved
Mar 13 21:15:47 lilymage-laptop kernel: [    0.172673] system 00:0b: ioport range 0x53c0-0x53df has been reserved
Mar 13 21:15:47 lilymage-laptop kernel: [    0.172677] system 00:0b: ioport range 0x57b0-0x57bb has been reserved
Mar 13 21:15:47 lilymage-laptop kernel: [    0.172682] system 00:0b: ioport range 0x57c0-0x57df has been reserved
Mar 13 21:15:47 lilymage-laptop kernel: [    0.172687] system 00:0b: ioport range 0x5bb0-0x5bbb has been reserved
Mar 13 21:15:47 lilymage-laptop kernel: [    0.172691] system 00:0b: ioport range 0x5bc0-0x5bdf has been reserved
Mar 13 21:15:47 lilymage-laptop kernel: [    0.172696] system 00:0b: ioport range 0x5fb0-0x5fbb has been reserved
Mar 13 21:15:47 lilymage-laptop kernel: [    0.172701] system 00:0b: ioport range 0x5fc0-0x5fdf has been reserved
Mar 13 21:15:47 lilymage-laptop kernel: [    0.172705] system 00:0b: ioport range 0x63b0-0x63bb has been reserved
Mar 13 21:15:47 lilymage-laptop kernel: [    0.172710] system 00:0b: ioport range 0x63c0-0x63df has been reserved
Mar 13 21:15:47 lilymage-laptop kernel: [    0.172715] system 00:0b: ioport range 0x67b0-0x67bb has been reserved
Mar 13 21:15:47 lilymage-laptop kernel: [    0.172719] system 00:0b: ioport range 0x67c0-0x67df has been reserved
Mar 13 21:15:47 lilymage-laptop kernel: [    0.172724] system 00:0b: ioport range 0x6bb0-0x6bbb has been reserved
Mar 13 21:15:47 lilymage-laptop kernel: [    0.172729] system 00:0b: ioport range 0x6bc0-0x6bdf has been reserved
Mar 13 21:15:47 lilymage-laptop kernel: [    0.172733] system 00:0b: ioport range 0x6fb0-0x6fbb has been reserved
Mar 13 21:15:47 lilymage-laptop kernel: [    0.172738] system 00:0b: ioport range 0x6fc0-0x6fdf has been reserved
Mar 13 21:15:47 lilymage-laptop kernel: [    0.172743] system 00:0b: ioport range 0x73b0-0x73bb has been reserved
Mar 13 21:15:47 lilymage-laptop kernel: [    0.172748] system 00:0b: ioport range 0x73c0-0x73df has been reserved
Mar 13 21:15:47 lilymage-laptop kernel: [    0.172752] system 00:0b: ioport range 0x77b0-0x77bb has been reserved
Mar 13 21:15:47 lilymage-laptop kernel: [    0.172757] system 00:0b: ioport range 0x77c0-0x77df has been reserved
Mar 13 21:15:47 lilymage-laptop kernel: [    0.172762] system 00:0b: ioport range 0x7bb0-0x7bbb has been reserved
Mar 13 21:15:47 lilymage-laptop kernel: [    0.172767] system 00:0b: ioport range 0x7bc0-0x7bdf has been reserved
Mar 13 21:15:47 lilymage-laptop kernel: [    0.172771] system 00:0b: ioport range 0x7fb0-0x7fbb has been reserved
Mar 13 21:15:47 lilymage-laptop kernel: [    0.172776] system 00:0b: ioport range 0x7fc0-0x7fdf has been reserved
Mar 13 21:15:47 lilymage-laptop kernel: [    0.172781] system 00:0b: ioport range 0x83b0-0x83bb has been reserved
Mar 13 21:15:47 lilymage-laptop kernel: [    0.172786] system 00:0b: ioport range 0x83c0-0x83df has been reserved
Mar 13 21:15:47 lilymage-laptop kernel: [    0.172791] system 00:0b: ioport range 0x87b0-0x87bb has been reserved
Mar 13 21:15:47 lilymage-laptop kernel: [    0.172795] system 00:0b: ioport range 0x87c0-0x87df has been reserved
Mar 13 21:15:47 lilymage-laptop kernel: [    0.172800] system 00:0b: ioport range 0x8bb0-0x8bbb has been reserved
Mar 13 21:15:47 lilymage-laptop kernel: [    0.172805] system 00:0b: ioport range 0x8bc0-0x8bdf has been reserved
Mar 13 21:15:47 lilymage-laptop kernel: [    0.172810] system 00:0b: ioport range 0x8fb0-0x8fbb has been reserved
Mar 13 21:15:47 lilymage-laptop kernel: [    0.172815] system 00:0b: ioport range 0x8fc0-0x8fdf has been reserved
Mar 13 21:15:47 lilymage-laptop kernel: [    0.172820] system 00:0b: ioport range 0x93b0-0x93bb has been reserved
Mar 13 21:15:47 lilymage-laptop kernel: [    0.172824] system 00:0b: ioport range 0x93c0-0x93df has been reserved
Mar 13 21:15:47 lilymage-laptop kernel: [    0.172829] system 00:0b: ioport range 0x97b0-0x97bb has been reserved
Mar 13 21:15:47 lilymage-laptop kernel: [    0.172834] system 00:0b: ioport range 0x97c0-0x97df has been reserved
Mar 13 21:15:47 lilymage-laptop kernel: [    0.172839] system 00:0b: ioport range 0x9bb0-0x9bbb has been reserved

Lilymage · Le 13/03/2010, à 22:23

2ème partie:

Mar 13 21:15:47 lilymage-laptop kernel: [    0.172844] system 00:0b: ioport range 0x9bc0-0x9bdf has been reserved
Mar 13 21:15:47 lilymage-laptop kernel: [    0.172849] system 00:0b: ioport range 0x9fb0-0x9fbb has been reserved
Mar 13 21:15:47 lilymage-laptop kernel: [    0.172854] system 00:0b: ioport range 0x9fc0-0x9fdf has been reserved
Mar 13 21:15:47 lilymage-laptop kernel: [    0.172859] system 00:0b: ioport range 0xa3b0-0xa3bb has been reserved
Mar 13 21:15:47 lilymage-laptop kernel: [    0.172864] system 00:0b: ioport range 0xa3c0-0xa3df has been reserved
Mar 13 21:15:47 lilymage-laptop kernel: [    0.172869] system 00:0b: ioport range 0xa7b0-0xa7bb has been reserved
Mar 13 21:15:47 lilymage-laptop kernel: [    0.172873] system 00:0b: ioport range 0xa7c0-0xa7df has been reserved
Mar 13 21:15:47 lilymage-laptop kernel: [    0.172878] system 00:0b: ioport range 0xabb0-0xabbb has been reserved
Mar 13 21:15:47 lilymage-laptop kernel: [    0.172883] system 00:0b: ioport range 0xabc0-0xabdf has been reserved
Mar 13 21:15:47 lilymage-laptop kernel: [    0.172888] system 00:0b: ioport range 0xafb0-0xafbb has been reserved
Mar 13 21:15:47 lilymage-laptop kernel: [    0.172899] system 00:0b: ioport range 0xafc0-0xafdf has been reserved
Mar 13 21:15:47 lilymage-laptop kernel: [    0.172904] system 00:0b: ioport range 0xb3b0-0xb3bb has been reserved
Mar 13 21:15:47 lilymage-laptop kernel: [    0.172909] system 00:0b: ioport range 0xb3c0-0xb3df has been reserved
Mar 13 21:15:47 lilymage-laptop kernel: [    0.172914] system 00:0b: ioport range 0xb7b0-0xb7bb has been reserved
Mar 13 21:15:47 lilymage-laptop kernel: [    0.172919] system 00:0b: ioport range 0xb7c0-0xb7df has been reserved
Mar 13 21:15:47 lilymage-laptop kernel: [    0.172924] system 00:0b: ioport range 0xbbb0-0xbbbb has been reserved
Mar 13 21:15:47 lilymage-laptop kernel: [    0.172929] system 00:0b: ioport range 0xbbc0-0xbbdf has been reserved
Mar 13 21:15:47 lilymage-laptop kernel: [    0.172934] system 00:0b: ioport range 0xbfb0-0xbfbb has been reserved
Mar 13 21:15:47 lilymage-laptop kernel: [    0.172939] system 00:0b: ioport range 0xbfc0-0xbfdf has been reserved
Mar 13 21:15:47 lilymage-laptop kernel: [    0.172944] system 00:0b: ioport range 0xc3b0-0xc3bb has been reserved
Mar 13 21:15:47 lilymage-laptop kernel: [    0.172949] system 00:0b: ioport range 0xc3c0-0xc3df has been reserved
Mar 13 21:15:47 lilymage-laptop kernel: [    0.172954] system 00:0b: ioport range 0xc7b0-0xc7bb has been reserved
Mar 13 21:15:47 lilymage-laptop kernel: [    0.172959] system 00:0b: ioport range 0xc7c0-0xc7df has been reserved
Mar 13 21:15:47 lilymage-laptop kernel: [    0.172964] system 00:0b: ioport range 0xcbb0-0xcbbb has been reserved
Mar 13 21:15:47 lilymage-laptop kernel: [    0.172969] system 00:0b: ioport range 0xcbc0-0xcbdf has been reserved
Mar 13 21:15:47 lilymage-laptop kernel: [    0.172974] system 00:0b: ioport range 0xcfb0-0xcfbb has been reserved
Mar 13 21:15:47 lilymage-laptop kernel: [    0.172979] system 00:0b: ioport range 0xcfc0-0xcfdf has been reserved
Mar 13 21:15:47 lilymage-laptop kernel: [    0.172988] system 00:0b: ioport range 0xe3b0-0xe3bb has been reserved
Mar 13 21:15:47 lilymage-laptop kernel: [    0.172994] system 00:0b: ioport range 0xe3c0-0xe3df has been reserved
Mar 13 21:15:47 lilymage-laptop kernel: [    0.172999] system 00:0b: ioport range 0xe7b0-0xe7bb has been reserved
Mar 13 21:15:47 lilymage-laptop kernel: [    0.173004] system 00:0b: ioport range 0xe7c0-0xe7df has been reserved
Mar 13 21:15:47 lilymage-laptop kernel: [    0.173009] system 00:0b: ioport range 0xebb0-0xebbb has been reserved
Mar 13 21:15:47 lilymage-laptop kernel: [    0.173014] system 00:0b: ioport range 0xebc0-0xebdf has been reserved
Mar 13 21:15:47 lilymage-laptop kernel: [    0.173020] system 00:0b: ioport range 0xefb0-0xefbb has been reserved
Mar 13 21:15:47 lilymage-laptop kernel: [    0.173025] system 00:0b: ioport range 0xefc0-0xefdf has been reserved
Mar 13 21:15:47 lilymage-laptop kernel: [    0.173030] system 00:0b: ioport range 0xf3b0-0xf3bb has been reserved
Mar 13 21:15:47 lilymage-laptop kernel: [    0.173035] system 00:0b: ioport range 0xf3c0-0xf3df has been reserved
Mar 13 21:15:47 lilymage-laptop kernel: [    0.173040] system 00:0b: ioport range 0xf7b0-0xf7bb has been reserved
Mar 13 21:15:47 lilymage-laptop kernel: [    0.173046] system 00:0b: ioport range 0xf7c0-0xf7df has been reserved
Mar 13 21:15:47 lilymage-laptop kernel: [    0.173051] system 00:0b: ioport range 0xfbb0-0xfbbb has been reserved
Mar 13 21:15:47 lilymage-laptop kernel: [    0.173056] system 00:0b: ioport range 0xfbc0-0xfbdf has been reserved
Mar 13 21:15:47 lilymage-laptop kernel: [    0.173062] system 00:0b: ioport range 0xffb0-0xffbb has been reserved
Mar 13 21:15:47 lilymage-laptop kernel: [    0.173067] system 00:0b: ioport range 0xffc0-0xffdf has been reserved
Mar 13 21:15:47 lilymage-laptop kernel: [    0.207816] AppArmor: AppArmor Filesystem Enabled
Mar 13 21:15:47 lilymage-laptop kernel: [    0.207864] pci 0000:02:01.0: CardBus bridge, secondary bus 0000:03
Mar 13 21:15:47 lilymage-laptop kernel: [    0.207868] pci 0000:02:01.0:   IO window: 0x00d000-0x00d0ff
Mar 13 21:15:47 lilymage-laptop kernel: [    0.207876] pci 0000:02:01.0:   IO window: 0x00d400-0x00d4ff
Mar 13 21:15:47 lilymage-laptop kernel: [    0.207883] pci 0000:02:01.0:   PREFETCH window: 0x50000000-0x53ffffff
Mar 13 21:15:47 lilymage-laptop kernel: [    0.207891] pci 0000:02:01.0:   MEM window: 0x54000000-0x57ffffff
Mar 13 21:15:47 lilymage-laptop kernel: [    0.207899] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:02
Mar 13 21:15:47 lilymage-laptop kernel: [    0.207904] pci 0000:00:1e.0:   IO window: 0xd000-0xdfff
Mar 13 21:15:47 lilymage-laptop kernel: [    0.207912] pci 0000:00:1e.0:   MEM window: 0xdfd00000-0xdfdfffff
Mar 13 21:15:47 lilymage-laptop kernel: [    0.207919] pci 0000:00:1e.0:   PREFETCH window: 0x50000000-0x53ffffff
Mar 13 21:15:47 lilymage-laptop kernel: [    0.207955] pci 0000:02:01.0: enabling device (0000 -> 0003)
Mar 13 21:15:47 lilymage-laptop kernel: [    0.207980] pci 0000:02:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
Mar 13 21:15:47 lilymage-laptop kernel: [    0.208086] NET: Registered protocol family 2
Mar 13 21:15:47 lilymage-laptop kernel: [    0.208226] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
Mar 13 21:15:47 lilymage-laptop kernel: [    0.208667] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
Mar 13 21:15:47 lilymage-laptop kernel: [    0.210082] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
Mar 13 21:15:47 lilymage-laptop kernel: [    0.210963] TCP: Hash tables configured (established 131072 bind 65536)
Mar 13 21:15:47 lilymage-laptop kernel: [    0.210968] TCP reno registered
Mar 13 21:15:47 lilymage-laptop kernel: [    0.211166] NET: Registered protocol family 1
Mar 13 21:15:47 lilymage-laptop kernel: [    0.211282] Trying to unpack rootfs image as initramfs...
Mar 13 21:15:47 lilymage-laptop kernel: [    0.511235] Freeing initrd memory: 7472k freed
Mar 13 21:15:47 lilymage-laptop kernel: [    0.519627] cpufreq-nforce2: No nForce2 chipset.
Mar 13 21:15:47 lilymage-laptop kernel: [    0.519691] Scanning for low memory corruption every 60 seconds
Mar 13 21:15:47 lilymage-laptop kernel: [    0.519876] audit: initializing netlink socket (disabled)
Mar 13 21:15:47 lilymage-laptop kernel: [    0.519906] type=2000 audit(1268511311.515:1): initialized
Mar 13 21:15:47 lilymage-laptop kernel: [    0.532616] highmem bounce pool size: 64 pages
Mar 13 21:15:47 lilymage-laptop kernel: [    0.532627] HugeTLB registered 4 MB page size, pre-allocated 0 pages
Mar 13 21:15:47 lilymage-laptop kernel: [    0.534648] VFS: Disk quotas dquot_6.5.2
Mar 13 21:15:47 lilymage-laptop kernel: [    0.534729] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
Mar 13 21:15:47 lilymage-laptop kernel: [    0.535493] fuse init (API version 7.12)
Mar 13 21:15:47 lilymage-laptop kernel: [    0.535610] msgmni has been set to 1725
Mar 13 21:15:47 lilymage-laptop kernel: [    0.535891] alg: No test for stdrng (krng)
Mar 13 21:15:47 lilymage-laptop kernel: [    0.535908] io scheduler noop registered
Mar 13 21:15:47 lilymage-laptop kernel: [    0.535911] io scheduler anticipatory registered
Mar 13 21:15:47 lilymage-laptop kernel: [    0.535914] io scheduler deadline registered
Mar 13 21:15:47 lilymage-laptop kernel: [    0.535991] io scheduler cfq registered (default)
Mar 13 21:15:47 lilymage-laptop kernel: [    0.536137] pci 0000:02:08.0: Firmware left e100 interrupts enabled; disabling
Mar 13 21:15:47 lilymage-laptop kernel: [    0.536239] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
Mar 13 21:15:47 lilymage-laptop kernel: [    0.536276] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
Mar 13 21:15:47 lilymage-laptop kernel: [    0.536963] ACPI: AC Adapter [AC] (on-line)
Mar 13 21:15:47 lilymage-laptop kernel: [    0.537092] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input0
Mar 13 21:15:47 lilymage-laptop kernel: [    0.537644] ACPI: Lid Switch [LID]
Mar 13 21:15:47 lilymage-laptop kernel: [    0.537713] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
Mar 13 21:15:47 lilymage-laptop kernel: [    0.537721] ACPI: Power Button [PBTN]
Mar 13 21:15:47 lilymage-laptop kernel: [    0.537786] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input2
Mar 13 21:15:47 lilymage-laptop kernel: [    0.537790] ACPI: Sleep Button [SBTN]
Mar 13 21:15:47 lilymage-laptop kernel: [    0.538318] Marking TSC unstable due to TSC halts in idle
Mar 13 21:15:47 lilymage-laptop kernel: [    0.538352] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
Mar 13 21:15:47 lilymage-laptop kernel: [    0.538388] processor LNXCPU:00: registered as cooling_device0
Mar 13 21:15:47 lilymage-laptop kernel: [    0.538393] ACPI: Processor [CPU0] (supports 8 throttling states)
Mar 13 21:15:47 lilymage-laptop kernel: [    0.544666] thermal LNXTHERM:01: registered as thermal_zone0
Mar 13 21:15:47 lilymage-laptop kernel: [    0.544677] ACPI: Thermal Zone [THM] (70 C)
Mar 13 21:15:47 lilymage-laptop kernel: [    0.544740] isapnp: Scanning for PnP cards...
Mar 13 21:15:47 lilymage-laptop kernel: [    0.841736] ACPI: Battery Slot [BAT0] (battery present)
Mar 13 21:15:47 lilymage-laptop kernel: [    0.928806] isapnp: No Plug & Play device found
Mar 13 21:15:47 lilymage-laptop kernel: [    0.930288] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
Mar 13 21:15:47 lilymage-laptop kernel: [    0.930816] serial 0000:00:1e.3: PCI INT B -> GSI 17 (level, low) -> IRQ 17
Mar 13 21:15:47 lilymage-laptop kernel: [    0.930824] serial 0000:00:1e.3: PCI INT B disabled
Mar 13 21:15:47 lilymage-laptop kernel: [    0.932126] brd: module loaded
Mar 13 21:15:47 lilymage-laptop kernel: [    0.932761] loop: module loaded
Mar 13 21:15:47 lilymage-laptop kernel: [    0.932877] input: Macintosh mouse button emulation as /devices/virtual/input/input3
Mar 13 21:15:47 lilymage-laptop kernel: [    0.933039] ata_piix 0000:00:1f.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
Mar 13 21:15:47 lilymage-laptop kernel: [    0.933281] scsi0 : ata_piix
Mar 13 21:15:47 lilymage-laptop kernel: [    0.933405] scsi1 : ata_piix
Mar 13 21:15:47 lilymage-laptop kernel: [    0.934208] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xbfa0 irq 14
Mar 13 21:15:47 lilymage-laptop kernel: [    0.934213] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xbfa8 irq 15
Mar 13 21:15:47 lilymage-laptop kernel: [    0.935360] Fixed MDIO Bus: probed
Mar 13 21:15:47 lilymage-laptop kernel: [    0.935409] PPP generic driver version 2.4.2
Mar 13 21:15:47 lilymage-laptop kernel: [    0.935532] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
Mar 13 21:15:47 lilymage-laptop kernel: [    0.935556] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 16 (level, low) -> IRQ 16
Mar 13 21:15:47 lilymage-laptop kernel: [    0.935581] ehci_hcd 0000:00:1d.7: EHCI Host Controller
Mar 13 21:15:47 lilymage-laptop kernel: [    0.935659] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
Mar 13 21:15:47 lilymage-laptop kernel: [    0.939589] ehci_hcd 0000:00:1d.7: debug port 1
Mar 13 21:15:47 lilymage-laptop kernel: [    0.940190] ehci_hcd 0000:00:1d.7: irq 16, io mem 0xffa80800
Mar 13 21:15:47 lilymage-laptop kernel: [    0.956024] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
Mar 13 21:15:47 lilymage-laptop kernel: [    0.956149] usb usb1: configuration #1 chosen from 1 choice
Mar 13 21:15:47 lilymage-laptop kernel: [    0.956193] hub 1-0:1.0: USB hub found
Mar 13 21:15:47 lilymage-laptop kernel: [    0.956204] hub 1-0:1.0: 8 ports detected
Mar 13 21:15:47 lilymage-laptop kernel: [    0.956303] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
Mar 13 21:15:47 lilymage-laptop kernel: [    0.956327] uhci_hcd: USB Universal Host Controller Interface driver
Mar 13 21:15:47 lilymage-laptop kernel: [    0.956371] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
Mar 13 21:15:47 lilymage-laptop kernel: [    0.956387] uhci_hcd 0000:00:1d.0: UHCI Host Controller
Mar 13 21:15:47 lilymage-laptop kernel: [    0.956437] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
Mar 13 21:15:47 lilymage-laptop kernel: [    0.956469] uhci_hcd 0000:00:1d.0: irq 16, io base 0x0000bf80
Mar 13 21:15:47 lilymage-laptop kernel: [    0.956577] usb usb2: configuration #1 chosen from 1 choice
Mar 13 21:15:47 lilymage-laptop kernel: [    0.956619] hub 2-0:1.0: USB hub found
Mar 13 21:15:47 lilymage-laptop kernel: [    0.956630] hub 2-0:1.0: 2 ports detected
Mar 13 21:15:47 lilymage-laptop kernel: [    0.956686] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
Mar 13 21:15:47 lilymage-laptop kernel: [    0.956700] uhci_hcd 0000:00:1d.1: UHCI Host Controller
Mar 13 21:15:47 lilymage-laptop kernel: [    0.956743] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
Mar 13 21:15:47 lilymage-laptop kernel: [    0.956787] uhci_hcd 0000:00:1d.1: irq 17, io base 0x0000bf60
Mar 13 21:15:47 lilymage-laptop kernel: [    0.956900] usb usb3: configuration #1 chosen from 1 choice
Mar 13 21:15:47 lilymage-laptop kernel: [    0.956935] hub 3-0:1.0: USB hub found
Mar 13 21:15:47 lilymage-laptop kernel: [    0.956944] hub 3-0:1.0: 2 ports detected
Mar 13 21:15:47 lilymage-laptop kernel: [    0.957012] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
Mar 13 21:15:47 lilymage-laptop kernel: [    0.957026] uhci_hcd 0000:00:1d.2: UHCI Host Controller
Mar 13 21:15:47 lilymage-laptop kernel: [    0.957064] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
Mar 13 21:15:47 lilymage-laptop kernel: [    0.957100] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000bf40
Mar 13 21:15:47 lilymage-laptop kernel: [    0.957208] usb usb4: configuration #1 chosen from 1 choice
Mar 13 21:15:47 lilymage-laptop kernel: [    0.957244] hub 4-0:1.0: USB hub found
Mar 13 21:15:47 lilymage-laptop kernel: [    0.957252] hub 4-0:1.0: 2 ports detected
Mar 13 21:15:47 lilymage-laptop kernel: [    0.957317] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
Mar 13 21:15:47 lilymage-laptop kernel: [    0.957330] uhci_hcd 0000:00:1d.3: UHCI Host Controller
Mar 13 21:15:47 lilymage-laptop kernel: [    0.957377] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
Mar 13 21:15:47 lilymage-laptop kernel: [    0.957414] uhci_hcd 0000:00:1d.3: irq 19, io base 0x0000bf20
Mar 13 21:15:47 lilymage-laptop kernel: [    0.957518] usb usb5: configuration #1 chosen from 1 choice
Mar 13 21:15:47 lilymage-laptop kernel: [    0.957552] hub 5-0:1.0: USB hub found
Mar 13 21:15:47 lilymage-laptop kernel: [    0.957561] hub 5-0:1.0: 2 ports detected
Mar 13 21:15:47 lilymage-laptop kernel: [    0.957700] PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
Mar 13 21:15:47 lilymage-laptop kernel: [    0.962568] serio: i8042 KBD port at 0x60,0x64 irq 1
Mar 13 21:15:47 lilymage-laptop kernel: [    0.962576] serio: i8042 AUX port at 0x60,0x64 irq 12
Mar 13 21:15:47 lilymage-laptop kernel: [    0.962648] mice: PS/2 mouse device common for all mice
Mar 13 21:15:47 lilymage-laptop kernel: [    0.962853] rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
Mar 13 21:15:47 lilymage-laptop kernel: [    0.962890] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
Mar 13 21:15:47 lilymage-laptop kernel: [    0.963036] device-mapper: uevent: version 1.0.3
Mar 13 21:15:47 lilymage-laptop kernel: [    0.963171] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com
Mar 13 21:15:47 lilymage-laptop kernel: [    0.963276] device-mapper: multipath: version 1.1.0 loaded
Mar 13 21:15:47 lilymage-laptop kernel: [    0.963279] device-mapper: multipath round-robin: version 1.0.0 loaded
Mar 13 21:15:47 lilymage-laptop kernel: [    0.963443] EISA: Probing bus 0 at eisa.0
Mar 13 21:15:47 lilymage-laptop kernel: [    0.963451] Cannot allocate resource for EISA slot 1
Mar 13 21:15:47 lilymage-laptop kernel: [    0.963488] EISA: Detected 0 cards.
Mar 13 21:15:47 lilymage-laptop kernel: [    0.963617] cpuidle: using governor ladder
Mar 13 21:15:47 lilymage-laptop kernel: [    0.963701] cpuidle: using governor menu
Mar 13 21:15:47 lilymage-laptop kernel: [    0.964378] TCP cubic registered
Mar 13 21:15:47 lilymage-laptop kernel: [    0.964602] NET: Registered protocol family 10
Mar 13 21:15:47 lilymage-laptop kernel: [    0.965195] lo: Disabled Privacy Extensions
Mar 13 21:15:47 lilymage-laptop kernel: [    0.965616] NET: Registered protocol family 17
Mar 13 21:15:47 lilymage-laptop kernel: [    0.965643] Bluetooth: L2CAP ver 2.13
Mar 13 21:15:47 lilymage-laptop kernel: [    0.965645] Bluetooth: L2CAP socket layer initialized
Mar 13 21:15:47 lilymage-laptop kernel: [    0.965649] Bluetooth: SCO (Voice Link) ver 0.6
Mar 13 21:15:47 lilymage-laptop kernel: [    0.965651] Bluetooth: SCO socket layer initialized
Mar 13 21:15:47 lilymage-laptop kernel: [    0.965707] Bluetooth: RFCOMM TTY layer initialized
Mar 13 21:15:47 lilymage-laptop kernel: [    0.965711] Bluetooth: RFCOMM socket layer initialized
Mar 13 21:15:47 lilymage-laptop kernel: [    0.965714] Bluetooth: RFCOMM ver 1.11
Mar 13 21:15:47 lilymage-laptop kernel: [    0.965758] Using IPI No-Shortcut mode
Mar 13 21:15:47 lilymage-laptop kernel: [    0.965857] registered taskstats version 1
Mar 13 21:15:47 lilymage-laptop kernel: [    0.966010]   Magic number: 2:798:295
Mar 13 21:15:47 lilymage-laptop kernel: [    0.966046] tty tty28: hash matches
Mar 13 21:15:47 lilymage-laptop kernel: [    0.966123] rtc_cmos 00:06: setting system clock to 2010-03-13 20:15:12 UTC (1268511312)
Mar 13 21:15:47 lilymage-laptop kernel: [    0.966128] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
Mar 13 21:15:47 lilymage-laptop kernel: [    0.966131] EDD information not available.
Mar 13 21:15:47 lilymage-laptop kernel: [    0.967763] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
Mar 13 21:15:47 lilymage-laptop kernel: [    1.112963] ata1.00: ATA-6: HTS548040M9AT00, MG2OA5EA, max UDMA/100
Mar 13 21:15:47 lilymage-laptop kernel: [    1.112968] ata1.00: 78140160 sectors, multi 8: LBA48 
Mar 13 21:15:47 lilymage-laptop kernel: [    1.113022] ata1.01: ATAPI: PHILIPS CD-RW/DVD-ROM SCB5265, TD15, max UDMA/33
Mar 13 21:15:47 lilymage-laptop kernel: [    1.128060] Clocksource tsc unstable (delta = -112492181 ns)
Mar 13 21:15:47 lilymage-laptop kernel: [    1.128885] ata1.00: configured for UDMA/100
Mar 13 21:15:47 lilymage-laptop kernel: [    1.144461] ata1.01: configured for UDMA/33
Mar 13 21:15:47 lilymage-laptop kernel: [    1.146933] scsi 0:0:0:0: Direct-Access     ATA      HTS548040M9AT00  MG2O PQ: 0 ANSI: 5
Mar 13 21:15:47 lilymage-laptop kernel: [    1.147103] sd 0:0:0:0: Attached scsi generic sg0 type 0
Mar 13 21:15:47 lilymage-laptop kernel: [    1.147759] sd 0:0:0:0: [sda] 78140160 512-byte logical blocks: (40.0 GB/37.2 GiB)
Mar 13 21:15:47 lilymage-laptop kernel: [    1.147826] sd 0:0:0:0: [sda] Write Protect is off
Mar 13 21:15:47 lilymage-laptop kernel: [    1.147865] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Mar 13 21:15:47 lilymage-laptop kernel: [    1.148063]  sda:
Mar 13 21:15:47 lilymage-laptop kernel: [    1.148202] scsi 0:0:1:0: CD-ROM            PHILIPS  CDRW/DVD SCB5265 TD15 PQ: 0 ANSI: 5
Mar 13 21:15:47 lilymage-laptop kernel: [    1.172691]  sda1 sda2 < sda5 >
Mar 13 21:15:47 lilymage-laptop kernel: [    1.206980] sd 0:0:0:0: [sda] Attached SCSI disk
Mar 13 21:15:47 lilymage-laptop kernel: [    1.210305] sr0: scsi3-mmc drive: 4x/24x writer cd/rw xa/form2 cdda tray
Mar 13 21:15:47 lilymage-laptop kernel: [    1.210310] Uniform CD-ROM driver Revision: 3.20
Mar 13 21:15:47 lilymage-laptop kernel: [    1.210474] sr 0:0:1:0: Attached scsi generic sg1 type 5
Mar 13 21:15:47 lilymage-laptop kernel: [    1.210507] Freeing unused kernel memory: 540k freed
Mar 13 21:15:47 lilymage-laptop kernel: [    1.210925] Write protecting the kernel text: 4568k
Mar 13 21:15:47 lilymage-laptop kernel: [    1.210977] Write protecting the kernel read-only data: 1836k
Mar 13 21:15:47 lilymage-laptop kernel: [    1.404823] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A03:00/device:18/input/input5
Mar 13 21:15:47 lilymage-laptop kernel: [    1.404884] ACPI: Video Device [VID] (multi-head: yes  rom: no  post: no)
Mar 13 21:15:47 lilymage-laptop kernel: [    1.404944] ACPI Warning: \_SB_.PCI0.VID2._DOD: Return Package has no elements (empty) 20090521 nspredef-434
Mar 13 21:15:47 lilymage-laptop kernel: [    1.405026] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A03:00/device:1d/input/input6
Mar 13 21:15:47 lilymage-laptop kernel: [    1.405059] ACPI: Video Device [VID2] (multi-head: yes  rom: no  post: no)
Mar 13 21:15:47 lilymage-laptop kernel: [    1.468397] usb 2-1: new low speed USB device using uhci_hcd and address 2
Mar 13 21:15:47 lilymage-laptop kernel: [    1.482281] Linux agpgart interface v0.103
Mar 13 21:15:47 lilymage-laptop kernel: [    1.487344] agpgart-intel 0000:00:00.0: Intel 915GM Chipset
Mar 13 21:15:47 lilymage-laptop kernel: [    1.487850] agpgart-intel 0000:00:00.0: detected 7932K stolen memory
Mar 13 21:15:47 lilymage-laptop kernel: [    1.544396] e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI
Mar 13 21:15:47 lilymage-laptop kernel: [    1.544401] e100: Copyright(c) 1999-2006 Intel Corporation
Mar 13 21:15:47 lilymage-laptop kernel: [    1.544488] e100 0000:02:08.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
Mar 13 21:15:47 lilymage-laptop kernel: [    1.571818] e100 0000:02:08.0: PME# disabled
Mar 13 21:15:47 lilymage-laptop kernel: [    1.606136] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xc0000000
Mar 13 21:15:47 lilymage-laptop kernel: [    1.659402] e100: eth0: e100_probe: addr 0xdfdff000, irq 20, MAC addr 00:12:3f:f5:17:2e
Mar 13 21:15:47 lilymage-laptop kernel: [    1.659830] [drm] Initialized drm 1.1.0 20060810
Mar 13 21:15:47 lilymage-laptop kernel: [    1.680474] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
Mar 13 21:15:47 lilymage-laptop kernel: [    1.788707] integrated sync not supported
Mar 13 21:15:47 lilymage-laptop kernel: [    2.280397] [drm] DAC-6: set mode 640x480 0
Mar 13 21:15:47 lilymage-laptop kernel: [    2.361134] usb 2-1: configuration #1 chosen from 1 choice
Mar 13 21:15:47 lilymage-laptop kernel: [    2.473828] usbcore: registered new interface driver hiddev
Mar 13 21:15:47 lilymage-laptop kernel: [    2.474522] integrated sync not supported
Mar 13 21:15:47 lilymage-laptop kernel: [    2.515210] [drm] TV-14: set mode NTSC 480i 0
Mar 13 21:15:47 lilymage-laptop kernel: [    2.636082] input: PS/2+USB Mouse as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1:1.0/input/input7
Mar 13 21:15:47 lilymage-laptop kernel: [    2.636194] generic-usb 0003:04F3:0210.0001: input,hidraw0: USB HID v1.11 Mouse [PS/2+USB Mouse] on usb-0000:00:1d.0-1/input0
Mar 13 21:15:47 lilymage-laptop kernel: [    2.636216] usbcore: registered new interface driver usbhid
Mar 13 21:15:47 lilymage-laptop kernel: [    2.636221] usbhid: v2.6:USB HID core driver
Mar 13 21:15:47 lilymage-laptop kernel: [    2.646579] [drm] fb0: inteldrmfb frame buffer device
Mar 13 21:15:47 lilymage-laptop kernel: [    2.646592] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
Mar 13 21:15:47 lilymage-laptop kernel: [    2.721928] [drm] LVDS-8: set mode 1024x768 17
Mar 13 21:15:47 lilymage-laptop kernel: [    3.091985] Console: switching to colour frame buffer device 128x48
Mar 13 21:15:47 lilymage-laptop kernel: [    3.400997] PM: Starting manual resume from disk
Mar 13 21:15:47 lilymage-laptop kernel: [    3.408061] EXT3-fs: INFO: recovery required on readonly filesystem.
Mar 13 21:15:47 lilymage-laptop kernel: [    3.408066] EXT3-fs: write access will be enabled during recovery.
Mar 13 21:15:47 lilymage-laptop kernel: [    3.478418] kjournald starting.  Commit interval 5 seconds
Mar 13 21:15:47 lilymage-laptop kernel: [    3.478432] EXT3-fs: recovery complete.
Mar 13 21:15:47 lilymage-laptop kernel: [    3.480005] EXT3-fs: mounted filesystem with writeback data mode.
Mar 13 21:15:47 lilymage-laptop kernel: [    5.105106] type=1505 audit(1268511316.638:2): operation="profile_load" pid=370 name=/usr/share/gdm/guest-session/Xsession
Mar 13 21:15:47 lilymage-laptop kernel: [    5.134465] type=1505 audit(1268511316.665:3): operation="profile_load" pid=371 name=/sbin/dhclient3
Mar 13 21:15:47 lilymage-laptop kernel: [    5.135373] type=1505 audit(1268511316.665:4): operation="profile_load" pid=371 name=/usr/lib/NetworkManager/nm-dhcp-client.action
Mar 13 21:15:47 lilymage-laptop kernel: [    5.135862] type=1505 audit(1268511316.665:5): operation="profile_load" pid=371 name=/usr/lib/connman/scripts/dhclient-script
Mar 13 21:15:47 lilymage-laptop kernel: [    5.211569] type=1505 audit(1268511316.742:6): operation="profile_load" pid=372 name=/usr/bin/evince
Mar 13 21:15:47 lilymage-laptop kernel: [    5.226514] type=1505 audit(1268511316.757:7): operation="profile_load" pid=372 name=/usr/bin/evince-previewer
Mar 13 21:15:47 lilymage-laptop kernel: [    5.235304] type=1505 audit(1268511316.765:8): operation="profile_load" pid=372 name=/usr/bin/evince-thumbnailer
Mar 13 21:15:47 lilymage-laptop kernel: [    5.288706] type=1505 audit(1268511316.821:9): operation="profile_load" pid=374 name=/usr/lib/cups/backend/cups-pdf
Mar 13 21:15:47 lilymage-laptop kernel: [    5.289773] type=1505 audit(1268511316.821:10): operation="profile_load" pid=374 name=/usr/sbin/cupsd
Mar 13 21:15:47 lilymage-laptop kernel: [    5.828036] usb 1-3: new high speed USB device using ehci_hcd and address 3
Mar 13 21:15:47 lilymage-laptop kernel: [    5.961471] usb 1-3: configuration #1 chosen from 2 choices
Mar 13 21:15:47 lilymage-laptop kernel: [   33.866863] udev: starting version 147
Mar 13 21:15:47 lilymage-laptop kernel: [   33.893949] Adding 706820k swap on /dev/sda5.  Priority:-1 extents:1 across:706820k 
Mar 13 21:15:47 lilymage-laptop kernel: [   34.552922] ip_tables: (C) 2000-2006 Netfilter Core Team
Mar 13 21:15:47 lilymage-laptop kernel: [   34.684697] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
Mar 13 21:15:47 lilymage-laptop kernel: [   35.010593] Initializing USB Mass Storage driver...
Mar 13 21:15:47 lilymage-laptop kernel: [   35.010772] scsi2 : SCSI emulation for USB Mass Storage devices
Mar 13 21:15:47 lilymage-laptop kernel: [   35.010898] usbcore: registered new interface driver usb-storage
Mar 13 21:15:47 lilymage-laptop kernel: [   35.010903] USB Mass Storage support registered.
Mar 13 21:15:47 lilymage-laptop kernel: [   35.030963] EXT3 FS on sda1, internal journal
Mar 13 21:15:47 lilymage-laptop kernel: [   35.053373] intel_rng: FWH not detected
Mar 13 21:15:47 lilymage-laptop kernel: [   35.072133] lp: driver loaded but no devices found
Mar 13 21:15:47 lilymage-laptop kernel: [   35.259896] dell-wmi: No known WMI GUID found
Mar 13 21:15:47 lilymage-laptop kernel: [   35.263853] yenta_cardbus 0000:02:01.0: CardBus bridge found [1028:01a6]
Mar 13 21:15:47 lilymage-laptop kernel: [   35.263881] yenta_cardbus 0000:02:01.0: Using CSCINT to route CSC interrupts to PCI
Mar 13 21:15:47 lilymage-laptop kernel: [   35.263885] yenta_cardbus 0000:02:01.0: Routing CardBus interrupts to PCI
Mar 13 21:15:47 lilymage-laptop kernel: [   35.263892] yenta_cardbus 0000:02:01.0: TI: mfunc 0x00001002, devctl 0x64
Mar 13 21:15:47 lilymage-laptop kernel: [   35.434268] ADDRCONF(NETDEV_UP): eth0: link is not ready
Mar 13 21:15:47 lilymage-laptop kernel: [   35.500837] yenta_cardbus 0000:02:01.0: ISA IRQ mask 0x0cf8, PCI irq 16
Mar 13 21:15:47 lilymage-laptop kernel: [   35.500845] yenta_cardbus 0000:02:01.0: Socket status: 30000007
Mar 13 21:15:47 lilymage-laptop kernel: [   35.500851] pci_bus 0000:02: Raising subordinate bus# of parent bus (#02) from #03 to #06
Mar 13 21:15:47 lilymage-laptop kernel: [   35.500864] yenta_cardbus 0000:02:01.0: pcmcia: parent PCI bridge I/O window: 0xd000 - 0xdfff
Mar 13 21:15:47 lilymage-laptop kernel: [   35.500870] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xd000-0xdfff: clean.
Mar 13 21:15:47 lilymage-laptop kernel: [   35.501517] yenta_cardbus 0000:02:01.0: pcmcia: parent PCI bridge Memory window: 0xdfd00000 - 0xdfdfffff
Mar 13 21:15:47 lilymage-laptop kernel: [   35.501522] yenta_cardbus 0000:02:01.0: pcmcia: parent PCI bridge Memory window: 0x50000000 - 0x53ffffff
Mar 13 21:15:47 lilymage-laptop kernel: [   35.650757] __ratelimit: 3 callbacks suppressed
Mar 13 21:15:47 lilymage-laptop kernel: [   35.650763] type=1505 audit(1268511347.181:12): operation="profile_replace" pid=839 name=/usr/share/gdm/guest-session/Xsession
Mar 13 21:15:47 lilymage-laptop kernel: [   35.653141] type=1505 audit(1268511347.185:13): operation="profile_replace" pid=840 name=/sbin/dhclient3
Mar 13 21:15:47 lilymage-laptop kernel: [   35.654047] type=1505 audit(1268511347.185:14): operation="profile_replace" pid=840 name=/usr/lib/NetworkManager/nm-dhcp-client.action
Mar 13 21:15:47 lilymage-laptop kernel: [   35.654540] type=1505 audit(1268511347.185:15): operation="profile_replace" pid=840 name=/usr/lib/connman/scripts/dhclient-script
Mar 13 21:15:47 lilymage-laptop kernel: [   35.662086] type=1505 audit(1268511347.193:16): operation="profile_replace" pid=841 name=/usr/bin/evince
Mar 13 21:15:47 lilymage-laptop kernel: [   35.678406] type=1505 audit(1268511347.209:17): operation="profile_replace" pid=841 name=/usr/bin/evince-previewer
Mar 13 21:15:47 lilymage-laptop kernel: [   35.687649] type=1505 audit(1268511347.217:18): operation="profile_replace" pid=841 name=/usr/bin/evince-thumbnailer
Mar 13 21:15:47 lilymage-laptop kernel: [   35.700942] type=1505 audit(1268511347.233:19): operation="profile_replace" pid=843 name=/usr/lib/cups/backend/cups-pdf
Mar 13 21:15:47 lilymage-laptop kernel: [   35.702031] type=1505 audit(1268511347.233:20): operation="profile_replace" pid=843 name=/usr/sbin/cupsd
Mar 13 21:15:47 lilymage-laptop kernel: [   35.705595] type=1505 audit(1268511347.237:21): operation="profile_replace" pid=844 name=/usr/sbin/tcpdump
Mar 13 21:15:47 lilymage-laptop kernel: [   35.732839] Disabling lock debugging due to kernel taint
Mar 13 21:15:47 lilymage-laptop kernel: [   35.743118] ndiswrapper version 1.55 loaded (smp=yes, preempt=no)
Mar 13 21:15:47 lilymage-laptop kernel: [   35.762298] Synaptics Touchpad, model: 1, fw: 6.2, id: 0x8fa0b1, caps: 0xa04713/0x200000
Mar 13 21:15:47 lilymage-laptop kernel: [   35.797352] usbcore: registered new interface driver ndiswrapper
Mar 13 21:15:47 lilymage-laptop kernel: [   35.815768] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input8
Mar 13 21:15:47 lilymage-laptop kernel: [   36.112224] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x100-0x3af: clean.
Mar 13 21:15:47 lilymage-laptop kernel: [   36.113948] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x3e0-0x4ff: clean.
Mar 13 21:15:47 lilymage-laptop kernel: [   36.114684] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x820-0x8ff: clean.
Mar 13 21:15:47 lilymage-laptop kernel: [   36.115296] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xc00-0xcf7: clean.
Mar 13 21:15:47 lilymage-laptop kernel: [   36.116128] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xa00-0xaff: clean.
Mar 13 21:15:48 lilymage-laptop kernel: [   36.647256] Intel ICH 0000:00:1e.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16
Mar 13 21:15:48 lilymage-laptop kernel: [   37.006433] ppdev: user-space parallel port driver
Mar 13 21:15:48 lilymage-laptop kernel: [   37.327903] [drm] DAC-6: set mode 640x480 0
Mar 13 21:15:49 lilymage-laptop kernel: [   37.481179] intel8x0_measure_ac97_clock: measured 56998 usecs (2746 samples)
Mar 13 21:15:49 lilymage-laptop kernel: [   37.481186] intel8x0: clocking to 48000
Mar 13 21:15:49 lilymage-laptop kernel: [   37.624352] [drm] DAC-6: set mode 640x480 0
Mar 13 21:15:49 lilymage-laptop kernel: [   37.816149] e100: eth0 NIC Link is Up 100 Mbps Full Duplex
Mar 13 21:15:49 lilymage-laptop kernel: [   37.828439] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
Mar 13 21:15:49 lilymage-laptop kernel: [   37.864288] integrated sync not supported
Mar 13 21:15:49 lilymage-laptop kernel: [   37.905141] [drm] TV-14: set mode NTSC 480i 0
Mar 13 21:15:49 lilymage-laptop kernel: [   38.057403] [drm] TV-14: set mode NTSC 480i 0
Mar 13 21:15:49 lilymage-laptop kernel: [   38.202654] [drm] DAC-6: set mode 640x480 0
Mar 13 21:15:49 lilymage-laptop kernel: [   38.307924] [drm] DAC-6: set mode 640x480 0
Mar 13 21:15:50 lilymage-laptop kernel: [   38.569773] integrated sync not supported
Mar 13 21:15:50 lilymage-laptop kernel: [   38.611934] [drm] TV-14: set mode NTSC 480i 0
Mar 13 21:15:50 lilymage-laptop kernel: [   38.757762] [drm] TV-14: set mode NTSC 480i 0
Mar 13 21:15:51 lilymage-laptop kernel: [   40.031279] scsi 2:0:0:0: Direct-Access     Apple    iPod             1.62 PQ: 0 ANSI: 0
Mar 13 21:15:51 lilymage-laptop kernel: [   40.031960] sd 2:0:0:0: Attached scsi generic sg2 type 0
Mar 13 21:15:51 lilymage-laptop kernel: [   40.043954] sd 2:0:0:0: [sdb] 1941441 4096-byte logical blocks: (7.95 GB/7.40 GiB)
Mar 13 21:15:51 lilymage-laptop kernel: [   40.052107] sd 2:0:0:0: [sdb] Write Protect is off
Mar 13 21:15:51 lilymage-laptop kernel: [   40.058986] sd 2:0:0:0: [sdb] 1941441 4096-byte logical blocks: (7.95 GB/7.40 GiB)
Mar 13 21:15:51 lilymage-laptop kernel: [   40.061420]  sdb: sdb1
Mar 13 21:15:51 lilymage-laptop kernel: [   40.116052] sd 2:0:0:0: [sdb] 1941441 4096-byte logical blocks: (7.95 GB/7.40 GiB)
Mar 13 21:15:51 lilymage-laptop kernel: [   40.124372] sd 2:0:0:0: [sdb] Attached SCSI removable disk
Mar 13 21:15:54 lilymage-laptop kernel: [   42.944027] [drm] DAC-6: set mode 640x480 0
Mar 13 21:15:54 lilymage-laptop kernel: [   43.069576] [drm] DAC-6: set mode 640x480 0
Mar 13 21:15:54 lilymage-laptop kernel: [   43.234017] integrated sync not supported
Mar 13 21:15:54 lilymage-laptop kernel: [   43.276162] [drm] TV-14: set mode NTSC 480i 0
Mar 13 21:15:54 lilymage-laptop kernel: [   43.418044] [drm] TV-14: set mode NTSC 480i 0
Mar 13 21:15:55 lilymage-laptop kernel: [   43.574732] [drm] DAC-6: set mode 640x480 0
Mar 13 21:15:55 lilymage-laptop kernel: [   43.684980] [drm] DAC-6: set mode 640x480 0
Mar 13 21:15:55 lilymage-laptop kernel: [   43.852281] integrated sync not supported
Mar 13 21:15:55 lilymage-laptop kernel: [   43.894447] [drm] TV-14: set mode NTSC 480i 0
Mar 13 21:15:55 lilymage-laptop kernel: [   44.036408] [drm] TV-14: set mode NTSC 480i 0
Mar 13 21:15:55 lilymage-laptop kernel: [   44.192890] [drm] DAC-6: set mode 640x480 0
Mar 13 21:15:55 lilymage-laptop kernel: [   44.300047] [drm] DAC-6: set mode 640x480 0
Mar 13 21:15:56 lilymage-laptop kernel: [   44.465890] integrated sync not supported
Mar 13 21:15:56 lilymage-laptop kernel: [   44.508051] [drm] TV-14: set mode NTSC 480i 0
Mar 13 21:15:56 lilymage-laptop kernel: [   44.652013] [drm] TV-14: set mode NTSC 480i 0
Mar 13 21:15:57 lilymage-laptop kernel: [   46.315310] [drm] DAC-6: set mode 640x480 0
Mar 13 21:15:58 lilymage-laptop kernel: [   46.449208] [drm] DAC-6: set mode 640x480 0
Mar 13 21:15:58 lilymage-laptop kernel: [   46.611637] integrated sync not supported
Mar 13 21:15:58 lilymage-laptop kernel: [   46.653756] [drm] TV-14: set mode NTSC 480i 0
Mar 13 21:15:58 lilymage-laptop kernel: [   46.794239] [drm] TV-14: set mode NTSC 480i 0
Mar 13 21:15:59 lilymage-laptop pulseaudio[1416]: ratelimit.c: 2 events suppressed
Mar 13 21:16:04 lilymage-laptop pulseaudio[1416]: ratelimit.c: 1 events suppressed

kyncani · Le 13/03/2010, à 22:28

Bon ben là tout est bien, correct. Ca doit bien fonctionner là, non

Essaie de réactiver ton lecteur de cdrom pour voir, si le pb revient, essaie depuis un autre OS (windows par exemple) si tu l'as et fait fonctionner ton lecteur de cd (copie le contenu d'un cd sur disque par exemple).
Si ça déconne avec linux et windows, il faudra abandonner ton lecteur de cd ou le changer.

Lilymage · Le 13/03/2010, à 22:39

Oui, j'ai pas vu de problème là
Par contre, je suis toujours avec le noyau précédent, donc il faut que je reste avec ce noyau là jusqu'à ce qu'il y en ait un nouveau?

kyncani · Le 13/03/2010, à 23:20

Euh, pourquoi tu es toujours avec le noyau précédent, ça ne fonctionne pas avec l'actuel ?

Lilymage · Le 13/03/2010, à 23:56

Ben nan, en fait, si je réessaye avec le noyau actuel, il me remet les messages d'erreur au démarrage x') Donc en fait on a rien réglé? >.<

kyncani · Le 14/03/2010, à 01:09

Non, tu sais maintenant que tu as une machine fonctionnelle sur le dernier kernel sans le lecteur de cdrom au moins.
Bon ben alors continue à booter sur l'ancien noyau, avec le cdrom si ça marche et sans sinon.
Ensuite, essaie si tu veux les prochains kernels si il y en a. Sinon, de toute manière, lucid lynx sort dans deux mois.
Poste le dmesg que tu as avec le noyau actuel si tu veux, j'y jetterai un coup d'oeil
Avec le /var/log/messages c'est mieux. Pas en entier le /var/log/messages, juste les messages du boot actuel. Tu peux repérer le dernier démarrage avec :

Mar 13 21:15:46 lilymage-laptop kernel: imklog 4.2.0, log source = /var/run/rsyslog/kmsg started.
Mar 13 21:15:46 lilymage-laptop rsyslogd: [origin software="rsyslogd" swVersion="4.2.0" x-pid="706" x-info="http://www.rsyslog.com"] (re)start
Mar 13 21:15:47 lilymage-laptop rsyslogd: rsyslogd's groupid changed to 102
Mar 13 21:15:47 lilymage-laptop rsyslogd: rsyslogd's userid changed to 101
Mar 13 21:15:47 lilymage-laptop kernel: [    0.000000] Initializing cgroup subsys cpuset
Mar 13 21:15:47 lilymage-laptop kernel: [    0.000000] Initializing cgroup subsys cpu

Booter sur l'avant dernier kernel, c'est pas la mort hein

Ubuntu-fr

Navigation

Liens de recherche

Annonce

#1 Le 13/03/2010, à 17:47

Problèmes suite à une MàJ

#2 Le 13/03/2010, à 18:22

Re : Problèmes suite à une MàJ

#3 Le 13/03/2010, à 19:34

Re : Problèmes suite à une MàJ

#4 Le 13/03/2010, à 20:05

Re : Problèmes suite à une MàJ

#5 Le 13/03/2010, à 20:37

Re : Problèmes suite à une MàJ

#6 Le 13/03/2010, à 21:04

Re : Problèmes suite à une MàJ

#7 Le 13/03/2010, à 21:25

Re : Problèmes suite à une MàJ

#8 Le 13/03/2010, à 21:31

Re : Problèmes suite à une MàJ

#9 Le 13/03/2010, à 22:22

Re : Problèmes suite à une MàJ

#10 Le 13/03/2010, à 22:23

Re : Problèmes suite à une MàJ

#11 Le 13/03/2010, à 22:28

Re : Problèmes suite à une MàJ

#12 Le 13/03/2010, à 22:39

Re : Problèmes suite à une MàJ

#13 Le 13/03/2010, à 23:20

Re : Problèmes suite à une MàJ

#14 Le 13/03/2010, à 23:56

Re : Problèmes suite à une MàJ

#15 Le 14/03/2010, à 01:09

Re : Problèmes suite à une MàJ

Pied de page des forums