Contenu | Rechercher | Menus

Annonce

Si vous rencontrez des soucis à rester connecté sur le forum (ou si vous avez perdu votre mot de passe) déconnectez-vous et reconnectez-vous depuis cette page, en cochant la case "Me connecter automatiquement lors de mes prochaines visites".
Test de l'ISO d'Ubuntu francophone : nous avons besoin de testeurs pour la version francophone d'Ubuntu 14.04. Liens et informations ici.

Attention, une faille de sécurité dans bash a récemment été rapportée, il est recommandé de mettre à jour son système (plus de détails)

#1 Le 30/04/2010, à 13:51

tmeg57

Lucid : Démarrage encore plus lent qu'avant ?

C'est moi ou le démarrage d'ubuntu Lucid lynx est encore plus lent que la karmic ?

Il promettais 10 sec, je suis à 45 secondes pour démarrer après avoir valider mon choix sous grub.

Le plus long est le boot (plus long qu'avant), après des que j'ai le nouveau logo d'ubuntu, ca va assez vite.


Je suis encore en ext 3 et grub 1. Je veux bien qu'a cause de cela je ne soit pas dans les 10 secondes, mais de la à régresser !


Fixe 1 : Ubuntu Lucid Lynx 10.04 32 Bits en Machine virtuelle VMWare - Intel Core i7 860 - 8 Go de Ram - ATI Radeon Saphire 5850 - Cate Mere Gigabyte P55A-UD4
Fixe 2 : Ubuntu Lucid Lynx 10.04 32 Bits - AMD X2 64 5000+ - 2 Go de RAM - Geforce 7950 GTX2 - CM K9 Diamond
Portable : Debian Leny 5.04 32 Bits - ThinkPad T41 2373 - Pentium M 1.4 GHz - 512 Mo de Ram - ATI Mobility Radeon 7500

Hors ligne

#2 Le 30/04/2010, à 13:52

cliffsofdover

Re : Lucid : Démarrage encore plus lent qu'avant ?

Ça boot en 10/12s après le choix de grub ( j'ai un HDD mécanique, je parie qu'avec un SSD ça serai dans les 6s (h)  )
Edit : 10s avec un Un P4 @2.6 et 768Mo en Ram .....
Je pense t'as un problème

Dernière modification par cliffsofdover (Le 30/04/2010, à 13:54)

Hors ligne

#3 Le 30/04/2010, à 14:07

JB-home

Re : Lucid : Démarrage encore plus lent qu'avant ?

perso ça va beaucoup plus vite, avec un autologin s'est parfait !

Hors ligne

#4 Le 30/04/2010, à 14:24

pestak

Re : Lucid : Démarrage encore plus lent qu'avant ?

j'ai fait le test sous grub2 et grub1.
apparement, le boot sur grub1 est plus long; maintenant le pourquoi du comment ?


journee "libre en fête", le 9 mai à angouleme !
http://forum.linux-angouleme.org/viewtopic.php?f=5&t=42

Hors ligne

#5 Le 30/04/2010, à 14:27

tmeg57

Re : Lucid : Démarrage encore plus lent qu'avant ?

je vais essayer de mettre grub 2 sans tout péter smile


Fixe 1 : Ubuntu Lucid Lynx 10.04 32 Bits en Machine virtuelle VMWare - Intel Core i7 860 - 8 Go de Ram - ATI Radeon Saphire 5850 - Cate Mere Gigabyte P55A-UD4
Fixe 2 : Ubuntu Lucid Lynx 10.04 32 Bits - AMD X2 64 5000+ - 2 Go de RAM - Geforce 7950 GTX2 - CM K9 Diamond
Portable : Debian Leny 5.04 32 Bits - ThinkPad T41 2373 - Pentium M 1.4 GHz - 512 Mo de Ram - ATI Mobility Radeon 7500

Hors ligne

#6 Le 30/04/2010, à 14:37

tmeg57

Re : Lucid : Démarrage encore plus lent qu'avant ?

Bon je viens de tester grub2 mais pas d'amélioration (je gagne peut être trois secondes.)

Il passe un temps énnorme sur l'écran noir

boot from (hd4,4) ext3 XXXXXXXXXXXXXXXXXXXXX
Starting Up ....

Dernière modification par tmeg57 (Le 30/04/2010, à 14:40)


Fixe 1 : Ubuntu Lucid Lynx 10.04 32 Bits en Machine virtuelle VMWare - Intel Core i7 860 - 8 Go de Ram - ATI Radeon Saphire 5850 - Cate Mere Gigabyte P55A-UD4
Fixe 2 : Ubuntu Lucid Lynx 10.04 32 Bits - AMD X2 64 5000+ - 2 Go de RAM - Geforce 7950 GTX2 - CM K9 Diamond
Portable : Debian Leny 5.04 32 Bits - ThinkPad T41 2373 - Pentium M 1.4 GHz - 512 Mo de Ram - ATI Mobility Radeon 7500

Hors ligne

#7 Le 30/04/2010, à 14:50

Shma

Re : Lucid : Démarrage encore plus lent qu'avant ?

Moi aussi super lent le démarrage et j'ai grub 2...
Des que le grub est passé, j'ai 10 secondes d'écran noir et après 20-25 secondes avec le logo ubuntu et les points de chargement en dessous.
Moi qui a fait la mise à jour en partie pour la rapidité de démarrage, je suis assez déçu. Il est plus lent que karmic koala..


Asus N56VZ-4096 - Ubuntu 12.10

Hors ligne

#8 Le 30/04/2010, à 16:17

tmeg57

Re : Lucid : Démarrage encore plus lent qu'avant ?

Voici mon graphique bootchar si des experts s'y connaissent.

65688_dieu_lucid_20100430_2.png

Dernière modification par tmeg57 (Le 30/04/2010, à 16:17)


Fixe 1 : Ubuntu Lucid Lynx 10.04 32 Bits en Machine virtuelle VMWare - Intel Core i7 860 - 8 Go de Ram - ATI Radeon Saphire 5850 - Cate Mere Gigabyte P55A-UD4
Fixe 2 : Ubuntu Lucid Lynx 10.04 32 Bits - AMD X2 64 5000+ - 2 Go de RAM - Geforce 7950 GTX2 - CM K9 Diamond
Portable : Debian Leny 5.04 32 Bits - ThinkPad T41 2373 - Pentium M 1.4 GHz - 512 Mo de Ram - ATI Mobility Radeon 7500

Hors ligne

#9 Le 30/04/2010, à 22:44

rollings4

Re : Lucid : Démarrage encore plus lent qu'avant ?

up! salut a tous moi aussi j'ai le même problème que tmeg57 aidez nous s'il vous plait , on veut aussi profiter du demarrage rapide.

Hors ligne

#10 Le 30/04/2010, à 23:03

pipocas

Re : Lucid : Démarrage encore plus lent qu'avant ?

Essayez de désactiver le lecteur de disquettes dans le bios pour voir...

Hors ligne

#11 Le 30/04/2010, à 23:07

rollings4

Re : Lucid : Démarrage encore plus lent qu'avant ?

merci pipocas pour ta réponse mais comment est ce qu'on peut faire cette manip??

Hors ligne

#12 Le 30/04/2010, à 23:21

Rogan77

Re : Lucid : Démarrage encore plus lent qu'avant ?

Je m'abonne au sujet, j'ai le même problème et il m'affiche un message d'erreur ultra rapidement au bout d'un certain temps et ensuite il boot en vitesse, mais comme j'ai la flemme et pas le temps de m'en occuper en ce moment, que je ne suis pas si pressé que ça pour le démarrage de ma machine... big_smile

Surtout que j'avais cru voir qu'il bloquait sur de la gestion d'énergie or j'ai un pc fixe... roll


Ubuntu Maverick Meerkat 64 bits

Hors ligne

#13 Le 01/05/2010, à 15:14

Emetryon

Re : Lucid : Démarrage encore plus lent qu'avant ?

Même problème après migration de Karmic à Lucid. après Choix dans le Grub, écran noir avec " _ " clignotant en haut . Puis un Ubuntu chargeant d'un violet du plus mauvais gout. 40 Sec de boot avant écran de login au lieu de 20...

Hors ligne

#14 Le 01/05/2010, à 15:30

grandtoubab

Re : Lucid : Démarrage encore plus lent qu'avant ?

consulter vos logs dans /var/log

exemple fichier dmesg

Boot en 17 secondes cool

[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Linux version 2.6.33-02063303-generic (root@zinc) (gcc version 4.2.3 (Ubuntu 4.2.3-2ubuntu7)) #02063303 SMP Tue Apr 27 12:14:21 UTC 2010
[    0.000000] BIOS-provided physical RAM map:
[    0.000000]  BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[    0.000000]  BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[    0.000000]  BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
[    0.000000]  BIOS-e820: 0000000000100000 - 0000000017fd0000 (usable)
[    0.000000]  BIOS-e820: 0000000017fd0000 - 0000000017fdf000 (ACPI data)
[    0.000000]  BIOS-e820: 0000000017fdf000 - 0000000018000000 (ACPI NVS)
[    0.000000]  BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[    0.000000]  BIOS-e820: 00000000ff780000 - 0000000100000000 (reserved)
[    0.000000] Notice: NX (Execute Disable) protection cannot be enabled: non-PAE kernel!
[    0.000000] DMI 2.3 present.
[    0.000000] AMI BIOS detected: BIOS may corrupt low RAM, working around it.
[    0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[    0.000000] last_pfn = 0x17fd0 max_arch_pfn = 0x100000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-DFFFF uncachable
[    0.000000]   E0000-EFFFF write-through
[    0.000000]   F0000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 000000000 mask FE0000000 write-back
[    0.000000]   1 base 020000000 mask FF8000000 write-back
[    0.000000]   2 disabled
[    0.000000]   3 disabled
[    0.000000]   4 disabled
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[    0.000000] Scanning 0 areas for low memory corruption
[    0.000000] modified physical RAM map:
[    0.000000]  modified: 0000000000000000 - 0000000000010000 (reserved)
[    0.000000]  modified: 0000000000010000 - 000000000009fc00 (usable)
[    0.000000]  modified: 000000000009fc00 - 00000000000a0000 (reserved)
[    0.000000]  modified: 00000000000e4000 - 0000000000100000 (reserved)
[    0.000000]  modified: 0000000000100000 - 0000000017fd0000 (usable)
[    0.000000]  modified: 0000000017fd0000 - 0000000017fdf000 (ACPI data)
[    0.000000]  modified: 0000000017fdf000 - 0000000018000000 (ACPI NVS)
[    0.000000]  modified: 00000000fee00000 - 00000000fee01000 (reserved)
[    0.000000]  modified: 00000000ff780000 - 0000000100000000 (reserved)
[    0.000000] initial memory mapped : 0 - 00c00000
[    0.000000] init_memory_mapping: 0000000000000000-0000000017fd0000
[    0.000000]  0000000000 - 0000400000 page 4k
[    0.000000]  0000400000 - 0017c00000 page 2M
[    0.000000]  0017c00000 - 0017fd0000 page 4k
[    0.000000] kernel direct mapping tables up to 17fd0000 @ 15000-1a000
[    0.000000] RAMDISK: 1182e000 - 1201bc21
[    0.000000] ACPI: RSDP 000f8500 00014 (v00 ACPIAM)
[    0.000000] ACPI: RSDT 17fd0000 00038 (v01 A M I  OEMRSDT  06000602 MSFT 00000097)
[    0.000000] ACPI: FACP 17fd0200 00081 (v01 A M I  OEMFACP  06000602 MSFT 00000097)
[    0.000000] ACPI: DSDT 17fd0400 04D48 (v01  410M1 410M1602 00000602 INTL 02002026)
[    0.000000] ACPI: FACS 17fdf000 00040
[    0.000000] ACPI: APIC 17fd0390 0006C (v01 A M I  OEMAPIC  06000602 MSFT 00000097)
[    0.000000] ACPI: SSDT 17fd5150 0007B (v01 OEM_ID OEMTBLID 00000001 INTL 02002026)
[    0.000000] ACPI: OEMB 17fdf040 00040 (v01 A M I  AMI_OEM  06000602 MSFT 00000097)
[    0.000000] ACPI: MCFG 17fd51d0 0003C (v01 A M I  OEMMCFG  06000602 MSFT 00000097)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] 0MB HIGHMEM available.
[    0.000000] 383MB LOWMEM available.
[    0.000000]   mapped low ram: 0 - 17fd0000
[    0.000000]   low ram: 0 - 17fd0000
[    0.000000]   node 0 low ram: 00000000 - 17fd0000
[    0.000000]   node 0 bootmap 00016000 - 00018ffc
[    0.000000] (10 early reservations) ==> bootmem [0000000000 - 0017fd0000]
[    0.000000]   #0 [0000000000 - 0000001000]   BIOS data page ==> [0000000000 - 0000001000]
[    0.000000]   #1 [0000001000 - 0000002000]    EX TRAMPOLINE ==> [0000001000 - 0000002000]
[    0.000000]   #2 [0000100000 - 000090e65c]    TEXT DATA BSS ==> [0000100000 - 000090e65c]
[    0.000000]   #3 [001182e000 - 001201bc21]          RAMDISK ==> [001182e000 - 001201bc21]
[    0.000000]   #4 [000009fc00 - 0000100000]    BIOS reserved ==> [000009fc00 - 0000100000]
[    0.000000]   #5 [000090f000 - 0000912189]              BRK ==> [000090f000 - 0000912189]
[    0.000000]   #6 [0000010000 - 0000011000]       TRAMPOLINE ==> [0000010000 - 0000011000]
[    0.000000]   #7 [0000011000 - 0000015000]      ACPI WAKEUP ==> [0000011000 - 0000015000]
[    0.000000]   #8 [0000015000 - 0000016000]          PGTABLE ==> [0000015000 - 0000016000]
[    0.000000]   #9 [0000016000 - 0000019000]          BOOTMAP ==> [0000016000 - 0000019000]
[    0.000000] Zone PFN ranges:
[    0.000000]   DMA      0x00000010 -> 0x00001000
[    0.000000]   Normal   0x00001000 -> 0x00017fd0
[    0.000000]   HighMem  0x00017fd0 -> 0x00017fd0
[    0.000000] Movable zone start PFN for each node
[    0.000000] early_node_map[2] active PFN ranges
[    0.000000]     0: 0x00000010 -> 0x0000009f
[    0.000000]     0: 0x00000100 -> 0x00017fd0
[    0.000000] On node 0 totalpages: 98143
[    0.000000] free_area_init_node: node 0, pgdat c07be280, node_mem_map c1001200
[    0.000000]   DMA zone: 32 pages used for memmap
[    0.000000]   DMA zone: 0 pages reserved
[    0.000000]   DMA zone: 3951 pages, LIFO batch:0
[    0.000000]   Normal zone: 736 pages used for memmap
[    0.000000]   Normal zone: 93424 pages, LIFO batch:31
[    0.000000] Using APIC driver default
[    0.000000] ACPI: PM-Timer IO Port: 0x4008
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled)
[    0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] SMP: Allowing 4 CPUs, 2 hotplug CPUs
[    0.000000] nr_irqs_gsi: 24
[    0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[    0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e4000
[    0.000000] PM: Registered nosave memory: 00000000000e4000 - 0000000000100000
[    0.000000] Allocating PCI resources starting at 18000000 (gap: 18000000:e6e00000)
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:4 nr_node_ids:1
[    0.000000] PERCPU: Embedded 14 pages/cpu @c1400000 s36184 r0 d21160 u1048576
[    0.000000] pcpu-alloc: s36184 r0 d21160 u1048576 alloc=1*4194304
[    0.000000] pcpu-alloc: [0] 0 1 2 3 
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 97375
[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.33-02063303-generic root=UUID=ae02ece1-192f-4996-8067-144aaa760f93 ro quiet quiet splash
[    0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
[    0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.000000] Enabling fast FPU save and restore... done.
[    0.000000] Enabling unmasked SIMD FPU exception support... done.
[    0.000000] Initializing CPU#0
[    0.000000] allocated 1964800 bytes of page_cgroup
[    0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[    0.000000] Initializing HighMem for node 0 (00000000:00000000)
[    0.000000] Memory: 370008k/393024k available (4733k kernel code, 22044k reserved, 2215k data, 708k init, 0k highmem)
[    0.000000] virtual kernel memory layout:
[    0.000000]     fixmap  : 0xfff1d000 - 0xfffff000   ( 904 kB)
[    0.000000]     pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
[    0.000000]     vmalloc : 0xd87d0000 - 0xff7fe000   ( 624 MB)
[    0.000000]     lowmem  : 0xc0000000 - 0xd7fd0000   ( 383 MB)
[    0.000000]       .init : 0xc07ca000 - 0xc087b000   ( 708 kB)
[    0.000000]       .data : 0xc059f54c - 0xc07c9208   (2215 kB)
[    0.000000]       .text : 0xc0100000 - 0xc059f54c   (4733 kB)
[    0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[    0.000000] SLUB: Genslabs=13, HWalign=128, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.000000] Hierarchical RCU implementation.
[    0.000000] NR_IRQS:2304 nr_irqs:440
[    0.000000] Console: colour VGA+ 80x25
[    0.000000] console [tty0] enabled
[    0.000000] Fast TSC calibration failed
[    0.000000] TSC: Unable to calibrate against PIT
[    0.000000] TSC: using PMTIMER reference calibration
[    0.000000] Detected 3058.474 MHz processor.
[    0.016006] Calibrating delay loop (skipped), value calculated using timer frequency.. 6116.94 BogoMIPS (lpj=12233896)
[    0.016033] Security Framework initialized
[    0.016041] SELinux:  Disabled at boot.
[    0.016052] Mount-cache hash table entries: 512
[    0.016256] Initializing cgroup subsys ns
[    0.016261] Initializing cgroup subsys cpuacct
[    0.016268] Initializing cgroup subsys memory
[    0.016280] Initializing cgroup subsys devices
[    0.016285] Initializing cgroup subsys freezer
[    0.016288] Initializing cgroup subsys net_cls
[    0.016324] CPU: Physical Processor ID: 0
[    0.016327] CPU: Processor Core ID: 0
[    0.016333] mce: CPU supports 4 MCE banks
[    0.016349] CPU0: Thermal monitoring enabled (TM2)
[    0.016355] using mwait in idle threads.
[    0.016366] Performance Events: no PMU driver, software events only.
[    0.016375] Checking 'hlt' instruction... OK.
[    0.037066] ACPI: Core revision 20091214
[    0.051535] ftrace: converting mcount calls to 0f 1f 44 00 00
[    0.051544] ftrace: allocating 25678 entries in 51 pages
[    0.056106] Enabling APIC mode:  Flat.  Using 1 I/O APICs
[    0.056986] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.097798] CPU0: Intel(R) Pentium(R) 4 CPU 3.06GHz stepping 09
[    0.100000] Booting Node   0, Processors  #1
[    0.020000] Initializing CPU#1
[    0.188000] TSC synchronization [CPU#0 -> CPU#1]:
[    0.188000] Measured 1035763933 cycles TSC warp between CPUs, turning off TSC clock.
[    0.188000] Marking TSC unstable due to check_tsc_sync_source failed
[    0.188035] Brought up 2 CPUs
[    0.188040] Total of 2 processors activated (12172.51 BogoMIPS).
[    0.188760] devtmpfs: initialized
[    0.188760] regulator: core version 0.5
[    0.188760] Time: 13:05:44  Date: 05/01/10
[    0.188760] NET: Registered protocol family 16
[    0.188760] EISA bus registered
[    0.188760] ACPI: bus type pci registered
[    0.188760] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[    0.188760] PCI: not using MMCONFIG
[    0.188760] PCI: PCI BIOS revision 2.10 entry at 0xf0031, last bus=2
[    0.188760] PCI: Using configuration type 1 for base access
[    0.189652] bio: create slab <bio-0> at 0
[    0.193597] ACPI: EC: Look up EC in DSDT
[    0.204301] ACPI: Executed 1 blocks of module-level executable AML code
[    0.218382] ACPI: Interpreter enabled
[    0.218390] ACPI: (supports S0 S3 S4 S5)
[    0.218423] ACPI: Using IOAPIC for interrupt routing
[    0.218625] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[    0.233407] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
[    0.233411] PCI: Using MMCONFIG for extended config space
[    0.253659] ACPI Warning: Incorrect checksum in table [OEMB] - 20, should be 11 (20091214/tbutils-314)
[    0.253866] ACPI: No dock devices found.
[    0.254040] ACPI: PCI Root Bridge [PCI0] (0000:00)
[    0.254077] pci_root PNP0A03:00: ignoring host bridge windows from ACPI; boot with "pci=use_crs" to use them
[    0.254381] pci_root PNP0A03:00: host bridge window [io  0x0000-0x0cf7] (ignored)
[    0.254385] pci_root PNP0A03:00: host bridge window [io  0x0d00-0xffff] (ignored)
[    0.254389] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
[    0.254393] pci_root PNP0A03:00: host bridge window [mem 0x18000000-0xffffffff] (ignored)
[    0.254437] pci 0000:00:00.0: reg 1c: [mem 0xe0000000-0xffffffff 64bit]
[    0.254681] pci 0000:00:1c.0: reg 10: [mem 0xff6ff000-0xff6fffff]
[    0.254770] pci 0000:00:1c.1: reg 10: [mem 0xff6fe000-0xff6fefff]
[    0.254859] pci 0000:00:1c.2: reg 10: [mem 0xff6fd000-0xff6fdfff]
[    0.254966] pci 0000:00:1c.3: reg 10: [mem 0xff6fcc00-0xff6fccff]
[    0.255053] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[    0.255060] pci 0000:00:1c.3: PME# disabled
[    0.255131] pci 0000:00:1d.0: reg 10: [mem 0xff6f8000-0xff6fbfff 64bit]
[    0.255201] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[    0.255208] pci 0000:00:1d.0: PME# disabled
[    0.255405] pci 0000:00:1e.1: quirk: [io  0x4000-0x403f] claimed by ali7101 ACPI
[    0.255504] pci 0000:00:1f.0: reg 20: [io  0xff00-0xff0f]
[    0.256069] pci 0000:00:1f.1: reg 10: [io  0xec00-0xec0f]
[    0.256080] pci 0000:00:1f.1: reg 14: [io  0xe800-0xe807]
[    0.256091] pci 0000:00:1f.1: reg 18: [io  0xe400-0xe40f]
[    0.256102] pci 0000:00:1f.1: reg 1c: [io  0xe000-0xe007]
[    0.256113] pci 0000:00:1f.1: reg 20: [io  0xdc00-0xdc1f]
[    0.256124] pci 0000:00:1f.1: reg 24: [mem 0xff6fc800-0xff6fcbff]
[    0.256165] pci 0000:00:1f.1: PME# supported from D3hot
[    0.256172] pci 0000:00:1f.1: PME# disabled
[    0.256236] pci 0000:01:05.0: reg 10: [mem 0xc0000000-0xcfffffff pref]
[    0.256244] pci 0000:01:05.0: reg 14: [io  0xb800-0xb8ff]
[    0.256251] pci 0000:01:05.0: reg 18: [mem 0xff4f0000-0xff4fffff]
[    0.256270] pci 0000:01:05.0: reg 30: [mem 0xff4c0000-0xff4dffff pref]
[    0.256292] pci 0000:01:05.0: supports D1 D2
[    0.256328] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[    0.256335] pci 0000:00:01.0:   bridge window [io  0xb000-0xbfff]
[    0.256340] pci 0000:00:01.0:   bridge window [mem 0xff400000-0xff4fffff]
[    0.256345] pci 0000:00:01.0:   bridge window [mem 0xbff00000-0xdfefffff pref]
[    0.256466] pci 0000:02:15.0: reg 10: [mem 0xff5fc000-0xff5fffff]
[    0.256479] pci 0000:02:15.0: reg 14: [io  0xc800-0xc8ff]
[    0.256528] pci 0000:02:15.0: reg 30: [mem 0xff5c0000-0xff5dffff pref]
[    0.256574] pci 0000:02:15.0: supports D1 D2
[    0.256576] pci 0000:02:15.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.256584] pci 0000:02:15.0: PME# disabled
[    0.256643] pci 0000:02:16.0: reg 10: [mem 0xff5fb800-0xff5fbfff]
[    0.256656] pci 0000:02:16.0: reg 14: [io  0xcc00-0xcc7f]
[    0.256740] pci 0000:02:16.0: supports D2
[    0.256743] pci 0000:02:16.0: PME# supported from D2 D3hot D3cold
[    0.256750] pci 0000:02:16.0: PME# disabled
[    0.256784] pci 0000:00:19.0: PCI bridge to [bus 02-02]
[    0.256792] pci 0000:00:19.0:   bridge window [io  0xc000-0xcfff]
[    0.256800] pci 0000:00:19.0:   bridge window [mem 0xff500000-0xff5fffff]
[    0.256821] pci_bus 0000:00: on NUMA node 0
[    0.256827] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[    0.256953] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
[    0.257064] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PE2P._PRT]
[    0.271548] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 11 12 14 *15), disabled.
[    0.271820] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[    0.272107] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[    0.272381] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[    0.272653] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[    0.272925] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[    0.273200] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[    0.273471] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[    0.273742] ACPI: PCI Interrupt Link [LNKP] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[    0.273913] vgaarb: device added: PCI:0000:01:05.0,decodes=io+mem,owns=io+mem,locks=none
[    0.273920] vgaarb: loaded
[    0.274089] SCSI subsystem initialized
[    0.274155] libata version 3.00 loaded.
[    0.274155] usbcore: registered new interface driver usbfs
[    0.274155] usbcore: registered new interface driver hub
[    0.274155] usbcore: registered new device driver usb
[    0.274155] ACPI: WMI: Mapper loaded
[    0.274155] PCI: Using ACPI for IRQ routing
[    0.274155] PCI: pci_cache_line_size set to 64 bytes
[    0.274155] pci 0000:00:00.0: address space collision: [mem 0xe0000000-0xffffffff 64bit] already in use
[    0.274155] pci 0000:00:00.0: can't reserve [mem 0xe0000000-0xffffffff 64bit]
[    0.274155] NetLabel: Initializing
[    0.274155] NetLabel:  domain hash size = 128
[    0.274155] NetLabel:  protocols = UNLABELED CIPSOv4
[    0.274155] NetLabel:  unlabeled traffic allowed by default
[    0.278047] pnp: PnP ACPI init
[    0.278068] ACPI: bus type pnp registered
[    0.289956] pnp 00:0f: disabling [mem 0x00000000-0x0009ffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
[    0.289962] pnp 00:0f: disabling [mem 0x000c0000-0x000dffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
[    0.289967] pnp 00:0f: disabling [mem 0x000e0000-0x000fffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
[    0.289973] pnp 00:0f: disabling [mem 0x00100000-0x17ffffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
[    0.290561] pnp: PnP ACPI: found 16 devices
[    0.290565] ACPI: ACPI bus type pnp unregistered
[    0.290570] PnPBIOS: Disabled by ACPI PNP
[    0.290594] system 00:0b: [io  0x0a00-0x0a0f] has been reserved
[    0.290598] system 00:0b: [io  0x0a10-0x0a1f] has been reserved
[    0.290602] system 00:0b: [io  0x0a20-0x0a2f] has been reserved
[    0.290605] system 00:0b: [io  0x0a30-0x0a3f] has been reserved
[    0.290615] system 00:0c: [io  0x028d-0x028e] has been reserved
[    0.290619] system 00:0c: [io  0x0480-0x048f] has been reserved
[    0.290623] system 00:0c: [io  0x04d0-0x04d1] has been reserved
[    0.290628] system 00:0c: [mem 0xff380000-0xff3fffff] has been reserved
[    0.290632] system 00:0c: [mem 0xfff80000-0xffffffff] has been reserved
[    0.290635] system 00:0c: [mem 0xffb00000-0xffbfffff] has been reserved
[    0.290639] system 00:0c: [mem 0xfeb00000-0xfeb00fff] has been reserved
[    0.290643] system 00:0c: [mem 0xff780000-0xff7fffff] has been reserved
[    0.290652] system 00:0d: [mem 0xfec00000-0xfec00fff] could not be reserved
[    0.290656] system 00:0d: [mem 0xfee00000-0xfee00fff] has been reserved
[    0.290664] system 00:0e: [mem 0xe0000000-0xefffffff] has been reserved
[    0.325468] Switching to clocksource acpi_pm
[    0.325552] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[    0.325552] pci 0000:00:01.0:   bridge window [io  0xb000-0xbfff]
[    0.325552] pci 0000:00:01.0:   bridge window [mem 0xff400000-0xff4fffff]
[    0.325552] pci 0000:00:01.0:   bridge window [mem 0xbff00000-0xdfefffff pref]
[    0.325552] pci 0000:00:19.0: PCI bridge to [bus 02-02]
[    0.325552] pci 0000:00:19.0:   bridge window [io  0xc000-0xcfff]
[    0.325552] pci 0000:00:19.0:   bridge window [mem 0xff500000-0xff5fffff]
[    0.325552] pci 0000:00:19.0:   bridge window [mem pref disabled]
[    0.325552] pci 0000:00:19.0: setting latency timer to 64
[    0.325552] pci_bus 0000:00: resource 0 [io  0x0000-0xffff]
[    0.325552] pci_bus 0000:00: resource 1 [mem 0x00000000-0xffffffff]
[    0.325552] pci_bus 0000:01: resource 0 [io  0xb000-0xbfff]
[    0.325552] pci_bus 0000:01: resource 1 [mem 0xff400000-0xff4fffff]
[    0.325552] pci_bus 0000:01: resource 2 [mem 0xbff00000-0xdfefffff pref]
[    0.325552] pci_bus 0000:02: resource 0 [io  0xc000-0xcfff]
[    0.325552] pci_bus 0000:02: resource 1 [mem 0xff500000-0xff5fffff]
[    0.325552] NET: Registered protocol family 2
[    0.325552] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
[    0.325552] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
[    0.325552] TCP bind hash table entries: 16384 (order: 5, 131072 bytes)
[    0.325552] TCP: Hash tables configured (established 16384 bind 16384)
[    0.325552] TCP reno registered
[    0.325552] UDP hash table entries: 256 (order: 1, 8192 bytes)
[    0.325552] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
[    0.325552] NET: Registered protocol family 1
[    0.325552] pci 0000:00:00.0: MSI quirk detected; MSI disabled
[    0.325552] pci 0000:00:19.0: Disabling HT MSI Mapping
[    0.800106] PCI: CLS mismatch (64 != 512), using 64 bytes
[    0.800113] pci 0000:01:05.0: Boot video device
[    0.800194] Trying to unpack rootfs image as initramfs...
[    1.094158] Freeing initrd memory: 8119k freed
[    1.104504] cpufreq-nforce2: No nForce2 chipset.
[    1.104556] Scanning for low memory corruption every 60 seconds
[    1.104756] audit: initializing netlink socket (disabled)
[    1.104781] type=2000 audit(1272719145.104:1): initialized
[    1.115504] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[    1.117491] VFS: Disk quotas dquot_6.5.2
[    1.117570] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    1.118401] fuse init (API version 7.13)
[    1.118529] msgmni has been set to 739
[    1.118901] alg: No test for stdrng (krng)
[    1.118994] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[    1.119000] io scheduler noop registered
[    1.119002] io scheduler deadline registered
[    1.119086] io scheduler cfq registered (default)
[    1.119259] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    1.119292] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    1.119501] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[    1.119507] ACPI: Power Button [PWRB]
[    1.119582] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[    1.119587] ACPI: Power Button [PWRF]
[    1.129812] isapnp: Scanning for PnP cards...
[    1.481427] isapnp: No Plug & Play device found
[    1.483533] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    1.483708] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[    1.483862] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[    1.484369] 00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[    1.484616] 00:08: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[    1.486302] brd: module loaded
[    1.487006] loop: module loaded
[    1.487149] input: Macintosh mouse button emulation as /devices/virtual/input/input2
[    1.487359]   alloc irq_desc for 21 on node -1
[    1.487363]   alloc kstat_irqs on node -1
[    1.487376] pata_acpi 0000:00:1f.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
[    1.487453] pata_acpi 0000:00:1f.0: PCI INT A disabled
[    1.487905] Fixed MDIO Bus: probed
[    1.487954] PPP generic driver version 2.4.2
[    1.488028] tun: Universal TUN/TAP device driver, 1.6
[    1.488032] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[    1.488150] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.488177]   alloc irq_desc for 23 on node -1
[    1.488180]   alloc kstat_irqs on node -1
[    1.488187] ehci_hcd 0000:00:1c.3: PCI INT D -> GSI 23 (level, low) -> IRQ 23
[    1.488214] ehci_hcd 0000:00:1c.3: EHCI Host Controller
[    1.488262] ehci_hcd 0000:00:1c.3: new USB bus registered, assigned bus number 1
[    1.488311] ehci_hcd 0000:00:1c.3: debug port 1
[    1.508070] ehci_hcd 0000:00:1c.3: irq 23, io mem 0xff6fcc00
[    1.520033] ehci_hcd 0000:00:1c.3: USB 2.0 started, EHCI 1.00
[    1.520208] hub 1-0:1.0: USB hub found
[    1.520216] hub 1-0:1.0: 8 ports detected
[    1.520322] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    1.520341]   alloc irq_desc for 17 on node -1
[    1.520344]   alloc kstat_irqs on node -1
[    1.520351] ohci_hcd 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[    1.520366] ohci_hcd 0000:00:1c.0: OHCI Host Controller
[    1.520422] ohci_hcd 0000:00:1c.0: new USB bus registered, assigned bus number 2
[    1.520464] ohci_hcd 0000:00:1c.0: irq 17, io mem 0xff6ff000
[    1.578143] hub 2-0:1.0: USB hub found
[    1.578153] hub 2-0:1.0: 3 ports detected
[    1.578219]   alloc irq_desc for 18 on node -1
[    1.578222]   alloc kstat_irqs on node -1
[    1.578228] ohci_hcd 0000:00:1c.1: PCI INT B -> GSI 18 (level, low) -> IRQ 18
[    1.578242] ohci_hcd 0000:00:1c.1: OHCI Host Controller
[    1.578289] ohci_hcd 0000:00:1c.1: new USB bus registered, assigned bus number 3
[    1.578329] ohci_hcd 0000:00:1c.1: irq 18, io mem 0xff6fe000
[    1.634142] hub 3-0:1.0: USB hub found
[    1.634154] hub 3-0:1.0: 3 ports detected
[    1.634220]   alloc irq_desc for 19 on node -1
[    1.634223]   alloc kstat_irqs on node -1
[    1.634230] ohci_hcd 0000:00:1c.2: PCI INT C -> GSI 19 (level, low) -> IRQ 19
[    1.634244] ohci_hcd 0000:00:1c.2: OHCI Host Controller
[    1.634301] ohci_hcd 0000:00:1c.2: new USB bus registered, assigned bus number 4
[    1.634341] ohci_hcd 0000:00:1c.2: irq 19, io mem 0xff6fd000
[    1.690154] hub 4-0:1.0: USB hub found
[    1.690164] hub 4-0:1.0: 3 ports detected
[    1.690233] uhci_hcd: USB Universal Host Controller Interface driver
[    1.690356] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
[    1.692791] serio: i8042 KBD port at 0x60,0x64 irq 1
[    1.692803] serio: i8042 AUX port at 0x60,0x64 irq 12
[    1.692979] mice: PS/2 mouse device common for all mice
[    1.693158] rtc_cmos 00:02: RTC can wake from S4
[    1.693216] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[    1.693264] rtc0: alarms up to one month, 114 bytes nvram
[    1.693404] device-mapper: uevent: version 1.0.3
[    1.693600] device-mapper: ioctl: 4.17.0-ioctl (2010-03-05) initialised: dm-devel@redhat.com
[    1.693743] device-mapper: multipath: version 1.1.1 loaded
[    1.693748] device-mapper: multipath round-robin: version 1.0.0 loaded
[    1.693923] EISA: Probing bus 0 at eisa.0
[    1.693951] Cannot allocate resource for EISA slot 4
[    1.693978] EISA: Detected 0 cards.
[    1.694155] cpuidle: using governor ladder
[    1.694158] cpuidle: using governor menu
[    1.694690] TCP cubic registered
[    1.694860] NET: Registered protocol family 10
[    1.695468] lo: Disabled Privacy Extensions
[    1.695850] NET: Registered protocol family 17
[    1.695944] Using IPI No-Shortcut mode
[    1.696076] PM: Resume from disk failed.
[    1.696096] registered taskstats version 1
[    1.696352]   Magic number: 10:956:77
[    1.696492] rtc_cmos 00:02: setting system clock to 2010-05-01 13:05:46 UTC (1272719146)
[    1.696524] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    1.696527] EDD information not available.
[    1.696596] Freeing unused kernel memory: 708k freed
[    1.697453] Write protecting the kernel text: 4736k
[    1.697514] Write protecting the kernel read-only data: 1924k
[    1.719772] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
[    1.721990] udev: starting version 151
[    1.856810] sata_uli 0000:00:1f.1: version 1.3
[    1.856856] sata_uli 0000:00:1f.1: PCI INT A -> GSI 21 (level, low) -> IRQ 21
[    1.873571]   alloc irq_desc for 20 on node -1
[    1.873580]   alloc kstat_irqs on node -1
[    1.873596] skge 0000:02:15.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[    1.873694] skge 1.13 addr 0xff5fc000 irq 20 chip Yukon-Lite rev 9
[    1.875036] skge eth0: addr 00:16:ec:9f:83:9a
[    1.890778] scsi0 : sata_uli
[    1.913273] scsi1 : sata_uli
[    1.921016] scsi2 : sata_uli
[    1.926164] scsi3 : sata_uli
[    1.926346] ata1: SATA max UDMA/133 cmd 0xec00 ctl 0xe800 bmdma 0xdc00 irq 21
[    1.926354] ata2: SATA max UDMA/133 cmd 0xe400 ctl 0xe000 bmdma 0xdc08 irq 21
[    1.926362] ata3: SATA max UDMA/133 cmd 0xec08 ctl 0xe806 bmdma 0xdc10 cmd 0xe409 ctl 0xe006 bmdma 0xdc18 irq 21
[    1.926375] ata4: SATA max UDMA/133 irq 21
[    1.926478] pata_ali 0000:00:1f.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
[    1.954980] scsi4 : pata_ali
[    1.956383] ohci1394 0000:02:16.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[    1.965999] scsi5 : pata_ali
[    1.970274] ata5: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xff00 irq 14
[    1.970279] ata6: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xff08 irq 15
[    1.988091] FDC 0 is a post-1991 82077
[    2.014058] ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[23]  MMIO=[ff5fb800-ff5fbfff]  Max Packet=[2048]  IR/IT contexts=[4/8]
[    2.064042] usb 4-1: new full speed USB device using ohci_hcd and address 2
[    2.148414] ata5.00: ATAPI: LITE-ON DVDRW SHW-160P6S, PRS2, max UDMA/66
[    2.148446] ata5.00: WARNING: ATAPI DMA disabled for reliability issues.  It can be enabled
[    2.148449] ata5.00: WARNING: via pata_ali.atapi_dma modparam or corresponding sysfs node.
[    2.180347] ata5.00: configured for UDMA/66
[    2.291033] Initializing USB Mass Storage driver...
[    2.291281] scsi6 : usb-storage 4-1:1.0
[    2.291460] usbcore: registered new interface driver usb-storage
[    2.291465] USB Mass Storage support registered.
[    2.392106] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    2.400602] ata1.00: ATA-7: WDC WD1600JS-22NCB1, 10.02E02, max UDMA/133
[    2.400606] ata1.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 0/32)
[    2.408617] ata1.00: configured for UDMA/133
[    2.408792] scsi 0:0:0:0: Direct-Access     ATA      WDC WD1600JS-22N 10.0 PQ: 0 ANSI: 5
[    2.409135] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    2.409356] sd 0:0:0:0: [sda] 312581808 512-byte logical blocks: (160 GB/149 GiB)
[    2.409456] sd 0:0:0:0: [sda] Write Protect is off
[    2.409461] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    2.409501] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    2.409739]  sda: sda1 sda2 sda3 sda4 < sda5 sda6 >
[    2.449751] sd 0:0:0:0: [sda] Attached SCSI disk
[    3.288872] ieee1394: Host added: ID:BUS[0-00:1023]  GUID[00000ae6ff55c3b8]
[    3.345102] scsi 4:0:0:0: CD-ROM            LITE-ON  DVDRW SHW-160P6S PRS2 PQ: 0 ANSI: 5
[    3.349667] sr0: scsi3-mmc drive: 48x/48x writer cd/rw xa/form2 cdda tray
[    3.349672] Uniform CD-ROM driver Revision: 3.20
[    3.349860] sr 4:0:0:0: Attached scsi CD-ROM sr0
[    3.349999] sr 4:0:0:0: Attached scsi generic sg1 type 5
[    4.109944] EXT4-fs (sda3): mounted filesystem with ordered data mode
[    5.578909] Adding 1020088k swap on /dev/sda5.  Priority:-1 extents:1 across:1020088k 
[    6.223870] udev: starting version 151
[    6.971560] ali1535_smbus 0000:00:1e.1: ALI1535_smb region uninitialized - upgrade BIOS?
[    6.971568] ali1535_smbus 0000:00:1e.1: ALI1535 not detected, module not inserted.
[    7.070245] parport_pc 00:0a: reported by Plug and Play ACPI
[    7.070390] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,ECP,DMA]
[    7.073844] ali15x3_smbus 0000:00:1e.1: ALI15X3_smb region uninitialized - upgrade BIOS or use force_addr=0xaddr
[    7.073936] ali15x3_smbus 0000:00:1e.1: ALI15X3 not detected, module not inserted.
[    7.217752] lp0: using parport0 (interrupt-driven).
[    7.297847] scsi 6:0:0:0: Direct-Access     Generic  USB SD Reader    1.00 PQ: 0 ANSI: 0
[    7.304179] scsi 6:0:0:1: Direct-Access     Generic  USB CF Reader    1.01 PQ: 0 ANSI: 0
[    7.311184] scsi 6:0:0:2: Direct-Access     Generic  USB SM Reader    1.02 PQ: 0 ANSI: 0
[    7.318205] scsi 6:0:0:3: Direct-Access     Generic  USB MS Reader    1.03 PQ: 0 ANSI: 0
[    7.322054] sd 6:0:0:0: Attached scsi generic sg2 type 0
[    7.322888] sd 6:0:0:1: Attached scsi generic sg3 type 0
[    7.325779] sd 6:0:0:2: Attached scsi generic sg4 type 0
[    7.327492] sd 6:0:0:3: Attached scsi generic sg5 type 0
[    7.400270] ppdev: user-space parallel port driver
[    7.448171] sd 6:0:0:0: [sdb] Attached SCSI removable disk
[    7.470161] sd 6:0:0:1: [sdc] Attached SCSI removable disk
[    7.516172] sd 6:0:0:3: [sde] Attached SCSI removable disk
[    7.527157] sd 6:0:0:2: [sdd] Attached SCSI removable disk
[    7.544589] Linux agpgart interface v0.103
[    7.617920] ip_tables: (C) 2000-2006 Netfilter Core Team
[    7.637596] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[    7.763067] psmouse serio1: ID: 10 00 64
[    7.875987] nf_conntrack version 0.5.0 (5927 buckets, 23708 max)
[    7.876255] CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use
[    7.876261] nf_conntrack.acct=1 kernel parameter, acct=1 nf_conntrack module option or
[    7.876265] sysctl net.netfilter.nf_conntrack_acct=1 to enable it.
[    8.031143] [drm] Initialized drm 1.1.0 20060810
[    8.250878] it87: Found IT8712F chip at 0xa10, revision 7
[    8.250904] it87: in3 is VCC (+5V)
[    8.250907] it87: in7 is VCCH (+5V Stand-By)
[    8.321051] input: ImPS/2 Generic Wheel Mouse as /devices/platform/i8042/serio1/input/input4
[    8.522150] [drm] radeon defaulting to kernel modesetting.
[    8.522160] [drm] radeon kernel modesetting enabled.
[    8.523013] radeon 0000:01:05.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[    8.526462] [drm] radeon: Initializing kernel modesetting.
[    8.527166] [drm] register mmio base: 0xFF4F0000
[    8.527170] [drm] register mmio size: 65536
[    8.530373] [drm] GPU reset succeed (RBBM_STATUS=0x00000140)
[    8.531664] [drm:rs400_gart_adjust_size] *ERROR* Forcing to 32M GART size (because of ASIC bug ?)
[    8.531743] [drm] Generation 2 PCI interface, using max accessible memory
[    8.531750] [drm] radeon: VRAM 128M
[    8.531754] [drm] radeon: VRAM from 0x18000000 to 0x1FFFFFFF
[    8.531758] [drm] radeon: GTT 32M
[    8.531761] [drm] radeon: GTT from 0x20000000 to 0x21FFFFFF
[    8.531811] [drm] radeon: irq initialized.
[    8.532294] [drm] Detected VRAM RAM=128M, BAR=256M
[    8.532301] [drm] RAM width 128bits DDR
[    8.532447] [TTM] Zone  kernel: Available graphics memory: 189678 kiB.
[    8.532476] [drm] radeon: 128M of VRAM memory ready
[    8.532481] [drm] radeon: 32M of GTT memory ready.
[    8.532516] [drm] GART: num cpu pages 8192, num gpu pages 8192
[    8.534437] [drm] radeon: 4 quad pipes, 1 z pipes initialized.
[    8.534461] [drm] radeon: cp idle (0x10000C03)
[    8.534538] [drm] Loading R300 Microcode
[    8.535441] platform radeon_cp.0: firmware: requesting radeon/R300_cp.bin
[    8.841467] [drm] radeon: ring at 0x0000000020000000
[    8.841493] [drm] ring test succeeded in 1 usecs
[    8.841740] [drm] radeon: ib pool ready.
[    8.841898] [drm] ib test succeeded in 0 usecs
[    8.841955] [drm] Default TV standard: NTSC
[    8.841959] [drm] 14.318180000 MHz TV ref clk
[    8.842109] [drm] Default TV standard: NTSC
[    8.842114] [drm] 14.318180000 MHz TV ref clk
[    8.842171] [drm] Radeon Display Connectors
[    8.842175] [drm] Connector 0:
[    8.842179] [drm]   VGA
[    8.842184] [drm]   DDC: 0x68 0x68 0x68 0x68 0x68 0x68 0x68 0x68
[    8.842187] [drm]   Encoders:
[    8.842190] [drm]     CRT1: INTERNAL_DAC2
[    8.842194] [drm] Connector 1:
[    8.842196] [drm]   S-video
[    8.842199] [drm]   Encoders:
[    8.842202] [drm]     TV1: INTERNAL_DAC2
[    8.902380]   alloc irq_desc for 22 on node -1
[    8.902386]   alloc kstat_irqs on node -1
[    8.902400] HDA Intel 0000:00:1d.0: PCI INT C -> GSI 22 (level, low) -> IRQ 22
[    8.956151] [drm] fb mappable at 0xC0040000
[    8.956156] [drm] vram apper at 0xC0000000
[    8.956159] [drm] size 5184000
[    8.956161] [drm] fb depth is 24
[    8.956163] [drm]    pitch is 5760
[    8.956307] fb0: radeondrmfb frame buffer device
[    8.956311] registered panic notifier
[    8.956323] [drm] Initialized radeon 2.0.0 20080528 for 0000:01:05.0 on minor 0
[    9.184192] ip6_tables: (C) 2000-2006 Netfilter Core Team
[    9.344953] hda_codec: ALC880: BIOS auto-probing.
[    9.346772] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1d.0/input/input5
[    9.981755] Console: switching to colour frame buffer device 180x56
[   12.209542] EXT4-fs (sda6): mounted filesystem with ordered data mode
[   16.001120] skge eth0: enabling interface
[   16.004746] ADDRCONF(NETDEV_UP): eth0: link is not ready
[   17.761459] skge eth0: Link is up at 100 Mbps, full duplex, flow control both
[   17.761546] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready

Linux tout seul sur le disque dur  Acer Aspire T650 :=))
RAM: 1,7 Gio, CPU: Intel® Pentium(R) 4 CPU 3.06GHz × 2. Carte graphique Gallium 0.4 on ATI RC410 (Radeon Xpress200)
Partition 1: Debian Jessie & Gnome Version 3.12, Kernel  3.16.3-031603-generic
Partition 2: Ubuntu Trusty 14.04 & Unity

Hors ligne

#15 Le 01/05/2010, à 16:23

Emetryon

Re : Lucid : Démarrage encore plus lent qu'avant ?

http://doc.ubuntu-fr.org/plymouth#augmenter_la_resolution

Apparemment ce n'est plus Usplash mais Plymouth qui s'occuperai du splash après Le grub...

Hors ligne

#16 Le 02/05/2010, à 15:15

tmeg57

Re : Lucid : Démarrage encore plus lent qu'avant ?

Emetryon a écrit :

Même problème après migration de Karmic à Lucid. après Choix dans le Grub, écran noir avec " _ " clignotant en haut . Puis un Ubuntu chargeant d'un violet du plus mauvais gout. 40 Sec de boot avant écran de login au lieu de 20...

si tu veux voir ce qui se passe lors du boot à la place du tiret clignotant tu édit le fichier du grub /boot/grub/menu.lst

et sur la ligne ou t'as ton ubuntu tu retire le quiet-splash à la fin

kernel          /boot/vmlinuz-2.6.32-21-generic root=UUID=5f8b9389-1187-4cc0-8242-61aa60b28272 ro quiet splash
 -> 
kernel          /boot/vmlinuz-2.6.32-21-generic root=UUID=5f8b9389-1187-4cc0-8242-61aa60b28272 ro

Dernière modification par tmeg57 (Le 02/05/2010, à 15:16)


Fixe 1 : Ubuntu Lucid Lynx 10.04 32 Bits en Machine virtuelle VMWare - Intel Core i7 860 - 8 Go de Ram - ATI Radeon Saphire 5850 - Cate Mere Gigabyte P55A-UD4
Fixe 2 : Ubuntu Lucid Lynx 10.04 32 Bits - AMD X2 64 5000+ - 2 Go de RAM - Geforce 7950 GTX2 - CM K9 Diamond
Portable : Debian Leny 5.04 32 Bits - ThinkPad T41 2373 - Pentium M 1.4 GHz - 512 Mo de Ram - ATI Mobility Radeon 7500

Hors ligne

#17 Le 02/05/2010, à 15:21

tmeg57

Re : Lucid : Démarrage encore plus lent qu'avant ?

Emetryon a écrit :

http://doc.ubuntu-fr.org/plymouth#augmenter_la_resolution

Apparemment ce n'est plus Usplash mais Plymouth qui s'occuperai du splash après Le grub...

J'ai testé la solution en bas de ta page, mais ça n'as absolument rien changé pour ma part.


Fixe 1 : Ubuntu Lucid Lynx 10.04 32 Bits en Machine virtuelle VMWare - Intel Core i7 860 - 8 Go de Ram - ATI Radeon Saphire 5850 - Cate Mere Gigabyte P55A-UD4
Fixe 2 : Ubuntu Lucid Lynx 10.04 32 Bits - AMD X2 64 5000+ - 2 Go de RAM - Geforce 7950 GTX2 - CM K9 Diamond
Portable : Debian Leny 5.04 32 Bits - ThinkPad T41 2373 - Pentium M 1.4 GHz - 512 Mo de Ram - ATI Mobility Radeon 7500

Hors ligne

#18 Le 02/05/2010, à 15:25

tmeg57

Re : Lucid : Démarrage encore plus lent qu'avant ?

grandtoubab a écrit :

consulter vos logs dans /var/log

exemple fichier dmesg

Boot en 17 secondes cool

Je veux bien mais c'est du chinoix pour moi smile

Voici mon mien :

[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Linux version 2.6.32-21-generic (buildd@rothera) (gcc version 4.4.3 (Ubuntu 4.4.3-4ubuntu5) ) #32-Ubuntu SMP Fri Apr 16 08:10:02 UTC 2010 (Ubuntu 2.6.32-21.32-generic 2.6.32.11+drm33.2)
[    0.000000] KERNEL supported cpus:
[    0.000000]   Intel GenuineIntel
[    0.000000]   AMD AuthenticAMD
[    0.000000]   NSC Geode by NSC
[    0.000000]   Cyrix CyrixInstead
[    0.000000]   Centaur CentaurHauls
[    0.000000]   Transmeta GenuineTMx86
[    0.000000]   Transmeta TransmetaCPU
[    0.000000]   UMC UMC UMC UMC
[    0.000000] BIOS-provided physical RAM map:
[    0.000000]  BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[    0.000000]  BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[    0.000000]  BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[    0.000000]  BIOS-e820: 0000000000100000 - 000000007ffd0000 (usable)
[    0.000000]  BIOS-e820: 000000007ffd0000 - 000000007ffde000 (ACPI data)
[    0.000000]  BIOS-e820: 000000007ffde000 - 0000000080000000 (ACPI NVS)
[    0.000000]  BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
[    0.000000]  BIOS-e820: 00000000fee00000 - 00000000fef00000 (reserved)
[    0.000000]  BIOS-e820: 00000000ff780000 - 0000000100000000 (reserved)
[    0.000000] DMI present.
[    0.000000] last_pfn = 0x7ffd0 max_arch_pfn = 0x100000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-EFFFF uncachable
[    0.000000]   F0000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 0000000000 mask FF80000000 write-back
[    0.000000]   1 disabled
[    0.000000]   2 disabled
[    0.000000]   3 disabled
[    0.000000]   4 disabled
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[    0.000000] e820 update range: 0000000000002000 - 0000000000006000 (usable) ==> (reserved)
[    0.000000] Scanning 1 areas for low memory corruption
[    0.000000] modified physical RAM map:
[    0.000000]  modified: 0000000000000000 - 0000000000002000 (usable)
[    0.000000]  modified: 0000000000002000 - 0000000000006000 (reserved)
[    0.000000]  modified: 0000000000006000 - 000000000009fc00 (usable)
[    0.000000]  modified: 000000000009fc00 - 00000000000a0000 (reserved)
[    0.000000]  modified: 00000000000e0000 - 0000000000100000 (reserved)
[    0.000000]  modified: 0000000000100000 - 000000007ffd0000 (usable)
[    0.000000]  modified: 000000007ffd0000 - 000000007ffde000 (ACPI data)
[    0.000000]  modified: 000000007ffde000 - 0000000080000000 (ACPI NVS)
[    0.000000]  modified: 00000000fec00000 - 00000000fec01000 (reserved)
[    0.000000]  modified: 00000000fee00000 - 00000000fef00000 (reserved)
[    0.000000]  modified: 00000000ff780000 - 0000000100000000 (reserved)
[    0.000000] initial memory mapped : 0 - 00c00000
[    0.000000] init_memory_mapping: 0000000000000000-00000000377fe000
[    0.000000] Using x86 segment limits to approximate NX protection
[    0.000000]  0000000000 - 0000400000 page 4k
[    0.000000]  0000400000 - 0037400000 page 2M
[    0.000000]  0037400000 - 00377fe000 page 4k
[    0.000000] kernel direct mapping tables up to 377fe000 @ 7000-c000
[    0.000000] RAMDISK: 37406000 - 37feff96
[    0.000000] Allocated new RAMDISK: 008de000 - 014c7f96
[    0.000000] Move RAMDISK from 0000000037406000 - 0000000037feff95 to 008de000 - 014c7f95
[    0.000000] ACPI: RSDP 000f89d0 00014 (v00 ACPIAM)
[    0.000000] ACPI: RSDT 7ffd0000 00038 (v01 A M I  OEMRSDT  10000827 MSFT 00000097)
[    0.000000] ACPI: FACP 7ffd0200 00084 (v02 A M I  OEMFACP  10000827 MSFT 00000097)
[    0.000000] ACPI: DSDT 7ffd0440 04FB4 (v01  1AAAA 1AAAA000 00000000 INTL 20051117)
[    0.000000] ACPI: FACS 7ffde000 00040
[    0.000000] ACPI: APIC 7ffd0390 00070 (v01 A M I  OEMAPIC  10000827 MSFT 00000097)
[    0.000000] ACPI: MCFG 7ffd0400 0003C (v01 A M I  OEMMCFG  10000827 MSFT 00000097)
[    0.000000] ACPI: OEMB 7ffde040 00060 (v01 A M I  AMI_OEM  10000827 MSFT 00000097)
[    0.000000] ACPI: HPET 7ffd5400 00038 (v01 A M I  OEMHPET0 10000827 MSFT 00000097)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] 1159MB HIGHMEM available.
[    0.000000] 887MB LOWMEM available.
[    0.000000]   mapped low ram: 0 - 377fe000
[    0.000000]   low ram: 0 - 377fe000
[    0.000000]   node 0 low ram: 00000000 - 377fe000
[    0.000000]   node 0 bootmap 00008000 - 0000ef00
[    0.000000] (9 early reservations) ==> bootmem [0000000000 - 00377fe000]
[    0.000000]   #0 [0000000000 - 0000001000]   BIOS data page ==> [0000000000 - 0000001000]
[    0.000000]   #1 [0000001000 - 0000002000]    EX TRAMPOLINE ==> [0000001000 - 0000002000]
[    0.000000]   #2 [0000006000 - 0000007000]       TRAMPOLINE ==> [0000006000 - 0000007000]
[    0.000000]   #3 [0000100000 - 00008d9e98]    TEXT DATA BSS ==> [0000100000 - 00008d9e98]
[    0.000000]   #4 [000009fc00 - 0000100000]    BIOS reserved ==> [000009fc00 - 0000100000]
[    0.000000]   #5 [00008da000 - 00008dd144]              BRK ==> [00008da000 - 00008dd144]
[    0.000000]   #6 [0000007000 - 0000008000]          PGTABLE ==> [0000007000 - 0000008000]
[    0.000000]   #7 [00008de000 - 00014c7f96]      NEW RAMDISK ==> [00008de000 - 00014c7f96]
[    0.000000]   #8 [0000008000 - 000000f000]          BOOTMAP ==> [0000008000 - 000000f000]
[    0.000000] found SMP MP-table at [c00ff780] ff780
[    0.000000] Zone PFN ranges:
[    0.000000]   DMA      0x00000000 -> 0x00001000
[    0.000000]   Normal   0x00001000 -> 0x000377fe
[    0.000000]   HighMem  0x000377fe -> 0x0007ffd0
[    0.000000] Movable zone start PFN for each node
[    0.000000] early_node_map[3] active PFN ranges
[    0.000000]     0: 0x00000000 -> 0x00000002
[    0.000000]     0: 0x00000006 -> 0x0000009f
[    0.000000]     0: 0x00000100 -> 0x0007ffd0
[    0.000000] On node 0 totalpages: 524139
[    0.000000] free_area_init_node: node 0, pgdat c0798720, node_mem_map c14c9000
[    0.000000]   DMA zone: 32 pages used for memmap
[    0.000000]   DMA zone: 0 pages reserved
[    0.000000]   DMA zone: 3963 pages, LIFO batch:0
[    0.000000]   Normal zone: 1744 pages used for memmap
[    0.000000]   Normal zone: 221486 pages, LIFO batch:31
[    0.000000]   HighMem zone: 2320 pages used for memmap
[    0.000000]   HighMem zone: 294594 pages, LIFO batch:31
[    0.000000] Using APIC driver default
[    0.000000] Detected use of extended apic ids on hypertransport bus
[    0.000000] ACPI: PM-Timer IO Port: 0x2008
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[    0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] ACPI: IRQ14 used by override.
[    0.000000] ACPI: IRQ15 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x10de8201 base: 0xfed00000
[    0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
[    0.000000] nr_irqs_gsi: 24
[    0.000000] PM: Registered nosave memory: 0000000000002000 - 0000000000006000
[    0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[    0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
[    0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
[    0.000000] Allocating PCI resources starting at 80000000 (gap: 80000000:7ec00000)
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2 nr_node_ids:1
[    0.000000] PERCPU: Embedded 14 pages/cpu @c2800000 s36024 r0 d21320 u2097152
[    0.000000] pcpu-alloc: s36024 r0 d21320 u2097152 alloc=1*4194304
[    0.000000] pcpu-alloc: [0] 0 1 
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 520043
[    0.000000] Kernel command line: root=UUID=5f8b9389-1187-4cc0-8242-61aa60b28272 ro 
[    0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] Enabling fast FPU save and restore... done.
[    0.000000] Enabling unmasked SIMD FPU exception support... done.
[    0.000000] Initializing CPU#0
[    0.000000] allocated 10484800 bytes of page_cgroup
[    0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[    0.000000] Initializing HighMem for node 0 (000377fe:0007ffd0)
[    0.000000] Memory: 2047676k/2096960k available (4673k kernel code, 47860k reserved, 2122k data, 656k init, 1187656k highmem)
[    0.000000] virtual kernel memory layout:
[    0.000000]     fixmap  : 0xfff1d000 - 0xfffff000   ( 904 kB)
[    0.000000]     pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
[    0.000000]     vmalloc : 0xf7ffe000 - 0xff7fe000   ( 120 MB)
[    0.000000]     lowmem  : 0xc0000000 - 0xf77fe000   ( 887 MB)
[    0.000000]       .init : 0xc07a3000 - 0xc0847000   ( 656 kB)
[    0.000000]       .data : 0xc0590613 - 0xc07a2e48   (2122 kB)
[    0.000000]       .text : 0xc0100000 - 0xc0590613   (4673 kB)
[    0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[    0.000000] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[    0.000000] Hierarchical RCU implementation.
[    0.000000] NR_IRQS:2304 nr_irqs:424
[    0.000000] spurious 8259A interrupt: IRQ7.
[    0.000000] Console: colour VGA+ 80x25
[    0.000000] console [tty0] enabled
[    0.000000] hpet clockevent registered
[    0.000000] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[    0.000000] Fast TSC calibration using PIT
[    0.000000] Detected 2600.548 MHz processor.
[    0.004005] Calibrating delay loop (skipped), value calculated using timer frequency.. 5201.09 BogoMIPS (lpj=10402192)
[    0.004121] Security Framework initialized
[    0.004190] AppArmor: AppArmor initialized
[    0.008007] Mount-cache hash table entries: 512
[    0.008174] Initializing cgroup subsys ns
[    0.008227] Initializing cgroup subsys cpuacct
[    0.008280] Initializing cgroup subsys memory
[    0.008336] Initializing cgroup subsys devices
[    0.008388] Initializing cgroup subsys freezer
[    0.008439] Initializing cgroup subsys net_cls
[    0.008505] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[    0.008558] CPU: L2 Cache: 512K (64 bytes/line)
[    0.008610] CPU: Physical Processor ID: 0
[    0.008660] CPU: Processor Core ID: 0
[    0.008713] mce: CPU supports 5 MCE banks
[    0.008772] using C1E aware idle routine
[    0.008829] Performance Events: AMD PMU driver.
[    0.008924] ... version:                0
[    0.008975] ... bit width:              48
[    0.009026] ... generic registers:      4
[    0.009077] ... value mask:             0000ffffffffffff
[    0.009128] ... max period:             00007fffffffffff
[    0.009180] ... fixed-purpose events:   0
[    0.009231] ... event mask:             000000000000000f
[    0.009284] Checking 'hlt' instruction... OK.
[    0.025934] ACPI: Core revision 20090903
[    0.033234] ftrace: converting mcount calls to 0f 1f 44 00 00
[    0.033290] ftrace: allocating 21771 entries in 43 pages
[    0.036089] Enabling APIC mode:  Flat.  Using 1 I/O APICs
[    0.036669] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.079325] CPU0: AMD Athlon(tm) 64 X2 Dual Core Processor 5000+ stepping 02
[    0.080001] Booting processor 1 APIC 0x1 ip 0x6000
[    0.008000] Initializing CPU#1
[    0.008000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[    0.008000] CPU: L2 Cache: 512K (64 bytes/line)
[    0.008000] CPU: Physical Processor ID: 0
[    0.008000] CPU: Processor Core ID: 1
[    0.164074] CPU1: AMD Athlon(tm) 64 X2 Dual Core Processor 5000+ stepping 02
[    0.164477] Brought up 2 CPUs
[    0.164528] Total of 2 processors activated (10401.05 BogoMIPS).
[    0.164782] CPU0 attaching sched-domain:
[    0.164785]  domain 0: span 0-1 level MC
[    0.164788]   groups: 0 1
[    0.164793] CPU1 attaching sched-domain:
[    0.164795]  domain 0: span 0-1 level MC
[    0.164797]   groups: 1 0
[    0.164869] devtmpfs: initialized
[    0.164869] regulator: core version 0.5
[    0.164869] Time: 15:18:35  Date: 05/02/10
[    0.164869] NET: Registered protocol family 16
[    0.164869] EISA bus registered
[    0.164869] Trying to unpack rootfs image as initramfs...
[    0.165311] ACPI: bus type pci registered
[    0.165416] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
[    0.165470] PCI: Not using MMCONFIG.
[    0.166236] PCI: PCI BIOS revision 3.00 entry at 0xf0031, last bus=13
[    0.166288] PCI: Using configuration type 1 for base access
[    0.180117] bio: create slab <bio-0> at 0
[    0.180858] ACPI: EC: Look up EC in DSDT
[    0.184604] ACPI: Executed 1 blocks of module-level executable AML code
[    0.191021] ACPI: Interpreter enabled
[    0.191074] ACPI: (supports S0 S1 S4 S5)
[    0.191302] ACPI: Using IOAPIC for interrupt routing
[    0.191392] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
[    0.195838] PCI: MCFG area at e0000000 reserved in ACPI motherboard resources
[    0.195891] PCI: Using MMCONFIG for extended config space
[    0.204096] ACPI Warning: Incorrect checksum in table [OEMB] - AA, should be A1 (20090903/tbutils-314)
[    0.204351] ACPI: No dock devices found.
[    0.204505] ACPI: PCI Root Bridge [PCI0] (0000:00)
[    0.204788] pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.204842] pci 0000:00:02.0: PME# disabled
[    0.204924] pci 0000:00:03.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.204977] pci 0000:00:03.0: PME# disabled
[    0.205058] pci 0000:00:04.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.205111] pci 0000:00:04.0: PME# disabled
[    0.205376] pci 0000:00:09.1: reg 20 io port: [0x2d00-0x2d3f]
[    0.205382] pci 0000:00:09.1: reg 24 io port: [0x2e00-0x2e3f]
[    0.205405] pci 0000:00:09.1: PME# supported from D3hot D3cold
[    0.205461] pci 0000:00:09.1: PME# disabled
[    0.205540] pci 0000:00:0a.0: reg 10 32bit mmio: [0xf9dfb000-0xf9dfbfff]
[    0.205568] pci 0000:00:0a.0: supports D1 D2
[    0.205570] pci 0000:00:0a.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.205624] pci 0000:00:0a.0: PME# disabled
[    0.205698] pci 0000:00:0a.1: reg 10 32bit mmio: [0xf9dfac00-0xf9dfacff]
[    0.205728] pci 0000:00:0a.1: supports D1 D2
[    0.205730] pci 0000:00:0a.1: PME# supported from D0 D1 D2 D3hot D3cold
[    0.205784] pci 0000:00:0a.1: PME# disabled
[    0.205869] pci 0000:00:0c.0: reg 20 io port: [0xffa0-0xffaf]
[    0.205909] pci 0000:00:0d.0: reg 10 io port: [0xb800-0xb807]
[    0.205913] pci 0000:00:0d.0: reg 14 io port: [0xb480-0xb483]
[    0.205918] pci 0000:00:0d.0: reg 18 io port: [0xb400-0xb407]
[    0.205923] pci 0000:00:0d.0: reg 1c io port: [0xb080-0xb083]
[    0.205928] pci 0000:00:0d.0: reg 20 io port: [0xb000-0xb00f]
[    0.205933] pci 0000:00:0d.0: reg 24 32bit mmio: [0xf9df9000-0xf9df9fff]
[    0.205977] pci 0000:00:0d.1: reg 10 io port: [0xac00-0xac07]
[    0.205982] pci 0000:00:0d.1: reg 14 io port: [0xa880-0xa883]
[    0.205987] pci 0000:00:0d.1: reg 18 io port: [0xa800-0xa807]
[    0.205991] pci 0000:00:0d.1: reg 1c io port: [0xa480-0xa483]
[    0.205996] pci 0000:00:0d.1: reg 20 io port: [0xa400-0xa40f]
[    0.206001] pci 0000:00:0d.1: reg 24 32bit mmio: [0xf9df8000-0xf9df8fff]
[    0.206046] pci 0000:00:0d.2: reg 10 io port: [0xa080-0xa087]
[    0.206051] pci 0000:00:0d.2: reg 14 io port: [0xa000-0xa003]
[    0.206056] pci 0000:00:0d.2: reg 18 io port: [0x9c00-0x9c07]
[    0.206060] pci 0000:00:0d.2: reg 1c io port: [0x9880-0x9883]
[    0.206065] pci 0000:00:0d.2: reg 20 io port: [0x9800-0x980f]
[    0.206070] pci 0000:00:0d.2: reg 24 32bit mmio: [0xf9df7000-0xf9df7fff]
[    0.206170] pci 0000:00:10.0: reg 10 32bit mmio: [0xf9df6000-0xf9df6fff]
[    0.206175] pci 0000:00:10.0: reg 14 io port: [0x9480-0x9487]
[    0.206179] pci 0000:00:10.0: reg 18 32bit mmio: [0xf9dfa800-0xf9dfa8ff]
[    0.206185] pci 0000:00:10.0: reg 1c 32bit mmio: [0xf9dfa400-0xf9dfa40f]
[    0.206213] pci 0000:00:10.0: supports D1 D2
[    0.206215] pci 0000:00:10.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.206271] pci 0000:00:10.0: PME# disabled
[    0.206358] pci 0000:00:11.0: reg 10 32bit mmio: [0xf9df5000-0xf9df5fff]
[    0.206363] pci 0000:00:11.0: reg 14 io port: [0x9400-0x9407]
[    0.206368] pci 0000:00:11.0: reg 18 32bit mmio: [0xf9dfa000-0xf9dfa0ff]
[    0.206373] pci 0000:00:11.0: reg 1c 32bit mmio: [0xf9df4c00-0xf9df4c0f]
[    0.206402] pci 0000:00:11.0: supports D1 D2
[    0.206404] pci 0000:00:11.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.206460] pci 0000:00:11.0: PME# disabled
[    0.206561] pci 0000:00:12.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.206615] pci 0000:00:12.0: PME# disabled
[    0.206716] pci 0000:00:13.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.206770] pci 0000:00:13.0: PME# disabled
[    0.206871] pci 0000:00:14.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.206925] pci 0000:00:14.0: PME# disabled
[    0.207026] pci 0000:00:15.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.207080] pci 0000:00:15.0: PME# disabled
[    0.207181] pci 0000:00:16.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.207235] pci 0000:00:16.0: PME# disabled
[    0.207336] pci 0000:00:17.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.207390] pci 0000:00:17.0: PME# disabled
[    0.207597] pci 0000:03:00.0: reg 10 32bit mmio: [0xf9efc000-0xf9efffff]
[    0.207615] pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
[    0.207669] pci 0000:03:00.0: PME# disabled
[    0.207754] pci 0000:00:04.0: bridge io port: [0xc000-0xdfff]
[    0.207757] pci 0000:00:04.0: bridge 32bit mmio: [0xf9e00000-0xfeafffff]
[    0.207761] pci 0000:00:04.0: bridge 64bit mmio pref: [0xc0000000-0xdfffffff]
[    0.207795] pci 0000:04:00.0: PME# supported from D0 D3hot D3cold
[    0.207849] pci 0000:04:00.0: PME# disabled
[    0.207933] pci 0000:04:01.0: PME# supported from D0 D3hot D3cold
[    0.207987] pci 0000:04:01.0: PME# disabled
[    0.208026] pci 0000:03:00.0: bridge io port: [0xc000-0xdfff]
[    0.208030] pci 0000:03:00.0: bridge 32bit mmio: [0xf9f00000-0xfeafffff]
[    0.208034] pci 0000:03:00.0: bridge 64bit mmio pref: [0xc0000000-0xdfffffff]
[    0.208060] pci 0000:05:00.0: reg 10 32bit mmio: [0xfb000000-0xfbffffff]
[    0.208069] pci 0000:05:00.0: reg 14 64bit mmio pref: [0xc0000000-0xcfffffff]
[    0.208077] pci 0000:05:00.0: reg 1c 64bit mmio: [0xfa000000-0xfaffffff]
[    0.208083] pci 0000:05:00.0: reg 24 io port: [0xcc00-0xcc7f]
[    0.208088] pci 0000:05:00.0: reg 30 32bit mmio pref: [0xf9fe0000-0xf9ffffff]
[    0.208134] pci 0000:04:00.0: bridge io port: [0xc000-0xcfff]
[    0.208138] pci 0000:04:00.0: bridge 32bit mmio: [0xf9f00000-0xfbffffff]
[    0.208142] pci 0000:04:00.0: bridge 64bit mmio pref: [0xc0000000-0xcfffffff]
[    0.208169] pci 0000:06:00.0: reg 10 32bit mmio: [0xfd000000-0xfdffffff]
[    0.208178] pci 0000:06:00.0: reg 14 64bit mmio pref: [0xd0000000-0xdfffffff]
[    0.208186] pci 0000:06:00.0: reg 1c 64bit mmio: [0xfc000000-0xfcffffff]
[    0.208192] pci 0000:06:00.0: reg 24 io port: [0xdc00-0xdc7f]
[    0.208197] pci 0000:06:00.0: reg 30 32bit mmio pref: [0xfeae0000-0xfeafffff]
[    0.208243] pci 0000:04:01.0: bridge io port: [0xd000-0xdfff]
[    0.208247] pci 0000:04:01.0: bridge 32bit mmio: [0xfc000000-0xfeafffff]
[    0.208251] pci 0000:04:01.0: bridge 64bit mmio pref: [0xd0000000-0xdfffffff]
[    0.208291] pci 0000:07:04.0: reg 10 32bit mmio: [0xfebff800-0xfebfffff]
[    0.208297] pci 0000:07:04.0: reg 14 io port: [0xec00-0xec7f]
[    0.208330] pci 0000:07:04.0: supports D2
[    0.208332] pci 0000:07:04.0: PME# supported from D2 D3hot D3cold
[    0.208387] pci 0000:07:04.0: PME# disabled
[    0.208465] pci 0000:07:08.0: reg 10 io port: [0xe800-0xe8ff]
[    0.208502] pci 0000:07:08.0: supports D1 D2
[    0.208529] pci 0000:00:0e.0: transparent bridge
[    0.208581] pci 0000:00:0e.0: bridge io port: [0xe000-0xefff]
[    0.208585] pci 0000:00:0e.0: bridge 32bit mmio: [0xfeb00000-0xfebfffff]
[    0.208840] pci_bus 0000:00: on NUMA node 0
[    0.208844] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[    0.209062] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P8._PRT]
[    0.209109] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P9._PRT]
[    0.209157] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0PA._PRT]
[    0.209225] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
[    0.209311] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR10._PRT]
[    0.209357] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR11._PRT]
[    0.209403] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR12._PRT]
[    0.209449] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR13._PRT]
[    0.209495] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR14._PRT]
[    0.209541] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR15._PRT]
[    0.222126] ACPI: PCI Interrupt Link [LNKA] (IRQs 16 17 18 19) *5
[    0.222648] ACPI: PCI Interrupt Link [LNKB] (IRQs 16 17 18 19) *0, disabled.
[    0.223208] ACPI: PCI Interrupt Link [LNKC] (IRQs 16 17 18 19) *10
[    0.223728] ACPI: PCI Interrupt Link [LNKD] (IRQs 16 17 18 19) *0, disabled.
[    0.224277] ACPI: PCI Interrupt Link [LNEA] (IRQs 16 17 18 19) *11
[    0.224796] ACPI: PCI Interrupt Link [LNEB] (IRQs 16 17 18 19) *10
[    0.225319] ACPI: PCI Interrupt Link [LNEC] (IRQs 16 17 18 19) *0, disabled.
[    0.225879] ACPI: PCI Interrupt Link [LNED] (IRQs 16 17 18 19) *0, disabled.
[    0.226439] ACPI: PCI Interrupt Link [LUB0] (IRQs 20 21 22 23) *5
[    0.226959] ACPI: PCI Interrupt Link [LMAD] (IRQs 20 21 22 23) *10
[    0.227481] ACPI: PCI Interrupt Link [LUB2] (IRQs 20 21 22 23) *7
[    0.228046] ACPI: PCI Interrupt Link [LMAC] (IRQs 20 21 22 23) *10
[    0.228569] ACPI: PCI Interrupt Link [LAZA] (IRQs 20 21 22 23) *0, disabled.
[    0.229129] ACPI: PCI Interrupt Link [LSMB] (IRQs 20 21 22 23) *11
[    0.229649] ACPI: PCI Interrupt Link [LPMU] (IRQs 20 21 22 23) *0, disabled.
[    0.230210] ACPI: PCI Interrupt Link [LSA0] (IRQs 20 21 22 23) *10
[    0.230730] ACPI: PCI Interrupt Link [LSA1] (IRQs 20 21 22 23) *11
[    0.231285] ACPI: PCI Interrupt Link [LATA] (IRQs 20 21 22 23) *0, disabled.
[    0.231849] ACPI: PCI Interrupt Link [LSA2] (IRQs 20 21 22 23) *5
[    0.232291] vgaarb: device added: PCI:0000:06:00.0,decodes=io+mem,owns=io+mem,locks=none
[    0.232352] vgaarb: loaded
[    0.232505] SCSI subsystem initialized
[    0.232650] libata version 3.00 loaded.
[    0.232719] usbcore: registered new interface driver usbfs
[    0.232780] usbcore: registered new interface driver hub
[    0.232852] usbcore: registered new device driver usb
[    0.233023] ACPI: WMI: Mapper loaded
[    0.233074] PCI: Using ACPI for IRQ routing
[    0.233303] NetLabel: Initializing
[    0.233353] NetLabel:  domain hash size = 128
[    0.233404] NetLabel:  protocols = UNLABELED CIPSOv4
[    0.233466] NetLabel:  unlabeled traffic allowed by default
[    0.233549] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 31
[    0.233766] hpet0: 3 comparators, 32-bit 25.000000 MHz counter
[    0.236219] Switching to clocksource hpet
[    0.237652] AppArmor: AppArmor Filesystem Enabled
[    0.237726] pnp: PnP ACPI init
[    0.237794] ACPI: bus type pnp registered
[    0.242414] pnp: PnP ACPI: found 16 devices
[    0.242466] ACPI: ACPI bus type pnp unregistered
[    0.242519] PnPBIOS: Disabled by ACPI PNP
[    0.242583] system 00:08: ioport range 0x4d0-0x4d1 has been reserved
[    0.242637] system 00:08: ioport range 0x800-0x80f has been reserved
[    0.242691] system 00:08: ioport range 0x2000-0x207f has been reserved
[    0.242745] system 00:08: ioport range 0x2080-0x20ff has been reserved
[    0.242798] system 00:08: ioport range 0x2400-0x247f has been reserved
[    0.242852] system 00:08: ioport range 0x2480-0x24ff has been reserved
[    0.242905] system 00:08: ioport range 0x2800-0x287f has been reserved
[    0.242960] system 00:08: ioport range 0x2880-0x28ff has been reserved
[    0.243014] system 00:08: ioport range 0x2c00-0x2c7f has been reserved
[    0.243068] system 00:08: ioport range 0x2c80-0x2cff has been reserved
[    0.243123] system 00:08: iomem range 0xfee01000-0xfeefffff has been reserved
[    0.243177] system 00:08: iomem range 0xffb80000-0xffbfffff has been reserved
[    0.243234] system 00:0a: iomem range 0xfec00000-0xfec00fff could not be reserved
[    0.243295] system 00:0a: iomem range 0xfee00000-0xfee00fff has been reserved
[    0.243352] system 00:0d: ioport range 0xa00-0xa0f has been reserved
[    0.243405] system 00:0d: ioport range 0xa10-0xa1f has been reserved
[    0.243461] system 00:0e: iomem range 0xe0000000-0xefffffff has been reserved
[    0.243518] system 00:0f: iomem range 0x0-0x9ffff could not be reserved
[    0.243571] system 00:0f: iomem range 0xc0000-0xcffff could not be reserved
[    0.243626] system 00:0f: iomem range 0xe0000-0xfffff could not be reserved
[    0.243680] system 00:0f: iomem range 0x100000-0x7fffffff could not be reserved
[    0.243740] system 00:0f: iomem range 0xfec00000-0xffffffff could not be reserved
[    0.278527] pci 0000:00:02.0: PCI bridge, secondary bus 0000:01
[    0.278581] pci 0000:00:02.0:   IO window: disabled
[    0.278633] pci 0000:00:02.0:   MEM window: disabled
[    0.278686] pci 0000:00:02.0:   PREFETCH window: disabled
[    0.278739] pci 0000:00:03.0: PCI bridge, secondary bus 0000:02
[    0.278792] pci 0000:00:03.0:   IO window: disabled
[    0.278844] pci 0000:00:03.0:   MEM window: disabled
[    0.278896] pci 0000:00:03.0:   PREFETCH window: disabled
[    0.278950] pci 0000:04:00.0: PCI bridge, secondary bus 0000:05
[    0.279003] pci 0000:04:00.0:   IO window: 0xc000-0xcfff
[    0.279057] pci 0000:04:00.0:   MEM window: 0xf9f00000-0xfbffffff
[    0.279111] pci 0000:04:00.0:   PREFETCH window: 0x000000c0000000-0x000000cfffffff
[    0.279174] pci 0000:04:01.0: PCI bridge, secondary bus 0000:06
[    0.279227] pci 0000:04:01.0:   IO window: 0xd000-0xdfff
[    0.279281] pci 0000:04:01.0:   MEM window: 0xfc000000-0xfeafffff
[    0.279335] pci 0000:04:01.0:   PREFETCH window: 0x000000d0000000-0x000000dfffffff
[    0.279397] pci 0000:03:00.0: PCI bridge, secondary bus 0000:04
[    0.279451] pci 0000:03:00.0:   IO window: 0xc000-0xdfff
[    0.279504] pci 0000:03:00.0:   MEM window: 0xf9f00000-0xfeafffff
[    0.279558] pci 0000:03:00.0:   PREFETCH window: 0x000000c0000000-0x000000dfffffff
[    0.279620] pci 0000:00:04.0: PCI bridge, secondary bus 0000:03
[    0.279673] pci 0000:00:04.0:   IO window: 0xc000-0xdfff
[    0.279726] pci 0000:00:04.0:   MEM window: 0xf9e00000-0xfeafffff
[    0.279780] pci 0000:00:04.0:   PREFETCH window: 0x000000c0000000-0x000000dfffffff
[    0.279841] pci 0000:00:0e.0: PCI bridge, secondary bus 0000:07
[    0.279895] pci 0000:00:0e.0:   IO window: 0xe000-0xefff
[    0.279948] pci 0000:00:0e.0:   MEM window: 0xfeb00000-0xfebfffff
[    0.280018] pci 0000:00:0e.0:   PREFETCH window: disabled
[    0.280072] pci 0000:00:12.0: PCI bridge, secondary bus 0000:08
[    0.280125] pci 0000:00:12.0:   IO window: disabled
[    0.280178] pci 0000:00:12.0:   MEM window: disabled
[    0.280230] pci 0000:00:12.0:   PREFETCH window: disabled
[    0.280285] pci 0000:00:13.0: PCI bridge, secondary bus 0000:09
[    0.280337] pci 0000:00:13.0:   IO window: disabled
[    0.280390] pci 0000:00:13.0:   MEM window: disabled
[    0.280443] pci 0000:00:13.0:   PREFETCH window: disabled
[    0.280497] pci 0000:00:14.0: PCI bridge, secondary bus 0000:0a
[    0.280549] pci 0000:00:14.0:   IO window: disabled
[    0.280602] pci 0000:00:14.0:   MEM window: disabled
[    0.280655] pci 0000:00:14.0:   PREFETCH window: disabled
[    0.280709] pci 0000:00:15.0: PCI bridge, secondary bus 0000:0b
[    0.280761] pci 0000:00:15.0:   IO window: disabled
[    0.280814] pci 0000:00:15.0:   MEM window: disabled
[    0.280867] pci 0000:00:15.0:   PREFETCH window: disabled
[    0.280921] pci 0000:00:16.0: PCI bridge, secondary bus 0000:0c
[    0.280974] pci 0000:00:16.0:   IO window: disabled
[    0.281030] pci 0000:00:16.0:   MEM window: disabled
[    0.281082] pci 0000:00:16.0:   PREFETCH window: disabled
[    0.281137] pci 0000:00:17.0: PCI bridge, secondary bus 0000:0d
[    0.281189] pci 0000:00:17.0:   IO window: disabled
[    0.281242] pci 0000:00:17.0:   MEM window: disabled
[    0.281294] pci 0000:00:17.0:   PREFETCH window: disabled
[    0.281355] pci 0000:00:02.0: setting latency timer to 64
[    0.281360] pci 0000:00:03.0: setting latency timer to 64
[    0.281364] pci 0000:00:04.0: setting latency timer to 64
[    0.281370] pci 0000:03:00.0: setting latency timer to 64
[    0.281376] pci 0000:04:00.0: setting latency timer to 64
[    0.281383] pci 0000:04:01.0: setting latency timer to 64
[    0.281387] pci 0000:00:0e.0: setting latency timer to 64
[    0.281393] pci 0000:00:12.0: setting latency timer to 64
[    0.281399] pci 0000:00:13.0: setting latency timer to 64
[    0.281405] pci 0000:00:14.0: setting latency timer to 64
[    0.281411] pci 0000:00:15.0: setting latency timer to 64
[    0.281417] pci 0000:00:16.0: setting latency timer to 64
[    0.281423] pci 0000:00:17.0: setting latency timer to 64
[    0.281427] pci_bus 0000:00: resource 0 io:  [0x00-0xffff]
[    0.281430] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff]
[    0.281433] pci_bus 0000:03: resource 0 io:  [0xc000-0xdfff]
[    0.281435] pci_bus 0000:03: resource 1 mem: [0xf9e00000-0xfeafffff]
[    0.281438] pci_bus 0000:03: resource 2 pref mem [0xc0000000-0xdfffffff]
[    0.281441] pci_bus 0000:04: resource 0 io:  [0xc000-0xdfff]
[    0.281443] pci_bus 0000:04: resource 1 mem: [0xf9f00000-0xfeafffff]
[    0.281446] pci_bus 0000:04: resource 2 pref mem [0xc0000000-0xdfffffff]
[    0.281449] pci_bus 0000:05: resource 0 io:  [0xc000-0xcfff]
[    0.281451] pci_bus 0000:05: resource 1 mem: [0xf9f00000-0xfbffffff]
[    0.281454] pci_bus 0000:05: resource 2 pref mem [0xc0000000-0xcfffffff]
[    0.281457] pci_bus 0000:06: resource 0 io:  [0xd000-0xdfff]
[    0.281459] pci_bus 0000:06: resource 1 mem: [0xfc000000-0xfeafffff]
[    0.281462] pci_bus 0000:06: resource 2 pref mem [0xd0000000-0xdfffffff]
[    0.281465] pci_bus 0000:07: resource 0 io:  [0xe000-0xefff]
[    0.281467] pci_bus 0000:07: resource 1 mem: [0xfeb00000-0xfebfffff]
[    0.281470] pci_bus 0000:07: resource 3 io:  [0x00-0xffff]
[    0.281472] pci_bus 0000:07: resource 4 mem: [0x000000-0xffffffff]
[    0.281508] NET: Registered protocol family 2
[    0.281640] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.281991] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.283552] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[    0.283956] TCP: Hash tables configured (established 131072 bind 65536)
[    0.284041] TCP reno registered
[    0.284180] NET: Registered protocol family 1
[    0.284281] pci 0000:00:00.0: Found enabled HT MSI Mapping
[    0.284352] pci 0000:00:00.0: Found enabled HT MSI Mapping
[    0.284427] pci 0000:00:00.0: Found enabled HT MSI Mapping
[    0.300078] pci 0000:00:08.0: Found enabled HT MSI Mapping
[    0.300172] pci 0000:00:08.0: Found enabled HT MSI Mapping
[    0.300265] pci 0000:00:08.0: Found enabled HT MSI Mapping
[    0.300360] pci 0000:00:08.0: Found enabled HT MSI Mapping
[    0.300469] pci 0000:00:08.0: Found enabled HT MSI Mapping
[    0.300585] pci 0000:00:08.0: Found enabled HT MSI Mapping
[    0.300708] pci 0000:00:08.0: Found enabled HT MSI Mapping
[    0.300836] pci 0000:00:08.0: Found enabled HT MSI Mapping
[    0.300973] pci 0000:00:08.0: Found enabled HT MSI Mapping
[    0.301119] pci 0000:00:08.0: Found enabled HT MSI Mapping
[    0.301269] pci 0000:00:08.0: Found enabled HT MSI Mapping
[    0.301426] pci 0000:00:08.0: Found enabled HT MSI Mapping
[    0.301514] pci 0000:06:00.0: Boot video device
[    0.301703] cpufreq-nforce2: No nForce2 chipset.
[    0.301776] Scanning for low memory corruption every 60 seconds
[    0.301940] audit: initializing netlink socket (disabled)
[    0.302003] type=2000 audit(1272813514.300:1): initialized
[    0.309989] highmem bounce pool size: 64 pages
[    0.310045] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[    0.311265] VFS: Disk quotas dquot_6.5.2
[    0.311364] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    0.311868] fuse init (API version 7.13)
[    0.311988] msgmni has been set to 1681
[    0.312264] alg: No test for stdrng (krng)
[    0.312357] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[    0.312418] io scheduler noop registered
[    0.312469] io scheduler anticipatory registered
[    0.312521] io scheduler deadline registered
[    0.312602] io scheduler cfq registered (default)
[    0.312800]   alloc irq_desc for 24 on node -1
[    0.312802]   alloc kstat_irqs on node -1
[    0.312811] pcieport 0000:00:02.0: irq 24 for MSI/MSI-X
[    0.312817] pcieport 0000:00:02.0: setting latency timer to 64
[    0.312880]   alloc irq_desc for 25 on node -1
[    0.312882]   alloc kstat_irqs on node -1
[    0.312886] pcieport 0000:00:03.0: irq 25 for MSI/MSI-X
[    0.312890] pcieport 0000:00:03.0: setting latency timer to 64
[    0.312947]   alloc irq_desc for 26 on node -1
[    0.312949]   alloc kstat_irqs on node -1
[    0.312953] pcieport 0000:00:04.0: irq 26 for MSI/MSI-X
[    0.312957] pcieport 0000:00:04.0: setting latency timer to 64
[    0.313035]   alloc irq_desc for 27 on node -1
[    0.313037]   alloc kstat_irqs on node -1
[    0.313042] pcieport 0000:00:12.0: irq 27 for MSI/MSI-X
[    0.313047] pcieport 0000:00:12.0: setting latency timer to 64
[    0.313129]   alloc irq_desc for 28 on node -1
[    0.313130]   alloc kstat_irqs on node -1
[    0.313136] pcieport 0000:00:13.0: irq 28 for MSI/MSI-X
[    0.313141] pcieport 0000:00:13.0: setting latency timer to 64
[    0.313223]   alloc irq_desc for 29 on node -1
[    0.313225]   alloc kstat_irqs on node -1
[    0.313230] pcieport 0000:00:14.0: irq 29 for MSI/MSI-X
[    0.313235] pcieport 0000:00:14.0: setting latency timer to 64
[    0.313319]   alloc irq_desc for 30 on node -1
[    0.313321]   alloc kstat_irqs on node -1
[    0.313326] pcieport 0000:00:15.0: irq 30 for MSI/MSI-X
[    0.313331] pcieport 0000:00:15.0: setting latency timer to 64
[    0.313416]   alloc irq_desc for 31 on node -1
[    0.313423]   alloc kstat_irqs on node -1
[    0.313428] pcieport 0000:00:16.0: irq 31 for MSI/MSI-X
[    0.313433] pcieport 0000:00:16.0: setting latency timer to 64
[    0.313515]   alloc irq_desc for 32 on node -1
[    0.313516]   alloc kstat_irqs on node -1
[    0.313521] pcieport 0000:00:17.0: irq 32 for MSI/MSI-X
[    0.313526] pcieport 0000:00:17.0: setting latency timer to 64
[    0.313652] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    0.313724] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    0.313880] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[    0.313948] ACPI: Power Button [PWRB]
[    0.314039] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[    0.314099] ACPI: Power Button [PWRF]
[    0.314425] processor LNXCPU:00: registered as cooling_device0
[    0.314503] processor LNXCPU:01: registered as cooling_device1
[    0.319383] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    0.319540] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[    0.319843] 00:05: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[    0.320874] brd: module loaded
[    0.321319] loop: module loaded
[    0.321448] input: Macintosh mouse button emulation as /devices/virtual/input/input2
[    0.321693] pata_acpi 0000:00:0c.0: setting latency timer to 64
[    0.321989] ACPI: PCI Interrupt Link [LSA0] enabled at IRQ 23
[    0.322045]   alloc irq_desc for 23 on node -1
[    0.322047]   alloc kstat_irqs on node -1
[    0.322058] pata_acpi 0000:00:0d.0: PCI INT A -> Link[LSA0] -> GSI 23 (level, low) -> IRQ 23
[    0.322130] pata_acpi 0000:00:0d.0: setting latency timer to 64
[    0.322137] pata_acpi 0000:00:0d.0: PCI INT A disabled
[    0.322418] ACPI: PCI Interrupt Link [LSA1] enabled at IRQ 22
[    0.322471]   alloc irq_desc for 22 on node -1
[    0.322473]   alloc kstat_irqs on node -1
[    0.322480] pata_acpi 0000:00:0d.1: PCI INT B -> Link[LSA1] -> GSI 22 (level, low) -> IRQ 22
[    0.322551] pata_acpi 0000:00:0d.1: setting latency timer to 64
[    0.322558] pata_acpi 0000:00:0d.1: PCI INT B disabled
[    0.322839] ACPI: PCI Interrupt Link [LSA2] enabled at IRQ 21
[    0.322892]   alloc irq_desc for 21 on node -1
[    0.322893]   alloc kstat_irqs on node -1
[    0.322900] pata_acpi 0000:00:0d.2: PCI INT C -> Link[LSA2] -> GSI 21 (level, low) -> IRQ 21
[    0.322972] pata_acpi 0000:00:0d.2: setting latency timer to 64
[    0.322979] pata_acpi 0000:00:0d.2: PCI INT C disabled
[    0.323295] Fixed MDIO Bus: probed
[    0.323372] PPP generic driver version 2.4.2
[    0.323454] tun: Universal TUN/TAP device driver, 1.6
[    0.323506] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[    0.323632] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.323916] ACPI: PCI Interrupt Link [LUB2] enabled at IRQ 20
[    0.323969]   alloc irq_desc for 20 on node -1
[    0.323971]   alloc kstat_irqs on node -1
[    0.323978] ehci_hcd 0000:00:0a.1: PCI INT B -> Link[LUB2] -> GSI 20 (level, low) -> IRQ 20
[    0.324080] ehci_hcd 0000:00:0a.1: setting latency timer to 64
[    0.324082] ehci_hcd 0000:00:0a.1: EHCI Host Controller
[    0.324167] ehci_hcd 0000:00:0a.1: new USB bus registered, assigned bus number 1
[    0.324248] ehci_hcd 0000:00:0a.1: debug port 1
[    0.324305] ehci_hcd 0000:00:0a.1: cache line size of 64 is not supported
[    0.324328] ehci_hcd 0000:00:0a.1: irq 20, io mem 0xf9dfac00
[    0.324429] isapnp: Scanning for PnP cards...
[    0.357211] ehci_hcd 0000:00:0a.1: USB 2.0 started, EHCI 1.00
[    0.357413] usb usb1: configuration #1 chosen from 1 choice
[    0.357490] hub 1-0:1.0: USB hub found
[    0.357551] hub 1-0:1.0: 10 ports detected
[    0.357670] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    0.358020] ACPI: PCI Interrupt Link [LUB0] enabled at IRQ 23
[    0.358076] ohci_hcd 0000:00:0a.0: PCI INT A -> Link[LUB0] -> GSI 23 (level, low) -> IRQ 23
[    0.358153] ohci_hcd 0000:00:0a.0: setting latency timer to 64
[    0.358156] ohci_hcd 0000:00:0a.0: OHCI Host Controller
[    0.358240] ohci_hcd 0000:00:0a.0: new USB bus registered, assigned bus number 2
[    0.358333] ohci_hcd 0000:00:0a.0: irq 23, io mem 0xf9dfb000
[    0.415292] usb usb2: configuration #1 chosen from 1 choice
[    0.415372] hub 2-0:1.0: USB hub found
[    0.415432] hub 2-0:1.0: 10 ports detected
[    0.415553] uhci_hcd: USB Universal Host Controller Interface driver
[    0.415693] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
[    0.422122] serio: i8042 KBD port at 0x60,0x64 irq 1
[    0.422186] serio: i8042 AUX port at 0x60,0x64 irq 12
[    0.422341] mice: PS/2 mouse device common for all mice
[    0.422486] rtc_cmos 00:02: RTC can wake from S4
[    0.422570] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[    0.422658] rtc0: alarms up to one year, y3k, 114 bytes nvram, hpet irqs
[    0.422815] device-mapper: uevent: version 1.0.3
[    0.443684] Freeing initrd memory: 12199k freed
[    0.457297] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com
[    0.457422] device-mapper: multipath: version 1.1.0 loaded
[    0.457475] device-mapper: multipath round-robin: version 1.0.0 loaded
[    0.457642] EISA: Probing bus 0 at eisa.0
[    0.457700] Cannot allocate resource for EISA slot 2
[    0.457766] EISA: Detected 0 cards.
[    0.457881] cpuidle: using governor ladder
[    0.457932] cpuidle: using governor menu
[    0.458346] TCP cubic registered
[    0.458513] NET: Registered protocol family 10
[    0.458938] lo: Disabled Privacy Extensions
[    0.459237] NET: Registered protocol family 17
[    0.459316] powernow-k8: Found 1 AMD Athlon(tm) 64 X2 Dual Core Processor 5000+ processors (2 cpu cores) (version 2.20.00)
[    0.459388] [Firmware Bug]: powernow-k8: No compatible ACPI _PSS objects found.
[    0.459389] [Firmware Bug]: powernow-k8: Try again with latest BIOS.
[    0.459515] Using IPI No-Shortcut mode
[    0.459633] PM: Resume from disk failed.
[    0.459645] registered taskstats version 1
[    0.460197]   Magic number: 10:5:335
[    0.460270] tty tty56: hash matches
[    0.460404] rtc_cmos 00:02: setting system clock to 2010-05-02 15:18:35 UTC (1272813515)
[    0.460465] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    0.460516] EDD information not available.
[    0.677489] isapnp: No Plug & Play device found
[    0.677563] Freeing unused kernel memory: 656k freed
[    0.678057] Write protecting the kernel text: 4676k
[    0.678141] Write protecting the kernel read-only data: 1840k
[    0.708798] udev: starting version 151
[    0.804553] sata_nv 0000:00:0d.0: version 3.5
[    0.804569] sata_nv 0000:00:0d.0: PCI INT A -> Link[LSA0] -> GSI 23 (level, low) -> IRQ 23
[    0.804634] sata_nv 0000:00:0d.0: Using SWNCQ mode
[    0.804740] sata_nv 0000:00:0d.0: setting latency timer to 64
[    0.832518] scsi0 : sata_nv
[    0.833373] scsi1 : sata_nv
[    0.833606] ata1: SATA max UDMA/133 cmd 0xb800 ctl 0xb480 bmdma 0xb000 irq 23
[    0.833662] ata2: SATA max UDMA/133 cmd 0xb400 ctl 0xb080 bmdma 0xb008 irq 23
[    0.833751] forcedeth: Reverse Engineered nForce ethernet driver. Version 0.64.
[    0.834071] ACPI: PCI Interrupt Link [LMAC] enabled at IRQ 22
[    0.834127] forcedeth 0000:00:10.0: PCI INT A -> Link[LMAC] -> GSI 22 (level, low) -> IRQ 22
[    0.834193] forcedeth 0000:00:10.0: setting latency timer to 64
[    0.834253] nv_probe: set workaround bit for reversed mac addr
[    0.837764] Floppy drive(s): fd0 is 1.44M
[    0.838799] usb 1-3: new high speed USB device using ehci_hcd and address 4
[    0.856908] FDC 0 is a post-1991 82077
[    0.968877] usb 1-3: configuration #1 chosen from 1 choice
[    0.969059] hub 1-3:1.0: USB hub found
[    0.969158] hub 1-3:1.0: 4 ports detected
[    1.300049] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    1.309284] ata1.00: ATA-6: WDC WD360GD-00FLC0, 33.08F33, max UDMA/133
[    1.309338] ata1.00: 72303840 sectors, multi 16: LBA48 
[    1.325258] ata1.00: configured for UDMA/133
[    1.325421] scsi 0:0:0:0: Direct-Access     ATA      WDC WD360GD-00FL 33.0 PQ: 0 ANSI: 5
[    1.325632] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    1.325752] sd 0:0:0:0: [sda] 72303840 512-byte logical blocks: (37.0 GB/34.4 GiB)
[    1.325848] sd 0:0:0:0: [sda] Write Protect is off
[    1.325900] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    1.325919] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.326105]  sda:
[    1.328024] usb 2-1: new low speed USB device using ohci_hcd and address 2
[    1.331688]  sda1 sda2
[    1.332041] sd 0:0:0:0: [sda] Attached SCSI disk
[    1.353728] forcedeth 0000:00:10.0: ifname eth0, PHY OUI 0x1c1 @ 1, addr 00:16:17:9a:85:9f
[    1.353792] forcedeth 0000:00:10.0: highdma csum vlan pwrctl mgmt gbit lnktim msi desc-v3
[    1.353876] pata_amd 0000:00:0c.0: version 0.4.1
[    1.353918] pata_amd 0000:00:0c.0: setting latency timer to 64
[    1.354026] scsi2 : pata_amd
[    1.354144] scsi3 : pata_amd
[    1.355264] ata3: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14
[    1.355318] ata4: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15
[    1.355443] sata_nv 0000:00:0d.1: PCI INT B -> Link[LSA1] -> GSI 22 (level, low) -> IRQ 22
[    1.356369] sata_nv 0000:00:0d.1: Using SWNCQ mode
[    1.356472] sata_nv 0000:00:0d.1: setting latency timer to 64
[    1.356616] scsi4 : sata_nv
[    1.356718] scsi5 : sata_nv
[    1.356893] ata5: SATA max UDMA/133 cmd 0xac00 ctl 0xa880 bmdma 0xa400 irq 22
[    1.356948] ata6: SATA max UDMA/133 cmd 0xa800 ctl 0xa480 bmdma 0xa408 irq 22
[    1.357308] ACPI: PCI Interrupt Link [LMAD] enabled at IRQ 21
[    1.357365] forcedeth 0000:00:11.0: PCI INT A -> Link[LMAD] -> GSI 21 (level, low) -> IRQ 21
[    1.357427] forcedeth 0000:00:11.0: setting latency timer to 64
[    1.357471] nv_probe: set workaround bit for reversed mac addr
[    1.542308] usb 2-1: configuration #1 chosen from 1 choice
[    1.692328] ata3.00: ATAPI: PLEXTOR DVDR   PX-820A, 1.00, max UDMA/66
[    1.692408] ata3.01: ATAPI: LITE-ON LTR-48125W, VS04, max UDMA/33
[    1.692479] ata3: nv_mode_filter: 0x1f39f&0x1f39f->0x1f39f, BIOS=0x1f000 (0xc5c00000) ACPI=0x1f01f (30:60:0x15)
[    1.692484] ata3: nv_mode_filter: 0x739f&0x739f->0x739f, BIOS=0x7000 (0xc5c00000) ACPI=0x701f (30:60:0x15)
[    1.708277] ata3.00: configured for UDMA/66
[    1.724257] ata3.01: configured for UDMA/33
[    1.792053] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    1.801191] ata2.00: ATA-7: Maxtor 6V320F0, VA111900, max UDMA/133
[    1.801248] ata2.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 31/32)
[    1.817183] ata2.00: configured for UDMA/133
[    1.817341] scsi 1:0:0:0: Direct-Access     ATA      Maxtor 6V320F0   VA11 PQ: 0 ANSI: 5
[    1.817406] ata2.00: Disabling SWNCQ mode (depth 1)
[    1.817635] sd 1:0:0:0: Attached scsi generic sg1 type 0
[    1.817680] sd 1:0:0:0: [sdb] 625142448 512-byte logical blocks: (320 GB/298 GiB)
[    1.817715] sd 1:0:0:0: [sdb] Write Protect is off
[    1.817717] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[    1.817734] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.817857]  sdb:
[    1.819594] scsi 2:0:0:0: CD-ROM            PLEXTOR  DVDR   PX-820A   1.00 PQ: 0 ANSI: 5
[    1.824450] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[    1.824511] Uniform CD-ROM driver Revision: 3.20
[    1.824664] sr 2:0:0:0: Attached scsi CD-ROM sr0
[    1.824712] sr 2:0:0:0: Attached scsi generic sg2 type 5
[    1.829523] scsi 2:0:1:0: CD-ROM            LITE-ON  LTR-48125W       VS04 PQ: 0 ANSI: 5
[    1.841280]  sdb1
[    1.841666] sd 1:0:0:0: [sdb] Attached SCSI disk
[    1.852031] usb 2-2: new full speed USB device using ohci_hcd and address 3
[    1.877764] forcedeth 0000:00:11.0: ifname eth1, PHY OUI 0x1c1 @ 0, addr 00:16:17:98:3c:62
[    1.877827] forcedeth 0000:00:11.0: highdma csum vlan pwrctl mgmt gbit lnktim msi desc-v3
[    1.877922] sata_nv 0000:00:0d.2: PCI INT C -> Link[LSA2] -> GSI 21 (level, low) -> IRQ 21
[    1.877984] sata_nv 0000:00:0d.2: Using SWNCQ mode
[    1.878087] sata_nv 0000:00:0d.2: setting latency timer to 64
[    1.878234] scsi6 : sata_nv
[    1.878391] scsi7 : sata_nv
[    1.878595] ata7: SATA max UDMA/133 cmd 0xa080 ctl 0xa000 bmdma 0x9800 irq 21
[    1.878650] ata8: SATA max UDMA/133 cmd 0x9c00 ctl 0x9880 bmdma 0x9808 irq 21
[    1.879029] sr1: scsi3-mmc drive: 238x/48x writer cd/rw xa/form2 cdda tray
[    1.879199] sr 2:0:1:0: Attached scsi CD-ROM sr1
[    1.879270] sr 2:0:1:0: Attached scsi generic sg3 type 5
[    1.879394] ata4: port disabled. ignoring.
[    1.880054] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    1.888413] ata5.00: ATA-6: ST3120026AS, 3.05, max UDMA/133
[    1.888474] ata5.00: 234441648 sectors, multi 16: LBA48 
[    1.904412] ata5.00: configured for UDMA/133
[    1.904563] scsi 4:0:0:0: Direct-Access     ATA      ST3120026AS      3.05 PQ: 0 ANSI: 5
[    1.904780] sd 4:0:0:0: Attached scsi generic sg4 type 0
[    1.905079] sd 4:0:0:0: [sdc] 234441648 512-byte logical blocks: (120 GB/111 GiB)
[    1.905195] sd 4:0:0:0: [sdc] Write Protect is off
[    1.905247] sd 4:0:0:0: [sdc] Mode Sense: 00 3a 00 00
[    1.905266] sd 4:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.905453]  sdc: sdc1
[    1.915654] sd 4:0:0:0: [sdc] Attached SCSI disk
[    2.087307] usb 2-2: configuration #1 chosen from 1 choice
[    2.198447] ata7: SATA link down (SStatus 0 SControl 300)
[    2.376053] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    2.392032] usb 2-4: new low speed USB device using ohci_hcd and address 4
[    2.400343] ata6.00: ATA-7: HDT722525DLA380, V44OA80A, max UDMA/133
[    2.400397] ata6.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 31/32)
[    2.416346] ata6.00: configured for UDMA/133
[    2.416500] scsi 5:0:0:0: Direct-Access     ATA      HDT722525DLA380  V44O PQ: 0 ANSI: 5
[    2.416703] sd 5:0:0:0: [sdd] 488397168 512-byte logical blocks: (250 GB/232 GiB)
[    2.416800] sd 5:0:0:0: [sdd] Write Protect is off
[    2.416855] sd 5:0:0:0: [sdd] Mode Sense: 00 3a 00 00
[    2.416874] sd 5:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    2.417061] sd 5:0:0:0: Attached scsi generic sg5 type 0
[    2.417261]  sdd: sdd1
[    2.435542] sd 5:0:0:0: [sdd] Attached SCSI disk
[    2.606314] usb 2-4: configuration #1 chosen from 1 choice
[    2.614134] usbcore: registered new interface driver hiddev
[    2.620477] input: Dell Dell USB Keyboard as /devices/pci0000:00/0000:00:0a.0/usb2/2-1/2-1:1.0/input/input3
[    2.620628] generic-usb 0003:413C:2003.0001: input,hidraw0: USB HID v1.10 Keyboard [Dell Dell USB Keyboard] on usb-0000:00:0a.0-1/input0
[    2.626382] input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:0a.0/usb2/2-4/2-4:1.0/input/input4
[    2.626511] generic-usb 0003:046D:C00C.0002: input,hidraw1: USB HID v1.10 Mouse [Logitech USB Optical Mouse] on usb-0000:00:0a.0-4/input0
[    2.626594] usbcore: registered new interface driver usbhid
[    2.626647] usbhid: v2.6:USB HID core driver
[    2.884046] ata8: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    2.892336] ata8.00: ATA-7: HDT722525DLA380, V44OA80A, max UDMA/133
[    2.892390] ata8.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 31/32)
[    2.908342] ata8.00: configured for UDMA/133
[    2.908502] scsi 7:0:0:0: Direct-Access     ATA      HDT722525DLA380  V44O PQ: 0 ANSI: 5
[    2.908694] sd 7:0:0:0: [sde] 488397168 512-byte logical blocks: (250 GB/232 GiB)
[    2.908788] sd 7:0:0:0: [sde] Write Protect is off
[    2.908842] sd 7:0:0:0: [sde] Mode Sense: 00 3a 00 00
[    2.908861] sd 7:0:0:0: [sde] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    2.909051] sd 7:0:0:0: Attached scsi generic sg6 type 0
[    2.909222]  sde: sde1 < sde5 > sde2 sde3
[    2.934174] sd 7:0:0:0: [sde] Attached SCSI disk
[    2.935363] vga16fb: initializing
[    2.935366] vga16fb: mapped to 0xc00a0000
[    2.935483] fb0: VGA16 VGA frame buffer device
[    2.938168] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 19
[    2.938232]   alloc irq_desc for 19 on node -1
[    2.938234]   alloc kstat_irqs on node -1
[    2.938245] ohci1394 0000:07:04.0: PCI INT A -> Link[LNKA] -> GSI 19 (level, low) -> IRQ 19
[    2.993099] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[19]  MMIO=[febff800-febfffff]  Max Packet=[2048]  IR/IT contexts=[4/8]
[    3.105056] Console: switching to colour frame buffer device 80x30
[    3.450211] kjournald starting.  Commit interval 5 seconds
[    3.450322] EXT3-fs: mounted filesystem with ordered data mode.
[    4.264270] ieee1394: Host added: ID:BUS[0-00:1023]  GUID[0010dc000108cbd5]
[   24.525272] udev: starting version 151
[   24.529626] Adding 4000176k swap on /dev/sde3.  Priority:-1 extents:1 across:4000176k 
[   24.555852] lp: driver loaded but no devices found
[   24.612682] i2c i2c-0: nForce2 SMBus adapter at 0x2d00
[   24.612701] i2c i2c-1: nForce2 SMBus adapter at 0x2e00
[   24.685595] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[   24.686435] k8temp 0000:00:18.3: Temperature readouts might be wrong - check erratum #141
[   24.701865] w83627ehf: Found W83627EHG chip at 0xa10
[   24.734707] type=1505 audit(1272806339.771:2):  operation="profile_load" pid=628 name="/sbin/dhclient3"
[   24.734927] type=1505 audit(1272806339.771:3):  operation="profile_load" pid=628 name="/usr/lib/NetworkManager/nm-dhcp-client.action"
[   24.735050] type=1505 audit(1272806339.771:4):  operation="profile_load" pid=628 name="/usr/lib/connman/scripts/dhclient-script"
[   24.831849] usblp0: USB Bidirectional printer dev 3 if 0 alt 0 proto 2 vid 0x03F0 pid 0x0904
[   24.831873] usbcore: registered new interface driver usblp
[   24.840547] Linux agpgart interface v0.103
[   24.879010] EXT3 FS on sde5, internal journal
[   24.912052] nvidia: module license 'NVIDIA' taints kernel.
[   24.912057] Disabling lock debugging due to kernel taint
[   25.837622] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 18
[   25.837628]   alloc irq_desc for 18 on node -1
[   25.837630]   alloc kstat_irqs on node -1
[   25.837642] C-Media PCI 0000:07:08.0: PCI INT A -> Link[LNKC] -> GSI 18 (level, low) -> IRQ 18
[   26.011955] ACPI: PCI Interrupt Link [LNEA] enabled at IRQ 17
[   26.011962]   alloc irq_desc for 17 on node -1
[   26.011964]   alloc kstat_irqs on node -1
[   26.011976] nvidia 0000:05:00.0: PCI INT A -> Link[LNEA] -> GSI 17 (level, low) -> IRQ 17
[   26.011984] nvidia 0000:05:00.0: setting latency timer to 64
[   26.012477] ACPI: PCI Interrupt Link [LNEB] enabled at IRQ 16
[   26.012480]   alloc irq_desc for 16 on node -1
[   26.012481]   alloc kstat_irqs on node -1
[   26.012489] nvidia 0000:06:00.0: PCI INT A -> Link[LNEB] -> GSI 16 (level, low) -> IRQ 16
[   26.012493] nvidia 0000:06:00.0: setting latency timer to 64
[   26.012497] vgaarb: device changed decodes: PCI:0000:06:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
[   26.015749] NVRM: loading NVIDIA UNIX x86 Kernel Module  195.36.15  Thu Mar 11 21:41:46 PST 2010
[   26.546815] type=1505 audit(1272806341.584:5):  operation="profile_load" pid=1015 name="/usr/share/gdm/guest-session/Xsession"
[   26.548440] type=1505 audit(1272806341.584:6):  operation="profile_replace" pid=1016 name="/sbin/dhclient3"
[   26.548679] type=1505 audit(1272806341.584:7):  operation="profile_replace" pid=1016 name="/usr/lib/NetworkManager/nm-dhcp-client.action"
[   26.548810] type=1505 audit(1272806341.584:8):  operation="profile_replace" pid=1016 name="/usr/lib/connman/scripts/dhclient-script"
[   26.552262] type=1505 audit(1272806341.588:9):  operation="profile_load" pid=1017 name="/usr/bin/evince"
[   26.555423] type=1505 audit(1272806341.592:10):  operation="profile_load" pid=1017 name="/usr/bin/evince-previewer"
[   26.557329] type=1505 audit(1272806341.596:11):  operation="profile_load" pid=1017 name="/usr/bin/evince-thumbnailer"
[   26.706017]   alloc irq_desc for 33 on node -1
[   26.706021]   alloc kstat_irqs on node -1
[   26.706033] forcedeth 0000:00:10.0: irq 33 for MSI/MSI-X
[   26.709826]   alloc irq_desc for 34 on node -1
[   26.709830]   alloc kstat_irqs on node -1
[   26.709841] forcedeth 0000:00:11.0: irq 34 for MSI/MSI-X
[   26.710040] eth1: no link during initialization.
[   26.710505] ADDRCONF(NETDEV_UP): eth1: link is not ready
[   26.715640] apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
[   26.715644] apm: disabled - APM is not SMP safe.

Fixe 1 : Ubuntu Lucid Lynx 10.04 32 Bits en Machine virtuelle VMWare - Intel Core i7 860 - 8 Go de Ram - ATI Radeon Saphire 5850 - Cate Mere Gigabyte P55A-UD4
Fixe 2 : Ubuntu Lucid Lynx 10.04 32 Bits - AMD X2 64 5000+ - 2 Go de RAM - Geforce 7950 GTX2 - CM K9 Diamond
Portable : Debian Leny 5.04 32 Bits - ThinkPad T41 2373 - Pentium M 1.4 GHz - 512 Mo de Ram - ATI Mobility Radeon 7500

Hors ligne

#19 Le 02/05/2010, à 15:39

grandtoubab

Re : Lucid : Démarrage encore plus lent qu'avant ?

tmeg57 a écrit :

Voici mon mien :

[
[    3.450322] EXT3-fs: mounted filesystem with ordered data mode.
[    4.264270] ieee1394: Host added: ID:BUS[0-00:1023]  GUID[0010dc000108cbd5]
[   24.525272] udev: starting version 151
[   24.529626] Adding 4000176k swap on /dev/sde3.  Priority:-1 extents:1 across:4000176k 
[   24.555852] lp: driver loaded but no devices found
[   24.612682] i2c i2c-0: nForce2 SMBus adapter at 0x2d00
[   24.612701] i2c i2c-1: nForce2 SMBus adapter at 0x2e00
[   24.685595] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[   24.686435] k8temp 0000:00:18.3: Temperature readouts might be wrong - check erratum #141
[   24.701865] w83627ehf: Found W83627EHG chip at 0xa10
[   24.734707] type=1505 audit(1272806339.771:2):  operation="profile_load" pid=628 name="/sbin/dhclient3"
[   24.734927] type=1505 audit(1272806339.771:3):  operation="profile_load" pid=628 name="/usr/lib/NetworkManager/nm-dhcp-client.action"
[   24.735050] type=1505 audit(1272806339.771:4):  operation="profile_load" pid=628 name="/usr/lib/connman/scripts/dhclient-script"
[   24.831849] usblp0: USB Bidirectional printer dev 3 if 0 alt 0 proto 2 vid 0x03F0 pid 0x0904
[   24.831873] usbcore: registered new interface driver usblp
[   24.840547] Linux agpgart interface v0.103
[   24.879010] EXT3 FS on sde5, internal journal
[   24.912052] nvidia: module license 'NVIDIA' taints kernel.
[   24.912057] Disabling lock debugging due to kernel taint
[   25.837622] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 18
[   25.837628]   alloc irq_desc for 18 on node -1
[   25.837630]   alloc kstat_irqs on node -1
[   25.837642] C-Media PCI 0000:07:08.0: PCI INT A -> Link[LNKC] -> GSI 18 (level, low) -> IRQ 18
[   26.011955] ACPI: PCI Interrupt Link [LNEA] enabled at IRQ 17
[   26.011962]   alloc irq_desc for 17 on node -1
[   26.011964]   alloc kstat_irqs on node -1
[   26.011976] nvidia 0000:05:00.0: PCI INT A -> Link[LNEA] -> GSI 17 (level, low) -> IRQ 17
[   26.011984] nvidia 0000:05:00.0: setting latency timer to 64
[   26.012477] ACPI: PCI Interrupt Link [LNEB] enabled at IRQ 16
[   26.012480]   alloc irq_desc for 16 on node -1
[   26.012481]   alloc kstat_irqs on node -1
[   26.012489] nvidia 0000:06:00.0: PCI INT A -> Link[LNEB] -> GSI 16 (level, low) -> IRQ 16
[   26.012493] nvidia 0000:06:00.0: setting latency timer to 64
[   26.012497] vgaarb: device changed decodes: PCI:0000:06:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
[   26.015749] NVRM: loading NVIDIA UNIX x86 Kernel Module  195.36.15  Thu Mar 11 21:41:46 PST 2010
[   26.546815] type=1505 audit(1272806341.584:5):  operation="profile_load" pid=1015 name="/usr/share/gdm/guest-session/Xsession"
[   26.548440] type=1505 audit(1272806341.584:6):  operation="profile_replace" pid=1016 name="/sbin/dhclient3"
[   26.548679] type=1505 audit(1272806341.584:7):  operation="profile_replace" pid=1016 name="/usr/lib/NetworkManager/nm-dhcp-client.action"
[   26.548810] type=1505 audit(1272806341.584:8):  operation="profile_replace" pid=1016 name="/usr/lib/connman/scripts/dhclient-script"
[   26.552262] type=1505 audit(1272806341.588:9):  operation="profile_load" pid=1017 name="/usr/bin/evince"
[   26.555423] type=1505 audit(1272806341.592:10):  operation="profile_load" pid=1017 name="/usr/bin/evince-previewer"
[   26.557329] type=1505 audit(1272806341.596:11):  operation="profile_load" pid=1017 name="/usr/bin/evince-thumbnailer"
[   26.706017]   alloc irq_desc for 33 on node -1
[   26.706021]   alloc kstat_irqs on node -1
[   26.706033] forcedeth 0000:00:10.0: irq 33 for MSI/MSI-X
[   26.709826]   alloc irq_desc for 34 on node -1
[   26.709830]   alloc kstat_irqs on node -1
[   26.709841] forcedeth 0000:00:11.0: irq 34 for MSI/MSI-X
[   26.710040] eth1: no link during initialization.
[   26.710505] ADDRCONF(NETDEV_UP): eth1: link is not ready
[   26.715640] apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
[   26.715644] apm: disabled - APM is not SMP safe.

Boot en 26,71 secondes avec perte de temps avant udev peut-etre à cause de la prise de 4Gb de swap sur sde

Dernière modification par grandtoubab (Le 02/05/2010, à 15:47)


Linux tout seul sur le disque dur  Acer Aspire T650 :=))
RAM: 1,7 Gio, CPU: Intel® Pentium(R) 4 CPU 3.06GHz × 2. Carte graphique Gallium 0.4 on ATI RC410 (Radeon Xpress200)
Partition 1: Debian Jessie & Gnome Version 3.12, Kernel  3.16.3-031603-generic
Partition 2: Ubuntu Trusty 14.04 & Unity

Hors ligne

#20 Le 02/05/2010, à 16:02

nico@nc

Re : Lucid : Démarrage encore plus lent qu'avant ?

De même chez moi, 31 secondes dont un "saut" de 13 secondes avant que ça ne parle de swap :

[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Linux version 2.6.32-21-generic (buildd@rothera) (gcc version 4.4.3 (Ubuntu 4.4.3-4ubuntu5) ) #32-Ubuntu SMP Fri Apr 16 08:10:02 UTC 2010 (Ubuntu 2.6.32-21.32-generic 2.6.32.11+drm33.2)
[    0.000000] KERNEL supported cpus:
[    0.000000]   Intel GenuineIntel
[    0.000000]   AMD AuthenticAMD
[    0.000000]   NSC Geode by NSC
[    0.000000]   Cyrix CyrixInstead
[    0.000000]   Centaur CentaurHauls
[    0.000000]   Transmeta GenuineTMx86
[    0.000000]   Transmeta TransmetaCPU
[    0.000000]   UMC UMC UMC UMC
[    0.000000] BIOS-provided physical RAM map:
[    0.000000]  BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
[    0.000000]  BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
[    0.000000]  BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved)
[    0.000000]  BIOS-e820: 0000000000100000 - 000000007fee0000 (usable)
[    0.000000]  BIOS-e820: 000000007fee0000 - 000000007feea000 (ACPI data)
[    0.000000]  BIOS-e820: 000000007feea000 - 000000007ff00000 (ACPI NVS)
[    0.000000]  BIOS-e820: 000000007ff00000 - 0000000080000000 (reserved)
[    0.000000]  BIOS-e820: 00000000e0000000 - 00000000f0006000 (reserved)
[    0.000000]  BIOS-e820: 00000000f0008000 - 00000000f000c000 (reserved)
[    0.000000]  BIOS-e820: 00000000fed20000 - 00000000fed90000 (reserved)
[    0.000000]  BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
[    0.000000] DMI present.
[    0.000000] Phoenix BIOS detected: BIOS may corrupt low RAM, working around it.
[    0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[    0.000000] last_pfn = 0x7fee0 max_arch_pfn = 0x100000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-CFFFF write-protect
[    0.000000]   D0000-E3FFF uncachable
[    0.000000]   E4000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 000000000 mask F80000000 write-back
[    0.000000]   1 base 07FF00000 mask FFFF00000 uncachable
[    0.000000]   2 disabled
[    0.000000]   3 disabled
[    0.000000]   4 disabled
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000] PAT not supported by CPU.
[    0.000000] Scanning 0 areas for low memory corruption
[    0.000000] modified physical RAM map:
[    0.000000]  modified: 0000000000000000 - 0000000000010000 (reserved)
[    0.000000]  modified: 0000000000010000 - 000000000009f800 (usable)
[    0.000000]  modified: 000000000009f800 - 00000000000a0000 (reserved)
[    0.000000]  modified: 00000000000dc000 - 0000000000100000 (reserved)
[    0.000000]  modified: 0000000000100000 - 000000007fee0000 (usable)
[    0.000000]  modified: 000000007fee0000 - 000000007feea000 (ACPI data)
[    0.000000]  modified: 000000007feea000 - 000000007ff00000 (ACPI NVS)
[    0.000000]  modified: 000000007ff00000 - 0000000080000000 (reserved)
[    0.000000]  modified: 00000000e0000000 - 00000000f0006000 (reserved)
[    0.000000]  modified: 00000000f0008000 - 00000000f000c000 (reserved)
[    0.000000]  modified: 00000000fed20000 - 00000000fed90000 (reserved)
[    0.000000]  modified: 00000000ff000000 - 0000000100000000 (reserved)
[    0.000000] initial memory mapped : 0 - 00c00000
[    0.000000] init_memory_mapping: 0000000000000000-00000000377fe000
[    0.000000] Using x86 segment limits to approximate NX protection
[    0.000000]  0000000000 - 0000400000 page 4k
[    0.000000]  0000400000 - 0037400000 page 2M
[    0.000000]  0037400000 - 00377fe000 page 4k
[    0.000000] kernel direct mapping tables up to 377fe000 @ 10000-15000
[    0.000000] RAMDISK: 37858000 - 37fef64c
[    0.000000] Allocated new RAMDISK: 008de000 - 0107564c
[    0.000000] Move RAMDISK from 0000000037858000 - 0000000037fef64b to 008de000 - 0107564b
[    0.000000] ACPI: RSDP 000f74e0 00014 (v00 PTLTD )
[    0.000000] ACPI: RSDT 7fee5896 00044 (v01   Sony       J1 20060602 PTL  00000000)
[    0.000000] ACPI: APIC 7fee9e78 00068 (v01   Sony       J1 20060602 PTL  0000005F)
[    0.000000] ACPI: FACP 7fee9ee0 00084 (v02   Sony       J1 20060602 PTL  0000005F)
[    0.000000] ACPI: DSDT 7fee632b 03B4D (v01   Sony       J1 20060602 PTL  20030224)
[    0.000000] ACPI: FACS 7fefafc0 00040
[    0.000000] ACPI: BOOT 7fee9fd8 00028 (v01   Sony       J1 20060602 PTL  00000001)
[    0.000000] ACPI: MCFG 7fee9f9c 0003C (v01   Sony       J1 20060602 PTL  0000005F)
[    0.000000] ACPI: SSDT 7fee6153 001D4 (v01   Sony       J1 20060602 PTL  20030224)
[    0.000000] ACPI: SSDT 7fee5d0e 00235 (v01   Sony       J1 20060602 PTL  20030224)
[    0.000000] ACPI: SSDT 7fee5af3 0021B (v01   Sony       J1 20060602 PTL  20030224)
[    0.000000] ACPI: SSDT 7fee58da 00219 (v01   Sony       J1 20060602 PTL  20030224)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] 1158MB HIGHMEM available.
[    0.000000] 887MB LOWMEM available.
[    0.000000]   mapped low ram: 0 - 377fe000
[    0.000000]   low ram: 0 - 377fe000
[    0.000000]   node 0 low ram: 00000000 - 377fe000
[    0.000000]   node 0 bootmap 00011000 - 00017f00
[    0.000000] (9 early reservations) ==> bootmem [0000000000 - 00377fe000]
[    0.000000]   #0 [0000000000 - 0000001000]   BIOS data page ==> [0000000000 - 0000001000]
[    0.000000]   #1 [0000001000 - 0000002000]    EX TRAMPOLINE ==> [0000001000 - 0000002000]
[    0.000000]   #2 [0000006000 - 0000007000]       TRAMPOLINE ==> [0000006000 - 0000007000]
[    0.000000]   #3 [0000100000 - 00008d9e98]    TEXT DATA BSS ==> [0000100000 - 00008d9e98]
[    0.000000]   #4 [000009f800 - 0000100000]    BIOS reserved ==> [000009f800 - 0000100000]
[    0.000000]   #5 [00008da000 - 00008dd184]              BRK ==> [00008da000 - 00008dd184]
[    0.000000]   #6 [0000010000 - 0000011000]          PGTABLE ==> [0000010000 - 0000011000]
[    0.000000]   #7 [00008de000 - 000107564c]      NEW RAMDISK ==> [00008de000 - 000107564c]
[    0.000000]   #8 [0000011000 - 0000018000]          BOOTMAP ==> [0000011000 - 0000018000]
[    0.000000] Zone PFN ranges:
[    0.000000]   DMA      0x00000010 -> 0x00001000
[    0.000000]   Normal   0x00001000 -> 0x000377fe
[    0.000000]   HighMem  0x000377fe -> 0x0007fee0
[    0.000000] Movable zone start PFN for each node
[    0.000000] early_node_map[2] active PFN ranges
[    0.000000]     0: 0x00000010 -> 0x0000009f
[    0.000000]     0: 0x00000100 -> 0x0007fee0
[    0.000000] On node 0 totalpages: 523887
[    0.000000] free_area_init_node: node 0, pgdat c0798720, node_mem_map c1077200
[    0.000000]   DMA zone: 32 pages used for memmap
[    0.000000]   DMA zone: 0 pages reserved
[    0.000000]   DMA zone: 3951 pages, LIFO batch:0
[    0.000000]   Normal zone: 1744 pages used for memmap
[    0.000000]   Normal zone: 221486 pages, LIFO batch:31
[    0.000000]   HighMem zone: 2318 pages used for memmap
[    0.000000]   HighMem zone: 294356 pages, LIFO batch:31
[    0.000000] Using APIC driver default
[    0.000000] ACPI: PM-Timer IO Port: 0x1008
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] disabled)
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[    0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] SMP: Allowing 2 CPUs, 1 hotplug CPUs
[    0.000000] nr_irqs_gsi: 24
[    0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[    0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000dc000
[    0.000000] PM: Registered nosave memory: 00000000000dc000 - 0000000000100000
[    0.000000] Allocating PCI resources starting at 80000000 (gap: 80000000:60000000)
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2 nr_node_ids:1
[    0.000000] PERCPU: Embedded 14 pages/cpu @c2400000 s36024 r0 d21320 u2097152
[    0.000000] pcpu-alloc: s36024 r0 d21320 u2097152 alloc=1*4194304
[    0.000000] pcpu-alloc: [0] 0 1 
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 519793
[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-21-generic root=UUID=579bbda5-b4c7-49ea-aa4a-c9fd53210aa1 ro quiet splash
[    0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] Enabling fast FPU save and restore... done.
[    0.000000] Enabling unmasked SIMD FPU exception support... done.
[    0.000000] Initializing CPU#0
[    0.000000] allocated 10479680 bytes of page_cgroup
[    0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[    0.000000] Initializing HighMem for node 0 (000377fe:0007fee0)
[    0.000000] Memory: 2051124k/2096000k available (4673k kernel code, 43424k reserved, 2122k data, 656k init, 1186696k highmem)
[    0.000000] virtual kernel memory layout:
[    0.000000]     fixmap  : 0xfff1d000 - 0xfffff000   ( 904 kB)
[    0.000000]     pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
[    0.000000]     vmalloc : 0xf7ffe000 - 0xff7fe000   ( 120 MB)
[    0.000000]     lowmem  : 0xc0000000 - 0xf77fe000   ( 887 MB)
[    0.000000]       .init : 0xc07a3000 - 0xc0847000   ( 656 kB)
[    0.000000]       .data : 0xc0590613 - 0xc07a2e48   (2122 kB)
[    0.000000]       .text : 0xc0100000 - 0xc0590613   (4673 kB)
[    0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[    0.000000] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[    0.000000] Hierarchical RCU implementation.
[    0.000000] NR_IRQS:2304 nr_irqs:424
[    0.000000] Console: colour VGA+ 80x25
[    0.000000] console [tty0] enabled
[    0.000000] Fast TSC calibration using PIT
[    0.000000] Detected 1729.206 MHz processor.
[    0.008006] Calibrating delay loop (skipped), value calculated using timer frequency.. 3458.41 BogoMIPS (lpj=6916824)
[    0.008030] Security Framework initialized
[    0.008060] AppArmor: AppArmor initialized
[    0.008070] Mount-cache hash table entries: 512
[    0.008247] Initializing cgroup subsys ns
[    0.008254] Initializing cgroup subsys cpuacct
[    0.008259] Initializing cgroup subsys memory
[    0.008268] Initializing cgroup subsys devices
[    0.008271] Initializing cgroup subsys freezer
[    0.008274] Initializing cgroup subsys net_cls
[    0.008302] CPU: L1 I cache: 32K, L1 D cache: 32K
[    0.008305] CPU: L2 cache: 2048K
[    0.008311] mce: CPU supports 5 MCE banks
[    0.008324] CPU0: Thermal monitoring enabled (TM2)
[    0.008337] Performance Events: p6 PMU driver.
[    0.008346] ... version:                0
[    0.008349] ... bit width:              32
[    0.008351] ... generic registers:      2
[    0.008353] ... value mask:             00000000ffffffff
[    0.008356] ... max period:             000000007fffffff
[    0.008358] ... fixed-purpose events:   0
[    0.008361] ... event mask:             0000000000000003
[    0.008366] Checking 'hlt' instruction... OK.
[    0.024912] SMP alternatives: switching to UP code
[    0.032619] ACPI: Core revision 20090903
[    0.040028] ftrace: converting mcount calls to 0f 1f 44 00 00
[    0.040038] ftrace: allocating 21771 entries in 43 pages
[    0.044068] Enabling APIC mode:  Flat.  Using 1 I/O APICs
[    0.044454] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.087247] CPU0: Intel(R) Pentium(R) M processor 1.73GHz stepping 08
[    0.088001] Brought up 1 CPUs
[    0.088001] Total of 1 processors activated (3458.41 BogoMIPS).
[    0.088001] CPU0 attaching NULL sched-domain.
[    0.088001] devtmpfs: initialized
[    0.088001] regulator: core version 0.5
[    0.088001] Time: 10:58:18  Date: 05/02/10
[    0.088001] NET: Registered protocol family 16
[    0.088001] EISA bus registered
[    0.088001] ACPI: bus type pci registered
[    0.088001] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
[    0.088001] PCI: MCFG area at e0000000 reserved in E820
[    0.088001] PCI: Using MMCONFIG for extended config space
[    0.088001] PCI: Using configuration type 1 for base access
[    0.088001] bio: create slab <bio-0> at 0
[    0.088001] ACPI: EC: Look up EC in DSDT
[    0.192064] ACPI: Interpreter enabled
[    0.192074] ACPI: (supports S0 S3 S4 S5)
[    0.192098] ACPI: Using IOAPIC for interrupt routing
[    0.197403] ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
[    0.197645] ACPI: No dock devices found.
[    0.198227] ACPI: PCI Root Bridge [PCI0] (0000:00)
[    0.198341] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[    0.198345] pci 0000:00:01.0: PME# disabled
[    0.198432] pci 0000:00:1b.0: reg 10 64bit mmio: [0x80000000-0x80003fff]
[    0.198493] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.198498] pci 0000:00:1b.0: PME# disabled
[    0.198557] pci 0000:00:1d.0: reg 20 io port: [0x1800-0x181f]
[    0.198622] pci 0000:00:1d.1: reg 20 io port: [0x1820-0x183f]
[    0.198686] pci 0000:00:1d.2: reg 20 io port: [0x1840-0x185f]
[    0.198751] pci 0000:00:1d.3: reg 20 io port: [0x1860-0x187f]
[    0.198818] pci 0000:00:1d.7: reg 10 32bit mmio: [0x80004000-0x800043ff]
[    0.198880] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[    0.198886] pci 0000:00:1d.7: PME# disabled
[    0.199043] pci 0000:00:1f.0: Force enabled HPET at 0xfed00000
[    0.199051] pci 0000:00:1f.0: quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO
[    0.199056] pci 0000:00:1f.0: quirk: region 1180-11bf claimed by ICH6 GPIO
[    0.199090] pci 0000:00:1f.1: reg 10 io port: [0x00-0x07]
[    0.199098] pci 0000:00:1f.1: reg 14 io port: [0x00-0x03]
[    0.199107] pci 0000:00:1f.1: reg 18 io port: [0x00-0x07]
[    0.199115] pci 0000:00:1f.1: reg 1c io port: [0x00-0x03]
[    0.199124] pci 0000:00:1f.1: reg 20 io port: [0x1880-0x188f]
[    0.199204] pci 0000:00:1f.3: reg 20 io port: [0x18a0-0x18bf]
[    0.199281] pci 0000:01:00.0: reg 10 32bit mmio: [0xa0000000-0xa0ffffff]
[    0.199294] pci 0000:01:00.0: reg 14 64bit mmio pref: [0xc0000000-0xcfffffff]
[    0.199308] pci 0000:01:00.0: reg 1c 64bit mmio: [0x90000000-0x90ffffff]
[    0.199321] pci 0000:01:00.0: reg 30 32bit mmio pref: [0x000000-0x01ffff]
[    0.199413] pci 0000:00:01.0: bridge 32bit mmio: [0x90000000-0xafffffff]
[    0.199417] pci 0000:00:01.0: bridge 32bit mmio pref: [0xc0000000-0xcfffffff]
[    0.199485] pci 0000:06:03.0: reg 10 32bit mmio: [0x000000-0x000fff]
[    0.199520] pci 0000:06:03.0: supports D1 D2
[    0.199523] pci 0000:06:03.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.199529] pci 0000:06:03.0: PME# disabled
[    0.199592] pci 0000:06:03.2: reg 10 32bit mmio: [0xb0004000-0xb00047ff]
[    0.199604] pci 0000:06:03.2: reg 14 32bit mmio: [0xb0000000-0xb0003fff]
[    0.199684] pci 0000:06:03.2: supports D1 D2
[    0.199686] pci 0000:06:03.2: PME# supported from D0 D1 D2 D3hot
[    0.199693] pci 0000:06:03.2: PME# disabled
[    0.199752] pci 0000:06:03.3: reg 10 32bit mmio: [0xb0005000-0xb0005fff]
[    0.199839] pci 0000:06:03.3: supports D1 D2
[    0.199841] pci 0000:06:03.3: PME# supported from D0 D1 D2 D3hot
[    0.199848] pci 0000:06:03.3: PME# disabled
[    0.199917] pci 0000:06:04.0: reg 10 32bit mmio: [0xb0006000-0xb0006fff]
[    0.200010] pci 0000:06:04.0: PME# supported from D0 D3hot D3cold
[    0.200017] pci 0000:06:04.0: PME# disabled
[    0.200083] pci 0000:06:08.0: reg 10 32bit mmio: [0xb0007000-0xb0007fff]
[    0.200095] pci 0000:06:08.0: reg 14 io port: [0x2000-0x203f]
[    0.200170] pci 0000:06:08.0: supports D1 D2
[    0.200173] pci 0000:06:08.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.200179] pci 0000:06:08.0: PME# disabled
[    0.200242] pci 0000:00:1e.0: transparent bridge
[    0.200247] pci 0000:00:1e.0: bridge io port: [0x2000-0x2fff]
[    0.200253] pci 0000:00:1e.0: bridge 32bit mmio: [0xb0000000-0xb00fffff]
[    0.200297] pci_bus 0000:00: on NUMA node 0
[    0.200303] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[    0.200529] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEGP._PRT]
[    0.200645] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
[    0.205387] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
[    0.205494] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 *4 5 6 7 11 12 14 15)
[    0.205598] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 *3 4 5 6 7 10 12 14 15)
[    0.205702] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
[    0.205806] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 *7 10 12 14 15)
[    0.205910] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
[    0.206015] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
[    0.206119] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 *5 6 7 11 12 14 15)
[    0.206232] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[    0.206237] vgaarb: loaded
[    0.206366] SCSI subsystem initialized
[    0.206412] libata version 3.00 loaded.
[    0.206486] usbcore: registered new interface driver usbfs
[    0.206504] usbcore: registered new interface driver hub
[    0.206532] usbcore: registered new device driver usb
[    0.206679] ACPI: WMI: Mapper loaded
[    0.206681] PCI: Using ACPI for IRQ routing
[    0.206852] NetLabel: Initializing
[    0.206854] NetLabel:  domain hash size = 128
[    0.206856] NetLabel:  protocols = UNLABELED CIPSOv4
[    0.206871] NetLabel:  unlabeled traffic allowed by default
[    0.207036] hpet clockevent registered
[    0.207040] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[    0.207048] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[    0.207054] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[    0.212010] Switching to clocksource tsc
[    0.214219] AppArmor: AppArmor Filesystem Enabled
[    0.214231] pnp: PnP ACPI init
[    0.214243] ACPI: bus type pnp registered
[    0.216312] pnp: PnP ACPI: found 8 devices
[    0.216314] ACPI: ACPI bus type pnp unregistered
[    0.216319] PnPBIOS: Disabled by ACPI PNP
[    0.216332] system 00:04: ioport range 0x380-0x383 has been reserved
[    0.216336] system 00:04: ioport range 0x800-0x80f has been reserved
[    0.216339] system 00:04: ioport range 0x1000-0x107f has been reserved
[    0.216343] system 00:04: ioport range 0x1180-0x11bf has been reserved
[    0.216346] system 00:04: ioport range 0x1640-0x164f has been reserved
[    0.216350] system 00:04: ioport range 0xfe00-0xfe7f has been reserved
[    0.216353] system 00:04: ioport range 0xfe80-0xfeff has been reserved
[    0.216357] system 00:04: iomem range 0xf0008000-0xf000bfff has been reserved
[    0.216361] system 00:04: iomem range 0xf0000000-0xf0003fff has been reserved
[    0.216365] system 00:04: iomem range 0xf0005000-0xf0005fff has been reserved
[    0.216368] system 00:04: iomem range 0xf0004000-0xf0004fff has been reserved
[    0.216372] system 00:04: iomem range 0xe0000000-0xefffffff has been reserved
[    0.251091] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
[    0.251094] pci 0000:00:01.0:   IO window: disabled
[    0.251099] pci 0000:00:01.0:   MEM window: 0x90000000-0xafffffff
[    0.251103] pci 0000:00:01.0:   PREFETCH window: 0xc0000000-0xcfffffff
[    0.251116] pci 0000:06:03.0: CardBus bridge, secondary bus 0000:07
[    0.251118] pci 0000:06:03.0:   IO window: 0x002400-0x0024ff
[    0.251126] pci 0000:06:03.0:   IO window: 0x002800-0x0028ff
[    0.251133] pci 0000:06:03.0:   PREFETCH window: 0x84000000-0x87ffffff
[    0.251140] pci 0000:06:03.0:   MEM window: 0x88000000-0x8bffffff
[    0.251147] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:06
[    0.251151] pci 0000:00:1e.0:   IO window: 0x2000-0x2fff
[    0.251158] pci 0000:00:1e.0:   MEM window: 0xb0000000-0xb00fffff
[    0.251164] pci 0000:00:1e.0:   PREFETCH window: 0x84000000-0x87ffffff
[    0.251180]   alloc irq_desc for 16 on node -1
[    0.251183]   alloc kstat_irqs on node -1
[    0.251189] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    0.251194] pci 0000:00:01.0: setting latency timer to 64
[    0.251202] pci 0000:00:1e.0: setting latency timer to 64
[    0.251215] pci 0000:06:03.0: enabling device (0000 -> 0003)
[    0.251222] pci 0000:06:03.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    0.251234] pci_bus 0000:00: resource 0 io:  [0x00-0xffff]
[    0.251237] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff]
[    0.251241] pci_bus 0000:01: resource 1 mem: [0x90000000-0xafffffff]
[    0.251244] pci_bus 0000:01: resource 2 pref mem [0xc0000000-0xcfffffff]
[    0.251247] pci_bus 0000:06: resource 0 io:  [0x2000-0x2fff]
[    0.251251] pci_bus 0000:06: resource 1 mem: [0xb0000000-0xb00fffff]
[    0.251254] pci_bus 0000:06: resource 2 pref mem [0x84000000-0x87ffffff]
[    0.251257] pci_bus 0000:06: resource 3 io:  [0x00-0xffff]
[    0.251260] pci_bus 0000:06: resource 4 mem: [0x000000-0xffffffff]
[    0.251263] pci_bus 0000:07: resource 0 io:  [0x2400-0x24ff]
[    0.251266] pci_bus 0000:07: resource 1 io:  [0x2800-0x28ff]
[    0.251270] pci_bus 0000:07: resource 2 pref mem [0x84000000-0x87ffffff]
[    0.251273] pci_bus 0000:07: resource 3 mem: [0x88000000-0x8bffffff]
[    0.251307] NET: Registered protocol family 2
[    0.251407] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.251745] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.252651] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[    0.253228] TCP: Hash tables configured (established 131072 bind 65536)
[    0.253231] TCP reno registered
[    0.253376] NET: Registered protocol family 1
[    0.253513] pci 0000:01:00.0: Boot video device
[    0.253538] pci 0000:06:08.0: Firmware left e100 interrupts enabled; disabling
[    0.253650] Simple Boot Flag at 0x36 set to 0x1
[    0.253750] cpufreq-nforce2: No nForce2 chipset.
[    0.253783] Scanning for low memory corruption every 60 seconds
[    0.253910] audit: initializing netlink socket (disabled)
[    0.253924] type=2000 audit(1272797898.251:1): initialized
[    0.265931] Trying to unpack rootfs image as initramfs...
[    0.280213] highmem bounce pool size: 64 pages
[    0.280220] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[    0.282006] VFS: Disk quotas dquot_6.5.2
[    0.282071] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    0.288309] fuse init (API version 7.13)
[    0.288424] msgmni has been set to 1690
[    0.288672] alg: No test for stdrng (krng)
[    0.288741] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[    0.288745] io scheduler noop registered
[    0.288747] io scheduler anticipatory registered
[    0.288749] io scheduler deadline registered
[    0.288797] io scheduler cfq registered (default)
[    0.288941]   alloc irq_desc for 24 on node -1
[    0.288944]   alloc kstat_irqs on node -1
[    0.288955] pcieport 0000:00:01.0: irq 24 for MSI/MSI-X
[    0.288962] pcieport 0000:00:01.0: setting latency timer to 64
[    0.289038] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    0.289066] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    0.290208] ACPI: AC Adapter [ADP1] (on-line)
[    0.290292] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0
[    0.291271] ACPI: Lid Switch [LID0]
[    0.291325] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
[    0.291332] ACPI: Power Button [PWRB]
[    0.291392] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[    0.291396] ACPI: Power Button [PWRF]
[    0.519958] Freeing initrd memory: 7773k freed
[    1.292194] Marking TSC unstable due to TSC halts in idle
[    1.292287] processor LNXCPU:00: registered as cooling_device0
[    1.292552] Switching to clocksource hpet
[    1.295965] thermal LNXTHERM:01: registered as thermal_zone0
[    1.295975] ACPI: Thermal Zone [THRM] (42 C)
[    1.298073] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    1.298626] isapnp: Scanning for PnP cards...
[    1.305412] brd: module loaded
[    1.306066] loop: module loaded
[    1.306356] input: Macintosh mouse button emulation as /devices/virtual/input/input3
[    1.306511] ata_piix 0000:00:1f.1: version 2.13
[    1.306530]   alloc irq_desc for 18 on node -1
[    1.306532]   alloc kstat_irqs on node -1
[    1.306541] ata_piix 0000:00:1f.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[    1.306591] ata_piix 0000:00:1f.1: setting latency timer to 64
[    1.306690] scsi0 : ata_piix
[    1.306776] scsi1 : ata_piix
[    1.307495] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x1880 irq 14
[    1.307499] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x1888 irq 15
[    1.307977] Fixed MDIO Bus: probed
[    1.308045] PPP generic driver version 2.4.2
[    1.308160] tun: Universal TUN/TAP device driver, 1.6
[    1.308163] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[    1.308252] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.308274]   alloc irq_desc for 23 on node -1
[    1.308276]   alloc kstat_irqs on node -1
[    1.308282] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[    1.308301] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[    1.308305] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[    1.308359] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
[    1.308395] ehci_hcd 0000:00:1d.7: debug port 1
[    1.312287] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[    1.356200] ata2: port disabled. ignoring.
[    1.356226] ehci_hcd 0000:00:1d.7: irq 23, io mem 0x80004000
[    1.360149] ACPI: Battery Slot [BAT0] (battery present)
[    1.403878] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[    1.403991] usb usb1: configuration #1 chosen from 1 choice
[    1.404038] hub 1-0:1.0: USB hub found
[    1.404048] hub 1-0:1.0: 8 ports detected
[    1.404125] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    1.404166] uhci_hcd: USB Universal Host Controller Interface driver
[    1.404195] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[    1.404202] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[    1.404207] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[    1.404240] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[    1.404267] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00001800
[    1.404366] usb usb2: configuration #1 chosen from 1 choice
[    1.404395] hub 2-0:1.0: USB hub found
[    1.404403] hub 2-0:1.0: 2 ports detected
[    1.404453]   alloc irq_desc for 19 on node -1
[    1.404455]   alloc kstat_irqs on node -1
[    1.404461] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[    1.404470] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[    1.404474] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[    1.404506] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[    1.404542] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00001820
[    1.404636] usb usb3: configuration #1 chosen from 1 choice
[    1.404665] hub 3-0:1.0: USB hub found
[    1.404672] hub 3-0:1.0: 2 ports detected
[    1.404721] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[    1.404728] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[    1.404732] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[    1.404764] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[    1.404799] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001840
[    1.404899] usb usb4: configuration #1 chosen from 1 choice
[    1.404932] hub 4-0:1.0: USB hub found
[    1.404943] hub 4-0:1.0: 2 ports detected
[    1.404990] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16
[    1.404997] uhci_hcd 0000:00:1d.3: setting latency timer to 64
[    1.405001] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[    1.405041] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
[    1.405076] uhci_hcd 0000:00:1d.3: irq 16, io base 0x00001860
[    1.405179] usb usb5: configuration #1 chosen from 1 choice
[    1.405210] hub 5-0:1.0: USB hub found
[    1.405218] hub 5-0:1.0: 2 ports detected
[    1.405316] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[    1.408420] i8042.c: Detected active multiplexing controller, rev 1.1.
[    1.412321] serio: i8042 KBD port at 0x60,0x64 irq 1
[    1.412333] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[    1.412362] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[    1.412391] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[    1.412415] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[    1.412530] mice: PS/2 mouse device common for all mice
[    1.412739] rtc_cmos 00:05: RTC can wake from S4
[    1.412781] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
[    1.412813] rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[    1.413023] device-mapper: uevent: version 1.0.3
[    1.413130] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com
[    1.413209] device-mapper: multipath: version 1.1.0 loaded
[    1.413213] device-mapper: multipath round-robin: version 1.0.0 loaded
[    1.413349] EISA: Probing bus 0 at eisa.0
[    1.413358] Cannot allocate resource for EISA slot 1
[    1.413360] Cannot allocate resource for EISA slot 2
[    1.413390] EISA: Detected 0 cards.
[    1.413468] cpuidle: using governor ladder
[    1.413547] cpuidle: using governor menu
[    1.414025] TCP cubic registered
[    1.414204] NET: Registered protocol family 10
[    1.414703] lo: Disabled Privacy Extensions
[    1.415046] NET: Registered protocol family 17
[    1.415311] Using IPI No-Shortcut mode
[    1.415403] PM: Resume from disk failed.
[    1.415417] registered taskstats version 1
[    1.415751]   Magic number: 10:643:981
[    1.415833] rtc_cmos 00:05: setting system clock to 2010-05-02 10:58:20 UTC (1272797900)
[    1.415837] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    1.415839] EDD information not available.
[    1.679469] isapnp: No Plug & Play device found
[    1.679484] ata1.00: ATA-6: HTS541010G9AT00, MBZOA60A, max UDMA/100
[    1.679488] ata1.00: 195371568 sectors, multi 16: LBA48 
[    1.679530] ata1.01: ATAPI: MATSHITAUJ-841D, 1.11, max UDMA/33
[    1.682139] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
[    1.692566] ata1.00: configured for UDMA/100
[    1.708457] ata1.01: configured for UDMA/33
[    1.708995] scsi 0:0:0:0: Direct-Access     ATA      HTS541010G9AT00  MBZO PQ: 0 ANSI: 5
[    1.709129] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    1.711055] sd 0:0:0:0: [sda] 195371568 512-byte logical blocks: (100 GB/93.1 GiB)
[    1.711110] sd 0:0:0:0: [sda] Write Protect is off
[    1.711113] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    1.711140] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.711226] scsi 0:0:1:0: CD-ROM            MATSHITA UJ-841D          1.11 PQ: 0 ANSI: 5
[    1.712475]  sda: sda1 sda2 sda3 sda4 < sda5 >
[    1.779743] sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray
[    1.779747] Uniform CD-ROM driver Revision: 3.20
[    1.779823] sr 0:0:1:0: Attached scsi CD-ROM sr0
[    1.779871] sr 0:0:1:0: Attached scsi generic sg1 type 5
[    1.779996] sd 0:0:0:0: [sda] Attached SCSI disk
[    1.780026] Freeing unused kernel memory: 656k freed
[    1.780416] Write protecting the kernel text: 4676k
[    1.780457] Write protecting the kernel read-only data: 1840k
[    1.789100] usb 1-1: new high speed USB device using ehci_hcd and address 2
[    1.797643] udev: starting version 151
[    1.922387] usb 1-1: configuration #1 chosen from 1 choice
[    2.031497] e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI
[    2.031502] e100: Copyright(c) 1999-2006 Intel Corporation
[    2.031556]   alloc irq_desc for 20 on node -1
[    2.031559]   alloc kstat_irqs on node -1
[    2.031568] e100 0000:06:08.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[    2.064128] e100 0000:06:08.0: PME# disabled
[    2.077755] Initializing USB Mass Storage driver...
[    2.078145] scsi2 : SCSI emulation for USB Mass Storage devices
[    2.078309] usbcore: registered new interface driver usb-storage
[    2.078312] USB Mass Storage support registered.
[    2.078652] usb-storage: device found at 2
[    2.078655] usb-storage: waiting for device to settle before scanning
[    2.079332] e100: eth0: e100_probe: addr 0xb0007000, irq 20, MAC addr 00:01:4a:f0:f5:0a
[    2.079363] ohci1394 0000:06:03.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[    2.132076] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[18]  MMIO=[b0004000-b00047ff]  Max Packet=[2048]  IR/IT contexts=[4/8]
[    2.376036] usb 3-1: new full speed USB device using uhci_hcd and address 2
[    2.379059] EXT4-fs (sda5): mounted filesystem with ordered data mode
[    2.561699] usb 3-1: configuration #1 chosen from 1 choice
[    3.404146] ieee1394: Host added: ID:BUS[0-00:1023]  GUID[080046030200894a]
[    7.076193] usb-storage: device scan complete
[    7.076699] scsi 2:0:0:0: Direct-Access     USB_DISK USB_DISK         1.00 PQ: 0 ANSI: 2
[    7.077259] sd 2:0:0:0: Attached scsi generic sg2 type 0
[    7.077907] sd 2:0:0:0: [sdb] 2010112 512-byte logical blocks: (1.02 GB/981 MiB)
[    7.078403] sd 2:0:0:0: [sdb] Write Protect is off
[    7.078407] sd 2:0:0:0: [sdb] Mode Sense: 23 00 00 00
[    7.078410] sd 2:0:0:0: [sdb] Assuming drive cache: write through
[    7.080403] sd 2:0:0:0: [sdb] Assuming drive cache: write through
[    7.080407]  sdb: sdb1
[    7.183653] sd 2:0:0:0: [sdb] Assuming drive cache: write through
[    7.183657] sd 2:0:0:0: [sdb] Attached SCSI removable disk
[   20.092766] Adding 128512k swap on /dev/sda3.  Priority:-1 extents:1 across:128512k 
[   20.782821] udev: starting version 151
[   21.613005] type=1505 audit(1272790720.696:2):  operation="profile_load" pid=559 name="/sbin/dhclient3"
[   21.613698] type=1505 audit(1272790720.696:3):  operation="profile_load" pid=559 name="/usr/lib/NetworkManager/nm-dhcp-client.action"
[   21.614075] type=1505 audit(1272790720.696:4):  operation="profile_load" pid=559 name="/usr/lib/connman/scripts/dhclient-script"
[   21.640070] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A03:00/device:00/LNXVIDEO:00/input/input5
[   21.640210] ACPI: Video Device [NGFX] (multi-head: yes  rom: no  post: no)
[   21.809316] Linux agpgart interface v0.103
[   21.821294] sony-laptop: Sony Notebook Control Driver v0.6.
[   21.821501] input: Sony Vaio Keys as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A03:00/device:15/SNY5001:00/input/input6
[   21.821947] input: Sony Vaio Jogdial as /devices/virtual/input/input7
[   21.902962] usbcore: registered new interface driver hiddev
[   21.907400] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.1/usb3/3-1/3-1:1.0/input/input8
[   21.908128] generic-usb 0003:046D:C52B.0001: input,hidraw0: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-0000:00:1d.1-1/input0
[   21.911804] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.1/usb3/3-1/3-1:1.1/input/input9
[   21.911974] generic-usb 0003:046D:C52B.0002: input,hiddev96,hidraw1: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:1d.1-1/input1
[   21.919684] generic-usb 0003:046D:C52B.0003: hiddev97,hidraw2: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:1d.1-1/input2
[   21.919722] usbcore: registered new interface driver usbhid
[   21.919726] usbhid: v2.6:USB HID core driver
[   22.131426] intel_rng: FWH not detected
[   22.143752] lp: driver loaded but no devices found
[   22.229007] lib80211: common routines for IEEE802.11 drivers
[   22.229012] lib80211_crypt: registered algorithm 'NULL'
[   22.296052] ieee80211: 802.11 data/management/control stack, git-1.1.13
[   22.296056] ieee80211: Copyright (C) 2004-2005 Intel Corporation <jketreno@linux.intel.com>
[   22.335100] ipw2200: Intel(R) PRO/Wireless 2200/2915 Network Driver, 1.2.2kmprq
[   22.335104] ipw2200: Copyright(c) 2003-2006 Intel Corporation
[   22.335182]   alloc irq_desc for 22 on node -1
[   22.335185]   alloc kstat_irqs on node -1
[   22.335193] ipw2200 0000:06:04.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[   22.335267] ipw2200: Detected Intel PRO/Wireless 2200BG Network Connection
[   22.335321] ipw2200 0000:06:04.0: firmware: requesting ipw2200-bss.fw
[   22.726603] ipw2200: Detected geography ZZD (13 802.11bg channels, 0 802.11a channels)
[   22.726643]   alloc irq_desc for 17 on node -1
[   22.726646]   alloc kstat_irqs on node -1
[   22.726654] tifm_7xx1 0000:06:03.3: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[   22.726961] yenta_cardbus 0000:06:03.0: CardBus bridge found [104d:818f]
[   22.726988] yenta_cardbus 0000:06:03.0: Enabling burst memory read transactions
[   22.726996] yenta_cardbus 0000:06:03.0: Using CSCINT to route CSC interrupts to PCI
[   22.726999] yenta_cardbus 0000:06:03.0: Routing CardBus interrupts to PCI
[   22.727006] yenta_cardbus 0000:06:03.0: TI: mfunc 0x01001b22, devctl 0x64
[   22.748041] tifm_core: MMC/SD card detected in socket 0:0
[   22.765474] vga16fb: initializing
[   22.765479] vga16fb: mapped to 0xc00a0000
[   22.765599] fb0: VGA16 VGA frame buffer device
[   22.841472] input: PS/2 Mouse as /devices/platform/i8042/serio4/input/input10
[   22.856949] input: AlpsPS/2 ALPS GlidePoint as /devices/platform/i8042/serio4/input/input11
[   22.956830] yenta_cardbus 0000:06:03.0: ISA IRQ mask 0x0cf8, PCI irq 16
[   22.956837] yenta_cardbus 0000:06:03.0: Socket status: 30000006
[   22.956841] pci_bus 0000:06: Raising subordinate bus# of parent bus (#06) from #07 to #0a
[   22.956854] yenta_cardbus 0000:06:03.0: pcmcia: parent PCI bridge I/O window: 0x2000 - 0x2fff
[   22.956859] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x2000-0x2fff: clean.
[   22.957088] yenta_cardbus 0000:06:03.0: pcmcia: parent PCI bridge Memory window: 0xb0000000 - 0xb00fffff
[   22.957092] yenta_cardbus 0000:06:03.0: pcmcia: parent PCI bridge Memory window: 0x84000000 - 0x87ffffff
[   23.993894] nvidia: module license 'NVIDIA' taints kernel.
[   23.993901] Disabling lock debugging due to kernel taint
[   25.511198] nvidia 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[   25.511212] nvidia 0000:01:00.0: setting latency timer to 64
[   25.511218] vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
[   25.511981] NVRM: loading NVIDIA UNIX x86 Kernel Module  195.36.15  Thu Mar 11 21:41:46 PST 2010
[   25.978865] Console: switching to colour frame buffer device 80x30
[   26.069715] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x100-0x3af: clean.
[   26.072060] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7
[   26.073052] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x820-0x8ff: clean.
[   26.073873] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xc00-0xcf7: clean.
[   26.074883] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xa00-0xaff: clean.
[   26.655294] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[   26.655328] HDA Intel 0000:00:1b.0: setting latency timer to 64
[   26.991176] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input12
[   27.726522] kjournald starting.  Commit interval 5 seconds
[   27.753434] EXT3 FS on sda2, internal journal
[   27.753441] EXT3-fs: mounted filesystem with ordered data mode.
[   30.878766] type=1505 audit(1272790729.960:5):  operation="profile_load" pid=829 name="/usr/share/gdm/guest-session/Xsession"
[   30.881348] type=1505 audit(1272790729.964:6):  operation="profile_replace" pid=830 name="/sbin/dhclient3"
[   30.882052] type=1505 audit(1272790729.964:7):  operation="profile_replace" pid=830 name="/usr/lib/NetworkManager/nm-dhcp-client.action"
[   30.882433] type=1505 audit(1272790729.964:8):  operation="profile_replace" pid=830 name="/usr/lib/connman/scripts/dhclient-script"
[   30.887357] type=1505 audit(1272790729.968:9):  operation="profile_load" pid=832 name="/usr/bin/evince"
[   30.902683] type=1505 audit(1272790729.984:10):  operation="profile_load" pid=832 name="/usr/bin/evince-previewer"
[   30.909333] type=1505 audit(1272790729.992:11):  operation="profile_load" pid=832 name="/usr/bin/evince-thumbnailer"
[   30.917142] type=1505 audit(1272790730.000:12):  operation="profile_load" pid=836 name="/usr/lib/cups/backend/cups-pdf"
[   30.917989] type=1505 audit(1272790730.000:13):  operation="profile_load" pid=836 name="/usr/sbin/cupsd"
[   31.033259] type=1505 audit(1272790730.116:14):  operation="profile_load" pid=837 name="/usr/sbin/mysqld-akonadi"

Nicolas (sous Lucid)
☞ http://nicopensource.free.fr/
☛ Un problème avec Firefox, Thunderbird, ... ? Direction Geckozone !

Hors ligne

#21 Le 02/05/2010, à 16:18

grandtoubab

Re : Lucid : Démarrage encore plus lent qu'avant ?

je n'y connais rien de plus, voici l'architecture de mes filesystem en Ext4

@ubuntu-desktop:~$ df -T
Sys. de fich. Type   1K-blocs       Occupé Disponible Capacité Monté sur
/dev/sda3     ext4    10160468   5521616   4126784  58% /
none      devtmpfs      185264       288    184976   1% /dev
none         tmpfs      189676       212    189464   1% /dev/shm
none         tmpfs      189676       108    189568   1% /var/run
none         tmpfs      189676         0    189676   0% /var/lock
none         tmpfs      189676         0    189676   0% /lib/init/rw
/dev/sda2  fuseblk    94847756  60170276  34677480  64% /media/ACERDATA
/dev/sda6     ext4    19308816  11964960   6370724  66% /home
@ubuntu-desktop:~$ sudo fdisk -l

Disque /dev/sda: 160.0 Go, 160041885696 octets
255 têtes, 63 secteurs/piste, 19457 cylindres
Unités = cylindres de 16065 * 512 = 8225280 octets
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Identifiant de disque : 0x67df67df

Périphérique Amorce  Début        Fin      Blocs     Id  Système
/dev/sda1   *          62        3824    30226297+   7  HPFS/NTFS
/dev/sda2            7650       19457    94847760    7  HPFS/NTFS
/dev/sda3            3825        5099    10241437+  83  Linux
/dev/sda4            5100        7649    20482875    5  Etendue
/dev/sda5            5100        5226     1020096   82  Linux swap / Solaris
/dev/sda6            5227        7649    19462716   83  Linux

Les entrées de la table de partitions ne sont pas dans l'ordre du disque

Linux tout seul sur le disque dur  Acer Aspire T650 :=))
RAM: 1,7 Gio, CPU: Intel® Pentium(R) 4 CPU 3.06GHz × 2. Carte graphique Gallium 0.4 on ATI RC410 (Radeon Xpress200)
Partition 1: Debian Jessie & Gnome Version 3.12, Kernel  3.16.3-031603-generic
Partition 2: Ubuntu Trusty 14.04 & Unity

Hors ligne

#22 Le 02/05/2010, à 16:43

Philou_philou

Re : Lucid : Démarrage encore plus lent qu'avant ?

Bonjour,

Depuis la mise à jour sur Lucid Lynx, j'ai le même soucis. Un saut d'une quinzaine de secondes avant la prise en charge du swap. J'ai tout le système en ext4 et je suis en simple boot only Ubuntu grub2 depuis Karmic.

Je suis le sujet avec attention, merci d'avance pour votre aide!
Philou_philou.


Slackware 13.37 sur Laptop Asus Z53s KDE 4.6.5
Slackware 13.1 sur laptop Sony antédiluvien XFCE 4.6

Hors ligne

#23 Le 02/05/2010, à 18:20

tmeg57

Re : Lucid : Démarrage encore plus lent qu'avant ?


Fixe 1 : Ubuntu Lucid Lynx 10.04 32 Bits en Machine virtuelle VMWare - Intel Core i7 860 - 8 Go de Ram - ATI Radeon Saphire 5850 - Cate Mere Gigabyte P55A-UD4
Fixe 2 : Ubuntu Lucid Lynx 10.04 32 Bits - AMD X2 64 5000+ - 2 Go de RAM - Geforce 7950 GTX2 - CM K9 Diamond
Portable : Debian Leny 5.04 32 Bits - ThinkPad T41 2373 - Pentium M 1.4 GHz - 512 Mo de Ram - ATI Mobility Radeon 7500

Hors ligne

#24 Le 02/05/2010, à 18:31

tmeg57

Re : Lucid : Démarrage encore plus lent qu'avant ?

grandtoubab a écrit :

Boot en 26,71 secondes avec perte de temps avant udev peut-etre à cause de la prise de 4Gb de swap sur sde

J'ai diminué par 4 la taille du swap soit de 4 Go à 512 Mo mais je n'ai absolument aucun gain en performance.

[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Linux version 2.6.32-21-generic (buildd@rothera) (gcc version 4.4.3 (Ubuntu 4.4.3-4ubuntu5) ) #32-Ubuntu SMP Fri Apr 16 08:10:02 UTC 2010 (Ubuntu 2.6.32-21.32-generic 2.6.32.11+drm33.2)
[    0.000000] KERNEL supported cpus:
[    0.000000]   Intel GenuineIntel
[    0.000000]   AMD AuthenticAMD
[    0.000000]   NSC Geode by NSC
[    0.000000]   Cyrix CyrixInstead
[    0.000000]   Centaur CentaurHauls
[    0.000000]   Transmeta GenuineTMx86
[    0.000000]   Transmeta TransmetaCPU
[    0.000000]   UMC UMC UMC UMC
[    0.000000] BIOS-provided physical RAM map:
[    0.000000]  BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[    0.000000]  BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[    0.000000]  BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[    0.000000]  BIOS-e820: 0000000000100000 - 000000007ffd0000 (usable)
[    0.000000]  BIOS-e820: 000000007ffd0000 - 000000007ffde000 (ACPI data)
[    0.000000]  BIOS-e820: 000000007ffde000 - 0000000080000000 (ACPI NVS)
[    0.000000]  BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
[    0.000000]  BIOS-e820: 00000000fee00000 - 00000000fef00000 (reserved)
[    0.000000]  BIOS-e820: 00000000ff780000 - 0000000100000000 (reserved)
[    0.000000] DMI present.
[    0.000000] last_pfn = 0x7ffd0 max_arch_pfn = 0x100000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-EFFFF uncachable
[    0.000000]   F0000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 0000000000 mask FF80000000 write-back
[    0.000000]   1 disabled
[    0.000000]   2 disabled
[    0.000000]   3 disabled
[    0.000000]   4 disabled
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[    0.000000] e820 update range: 0000000000002000 - 0000000000006000 (usable) ==> (reserved)
[    0.000000] Scanning 1 areas for low memory corruption
[    0.000000] modified physical RAM map:
[    0.000000]  modified: 0000000000000000 - 0000000000002000 (usable)
[    0.000000]  modified: 0000000000002000 - 0000000000006000 (reserved)
[    0.000000]  modified: 0000000000006000 - 000000000009fc00 (usable)
[    0.000000]  modified: 000000000009fc00 - 00000000000a0000 (reserved)
[    0.000000]  modified: 00000000000e0000 - 0000000000100000 (reserved)
[    0.000000]  modified: 0000000000100000 - 000000007ffd0000 (usable)
[    0.000000]  modified: 000000007ffd0000 - 000000007ffde000 (ACPI data)
[    0.000000]  modified: 000000007ffde000 - 0000000080000000 (ACPI NVS)
[    0.000000]  modified: 00000000fec00000 - 00000000fec01000 (reserved)
[    0.000000]  modified: 00000000fee00000 - 00000000fef00000 (reserved)
[    0.000000]  modified: 00000000ff780000 - 0000000100000000 (reserved)
[    0.000000] initial memory mapped : 0 - 00c00000
[    0.000000] init_memory_mapping: 0000000000000000-00000000377fe000
[    0.000000] Using x86 segment limits to approximate NX protection
[    0.000000]  0000000000 - 0000400000 page 4k
[    0.000000]  0000400000 - 0037400000 page 2M
[    0.000000]  0037400000 - 00377fe000 page 4k
[    0.000000] kernel direct mapping tables up to 377fe000 @ 7000-c000
[    0.000000] RAMDISK: 37406000 - 37feff96
[    0.000000] Allocated new RAMDISK: 008de000 - 014c7f96
[    0.000000] Move RAMDISK from 0000000037406000 - 0000000037feff95 to 008de000 - 014c7f95
[    0.000000] ACPI: RSDP 000f89d0 00014 (v00 ACPIAM)
[    0.000000] ACPI: RSDT 7ffd0000 00038 (v01 A M I  OEMRSDT  10000827 MSFT 00000097)
[    0.000000] ACPI: FACP 7ffd0200 00084 (v02 A M I  OEMFACP  10000827 MSFT 00000097)
[    0.000000] ACPI: DSDT 7ffd0440 04FB4 (v01  1AAAA 1AAAA000 00000000 INTL 20051117)
[    0.000000] ACPI: FACS 7ffde000 00040
[    0.000000] ACPI: APIC 7ffd0390 00070 (v01 A M I  OEMAPIC  10000827 MSFT 00000097)
[    0.000000] ACPI: MCFG 7ffd0400 0003C (v01 A M I  OEMMCFG  10000827 MSFT 00000097)
[    0.000000] ACPI: OEMB 7ffde040 00060 (v01 A M I  AMI_OEM  10000827 MSFT 00000097)
[    0.000000] ACPI: HPET 7ffd5400 00038 (v01 A M I  OEMHPET0 10000827 MSFT 00000097)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] 1159MB HIGHMEM available.
[    0.000000] 887MB LOWMEM available.
[    0.000000]   mapped low ram: 0 - 377fe000
[    0.000000]   low ram: 0 - 377fe000
[    0.000000]   node 0 low ram: 00000000 - 377fe000
[    0.000000]   node 0 bootmap 00008000 - 0000ef00
[    0.000000] (9 early reservations) ==> bootmem [0000000000 - 00377fe000]
[    0.000000]   #0 [0000000000 - 0000001000]   BIOS data page ==> [0000000000 - 0000001000]
[    0.000000]   #1 [0000001000 - 0000002000]    EX TRAMPOLINE ==> [0000001000 - 0000002000]
[    0.000000]   #2 [0000006000 - 0000007000]       TRAMPOLINE ==> [0000006000 - 0000007000]
[    0.000000]   #3 [0000100000 - 00008d9e98]    TEXT DATA BSS ==> [0000100000 - 00008d9e98]
[    0.000000]   #4 [000009fc00 - 0000100000]    BIOS reserved ==> [000009fc00 - 0000100000]
[    0.000000]   #5 [00008da000 - 00008dd144]              BRK ==> [00008da000 - 00008dd144]
[    0.000000]   #6 [0000007000 - 0000008000]          PGTABLE ==> [0000007000 - 0000008000]
[    0.000000]   #7 [00008de000 - 00014c7f96]      NEW RAMDISK ==> [00008de000 - 00014c7f96]
[    0.000000]   #8 [0000008000 - 000000f000]          BOOTMAP ==> [0000008000 - 000000f000]
[    0.000000] found SMP MP-table at [c00ff780] ff780
[    0.000000] Zone PFN ranges:
[    0.000000]   DMA      0x00000000 -> 0x00001000
[    0.000000]   Normal   0x00001000 -> 0x000377fe
[    0.000000]   HighMem  0x000377fe -> 0x0007ffd0
[    0.000000] Movable zone start PFN for each node
[    0.000000] early_node_map[3] active PFN ranges
[    0.000000]     0: 0x00000000 -> 0x00000002
[    0.000000]     0: 0x00000006 -> 0x0000009f
[    0.000000]     0: 0x00000100 -> 0x0007ffd0
[    0.000000] On node 0 totalpages: 524139
[    0.000000] free_area_init_node: node 0, pgdat c0798720, node_mem_map c14c9000
[    0.000000]   DMA zone: 32 pages used for memmap
[    0.000000]   DMA zone: 0 pages reserved
[    0.000000]   DMA zone: 3963 pages, LIFO batch:0
[    0.000000]   Normal zone: 1744 pages used for memmap
[    0.000000]   Normal zone: 221486 pages, LIFO batch:31
[    0.000000]   HighMem zone: 2320 pages used for memmap
[    0.000000]   HighMem zone: 294594 pages, LIFO batch:31
[    0.000000] Using APIC driver default
[    0.000000] Detected use of extended apic ids on hypertransport bus
[    0.000000] ACPI: PM-Timer IO Port: 0x2008
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[    0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] ACPI: IRQ14 used by override.
[    0.000000] ACPI: IRQ15 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x10de8201 base: 0xfed00000
[    0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
[    0.000000] nr_irqs_gsi: 24
[    0.000000] PM: Registered nosave memory: 0000000000002000 - 0000000000006000
[    0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[    0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
[    0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
[    0.000000] Allocating PCI resources starting at 80000000 (gap: 80000000:7ec00000)
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2 nr_node_ids:1
[    0.000000] PERCPU: Embedded 14 pages/cpu @c2800000 s36024 r0 d21320 u2097152
[    0.000000] pcpu-alloc: s36024 r0 d21320 u2097152 alloc=1*4194304
[    0.000000] pcpu-alloc: [0] 0 1 
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 520043
[    0.000000] Kernel command line: root=UUID=5f8b9389-1187-4cc0-8242-61aa60b28272 ro 
[    0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] Enabling fast FPU save and restore... done.
[    0.000000] Enabling unmasked SIMD FPU exception support... done.
[    0.000000] Initializing CPU#0
[    0.000000] allocated 10484800 bytes of page_cgroup
[    0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[    0.000000] Initializing HighMem for node 0 (000377fe:0007ffd0)
[    0.000000] Memory: 2047676k/2096960k available (4673k kernel code, 47860k reserved, 2122k data, 656k init, 1187656k highmem)
[    0.000000] virtual kernel memory layout:
[    0.000000]     fixmap  : 0xfff1d000 - 0xfffff000   ( 904 kB)
[    0.000000]     pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
[    0.000000]     vmalloc : 0xf7ffe000 - 0xff7fe000   ( 120 MB)
[    0.000000]     lowmem  : 0xc0000000 - 0xf77fe000   ( 887 MB)
[    0.000000]       .init : 0xc07a3000 - 0xc0847000   ( 656 kB)
[    0.000000]       .data : 0xc0590613 - 0xc07a2e48   (2122 kB)
[    0.000000]       .text : 0xc0100000 - 0xc0590613   (4673 kB)
[    0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[    0.000000] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[    0.000000] Hierarchical RCU implementation.
[    0.000000] NR_IRQS:2304 nr_irqs:424
[    0.000000] spurious 8259A interrupt: IRQ7.
[    0.000000] Console: colour VGA+ 80x25
[    0.000000] console [tty0] enabled
[    0.000000] hpet clockevent registered
[    0.000000] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[    0.000000] Fast TSC calibration using PIT
[    0.000000] Detected 2600.513 MHz processor.
[    0.004005] Calibrating delay loop (skipped), value calculated using timer frequency.. 5201.02 BogoMIPS (lpj=10402052)
[    0.004122] Security Framework initialized
[    0.004191] AppArmor: AppArmor initialized
[    0.008007] Mount-cache hash table entries: 512
[    0.008174] Initializing cgroup subsys ns
[    0.008227] Initializing cgroup subsys cpuacct
[    0.008281] Initializing cgroup subsys memory
[    0.008336] Initializing cgroup subsys devices
[    0.008388] Initializing cgroup subsys freezer
[    0.008440] Initializing cgroup subsys net_cls
[    0.008505] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[    0.008559] CPU: L2 Cache: 512K (64 bytes/line)
[    0.008610] CPU: Physical Processor ID: 0
[    0.008661] CPU: Processor Core ID: 0
[    0.008713] mce: CPU supports 5 MCE banks
[    0.008773] using C1E aware idle routine
[    0.008830] Performance Events: AMD PMU driver.
[    0.008925] ... version:                0
[    0.008976] ... bit width:              48
[    0.009027] ... generic registers:      4
[    0.009078] ... value mask:             0000ffffffffffff
[    0.009129] ... max period:             00007fffffffffff
[    0.009181] ... fixed-purpose events:   0
[    0.009232] ... event mask:             000000000000000f
[    0.009285] Checking 'hlt' instruction... OK.
[    0.025934] ACPI: Core revision 20090903
[    0.033234] ftrace: converting mcount calls to 0f 1f 44 00 00
[    0.033290] ftrace: allocating 21771 entries in 43 pages
[    0.036090] Enabling APIC mode:  Flat.  Using 1 I/O APICs
[    0.036670] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.079326] CPU0: AMD Athlon(tm) 64 X2 Dual Core Processor 5000+ stepping 02
[    0.080001] Booting processor 1 APIC 0x1 ip 0x6000
[    0.008000] Initializing CPU#1
[    0.008000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[    0.008000] CPU: L2 Cache: 512K (64 bytes/line)
[    0.008000] CPU: Physical Processor ID: 0
[    0.008000] CPU: Processor Core ID: 1
[    0.164118] CPU1: AMD Athlon(tm) 64 X2 Dual Core Processor 5000+ stepping 02
[    0.164521] Brought up 2 CPUs
[    0.164572] Total of 2 processors activated (10401.00 BogoMIPS).
[    0.164827] CPU0 attaching sched-domain:
[    0.164830]  domain 0: span 0-1 level MC
[    0.164832]   groups: 0 1
[    0.164837] CPU1 attaching sched-domain:
[    0.164839]  domain 0: span 0-1 level MC
[    0.164841]   groups: 1 0
[    0.164913] devtmpfs: initialized
[    0.164913] regulator: core version 0.5
[    0.164913] Time: 18:26:03  Date: 05/02/10
[    0.164913] NET: Registered protocol family 16
[    0.164913] EISA bus registered
[    0.164913] Trying to unpack rootfs image as initramfs...
[    0.165312] ACPI: bus type pci registered
[    0.165417] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
[    0.165472] PCI: Not using MMCONFIG.
[    0.166238] PCI: PCI BIOS revision 3.00 entry at 0xf0031, last bus=13
[    0.166291] PCI: Using configuration type 1 for base access
[    0.180118] bio: create slab <bio-0> at 0
[    0.180858] ACPI: EC: Look up EC in DSDT
[    0.184659] ACPI: Executed 1 blocks of module-level executable AML code
[    0.191060] ACPI: Interpreter enabled
[    0.191113] ACPI: (supports S0 S1 S4 S5)
[    0.191342] ACPI: Using IOAPIC for interrupt routing
[    0.191432] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
[    0.195851] PCI: MCFG area at e0000000 reserved in ACPI motherboard resources
[    0.195905] PCI: Using MMCONFIG for extended config space
[    0.203838] ACPI Warning: Incorrect checksum in table [OEMB] - AA, should be A1 (20090903/tbutils-314)
[    0.204106] ACPI: No dock devices found.
[    0.204260] ACPI: PCI Root Bridge [PCI0] (0000:00)
[    0.204544] pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.204598] pci 0000:00:02.0: PME# disabled
[    0.204679] pci 0000:00:03.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.204733] pci 0000:00:03.0: PME# disabled
[    0.204814] pci 0000:00:04.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.204867] pci 0000:00:04.0: PME# disabled
[    0.205133] pci 0000:00:09.1: reg 20 io port: [0x2d00-0x2d3f]
[    0.205139] pci 0000:00:09.1: reg 24 io port: [0x2e00-0x2e3f]
[    0.205162] pci 0000:00:09.1: PME# supported from D3hot D3cold
[    0.205218] pci 0000:00:09.1: PME# disabled
[    0.205297] pci 0000:00:0a.0: reg 10 32bit mmio: [0xf9dfb000-0xf9dfbfff]
[    0.205325] pci 0000:00:0a.0: supports D1 D2
[    0.205327] pci 0000:00:0a.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.205381] pci 0000:00:0a.0: PME# disabled
[    0.205456] pci 0000:00:0a.1: reg 10 32bit mmio: [0xf9dfac00-0xf9dfacff]
[    0.205486] pci 0000:00:0a.1: supports D1 D2
[    0.205488] pci 0000:00:0a.1: PME# supported from D0 D1 D2 D3hot D3cold
[    0.205542] pci 0000:00:0a.1: PME# disabled
[    0.205627] pci 0000:00:0c.0: reg 20 io port: [0xffa0-0xffaf]
[    0.205667] pci 0000:00:0d.0: reg 10 io port: [0xb800-0xb807]
[    0.205672] pci 0000:00:0d.0: reg 14 io port: [0xb480-0xb483]
[    0.205677] pci 0000:00:0d.0: reg 18 io port: [0xb400-0xb407]
[    0.205681] pci 0000:00:0d.0: reg 1c io port: [0xb080-0xb083]
[    0.205686] pci 0000:00:0d.0: reg 20 io port: [0xb000-0xb00f]
[    0.205691] pci 0000:00:0d.0: reg 24 32bit mmio: [0xf9df9000-0xf9df9fff]
[    0.205736] pci 0000:00:0d.1: reg 10 io port: [0xac00-0xac07]
[    0.205741] pci 0000:00:0d.1: reg 14 io port: [0xa880-0xa883]
[    0.205745] pci 0000:00:0d.1: reg 18 io port: [0xa800-0xa807]
[    0.205750] pci 0000:00:0d.1: reg 1c io port: [0xa480-0xa483]
[    0.205755] pci 0000:00:0d.1: reg 20 io port: [0xa400-0xa40f]
[    0.205760] pci 0000:00:0d.1: reg 24 32bit mmio: [0xf9df8000-0xf9df8fff]
[    0.205805] pci 0000:00:0d.2: reg 10 io port: [0xa080-0xa087]
[    0.205810] pci 0000:00:0d.2: reg 14 io port: [0xa000-0xa003]
[    0.205814] pci 0000:00:0d.2: reg 18 io port: [0x9c00-0x9c07]
[    0.205819] pci 0000:00:0d.2: reg 1c io port: [0x9880-0x9883]
[    0.205824] pci 0000:00:0d.2: reg 20 io port: [0x9800-0x980f]
[    0.205829] pci 0000:00:0d.2: reg 24 32bit mmio: [0xf9df7000-0xf9df7fff]
[    0.205928] pci 0000:00:10.0: reg 10 32bit mmio: [0xf9df6000-0xf9df6fff]
[    0.205933] pci 0000:00:10.0: reg 14 io port: [0x9480-0x9487]
[    0.205938] pci 0000:00:10.0: reg 18 32bit mmio: [0xf9dfa800-0xf9dfa8ff]
[    0.205943] pci 0000:00:10.0: reg 1c 32bit mmio: [0xf9dfa400-0xf9dfa40f]
[    0.205972] pci 0000:00:10.0: supports D1 D2
[    0.205974] pci 0000:00:10.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.206030] pci 0000:00:10.0: PME# disabled
[    0.206118] pci 0000:00:11.0: reg 10 32bit mmio: [0xf9df5000-0xf9df5fff]
[    0.206123] pci 0000:00:11.0: reg 14 io port: [0x9400-0x9407]
[    0.206128] pci 0000:00:11.0: reg 18 32bit mmio: [0xf9dfa000-0xf9dfa0ff]
[    0.206133] pci 0000:00:11.0: reg 1c 32bit mmio: [0xf9df4c00-0xf9df4c0f]
[    0.206161] pci 0000:00:11.0: supports D1 D2
[    0.206163] pci 0000:00:11.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.206219] pci 0000:00:11.0: PME# disabled
[    0.206321] pci 0000:00:12.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.206375] pci 0000:00:12.0: PME# disabled
[    0.206477] pci 0000:00:13.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.206531] pci 0000:00:13.0: PME# disabled
[    0.206632] pci 0000:00:14.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.206686] pci 0000:00:14.0: PME# disabled
[    0.206787] pci 0000:00:15.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.206841] pci 0000:00:15.0: PME# disabled
[    0.206942] pci 0000:00:16.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.206997] pci 0000:00:16.0: PME# disabled
[    0.207098] pci 0000:00:17.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.207152] pci 0000:00:17.0: PME# disabled
[    0.207362] pci 0000:03:00.0: reg 10 32bit mmio: [0xf9efc000-0xf9efffff]
[    0.207380] pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
[    0.207434] pci 0000:03:00.0: PME# disabled
[    0.207520] pci 0000:00:04.0: bridge io port: [0xc000-0xdfff]
[    0.207523] pci 0000:00:04.0: bridge 32bit mmio: [0xf9e00000-0xfeafffff]
[    0.207526] pci 0000:00:04.0: bridge 64bit mmio pref: [0xc0000000-0xdfffffff]
[    0.207561] pci 0000:04:00.0: PME# supported from D0 D3hot D3cold
[    0.207615] pci 0000:04:00.0: PME# disabled
[    0.207699] pci 0000:04:01.0: PME# supported from D0 D3hot D3cold
[    0.207753] pci 0000:04:01.0: PME# disabled
[    0.207825] pci 0000:03:00.0: bridge io port: [0xc000-0xdfff]
[    0.207829] pci 0000:03:00.0: bridge 32bit mmio: [0xf9f00000-0xfeafffff]
[    0.207834] pci 0000:03:00.0: bridge 64bit mmio pref: [0xc0000000-0xdfffffff]
[    0.207859] pci 0000:05:00.0: reg 10 32bit mmio: [0xfb000000-0xfbffffff]
[    0.207867] pci 0000:05:00.0: reg 14 64bit mmio pref: [0xc0000000-0xcfffffff]
[    0.207876] pci 0000:05:00.0: reg 1c 64bit mmio: [0xfa000000-0xfaffffff]
[    0.207881] pci 0000:05:00.0: reg 24 io port: [0xcc00-0xcc7f]
[    0.207887] pci 0000:05:00.0: reg 30 32bit mmio pref: [0xf9fe0000-0xf9ffffff]
[    0.207931] pci 0000:04:00.0: bridge io port: [0xc000-0xcfff]
[    0.207934] pci 0000:04:00.0: bridge 32bit mmio: [0xf9f00000-0xfbffffff]
[    0.207939] pci 0000:04:00.0: bridge 64bit mmio pref: [0xc0000000-0xcfffffff]
[    0.207965] pci 0000:06:00.0: reg 10 32bit mmio: [0xfd000000-0xfdffffff]
[    0.207974] pci 0000:06:00.0: reg 14 64bit mmio pref: [0xd0000000-0xdfffffff]
[    0.207982] pci 0000:06:00.0: reg 1c 64bit mmio: [0xfc000000-0xfcffffff]
[    0.207988] pci 0000:06:00.0: reg 24 io port: [0xdc00-0xdc7f]
[    0.208005] pci 0000:06:00.0: reg 30 32bit mmio pref: [0xfeae0000-0xfeafffff]
[    0.208051] pci 0000:04:01.0: bridge io port: [0xd000-0xdfff]
[    0.208055] pci 0000:04:01.0: bridge 32bit mmio: [0xfc000000-0xfeafffff]
[    0.208059] pci 0000:04:01.0: bridge 64bit mmio pref: [0xd0000000-0xdfffffff]
[    0.208099] pci 0000:07:04.0: reg 10 32bit mmio: [0xfebff800-0xfebfffff]
[    0.208105] pci 0000:07:04.0: reg 14 io port: [0xec00-0xec7f]
[    0.208138] pci 0000:07:04.0: supports D2
[    0.208140] pci 0000:07:04.0: PME# supported from D2 D3hot D3cold
[    0.208194] pci 0000:07:04.0: PME# disabled
[    0.208274] pci 0000:07:08.0: reg 10 io port: [0xe800-0xe8ff]
[    0.208310] pci 0000:07:08.0: supports D1 D2
[    0.208337] pci 0000:00:0e.0: transparent bridge
[    0.208390] pci 0000:00:0e.0: bridge io port: [0xe000-0xefff]
[    0.208394] pci 0000:00:0e.0: bridge 32bit mmio: [0xfeb00000-0xfebfffff]
[    0.208649] pci_bus 0000:00: on NUMA node 0
[    0.208653] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[    0.208869] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P8._PRT]
[    0.208916] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P9._PRT]
[    0.208963] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0PA._PRT]
[    0.209030] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
[    0.209116] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR10._PRT]
[    0.209163] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR11._PRT]
[    0.209209] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR12._PRT]
[    0.209255] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR13._PRT]
[    0.209301] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR14._PRT]
[    0.209346] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR15._PRT]
[    0.222164] ACPI: PCI Interrupt Link [LNKA] (IRQs 16 17 18 19) *5
[    0.222688] ACPI: PCI Interrupt Link [LNKB] (IRQs 16 17 18 19) *0, disabled.
[    0.223250] ACPI: PCI Interrupt Link [LNKC] (IRQs 16 17 18 19) *10
[    0.223770] ACPI: PCI Interrupt Link [LNKD] (IRQs 16 17 18 19) *0, disabled.
[    0.224319] ACPI: PCI Interrupt Link [LNEA] (IRQs 16 17 18 19) *11
[    0.224839] ACPI: PCI Interrupt Link [LNEB] (IRQs 16 17 18 19) *10
[    0.225363] ACPI: PCI Interrupt Link [LNEC] (IRQs 16 17 18 19) *0, disabled.
[    0.225925] ACPI: PCI Interrupt Link [LNED] (IRQs 16 17 18 19) *0, disabled.
[    0.226487] ACPI: PCI Interrupt Link [LUB0] (IRQs 20 21 22 23) *5
[    0.227007] ACPI: PCI Interrupt Link [LMAD] (IRQs 20 21 22 23) *10
[    0.227530] ACPI: PCI Interrupt Link [LUB2] (IRQs 20 21 22 23) *7
[    0.228098] ACPI: PCI Interrupt Link [LMAC] (IRQs 20 21 22 23) *10
[    0.228620] ACPI: PCI Interrupt Link [LAZA] (IRQs 20 21 22 23) *0, disabled.
[    0.229181] ACPI: PCI Interrupt Link [LSMB] (IRQs 20 21 22 23) *11
[    0.229702] ACPI: PCI Interrupt Link [LPMU] (IRQs 20 21 22 23) *0, disabled.
[    0.230264] ACPI: PCI Interrupt Link [LSA0] (IRQs 20 21 22 23) *10
[    0.230785] ACPI: PCI Interrupt Link [LSA1] (IRQs 20 21 22 23) *11
[    0.231339] ACPI: PCI Interrupt Link [LATA] (IRQs 20 21 22 23) *0, disabled.
[    0.231903] ACPI: PCI Interrupt Link [LSA2] (IRQs 20 21 22 23) *5
[    0.232332] vgaarb: device added: PCI:0000:06:00.0,decodes=io+mem,owns=io+mem,locks=none
[    0.232394] vgaarb: loaded
[    0.232547] SCSI subsystem initialized
[    0.232691] libata version 3.00 loaded.
[    0.232758] usbcore: registered new interface driver usbfs
[    0.232819] usbcore: registered new interface driver hub
[    0.232891] usbcore: registered new device driver usb
[    0.233062] ACPI: WMI: Mapper loaded
[    0.233113] PCI: Using ACPI for IRQ routing
[    0.233345] NetLabel: Initializing
[    0.233396] NetLabel:  domain hash size = 128
[    0.233447] NetLabel:  protocols = UNLABELED CIPSOv4
[    0.233509] NetLabel:  unlabeled traffic allowed by default
[    0.233592] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 31
[    0.233808] hpet0: 3 comparators, 32-bit 25.000000 MHz counter
[    0.236220] Switching to clocksource hpet
[    0.237654] AppArmor: AppArmor Filesystem Enabled
[    0.237728] pnp: PnP ACPI init
[    0.237795] ACPI: bus type pnp registered
[    0.242413] pnp: PnP ACPI: found 16 devices
[    0.242465] ACPI: ACPI bus type pnp unregistered
[    0.242518] PnPBIOS: Disabled by ACPI PNP
[    0.242582] system 00:08: ioport range 0x4d0-0x4d1 has been reserved
[    0.242636] system 00:08: ioport range 0x800-0x80f has been reserved
[    0.242690] system 00:08: ioport range 0x2000-0x207f has been reserved
[    0.242744] system 00:08: ioport range 0x2080-0x20ff has been reserved
[    0.242797] system 00:08: ioport range 0x2400-0x247f has been reserved
[    0.242851] system 00:08: ioport range 0x2480-0x24ff has been reserved
[    0.242905] system 00:08: ioport range 0x2800-0x287f has been reserved
[    0.242959] system 00:08: ioport range 0x2880-0x28ff has been reserved
[    0.243012] system 00:08: ioport range 0x2c00-0x2c7f has been reserved
[    0.243066] system 00:08: ioport range 0x2c80-0x2cff has been reserved
[    0.243121] system 00:08: iomem range 0xfee01000-0xfeefffff has been reserved
[    0.243176] system 00:08: iomem range 0xffb80000-0xffbfffff has been reserved
[    0.243233] system 00:0a: iomem range 0xfec00000-0xfec00fff could not be reserved
[    0.243294] system 00:0a: iomem range 0xfee00000-0xfee00fff has been reserved
[    0.243351] system 00:0d: ioport range 0xa00-0xa0f has been reserved
[    0.243405] system 00:0d: ioport range 0xa10-0xa1f has been reserved
[    0.243461] system 00:0e: iomem range 0xe0000000-0xefffffff has been reserved
[    0.243517] system 00:0f: iomem range 0x0-0x9ffff could not be reserved
[    0.243571] system 00:0f: iomem range 0xc0000-0xcffff could not be reserved
[    0.243625] system 00:0f: iomem range 0xe0000-0xfffff could not be reserved
[    0.243679] system 00:0f: iomem range 0x100000-0x7fffffff could not be reserved
[    0.243740] system 00:0f: iomem range 0xfec00000-0xffffffff could not be reserved
[    0.278530] pci 0000:00:02.0: PCI bridge, secondary bus 0000:01
[    0.278583] pci 0000:00:02.0:   IO window: disabled
[    0.278636] pci 0000:00:02.0:   MEM window: disabled
[    0.278688] pci 0000:00:02.0:   PREFETCH window: disabled
[    0.278742] pci 0000:00:03.0: PCI bridge, secondary bus 0000:02
[    0.278794] pci 0000:00:03.0:   IO window: disabled
[    0.278847] pci 0000:00:03.0:   MEM window: disabled
[    0.278899] pci 0000:00:03.0:   PREFETCH window: disabled
[    0.278953] pci 0000:04:00.0: PCI bridge, secondary bus 0000:05
[    0.279006] pci 0000:04:00.0:   IO window: 0xc000-0xcfff
[    0.279061] pci 0000:04:00.0:   MEM window: 0xf9f00000-0xfbffffff
[    0.279115] pci 0000:04:00.0:   PREFETCH window: 0x000000c0000000-0x000000cfffffff
[    0.279177] pci 0000:04:01.0: PCI bridge, secondary bus 0000:06
[    0.279231] pci 0000:04:01.0:   IO window: 0xd000-0xdfff
[    0.279285] pci 0000:04:01.0:   MEM window: 0xfc000000-0xfeafffff
[    0.279339] pci 0000:04:01.0:   PREFETCH window: 0x000000d0000000-0x000000dfffffff
[    0.279401] pci 0000:03:00.0: PCI bridge, secondary bus 0000:04
[    0.279454] pci 0000:03:00.0:   IO window: 0xc000-0xdfff
[    0.279508] pci 0000:03:00.0:   MEM window: 0xf9f00000-0xfeafffff
[    0.279562] pci 0000:03:00.0:   PREFETCH window: 0x000000c0000000-0x000000dfffffff
[    0.279624] pci 0000:00:04.0: PCI bridge, secondary bus 0000:03
[    0.279678] pci 0000:00:04.0:   IO window: 0xc000-0xdfff
[    0.279731] pci 0000:00:04.0:   MEM window: 0xf9e00000-0xfeafffff
[    0.279784] pci 0000:00:04.0:   PREFETCH window: 0x000000c0000000-0x000000dfffffff
[    0.279846] pci 0000:00:0e.0: PCI bridge, secondary bus 0000:07
[    0.279899] pci 0000:00:0e.0:   IO window: 0xe000-0xefff
[    0.279953] pci 0000:00:0e.0:   MEM window: 0xfeb00000-0xfebfffff
[    0.280024] pci 0000:00:0e.0:   PREFETCH window: disabled
[    0.280078] pci 0000:00:12.0: PCI bridge, secondary bus 0000:08
[    0.280131] pci 0000:00:12.0:   IO window: disabled
[    0.280184] pci 0000:00:12.0:   MEM window: disabled
[    0.280237] pci 0000:00:12.0:   PREFETCH window: disabled
[    0.280291] pci 0000:00:13.0: PCI bridge, secondary bus 0000:09
[    0.280343] pci 0000:00:13.0:   IO window: disabled
[    0.280396] pci 0000:00:13.0:   MEM window: disabled
[    0.280449] pci 0000:00:13.0:   PREFETCH window: disabled
[    0.280503] pci 0000:00:14.0: PCI bridge, secondary bus 0000:0a
[    0.280556] pci 0000:00:14.0:   IO window: disabled
[    0.280609] pci 0000:00:14.0:   MEM window: disabled
[    0.280661] pci 0000:00:14.0:   PREFETCH window: disabled
[    0.280716] pci 0000:00:15.0: PCI bridge, secondary bus 0000:0b
[    0.280768] pci 0000:00:15.0:   IO window: disabled
[    0.280821] pci 0000:00:15.0:   MEM window: disabled
[    0.280874] pci 0000:00:15.0:   PREFETCH window: disabled
[    0.280928] pci 0000:00:16.0: PCI bridge, secondary bus 0000:0c
[    0.280981] pci 0000:00:16.0:   IO window: disabled
[    0.281036] pci 0000:00:16.0:   MEM window: disabled
[    0.281088] pci 0000:00:16.0:   PREFETCH window: disabled
[    0.281143] pci 0000:00:17.0: PCI bridge, secondary bus 0000:0d
[    0.281195] pci 0000:00:17.0:   IO window: disabled
[    0.281248] pci 0000:00:17.0:   MEM window: disabled
[    0.281301] pci 0000:00:17.0:   PREFETCH window: disabled
[    0.281361] pci 0000:00:02.0: setting latency timer to 64
[    0.281366] pci 0000:00:03.0: setting latency timer to 64
[    0.281371] pci 0000:00:04.0: setting latency timer to 64
[    0.281377] pci 0000:03:00.0: setting latency timer to 64
[    0.281383] pci 0000:04:00.0: setting latency timer to 64
[    0.281389] pci 0000:04:01.0: setting latency timer to 64
[    0.281394] pci 0000:00:0e.0: setting latency timer to 64
[    0.281400] pci 0000:00:12.0: setting latency timer to 64
[    0.281406] pci 0000:00:13.0: setting latency timer to 64
[    0.281412] pci 0000:00:14.0: setting latency timer to 64
[    0.281418] pci 0000:00:15.0: setting latency timer to 64
[    0.281424] pci 0000:00:16.0: setting latency timer to 64
[    0.281430] pci 0000:00:17.0: setting latency timer to 64
[    0.281434] pci_bus 0000:00: resource 0 io:  [0x00-0xffff]
[    0.281436] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff]
[    0.281440] pci_bus 0000:03: resource 0 io:  [0xc000-0xdfff]
[    0.281442] pci_bus 0000:03: resource 1 mem: [0xf9e00000-0xfeafffff]
[    0.281445] pci_bus 0000:03: resource 2 pref mem [0xc0000000-0xdfffffff]
[    0.281447] pci_bus 0000:04: resource 0 io:  [0xc000-0xdfff]
[    0.281450] pci_bus 0000:04: resource 1 mem: [0xf9f00000-0xfeafffff]
[    0.281453] pci_bus 0000:04: resource 2 pref mem [0xc0000000-0xdfffffff]
[    0.281455] pci_bus 0000:05: resource 0 io:  [0xc000-0xcfff]
[    0.281458] pci_bus 0000:05: resource 1 mem: [0xf9f00000-0xfbffffff]
[    0.281461] pci_bus 0000:05: resource 2 pref mem [0xc0000000-0xcfffffff]
[    0.281463] pci_bus 0000:06: resource 0 io:  [0xd000-0xdfff]
[    0.281466] pci_bus 0000:06: resource 1 mem: [0xfc000000-0xfeafffff]
[    0.281469] pci_bus 0000:06: resource 2 pref mem [0xd0000000-0xdfffffff]
[    0.281471] pci_bus 0000:07: resource 0 io:  [0xe000-0xefff]
[    0.281474] pci_bus 0000:07: resource 1 mem: [0xfeb00000-0xfebfffff]
[    0.281476] pci_bus 0000:07: resource 3 io:  [0x00-0xffff]
[    0.281479] pci_bus 0000:07: resource 4 mem: [0x000000-0xffffffff]
[    0.281515] NET: Registered protocol family 2
[    0.281647] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.281996] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.283561] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[    0.283964] TCP: Hash tables configured (established 131072 bind 65536)
[    0.284050] TCP reno registered
[    0.284189] NET: Registered protocol family 1
[    0.284290] pci 0000:00:00.0: Found enabled HT MSI Mapping
[    0.284361] pci 0000:00:00.0: Found enabled HT MSI Mapping
[    0.284436] pci 0000:00:00.0: Found enabled HT MSI Mapping
[    0.300078] pci 0000:00:08.0: Found enabled HT MSI Mapping
[    0.300172] pci 0000:00:08.0: Found enabled HT MSI Mapping
[    0.300266] pci 0000:00:08.0: Found enabled HT MSI Mapping
[    0.300361] pci 0000:00:08.0: Found enabled HT MSI Mapping
[    0.300470] pci 0000:00:08.0: Found enabled HT MSI Mapping
[    0.300586] pci 0000:00:08.0: Found enabled HT MSI Mapping
[    0.300709] pci 0000:00:08.0: Found enabled HT MSI Mapping
[    0.300838] pci 0000:00:08.0: Found enabled HT MSI Mapping
[    0.300975] pci 0000:00:08.0: Found enabled HT MSI Mapping
[    0.301121] pci 0000:00:08.0: Found enabled HT MSI Mapping
[    0.301272] pci 0000:00:08.0: Found enabled HT MSI Mapping
[    0.301429] pci 0000:00:08.0: Found enabled HT MSI Mapping
[    0.301516] pci 0000:06:00.0: Boot video device
[    0.301702] cpufreq-nforce2: No nForce2 chipset.
[    0.301775] Scanning for low memory corruption every 60 seconds
[    0.301941] audit: initializing netlink socket (disabled)
[    0.302003] type=2000 audit(1272824763.300:1): initialized
[    0.309989] highmem bounce pool size: 64 pages
[    0.310045] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[    0.311268] VFS: Disk quotas dquot_6.5.2
[    0.311367] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    0.311873] fuse init (API version 7.13)
[    0.312018] msgmni has been set to 1681
[    0.312268] alg: No test for stdrng (krng)
[    0.312361] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[    0.312422] io scheduler noop registered
[    0.312473] io scheduler anticipatory registered
[    0.312525] io scheduler deadline registered
[    0.312607] io scheduler cfq registered (default)
[    0.312805]   alloc irq_desc for 24 on node -1
[    0.312807]   alloc kstat_irqs on node -1
[    0.312816] pcieport 0000:00:02.0: irq 24 for MSI/MSI-X
[    0.312821] pcieport 0000:00:02.0: setting latency timer to 64
[    0.312885]   alloc irq_desc for 25 on node -1
[    0.312887]   alloc kstat_irqs on node -1
[    0.312891] pcieport 0000:00:03.0: irq 25 for MSI/MSI-X
[    0.312895] pcieport 0000:00:03.0: setting latency timer to 64
[    0.312952]   alloc irq_desc for 26 on node -1
[    0.312954]   alloc kstat_irqs on node -1
[    0.312958] pcieport 0000:00:04.0: irq 26 for MSI/MSI-X
[    0.312962] pcieport 0000:00:04.0: setting latency timer to 64
[    0.313040]   alloc irq_desc for 27 on node -1
[    0.313042]   alloc kstat_irqs on node -1
[    0.313047] pcieport 0000:00:12.0: irq 27 for MSI/MSI-X
[    0.313052] pcieport 0000:00:12.0: setting latency timer to 64
[    0.313133]   alloc irq_desc for 28 on node -1
[    0.313135]   alloc kstat_irqs on node -1
[    0.313140] pcieport 0000:00:13.0: irq 28 for MSI/MSI-X
[    0.313145] pcieport 0000:00:13.0: setting latency timer to 64
[    0.313229]   alloc irq_desc for 29 on node -1
[    0.313231]   alloc kstat_irqs on node -1
[    0.313236] pcieport 0000:00:14.0: irq 29 for MSI/MSI-X
[    0.313241] pcieport 0000:00:14.0: setting latency timer to 64
[    0.313325]   alloc irq_desc for 30 on node -1
[    0.313327]   alloc kstat_irqs on node -1
[    0.313332] pcieport 0000:00:15.0: irq 30 for MSI/MSI-X
[    0.313338] pcieport 0000:00:15.0: setting latency timer to 64
[    0.313423]   alloc irq_desc for 31 on node -1
[    0.313430]   alloc kstat_irqs on node -1
[    0.313434] pcieport 0000:00:16.0: irq 31 for MSI/MSI-X
[    0.313439] pcieport 0000:00:16.0: setting latency timer to 64
[    0.313522]   alloc irq_desc for 32 on node -1
[    0.313524]   alloc kstat_irqs on node -1
[    0.313529] pcieport 0000:00:17.0: irq 32 for MSI/MSI-X
[    0.313533] pcieport 0000:00:17.0: setting latency timer to 64
[    0.313660] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    0.313732] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    0.313889] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[    0.313958] ACPI: Power Button [PWRB]
[    0.314049] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[    0.314109] ACPI: Power Button [PWRF]
[    0.314437] processor LNXCPU:00: registered as cooling_device0
[    0.314514] processor LNXCPU:01: registered as cooling_device1
[    0.319358] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    0.319514] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[    0.319818] 00:05: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[    0.320850] brd: module loaded
[    0.321293] loop: module loaded
[    0.321425] input: Macintosh mouse button emulation as /devices/virtual/input/input2
[    0.321665] pata_acpi 0000:00:0c.0: setting latency timer to 64
[    0.321961] ACPI: PCI Interrupt Link [LSA0] enabled at IRQ 23
[    0.322017]   alloc irq_desc for 23 on node -1
[    0.322019]   alloc kstat_irqs on node -1
[    0.322030] pata_acpi 0000:00:0d.0: PCI INT A -> Link[LSA0] -> GSI 23 (level, low) -> IRQ 23
[    0.322102] pata_acpi 0000:00:0d.0: setting latency timer to 64
[    0.322109] pata_acpi 0000:00:0d.0: PCI INT A disabled
[    0.322392] ACPI: PCI Interrupt Link [LSA1] enabled at IRQ 22
[    0.322445]   alloc irq_desc for 22 on node -1
[    0.322446]   alloc kstat_irqs on node -1
[    0.322454] pata_acpi 0000:00:0d.1: PCI INT B -> Link[LSA1] -> GSI 22 (level, low) -> IRQ 22
[    0.322525] pata_acpi 0000:00:0d.1: setting latency timer to 64
[    0.322532] pata_acpi 0000:00:0d.1: PCI INT B disabled
[    0.322813] ACPI: PCI Interrupt Link [LSA2] enabled at IRQ 21
[    0.322866]   alloc irq_desc for 21 on node -1
[    0.322867]   alloc kstat_irqs on node -1
[    0.322875] pata_acpi 0000:00:0d.2: PCI INT C -> Link[LSA2] -> GSI 21 (level, low) -> IRQ 21
[    0.322946] pata_acpi 0000:00:0d.2: setting latency timer to 64
[    0.322952] pata_acpi 0000:00:0d.2: PCI INT C disabled
[    0.323269] Fixed MDIO Bus: probed
[    0.323347] PPP generic driver version 2.4.2
[    0.323429] tun: Universal TUN/TAP device driver, 1.6
[    0.323481] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[    0.323608] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.323891] ACPI: PCI Interrupt Link [LUB2] enabled at IRQ 20
[    0.323944]   alloc irq_desc for 20 on node -1
[    0.323945]   alloc kstat_irqs on node -1
[    0.323952] ehci_hcd 0000:00:0a.1: PCI INT B -> Link[LUB2] -> GSI 20 (level, low) -> IRQ 20
[    0.324054] ehci_hcd 0000:00:0a.1: setting latency timer to 64
[    0.324057] ehci_hcd 0000:00:0a.1: EHCI Host Controller
[    0.324141] ehci_hcd 0000:00:0a.1: new USB bus registered, assigned bus number 1
[    0.324222] ehci_hcd 0000:00:0a.1: debug port 1
[    0.324280] ehci_hcd 0000:00:0a.1: cache line size of 64 is not supported
[    0.324302] ehci_hcd 0000:00:0a.1: irq 20, io mem 0xf9dfac00
[    0.324426] isapnp: Scanning for PnP cards...
[    0.357218] ehci_hcd 0000:00:0a.1: USB 2.0 started, EHCI 1.00
[    0.357420] usb usb1: configuration #1 chosen from 1 choice
[    0.357497] hub 1-0:1.0: USB hub found
[    0.357558] hub 1-0:1.0: 10 ports detected
[    0.357677] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    0.358027] ACPI: PCI Interrupt Link [LUB0] enabled at IRQ 23
[    0.358083] ohci_hcd 0000:00:0a.0: PCI INT A -> Link[LUB0] -> GSI 23 (level, low) -> IRQ 23
[    0.358161] ohci_hcd 0000:00:0a.0: setting latency timer to 64
[    0.358164] ohci_hcd 0000:00:0a.0: OHCI Host Controller
[    0.358249] ohci_hcd 0000:00:0a.0: new USB bus registered, assigned bus number 2
[    0.358342] ohci_hcd 0000:00:0a.0: irq 23, io mem 0xf9dfb000
[    0.415316] usb usb2: configuration #1 chosen from 1 choice
[    0.415396] hub 2-0:1.0: USB hub found
[    0.415457] hub 2-0:1.0: 10 ports detected
[    0.415577] uhci_hcd: USB Universal Host Controller Interface driver
[    0.415717] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
[    0.422305] serio: i8042 KBD port at 0x60,0x64 irq 1
[    0.422369] serio: i8042 AUX port at 0x60,0x64 irq 12
[    0.422525] mice: PS/2 mouse device common for all mice
[    0.422670] rtc_cmos 00:02: RTC can wake from S4
[    0.422755] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[    0.422843] rtc0: alarms up to one year, y3k, 114 bytes nvram, hpet irqs
[    0.423000] device-mapper: uevent: version 1.0.3
[    0.443854] Freeing initrd memory: 12199k freed
[    0.457296] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com
[    0.457422] device-mapper: multipath: version 1.1.0 loaded
[    0.457475] device-mapper: multipath round-robin: version 1.0.0 loaded
[    0.457642] EISA: Probing bus 0 at eisa.0
[    0.457700] Cannot allocate resource for EISA slot 2
[    0.457766] EISA: Detected 0 cards.
[    0.457881] cpuidle: using governor ladder
[    0.457932] cpuidle: using governor menu
[    0.458347] TCP cubic registered
[    0.458513] NET: Registered protocol family 10
[    0.458937] lo: Disabled Privacy Extensions
[    0.459236] NET: Registered protocol family 17
[    0.459316] powernow-k8: Found 1 AMD Athlon(tm) 64 X2 Dual Core Processor 5000+ processors (2 cpu cores) (version 2.20.00)
[    0.459388] [Firmware Bug]: powernow-k8: No compatible ACPI _PSS objects found.
[    0.459389] [Firmware Bug]: powernow-k8: Try again with latest BIOS.
[    0.459514] Using IPI No-Shortcut mode
[    0.459633] PM: Resume from disk failed.
[    0.459645] registered taskstats version 1
[    0.460199]   Magic number: 10:426:442
[    0.460355] rtc_cmos 00:02: setting system clock to 2010-05-02 18:26:03 UTC (1272824763)
[    0.460415] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    0.460467] EDD information not available.
[    0.677489] isapnp: No Plug & Play device found
[    0.677563] Freeing unused kernel memory: 656k freed
[    0.678058] Write protecting the kernel text: 4676k
[    0.678141] Write protecting the kernel read-only data: 1840k
[    0.708977] udev: starting version 151
[    0.760390] pata_amd 0000:00:0c.0: version 0.4.1
[    0.760441] pata_amd 0000:00:0c.0: setting latency timer to 64
[    0.784797] scsi0 : pata_amd
[    0.786873] scsi1 : pata_amd
[    0.788031] ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14
[    0.788085] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15
[    0.788307] sata_nv 0000:00:0d.0: version 3.5
[    0.788320] sata_nv 0000:00:0d.0: PCI INT A -> Link[LSA0] -> GSI 23 (level, low) -> IRQ 23
[    0.788382] sata_nv 0000:00:0d.0: Using SWNCQ mode
[    0.788499] sata_nv 0000:00:0d.0: setting latency timer to 64
[    0.793476] scsi2 : sata_nv
[    0.817121] scsi3 : sata_nv
[    0.817379] ata3: SATA max UDMA/133 cmd 0xb800 ctl 0xb480 bmdma 0xb000 irq 23
[    0.817434] ata4: SATA max UDMA/133 cmd 0xb400 ctl 0xb080 bmdma 0xb008 irq 23
[    0.817523] forcedeth: Reverse Engineered nForce ethernet driver. Version 0.64.
[    0.817888] ACPI: PCI Interrupt Link [LMAC] enabled at IRQ 22
[    0.817944] forcedeth 0000:00:10.0: PCI INT A -> Link[LMAC] -> GSI 22 (level, low) -> IRQ 22
[    0.818007] forcedeth 0000:00:10.0: setting latency timer to 64
[    0.818058] nv_probe: set workaround bit for reversed mac addr
[    0.837061] usb 1-3: new high speed USB device using ehci_hcd and address 4
[    0.843410] Floppy drive(s): fd0 is 1.44M
[    0.859883] FDC 0 is a post-1991 82077
[    0.968856] usb 1-3: configuration #1 chosen from 1 choice
[    0.969029] hub 1-3:1.0: USB hub found
[    0.969133] hub 1-3:1.0: 4 ports detected
[    1.128342] ata1.00: ATAPI: PLEXTOR DVDR   PX-820A, 1.00, max UDMA/66
[    1.128422] ata1.01: ATAPI: LITE-ON LTR-48125W, VS04, max UDMA/33
[    1.128492] ata1: nv_mode_filter: 0x1f39f&0x1f39f->0x1f39f, BIOS=0x1f000 (0xc5c00000) ACPI=0x1f01f (30:60:0x15)
[    1.128497] ata1: nv_mode_filter: 0x739f&0x739f->0x739f, BIOS=0x7000 (0xc5c00000) ACPI=0x701f (30:60:0x15)
[    1.144331] ata1.00: configured for UDMA/66
[    1.160257] ata1.01: configured for UDMA/33
[    1.170402] scsi 0:0:0:0: CD-ROM            PLEXTOR  DVDR   PX-820A   1.00 PQ: 0 ANSI: 5
[    1.175247] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[    1.175312] Uniform CD-ROM driver Revision: 3.20
[    1.175502] sr 0:0:0:0: Attached scsi CD-ROM sr0
[    1.175564] sr 0:0:0:0: Attached scsi generic sg0 type 5
[    1.180356] scsi 0:0:1:0: CD-ROM            LITE-ON  LTR-48125W       VS04 PQ: 0 ANSI: 5
[    1.229887] sr1: scsi3-mmc drive: 238x/48x writer cd/rw xa/form2 cdda tray
[    1.230067] sr 0:0:1:0: Attached scsi CD-ROM sr1
[    1.230129] sr 0:0:1:0: Attached scsi generic sg1 type 5
[    1.230252] ata2: port disabled. ignoring.
[    1.300058] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    1.309238] ata3.00: ATA-6: WDC WD360GD-00FLC0, 33.08F33, max UDMA/133
[    1.309292] ata3.00: 72303840 sectors, multi 16: LBA48 
[    1.325279] ata3.00: configured for UDMA/133
[    1.325409] scsi 2:0:0:0: Direct-Access     ATA      WDC WD360GD-00FL 33.0 PQ: 0 ANSI: 5
[    1.325577] sd 2:0:0:0: [sda] 72303840 512-byte logical blocks: (37.0 GB/34.4 GiB)
[    1.326514] sd 2:0:0:0: [sda] Write Protect is off
[    1.326567] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    1.326587] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.326763]  sda:
[    1.326944] sd 2:0:0:0: Attached scsi generic sg2 type 0
[    1.328024] usb 2-1: new low speed USB device using ohci_hcd and address 2
[    1.333168]  sda1 sda2
[    1.333573] sd 2:0:0:0: [sda] Attached SCSI disk
[    1.337704] forcedeth 0000:00:10.0: ifname eth0, PHY OUI 0x1c1 @ 1, addr 00:16:17:9a:85:9f
[    1.337767] forcedeth 0000:00:10.0: highdma csum vlan pwrctl mgmt gbit lnktim msi desc-v3
[    1.337862] sata_nv 0000:00:0d.1: PCI INT B -> Link[LSA1] -> GSI 22 (level, low) -> IRQ 22
[    1.337924] sata_nv 0000:00:0d.1: Using SWNCQ mode
[    1.338028] sata_nv 0000:00:0d.1: setting latency timer to 64
[    1.338181] scsi4 : sata_nv
[    1.338300] scsi5 : sata_nv
[    1.338503] ata5: SATA max UDMA/133 cmd 0xac00 ctl 0xa880 bmdma 0xa400 irq 22
[    1.338557] ata6: SATA max UDMA/133 cmd 0xa800 ctl 0xa480 bmdma 0xa408 irq 22
[    1.338918] ACPI: PCI Interrupt Link [LMAD] enabled at IRQ 21
[    1.338974] forcedeth 0000:00:11.0: PCI INT A -> Link[LMAD] -> GSI 21 (level, low) -> IRQ 21
[    1.339037] forcedeth 0000:00:11.0: setting latency timer to 64
[    1.339084] nv_probe: set workaround bit for reversed mac addr
[    1.542339] usb 2-1: configuration #1 chosen from 1 choice
[    1.792046] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    1.801203] ata4.00: ATA-7: Maxtor 6V320F0, VA111900, max UDMA/133
[    1.801257] ata4.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 31/32)
[    1.817230] ata4.00: configured for UDMA/133
[    1.817389] scsi 3:0:0:0: Direct-Access     ATA      Maxtor 6V320F0   VA11 PQ: 0 ANSI: 5
[    1.817459] ata4.00: Disabling SWNCQ mode (depth 1)
[    1.817661] sd 3:0:0:0: Attached scsi generic sg3 type 0
[    1.817772] sd 3:0:0:0: [sdb] 625142448 512-byte logical blocks: (320 GB/298 GiB)
[    1.817869] sd 3:0:0:0: [sdb] Write Protect is off
[    1.817925] sd 3:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[    1.818138] sd 3:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.818337]  sdb: sdb1
[    1.837930] sd 3:0:0:0: [sdb] Attached SCSI disk
[    1.852039] usb 2-2: new full speed USB device using ohci_hcd and address 3
[    1.861771] forcedeth 0000:00:11.0: ifname eth1, PHY OUI 0x1c1 @ 0, addr 00:16:17:98:3c:62
[    1.861833] forcedeth 0000:00:11.0: highdma csum vlan pwrctl mgmt gbit lnktim msi desc-v3
[    1.861929] sata_nv 0000:00:0d.2: PCI INT C -> Link[LSA2] -> GSI 21 (level, low) -> IRQ 21
[    1.861991] sata_nv 0000:00:0d.2: Using SWNCQ mode
[    1.862098] sata_nv 0000:00:0d.2: setting latency timer to 64
[    1.862252] scsi6 : sata_nv
[    1.862368] scsi7 : sata_nv
[    1.862573] ata7: SATA max UDMA/133 cmd 0xa080 ctl 0xa000 bmdma 0x9800 irq 21
[    1.862628] ata8: SATA max UDMA/133 cmd 0x9c00 ctl 0x9880 bmdma 0x9808 irq 21
[    1.865050] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    1.872383] ata5.00: ATA-6: ST3120026AS, 3.05, max UDMA/133
[    1.872436] ata5.00: 234441648 sectors, multi 16: LBA48 
[    1.888462] ata5.00: configured for UDMA/133
[    1.888610] scsi 4:0:0:0: Direct-Access     ATA      ST3120026AS      3.05 PQ: 0 ANSI: 5
[    1.888854] sd 4:0:0:0: Attached scsi generic sg4 type 0
[    1.888923] sd 4:0:0:0: [sdc] 234441648 512-byte logical blocks: (120 GB/111 GiB)
[    1.889099] sd 4:0:0:0: [sdc] Write Protect is off
[    1.889151] sd 4:0:0:0: [sdc] Mode Sense: 00 3a 00 00
[    1.889169] sd 4:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.889361]  sdc: sdc1
[    1.900829] sd 4:0:0:0: [sdc] Attached SCSI disk
[    2.084335] usb 2-2: configuration #1 chosen from 1 choice
[    2.182454] ata7: SATA link down (SStatus 0 SControl 300)
[    2.360058] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    2.384350] ata6.00: ATA-7: HDT722525DLA380, V44OA80A, max UDMA/133
[    2.384404] ata6.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 31/32)
[    2.388034] usb 2-4: new low speed USB device using ohci_hcd and address 4
[    2.400352] ata6.00: configured for UDMA/133
[    2.400510] scsi 5:0:0:0: Direct-Access     ATA      HDT722525DLA380  V44O PQ: 0 ANSI: 5
[    2.400706] sd 5:0:0:0: [sdd] 488397168 512-byte logical blocks: (250 GB/232 GiB)
[    2.400800] sd 5:0:0:0: [sdd] Write Protect is off
[    2.400852] sd 5:0:0:0: [sdd] Mode Sense: 00 3a 00 00
[    2.400871] sd 5:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    2.401066] sd 5:0:0:0: Attached scsi generic sg5 type 0
[    2.401253]  sdd: sdd1
[    2.420309] sd 5:0:0:0: [sdd] Attached SCSI disk
[    2.602339] usb 2-4: configuration #1 chosen from 1 choice
[    2.610226] usbcore: registered new interface driver hiddev
[    2.616525] input: Dell Dell USB Keyboard as /devices/pci0000:00/0000:00:0a.0/usb2/2-1/2-1:1.0/input/input3
[    2.616681] generic-usb 0003:413C:2003.0001: input,hidraw0: USB HID v1.10 Keyboard [Dell Dell USB Keyboard] on usb-0000:00:0a.0-1/input0
[    2.624422] input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:0a.0/usb2/2-4/2-4:1.0/input/input4
[    2.624561] generic-usb 0003:046D:C00C.0002: input,hidraw1: USB HID v1.10 Mouse [Logitech USB Optical Mouse] on usb-0000:00:0a.0-4/input0
[    2.624645] usbcore: registered new interface driver usbhid
[    2.624702] usbhid: v2.6:USB HID core driver
[    2.868053] ata8: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    2.876350] ata8.00: ATA-7: HDT722525DLA380, V44OA80A, max UDMA/133
[    2.876406] ata8.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 31/32)
[    2.892349] ata8.00: configured for UDMA/133
[    2.892501] scsi 7:0:0:0: Direct-Access     ATA      HDT722525DLA380  V44O PQ: 0 ANSI: 5
[    2.892696] sd 7:0:0:0: [sde] 488397168 512-byte logical blocks: (250 GB/232 GiB)
[    2.892791] sd 7:0:0:0: [sde] Write Protect is off
[    2.892846] sd 7:0:0:0: [sde] Mode Sense: 00 3a 00 00
[    2.892866] sd 7:0:0:0: [sde] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    2.893059] sd 7:0:0:0: Attached scsi generic sg6 type 0
[    2.893232]  sde: sde1 < sde5 > sde2 sde3
[    2.922189] sd 7:0:0:0: [sde] Attached SCSI disk
[    2.923680] vga16fb: initializing
[    2.923684] vga16fb: mapped to 0xc00a0000
[    2.923804] fb0: VGA16 VGA frame buffer device
[    2.927630] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 19
[    2.927693]   alloc irq_desc for 19 on node -1
[    2.927695]   alloc kstat_irqs on node -1
[    2.927707] ohci1394 0000:07:04.0: PCI INT A -> Link[LNKA] -> GSI 19 (level, low) -> IRQ 19
[    2.984109] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[19]  MMIO=[febff800-febfffff]  Max Packet=[2048]  IR/IT contexts=[4/8]
[    3.088844] Console: switching to colour frame buffer device 80x30
[    3.404905] kjournald starting.  Commit interval 5 seconds
[    3.404917] EXT3-fs: mounted filesystem with ordered data mode.
[    4.256270] ieee1394: Host added: ID:BUS[0-00:1023]  GUID[0010dc000108cbd5]
[   24.512411] udev: starting version 151
[   24.515263] Adding 522104k swap on /dev/sde3.  Priority:-1 extents:1 across:522104k 
[   24.550536] lp: driver loaded but no devices found
[   24.562985] i2c i2c-0: nForce2 SMBus adapter at 0x2d00
[   24.563004] i2c i2c-1: nForce2 SMBus adapter at 0x2e00
[   24.638552] w83627ehf: Found W83627EHG chip at 0xa10
[   24.644364] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[   24.658820] k8temp 0000:00:18.3: Temperature readouts might be wrong - check erratum #141
[   24.753051] EXT3 FS on sde5, internal journal
[   24.806067] Linux agpgart interface v0.103
[   24.883702] type=1505 audit(1272817587.919:2):  operation="profile_load" pid=777 name="/sbin/dhclient3"
[   24.883927] type=1505 audit(1272817587.919:3):  operation="profile_load" pid=777 name="/usr/lib/NetworkManager/nm-dhcp-client.action"
[   24.884056] type=1505 audit(1272817587.923:4):  operation="profile_load" pid=777 name="/usr/lib/connman/scripts/dhclient-script"
[   24.886087] nvidia: module license 'NVIDIA' taints kernel.
[   24.886092] Disabling lock debugging due to kernel taint
[   25.843320] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 18
[   25.843326]   alloc irq_desc for 18 on node -1
[   25.843328]   alloc kstat_irqs on node -1
[   25.843340] C-Media PCI 0000:07:08.0: PCI INT A -> Link[LNKC] -> GSI 18 (level, low) -> IRQ 18
[   25.871342] usblp0: USB Bidirectional printer dev 3 if 0 alt 0 proto 2 vid 0x03F0 pid 0x0904
[   25.871365] usbcore: registered new interface driver usblp
[   25.994980] ACPI: PCI Interrupt Link [LNEA] enabled at IRQ 17
[   25.994987]   alloc irq_desc for 17 on node -1
[   25.994989]   alloc kstat_irqs on node -1
[   25.995001] nvidia 0000:05:00.0: PCI INT A -> Link[LNEA] -> GSI 17 (level, low) -> IRQ 17
[   25.995010] nvidia 0000:05:00.0: setting latency timer to 64
[   25.995936] ACPI: PCI Interrupt Link [LNEB] enabled at IRQ 16
[   25.995941]   alloc irq_desc for 16 on node -1
[   25.995943]   alloc kstat_irqs on node -1
[   25.995954] nvidia 0000:06:00.0: PCI INT A -> Link[LNEB] -> GSI 16 (level, low) -> IRQ 16
[   25.995962] nvidia 0000:06:00.0: setting latency timer to 64
[   25.995966] vgaarb: device changed decodes: PCI:0000:06:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
[   25.996701] NVRM: loading NVIDIA UNIX x86 Kernel Module  195.36.15  Thu Mar 11 21:41:46 PST 2010
[   27.073530] type=1505 audit(1272817590.112:5):  operation="profile_load" pid=1031 name="/usr/share/gdm/guest-session/Xsession"
[   27.075049] type=1505 audit(1272817590.112:6):  operation="profile_replace" pid=1032 name="/sbin/dhclient3"
[   27.075287] type=1505 audit(1272817590.112:7):  operation="profile_replace" pid=1032 name="/usr/lib/NetworkManager/nm-dhcp-client.action"
[   27.075420] type=1505 audit(1272817590.112:8):  operation="profile_replace" pid=1032 name="/usr/lib/connman/scripts/dhclient-script"
[   27.078910] type=1505 audit(1272817590.116:9):  operation="profile_load" pid=1033 name="/usr/bin/evince"
[   27.081917] type=1505 audit(1272817590.120:10):  operation="profile_load" pid=1033 name="/usr/bin/evince-previewer"
[   27.083807] type=1505 audit(1272817590.120:11):  operation="profile_load" pid=1033 name="/usr/bin/evince-thumbnailer"
[   27.260665]   alloc irq_desc for 33 on node -1
[   27.260669]   alloc kstat_irqs on node -1
[   27.260681] forcedeth 0000:00:10.0: irq 33 for MSI/MSI-X
[   27.264396]   alloc irq_desc for 34 on node -1
[   27.264399]   alloc kstat_irqs on node -1
[   27.264409] forcedeth 0000:00:11.0: irq 34 for MSI/MSI-X
[   27.264607] eth1: no link during initialization.
[   27.265069] ADDRCONF(NETDEV_UP): eth1: link is not ready
[   27.270260] apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
[   27.270264] apm: disabled - APM is not SMP safe.

d'apres mon graphique de bootchar :
65688_dieu_lucid_20100430_2.png
Les 20 secondes de perdues correspondent à un processus ureadahead. A quoi cela correspond-t-il ?

Dernière modification par tmeg57 (Le 02/05/2010, à 18:42)


Fixe 1 : Ubuntu Lucid Lynx 10.04 32 Bits en Machine virtuelle VMWare - Intel Core i7 860 - 8 Go de Ram - ATI Radeon Saphire 5850 - Cate Mere Gigabyte P55A-UD4
Fixe 2 : Ubuntu Lucid Lynx 10.04 32 Bits - AMD X2 64 5000+ - 2 Go de RAM - Geforce 7950 GTX2 - CM K9 Diamond
Portable : Debian Leny 5.04 32 Bits - ThinkPad T41 2373 - Pentium M 1.4 GHz - 512 Mo de Ram - ATI Mobility Radeon 7500

Hors ligne

#25 Le 02/05/2010, à 20:20

Tripack

Re : Lucid : Démarrage encore plus lent qu'avant ?

Donc si j'ai pige 19 secondes.


[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Linux version 2.6.32-21-generic (buildd@rothera) (gcc version 4.4.3 (Ubuntu 4.4.3-4ubuntu5) ) #32-Ubuntu SMP Fri Apr 16 08:10:02 UTC 2010 (Ubuntu 2.6.32-21.32-generic 2.6.32.11+drm33.2)
[    0.000000] KERNEL supported cpus:
[    0.000000]   Intel GenuineIntel
[    0.000000]   AMD AuthenticAMD
[    0.000000]   NSC Geode by NSC
[    0.000000]   Cyrix CyrixInstead
[    0.000000]   Centaur CentaurHauls
[    0.000000]   Transmeta GenuineTMx86
[    0.000000]   Transmeta TransmetaCPU
[    0.000000]   UMC UMC UMC UMC
[    0.000000] BIOS-provided physical RAM map:
[    0.000000]  BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[    0.000000]  BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[    0.000000]  BIOS-e820: 00000000000d0000 - 00000000000d8000 (reserved)
[    0.000000]  BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[    0.000000]  BIOS-e820: 0000000000100000 - 000000004fff0000 (usable)
[    0.000000]  BIOS-e820: 000000004fff0000 - 000000004fff8000 (ACPI data)
[    0.000000]  BIOS-e820: 000000004fff8000 - 0000000050000000 (ACPI NVS)
[    0.000000]  BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
[    0.000000]  BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[    0.000000]  BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
[    0.000000] DMI 2.3 present.
[    0.000000] AMI BIOS detected: BIOS may corrupt low RAM, working around it.
[    0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[    0.000000] last_pfn = 0x4fff0 max_arch_pfn = 0x100000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-C7FFF write-protect
[    0.000000]   C8000-EFFFF uncachable
[    0.000000]   F0000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 000000000 mask FC0000000 write-back
[    0.000000]   1 base 040000000 mask FF0000000 write-back
[    0.000000]   2 disabled
[    0.000000]   3 disabled
[    0.000000]   4 disabled
[    0.000000]   5 base 0E0000000 mask FFC000000 write-combining
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[    0.000000] Scanning 0 areas for low memory corruption
[    0.000000] modified physical RAM map:
[    0.000000]  modified: 0000000000000000 - 0000000000010000 (reserved)
[    0.000000]  modified: 0000000000010000 - 000000000009fc00 (usable)
[    0.000000]  modified: 000000000009fc00 - 00000000000a0000 (reserved)
[    0.000000]  modified: 00000000000d0000 - 00000000000d8000 (reserved)
[    0.000000]  modified: 00000000000f0000 - 0000000000100000 (reserved)
[    0.000000]  modified: 0000000000100000 - 000000004fff0000 (usable)
[    0.000000]  modified: 000000004fff0000 - 000000004fff8000 (ACPI data)
[    0.000000]  modified: 000000004fff8000 - 0000000050000000 (ACPI NVS)
[    0.000000]  modified: 00000000fec00000 - 00000000fec01000 (reserved)
[    0.000000]  modified: 00000000fee00000 - 00000000fee01000 (reserved)
[    0.000000]  modified: 00000000fff80000 - 0000000100000000 (reserved)
[    0.000000] initial memory mapped : 0 - 00c00000
[    0.000000] init_memory_mapping: 0000000000000000-00000000377fe000
[    0.000000] Using x86 segment limits to approximate NX protection
[    0.000000]  0000000000 - 0000400000 page 4k
[    0.000000]  0000400000 - 0037400000 page 2M
[    0.000000]  0037400000 - 00377fe000 page 4k
[    0.000000] kernel direct mapping tables up to 377fe000 @ 10000-15000
[    0.000000] RAMDISK: 37858000 - 37fefdca
[    0.000000] Allocated new RAMDISK: 008de000 - 01075dca
[    0.000000] Move RAMDISK from 0000000037858000 - 0000000037fefdc9 to 008de000 - 01075dc9
[    0.000000] ACPI: RSDP 000fa8b0 00014 (v00 AMI   )
[    0.000000] ACPI: RSDT 4fff0000 0002C (v01 AMIINT VIA_K7   00000010 MSFT 00000097)
[    0.000000] ACPI: FACP 4fff0030 00081 (v01 AMIINT VIA_K7   00000011 MSFT 00000097)
[    0.000000] ACPI: DSDT 4fff0120 03502 (v01    VIA    K7VT4 00001000 INTL 02002024)
[    0.000000] ACPI: FACS 4fff8000 00040
[    0.000000] ACPI: APIC 4fff00c0 00054 (v01 AMIINT VIA_K7   00000009 MSFT 00000097)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] 391MB HIGHMEM available.
[    0.000000] 887MB LOWMEM available.
[    0.000000]   mapped low ram: 0 - 377fe000
[    0.000000]   low ram: 0 - 377fe000
[    0.000000]   node 0 low ram: 00000000 - 377fe000
[    0.000000]   node 0 bootmap 00011000 - 00017f00
[    0.000000] (9 early reservations) ==> bootmem [0000000000 - 00377fe000]
[    0.000000]   #0 [0000000000 - 0000001000]   BIOS data page ==> [0000000000 - 0000001000]
[    0.000000]   #1 [0000001000 - 0000002000]    EX TRAMPOLINE ==> [0000001000 - 0000002000]
[    0.000000]   #2 [0000006000 - 0000007000]       TRAMPOLINE ==> [0000006000 - 0000007000]
[    0.000000]   #3 [0000100000 - 00008d9e98]    TEXT DATA BSS ==> [0000100000 - 00008d9e98]
[    0.000000]   #4 [000009fc00 - 0000100000]    BIOS reserved ==> [000009fc00 - 0000100000]
[    0.000000]   #5 [00008da000 - 00008dd095]              BRK ==> [00008da000 - 00008dd095]
[    0.000000]   #6 [0000010000 - 0000011000]          PGTABLE ==> [0000010000 - 0000011000]
[    0.000000]   #7 [00008de000 - 0001075dca]      NEW RAMDISK ==> [00008de000 - 0001075dca]
[    0.000000]   #8 [0000011000 - 0000018000]          BOOTMAP ==> [0000011000 - 0000018000]
[    0.000000] Zone PFN ranges:
[    0.000000]   DMA      0x00000010 -> 0x00001000
[    0.000000]   Normal   0x00001000 -> 0x000377fe
[    0.000000]   HighMem  0x000377fe -> 0x0004fff0
[    0.000000] Movable zone start PFN for each node
[    0.000000] early_node_map[2] active PFN ranges
[    0.000000]     0: 0x00000010 -> 0x0000009f
[    0.000000]     0: 0x00000100 -> 0x0004fff0
[    0.000000] On node 0 totalpages: 327551
[    0.000000] free_area_init_node: node 0, pgdat c0798720, node_mem_map c1077200
[    0.000000]   DMA zone: 32 pages used for memmap
[    0.000000]   DMA zone: 0 pages reserved
[    0.000000]   DMA zone: 3951 pages, LIFO batch:0
[    0.000000]   Normal zone: 1744 pages used for memmap
[    0.000000]   Normal zone: 221486 pages, LIFO batch:31
[    0.000000]   HighMem zone: 784 pages used for memmap
[    0.000000]   HighMem zone: 99554 pages, LIFO batch:31
[    0.000000] Using APIC driver default
[    0.000000] ACPI: PM-Timer IO Port: 0x808
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[    0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 2, version 3, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] SMP: Allowing 1 CPUs, 0 hotplug CPUs
[    0.000000] nr_irqs_gsi: 24
[    0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[    0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000d0000
[    0.000000] PM: Registered nosave memory: 00000000000d0000 - 00000000000d8000
[    0.000000] PM: Registered nosave memory: 00000000000d8000 - 00000000000f0000
[    0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
[    0.000000] Allocating PCI resources starting at 50000000 (gap: 50000000:aec00000)
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:1 nr_node_ids:1
[    0.000000] PERCPU: Embedded 14 pages/cpu @c1c00000 s36024 r0 d21320 u4194304
[    0.000000] pcpu-alloc: s36024 r0 d21320 u4194304 alloc=1*4194304
[    0.000000] pcpu-alloc: [0] 0 
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 324991
[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-21-generic root=UUID=d5661f4d-7d13-4651-aa40-efdbd4057a3c ro quiet splash
[    0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] Enabling fast FPU save and restore... done.
[    0.000000] Enabling unmasked SIMD FPU exception support... done.
[    0.000000] Initializing CPU#0
[    0.000000] allocated 6552960 bytes of page_cgroup
[    0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[    0.000000] Initializing HighMem for node 0 (000377fe:0004fff0)
[    0.000000] Memory: 1275820k/1310656k available (4673k kernel code, 33368k reserved, 2122k data, 656k init, 401352k highmem)
[    0.000000] virtual kernel memory layout:
[    0.000000]     fixmap  : 0xfff1d000 - 0xfffff000   ( 904 kB)
[    0.000000]     pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
[    0.000000]     vmalloc : 0xf7ffe000 - 0xff7fe000   ( 120 MB)
[    0.000000]     lowmem  : 0xc0000000 - 0xf77fe000   ( 887 MB)
[    0.000000]       .init : 0xc07a3000 - 0xc0847000   ( 656 kB)
[    0.000000]       .data : 0xc0590613 - 0xc07a2e48   (2122 kB)
[    0.000000]       .text : 0xc0100000 - 0xc0590613   (4673 kB)
[    0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[    0.000000] SLUB: Genslabs=13, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[    0.000000] Hierarchical RCU implementation.
[    0.000000] NR_IRQS:2304 nr_irqs:256
[    0.000000] Console: colour VGA+ 80x25
[    0.000000] console [tty0] enabled
[    0.000000] Fast TSC calibration using PIT
[    0.000000] Detected 2015.384 MHz processor.
[    0.004009] Calibrating delay loop (skipped), value calculated using timer frequency.. 4030.76 BogoMIPS (lpj=8061536)
[    0.004042] Security Framework initialized
[    0.004098] AppArmor: AppArmor initialized
[    0.004110] Mount-cache hash table entries: 512
[    0.004342] Initializing cgroup subsys ns
[    0.004349] Initializing cgroup subsys cpuacct
[    0.004355] Initializing cgroup subsys memory
[    0.004370] Initializing cgroup subsys devices
[    0.004374] Initializing cgroup subsys freezer
[    0.004378] Initializing cgroup subsys net_cls
[    0.004410] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[    0.004414] CPU: L2 Cache: 512K (64 bytes/line)
[    0.004421] mce: CPU supports 4 MCE banks
[    0.004456] Performance Events: AMD PMU driver.
[    0.004466] ... version:                0
[    0.004468] ... bit width:              48
[    0.004470] ... generic registers:      4
[    0.004473] ... value mask:             0000ffffffffffff
[    0.004475] ... max period:             00007fffffffffff
[    0.004478] ... fixed-purpose events:   0
[    0.004480] ... event mask:             000000000000000f
[    0.004487] Checking 'hlt' instruction... OK.
[    0.020782] SMP alternatives: switching to UP code
[    0.027787] Freeing SMP alternatives: 19k freed
[    0.027832] ACPI: Core revision 20090903
[    0.035928] ftrace: converting mcount calls to 0f 1f 44 00 00
[    0.035941] ftrace: allocating 21771 entries in 43 pages
[    0.040207] Enabling APIC mode:  Flat.  Using 1 I/O APICs
[    0.045081] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.084768] CPU0: AMD Sempron(tm) 3000+ stepping 00
[    0.088001] Brought up 1 CPUs
[    0.088001] Total of 1 processors activated (4030.76 BogoMIPS).
[    0.088001] CPU0 attaching NULL sched-domain.
[    0.088001] devtmpfs: initialized
[    0.088001] regulator: core version 0.5
[    0.088001] Time: 14:43:44  Date: 05/02/10
[    0.088001] NET: Registered protocol family 16
[    0.088001] EISA bus registered
[    0.088001] ACPI: bus type pci registered
[    0.089056] PCI: PCI BIOS revision 2.10 entry at 0xfda71, last bus=1
[    0.089059] PCI: Using configuration type 1 for base access
[    0.090117] bio: create slab <bio-0> at 0
[    0.090739] ACPI: EC: Look up EC in DSDT
[    0.096534] ACPI: Interpreter enabled
[    0.096543] ACPI: (supports S0 S1 S3 S4 S5)
[    0.096570] ACPI: Using IOAPIC for interrupt routing
[    0.101295] ACPI: Power Resource [URP1] (off)
[    0.101329] ACPI: Power Resource [URP2] (off)
[    0.101361] ACPI: Power Resource [FDDP] (off)
[    0.101392] ACPI: Power Resource [LPTP] (off)
[    0.101541] ACPI: No dock devices found.
[    0.101697] ACPI: PCI Root Bridge [PCI0] (0000:00)
[    0.101756] pci 0000:00:00.0: reg 10 32bit mmio pref: [0xe0000000-0xe3ffffff]
[    0.101845] pci 0000:00:01.0: supports D1
[    0.101889] pci 0000:00:0f.0: reg 10 io port: [0xec00-0xec07]
[    0.101897] pci 0000:00:0f.0: reg 14 io port: [0xe800-0xe803]
[    0.101903] pci 0000:00:0f.0: reg 18 io port: [0xe400-0xe407]
[    0.101910] pci 0000:00:0f.0: reg 1c io port: [0xe000-0xe003]
[    0.101917] pci 0000:00:0f.0: reg 20 io port: [0xdc00-0xdc0f]
[    0.101923] pci 0000:00:0f.0: reg 24 io port: [0xd800-0xd8ff]
[    0.101989] pci 0000:00:0f.1: reg 20 io port: [0xfc00-0xfc0f]
[    0.102063] pci 0000:00:10.0: reg 20 io port: [0xc800-0xc81f]
[    0.102087] pci 0000:00:10.0: supports D1 D2
[    0.102090] pci 0000:00:10.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.102094] pci 0000:00:10.0: PME# disabled
[    0.102139] pci 0000:00:10.1: reg 20 io port: [0xcc00-0xcc1f]
[    0.102162] pci 0000:00:10.1: supports D1 D2
[    0.102164] pci 0000:00:10.1: PME# supported from D0 D1 D2 D3hot D3cold
[    0.102169] pci 0000:00:10.1: PME# disabled
[    0.102217] pci 0000:00:10.2: reg 20 io port: [0xd000-0xd01f]
[    0.102240] pci 0000:00:10.2: supports D1 D2
[    0.102242] pci 0000:00:10.2: PME# supported from D0 D1 D2 D3hot D3cold
[    0.102247] pci 0000:00:10.2: PME# disabled
[    0.102291] pci 0000:00:10.3: reg 20 io port: [0xd400-0xd41f]
[    0.102314] pci 0000:00:10.3: supports D1 D2
[    0.102317] pci 0000:00:10.3: PME# supported from D0 D1 D2 D3hot D3cold
[    0.102321] pci 0000:00:10.3: PME# disabled
[    0.102353] pci 0000:00:10.4: reg 10 32bit mmio: [0xdfffbe00-0xdfffbeff]
[    0.102390] pci 0000:00:10.4: supports D1 D2
[    0.102392] pci 0000:00:10.4: PME# supported from D0 D1 D2 D3hot D3cold
[    0.102397] pci 0000:00:10.4: PME# disabled
[    0.102455] HPET not enabled in BIOS. You might try hpet=force boot option
[    0.102507] pci 0000:00:11.5: reg 10 io port: [0xc400-0xc4ff]
[    0.102546] pci 0000:00:11.5: supports D1 D2
[    0.102580] pci 0000:00:12.0: reg 10 io port: [0xc000-0xc0ff]
[    0.102587] pci 0000:00:12.0: reg 14 32bit mmio: [0xdfffbd00-0xdfffbdff]
[    0.102622] pci 0000:00:12.0: supports D1 D2
[    0.102625] pci 0000:00:12.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.102629] pci 0000:00:12.0: PME# disabled
[    0.102678] pci 0000:01:00.0: reg 10 32bit mmio: [0xde000000-0xdeffffff]
[    0.102684] pci 0000:01:00.0: reg 14 32bit mmio pref: [0xd0000000-0xd7ffffff]
[    0.102701] pci 0000:01:00.0: reg 30 32bit mmio pref: [0xdfee0000-0xdfefffff]
[    0.102747] pci 0000:00:01.0: bridge 32bit mmio: [0xdde00000-0xdfefffff]
[    0.102753] pci 0000:00:01.0: bridge 32bit mmio pref: [0xcdd00000-0xddcfffff]
[    0.102760] pci_bus 0000:00: on NUMA node 0
[    0.102765] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[    0.117264] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 10 *11 12 14 15)
[    0.117374] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 *10 11 12 14 15)
[    0.117481] ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 7 10 11 12 14 15)
[    0.117588] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 7 10 11 12 14 15)
[    0.117693] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
[    0.117801] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
[    0.117907] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
[    0.118015] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
[    0.118146] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[    0.118150] vgaarb: loaded
[    0.118323] SCSI subsystem initialized
[    0.118442] libata version 3.00 loaded.
[    0.118550] usbcore: registered new interface driver usbfs
[    0.118574] usbcore: registered new interface driver hub
[    0.118615] usbcore: registered new device driver usb
[    0.118785] ACPI: WMI: Mapper loaded
[    0.118788] PCI: Using ACPI for IRQ routing
[    0.118962] NetLabel: Initializing
[    0.118964] NetLabel:  domain hash size = 128
[    0.118966] NetLabel:  protocols = UNLABELED CIPSOv4
[    0.118988] NetLabel:  unlabeled traffic allowed by default
[    0.119040] Switching to clocksource tsc
[    0.120001] AppArmor: AppArmor Filesystem Enabled
[    0.120001] pnp: PnP ACPI init
[    0.120001] ACPI: bus type pnp registered
[    0.122173] pnp: PnP ACPI: found 12 devices
[    0.122176] ACPI: ACPI bus type pnp unregistered
[    0.122182] PnPBIOS: Disabled by ACPI PNP
[    0.122203] system 00:05: ioport range 0x295-0x296 has been reserved
[    0.122207] system 00:05: ioport range 0x3f0-0x3f1 has been reserved
[    0.122211] system 00:05: ioport range 0x4d0-0x4d1 has been reserved
[    0.122214] system 00:05: ioport range 0x400-0x40f has been reserved
[    0.122218] system 00:05: ioport range 0x800-0x87f has been reserved
[    0.122223] system 00:05: iomem range 0xfec00000-0xfec00fff could not be reserved
[    0.122226] system 00:05: iomem range 0xfee00000-0xfee00fff has been reserved
[    0.156992] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
[    0.156995] pci 0000:00:01.0:   IO window: disabled
[    0.157002] pci 0000:00:01.0:   MEM window: 0xdde00000-0xdfefffff
[    0.157006] pci 0000:00:01.0:   PREFETCH window: 0xcdd00000-0xddcfffff
[    0.157026] pci 0000:00:01.0: setting latency timer to 64
[    0.157033] pci_bus 0000:00: resource 0 io:  [0x00-0xffff]
[    0.157036] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff]
[    0.157040] pci_bus 0000:01: resource 1 mem: [0xdde00000-0xdfefffff]
[    0.157043] pci_bus 0000:01: resource 2 pref mem [0xcdd00000-0xddcfffff]
[    0.157098] NET: Registered protocol family 2
[    0.157222] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.157826] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.160051] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[    0.161257] TCP: Hash tables configured (established 131072 bind 65536)
[    0.161261] TCP reno registered
[    0.161429] NET: Registered protocol family 1
[    0.161456] pci 0000:00:01.0: disabling DAC on VIA PCI bridge
[    0.161550] pci 0000:00:11.0: Bypassing VIA 8237 APIC De-Assert Message
[    0.161567] pci 0000:01:00.0: Boot video device
[    0.161911] cpufreq-nforce2: No nForce2 chipset.
[    0.161951] Scanning for low memory corruption every 60 seconds
[    0.162119] audit: initializing netlink socket (disabled)
[    0.162139] type=2000 audit(1272811424.160:1): initialized
[    0.171936] Trying to unpack rootfs image as initramfs...
[    0.185149] highmem bounce pool size: 64 pages
[    0.185160] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[    0.187094] VFS: Disk quotas dquot_6.5.2
[    0.187182] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    0.187905] fuse init (API version 7.13)
[    0.188014] msgmni has been set to 1709
[    0.193361] alg: No test for stdrng (krng)
[    0.193483] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[    0.193488] io scheduler noop registered
[    0.193490] io scheduler anticipatory registered
[    0.193493] io scheduler deadline registered
[    0.193557] io scheduler cfq registered (default)
[    0.193726] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    0.193755] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    0.193908] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[    0.193915] ACPI: Power Button [PWRB]
[    0.193986] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1
[    0.193996] ACPI: Sleep Button [SLPB]
[    0.194058] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[    0.194061] ACPI: Power Button [PWRF]
[    0.194320] processor LNXCPU:00: registered as cooling_device0
[    0.197983] isapnp: Scanning for PnP cards...
[    0.209586] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    0.209700] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[    0.210033] 00:02: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[    0.211416] brd: module loaded
[    0.212042] loop: module loaded
[    0.212166] input: Macintosh mouse button emulation as /devices/virtual/input/input3
[    0.212377]   alloc irq_desc for 20 on node -1
[    0.212380]   alloc kstat_irqs on node -1
[    0.212393] pata_acpi 0000:00:0f.1: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[    0.212494] pata_acpi 0000:00:0f.1: PCI INT A disabled
[    0.212856] Fixed MDIO Bus: probed
[    0.212898] PPP generic driver version 2.4.2
[    0.213008] tun: Universal TUN/TAP device driver, 1.6
[    0.213011] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[    0.213101] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.213122]   alloc irq_desc for 21 on node -1
[    0.213125]   alloc kstat_irqs on node -1
[    0.213130] ehci_hcd 0000:00:10.4: PCI INT C -> GSI 21 (level, low) -> IRQ 21
[    0.213155] ehci_hcd 0000:00:10.4: EHCI Host Controller
[    0.213197] ehci_hcd 0000:00:10.4: new USB bus registered, assigned bus number 1
[    0.213290] ehci_hcd 0000:00:10.4: irq 21, io mem 0xdfffbe00
[    0.256824] ehci_hcd 0000:00:10.4: USB 2.0 started, EHCI 1.00
[    0.256976] usb usb1: configuration #1 chosen from 1 choice
[    0.257024] hub 1-0:1.0: USB hub found
[    0.257046] hub 1-0:1.0: 8 ports detected
[    0.257121] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    0.257136] uhci_hcd: USB Universal Host Controller Interface driver
[    0.257171] uhci_hcd 0000:00:10.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
[    0.257179] uhci_hcd 0000:00:10.0: UHCI Host Controller
[    0.257227] uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 2
[    0.257249] uhci_hcd 0000:00:10.0: irq 21, io base 0x0000c800
[    0.257389] usb usb2: configuration #1 chosen from 1 choice
[    0.257419] hub 2-0:1.0: USB hub found
[    0.257434] hub 2-0:1.0: 2 ports detected
[    0.257486] uhci_hcd 0000:00:10.1: PCI INT A -> GSI 21 (level, low) -> IRQ 21
[    0.257493] uhci_hcd 0000:00:10.1: UHCI Host Controller
[    0.257530] uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 3
[    0.257550] uhci_hcd 0000:00:10.1: irq 21, io base 0x0000cc00
[    0.257680] usb usb3: configuration #1 chosen from 1 choice
[    0.257710] hub 3-0:1.0: USB hub found
[    0.257724] hub 3-0:1.0: 2 ports detected
[    0.257774] uhci_hcd 0000:00:10.2: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[    0.257781] uhci_hcd 0000:00:10.2: UHCI Host Controller
[    0.257822] uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 4
[    0.257843] uhci_hcd 0000:00:10.2: irq 21, io base 0x0000d000
[    0.257976] usb usb4: configuration #1 chosen from 1 choice
[    0.258005] hub 4-0:1.0: USB hub found
[    0.258025] hub 4-0:1.0: 2 ports detected
[    0.258072] uhci_hcd 0000:00:10.3: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[    0.258079] uhci_hcd 0000:00:10.3: UHCI Host Controller
[    0.258117] uhci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 5
[    0.258138] uhci_hcd 0000:00:10.3: irq 21, io base 0x0000d400
[    0.258245] usb usb5: configuration #1 chosen from 1 choice
[    0.258274] hub 5-0:1.0: USB hub found
[    0.258287] hub 5-0:1.0: 2 ports detected
[    0.258395] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[    0.261291] serio: i8042 KBD port at 0x60,0x64 irq 1
[    0.261302] serio: i8042 AUX port at 0x60,0x64 irq 12
[    0.261492] mice: PS/2 mouse device common for all mice
[    0.261682] rtc_cmos 00:07: RTC can wake from S4
[    0.261760] rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0
[    0.261815] rtc0: alarms up to one year, y3k, 114 bytes nvram
[    0.261958] device-mapper: uevent: version 1.0.3
[    0.264415] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com
[    0.265023] device-mapper: multipath: version 1.1.0 loaded
[    0.265028] device-mapper: multipath round-robin: version 1.0.0 loaded
[    0.266346] EISA: Probing bus 0 at eisa.0
[    0.266383] EISA: Detected 0 cards.
[    0.268651] cpuidle: using governor ladder
[    0.268654] cpuidle: using governor menu
[    0.269220] TCP cubic registered
[    0.269403] NET: Registered protocol family 10
[    0.269933] lo: Disabled Privacy Extensions
[    0.270277] NET: Registered protocol family 17
[    0.270334] powernow-k8: Processor cpuid 6a0 not supported
[    0.270373] Using IPI No-Shortcut mode
[    0.270541] PM: Resume from disk failed.
[    0.270566] registered taskstats version 1
[    0.270845]   Magic number: 10:311:737
[    0.271047] rtc_cmos 00:07: setting system clock to 2010-05-02 14:43:45 UTC (1272811425)
[    0.271052] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    0.271054] EDD information not available.
[    0.278445] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
[    0.713128] Freeing initrd memory: 7775k freed
[    0.815886] isapnp: No Plug & Play device found
[    0.815918] Freeing unused kernel memory: 656k freed
[    0.817501] Write protecting the kernel text: 4676k
[    0.817536] Write protecting the kernel read-only data: 1840k
[    0.844244] udev: starting version 151
[    1.021145] usb 2-2: new full speed USB device using uhci_hcd and address 2
[    1.081329] Floppy drive(s): fd0 is 1.44M
[    1.089757] sata_via 0000:00:0f.0: version 2.4
[    1.089792] sata_via 0000:00:0f.0: PCI INT B -> GSI 20 (level, low) -> IRQ 20
[    1.089874] sata_via 0000:00:0f.0: routed to hard irq line 10
[    1.099883] scsi0 : sata_via
[    1.104283] FDC 0 is a post-1991 82077
[    1.108278] scsi1 : sata_via
[    1.108356] ata1: SATA max UDMA/133 cmd 0xec00 ctl 0xe800 bmdma 0xdc00 irq 20
[    1.108360] ata2: SATA max UDMA/133 cmd 0xe400 ctl 0xe000 bmdma 0xdc08 irq 20
[    1.108442] pata_via 0000:00:0f.1: version 0.3.4
[    1.108463] pata_via 0000:00:0f.1: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[    1.112108] via-rhine.c:v1.10-LK1.4.3 2007-03-06 Written by Donald Becker
[    1.115311] scsi2 : pata_via
[    1.119164] scsi3 : pata_via
[    1.121443] ata3: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xfc00 irq 14
[    1.121447] ata4: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xfc08 irq 15
[    1.121751]   alloc irq_desc for 23 on node -1
[    1.121754]   alloc kstat_irqs on node -1
[    1.121767] via-rhine 0000:00:12.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[    1.122548] eth0: VIA Rhine II at 0xdfffbd00, 00:13:8f:0a:13:3d, IRQ 23.
[    1.123253] eth0: MII PHY found at address 1, status 0x786d advertising 05e1 Link 45e1.
[    1.182383] usb 2-2: configuration #1 chosen from 1 choice
[    1.312020] ata1: SATA link down 1.5 Gbps (SStatus 0 SControl 300)
[    1.340568] ata3.00: ATA-6: ST3160023A, 8.01, max UDMA/100
[    1.340573] ata3.00: 312581808 sectors, multi 16: LBA48 
[    1.356411] ata3.00: configured for UDMA/100
[    1.432015] usb 4-1: new full speed USB device using uhci_hcd and address 2
[    1.524011] ata2: SATA link down 1.5 Gbps (SStatus 0 SControl 300)
[    1.534701] scsi 2:0:0:0: Direct-Access     ATA      ST3160023A       8.01 PQ: 0 ANSI: 5
[    1.534959] sd 2:0:0:0: Attached scsi generic sg0 type 0
[    1.535405] sd 2:0:0:0: [sda] 312581808 512-byte logical blocks: (160 GB/149 GiB)
[    1.535470] sd 2:0:0:0: [sda] Write Protect is off
[    1.535473] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    1.535507] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.535701]  sda: sda1 sda2 < sda5 sda6 >
[    1.584155] sd 2:0:0:0: [sda] Attached SCSI disk
[    1.620909] usb 4-1: configuration #1 chosen from 1 choice
[    1.720371] ata4.00: ATAPI: TSSTcorpCD/DVDW SH-W162C, TS05, max UDMA/33
[    1.760238] ata4.00: configured for UDMA/33
[    1.761597] scsi 3:0:0:0: CD-ROM            TSSTcorp CD/DVDW SH-W162C TS05 PQ: 0 ANSI: 5
[    1.769476] sr0: scsi3-mmc drive: 48x/48x writer cd/rw xa/form2 cdda tray
[    1.769481] Uniform CD-ROM driver Revision: 3.20
[    1.769794] sr 3:0:0:0: Attached scsi CD-ROM sr0
[    1.769977] sr 3:0:0:0: Attached scsi generic sg1 type 5
[    2.164963] EXT4-fs (sda1): mounted filesystem with ordered data mode
[   15.577826] udev: starting version 151
[   15.588796] Adding 1020088k swap on /dev/sda6.  Priority:-1 extents:1 across:1020088k 
[   15.789310] lp: driver loaded but no devices found
[   15.841280] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[   15.989044] parport_pc 00:03: reported by Plug and Play ACPI
[   15.989163] parport0: PC-style at 0x378 (0x778), irq 7, dma 0 [PCSPP,TRISTATE,COMPAT,EPP,ECP,DMA]
[   15.991150] Linux agpgart interface v0.103
[   16.132602] agpgart: Detected VIA KT400/KT400A/KT600 chipset
[   16.139597] lp0: using parport0 (interrupt-driven).
[   16.230281] Linux video capture interface: v2.00
[   16.246933] agpgart-via 0000:00:00.0: AGP aperture is 64M @ 0xe0000000
[   16.263496] psmouse serio1: ID: 10 00 64
[   16.294859] Bluetooth: Core ver 2.15
[   16.297983] NET: Registered protocol family 31
[   16.297988] Bluetooth: HCI device and connection manager initialized
[   16.297994] Bluetooth: HCI socket layer initialized
[   16.307986] gspca: main v2.7.0 registered
[   16.327001] gspca: probing 045e:00f5
[   16.329112] vga16fb: initializing
[   16.329119] vga16fb: mapped to 0xc00a0000
[   16.329231] fb0: VGA16 VGA frame buffer device
[   16.335190] Bluetooth: Generic Bluetooth USB driver ver 0.6
[   16.335596] usbcore: registered new interface driver btusb
[   16.339338] sonixj: Sonix chip id: 11
[   16.341258] gspca: probe ok
[   16.341284] gspca: probing 045e:00f5
[   16.341299] gspca: probing 045e:00f5
[   16.341332] usbcore: registered new interface driver sonixj
[   16.341594] sonixj: registered
[   16.348113] logips2pp: Detected unknown logitech mouse model 127
[   16.454111] gameport: NS558 PnP Gameport is pnp00:04/gameport0, io 0x200, speed 1028kHz
[   16.467338] type=1505 audit(1272811441.692:2):  operation="profile_load" pid=503 name="/sbin/dhclient3"
[   16.467694] type=1505 audit(1272811441.692:3):  operation="profile_load" pid=503 name="/usr/lib/NetworkManager/nm-dhcp-client.action"
[   16.467898] type=1505 audit(1272811441.692:4):  operation="profile_load" pid=503 name="/usr/lib/connman/scripts/dhclient-script"
[   16.602007] nvidia: module license 'NVIDIA' taints kernel.
[   16.602013] Disabling lock debugging due to kernel taint
[   17.225851] input: ImExPS/2 Logitech Explorer Mouse as /devices/platform/i8042/serio1/input/input5
[   17.519287] ppdev: user-space parallel port driver
[   17.639930] ip_tables: (C) 2000-2006 Netfilter Core Team
[   17.692891] EXT4-fs (sda5): mounted filesystem with ordered data mode
[   17.703486] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[   17.706062] CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use
[   17.706069] nf_conntrack.acct=1 kernel parameter, acct=1 nf_conntrack module option or
[   17.706072] sysctl net.netfilter.nf_conntrack_acct=1 to enable it.
[   17.939050]   alloc irq_desc for 22 on node -1
[   17.939054]   alloc kstat_irqs on node -1
[   17.939066] VIA 82xx Audio 0000:00:11.5: PCI INT C -> GSI 22 (level, low) -> IRQ 22
[   17.939233] VIA 82xx Audio 0000:00:11.5: setting latency timer to 64
[   17.940862] ip6_tables: (C) 2000-2006 Netfilter Core Team
[   17.941350] Console: switching to colour frame buffer device 80x30
[   17.966451] usbcore: registered new interface driver snd-usb-audio
[   18.098654]   alloc irq_desc for 16 on node -1
[   18.098660]   alloc kstat_irqs on node -1
[   18.098672] nvidia 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[   18.101063] NVRM: loading NVIDIA UNIX x86 Kernel Module  173.14.22  Sun Nov  8 20:26:31 PST 2009
[   19.218159] type=1505 audit(1272811444.444:5):  operation="profile_load" pid=805 name="/usr/share/gdm/guest-session/Xsession"
[   19.227267] type=1505 audit(1272811444.452:6):  operation="profile_replace" pid=806 name="/sbin/dhclient3"
[   19.227659] type=1505 audit(1272811444.452:7):  operation="profile_replace" pid=806 name="/usr/lib/NetworkManager/nm-dhcp-client.action"
[   19.227880] type=1505 audit(1272811444.452:8):  operation="profile_replace" pid=806 name="/usr/lib/connman/scripts/dhclient-script"
[   19.290088] type=1505 audit(1272811444.516:9):  operation="profile_load" pid=809 name="/usr/bin/evince"
[   19.307049] eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
[   19.310820] type=1505 audit(1272811444.536:10):  operation="profile_load" pid=809 name="/usr/bin/evince-previewer"
[   19.334752] type=1505 audit(1272811444.560:11):  operation="profile_load" pid=809 name="/usr/bin/evince-thumbnailer"
[   19.894187] Bluetooth: L2CAP ver 2.14
[   19.894194] Bluetooth: L2CAP socket layer initialized
[   19.919564] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   19.919571] Bluetooth: BNEP filters: protocol multicast]

Ubuntu 12.04 LTS Linux mint Kathia
Groove Salad: a nicely chilled plate of ambient

Hors ligne

Haut de page ↑