#1 Le 03/05/2010, à 18:58
- Barrin
Je ne peux plus scanner sous ubuntu 10.4
Salut!
J'avais installé sous ubuntu 9.4 une imprimante multifcontion Brother DCP-375CW (leur site est très bien fait pour les utilisateurs de linux). Le scanner fonctionnait très bien.
Voila que depuis que j'ai "upgradé" Ubuntu à la version 10.4, le scanner n'est plus reconnu tout simplement, xsane ne le voit plus!
que puis-je faire???
merci
Dernière modification par Barrin (Le 03/05/2010, à 18:59)
Hors ligne
#2 Le 03/05/2010, à 19:49
- Fretz
Re : Je ne peux plus scanner sous ubuntu 10.4
Salut,
J'ai le même soucis avec une multifonction b109 de chez HP.
J'ai désinstallé/réinstallé HPLIP mais le scanner reste définitivement introuvable.
Il se passe certainement quelque chose lors de la mise à niveau vers 10.04 mais quoi?
Si quelqu'un pouvais nous aider ce serait vraiment sympa.
Merci
Hors ligne
#3 Le 04/05/2010, à 21:35
- Fretz
Re : Je ne peux plus scanner sous ubuntu 10.4
Bon quelques nouvelles à propos de ce scanner récalcitrant.
J'ai désinstaller/réinstaller Xsane et tout ce qui va avec via Synaptics --> Pas de changements...
la commande lsusb me donne:
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 004: ID 03f0:7a11 Hewlett-Packard
Bus 001 Device 002: ID 05e3:070e Genesys Logic, Inc. X-PRO CR20xA USB 2.0 Internal Card Reader
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
et la commande sane-find-scanner me donne:
# sane-find-scanner will now attempt to detect your scanner. If the
# result is different from what you expected, first make sure your
# scanner is powered up and properly connected to your computer.
# No SCSI scanners found. If you expected something different, make sure that
# you have loaded a kernel SCSI driver for your SCSI adapter.
found USB scanner (vendor=0x03f0 [HP], product=0x7a11 [Photosmart B109a-m]) at libusb:001:004
# Your USB scanner was (probably) detected. It may or may not be supported by
# SANE. Try scanimage -L and read the backend's manpage.
# Not checking for parallel port scanners.
# Most Scanners connected to the parallel port or other proprietary ports
# can't be detected by this program.
Tandis que la commande scanimage -L me donne:
No scanners were identified. If you were expecting something different,
check that the scanner is plugged in, turned on and detected by the
sane-find-scanner tool (if appropriate). Please read the documentation
which came with this software (README, FAQ, manpages).
Donc si je comprends bien, Ubuntu reconnait le scanner sur le port USB. Mais il ne le retrouve pas avec SANE.
Une âme charitable y comprendrait-elle quelque chose? HELP !
Merci d'avance.
Fretz
Hors ligne
#4 Le 04/05/2010, à 21:43
- piejearoso
Re : Je ne peux plus scanner sous ubuntu 10.4
Bonsoir
Avez vous essayé avec le nouveau logiciel installé par défaut, simple scan? reconnait il vos scanners?
A+
pierre
Avec ubuntu depuis la LTS 08.04 10 ans déjà ...Heureux d'avoir découvert Linux et Ubuntu:
pc et portables migrés sous ubuntu! ça devient de plus en plus facile
merci à tous les développeurs de linux et aux actifs du site
Que vive le libre
Hors ligne
#5 Le 04/05/2010, à 21:48
- Fretz
Re : Je ne peux plus scanner sous ubuntu 10.4
Bonsoir Pierre,
Non Simple Scan me dit "Aucun scanneur n'a été détecté. Veuillez vérifier que votre scanneur est connecté et sous tension" alors que Xsane me répond "No devices available".
Merci @+
Frédéric
Hors ligne
#6 Le 04/05/2010, à 23:39
- RodolpheB
Re : Je ne peux plus scanner sous ubuntu 10.4
Exactement la même chose avec ma DCP-770CW...
LDLC 2nd Boss / Mint 15 (Cinnamon) / NVIDIA GeForce GT 430 / Core i3 540 / 8 GO RAM
Acer Aspire 1410 11.6 / Mint 15 (Cinnamon) / Intel GMA / Celeron / 4 GO RAM
Hors ligne
#7 Le 05/05/2010, à 07:27
- piejearoso
Re : Je ne peux plus scanner sous ubuntu 10.4
Bonjour
Désolé, mais je ne suis pas assez compétent pour vous aider.
Pierre
Avec ubuntu depuis la LTS 08.04 10 ans déjà ...Heureux d'avoir découvert Linux et Ubuntu:
pc et portables migrés sous ubuntu! ça devient de plus en plus facile
merci à tous les développeurs de linux et aux actifs du site
Que vive le libre
Hors ligne
#8 Le 05/05/2010, à 09:06
- chris.gian
Re : Je ne peux plus scanner sous ubuntu 10.4
Bonjour,
Même problème que Fretz après un passage à 10.04. Mon MFC Brother 9880 peut imprimer, mais pas possible de scanner. Qui a la réponse ...
Chris
Hors ligne
#9 Le 05/05/2010, à 10:03
- fabux
Re : Je ne peux plus scanner sous ubuntu 10.4
Salut,
pas encore sur lucid mais vous avez tenté de réinstaller brscan (scan éteint) et vérifier que la règle udev existe toujours?
edit: oublié de demander gksudo xsane?
Dernière modification par fabux (Le 05/05/2010, à 10:05)
May linux be with you
Comment poster un message.
Je me présente dans la doc
Hors ligne
#10 Le 05/05/2010, à 13:28
- Fretz
Re : Je ne peux plus scanner sous ubuntu 10.4
gksudo xsane me donne la même chose que quand je lance xsane directement à savoir "No devices available".
brscan? Je connais pas cette bête... Non sérieux en fouillant dans Synaptics, je trouve nul part brscan. Peut-être qu'il manque des dépôts?
La règle udev ? Alors là je suis perdu, si tu pouvais m'expliquer ce que c'est?
Merci et merci à piejearoso d'avoir essayé.
Hors ligne
#11 Le 05/05/2010, à 14:12
- fabux
Re : Je ne peux plus scanner sous ubuntu 10.4
désolé Fretz, en fait mon message s'adresse plus au possesseur de brother. Brscan (2 ou 3 selon le modèle d'imprimante) est à télécharger depuis le site de brother.
May linux be with you
Comment poster un message.
Je me présente dans la doc
Hors ligne
#12 Le 05/05/2010, à 14:38
- RodolpheB
Re : Je ne peux plus scanner sous ubuntu 10.4
désolé Fretz, en fait mon message s'adresse plus au possesseur de brother. Brscan (2 ou 3 selon le modèle d'imprimante) est à télécharger depuis le site de brother.
Le scan est bien déclaré via brsanconfig2, comme je l'ai toujours fait avec cet appareil. Il est bien vu par cet outil. Mais impossible de scanner.
Brother 770CW en wifi, sans souci jusqu'à 9.10, souci depuis 10.04
LDLC 2nd Boss / Mint 15 (Cinnamon) / NVIDIA GeForce GT 430 / Core i3 540 / 8 GO RAM
Acer Aspire 1410 11.6 / Mint 15 (Cinnamon) / Intel GMA / Celeron / 4 GO RAM
Hors ligne
#13 Le 05/05/2010, à 17:20
- fabux
Re : Je ne peux plus scanner sous ubuntu 10.4
Et tu as tenté une réinstalle de brscan? en usb ça donne quoi?
May linux be with you
Comment poster un message.
Je me présente dans la doc
Hors ligne
#14 Le 05/05/2010, à 17:28
- RodolpheB
Re : Je ne peux plus scanner sous ubuntu 10.4
Oui en effet j'ai réinstallé tout à l'heure et après avoir de nouveau déclaré le scanner ça semble fonctionner.
Rodolphe
LDLC 2nd Boss / Mint 15 (Cinnamon) / NVIDIA GeForce GT 430 / Core i3 540 / 8 GO RAM
Acer Aspire 1410 11.6 / Mint 15 (Cinnamon) / Intel GMA / Celeron / 4 GO RAM
Hors ligne
#15 Le 05/05/2010, à 22:50
- Bionet
Re : Je ne peux plus scanner sous ubuntu 10.4
Bonjour,
je me permet de compléter ce fil avec ma petite question sur le même thème.
Peut être que fabus va pouvoir m'aider car c'est lui qui m'a mis sur la voie.
J'ai un scanner (imprimante multifonction dont les caractéristiques suivent) qui refuse de scanner (que ce soit avec simple-scan ou xsane) alors que ça fonctionnait directement en 9.10. Enfin, c'est pas tout à fait vrai puisqu'un gksudo xsane fonctionne lui.
Donc voilà ma question : comment puis-je faire pour pouvoir scanner sans passer en sudo ?
bien cordialement,
Bionet
à titre purement informatif, voici ce que j'ai fais précédemment :
installation du scanner (procédure qui fonctionnait seule directement sous 9.10) :
http://ubuntuauquotidien.wordpress.com/2009/11/10/scanner-avec-une-brother-7030-sous-ubuntu/
puis :
http://forum.ubuntu-fr.org/viewtopic.php?id=392695 (procédure identique quasiment).
lsusb :
Bus 002 Device 004: ID 04f9:01ea Brother Industries, Ltd
sane-find-scanner :
# sane-find-scanner will now attempt to detect your scanner. If the
# result is different from what you expected, first make sure your
# scanner is powered up and properly connected to your computer.
# No SCSI scanners found. If you expected something different, make sure that
# you have loaded a kernel SCSI driver for your SCSI adapter.
found USB scanner (vendor=0x04f9, product=0x01ea) at libusb:002:004
# Your USB scanner was (probably) detected. It may or may not be supported by
# SANE. Try scanimage -L and read the backend's manpage.
# Not checking for parallel port scanners.
# Most Scanners connected to the parallel port or other proprietary ports
# can't be detected by this program.
# You may want to run this program as root to find all devices. Once you
# found the scanner devices, be sure to adjust access permissions as
# necessary.
scanimage -L :
device `brother3:bus1;dev1' is a Brother DCP-7030 USB scanner
brscan-skey --diagnosis :
-------/usr/local/Brother/sane/brsaneconfig3 -d------------------------------------
cat /etc/fstab
# /etc/fstab: static file system information.
#
# Use 'blkid -o value -s UUID' to print the universally unique identifier
# for a device; this may be used with UUID= as a more robust way to name
# devices that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point> <type> <options> <dump> <pass>
proc /proc proc nodev,noexec,nosuid 0 0
# / was on /dev/sdb1 during installation
UUID=e0459fc7-bdaf-41f4-815a-589a62fd28c0 / ext4 errors=remount-ro 0 1
# /home was on /dev/sdb5 during installation
UUID=b604c504-3818-41e2-bbc9-1940031e6bbc /home ext4 defaults 0 2
# /home/media was on /dev/sdc5 during installation
UUID=74880029-2d2a-4b74-a80a-4f3fabbee945 /home/media ext4 defaults 0 2
# /var was on /dev/sda1 during installation
UUID=1e75fb55-791c-44fa-af16-00eaf4026867 /var ext4 defaults 0 2
# swap was on /dev/sdc1 during installation
UUID=ef90af3b-0108-454c-941f-6d83a458b286 none swap sw 0 0
-----------------------------
sane-find-scanner
# sane-find-scanner will now attempt to detect your scanner. If the
# result is different from what you expected, first make sure your
# scanner is powered up and properly connected to your computer.
# No SCSI scanners found. If you expected something different, make sure that
# you have loaded a kernel SCSI driver for your SCSI adapter.
found USB scanner (vendor=0x04f9, product=0x01ea) at libusb:002:004
# Your USB scanner was (probably) detected. It may or may not be supported by
# SANE. Try scanimage -L and read the backend's manpage.
# Not checking for parallel port scanners.
# Most Scanners connected to the parallel port or other proprietary ports
# can't be detected by this program.
# You may want to run this program as root to find all devices. Once you
# found the scanner devices, be sure to adjust access permissions as
# necessary.
-----------------------------
ls -R -all /proc/bus/usb
ls: ne peut accéder /proc/bus/usb: Aucun fichier ou dossier de ce type
-----------------------------
cat /proc/bus/usb/devices
cat: /proc/bus/usb/devices: Aucun fichier ou dossier de ce type
-----------------------------
scanimage -L
device `brother3:bus1;dev1' is a Brother DCP-7030 USB scanner
-----------------------------
-----------------------------
/usr/local/Brother/sane/brsanenetdevice3.cfg:
-----------------------------
/usr/local/Brother/sane/Brsane3.ini:
[Support Model]
0x0206,14,2,"DCP-145C"
0x0204,14,2,"DCP-165C"
0x0205,13,2,"DCP-185C"
0x0201,14,2,"DCP-385C"
0x0200,14,2,"DCP-585CW"
0x01ff,13,2,"DCP-535CN"
0x01fe,14,1,"MFC-250C"
0x01fd,13,1,"MFC-290C"
0x01fb,13,1,"MFC-490CW"
0x01fa,13,1,"MFC-490CN"
0x01f9,13,1,"MFC-790CW"
0x01f8,13,1,"MFC-990CW"
0x01f7,14,1,"MFC-670CD"
0x01f6,13,1,"MFC-930CDN"
0x01f5,13,1,"MFC-5490CN"
0x01f4,13,1,"MFC-5890CN"
0x01f1,13,2,"DCP-6690CW"
0x01f3,13,1,"MFC-6490CW"
0x01f2,13,1,"MFC-6490CN"
0x01f0,13,1,"MFC-6890CDW"
0x01ef,13,1,"MFC-6890CN"
0x0207,14,2,"DCP-163C"
0x0208,14,2,"DCP-167C"
0x0203,14,2,"DCP-383C"
0x0202,14,2,"DCP-387C"
0x01fc,13,1,"MFC-297C"
0x01ee,1,1,"MFC-7450",131,4
0x01ed,1,1,"MFC-7840N",131,4
0x01eb,1,1,"MFC-7320",131,4
0x01ea,2,2,"DCP-7030",131,4
0x01e9,1,2,"DCP-7040",131,4
0x01e8,1,2,"DCP-7045N",131,4
0x01e7,1,1,"MFC-7340",131,4
0x01e6,1,1,"MFC-7440N",131,4
0x01e5,1,1,"MFC-7840W",131,4
0x0218,17,1,"DCP-8080DN",133,4
0x021f,117,1,"DCP-8085DN",133,4
0x0217,17,1,"MFC-8480DN",133,4
0x0215,117,1,"MFC-8890DW",133,4
[ModelTypeName]
1=MFC Scanner
2=DCP Scanner
[Driver]
scanfast24=0
NoUseCM=0
compression=1
Inqueue=32000
LogFile=0
xshift_c=0
-----------------------------
/usr/local/Brother/sane/models3/ext1.ini:
[Support Model]
0x0222,14,2,"DCP-195C"
0x0223,14,2,"DCP-365CN"
0x0224,14,2,"DCP-375CW"
0x0225,14,2,"DCP-395CN"
0x0229,13,1,"MFC-295CN"
0x022a,13,1,"MFC-495CW"
0x022c,13,1,"MFC-795CW"
0x0228,14,1,"MFC-255CW"
0x0236,14,2,"DCP-390CN"
0x0227,13,2,"DCP-595CN"
0x022b,13,1,"MFC-495CN"
0x022d,14,1,"MFC-675CD"
0x022e,14,1,"MFC-695CDN"
0x022f,14,1,"MFC-735CD"
0x0230,13,1,"MFC-935CDN"
0x021b,17,2,"DCP-8070D",133,4
0x021a,17,1,"MFC-8370DN",133,4
0x0219,117,1,"MFC-8380DN",133,4
0x023f,117,1,"MFC-8680DN",133,4
0x0216,117,1,"MFC-8880DN",133,4
0x021d,17,1,"MFC-9120CN"
0x021c,17,1,"MFC-9320CW"
0x0220,17,1,"MFC-9010CN"
0x021e,17,2,"DCP-9010CN"
-----------------------------
/usr/local/Brother/sane/models3/ext2.ini:
[Support Model]
0x23e,14,2,"DCP-197C"
0x235,14,2,"DCP-377CW"
0x23a,14,1,"MFC-257CW"
-----------------------------
MODEL:"DCP-195C",ID:0x4f9:0x222,TYPE:14,2,RE:0xffff,WE:0xffff CM:,,
MODEL:"DCP-365CN",ID:0x4f9:0x223,TYPE:14,2,RE:0xffff,WE:0xffff CM:,,
MODEL:"DCP-375CW",ID:0x4f9:0x224,TYPE:14,2,RE:0xffff,WE:0xffff CM:,,
MODEL:"DCP-395CN",ID:0x4f9:0x225,TYPE:14,2,RE:0xffff,WE:0xffff CM:,,
MODEL:"MFC-295CN",ID:0x4f9:0x229,TYPE:13,1,RE:0xffff,WE:0xffff CM:,,
MODEL:"MFC-495CW",ID:0x4f9:0x22a,TYPE:13,1,RE:0xffff,WE:0xffff CM:,,
MODEL:"MFC-795CW",ID:0x4f9:0x22c,TYPE:13,1,RE:0xffff,WE:0xffff CM:,,
MODEL:"MFC-255CW",ID:0x4f9:0x228,TYPE:14,1,RE:0xffff,WE:0xffff CM:,,
MODEL:"DCP-390CN",ID:0x4f9:0x236,TYPE:14,2,RE:0xffff,WE:0xffff CM:,,
MODEL:"DCP-595CN",ID:0x4f9:0x227,TYPE:13,2,RE:0xffff,WE:0xffff CM:,,
MODEL:"MFC-495CN",ID:0x4f9:0x22b,TYPE:13,1,RE:0xffff,WE:0xffff CM:,,
MODEL:"MFC-675CD",ID:0x4f9:0x22d,TYPE:14,1,RE:0xffff,WE:0xffff CM:,,
MODEL:"MFC-695CDN",ID:0x4f9:0x22e,TYPE:14,1,RE:0xffff,WE:0xffff CM:,,
MODEL:"MFC-735CD",ID:0x4f9:0x22f,TYPE:14,1,RE:0xffff,WE:0xffff CM:,,
MODEL:"MFC-935CDN",ID:0x4f9:0x230,TYPE:13,1,RE:0xffff,WE:0xffff CM:,,
MODEL:"DCP-8070D",ID:0x4f9:0x21b,TYPE:17,2,RE:0x85,WE:0x4 CM:,,
MODEL:"MFC-8370DN",ID:0x4f9:0x21a,TYPE:17,1,RE:0x85,WE:0x4 CM:,,
MODEL:"MFC-8380DN",ID:0x4f9:0x219,TYPE:17,1,RE:0x85,WE:0x4 CM:,,
MODEL:"MFC-8680DN",ID:0x4f9:0x23f,TYPE:17,1,RE:0x85,WE:0x4 CM:,,
MODEL:"MFC-8880DN",ID:0x4f9:0x216,TYPE:17,1,RE:0x85,WE:0x4 CM:,,
MODEL:"MFC-9120CN",ID:0x4f9:0x21d,TYPE:17,1,RE:0xffff,WE:0xffff CM:,,
MODEL:"MFC-9320CW",ID:0x4f9:0x21c,TYPE:17,1,RE:0xffff,WE:0xffff CM:,,
MODEL:"MFC-9010CN",ID:0x4f9:0x220,TYPE:17,1,RE:0xffff,WE:0xffff CM:,,
MODEL:"DCP-9010CN",ID:0x4f9:0x21e,TYPE:17,2,RE:0xffff,WE:0xffff CM:,,
MODEL:"DCP-197C",ID:0x4f9:0x23e,TYPE:14,2,RE:0xffff,WE:0xffff CM:,,
MODEL:"DCP-377CW",ID:0x4f9:0x235,TYPE:14,2,RE:0xffff,WE:0xffff CM:,,
MODEL:"MFC-257CW",ID:0x4f9:0x23a,TYPE:14,1,RE:0xffff,WE:0xffff CM:,,
MODEL:"DCP-145C",ID:0x4f9:0x206,TYPE:14,2,RE:0xffff,WE:0xffff CM:,,
MODEL:"DCP-165C",ID:0x4f9:0x204,TYPE:14,2,RE:0xffff,WE:0xffff CM:,,
MODEL:"DCP-185C",ID:0x4f9:0x205,TYPE:13,2,RE:0xffff,WE:0xffff CM:,,
MODEL:"DCP-385C",ID:0x4f9:0x201,TYPE:14,2,RE:0xffff,WE:0xffff CM:,,
MODEL:"DCP-585CW",ID:0x4f9:0x200,TYPE:14,2,RE:0xffff,WE:0xffff CM:,,
MODEL:"DCP-535CN",ID:0x4f9:0x1ff,TYPE:13,2,RE:0xffff,WE:0xffff CM:,,
MODEL:"MFC-250C",ID:0x4f9:0x1fe,TYPE:14,1,RE:0xffff,WE:0xffff CM:,,
MODEL:"MFC-290C",ID:0x4f9:0x1fd,TYPE:13,1,RE:0xffff,WE:0xffff CM:,,
MODEL:"MFC-490CW",ID:0x4f9:0x1fb,TYPE:13,1,RE:0xffff,WE:0xffff CM:,,
MODEL:"MFC-490CN",ID:0x4f9:0x1fa,TYPE:13,1,RE:0xffff,WE:0xffff CM:,,
MODEL:"MFC-790CW",ID:0x4f9:0x1f9,TYPE:13,1,RE:0xffff,WE:0xffff CM:,,
MODEL:"MFC-990CW",ID:0x4f9:0x1f8,TYPE:13,1,RE:0xffff,WE:0xffff CM:,,
MODEL:"MFC-670CD",ID:0x4f9:0x1f7,TYPE:14,1,RE:0xffff,WE:0xffff CM:,,
MODEL:"MFC-930CDN",ID:0x4f9:0x1f6,TYPE:13,1,RE:0xffff,WE:0xffff CM:,,
MODEL:"MFC-5490CN",ID:0x4f9:0x1f5,TYPE:13,1,RE:0xffff,WE:0xffff CM:,,
MODEL:"MFC-5890CN",ID:0x4f9:0x1f4,TYPE:13,1,RE:0xffff,WE:0xffff CM:,,
MODEL:"DCP-6690CW",ID:0x4f9:0x1f1,TYPE:13,2,RE:0xffff,WE:0xffff CM:,,
MODEL:"MFC-6490CW",ID:0x4f9:0x1f3,TYPE:13,1,RE:0xffff,WE:0xffff CM:,,
MODEL:"MFC-6490CN",ID:0x4f9:0x1f2,TYPE:13,1,RE:0xffff,WE:0xffff CM:,,
MODEL:"MFC-6890CDW",ID:0x4f9:0x1f0,TYPE:13,1,RE:0xffff,WE:0xffff CM:,,
MODEL:"MFC-6890CN",ID:0x4f9:0x1ef,TYPE:13,1,RE:0xffff,WE:0xffff CM:,,
MODEL:"DCP-163C",ID:0x4f9:0x207,TYPE:14,2,RE:0xffff,WE:0xffff CM:,,
MODEL:"DCP-167C",ID:0x4f9:0x208,TYPE:14,2,RE:0xffff,WE:0xffff CM:,,
MODEL:"DCP-383C",ID:0x4f9:0x203,TYPE:14,2,RE:0xffff,WE:0xffff CM:,,
MODEL:"DCP-387C",ID:0x4f9:0x202,TYPE:14,2,RE:0xffff,WE:0xffff CM:,,
MODEL:"MFC-297C",ID:0x4f9:0x1fc,TYPE:13,1,RE:0xffff,WE:0xffff CM:,,
MODEL:"MFC-7450",ID:0x4f9:0x1ee,TYPE:1,1,RE:0x83,WE:0x4 CM:,,
MODEL:"MFC-7840N",ID:0x4f9:0x1ed,TYPE:1,1,RE:0x83,WE:0x4 CM:,,
MODEL:"MFC-7320",ID:0x4f9:0x1eb,TYPE:1,1,RE:0x83,WE:0x4 CM:,,
MODEL:"DCP-7030",ID:0x4f9:0x1ea,TYPE:2,2,RE:0x83,WE:0x4 CM:,,
MODEL:"DCP-7040",ID:0x4f9:0x1e9,TYPE:1,2,RE:0x83,WE:0x4 CM:,,
MODEL:"DCP-7045N",ID:0x4f9:0x1e8,TYPE:1,2,RE:0x83,WE:0x4 CM:,,
MODEL:"MFC-7340",ID:0x4f9:0x1e7,TYPE:1,1,RE:0x83,WE:0x4 CM:,,
MODEL:"MFC-7440N",ID:0x4f9:0x1e6,TYPE:1,1,RE:0x83,WE:0x4 CM:,,
MODEL:"MFC-7840W",ID:0x4f9:0x1e5,TYPE:1,1,RE:0x83,WE:0x4 CM:,,
MODEL:,ID:0x4f9:0xffff,TYPE:35,65535,RE:0xffff,WE:0xffff CM:,,
MODEL:"DCP-8080DN",ID:0x4f9:0x218,TYPE:17,1,RE:0x85,WE:0x4 CM:,,
MODEL:"DCP-8085DN",ID:0x4f9:0x21f,TYPE:17,1,RE:0x85,WE:0x4 CM:,,
MODEL:"MFC-8480DN",ID:0x4f9:0x217,TYPE:17,1,RE:0x85,WE:0x4 CM:,,
MODEL:"MFC-8890DW",ID:0x4f9:0x215,TYPE:17,1,RE:0x85,WE:0x4 CM:,,
-----------------------------
0 "DCP-195C"
1 "DCP-365CN"
2 "DCP-375CW"
3 "DCP-395CN"
4 "MFC-295CN"
5 "MFC-495CW"
6 "MFC-795CW"
7 "MFC-255CW"
8 "DCP-390CN"
9 "DCP-595CN"
10 "MFC-495CN"
11 "MFC-675CD"
12 "MFC-695CDN"
13 "MFC-735CD"
14 "MFC-935CDN"
15 "DCP-8070D"
16 "MFC-8370DN"
17 "MFC-8380DN"
18 "MFC-8680DN"
19 "MFC-8880DN"
20 "MFC-9120CN"
21 "MFC-9320CW"
22 "MFC-9010CN"
23 "DCP-9010CN"
24 "DCP-197C"
25 "DCP-377CW"
26 "MFC-257CW"
27 "DCP-145C"
28 "DCP-165C"
29 "DCP-185C"
30 "DCP-385C"
31 "DCP-585CW"
32 "DCP-535CN"
33 "MFC-250C"
34 "MFC-290C"
35 "MFC-490CW"
36 "MFC-490CN"
37 "MFC-790CW"
38 "MFC-990CW"
39 "MFC-670CD"
40 "MFC-930CDN"
41 "MFC-5490CN"
42 "MFC-5890CN"
43 "DCP-6690CW"
44 "MFC-6490CW"
45 "MFC-6490CN"
46 "MFC-6890CDW"
47 "MFC-6890CN"
48 "DCP-163C"
49 "DCP-167C"
50 "DCP-383C"
51 "DCP-387C"
52 "MFC-297C"
53 "MFC-7450"
54 "MFC-7840N"
55 "MFC-7320"
56 "DCP-7030"
57 "DCP-7040"
58 "DCP-7045N"
59 "MFC-7340"
60 "MFC-7440N"
61 "MFC-7840W"
62
63 "DCP-8080DN"
64 "DCP-8085DN"
65 "MFC-8480DN"
66 "MFC-8890DW"
Devices on network
ping
------- cat /usr/local/Brother/sane/brscan-skey-0.2.1-3.cfg-------
password=
IMAGE="sh /usr/local/Brother/sane/script/scantoimage-0.2.1-3.sh"
OCR="sh /usr/local/Brother/sane/script/scantoocr-0.2.1-3.sh"
EMAIL="sh /usr/local/Brother/sane/script/scantoemail-0.2.1-3.sh"
FILE="sh /usr/local/Brother/sane/script/scantofile-0.2.1-3.sh"
SEMID=b
0x01ea,2,2,"DCP-7030",131,4
Dernière modification par Bionet (Le 05/05/2010, à 23:22)
Hors ligne
#16 Le 06/05/2010, à 09:07
- fabux
Re : Je ne peux plus scanner sous ubuntu 10.4
Si tu arrives à scanner en root, à mon avis, à mon avis c'est soit la règle qui n'est pas passée soit tu n'appartiens pas à un groupe
cat /lib/udev/rules.d/40-libsane.rules
id
cat /etc/group
May linux be with you
Comment poster un message.
Je me présente dans la doc
Hors ligne
#17 Le 06/05/2010, à 18:10
- La_Lixorne
Re : Je ne peux plus scanner sous ubuntu 10.4
Salut,
J'ai le même soucis avec une multifonction b109 de chez HP.
J'ai désinstallé/réinstallé HPLIP mais le scanner reste définitivement introuvable.Il se passe certainement quelque chose lors de la mise à niveau vers 10.04 mais quoi?
Si quelqu'un pouvais nous aider ce serait vraiment sympa.
Merci
Bonsoir, j'ai le même souci que Fretz avec mon HP b109.
Le problème semble résolu pour la Brother mais qu'en est-il des HP multifonctions ? L'impression marche mais pas le scanner qui lui fonctionnait avec Xsane... mais même Xsane ne veut plus fonctionner maintenant !!!
Bug ou pas bug ?
Quelqu'un peut nous aider ?
Merci par avance,
Cordialement,
Amicalement,
Val' La_Lixorne
(Une Licorne sur la Banquise, avec Ubuntu Lucid Lynx sur PC ACER)
Hors ligne
#18 Le 07/05/2010, à 14:35
- fabux
Re : Je ne peux plus scanner sous ubuntu 10.4
Xsane plante avec un message ou rien ne se passe? retour au prompt? (avec ou sans gksudo xsane). Que dis un autre logiciel de scan (simple scan, gimp...)
ls /etc/sane.d
cat /etc/sane.d/dll.conf
May linux be with you
Comment poster un message.
Je me présente dans la doc
Hors ligne
#19 Le 07/05/2010, à 19:54
- Bionet
Re : Je ne peux plus scanner sous ubuntu 10.4
Bonjour,
Je crée un autre post pour résoudre le problème de lancement en root d'un scanner Brother pour éviter de polluer ce fil qui s'est finalement axé plutôt sur la reconnaissance du scanner par le système (pour ma part, le scanner est reconnu mais ne fonctionne qu'avec "gksudo xsane") :
http://forum.ubuntu-fr.org/viewtopic.php?id=395157
Bien cordialement,
bionet
Dernière modification par Bionet (Le 07/05/2010, à 20:16)
Hors ligne
#20 Le 08/05/2010, à 12:31
- La_Lixorne
Re : Je ne peux plus scanner sous ubuntu 10.4
Xsane plante avec un message ou rien ne se passe? retour au prompt? (avec ou sans gksudo xsane). Que dis un autre logiciel de scan (simple scan, gimp...)
ls /etc/sane.d cat /etc/sane.d/dll.conf
Bonjour Fabux,
La commande ls /etc/sane.d donne :
valou@valou-desktop:~$ ls /etc/sane.d
abaton.conf dll.conf lexmark.conf sceptre.conf
agfafocus.conf dll.conf.dpkg-old ma1509.conf sharp.conf
apple.conf dll.d matsushita.conf sm3840.conf
artec.conf dmc.conf microtek2.conf snapscan.conf
artec_eplus48u.conf epjitsu.conf microtek.conf sp15c.conf
avision.conf epson2.conf mustek.conf st400.conf
bh.conf epson.conf mustek_pp.conf stv680.conf
canon630u.conf fujitsu.conf mustek_usb.conf tamarack.conf
canon.conf genesys.conf nec.conf teco1.conf
canon_dr.conf gphoto2.conf net.conf teco2.conf
canon_pp.conf gt68xx.conf pie.conf teco3.conf
cardscan.conf hp3900.conf pixma.conf test.conf
coolscan2.conf hp4200.conf plustek.conf u12.conf
coolscan3.conf hp5400.conf plustek_pp.conf umax1220u.conf
coolscan.conf hp.conf qcam.conf umax.conf
dc210.conf hpsj5s.conf ricoh.conf umax_pp.conf
dc240.conf hs2p.conf rts8891.conf v4l.conf
dc25.conf ibm.conf s9036.conf xerox_mfp.conf
dell1600n_net.conf leo.conf saned.conf
la commande : cat /etc/sane.d/dll.conf donne :
# /etc/sane.d/dll.conf - Configuration file for the SANE dynamic backend loader
#
# Backends can also be enabled by configuration snippets under
# /etc/sane.d/dll.d directory -- packages providing backends should drop
# a config file similar to dll.conf in this directory, named after the package.
#
# The next line enables the network backend; comment it out if you don't need
# to use a remote SANE scanner over the network - see sane-net(5) and saned(8)
net
abaton
agfafocus
apple
avision
artec
artec_eplus48u
as6e
bh
canon
canon630u
canon_dr
#canon_pp
cardscan
coolscan
#coolscan2
coolscan3
#dc25
#dc210
#dc240
dell1600n_net
dmc
epjitsu
#epson
epson2
fujitsu
#gphoto2
genesys
gt68xx
hp
hp3900
hpsj5s
hp3500
hp4200
hp5400
hp5590
hpljm1005
hs2p
ibm
leo
lexmark
ma1509
matsushita
microtek
microtek2
mustek
#mustek_pp
mustek_usb
mustek_usb2
nec
niash
pie
pixma
plustek
#plustek_pp
#pnm
qcam
ricoh
rts8891
s9036
sceptre
sharp
sm3600
sm3840
snapscan
sp15c
#st400
#stv680
tamarack
teco1
teco2
teco3
#test
u12
umax
#umax_pp
umax1220u
v4l
xerox_mfp
Autant dire que ça ne me parle pas des masses !
Simple Scan me demande de brancher mon scanner : c'est fait depuis longtemps !
Xsane me répond qu'il n'y a pas de driver !
J'ai désinstallé puis réinstallé, via Synaptic, tous les HPlip... en vain !
Je ne sais plus quoi faire ! Help !!! Merci beaucoup !
Dernière modification par La_Lixorne (Le 08/05/2010, à 12:32)
Amicalement,
Val' La_Lixorne
(Une Licorne sur la Banquise, avec Ubuntu Lucid Lynx sur PC ACER)
Hors ligne
#21 Le 08/05/2010, à 12:45
- Fretz
Re : Je ne peux plus scanner sous ubuntu 10.4
Donc pour moi la commande ls /etc/sane.d donne :
abaton.conf dll.conf ma1509.conf sharp.conf
agfafocus.conf dll.d matsushita.conf sm3840.conf
apple.conf dmc.conf microtek2.conf snapscan.conf
artec.conf epjitsu.conf microtek.conf sp15c.conf
artec_eplus48u.conf epson2.conf mustek.conf st400.conf
avision.conf epson.conf mustek_pp.conf stv680.conf
bh.conf fujitsu.conf mustek_usb.conf tamarack.conf
canon630u.conf genesys.conf nec.conf teco1.conf
canon.conf gphoto2.conf net.conf teco2.conf
canon_dr.conf gt68xx.conf pie.conf teco3.conf
canon_pp.conf hp3900.conf pixma.conf test.conf
cardscan.conf hp4200.conf plustek.conf u12.conf
coolscan2.conf hp5400.conf plustek_pp.conf umax1220u.conf
coolscan3.conf hp.conf qcam.conf umax.conf
coolscan.conf hpsj5s.conf ricoh.conf umax_pp.conf
dc210.conf hs2p.conf rts8891.conf v4l.conf
dc240.conf ibm.conf s9036.conf xerox_mfp.conf
dc25.conf leo.conf saned.conf
dell1600n_net.conf lexmark.conf sceptre.conf
et la commande cat /etc/sane.d/dll.conf donne :
# /etc/sane.d/dll.conf - Configuration file for the SANE dynamic backend loader
#
# Backends can also be enabled by configuration snippets under
# /etc/sane.d/dll.d directory -- packages providing backends should drop
# a config file similar to dll.conf in this directory, named after the package.
## The next line enables the network backend; comment it out if you don't need
# to use a remote SANE scanner over the network - see sane-net(5) and saned(8)
net
abaton
agfafocus
apple
avision
artec
artec_eplus48u
as6e
bh
canon
canon630u
canon_dr
#canon_pp
cardscan
coolscan
#coolscan2
coolscan3
#dc25
#dc210
#dc240
dell1600n_net
dmc
epjitsu
#epson
epson2
fujitsu
#gphoto2
genesys
gt68xx
hp
hp3900
hpsj5s
hp3500
hp4200
hp5400
hp5590
hpljm1005
hs2p
ibm
leo
lexmark
ma1509
matsushita
microtek
microtek2
mustek
#mustek_pp
mustek_usb
mustek_usb2
nec
niash
pie
pixma
plustek
#plustek_pp
#pnm
qcam
ricoh
rts8891
s9036
sceptre
sharp
sm3600
sm3840
snapscan
sp15c
#st400
#stv680
tamarack
teco1
teco2
teco3
#test
u12
umax
#umax_pp
umax1220u
v4l
xerox_mfp
Chez moi, Simple Scan me dit "Aucun scanneur n'a été détecté Veuillez vérifier que votre scanneur est connecté et sous tension" et xsane me dit "no devices available"
Par-contre, j'ai encore un vieux scanner agfa, quand je le branche, lui fonctionne du premier coup, sans aucun soucis.
A noter aussi que j'ai fait une nouvelle installations d'ubuntu 10.04 et que rien n'a changé. L'impression fonctionne très bien, Le scanner sous windows également y'a que sous ubuntu qu'il ne veut pas démarrer
Hors ligne
#22 Le 08/05/2010, à 13:55
- fabux
Re : Je ne peux plus scanner sous ubuntu 10.4
Pas trop fouillé mais je ne sais pas si il y a un fichier pour les Photosmart. Mais en attendnat, vous pouvez essayer d'ajouter hpb109 dans /etc/sane.d/dll.conf et/ou l'ajouter dans hp.conf (peut-être même décommenter dans ce fichier la ligne /dev/usb/scanner0). Redémarrer ensuite (un redémarrage de service devrait marcher mais je ne sais pas lequel, ou alors juste une relance de X mais pas sûr non plus).
May linux be with you
Comment poster un message.
Je me présente dans la doc
Hors ligne
#23 Le 08/05/2010, à 22:17
- Barrin
Re : Je ne peux plus scanner sous ubuntu 10.4
C'est super merci pour votre aide. en réinstallant brscan fourni par brother j'ai résolu le problème. (désolé pour le retard de la réponse j'étais parti en voyage pour le boulot).
Hors ligne
#24 Le 09/05/2010, à 14:34
- Fretz
Re : Je ne peux plus scanner sous ubuntu 10.4
Pas trop fouillé mais je ne sais pas si il y a un fichier pour les Photosmart. Mais en attendnat, vous pouvez essayer d'ajouter hpb109 dans /etc/sane.d/dll.conf et/ou l'ajouter dans hp.conf (peut-être même décommenter dans ce fichier la ligne /dev/usb/scanner0). Redémarrer ensuite (un redémarrage de service devrait marcher mais je ne sais pas lequel, ou alors juste une relance de X mais pas sûr non plus).
Voilà c'est fait, mais ça ne change rien... Pfff c'est désespérant tout ça...
Bon voilà donc les modifs que j'ai faites, j'espère que c'est juste:
# /etc/sane.d/dll.conf - Configuration file for the SANE dynamic backend loader
#
# Backends can also be enabled by configuration snippets under
# /etc/sane.d/dll.d directory -- packages providing backends should drop
# a config file similar to dll.conf in this directory, named after the package.
#
# The next line enables the network backend; comment it out if you don't need
# to use a remote SANE scanner over the network - see sane-net(5) and saned(8)
net
abaton
agfafocus
apple
avision
artec
artec_eplus48u
as6e
bh
canon
canon630u
canon_dr
#canon_pp
cardscan
coolscan
#coolscan2
coolscan3
#dc25
#dc210
#dc240
dell1600n_net
dmc
epjitsu
#epson
epson2
fujitsu
#gphoto2
genesys
gt68xx
hp
hpb109
hp3900
hpsj5s
hp3500
hp4200
hp5400
hp5590
hpljm1005
hs2p
ibm
leo
lexmark
ma1509
matsushita
microtek
microtek2
mustek
#mustek_pp
mustek_usb
mustek_usb2
nec
niash
pie
pixma
plustek
#plustek_pp
#pnm
qcam
ricoh
rts8891
s9036
sceptre
sharp
sm3600
sm3840
snapscan
sp15c
#st400
#stv680
tamarack
teco1
teco2
teco3
#test
u12
umax
#umax_pp
umax1220u
v4l
xerox_mfp
et
scsi HP
# Uncomment the following if you have "Error during device I/O" on SCSI
# option dumb-read
#
# The usual place for a SCSI-scanner on Linux
/dev/scanner
#
# USB-scanners supported by the hp-backend
# HP ScanJet 4100C
usb 0x03f0 0x0101
# HP ScanJet 5200C
usb 0x03f0 0x0401
# HP ScanJet 62X0C
usb 0x03f0 0x0201
# HP ScanJet 63X0C
usb 0x03f0 0x0601
#
# Uncomment the following if your scanner is connected by USB,
# but you are not using libusb
# option connect-device
Ne devrait-il pas y avoir de fichier hplip.conf ou hpb109.conf dans le dossier sane.d ?
Hors ligne
#25 Le 09/05/2010, à 15:09
- miroune73
Re : Je ne peux plus scanner sous ubuntu 10.4
+1, j'ai moi aussi le probleme du "No devices available" lorsque je lance xsane avec ma HP c6380 multifonction.
Sous 9.10, je n'ai jamais eu besoin de taper quoi que ce soit avec le terminal...mais ce n'est plus la même sous 10.04 !
n'y aurait-il pas un "bug" à déclarer sous launchpad pour regler notre probleme ?
- PC de bureau sous 20.04 LTS
- Netbook ASUS 1201PN sous Ubuntu Netbook Edition 10.04 (Licence Windows 7 remboursée par ASUS)
- Netbook SONY VAIO PCG-4V1M sous Xubuntu 14.04 LTS The Trusty Tahr
Hors ligne