#1 Le 22/05/2010, à 10:32
- netchaiev
[résolu] Pas de détection CPU I5-750 avec Lm-sensors
Salut à tous,
L'installation de Lm-sensors me pose des problèmes depuis l'acquisition de ma nouvelle machine.
Carte mère : MSI P55-GD65
Processeur : Intel I5-750
OS : Ubuntu 10.04
J'ai suivi plusieurs fois le tuto sur lm-sensors et je n'arrive pas à avoir les infos sur ma carte mère ni du processeurs.
LA commande sensors-detect me donne les résultats suivants :
sensors-detect
# sensors-detect revision 5818 (2010-01-18 17:22:07 +0100)
# System: MICRO-STAR INTERNATIONAL CO.,LTD MS-7583
# Board: MICRO-STAR INTERNATIONAL CO.,LTD P55-GD65 (MS-7583)
This program will help you determine which kernel modules you need
to load to use lm_sensors most effectively. It is generally safe
and recommended to accept the default answers to all questions,
unless you know what you're doing.
Some south bridges, CPUs or memory controllers contain embedded sensors.
Do you want to scan for them? This is totally safe. (YES/no): y
Silicon Integrated Systems SIS5595... No
VIA VT82C686 Integrated Sensors... No
VIA VT8231 Integrated Sensors... No
AMD K8 thermal sensors... No
AMD Family 10h thermal sensors... No
AMD Family 11h thermal sensors... No
Intel Core family thermal sensor... No
Intel Atom thermal sensor... No
Intel AMB FB-DIMM thermal sensor... No
VIA C7 thermal sensor... No
VIA Nano thermal sensor... No
Some Super I/O chips contain embedded sensors. We have to write to
standard I/O ports to probe them. This is usually safe.
Do you want to scan for Super I/O sensors? (YES/no): y
Probing for Super-I/O at 0x2e/0x2f
Trying family `National Semiconductor'... No
Trying family `SMSC'... No
Trying family `VIA/Winbond/Nuvoton/Fintek'... No
Trying family `ITE'... No
Probing for Super-I/O at 0x4e/0x4f
Trying family `National Semiconductor'... No
Trying family `SMSC'... No
Trying family `VIA/Winbond/Nuvoton/Fintek'... Yes
Found `Fintek F71889FG Super IO Sensors' Success!
(address 0xa00, driver `f71882fg')
Some systems (mainly servers) implement IPMI, a set of common interfaces
through which system health data may be retrieved, amongst other things.
We first try to get the information from SMBIOS. If we don't find it
there, we have to read from arbitrary I/O ports to probe for such
interfaces. This is normally safe. Do you want to scan for IPMI
interfaces? (YES/no): y
Probing for `IPMI BMC KCS' at 0xca0... No
Probing for `IPMI BMC SMIC' at 0xca8... No
Some hardware monitoring chips are accessible through the ISA I/O ports.
We have to write to arbitrary I/O ports to probe them. This is usually
safe though. Yes, you do have ISA I/O ports even if you do not have any
ISA slots! Do you want to scan the ISA I/O ports? (yes/NO): y
Probing for `National Semiconductor LM78' at 0x290... No
Probing for `National Semiconductor LM79' at 0x290... No
Probing for `Winbond W83781D' at 0x290... No
Probing for `Winbond W83782D' at 0x290... No
Lastly, we can probe the I2C/SMBus adapters for connected hardware
monitoring devices. This is the most risky part, and while it works
reasonably well on most systems, it has been reported to cause trouble
on some systems.
Do you want to probe the I2C/SMBus adapters now? (YES/no): y
Found unknown SMBus adapter 8086:3b30 at 0000:00:1f.3.
Sorry, no supported PCI bus adapters found.
Module i2c-dev loaded successfully.
Next adapter: NVIDIA i2c adapter (i2c-0)
Do you want to scan it? (YES/no/selectively): y
Client found at address 0x49
Probing for `National Semiconductor LM75'... No
Probing for `Dallas Semiconductor DS75'... No
Probing for `National Semiconductor LM77'... No
Probing for `Dallas Semiconductor DS1621/DS1631'... No
Probing for `National Semiconductor LM73'... No
Probing for `National Semiconductor LM92'... No
Probing for `National Semiconductor LM76'... No
Probing for `Maxim MAX6633/MAX6634/MAX6635'... No
Client found at address 0x50
Probing for `Analog Devices ADM1033'... No
Probing for `Analog Devices ADM1034'... No
Probing for `SPD EEPROM'... No
Probing for `EDID EEPROM'... Yes
(confidence 8, not a hardware monitoring chip)
Next adapter: NVIDIA i2c adapter (i2c-1)
Do you want to scan it? (YES/no/selectively): y
Next adapter: NVIDIA i2c adapter (i2c-2)
Do you want to scan it? (YES/no/selectively): y
Next adapter: NVIDIA i2c adapter (i2c-3)
Do you want to scan it? (YES/no/selectively): y
Next adapter: NVIDIA i2c adapter (i2c-4)
Do you want to scan it? (YES/no/selectively): y
Next adapter: NVIDIA i2c adapter (i2c-5)
Do you want to scan it? (YES/no/selectively): y
Next adapter: NVIDIA i2c adapter (i2c-6)
Do you want to scan it? (YES/no/selectively): y
Next adapter: NVIDIA i2c adapter (i2c-7)
Do you want to scan it? (YES/no/selectively): y
Now follows a summary of the probes I have just done.
Just press ENTER to continue: y
Driver `f71882fg':
* ISA bus, address 0xa00
Chip `Fintek F71889FG Super IO Sensors' (confidence: 9)
To load everything that is needed, add this to /etc/modules:
#----cut here----
# Chip drivers
f71882fg
#----cut here----
If you have some drivers built into your kernel, the list above will
contain too many modules. Skip the appropriate ones!
Do you want to add these lines automatically to /etc/modules? (yes/NO)y
Successful!
Monitoring programs won't work until the needed modules are
loaded. You may want to run '/etc/init.d/module-init-tools start'
to load them.
Unloading i2c-dev... OKA la suite la commande sensors donne cela
sensors
No sensors found!
Make sure you loaded all the kernel drivers you need.
Try sensors-detect to find out which these are.JE me demande si ma carte mère et mon processeurs sont bien reconnus. Auriez vous une idée pour m'aider.
Merci à tous par avance
Dernière modification par netchaiev (Le 26/05/2010, à 15:09)
CM : MSI P55-GD65 ; 8 G° de Ram ; Processeur : Intel I5 750
Carte son : intégrée à la CM. Du 7.1
Carte graphique : Geforce GT730
Ubuntu 23.10 64 bits
Hors ligne
#2 Le 22/05/2010, à 15:17
- netchaiev
Re : [résolu] Pas de détection CPU I5-750 avec Lm-sensors
A priori, je comprends qu'il me manque des drivers, mais je n'arrive pas trouver lesquels ni où je peux les télécharger.
En ce samedi après midi ensoleillé, y' a personne qui connait lm-sensors sur le bout des doigts ????
Bon samedi
CM : MSI P55-GD65 ; 8 G° de Ram ; Processeur : Intel I5 750
Carte son : intégrée à la CM. Du 7.1
Carte graphique : Geforce GT730
Ubuntu 23.10 64 bits
Hors ligne
#3 Le 23/05/2010, à 12:16
- netchaiev
Re : [résolu] Pas de détection CPU I5-750 avec Lm-sensors
:(:(
'y a vraiment personne qu'à une idée ???
CM : MSI P55-GD65 ; 8 G° de Ram ; Processeur : Intel I5 750
Carte son : intégrée à la CM. Du 7.1
Carte graphique : Geforce GT730
Ubuntu 23.10 64 bits
Hors ligne
#4 Le 26/05/2010, à 15:08
- netchaiev
Re : [résolu] Pas de détection CPU I5-750 avec Lm-sensors
Salut SuperDude,
Excuse-moi de n'avoir pas répondu plus tôt, mais je n'étais pas devant mon ordi depuis tout ce temps.
Je te remercie de ton aide et effectivement cela fonctionne parfaitement. Néanmoins, je n'arrive toujours pas à avoir la température de ma carte mère et le mouvement des ventilos, mais cela n'est pas grave.
Un grand merci
Bonne semaine.
CM : MSI P55-GD65 ; 8 G° de Ram ; Processeur : Intel I5 750
Carte son : intégrée à la CM. Du 7.1
Carte graphique : Geforce GT730
Ubuntu 23.10 64 bits
Hors ligne
#5 Le 06/01/2011, à 12:00
- yorenwan
Re : [résolu] Pas de détection CPU I5-750 avec Lm-sensors
Bonjour, désolé de déterrer mais la solution de SuperDude n'est plus affichée, j'ai le même probleme...
Voici le résultat de ma commande sensors :
atk0110-acpi-0
Adapter: ACPI interface
+3.3 Voltage: +3.34 V (min = +2.97 V, max = +3.63 V)
+5 Voltage: +5.09 V (min = +4.50 V, max = +5.50 V)
+12 Voltage: +12.14 V (min = +10.20 V, max = +13.80 V)
DRAM Voltage: +1.61 V (min = +1.40 V, max = +1.90 V)
CPU Vcore Voltage: +0.86 V (min = +0.80 V, max = +2.50 V)
CPU PLL Voltage: +1.80 V (min = +1.20 V, max = +3.01 V)
VTT CPU Voltage: +1.12 V (min = +0.80 V, max = +2.00 V)
DRAM Voltage: +1.06 V (min = +1.00 V, max = +1.30 V)
DRAM Voltage: +1.51 V (min = +1.80 V, max = +3.40 V)
DRAM Voltage: +1.80 V (min = +1.80 V, max = +3.40 V)
DRAM Termination Voltage: +0.79 V (min = +0.60 V, max = +1.30 V)
CPU FAN Speed: 0 RPM (min = 600 RPM)
CHA_FAN1 Speed: 0 RPM (min = 600 RPM)
CHA_FAN2 Speed: 0 RPM (min = 600 RPM)
OPT_FAN1 Speed: 0 RPM (min = 600 RPM)
OPT_FAN2 Speed: 0 RPM (min = 600 RPM)
CPU Temperature: +55.0°C (high = +60.0°C, crit = +65.0°C)
MB Temperature: +38.0°C (high = +45.0°C, crit = +55.0°C)
PCH Temperature: +48.0°C (high = +65.0°C, crit = +95.0°C)
POWER Temperature: +32.0°C (high = +55.0°C, crit = +95.0°C)
OPT_TEMP1 Temperature: +0.0°C (high = +45.0°C, crit = +45.0°C)
OPT_TEMP2 Temperature: +0.0°C (high = +45.0°C, crit = +45.0°C) Je n'arrive pas a avoir la température pour chaque core alors que sur windoz avec HWMonitor je l'ai...
Merci de votre aide 
Dernière modification par yorenwan (Le 06/01/2011, à 12:06)
Hors ligne
#6 Le 06/02/2011, à 04:54
- reaktor
Re : [résolu] Pas de détection CPU I5-750 avec Lm-sensors
Use the coretemp module.
sudo modprobe coretempstmiller@brahms:~$ sensors
coretemp-isa-0000
Adapter: ISA adapter
Core 0: +31.0°C (high = +84.0°C, crit = +100.0°C)
coretemp-isa-0001
Adapter: ISA adapter
Core 1: +30.0°C (high = +84.0°C, crit = +100.0°C)
coretemp-isa-0002
Adapter: ISA adapter
Core 2: +34.0°C (high = +84.0°C, crit = +100.0°C)
coretemp-isa-0003
Adapter: ISA adapter
Core 3: +29.0°C (high = +84.0°C, crit = +100.0°C)
Hors ligne