Contenu | Rechercher | Menus

Annonce

Si vous avez des soucis pour rester connecté, déconnectez-vous puis reconnectez-vous depuis ce lien en cochant la case
Me connecter automatiquement lors de mes prochaines visites.

À propos de l'équipe du forum.

#1 Le 13/06/2010, à 18:49

alfabio

[soluce] ath5k, wifi lent, AR5001 et ath5k phy0: unsupported jumbo

Bonjour,

J'ai installer la dernière version de ubuntu pour notebook (ubuntu netbook edition 10.04) en remplacement du windows xp fournit avec et j'ai de gros probleme pour me connecter via le wifi.


J'ai réussi a me connecter seulement 5 minutes avec une vitesse extrêmement faible et depuis je n'y arrive plus.


Si quelqu'un a déjà eu un souci wifi avec cette version de ubuntu, ce serait sympas de m'aider.

Voici les infos de mon pc :

To run a command as administrator (user "root"), use "sudo <command>".
See "man sudo_root" for details.

alfabio@alfabio-PC:~$ cat /etc/lsb-release
DISTRIB_ID=Ubuntu
DISTRIB_RELEASE=10.04
DISTRIB_CODENAME=lucid
DISTRIB_DESCRIPTION="Ubuntu 10.04 LTS"
alfabio@alfabio-PC:~$ lsusb
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 002: ID 04f2:b071 Chicony Electronics Co., Ltd 2.0M UVC Webcam / CNF7129
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub




alfabio@alfabio-PC:~$ lspci
00:00.0 Host bridge: Intel Corporation Mobile 915GM/PM/GMS/910GML Express Processor to DRAM Controller (rev 04)
00:02.0 VGA compatible controller: Intel Corporation Mobile 915GM/GMS/910GML Express Graphics Controller (rev 04)
00:02.1 Display controller: Intel Corporation Mobile 915GM/GMS/910GML Express Graphics Controller (rev 04)
00:1b.0 Audio device: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) High Definition Audio Controller (rev 04)
00:1c.0 PCI bridge: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) PCI Express Port 1 (rev 04)
00:1c.1 PCI bridge: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) PCI Express Port 2 (rev 04)
00:1c.3 PCI bridge: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) PCI Express Port 4 (rev 04)
00:1d.0 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #1 (rev 04)
00:1d.1 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #2 (rev 04)
00:1d.2 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #3 (rev 04)
00:1d.3 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #4 (rev 04)
00:1d.7 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB2 EHCI Controller (rev 04)
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev d4)
00:1f.0 ISA bridge: Intel Corporation 82801FBM (ICH6M) LPC Interface Bridge (rev 04)
00:1f.2 IDE interface: Intel Corporation 82801FBM (ICH6M) SATA Controller (rev 04)
00:1f.3 SMBus: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) SMBus Controller (rev 04)
01:00.0 Ethernet controller: Atheros Communications Inc. AR5001 Wireless Network Adapter (rev 01)
03:00.0 Ethernet controller: Atheros Communications Atheros AR8121/AR8113/AR8114 PCI-E Ethernet Controller (rev b0)




alfabio@alfabio-PC:~$ lspci -nn | grep -i net
01:00.0 Ethernet controller [0200]: Atheros Communications Inc. AR5001 Wireless Network Adapter [168c:001c] (rev 01)
03:00.0 Ethernet controller [0200]: Atheros Communications Atheros AR8121/AR8113/AR8114 PCI-E Ethernet Controller [1969:1026] (rev b0)




alfabio@alfabio-PC:~$ sudo lshw -C network
[sudo] password for alfabio:
  *-network               
       description: Ethernet interface
       product: Atheros AR8121/AR8113/AR8114 PCI-E Ethernet Controller
       vendor: Atheros Communications
       physical id: 0
       bus info: pci@0000:03:00.0
       logical name: eth0
       version: b0
       serial: e0:cb:4e:5d:d1:d0
       capacity: 100MB/s
       width: 64 bits
       clock: 33MHz
       capabilities: pm msi pciexpress vpd bus_master cap_list ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd autonegotiation
       configuration: autonegotiation=on broadcast=yes driver=ATL1E driverversion=1.0.0.7-NAPI firmware=L1e latency=0 link=no multicast=yes port=twisted pair
       resources: irq:27 memory:fbfc0000-fbffffff ioport:ec00(size=128)
  *-network
       description: Wireless interface
       product: AR5001 Wireless Network Adapter
       vendor: Atheros Communications Inc.
       physical id: 0
       bus info: pci@0000:01:00.0
       logical name: wlan0
       version: 01
       serial: 00:25:d3:92:f0:7e
       width: 64 bits
       clock: 33MHz
       capabilities: pm msi pciexpress msix bus_master cap_list ethernet physical wireless
       configuration: broadcast=yes driver=ath5k latency=0 multicast=yes wireless=IEEE 802.11bg
       resources: irq:19 memory:fbef0000-fbefffff




alfabio@alfabio-PC:~$ lsmod
Module                  Size  Used by
binfmt_misc             6587  1
ppdev                   5259  0
snd_hda_codec_realtek   203168  1
fbcon                  35102  71
tileblit                2031  1 fbcon
font                    7557  1 fbcon
bitblit                 4707  1 fbcon
softcursor              1189  1 bitblit
vga16fb                11385  0
vgastate                8961  1 vga16fb
arc4                    1153  2
snd_hda_intel          21877  2
snd_hda_codec          74201  2 snd_hda_codec_realtek,snd_hda_intel
snd_hwdep               5412  1 snd_hda_codec
snd_pcm_oss            35308  0
snd_mixer_oss          13746  1 snd_pcm_oss
snd_pcm                70662  3 snd_hda_intel,snd_hda_codec,snd_pcm_oss
snd_seq_dummy           1338  0
snd_seq_oss            26726  0
snd_seq_midi            4557  0
joydev                  8708  0
snd_rawmidi            19056  1 snd_seq_midi
snd_seq_midi_event      6003  2 snd_seq_oss,snd_seq_midi
snd_seq                47263  6 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_seq_midi_event
snd_timer              19098  2 snd_pcm,snd_seq
snd_seq_device          5700  5 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_rawmidi,snd_seq
ath5k                 121792  0
i915                  282354  4
mac80211              204922  1 ath5k
snd                    54148  16 snd_hda_codec_realtek,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_seq_oss,snd_rawmidi,snd_seq,snd_timer,snd_seq_device
drm_kms_helper         29297  1 i915
ath                     7611  1 ath5k
uvcvideo               56990  0
drm                   162471  5 i915,drm_kms_helper
cfg80211              126485  3 ath5k,mac80211,ath
psmouse                63245  0
videodev               34361  1 uvcvideo
soundcore               6620  1 snd
i2c_algo_bit            5028  1 i915
intel_agp              24177  2 i915
v4l1_compat            13251  2 uvcvideo,videodev
serio_raw               3978  0
led_class               2864  1 ath5k
snd_page_alloc          7076  2 snd_hda_intel,snd_pcm
video                  17375  1 i915
agpgart                31724  2 drm,intel_agp
output                  1871  1 video
eeepc_laptop           12847  0
lp                      7028  0
parport                32635  2 ppdev,lp
atl1e                  28018  0




alfabio@alfabio-PC:~$ iwconfig
lo        no wireless extensions.

eth0      no wireless extensions.

wlan0     IEEE 802.11bg  ESSID:"alfabio" 
          Mode:Managed  Frequency:2.437 GHz  Access Point: Not-Associated   
          Tx-Power=20 dBm   
          Retry  long limit:7   RTS thr:off   Fragment thr:off
          Power Management:off
         




alfabio@alfabio-PC:~$ ifconfig
eth0      Link encap:Ethernet  HWaddr e0:cb:4e:5d:d1:d0 
          UP BROADCAST MULTICAST  MTU:1500  Metric:1
          Packets reçus:0 erreurs:0 :0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:1
          collisions:0 lg file transmission:1000
          Octets reçus:0 (0.0 B) Octets transmis:0 (0.0 B)
          Interruption:27

lo        Link encap:Boucle locale 
          inet adr:127.0.0.1  Masque:255.0.0.0
          adr inet6: ::1/128 Scope:Hôte
          UP LOOPBACK RUNNING  MTU:16436  Metric:1
          Packets reçus:210 erreurs:0 :0 overruns:0 frame:0
          TX packets:210 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 lg file transmission:0
          Octets reçus:17022 (17.0 KB) Octets transmis:17022 (17.0 KB)

wlan0     Link encap:Ethernet  HWaddr 00:25:d3:92:f0:7e 
          adr inet6: fe80::225:d3ff:fe92:f07e/64 Scope:Lien
          UP BROADCAST MULTICAST  MTU:1500  Metric:1
          Packets reçus:1144 erreurs:0 :0 overruns:0 frame:0
          TX packets:1441 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 lg file transmission:1000
          Octets reçus:564082 (564.0 KB) Octets transmis:213082 (213.0 KB)





alfabio@alfabio-PC:~$ sudo iwlist scan
lo        Interface doesn't support scanning.

eth0      Interface doesn't support scanning.

wlan0     Scan completed :
          Cell 01 - Address: 00:07:CB:72:C9:0B
                    Channel:1
                    Frequency:2.412 GHz (Channel 1)
                    Quality=23/70  Signal level=-87 dBm 
                    Encryption key:on
                    ESSID:"freeboxdav"
                    Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 11 Mb/s; 18 Mb/s
                              24 Mb/s; 36 Mb/s; 54 Mb/s
                    Bit Rates:6 Mb/s; 9 Mb/s; 12 Mb/s; 48 Mb/s
                    Mode:Master
                    Extra:tsf=0000023ace0b31cb
                    Extra: Last beacon: 1400ms ago
                    IE: Unknown: 000A66726565626F78646176
                    IE: Unknown: 010882848B962430486C
                    IE: Unknown: 030101
                    IE: Unknown: 2A0100
                    IE: Unknown: 2F0100
                    IE: IEEE 802.11i/WPA2 Version 1
                        Group Cipher : TKIP
                        Pairwise Ciphers (2) : CCMP TKIP
                        Authentication Suites (1) : PSK
                    IE: Unknown: 32040C121860
                    IE: Unknown: DD06001018020000
                    IE: WPA Version 1
                        Group Cipher : TKIP
                        Pairwise Ciphers (2) : CCMP TKIP
                        Authentication Suites (1) : PSK
          Cell 02 - Address: 00:1D:6A:A3:E7:2D
                    Channel:6
                    Frequency:2.437 GHz (Channel 6)
                    Quality=48/70  Signal level=-62 dBm 
                    Encryption key:on
                    ESSID:"alfabio"
                    Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 11 Mb/s; 6 Mb/s
                              9 Mb/s; 12 Mb/s; 18 Mb/s
                    Bit Rates:24 Mb/s; 36 Mb/s; 48 Mb/s; 54 Mb/s
                    Mode:Master
                    Extra:tsf=00000003e0eb9b64
                    Extra: Last beacon: 752ms ago
                    IE: Unknown: 0007616C666162696F
                    IE: Unknown: 010882848B960C121824
                    IE: Unknown: 030106
                    IE: Unknown: 2A0100
                    IE: Unknown: 32043048606C
                    IE: Unknown: DD180050F20201018A0003A4000027A4000042435E0062322F00
                    IE: Unknown: DD0900037F01010000FF7F
                    IE: Unknown: DD0A00037F04010000000000





alfabio@alfabio-PC:~$ uname -r -m
2.6.32-21-generic i686
alfabio@alfabio-PC:~$ cat /etc/network/interfaces
auto lo
iface lo inet loopback





alfabio@alfabio-PC:~$ nm-tool

NetworkManager Tool

State: disconnected

- Device: eth0 -----------------------------------------------------------------
  Type:              Wired
  Driver:            ATL1E
  State:             unavailable
  Default:           no
  HW Address:        E0:CB:4E:5D:D1:D0

  Capabilities:
    Carrier Detect:  yes

  Wired Properties
    Carrier:         off


- Device: wlan0 ----------------------------------------------------------------
  Type:              802.11 WiFi
  Driver:            ath5k
  State:             disconnected
  Default:           no
  HW Address:        00:25:D3:92:F0:7E

  Capabilities:

  Wireless Properties
    WEP Encryption:  yes
    WPA Encryption:  yes
    WPA2 Encryption: yes

  Wireless Access Points
    alfabio:         Infra, 00:1D:6A:A3:E7:2D, Freq 2437 MHz, Rate 54 Mb/s, Strength 87 WEP
    freeboxdav:      Infra, 00:07:CB:72:C9:0B, Freq 2412 MHz, Rate 54 Mb/s, Strength 28 WPA WPA2

Dernière modification par alfabio (Le 20/06/2010, à 21:42)

Hors ligne

#2 Le 14/06/2010, à 07:46

alfabio

Re : [soluce] ath5k, wifi lent, AR5001 et ath5k phy0: unsupported jumbo

D'après ce que j'ai pu lire, il y a de gros problèmes de compatibilité avec ma carte wifi atheros AR5001 (pas de bol) et Lucid.

Pourtant sur les docs du site il disent que cette carte est 100% compatible.

Si je comprends bien, soit je remet XP, soit je trouve une ancienne version de ubuntu( karmic) et je vois ce qui se passe. sad

Hors ligne

#3 Le 14/06/2010, à 09:23

alfabio

Re : [soluce] ath5k, wifi lent, AR5001 et ath5k phy0: unsupported jumbo

Bon j'avance....

J'ai bascule le mode de sécurité wifi en wpa2-psk (AES) sur ma livebox et depuis plus de déconnexion.

Par contre la vitesse reste tres lente.....:(

Hors ligne

#4 Le 16/06/2010, à 20:54

alfabio

Re : [soluce] ath5k, wifi lent, AR5001 et ath5k phy0: unsupported jumbo

Bon, j'ai réinstallé ubuntu 9.10 et j'ai exactement le même problème.

J'abandonne......

Windows i come back big_smile

A+

Hors ligne

#5 Le 16/06/2010, à 21:45

Marmounette

Re : [soluce] ath5k, wifi lent, AR5001 et ath5k phy0: unsupported jumbo

http://forum.ubuntu-fr.org/viewtopic.php?id=360138


Il reste un gnocchi devant mes yeux... Ah non il vient de disparaître ! :D

Hors ligne

#6 Le 16/06/2010, à 21:51

alfabio

Re : [soluce] ath5k, wifi lent, AR5001 et ath5k phy0: unsupported jumbo

Hello c'est gentil, mais ce n'est pas le même problème, moi j'ai bien les réseaux et il se connecte bien, mais le réseau est instable et hyper lent ...

Hors ligne

#7 Le 16/06/2010, à 22:01

Marmounette

Re : [soluce] ath5k, wifi lent, AR5001 et ath5k phy0: unsupported jumbo

Ah oui mais la je peux pas lire ton débit si tu as fait les commandes sans te connecter smile

Bref peut etre voir avec le Bit Rates mais la tu as fait la commande nm-tool sans etre connecté, je ne peux point dire !

il faut éditer le rc.local

http://doc.ubuntu-fr.org/wifi


Il reste un gnocchi devant mes yeux... Ah non il vient de disparaître ! :D

Hors ligne

#8 Le 17/06/2010, à 22:22

alfabio

Re : [soluce] ath5k, wifi lent, AR5001 et ath5k phy0: unsupported jumbo

Bon entre deux deconnexion voici les resultats :

Pour info sous windows ma carte wifi est reconnu entant que Atheros AR5007EG alors que sous ubuntu elle est reconnu entant que Atheros AR 5001



alfabio@alfabio-laptop:~$ cat /etc/lsb-release
DISTRIB_ID=Ubuntu
DISTRIB_RELEASE=10.04
DISTRIB_CODENAME=lucid
DISTRIB_DESCRIPTION="Ubuntu 10.04 LTS"



alfabio@alfabio-laptop:~$ lsusb
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 002: ID 04f2:b071 Chicony Electronics Co., Ltd 2.0M UVC Webcam / CNF7129
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub



alfabio@alfabio-laptop:~$ lspci
00:00.0 Host bridge: Intel Corporation Mobile 915GM/PM/GMS/910GML Express Processor to DRAM Controller (rev 04)
00:02.0 VGA compatible controller: Intel Corporation Mobile 915GM/GMS/910GML Express Graphics Controller (rev 04)
00:02.1 Display controller: Intel Corporation Mobile 915GM/GMS/910GML Express Graphics Controller (rev 04)
00:1b.0 Audio device: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) High Definition Audio Controller (rev 04)
00:1c.0 PCI bridge: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) PCI Express Port 1 (rev 04)
00:1c.1 PCI bridge: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) PCI Express Port 2 (rev 04)
00:1c.3 PCI bridge: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) PCI Express Port 4 (rev 04)
00:1d.0 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #1 (rev 04)
00:1d.1 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #2 (rev 04)
00:1d.2 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #3 (rev 04)
00:1d.3 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #4 (rev 04)
00:1d.7 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB2 EHCI Controller (rev 04)
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev d4)
00:1f.0 ISA bridge: Intel Corporation 82801FBM (ICH6M) LPC Interface Bridge (rev 04)
00:1f.2 IDE interface: Intel Corporation 82801FBM (ICH6M) SATA Controller (rev 04)
00:1f.3 SMBus: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) SMBus Controller (rev 04)
01:00.0 Ethernet controller: Atheros Communications Inc. AR5001 Wireless Network Adapter (rev 01)
03:00.0 Ethernet controller: Atheros Communications Atheros AR8121/AR8113/AR8114 PCI-E Ethernet Controller (rev b0)



alfabio@alfabio-laptop:~$ lspci -nn | grep -i net
01:00.0 Ethernet controller [0200]: Atheros Communications Inc. AR5001 Wireless Network Adapter [168c:001c] (rev 01)
03:00.0 Ethernet controller [0200]: Atheros Communications Atheros AR8121/AR8113/AR8114 PCI-E Ethernet Controller [1969:1026] (rev b0)



alfabio@alfabio-laptop:~$ sudo lshw -C network
[sudo] password for alfabio:
  *-network               
       description: Ethernet interface
       product: Atheros AR8121/AR8113/AR8114 PCI-E Ethernet Controller
       vendor: Atheros Communications
       physical id: 0
       bus info: pci@0000:03:00.0
       logical name: eth0
       version: b0
       serial: e0:cb:4e:5d:d1:d0
       capacity: 100MB/s
       width: 64 bits
       clock: 33MHz
       capabilities: pm msi pciexpress vpd bus_master cap_list ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd autonegotiation
       configuration: autonegotiation=on broadcast=yes driver=ATL1E driverversion=1.0.0.7-NAPI firmware=L1e latency=0 link=no multicast=yes port=twisted pair
       resources: irq:27 memory:fbfc0000-fbffffff ioport:ec00(size=128)
  *-network
       description: Wireless interface
       product: AR5001 Wireless Network Adapter
       vendor: Atheros Communications Inc.
       physical id: 0
       bus info: pci@0000:01:00.0
       logical name: wlan0
       version: 01
       serial: 00:25:d3:92:f0:7e
       width: 64 bits
       clock: 33MHz
       capabilities: pm msi pciexpress msix bus_master cap_list ethernet physical wireless
       configuration: broadcast=yes driver=ath5k ip=192.168.1.14 latency=0 multicast=yes wireless=IEEE 802.11bg
       resources: irq:19 memory:fbef0000-fbefffff



alfabio@alfabio-laptop:~$ lsmod
Module                  Size  Used by
aes_i586                7268  2
aes_generic            26863  1 aes_i586
binfmt_misc             6587  1
arc4                    1153  2
ppdev                   5259  0
fbcon                  35102  71
snd_hda_codec_realtek   203168  1
tileblit                2031  1 fbcon
font                    7557  1 fbcon
bitblit                 4707  1 fbcon
softcursor              1189  1 bitblit
vga16fb                11385  0
vgastate                8961  1 vga16fb
snd_hda_intel          21877  2
snd_hda_codec          74201  2 snd_hda_codec_realtek,snd_hda_intel
snd_hwdep               5412  1 snd_hda_codec
snd_pcm_oss            35308  0
snd_mixer_oss          13746  1 snd_pcm_oss
snd_pcm                70662  3 snd_hda_intel,snd_hda_codec,snd_pcm_oss
snd_seq_dummy           1338  0
snd_seq_oss            26726  0
snd_seq_midi            4557  0
snd_rawmidi            19056  1 snd_seq_midi
snd_seq_midi_event      6003  2 snd_seq_oss,snd_seq_midi
snd_seq                47263  6 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_seq_midi_event
joydev                  8708  0
snd_timer              19098  2 snd_pcm,snd_seq
snd_seq_device          5700  5 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_rawmidi,snd_seq
ath5k                 121792  0
i915                  282354  4
snd                    54148  16 snd_hda_codec_realtek,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_seq_oss,snd_rawmidi,snd_seq,snd_timer,snd_seq_device
mac80211              204922  1 ath5k
drm_kms_helper         29297  1 i915
uvcvideo               56990  0
ath                     7611  1 ath5k
psmouse                63245  0
drm                   162471  5 i915,drm_kms_helper
videodev               34361  1 uvcvideo
cfg80211              126485  3 ath5k,mac80211,ath
intel_agp              24177  2 i915
i2c_algo_bit            5028  1 i915
v4l1_compat            13251  2 uvcvideo,videodev
serio_raw               3978  0
soundcore               6620  1 snd
led_class               2864  1 ath5k
agpgart                31724  2 drm,intel_agp
video                  17375  1 i915
snd_page_alloc          7076  2 snd_hda_intel,snd_pcm
output                  1871  1 video
eeepc_laptop           12847  0
lp                      7028  0
parport                32635  2 ppdev,lp
atl1e                  28018  0



alfabio@alfabio-laptop:~$ iwconfig
lo        no wireless extensions.

eth0      no wireless extensions.

wlan0     IEEE 802.11bg  ESSID:"alfabio" 
          Mode:Managed  Frequency:2.437 GHz  Access Point: 00:1D:6A:A3:E7:2D   
          Bit Rate=48 Mb/s   Tx-Power=20 dBm   
          Retry  long limit:7   RTS thr:off   Fragment thr:off
          Power Management:off
          Link Quality=64/70  Signal level=-46 dBm 
          Rx invalid nwid:0  Rx invalid crypt:0  Rx invalid frag:0
          Tx excessive retries:0  Invalid misc:0   Missed beacon:0



alfabio@alfabio-laptop:~$ ifconfig
eth0      Link encap:Ethernet  HWaddr e0:cb:4e:5d:d1:d0 
          UP BROADCAST MULTICAST  MTU:1500  Metric:1
          Packets reçus:0 erreurs:0 :0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:1
          collisions:0 lg file transmission:1000
          Octets reçus:0 (0.0 B) Octets transmis:0 (0.0 B)
          Interruption:27

lo        Link encap:Boucle locale 
          inet adr:127.0.0.1  Masque:255.0.0.0
          adr inet6: ::1/128 Scope:Hôte
          UP LOOPBACK RUNNING  MTU:16436  Metric:1
          Packets reçus:8 erreurs:0 :0 overruns:0 frame:0
          TX packets:8 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 lg file transmission:0
          Octets reçus:614 (614.0 B) Octets transmis:614 (614.0 B)

wlan0     Link encap:Ethernet  HWaddr 00:25:d3:92:f0:7e 
          inet adr:192.168.1.14  Bcast:192.168.1.255  Masque:255.255.255.0
          adr inet6: fe80::225:d3ff:fe92:f07e/64 Scope:Lien
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          Packets reçus:422 erreurs:0 :0 overruns:0 frame:0
          TX packets:250 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 lg file transmission:1000
          Octets reçus:292803 (292.8 KB) Octets transmis:27383 (27.3 KB)



alfabio@alfabio-laptop:~$ sudo iwlist scan
lo        Interface doesn't support scanning.

eth0      Interface doesn't support scanning.

wlan0     Interface doesn't support scanning : Device or resource busy



alfabio@alfabio-laptop:~$ uname -r -m
2.6.32-22-generic i686



alfabio@alfabio-laptop:~$ cat /etc/network/interfaces
auto lo
iface lo inet loopback


alfabio@alfabio-laptop:~$ nm-tool

NetworkManager Tool

State: connected

- Device: eth0 -----------------------------------------------------------------
  Type:              Wired
  Driver:            ATL1E
  State:             unavailable
  Default:           no
  HW Address:        E0:CB:4E:5D:D1:D0

  Capabilities:
    Carrier Detect:  yes

  Wired Properties
    Carrier:         off


- Device: wlan0  [Auto alfabio] ------------------------------------------------
  Type:              802.11 WiFi
  Driver:            ath5k
  State:             connected
  Default:           yes
  HW Address:        00:25:D3:92:F0:7E

  Capabilities:
    Speed:           1 Mb/s

  Wireless Properties
    WEP Encryption:  yes
    WPA Encryption:  yes
    WPA2 Encryption: yes

  Wireless Access Points (* = current AP)
    *alfabio:        Infra, 00:1D:6A:A3:E7:2D, Freq 2437 MHz, Rate 54 Mb/s, Strength 95 WPA2
    freeboxdav:      Infra, 00:07:CB:72:C9:0B, Freq 2412 MHz, Rate 54 Mb/s, Strength 28 WPA WPA2

  IPv4 Settings:
    Address:         192.168.1.14
    Prefix:          24 (255.255.255.0)
    Gateway:         192.168.1.1

    DNS:             192.168.1.1

Hors ligne

#9 Le 17/06/2010, à 22:28

Marmounette

Re : [soluce] ath5k, wifi lent, AR5001 et ath5k phy0: unsupported jumbo

fais la commande

sudo ifdown wlan0
sudo iwconfig wlan0 rate 54M
sudo ifup wlan0

ensuite redonne moi le résultat de nm-tool


Il reste un gnocchi devant mes yeux... Ah non il vient de disparaître ! :D

Hors ligne

#10 Le 17/06/2010, à 22:31

alfabio

Re : [soluce] ath5k, wifi lent, AR5001 et ath5k phy0: unsupported jumbo

Hello,

J'essaye mais plus de connection possible pour le moment....il demande la clé...comme d'habitude.

Hors ligne

#11 Le 17/06/2010, à 22:38

alfabio

Re : [soluce] ath5k, wifi lent, AR5001 et ath5k phy0: unsupported jumbo

alfabio@alfabio-laptop:~$ sudo ifdown wlan0
Ignoring unknown interface wlan0=wlan0.
alfabio@alfabio-laptop:~$ sudo iwconfig wlan0 rate 54M
alfabio@alfabio-laptop:~$ sudo ifup wlan0
Ignoring unknown interface wlan0=wlan0.
alfabio@alfabio-laptop:~$ nm-tool

NetworkManager Tool

State: connected

- Device: eth0 -----------------------------------------------------------------
  Type:              Wired
  Driver:            ATL1E
  State:             unavailable
  Default:           no
  HW Address:        E0:CB:4E:5D:D1:D0

  Capabilities:
    Carrier Detect:  yes

  Wired Properties
    Carrier:         off


- Device: wlan0  [Auto alfabio] ------------------------------------------------
  Type:              802.11 WiFi
  Driver:            ath5k
  State:             connected
  Default:           yes
  HW Address:        00:25:D3:92:F0:7E

  Capabilities:
    Speed:           54 Mb/s

  Wireless Properties
    WEP Encryption:  yes
    WPA Encryption:  yes
    WPA2 Encryption: yes

  Wireless Access Points (* = current AP)
    *alfabio:        Infra, 00:1D:6A:A3:E7:2D, Freq 2437 MHz, Rate 54 Mb/s, Strength 77 WPA2
    freeboxdav:      Infra, 00:07:CB:72:C9:0B, Freq 2412 MHz, Rate 54 Mb/s, Strength 38 WPA WPA2

  IPv4 Settings:
    Address:         192.168.1.14
    Prefix:          24 (255.255.255.0)
    Gateway:         192.168.1.1

    DNS:             192.168.1.1

Hors ligne

#12 Le 18/06/2010, à 01:33

pierig

Re : [soluce] ath5k, wifi lent, AR5001 et ath5k phy0: unsupported jumbo

Pour info, sur un EEEpc 1000hd, j'utilise Wicd a la place de Network Manager car j'avais énormément de problèmes de connection (instable, refus de mot de passe...)

Juste une truc, il faut faire attention a ne pas avoir les deux qui tournent en même temps car sinon la connection ne se fait pas correctement. Ils prennent la main alternativement...


Si on doit choisir entre droits de l'Homme et droits de l'entreprise privée, SVP choisissons les droits de l'Homme.

Hors ligne

#13 Le 18/06/2010, à 10:37

Marmounette

Re : [soluce] ath5k, wifi lent, AR5001 et ath5k phy0: unsupported jumbo

Grmmmmm

Ca c'est pas top 

 Interface doesn't support scanning : Device or resource busy

Comme dit pierig, tu as les deux d'installé ?

(Il a quand meme changé le Bit Rate oO)

Dis moi tu as bien une connexion filiaire sur ce pc en plus du wifi ?

Je vais tenter un truc mais il me faut etre sure que tu aies le filiaire avant.


Il reste un gnocchi devant mes yeux... Ah non il vient de disparaître ! :D

Hors ligne

#14 Le 18/06/2010, à 13:07

alfabio

Re : [soluce] ath5k, wifi lent, AR5001 et ath5k phy0: unsupported jumbo

Hello,

Je ne sais pas ce que j'ai d'installé, c'est "lucid" notebook d'origine et je n'ai rien modifié.

Je ne sais pas ce qu'est wicd et network maneger.

Oui j'ai une connexion ethernet que je débranche quand je fais mes test wifi.

A+

Hors ligne

#15 Le 18/06/2010, à 18:57

alfabio

Re : [soluce] ath5k, wifi lent, AR5001 et ath5k phy0: unsupported jumbo

Bon, j'ai installé wicd et supprime network manager, mais toujours les memes soucis (impossible de se connecter ) sauf que en plus il faut choisir entre "preshared key" et " passphrase et je sais pas quoi prendre ???

Hors ligne

#16 Le 18/06/2010, à 19:46

Marmounette

Re : [soluce] ath5k, wifi lent, AR5001 et ath5k phy0: unsupported jumbo

Bon tu vires Network Manager et Wicd,

ensuite tu édites en sudo ce fichier : /etc/network/interfaces et tu ajoutes apres

auto lo
iface lo inet loopback

le code suivant :

auto wlan0
iface wlan0 inet dhcp
wireless-essid Wanadoo_xxxx (nom de ton réseau)
wireless-key XXXXXXXXXXXXXXXXXXXXXXX (ta clé)

auto eth0
iface eth0 inet dhcp

Puis tu enregistres, tu redémarres, tu vérifies ta connexion ethernet si elle fonctionne, puis tu redémarres en débranchant le cable et la tu vois s'il se connecte en wifi et tu refais toutes les commandes si ca marche pas et tu reviens les poster (pour voir si ta carte est toujours "busy")

merci smile


Il reste un gnocchi devant mes yeux... Ah non il vient de disparaître ! :D

Hors ligne

#17 Le 18/06/2010, à 20:47

alfabio

Re : [soluce] ath5k, wifi lent, AR5001 et ath5k phy0: unsupported jumbo

Bon j'ai fais ce que tu m'as dit, le wifi se connecte bien directement, mais reste super lent, voci les résultats :

alfabio@alfabio-laptop:~$ sudo lshw -C network
[sudo] password for alfabio:
  *-network               
       description: Ethernet interface
       product: Atheros AR8121/AR8113/AR8114 PCI-E Ethernet Controller
       vendor: Atheros Communications
       physical id: 0
       bus info: pci@0000:03:00.0
       logical name: eth0
       version: b0
       serial: e0:cb:4e:5d:d1:d0
       capacity: 100MB/s
       width: 64 bits
       clock: 33MHz
       capabilities: pm msi pciexpress vpd bus_master cap_list ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd autonegotiation
       configuration: autonegotiation=on broadcast=yes driver=ATL1E driverversion=1.0.0.7-NAPI firmware=L1e latency=0 link=no multicast=yes port=twisted pair
       resources: irq:27 memory:fbfc0000-fbffffff ioport:ec00(size=128)
  *-network
       description: Wireless interface
       product: AR5001 Wireless Network Adapter
       vendor: Atheros Communications Inc.
       physical id: 0
       bus info: pci@0000:01:00.0
       logical name: wlan0
       version: 01
       serial: 00:25:d3:92:f0:7e
       width: 64 bits
       clock: 33MHz
       capabilities: pm msi pciexpress msix bus_master cap_list ethernet physical wireless
       configuration: broadcast=yes driver=ath5k ip=192.168.1.14 latency=0 multicast=yes wireless=IEEE 802.11bg
       resources: irq:19 memory:fbef0000-fbefffff



alfabio@alfabio-laptop:~$ lsmod
Module                  Size  Used by
aes_i586                7268  2
aes_generic            26863  1 aes_i586
binfmt_misc             6587  1
ppdev                   5259  0
arc4                    1153  2
snd_hda_codec_realtek   203168  1
fbcon                  35102  71
tileblit                2031  1 fbcon
font                    7557  1 fbcon
bitblit                 4707  1 fbcon
softcursor              1189  1 bitblit
vga16fb                11385  0
vgastate                8961  1 vga16fb
snd_hda_intel          21877  2
snd_hda_codec          74201  2 snd_hda_codec_realtek,snd_hda_intel
snd_hwdep               5412  1 snd_hda_codec
snd_pcm_oss            35308  0
snd_mixer_oss          13746  1 snd_pcm_oss
snd_pcm                70662  3 snd_hda_intel,snd_hda_codec,snd_pcm_oss
snd_seq_dummy           1338  0
snd_seq_oss            26726  0
snd_seq_midi            4557  0
snd_rawmidi            19056  1 snd_seq_midi
snd_seq_midi_event      6003  2 snd_seq_oss,snd_seq_midi
snd_seq                47263  6 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_seq_midi_event
snd_timer              19098  2 snd_pcm,snd_seq
snd_seq_device          5700  5 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_rawmidi,snd_seq
ath5k                 121792  0
joydev                  8708  0
i915                  282354  4
mac80211              204922  1 ath5k
snd                    54148  16 snd_hda_codec_realtek,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_seq_oss,snd_rawmidi,snd_seq,snd_timer,snd_seq_device
drm_kms_helper         29297  1 i915
ath                     7611  1 ath5k
uvcvideo               56990  0
drm                   162471  5 i915,drm_kms_helper
cfg80211              126485  3 ath5k,mac80211,ath
psmouse                63245  0
videodev               34361  1 uvcvideo
i2c_algo_bit            5028  1 i915
soundcore               6620  1 snd
intel_agp              24177  2 i915
v4l1_compat            13251  2 uvcvideo,videodev
serio_raw               3978  0
led_class               2864  1 ath5k
video                  17375  1 i915
snd_page_alloc          7076  2 snd_hda_intel,snd_pcm
agpgart                31724  2 drm,intel_agp
output                  1871  1 video
eeepc_laptop           12847  0
lp                      7028  0
parport                32635  2 ppdev,lp
atl1e                  28018  0



alfabio@alfabio-laptop:~$ iwconfig
lo        no wireless extensions.

eth0      no wireless extensions.

wlan0     IEEE 802.11bg  ESSID:"alfabio" 
          Mode:Managed  Frequency:2.437 GHz  Access Point: 00:1D:6A:A3:E7:2D   
          Bit Rate=54 Mb/s   Tx-Power=20 dBm   
          Retry  long limit:7   RTS thr:off   Fragment thr:off
          Power Management:off
          Link Quality=64/70  Signal level=-46 dBm 
          Rx invalid nwid:0  Rx invalid crypt:0  Rx invalid frag:0
          Tx excessive retries:0  Invalid misc:0   Missed beacon:0



alfabio@alfabio-laptop:~$ ifconfig
eth0      Link encap:Ethernet  HWaddr e0:cb:4e:5d:d1:d0 
          UP BROADCAST MULTICAST  MTU:1500  Metric:1
          Packets reçus:0 erreurs:0 :0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:2
          collisions:0 lg file transmission:1000
          Octets reçus:0 (0.0 B) Octets transmis:0 (0.0 B)
          Interruption:27

lo        Link encap:Boucle locale 
          inet adr:127.0.0.1  Masque:255.0.0.0
          adr inet6: ::1/128 Scope:Hôte
          UP LOOPBACK RUNNING  MTU:16436  Metric:1
          Packets reçus:90 erreurs:0 :0 overruns:0 frame:0
          TX packets:90 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 lg file transmission:0
          Octets reçus:6904 (6.9 KB) Octets transmis:6904 (6.9 KB)

wlan0     Link encap:Ethernet  HWaddr 00:25:d3:92:f0:7e 
          inet adr:192.168.1.14  Bcast:192.168.1.255  Masque:255.255.255.0
          adr inet6: fe80::225:d3ff:fe92:f07e/64 Scope:Lien
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          Packets reçus:1541 erreurs:0 :0 overruns:0 frame:0
          TX packets:1408 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 lg file transmission:1000
          Octets reçus:1265443 (1.2 MB) Octets transmis:206244 (206.2 KB)




alfabio@alfabio-laptop:~$ uname -r -m
2.6.32-22-generic i686
alfabio@alfabio-laptop:~$ cat /etc/network/interfaces
auto lo
iface lo inet loopback
auto wlan0
iface wlan0 inet dhcp
wireless-essid Wanadoo_alfabio
wireless-key xxxxxxxxxxxxxxxxxxxxxxxxxx tongue



alfabio@alfabio-laptop:~$ nm-tool
Le programme « nm-tool » n'est pas installé.  Vous pouvez l'installer en saisissant :
sudo apt-get install network-manager



alfabio@alfabio-laptop:~$ sudo iwlist scan
lo        Interface doesn't support scanning.

eth0      Interface doesn't support scanning.

wlan0     Scan completed :
          Cell 01 - Address: 00:07:CB:72:C9:0B
                    Channel:1
                    Frequency:2.412 GHz (Channel 1)
                    Quality=21/70  Signal level=-89 dBm 
                    Encryption key:on
                    ESSID:"freeboxdav"
                    Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 11 Mb/s; 18 Mb/s
                              24 Mb/s; 36 Mb/s; 54 Mb/s
                    Bit Rates:6 Mb/s; 9 Mb/s; 12 Mb/s; 48 Mb/s
                    Mode:Master
                    Extra:tsf=0000001ec82ca168
                    Extra: Last beacon: 5452ms ago
                    IE: Unknown: 000A66726565626F78646176
                    IE: Unknown: 010882848B962430486C
                    IE: Unknown: 030101
                    IE: Unknown: 2A0104
                    IE: Unknown: 2F0104
                    IE: IEEE 802.11i/WPA2 Version 1
                        Group Cipher : TKIP
                        Pairwise Ciphers (2) : CCMP TKIP
                        Authentication Suites (1) : PSK
                    IE: Unknown: 32040C121860
                    IE: Unknown: DD06001018020000
                    IE: WPA Version 1
                        Group Cipher : TKIP
                        Pairwise Ciphers (2) : CCMP TKIP
                        Authentication Suites (1) : PSK
          Cell 02 - Address: 00:1D:6A:A3:E7:2D
                    Channel:6
                    Frequency:2.437 GHz (Channel 6)
                    Quality=45/70  Signal level=-65 dBm 
                    Encryption key:on
                    ESSID:"alfabio"
                    Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 11 Mb/s; 6 Mb/s
                              9 Mb/s; 12 Mb/s; 18 Mb/s
                    Bit Rates:24 Mb/s; 36 Mb/s; 48 Mb/s; 54 Mb/s
                    Mode:Master
                    Extra:tsf=00000012dd90c181
                    Extra: Last beacon: 188ms ago
                    IE: Unknown: 0007616C666162696F
                    IE: Unknown: 010882848B960C121824
                    IE: Unknown: 030106
                    IE: IEEE 802.11i/WPA2 Version 1
                        Group Cipher : CCMP
                        Pairwise Ciphers (1) : CCMP
                        Authentication Suites (1) : PSK
                    IE: Unknown: 2A0100
                    IE: Unknown: 32043048606C
                    IE: Unknown: DD180050F20201018E0003A4000027A4000042435E0062322F00
                    IE: Unknown: DD0900037F01010000FF7F
                    IE: Unknown: DD0A00037F04010000000000

alfabio@alfabio-laptop:~$

Hors ligne

#18 Le 19/06/2010, à 11:16

Marmounette

Re : [soluce] ath5k, wifi lent, AR5001 et ath5k phy0: unsupported jumbo

Déjà il y a de bonnes nouvelles smile

avant tu avais :

alfabio@alfabio-laptop:~$ sudo iwlist scan
lo        Interface doesn't support scanning.

eth0      Interface doesn't support scanning.

wlan0     Interface doesn't support scanning : Device or resource busy

maintenant il scan ! Et tu te connectes, reste le soucis du lent. On va y arriver smile


Il reste un gnocchi devant mes yeux... Ah non il vient de disparaître ! :D

Hors ligne

#19 Le 19/06/2010, à 11:28

Marmounette

Re : [soluce] ath5k, wifi lent, AR5001 et ath5k phy0: unsupported jumbo

tu pourras me donner la sortie de la commande dmesg ?

je pourrai finir de résoudre le soucis avec ça smile

je cherche des lignes avec erreur au niveau du driver ath5k tongue


Il reste un gnocchi devant mes yeux... Ah non il vient de disparaître ! :D

Hors ligne

#20 Le 19/06/2010, à 14:51

alfabio

Re : [soluce] ath5k, wifi lent, AR5001 et ath5k phy0: unsupported jumbo

Bonjour,

Tout d'abord merci de t'impliquer autant dans mon probleme cool

Voici le resultat de dmesg :



[    0.112001] NET: Registered protocol family 16
[    0.112001] EISA bus registered
[    0.112001] ACPI: bus type pci registered
[    0.112001] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
[    0.112001] PCI: Not using MMCONFIG.
[    0.112001] PCI: PCI BIOS revision 3.00 entry at 0xf0031, last bus=5
[    0.112001] PCI: Using configuration type 1 for base access
[    0.114067] bio: create slab <bio-0> at 0
[    0.116499] ACPI: EC: Look up EC in DSDT
[    0.119245] ACPI: Executed 1 blocks of module-level executable AML code
[    0.135182] ACPI: Interpreter enabled
[    0.135221] ACPI: (supports S0 S3 S4 S5)
[    0.135289] ACPI: Using IOAPIC for interrupt routing
[    0.135496] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
[    0.142285] PCI: MCFG area at e0000000 reserved in ACPI motherboard resources
[    0.142296] PCI: Using MMCONFIG for extended config space
[    0.162399] ACPI: EC: GPE = 0x18, I/O: command/status = 0x66, data = 0x62
[    0.162979] ACPI: No dock devices found.
[    0.163471] ACPI: PCI Root Bridge [PCI0] (0000:00)
[    0.163693] pci 0000:00:02.0: reg 10 32bit mmio: [0xf7f00000-0xf7f7ffff]
[    0.163708] pci 0000:00:02.0: reg 14 io port: [0xdc00-0xdc07]
[    0.163719] pci 0000:00:02.0: reg 18 32bit mmio pref: [0xd0000000-0xdfffffff]
[    0.163730] pci 0000:00:02.0: reg 1c 32bit mmio: [0xf7ec0000-0xf7efffff]
[    0.163789] pci 0000:00:02.1: reg 10 32bit mmio: [0xf7f80000-0xf7ffffff]
[    0.163920] pci 0000:00:1b.0: reg 10 64bit mmio: [0xf7eb8000-0xf7ebbfff]
[    0.163987] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.164021] pci 0000:00:1b.0: PME# disabled
[    0.164129] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.164138] pci 0000:00:1c.0: PME# disabled
[    0.164240] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[    0.164249] pci 0000:00:1c.1: PME# disabled
[    0.164356] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[    0.164365] pci 0000:00:1c.3: PME# disabled
[    0.164437] pci 0000:00:1d.0: reg 20 io port: [0xd400-0xd41f]
[    0.164508] pci 0000:00:1d.1: reg 20 io port: [0xd480-0xd49f]
[    0.164581] pci 0000:00:1d.2: reg 20 io port: [0xd800-0xd81f]
[    0.164655] pci 0000:00:1d.3: reg 20 io port: [0xd880-0xd89f]
[    0.164732] pci 0000:00:1d.7: reg 10 32bit mmio: [0xf7eb7c00-0xf7eb7fff]
[    0.164800] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[    0.164809] pci 0000:00:1d.7: PME# disabled
[    0.164977] pci 0000:00:1f.0: Force enabled HPET at 0xfed00000
[    0.164994] pci 0000:00:1f.0: quirk: region 0800-087f claimed by ICH6 ACPI/GPIO/TCO
[    0.165002] pci 0000:00:1f.0: quirk: region 0480-04bf claimed by ICH6 GPIO
[    0.165013] pci 0000:00:1f.0: LPC Generic IO decode 2 PIO at 0380-038f
[    0.165073] pci 0000:00:1f.2: reg 10 io port: [0x00-0x07]
[    0.165085] pci 0000:00:1f.2: reg 14 io port: [0x00-0x03]
[    0.165096] pci 0000:00:1f.2: reg 18 io port: [0x00-0x07]
[    0.165108] pci 0000:00:1f.2: reg 1c io port: [0x00-0x03]
[    0.165119] pci 0000:00:1f.2: reg 20 io port: [0xffa0-0xffaf]
[    0.165156] pci 0000:00:1f.2: PME# supported from D3hot
[    0.165165] pci 0000:00:1f.2: PME# disabled
[    0.165233] pci 0000:00:1f.3: reg 20 io port: [0x400-0x41f]
[    0.165421] pci 0000:03:00.0: reg 10 64bit mmio: [0xfbfc0000-0xfbffffff]
[    0.165436] pci 0000:03:00.0: reg 18 io port: [0xec00-0xec7f]
[    0.165517] pci 0000:03:00.0: PME# supported from D3hot D3cold
[    0.165526] pci 0000:03:00.0: PME# disabled
[    0.165599] pci 0000:00:1c.1: bridge io port: [0xe000-0xefff]
[    0.165608] pci 0000:00:1c.1: bridge 32bit mmio: [0xfbf00000-0xfbffffff]
[    0.165699] pci 0000:01:00.0: reg 10 64bit mmio: [0xfbef0000-0xfbefffff]
[    0.165857] pci 0000:00:1c.3: bridge 32bit mmio: [0xf8000000-0xfbefffff]
[    0.165870] pci 0000:00:1c.3: bridge 64bit mmio pref: [0xf0000000-0xf6ffffff]
[    0.165940] pci 0000:00:1e.0: transparent bridge
[    0.165981] pci_bus 0000:00: on NUMA node 0
[    0.166016] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[    0.166497] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P3._PRT]
[    0.166727] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P5._PRT]
[    0.166938] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P7._PRT]
[    0.182705] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[    0.183241] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[    0.183730] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 *7 10 11 12 14 15)
[    0.184297] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[    0.184806] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[    0.185318] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[    0.185826] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[    0.186332] ACPI: PCI Interrupt Link [LNKH] (IRQs *3 4 5 6 7 10 11 12 14 15)
[    0.186748] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[    0.186782] vgaarb: loaded
[    0.187174] SCSI subsystem initialized
[    0.187437] libata version 3.00 loaded.
[    0.187796] usbcore: registered new interface driver usbfs
[    0.187852] usbcore: registered new interface driver hub
[    0.188052] usbcore: registered new device driver usb
[    0.188691] ACPI: WMI: Mapper loaded
[    0.188699] PCI: Using ACPI for IRQ routing
[    0.189160] NetLabel: Initializing
[    0.189170] NetLabel:  domain hash size = 128
[    0.189174] NetLabel:  protocols = UNLABELED CIPSOv4
[    0.189210] NetLabel:  unlabeled traffic allowed by default
[    0.189625] hpet clockevent registered
[    0.189636] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[    0.189647] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[    0.189660] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[    0.192053] Switching to clocksource tsc
[    0.197138] AppArmor: AppArmor Filesystem Enabled
[    0.197183] pnp: PnP ACPI init
[    0.197235] ACPI: bus type pnp registered
[    0.204683] pnp: PnP ACPI: found 13 devices
[    0.204696] ACPI: ACPI bus type pnp unregistered
[    0.204706] PnPBIOS: Disabled by ACPI PNP
[    0.204755] system 00:01: iomem range 0xfed13000-0xfed19fff has been reserved
[    0.204788] system 00:08: ioport range 0x380-0x395 has been reserved
[    0.204798] system 00:08: ioport range 0x4d0-0x4d1 has been reserved
[    0.204806] system 00:08: ioport range 0x800-0x87f has been reserved
[    0.204813] system 00:08: ioport range 0x480-0x4bf has been reserved
[    0.204822] system 00:08: iomem range 0xfed1c000-0xfed1ffff has been reserved
[    0.204830] system 00:08: iomem range 0xfed20000-0xfed8ffff has been reserved
[    0.204839] system 00:08: iomem range 0xfff00000-0xffffffff could not be reserved
[    0.204860] system 00:09: iomem range 0xfec00000-0xfec00fff could not be reserved
[    0.204868] system 00:09: iomem range 0xfee00000-0xfee00fff has been reserved
[    0.204887] system 00:0a: iomem range 0xe0000000-0xefffffff has been reserved
[    0.204905] system 00:0b: iomem range 0xe0000000-0xefffffff has been reserved
[    0.204924] system 00:0c: iomem range 0x0-0x9ffff could not be reserved
[    0.204933] system 00:0c: iomem range 0xc0000-0xcffff could not be reserved
[    0.204941] system 00:0c: iomem range 0xe0000-0xfffff could not be reserved
[    0.204949] system 00:0c: iomem range 0x100000-0x3f7fffff could not be reserved
[    0.240214] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:04
[    0.240225] pci 0000:00:1c.0:   IO window: 0x1000-0x1fff
[    0.240236] pci 0000:00:1c.0:   MEM window: 0x40000000-0x401fffff
[    0.240245] pci 0000:00:1c.0:   PREFETCH window: 0x00000040200000-0x000000403fffff
[    0.240259] pci 0000:00:1c.1: PCI bridge, secondary bus 0000:03
[    0.240266] pci 0000:00:1c.1:   IO window: 0xe000-0xefff
[    0.240276] pci 0000:00:1c.1:   MEM window: 0xfbf00000-0xfbffffff
[    0.240285] pci 0000:00:1c.1:   PREFETCH window: 0x00000040400000-0x000000405fffff
[    0.240298] pci 0000:00:1c.3: PCI bridge, secondary bus 0000:01
[    0.240306] pci 0000:00:1c.3:   IO window: 0x2000-0x2fff
[    0.240316] pci 0000:00:1c.3:   MEM window: 0xf8000000-0xfbefffff
[    0.240324] pci 0000:00:1c.3:   PREFETCH window: 0x000000f0000000-0x000000f6ffffff
[    0.240337] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:05
[    0.240343] pci 0000:00:1e.0:   IO window: disabled
[    0.240351] pci 0000:00:1e.0:   MEM window: disabled
[    0.240359] pci 0000:00:1e.0:   PREFETCH window: disabled
[    0.240384] pci 0000:00:1c.0: enabling device (0104 -> 0107)
[    0.240399]   alloc irq_desc for 16 on node -1
[    0.240405]   alloc kstat_irqs on node -1
[    0.240424] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    0.240435] pci 0000:00:1c.0: setting latency timer to 64
[    0.240452]   alloc irq_desc for 17 on node -1
[    0.240457]   alloc kstat_irqs on node -1
[    0.240466] pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[    0.240475] pci 0000:00:1c.1: setting latency timer to 64
[    0.240490] pci 0000:00:1c.3: enabling device (0106 -> 0107)
[    0.240498]   alloc irq_desc for 19 on node -1
[    0.240502]   alloc kstat_irqs on node -1
[    0.240511] pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[    0.240520] pci 0000:00:1c.3: setting latency timer to 64
[    0.240533] pci 0000:00:1e.0: setting latency timer to 64
[    0.240544] pci_bus 0000:00: resource 0 io:  [0x00-0xffff]
[    0.240552] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff]
[    0.240560] pci_bus 0000:04: resource 0 io:  [0x1000-0x1fff]
[    0.240567] pci_bus 0000:04: resource 1 mem: [0x40000000-0x401fffff]
[    0.240574] pci_bus 0000:04: resource 2 pref mem [0x40200000-0x403fffff]
[    0.240581] pci_bus 0000:03: resource 0 io:  [0xe000-0xefff]
[    0.240588] pci_bus 0000:03: resource 1 mem: [0xfbf00000-0xfbffffff]
[    0.240595] pci_bus 0000:03: resource 2 pref mem [0x40400000-0x405fffff]
[    0.240603] pci_bus 0000:01: resource 0 io:  [0x2000-0x2fff]
[    0.240610] pci_bus 0000:01: resource 1 mem: [0xf8000000-0xfbefffff]
[    0.240617] pci_bus 0000:01: resource 2 pref mem [0xf0000000-0xf6ffffff]
[    0.240625] pci_bus 0000:05: resource 3 io:  [0x00-0xffff]
[    0.240633] pci_bus 0000:05: resource 4 mem: [0x000000-0xffffffff]
[    0.240724] NET: Registered protocol family 2
[    0.240988] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.241831] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.243576] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[    0.244487] TCP: Hash tables configured (established 131072 bind 65536)
[    0.244495] TCP reno registered
[    0.244746] NET: Registered protocol family 1
[    0.244799] pci 0000:00:02.0: Boot video device
[    0.245337] cpufreq-nforce2: No nForce2 chipset.
[    0.245424] Scanning for low memory corruption every 60 seconds
[    0.245780] audit: initializing netlink socket (disabled)
[    0.245827] type=2000 audit(1276962049.243:1): initialized
[    0.273529] Trying to unpack rootfs image as initramfs...
[    0.308710] highmem bounce pool size: 64 pages
[    0.308729] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[    0.313153] VFS: Disk quotas dquot_6.5.2
[    0.313371] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    0.315662] fuse init (API version 7.13)
[    0.316142] msgmni has been set to 1716
[    0.320874] alg: No test for stdrng (krng)
[    0.321139] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[    0.321151] io scheduler noop registered
[    0.321156] io scheduler anticipatory registered
[    0.321161] io scheduler deadline registered
[    0.321367] io scheduler cfq registered (default)
[    0.321709]   alloc irq_desc for 24 on node -1
[    0.321717]   alloc kstat_irqs on node -1
[    0.321737] pcieport 0000:00:1c.0: irq 24 for MSI/MSI-X
[    0.321753] pcieport 0000:00:1c.0: setting latency timer to 64
[    0.322022]   alloc irq_desc for 25 on node -1
[    0.322032]   alloc kstat_irqs on node -1
[    0.322050] pcieport 0000:00:1c.1: irq 25 for MSI/MSI-X
[    0.322065] pcieport 0000:00:1c.1: setting latency timer to 64
[    0.322321]   alloc irq_desc for 26 on node -1
[    0.322330]   alloc kstat_irqs on node -1
[    0.322347] pcieport 0000:00:1c.3: irq 26 for MSI/MSI-X
[    0.322361] pcieport 0000:00:1c.3: setting latency timer to 64
[    0.322610] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    0.322946] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    0.323339] ACPI: AC Adapter [AC0] (on-line)
[    0.323734] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0
[    0.329635] ACPI: Lid Switch [LID]
[    0.329833] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1
[    0.329847] ACPI: Sleep Button [SLPB]
[    0.330009] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2
[    0.330019] ACPI: Power Button [PWRB]
[    0.330178] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[    0.330187] ACPI: Power Button [PWRF]
[    0.331849] Marking TSC unstable due to TSC halts in idle
[    0.332122] processor LNXCPU:00: registered as cooling_device0
[    0.340861] Switching to clocksource hpet
[    0.357724] thermal LNXTHERM:01: registered as thermal_zone0
[    0.357756] ACPI: Thermal Zone [TZ00] (34 C)
[    0.368926] isapnp: Scanning for PnP cards...
[    0.375792] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    0.429469] brd: module loaded
[    0.431432] loop: module loaded
[    0.431748] input: Macintosh mouse button emulation as /devices/virtual/input/input4
[    0.436154] ata_piix 0000:00:1f.2: version 2.13
[    0.436200] ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[    0.436212] ata_piix 0000:00:1f.2: MAP [ P0 P2 IDE IDE ]
[    0.436311] ata_piix 0000:00:1f.2: setting latency timer to 64
[    0.439788] scsi0 : ata_piix
[    0.440267] scsi1 : ata_piix
[    0.448890] ata1: SATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14
[    0.448901] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15
[    0.450079] Fixed MDIO Bus: probed
[    0.450189] PPP generic driver version 2.4.2
[    0.450379] tun: Universal TUN/TAP device driver, 1.6
[    0.450387] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[    0.450834] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.450917]   alloc irq_desc for 23 on node -1
[    0.450924]   alloc kstat_irqs on node -1
[    0.450942] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[    0.450975] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[    0.450983] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[    0.451178] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
[    0.451242] ehci_hcd 0000:00:1d.7: debug port 1
[    0.455134] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[    0.464252] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xf7eb7c00
[    0.484660] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[    0.484985] usb usb1: configuration #1 chosen from 1 choice
[    0.485099] hub 1-0:1.0: USB hub found
[    0.485134] hub 1-0:1.0: 8 ports detected
[    0.485343] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    0.485397] uhci_hcd: USB Universal Host Controller Interface driver
[    0.485516] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[    0.485536] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[    0.485544] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[    0.485707] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[    0.485763] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000d400
[    0.486204] usb usb2: configuration #1 chosen from 1 choice
[    0.486311] hub 2-0:1.0: USB hub found
[    0.486343] hub 2-0:1.0: 2 ports detected
[    0.486501] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[    0.486521] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[    0.486529] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[    0.486693] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[    0.486764] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000d480
[    0.487107] usb usb3: configuration #1 chosen from 1 choice
[    0.487213] hub 3-0:1.0: USB hub found
[    0.487247] hub 3-0:1.0: 2 ports detected
[    0.487401]   alloc irq_desc for 18 on node -1
[    0.487409]   alloc kstat_irqs on node -1
[    0.487427] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[    0.487445] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[    0.487456] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[    0.487630] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[    0.487705] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000d800
[    0.493921] usb usb4: configuration #1 chosen from 1 choice
[    0.494032] hub 4-0:1.0: USB hub found
[    0.494067] hub 4-0:1.0: 2 ports detected
[    0.494234] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16
[    0.494257] uhci_hcd 0000:00:1d.3: setting latency timer to 64
[    0.494265] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[    0.494452] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
[    0.494527] uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000d880
[    0.494882] usb usb5: configuration #1 chosen from 1 choice
[    0.495067] hub 5-0:1.0: USB hub found
[    0.495099] hub 5-0:1.0: 2 ports detected
[    0.495429] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[    0.593623] serio: i8042 KBD port at 0x60,0x64 irq 1
[    0.600070] serio: i8042 AUX port at 0x60,0x64 irq 12
[    0.600670] mice: PS/2 mouse device common for all mice
[    0.604629] rtc_cmos 00:03: RTC can wake from S4
[    0.604815] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[    0.604871] rtc0: alarms up to one month, 114 bytes nvram, hpet irqs
[    0.605350] device-mapper: uevent: version 1.0.3
[    0.605837] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com
[    0.607596] device-mapper: multipath: version 1.1.0 loaded
[    0.607607] device-mapper: multipath round-robin: version 1.0.0 loaded
[    0.612793] EISA: Probing bus 0 at eisa.0
[    0.612810] Cannot allocate resource for EISA slot 1
[    0.612815] Cannot allocate resource for EISA slot 2
[    0.612844] EISA: Detected 0 cards.
[    0.613228] cpuidle: using governor ladder
[    0.613383] cpuidle: using governor menu
[    0.614631] TCP cubic registered
[    0.616877] ata1.00: ATA-8: ST9160310AS, 0303, max UDMA/133
[    0.616887] ata1.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 0/32)
[    0.617397] NET: Registered protocol family 10
[    0.619290] lo: Disabled Privacy Extensions
[    0.620273] NET: Registered protocol family 17
[    0.623023] Using IPI No-Shortcut mode
[    0.623434] PM: Resume from disk failed.
[    0.623474] registered taskstats version 1
[    0.624089]   Magic number: 14:151:690
[    0.624202] mem mem: hash matches
[    0.624521] rtc_cmos 00:03: setting system clock to 2010-06-19 15:40:50 UTC (1276962050)
[    0.624532] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    0.624536] EDD information not available.
[    0.632943] ata1.00: configured for UDMA/133
[    0.694639] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input5
[    0.710557] ACPI: Battery Slot [BAT0] (battery present)
[    0.960698] usb 1-8: new high speed USB device using ehci_hcd and address 2
[    1.131857] isapnp: No Plug & Play device found
[    1.132427] scsi 0:0:0:0: Direct-Access     ATA      ST9160310AS      0303 PQ: 0 ANSI: 5
[    1.132932] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    1.133356] sd 0:0:0:0: [sda] 312581808 512-byte logical blocks: (160 GB/149 GiB)
[    1.133698] sd 0:0:0:0: [sda] Write Protect is off
[    1.133709] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    1.133889] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.134745]  sda:
[    1.199134] usb 1-8: configuration #1 chosen from 1 choice
[    1.370453]  sda1 sda2 < sda5 >
[    1.428930] sd 0:0:0:0: [sda] Attached SCSI disk
[    1.504242] Freeing initrd memory: 7780k freed
[    1.511753] Freeing unused kernel memory: 656k freed
[    1.512726] Write protecting the kernel text: 4676k
[    1.512818] Write protecting the kernel read-only data: 1840k
[    1.585414] udev: starting version 151
[    2.428315] ATL1E 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[    2.428345] ATL1E 0000:03:00.0: setting latency timer to 64
[    2.675262] EXT4-fs (sda1): mounted filesystem with ordered data mode
[   13.261925] Adding 2978808k swap on /dev/sda5.  Priority:-1 extents:1 across:2978808k
[   13.428101] udev: starting version 151
[   14.064100] lp: driver loaded but no devices found
[   14.578739] Linux agpgart interface v0.103
[   14.855471] eeepc_laptop: Eee PC Hotkey Driver
[   14.855720] eeepc_laptop: Hotkey init flags 0x41
[   14.856157] eeepc_laptop: TYPE (2000000) not reported by BIOS, enabling anyway
[   14.880532] eeepc_laptop: PANELPOWER (4000000) not reported by BIOS, enabling anyway
[   14.880551] eeepc_laptop: Get control methods supported: 0x6101711
[   14.937319] input: Asus EeePC extra buttons as /devices/platform/eeepc/input/input6
[   15.079317] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input7
[   15.079499] ACPI: Video Device [VGA] (multi-head: yes  rom: no  post: no)
[   15.175839] intel_rng: FWH not detected
[   15.248401] agpgart-intel 0000:00:00.0: Intel 915GM Chipset
[   15.248924] agpgart-intel 0000:00:00.0: detected 7932K stolen memory
[   15.293563] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000
[   15.391675] Linux video capture interface: v2.00
[   15.685523] type=1505 audit(1276954865.559:2):  operation="profile_load" pid=526 name="/sbin/dhclient3"
[   15.687161] type=1505 audit(1276954865.559:3):  operation="profile_load" pid=526 name="/usr/lib/NetworkManager/nm-dhcp-client.action"
[   15.688118] type=1505 audit(1276954865.563:4):  operation="profile_load" pid=526 name="/usr/lib/connman/scripts/dhclient-script"
[   15.732205] cfg80211: Calling CRDA to update world regulatory domain
[   15.930065] cfg80211: World regulatory domain updated:
[   15.930077]     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[   15.930086]     (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   15.930093]     (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   15.930100]     (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   15.930107]     (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   15.930114]     (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   16.035397] psmouse serio1: ID: 10 00 64
[   16.266599] elantech.c: assuming hardware version 2, firmware version 2.48
[   16.344057] elantech.c: Synaptics capabilities query result 0x00, 0x02, 0x64.
[   16.346300] [drm] Initialized drm 1.1.0 20060810
[   16.417651] uvcvideo: Found UVC 1.00 device CNF7129 (04f2:b071)
[   16.470115] input: CNF7129 as /devices/pci0000:00/0000:00:1d.7/usb1/1-8/1-8:1.0/input/input8
[   16.470383] usbcore: registered new interface driver uvcvideo
[   16.470395] USB Video Class driver (v0.1.0)
[   16.669231] input: ETPS/2 Elantech Touchpad as /devices/platform/i8042/serio1/input/input9
[   16.909299] type=1505 audit(1276954866.783:5):  operation="profile_replace" pid=612 name="/sbin/dhclient3"
[   16.910965] type=1505 audit(1276954866.783:6):  operation="profile_replace" pid=612 name="/usr/lib/NetworkManager/nm-dhcp-client.action"
[   16.943111] type=1505 audit(1276954866.815:7):  operation="profile_replace" pid=612 name="/usr/lib/connman/scripts/dhclient-script"
[   17.046633] type=1505 audit(1276954866.919:8):  operation="profile_load" pid=617 name="/usr/bin/evince"
[   17.143573] type=1505 audit(1276954867.015:9):  operation="profile_load" pid=617 name="/usr/bin/evince-previewer"
[   17.161534] type=1505 audit(1276954867.035:10):  operation="profile_load" pid=617 name="/usr/bin/evince-thumbnailer"
[   17.189829] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[   17.189843] i915 0000:00:02.0: setting latency timer to 64
[   17.239556] [drm] set up 7M of stolen space
[   17.352961] type=1505 audit(1276954867.227:11):  operation="profile_load" pid=623 name="/usr/lib/cups/backend/cups-pdf"
[   17.379217] ath5k 0000:01:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[   17.379239] ath5k 0000:01:00.0: setting latency timer to 64
[   17.379325] ath5k 0000:01:00.0: registered as 'phy0'
[   18.017463] composite sync not supported
[   18.019864] [drm] initialized overlay support
[   19.028790] fb0: inteldrmfb frame buffer device
[   19.028799] registered panic notifier
[   19.028820] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[   19.028944] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[   19.029019] HDA Intel 0000:00:1b.0: setting latency timer to 64
[   19.062106] vga16fb: initializing
[   19.062121] vga16fb: mapped to 0xc00a0000
[   19.062133] vga16fb: not registering due to another framebuffer present
[   19.380123] ath: EEPROM regdomain: 0x60
[   19.380130] ath: EEPROM indicates we should expect a direct regpair map
[   19.380141] ath: Country alpha2 being used: 00
[   19.380145] ath: Regpair used: 0x60
[   19.416294] Console: switching to colour frame buffer device 128x37
[   19.501991] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input10
[   19.585952] phy0: Selected rate control algorithm 'minstrel'
[   19.589585] Registered led device: ath5k-phy0::rx
[   19.590046] Registered led device: ath5k-phy0::tx
[   19.590063] ath5k phy0: Atheros AR2425 chip found (MAC: 0xe2, PHY: 0x70)
[   20.204966] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   20.274711] composite sync not supported
[   21.292654] render error detected, EIR: 0x00000010
[   21.292769] page table error
[   21.292827]   PGTBL_ER: 0x00000010
[   21.292896] [drm:i915_handle_error] *ERROR* EIR stuck: 0x00000010, masking
[   21.293046] render error detected, EIR: 0x00000010
[   21.293140] page table error
[   21.293195]   PGTBL_ER: 0x00000010
[   21.800827] ppdev: user-space parallel port driver
[   22.648109] composite sync not supported
[   23.242734] composite sync not supported
[   25.750498] composite sync not supported
[   26.346498] composite sync not supported
[   26.950497] composite sync not supported
[   28.268142]   alloc irq_desc for 27 on node -1
[   28.268151]   alloc kstat_irqs on node -1
[   28.268178] ATL1E 0000:03:00.0: irq 27 for MSI/MSI-X
[   28.269177] ADDRCONF(NETDEV_UP): eth0: link is not ready
[   36.520092] composite sync not supported
[   36.642877] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   37.068460] ATL1E 0000:03:00.0: irq 27 for MSI/MSI-X
[   37.069800] ADDRCONF(NETDEV_UP): eth0: link is not ready
[   37.851363] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   42.988141] wlan0: direct probe to AP 00:1d:6a:a3:e7:2d (try 1)
[   43.188095] wlan0: direct probe to AP 00:1d:6a:a3:e7:2d (try 2)
[   43.388182] wlan0: direct probe to AP 00:1d:6a:a3:e7:2d (try 3)
[   43.588090] wlan0: direct probe to AP 00:1d:6a:a3:e7:2d timed out
[   54.635675] wlan0: direct probe to AP 00:1d:6a:a3:e7:2d (try 1)
[   54.832116] wlan0: direct probe to AP 00:1d:6a:a3:e7:2d (try 2)
[   55.032110] wlan0: direct probe to AP 00:1d:6a:a3:e7:2d (try 3)
[   55.232090] wlan0: direct probe to AP 00:1d:6a:a3:e7:2d timed out
[   66.313724] wlan0: direct probe to AP 00:1d:6a:a3:e7:2d (try 1)
[   66.491331] wlan0: direct probe responded
[   66.491344] wlan0: authenticate with AP 00:1d:6a:a3:e7:2d (try 1)
[   66.688130] wlan0: authenticate with AP 00:1d:6a:a3:e7:2d (try 2)
[   66.816671] wlan0: authenticated
[   66.816742] wlan0: associate with AP 00:1d:6a:a3:e7:2d (try 1)
[   67.016121] wlan0: associate with AP 00:1d:6a:a3:e7:2d (try 2)
[   67.216104] wlan0: associate with AP 00:1d:6a:a3:e7:2d (try 3)
[   67.416119] wlan0: association with AP 00:1d:6a:a3:e7:2d timed out
[   78.010832] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   78.010934] wlan0: direct probe to AP 00:1d:6a:a3:e7:2d (try 1)
[   78.023593] wlan0: deauthenticating from 00:1d:6a:a3:e7:2d by local choice (reason=3)
[   78.023885] wlan0: direct probe to AP 00:1d:6a:a3:e7:2d (try 1)
[   78.024954] wlan0: deauthenticating from 00:1d:6a:a3:e7:2d by local choice (reason=3)
[   78.324506] ATL1E 0000:03:00.0: irq 27 for MSI/MSI-X
[   78.325450] ADDRCONF(NETDEV_UP): eth0: link is not ready
[   82.297677] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   82.297777] wlan0: direct probe to AP 00:1d:6a:a3:e7:2d (try 1)
[   82.496129] wlan0: direct probe to AP 00:1d:6a:a3:e7:2d (try 2)
[   82.696103] wlan0: direct probe to AP 00:1d:6a:a3:e7:2d (try 3)
[   82.896125] wlan0: direct probe to AP 00:1d:6a:a3:e7:2d timed out
[   97.170115] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   97.170213] wlan0: direct probe to AP 00:1d:6a:a3:e7:2d (try 1)
[   97.368072] wlan0: direct probe to AP 00:1d:6a:a3:e7:2d (try 2)
[   97.527267] ATL1E 0000:03:00.0: irq 27 for MSI/MSI-X
[   97.528769] ADDRCONF(NETDEV_UP): eth0: link is not ready
[   97.568092] wlan0: direct probe to AP 00:1d:6a:a3:e7:2d (try 3)
[   97.581284] wlan0: deauthenticating from 00:1d:6a:a3:e7:2d by local choice (reason=3)
[   97.979911] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   97.980052] wlan0: direct probe to AP 00:1d:6a:a3:e7:2d (try 1)
[   98.180092] wlan0: direct probe to AP 00:1d:6a:a3:e7:2d (try 2)
[   98.380094] wlan0: direct probe to AP 00:1d:6a:a3:e7:2d (try 3)
[   98.561984] wlan0: direct probe responded
[   98.561999] wlan0: authenticate with AP 00:1d:6a:a3:e7:2d (try 1)
[   98.760074] wlan0: authenticate with AP 00:1d:6a:a3:e7:2d (try 2)
[   98.960073] wlan0: authenticate with AP 00:1d:6a:a3:e7:2d (try 3)
[   99.160085] wlan0: authentication with AP 00:1d:6a:a3:e7:2d timed out
[  100.864571] wlan0: deauthenticating from 00:1d:6a:a3:e7:2d by local choice (reason=3)
[  100.948712] wlan0: direct probe to AP 00:1d:6a:a3:e7:2d (try 1)
[  101.083926] wlan0: direct probe responded
[  101.083941] wlan0: authenticate with AP 00:1d:6a:a3:e7:2d (try 1)
[  101.280107] wlan0: authenticate with AP 00:1d:6a:a3:e7:2d (try 2)
[  101.480104] wlan0: authenticate with AP 00:1d:6a:a3:e7:2d (try 3)
[  101.680580] wlan0: authentication with AP 00:1d:6a:a3:e7:2d timed out
[  112.750221] wlan0: direct probe to AP 00:1d:6a:a3:e7:2d (try 1)
[  112.948096] wlan0: direct probe to AP 00:1d:6a:a3:e7:2d (try 2)
[  113.103255] wlan0: direct probe responded
[  113.103270] wlan0: authenticate with AP 00:1d:6a:a3:e7:2d (try 1)
[  113.300488] wlan0: authenticate with AP 00:1d:6a:a3:e7:2d (try 2)
[  113.500134] wlan0: authenticate with AP 00:1d:6a:a3:e7:2d (try 3)
[  113.700110] wlan0: authentication with AP 00:1d:6a:a3:e7:2d timed out
[  124.579281] wlan0: direct probe to AP 00:1d:6a:a3:e7:2d (try 1)
[  124.776091] wlan0: direct probe to AP 00:1d:6a:a3:e7:2d (try 2)
[  124.976086] wlan0: direct probe to AP 00:1d:6a:a3:e7:2d (try 3)
[  125.077941] wlan0: direct probe responded
[  125.077955] wlan0: authenticate with AP 00:1d:6a:a3:e7:2d (try 1)
[  125.276132] wlan0: authenticate with AP 00:1d:6a:a3:e7:2d (try 2)
[  125.429365] wlan0: authenticated
[  125.429437] wlan0: associate with AP 00:1d:6a:a3:e7:2d (try 1)
[  125.628094] wlan0: associate with AP 00:1d:6a:a3:e7:2d (try 2)
[  125.828085] wlan0: associate with AP 00:1d:6a:a3:e7:2d (try 3)
[  125.844098] wlan0: RX AssocResp from 00:1d:6a:a3:e7:2d (capab=0x431 status=0 aid=1)
[  125.844110] wlan0: associated
[  125.845886] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[  126.726604] padlock: VIA PadLock not detected.
[  127.013516] __ratelimit: 6 callbacks suppressed
[  127.013526] type=1503 audit(1276954976.887:14):  operation="open" pid=1553 parent=1453 profile="/sbin/dhclient3" requested_mask="r::" denied_mask="r::" fsuid=0 ouid=0 name="/var/lib/wicd/dhclient.conf"
[  136.088070] wlan0: no IPv6 routers present
[  139.856139] ath5k phy0: unsupported jumbo
[  191.073031] ath5k phy0: unsupported jumbo
[  218.428981] ath5k phy0: unsupported jumbo
alfabio@alfabio-laptop:~$

Hors ligne

#21 Le 20/06/2010, à 09:50

Marmounette

Re : [soluce] ath5k, wifi lent, AR5001 et ath5k phy0: unsupported jumbo

Merci !!! Ce sont ces lignes que je voulais voir big_smile :

[  139.856139] ath5k phy0: unsupported jumbo
[  191.073031] ath5k phy0: unsupported jumbo
[  218.428981] ath5k phy0: unsupported jumbo

Je n'ai plus qu'a fouiner smile


Il reste un gnocchi devant mes yeux... Ah non il vient de disparaître ! :D

Hors ligne

#22 Le 20/06/2010, à 09:55

Marmounette

Re : [soluce] ath5k, wifi lent, AR5001 et ath5k phy0: unsupported jumbo

Trouvé big_smile

J'ai trouvé !!!!!

Si t'es un peu doué en anglais, lis cette page et oooooo tu vas reconnaitre ton soucis je pense big_smile

Sinon je te le traduirai vite fait et on fera la soluce proposé ensemble. ok ?

http://ubuntuforums.org/archive/index.php/t-1191178.html


Il reste un gnocchi devant mes yeux... Ah non il vient de disparaître ! :D

Hors ligne

#23 Le 20/06/2010, à 11:47

alfabio

Re : [soluce] ath5k, wifi lent, AR5001 et ath5k phy0: unsupported jumbo

Salut,

J'ai lu vite fait mais je n'ai pas le temps de regarder vraiment aujourd'hui.

C'est bien cette procedure qu'il va falloir que je fasse ?

To install:

1. Download the wireless driver from the Asus site.

2. Create a folder where you would like to keep the driver and unpack it there.

3. Using Synaptic, install ndisgtk and the dependencies it picks for you.

4. Open a terminal window and enter the command "sudo ndisgtk". A Wireless Network Drivers window will appear.

5. Click the Install New Driver button.

6. Navigate through the folders for the driver you downloaded to the ndis5x folder. Select the file "net5211.inf" and then click Install. Ignore the error that comes up about not being able to detect the hardware.

7. Close ndisgkt and then restart the computer.

You should then be able to connect to the network. I get full 54 Mb/s speed with no errors. It occasionally misses connecting on the first try, but it works on a second attempt.

Good luck!


Merci big_smile

Hors ligne

#24 Le 20/06/2010, à 12:38

Marmounette

Re : [soluce] ath5k, wifi lent, AR5001 et ath5k phy0: unsupported jumbo

Oui c'est celle là que j'avais vu vite fait smile et toute la description du probleme avant correspond parfaitement à ton soucis, je pense qu'on peut largement espérer que la connexion tourne parfaitement après celle ci tongue


Il reste un gnocchi devant mes yeux... Ah non il vient de disparaître ! :D

Hors ligne

#25 Le 20/06/2010, à 21:05

alfabio

Re : [soluce] ath5k, wifi lent, AR5001 et ath5k phy0: unsupported jumbo

ALLÉLUIA......:lol:

Un grand merci a Marmounette, pour ton acharnement tongue

Donc pour faire vite....ÇA MARCHE !!!!

Connexion rapide, directe et qui a l'air de durer....

Super cool !

Hors ligne