j ai la connection wifi mais je n arrive pas a avoir internet

titi34mb · Le 19/06/2010, à 18:12

merci de m aider a voir pourquoi sa ne marche pas

kalisto07 · Le 20/06/2010, à 04:35

il te faut donner plus de precision :
est ce que tu vois ton reseaux wifi s'afficher ?
est ce que ta carte wifi est géré par un pilote proprietaire ou a t elle ete fonctionnelle des le départ ?
as tu essayé de te connecter en session live cd si ta carte est prise en compte automatiquement
quel est le model de ta carte wifi ?
quel est la force du signal visible sur le reseaux ?
est ce la premiere fois que tu te connecte en wifi ?
le plus de précision pertinante possible
http://blog.aldevar.fr/?page_id=448

titi34mb · Le 20/06/2010, à 11:52

salut je suis debutant sur ubuntu je viens d installer la version 10.04
oui je vois la connection wifi
si la carte wifi esr géré par un pilote propriétaire je ne sais pas
j ai pas essaye la connection live cd
je pence que c est network
maxi
oui sur ubuntu

toutafai · Le 20/06/2010, à 13:27

Bonjour,

comme tout bon débutant qui se respecte, tu n'as pas lu le post épinglé au début/en haut de la section wifi de ce forum "A lire avant de poster".
Une fois que tu l'aura fait, cela nous aidera beaucoup plus qu'un simple "merci de m aider a voir pourquoi sa ne marche pas"...ben ouais, on a pas de boule de cristal pour deviner ton matériel, ta config, ton probleme...

Dernière modification par toutafai (Le 20/06/2010, à 18:58)

Marmounette · Le 20/06/2010, à 13:36

Si moi je vois très bien le soucis...

Non c'est une blague XD

kalisto07 · Le 20/06/2010, à 14:58

lorsque que tu clic sur ton reseau wifi, la ou il y a l'icone dans la barre des taches (tableau de bord) il te demande la clé wep ?
tu a configuré ton wifi au niveau du routeur ou tu utilise la clé fournit sur le routeur wifi ?

angus34 · Le 20/06/2010, à 16:06

salut titi34! ton pc est bien un hp pavillon dv6?
tape cette commande dans un terminal et copie colle le resultat!
lspci | grep Network
es tu aller voir dans:
Système → Administration → Pilotes de périphériques si tu as un pilote propose pour ta carte wifi?
pour firefox
apt://flashplugin-nonfree

Dernière modification par angus34 (Le 20/06/2010, à 16:12)

titi34mb · Le 20/06/2010, à 16:37

voici ce qui me dit
08:00.0 Network controller: Atheros Communications Inc. AR9285 Wireless Network Adapter (PCI-Express) (rev 01)

angus34 · Le 20/06/2010, à 17:01

as tu installer flash plugin-non free?
regarde sur la doc si ta carte y est !

Dernière modification par angus34 (Le 20/06/2010, à 17:01)

angus34 · Le 20/06/2010, à 17:05

va dans synaptic et installe ce paquet!
linux-backports-modules-wireless-lucid-generic
clique sur ce lien!
http://doc.ubuntu-fr.org/wifi_atheros_ar9285
pense a redemarrer apres !

Dernière modification par angus34 (Le 20/06/2010, à 17:19)

titi34mb · Le 20/06/2010, à 17:46

j ai fait se que tu ma dit et sa marche toujour pas

Marmounette · Le 20/06/2010, à 18:33

Donne le résultat des commandes suivantes :

cat /etc/lsb-release
lsusb
lspci
lspci -nn | grep -i net
sudo lshw -C network
lsmod
iwconfig
ifconfig
sudo iwlist scan

uname -r -m

cat /etc/network/interfaces

nm-tool

toutafai · Le 20/06/2010, à 19:03

Marmounette a écrit :

Donne le résultat des commandes suivantes :
cat /etc/lsb-release
lsusb
lspci
lspci -nn | grep -i net
sudo lshw -C network
lsmod
iwconfig
ifconfig
sudo iwlist scan
uname -r -m
cat /etc/network/interfaces
nm-tool

C'est ce que je lui ai demandé, mais il fait pas l'effort de le faire...par contre toi, tu fait l'effort de lui "macher" le travail...apres faut pas s'ettoner si les gens ne cherche pas un peu par eux meme, résultat on finit par faire de "l'assistanat" sans que les gens apprennent...

Marmounette · Le 20/06/2010, à 19:13

ouip mais bon s'il sait pas cliquer il sait au moins lire

(moi aussi lui avait demandé mais bon ... peut etre qu'il y avait trop de posts de posté ^^ )

Par contre s'il ne le fait pas là, je laisse tomber ><

buntu35 · Le 20/06/2010, à 19:15

+1 @toutafai. Mais tu n'as pas donné le lien qui va bien pour y aller...

si le signal wifi est OK, il se peut qu'il y ait un souci au niveau des iptables qui interdirait les échanges de paquets entre le pc et l'extérieur.

toutafai · Le 20/06/2010, à 19:18

n'abusons pas : il sait forcement lire...seulement c'est bien connu que les utilisateurs ne lisent jamais les informations qu'ils ont devant les yeux et cela , crois moi, je le constate tous les jours depuis 20 ans que je fais de la maintenance informatique

Marmounette · Le 20/06/2010, à 19:21

buntu35 a écrit :

+1 @toutafai. Mais tu n'as pas donné le lien qui va bien pour y aller...
si le signal wifi est OK, il se peut qu'il y ait un souci au niveau des iptables qui interdirait les échanges de paquets entre le pc et l'extérieur.

Moi je ne mise sur rien en bug tant que j'ai pas vu le résultats des commandes ... ya tellement de possibilités ^^

@toutafai : ouip mais deja les gens qui ont choisis ubuntu on fait le petit effort de se pencher sur la question un peu plus que les autres... Et puis moi ça m'occupe quand je ne code pas ou autre

Par contre je préfère largement les gens qui me demandent de leur expliquer les commandes et qui apprennent

buntu35 · Le 20/06/2010, à 19:25

@toutafai :
C'est tout à fait vrai ( jeu de mots maitre capello), le "google est ton ami" n'est pas une légende urbaine...
Le lien dans ta signature est mort ?

toutafai · Le 20/06/2010, à 19:29

@buntu35 : Exact, mais c'était fait express de ne pas donner le lien, mais simplement d'indiquer on on peut le trouver... Donner les informations de diagnostic, c'est quand meme indiqué à 2 endroit : Dans le bandeau "rappel" et en post épinglé.

@marmounette : oui, c'est clair qu'il font un petit effort, mais faire un petit effort ne suffit pas ! il faut consacrer du temps pour apprendre, et c'est en se documentant ou en allant lire ce fameux post dans lequel les explications des commandes y sont aussi donné, que l'on apprend, encore faut-il faire un effort suffisant.
Quand je lit un post dans lequel il y a une simple "ouinnn, ca marche pas" sans donner plus d'info suceeptible d'aider les autres a depanner, j'appelle pas cela un effort...

@titi34mb : y a rien de personnel dans ce que je dit, je reflette simplement le fait que beaucoup trop de personne font la meme "erreur" de ne pas lire les infos, et de demander sans avoir meme pris la peine de cherche un peu

Enfin bref, fin de l'apparté en ce qui me concerne.

Dernière modification par toutafai (Le 20/06/2010, à 19:30)

toutafai · Le 20/06/2010, à 19:34

@buntu35 : désolé, le serveur est en maintenance : le ventil a rendu l'ame après persque 3 ans de 24h/24h 7/7j ....mais bon c'est un simple petit site de prestations informatique ubuntu/Mickeysoft sur le 37..

titi34mb · Le 21/06/2010, à 05:30

bethencourt@bethencourt-laptop:~$ cat/etc/lsb-release
bash: cat/etc/lsb-release: Aucun fichier ou dossier de ce type
bethencourt@bethencourt-laptop:~$ isusb
No command 'isusb' found, did you mean:
Command 'lsusb' from package 'usbutils' (main)
isusb: command not found
bethencourt@bethencourt-laptop:~$ lspci
00:00.0 Host bridge: Advanced Micro Devices [AMD] RS780 Host Bridge Alternate
00:02.0 PCI bridge: Advanced Micro Devices [AMD] RS780 PCI to PCI bridge (ext gfx port 0)
00:04.0 PCI bridge: Advanced Micro Devices [AMD] RS780 PCI to PCI bridge (PCIE port 0)
00:05.0 PCI bridge: Advanced Micro Devices [AMD] RS780 PCI to PCI bridge (PCIE port 1)
00:06.0 PCI bridge: Advanced Micro Devices [AMD] RS780 PCI to PCI bridge (PCIE port 2)
00:0a.0 PCI bridge: Advanced Micro Devices [AMD] RS780 PCI to PCI bridge (PCIE port 5)
00:11.0 SATA controller: ATI Technologies Inc SB700/SB800 SATA Controller [AHCI mode]
00:12.0 USB Controller: ATI Technologies Inc SB700/SB800 USB OHCI0 Controller
00:12.1 USB Controller: ATI Technologies Inc SB700 USB OHCI1 Controller
00:12.2 USB Controller: ATI Technologies Inc SB700/SB800 USB EHCI Controller
00:13.0 USB Controller: ATI Technologies Inc SB700/SB800 USB OHCI0 Controller
00:13.1 USB Controller: ATI Technologies Inc SB700 USB OHCI1 Controller
00:13.2 USB Controller: ATI Technologies Inc SB700/SB800 USB EHCI Controller
00:14.0 SMBus: ATI Technologies Inc SBx00 SMBus Controller (rev 3c)
00:14.2 Audio device: ATI Technologies Inc SBx00 Azalia (Intel HDA)
00:14.3 ISA bridge: ATI Technologies Inc SB700/SB800 LPC host controller
00:14.4 PCI bridge: ATI Technologies Inc SBx00 PCI to PCI Bridge
00:18.0 Host bridge: Advanced Micro Devices [AMD] K10 [Opteron, Athlon64, Sempron] HyperTransport Configuration
00:18.1 Host bridge: Advanced Micro Devices [AMD] K10 [Opteron, Athlon64, Sempron] Address Map
00:18.2 Host bridge: Advanced Micro Devices [AMD] K10 [Opteron, Athlon64, Sempron] DRAM Controller
00:18.3 Host bridge: Advanced Micro Devices [AMD] K10 [Opteron, Athlon64, Sempron] Miscellaneous Control
00:18.4 Host bridge: Advanced Micro Devices [AMD] K10 [Opteron, Athlon64, Sempron] Link Control
01:00.0 VGA compatible controller: ATI Technologies Inc M92 [Mobility Radeon HD 4500 Series]
01:00.1 Audio device: ATI Technologies Inc RV710/730
08:00.0 Network controller: Atheros Communications Inc. AR9285 Wireless Network Adapter (PCI-Express) (rev 01)
09:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 03)
bethencourt@bethencourt-laptop:~$ lspci -nn|greg-i net
greg-i: command not found
bethencourt@bethencourt-laptop:~$ sudo lshw-c network
[sudo] password for bethencourt:
bethencourt@bethencourt-laptop:~$ lsmod
Module Size Used by
ipt_MASQUERADE 1407 1
xt_state 1098 1
ipt_REJECT 1928 2
xt_tcpudp 2011 4
iptable_filter 2271 1
nf_nat_h323 5077 0
nf_conntrack_h323 46926 1 nf_nat_h323
nf_nat_pptp 1920 0
nf_conntrack_pptp 4413 1 nf_nat_pptp
nf_conntrack_proto_gre 4021 1 nf_conntrack_pptp
nf_nat_proto_gre 1259 1 nf_nat_pptp
nf_nat_tftp 716 0
nf_conntrack_tftp 2893 1 nf_nat_tftp
nf_nat_sip 5108 0
nf_conntrack_sip 15389 1 nf_nat_sip
nf_nat_irc 1124 0
nf_conntrack_irc 3332 1 nf_nat_irc
nf_nat_ftp 1836 0
nf_conntrack_ftp 5381 1 nf_nat_ftp
iptable_nat 4414 1
nf_nat 15735 9 ipt_MASQUERADE,nf_nat_h323,nf_nat_pptp,nf_nat_proto_gre,nf_nat_tftp,nf_nat_sip,nf_nat_irc,nf_nat_ftp,iptable_nat
nf_conntrack_ipv4 10672 4 iptable_nat,nf_nat
nf_conntrack 61583 18 ipt_MASQUERADE,xt_state,nf_nat_h323,nf_conntrack_h323,nf_nat_pptp,nf_conntrack_pptp,nf_conntrack_proto_gre,nf_nat_tftp,nf_conntrack_tftp,nf_nat_sip,nf_conntrack_sip,nf_nat_irc,nf_conntrack_irc,nf_nat_ftp,nf_conntrack_ftp,iptable_nat,nf_nat,nf_conntrack_ipv4
nf_defrag_ipv4 1073 1 nf_conntrack_ipv4
ip_tables 9991 2 iptable_filter,iptable_nat
x_tables 14299 6 ipt_MASQUERADE,xt_state,ipt_REJECT,xt_tcpudp,iptable_nat,ip_tables
binfmt_misc 6587 1
ppdev 5259 0
snd_hda_codec_atihdmi 2367 1
snd_hda_codec_idt 51914 1
snd_hda_intel 22005 2
snd_hda_codec 74201 3 snd_hda_codec_atihdmi,snd_hda_codec_idt,snd_hda_intel
snd_hwdep 5412 1 snd_hda_codec
snd_seq_dummy 1338 0
snd_pcm_oss 35308 0
snd_mixer_oss 13746 1 snd_pcm_oss
snd_pcm 70886 3 snd_hda_intel,snd_hda_codec,snd_pcm_oss
snd_seq_oss 26726 0
snd_seq_midi 4557 0
arc4 1153 2
snd_rawmidi 19056 1 snd_seq_midi
snd_seq_midi_event 6003 2 snd_seq_oss,snd_seq_midi
snd_seq 47263 6 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_seq_midi_event
fbcon 35102 71
tileblit 2031 1 fbcon
snd_timer 19098 2 snd_pcm,snd_seq
ath9k 306301 0
font 7557 1 fbcon
snd_seq_device 5700 5 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_rawmidi,snd_seq
joydev 8708 0
snd 54148 16 snd_hda_codec_idt,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_seq_oss,snd_rawmidi,snd_seq,snd_timer,snd_seq_device
bitblit 4707 1 fbcon
mac80211 204922 1 ath9k
ath 7611 1 ath9k
hp_accel 11144 0
soundcore 6620 1 snd
softcursor 1189 1 bitblit
uvcvideo 57022 0
snd_page_alloc 7172 2 snd_hda_intel,snd_pcm
cfg80211 126517 3 ath9k,mac80211,ath
lis3lv02d 6007 1 hp_accel
input_polldev 2482 1 lis3lv02d
videodev 34361 1 uvcvideo
lirc_ene0100 6600 0
vga16fb 11385 1
video 17375 0
i2c_piix4 8527 0
vgastate 8961 1 vga16fb
output 1871 1 video
psmouse 63245 0
led_class 2864 2 ath9k,hp_accel
v4l1_compat 13251 2 uvcvideo,videodev
lirc_dev 8884 1 lirc_ene0100
serio_raw 3978 0
lp 7028 0
parport 32635 2 ppdev,lp
usbhid 36174 0
hid 67032 1 usbhid
r8169 34236 0
mii 4381 1 r8169
ahci 32040 2
bethencourt@bethencourt-laptop:~$ iwconfig
lo no wireless extensions.

eth0 no wireless extensions.

wlan0 IEEE 802.11bgn ESSID:"wifi"
Mode:Ad-Hoc Frequency:2.412 GHz Cell: DE:75:83:EE:E2:F6
Tx-Power=20 dBm
Retry long limit:7 RTS thr:off Fragment thr:off
Power Management:off

bethencourt@bethencourt-laptop:~$ ifconfig
eth0 Link encap:Ethernet HWaddr 00:26:9e:b6:5f:a9
inet adr:192.168.1.75 Bcast:192.168.1.255 Masque:255.255.255.0
adr inet6: fe80::226:9eff:feb6:5fa9/64 Scope:Lien
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
Packets reçus:13959 erreurs:0 :0 overruns:0 frame:0
TX packets:11670 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 lg file transmission:1000
Octets reçus:14704021 (14.7 MB) Octets transmis:1847854 (1.8 MB)
Interruption:30 Adresse de base:0xc000

lo Link encap:Boucle locale
inet adr:127.0.0.1 Masque:255.0.0.0
adr inet6: ::1/128 Scope:Hôte
UP LOOPBACK RUNNING MTU:16436 Metric:1
Packets reçus:268 erreurs:0 :0 overruns:0 frame:0
TX packets:268 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 lg file transmission:0
Octets reçus:20384 (20.3 KB) Octets transmis:20384 (20.3 KB)

wlan0 Link encap:Ethernet HWaddr 0c:60:76:81:15:9c
inet adr:10.42.43.1 Bcast:10.42.43.255 Masque:255.255.255.0
adr inet6: fe80::e60:76ff:fe81:159c/64 Scope:Lien
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
Packets reçus:0 erreurs:0 :0 overruns:0 frame:0
TX packets:17 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 lg file transmission:1000
Octets reçus:0 (0.0 B) Octets transmis:3771 (3.7 KB)

bethencourt@bethencourt-laptop:~$ sudo iwlist scan
[sudo] password for bethencourt:
bethencourt@bethencourt-laptop:~$ uname-r-m
uname-r-m: command not found
bethencourt@bethencourt-laptop:~$ cat /etc/network/interfaces
auto lo
iface lo inet loopback

bethencourt@bethencourt-laptop:~$ nm-tool

NetworkManager Tool

State: connected

- Device: wlan0 [wifi] --------------------------------------------------------
Type: 802.11 WiFi
Driver: ath9k
State: connected
Default: no
HW Address: 0C:60:76:81:15:9C

Capabilities:

Wireless Properties
WEP Encryption: yes
WPA Encryption: yes
WPA2 Encryption: yes

Wireless Access Points (* = current AP)
*wifi: Ad-Hoc, DE:75:83:EE:E2:F6, Freq 2412 MHz, Rate 0 Mb/s, Strength 255 WEP
Livebox-C460: Infra, 00:14:A4:31:93:5E, Freq 2412 MHz, Rate 54 Mb/s, Strength 32 WPA

IPv4 Settings:
Address: 10.42.43.1
Prefix: 24 (255.255.255.0)
Gateway: 0.0.0.0

- Device: eth0 [Auto eth0] ----------------------------------------------------
Type: Wired
Driver: r8169
State: connected
Default: yes
HW Address: 00:26:9E:B6:5F:A9

Capabilities:
Carrier Detect: yes
Speed: 100 Mb/s

Wired Properties
Carrier: on

IPv4 Settings:
Address: 192.168.1.75
Prefix: 24 (255.255.255.0)
Gateway: 192.168.1.1

DNS: 192.168.1.1

bethencourt@bethencourt-laptop:~$

Marmounette · Le 21/06/2010, à 08:42

Bon il n'y a pas de "Capabilities" cette connexion wifi ><

on pourrait avoir "dmesg" aussi en commande ? apres un démarrage/connexion ?

titi34mb · Le 21/06/2010, à 19:09

[ 0.207094] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PB2_._PRT]
[ 0.207176] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PB4_._PRT]
[ 0.207255] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PB5_._PRT]
[ 0.207325] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PB6_._PRT]
[ 0.207403] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PB10._PRT]
[ 0.207537] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P_._PRT]
[ 0.207699] _OSC request failed
[ 0.219051] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
[ 0.219303] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
[ 0.219554] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
[ 0.219668] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
[ 0.219782] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
[ 0.219896] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
[ 0.220163] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
[ 0.220415] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
[ 0.220595] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.220598] vgaarb: loaded
[ 0.220691] SCSI subsystem initialized
[ 0.236079] libata version 3.00 loaded.
[ 0.236158] usbcore: registered new interface driver usbfs
[ 0.236172] usbcore: registered new interface driver hub
[ 0.236191] usbcore: registered new device driver usb
[ 0.236339] ACPI: WMI: Mapper loaded
[ 0.236341] PCI: Using ACPI for IRQ routing
[ 0.236583] NetLabel: Initializing
[ 0.236585] NetLabel: domain hash size = 128
[ 0.236587] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.236598] NetLabel: unlabeled traffic allowed by default
[ 0.236635] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 24, 0
[ 0.236641] hpet0: 4 comparators, 32-bit 14.318180 MHz counter
[ 0.238649] Switching to clocksource tsc
[ 0.238945] AppArmor: AppArmor Filesystem Enabled
[ 0.238945] pnp: PnP ACPI init
[ 0.238945] ACPI: bus type pnp registered
[ 0.240861] alloc irq_desc for 23 on node -1
[ 0.240863] alloc kstat_irqs on node -1
[ 0.240936] pnp: PnP ACPI: found 13 devices
[ 0.240938] ACPI: ACPI bus type pnp unregistered
[ 0.240941] PnPBIOS: Disabled by ACPI PNP
[ 0.240954] system 00:01: iomem range 0xfec00000-0xfec00fff could not be reserved
[ 0.240957] system 00:01: iomem range 0xfee00000-0xfee00fff has been reserved
[ 0.240960] system 00:01: iomem range 0xf7000000-0xf7ffffff has been reserved
[ 0.240969] system 00:09: ioport range 0x400-0x4cf has been reserved
[ 0.240972] system 00:09: ioport range 0x4d0-0x4d1 has been reserved
[ 0.240975] system 00:09: ioport range 0x4d6-0x4d6 has been reserved
[ 0.240978] system 00:09: ioport range 0x680-0x6ff has been reserved
[ 0.240980] system 00:09: ioport range 0x77a-0x77a has been reserved
[ 0.240983] system 00:09: ioport range 0xc00-0xc01 has been reserved
[ 0.240986] system 00:09: ioport range 0xc14-0xc14 has been reserved
[ 0.240989] system 00:09: ioport range 0xc50-0xc52 has been reserved
[ 0.240991] system 00:09: ioport range 0xc6c-0xc6c has been reserved
[ 0.240994] system 00:09: ioport range 0xc6f-0xc6f has been reserved
[ 0.241001] system 00:09: ioport range 0xcd0-0xcdb has been reserved
[ 0.241004] system 00:09: ioport range 0x380-0x387 has been reserved
[ 0.241010] system 00:0a: iomem range 0xe0000-0xfffff could not be reserved
[ 0.241025] system 00:0a: iomem range 0xffe00000-0xffffffff has been reserved
[ 0.276146] pci 0000:01:00.0: BAR 6: no parent found for of device [0xfffe0000-0xffffffff]
[ 0.276151] pci 0000:09:00.0: BAR 6: no parent found for of device [0xffff0000-0xffffffff]
[ 0.276256] pci 0000:00:02.0: PCI bridge, secondary bus 0000:01
[ 0.276259] pci 0000:00:02.0: IO window: 0x7000-0x7fff
[ 0.276262] pci 0000:00:02.0: MEM window: 0xf2300000-0xf23fffff
[ 0.276266] pci 0000:00:02.0: PREFETCH window: 0x000000e0000000-0x000000efffffff
[ 0.276270] pci 0000:00:04.0: PCI bridge, secondary bus 0000:02
[ 0.276273] pci 0000:00:04.0: IO window: 0x3000-0x6fff
[ 0.276276] pci 0000:00:04.0: MEM window: 0xf1300000-0xf22fffff
[ 0.276279] pci 0000:00:04.0: PREFETCH window: 0x000000f0000000-0x000000f0ffffff
[ 0.276283] pci 0000:00:05.0: PCI bridge, secondary bus 0000:08
[ 0.276285] pci 0000:00:05.0: IO window: disabled
[ 0.276288] pci 0000:00:05.0: MEM window: 0xf1200000-0xf12fffff
[ 0.276291] pci 0000:00:05.0: PREFETCH window: disabled
[ 0.276295] pci 0000:00:06.0: PCI bridge, secondary bus 0000:09
[ 0.276298] pci 0000:00:06.0: IO window: 0x2000-0x2fff
[ 0.276301] pci 0000:00:06.0: MEM window: 0xf2500000-0xf25fffff
[ 0.276304] pci 0000:00:06.0: PREFETCH window: 0x000000f1000000-0x000000f10fffff
[ 0.276308] pci 0000:00:0a.0: PCI bridge, secondary bus 0000:0a
[ 0.276309] pci 0000:00:0a.0: IO window: disabled
[ 0.276313] pci 0000:00:0a.0: MEM window: 0xf1100000-0xf11fffff
[ 0.276315] pci 0000:00:0a.0: PREFETCH window: disabled
[ 0.276319] pci 0000:00:14.4: PCI bridge, secondary bus 0000:0b
[ 0.276321] pci 0000:00:14.4: IO window: disabled
[ 0.276391] pci 0000:00:14.4: MEM window: disabled
[ 0.276394] pci 0000:00:14.4: PREFETCH window: disabled
[ 0.276406] alloc irq_desc for 18 on node -1
[ 0.276408] alloc kstat_irqs on node -1
[ 0.276411] pci 0000:00:02.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 0.276415] pci 0000:00:02.0: setting latency timer to 64
[ 0.276420] alloc irq_desc for 16 on node -1
[ 0.276422] alloc kstat_irqs on node -1
[ 0.276425] pci 0000:00:04.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.276428] pci 0000:00:04.0: setting latency timer to 64
[ 0.276433] alloc irq_desc for 17 on node -1
[ 0.276435] alloc kstat_irqs on node -1
[ 0.276438] pci 0000:00:05.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 0.276441] pci 0000:00:05.0: setting latency timer to 64
[ 0.276446] pci 0000:00:06.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 0.276449] pci 0000:00:06.0: setting latency timer to 64
[ 0.276454] pci 0000:00:0a.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 0.276457] pci 0000:00:0a.0: setting latency timer to 64
[ 0.276465] pci_bus 0000:00: resource 0 io: [0x00-0xffff]
[ 0.276468] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff]
[ 0.276471] pci_bus 0000:01: resource 0 io: [0x7000-0x7fff]
[ 0.276473] pci_bus 0000:01: resource 1 mem: [0xf2300000-0xf23fffff]
[ 0.276476] pci_bus 0000:01: resource 2 pref mem [0xe0000000-0xefffffff]
[ 0.276479] pci_bus 0000:02: resource 0 io: [0x3000-0x6fff]
[ 0.276481] pci_bus 0000:02: resource 1 mem: [0xf1300000-0xf22fffff]
[ 0.276484] pci_bus 0000:02: resource 2 pref mem [0xf0000000-0xf0ffffff]
[ 0.276486] pci_bus 0000:08: resource 1 mem: [0xf1200000-0xf12fffff]
[ 0.276489] pci_bus 0000:09: resource 0 io: [0x2000-0x2fff]
[ 0.276491] pci_bus 0000:09: resource 1 mem: [0xf2500000-0xf25fffff]
[ 0.276494] pci_bus 0000:09: resource 2 pref mem [0xf1000000-0xf10fffff]
[ 0.276497] pci_bus 0000:0a: resource 1 mem: [0xf1100000-0xf11fffff]
[ 0.276500] pci_bus 0000:0b: resource 3 io: [0x00-0xffff]
[ 0.276502] pci_bus 0000:0b: resource 4 mem: [0x000000-0xffffffffffffffff]
[ 0.276535] NET: Registered protocol family 2
[ 0.276618] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.276888] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.277421] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.277675] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.277678] TCP reno registered
[ 0.277758] NET: Registered protocol family 1
[ 0.437162] pci 0000:01:00.0: Boot video device
[ 0.437258] Simple Boot Flag at 0x44 set to 0x1
[ 0.437422] cpufreq-nforce2: No nForce2 chipset.
[ 0.437444] Scanning for low memory corruption every 60 seconds
[ 0.437538] audit: initializing netlink socket (disabled)
[ 0.437548] type=2000 audit(1277139529.437:1): initialized
[ 0.446513] highmem bounce pool size: 64 pages
[ 0.446518] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.447731] VFS: Disk quotas dquot_6.5.2
[ 0.447784] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.448260] fuse init (API version 7.13)
[ 0.448330] msgmni has been set to 1628
[ 0.448497] alg: No test for stdrng (krng)
[ 0.448544] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.448547] io scheduler noop registered
[ 0.448548] io scheduler anticipatory registered
[ 0.448550] io scheduler deadline registered
[ 0.448586] io scheduler cfq registered (default)
[ 0.448703] alloc irq_desc for 25 on node -1
[ 0.448705] alloc kstat_irqs on node -1
[ 0.448713] pcieport 0000:00:02.0: irq 25 for MSI/MSI-X
[ 0.448718] pcieport 0000:00:02.0: setting latency timer to 64
[ 0.448794] alloc irq_desc for 26 on node -1
[ 0.448796] alloc kstat_irqs on node -1
[ 0.448800] pcieport 0000:00:04.0: irq 26 for MSI/MSI-X
[ 0.448805] pcieport 0000:00:04.0: setting latency timer to 64
[ 0.448893] alloc irq_desc for 27 on node -1
[ 0.448895] alloc kstat_irqs on node -1
[ 0.448899] pcieport 0000:00:05.0: irq 27 for MSI/MSI-X
[ 0.448904] pcieport 0000:00:05.0: setting latency timer to 64
[ 0.448981] alloc irq_desc for 28 on node -1
[ 0.448982] alloc kstat_irqs on node -1
[ 0.448986] pcieport 0000:00:06.0: irq 28 for MSI/MSI-X
[ 0.448991] pcieport 0000:00:06.0: setting latency timer to 64
[ 0.449080] alloc irq_desc for 29 on node -1
[ 0.449082] alloc kstat_irqs on node -1
[ 0.449086] pcieport 0000:00:0a.0: irq 29 for MSI/MSI-X
[ 0.449091] pcieport 0000:00:0a.0: setting latency timer to 64
[ 0.449146] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.449255] _OSC request failed
[ 0.449355] _OSC request failed
[ 0.449373] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.449779] Freeing initrd memory: 7725k freed
[ 0.449982] ACPI: AC Adapter [ACAD] (on-line)
[ 0.450050] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[ 0.450054] ACPI: Power Button [PWRB]
[ 0.450093] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1
[ 0.450095] ACPI: Sleep Button [SLPB]
[ 0.450158] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input2
[ 0.450609] ACPI: Lid Switch [LID]
[ 0.450690] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[ 0.450694] ACPI: Power Button [PWRF]
[ 0.451198] ACPI: processor limited to max C-state 1
[ 0.451221] processor LNXCPU:00: registered as cooling_device0
[ 0.451252] processor LNXCPU:01: registered as cooling_device1
[ 0.454413] ACPI Exception: AE_OK, No or invalid critical threshold (20090903/thermal-386)
[ 0.454664] isapnp: Scanning for PnP cards...
[ 0.455786] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.456832] brd: module loaded
[ 0.457218] loop: module loaded
[ 0.457298] input: Macintosh mouse button emulation as /devices/virtual/input/input4
[ 0.457664] Fixed MDIO Bus: probed
[ 0.457693] PPP generic driver version 2.4.2
[ 0.457722] tun: Universal TUN/TAP device driver, 1.6
[ 0.457724] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 0.457792] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.457877] ehci_hcd 0000:00:12.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 0.457893] ehci_hcd 0000:00:12.2: setting latency timer to 64
[ 0.457897] ehci_hcd 0000:00:12.2: EHCI Host Controller
[ 0.457925] ehci_hcd 0000:00:12.2: new USB bus registered, assigned bus number 1
[ 0.457956] ehci_hcd 0000:00:12.2: debug port 1
[ 0.457976] ehci_hcd 0000:00:12.2: irq 17, io mem 0xf2408500
[ 0.469004] ehci_hcd 0000:00:12.2: USB 2.0 started, EHCI 1.00
[ 0.469112] usb usb1: configuration #1 chosen from 1 choice
[ 0.469138] hub 1-0:1.0: USB hub found
[ 0.469146] hub 1-0:1.0: 6 ports detected
[ 0.469273] alloc irq_desc for 19 on node -1
[ 0.469276] alloc kstat_irqs on node -1
[ 0.469281] ehci_hcd 0000:00:13.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 0.469299] ehci_hcd 0000:00:13.2: setting latency timer to 64
[ 0.469302] ehci_hcd 0000:00:13.2: EHCI Host Controller
[ 0.469332] ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 2
[ 0.469360] ehci_hcd 0000:00:13.2: debug port 1
[ 0.469381] ehci_hcd 0000:00:13.2: irq 19, io mem 0xf2408400
[ 0.477411] ACPI: Battery Slot [BAT0] (battery present)
[ 0.481065] ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00
[ 0.481174] usb usb2: configuration #1 chosen from 1 choice
[ 0.481198] hub 2-0:1.0: USB hub found
[ 0.481217] hub 2-0:1.0: 6 ports detected
[ 0.481277] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.481295] ohci_hcd 0000:00:12.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.481315] ohci_hcd 0000:00:12.0: setting latency timer to 64
[ 0.481318] ohci_hcd 0000:00:12.0: OHCI Host Controller
[ 0.481348] ohci_hcd 0000:00:12.0: new USB bus registered, assigned bus number 3
[ 0.481375] ohci_hcd 0000:00:12.0: irq 16, io mem 0xf2407000
[ 0.541151] usb usb3: configuration #1 chosen from 1 choice
[ 0.541176] hub 3-0:1.0: USB hub found
[ 0.541261] hub 3-0:1.0: 3 ports detected
[ 0.541317] ohci_hcd 0000:00:12.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.541335] ohci_hcd 0000:00:12.1: setting latency timer to 64
[ 0.541339] ohci_hcd 0000:00:12.1: OHCI Host Controller
[ 0.541368] ohci_hcd 0000:00:12.1: new USB bus registered, assigned bus number 4
[ 0.541389] ohci_hcd 0000:00:12.1: irq 16, io mem 0xf2406000
[ 0.601130] usb usb4: configuration #1 chosen from 1 choice
[ 0.601154] hub 4-0:1.0: USB hub found
[ 0.601234] hub 4-0:1.0: 3 ports detected
[ 0.601285] ohci_hcd 0000:00:13.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 0.601305] ohci_hcd 0000:00:13.0: setting latency timer to 64
[ 0.601308] ohci_hcd 0000:00:13.0: OHCI Host Controller
[ 0.601337] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 5
[ 0.601365] ohci_hcd 0000:00:13.0: irq 18, io mem 0xf2405000
[ 0.661128] usb usb5: configuration #1 chosen from 1 choice
[ 0.661153] hub 5-0:1.0: USB hub found
[ 0.661238] hub 5-0:1.0: 3 ports detected
[ 0.661289] ohci_hcd 0000:00:13.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 0.661307] ohci_hcd 0000:00:13.1: setting latency timer to 64
[ 0.661310] ohci_hcd 0000:00:13.1: OHCI Host Controller
[ 0.661342] ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 6
[ 0.661363] ohci_hcd 0000:00:13.1: irq 18, io mem 0xf2404000
[ 0.721093] usb usb6: configuration #1 chosen from 1 choice
[ 0.721118] hub 6-0:1.0: USB hub found
[ 0.721130] hub 6-0:1.0: 3 ports detected
[ 0.721187] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.721256] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 0.746230] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.746235] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.746331] mice: PS/2 mouse device common for all mice
[ 0.747717] rtc_cmos 00:05: RTC can wake from S4
[ 0.747751] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
[ 0.747775] rtc0: alarms up to one day, 114 bytes nvram, hpet irqs
[ 0.747864] device-mapper: uevent: version 1.0.3
[ 0.747958] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com
[ 0.748015] device-mapper: multipath: version 1.1.0 loaded
[ 0.748017] device-mapper: multipath round-robin: version 1.0.0 loaded
[ 0.748111] EISA: Probing bus 0 at eisa.0
[ 0.748122] Cannot allocate resource for EISA slot 2
[ 0.748124] Cannot allocate resource for EISA slot 3
[ 0.748126] Cannot allocate resource for EISA slot 4
[ 0.748128] Cannot allocate resource for EISA slot 5
[ 0.748129] Cannot allocate resource for EISA slot 6
[ 0.748131] Cannot allocate resource for EISA slot 7
[ 0.748133] Cannot allocate resource for EISA slot 8
[ 0.748135] EISA: Detected 0 cards.
[ 0.748189] cpuidle: using governor ladder
[ 0.748190] cpuidle: using governor menu
[ 0.748586] TCP cubic registered
[ 0.748708] NET: Registered protocol family 10
[ 0.749111] lo: Disabled Privacy Extensions
[ 0.749401] NET: Registered protocol family 17
[ 0.749427] powernow-k8: Found 1 AMD Athlon(tm) II Dual-Core M320 processors (2 cpu cores) (version 2.20.00)
[ 0.749463] powernow-k8: 0 : pstate 0 (2100 MHz)
[ 0.749465] powernow-k8: 1 : pstate 1 (1500 MHz)
[ 0.749467] powernow-k8: 2 : pstate 2 (800 MHz)
[ 0.765453] Using IPI No-Shortcut mode
[ 0.765539] PM: Resume from disk failed.
[ 0.765552] registered taskstats version 1
[ 0.765989] Magic number: 14:716:995
[ 0.766076] rtc_cmos 00:05: setting system clock to 2010-06-21 16:58:50 UTC (1277139530)
[ 0.766079] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 0.766081] EDD information not available.
[ 0.768925] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input5
[ 0.809302] usb 1-3: new high speed USB device using ehci_hcd and address 2
[ 0.860400] isapnp: No Plug & Play device found
[ 0.860447] Freeing unused kernel memory: 672k freed
[ 0.860726] Write protecting the kernel text: 4828k
[ 0.860786] Write protecting the kernel read-only data: 1876k
[ 0.880077] udev: starting version 151
[ 0.935925] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 0.935949] r8169 0000:09:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 0.935991] r8169 0000:09:00.0: setting latency timer to 64
[ 0.936025] alloc irq_desc for 30 on node -1
[ 0.936027] alloc kstat_irqs on node -1
[ 0.936043] r8169 0000:09:00.0: irq 30 for MSI/MSI-X
[ 0.936644] eth0: RTL8168d/8111d at 0xf8298000, 00:26:9e:b6:5f:a9, XID 081000c0 IRQ 30
[ 0.956497] ahci 0000:00:11.0: version 3.0
[ 0.956515] alloc irq_desc for 22 on node -1
[ 0.956518] alloc kstat_irqs on node -1
[ 0.956525] ahci 0000:00:11.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 0.956638] ahci 0000:00:11.0: AHCI 0001.0100 32 slots 3 ports 3 Gbps 0x7 impl SATA mode
[ 0.956642] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part ccc sxs
[ 0.980487] scsi0 : ahci
[ 0.993675] scsi1 : ahci
[ 1.006514] scsi2 : ahci
[ 1.006587] ata1: SATA max UDMA/133 abar m1024@0xf2408000 port 0xf2408100 irq 22
[ 1.006592] ata2: SATA max UDMA/133 abar m1024@0xf2408000 port 0xf2408180 irq 22
[ 1.006596] ata3: SATA max UDMA/133 abar m1024@0xf2408000 port 0xf2408200 irq 22
[ 1.012560] usb 1-3: configuration #1 chosen from 1 choice
[ 1.280144] ata3: SATA link down (SStatus 0 SControl 300)
[ 1.332138] usb 4-3: new low speed USB device using ohci_hcd and address 2
[ 1.428146] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.428176] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.430219] ata1.00: ATA-8: ST9500420AS, 0006HPM1, max UDMA/100
[ 1.430223] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 1.432861] ata1.00: configured for UDMA/100
[ 1.444642] ata2.00: ATAPI: hp DVD RW AD-7561S, AH73, max UDMA/100, ATAPI AN
[ 1.448226] scsi 0:0:0:0: Direct-Access ATA ST9500420AS 0006 PQ: 0 ANSI: 5
[ 1.448388] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 1.448464] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[ 1.448500] sd 0:0:0:0: [sda] Write Protect is off
[ 1.448503] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.448522] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.448624] sda:
[ 1.463226] ata2.00: configured for UDMA/100
[ 1.467421] sda1 sda2 <
[ 1.483927] scsi 1:0:0:0: CD-ROM hp DVD RW AD-7561S AH73 PQ: 0 ANSI: 5
[ 1.498204] sda5 >
[ 1.498347] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 1.498352] Uniform CD-ROM driver Revision: 3.20
[ 1.498485] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 1.498521] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.498543] sr 1:0:0:0: Attached scsi generic sg1 type 5
[ 1.505245] usb 4-3: configuration #1 chosen from 1 choice
[ 1.520354] usbcore: registered new interface driver hiddev
[ 1.524340] input: PIXART USB OPTICAL MOUSE as /devices/pci0000:00/0000:00:12.1/usb4/4-3/4-3:1.0/input/input6
[ 1.524428] generic-usb 0003:093A:2510.0001: input,hidraw0: USB HID v1.11 Mouse [PIXART USB OPTICAL MOUSE] on usb-0000:00:12.1-3/input0
[ 1.524454] usbcore: registered new interface driver usbhid
[ 1.524456] usbhid: v2.6:USB HID core driver
[ 1.885026] EXT4-fs (sda1): mounted filesystem with ordered data mode
[ 11.086593] udev: starting version 151
[ 11.090587] Adding 10578936k swap on /dev/sda5. Priority:-1 extents:1 across:10578936k
[ 11.287355] type=1505 audit(1277139541.017:2): operation="profile_load" pid=585 name="/sbin/dhclient3"
[ 11.287620] type=1505 audit(1277139541.017:3): operation="profile_load" pid=585 name="/usr/lib/NetworkManager/nm-dhcp-client.action"
[ 11.287767] type=1505 audit(1277139541.017:4): operation="profile_load" pid=585 name="/usr/lib/connman/scripts/dhclient-script"
[ 11.389724] lirc_dev: IR Remote Control driver registered, major 61
[ 11.415926] lirc_dev: lirc_register_driver: sample_rate: 0
[ 11.416100] enecir: unknown ENE chip detected, assuming KB3926D
[ 11.416102] enecir: driver support incomplete
[ 11.416104] enecir: chip is 0x3926 - 0x00, 0xd2
[ 11.416112] enecir: hardware features:
[ 11.416114] enecir: learning and tx off, gpio40_learn off, fan_in off
[ 11.416116] enecir: driver has been succesfully loaded
[ 11.443608] lis3lv02d: laptop model unknown, using default axes configuration
[ 11.444421] lis3lv02d: 1-byte sensor found
[ 11.454311] input: ST LIS3LV02DL Accelerometer as /devices/platform/lis3lv02d/input/input7
[ 11.454402] Registered led device: hp::hddprotect
[ 11.454415] lis3lv02d driver loaded.
[ 11.495765] Linux video capture interface: v2.00
[ 11.536464] cfg80211: Calling CRDA to update world regulatory domain
[ 11.554390] acpi device:09: registered as cooling_device2
[ 11.554875] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:06/LNXVIDEO:01/input/input8
[ 11.554980] ACPI: Video Device [DVGA] (multi-head: yes rom: no post: no)
[ 11.561135] cfg80211: World regulatory domain updated:
[ 11.561138] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 11.561142] (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 11.561145] (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 11.561148] (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 11.561150] (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 11.561152] (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 11.609937] uvcvideo: Found UVC 1.00 device HP Webcam (0408:03f1)
[ 11.633070] ACPI: resource piix4_smbus [0xb00-0xb07] conflicts with ACPI region SMBI [0xb00-0xb0f]
[ 11.633073] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 11.638203] input: HP Webcam as /devices/pci0000:00/0000:00:12.2/usb1/1-3/1-3:1.0/input/input9
[ 11.638333] usbcore: registered new interface driver uvcvideo
[ 11.638522] USB Video Class driver (v0.1.0)
[ 11.699522] lp: driver loaded but no devices found
[ 11.700987] vga16fb: initializing
[ 11.700991] vga16fb: mapped to 0xc00a0000
[ 11.701304] fb0: VGA16 VGA frame buffer device
[ 11.833093] ath9k 0000:08:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 11.833104] ath9k 0000:08:00.0: setting latency timer to 64
[ 11.882205] ath: EEPROM regdomain: 0x6a
[ 11.882207] ath: EEPROM indicates we should expect a direct regpair map
[ 11.882211] ath: Country alpha2 being used: 00
[ 11.882212] ath: Regpair used: 0x6a
[ 11.993593] Console: switching to colour frame buffer device 80x30
[ 12.006154] phy0: Selected rate control algorithm 'ath9k_rate_control'
[ 12.006856] Registered led device: ath9k-phy0::radio
[ 12.006871] Registered led device: ath9k-phy0::assoc
[ 12.006885] Registered led device: ath9k-phy0::tx
[ 12.006899] Registered led device: ath9k-phy0::rx
[ 12.006909] phy0: Atheros AR9285 MAC/BB Rev:2 AR5133 RF Rev:e0: mem=0xf88a0000, irq=17
[ 12.133351] HDA Intel 0000:00:14.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 12.133385] HDA Intel 0000:00:14.2: setting latency timer to 64
[ 12.156473] type=1505 audit(1277139541.889:5): operation="profile_load" pid=878 name="/usr/share/gdm/guest-session/Xsession"
[ 12.166520] type=1505 audit(1277139541.897:6): operation="profile_replace" pid=882 name="/sbin/dhclient3"
[ 12.176013] type=1505 audit(1277139541.905:7): operation="profile_replace" pid=882 name="/usr/lib/NetworkManager/nm-dhcp-client.action"
[ 12.176251] type=1505 audit(1277139541.909:8): operation="profile_replace" pid=882 name="/usr/lib/connman/scripts/dhclient-script"
[ 12.189472] type=1505 audit(1277139541.921:9): operation="profile_load" pid=888 name="/usr/bin/evince"
[ 12.215230] type=1505 audit(1277139541.945:10): operation="profile_load" pid=888 name="/usr/bin/evince-previewer"
[ 12.217763] type=1505 audit(1277139541.950:11): operation="profile_load" pid=888 name="/usr/bin/evince-thumbnailer"
[ 12.240349] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 12.249334] r8169: eth0: link down
[ 12.249537] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 12.292922] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:14.2/input/input10
[ 12.304825] input: HDA ATI SB Mic at Ext Front Jack as /devices/pci0000:00/0000:00:14.2/sound/card0/input11
[ 12.305016] input: HDA ATI SB Line Out at Ext Front Jack as /devices/pci0000:00/0000:00:14.2/sound/card0/input12
[ 12.306351] HDA Intel 0000:01:00.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 12.306383] HDA Intel 0000:01:00.1: setting latency timer to 64
[ 12.487096] Synaptics Touchpad, model: 1, fw: 6.5, id: 0x1c0b1, caps: 0xa04751/0xa00000
[ 12.581054] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input13
[ 12.588642] ppdev: user-space parallel port driver
[ 16.828864] hda-intel: IRQ timing workaround is activated for card #1. Suggest a bigger bdl_pos_adj.
[ 26.023245] __ratelimit: 9 callbacks suppressed
[ 26.023250] cairo-dock[1418]: segfault at 18 ip b74e62be sp bfbfb1d8 error 4 in libGL.so.1.2[b74a2000+a7000]
[ 34.816141] wlan0: Creating new IBSS network, BSSID 8a:53:83:bb:41:67
[ 35.895948] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 35.917460] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[ 35.917919] CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use
[ 35.917922] nf_conntrack.acct=1 kernel parameter, acct=1 nf_conntrack module option or
[ 35.917924] sysctl net.netfilter.nf_conntrack_acct=1 to enable it.
[ 37.428029] wlan0: no IPv6 routers present
[ 77.502898] r8169: eth0: link up
[ 77.503411] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 87.937132] eth0: no IPv6 routers present
[ 334.989180] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge)
[ 394.988216] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge)
[ 455.000052] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge)
[ 515.000135] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge)
[ 575.000232] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge)
bethencourt@bethencourt-laptop:~$

Marmounette · Le 21/06/2010, à 20:32

Le soucis est là :

  IPv4 Settings:
    Address:         10.42.43.1
    Prefix:          24 (255.255.255.0)
    Gateway:         0.0.0.0

Gateway 0.0.0.0 --> pas possible normalement il commencerait par 10.42.43.*** d'après l'IP ensuite il n'y a pas de DNS ... Ca me parait très bizarre. T'as fait quoi pour définir ta connexion ? T'as essayé de définir en IP fixe au lieu de cocher la case "mode itinérant" ??

Et connecte toi sans avoir le filiaire en meme tps, c'est mieux.

Dernière modification par Marmounette (Le 21/06/2010, à 20:32)

titi34mb · Le 21/06/2010, à 21:14

j ai mis mon numero de cle web et le mode itinérant je le trouve ou

Ubuntu-fr

Navigation

Liens de recherche

Annonce

#1 Le 19/06/2010, à 18:12

j ai la connection wifi mais je n arrive pas a avoir internet

#2 Le 20/06/2010, à 04:35

Re : j ai la connection wifi mais je n arrive pas a avoir internet

#3 Le 20/06/2010, à 11:52

Re : j ai la connection wifi mais je n arrive pas a avoir internet

#4 Le 20/06/2010, à 13:27

Re : j ai la connection wifi mais je n arrive pas a avoir internet

#5 Le 20/06/2010, à 13:36

Re : j ai la connection wifi mais je n arrive pas a avoir internet

#6 Le 20/06/2010, à 14:58

Re : j ai la connection wifi mais je n arrive pas a avoir internet

#7 Le 20/06/2010, à 16:06

Re : j ai la connection wifi mais je n arrive pas a avoir internet

#8 Le 20/06/2010, à 16:37

Re : j ai la connection wifi mais je n arrive pas a avoir internet

#9 Le 20/06/2010, à 17:01

Re : j ai la connection wifi mais je n arrive pas a avoir internet

#10 Le 20/06/2010, à 17:05

Re : j ai la connection wifi mais je n arrive pas a avoir internet

#11 Le 20/06/2010, à 17:46

Re : j ai la connection wifi mais je n arrive pas a avoir internet

#12 Le 20/06/2010, à 18:33

Re : j ai la connection wifi mais je n arrive pas a avoir internet

#13 Le 20/06/2010, à 19:03

Re : j ai la connection wifi mais je n arrive pas a avoir internet

#14 Le 20/06/2010, à 19:13

Re : j ai la connection wifi mais je n arrive pas a avoir internet

#15 Le 20/06/2010, à 19:15

Re : j ai la connection wifi mais je n arrive pas a avoir internet

#16 Le 20/06/2010, à 19:18

Re : j ai la connection wifi mais je n arrive pas a avoir internet

#17 Le 20/06/2010, à 19:21

Re : j ai la connection wifi mais je n arrive pas a avoir internet

#18 Le 20/06/2010, à 19:25

Re : j ai la connection wifi mais je n arrive pas a avoir internet

#19 Le 20/06/2010, à 19:29

Re : j ai la connection wifi mais je n arrive pas a avoir internet

#20 Le 20/06/2010, à 19:34

Re : j ai la connection wifi mais je n arrive pas a avoir internet

#21 Le 21/06/2010, à 05:30

Re : j ai la connection wifi mais je n arrive pas a avoir internet

#22 Le 21/06/2010, à 08:42

Re : j ai la connection wifi mais je n arrive pas a avoir internet

#23 Le 21/06/2010, à 19:09

Re : j ai la connection wifi mais je n arrive pas a avoir internet

#24 Le 21/06/2010, à 20:32

Re : j ai la connection wifi mais je n arrive pas a avoir internet

#25 Le 21/06/2010, à 21:14

Re : j ai la connection wifi mais je n arrive pas a avoir internet

Pied de page des forums