[Résolu] HP 1018 impos. à redémarrer qd bac d'alimentation vide

coyote34 · Le 11/08/2010, à 18:21

voila URI : hp:/usb/HP_LaserJet_1018?serial=KP338R3

Krisss · Le 11/08/2010, à 18:29

Alors l'URI est le bon, pour le driver il faudra réessayer plus tard, cela provient sans doutes d'une surcharge réseau ...

--Voir message #38 pour corriger ce bug qui ne provient pas du réseau ...-- Krisss

Peux-tu lancer en commande: hp-check -t

et me reporter le résultat, normalement ce driver est capital pour la suite, mais on peut quand même essayer ...

Dernière modification par Krisss (Le 12/08/2010, à 17:37)

coyote34 · Le 11/08/2010, à 18:33

hp-check -t

HP Linux Imaging and Printing System (ver. 3.10.2)
Dependency/Version Check Utility ver. 14.3

Copyright (c) 2001-9 Hewlett-Packard Development Company, LP
This software comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to distribute it
under certain conditions. See COPYING file for more details.

Note: hp-check can be run in three modes:
1. Compile-time check mode (-c or --compile): Use this mode before compiling the
HPLIP supplied tarball (.tar.gz or .run) to determine if the proper dependencies
are installed to successfully compile HPLIP.                                    
2. Run-time check mode (-r or --run): Use this mode to determine if a distro    
supplied package (.deb, .rpm, etc) or an already built HPLIP supplied tarball   
has the proper dependencies installed to successfully run.                      
3. Both compile- and run-time check mode (-b or --both) (Default): This mode    
will check both of the above cases (both compile- and run-time dependencies).   

Saving output in log file: hp-check.log

Initializing. Please wait...
 
---------------
| SYSTEM INFO |
---------------

Basic system information:
Linux estelleluis 2.6.32-24-generic #39-Ubuntu SMP Wed Jul 28 05:14:15 UTC 2010 x86_64 GNU/Linux

Distribution:
ubuntu 10.04

Checking Python version...
OK, version 2.6.5 installed

Checking PyQt 4.x version...
OK, version 4.7.2 installed.

Checking for CUPS...
Status: le programmateur s’exécute
Version: 1.4.3
error_log is set to level: warn

Checking for dbus/python-dbus...
dbus daemon is running.
python-dbus version: 0.83.0


------------------------------------
| COMPILE AND RUNTIME DEPENDENCIES |
------------------------------------

note: To check for compile-time only dependencies, re-run hp-check with the -c parameter (ie, hp-check -c).
note: To check for run-time only dependencies, re-run hp-check with the -r parameter (ie, hp-check -r).

Checking for dependency: CUPS - Common Unix Printing System...
OK, found.

Checking for dependency: CUPS devel- Common Unix Printing System development files...
OK, found.

Checking for dependency: CUPS image - CUPS image development files...
error: NOT FOUND! This is a REQUIRED/COMPILE TIME ONLY dependency. Please make sure that this dependency is installed before installing or running HPLIP.
To install this dependency, execute this command:
sudo aptitude install --assume-yes libcupsimage2-dev

Checking for dependency: DBus - Message bus system...
error: NOT FOUND! This is a REQUIRED dependency. Please make sure that this dependency is installed before installing or running HPLIP.
To install this dependency, execute this command:
sudo aptitude install --assume-yes libdbus-1-dev

Checking for dependency: gcc - GNU Project C and C++ Compiler...
error: NOT FOUND! This is a REQUIRED/COMPILE TIME ONLY dependency. Please make sure that this dependency is installed before installing or running HPLIP.
To install this dependency, execute this command:
sudo aptitude install --assume-yes build-essential

Checking for dependency: GhostScript - PostScript and PDF language interpreter and previewer...
OK, found.

Checking for dependency: libcrypto - OpenSSL cryptographic library...
OK, found.

Checking for dependency: libjpeg - JPEG library...
error: NOT FOUND! This is a REQUIRED dependency. Please make sure that this dependency is installed before installing or running HPLIP.
To install this dependency, execute this command:
sudo aptitude install --assume-yes libjpeg62-dev

Checking for dependency: libnetsnmp-devel - SNMP networking library development files...
error: NOT FOUND! This is a REQUIRED dependency. Please make sure that this dependency is installed before installing or running HPLIP.
To install this dependency, execute this command:
sudo aptitude install --assume-yes libsnmp-dev

Checking for dependency: libpthread - POSIX threads library...
OK, found.

Checking for dependency: libtool - Library building support services...
error: NOT FOUND! This is a REQUIRED/COMPILE TIME ONLY dependency. Please make sure that this dependency is installed before installing or running HPLIP.
To install this dependency, execute this command:
sudo aptitude install --assume-yes libtool

Checking for dependency: libusb - USB library...
error: NOT FOUND! This is a REQUIRED dependency. Please make sure that this dependency is installed before installing or running HPLIP.
To install this dependency, execute this command:
sudo aptitude install --assume-yes libusb-dev

Checking for dependency: make - GNU make utility to maintain groups of programs...
OK, found.

Checking for dependency: PIL - Python Imaging Library (required for commandline scanning with hp-scan)...
OK, found.

Checking for dependency: PolicyKit - Administrative policy framework...
OK, found.

Checking for dependency: PyQt 4 DBus - DBus Support for PyQt4...
OK, found.

Checking for dependency: Python DBus - Python bindings for DBus...
OK, found.

Checking for dependency: Python devel - Python development files...
error: NOT FOUND! This is a REQUIRED/COMPILE TIME ONLY dependency. Please make sure that this dependency is installed before installing or running HPLIP.
To install this dependency, execute this command:
sudo aptitude install --assume-yes python-dev

Checking for dependency: Python libnotify - Python bindings for the libnotify Desktop notifications...
OK, found.

Checking for dependency: Python XML libraries...
OK, found.

Checking for dependency: Python 2.3 or greater - Required for fax functionality...
OK, found.

Checking for dependency: Python 2.2 or greater - Python programming language...
OK, found.

Checking for dependency: Reportlab - PDF library for Python...
OK, found.

Checking for dependency: SANE - Scanning library...
OK, found.

Checking for dependency: SANE - Scanning library development files...
error: NOT FOUND! This is a REQUIRED/COMPILE TIME ONLY dependency. Please make sure that this dependency is installed before installing or running HPLIP.
To install this dependency, execute this command:
sudo aptitude install --assume-yes libsane-dev

Checking for dependency: scanimage - Shell scanning program...
OK, found.

Checking for dependency: xsane - Graphical scanner frontend for SANE...
OK, found.


----------------------
| HPLIP INSTALLATION |
----------------------


Currently installed HPLIP version...
HPLIP 3.10.2 currently installed in '/usr/share/hplip'.

Current contents of '/etc/hp/hplip.conf' file:
# hplip.conf.  Generated from hplip.conf.in by configure.

[hplip]
version=3.10.2

[dirs]
home=/usr/share/hplip
run=/var/run
ppd=/usr/share/ppd/hplip/HP
ppdbase=/usr/share/ppd/hplip
doc=/usr/share/doc/hplip-doc/HTML
icon=no
cupsbackend=/usr/lib/cups/backend
cupsfilter=/usr/lib/cups/filter
drv=/usr/share/cups/drv

# Following values are determined at configure time and cannot be changed.
[configure]
network-build=yes
pp-build=yes
gui-build=yes
scanner-build=yes
fax-build=yes
dbus-build=yes
cups11-build=no
doc-build=yes
shadow-build=no
hpijs-install=yes
foomatic-drv-install=yes
foomatic-ppd-install=yes
foomatic-rip-hplip-install=no
hpcups-install=yes
cups-drv-install=yes
cups-ppd-install=no
internal-tag=3.10.2rc1.9
restricted-build=no
ui-toolkit=qt4
qt3=no
qt4=yes
policy-kit=yes
hpijs-only-build=no
lite-build=no
udev-acl-rules=yes
hpcups-only-build=no
hpijs-only-build=no


Current contents of '/var/lib/hp/hplip.state' file:
# hplip.state - HPLIP runtime persistent variables. 

[plugin]
installed=0
eula=0



Current contents of '~/.hplip/hplip.conf' file:
[last_used]
printer_name = 
working_dir = .
device_uri = "hp:/usb/HP_LaserJet_1018?serial=KP338R3"

[commands]
scan = /usr/bin/simple-scan %SANE_URI%

[installation]
date_time = 11/08/2010 18:31:08
version = 3.10.2rc1.9

[settings]
systray_messages = 0
systray_visible = 2

[fax]
email_address = 
voice_phone = 

[refresh]
rate = 10
enable = true
type = 2

[polling]
enable = false
device_list = 
interval = 5



--------------------------
| DISCOVERED USB DEVICES |
--------------------------

  Device URI                        Model           
  --------------------------------  ----------------
  hp:/usb/HP_LaserJet_1018?serial=  HP LaserJet 1018
  KP338R3                                           

---------------------------------
| INSTALLED CUPS PRINTER QUEUES |
---------------------------------

 
HP-LaserJet-1018 
------------------
Type: Printer
Device URI: hp:/usb/HP_LaserJet_1018?serial=KP338R3
error: Required plug-in status: Not installed
Communication status: Good


----------------------
| SANE CONFIGURATION |
----------------------

'hpaio' in '/etc/sane.d/dll.conf'...
'hpaio' in '/etc/sane.d/dll.d/hplip'...
OK, found. SANE backend 'hpaio' is properly set up.

Checking output of 'scanimage -L'...
 
No scanners were identified. If you were expecting something different,
check that the scanner is plugged in, turned on and detected by the
sane-find-scanner tool (if appropriate). Please read the documentation
which came with this software (README, FAQ, manpages).


---------------------
| PYTHON EXTENSIONS |
---------------------

Checking 'cupsext' CUPS extension...
OK, found.

Checking 'pcardext' Photocard extension...
OK, found.

Checking 'hpmudext' I/O extension...
OK, found.

Checking 'scanext' SANE scanning extension...
OK, found.


 
-----------------
| USB I/O SETUP |
-----------------

Checking for permissions of USB attached printers...

HP Device 0x4117 at 001:012: 
    Device URI: hp:/usb/HP_LaserJet_1018?serial=KP338R3
    Device node: /dev/bus/usb/001/012
    Mode: 0664

---------------
| USER GROUPS |
---------------

estelleluis adm dialout cdrom plugdev lpadmin admin sambashare

error: User needs to be member of group 'lp' to enable print, scan & fax.
User member of group 'lpadmin'.

-----------
| SUMMARY |
-----------

error: 10 errors and/or warnings.

Summary of needed commands to run to satisfy missing dependencies:
sudo aptitude install --assume-yes libcupsimage2-dev
sudo aptitude install --assume-yes libdbus-1-dev
sudo aptitude install --assume-yes build-essential
sudo aptitude install --assume-yes libjpeg62-dev
sudo aptitude install --assume-yes libsnmp-dev
sudo aptitude install --assume-yes libtool
sudo aptitude install --assume-yes libusb-dev
sudo aptitude install --assume-yes python-dev
sudo aptitude install --assume-yes libsane-dev

Please refer to the installation instructions at:
http://hplip.sourceforge.net/install/index.html


Done.
estelleluis@estelleluis:~$ python-dbus version: 0.83.0
b
python-dbus: command not found
estelleluis@estelleluis:~$ 
estelleluis@estelleluis:~$ 
estelleluis@estelleluis:~$ ------------------------------------
S
------------------------------------: command not found
estelleluis@estelleluis:~$ | COMPILE AND RUNTIME DEPENDENCIES |
bash: Erreur de syntaxe près du symbole inattendu « | »
estelleluis@estelleluis:~$ ------------------------------------
 
------------------------------------: command not found
estelleluis@estelleluis:~$ 
estelleluis@estelleluis:~$ note: To check for compile-time only dependencies, re-run hp-check with the -c parameter (ie, hp-check -c).
bash: Erreur de syntaxe près du symbole inattendu « ( »
estelleluis@estelleluis:~$ note: To check for run-time only dependencies, re-run hp-check with the -r parameter (ie, hp-check -r).
bash: Erreur de syntaxe près du symbole inattendu « ( »
estelleluis@estelleluis:~$ 
estelleluis@estelleluis:~$ Checking for dependency: CUPS - Common Unix Printing System...
:
Checking: command not found
estelleluis@estelleluis:~$ OK, found.
.
OK,: command not found
estelleluis@estelleluis:~$ 
estelleluis@estelleluis:~$ Checking for dependency: CUPS devel- Common Unix Printing System development files...

Checking: command not found
estelleluis@estelleluis:~$ OK, found.
-
OK,: command not found
estelleluis@estelleluis:~$ 
estelleluis@estelleluis:~$ Checking for dependency: CUPS image - CUPS image development files...
P
Checking: command not found
estelleluis@estelleluis:~$ error: NOT FOUND! This is a REQUIRED/COMPILE TIME ONLY dependency. Please make sure that this dependency is installed before installing or running HPLIP.
o
error:: command not found
estelleluis@estelleluis:~$ To install this dependency, execute this command:
h
To: command not found
estelleluis@estelleluis:~$ sudo aptitude install --assume-yes libcupsimage2-dev
[sudo] password for estelleluis: 
Sorry, try again.
[sudo] password for estelleluis: 
E: Impossible de verrouiller /var/lib/dpkg/lock - open (11: Ressource temporairement non disponible)
E: Impossible de verrouiller le répertoire d'administration (/var/lib/dpkg/). Il est possible qu'un autre processus l'utilise.
Lecture des listes de paquets... Fait
Construction de l'arbre des dépendances       
Lecture des informations d'état... Fait
Lecture de l'information d'état étendu      
Initialisation de l'état des paquets... Fait
E: Impossible de verrouiller /var/lib/dpkg/lock - open (11: Ressource temporairement non disponible)
E: Impossible de verrouiller le répertoire d'administration (/var/lib/dpkg/). Il est possible qu'un autre processus l'utilise.

Krisss · Le 11/08/2010, à 18:41

OK, alors ajouter l'autorisation du groupe lp

sudo adduser estelleluis lp

Ensuite manque des dépendances ...

sudo aptitude install --assume-yes libcupsimage2-dev libdbus-1-dev build-essential libjpeg62-dev libsnmp-dev libtool libusb-dev python-dev libsane-dev

Puis relancer: hp-check -t

Krisss · Le 11/08/2010, à 18:59

Alors je vais manger et reviens plus tard si jamais ...

Une fois ceci exécuté, lance en commande: hp-testpage

Donne le retour en console et si ton imprimante répond, tu devrais voir aussi apparaitre un petit icône bleu qui est le HP Device Manager, double-clique dessus pour voir les fonctions ...

Il ne te restera plus qu'à télécharger ce driver, fais plusieurs essais à des intervalles différents ....

Alors a+ en bon appétit

coyote34 · Le 11/08/2010, à 21:37

Désolé de répondre seulement maintenant j'ai été invité au resto par la belle mère, je pouvais pas refusé!!!:D

Voila il y a encore 1 erreur après le hp-check -t

estelleluis@estelleluis:~$ hp-check -t

HP Linux Imaging and Printing System (ver. 3.10.2)
Dependency/Version Check Utility ver. 14.3

Copyright (c) 2001-9 Hewlett-Packard Development Company, LP
This software comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to distribute it
under certain conditions. See COPYING file for more details.

Note: hp-check can be run in three modes:
1. Compile-time check mode (-c or --compile): Use this mode before compiling the
HPLIP supplied tarball (.tar.gz or .run) to determine if the proper dependencies
are installed to successfully compile HPLIP.                                    
2. Run-time check mode (-r or --run): Use this mode to determine if a distro    
supplied package (.deb, .rpm, etc) or an already built HPLIP supplied tarball   
has the proper dependencies installed to successfully run.                      
3. Both compile- and run-time check mode (-b or --both) (Default): This mode    
will check both of the above cases (both compile- and run-time dependencies).   

Saving output in log file: hp-check.log

Initializing. Please wait...
 
---------------
| SYSTEM INFO |
---------------

Basic system information:
Linux estelleluis 2.6.32-24-generic #39-Ubuntu SMP Wed Jul 28 05:14:15 UTC 2010 x86_64 GNU/Linux

Distribution:
ubuntu 10.04

Checking Python version...
OK, version 2.6.5 installed

Checking PyQt 4.x version...
OK, version 4.7.2 installed.

Checking for CUPS...
Status: le programmateur s’exécute
Version: 1.4.3
error_log is set to level: warn

Checking for dbus/python-dbus...
dbus daemon is running.
python-dbus version: 0.83.0


------------------------------------
| COMPILE AND RUNTIME DEPENDENCIES |
------------------------------------

note: To check for compile-time only dependencies, re-run hp-check with the -c parameter (ie, hp-check -c).
note: To check for run-time only dependencies, re-run hp-check with the -r parameter (ie, hp-check -r).

Checking for dependency: CUPS - Common Unix Printing System...
OK, found.

Checking for dependency: CUPS devel- Common Unix Printing System development files...
OK, found.

Checking for dependency: CUPS image - CUPS image development files...
OK, found.

Checking for dependency: DBus - Message bus system...
OK, found.

Checking for dependency: gcc - GNU Project C and C++ Compiler...
OK, found.

Checking for dependency: GhostScript - PostScript and PDF language interpreter and previewer...
OK, found.

Checking for dependency: libcrypto - OpenSSL cryptographic library...
OK, found.

Checking for dependency: libjpeg - JPEG library...
OK, found.

Checking for dependency: libnetsnmp-devel - SNMP networking library development files...
OK, found.

Checking for dependency: libpthread - POSIX threads library...
OK, found.

Checking for dependency: libtool - Library building support services...
OK, found.

Checking for dependency: libusb - USB library...
OK, found.

Checking for dependency: make - GNU make utility to maintain groups of programs...
OK, found.

Checking for dependency: PIL - Python Imaging Library (required for commandline scanning with hp-scan)...
OK, found.

Checking for dependency: PolicyKit - Administrative policy framework...
OK, found.

Checking for dependency: PyQt 4 DBus - DBus Support for PyQt4...
OK, found.

Checking for dependency: Python DBus - Python bindings for DBus...
OK, found.

Checking for dependency: Python devel - Python development files...
OK, found.

Checking for dependency: Python libnotify - Python bindings for the libnotify Desktop notifications...
OK, found.

Checking for dependency: Python XML libraries...
OK, found.

Checking for dependency: Python 2.3 or greater - Required for fax functionality...
OK, found.

Checking for dependency: Python 2.2 or greater - Python programming language...
OK, found.

Checking for dependency: Reportlab - PDF library for Python...
OK, found.

Checking for dependency: SANE - Scanning library...
OK, found.

Checking for dependency: SANE - Scanning library development files...
OK, found.

Checking for dependency: scanimage - Shell scanning program...
OK, found.

Checking for dependency: xsane - Graphical scanner frontend for SANE...
OK, found.


----------------------
| HPLIP INSTALLATION |
----------------------


Currently installed HPLIP version...
HPLIP 3.10.2 currently installed in '/usr/share/hplip'.

Current contents of '/etc/hp/hplip.conf' file:
# hplip.conf.  Generated from hplip.conf.in by configure.

[hplip]
version=3.10.2

[dirs]
home=/usr/share/hplip
run=/var/run
ppd=/usr/share/ppd/hplip/HP
ppdbase=/usr/share/ppd/hplip
doc=/usr/share/doc/hplip-doc/HTML
icon=no
cupsbackend=/usr/lib/cups/backend
cupsfilter=/usr/lib/cups/filter
drv=/usr/share/cups/drv

# Following values are determined at configure time and cannot be changed.
[configure]
network-build=yes
pp-build=yes
gui-build=yes
scanner-build=yes
fax-build=yes
dbus-build=yes
cups11-build=no
doc-build=yes
shadow-build=no
hpijs-install=yes
foomatic-drv-install=yes
foomatic-ppd-install=yes
foomatic-rip-hplip-install=no
hpcups-install=yes
cups-drv-install=yes
cups-ppd-install=no
internal-tag=3.10.2rc1.9
restricted-build=no
ui-toolkit=qt4
qt3=no
qt4=yes
policy-kit=yes
hpijs-only-build=no
lite-build=no
udev-acl-rules=yes
hpcups-only-build=no
hpijs-only-build=no


Current contents of '/var/lib/hp/hplip.state' file:
# hplip.state - HPLIP runtime persistent variables. 

[plugin]
installed=0
eula=0



Current contents of '~/.hplip/hplip.conf' file:
[last_used]
printer_name = 
working_dir = .
device_uri = "hp:/usb/HP_LaserJet_1018?serial=KP338R3"

[commands]
scan = /usr/bin/simple-scan %SANE_URI%

[installation]
version = 3.10.2rc1.9
date_time = 11/08/2010 21:35:07

[settings]
systray_messages = 0
systray_visible = 2

[fax]
email_address = 
voice_phone = 

[refresh]
rate = 10
enable = true
type = 2

[polling]
enable = false
device_list = 
interval = 5



--------------------------
| DISCOVERED USB DEVICES |
--------------------------

  Device URI                        Model           
  --------------------------------  ----------------
  hp:/usb/HP_LaserJet_1018?serial=  HP LaserJet 1018
  KP338R3                                           

---------------------------------
| INSTALLED CUPS PRINTER QUEUES |
---------------------------------

 
HP-LaserJet-1018 
------------------
Type: Printer
Device URI: hp:/usb/HP_LaserJet_1018?serial=KP338R3
error: Required plug-in status: Not installed
Communication status: Good


----------------------
| SANE CONFIGURATION |
----------------------

'hpaio' in '/etc/sane.d/dll.conf'...
'hpaio' in '/etc/sane.d/dll.d/hplip'...
OK, found. SANE backend 'hpaio' is properly set up.

Checking output of 'scanimage -L'...
 
No scanners were identified. If you were expecting something different,
check that the scanner is plugged in, turned on and detected by the
sane-find-scanner tool (if appropriate). Please read the documentation
which came with this software (README, FAQ, manpages).


---------------------
| PYTHON EXTENSIONS |
---------------------

Checking 'cupsext' CUPS extension...
OK, found.

Checking 'pcardext' Photocard extension...
OK, found.

Checking 'hpmudext' I/O extension...
OK, found.

Checking 'scanext' SANE scanning extension...
OK, found.


 
-----------------
| USB I/O SETUP |
-----------------

Checking for permissions of USB attached printers...

HP Device 0x4117 at 001:012: 
    Device URI: hp:/usb/HP_LaserJet_1018?serial=KP338R3
    Device node: /dev/bus/usb/001/012
    Mode: 0664

---------------
| USER GROUPS |
---------------

estelleluis adm dialout cdrom plugdev lpadmin admin sambashare

error: User needs to be member of group 'lp' to enable print, scan & fax.
User member of group 'lpadmin'.

-----------
| SUMMARY |
-----------

error: 1 error or warning.

Please refer to the installation instructions at:
http://hplip.sourceforge.net/install/index.html


Done.

Krisss · Le 11/08/2010, à 21:44

Ah ben il y a des choses qu'il ne faut pas rater

Il te faut encore ajouter les droits du groupe lp (LP) avec

sudo adduser estelleluis lp

relance ensuite

hp-check -t

ainsi que

hp-testpage

et dis si elle te sort la page d'impression ...

ainsi que si tu vois l'icône hp (HP Device Manager), double-clique dessus ...

coyote34 · Le 11/08/2010, à 21:50

Pour sudo adduser estelleluis lp c'est fait par contre hp-check -t toujours 1 erreur
Mais sinon la page de test sort bien mais pas contre pas d'icone HP afficher
Je la trouve dans systeme-preference/hplib toolbox et par contre le plugins ne veut pas s'installer, rien à faire

Krisss · Le 11/08/2010, à 22:03

C'est quelle erreur que tu as ?

coyote34 · Le 11/08/2010, à 22:06

Toujours pareil comme quoi estelleluis ne fait pas partie du groupe je te renvoie le code

estelleluis@estelleluis:~$ sudo adduser estelleluis lp 
[sudo] password for estelleluis: 
The user `estelleluis' is already a member of `lp'

estelleluis@estelleluis:~$ hp-check -t

HP Linux Imaging and Printing System (ver. 3.10.2)
Dependency/Version Check Utility ver. 14.3

Copyright (c) 2001-9 Hewlett-Packard Development Company, LP
This software comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to distribute it
under certain conditions. See COPYING file for more details.

Note: hp-check can be run in three modes:
1. Compile-time check mode (-c or --compile): Use this mode before compiling the
HPLIP supplied tarball (.tar.gz or .run) to determine if the proper dependencies
are installed to successfully compile HPLIP.                                    
2. Run-time check mode (-r or --run): Use this mode to determine if a distro    
supplied package (.deb, .rpm, etc) or an already built HPLIP supplied tarball   
has the proper dependencies installed to successfully run.                      
3. Both compile- and run-time check mode (-b or --both) (Default): This mode    
will check both of the above cases (both compile- and run-time dependencies).   

Saving output in log file: hp-check.log

Initializing. Please wait...
 
---------------
| SYSTEM INFO |
---------------

Basic system information:
Linux estelleluis 2.6.32-24-generic #39-Ubuntu SMP Wed Jul 28 05:14:15 UTC 2010 x86_64 GNU/Linux

Distribution:
ubuntu 10.04

Checking Python version...
OK, version 2.6.5 installed

Checking PyQt 4.x version...
OK, version 4.7.2 installed.

Checking for CUPS...
Status: le programmateur s’exécute
Version: 1.4.3
error_log is set to level: warn

Checking for dbus/python-dbus...
dbus daemon is running.
python-dbus version: 0.83.0


------------------------------------
| COMPILE AND RUNTIME DEPENDENCIES |
------------------------------------

note: To check for compile-time only dependencies, re-run hp-check with the -c parameter (ie, hp-check -c).
note: To check for run-time only dependencies, re-run hp-check with the -r parameter (ie, hp-check -r).

Checking for dependency: CUPS - Common Unix Printing System...
OK, found.

Checking for dependency: CUPS devel- Common Unix Printing System development files...
OK, found.

Checking for dependency: CUPS image - CUPS image development files...
OK, found.

Checking for dependency: DBus - Message bus system...
OK, found.

Checking for dependency: gcc - GNU Project C and C++ Compiler...
OK, found.

Checking for dependency: GhostScript - PostScript and PDF language interpreter and previewer...
OK, found.

Checking for dependency: libcrypto - OpenSSL cryptographic library...
OK, found.

Checking for dependency: libjpeg - JPEG library...
OK, found.

Checking for dependency: libnetsnmp-devel - SNMP networking library development files...
OK, found.

Checking for dependency: libpthread - POSIX threads library...
OK, found.

Checking for dependency: libtool - Library building support services...
OK, found.

Checking for dependency: libusb - USB library...
OK, found.

Checking for dependency: make - GNU make utility to maintain groups of programs...
OK, found.

Checking for dependency: PIL - Python Imaging Library (required for commandline scanning with hp-scan)...
OK, found.

Checking for dependency: PolicyKit - Administrative policy framework...
OK, found.

Checking for dependency: PyQt 4 DBus - DBus Support for PyQt4...
OK, found.

Checking for dependency: Python DBus - Python bindings for DBus...
OK, found.

Checking for dependency: Python devel - Python development files...
OK, found.

Checking for dependency: Python libnotify - Python bindings for the libnotify Desktop notifications...
OK, found.

Checking for dependency: Python XML libraries...
OK, found.

Checking for dependency: Python 2.3 or greater - Required for fax functionality...
OK, found.

Checking for dependency: Python 2.2 or greater - Python programming language...
OK, found.

Checking for dependency: Reportlab - PDF library for Python...
OK, found.

Checking for dependency: SANE - Scanning library...
OK, found.

Checking for dependency: SANE - Scanning library development files...
OK, found.

Checking for dependency: scanimage - Shell scanning program...
OK, found.

Checking for dependency: xsane - Graphical scanner frontend for SANE...
OK, found.


----------------------
| HPLIP INSTALLATION |
----------------------


Currently installed HPLIP version...
HPLIP 3.10.2 currently installed in '/usr/share/hplip'.

Current contents of '/etc/hp/hplip.conf' file:
# hplip.conf.  Generated from hplip.conf.in by configure.

[hplip]
version=3.10.2

[dirs]
home=/usr/share/hplip
run=/var/run
ppd=/usr/share/ppd/hplip/HP
ppdbase=/usr/share/ppd/hplip
doc=/usr/share/doc/hplip-doc/HTML
icon=no
cupsbackend=/usr/lib/cups/backend
cupsfilter=/usr/lib/cups/filter
drv=/usr/share/cups/drv

# Following values are determined at configure time and cannot be changed.
[configure]
network-build=yes
pp-build=yes
gui-build=yes
scanner-build=yes
fax-build=yes
dbus-build=yes
cups11-build=no
doc-build=yes
shadow-build=no
hpijs-install=yes
foomatic-drv-install=yes
foomatic-ppd-install=yes
foomatic-rip-hplip-install=no
hpcups-install=yes
cups-drv-install=yes
cups-ppd-install=no
internal-tag=3.10.2rc1.9
restricted-build=no
ui-toolkit=qt4
qt3=no
qt4=yes
policy-kit=yes
hpijs-only-build=no
lite-build=no
udev-acl-rules=yes
hpcups-only-build=no
hpijs-only-build=no


Current contents of '/var/lib/hp/hplip.state' file:
# hplip.state - HPLIP runtime persistent variables. 

[plugin]
installed=0
eula=0



Current contents of '~/.hplip/hplip.conf' file:
[last_used]
printer_name = HP-LaserJet-1018
working_dir = .
device_uri = "hp:/usb/HP_LaserJet_1018?serial=KP338R3"

[commands]
scan = /usr/bin/simple-scan %SANE_URI%

[installation]
version = 3.10.2rc1.9
date_time = 11/08/2010 22:05:39

[settings]
systray_messages = 0
systray_visible = 2

[fax]
email_address = 
voice_phone = 

[refresh]
rate = 10
enable = true
type = 2

[polling]
enable = false
device_list = 
interval = 5



--------------------------
| DISCOVERED USB DEVICES |
--------------------------

  Device URI                        Model           
  --------------------------------  ----------------
  hp:/usb/HP_LaserJet_1018?serial=  HP LaserJet 1018
  KP338R3                                           

---------------------------------
| INSTALLED CUPS PRINTER QUEUES |
---------------------------------

 
HP-LaserJet-1018 
------------------
Type: Printer
Device URI: hp:/usb/HP_LaserJet_1018?serial=KP338R3
error: Required plug-in status: Not installed
Communication status: Good


----------------------
| SANE CONFIGURATION |
----------------------

'hpaio' in '/etc/sane.d/dll.conf'...
'hpaio' in '/etc/sane.d/dll.d/hplip'...
OK, found. SANE backend 'hpaio' is properly set up.

Checking output of 'scanimage -L'...
 
No scanners were identified. If you were expecting something different,
check that the scanner is plugged in, turned on and detected by the
sane-find-scanner tool (if appropriate). Please read the documentation
which came with this software (README, FAQ, manpages).


---------------------
| PYTHON EXTENSIONS |
---------------------

Checking 'cupsext' CUPS extension...
OK, found.

Checking 'pcardext' Photocard extension...
OK, found.

Checking 'hpmudext' I/O extension...
OK, found.

Checking 'scanext' SANE scanning extension...
OK, found.


 
-----------------
| USB I/O SETUP |
-----------------

Checking for permissions of USB attached printers...

HP Device 0x4117 at 001:012: 
    Device URI: hp:/usb/HP_LaserJet_1018?serial=KP338R3
    Device node: /dev/bus/usb/001/012
    Mode: 0664

---------------
| USER GROUPS |
---------------

estelleluis adm dialout cdrom plugdev lpadmin admin sambashare

error: User needs to be member of group 'lp' to enable print, scan & fax.
User member of group 'lpadmin'.

-----------
| SUMMARY |
-----------

error: 1 error or warning.

Please refer to the installation instructions at:
http://hplip.sourceforge.net/install/index.html

Krisss · Le 11/08/2010, à 22:10

Alors pour le plugin, lance en commande

hp-plugin

Puis si tu arrives à le télécharger, tu redémarre ta machine et tu relances

hp-check -t

Et tu me reportes le résultat

coyote34 · Le 11/08/2010, à 22:17

voici les images

?img=1281557558.png
?img=1281557654.png
?img=1281557687.png
?img=1281557718.png

Voila j'essaie les commande de suite...
Le commande me donne les images que je viens d'envoyer mais même résultat il veut pas le télécharger et l'installer

Krisss · Le 11/08/2010, à 22:29

Alors si jamais pour les images, clique sur la balise juste au dessus Img et place ton url image au milieu ...

Je pense que tu as cliqué la case "I agree" en bas de la licence ...

peux-tu me donner le retour de: cat /var/log/cups/error_log

et réessayer avec: sudo hp-plugin

coyote34 · Le 11/08/2010, à 22:50

estelleluis@estelleluis:~$ cat /var/log/cups/error_log
E [11/Aug/2010:10:54:41 +0200] Unable to remove temporary file "/var/spool/cups/tmp/.hplip" - Is a directory
E [11/Aug/2010:17:03:25 +0200] Unable to remove temporary file "/var/spool/cups/tmp/.hplip" - Is a directory
D [11/Aug/2010:17:14:07 +0200] [Job 14] The following messages were recorded from 17:14:01 to 17:14:07
D [11/Aug/2010:17:14:07 +0200] [Job 14] Adding start banner page "none".
D [11/Aug/2010:17:14:07 +0200] [Job 14] Queued on "HP-LaserJet-1018" by "estelleluis".
D [11/Aug/2010:17:14:07 +0200] [Job 14] Auto-typing file...
D [11/Aug/2010:17:14:07 +0200] [Job 14] Request file type is application/postscript.
D [11/Aug/2010:17:14:07 +0200] [Job 14] File of type application/postscript queued by "estelleluis".
D [11/Aug/2010:17:14:07 +0200] [Job 14] Adding end banner page "none".
D [11/Aug/2010:17:14:07 +0200] [Job 14] job-sheets=none,none
D [11/Aug/2010:17:14:07 +0200] [Job 14] argv[0]="HP-LaserJet-1018"
D [11/Aug/2010:17:14:07 +0200] [Job 14] argv[1]="14"
D [11/Aug/2010:17:14:07 +0200] [Job 14] argv[2]="estelleluis"
D [11/Aug/2010:17:14:07 +0200] [Job 14] argv[3]="Sans nom 1"
D [11/Aug/2010:17:14:07 +0200] [Job 14] argv[4]="1"
D [11/Aug/2010:17:14:07 +0200] [Job 14] argv[5]="InputSlot=Auto PageSize=A4 job-uuid=urn:uuid:750a62d2-cc57-32ee-5d11-2d24d6cd2f65 job-originating-host-name=localhost"
D [11/Aug/2010:17:14:07 +0200] [Job 14] argv[6]="/var/spool/cups/d00014-001"
D [11/Aug/2010:17:14:07 +0200] [Job 14] envp[0]="CUPS_CACHEDIR=/var/cache/cups"
D [11/Aug/2010:17:14:07 +0200] [Job 14] envp[1]="CUPS_DATADIR=/usr/share/cups"
D [11/Aug/2010:17:14:07 +0200] [Job 14] envp[2]="CUPS_DOCROOT=/usr/share/cups/doc-root"
D [11/Aug/2010:17:14:07 +0200] [Job 14] envp[3]="CUPS_FONTPATH=/usr/share/cups/fonts"
D [11/Aug/2010:17:14:07 +0200] [Job 14] envp[4]="CUPS_REQUESTROOT=/var/spool/cups"
D [11/Aug/2010:17:14:07 +0200] [Job 14] envp[5]="CUPS_SERVERBIN=/usr/lib/cups"
D [11/Aug/2010:17:14:07 +0200] [Job 14] envp[6]="CUPS_SERVERROOT=/etc/cups"
D [11/Aug/2010:17:14:07 +0200] [Job 14] envp[7]="CUPS_STATEDIR=/var/run/cups"
D [11/Aug/2010:17:14:07 +0200] [Job 14] envp[8]="HOME=/var/spool/cups/tmp"
D [11/Aug/2010:17:14:07 +0200] [Job 14] envp[9]="PATH=/usr/lib/cups/filter:/usr/bin:/usr/sbin:/bin:/usr/bin"
D [11/Aug/2010:17:14:07 +0200] [Job 14] envp[10]="SERVER_ADMIN=root@estelleluis"
D [11/Aug/2010:17:14:07 +0200] [Job 14] envp[11]="SOFTWARE=CUPS/1.4.3"
D [11/Aug/2010:17:14:07 +0200] [Job 14] envp[12]="TMPDIR=/var/spool/cups/tmp"
D [11/Aug/2010:17:14:07 +0200] [Job 14] envp[13]="TZ=Europe/Paris"
D [11/Aug/2010:17:14:07 +0200] [Job 14] envp[14]="USER=root"
D [11/Aug/2010:17:14:07 +0200] [Job 14] envp[15]="CUPS_SERVER=/var/run/cups/cups.sock"
D [11/Aug/2010:17:14:07 +0200] [Job 14] envp[16]="CUPS_ENCRYPTION=IfRequested"
D [11/Aug/2010:17:14:07 +0200] [Job 14] envp[17]="IPP_PORT=631"
D [11/Aug/2010:17:14:07 +0200] [Job 14] envp[18]="CHARSET=utf-8"
D [11/Aug/2010:17:14:07 +0200] [Job 14] envp[19]="LANG=fr_FR.UTF-8"
D [11/Aug/2010:17:14:07 +0200] [Job 14] envp[20]="PPD=/etc/cups/ppd/HP-LaserJet-1018.ppd"
D [11/Aug/2010:17:14:07 +0200] [Job 14] envp[21]="RIP_MAX_CACHE=1014979k"
D [11/Aug/2010:17:14:07 +0200] [Job 14] envp[22]="CONTENT_TYPE=application/postscript"
D [11/Aug/2010:17:14:07 +0200] [Job 14] envp[23]="DEVICE_URI=hp:/usb/HP_LaserJet_1018?serial=KP338R3"
D [11/Aug/2010:17:14:07 +0200] [Job 14] envp[24]="PRINTER_INFO=Hewlett-Packard HP LaserJet 1018"
D [11/Aug/2010:17:14:07 +0200] [Job 14] envp[25]="PRINTER_LOCATION=estelleluis"
D [11/Aug/2010:17:14:07 +0200] [Job 14] envp[26]="PRINTER=HP-LaserJet-1018"
D [11/Aug/2010:17:14:07 +0200] [Job 14] envp[27]="CUPS_FILETYPE=document"
D [11/Aug/2010:17:14:07 +0200] [Job 14] envp[28]="FINAL_CONTENT_TYPE=printer/HP-LaserJet-1018"
D [11/Aug/2010:17:14:07 +0200] [Job 14] Started filter /usr/lib/cups/filter/pstopdf (PID 2636)
D [11/Aug/2010:17:14:07 +0200] [Job 14] Started filter /usr/lib/cups/filter/pdftopdf (PID 2637)
D [11/Aug/2010:17:14:07 +0200] [Job 14] Started filter /usr/lib/cups/filter/foomatic-rip (PID 2638)
D [11/Aug/2010:17:14:07 +0200] [Job 14] Started backend /usr/lib/cups/backend/hp (PID 2639)
D [11/Aug/2010:17:14:07 +0200] [Job 14] pstopdf 6 args: 14 estelleluis Sans nom 1 1 InputSlot=Auto PageSize=A4 job-uuid=urn:uuid:750a62d2-cc57-32ee-5d11-2d24d6cd2f65 job-originating-host-name=localhost /var/spool/cups/d00014-001
D [11/Aug/2010:17:14:07 +0200] [Job 14] PPD: /etc/cups/ppd/HP-LaserJet-1018.ppd
D [11/Aug/2010:17:14:07 +0200] [Job 14] Resolution: 1200x600
D [11/Aug/2010:17:14:07 +0200] [Job 14] Page size: A4
D [11/Aug/2010:17:14:07 +0200] [Job 14] Width: 595, height: 842, absolute margins: 11.34, 11.34, 583.66, 830.66
D [11/Aug/2010:17:14:07 +0200] [Job 14] Getting input from file 
D [11/Aug/2010:17:14:07 +0200] [Job 14] foomatic-rip version 4.0.4.217 running...
D [11/Aug/2010:17:14:07 +0200] [Job 14] Parsing PPD file ...
D [11/Aug/2010:17:14:07 +0200] [Job 14] Added option PageSize
D [11/Aug/2010:17:14:07 +0200] [Job 14] Added option Quality
D [11/Aug/2010:17:14:07 +0200] [Job 14] Added option PrinterType
D [11/Aug/2010:17:14:07 +0200] [Job 14] Added option ColorMode
D [11/Aug/2010:17:14:07 +0200] [Job 14] Added option Resolution
D [11/Aug/2010:17:14:07 +0200] [Job 14] Added option ImageableArea
D [11/Aug/2010:17:14:07 +0200] [Job 14] Added option PaperDimension
D [11/Aug/2010:17:14:07 +0200] [Job 14] Added option InputSlot
D [11/Aug/2010:17:14:07 +0200] [Job 14] Added option MediaType
D [11/Aug/2010:17:14:07 +0200] [Job 14] Added option Copies
D [11/Aug/2010:17:14:07 +0200] [Job 14] Added option Nup
D [11/Aug/2010:17:14:07 +0200] [Job 14] Added option NupOrient
D [11/Aug/2010:17:14:07 +0200] [Job 14] Added option Font
D [11/Aug/2010:17:14:07 +0200] [Job 14] 
D [11/Aug/2010:17:14:07 +0200] [Job 14] Parameter Summary
D [11/Aug/2010:17:14:07 +0200] [Job 14] -----------------
D [11/Aug/2010:17:14:07 +0200] [Job 14] 
D [11/Aug/2010:17:14:07 +0200] [Job 14] Spooler: cups
D [11/Aug/2010:17:14:07 +0200] [Job 14] Printer: HP-LaserJet-1018
D [11/Aug/2010:17:14:07 +0200] [Job 14] Shell: /bin/bash
D [11/Aug/2010:17:14:07 +0200] [Job 14] PPD file: /etc/cups/ppd/HP-LaserJet-1018.ppd
D [11/Aug/2010:17:14:07 +0200] [Job 14] ATTR file: 
D [11/Aug/2010:17:14:07 +0200] [Job 14] Printer model: HP LaserJet 1018 Foomatic/foo2zjs (recommended)
D [11/Aug/2010:17:14:07 +0200] [Job 14] Job title: Sans nom 1
D [11/Aug/2010:17:14:07 +0200] [Job 14] File(s) to be printed:
D [11/Aug/2010:17:14:07 +0200] [Job 14] <STDIN>
D [11/Aug/2010:17:14:07 +0200] [Job 14] 
D [11/Aug/2010:17:14:07 +0200] [Job 14] Ghostscript extra search path ('GS_LIB'): /usr/share/cups/fonts
D [11/Aug/2010:17:14:07 +0200] [Job 14] Printing system options:
D [11/Aug/2010:17:14:07 +0200] [Job 14] Pondering option 'job-uuid=urn:uuid:750a62d2-cc57-32ee-5d11-2d24d6cd2f65'
D [11/Aug/2010:17:14:07 +0200] [Job 14] Unknown option job-uuid=urn:uuid:750a62d2-cc57-32ee-5d11-2d24d6cd2f65.
D [11/Aug/2010:17:14:07 +0200] [Job 14] Pondering option 'job-originating-host-name=localhost'
D [11/Aug/2010:17:14:07 +0200] [Job 14] Unknown option job-originating-host-name=localhost.
D [11/Aug/2010:17:14:07 +0200] [Job 14] Options from the PPD file:
D [11/Aug/2010:17:14:07 +0200] [Job 14] Pondering option 'InputSlot=Auto'
D [11/Aug/2010:17:14:07 +0200] [Job 14] Pondering option 'PageSize=A4'
D [11/Aug/2010:17:14:07 +0200] [Job 14] 
D [11/Aug/2010:17:14:07 +0200] [Job 14] ================================================
D [11/Aug/2010:17:14:07 +0200] [Job 14] 
D [11/Aug/2010:17:14:07 +0200] [Job 14] File: <STDIN>
D [11/Aug/2010:17:14:07 +0200] [Job 14] 
D [11/Aug/2010:17:14:07 +0200] [Job 14] ================================================
D [11/Aug/2010:17:14:07 +0200] [Job 14] 
D [11/Aug/2010:17:14:07 +0200] [Job 14] Relative margins: 11.34, 11.34, 11.34, 11.34
D [11/Aug/2010:17:14:07 +0200] [Job 14] PPD options: -r600 -dDEVICEWIDTHPOINTS=595 -dDEVICEHEIGHTPOINTS=842
D [11/Aug/2010:17:14:07 +0200] [Job 14] PostScript to be injected: 
D [11/Aug/2010:17:14:07 +0200] [Job 14] Running cat | /usr/bin/gs -q -dNOPAUSE -dBATCH -sDEVICE=pdfwrite -dCompatibilityLevel=1.3 -dAutoRotatePages=/None -dAutoFilterColorImages=false                -dNOPLATFONTS -dPARANOIDSAFER -sstdout=%stderr -dColorImageFilter=/FlateEncode                 -dPDFSETTINGS=/printer                 -dColorConversionStrategy=/LeaveColorUnchanged -dDoNumCopies -r600 -dDEVICEWIDTHPOINTS=595 -dDEVICEHEIGHTPOINTS=842 -sOutputFile=-  -c .setpdfwrite -f -
D [11/Aug/2010:17:14:07 +0200] [Job 14] Filetype: PDF
D [11/Aug/2010:17:14:07 +0200] [Job 14] Driver does not understand PDF input, converting to PostScript
D [11/Aug/2010:17:14:07 +0200] [Job 14] Storing temporary files in /var/spool/cups/tmp
D [11/Aug/2010:17:14:07 +0200] [Job 14] Starting process "pdf-to-ps" (generation 1)
D [11/Aug/2010:17:14:07 +0200] [Job 14] Filetype: PostScript
D [11/Aug/2010:17:14:07 +0200] [Job 14] Reading PostScript input ...
D [11/Aug/2010:17:14:07 +0200] [Job 14] --> This document is DSC-conforming!
D [11/Aug/2010:17:14:07 +0200] [Job 14] Job claims to be DSC-conforming, but "%%BeginProlog" was missing before first line with another"%%BeginProlog" comment (is this a TeX/LaTeX/dvips-generated PostScript file?). Assuming start of "Prolog" here.
D [11/Aug/2010:17:14:07 +0200] [Job 14] Inserting option code into "Prolog" section.
D [11/Aug/2010:17:14:07 +0200] [Job 14] 
D [11/Aug/2010:17:14:07 +0200] [Job 14] -----------
D [11/Aug/2010:17:14:07 +0200] [Job 14] Found: %%BeginProlog
D [11/Aug/2010:17:14:07 +0200] [Job 14] Found: %%EndProlog
D [11/Aug/2010:17:14:07 +0200] [Job 14] 
D [11/Aug/2010:17:14:07 +0200] [Job 14] -----------
D [11/Aug/2010:17:14:07 +0200] [Job 14] Found: %%BeginSetup
D [11/Aug/2010:17:14:07 +0200] [Job 14] Found: %%EndSetup
D [11/Aug/2010:17:14:07 +0200] [Job 14] Inserting PostScript code for CUPS' page accounting
D [11/Aug/2010:17:14:07 +0200] [Job 14] Inserting option code into "Setup" section.
D [11/Aug/2010:17:14:07 +0200] [Job 14] 
D [11/Aug/2010:17:14:07 +0200] [Job 14] -----------
D [11/Aug/2010:17:14:07 +0200] [Job 14] New page: %%Page: 1 1
D [11/Aug/2010:17:14:07 +0200] [Job 14] 
D [11/Aug/2010:17:14:07 +0200] [Job 14] Found: %%BeginPageSetup
D [11/Aug/2010:17:14:07 +0200] [Job 14] Inserting option code into "PageSetup" section.
D [11/Aug/2010:17:14:07 +0200] [Job 14] New page found but previous not printed, print it now.
D [11/Aug/2010:17:14:07 +0200] [Job 14] Found: %%Page: 2 2
D [11/Aug/2010:17:14:07 +0200] [Job 14] --> Output goes directly to the renderer now.
D [11/Aug/2010:17:14:07 +0200] [Job 14] 
D [11/Aug/2010:17:14:07 +0200] [Job 14] 
D [11/Aug/2010:17:14:07 +0200] [Job 14] Starting renderer with command: "foo2zjs-wrapper -P -z1 -L0    -r1200x600 -p9 -m1 -s7   -n1 "
D [11/Aug/2010:17:14:07 +0200] [Job 14] Starting process "kid3" (generation 1)
D [11/Aug/2010:17:14:07 +0200] [Job 14] Starting process "kid4" (generation 2)
D [11/Aug/2010:17:14:07 +0200] [Job 14] Starting process "renderer" (generation 2)
D [11/Aug/2010:17:14:07 +0200] [Job 14] JCL: %-12345X@PJL
D [11/Aug/2010:17:14:07 +0200] [Job 14] <job data> 
D [11/Aug/2010:17:14:07 +0200] [Job 14] 
D [11/Aug/2010:17:14:07 +0200] [Job 14] 
D [11/Aug/2010:17:14:07 +0200] [Job 14] -----------
D [11/Aug/2010:17:14:07 +0200] [Job 14] New page: %%Page: 2 2
D [11/Aug/2010:17:14:07 +0200] [Job 14] Found: %%Page: 2 2
D [11/Aug/2010:17:14:07 +0200] [Job 14] --> Output goes to the FIFO buffer now.
D [11/Aug/2010:17:14:07 +0200] [Job 14] 
D [11/Aug/2010:17:14:07 +0200] [Job 14] 
D [11/Aug/2010:17:14:07 +0200] [Job 14] Found: %%BeginPageSetup
D [11/Aug/2010:17:14:07 +0200] [Job 14] Inserting option code into "PageSetup" section.
D [11/Aug/2010:17:14:07 +0200] [Job 14] Flushing FIFO.
D [11/Aug/2010:17:14:07 +0200] [Job 14] 
D [11/Aug/2010:17:14:07 +0200] [Job 14] Closing renderer
D [11/Aug/2010:17:14:07 +0200] [Job 14] PAGE: 1 1
D [11/Aug/2010:17:14:07 +0200] [Job 14] STATE: +connecting-to-device
D [11/Aug/2010:17:14:07 +0200] [Job 14] PAGE: 2 1
D [11/Aug/2010:17:14:07 +0200] [Job 14] renderer exited with status 0
D [11/Aug/2010:17:14:07 +0200] [Job 14] kid4 exited with status 0
D [11/Aug/2010:17:14:07 +0200] [Job 14] kid3 finished
D [11/Aug/2010:17:14:07 +0200] [Job 14] kid3 exited with status 0
D [11/Aug/2010:17:14:07 +0200] [Job 14] pdf-to-ps exited with status 0
D [11/Aug/2010:17:14:07 +0200] [Job 14] 
D [11/Aug/2010:17:14:07 +0200] [Job 14] Closing foomatic-rip.
D [11/Aug/2010:17:14:07 +0200] [Job 14] prnt/backend/hp.c 745: ERROR: open device failed stat=12: hp:/usb/HP_LaserJet_1018?serial=KP338R3
D [11/Aug/2010:17:14:07 +0200] [Job 14] Backend returned status 1 (failed)
D [11/Aug/2010:17:14:07 +0200] [Job 14] End of messages
D [11/Aug/2010:17:14:07 +0200] [Job 14] printer-state=3(idle)
D [11/Aug/2010:17:14:07 +0200] [Job 14] printer-state-message="/usr/lib/cups/backend/hp failed"
D [11/Aug/2010:17:14:07 +0200] [Job 14] printer-state-reasons=none
E [11/Aug/2010:17:53:13 +0200] [cups-driverd] Bad driver information file "/usr/share/cups/drv/sample.drv"!
E [11/Aug/2010:18:12:16 +0200] [cups-driverd] Bad driver information file "/usr/share/cups/drv/sample.drv"!
E [11/Aug/2010:18:12:20 +0200] [cups-driverd] Bad driver information file "/usr/share/cups/drv/sample.drv"!
E [11/Aug/2010:18:12:23 +0200] [cups-driverd] Bad driver information file "/usr/share/cups/drv/sample.drv"!
E [11/Aug/2010:18:20:28 +0200] [cups-driverd] Bad driver information file "/usr/share/cups/drv/sample.drv"!
E [11/Aug/2010:18:27:31 +0200] [cups-driverd] Bad driver information file "/usr/share/cups/drv/sample.drv"!
E [11/Aug/2010:18:28:37 +0200] [cups-driverd] Bad driver information file "/usr/share/cups/drv/sample.drv"!

en sudo c'est bon
[img][/img]

Dernière modification par coyote34 (Le 11/08/2010, à 23:09)

Krisss · Le 11/08/2010, à 23:07

Alors super en sudo c'est ok,

Peux-tu modifier le post précédent et placer le résultat du fichier Log entre les balises Code s'il te plait, tu cliques en bas du message à droite sur modifier ...

Par la même occasion pour l'image, ça se présente comme ça: [img]htttp://lelien[/img], pas besoin de mettre <a href ...

Alors après ça ton installation devrait être complète

Redémarre ton ordinateur

Et ensuite reporte-moi le résultat de: hp-check -t

coyote34 · Le 11/08/2010, à 23:10

estelleluis@estelleluis:~$ hp-check -t

HP Linux Imaging and Printing System (ver. 3.10.2)
Dependency/Version Check Utility ver. 14.3

Copyright (c) 2001-9 Hewlett-Packard Development Company, LP
This software comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to distribute it
under certain conditions. See COPYING file for more details.

Note: hp-check can be run in three modes:
1. Compile-time check mode (-c or --compile): Use this mode before compiling the
HPLIP supplied tarball (.tar.gz or .run) to determine if the proper dependencies
are installed to successfully compile HPLIP.                                    
2. Run-time check mode (-r or --run): Use this mode to determine if a distro    
supplied package (.deb, .rpm, etc) or an already built HPLIP supplied tarball   
has the proper dependencies installed to successfully run.                      
3. Both compile- and run-time check mode (-b or --both) (Default): This mode    
will check both of the above cases (both compile- and run-time dependencies).   

Saving output in log file: hp-check.log

Initializing. Please wait...
 
---------------
| SYSTEM INFO |
---------------

Basic system information:
Linux estelleluis 2.6.32-24-generic #39-Ubuntu SMP Wed Jul 28 05:14:15 UTC 2010 x86_64 GNU/Linux

Distribution:
ubuntu 10.04

Checking Python version...
OK, version 2.6.5 installed

Checking PyQt 4.x version...
OK, version 4.7.2 installed.

Checking for CUPS...
Status: le programmateur s’exécute
Version: 1.4.3
error_log is set to level: warn

Checking for dbus/python-dbus...
dbus daemon is running.
python-dbus version: 0.83.0


------------------------------------
| COMPILE AND RUNTIME DEPENDENCIES |
------------------------------------

note: To check for compile-time only dependencies, re-run hp-check with the -c parameter (ie, hp-check -c).
note: To check for run-time only dependencies, re-run hp-check with the -r parameter (ie, hp-check -r).

Checking for dependency: CUPS - Common Unix Printing System...
OK, found.

Checking for dependency: CUPS devel- Common Unix Printing System development files...
OK, found.

Checking for dependency: CUPS image - CUPS image development files...
OK, found.

Checking for dependency: DBus - Message bus system...
OK, found.

Checking for dependency: gcc - GNU Project C and C++ Compiler...
OK, found.

Checking for dependency: GhostScript - PostScript and PDF language interpreter and previewer...
OK, found.

Checking for dependency: libcrypto - OpenSSL cryptographic library...
OK, found.

Checking for dependency: libjpeg - JPEG library...
OK, found.

Checking for dependency: libnetsnmp-devel - SNMP networking library development files...
OK, found.

Checking for dependency: libpthread - POSIX threads library...
OK, found.

Checking for dependency: libtool - Library building support services...
OK, found.

Checking for dependency: libusb - USB library...
OK, found.

Checking for dependency: make - GNU make utility to maintain groups of programs...
OK, found.

Checking for dependency: PIL - Python Imaging Library (required for commandline scanning with hp-scan)...
OK, found.

Checking for dependency: PolicyKit - Administrative policy framework...
OK, found.

Checking for dependency: PyQt 4 DBus - DBus Support for PyQt4...
OK, found.

Checking for dependency: Python DBus - Python bindings for DBus...
OK, found.

Checking for dependency: Python devel - Python development files...
OK, found.

Checking for dependency: Python libnotify - Python bindings for the libnotify Desktop notifications...
OK, found.

Checking for dependency: Python XML libraries...
OK, found.

Checking for dependency: Python 2.3 or greater - Required for fax functionality...
OK, found.

Checking for dependency: Python 2.2 or greater - Python programming language...
OK, found.

Checking for dependency: Reportlab - PDF library for Python...
OK, found.

Checking for dependency: SANE - Scanning library...
OK, found.

Checking for dependency: SANE - Scanning library development files...
OK, found.

Checking for dependency: scanimage - Shell scanning program...
OK, found.

Checking for dependency: xsane - Graphical scanner frontend for SANE...
OK, found.


----------------------
| HPLIP INSTALLATION |
----------------------


Currently installed HPLIP version...
HPLIP 3.10.2 currently installed in '/usr/share/hplip'.

Current contents of '/etc/hp/hplip.conf' file:
# hplip.conf.  Generated from hplip.conf.in by configure.

[hplip]
version=3.10.2

[dirs]
home=/usr/share/hplip
run=/var/run
ppd=/usr/share/ppd/hplip/HP
ppdbase=/usr/share/ppd/hplip
doc=/usr/share/doc/hplip-doc/HTML
icon=no
cupsbackend=/usr/lib/cups/backend
cupsfilter=/usr/lib/cups/filter
drv=/usr/share/cups/drv

# Following values are determined at configure time and cannot be changed.
[configure]
network-build=yes
pp-build=yes
gui-build=yes
scanner-build=yes
fax-build=yes
dbus-build=yes
cups11-build=no
doc-build=yes
shadow-build=no
hpijs-install=yes
foomatic-drv-install=yes
foomatic-ppd-install=yes
foomatic-rip-hplip-install=no
hpcups-install=yes
cups-drv-install=yes
cups-ppd-install=no
internal-tag=3.10.2rc1.9
restricted-build=no
ui-toolkit=qt4
qt3=no
qt4=yes
policy-kit=yes
hpijs-only-build=no
lite-build=no
udev-acl-rules=yes
hpcups-only-build=no
hpijs-only-build=no


Current contents of '/var/lib/hp/hplip.state' file:
[plugin]
eula = 1
installed = 1



Current contents of '~/.hplip/hplip.conf' file:
[last_used]
printer_name = HP-LaserJet-1018
working_dir = .
device_uri = "hp:/usb/HP_LaserJet_1018?serial=KP338R3"

[commands]
scan = /usr/bin/simple-scan %SANE_URI%

[installation]
version = 3.10.2rc1.9
date_time = 11/08/2010 23:09:39

[settings]
systray_messages = 0
systray_visible = 2

[fax]
email_address = 
voice_phone = 

[refresh]
rate = 10
enable = true
type = 2

[polling]
enable = false
device_list = 
interval = 5



--------------------------
| DISCOVERED USB DEVICES |
--------------------------

  Device URI                        Model           
  --------------------------------  ----------------
  hp:/usb/HP_LaserJet_1018?serial=  HP LaserJet 1018
  KP338R3                                           

---------------------------------
| INSTALLED CUPS PRINTER QUEUES |
---------------------------------

 
HP-LaserJet-1018 
------------------
Type: Printer
Device URI: hp:/usb/HP_LaserJet_1018?serial=KP338R3
Required plug-in status: Installed
error: Device busy: hp:/usb/HP_LaserJet_1018?serial=KP338R3
error: Device not found
error: Communication status: Failed


----------------------
| SANE CONFIGURATION |
----------------------

'hpaio' in '/etc/sane.d/dll.conf'...
'hpaio' in '/etc/sane.d/dll.d/hplip'...
OK, found. SANE backend 'hpaio' is properly set up.

Checking output of 'scanimage -L'...
 
No scanners were identified. If you were expecting something different,
check that the scanner is plugged in, turned on and detected by the
sane-find-scanner tool (if appropriate). Please read the documentation
which came with this software (README, FAQ, manpages).


---------------------
| PYTHON EXTENSIONS |
---------------------

Checking 'cupsext' CUPS extension...
OK, found.

Checking 'pcardext' Photocard extension...
OK, found.

Checking 'hpmudext' I/O extension...
OK, found.

Checking 'scanext' SANE scanning extension...
OK, found.


 
-----------------
| USB I/O SETUP |
-----------------

Checking for permissions of USB attached printers...

HP Device 0x4117 at 001:007: 
    Device URI: hp:/usb/HP_LaserJet_1018?serial=KP338R3
    Device node: /dev/bus/usb/001/007
    Mode: 0664

---------------
| USER GROUPS |
---------------

estelleluis adm lp dialout cdrom plugdev lpadmin admin sambashare

User member of group 'lp'. Enables print/ scan/ fax.
User member of group 'lpadmin'.

-----------
| SUMMARY |
-----------

error: 1 error or warning.

Please refer to the installation instructions at:
http://hplip.sourceforge.net/install/index.html


Done.
estelleluis@estelleluis:~$

Toujours la même erreur, et là elle veut plus imprimer, elle me dit plus de papier, alors qu'il y en a

Krisss · Le 11/08/2010, à 23:19

Merci pour le post,

alors pour l'erreur, lp est bon maintenant ...

Par contre il y a un conflit de communication ... je pense au fichier .conf

As-tu redémarré ton imprimante ?

Sinon redémarre tout, essaye ton imprimante et si ça ne va pas relance en console: sudo hp-setup

coyote34 · Le 11/08/2010, à 23:28

Ca remarche impécable mais toujours le soucis si elle plus de papier elle se met en défaut, je recharge et là pas moyen de la relancer, je désespère

Krisss · Le 11/08/2010, à 23:47

OK donc l'install HPLIP est terminée, alors tu as sauf erreur 2 lumières (LED) sur la machine, comment se comportent-elles quand elle est à court de papier ?

Et as-tu un message d'alerte de la part de HPLIP à l'écran ?

Et quand elle est en panne, et que tu double-clique sur l'icone HPLIP, que te donnent les "statuts" et "printer control" (onglets de la fenêtre), si tu pouvais mettre une image du HP Device Manager, ça serait super.

coyote34 · Le 11/08/2010, à 23:57

Quand il y a plus de papier la led du haut et orange et clignote
HPLIB me dit qu'il n'y a plus de papier

?img=1281563744.png

?img=1281563843.png

coyote34 · Le 11/08/2010, à 23:58

[img][url=http://pix.toile-libre.org/?img=1281563843.png][/img]

coyote34 · Le 12/08/2010, à 00:00

[img][/img]

Désolé j'ai pas le coup de main pour les images

coyote34 · Le 12/08/2010, à 09:51

Bonjour, j'ai aussi cette erreur maintenant en rentrant dans synaptic

?img=1281599425.png

Je sais pas de trop ce que ça veut dire

Dernière modification par coyote34 (Le 12/08/2010, à 13:40)

Krisss · Le 12/08/2010, à 13:01

Salut Coyote34,

Alors d'abord pour les images, ça vient petit à petit

Pour insérer une image dans le forum, Tu cliques sur la balise "Img" à l'endroit ou tu veux placer l'image, et la balise va interpréter un lien URL -> http://pix.toile-libre.org/?img=1281599425.png

Donc pour faire apparaitre l'image il te suffit de placer ce lien entre les balise Code comme ceci

{img}http://pix.toile-libre.org/?img=1281599425.png{/img}

J'ai remplacé les crochets par des accolades pour l'exemple ... Si tu pouvais modifier les messages précédents ...

---------------------------------------

Pour l'erreur Synaptic, ce n'est pas grâve, il faut juste fermer Synaptic, puis lancer en console:

sudo aptitude update

sudo aptitude safe-upgrade

Et le tour est joué ...

---------------------------------------

Ensuite pour l'imprimante, d'après les infos que j'ai trouvé lorsque la lumière supérieure clignote, cela signifie 2 choses ...

A Problème de cartouche toner vide

B Problème de tampon de mémoire saturé

Donc, peux-tu faire le test suivant ...

Tu enlèves le papier de l'imprimante et tu lances un page d'impression, la lumière devrait se mettre à clignoter, HPLIP t'informe sur l'écran "Papier vide" ...

Tu ouvres HP Device Manager en double-cliquant dessus, tu vas dans "Printer Control" et tu devrais voir en bas de la fenêtre "Job Queue" un fichier en attente

Clique sur "Cancel job"

TEST A: Ensuite va éteindre ton imprimante, mets une feuille de papier, tu attends une minute et rallume-là

Puis reporte-moi ce qui se passe ...

Dernière modification par Krisss (Le 12/08/2010, à 13:19)

coyote34 · Le 12/08/2010, à 13:38

Ok pour les images mais ça marche pas, je clique sur Img et ensuite je colle juste l'adresse comme tu m'a indiqué mais l'image n'apparait???

C'est ok pour les 2 commandes mais par contre pour m'a culture elles servent à croit exatement???

Test A : Après extinction de l'imprimante, l'icône imprimante en haut à droite a dit que l'impression était terminée et après allumage, elle est opérationnelle

Ubuntu-fr

Navigation

Liens de recherche

Annonce

#26 Le 11/08/2010, à 18:21

Re : [Résolu] HP 1018 impos. à redémarrer qd bac d'alimentation vide

#27 Le 11/08/2010, à 18:29

Re : [Résolu] HP 1018 impos. à redémarrer qd bac d'alimentation vide

#28 Le 11/08/2010, à 18:33

Re : [Résolu] HP 1018 impos. à redémarrer qd bac d'alimentation vide

#29 Le 11/08/2010, à 18:41

Re : [Résolu] HP 1018 impos. à redémarrer qd bac d'alimentation vide

#30 Le 11/08/2010, à 18:59

Re : [Résolu] HP 1018 impos. à redémarrer qd bac d'alimentation vide

#31 Le 11/08/2010, à 21:37

Re : [Résolu] HP 1018 impos. à redémarrer qd bac d'alimentation vide

#32 Le 11/08/2010, à 21:44

Re : [Résolu] HP 1018 impos. à redémarrer qd bac d'alimentation vide

#33 Le 11/08/2010, à 21:50

Re : [Résolu] HP 1018 impos. à redémarrer qd bac d'alimentation vide

#34 Le 11/08/2010, à 22:03

Re : [Résolu] HP 1018 impos. à redémarrer qd bac d'alimentation vide

#35 Le 11/08/2010, à 22:06

Re : [Résolu] HP 1018 impos. à redémarrer qd bac d'alimentation vide

#36 Le 11/08/2010, à 22:10

Re : [Résolu] HP 1018 impos. à redémarrer qd bac d'alimentation vide

#37 Le 11/08/2010, à 22:17

Re : [Résolu] HP 1018 impos. à redémarrer qd bac d'alimentation vide

#38 Le 11/08/2010, à 22:29

Re : [Résolu] HP 1018 impos. à redémarrer qd bac d'alimentation vide

#39 Le 11/08/2010, à 22:50

Re : [Résolu] HP 1018 impos. à redémarrer qd bac d'alimentation vide

#40 Le 11/08/2010, à 23:07

Re : [Résolu] HP 1018 impos. à redémarrer qd bac d'alimentation vide

#41 Le 11/08/2010, à 23:10

Re : [Résolu] HP 1018 impos. à redémarrer qd bac d'alimentation vide

#42 Le 11/08/2010, à 23:19

Re : [Résolu] HP 1018 impos. à redémarrer qd bac d'alimentation vide

#43 Le 11/08/2010, à 23:28

Re : [Résolu] HP 1018 impos. à redémarrer qd bac d'alimentation vide

#44 Le 11/08/2010, à 23:47

Re : [Résolu] HP 1018 impos. à redémarrer qd bac d'alimentation vide

#45 Le 11/08/2010, à 23:57

Re : [Résolu] HP 1018 impos. à redémarrer qd bac d'alimentation vide

#46 Le 11/08/2010, à 23:58

Re : [Résolu] HP 1018 impos. à redémarrer qd bac d'alimentation vide

#47 Le 12/08/2010, à 00:00

Re : [Résolu] HP 1018 impos. à redémarrer qd bac d'alimentation vide

#48 Le 12/08/2010, à 09:51

Re : [Résolu] HP 1018 impos. à redémarrer qd bac d'alimentation vide

#49 Le 12/08/2010, à 13:01

Re : [Résolu] HP 1018 impos. à redémarrer qd bac d'alimentation vide

#50 Le 12/08/2010, à 13:38

Re : [Résolu] HP 1018 impos. à redémarrer qd bac d'alimentation vide

Pied de page des forums