#1 Le 28/05/2006, à 11:25
- Sylvain151
PCI: Cannot allocate resource region X of bridge 0000:00:1c.0
Bonjour à vous !
Ca y est, j'ai voulu faire le grand pas !
Hier, je prends mon CD d'Ubuntu (la version Release Candidate 6.06), et je l'installe, utilisant la totalité du disque (plus de Windows).
Je fais de nombreuses expérimentations toute l'après midi, je commence à comprendre comment tout marche. Je suis déjà Linux Friend, et Windows me semble déjà loin !
Je décide, tant mes tests ont un peu abimé le logiciel (pleins de package installés, etc), bref, de réinstaller le système.
Je mets le CD, il se lance en live CD. Je mets à installer, et il se bloque dans les 23%. Je relance l'ordinateur, et impossible cette fois-ci de lancer le live-CD.
Il se bloque sur une étape (jamais la même) du lancement, affiche ensuite un écran noir avec le message suivant:
[4294668.777000]PCI: Cannot allocate resource region 7 of bridge 0000:00:1c.0
[4294668.777000]PCI: Cannot allocate resource region 8 of bridge 0000:00:1c.0
[4294668.777000]PCI: Cannot allocate resource region 9 of bridge 0000:00:1c.0Je n'ai aucune idée de ce que cela peut signifier. J'ai depuis réinstallé windows, sans soucis, ce qui me laisse penser que le soucis n'est pas matériel.
Voici la config de mon ordinateur:
Intel Pentium 4 640 3.2 GHz
512 MB DDR2
HDD 100 GB
ATI Radeon X600 256 MB
DVD-RW Lightscribe
Fax/Modem
Network Card
FireWire
Tv-Out
Monitor 17" WXGA BrightView 1440 x 900
4 USB 2.0
Bluetooth
Wifi
Card reader 6 in 1
Etre de retour sous windows m'attriste déjà, tant j'étais heureux de découvrir un nouveau système. J'espère que je pourrais bientôt refaire marcher mon ubuntu :)
Je vous remercie d'avance de l'aide que vous pourrez m'apporter.
Amicalement, Sylvain.
Dernière modification par Sylvain151 (Le 28/05/2006, à 15:32)
Hors ligne
#2 Le 29/05/2006, à 22:57
- Sylvain_151
Re : PCI: Cannot allocate resource region X of bridge 0000:00:1c.0
Un petit up pour la bonne cause 
Merci d'avance 
#3 Le 03/06/2006, à 23:22
- Heaulivié
Re : PCI: Cannot allocate resource region X of bridge 0000:00:1c.0
J'ai exactement le même message sur mon portable ... Sauf que chez moi il y a 6 - 7 lignes comme ça et que les chiffres diffèrent un peu ...
Hors ligne
#4 Le 03/06/2006, à 23:40
- slasher_fun
Re : PCI: Cannot allocate resource region X of bridge 0000:00:1c.0
J'ai aussi la même chose sur mon portable (Acer Aspire 1692) mais ça ne bloque rien du tout (même pas le temps de lire les chiffres !)
Hors ligne
#5 Le 03/06/2006, à 23:46
- Heaulivié
Re : PCI: Cannot allocate resource region X of bridge 0000:00:1c.0
Moi j'ai un Acer Aspire 1652 et au chargement du CD pour l'installation ça me le fait, mais ça ne bloque pas ... Après l'installation, il charge GRUB et quand je sélectionne Ubuntu, là, il me met ces ces erreurs (Cannot allocate ressource region ....) et ça bloque ...
Hors ligne
#6 Le 04/06/2006, à 18:25
- Heaulivié
Re : PCI: Cannot allocate resource region X of bridge 0000:00:1c.0
Personne ne sait quoi faire ? (UP pour une réponse ... j'ai envie d'y arriver !)
Hors ligne
#7 Le 12/07/2006, à 00:43
- Astier
Re : PCI: Cannot allocate resource region X of bridge 0000:00:1c.0
Bonjour, moi aussi détenteur d'un ACER Aspire 1692 WLMi j'ai le même message mais je n'ai aucun problème (je n'ai pas testé le wifi ni l'infrarouge)...
Peut-être une piste : http://forum.ubuntu-fr.org/viewtopic.php?id=42628 (je vais tester et je vous dirai).
Salut
Hors ligne
#8 Le 12/07/2006, à 01:07
- Astier
Re : PCI: Cannot allocate resource region X of bridge 0000:00:1c.0
RE
chez moi l'option acpi=off marche... seulement jusqu'à un certain point. En effet ces message "Cannot allocate..." n'apparaissent plus mais lorsque j'arrive au moment de me logger j'entends deux "sonneries" (au lieu d'une...) je me logge et après il ne me reste qu'à contempler un fond marron, mon bureau n'apparaissant pas (le fait d'avoir l'indicateur de batterie affichée dans la barre des tâches?).
Les options noapic et nolapic (que j'avais utilisée lors de ma première install - Ubuntu 5.10, version sous laquelle je n'avais jamais constaté un tel message) ne changent rien au problème initial, les messages apparaissent toujours.
Voilà, si quelqu'un sait à quoi cela peut correspondre, ce serait un plaisir d'avoir quelques renseignements. Je mets à disposition mon /var/log/dmesg :
[17179569.184000] Linux version 2.6.15-26-386 (buildd@terranova) (gcc version 4.0.3 (Ubuntu 4.0.3-1ubuntu5)) #1 PREEMPT Fri Jul 7 19:27:00 UTC 2006
[17179569.184000] BIOS-provided physical RAM map:
[17179569.184000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
[17179569.184000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
[17179569.184000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[17179569.184000] BIOS-e820: 0000000000100000 - 000000003fe80000 (usable)
[17179569.184000] BIOS-e820: 000000003fe80000 - 000000003fe89000 (ACPI data)
[17179569.184000] BIOS-e820: 000000003fe89000 - 000000003ff00000 (ACPI NVS)
[17179569.184000] BIOS-e820: 000000003ff00000 - 0000000040000000 (reserved)
[17179569.184000] BIOS-e820: 00000000e0000000 - 00000000f0006000 (reserved)
[17179569.184000] BIOS-e820: 00000000f0008000 - 00000000f000c000 (reserved)
[17179569.184000] BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved)
[17179569.184000] BIOS-e820: 00000000fed20000 - 00000000fed90000 (reserved)
[17179569.184000] BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
[17179569.184000] 126MB HIGHMEM available.
[17179569.184000] 896MB LOWMEM available.
[17179569.184000] On node 0 totalpages: 261760
[17179569.184000] DMA zone: 4096 pages, LIFO batch:0
[17179569.184000] DMA32 zone: 0 pages, LIFO batch:0
[17179569.184000] Normal zone: 225280 pages, LIFO batch:31
[17179569.184000] HighMem zone: 32384 pages, LIFO batch:7
[17179569.184000] DMI present.
[17179569.184000] ACPI: RSDP (v000 PTLTD ) @ 0x000f6980
[17179569.184000] ACPI: RSDT (v001 PTLTD RSDT 0x06040000 LTP 0x00000000) @ 0x3fe80fdc
[17179569.184000] ACPI: FADT (v001 INTEL ALVISO 0x06040000 LOHR 0x0000005f) @ 0x3fe88e8a
[17179569.184000] ACPI: MADT (v001 INTEL ALVISO 0x06040000 LOHR 0x0000005f) @ 0x3fe88efe
[17179569.184000] ACPI: HPET (v001 INTEL ALVISO 0x06040000 LOHR 0x0000005f) @ 0x3fe88f64
[17179569.184000] ACPI: MCFG (v001 INTEL ALVISO 0x06040000 LOHR 0x0000005f) @ 0x3fe88f9c
[17179569.184000] ACPI: BOOT (v001 PTLTD $SBFTBL$ 0x06040000 LTP 0x00000001) @ 0x3fe88fd8
[17179569.184000] ACPI: SSDT (v001 PmRef Cpu0Ist 0x00003000 INTL 0x20030224) @ 0x3fe81411
[17179569.184000] ACPI: SSDT (v001 PmRef Cpu0Cst 0x00003001 INTL 0x20030224) @ 0x3fe81239
[17179569.184000] ACPI: SSDT (v001 PmRef CpuPm 0x00003000 INTL 0x20030224) @ 0x3fe81020
[17179569.184000] ACPI: DSDT (v001 INTEL ALVISO 0x06040000 MSFT 0x0100000e) @ 0x00000000
[17179569.184000] ACPI: PM-Timer IO Port: 0x1008
[17179569.184000] ACPI: Local APIC address 0xfee00000
[17179569.184000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[17179569.184000] Processor #0 6:13 APIC version 20
[17179569.184000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[17179569.184000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[17179569.184000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
[17179569.184000] ACPI: IOAPIC (id[0x02] address[0xfec20000] gsi_base[24])
[17179569.184000] IOAPIC[1]: Unable to change apic_id!
[17179569.184000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[17179569.184000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[17179569.184000] ACPI: IRQ0 used by override.
[17179569.184000] ACPI: IRQ2 used by override.
[17179569.184000] ACPI: IRQ9 used by override.
[17179569.184000] Enabling APIC mode: Flat. Using 1 I/O APICs
[17179569.184000] ACPI: HPET id: 0x8086a201 base: 0x0
[17179569.184000] Using ACPI (MADT) for SMP configuration information
[17179569.184000] Allocating PCI resources starting at 50000000 (gap: 40000000:a0000000)
[17179569.184000] Built 1 zonelists
[17179569.184000] Kernel command line: root=/dev/hda1 ro quiet splash
[17179569.184000] mapped APIC to ffffd000 (fee00000)
[17179569.184000] mapped IOAPIC to ffffc000 (fec00000)
[17179569.184000] Initializing CPU#0
[17179569.184000] PID hash table entries: 4096 (order: 12, 65536 bytes)
[17179569.184000] Detected 1729.290 MHz processor.
[17179569.184000] Using pmtmr for high-res timesource
[17179569.184000] Console: colour VGA+ 80x25
[17179572.224000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[17179572.224000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[17179572.248000] Memory: 1027360k/1047040k available (1976k kernel code, 18924k reserved, 606k data, 288k init, 129536k highmem)
[17179572.248000] Checking if this processor honours the WP bit even in supervisor mode... Ok.
[17179572.328000] Calibrating delay using timer specific routine.. 3475.16 BogoMIPS (lpj=6950330)
[17179572.328000] Security Framework v1.0.0 initialized
[17179572.328000] SELinux: Disabled at boot.
[17179572.328000] Mount-cache hash table entries: 512
[17179572.328000] CPU: After generic identify, caps: afe9fbff 00100000 00000000 00000000 00000180 00000000 00000000
[17179572.328000] CPU: After vendor identify, caps: afe9fbff 00100000 00000000 00000000 00000180 00000000 00000000
[17179572.328000] CPU: L1 I cache: 32K, L1 D cache: 32K
[17179572.328000] CPU: L2 cache: 2048K
[17179572.328000] CPU: After all inits, caps: afe9fbff 00100000 00000000 00000040 00000180 00000000 00000000
[17179572.328000] mtrr: v2.0 (20020519)
[17179572.328000] CPU: Intel(R) Pentium(R) M processor 1.73GHz stepping 08
[17179572.328000] Enabling fast FPU save and restore... done.
[17179572.328000] Enabling unmasked SIMD FPU exception support... done.
[17179572.328000] Checking 'hlt' instruction... OK.
[17179572.344000] checking if image is initramfs... it is
[17179572.940000] Freeing initrd memory: 6617k freed
[17179572.948000] ACPI: Looking for DSDT ... not found!
[17179572.952000] ENABLING IO-APIC IRQs
[17179572.952000] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
[17179573.096000] NET: Registered protocol family 16
[17179573.096000] EISA bus registered
[17179573.096000] ACPI: bus type pci registered
[17179573.096000] PCI: PCI BIOS revision 2.10 entry at 0xfd7be, last bus=7
[17179573.096000] PCI: Using MMCONFIG
[17179573.096000] ACPI: Subsystem revision 20051216
[17179573.468000] ACPI: Interpreter enabled
[17179573.468000] ACPI: Using IOAPIC for interrupt routing
[17179573.468000] ACPI: PCI Root Bridge [PCI0] (0000:00)
[17179573.468000] PCI: Probing PCI hardware (bus 00)
[17179573.468000] PCI quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO
[17179573.468000] PCI quirk: region 1180-11bf claimed by ICH6 GPIO
[17179573.468000] PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1
[17179573.468000] Boot video device is 0000:01:00.0
[17179573.472000] PCI: Transparent bridge - 0000:00:1e.0
[17179573.472000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[17179573.476000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEGP._PRT]
[17179573.476000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
[17179573.476000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
[17179573.476000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
[17179573.476000] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 *10 12 14 15)
[17179573.476000] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
[17179573.476000] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
[17179573.476000] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 *11 12 14 15)
[17179573.480000] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
[17179573.480000] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
[17179573.480000] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
[17179573.480000] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 *11 12 14 15)
[17179573.480000] ACPI: Embedded Controller [EC0] (gpe 29) interrupt mode.
[17179573.500000] Linux Plug and Play Support v0.97 (c) Adam Belay
[17179573.500000] pnp: PnP ACPI init
[17179573.504000] pnp: PnP ACPI: found 9 devices
[17179573.504000] PnPBIOS: Disabled by ACPI PNP
[17179573.504000] PCI: Using ACPI for IRQ routing
[17179573.504000] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
[17179573.504000] PCI: Cannot allocate resource region 7 of bridge 0000:00:1c.0
[17179573.504000] PCI: Cannot allocate resource region 8 of bridge 0000:00:1c.0
[17179573.504000] PCI: Cannot allocate resource region 9 of bridge 0000:00:1c.0
[17179573.504000] PCI: Cannot allocate resource region 7 of bridge 0000:00:1c.1
[17179573.504000] PCI: Cannot allocate resource region 8 of bridge 0000:00:1c.1
[17179573.504000] PCI: Cannot allocate resource region 9 of bridge 0000:00:1c.1
[17179573.504000] PCI: Cannot allocate resource region 7 of bridge 0000:00:1c.2
[17179573.504000] PCI: Cannot allocate resource region 8 of bridge 0000:00:1c.2
[17179573.504000] PCI: Cannot allocate resource region 9 of bridge 0000:00:1c.2
[17179573.524000] PCI: Bridge: 0000:00:01.0
[17179573.524000] IO window: 3000-3fff
[17179573.524000] MEM window: c8100000-c81fffff
[17179573.524000] PREFETCH window: d0000000-d7ffffff
[17179573.524000] PCI: Bridge: 0000:00:1c.0
[17179573.524000] IO window: disabled.
[17179573.524000] MEM window: disabled.
[17179573.524000] PREFETCH window: disabled.
[17179573.524000] PCI: Bridge: 0000:00:1c.1
[17179573.524000] IO window: disabled.
[17179573.524000] MEM window: disabled.
[17179573.524000] PREFETCH window: disabled.
[17179573.524000] PCI: Bridge: 0000:00:1c.2
[17179573.524000] IO window: disabled.
[17179573.524000] MEM window: disabled.
[17179573.524000] PREFETCH window: disabled.
[17179573.524000] PCI: Bus 7, cardbus bridge: 0000:06:01.0
[17179573.524000] IO window: 00004000-000040ff
[17179573.524000] IO window: 00004400-000044ff
[17179573.524000] PREFETCH window: 50000000-51ffffff
[17179573.524000] MEM window: 52000000-53ffffff
[17179573.524000] PCI: Bridge: 0000:00:1e.0
[17179573.524000] IO window: 4000-4fff
[17179573.524000] MEM window: c8200000-c82fffff
[17179573.524000] PREFETCH window: 50000000-51ffffff
[17179573.524000] ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 169
[17179573.524000] PCI: Setting latency timer of device 0000:00:01.0 to 64
[17179573.524000] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 17 (level, low) -> IRQ 177
[17179573.524000] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[17179573.524000] ACPI: PCI Interrupt 0000:00:1c.1[b] -> GSI 16 (level, low) -> IRQ 169
[17179573.524000] PCI: Setting latency timer of device 0000:00:1c.1 to 64
[17179573.524000] ACPI: PCI Interrupt 0000:00:1c.2[C] -> GSI 18 (level, low) -> IRQ 185
[17179573.524000] PCI: Setting latency timer of device 0000:00:1c.2 to 64
[17179573.524000] PCI: Setting latency timer of device 0000:00:1e.0 to 64
[17179573.524000] ACPI: PCI Interrupt 0000:06:01.0[A] -> GSI 18 (level, low) -> IRQ 185
[17179573.524000] Simple Boot Flag at 0x36 set to 0x1
[17179573.528000] audit: initializing netlink socket (disabled)
[17179573.528000] audit(1152658728.528:1): initialized
[17179573.528000] highmem bounce pool size: 64 pages
[17179573.528000] VFS: Disk quotas dquot_6.5.1
[17179573.528000] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[17179573.528000] Initializing Cryptographic API
[17179573.528000] io scheduler noop registered
[17179573.528000] io scheduler anticipatory registered
[17179573.528000] io scheduler deadline registered
[17179573.528000] io scheduler cfq registered
[17179573.528000] ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 169
[17179573.528000] PCI: Setting latency timer of device 0000:00:01.0 to 64
[17179573.528000] assign_interrupt_mode Found MSI capability
[17179573.528000] Allocate Port Service[pcie00]
[17179573.528000] Allocate Port Service[pcie03]
[17179573.528000] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 17 (level, low) -> IRQ 177
[17179573.528000] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[17179573.528000] assign_interrupt_mode Found MSI capability
[17179573.528000] Allocate Port Service[pcie00]
[17179573.528000] Allocate Port Service[pcie02]
[17179573.528000] Allocate Port Service[pcie03]
[17179573.528000] ACPI: PCI Interrupt 0000:00:1c.1[b] -> GSI 16 (level, low) -> IRQ 169
[17179573.528000] PCI: Setting latency timer of device 0000:00:1c.1 to 64
[17179573.528000] assign_interrupt_mode Found MSI capability
[17179573.528000] Allocate Port Service[pcie00]
[17179573.528000] Allocate Port Service[pcie02]
[17179573.528000] Allocate Port Service[pcie03]
[17179573.528000] ACPI: PCI Interrupt 0000:00:1c.2[C] -> GSI 18 (level, low) -> IRQ 185
[17179573.528000] PCI: Setting latency timer of device 0000:00:1c.2 to 64
[17179573.528000] assign_interrupt_mode Found MSI capability
[17179573.528000] Allocate Port Service[pcie00]
[17179573.528000] Allocate Port Service[pcie02]
[17179573.528000] Allocate Port Service[pcie03]
[17179573.528000] isapnp: Scanning for PnP cards...
[17179573.884000] isapnp: No Plug & Play device found
[17179573.896000] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[17179573.928000] serio: i8042 AUX port at 0x60,0x64 irq 12
[17179573.936000] serio: i8042 KBD port at 0x60,0x64 irq 1
[17179573.936000] Serial: 8250/16550 driver $Revision: 1.90 $ 48 ports, IRQ sharing enabled
[17179573.936000] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a NS16550A
[17179573.936000] ACPI: PCI Interrupt 0000:00:1e.3[b] -> GSI 20 (level, low) -> IRQ 233
[17179573.936000] ACPI: PCI interrupt for device 0000:00:1e.3 disabled
[17179573.936000] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[17179573.936000] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[17179573.936000] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[17179573.936000] mice: PS/2 mouse device common for all mice
[17179573.940000] EISA: Probing bus 0 at eisa.0
[17179573.940000] Cannot allocate resource for EISA slot 1
[17179573.940000] Cannot allocate resource for EISA slot 2
[17179573.940000] Cannot allocate resource for EISA slot 3
[17179573.940000] Cannot allocate resource for EISA slot 4
[17179573.940000] EISA: Detected 0 cards.
[17179573.940000] NET: Registered protocol family 2
[17179574.004000] input: AT Translated Set 2 keyboard as /class/input/input0
[17179574.072000] input: AT Translated Set 2 keyboard as /class/input/input1
[17179574.072000] atkbd.c: Spurious ACK on isa0060/serio0. Some program, like XFree86, might be trying access hardware directly.
[17179574.076000] atkbd.c: Spurious ACK on isa0060/serio0. Some program, like XFree86, might be trying access hardware directly.
[17179574.084000] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[17179574.084000] TCP established hash table entries: 131072 (order: 7, 524288 bytes)
[17179574.084000] TCP bind hash table entries: 65536 (order: 6, 262144 bytes)
[17179574.084000] TCP: Hash tables configured (established 131072 bind 65536)
[17179574.084000] TCP reno registered
[17179574.084000] TCP bic registered
[17179574.084000] NET: Registered protocol family 1
[17179574.084000] NET: Registered protocol family 8
[17179574.084000] NET: Registered protocol family 20
[17179574.084000] Using IPI Shortcut mode
[17179574.084000] ACPI wakeup devices:
[17179574.084000] RP01 RP02 RP04 USB1 USB2 USB3 USB4 USB7 LANC MODM
[17179574.084000] ACPI: (supports S0 S3 S4 S5)
[17179574.084000] Freeing unused kernel memory: 288k freed
[17179574.124000] vga16fb: initializing
[17179574.124000] vga16fb: mapped to 0xc00a0000
[17179574.236000] Console: switching to colour frame buffer device 80x25
[17179574.236000] fb0: VGA16 VGA frame buffer device
[17179575.304000] Capability LSM initialized
[17179575.332000] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3] C4[C3])
[17179575.332000] ACPI: Processor [CPU0] (supports 8 throttling states)
[17179575.444000] ACPI: Thermal Zone [THRM] (52 C)
[17179575.856000] ICH6: IDE controller at PCI slot 0000:00:1f.1
[17179575.856000] ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 185
[17179575.856000] ICH6: chipset revision 4
[17179575.856000] ICH6: not 100% native mode: will probe irqs later
[17179575.856000] ide0: BM-DMA at 0x18c0-0x18c7, BIOS settings: hda:DMA, hdb:DMA
[17179575.856000] Probing IDE interface ide0...
[17179576.144000] hda: ST9808210A, ATA DISK drive
[17179576.928000] hdb: PIONEER DVD-RW DVR-K05RA, ATAPI CD/DVD-ROM drive
[17179576.984000] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[17179576.992000] hda: max request size: 1024KiB
[17179577.000000] hda: 156301488 sectors (80026 MB) w/8192KiB Cache, CHS=16383/255/63, UDMA(33)
[17179577.000000] hda: cache flushes supported
[17179577.000000] hda: hda1 hda2 hda3
[17179577.040000] hdb: ATAPI 63X DVD-ROM DVD-R CD-R/RW drive, 2000kB Cache, UDMA(33)
[17179577.040000] Uniform CD-ROM driver Revision: 3.20
[17179577.456000] usbcore: registered new driver usbfs
[17179577.456000] usbcore: registered new driver hub
[17179577.456000] USB Universal Host Controller Interface driver v2.3
[17179577.456000] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 50
[17179577.456000] PCI: Setting latency timer of device 0000:00:1d.0 to 64
[17179577.456000] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[17179577.456000] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
[17179577.456000] uhci_hcd 0000:00:1d.0: irq 50, io base 0x00001800
[17179577.460000] hub 1-0:1.0: USB hub found
[17179577.460000] hub 1-0:1.0: 2 ports detected
[17179577.528000] ieee1394: Initialized config rom entry `ip1394'
[17179577.564000] ACPI: PCI Interrupt 0000:00:1d.1[b] -> GSI 19 (level, low) -> IRQ 58
[17179577.564000] PCI: Setting latency timer of device 0000:00:1d.1 to 64
[17179577.564000] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[17179577.564000] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
[17179577.564000] uhci_hcd 0000:00:1d.1: irq 58, io base 0x00001820
[17179577.564000] hub 2-0:1.0: USB hub found
[17179577.564000] hub 2-0:1.0: 2 ports detected
[17179577.668000] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 185
[17179577.668000] PCI: Setting latency timer of device 0000:00:1d.2 to 64
[17179577.668000] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[17179577.668000] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
[17179577.668000] uhci_hcd 0000:00:1d.2: irq 185, io base 0x00001840
[17179577.668000] hub 3-0:1.0: USB hub found
[17179577.668000] hub 3-0:1.0: 2 ports detected
[17179577.772000] ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 16 (level, low) -> IRQ 169
[17179577.772000] PCI: Setting latency timer of device 0000:00:1d.3 to 64
[17179577.772000] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[17179577.772000] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4
[17179577.772000] uhci_hcd 0000:00:1d.3: irq 169, io base 0x00001860
[17179577.772000] hub 4-0:1.0: USB hub found
[17179577.772000] hub 4-0:1.0: 2 ports detected
[17179577.876000] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 50
[17179577.876000] PCI: Setting latency timer of device 0000:00:1d.7 to 64
[17179577.876000] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[17179577.876000] ehci_hcd 0000:00:1d.7: debug port 1
[17179577.876000] PCI: cache line size of 32 is not supported by device 0000:00:1d.7
[17179577.876000] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5
[17179577.876000] ehci_hcd 0000:00:1d.7: irq 50, io mem 0xc8000000
[17179577.880000] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[17179577.880000] hub 5-0:1.0: USB hub found
[17179577.880000] hub 5-0:1.0: 8 ports detected
[17179577.984000] ohci1394: $Rev: 1313 $ Ben Collins <bcollins@debian.org>
[17179577.984000] ACPI: PCI Interrupt 0000:06:01.2[A] -> GSI 18 (level, low) -> IRQ 185
[17179578.032000] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[185] MMIO=[c8217000-c82177ff] Max Packet=[2048]
[17179578.056000] Probing IDE interface ide1...
[17179578.732000] Attempting manual resume
[17179578.756000] EXT3-fs: mounted filesystem with ordered data mode.
[17179578.772000] kjournald starting. Commit interval 5 seconds
[17179579.304000] ieee1394: Host added: ID:BUS[0-00:1023] GUID[00c09f00004f564c]
[17179588.908000] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[17179588.924000] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[17179588.980000] Linux agpgart interface v0.101 (c) Dave Jones
[17179588.980000] agpgart: Detected an Intel 915GM Chipset.
[17179589.000000] agpgart: AGP aperture is 256M @ 0x0
[17179589.628000] hw_random hardware driver 1.0.0 loaded
[17179589.712000] Real Time Clock Driver v1.12
[17179590.276000] tg3.c:v3.47 (Dec 28, 2005)
[17179590.276000] ACPI: PCI Interrupt 0000:06:08.0[A] -> GSI 16 (level, low) -> IRQ 169
[17179590.332000] eth0: Tigon3 [partno(BCM95705A50) rev 3003 PHY(5705)] (PCI:33MHz:32-bit) 10/100/1000BaseT Ethernet 00:c0:9f:ab:16:3f
[17179590.332000] eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] Split[0] WireSpeed[0] TSOcap[1]
[17179590.332000] eth0: dma_rwctrl[763f0000]
[17179590.344000] Synaptics Touchpad, model: 1, fw: 5.9, id: 0x126eb1, caps: 0xa04713/0x4000
[17179590.348000] ACPI: PCI Interrupt 0000:06:01.0[A] -> GSI 18 (level, low) -> IRQ 185
[17179590.348000] Yenta: CardBus bridge found at 0000:06:01.0 [1025:0066]
[17179590.348000] Yenta: Enabling burst memory read transactions
[17179590.348000] Yenta: Using CSCINT to route CSC interrupts to PCI
[17179590.348000] Yenta: Routing CardBus interrupts to PCI
[17179590.348000] Yenta TI: socket 0000:06:01.0, mfunc 0x01c21b22, devctl 0x64
[17179590.380000] input: SynPS/2 Synaptics TouchPad as /class/input/input2
[17179590.460000] irda_init()
[17179590.460000] NET: Registered protocol family 23
[17179590.504000] ACPI: PCI Interrupt 0000:00:1e.2[A] -> GSI 17 (level, low) -> IRQ 177
[17179590.504000] PCI: Setting latency timer of device 0000:00:1e.2 to 64
[17179590.520000] ieee80211_1_1_13_crypt: registered algorithm 'NULL'
[17179590.528000] ieee80211_1_1_13: 802.11 data/management/control stack, 1.1.13
[17179590.528000] ieee80211_1_1_13: Copyright (C) 2004-2005 Intel Corporation <jketreno@linux.intel.com>
[17179590.564000] ts: Compaq touchscreen protocol output
[17179590.584000] Yenta: ISA IRQ mask 0x0cf8, PCI irq 185
[17179590.584000] Socket status: 30000006
[17179590.584000] Yenta: Raising subordinate bus# of parent bus (#06) from #07 to #08
[17179590.584000] pcmcia: parent PCI bridge I/O window: 0x4000 - 0x4fff
[17179590.584000] cs: IO port probe 0x4000-0x4fff: clean.
[17179590.584000] pcmcia: parent PCI bridge Memory window: 0xc8200000 - 0xc82fffff
[17179590.584000] pcmcia: parent PCI bridge Memory window: 0x50000000 - 0x51ffffff
[17179590.592000] nsc_ircc_pnp_probe() : From PnP, found firbase 0x2F8 ; irq 3 ; dma 1.
[17179590.592000] nsc-ircc, chip->init
[17179590.592000] nsc-ircc, Found chip at base=0x164e
[17179590.592000] nsc-ircc, driver loaded (Dag Brattli)
[17179590.592000] nsc_ircc_open(), can't get iobase of 0x2f8
[17179590.592000] nsc-ircc, Found chip at base=0x164e
[17179590.592000] nsc-ircc, driver loaded (Dag Brattli)
[17179590.592000] nsc_ircc_open(), can't get iobase of 0x2f8
[17179590.592000] pnp: Device 00:06 disabled.
[17179590.596000] ieee80211_crypt: registered algorithm 'NULL'
[17179590.608000] ieee80211: 802.11 data/management/control stack, git-1.1.7
[17179590.608000] ieee80211: Copyright (C) 2004-2005 Intel Corporation <jketreno@linux.intel.com>
[17179590.956000] ipw2200: Intel(R) PRO/Wireless 2200/2915 Network Driver, 1.1.1
[17179590.956000] ipw2200: Copyright(c) 2003-2006 Intel Corporation
[17179590.956000] Warning: PCI driver ipw2200 has a struct device_driver shutdown method, please update!
[17179590.996000] intel8x0_measure_ac97_clock: measured 54819 usecs
[17179590.996000] intel8x0: clocking to 48000
[17179590.996000] ACPI: PCI Interrupt 0000:06:03.0[A] -> GSI 17 (level, low) -> IRQ 177
[17179590.996000] ipw2200: Detected Intel PRO/Wireless 2200BG Network Connection
[17179591.236000] ipw2200: Radio Frequency Kill Switch is On:
[17179591.236000] Kill switch must be turned off for wireless networking to work.
[17179591.236000] ipw2200: Detected geography ZZM (11 802.11bg channels, 0 802.11a channels)
[17179591.312000] cs: IO port probe 0x100-0x3af: clean.
[17179591.312000] cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7
[17179591.312000] cs: IO port probe 0x820-0x8ff: clean.
[17179591.316000] cs: IO port probe 0xc00-0xcf7: clean.
[17179591.316000] cs: IO port probe 0xa00-0xaff: clean.
[17179591.632000] lp: driver loaded but no devices found
[17179591.684000] SCSI subsystem initialized
[17179591.696000] sbp2: $Rev: 1306 $ Ben Collins <bcollins@debian.org>
[17179591.696000] ieee1394: sbp2: Driver forced to serialize I/O (serialize_io=1)
[17179591.696000] ieee1394: sbp2: Try serialize_io=0 for better performance
[17179591.744000] Adding 626524k swap on /dev/hda3. Priority:-1 extents:1 across:626524k
[17179591.876000] EXT3 FS on hda1, internal journal
[17179592.012000] md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
[17179592.012000] md: bitmap version 4.39
[17179592.016000] NET: Registered protocol family 17
[17179592.524000] device-mapper: 4.4.0-ioctl (2005-01-12) initialised: dm-devel@redhat.com
[17179593.688000] tg3: eth0: Link is up at 1000 Mbps, full duplex.
[17179593.688000] tg3: eth0: Flow control is on for TX and on for RX.
[17179594.112000] kjournald starting. Commit interval 5 seconds
[17179594.112000] EXT3 FS on hda2, internal journal
[17179594.112000] EXT3-fs: mounted filesystem with ordered data mode.
Je dois avouer que ça ne me parle pas beaucoup.
Merci.
Hors ligne
#9 Le 02/08/2006, à 00:41
- Mc_Fly23
Re : PCI: Cannot allocate resource region X of bridge 0000:00:1c.0
Salut,
J'ai le même problème que vous. Quelqu'un a trouvé une solution??
Hors ligne
#10 Le 03/08/2006, à 17:49
- Astier
Re : PCI: Cannot allocate resource region X of bridge 0000:00:1c.0
Désolé le problème traîne toujours chez moi...
Hors ligne
#11 Le 03/08/2006, à 18:00
- maxfox
Re : PCI: Cannot allocate resource region X of bridge 0000:00:1c.0
Extrait de ton dmesg :
[17179573.504000] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
As-tu essayé avec cette option ?
Dernière modification par maxfox (Le 03/08/2006, à 18:01)
Hors ligne
#12 Le 03/08/2006, à 18:53
- Astier
Re : PCI: Cannot allocate resource region X of bridge 0000:00:1c.0
Non et toi? Si oui ça a changé quelque chose?
Hors ligne
#13 Le 03/08/2006, à 19:33
- Astier
Re : PCI: Cannot allocate resource region X of bridge 0000:00:1c.0
J'ai essayé avec l'option pci=routeirq : aucun changement... 
Hors ligne
#14 Le 02/10/2006, à 23:22
- daf
Re : PCI: Cannot allocate resource region X of bridge 0000:00:1c.0
pouah moi j'ai un acer travelmate 8102 et ca met arrivé en mettant a jour de breezy a dapper, apparement il faut deja changer la partition dans le grub au niveau de "root (hd0,1)" par exemple, moi c'etait hd0,2 avant. Quel bordel j'suis completement degouté ^^ .
Hors ligne
#15 Le 03/10/2006, à 00:31
- Astier
Re : PCI: Cannot allocate resource region X of bridge 0000:00:1c.0
Moi j'ai eu ce problème après la mise à jour Breezy --> Dapper mais après un formatage complet et reinstall complet de Dapper j'ai toujours le même problème ; par contre je dois avouer que je me suis pas trop occupé de savoir quels étaient tous les périphériques utilisant le PCI ; je dois avouer que je ne pense pas avoir de problèmes avec ma carte graphique qui marche très bien, du moins je le pense.
Il faut noter quand même qu'on est pas les seuls : https://launchpad.net/distros/ubuntu/+source/linux-source-2.6.15/+bug/39138
et
https://launchpad.net/distros/ubuntu/+bug/62141
Peut-être le lecteur de cartes dont je ne me sers pas ; quelqu'un a essayé de s'en servir? Est-ce que le lecteur configuré supprime cette erreur au boot?
Hors ligne
#16 Le 03/10/2006, à 00:57
- yousteptoo
Re : PCI: Cannot allocate resource region X of bridge 0000:00:1c.0
salut Sylvain151!
ce sont des choses qui arrive ; mais ce n est pas supposer poser problemes!
ca signifie qu il n est pas capable de determiner la provenances ou la detection complete d une composante materiel.
S.V.P peut tu taper : sudo lspci -vvxxx
et donne moi le resultat
et ensuite tape : sudo lspci -vvxxx -H1 -M ( pour un test complet des bus pci)
et donne moi le resultat
ensuite je te dirai ou sont les problemes! 
A+
Hors ligne
#17 Le 04/10/2006, à 21:40
- daf
Re : PCI: Cannot allocate resource region X of bridge 0000:00:1c.0
salut, la j'ai pris pris un cd de la 6.06 à l'iut et j'ai reinstallé apres formatage, en suivant un peu les conseils de ce lien >> http://doc.ubuntu-fr.org//materiel/list … aspire1692
vu que j'avais l'ecran noir au premier demarrage, j'ai fait l'install avec un deuxieme
ecran. Bon et puis la ca a l'air d'aller mais j'ai toujours ce message au demarrage.
Je me demande si c'est pas le modem puisque la j'essaye de le configurer pour ma
connexion 56k et ca marche pas. Je vais essayer ce qu'a mis yousteptoo
voila ^^
Hors ligne
#18 Le 05/10/2006, à 04:48
- yousteptoo
Re : PCI: Cannot allocate resource region X of bridge 0000:00:1c.0
salut daf et sylvain 151
voici un autre lien qui pourrait vous aider? : http://linux-et-moi.blogspot.com/
A+
Dernière modification par yousteptoo (Le 05/10/2006, à 04:51)
Hors ligne
#19 Le 04/02/2007, à 13:15
- Feral
Re : PCI: Cannot allocate resource region X of bridge 0000:00:1c.0
Salut,
J'ai le meme problème sur un ACER 4101WLMi mais ça ne gène rien apprioris.
Sauf que j'aime bien la perfection...
Cependant je ne peux pas poster la réponse du lspci car trop long... y'a un petit truc pour le faire?
Bonne journée!
Merci!!
Hors ligne
#20 Le 11/01/2008, à 16:12
- chataigne-invité
Re : PCI: Cannot allocate resource region X of bridge 0000:00:1c.0
Bonjour,
Je viens d'installer ubuntu gutsy sur le portable de ma fille, en double boot avec un xp.
C'est un hp Pavilion avec carte graphique ati.
J'ai de gros ralentissements au démarrage, aucune image avant de voir enfin apparaà®tre la demande d'identifiant ... et les messages d'erreur :
pci cannot allocate ressource region 7...
Idem pour la 8 et la 9..
J'ai installé deux pilotes proprio : celui de la carte ati, celui d'un modem (au cas o๠ça viendrait de là )
... Je ne comprends pas trop ce qui se passe. J'ai également du installer xgl car aiglx n'était pas opérationnel sur ce portable.
J'ai jamais eu ce type de problème avec d'autres ubuntu.
Quelqu'un sait d'o๠vient cela ? (vu le nombre de posts sur le sujet...).
Amicalement et Bonne Année !!!! (et merci à tous les développeurs de nous offrir un système comme ubuntu, c'est un régal).
#21 Le 11/01/2008, à 16:20
- Feral
Re : PCI: Cannot allocate resource region X of bridge 0000:00:1c.0
J'ai exactement le même problème avec un Viao S1XP.
Il faut attendre 2 longues minutes avant de voir apparaà®tre l'interface de login!!!
Pourtant avec le LiveCD, aucun problème!
Merci de vos réponses/Idées!!!!!!!!!!!!!
======================
Hors ligne
#22 Le 16/01/2008, à 21:37
- tetedechien
Re : PCI: Cannot allocate resource region X of bridge 0000:00:1c.0
Hello,
Chez moi le pb est apparu apres un upgrade feisty > gusty.
Sous feisty tout allait bien.
Voici les erreurs qui s'affichent dans syslog :
Jan 16 20:21:57 tdch kernel: [ 13.549879] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
Jan 16 20:21:57 tdch kernel: [ 13.549972] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
Jan 16 20:21:57 tdch kernel: [ 13.550065] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 *11 12 14 15)
Jan 16 20:21:57 tdch kernel: [ 13.550159] Linux Plug and Play Support v0.97 (c) Adam Belay
Jan 16 20:21:57 tdch kernel: [ 13.550167] pnp: PnP ACPI init
Jan 16 20:21:57 tdch kernel: [ 13.550173] ACPI: bus type pnp registered
Jan 16 20:21:57 tdch kernel: [ 13.552527] pnp: PnP ACPI: found 9 devices
Jan 16 20:21:57 tdch kernel: [ 13.552530] ACPI: ACPI bus type pnp unregistered
Jan 16 20:21:57 tdch kernel: [ 13.552533] PnPBIOS: Disabled by ACPI PNP
Jan 16 20:21:57 tdch kernel: [ 13.552572] PCI: Using ACPI for IRQ routing
Jan 16 20:21:57 tdch kernel: [ 13.552575] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
Jan 16 20:21:57 tdch kernel: [ 13.552580] PCI: Cannot allocate resource region 7 of bridge 0000:00:1c.0
Jan 16 20:21:57 tdch kernel: [ 13.552624] PCI: Cannot allocate resource region 8 of bridge 0000:00:1c.0
Jan 16 20:21:57 tdch kernel: [ 13.552665] PCI: Cannot allocate resource region 9 of bridge 0000:00:1c.0
Jan 16 20:21:57 tdch kernel: [ 13.552706] PCI: Cannot allocate resource region 7 of bridge 0000:00:1c.1
Jan 16 20:21:57 tdch kernel: [ 13.552747] PCI: Cannot allocate resource region 8 of bridge 0000:00:1c.1
Jan 16 20:21:57 tdch kernel: [ 13.552788] PCI: Cannot allocate resource region 9 of bridge 0000:00:1c.1
Jan 16 20:21:57 tdch kernel: [ 13.552829] PCI: Cannot allocate resource region 7 of bridge 0000:00:1c.2
Jan 16 20:21:57 tdch kernel: [ 13.552870] PCI: Cannot allocate resource region 8 of bridge 0000:00:1c.2
Jan 16 20:21:57 tdch kernel: [ 13.552911] PCI: Cannot allocate resource region 9 of bridge 0000:00:1c.2
Jan 16 20:21:57 tdch kernel: [ 13.573887] NET: Registered protocol family 8
Jan 16 20:21:57 tdch kernel: [ 13.573889] NET: Registered protocol family 20
Jan 16 20:21:57 tdch kernel: [ 13.573932] pnp: 00:01: iomem range 0xe0000000-0xefffffff could not be reserved
Jan 16 20:21:57 tdch kernel: [ 13.573936] pnp: 00:01: iomem range 0xf0000000-0xf0003fff could not be reserved
Jan 16 20:21:57 tdch kernel: [ 13.573939] pnp: 00:01: iomem range 0xf0004000-0xf0004fff could not be reserved
Jan 16 20:21:57 tdch kernel: [ 13.573942] pnp: 00:01: iomem range 0xf0005000-0xf0005fff could not be reserved
JD'un point de vue fonctionnement, mon laptop acer est ok sur le wifi (avec la led), le lecteur de carte, les ports USB, et la 3D (meme si fglrx logue une erreur mutex).
Par contre, j'ai un pb lorsque je branche la webcam USB.
Elle est reconnu mais l'affichage ne marche pas (je précise ce point car ce moèle de webcam, ne pose à priori aucun pb).
Si qqun a une idee....
Hors ligne
#23 Le 16/01/2008, à 22:13
- TransFXB
Re : PCI: Cannot allocate resource region X of bridge 0000:00:1c.0
Pareil chez moi sur un ACER 3100, mêmes messages au démarrage mais rien qui cloche après...
Ca doit probablement venir d'une détection du matériel incorrecte (du style bridge PCI ou autre) au démarrage...
J'ai remarqué aussi qu'il y a beaucoup d'ACER concernés. Donc vraisemblablement un chipset commun (celui qui gère le bridge ou le bus PCI) qui a quelques pbs...
Mais rien de grave puisque tout fonctionne...
Blog : http://fxbpn.unblog.fr/ - Contributeur de http://www.questionsphoto.com - Créateur de http://photolinux.freeforums.org/index.php
Ubuntu 9.10
Hors ligne
#24 Le 17/01/2008, à 01:15
- Feral
Re : PCI: Cannot allocate resource region X of bridge 0000:00:1c.0
Pour "chataigne-invité"
Résolution de ton problème ici:
http://forum.ubuntu-fr.org/viewtopic.php?id=182005
Rien à voir avec les messages d'erreur.
Hors ligne