Ubuntu-fr

bloodaxe

Probleme uml KVM

Bonjour,

Je voudrais configurer le réseau sur mes VM et qu'elles puissent se joindre ainsi que l'hyperviseur. Mais ma conf ne marche pas.

Fichier /etc/network/interfaces:

auto lo eth0 tap10 br0

# The loopback network interface
iface lo inet loopback

iface eth0 inet static

iface tap10 inet manual
pre-up tunctl -b -u futex -t tap10
pre-up ifconfig tap10 up
post-down tunctl -d tap10

iface br0 inet static
bridge_ports eth0 tap10
bridge_maxwait 0
address 192.168.1.145
network 192.168.1.0
netmask 255.255.255.0
broadcast 192.168.1.255
gateway 192.168.1.1
bridge_stp off
bridge_fd 0

Déjà quand je relance le réseau ca hurle:

/etc/init.d/networking restart
 * Reconfiguring network interfaces...                                                                                                                                                                         Set 'tap10' nonpersistent
tap10: ERROR while getting interface flags: No such device
Don't seem to be have all the variables for eth0/inet.
Failed to bring up eth0.
tap10
ssh stop/waiting
ssh start/running, process 25357

Et quand je lance ma VM (pourtant en root) aussi;

# kvm -hda backtrack_4.raw -m 512 -net nic -net tap,ifname=tap10
device tap10 is already a member of a bridge; can't enslave it to bridge br0.
/etc/qemu-ifup: could not launch network script

Si quelqu'un a une idée