Ubuntu-fr

effraie

Nikon LS-4000 ED, 10.10, Udev...

Hello,

Fervent photographe argentique, je scanne mes films 35mm sous linux, avec un scanner Nikon LS-4000 ED, et Vuescann.

Aucun souci sous la 10.04, mais depuis ma MAJ vers la 10.10, j'ai un petit souci...

Xsane, comme vuescann, ne détecte le scanner que si je les lance en root, ou aprés un chmod 777 bien senti sur /dev/sg2

Je suppose qu'il s'agit d'une règle Udev a configurer corectement, mais udev, j' pige rien... alors si quelqu'un pouvais me guider un peu, ce serais super...

19:01 mathieu@vian ~% lsscsi -g     
[0:0:0:0]    disk    ATA      TOSHIBA MK1637GS DL04  /dev/sda  /dev/sg0
[1:0:0:0]    cd/dvd  TSSTcorp DVD+-RW TS-L632D DE04  /dev/sr0  /dev/sg1
[4:0:0:0]    scanner Nikon    LS-4000 ED       1.06  -         /dev/sg2

19:00 mathieu@vian ~% udevadm info -a -p /sys/class/scsi_generic/sg2

Udevadm info starts with the device specified by the devpath and then
walks up the chain of parent devices. It prints for every device
found, all possible attributes in the udev rules key format.
A rule to match, can be composed by the attributes of the device
and the attributes from one single parent device.

  looking at device '/devices/pci0000:00/0000:00:1e.0/0000:03:01.0/fw1/fw1.0/host4/target4:0:0/4:0:0:0/scsi_generic/sg2':
    KERNEL=="sg2"
    SUBSYSTEM=="scsi_generic"
    DRIVER==""

  looking at parent device '/devices/pci0000:00/0000:00:1e.0/0000:03:01.0/fw1/fw1.0/host4/target4:0:0/4:0:0:0':
    KERNELS=="4:0:0:0"
    SUBSYSTEMS=="scsi"
    DRIVERS==""
    ATTRS{device_blocked}=="0"
    ATTRS{type}=="6"
    ATTRS{scsi_level}=="3"
    ATTRS{vendor}=="Nikon   "
    ATTRS{model}=="LS-4000 ED      "
    ATTRS{rev}=="1.06"
    ATTRS{state}=="running"
    ATTRS{timeout}=="0"
    ATTRS{iocounterbits}=="32"
    ATTRS{iorequest_cnt}=="0x12b"
    ATTRS{iodone_cnt}=="0x12b"
    ATTRS{ioerr_cnt}=="0x30"
    ATTRS{modalias}=="scsi:t-0x06"
    ATTRS{evt_media_change}=="0"
    ATTRS{dh_state}=="detached"
    ATTRS{queue_depth}=="1"
    ATTRS{queue_type}=="none"
    ATTRS{ieee1394_id}=="0090b54001ffffff:00042c:0000"

  looking at parent device '/devices/pci0000:00/0000:00:1e.0/0000:03:01.0/fw1/fw1.0/host4/target4:0:0':
    KERNELS=="target4:0:0"
    SUBSYSTEMS=="scsi"
    DRIVERS==""

  looking at parent device '/devices/pci0000:00/0000:00:1e.0/0000:03:01.0/fw1/fw1.0/host4':
    KERNELS=="host4"
    SUBSYSTEMS=="scsi"
    DRIVERS==""

  looking at parent device '/devices/pci0000:00/0000:00:1e.0/0000:03:01.0/fw1/fw1.0':
    KERNELS=="fw1.0"
    SUBSYSTEMS=="firewire"
    DRIVERS=="sbp2"
    ATTRS{modalias}=="ieee1394:ven000090B5mo00004001sp0000609Ever00010483"
    ATTRS{rom_index}=="11"
    ATTRS{specifier_id}=="0x00609e"
    ATTRS{version}=="0x010483"
    ATTRS{model}=="0x004001"
    ATTRS{model_name}=="LS-4000 ED"

  looking at parent device '/devices/pci0000:00/0000:00:1e.0/0000:03:01.0/fw1':
    KERNELS=="fw1"
    SUBSYSTEMS=="firewire"
    DRIVERS==""
    ATTRS{guid}=="0x0090b54001ffffff"
    ATTRS{units}=="0x00609e:0x010483"
    ATTRS{vendor}=="0x0090b5"
    ATTRS{hardware_version}=="0x00500a"
    ATTRS{vendor_name}=="Nikon"

  looking at parent device '/devices/pci0000:00/0000:00:1e.0/0000:03:01.0':
    KERNELS=="0000:03:01.0"
    SUBSYSTEMS=="pci"
    DRIVERS=="firewire_ohci"
    ATTRS{vendor}=="0x1180"
    ATTRS{device}=="0x0832"
    ATTRS{subsystem_vendor}=="0x1028"
    ATTRS{subsystem_device}=="0x01bd"
    ATTRS{class}=="0x0c0010"
    ATTRS{irq}=="19"
    ATTRS{local_cpus}=="00000000,00000003"
    ATTRS{local_cpulist}=="0-1"
    ATTRS{modalias}=="pci:v00001180d00000832sv00001028sd000001BDbc0Csc00i10"
    ATTRS{numa_node}=="-1"
    ATTRS{dma_mask_bits}=="32"
    ATTRS{consistent_dma_mask_bits}=="32"
    ATTRS{broken_parity_status}=="0"
    ATTRS{msi_bus}==""

  looking at parent device '/devices/pci0000:00/0000:00:1e.0':
    KERNELS=="0000:00:1e.0"
    SUBSYSTEMS=="pci"
    DRIVERS==""
    ATTRS{vendor}=="0x8086"
    ATTRS{device}=="0x2448"
    ATTRS{subsystem_vendor}=="0x1028"
    ATTRS{subsystem_device}=="0x01bd"
    ATTRS{class}=="0x060401"
    ATTRS{irq}=="0"
    ATTRS{local_cpus}=="00000000,00000003"
    ATTRS{local_cpulist}=="0-1"
    ATTRS{modalias}=="pci:v00008086d00002448sv00001028sd000001BDbc06sc04i01"
    ATTRS{numa_node}=="-1"
    ATTRS{dma_mask_bits}=="32"
    ATTRS{consistent_dma_mask_bits}=="32"
    ATTRS{broken_parity_status}=="0"
    ATTRS{msi_bus}=="1"

  looking at parent device '/devices/pci0000:00':
    KERNELS=="pci0000:00"
    SUBSYSTEMS==""
    DRIVERS==""

---

400iso.net
[Trops de chefs, pas assez d'indiens]

effraie

Re : Nikon LS-4000 ED, 10.10, Udev...

personne pour m'aider a bidouiller udev ?

---

400iso.net
[Trops de chefs, pas assez d'indiens]

gl38

Re : Nikon LS-4000 ED, 10.10, Udev...

Cette page semble répondre  à ta question.
Cordialement,
Guy