Pages : 1
#1 Le 24/11/2010, à 20:53
- elnk
Installation rt3070
Bonjour,
j'ai reçu ma clé wifi il y a quelques jour avec le cd d'installation des drivers mais j'ai un problème lors de l'installation de ces drivers.
Je debut depuis quelque temps sous linux et ne comprend pas bien pourquoi l'installation ne se finalise pas.
Je vous mets ci-dessous le contenu du README_STA_usb :
* README
*
* Ralink Tech Inc.
*
* http://www.ralinktech.com
*
=======================================================================
ModelName:
===========
RT2870 Wireless Lan Linux Driver
=======================================================================
Driver lName:
===========
rt2870.o/rt2870.ko
=======================================================================
Supporting Kernel:
===================
linux kernel 2.4 and 2.6 series.
Tested in Redhat 7.3 or later.
=======================================================================
Ralink Hardware:
===================
Ralink 802.11n Wireless LAN Card.
=======================================================================
Description:
=============
This is a linux device driver for Ralink RT2870 USB ABGN WLAN Card.
=======================================================================
Contents:
=============
Makefile : Makefile
*.c : c files
*.h : header files
=======================================================================
Features:
==========
This driver implements basic IEEE802.11. Infrastructure and adhoc mode with
open or shared or WPA-PSK or WPA2-PSK authentication method.
NONE, WEP, TKIP and AES encryption.
=======================================================================
Build Instructions:
====================
1> $tar -xvzf DPB_RT2870_Linux_STA_x.x.x.x.tgz
go to "./DPB_RT2870_Linux_STA_x.x.x.x" directory.
2> In Makefile
set the "MODE = STA" in Makefile and chose the TARGET to Linux by set "TARGET = LINUX"
define the linux kernel source include file path LINUX_SRC
modify to meet your need.
3> In os/linux/config.mk
define the GCC and LD of the target machine
define the compiler flags CFLAGS
modify to meet your need.
** Build for being controlled by NetworkManager or wpa_supplicant wext functions
Please set 'HAS_WPA_SUPPLICANT=y' and 'HAS_NATIVE_WPA_SUPPLICANT_SUPPORT=y'.
=> #>cd wpa_supplicant-x.x
=> #>./wpa_supplicant -Dwext -ira0 -c wpa_supplicant.conf -d
** Build for being controlled by WpaSupplicant with Ralink Driver
Please set 'HAS_WPA_SUPPLICANT=y' and 'HAS_NATIVE_WPA_SUPPLICANT_SUPPORT=n'.
=> #>cd wpa_supplicant-0.5.7
=> #>./wpa_supplicant -Dralink -ira0 -c wpa_supplicant.conf -d
4> $make
# compile driver source code
# To fix "error: too few arguments to function ¡¥iwe_stream_add_event"
=> $patch -i os/linux/sta_ioctl.c.patch os/linux/sta_ioctl.c
5> $cp RT2870STA.dat /etc/Wireless/RT2870STA/RT2870STA.dat
6> load driver, go to "os/linux/" directory.
#[kernel 2.4]
# $/sbin/insmod rt2870sta.o
# $/sbin/ifconfig ra0 inet YOUR_IP up
#[kernel 2.6]
# $/sbin/insmod rt2870sta.ko
# $/sbin/ifconfig ra0 inet YOUR_IP up
7> unload driver
$/sbin/ifconfig ra0 down
$/sbin/rmmod rt2870sta
=======================================================================
CONFIGURATION:
====================
RT2870 driver can be configured via following interfaces,
i.e. (i)"iwconfig" command, (ii)"iwpriv" command, (iii) configuration file
i) iwconfig comes with kernel.
ii) iwpriv usage, please refer to file "iwpriv_usage.txt" for details.
iii)modify configuration file "RT2870STA.dat" in /etc/Wireless/RT2870STA/RT2870STA.dat.
Configuration File : RT2870STA.dat
---------------------------------------
# Copy this file to /etc/Wireless/RT2870STA/RT2870STA.dat
# This file is a binary file and will be read on loading rt.o module.
#
# Use "vi RT2870STA.dat" to modify settings according to your need.
#
# 1.) set NetworkType to "Adhoc" for using Adhoc-mode, otherwise using Infrastructure
# 2.) set Channel to "0" for auto-select on Infrastructure mode
# 3.) set SSID for connecting to your Accss-point.
# 4.) AuthMode can be "WEPAUTO", "OPEN", "SHARED", "WPAPSK", "WPA2PSK", "WPANONE"
# 5.) EncrypType can be "NONE", "WEP", "TKIP", "AES"
# for more information refer to the Readme file.
#
#The word of "Default" must not be removed
Default
CountryRegion=5
CountryRegionABand=7
CountryCode=
SSID=Dennis2860AP
NetworkType=Infra
WirelessMode=9
Channel=0
BeaconPeriod=100
TxPower=100
BGProtection=0
TxPreamble=0
RTSThreshold=2347
FragThreshold=2346
TxBurst=1
WmmCapable=0
AckPolicy=0;0;0;0
AuthMode=OPEN
EncrypType=NONE
WPAPSK=
DefaultKeyID=1
Key1Type=0
Key1Str=
Key2Type=0
Key2Str=
Key3Type=0
Key3Str=
Key4Type=0
Key4Str=
PSMode=CAM
FastRoaming=0
RoamThreshold=70
HT_RDG=1
HT_EXTCHA=0
HT_OpMode=1
HT_MpduDensity=4
HT_BW=1
HT_AutoBA=1
HT_BADecline=0
HT_AMSDU=0
HT_BAWinSize=64
HT_GI=1
HT_MCS=33
HT_MIMOPSMode=3
EthConvertMode=
EthCloneMac=
IEEE80211H=0
TGnWifiTest=0
WirelessEvent=0
MeshId=MESH
MeshAutoLink=1
MeshAuthMode=OPEN
MeshEncrypType=NONE
MeshWPAKEY=
MeshDefaultkey=1
MeshWEPKEY=
CarrierDetect=0
-----------------------------------------------
*NOTE:
WMM parameters
WmmCapable Set it as 1 to turn on WMM Qos support
AckPolicy1~4 Ack policy which support normal Ack or no Ack
(AC_BK, AC_BE, AC_VI, AC_VO)
All WMM parameters do not support iwpriv command but ¡¥WmmCapable¡Š¡Š,
please store all parameter to RT2870STA.dat, and restart driver.
-----------------------------------------------
syntax is 'Param'='Value' and describes below.
@> CountryRegion=value
value
0: use 1 ~ 11 Channel
1: use 1 ~ 13 Channel
2: use 10 ~ 11 Channel
3: use 10 ~ 13 Channel
4: use 14 Channel
5: use 1 ~ 14 Channel
6: use 3 ~ 9 Channel
7: use 5 ~ 13 Channel
31: use 1 ~ 14 Channel (ch1-11:active scan, ch12-14 passive scan)
@> CountryRegionABand=value
value
0: use 36, 40, 44, 48, 52, 56, 60, 64, 149, 153, 157, 161, 165 Channel
1: use 36, 40, 44, 48, 52, 56, 60, 64, 100, 104, 108, 112, 116, 120, 124, 128, 132, 136, 140 Channel
2: use 36, 40, 44, 48, 52, 56, 60, 64 Channel
3: use 52, 56, 60, 64, 149, 153, 157, 161 Channel
4: use 149, 153, 157, 161, 165 Channel
5: use 149, 153, 157, 161 Channel
6: use 36, 40, 44, 48 Channel
7: use 36, 40, 44, 48, 52, 56, 60, 64, 100, 104, 108, 112, 116, 120, 124, 128, 132, 136, 140, 149, 153, 157, 161, 165 Channel
8: use 52, 56, 60, 64 Channel
9: use 36, 40, 44, 48, 52, 56, 60, 64, 100, 104, 108, 112, 116, 132, 136, 140, 149, 153, 157, 161, 165 Channel
10: use 36, 40, 44, 48, 149, 153, 157, 161, 165 Channel
11: use 36, 40, 44, 48, 52, 56, 60, 64, 100, 104, 108, 112, 116, 120, 149, 153, 157, 161 Channel
@> CountryCode=value
value
AG, AR, AW, AU, AT, BS, BB, BM, BR, BE, BG, CA, KY, CL, CN, CO, CR, CY, CZ, DK, DO, EC, SV, FI, FR, DE,
GR, GU, GT, HT, HN, HK, HU, IS, IN, ID, IE, IL, IT, JP, JO, LV, LI, LT, LU, MY, MT, MA, MX, NL, NZ, NO,
PE, PT, PL, RO, RU, SA, CS, SG, SK, SI, ZA, KR, ES, SE, CH, TW, TR, GB, UA, AE, US, VE
"" => using default setting: 2.4 G - ch 1~11; 5G - ch 52~64, 100~140, 149~165
@> SSID=value
value
0~z, 1~32 ascii characters.
@> WirelessMode=value
value
0: legacy 11b/g mixed
1: legacy 11B only
2: legacy 11A only //Not support in RfIcType=1(id=RFIC_5225) and RfIcType=2(id=RFIC_5325)
3: legacy 11a/b/g mixed //Not support in RfIcType=1(id=RFIC_5225) and RfIcType=2(id=RFIC_5325)
4: legacy 11G only
5: 11ABGN mixed
6: 11N only
7: 11GN mixed
8: 11AN mixed
9: 11BGN mixed
10: 11AGN mixed
@> Channel=value
value
depends on CountryRegion or CountryRegionABand
@> BGProtection=value
value
0: Auto
1: Always on
2: Always off
@> TxPreamble=value
value
0:Preamble Long
1:Preamble Short
2:Auto
@> RTSThreshold=value
value
1~2347
@> FragThreshold=value
value
256~2346
@> TxBurst=value
value
0: Disable
1: Enable
@> NetworkType=value
value
Infra: infrastructure mode
Adhoc: adhoc mode
@> AuthMode=value
value
OPEN For open system
SHARED For shared key system
WEPAUTO Auto switch between OPEN and SHARED
WPAPSK For WPA pre-shared key (Infra)
WPA2PSK For WPA2 pre-shared key (Infra)
WPANONE For WPA pre-shared key (Adhoc)
WPA Use WPA-Supplicant
WPA2 Use WPA-Supplicant
@> EncrypType=value
value
NONE For AuthMode=OPEN
WEP For AuthMode=OPEN or AuthMode=SHARED
TKIP For AuthMode=WPAPSK or WPA2PSK
AES For AuthMode=WPAPSK or WPA2PSK
@> DefaultKeyID=value
value
1~4
@> Key1=value
Key2=value
Key3=value
Key4=value
value
10 or 26 hexadecimal characters eg: 012345678
5 or 13 ascii characters eg: passd
(usage : "iwpriv" only)
@> Key1Type=vaule
Key2Type=value
Key3Type=vaule
Key4Type=vaule
value
0 hexadecimal type
1 assic type
(usage : reading profile only)
@> Key1Str=value
Key2Str=value
Key3Str=vaule
Key4Str=vaule
value
10 or 26 characters (key type=0)
5 or 13 characters (key type=1)
(usage : reading profile only)
@> WPAPSK=value
value
8~63 ASCII or
64 HEX characters
@> WmmCapable=value
value
0: Disable WMM
1: Enable WMM
@> PSMode=value
value
CAM Constantly Awake Mode
Max_PSP Max Power Savings
Fast_PSP Power Save Mode
@> FastRoaming=value
value
0 Disabled
1 Enabled
@> RoamThreshold=value
value
Positive Interger(dBm)
@> HT_RDG=value
value
0 Disabled
1 Enabled
@> HT_EXTCHA=value (Extended Channel Switch Announcement)
value
0 Below
1 Above
@> HT_OpMode=value
value
0 HT mixed format
1 HT greenfield format
@> HT_MpduDensity=value
value (based on 802.11n D2.0)
0: no restriction
1: 1/4 £gs
2: 1/2 £gs
3: 1 £gs
4: 2 £gs
5: 4 £gs
6: 8 £gs
7: 16 £gs
@> HT_BW=value
value
0 20MHz
1 40MHz
@> HT_AutoBA=value
value
0 Disabled
1 Enabled
@> HT_BADecline
value
0 Disabled
1 Enabled <Reject BA request from AP>
@> HT_AMSDU=value
value
0 Disabled
1 Enabled
@> HT_BAWinSize=value
value
1 ~ 64
@> HT_GI=value
value
0 long GI
1 short GI
@> HT_MCS=value
value
0 ~ 15
33: auto
@> HT_MIMOPSMode=value
value (based on 802.11n D2.0)
0 Static SM Power Save Mode
1 Dynamic SM Power Save Mode
2 Reserved
3 SM enabled
(not fully support yet)
@> EthConvertMode=value
value
dongle
clone
hybrid
@> EthCloneMac=value
value
xx:xx:xx:xx:xx:xx
@> IEEE80211H=value
value
0 Disabled
1 Enabled
@> TGnWifiTest=value
value
0 Disabled
1 Enabled
@> WirelessEvent=value
value
0 Disabled
1 Enabled <send custom wireless event>
@> MeshId=value
value
Length 1~32 ascii characters
@> MeshAutoLink=value
value
0 Disabled
1 Enabled
@> MeshAuthMode=value
value
OPEN For open system
WPANONE For WPA pre-shared key (Adhoc)
@> MeshEncrypType=value
value
NONE For MeshAuthMode=OPEN
WEP For MeshAuthMode=OPEN
TKIP For MeshAuthMode=WPANONE
AES For MeshAuthMode=WPANONE
@> MeshWPAKEY=value
value
8~63 ASCII or
64 HEX characters
@> MeshDefaultkey=value
value
1~4
@> MeshWEPKEY=value
value
10 or 26 characters
5 or 13 characters
@> CarrierDetect=value
value
0 Disabled
1 Enabled
MORE INFORMATION
=================================================================================
If you want for rt2870 driver to auto-load at boot time:
A) choose ra0 for first RT2870 WLAN card, ra1 for second RT2870 WLAN card, etc.
B) create(edit) 'ifcfg-ra0' file in /etc/sysconfig/network-scripts/,
edit( or add the line) in /etc/modules.conf:
alias ra0 rt2870sta
C) edit(create) the file /etc/sysconfig/network-scripts/ifcfg-ra0
DEVICE='ra0'
ONBOOT='yes'
NOTE:
if you use dhcp, add this line too .
BOOTPROTO='dhcp'
*D) To ease the Default Gateway setting,
add the line
GATEWAY=x.x.x.x
in /etc/sysconfig/network
=======================================================================
Dongle/Clone Features:
======================
A) Dongle mode:
Provides a 1-to-N MAC address mapping mechanism such that more than one PC behind the STA
can transparently connect to the AP.
B) Clone mode:
Provides a 1-to-1 MAC address mapping mechanism.
STA can use own MAC as SA MAC or
use user desired MAC as SA MAC or
use source MAC of first packet coming from wired device as SA MAC.
NOTE: In this mode, only the PC who own the specified MAC can connect to the AP.
C) Hybrid mode(Dongle+Clone):
Provides a 1-to-N MAC address mapping mechanism such that more than one PC behind the STA
can transparently connect to the AP.
STA can use own MAC as SA MAC or
use user desired MAC as SA MAC or
use source MAC of first packet coming from wired device as SA MAC.
D) Please refer to "Config STA to link as dongle mode..." in iwpriv_usage.txt for releated commands.Alors je me suis placer dans le repertoire et ais ouvert un terminal et tapez :
sudo make install
eet voilà la réponse :
root@elnk-linux:~/Setup/Drivers_Alfa/2009_1110_RT3070_Linux_STA_v2.1.2.0# make install
make -C /home/elnk/Setup/Drivers_Alfa/2009_1110_RT3070_Linux_STA_v2.1.2.0/os/linux -f Makefile.6 install
mkdir: ne peut créer le répertoire `/etc/Wireless': Le fichier existe
make[1]: entrant dans le répertoire « /home/elnk/Setup/Drivers_Alfa/2009_1110_RT3070_Linux_STA_v2.1.2.0/os/linux »
rm -rf /etc/Wireless/RT3070STA
mkdir /etc/Wireless/RT3070STA
cp /home/elnk/Setup/Drivers_Alfa/2009_1110_RT3070_Linux_STA_v2.1.2.0/RT2870STA.dat /etc/Wireless/RT3070STA/.
install -d /lib/modules/2.6.35-23-generic/kernel/drivers/net/wireless/
install -m 644 -c rt3070sta.ko /lib/modules/2.6.35-23-generic/kernel/drivers/net/wireless/
install: ne peut évaluer `rt3070sta.ko': Aucun fichier ou dossier de ce type
make[1]: *** [install] Erreur 1
make[1]: quittant le répertoire « /home/elnk/Setup/Drivers_Alfa/2009_1110_RT3070_Linux_STA_v2.1.2.0/os/linux »
make: *** [install] Erreur 2
root@elnk-linux:~/Setup/Drivers_Alfa/2009_1110_RT3070_Linux_STA_v2.1.2.0# Si quelqu'un pouvait m'éclairer sur les marches à suivre ou m'apporter une solution je lui en serait reconnaissant.
Je vous remercie,
Hors ligne
#2 Le 24/11/2010, à 21:24
- Vysserk3
Re : Installation rt3070
Il faut faire un make avant le make install
Hors ligne
#3 Le 24/11/2010, à 21:27
- savanus
Re : Installation rt3070
bonsoir,
regarde sur ce site http://www.crack-wifi.com/forum/viewtopic.php?id=2169
en espérant que ça t'aide....
librement !!
ubuntu unity 11.04 natty
* dell inspiron 1501* AMD Athlon 64 X2 * 2GB DDR2 * 2,8GHz *
Hors ligne
#4 Le 24/11/2010, à 21:36
- elnk
Re : Installation rt3070
Bonsoir savanus,
J'avais en effet déjà vu ce poste sur d'autres forum, mais il semblerait que depuis peut la commande
git clone git://git.popipo.fr/home/benoit/rt2x00.git
est refusé 
donc je ne peux pas faire grand chose.
Merci Vysserk3 j'essai ça et je vous tien informé !
Hors ligne
#5 Le 24/11/2010, à 22:03
- elnk
Re : Installation rt3070
Erf même avec un make avan de faire un make install ca ne fonctionne pas
Voilà le résultat donné par les 2 commandes :
elnk@elnk-linux:~/Setup/Drivers_Alfa/2009_1110_RT3070_Linux_STA_v2.1.2.0$ sudo make
[sudo] password for elnk:
make -C tools
make[1]: entrant dans le répertoire « /home/elnk/Setup/Drivers_Alfa/2009_1110_RT3070_Linux_STA_v2.1.2.0/tools »
gcc -g bin2h.c -o bin2h
make[1]: quittant le répertoire « /home/elnk/Setup/Drivers_Alfa/2009_1110_RT3070_Linux_STA_v2.1.2.0/tools »
/home/elnk/Setup/Drivers_Alfa/2009_1110_RT3070_Linux_STA_v2.1.2.0/tools/bin2h
cp -f os/linux/Makefile.6 /home/elnk/Setup/Drivers_Alfa/2009_1110_RT3070_Linux_STA_v2.1.2.0/os/linux/Makefile
make -C /lib/modules/2.6.35-23-generic/build SUBDIRS=/home/elnk/Setup/Drivers_Alfa/2009_1110_RT3070_Linux_STA_v2.1.2.0/os/linux modules
make[1]: entrant dans le répertoire « /usr/src/linux-headers-2.6.35-23-generic »
CC [M] /home/elnk/Setup/Drivers_Alfa/2009_1110_RT3070_Linux_STA_v2.1.2.0/os/linux/../../common/crypt_md5.o
CC [M] /home/elnk/Setup/Drivers_Alfa/2009_1110_RT3070_Linux_STA_v2.1.2.0/os/linux/../../common/crypt_sha2.o
CC [M] /home/elnk/Setup/Drivers_Alfa/2009_1110_RT3070_Linux_STA_v2.1.2.0/os/linux/../../common/crypt_hmac.o
CC [M] /home/elnk/Setup/Drivers_Alfa/2009_1110_RT3070_Linux_STA_v2.1.2.0/os/linux/../../common/mlme.o
/home/elnk/Setup/Drivers_Alfa/2009_1110_RT3070_Linux_STA_v2.1.2.0/os/linux/../../common/mlme.c: In function 'BssTableSortByRssi':
/home/elnk/Setup/Drivers_Alfa/2009_1110_RT3070_Linux_STA_v2.1.2.0/os/linux/../../common/mlme.c:4406: warning: the frame size of 1572 bytes is larger than 1024 bytes
CC [M] /home/elnk/Setup/Drivers_Alfa/2009_1110_RT3070_Linux_STA_v2.1.2.0/os/linux/../../common/cmm_wep.o
CC [M] /home/elnk/Setup/Drivers_Alfa/2009_1110_RT3070_Linux_STA_v2.1.2.0/os/linux/../../common/action.o
CC [M] /home/elnk/Setup/Drivers_Alfa/2009_1110_RT3070_Linux_STA_v2.1.2.0/os/linux/../../common/cmm_data.o
CC [M] /home/elnk/Setup/Drivers_Alfa/2009_1110_RT3070_Linux_STA_v2.1.2.0/os/linux/../../common/rtmp_init.o
/home/elnk/Setup/Drivers_Alfa/2009_1110_RT3070_Linux_STA_v2.1.2.0/os/linux/../../common/rtmp_init.c: In function 'RtmpRaDevCtrlInit':
/home/elnk/Setup/Drivers_Alfa/2009_1110_RT3070_Linux_STA_v2.1.2.0/os/linux/../../common/rtmp_init.c:3710: warning: passing argument 2 of 'os_alloc_mem' from incompatible pointer type
/home/elnk/Setup/Drivers_Alfa/2009_1110_RT3070_Linux_STA_v2.1.2.0/include/rtmp.h:5704: note: expected 'UCHAR **' but argument is of type 'UCHAR *'
CC [M] /home/elnk/Setup/Drivers_Alfa/2009_1110_RT3070_Linux_STA_v2.1.2.0/os/linux/../../common/cmm_tkip.o
CC [M] /home/elnk/Setup/Drivers_Alfa/2009_1110_RT3070_Linux_STA_v2.1.2.0/os/linux/../../common/cmm_aes.o
/home/elnk/Setup/Drivers_Alfa/2009_1110_RT3070_Linux_STA_v2.1.2.0/os/linux/../../common/cmm_aes.c: In function 'AES_GTK_KEY_WRAP':
/home/elnk/Setup/Drivers_Alfa/2009_1110_RT3070_Linux_STA_v2.1.2.0/os/linux/../../common/cmm_aes.c:1338: warning: the frame size of 1092 bytes is larger than 1024 bytes
CC [M] /home/elnk/Setup/Drivers_Alfa/2009_1110_RT3070_Linux_STA_v2.1.2.0/os/linux/../../common/cmm_sync.o
CC [M] /home/elnk/Setup/Drivers_Alfa/2009_1110_RT3070_Linux_STA_v2.1.2.0/os/linux/../../common/eeprom.o
CC [M] /home/elnk/Setup/Drivers_Alfa/2009_1110_RT3070_Linux_STA_v2.1.2.0/os/linux/../../common/cmm_sanity.o
CC [M] /home/elnk/Setup/Drivers_Alfa/2009_1110_RT3070_Linux_STA_v2.1.2.0/os/linux/../../common/cmm_info.o
CC [M] /home/elnk/Setup/Drivers_Alfa/2009_1110_RT3070_Linux_STA_v2.1.2.0/os/linux/../../common/cmm_cfg.o
CC [M] /home/elnk/Setup/Drivers_Alfa/2009_1110_RT3070_Linux_STA_v2.1.2.0/os/linux/../../common/cmm_wpa.o
CC [M] /home/elnk/Setup/Drivers_Alfa/2009_1110_RT3070_Linux_STA_v2.1.2.0/os/linux/../../common/dfs.o
CC [M] /home/elnk/Setup/Drivers_Alfa/2009_1110_RT3070_Linux_STA_v2.1.2.0/os/linux/../../common/spectrum.o
CC [M] /home/elnk/Setup/Drivers_Alfa/2009_1110_RT3070_Linux_STA_v2.1.2.0/os/linux/../../common/rtmp_timer.o
CC [M] /home/elnk/Setup/Drivers_Alfa/2009_1110_RT3070_Linux_STA_v2.1.2.0/os/linux/../../common/rt_channel.o
CC [M] /home/elnk/Setup/Drivers_Alfa/2009_1110_RT3070_Linux_STA_v2.1.2.0/os/linux/../../common/cmm_profile.o
CC [M] /home/elnk/Setup/Drivers_Alfa/2009_1110_RT3070_Linux_STA_v2.1.2.0/os/linux/../../common/cmm_asic.o
CC [M] /home/elnk/Setup/Drivers_Alfa/2009_1110_RT3070_Linux_STA_v2.1.2.0/os/linux/../../common/cmm_cmd.o
CC [M] /home/elnk/Setup/Drivers_Alfa/2009_1110_RT3070_Linux_STA_v2.1.2.0/os/linux/../../sta/assoc.o
/home/elnk/Setup/Drivers_Alfa/2009_1110_RT3070_Linux_STA_v2.1.2.0/os/linux/../../sta/assoc.c: In function 'wext_notify_event_assoc':
/home/elnk/Setup/Drivers_Alfa/2009_1110_RT3070_Linux_STA_v2.1.2.0/os/linux/../../sta/assoc.c:1401: warning: pointer targets in passing argument 5 of 'RtmpOSWrielessEventSend' differ in signedness
/home/elnk/Setup/Drivers_Alfa/2009_1110_RT3070_Linux_STA_v2.1.2.0/include/rtmp.h:7048: note: expected 'PUCHAR' but argument is of type 'char *'
CC [M] /home/elnk/Setup/Drivers_Alfa/2009_1110_RT3070_Linux_STA_v2.1.2.0/os/linux/../../sta/auth.o
CC [M] /home/elnk/Setup/Drivers_Alfa/2009_1110_RT3070_Linux_STA_v2.1.2.0/os/linux/../../sta/auth_rsp.o
CC [M] /home/elnk/Setup/Drivers_Alfa/2009_1110_RT3070_Linux_STA_v2.1.2.0/os/linux/../../sta/sync.o
/home/elnk/Setup/Drivers_Alfa/2009_1110_RT3070_Linux_STA_v2.1.2.0/os/linux/../../sta/sync.c: In function 'PeerBeaconAtScanAction':
/home/elnk/Setup/Drivers_Alfa/2009_1110_RT3070_Linux_STA_v2.1.2.0/os/linux/../../sta/sync.c:657: warning: the frame size of 1252 bytes is larger than 1024 bytes
/home/elnk/Setup/Drivers_Alfa/2009_1110_RT3070_Linux_STA_v2.1.2.0/os/linux/../../sta/sync.c: In function 'PeerBeacon':
/home/elnk/Setup/Drivers_Alfa/2009_1110_RT3070_Linux_STA_v2.1.2.0/os/linux/../../sta/sync.c:1435: warning: the frame size of 1312 bytes is larger than 1024 bytes
/home/elnk/Setup/Drivers_Alfa/2009_1110_RT3070_Linux_STA_v2.1.2.0/os/linux/../../sta/sync.c: In function 'PeerBeaconAtJoinAction':
/home/elnk/Setup/Drivers_Alfa/2009_1110_RT3070_Linux_STA_v2.1.2.0/os/linux/../../sta/sync.c:935: warning: the frame size of 1260 bytes is larger than 1024 bytes
/home/elnk/Setup/Drivers_Alfa/2009_1110_RT3070_Linux_STA_v2.1.2.0/os/linux/../../sta/sync.c: In function 'MlmeStartReqAction':
/home/elnk/Setup/Drivers_Alfa/2009_1110_RT3070_Linux_STA_v2.1.2.0/os/linux/../../sta/sync.c:525: warning: the frame size of 1064 bytes is larger than 1024 bytes
CC [M] /home/elnk/Setup/Drivers_Alfa/2009_1110_RT3070_Linux_STA_v2.1.2.0/os/linux/../../sta/sanity.o
CC [M] /home/elnk/Setup/Drivers_Alfa/2009_1110_RT3070_Linux_STA_v2.1.2.0/os/linux/../../sta/rtmp_data.o
CC [M] /home/elnk/Setup/Drivers_Alfa/2009_1110_RT3070_Linux_STA_v2.1.2.0/os/linux/../../sta/connect.o
/home/elnk/Setup/Drivers_Alfa/2009_1110_RT3070_Linux_STA_v2.1.2.0/os/linux/../../sta/connect.c: In function 'LinkDown':
/home/elnk/Setup/Drivers_Alfa/2009_1110_RT3070_Linux_STA_v2.1.2.0/os/linux/../../sta/connect.c:1975: warning: unused variable 'Cancelled'
/home/elnk/Setup/Drivers_Alfa/2009_1110_RT3070_Linux_STA_v2.1.2.0/os/linux/../../sta/connect.c: In function 'CntlOidScanProc':
/home/elnk/Setup/Drivers_Alfa/2009_1110_RT3070_Linux_STA_v2.1.2.0/os/linux/../../sta/connect.c:343: warning: the frame size of 1600 bytes is larger than 1024 bytes
CC [M] /home/elnk/Setup/Drivers_Alfa/2009_1110_RT3070_Linux_STA_v2.1.2.0/os/linux/../../sta/wpa.o
CC [M] /home/elnk/Setup/Drivers_Alfa/2009_1110_RT3070_Linux_STA_v2.1.2.0/os/linux/../../os/linux/rt_linux.o
/home/elnk/Setup/Drivers_Alfa/2009_1110_RT3070_Linux_STA_v2.1.2.0/os/linux/../../os/linux/rt_linux.c: In function 'send_monitor_packets':
/home/elnk/Setup/Drivers_Alfa/2009_1110_RT3070_Linux_STA_v2.1.2.0/os/linux/../../os/linux/rt_linux.c:982: warning: the frame size of 1084 bytes is larger than 1024 bytes
CC [M] /home/elnk/Setup/Drivers_Alfa/2009_1110_RT3070_Linux_STA_v2.1.2.0/os/linux/../../os/linux/rt_profile.o
CC [M] /home/elnk/Setup/Drivers_Alfa/2009_1110_RT3070_Linux_STA_v2.1.2.0/os/linux/../../os/linux/rt_main_dev.o
CC [M] /home/elnk/Setup/Drivers_Alfa/2009_1110_RT3070_Linux_STA_v2.1.2.0/os/linux/../../os/linux/sta_ioctl.o
/home/elnk/Setup/Drivers_Alfa/2009_1110_RT3070_Linux_STA_v2.1.2.0/os/linux/../../os/linux/sta_ioctl.c: In function 'rt_ioctl_siwencode':
/home/elnk/Setup/Drivers_Alfa/2009_1110_RT3070_Linux_STA_v2.1.2.0/os/linux/../../os/linux/sta_ioctl.c:1839: warning: suggest parentheses around operand of '!' or change '&' to '&&' or '!' to '~'
/home/elnk/Setup/Drivers_Alfa/2009_1110_RT3070_Linux_STA_v2.1.2.0/os/linux/../../os/linux/sta_ioctl.c: In function 'RTMPIoctlRF':
/home/elnk/Setup/Drivers_Alfa/2009_1110_RT3070_Linux_STA_v2.1.2.0/os/linux/../../os/linux/sta_ioctl.c:7179: warning: pointer targets in passing argument 1 of 'strchr' differ in signedness
/usr/src/linux-headers-2.6.35-23-generic/arch/x86/include/asm/string_32.h:27: note: expected 'const char *' but argument is of type 'CHAR *'
/home/elnk/Setup/Drivers_Alfa/2009_1110_RT3070_Linux_STA_v2.1.2.0/os/linux/../../os/linux/sta_ioctl.c:7179: warning: pointer targets in assignment differ in signedness
/home/elnk/Setup/Drivers_Alfa/2009_1110_RT3070_Linux_STA_v2.1.2.0/os/linux/../../os/linux/sta_ioctl.c: In function 'rt_ioctl_iwaplist':
/home/elnk/Setup/Drivers_Alfa/2009_1110_RT3070_Linux_STA_v2.1.2.0/os/linux/../../os/linux/sta_ioctl.c:1037: warning: the frame size of 1288 bytes is larger than 1024 bytes
/home/elnk/Setup/Drivers_Alfa/2009_1110_RT3070_Linux_STA_v2.1.2.0/os/linux/../../os/linux/sta_ioctl.c: In function 'rt_ioctl_siwmlme':
/home/elnk/Setup/Drivers_Alfa/2009_1110_RT3070_Linux_STA_v2.1.2.0/os/linux/../../os/linux/sta_ioctl.c:2321: warning: the frame size of 1584 bytes is larger than 1024 bytes
/home/elnk/Setup/Drivers_Alfa/2009_1110_RT3070_Linux_STA_v2.1.2.0/os/linux/../../os/linux/sta_ioctl.c: In function 'RTMPIoctlRF':
/home/elnk/Setup/Drivers_Alfa/2009_1110_RT3070_Linux_STA_v2.1.2.0/os/linux/../../os/linux/sta_ioctl.c:7315: warning: the frame size of 2328 bytes is larger than 1024 bytes
/home/elnk/Setup/Drivers_Alfa/2009_1110_RT3070_Linux_STA_v2.1.2.0/os/linux/../../os/linux/sta_ioctl.c: In function 'RTMPIoctlE2PROM':
/home/elnk/Setup/Drivers_Alfa/2009_1110_RT3070_Linux_STA_v2.1.2.0/os/linux/../../os/linux/sta_ioctl.c:7131: warning: the frame size of 1348 bytes is larger than 1024 bytes
/home/elnk/Setup/Drivers_Alfa/2009_1110_RT3070_Linux_STA_v2.1.2.0/os/linux/../../os/linux/sta_ioctl.c: In function 'RTMPIoctlMAC':
/home/elnk/Setup/Drivers_Alfa/2009_1110_RT3070_Linux_STA_v2.1.2.0/os/linux/../../os/linux/sta_ioctl.c:6933: warning: the frame size of 1344 bytes is larger than 1024 bytes
CC [M] /home/elnk/Setup/Drivers_Alfa/2009_1110_RT3070_Linux_STA_v2.1.2.0/os/linux/../../common/ba_action.o
CC [M] /home/elnk/Setup/Drivers_Alfa/2009_1110_RT3070_Linux_STA_v2.1.2.0/os/linux/../../os/linux/usb_main_dev.o
/home/elnk/Setup/Drivers_Alfa/2009_1110_RT3070_Linux_STA_v2.1.2.0/os/linux/../../os/linux/usb_main_dev.c: In function 'RTUSBWatchDog':
/home/elnk/Setup/Drivers_Alfa/2009_1110_RT3070_Linux_STA_v2.1.2.0/os/linux/../../os/linux/usb_main_dev.c:758: warning: format '%d' expects type 'int', but argument 3 has type 'ULONG'
CC [M] /home/elnk/Setup/Drivers_Alfa/2009_1110_RT3070_Linux_STA_v2.1.2.0/os/linux/../../os/linux/rt_usb.o
CC [M] /home/elnk/Setup/Drivers_Alfa/2009_1110_RT3070_Linux_STA_v2.1.2.0/os/linux/../../common/cmm_mac_usb.o
/home/elnk/Setup/Drivers_Alfa/2009_1110_RT3070_Linux_STA_v2.1.2.0/os/linux/../../common/cmm_mac_usb.c: In function 'NICInitRecv':
/home/elnk/Setup/Drivers_Alfa/2009_1110_RT3070_Linux_STA_v2.1.2.0/os/linux/../../common/cmm_mac_usb.c:83: error: implicit declaration of function 'usb_buffer_alloc'
/home/elnk/Setup/Drivers_Alfa/2009_1110_RT3070_Linux_STA_v2.1.2.0/os/linux/../../common/cmm_mac_usb.c:83: warning: assignment makes pointer from integer without a cast
/home/elnk/Setup/Drivers_Alfa/2009_1110_RT3070_Linux_STA_v2.1.2.0/os/linux/../../common/cmm_mac_usb.c:112: error: implicit declaration of function 'usb_buffer_free'
make[2]: *** [/home/elnk/Setup/Drivers_Alfa/2009_1110_RT3070_Linux_STA_v2.1.2.0/os/linux/../../common/cmm_mac_usb.o] Erreur 1
make[1]: *** [_module_/home/elnk/Setup/Drivers_Alfa/2009_1110_RT3070_Linux_STA_v2.1.2.0/os/linux] Erreur 2
make[1]: quittant le répertoire « /usr/src/linux-headers-2.6.35-23-generic »
make: *** [LINUX] Erreur 2
elnk@elnk-linux:~/Setup/Drivers_Alfa/2009_1110_RT3070_Linux_STA_v2.1.2.0$ sudo make install
make -C /home/elnk/Setup/Drivers_Alfa/2009_1110_RT3070_Linux_STA_v2.1.2.0/os/linux -f Makefile.6 install
mkdir: ne peut créer le répertoire `/etc/Wireless': Le fichier existe
make[1]: entrant dans le répertoire « /home/elnk/Setup/Drivers_Alfa/2009_1110_RT3070_Linux_STA_v2.1.2.0/os/linux »
rm -rf /etc/Wireless/RT3070STA
mkdir /etc/Wireless/RT3070STA
cp /home/elnk/Setup/Drivers_Alfa/2009_1110_RT3070_Linux_STA_v2.1.2.0/RT2870STA.dat /etc/Wireless/RT3070STA/.
install -d /lib/modules/2.6.35-23-generic/kernel/drivers/net/wireless/
install -m 644 -c rt3070sta.ko /lib/modules/2.6.35-23-generic/kernel/drivers/net/wireless/
install: ne peut évaluer `rt3070sta.ko': Aucun fichier ou dossier de ce type
make[1]: *** [install] Erreur 1
make[1]: quittant le répertoire « /home/elnk/Setup/Drivers_Alfa/2009_1110_RT3070_Linux_STA_v2.1.2.0/os/linux »
make: *** [install] Erreur 2
elnk@elnk-linux:~/Setup/Drivers_Alfa/2009_1110_RT3070_Linux_STA_v2.1.2.0$ Hors ligne
#6 Le 26/11/2010, à 13:43
- elnk
Re : Installation rt3070
up ??
Hors ligne
#7 Le 26/11/2010, à 14:26
- Vysserk3
Re : Installation rt3070
Salut,
Essaye de suivre à la lettre les instruction de construction du README que tu as postés en premier lieu. A mon avis, il y a peut être des étapes à faire avant de lancer le make 
(le make install quand la compilation a réussi et que t'as réussi à charger le driver puis que tu arrives à te connecter à un réseau). Bref, il ne faut pas brûler d'étapes
Hors ligne
#8 Le 27/11/2010, à 19:10
- elnk
Re : Installation rt3070
Oki merci 
je me relance dans le README 
Hors ligne
Pages : 1