Pages : 1
#1 Le 28/11/2010, à 10:09
- sheep
Auto-hebergement, nom de domaine et freebox
Bonjour à tous.
Je souhaite héberger des sites web sur le serveur que j'ai mis en place au fond de mon garage.
Pour le moment, le serveur (sous apache2) fonctionne bien, quand je rentre mon IP j'y accède sans problème.
Il est certainement mal sécurisé, mais je me pencherai sur ce problème après.
Mon souci actuel est donc, que je voudrais faire pointer des nom de domaines différents sur ce serveur unique.
J'ai déjà configurer apache2 pour utiliser les virtuals hosts, comme indiqué dans la page de la doc. (celle-là).
De ce fait, si je tape mon ip/le_nom de domaine, j'arrive bien où je veux.
Maintenant, je souhaite que, lorsque je tape un nom de domaine m'appartenant, celui si soit rediriger automatiquement sur le serveur, derrière la Freebox, sur le bon site, sans que cela soit un sous-domaine de quelque-chose.
En gros, si j'ai bien compris tout ce que j'ai lu à droite et à gauche sur le web, je cherche à faire un serveur mutualisé.
Donc:
Est-ce possible de faire ça avec une Freebox?
Si oui, comment on s'y prend?
Merci d'avance de vos éclaircissements.
Dernière modification par sheep (Le 03/01/2011, à 08:04)
Save water, Drink beer
Hors ligne
#2 Le 28/11/2010, à 11:15
- Merrick
Re : Auto-hebergement, nom de domaine et freebox
C'et techniquement possible (même si la fb en hébergement n'est pas forcément un modèle de disponibilité).
- dans l'interface de ta fb, il faut rediriger le port 80 en tcp vers ton serveur
- modifier les dns pour que tous les www. de tes domaines pointent vers ton adresse ip publique
- c'est parfois utile de rajouter tous les www des domaines dans le /etc/hosts de ton serveur en 127.0.0.1
- régler les virtualhosts d'apache en mettant bien la bonne valeur dans le ServerName pour chaque (www.mondomaine1.com, etc...)
- redémarrer apache
Normalement, c'est bon.
Si tu ne rediriges que le port 80, tu as un minimum de sécurité. Si tu rediriges tout le trafic, je te conseille d'utiliser ufw/fail2ban pour gérer les blocages (tout est dans la doc), et je te conseille d'installer munin sur le serveur pour surveiller la charge et les anomalies éventuelles.
Hors ligne
#3 Le 28/11/2010, à 11:17
- Tycho Brahe
Re : Auto-hebergement, nom de domaine et freebox
Salut,
Ceci n'a rien à voir avec ton serveur ou ta freebox, il te faut configurer les entrées CNAME de ton nom de domaine. Normalement ton registar doit te proposer un panneau d'administration pour pouvoir faire ça.
Loi de Newton :
Si tu restes à glander sous le pommier, tu pourrais bien prendre une pomme sur la gueule.
Hors ligne
#4 Le 28/11/2010, à 11:52
- sheep
Re : Auto-hebergement, nom de domaine et freebox
Je vous remercie pour ces réponses, effectivement, le simple changement de cname à résolu le problème.
Je ne sais pas pourquoi je voulais que cela soit plus compliqué
Save water, Drink beer
Hors ligne
#5 Le 03/01/2011, à 08:04
- sheep
Re : Auto-hebergement, nom de domaine et freebox
Bonjour,
Je rouvre mon post pour un petit problème qui me dérange.
J'ai donc installé un site sur mon serveur, c'est un peu lent mais ça marche bien.
Mon souci est le suivant :
quand je tape le nom de domaine dans la barre (http://monsite.fr), j'arrive sur le site, mais le navigateur me colle l'adresse ip du serveur. (http://xxx.xxx.xxx.xxx/monsite.fr)
Le serveur est configuré avec des virtuals host, afin de permettre l'adjonction d'autres nom de domaine.
Le registar ne me propose pas de solution acceptable pour régler ce problème: la navigation dite "transparente" englobe le site dans des frames ce que je ne souhaite pas.
Malgré mes lectures sur les configuration d'Apache, je n'ai pas trouvé de solution (serait-ce la bière des fêtes ? ).
La question donc:
Comment configurer apache et les virtualhost pour que n'apparaisse dans la barre d'adresse que le nom de domaine, et pas l'adresse ip du serveur?
Merci de votre aide.
Dernière modification par sheep (Le 03/01/2011, à 08:05)
Save water, Drink beer
Hors ligne
#6 Le 03/01/2011, à 10:18
- sputnick
Re : Auto-hebergement, nom de domaine et freebox
wget http://www.sputnick-area.net/scripts/add_vhost.bash
chmod +x add_vhost.bash
./add_vhost.bash
On ne peut pas mettre d'array dans un string!
https://sputnick.fr/
Hors ligne
#7 Le 03/01/2011, à 20:39
- sheep
Re : Auto-hebergement, nom de domaine et freebox
merci de ta réponse sputnick, cependant après avoir lu (dès fois que ce soit un script bizzare ) et exécuter ton script, rien ne change à mon problème.
J'ai peut-être mal fait un truc, peux-tu expliciter la méthode ?
Save water, Drink beer
Hors ligne
#8 Le 03/01/2011, à 22:54
- sputnick
Re : Auto-hebergement, nom de domaine et freebox
C'est pas de la magie. Faut renseigner les bonnes infos comme indiqué dans l'aide
On ne peut pas mettre d'array dans un string!
https://sputnick.fr/
Hors ligne
#9 Le 04/01/2011, à 07:38
- sheep
Re : Auto-hebergement, nom de domaine et freebox
C'est bien ce que j'ai fait:
./add_vhost.bash -v monsite.fr -c email@domaine.fr
(pas besoin de ssl)
Réponse de la console :
/etc/apache2/sites-available/monsite.fr existe deja !
je reste dubitatif.
Save water, Drink beer
Hors ligne
#10 Le 04/01/2011, à 09:49
- sputnick
Re : Auto-hebergement, nom de domaine et freebox
Ah ba
mv
ton ancien fichier ailleurs en attendant
On ne peut pas mettre d'array dans un string!
https://sputnick.fr/
Hors ligne
#11 Le 04/01/2011, à 16:50
- leglen38
Re : Auto-hebergement, nom de domaine et freebox
Bonjour,
comment as tu configuré tes vhosts ?
Tu pourrais nous donner le contenu de tes conf Apache ? des tes Vhosts ?
Merci
Hors ligne
#12 Le 04/01/2011, à 18:33
- sheep
Re : Auto-hebergement, nom de domaine et freebox
conf apache (rien bricoler dedans en principe)
cat /etc/apache2/apache2.conf
#
# Based upon the NCSA server configuration files originally by Rob McCool.
#
# This is the main Apache server configuration file. It contains the
# configuration directives that give the server its instructions.
# See http://httpd.apache.org/docs/2.2/ for detailed information about
# the directives.
#
# Do NOT simply read the instructions in here without understanding
# what they do. They're here only as hints or reminders. If you are unsure
# consult the online docs. You have been warned.
#
# The configuration directives are grouped into three basic sections:
# 1. Directives that control the operation of the Apache server process as a
# whole (the 'global environment').
# 2. Directives that define the parameters of the 'main' or 'default' server,
# which responds to requests that aren't handled by a virtual host.
# These directives also provide default values for the settings
# of all virtual hosts.
# 3. Settings for virtual hosts, which allow Web requests to be sent to
# different IP addresses or hostnames and have them handled by the
# same Apache server process.
#
# Configuration and logfile names: If the filenames you specify for many
# of the server's control files begin with "/" (or "drive:/" for Win32), the
# server will use that explicit path. If the filenames do *not* begin
# with "/", the value of ServerRoot is prepended -- so "/var/log/apache2/foo.log"
# with ServerRoot set to "" will be interpreted by the
# server as "//var/log/apache2/foo.log".
#
### Section 1: Global Environment
#
# The directives in this section affect the overall operation of Apache,
# such as the number of concurrent requests it can handle or where it
# can find its configuration files.
#
#
# ServerRoot: The top of the directory tree under which the server's
# configuration, error, and log files are kept.
#
# NOTE! If you intend to place this on an NFS (or otherwise network)
# mounted filesystem then please read the LockFile documentation (available
# at <URL:http://httpd.apache.org/docs-2.1/mod/mpm_common.html#lockfile>);
# you will save yourself a lot of trouble.
#
# Do NOT add a slash at the end of the directory path.
#
ServerRoot "/etc/apache2"
#
# The accept serialization lock file MUST BE STORED ON A LOCAL DISK.
#
#<IfModule !mpm_winnt.c>
#<IfModule !mpm_netware.c>
LockFile /var/lock/apache2/accept.lock
#</IfModule>
#</IfModule>
#
# PidFile: The file in which the server should record its process
# identification number when it starts.
# This needs to be set in /etc/apache2/envvars
#
PidFile ${APACHE_PID_FILE}
#
# Timeout: The number of seconds before receives and sends time out.
#
Timeout 300
#
# KeepAlive: Whether or not to allow persistent connections (more than
# one request per connection). Set to "Off" to deactivate.
#
KeepAlive On
#
# MaxKeepAliveRequests: The maximum number of requests to allow
# during a persistent connection. Set to 0 to allow an unlimited amount.
# We recommend you leave this number high, for maximum performance.
#
MaxKeepAliveRequests 100
#
# KeepAliveTimeout: Number of seconds to wait for the next request from the
# same client on the same connection.
#
KeepAliveTimeout 15
##
## Server-Pool Size Regulation (MPM specific)
##
# prefork MPM
# StartServers: number of server processes to start
# MinSpareServers: minimum number of server processes which are kept spare
# MaxSpareServers: maximum number of server processes which are kept spare
# MaxClients: maximum number of server processes allowed to start
# MaxRequestsPerChild: maximum number of requests a server process serves
<IfModule mpm_prefork_module>
StartServers 5
MinSpareServers 5
MaxSpareServers 10
MaxClients 150
MaxRequestsPerChild 0
</IfModule>
# worker MPM
# StartServers: initial number of server processes to start
# MaxClients: maximum number of simultaneous client connections
# MinSpareThreads: minimum number of worker threads which are kept spare
# MaxSpareThreads: maximum number of worker threads which are kept spare
# ThreadsPerChild: constant number of worker threads in each server process
# MaxRequestsPerChild: maximum number of requests a server process serves
<IfModule mpm_worker_module>
StartServers 2
MaxClients 150
MinSpareThreads 25
MaxSpareThreads 75
ThreadsPerChild 25
MaxRequestsPerChild 0
</IfModule>
# These need to be set in /etc/apache2/envvars
User ${APACHE_RUN_USER}
Group ${APACHE_RUN_GROUP}
#
# AccessFileName: The name of the file to look for in each directory
# for additional configuration directives. See also the AllowOverride
# directive.
#
AccessFileName .htaccess
#
# The following lines prevent .htaccess and .htpasswd files from being
# viewed by Web clients.
#
<Files ~ "^\.ht">
Order allow,deny
Deny from all
</Files>
#
# DefaultType is the default MIME type the server will use for a document
# if it cannot otherwise determine one, such as from filename extensions.
# If your server contains mostly text or HTML documents, "text/plain" is
# a good value. If most of your content is binary, such as applications
# or images, you may want to use "application/octet-stream" instead to
# keep browsers from trying to display binary files as though they are
# text.
#
DefaultType text/plain
#
# HostnameLookups: Log the names of clients or just their IP addresses
# e.g., www.apache.org (on) or 204.62.129.132 (off).
# The default is off because it'd be overall better for the net if people
# had to knowingly turn this feature on, since enabling it means that
# each client request will result in AT LEAST one lookup request to the
# nameserver.
#
HostnameLookups Off
# ErrorLog: The location of the error log file.
# If you do not specify an ErrorLog directive within a <VirtualHost>
# container, error messages relating to that virtual host will be
# logged here. If you *do* define an error logfile for a <VirtualHost>
# container, that host's errors will be logged there and not here.
#
ErrorLog /var/log/apache2/error.log
#
# LogLevel: Control the number of messages logged to the error_log.
# Possible values include: debug, info, notice, warn, error, crit,
# alert, emerg.
#
LogLevel warn
# Include module configuration:
Include /etc/apache2/mods-enabled/*.load
Include /etc/apache2/mods-enabled/*.conf
# Include all the user configurations:
Include /etc/apache2/httpd.conf
# Include ports listing
Include /etc/apache2/ports.conf
#
# The following directives define some format nicknames for use with
# a CustomLog directive (see below).
# If you are behind a reverse proxy, you might want to change %h into %{X-Forwarded-For}i
#
LogFormat "%v:%p %h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\"" vhost_combined
LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\"" combined
LogFormat "%h %l %u %t \"%r\" %>s %b" common
LogFormat "%{Referer}i -> %U" referer
LogFormat "%{User-agent}i" agent
#
# Define an access log for VirtualHosts that don't define their own logfile
CustomLog /var/log/apache2/other_vhosts_access.log vhost_combined
#
# Customizable error responses come in three flavors:
# 1) plain text 2) local redirects 3) external redirects
#
# Some examples:
#ErrorDocument 500 "The server made a boo boo."
#ErrorDocument 404 /missing.html
#ErrorDocument 404 "/cgi-bin/missing_handler.pl"
#ErrorDocument 402 http://www.example.com/subscription_info.html
#
#
# Putting this all together, we can internationalize error responses.
#
# We use Alias to redirect any /error/HTTP_<error>.html.var response to
# our collection of by-error message multi-language collections. We use
# includes to substitute the appropriate text.
#
# You can modify the messages' appearance without changing any of the
# default HTTP_<error>.html.var files by adding the line:
#
# Alias /error/include/ "/your/include/path/"
#
# which allows you to create your own set of files by starting with the
# /usr/share/apache2/error/include/ files and copying them to /your/include/path/,
# even on a per-VirtualHost basis. The default include files will display
# your Apache version number and your ServerAdmin email address regardless
# of the setting of ServerSignature.
#
# The internationalized error documents require mod_alias, mod_include
# and mod_negotiation. To activate them, uncomment the following 30 lines.
# Alias /error/ "/usr/share/apache2/error/"
#
# <Directory "/usr/share/apache2/error">
# AllowOverride None
# Options IncludesNoExec
# AddOutputFilter Includes html
# AddHandler type-map var
# Order allow,deny
# Allow from all
# LanguagePriority en cs de es fr it nl sv pt-br ro
# ForceLanguagePriority Prefer Fallback
# </Directory>
#
# ErrorDocument 400 /error/HTTP_BAD_REQUEST.html.var
# ErrorDocument 401 /error/HTTP_UNAUTHORIZED.html.var
# ErrorDocument 403 /error/HTTP_FORBIDDEN.html.var
# ErrorDocument 404 /error/HTTP_NOT_FOUND.html.var
# ErrorDocument 405 /error/HTTP_METHOD_NOT_ALLOWED.html.var
# ErrorDocument 408 /error/HTTP_REQUEST_TIME_OUT.html.var
# ErrorDocument 410 /error/HTTP_GONE.html.var
# ErrorDocument 411 /error/HTTP_LENGTH_REQUIRED.html.var
# ErrorDocument 412 /error/HTTP_PRECONDITION_FAILED.html.var
# ErrorDocument 413 /error/HTTP_REQUEST_ENTITY_TOO_LARGE.html.var
# ErrorDocument 414 /error/HTTP_REQUEST_URI_TOO_LARGE.html.var
# ErrorDocument 415 /error/HTTP_UNSUPPORTED_MEDIA_TYPE.html.var
# ErrorDocument 500 /error/HTTP_INTERNAL_SERVER_ERROR.html.var
# ErrorDocument 501 /error/HTTP_NOT_IMPLEMENTED.html.var
# ErrorDocument 502 /error/HTTP_BAD_GATEWAY.html.var
# ErrorDocument 503 /error/HTTP_SERVICE_UNAVAILABLE.html.var
# ErrorDocument 506 /error/HTTP_VARIANT_ALSO_VARIES.html.var
# Include of directories ignores editors' and dpkg's backup files,
# see README.Debian for details.
# Include generic snippets of statements
Include /etc/apache2/conf.d/
# Include the virtual host configurations:
Include /etc/apache2/sites-enabled/
Vhost:
<VirtualHost *:80>
ServerAdmin monemail@mondomaine.fr
ServerName mondomaine.fr
ServerAlias www.mondomaine.fr
DocumentRoot /var/www/mondomaine.fr
<Directory />
Options FollowSymLinks
AllowOverride None
</Directory>
<Directory /var/www/mondomaine.fr>
Options Indexes FollowSymLinks MultiViews
AllowOverride None
Order allow,deny
allow from all
</Directory>
ScriptAlias /cgi-bin/ /usr/lib/cgi-bin/
<Directory "/usr/lib/cgi-bin">
AllowOverride None
Options +ExecCGI -MultiViews +SymLinksIfOwnerMatch
Order allow,deny
Allow from all
</Directory>
ErrorLog /var/log/apache2/error.log
# Possible values include: debug, info, notice, warn, error, crit,
# alert, emerg.
LogLevel warn
CustomLog /var/log/apache2/access.log combined
Alias /doc/ "/usr/share/doc/"
<Directory "/usr/share/doc/">
Options Indexes MultiViews FollowSymLinks
AllowOverride None
Order deny,allow
Deny from all
Allow from 127.0.0.0/255.0.0.0 ::1/128
</Directory>
</VirtualHost>
j'ai bêtement suivi le tuto de la doc sur les virtualhost virtualhosts_avec_apache2
Save water, Drink beer
Hors ligne
#13 Le 05/01/2011, à 14:26
- alex.jdgworld
Re : Auto-hebergement, nom de domaine et freebox
hello
j'ai le meme systeme qui fonctionne chez moi
avec plusieurs site accessible de l'exterieur avec des dyndns.org différents
a la fin du document root je mettrai un '/'
ca donnerai : DocumentRoot /var/www/mondomaine.fr/
j'enleverai cette section ;
<Directory />
Options FollowSymLinks
AllowOverride None
</Directory>
et pour activer le .htaccess
il faut mettre AllowOverride All a la place de None
dans
<Directory /var/www/mondomaine.fr>
Options Indexes FollowSymLinks MultiViews
AllowOverride None
Order allow,deny
allow from all
</Directory>
et donc pour chaque site tu a un fichier de vhost dans /etc/apache2/sites-enabled/
et autrement si c'est pas la conf apache ca ressemble a un probleme de conf dans le soft que tu utilises.
ou l'url n'est pas bien parametrée.
Bien cordialement
ALex
Hors ligne
Pages : 1