Ubuntu-fr

turzin

KDE moins fluide et plus lent a réagir que Gnome sur mon P4

Bonjour,
              j'ai un Pentium 4   2.8GHz avec 1.5 Gig de RAM.  J'ai installé Kubuntu 10.10 que j'aime bien, pour diverses raisons. Sauf que je le trouvais un peu lent au démarrage (1 minute à 1minute 20 après le menu de GRUB),  et la réactivité de Dolphin, Firefox et de mon bureau en général (gélatine des fenêtres, redimensionnement etc) n'est pas extraordinaire.  J'ai donc essayé d'installer Ubuntu 10.10 et là, ce fut un choc total:  35 à 40 secondes pour démarrer, Nautilus qui s'ouvre immédiatement sur le clic de souris, sans moment de latence, idem pour Firefox et un affichage de bureau totalement fluide avec pleins d'effets.  Rien de saccadé comme sur KDE.

Donc, est-ce normal de voir autant de différence avec le matériel que j'ai?  Est-ce que 1 Gig de RAM de plus pourrait aider? Qu'est-ce que je pourrais configurer sous Kubuntu pour augmenter la fluidité d'ensemble?

P.S.:  Je ne veux pas un débat KDE vs Gnome (en fait, je n'ai trouvé que ça sur le web dans mes recherches), mais j'aimerais pouvoir disposé d'un Kubuntu aussi fluide que Ubuntu.

Merci!

---

QuadCore Q6600, 2,4GHz, 8Go RAM, Xubuntu 12.04

jajaX

Re : KDE moins fluide et plus lent a réagir que Gnome sur mon P4

salut

tu as quoi comme carte vidéo ?
as tu testé sans les effets ?

---

@+
jajaX
Asus X93SM-YZ157V / Asus X93SM-YZ065V sous KDE Neon
ASUS K95VB sous Kubuntu 22.04 Jammy Jellyfish (64 bits) / ACER Aspire 5612 WLMI sous Kubuntu 18.04 Bionic Beaver (32 bits)

turzin

Re : KDE moins fluide et plus lent a réagir que Gnome sur mon P4

Ma carte vidéo:  Une GeForce FX 5200  128Mb.

---

QuadCore Q6600, 2,4GHz, 8Go RAM, Xubuntu 12.04

sylvainsjc

Re : KDE moins fluide et plus lent a réagir que Gnome sur mon P4

Salut,

Problème de carte graphique apparemment, qu'avais tu mis comme driver ? As tu toujours Kubuntu installé et comme le demande jajaX : as tu testé sans les effets ?

Dernière modification par sylvainsjc (Le 22/02/2011, à 09:41)

---

ROSA Desktop Fresh KDE 4.13.3
Mon blog sur Linux : http://linuxadvantage.blogspot.com/

turzin

Re : KDE moins fluide et plus lent a réagir que Gnome sur mon P4

Dans NVIDIA X Server Settings, j'ai trouvé ma version de driver:  173.14.28  (Pilote d'accélération graphique NVidia version 173).

J'ai testé sans les effets: les fenêtres bougent bien.  Par contre, aucun changement pour le temps d'attente lors du démarrage de logiciels tels que Firefox, Gedit, et surtout Dolphin (5 ou six petits rebonds au minimum    )  En plus, sans les effets, l'affichage des fenêtres est vraiment instable (par exemple les boutons quit, minimize, etc qui disparaissent).

Pour être plus clair, je recherche 4 choses:  démarrer plus rapidement (comme sur Ubuntu)
                                                                      que Dolphin, Firefox, Gedit (la base)  démarrent aussi vite que sur Ubuntu
                                                                      que ma "gélatine" ne soit pas saccadée (on dirait qu'elle a un grid derrière!)
                                                                      que la rotation en cube soit fluide.

Dernière modification par turzin (Le 23/02/2011, à 02:38)

---

QuadCore Q6600, 2,4GHz, 8Go RAM, Xubuntu 12.04

Ypnose

Re : KDE moins fluide et plus lent a réagir que Gnome sur mon P4

En même temps si tu veux un KDE véloce, go OpenSUSE ou Chakra, pas Kubuntu. Et j'ai quasiment le même matos que toi: CPU Pentium 4 HT 3,2 GHz avec 2Go de RAM. Aucun ralentissement en vue. Seule mon Arch est plus rapide que mon OpenSuse et que ma Chakra.

Dernière modification par Ypnose (Le 23/02/2011, à 13:59)

jajaX

Re : KDE moins fluide et plus lent a réagir que Gnome sur mon P4

Dans NVIDIA X Server Settings, j'ai trouvé ma version de driver:  173.14.28  (Pilote d'accélération graphique NVidia version 173).

tu peux pas essayer de mettre le "nvidia-glx-185" plutôt ?

---

@+
jajaX
Asus X93SM-YZ157V / Asus X93SM-YZ065V sous KDE Neon
ASUS K95VB sous Kubuntu 22.04 Jammy Jellyfish (64 bits) / ACER Aspire 5612 WLMI sous Kubuntu 18.04 Bionic Beaver (32 bits)

turzin

Re : KDE moins fluide et plus lent a réagir que Gnome sur mon P4

OK. J'essaie ce pilote à la maison ce soir et je vous reviens là-dessus.

@Ypnose:  je débute sous  Linux et je croyais que Gnome ou Kde, c'était à peu près équivalent au point de vue "vélocité"....  Donc théoriquement Kubuntu et Ubuntu devraient tourner aussi bien l'un que l'autre sur une même machine...
J'ai aussi un P4 2.3Ghz  sans HT, 512Mo Ram que j'ai monté pour les enfants (en fait, c'est en montant cet ordinateur il y a un mois que j'ai eu la piqûre Linux et que j'ai flushé XP à tout jamais de mon ordinateur) et les effets de bureau (cube, gélatine etc.) sont parfaitement fluide, même si les programmes sont plus long à loader (normal, 512Mo de RAM)   Donc je m,'explique mal la moins grande fluidité de Kubuntu sur une machine plus performante...

Dernière modification par turzin (Le 23/02/2011, à 23:42)

---

QuadCore Q6600, 2,4GHz, 8Go RAM, Xubuntu 12.04

turzin

Re : KDE moins fluide et plus lent a réagir que Gnome sur mon P4

J'ai fait le test avec le pilote 185 et ça a planté.  Erreur d'affichage au démarrage.  Ce n'est pas le bon pilote pour moi!  Sur le site de nVidia, ils recommandent le 173, celui que j'avais.

Si quelqu'un à d'autres bonne idées?  Je commence à penser sérieusement que c'est un problème de puissance d'ordinateur...  J'ai fait un test sur Ubuntu Gnome.  J'ai lancé un tas d'applications sur tous les bureau et j'ai commencé à "lagger" un peu comme sous KDE.  Sur KDE, je lance seulement Amarok et c'est déjà beaucoup moins fluide.

---

QuadCore Q6600, 2,4GHz, 8Go RAM, Xubuntu 12.04

Ypnose

Re : KDE moins fluide et plus lent a réagir que Gnome sur mon P4

Chaque chose en son temps, d'abord effectue cette commande afin d'identifier ton GPU:

lspci | grep VGA

@Ypnose:  je débute sous  Linux et je croyais que Gnome ou Kde, c'était à peu près équivalent au point de vue "vélocité"

Non. Tu liras ici ou là que GNOME consomme moins que KDE et que GNOME est donc plus adapté sur les ordis moins véloce. Ce n'est pas vrai, comme je l'ai déjà dit sur ma OpenSuse ou ma Chakra (sur KDE donc), je consomme moins de RAM et mon CPU est moins utilisée que sur Ubuntu ou Fedora (GNOME).

Quand a KDE moins "performant" sur ton ordi, pourquoi ne pas réduire quelques effets de bureau?

Dernière modification par Ypnose (Le 24/02/2011, à 04:02)

turzin

Re : KDE moins fluide et plus lent a réagir que Gnome sur mon P4

Voilà pour la commande lspci

01:00.0 VGA compatible controller: nVidia Corporation NV34 [GeForce FX 5200] (rev a1)

Dans le fond mon interrogation porte sur Ubuntu vs Kubuntu (et non pas Gnome vs KDE, je me suis mal exprimé ).  Je croyais que les deux étaient également adaptés aux ordis moins véloces comme le mien.  Si ce n'est pas le cas, si c'est normal que tous les logiciels soient un peu plus lent à démarrer et les effets de bureau plus saccadés sur Kubuntu avec mon ordinateur, je verrai.
Le but de ma discussion est un peu de vérifier tout ça... avec l'espoir que quelqu'un trouve le petit quelque chose à quelque part qui "ralenti" Kubuntu sur mon PC ...

Dernière modification par turzin (Le 24/02/2011, à 05:34)

---

QuadCore Q6600, 2,4GHz, 8Go RAM, Xubuntu 12.04

ginette

Re : KDE moins fluide et plus lent a réagir que Gnome sur mon P4

e le trouvais un peu lent au démarrage

Tu devrais , je pense, consulter le log (dmesg) de démarrage. Peut être as tu un périphérique qui mets du temps à s'iniltialiser et être reconnu par ton système. Dans ce cas, il y a des appels système répétés jusqu'à ce que..
C'est le cas chez moi pour ce qui concerne des disques SATA.....et du coup, le démarrage est plombé d'au moins 20 à 30 sec supplémentaires

turzin

Re : KDE moins fluide et plus lent a réagir que Gnome sur mon P4

Pour le log de démarrage, est-ce que vous pouvez me dire où le trouver?

En cherchant, j'ai trouvé ces infos sur mon système.  Je sais pas si ça peut aiguiller quelqu'un...

1-Dans KSystemLog, pour X.org, il y a ce message qui semble récurrent:
    Information    [ 81950.958] Warning: Xalloc: requesting unpleasantly large amount of memory: 0 bytes.
2-Dans KinfoCenter, dans les infos sur la mémoire, je vois que seulement  200Mo de mon 1.5Go est libre 13% (avec aucun programme ouvert sauf Firefox et le Kinfocenter)
3- Par contre dans Surveillance du système, c'est environ 650 Mo sur 1.5 Go qui semble utilisé (donc pas mal plus que 200Mo de libre.. ça semble contradictoire).  De plus, dans  l'historique du processeur, ça se tient à environ 20% et dès que j'ouvre une fenêtre ou brasse un peu une fenêtre, ça monte à 80%-100%.

---

QuadCore Q6600, 2,4GHz, 8Go RAM, Xubuntu 12.04

sylvainsjc

Re : KDE moins fluide et plus lent a réagir que Gnome sur mon P4

Pour le log de démarrage :
Après avoir démarré, dans le terminal, tu tapes la commandes suivante :

dmesg

Puis tu nous copie ici le résultat

---

ROSA Desktop Fresh KDE 4.13.3
Mon blog sur Linux : http://linuxadvantage.blogspot.com/

turzin

Re : KDE moins fluide et plus lent a réagir que Gnome sur mon P4

Ouais, j'ai pas encore le réflexe ligne de commande.  Alors voici le résultat:

[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Linux version 2.6.35-25-generic (buildd@palmer) (gcc version 4.4.5 (Ubuntu/Linaro 4.4.4-14ubuntu5) ) #44-Ubuntu SMP Fri Jan 21 17:40:48 UTC 2011 (Ubuntu 2.6.35-25.44-generic 2.6.35.10)
[    0.000000] BIOS-provided physical RAM map:
[    0.000000]  BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[    0.000000]  BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[    0.000000]  BIOS-e820: 00000000000e6000 - 0000000000100000 (reserved)
[    0.000000]  BIOS-e820: 0000000000100000 - 000000005fe30000 (usable)
[    0.000000]  BIOS-e820: 000000005fe30000 - 000000005fe3e05e (ACPI NVS)
[    0.000000]  BIOS-e820: 000000005fe3e05e - 000000005ff30000 (usable)
[    0.000000]  BIOS-e820: 000000005ff30000 - 000000005ff40000 (ACPI data)
[    0.000000]  BIOS-e820: 000000005ff40000 - 000000005fff0000 (ACPI NVS)
[    0.000000]  BIOS-e820: 000000005fff0000 - 0000000060000000 (reserved)
[    0.000000]  BIOS-e820: 00000000fecf0000 - 00000000fecf1000 (reserved)
[    0.000000]  BIOS-e820: 00000000fed20000 - 00000000feda0000 (reserved)
[    0.000000] NX (Execute Disable) protection: approximated by x86 segment limits
[    0.000000] DMI 2.3 present.
[    0.000000] e820 update range: 0000000000000000 - 0000000000001000 (usable) ==> (reserved)
[    0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[    0.000000] last_pfn = 0x5ff30 max_arch_pfn = 0x100000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-EFFFF uncachable
[    0.000000]   F0000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 000000000 mask FC0000000 write-back
[    0.000000]   1 base 040000000 mask FE0000000 write-back
[    0.000000]   2 disabled
[    0.000000]   3 disabled
[    0.000000]   4 disabled
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[    0.000000] e820 update range: 0000000000002000 - 0000000000010000 (usable) ==> (reserved)
[    0.000000] Scanning 1 areas for low memory corruption
[    0.000000] modified physical RAM map:
[    0.000000]  modified: 0000000000000000 - 0000000000001000 (reserved)
[    0.000000]  modified: 0000000000001000 - 0000000000002000 (usable)
[    0.000000]  modified: 0000000000002000 - 0000000000010000 (reserved)
[    0.000000]  modified: 0000000000010000 - 000000000009fc00 (usable)
[    0.000000]  modified: 000000000009fc00 - 00000000000a0000 (reserved)
[    0.000000]  modified: 00000000000e6000 - 0000000000100000 (reserved)
[    0.000000]  modified: 0000000000100000 - 000000005fe30000 (usable)
[    0.000000]  modified: 000000005fe30000 - 000000005fe3e05e (ACPI NVS)
[    0.000000]  modified: 000000005fe3e05e - 000000005ff30000 (usable)
[    0.000000]  modified: 000000005ff30000 - 000000005ff40000 (ACPI data)
[    0.000000]  modified: 000000005ff40000 - 000000005fff0000 (ACPI NVS)
[    0.000000]  modified: 000000005fff0000 - 0000000060000000 (reserved)
[    0.000000]  modified: 00000000fecf0000 - 00000000fecf1000 (reserved)
[    0.000000]  modified: 00000000fed20000 - 00000000feda0000 (reserved)
[    0.000000] initial memory mapped : 0 - 00c00000
[    0.000000] found SMP MP-table at [c00ff780] ff780
[    0.000000] init_memory_mapping: 0000000000000000-00000000377fe000
[    0.000000]  0000000000 - 0000400000 page 4k
[    0.000000]  0000400000 - 0037400000 page 2M
[    0.000000]  0037400000 - 00377fe000 page 4k
[    0.000000] kernel direct mapping tables up to 377fe000 @ 15000-1a000
[    0.000000] RAMDISK: 375ad000 - 37ff0000
[    0.000000] Allocated new RAMDISK: 009a7000 - 013e95b4
[    0.000000] Move RAMDISK from 00000000375ad000 - 0000000037fef5b3 to 009a7000 - 013e95b3
[    0.000000] ACPI: RSDP 000f62f0 00014 (v00 ACPIAM)
[    0.000000] ACPI: RSDT 5ff30000 00034 (v01 INTEL  PRODUCT8 20040203 MSFT 00000097)
[    0.000000] ACPI: FACP 5ff30200 00081 (v02 INTEL  PRODUCT8 20040203 MSFT 00000097)
[    0.000000] ACPI: DSDT 5ff30370 04170 (v01 INTEL  PRODUCT8 00000006 MSFT 0100000D)
[    0.000000] ACPI: FACS 5ff40000 00040
[    0.000000] ACPI: APIC 5ff30300 00068 (v01 INTEL  PRODUCT8 20040203 MSFT 00000097)
[    0.000000] ACPI: ASF! 5ff344e0 00099 (v16 LEGEND I865PASF 00000001 MSFT 0100000D)
[    0.000000] ACPI: WDDT 5ff34579 00040 (v01 INTEL  OEMWDDT  00000001 MSFT 0100000D)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] 647MB HIGHMEM available.
[    0.000000] 887MB LOWMEM available.
[    0.000000]   mapped low ram: 0 - 377fe000
[    0.000000]   low ram: 0 - 377fe000
[    0.000000] Zone PFN ranges:
[    0.000000]   DMA      0x00000001 -> 0x00001000
[    0.000000]   Normal   0x00001000 -> 0x000377fe
[    0.000000]   HighMem  0x000377fe -> 0x0005ff30
[    0.000000] Movable zone start PFN for each node
[    0.000000] early_node_map[4] active PFN ranges
[    0.000000]     0: 0x00000001 -> 0x00000002
[    0.000000]     0: 0x00000010 -> 0x0000009f
[    0.000000]     0: 0x00000100 -> 0x0005fe30
[    0.000000]     0: 0x0005fe3f -> 0x0005ff30
[    0.000000] On node 0 totalpages: 392881
[    0.000000] free_area_init_node: node 0, pgdat c07fffc0, node_mem_map c13eb020
[    0.000000]   DMA zone: 32 pages used for memmap
[    0.000000]   DMA zone: 0 pages reserved
[    0.000000]   DMA zone: 3952 pages, LIFO batch:0
[    0.000000]   Normal zone: 1744 pages used for memmap
[    0.000000]   Normal zone: 221486 pages, LIFO batch:31
[    0.000000]   HighMem zone: 1295 pages used for memmap
[    0.000000]   HighMem zone: 164372 pages, LIFO batch:31
[    0.000000] Using APIC driver default
[    0.000000] ACPI: PM-Timer IO Port: 0x408
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1])
[    0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
[    0.000000] nr_irqs_gsi: 40
[    0.000000] early_res array is doubled to 64 at [16000 - 167ff]
[    0.000000] PM: Registered nosave memory: 0000000000002000 - 0000000000010000
[    0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[    0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e6000
[    0.000000] PM: Registered nosave memory: 00000000000e6000 - 0000000000100000
[    0.000000] Allocating PCI resources starting at 60000000 (gap: 60000000:9ecf0000)
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2 nr_node_ids:1
[    0.000000] PERCPU: Embedded 14 pages/cpu @c2000000 s36416 r0 d20928 u2097152
[    0.000000] pcpu-alloc: s36416 r0 d20928 u2097152 alloc=1*4194304
[    0.000000] pcpu-alloc: [0] 0 1
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 389810
[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.35-25-generic root=UUID=8ddba049-785c-4a96-893c-0ab1baf5af25 ro quiet splash
[    0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] Enabling fast FPU save and restore... done.
[    0.000000] Enabling unmasked SIMD FPU exception support... done.
[    0.000000] Initializing CPU#0
[    0.000000] allocated 7860140 bytes of page_cgroup
[    0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[    0.000000] Subtract (50 early reservations)
[    0.000000]   #1 [0000001000 - 0000002000]   EX TRAMPOLINE
[    0.000000]   #2 [0000100000 - 00009a2adc]   TEXT DATA BSS
[    0.000000]   #3 [00009a3000 - 00009a6198]             BRK
[    0.000000]   #4 [00000ff790 - 0000100000]   BIOS reserved
[    0.000000]   #5 [00000ff780 - 00000ff790]    MP-table mpf
[    0.000000]   #6 [000009fc00 - 00000fc6a0]   BIOS reserved
[    0.000000]   #7 [00000fc7e0 - 00000ff780]   BIOS reserved
[    0.000000]   #8 [00000fc6a0 - 00000fc7e0]    MP-table mpc
[    0.000000]   #9 [0000010000 - 0000011000]      TRAMPOLINE
[    0.000000]   #10 [0000011000 - 0000015000]     ACPI WAKEUP
[    0.000000]   #11 [0000015000 - 0000016000]         PGTABLE
[    0.000000]   #12 [00009a7000 - 00013ea000]     NEW RAMDISK
[    0.000000]   #13 [00013ea000 - 00013eb000]         BOOTMEM
[    0.000000]   #14 [00013eb000 - 0001feb000]         BOOTMEM
[    0.000000]   #15 [0001feb000 - 0001feb004]         BOOTMEM
[    0.000000]   #16 [0001feb040 - 0001feb100]         BOOTMEM
[    0.000000]   #17 [0001feb100 - 0001feb154]         BOOTMEM
[    0.000000]   #18 [0001feb180 - 0001fee180]         BOOTMEM
[    0.000000]   #19 [0001fee180 - 0001fee1c0]         BOOTMEM
[    0.000000]   #20 [0001fee1c0 - 0001ff11c0]         BOOTMEM
[    0.000000]   #21 [0001ff11c0 - 0001ff11e7]         BOOTMEM
[    0.000000]   #22 [0001ff1200 - 0001ff1388]         BOOTMEM
[    0.000000]   #23 [0001ff13c0 - 0001ff1400]         BOOTMEM
[    0.000000]   #24 [0001ff1400 - 0001ff1440]         BOOTMEM
[    0.000000]   #25 [0001ff1440 - 0001ff1480]         BOOTMEM
[    0.000000]   #26 [0001ff1480 - 0001ff14c0]         BOOTMEM
[    0.000000]   #27 [0001ff14c0 - 0001ff1500]         BOOTMEM
[    0.000000]   #28 [0001ff1500 - 0001ff1540]         BOOTMEM
[    0.000000]   #29 [0001ff1540 - 0001ff1580]         BOOTMEM
[    0.000000]   #30 [0001ff1580 - 0001ff15c0]         BOOTMEM
[    0.000000]   #31 [0001ff15c0 - 0001ff1600]         BOOTMEM
[    0.000000]   #32 [0001ff1600 - 0001ff1640]         BOOTMEM
[    0.000000]   #33 [0001ff1640 - 0001ff1680]         BOOTMEM
[    0.000000]   #34 [0001ff1680 - 0001ff1690]         BOOTMEM
[    0.000000]   #35 [0001ff16c0 - 0001ff16d0]         BOOTMEM
[    0.000000]   #36 [0001ff1700 - 0001ff176a]         BOOTMEM
[    0.000000]   #37 [0001ff1780 - 0001ff17ea]         BOOTMEM
[    0.000000]   #38 [0002000000 - 000200e000]         BOOTMEM
[    0.000000]   #39 [0002200000 - 000220e000]         BOOTMEM
[    0.000000]   #40 [0001ff3800 - 0001ff3804]         BOOTMEM
[    0.000000]   #41 [0001ff3840 - 0001ff3844]         BOOTMEM
[    0.000000]   #42 [0001ff3880 - 0001ff3888]         BOOTMEM
[    0.000000]   #43 [0001ff38c0 - 0001ff38c8]         BOOTMEM
[    0.000000]   #44 [0001ff3900 - 0001ff39a8]         BOOTMEM
[    0.000000]   #45 [0001ff39c0 - 0001ff3a28]         BOOTMEM
[    0.000000]   #46 [0001ff3a40 - 0001ff7a40]         BOOTMEM
[    0.000000]   #47 [000200e000 - 000208e000]         BOOTMEM
[    0.000000]   #48 [000208e000 - 00020ce000]         BOOTMEM
[    0.000000]   #49 [000220e000 - 000298cfac]         BOOTMEM
[    0.000000] Initializing HighMem for node 0 (000377fe:0005ff30)
[    0.000000] Memory: 1531232k/1572032k available (4933k kernel code, 40292k reserved, 2331k data, 688k init, 662668k highmem)
[    0.000000] virtual kernel memory layout:
[    0.000000]     fixmap  : 0xfff16000 - 0xfffff000   ( 932 kB)
[    0.000000]     pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
[    0.000000]     vmalloc : 0xf7ffe000 - 0xff7fe000   ( 120 MB)
[    0.000000]     lowmem  : 0xc0000000 - 0xf77fe000   ( 887 MB)
[    0.000000]       .init : 0xc0819000 - 0xc08c5000   ( 688 kB)
[    0.000000]       .data : 0xc05d17ce - 0xc08187a8   (2331 kB)
[    0.000000]       .text : 0xc0100000 - 0xc05d17ce   (4933 kB)
[    0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[    0.000000] SLUB: Genslabs=13, HWalign=128, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[    0.000000] Hierarchical RCU implementation.
[    0.000000]  RCU dyntick-idle grace-period acceleration is enabled.
[    0.000000]  RCU-based detection of stalled CPUs is disabled.
[    0.000000]  Verbose stalled-CPUs detection is disabled.
[    0.000000] NR_IRQS:2304 nr_irqs:512
[    0.000000] Console: colour VGA+ 80x25
[    0.000000] console [tty0] enabled
[    0.000000] Fast TSC calibration using PIT
[    0.000000] Detected 2793.060 MHz processor.
[    0.004009] Calibrating delay loop (skipped), value calculated using timer frequency.. 5586.12 BogoMIPS (lpj=11172240)
[    0.004016] pid_max: default: 32768 minimum: 301
[    0.004043] Security Framework initialized
[    0.004075] AppArmor: AppArmor initialized
[    0.004079] Yama: becoming mindful.
[    0.004162] Mount-cache hash table entries: 512
[    0.004376] Initializing cgroup subsys ns
[    0.004383] Initializing cgroup subsys cpuacct
[    0.004390] Initializing cgroup subsys memory
[    0.004403] Initializing cgroup subsys devices
[    0.004407] Initializing cgroup subsys freezer
[    0.004410] Initializing cgroup subsys net_cls
[    0.004453] CPU: Physical Processor ID: 0
[    0.004456] CPU: Processor Core ID: 0
[    0.004460] mce: CPU supports 4 MCE banks
[    0.004473] CPU0: Thermal monitoring enabled (TM1)
[    0.004489] Performance Events: Netburst events, Netburst P4/Xeon PMU driver.
[    0.004503] ... version:                0
[    0.004506] ... bit width:              40
[    0.004508] ... generic registers:      18
[    0.004511] ... value mask:             000000ffffffffff
[    0.004514] ... max period:             0000007fffffffff
[    0.004517] ... fixed-purpose events:   0
[    0.004520] ... event mask:             000000000003ffff
[    0.008717] ACPI: Core revision 20100428
[    0.015826] ftrace: converting mcount calls to 0f 1f 44 00 00
[    0.015833] ftrace: allocating 21756 entries in 43 pages
[    0.020110] Enabling APIC mode:  Flat.  Using 1 I/O APICs
[    0.020416] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.061692] CPU0: Intel(R) Pentium(R) 4 CPU 2.80GHz stepping 09
[    0.064000] Booting Node   0, Processors  #1 Ok.
[    0.008000] Initializing CPU#1
[    0.152028] Brought up 2 CPUs
[    0.152034] Total of 2 processors activated (11172.57 BogoMIPS).
[    0.152358] devtmpfs: initialized
[    0.153463] regulator: core version 0.5
[    0.153492] Time: 12:36:11  Date: 02/25/11
[    0.153561] NET: Registered protocol family 16
[    0.153622] Trying to unpack rootfs image as initramfs...
[    0.153863] EISA bus registered
[    0.153882] ACPI: bus type pci registered
[    0.156448] PCI: PCI BIOS revision 2.10 entry at 0xf0031, last bus=2
[    0.156454] PCI: Using configuration type 1 for base access
[    0.158831] bio: create slab <bio-0> at 0
[    0.161742] ACPI: EC: Look up EC in DSDT
[    0.164904] ACPI: Executed 3 blocks of module-level executable AML code
[    0.173723] ACPI: Interpreter enabled
[    0.173736] ACPI: (supports S0 S1 S4 S5)
[    0.173783] ACPI: Using IOAPIC for interrupt routing
[    0.187903] ACPI: Power Resource [URP1] (off)
[    0.187964] ACPI: Power Resource [FDDP] (off)
[    0.188043] ACPI: Power Resource [LPTP] (off)
[    0.188425] ACPI: No dock devices found.
[    0.188436] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
[    0.188655] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.189086] pci_root PNP0A03:00: host bridge window [io  0x0000-0x0cf7] (ignored)
[    0.189093] pci_root PNP0A03:00: host bridge window [io  0x0d00-0xffff] (ignored)
[    0.189098] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
[    0.189105] pci_root PNP0A03:00: host bridge window [mem 0x60000000-0xffffffff] (ignored)
[    0.189132] pci 0000:00:00.0: Enabling MCH 'Overflow' Device
[    0.189146] pci 0000:00:00.0: reg 10: [mem 0xf0000000-0xf7ffffff pref]
[    0.189267] pci 0000:00:06.0: reg 10: [mem 0xfecf0000-0xfecf0fff]
[    0.189383] pci 0000:00:1d.0: reg 20: [io  0xcc00-0xcc1f]
[    0.189452] pci 0000:00:1d.1: reg 20: [io  0xd000-0xd01f]
[    0.189529] pci 0000:00:1d.2: reg 20: [io  0xd400-0xd41f]
[    0.189599] pci 0000:00:1d.3: reg 20: [io  0xd800-0xd81f]
[    0.189667] pci 0000:00:1d.7: reg 10: [mem 0xfebffc00-0xfebfffff]
[    0.189739] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[    0.189748] pci 0000:00:1d.7: PME# disabled
[    0.189857] pci 0000:00:1f.0: Force enabled HPET at 0xfed00000
[    0.189868] pci 0000:00:1f.0: quirk: [io  0x0400-0x047f] claimed by ICH4 ACPI/GPIO/TCO
[    0.189876] pci 0000:00:1f.0: quirk: [io  0x0500-0x053f] claimed by ICH4 GPIO
[    0.189913] pci 0000:00:1f.1: reg 10: [io  0x0000-0x0007]
[    0.189926] pci 0000:00:1f.1: reg 14: [io  0x0000-0x0003]
[    0.189939] pci 0000:00:1f.1: reg 18: [io  0x0000-0x0007]
[    0.189950] pci 0000:00:1f.1: reg 1c: [io  0x0000-0x0003]
[    0.189960] pci 0000:00:1f.1: reg 20: [io  0xffa0-0xffaf]
[    0.189971] pci 0000:00:1f.1: reg 24: [mem 0x00000000-0x000003ff]
[    0.190012] pci 0000:00:1f.2: reg 10: [io  0xec00-0xec07]
[    0.190022] pci 0000:00:1f.2: reg 14: [io  0xe800-0xe803]
[    0.190032] pci 0000:00:1f.2: reg 18: [io  0xe400-0xe407]
[    0.190042] pci 0000:00:1f.2: reg 1c: [io  0xe000-0xe003]
[    0.190052] pci 0000:00:1f.2: reg 20: [io  0xdc00-0xdc0f]
[    0.190119] pci 0000:00:1f.3: reg 20: [io  0xc800-0xc81f]
[    0.190184] pci 0000:00:1f.5: reg 18: [mem 0xfebff800-0xfebff9ff]
[    0.190195] pci 0000:00:1f.5: reg 1c: [mem 0xfebff400-0xfebff4ff]
[    0.190235] pci 0000:00:1f.5: PME# supported from D0 D3hot D3cold
[    0.190242] pci 0000:00:1f.5: PME# disabled
[    0.190301] pci 0000:01:00.0: reg 10: [mem 0xfd000000-0xfdffffff]
[    0.190311] pci 0000:01:00.0: reg 14: [mem 0xe0000000-0xe7ffffff pref]
[    0.190337] pci 0000:01:00.0: reg 30: [mem 0xfe9e0000-0xfe9fffff pref]
[    0.190419] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[    0.190429] pci 0000:00:01.0:   bridge window [io  0xf000-0x0000] (disabled)
[    0.190437] pci 0000:00:01.0:   bridge window [mem 0xfc900000-0xfe9fffff]
[    0.190444] pci 0000:00:01.0:   bridge window [mem 0xdc800000-0xec7fffff pref]
[    0.190493] pci 0000:02:02.0: reg 10: [mem 0xfeaf0000-0xfeafffff]
[    0.190504] pci 0000:02:02.0: reg 14: [io  0xbc00-0xbc07]
[    0.190552] pci 0000:02:02.0: PME# supported from D0 D3hot D3cold
[    0.190559] pci 0000:02:02.0: PME# disabled
[    0.190604] pci 0000:02:08.0: reg 10: [mem 0xfeaef000-0xfeaeffff]
[    0.190615] pci 0000:02:08.0: reg 14: [io  0xb800-0xb83f]
[    0.190663] pci 0000:02:08.0: supports D1 D2
[    0.190668] pci 0000:02:08.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.190675] pci 0000:02:08.0: PME# disabled
[    0.190719] pci 0000:00:1e.0: PCI bridge to [bus 02-02] (subtractive decode)
[    0.190727] pci 0000:00:1e.0:   bridge window [io  0xb000-0xbfff]
[    0.190736] pci 0000:00:1e.0:   bridge window [mem 0xfea00000-0xfeafffff]
[    0.190744] pci 0000:00:1e.0:   bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[    0.190750] pci 0000:00:1e.0:   bridge window [io  0x0000-0xffff] (subtractive decode)
[    0.190756] pci 0000:00:1e.0:   bridge window [mem 0x00000000-0xffffffff] (subtractive decode)
[    0.190775] pci_bus 0000:00: on NUMA node 0
[    0.190788] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[    0.190958] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
[    0.191055] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P3._PRT]
[    0.197286] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
[    0.197549] ACPI: PCI Interrupt Link [LNKB] (IRQs *3 4 5 6 7 9 10 11 12 14 15)
[    0.197800] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
[    0.198044] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
[    0.198299] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
[    0.198540] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
[    0.198796] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
[    0.199041] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
[    0.199180] HEST: Table is not found!
[    0.199402] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[    0.199413] vgaarb: loaded
[    0.199763] SCSI subsystem initialized
[    0.200019] libata version 3.00 loaded.
[    0.200117] usbcore: registered new interface driver usbfs
[    0.200145] usbcore: registered new interface driver hub
[    0.200206] usbcore: registered new device driver usb
[    0.200544] ACPI: WMI: Mapper loaded
[    0.200549] PCI: Using ACPI for IRQ routing
[    0.200558] PCI: pci_cache_line_size set to 64 bytes
[    0.200687] reserve RAM buffer: 0000000000002000 - 000000000000ffff
[    0.200693] reserve RAM buffer: 000000000009fc00 - 000000000009ffff
[    0.200699] reserve RAM buffer: 000000005fe30000 - 000000005fffffff
[    0.200705] reserve RAM buffer: 000000005ff30000 - 000000005fffffff
[    0.200934] NetLabel: Initializing
[    0.200939] NetLabel:  domain hash size = 128
[    0.200942] NetLabel:  protocols = UNLABELED CIPSOv4
[    0.200967] NetLabel:  unlabeled traffic allowed by default
[    0.201151] hpet clockevent registered
[    0.201157] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[    0.201166] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[    0.201178] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[    0.208079] Switching to clocksource tsc
[    0.232349] AppArmor: AppArmor Filesystem Enabled
[    0.232380] pnp: PnP ACPI init
[    0.232420] ACPI: bus type pnp registered
[    0.239003] pnp: PnP ACPI: found 13 devices
[    0.239009] ACPI: ACPI bus type pnp unregistered
[    0.239018] PnPBIOS: Disabled by ACPI PNP
[    0.239050] system 00:09: [io  0x04d0-0x04d1] has been reserved
[    0.239066] system 00:0b: [io  0x0400-0x047f] has been reserved
[    0.239074] system 00:0b: [io  0x0680-0x06ff] has been reserved
[    0.239081] system 00:0b: [io  0x0500-0x053f] has been reserved
[    0.239090] system 00:0b: [mem 0xfec00000-0xfec00fff] could not be reserved
[    0.239098] system 00:0b: [mem 0xfee00000-0xfee00fff] has been reserved
[    0.239106] system 00:0b: [mem 0xfed20000-0xfed9ffff] has been reserved
[    0.239121] system 00:0c: [mem 0x00000000-0x0009ffff] could not be reserved
[    0.239130] system 00:0c: [mem 0x000c0000-0x000dffff] could not be reserved
[    0.239138] system 00:0c: [mem 0x000e0000-0x000fffff] could not be reserved
[    0.239146] system 00:0c: [mem 0x00100000-0x5fffffff] could not be reserved
[    0.277316] pci 0000:00:1f.1: BAR 5: assigned [mem 0x60000000-0x600003ff]
[    0.277329] pci 0000:00:1f.1: BAR 5: set to [mem 0x60000000-0x600003ff] (PCI address [0x60000000-0x600003ff]
[    0.277337] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[    0.277341] pci 0000:00:01.0:   bridge window [io  disabled]
[    0.277350] pci 0000:00:01.0:   bridge window [mem 0xfc900000-0xfe9fffff]
[    0.277358] pci 0000:00:01.0:   bridge window [mem 0xdc800000-0xec7fffff pref]
[    0.277370] pci 0000:00:1e.0: PCI bridge to [bus 02-02]
[    0.277376] pci 0000:00:1e.0:   bridge window [io  0xb000-0xbfff]
[    0.277385] pci 0000:00:1e.0:   bridge window [mem 0xfea00000-0xfeafffff]
[    0.277393] pci 0000:00:1e.0:   bridge window [mem pref disabled]
[    0.277422] pci 0000:00:1e.0: setting latency timer to 64
[    0.277430] pci_bus 0000:00: resource 0 [io  0x0000-0xffff]
[    0.277436] pci_bus 0000:00: resource 1 [mem 0x00000000-0xffffffff]
[    0.277442] pci_bus 0000:01: resource 1 [mem 0xfc900000-0xfe9fffff]
[    0.277448] pci_bus 0000:01: resource 2 [mem 0xdc800000-0xec7fffff pref]
[    0.277453] pci_bus 0000:02: resource 0 [io  0xb000-0xbfff]
[    0.277459] pci_bus 0000:02: resource 1 [mem 0xfea00000-0xfeafffff]
[    0.277465] pci_bus 0000:02: resource 4 [io  0x0000-0xffff]
[    0.277470] pci_bus 0000:02: resource 5 [mem 0x00000000-0xffffffff]
[    0.277555] NET: Registered protocol family 2
[    0.277716] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.278368] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.279752] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[    0.280535] TCP: Hash tables configured (established 131072 bind 65536)
[    0.280543] TCP reno registered
[    0.280555] UDP hash table entries: 512 (order: 2, 16384 bytes)
[    0.280578] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[    0.280801] NET: Registered protocol family 1
[    0.281028] pci 0000:01:00.0: Boot video device
[    0.281057] pci 0000:02:08.0: Firmware left e100 interrupts enabled; disabling
[    0.281072] PCI: CLS 64 bytes, default 64
[    0.281330] cpufreq-nforce2: No nForce2 chipset.
[    0.281392] Scanning for low memory corruption every 60 seconds
[    0.281701] audit: initializing netlink socket (disabled)
[    0.281725] type=2000 audit(1298637370.276:1): initialized
[    0.294293] highmem bounce pool size: 64 pages
[    0.294305] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[    0.297691] VFS: Disk quotas dquot_6.5.2
[    0.297839] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    0.299298] fuse init (API version 7.14)
[    0.299511] msgmni has been set to 1696
[    0.300259] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[    0.300266] io scheduler noop registered
[    0.300271] io scheduler deadline registered
[    0.300301] io scheduler cfq registered (default)
[    0.300616] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    0.300668] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    0.301081] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input0
[    0.301101] ACPI: Sleep Button [SLPB]
[    0.301219] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[    0.301228] ACPI: Power Button [PWRF]
[    0.301527] ACPI: acpi_idle registered with cpuidle
[    0.305688] ERST: Table is not found!
[    0.306097] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    0.306227] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[    0.306836] 00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[    0.309708] brd: module loaded
[    0.311006] loop: module loaded
[    0.311505] ata_piix 0000:00:1f.1: version 2.13
[    0.311527] ata_piix 0000:00:1f.1: enabling device (0005 -> 0007)
[    0.311543]   alloc irq_desc for 18 on node -1
[    0.311547]   alloc kstat_irqs on node -1
[    0.311561] ata_piix 0000:00:1f.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[    0.311641] ata_piix 0000:00:1f.1: setting latency timer to 64
[    0.311804] scsi0 : ata_piix
[    0.312011] scsi1 : ata_piix
[    0.312110] isapnp: Scanning for PnP cards...
[    0.314987] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14
[    0.314993] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15
[    0.315066] ata_piix 0000:00:1f.2: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[    0.315075] ata_piix 0000:00:1f.2: MAP [ P0 -- P1 -- ]
[    0.315141] ata_piix 0000:00:1f.2: setting latency timer to 64
[    0.315514] scsi2 : ata_piix
[    0.315632] scsi3 : ata_piix
[    0.317504] ata3: SATA max UDMA/133 cmd 0xec00 ctl 0xe800 bmdma 0xdc00 irq 18
[    0.317509] ata4: SATA max UDMA/133 cmd 0xe400 ctl 0xe000 bmdma 0xdc08 irq 18
[    0.318181] Fixed MDIO Bus: probed
[    0.318247] PPP generic driver version 2.4.2
[    0.318357] tun: Universal TUN/TAP device driver, 1.6
[    0.318361] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[    0.318544] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.318584]   alloc irq_desc for 23 on node -1
[    0.318588]   alloc kstat_irqs on node -1
[    0.318601] ehci_hcd 0000:00:1d.7: PCI INT D -> GSI 23 (level, low) -> IRQ 23
[    0.318628] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[    0.318634] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[    0.318702] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
[    0.318745] ehci_hcd 0000:00:1d.7: debug port 1
[    0.322628] ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported
[    0.322717] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfebffc00
[    0.336184] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[    0.336476] hub 1-0:1.0: USB hub found
[    0.336486] hub 1-0:1.0: 8 ports detected
[    0.336643] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    0.336675] uhci_hcd: USB Universal Host Controller Interface driver
[    0.336745]   alloc irq_desc for 16 on node -1
[    0.336749]   alloc kstat_irqs on node -1
[    0.336760] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    0.336774] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[    0.336780] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[    0.336864] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[    0.336910] uhci_hcd 0000:00:1d.0: irq 16, io base 0x0000cc00
[    0.337138] hub 2-0:1.0: USB hub found
[    0.337146] hub 2-0:1.0: 2 ports detected
[    0.337274]   alloc irq_desc for 19 on node -1
[    0.337277]   alloc kstat_irqs on node -1
[    0.337285] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[    0.337295] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[    0.337300] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[    0.337365] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[    0.337404] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000d000
[    0.337626] hub 3-0:1.0: USB hub found
[    0.337634] hub 3-0:1.0: 2 ports detected
[    0.337740] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[    0.337749] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[    0.337754] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[    0.337828] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[    0.337855] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000d400
[    0.338068] hub 4-0:1.0: USB hub found
[    0.338076] hub 4-0:1.0: 2 ports detected
[    0.338181] uhci_hcd 0000:00:1d.3: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    0.338191] uhci_hcd 0000:00:1d.3: setting latency timer to 64
[    0.338196] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[    0.338263] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
[    0.338290] uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000d800
[    0.338517] hub 5-0:1.0: USB hub found
[    0.338525] hub 5-0:1.0: 2 ports detected
[    0.338739] PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[    0.338743] PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[    0.339519] serio: i8042 KBD port at 0x60,0x64 irq 1
[    0.339704] mice: PS/2 mouse device common for all mice
[    0.339934] rtc_cmos 00:02: RTC can wake from S4
[    0.340013] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[    0.340043] rtc0: alarms up to one month, 114 bytes nvram, hpet irqs
[    0.340253] device-mapper: uevent: version 1.0.3
[    0.360382] device-mapper: ioctl: 4.17.0-ioctl (2010-03-05) initialised: dm-devel@redhat.com
[    0.376103] device-mapper: multipath: version 1.1.1 loaded
[    0.376110] device-mapper: multipath round-robin: version 1.0.0 loaded
[    0.384148] EISA: Probing bus 0 at eisa.0
[    0.384196] EISA: Detected 0 cards.
[    0.399976] cpuidle: using governor ladder
[    0.399981] cpuidle: using governor menu
[    0.400712] TCP cubic registered
[    0.400989] NET: Registered protocol family 10
[    0.401769] lo: Disabled Privacy Extensions
[    0.402303] NET: Registered protocol family 17
[    0.402399] Using IPI No-Shortcut mode
[    0.402586] PM: Resume from disk failed.
[    0.402617] registered taskstats version 1
[    0.402883]   Magic number: 15:705:633
[    0.402997] rtc_cmos 00:02: setting system clock to 2011-02-25 12:36:11 UTC (1298637371)
[    0.403002] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    0.403005] EDD information not available.
[    0.424163] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2
[    0.477534] ata1.00: ATA-6: WDC WD800JB-00FSA0, 77.07W77, max UDMA/100
[    0.477541] ata1.00: 156301488 sectors, multi 16: LBA48
[    0.491400] ata2.00: ATAPI: HL-DT-ST DVDRAM GSA-H10N, JL10, max UDMA/33
[    0.491454] ata2.01: ATAPI: HL-DT-ST GCE-8525B, 1.02, max UDMA/33
[    0.501492] ata4.00: ATA-8: WDC WD5000AADS-00S9B0, 01.00A01, max UDMA/133
[    0.501499] ata4.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[    0.508365] ata2.00: configured for UDMA/33
[    0.516650] ata2.01: configured for UDMA/33
[    0.517825] ata4.00: configured for UDMA/133
[    0.535956] ata1.00: configured for UDMA/100
[    0.615872] Freeing initrd memory: 10508k freed
[    0.666576] isapnp: No Plug & Play device found
[    0.666831] scsi 0:0:0:0: Direct-Access     ATA      WDC WD800JB-00FS 77.0 PQ: 0 ANSI: 5
[    0.667082] sd 0:0:0:0: [sda] 156301488 512-byte logical blocks: (80.0 GB/74.5 GiB)
[    0.667179] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    0.667205] sd 0:0:0:0: [sda] Write Protect is off
[    0.667212] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    0.667269] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    0.667626]  sda:
[    0.671082] scsi 1:0:0:0: CD-ROM            HL-DT-ST DVDRAM GSA-H10N  JL10 PQ: 0 ANSI: 5
[    0.683516] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[    0.683522] Uniform CD-ROM driver Revision: 3.20
[    0.683694] sr 1:0:0:0: Attached scsi CD-ROM sr0
[    0.683798] sr 1:0:0:0: Attached scsi generic sg1 type 5
[    0.684150] scsi 1:0:1:0: CD-ROM            HL-DT-ST CD-RW GCE-8525B  1.02 PQ: 0 ANSI: 5
[    0.685030]  sda1 sda2 <sr1: scsi3-mmc drive: 40x/52x writer cd/rw xa/form2 cdda tray
[    0.687363] sr 1:0:1:0: Attached scsi CD-ROM sr1
[    0.687450] sr 1:0:1:0: Attached scsi generic sg2 type 5
[    0.687644] scsi 3:0:0:0: Direct-Access     ATA      WDC WD5000AADS-0 01.0 PQ: 0 ANSI: 5
[    0.687859] sd 3:0:0:0: [sdb] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[    0.687898] sd 3:0:0:0: Attached scsi generic sg3 type 0
[    0.688000] sd 3:0:0:0: [sdb] Write Protect is off
[    0.688006] sd 3:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[    0.688075] sd 3:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    0.688410]  sdb: sdb1 sdb2 < sda5 >
[    0.716047] sd 0:0:0:0: [sda] Attached SCSI disk
[    0.727156]  sdb5 > sdb3
[    0.727650] sd 3:0:0:0: [sdb] Attached SCSI disk
[    0.727675] Freeing unused kernel memory: 688k freed
[    0.728680] Write protecting the kernel text: 4936k
[    0.728756] Write protecting the kernel read-only data: 1976k
[    0.762531] udev[83]: starting version 163
[    0.836020] usb 3-2: new low speed USB device using uhci_hcd and address 2
[    1.066833] e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI
[    1.066846] e100: Copyright(c) 1999-2006 Intel Corporation
[    1.066936]   alloc irq_desc for 20 on node -1
[    1.066948]   alloc kstat_irqs on node -1
[    1.066973] e100 0000:02:08.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[    1.085517] Floppy drive(s): fd0 is 1.44M
[    1.089991] e100 0000:02:08.0: PME# disabled
[    1.119847] e100 0000:02:08.0: eth0: addr 0xfeaef000, irq 20, MAC addr 00:0c:f1:ae:74:d6
[    1.132757] FDC 0 is a National Semiconductor PC87306
[    1.165406] usbcore: registered new interface driver hiddev
[    1.179031] input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:1d.1/usb3/3-2/3-2:1.0/input/input3
[    1.179316] generic-usb 0003:046D:C00E.0001: input,hidraw0: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:1d.1-2/input0
[    1.179359] usbcore: registered new interface driver usbhid
[    1.179364] usbhid: USB HID core driver
[    1.332942] EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: (null)
[    3.087683] Adding 4603900k swap on /dev/sdb5.  Priority:-1 extents:1 across:4603900k
[    4.523806] udev[319]: starting version 163
[    4.874572] EXT4-fs (sdb1): re-mounted. Opts: errors=remount-ro
[    6.383221] Linux agpgart interface v0.103
[    6.441950] agpgart-intel 0000:00:00.0: Intel 865 Chipset
[    6.447462] agpgart-intel 0000:00:00.0: AGP aperture is 128M @ 0xf0000000
[    6.748570] type=1400 audit(1298637377.842:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient3" pid=468 comm="apparmor_parser"
[    6.749172] type=1400 audit(1298637377.842:3): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=468 comm="apparmor_parser"
[    6.749509] type=1400 audit(1298637377.842:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=468 comm="apparmor_parser"
[    6.969093] Intel 82802 RNG detected
[    6.970485] lp: driver loaded but no devices found
[    7.049236] parport_pc 00:08: reported by Plug and Play ACPI
[    7.049297] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
[    7.089983] ppdev: user-space parallel port driver
[    7.145516] lp0: using parport0 (interrupt-driven).
[    7.172670] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[    7.849238] EXT4-fs (sdb3): warning: maximal mount count reached, running e2fsck is recommended
[    7.896950] EXT4-fs (sdb3): mounted filesystem with ordered data mode. Opts: (null)
[    8.468935] nvidia: module license 'NVIDIA' taints kernel.
[    8.468941] Disabling lock debugging due to kernel taint
[    8.831617]   alloc irq_desc for 17 on node -1
[    8.831623]   alloc kstat_irqs on node -1
[    8.831636] Intel ICH 0000:00:1f.5: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[    8.831684] Intel ICH 0000:00:1f.5: setting latency timer to 64
[    9.149282] nvidia 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    9.149301] vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
[    9.151692] NVRM: loading NVIDIA UNIX x86 Kernel Module  173.14.28  Wed Sep 29 09:47:25 PDT 2010
[    9.259178] intel8x0_measure_ac97_clock: measured 57516 usecs (2771 samples)
[    9.259185] intel8x0: clocking to 48000
[   10.819010] type=1400 audit(1298637381.910:5): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient3" pid=774 comm="apparmor_parser"
[   10.819704] type=1400 audit(1298637381.910:6): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=774 comm="apparmor_parser"
[   10.820114] type=1400 audit(1298637381.914:7): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=774 comm="apparmor_parser"
[   10.851606] type=1400 audit(1298637381.942:8): apparmor="STATUS" operation="profile_load" name="/usr/sbin/mysqld-akonadi" pid=777 comm="apparmor_parser"
[   10.869743] type=1400 audit(1298637381.962:9): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=776 comm="apparmor_parser"
[   10.869876] type=1400 audit(1298637381.962:10): apparmor="STATUS" operation="profile_load" name="/usr/sbin/tcpdump" pid=782 comm="apparmor_parser"
[   10.870744] type=1400 audit(1298637381.962:11): apparmor="STATUS" operation="profile_load" name="/usr/sbin/cupsd" pid=776 comm="apparmor_parser"
[   15.289157] ADDRCONF(NETDEV_UP): eth0: link is not ready
[   15.292147] e100 0000:02:08.0: eth0: NIC Link is Up 100 Mbps Full Duplex
[   15.300310] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[   16.090254] agpgart-intel 0000:00:00.0: AGP 3.0 bridge
[   16.090291] agpgart-intel 0000:00:00.0: putting AGP V3 device into 8x mode
[   16.090359] nvidia 0000:01:00.0: putting AGP V3 device into 8x mode
[   17.302345] EXT4-fs (sdb1): re-mounted. Opts: errors=remount-ro,commit=0
[   17.310710] EXT4-fs (sdb3): re-mounted. Opts: commit=0
[   25.808011] eth0: no IPv6 routers present
[   30.786447] EXT4-fs (sdb1): re-mounted. Opts: errors=remount-ro,commit=0
[   30.794266] EXT4-fs (sdb3): re-mounted. Opts: commit=0

OUF!

(Après je pourrai l'éditer pour couper le superflu pour alléger la discussion     )

Dernière modification par turzin (Le 25/02/2011, à 14:48)

---

QuadCore Q6600, 2,4GHz, 8Go RAM, Xubuntu 12.04