Ubuntu-fr

Pitland

Wifi fonctionne plus sur WG311 V2 module ACX111

Bonjour,

Suis venu a la Ubunut party samedi dernier su Paris, je me suis aidé pour l'install d'ubuntu et plusieurs
mecs super sympas ce sont occupés de mon problème de carte wifi dan sun premier temps ils ont essayer
avec ndiswrapper mais pas top selon eux et finalement ils ont chargé le driver correspodant au chipste de
la cvarte Wifi (acx111). Sur place ça avait l'air de marcher on voyait apparaitre la liste des réseaux wifi dispo.
Arrivé chez moi je me lance je recherche un reseau wifi, j arrive à trouver mon réseau sans trop de problème
je procède aux mise à jour de ubuntu je m absente le temps de manger (entre temps déco de freebox des 24h)
puis je retourne sur le pc et le wifi fonctionne plus.
j'ai fait un Dmesg et voilà le résultat.

[4294667.296000] Linux version 2.6.15-23-386 (buildd@rothera) (gcc version 4.0.3  (Ubuntu 4.0.3-1ubuntu5)) #1 PREEMPT Tue May 23 13:49:40 UTC 2006
[4294667.296000] BIOS-provided physical RAM map:
[4294667.296000]  BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[4294667.296000]  BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[4294667.296000]  BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[4294667.296000]  BIOS-e820: 0000000000100000 - 000000001fff0000 (usable)
[4294667.296000]  BIOS-e820: 000000001fff0000 - 000000001fff3000 (ACPI NVS)
[4294667.296000]  BIOS-e820: 000000001fff3000 - 0000000020000000 (ACPI data)
[4294667.296000]  BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
[4294667.296000] 0MB HIGHMEM available.
[4294667.296000] 511MB LOWMEM available.
[4294667.296000] On node 0 totalpages: 131056
[4294667.296000]   DMA zone: 4096 pages, LIFO batch:0
[4294667.296000]   DMA32 zone: 0 pages, LIFO batch:0
[4294667.296000]   Normal zone: 126960 pages, LIFO batch:31
[4294667.296000]   HighMem zone: 0 pages, LIFO batch:0
[4294667.296000] DMI 2.3 present.
[4294667.296000] ACPI: RSDP (v000 VIA694                                ) @ 0x00 0f6fb0
[4294667.296000] ACPI: RSDT (v001 VIA694 AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x1fff3000
[4294667.296000] ACPI: FADT (v001 VIA694 AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x1fff3040
[4294667.296000] ACPI: DSDT (v001 VIA694 AWRDACPI 0x00001000 MSFT 0x0100000c) @ 0x00000000
[4294667.296000] ACPI: PM-Timer IO Port: 0x4008
[4294667.296000] Allocating PCI resources starting at 30000000 (gap: 20000000:df ff0000)
[4294667.296000] Built 1 zonelists
[4294667.296000] Kernel command line: root=/dev/hdc1 ro quiet splash
[4294667.296000] Local APIC disabled by BIOS (or by default) -- you can enable i t with "lapic"
[4294667.296000] mapped APIC to ffffd000 (01402000)
[4294667.296000] Initializing CPU#0
[4294667.296000] PID hash table entries: 2048 (order: 11, 32768 bytes)
[4294667.296000] Detected 936.204 MHz processor.
[4294667.296000] Using pmtmr for high-res timesource
[4294667.296000] Console: colour VGA+ 80x25
[4294671.155000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes )
[4294671.158000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[4294671.209000] Memory: 508596k/524224k available (1976k kernel code, 15028k re served, 606k data, 288k init, 0k highmem)
[4294671.209000] Checking if this processor honours the WP bit even in superviso r mode... Ok.
[4294671.269000] Calibrating delay using timer specific routine.. 1872.44 BogoMI PS (lpj=936220)
[4294671.269000] Security Framework v1.0.0 initialized
[4294671.269000] SELinux:  Disabled at boot.
[4294671.269000] Mount-cache hash table entries: 512
[4294671.269000] CPU: After generic identify, caps: 0383f9ff 00000000 00000000 0 0000000 00000000 00000000 00000000
[4294671.269000] CPU: After vendor identify, caps: 0383f9ff 00000000 00000000 00 000000 00000000 00000000 00000000
[4294671.269000] CPU: L1 I cache: 16K, L1 D cache: 16K
[4294671.269000] CPU: L2 cache: 256K
[4294671.269000] CPU: After all inits, caps: 0383f9ff 00000000 00000000 00000040  00000000 00000000 00000000
[4294671.269000] mtrr: v2.0 (20020519)
[4294671.269000] CPU: Intel Pentium III (Coppermine) stepping 03
[4294671.269000] Enabling fast FPU save and restore... done.
[4294671.269000] Enabling unmasked SIMD FPU exception support... done.
[4294671.269000] Checking 'hlt' instruction... OK.
[4294671.273000] checking if image is initramfs... it is
[4294672.963000] Freeing initrd memory: 6838k freed
[4294672.989000] ACPI: Looking for DSDT ... not found!
[4294672.991000] ACPI: setting ELCR to 0200 (from 0e20)
[4294673.119000] NET: Registered protocol family 16
[4294673.119000] EISA bus registered
[4294673.119000] ACPI: bus type pci registered
[4294673.136000] PCI: PCI BIOS revision 2.10 entry at 0xfb520, last bus=1
[4294673.136000] PCI: Using configuration type 1
[4294673.137000] ACPI: Subsystem revision 20051216
[4294673.147000] ACPI: Interpreter enabled
[4294673.147000] ACPI: Using PIC for interrupt routing
[4294673.148000] ACPI: PCI Root Bridge [PCI0] (0000:00)
[4294673.148000] PCI: Probing PCI hardware (bus 00)
[4294673.149000] ACPI: Assume root bridge [\_SB_.PCI0] bus is 0
[4294673.152000] PCI quirk: region 4000-40ff claimed by vt82c586 ACPI
[4294673.152000] PCI quirk: region 6000-607f claimed by vt82c686 HW-mon
[4294673.152000] PCI quirk: region 5000-500f claimed by vt82c686 SMB
[4294673.152000] Boot video device is 0000:01:00.0
[4294673.152000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[4294673.178000] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 *5 6 7 10 11 12 14 15)
[4294673.179000] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 10 11 12 14 1 5) *0, disabled.
[4294673.179000] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 *11 12 14 15)
[4294673.180000] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 *10 11 12 14 15)
[4294673.184000] Linux Plug and Play Support v0.97 (c) Adam Belay
[4294673.184000] pnp: PnP ACPI init
[4294673.190000] pnp: PnP ACPI: found 12 devices
[4294673.190000] PnPBIOS: Disabled by ACPI PNP
[4294673.190000] PCI: Using ACPI for IRQ routing
[4294673.190000] PCI: If a device doesn't work, try "pci=routeirq".  If it helps , post a report
[4294673.235000] PCI: Bridge: 0000:00:01.0
[4294673.235000]   IO window: disabled.
[4294673.235000]   MEM window: e4000000-e5ffffff
[4294673.235000]   PREFETCH window: d0000000-dfffffff
[4294673.235000] PCI: Setting latency timer of device 0000:00:01.0 to 64
[4294673.236000] audit: initializing netlink socket (disabled)
[4294673.236000] audit(1150131257.235:1): initialized
[4294673.236000] VFS: Disk quotas dquot_6.5.1
[4294673.236000] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[4294673.236000] Initializing Cryptographic API
[4294673.236000] io scheduler noop registered
[4294673.236000] io scheduler anticipatory registered
[4294673.236000] io scheduler deadline registered
[4294673.237000] io scheduler cfq registered
[4294673.237000] PCI: Disabling Via external APIC routing
[4294673.237000] isapnp: Scanning for PnP cards...
[4294673.595000] isapnp: No Plug & Play device found
[4294673.626000] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 i rq 1,12
[4294673.627000] serio: i8042 AUX port at 0x60,0x64 irq 12
[4294673.627000] serio: i8042 KBD port at 0x60,0x64 irq 1
[4294673.627000] Serial: 8250/16550 driver $Revision: 1.90 $ 48 ports, IRQ shari ng enabled
[4294673.627000] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[4294673.627000] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[4294673.632000] 00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[4294673.633000] 00:08: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[4294673.634000] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 bl ocksize
[4294673.634000] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[4294673.634000] ide: Assuming 33MHz system bus speed for PIO modes; override wi th idebus=xx
[4294673.634000] mice: PS/2 mouse device common for all mice
[4294673.634000] EISA: Probing bus 0 at eisa.0
[4294673.634000] Cannot allocate resource for EISA slot 4
[4294673.634000] Cannot allocate resource for EISA slot 5
[4294673.634000] Cannot allocate resource for EISA slot 6
[4294673.634000] EISA: Detected 0 cards.
[4294673.634000] NET: Registered protocol family 2
[4294673.644000] IP route cache hash table entries: 8192 (order: 3, 32768 bytes)
[4294673.644000] TCP established hash table entries: 32768 (order: 5, 131072 byt es)
[4294673.644000] TCP bind hash table entries: 32768 (order: 5, 131072 bytes)
[4294673.645000] TCP: Hash tables configured (established 32768 bind 32768)
[4294673.645000] TCP reno registered
[4294673.645000] TCP bic registered
[4294673.645000] NET: Registered protocol family 1
[4294673.645000] NET: Registered protocol family 8
[4294673.645000] NET: Registered protocol family 20
[4294673.645000] Using IPI Shortcut mode
[4294673.646000] ACPI wakeup devices:
[4294673.646000] SLPB PCI0 USB0 USB1 MODM UAR1 UAR2
[4294673.646000] ACPI: (supports S0 S1 S4 S5)
[4294673.646000] Freeing unused kernel memory: 288k freed
[4294673.656000] input: AT Translated Set 2 keyboard as /class/input/input0
[4294673.756000] vga16fb: initializing
[4294673.756000] vga16fb: mapped to 0xc00a0000
[4294673.880000] Console: switching to colour frame buffer device 80x25
[4294673.880000] fb0: VGA16 VGA frame buffer device
[4294674.998000] Capability LSM initialized
[4294675.069000] ACPI: CPU0 (power states: C1[C1] C2[C2])
[4294675.069000] ACPI: Processor [CPU0] (supports 2 throttling states)
[4294676.091000] VP_IDE: IDE controller at PCI slot 0000:00:07.1
[4294676.091000] PCI: Via IRQ fixup for 0000:00:07.1, from 255 to 0
[4294676.091000] VP_IDE: chipset revision 16
[4294676.091000] VP_IDE: not 100% native mode: will probe irqs later
[4294676.091000] VP_IDE: VIA vt82c686a (rev 22) IDE UDMA66 controller on pci0000 :00:07.1
[4294676.091000]     ide0: BM-DMA at 0xd000-0xd007, BIOS settings: hda:pio, hdb: DMA
[4294676.091000]     ide1: BM-DMA at 0xd008-0xd00f, BIOS settings: hdc:DMA, hdd: pio
[4294676.091000] Probing IDE interface ide0...
[4294677.140000] hdb: _NEC DV-5700B, ATAPI CD/DVD-ROM drive
[4294677.191000] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[4294677.192000] Probing IDE interface ide1...
[4294677.578000] hdc: Maxtor 90650U2, ATA DISK drive
[4294677.578000] hdc: IRQ probe failed (0xffffbdf8)
[4294678.312000] ide1 at 0x170-0x177,0x376 on irq 15
[4294678.343000] hdb: ATAPI 40X DVD-ROM drive, 256kB Cache, UDMA(33)
[4294678.343000] Uniform CD-ROM driver Revision: 3.20
[4294678.359000] hdc: max request size: 128KiB
[4294678.376000] hdc: 12594960 sectors (6448 MB) w/2048KiB Cache, CHS=13328/15/6 3, UDMA(66)
[4294678.376000] hdc: cache flushes not supported
[4294678.376000]  hdc:hdc: dma_intr: status=0x51 { DriveReady SeekComplete Error  }
[4294678.411000] hdc: dma_intr: error=0x84 { DriveStatusError BadCRC }
[4294678.411000] ide: failed opcode was: unknown
[4294678.466000] hdc: dma_intr: status=0x51 { DriveReady SeekComplete Error }
[4294678.466000] hdc: dma_intr: error=0x84 { DriveStatusError BadCRC }
[4294678.467000] ide: failed opcode was: unknown
[4294678.522000] hdc: dma_intr: status=0x51 { DriveReady SeekComplete Error }
[4294678.522000] hdc: dma_intr: error=0x84 { DriveStatusError BadCRC }
[4294678.522000] ide: failed opcode was: unknown
[4294678.578000] hdc: dma_intr: status=0x51 { DriveReady SeekComplete Error }
[4294678.578000] hdc: dma_intr: error=0x84 { DriveStatusError BadCRC }
[4294678.578000] ide: failed opcode was: unknown
[4294679.278000] ide1: reset: success
[4294679.300000]  hdc1 hdc2 hdc3
[4294679.769000] usbcore: registered new driver usbfs
[4294679.769000] usbcore: registered new driver hub
[4294679.773000] USB Universal Host Controller Interface driver v2.3
[4294679.774000] **** SET: Misaligned resource pointer: dfc916e2 Type 07 Len 0
[4294679.775000] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 10
[4294679.775000] PCI: setting IRQ 10 as level-triggered
[4294679.775000] ACPI: PCI Interrupt 0000:00:07.2[D] -> Link [LNKD] -> GSI 10 (l evel, low) -> IRQ 10
[4294679.775000] uhci_hcd 0000:00:07.2: UHCI Host Controller
[4294679.776000] uhci_hcd 0000:00:07.2: new USB bus registered, assigned bus num ber 1
[4294679.776000] uhci_hcd 0000:00:07.2: irq 10, io base 0x0000d400
[4294679.777000] hub 1-0:1.0: USB hub found
[4294679.777000] hub 1-0:1.0: 2 ports detected
[4294679.878000] ACPI: PCI Interrupt 0000:00:07.3[D] -> Link [LNKD] -> GSI 10 (l evel, low) -> IRQ 10
[4294679.878000] uhci_hcd 0000:00:07.3: UHCI Host Controller
[4294679.878000] uhci_hcd 0000:00:07.3: new USB bus registered, assigned bus num ber 2
[4294679.878000] uhci_hcd 0000:00:07.3: irq 10, io base 0x0000d800
[4294679.879000] hub 2-0:1.0: USB hub found
[4294679.879000] hub 2-0:1.0: 2 ports detected
[4294680.137000] Attempting manual resume
[4294680.169000] EXT3-fs: mounted filesystem with ordered data mode.
[4294680.200000] kjournald starting.  Commit interval 5 seconds
[4294698.751000] parport_pc: VIA 686A/8231 detected
[4294698.751000] parport_pc: probing current configuration
[4294698.751000] parport_pc: Current parallel port base: 0x378
[4294698.752000] parport0: PC-style at 0x378, irq 7 [PCSPP,EPP]
[4294698.795000] Linux agpgart interface v0.101 (c) Dave Jones
[4294698.814000] agpgart: Detected VIA Apollo Pro 133 chipset
[4294698.818000] agpgart: AGP aperture is 64M @ 0xe0000000
[4294698.834000] parport_pc: VIA parallel port: io=0x378, irq=7
[4294698.846000] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[4294698.875000] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[4294699.517000] Real Time Clock Driver v1.12
[4294699.519000] input: PC Speaker as /class/input/input1
[4294699.546000] 8139too Fast Ethernet driver 0.9.27
[4294699.546000] **** SET: Misaligned resource pointer: dae55f22 Type 07 Len 0
[4294699.547000] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11
[4294699.547000] PCI: setting IRQ 11 as level-triggered
[4294699.547000] ACPI: PCI Interrupt 0000:00:0b.0[A] -> Link [LNKC] -> GSI 11 (l evel, low) -> IRQ 11
[4294699.548000] eth0: RealTek RTL8139 at 0xe08f8000, 00:50:22:8d:06:2b, IRQ 11
[4294699.548000] eth0:  Identified 8139 chip type 'RTL-8139C'
[4294699.577000] 8139cp: 10/100 PCI Ethernet driver v1.2 (Mar 22, 2004)
[4294699.660000] nvidia: module license 'NVIDIA' taints kernel.
[4294699.662000] logips2pp: Detected unknown logitech mouse model 1
[4294699.675000] **** SET: Misaligned resource pointer: dae55e22 Type 07 Len 0
[4294699.676000] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 5
[4294699.676000] PCI: setting IRQ 5 as level-triggered
[4294699.676000] ACPI: PCI Interrupt 0000:01:00.0[A] -> Link [LNKA] -> GSI 5 (le vel, low) -> IRQ 5
[4294699.676000] NVRM: loading NVIDIA Linux x86 Kernel Module  1.0-8762  Mon May  15 13:06:38 PDT 2006
[4294699.754000] input: PS/2 Logitech Mouse as /class/input/input2
[4294700.504000] Floppy drive(s): fd0 is 1.44M
[4294700.518000] FDC 0 is a post-1991 82077
[4294701.335000] ts: Compaq touchscreen protocol output
[4294701.701000] ACPI: PCI Interrupt 0000:00:07.5[C] -> Link [LNKC] -> GSI 11 (l evel, low) -> IRQ 11
[4294701.702000] PCI: Setting latency timer of device 0000:00:07.5 to 64
[4294702.878000] lp0: using parport0 (interrupt-driven).
[4294702.977000] acx: Loaded combined PCI/USB driver, firmware_ver=default
[4294702.977000] acx: compiled to use 32bit I/O access. I/O timing issues might occur, such as non-working firmware upload. Report them
[4294702.979000] ACPI: PCI Interrupt 0000:00:11.0[A] -> Link [LNKD] -> GSI 10 (l evel, low) -> IRQ 10
[4294702.979000] acx: found ACX111-based wireless network card at 0000:00:11.0, irq:10, phymem1:0xE6020000, phymem2:0xE6000000, mem1:0xe0a68000, mem1_size:8192,  mem2:0xe0b00000, mem2_size:131072
[4294703.758000] acx: firmware 'Rev 2.3.1.31' does not work well with this drive r
[4294703.758000] acx: form factor 0x01 ((mini-)PCI / CardBus), radio type 0x16 ( Radia), EEPROM version 0x05, uploaded firmware 'Rev 2.3.1.31' (0x03010101)
[4294703.758000] acx v0.3.21: net device wlan0, driver compiled against wireless  extensions 19 and Linux 2.6.15-23-386
[4294703.759000] usbcore: registered new driver acx_usb
[4294703.909000] Adding 522104k swap on /dev/hdc2.  Priority:-1 extents:1 across :522104k
[4294704.058000] EXT3 FS on hdc1, internal journal
[4294704.406000] md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
[4294704.406000] md: bitmap version 4.39
[4294705.045000] device-mapper: 4.4.0-ioctl (2005-01-12) initialised: dm-devel@r edhat.com
[4294706.435000] kjournald starting.  Commit interval 5 seconds
[4294706.435000] EXT3 FS on hdc3, internal journal
[4294706.435000] EXT3-fs: mounted filesystem with ordered data mode.
[4294708.084000] ACPI: Power Button (FF) [PWRF]
[4294708.084000] ACPI: Power Button (CM) [PWRB]
[4294708.084000] ACPI: Sleep Button (CM) [SLPB]
[4294708.302000] ibm_acpi: ec object not found
[4294708.347000] pcc_acpi: loading...
[4294717.086000] ppdev: user-space parallel port driver
[4294717.529000] apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac)
[4294717.529000] apm: overridden by ACPI.
[4294718.900000] wlan0 (WE) : Driver using old /proc/net/wireless support, pleas e fix driver !
[4294722.137000] Bluetooth: Core ver 2.8
[4294722.137000] NET: Registered protocol family 31
[4294722.137000] Bluetooth: HCI device and connection manager initialized
[4294722.137000] Bluetooth: HCI socket layer initialized
[4294722.239000] Bluetooth: L2CAP ver 2.8
[4294722.239000] Bluetooth: L2CAP socket layer initialized
[4294722.259000] Bluetooth: RFCOMM socket layer initialized
[4294722.259000] Bluetooth: RFCOMM TTY layer initialized
[4294722.259000] Bluetooth: RFCOMM ver 1.7
[4294738.246000] NET: Registered protocol family 10
[4294738.246000] lo: Disabled Privacy Extensions
[4294738.246000] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[4294738.246000] IPv6 over IPv4 tunneling driver
[4294888.519000] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[4294889.576000] NET: Registered protocol family 17
[4294968.070000] eth1: link up, 100Mbps, full-duplex, lpa 0x41E1
[4294978.954000] eth1: no IPv6 routers present
[4296140.300000] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[4296398.011000] eth1: link up, 100Mbps, full-duplex, lpa 0x41E1
[4296408.064000] eth1: no IPv6 routers present

Merci pour votre aide

cflam69

Re : Wifi fonctionne plus sur WG311 V2 module ACX111

Merci de mettre un dmesg complet dans des balises codes.
Sinon, moi je te conseille ndiswrapper car pas mal semble avoir installé ton wg311v2 avec ce programme (à confirmer). Il faut alors blacklister les modules qui interférent.

Sinon, avec acx, je connais pas. Persévère dans ce sens avant de t'intéresser plus avant à ndiswrapper si cela ne fonctionne pas.
Je te propose d'essayer :
sudo ifdown eth1
sudo ifup eth1

ou alors
sudo /etc/init.d./networking restart

---

La liberté ne s'use que si l'on ne s'en sert pas.