Ubuntu-fr

=ô=

Configuration xorg.conf et accès à "Paramètres du système"

Bonjour,
Pour pouvoir paramétret le double affichage sur deux écrans CRT (TwinView sur carte nvidia), j'ai du modifier "au clavier" xorg.conf.
Mon Double affichage marche très bien, mais (toujours un mais !), depuis mon paramétrage, je ne peux plus accéder en mode graphique à la rubrique "Affichage" de Paramètres du système (systemsettings).
Quequ'un a t il une idée sur ce qui cloche ?
Merci

Précisons : Kubuntu 6.06
Le contenu de xorg.conf (à partir de la section Device" :

Section “Device”
identifier “NVIDIA Corporation NV37GL [Quadro FX 330]”
boardname “NVIDIA GeForce FX (generic)”
busid “PCI:1:0:0″
driver “nvidia”
screen 0
vendorname “NVIDIA”
Option “TwinView”
Option “MetaModes” “1280×1024, 1152×864″
#Option “ConnectedMonitor” “CRT-0, CRT-1″
Option “NoLogo”
EndSection

Section “Monitor”
identifier “COMPAQ V700″
vendorname “Compaq”
modelname “Compaq V700 Color Monitor”
HorizSync 30.0-85.0
VertRefresh 50.0-160.0
modeline “640×480@60″ 25.2 640 656 752 800 480 490 492 525 -vsync -hsync
modeline “640×480@72″ 31.5 640 664 704 832 480 489 491 520 -vsync -hsync
modeline “640×480@75″ 31.5 640 656 720 840 480 481 484 500 -vsync -hsync
modeline “640×480@85″ 36.0 640 696 752 832 480 481 484 509 -vsync -hsync
modeline “800×600@56″ 36.0 800 824 896 1024 600 601 603 625 +hsync +vsync
modeline “800×600@72″ 50.0 800 856 976 1040 600 637 643 666 +hsync +vsync
modeline “800×600@75″ 49.5 800 816 896 1056 600 601 604 625 +hsync +vsync
modeline “800×600@85″ 56.3 800 832 896 1048 600 601 604 631 +hsync +vsync
modeline “800×600@60″ 40.0 800 840 968 1056 600 601 605 628 +hsync +vsync
modeline “832×624@75″ 57.284 832 864 928 1152 624 625 628 667 -vsync -hsync
modeline “1024×768@85″ 94.5 1024 1072 1168 1376 768 769 772 808 +hsync +vsync
modeline “1024×768@75″ 78.8 1024 1040 1136 1312 768 769 772 800 +hsync +vsync
modeline “1024×768@70″ 75.0 1024 1048 1184 1328 768 771 777 806 -vsync -hsync
modeline “1024×768@60″ 65.0 1024 1048 1184 1344 768 771 777 806 -vsync -hsync
modeline “1024×768@43″ 44.9 1024 1032 1208 1264 768 768 776 817 +hsync interlace +vsync
modeline “1152×864@75″ 108.0 1152 1216 1344 1600 864 865 868 900 +hsync +vsync
modeline “1152×768@54″ 64.995 1152 1178 1314 1472 768 771 777 806 +hsync +vsync
modeline “1280×854″ 80.0 1280 1309 1460 1636 854 857 864 896 +hsync +vsync
modeline “1280×1024@75″ 135.0 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync
modeline “1280×960@60″ 102.1 1280 1360 1496 1712 960 961 964 994 -hsync +vsync
modeline “1280×1024@60″ 108.0 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync
modeline “1280×960@75″ 129.86 1280 1368 1504 1728 960 961 964 1002 -hsync +vsync
modeline “1400×1050@60″ 122.61 1400 1488 1640 1880 1050 1051 1054 1087 -hsync +vsync
modeline “1400×1050@75″ 155.85 1400 1496 1648 1896 1050 1051 1054 1096 -hsync +vsync
modeline “1600×1200@65″ 175.5 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync
modeline “1600×1200@60″ 162.0 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync
modeline “1792×1344@60″ 204.8 1792 1920 2120 2448 1344 1345 1348 1394 -hsync +vsync
gamma 1.0
EndSection

Section “Screen”
Identifier “Default Screen”
Device “NVIDIA Corporation NV37GL [Quadro FX 330]”
Monitor “COMPAQ V700″
DefaultDepth 24
SubSection “Display”
depth 24
modes “1280×1024@60″ “1280×960@75″ “1280×960@60″ “1400×1050@60″ “1280×1024@75″ “1400×1050@75″ “1280×854″ “1600×1200@65″ “1152×768@54″ “1600×1200@60″ “1152×864@75″ “1792×1344@60″ “1024×768@43″ “1024×768@60″ “1024×768@70″ “1024×768@75″ “1024×768@85″ “832×624@75″ “800×600@60″ “800×600@85″ “800×600@75″ “800×600@72″ “800×600@56″ “640×480@85″ “640×480@75″ “640×480@72″ “640×480@60″
EndSubSection
EndSection

Section “Screen”
Identifier “Second Screen”
Device “NVIDIA Corporation NV37GL [Quadro FX 330]”
Monitor “COMPAQ V700″
DefaultDepth 24
SubSection “Display”
depth 24
modes “1280×1024@60″ “1280×960@75″ “1280×960@60″ “1400×1050@60″ “1280×1024@75″ “1400×1050@75″ “1280×854″ “1600×1200@65″ “1152×768@54″ “1600×1200@60″ “1152×864@75″ “1792×1344@60″ “1024×768@43″ “1024×768@60″ “1024×768@70″ “1024×768@75″ “1024×768@85″ “832×624@75″ “800×600@60″ “800×600@85″ “800×600@75″ “800×600@72″ “800×600@56″ “640×480@85″ “640×480@75″ “640×480@72″ “640×480@60″
EndSubSection
EndSection

Section “ServerLayout”
Identifier “Default Layout”
screen 0 “Default Screen” 0 0
screen 1 “Second Screen” RightOf “Default Screen”
InputDevice “Generic Keyboard”
InputDevice “Configured Mouse”
InputDevice “stylus” “SendCoreEvents”
InputDevice “cursor” “SendCoreEvents”
InputDevice “eraser” “SendCoreEvents”
EndSection

Section “DRI”
Mode 0666
EndSection
Section “ServerFlags”
EndSection
#FIN

Dernière modification par =ô= (Le 21/06/2006, à 07:43)

RedMorgan

Re : Configuration xorg.conf et accès à "Paramètres du système"

petit up, j'ai le même problème...
lorsque j'active l'option twinview de mon xorg, "imposible de charger le module affichage"

 
Section "Device"
	Identifier	"NVIDIA Corporation NV28 [GeForce4 Ti 4200 AGP 8x]"
	Driver		"nvidia"
	BusID		"PCI:1:0:0"
	VideoRam	128000
	Option		"UseFBDev"		"true"
	Option "NvAGP" "4"
	Option "NoLogo" "1"
	Option "RenderAccel" "true"
	Option "CursorShadow" "true"
	Option "Coolbits" "0"
	Option "ConnectedMonitor" "lcd, lcd"
	Option "NoPowerConnectorCheck"
	Option "TwinView" "1"
	Option "Metamodes" "1280x1024,1280x1024; 1024x768,1024x768
EndSection