#1 Le 30/04/2011, à 19:17
- FPNexuS
Redémarage en boucle après installation 11.04
Bonjour à tous et à toutes.
Je suis sur la 11.04 depuis hier soir et pour une fois je n'ai rencontré aucun soucis d'installation. En revanche j'ai du revenir sur mon windows ce jour et depuis, dès que je boot, il n'a de cesse de redémarrer.
La séquence de démarrage se passe normalement jusqu'au moment ou je devrais voir l'affichage de GRUB me proposant l'alternative entre mon windows et mon linux. A ce moment précis, allez hop on recommence.... Depuis hier j'ai démarré de nombreuse fois sur la 11.04 en ayant bien au préalable le choix entre mes deux systèmes. Il ne m'a fallut qu'un seul boot sur windows pour avoir ce souci. Je n'ai eu aucun plantage sur mon windows et celui ci s'est arrete correctement.
Windows est installé sur le SDA et Linux sur le SDB. Il s'agit bien de deux disques physiques séparés et GRUB et installé sur le SDB.
Hors ligne
#2 Le 30/04/2011, à 19:25
- sinbad83
Re : Redémarage en boucle après installation 11.04
Salut,
peux-tu installer Boot Info Script à partir de http://bootinfoscript.sourceforge.net/, suivre la procédure indiquée et donner le contenu de Results.txt ?
La connaissance n'est pas une denrée rare, il faut la partager avec les autres.
Linux registered #484707
Site: www.coursinforev.org/doku.php
Desktop AMD Ryzen 5-3600, RAM 16GB, Ubuntu 20.10, HP Pavillon G6 Ubuntu 20.10 et Ten, Serveur Ubuntu 18.04
Hors ligne
#3 Le 30/04/2011, à 19:30
- FPNexuS
Re : Redémarage en boucle après installation 11.04
Malheureusement non.
Mon PC reboot continuellement avant que je ne puisse choisir l'un ou l'autre des systèmes. Je ne peux donc rien installer
Hors ligne
#4 Le 30/04/2011, à 19:32
- sinbad83
Re : Redémarage en boucle après installation 11.04
Regarde ce que donnent les commandes en LiveCD.
La connaissance n'est pas une denrée rare, il faut la partager avec les autres.
Linux registered #484707
Site: www.coursinforev.org/doku.php
Desktop AMD Ryzen 5-3600, RAM 16GB, Ubuntu 20.10, HP Pavillon G6 Ubuntu 20.10 et Ten, Serveur Ubuntu 18.04
Hors ligne
#5 Le 30/04/2011, à 19:49
- FPNexuS
Re : Redémarage en boucle après installation 11.04
Voici donc le résultat
Boot Info Script 0.55 dated February 15th, 2010
============================= Boot Info Summary: ==============================
=> Grub 2 is installed in the MBR of /dev/sda and looks on the same drive in
partition #1 for cbdc4.
=> No boot loader is installed in the MBR of /dev/sdb
sda1: _________________________________________________________________________
File system: ntfs
Boot sector type: Windows Vista/7
Boot sector info: According to the info in the boot sector, sda1 starts
at sector 2048. But according to the info from fdisk,
sda1 starts at sector 63. The info in boot sector on
the starting sector of the MFT is wrong. The info in
the boot sector on the starting sector of the MFT
Mirror is wrong. According to the info in the boot
sector, sda1 has 204799999 sectors, but according to
the info from fdisk, it has 1984 sectors.
Operating System: Windows Vista
Boot files/dirs: /bootmgr /Boot/BCD /Windows/System32/winload.exe
sda2: _________________________________________________________________________
File system: ntfs
Boot sector type: Grub 2
Boot sector info: Grub 2 is installed in the boot sector of sda2 and
looks at sector 271103 of the same hard drive for
core.img, but core.img can not be found at this
location. According to the info in the boot sector,
sda2 starts at sector 204802048. But according to the
info from fdisk, sda2 starts at sector 2048.
Operating System:
Boot files/dirs:
sda3: _________________________________________________________________________
File system: ntfs
Boot sector type: Grub 2
Boot sector info: Grub 2 is installed in the boot sector of sda3 and
looks at sector 271103 of the same hard drive for
core.img, but core.img can not be found at this
location. According to the info in the boot sector,
sda3 starts at sector 409602048. But according to the
info from fdisk, sda3 starts at sector 204802048.
According to the info in the boot sector, sda3 has
204799999 sectors, but according to the info from
fdisk, it has 1045459631 sectors.
Operating System:
Boot files/dirs:
sdb1: _________________________________________________________________________
File system: ext4
Boot sector type: -
Boot sector info:
Operating System: Ubuntu 11.04
Boot files/dirs: /boot/grub/grub.cfg /etc/fstab /boot/grub/core.img
sdb2: _________________________________________________________________________
File system: Extended Partition
Boot sector type: -
Boot sector info:
sdb5: _________________________________________________________________________
File system: swap
Boot sector type: -
Boot sector info:
=========================== Drive/Partition Info: =============================
Drive: sda ___________________ _____________________________________________________
Disk /dev/sda: 640.1 GB, 640135028736 bytes
255 heads, 63 sectors/track, 77825 cylinders, total 1250263728 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
Partition Boot Start End Size Id System
/dev/sda1 63 2,047 1,985 42 SFS
/dev/sda2 * 2,048 204,802,047 204,800,000 42 SFS
/dev/sda3 204,802,048 1,250,261,679 1,045,459,632 42 SFS
Drive: sdb ___________________ _____________________________________________________
Disk /dev/sdb: 640.1 GB, 640135028736 bytes
255 heads, 63 sectors/track, 77825 cylinders, total 1250263728 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
Partition Boot Start End Size Id System
/dev/sdb1 2,048 1,054,949,375 1,054,947,328 83 Linux
/dev/sdb2 1,054,951,422 1,250,263,039 195,311,618 5 Extended
/dev/sdb5 1,054,951,424 1,250,263,039 195,311,616 82 Linux swap / Solaris
blkid -c /dev/null: ____________________________________________________________
Device UUID TYPE LABEL
/dev/loop0 squashfs
/dev/sda1 8874E83C74E82E9E ntfs
/dev/sda2 F8A0A3C9A0A38D26 ntfs Applications
/dev/sda3 8ABE9FF1BE9FD3D3 ntfs Franck
/dev/sda4 66E2B75DE2B72FE3 ntfs NexuS
/dev/sda5 18B8D173B8D1503C ntfs Jeux
/dev/sda: PTTYPE="dos"
/dev/sdb1 40f3825d-ff0f-4692-a22c-d5b202c47fc2 ext4
/dev/sdb2: PTTYPE="dos"
/dev/sdb5 41ef1de8-698d-4374-9a0b-121b37ad0d75 swap
/dev/sdb: PTTYPE="dos"
============================ "mount | grep ^/dev output: ===========================
Device Mount_Point Type Options
aufs / aufs (rw)
/dev/sr0 /cdrom iso9660 (ro,noatime)
/dev/loop0 /rofs squashfs (ro,noatime)
=========================== sdb1/boot/grub/grub.cfg: ===========================
#
# DO NOT EDIT THIS FILE
#
# It is automatically generated by grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
#
### BEGIN /etc/grub.d/00_header ###
if [ -s $prefix/grubenv ]; then
set have_grubenv=true
load_env
fi
set default="0"
if [ "${prev_saved_entry}" ]; then
set saved_entry="${prev_saved_entry}"
save_env saved_entry
set prev_saved_entry=
save_env prev_saved_entry
set boot_once=true
fi
function savedefault {
if [ -z "${boot_once}" ]; then
saved_entry="${chosen}"
save_env saved_entry
fi
}
function recordfail {
set recordfail=1
if [ -n "${have_grubenv}" ]; then if [ -z "${boot_once}" ]; then save_env recordfail; fi; fi
}
function load_video {
insmod vbe
insmod vga
insmod video_bochs
insmod video_cirrus
}
insmod part_msdos
insmod ext2
set root='(/dev/sdb,msdos1)'
search --no-floppy --fs-uuid --set=root 40f3825d-ff0f-4692-a22c-d5b202c47fc2
if loadfont /usr/share/grub/unicode.pf2 ; then
set gfxmode=auto
load_video
insmod gfxterm
fi
terminal_output gfxterm
insmod part_msdos
insmod ext2
set root='(/dev/sdb,msdos1)'
search --no-floppy --fs-uuid --set=root 40f3825d-ff0f-4692-a22c-d5b202c47fc2
set locale_dir=($root)/boot/grub/locale
set lang=fr_FR
insmod gettext
if [ "${recordfail}" = 1 ]; then
set timeout=-1
else
set timeout=10
fi
### END /etc/grub.d/00_header ###
### BEGIN /etc/grub.d/05_debian_theme ###
set menu_color_normal=white/black
set menu_color_highlight=black/light-gray
if background_color 44,0,30; then
clear
fi
### END /etc/grub.d/05_debian_theme ###
### BEGIN /etc/grub.d/10_linux ###
if [ ${recordfail} != 1 ]; then
if [ -e ${prefix}/gfxblacklist.txt ]; then
if hwmatch ${prefix}/gfxblacklist.txt 3; then
if [ ${match} = 0 ]; then
set linux_gfx_mode=keep
else
set linux_gfx_mode=text
fi
else
set linux_gfx_mode=text
fi
else
set linux_gfx_mode=keep
fi
else
set linux_gfx_mode=text
fi
export linux_gfx_mode
if [ "$linux_gfx_mode" != "text" ]; then load_video; fi
menuentry 'Ubuntu, with Linux 2.6.38-8-generic' --class ubuntu --class gnu-linux --class gnu --class os {
Hors ligne
#6 Le 01/05/2011, à 12:59
- FPNexuS
Re : Redémarage en boucle après installation 11.04
J'ai réinstallé la 11.04. Dès le premier démarage tout se passe bien. Je vois les options de grub me laissant le choix entre mon windows et ma 11.04
Je démarre sur mon windows, ca fonctionne correctement. J'éteins, je relance et là rien......
Après avoir lu pas mal de chose sur GRUB, lors de cette nouvelle installation j'ai positionné GRUB sur le disque sda (windows) en laissant mon linux sur le deuxième disque physique le sdb.
Rien n'y fait......
Je commence à m'en faire un peu sur mon utilisation de ubuntu sur cette machine....
Hors ligne
#7 Le 02/05/2011, à 19:43
- FPNexuS
Re : Redémarage en boucle après installation 11.04
Personne pour m'aider ?
Hors ligne