Contenu | Rechercher | Menus

Annonce

Si vous avez des soucis pour rester connecté, déconnectez-vous puis reconnectez-vous depuis ce lien en cochant la case
Me connecter automatiquement lors de mes prochaines visites.

À propos de l'équipe du forum.

#1 Le 26/06/2006, à 03:58

spokieszut

[RESOLU... au calva!] pb cdrom, clé usb, carte son...

Bon alors la j'vous le dis tout de suite les gars, j"suis véner de chez véner; alors faut pas m'en vouloir ni taper si je dis des conneries ou si j'vais etre direct. mad

Mais ce soir, j'ai du retourner sous Windows... et ça j'vous le dis, ça me prend vraiment les boules. mad
Après plus de 2 mois heureux passé avec ma Ubuntu (Breezy puis Dapper) traquillou; hop retour au playscool et tout ça pour ...  graver un krudnudju de CD !!! mad

Je m'explique:

J'ai un HP Compaq nx6110 Notebook avec un combo SONY CD-RW/DVD-ROM CRX835E dans le cul.
Une Dapper fraiche depuis sa parution, mise a jour.
Je m'apperçois aujourd'hui que j'ai qq pb avec mon cdrom; je change le CD et rien a faire le nom du precedent reste québlo... tout en ayant accés au data. bon je m'inquiete pas plus que cela; mais au prochain boot, bin, plus moyen d"ejecter le bordel de CD par le regular clic droit (pas les droits apparement...). J'commence a regarder a mon fstab; (voir si dessous), rien tout normal comme paramétré un bout bout de temps déjas (ro,user,noauto...), bien monté au bon endroit;

# /etc/fstab: static file system information.
#
# <file system> <mount point>   <type>  <options>       <dump>  <pass>
proc            /proc           proc    defaults        0       0
/dev/hda7       /               ext3    defaults,errors=remount-ro 0       1
/dev/hda6       none            swap    sw              0       0
/dev/hdb        /media/cdrom0   udf,iso9660 ro,user,noauto     0       0
# Partitions windoze
/dev/hda5       /media/datos    vfat    rw,user,auto,gid=100,uid=1000,umask=002,ioc$

bon, j'ejecte à la mano : sudo eject; ça roule; change de disk, et bin re-précédent titre.
Je demonte et remonte le volume (sudo mount...), pas de pb ca roule mais bin, re précedent titre de CD.
Bon, je pioche dans les forums, cherche, change le /dev/hdb ... par

none /media/cdrom0 supermount dev=/dev/hdd,fs=auto,ro,--,iocharset=utf8,umask=0 0 0

comme vu sur précedent mail; reboot, rien a faire toujours pareil;
Tente le demontage puis le mount -a, et bin, supermount il aime pas ça.
Bon, qu'a cela ne tienne, je reviens a l'ancienne config du fstab, et mount -a, bin, il dis rien ce coup ci mais ne monte pas le volume.

Recherche sur le web, forums, wiki..., tiens d'autres gros on eu ce genre de merde (http://forum.ubuntu-fr.org/viewtopic.php?id=41005); tien moi aussi je viens de faire une nouvelle mise a jour avec nouveau noyau, aller je tente le reboot sur l'ancien, toujours pareil.
J'tente le coup de l'USB pour voir ten, et allez zou; pareil ! marche po non plus l'USB maintenant, elle se monte plus toute seule !
Bon, je réfléchis, quesque j'ai récement changé sur ma becane ? merde, pas grand chose... j'ai rajouté un utilisateur, bon je l'enleve et reboot; marche toujours pas; rajouté ocatve, scilab et d'autre conneries comme cela... mais bon j'y crois pas trop; et tente mme pas la manip, il est tard et je viens de passer toute ma journée sur se ...tain de pb a la c... et ma copine et bien véner elle aussi !! mad   

Bon alors maintenant, j'aimerai bien savoir ce qui merde la bordel !!! mad
Parceque c bien gentil, mais ya pas moyen pour moi que d'aller remetre les pieds chez gros billou.
et alors vraiment surtout pas pour ecouter mes dicos tranquilou ou graver un CD !!! mad

Alors le premier qui trouve la soluce a mon &%%ùù$@à@ de pb,
promis je lui paye un coup, un splif, ou quoique ce soit que ça lui fait plais. hmm

chuss.

S.

Dernière modification par spokieszut (Le 20/08/2006, à 03:27)


HP Compaq nx6110 Notebook PC avec wifi Linksys 802.11b qui marche :)

Hors ligne

#2 Le 26/06/2006, à 17:49

raspouille

Re : [RESOLU... au calva!] pb cdrom, clé usb, carte son...

resalut.
/dev/hdb        /media/cdrom0   udf,iso9660 ro,user,noauto     0       0
en
/dev/hdb        /media/cdrom0   udf,iso9660 ro,user,auto     0       0

mes deux tiroirs bloquaient,ils ne plus.


Linux Mint Mate 17.3 GNU/Linux.

Hors ligne

#3 Le 27/06/2006, à 01:29

spokieszut

Re : [RESOLU... au calva!] pb cdrom, clé usb, carte son...

Salut raspouille ;

et merci pour ta rapide reponce.

bon, malheureusement, j'avais déjà essayé ça, en fait dès le début, et ça marche po. sad

J'ai aussi essayé de rebooté sur l'ancien kernel (2.6.15.23), et rien n"ont plus.

Je dois toujours monter mon lecteur à la main; et pareil pour la usb.
C comme si ça lisait pas le fstab... j'comprend pas. neutral

Quand je change de cd; pareil, ça garde le nom précedent quoiqu'il advienne; je peux démonter, remonter, redemonter, remonter, rafraichir... rien a faire; faut jusqu'à rebooter pour qu'il comprenne !

Et j'ai toujours pas trouvé de moyen de graver quoique ce soit.
Soit il me dis tout bêtement qu"il ny a pas de cd à l'interieur, ou bien qu'il n"est pas vierge.
J'ai essayé avec le graveur "made in ubuntu"; gnomebaker et bonfire; rien de rien.

hmm

je désespère...

Spok.

Dernière modification par spokieszut (Le 27/06/2006, à 02:32)


HP Compaq nx6110 Notebook PC avec wifi Linksys 802.11b qui marche :)

Hors ligne

#4 Le 27/06/2006, à 01:54

spokieszut

Re : [RESOLU... au calva!] pb cdrom, clé usb, carte son...

tiens; j'ai plus de son non plus maintenant... hmm

"Le contrôleur de volume ne trouve aucun élément et/ou périphérique à contrôler. Cela signifie que soit vous n'avez pas les bons greffons GStreamer installés, soit vous n'avez pas de carte son configurée.

Vous pouvez supprimer le contrôleur de volume du tableau de bord en faisant un clic droit sur l'icône du haut-parleur et en sélectionnant « Supprimer du tableau de bord » depuis le menu."

pourtant j'ai bien tout mes gstreamer... il me semble...
pis je suis bien content tiens de pouvoir suprimer mon icone ! smile
je me demande bien ce qui va partir en couille encore au prochain démarage... roll

S.

Dernière modification par spokieszut (Le 27/06/2006, à 02:27)


HP Compaq nx6110 Notebook PC avec wifi Linksys 802.11b qui marche :)

Hors ligne

#5 Le 27/06/2006, à 03:22

raspouille

Re : [RESOLU... au calva!] pb cdrom, clé usb, carte son...

pour voir faire un:
& dmesg


Linux Mint Mate 17.3 GNU/Linux.

Hors ligne

#6 Le 27/06/2006, à 22:41

spokieszut

Re : [RESOLU... au calva!] pb cdrom, clé usb, carte son...

seb@ubuspokie:~$ dmesg
[17179569.184000] Linux version 2.6.15-25-386 (buildd@terranova) (gcc version 4.0.3 (Ubuntu 4.0.3-1ubuntu5)) #1 PREEMPT Wed Jun 14 11:25:49 UTC 2006
[17179569.184000] BIOS-provided physical RAM map:
[17179569.184000]  BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[17179569.184000]  BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[17179569.184000]  BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[17179569.184000]  BIOS-e820: 0000000000100000 - 000000001f7d0000 (usable)
[17179569.184000]  BIOS-e820: 000000001f7d0000 - 000000001f7efc00 (reserved)
[17179569.184000]  BIOS-e820: 000000001f7efc00 - 000000001f7fb000 (ACPI NVS)
[17179569.184000]  BIOS-e820: 000000001f7fb000 - 000000001f800000 (reserved)
[17179569.184000]  BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
[17179569.184000]  BIOS-e820: 00000000fec00000 - 00000000fec02000 (reserved)
[17179569.184000]  BIOS-e820: 00000000fed20000 - 00000000fed9b000 (reserved)
[17179569.184000]  BIOS-e820: 00000000feda0000 - 00000000fedc0000 (reserved)
[17179569.184000]  BIOS-e820: 00000000ffb00000 - 00000000ffc00000 (reserved)
[17179569.184000]  BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
[17179569.184000] 0MB HIGHMEM available.
[17179569.184000] 503MB LOWMEM available.
[17179569.184000] On node 0 totalpages: 128976
[17179569.184000]   DMA zone: 4096 pages, LIFO batch:0
[17179569.184000]   DMA32 zone: 0 pages, LIFO batch:0
[17179569.184000]   Normal zone: 124880 pages, LIFO batch:31
[17179569.184000]   HighMem zone: 0 pages, LIFO batch:0
[17179569.184000] DMI 2.3 present.
[17179569.184000] ACPI: RSDP (v000 HP                                    ) @ 0x000fe270
[17179569.184000] ACPI: RSDT (v001 HP     099C     0x25020520 HP   0x00000001) @ 0x1f7efc84
[17179569.184000] ACPI: FADT (v002 HP     099C     0x00000002 HP   0x00000001) @ 0x1f7efc00
[17179569.184000] ACPI: MADT (v001 HP     099C     0x00000001 HP   0x00000001) @ 0x1f7efcb4
[17179569.184000] ACPI: MCFG (v001 HP     099C     0x00000001 HP   0x00000001) @ 0x1f7efd10
[17179569.184000] ACPI: DSDT (v001 HP       DAU00  0x00010000 MSFT 0x0100000e) @ 0x00000000
[17179569.184000] ACPI: PM-Timer IO Port: 0x1008
[17179569.184000] ACPI: Local APIC address 0xfec01000
[17179569.184000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[17179569.184000] Processor #0 6:13 APIC version 20
[17179569.184000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[17179569.184000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[17179569.184000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23[17179569.184000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[17179569.184000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[17179569.184000] ACPI: IRQ0 used by override.
[17179569.184000] ACPI: IRQ2 used by override.
[17179569.184000] ACPI: IRQ9 used by override.
[17179569.184000] Enabling APIC mode:  Flat.  Using 1 I/O APICs
[17179569.184000] Using ACPI (MADT) for SMP configuration information
[17179569.184000] Allocating PCI resources starting at 20000000 (gap: 1f800000:c0800000)
[17179569.184000] Built 1 zonelists
[17179569.184000] Kernel command line: root=/dev/hda7 ro quiet splash
[17179569.184000] mapped APIC to ffffd000 (fec01000)
[17179569.184000] mapped IOAPIC to ffffc000 (fec00000)
[17179569.184000] Initializing CPU#0
[17179569.184000] PID hash table entries: 2048 (order: 11, 32768 bytes)
[17179569.184000] Detected 1400.368 MHz processor.
[17179569.184000] Using pmtmr for high-res timesource
[17179569.184000] Console: colour VGA+ 80x25
[17179572.968000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[17179572.968000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)[17179572.984000] Memory: 501044k/515904k available (1976k kernel code, 14348k reserved, 606k data, 288k init, 0k highmem)
[17179572.984000] Checking if this processor honours the WP bit even in supervisor mode... Ok.
[17179573.064000] Calibrating delay using timer specific routine.. 2804.60 BogoMIPS (lpj=5609200)
[17179573.064000] Security Framework v1.0.0 initialized
[17179573.064000] SELinux:  Disabled at boot.
[17179573.064000] Mount-cache hash table entries: 512
[17179573.064000] CPU: After generic identify, caps: afe9fbbf 00000000 00000000 00000000 00000000 00000000 00000000
[17179573.064000] CPU: After vendor identify, caps: afe9fbbf 00000000 00000000 00000000 00000000 00000000 00000000
[17179573.064000] CPU: L1 I cache: 32K, L1 D cache: 32K
[17179573.064000] CPU: L2 cache: 1024K
[17179573.064000] CPU: After all inits, caps: afe9fbbf 00000000 00000000 00000040 00000000 00000000 00000000
[17179573.064000] mtrr: v2.0 (20020519)
[17179573.064000] CPU: Intel(R) Celeron(R) M processor         1.40GHz stepping 06
[17179573.064000] Enabling fast FPU save and restore... done.
[17179573.064000] Enabling unmasked SIMD FPU exception support... done.
[17179573.064000] Checking 'hlt' instruction... OK.
[17179573.080000] checking if image is initramfs... it is
[17179573.832000] Freeing initrd memory: 6613k freed
[17179573.840000] ACPI: Looking for DSDT ... not found!
[17179573.912000] ENABLING IO-APIC IRQs
[17179573.912000] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
[17179574.056000] HP Laptop series board detected. Selecting BIOS-method for reboots.
[17179574.056000] NET: Registered protocol family 16
[17179574.056000] EISA bus registered
[17179574.056000] ACPI: bus type pci registered
[17179574.056000] PCI: PCI BIOS revision 2.10 entry at 0xf0322, last bus=3
[17179574.056000] PCI: Using MMCONFIG
[17179574.056000] ACPI: Subsystem revision 20051216
[17179574.080000] ACPI: Interpreter enabled
[17179574.080000] ACPI: Using IOAPIC for interrupt routing
[17179574.080000] ACPI: PCI Root Bridge [C002] (0000:00)
[17179574.080000] PCI: Probing PCI hardware (bus 00)
[17179574.080000] ACPI: Assume root bridge [\_SB_.C002] bus is 0
[17179574.088000] Boot video device is 0000:00:02.0
[17179574.088000] PCI quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO
[17179574.088000] PCI quirk: region 1100-113f claimed by ICH6 GPIO
[17179574.088000] PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1
[17179574.088000] PCI: Transparent bridge - 0000:00:1e.0
[17179574.088000] ACPI: PCI Interrupt Routing Table [\_SB_.C002._PRT]
[17179574.128000] ACPI: PCI Interrupt Routing Table [\_SB_.C002.C067._PRT]
[17179574.128000] ACPI: Embedded Controller [C004] (gpe 16) interrupt mode.
[17179574.136000] ACPI: Power Resource [C1BD] (on)
[17179574.140000] ACPI: PCI Interrupt Link [C0D7] (IRQs 10 *11)
[17179574.144000] ACPI: PCI Interrupt Link [C0D8] (IRQs *10 11)
[17179574.144000] ACPI: PCI Interrupt Link [C0D9] (IRQs *10 11)
[17179574.144000] ACPI: PCI Interrupt Link [C0DA] (IRQs *10 11)
[17179574.144000] ACPI: PCI Interrupt Link [C0ED] (IRQs *10 11)
[17179574.144000] ACPI: PCI Interrupt Link [C0EE] (IRQs 10 11) *0, disabled.
[17179574.144000] ACPI: PCI Interrupt Link [C0EF] (IRQs *10 11)
[17179574.148000] ACPI: PCI Interrupt Link [C0F0] (IRQs 10 11) *0, disabled.
[17179574.148000] ACPI: Power Resource [C250] (off)
[17179574.148000] ACPI: Power Resource [C251] (off)
[17179574.148000] ACPI: Power Resource [C252] (off)
[17179574.148000] ACPI: Power Resource [C253] (off)
[17179574.148000] Linux Plug and Play Support v0.97 (c) Adam Belay
[17179574.148000] pnp: PnP ACPI init
[17179574.156000] pnp: PnP ACPI: found 12 devices
[17179574.156000] PnPBIOS: Disabled by ACPI PNP
[17179574.156000] PCI: Using ACPI for IRQ routing
[17179574.156000] PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
[17179574.204000] pnp: 00:09: ioport range 0x4d0-0x4d1 has been reserved
[17179574.204000] pnp: 00:09: ioport range 0x1000-0x107f could not be reserved
[17179574.204000] pnp: 00:09: ioport range 0x1100-0x113f has been reserved
[17179574.204000] pnp: 00:09: ioport range 0x1200-0x121f has been reserved
[17179574.204000] PCI: Ignore bogus resource 6 [0:0] of 0000:00:02.0
[17179574.204000] PCI: Bus 3, cardbus bridge: 0000:02:06.0
[17179574.204000]   IO window: 00003000-000030ff
[17179574.204000]   IO window: 00003400-000034ff
[17179574.204000]   PREFETCH window: 20000000-21ffffff
[17179574.204000]   MEM window: 22000000-23ffffff
[17179574.204000] PCI: Bridge: 0000:00:1e.0
[17179574.204000]   IO window: 3000-3fff
[17179574.204000]   MEM window: d0000000-d03fffff
[17179574.204000]   PREFETCH window: 20000000-21ffffff
[17179574.204000] PCI: Setting latency timer of device 0000:00:1e.0 to 64
[17179574.204000] ACPI: PCI Interrupt 0000:02:06.0[A] -> GSI 18 (level, low) -> IRQ 169
[17179574.204000] audit: initializing netlink socket (disabled)
[17179574.204000] audit(1151443323.204:1): initialized
[17179574.204000] VFS: Disk quotas dquot_6.5.1
[17179574.204000] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[17179574.204000] Initializing Cryptographic API
[17179574.204000] io scheduler noop registered
[17179574.204000] io scheduler anticipatory registered
[17179574.204000] io scheduler deadline registered
[17179574.204000] io scheduler cfq registered
[17179574.204000] isapnp: Scanning for PnP cards...
[17179574.560000] isapnp: No Plug & Play device found
[17179574.576000] PNP: PS/2 Controller [PNP0303:C1BA,PNP0f13:C1BB] at 0x60,0x64 irq 1,12
[17179574.576000] i8042.c: Detected active multiplexing controller, rev 1.1.
[17179574.580000] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[17179574.580000] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[17179574.580000] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[17179574.580000] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[17179574.580000] serio: i8042 KBD port at 0x60,0x64 irq 1
[17179574.580000] Serial: 8250/16550 driver $Revision: 1.90 $ 48 ports, IRQ sharing enabled
[17179574.580000] ACPI: PCI Interrupt 0000:00:1e.3[b] -> GSI 22 (level, low) -> IRQ 177
[17179574.580000] ACPI: PCI interrupt for device 0000:00:1e.3 disabled
[17179574.580000] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[17179574.580000] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[17179574.580000] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[17179574.584000] mice: PS/2 mouse device common for all mice
[17179574.584000] EISA: Probing bus 0 at eisa.0
[17179574.584000] Cannot allocate resource for EISA slot 1
[17179574.584000] Cannot allocate resource for EISA slot 2
[17179574.584000] Cannot allocate resource for EISA slot 3
[17179574.584000] Cannot allocate resource for EISA slot 7
[17179574.584000] EISA: Detected 0 cards.
[17179574.584000] NET: Registered protocol family 2
[17179574.616000] input: AT Translated Set 2 keyboard as /class/input/input0
[17179574.620000] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
[17179574.620000] TCP established hash table entries: 16384 (order: 4, 65536 bytes)
[17179574.620000] TCP bind hash table entries: 16384 (order: 4, 65536 bytes)
[17179574.620000] TCP: Hash tables configured (established 16384 bind 16384)
[17179574.620000] TCP reno registered
[17179574.620000] TCP bic registered
[17179574.620000] NET: Registered protocol family 1
[17179574.620000] NET: Registered protocol family 8
[17179574.620000] NET: Registered protocol family 20
[17179574.620000] Using IPI Shortcut mode
[17179574.620000] ACPI wakeup devices:
[17179574.620000] C067 C0BA C0C1 C0C2 C0C3 C0C4
[17179574.620000] ACPI: (supports S0 S3 S4 S5)
[17179574.620000] Freeing unused kernel memory: 288k freed
[17179574.668000] vga16fb: initializing
[17179574.668000] vga16fb: mapped to 0xc00a0000
[17179574.800000] Console: switching to colour frame buffer device 80x25
[17179574.800000] fb0: VGA16 VGA frame buffer device
[17179575.868000] Capability LSM initialized
[17179575.984000] ACPI: Fan [C254] (off)
[17179575.984000] ACPI: Fan [C255] (off)
[17179575.984000] ACPI: Fan [C256] (off)
[17179575.984000] ACPI: Fan [C257] (off)
[17179575.988000] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
[17179575.988000] ACPI: Processor [C000] (supports 8 throttling states)
[17179576.008000] ACPI: Thermal Zone [TZ1] (39 C)
[17179576.024000] ACPI: Thermal Zone [TZ2] (29 C)
[17179576.032000] ACPI: Thermal Zone [TZ3] (16 C)
[17179576.464000] ICH6: IDE controller at PCI slot 0000:00:1f.1
[17179576.464000] ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 16 (level, low) -> IRQ 185
[17179576.464000] ICH6: chipset revision 3
[17179576.464000] ICH6: not 100% native mode: will probe irqs later
[17179576.464000]     ide0: BM-DMA at 0x2580-0x2587, BIOS settings: hda:DMA, hdb:DMA
[17179576.464000] Probing IDE interface ide0...
[17179576.752000] hda: TOSHIBA MK4026GAX, ATA DISK drive
[17179577.200000] hdb: SONY CD-RW/DVD-ROM CRX835E, ATAPI CD/DVD-ROM drive
[17179577.256000] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[17179577.308000] hda: max request size: 128KiB
[17179577.316000] hda: 78140160 sectors (40007 MB), CHS=65535/16/63, UDMA(100)
[17179577.316000] hda: cache flushes supported
[17179577.316000]  hda: hda1 hda2 < hda5 hda6 hda7 >
[17179577.368000] hdb: ATAPI 47X DVD-ROM CD-R/RW drive, 2048kB Cache, (U)DMA
[17179577.368000] Uniform CD-ROM driver Revision: 3.20
[17179577.728000] usbcore: registered new driver usbfs
[17179577.728000] usbcore: registered new driver hub
[17179577.732000] USB Universal Host Controller Interface driver v2.3
[17179577.732000] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 193
[17179577.732000] PCI: Setting latency timer of device 0000:00:1d.0 to 64
[17179577.732000] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[17179577.732000] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
[17179577.732000] uhci_hcd 0000:00:1d.0: irq 193, io base 0x00002000
[17179577.732000] hub 1-0:1.0: USB hub found
[17179577.732000] hub 1-0:1.0: 2 ports detected
[17179577.812000] ieee1394: Initialized config rom entry `ip1394'
[17179577.836000] ACPI: PCI Interrupt 0000:00:1d.1[b] -> GSI 17 (level, low) -> IRQ 201
[17179577.836000] PCI: Setting latency timer of device 0000:00:1d.1 to 64
[17179577.836000] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[17179577.836000] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
[17179577.836000] uhci_hcd 0000:00:1d.1: irq 201, io base 0x00002020
[17179577.836000] hub 2-0:1.0: USB hub found
[17179577.836000] hub 2-0:1.0: 2 ports detected
[17179577.940000] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 169
[17179577.940000] PCI: Setting latency timer of device 0000:00:1d.2 to 64
[17179577.940000] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[17179577.940000] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
[17179577.940000] uhci_hcd 0000:00:1d.2: irq 169, io base 0x00002040
[17179577.940000] hub 3-0:1.0: USB hub found
[17179577.940000] hub 3-0:1.0: 2 ports detected
[17179578.044000] ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 19 (level, low) -> IRQ 209
[17179578.044000] PCI: Setting latency timer of device 0000:00:1d.3 to 64
[17179578.044000] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[17179578.044000] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4
[17179578.044000] uhci_hcd 0000:00:1d.3: irq 209, io base 0x00002060
[17179578.044000] hub 4-0:1.0: USB hub found
[17179578.044000] hub 4-0:1.0: 2 ports detected
[17179578.076000] usb 1-1: new full speed USB device using uhci_hcd and address 2
[17179578.148000] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 193
[17179578.148000] PCI: Setting latency timer of device 0000:00:1d.7 to 64
[17179578.148000] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[17179578.148000] ehci_hcd 0000:00:1d.7: debug port 1
[17179578.148000] PCI: cache line size of 32 is not supported by device 0000:00:1d.7
[17179578.148000] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5
[17179578.148000] ehci_hcd 0000:00:1d.7: irq 193, io mem 0xd0580000
[17179578.152000] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[17179578.152000] hub 5-0:1.0: USB hub found
[17179578.152000] hub 5-0:1.0: 8 ports detected
[17179578.256000] ohci1394: $Rev: 1313 $ Ben Collins <bcollins@debian.org>
[17179578.256000] ACPI: PCI Interrupt 0000:02:06.2[C] -> GSI 22 (level, low) -> IRQ 177
[17179578.304000] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[177]  MMIO=[d0001000-d00017ff]  Max Packet=[2048]
[17179578.340000] Probing IDE interface ide1...
[17179578.600000] usb 1-1: device not accepting address 2, error -71
[17179579.024000] usb 5-1: new high speed USB device using ehci_hcd and address 2
[17179579.036000] Attempting manual resume
[17179579.072000] EXT3-fs: mounted filesystem with ordered data mode.
[17179579.080000] kjournald starting.  Commit interval 5 seconds
[17179579.576000] ieee1394: Host added: ID:BUS[0-00:1023]  GUID[718b500029f929a6]
[17179579.588000] usb 1-2: new low speed USB device using uhci_hcd and address 4[17179593.524000] Linux agpgart interface v0.101 (c) Dave Jones
[17179593.568000] agpgart: Detected an Intel 915GM Chipset.
[17179593.568000] agpgart: Detected 7932K stolen memory.
[17179593.588000] agpgart: AGP aperture is 256M @ 0xc0000000
[17179594.164000] hw_random: RNG not detected
[17179594.304000] ACPI: PCI Interrupt 0000:00:1e.2[A] -> GSI 21 (level, low) -> IRQ 217
[17179594.304000] PCI: Setting latency timer of device 0000:00:1e.2 to 64
[17179594.328000] Real Time Clock Driver v1.12
[17179594.528000] input: PC Speaker as /class/input/input1
[17179594.828000] Synaptics Touchpad, model: 1, fw: 6.2, id: 0x25a0b1, caps: 0xa04793/0x300000
[17179594.828000] serio: Synaptics pass-through port at isa0060/serio4/input0
[17179594.868000] input: SynPS/2 Synaptics TouchPad as /class/input/input2
[17179595.024000] SCSI subsystem initialized
[17179595.088000] Initializing USB Mass Storage driver...
[17179595.088000] scsi0 : SCSI emulation for USB Mass Storage devices
[17179595.088000] usb-storage: device found at 2
[17179595.088000] usb-storage: waiting for device to settle before scanning
[17179595.088000] usbcore: registered new driver usb-storage
[17179595.088000] USB Mass Storage support registered.
[17179595.124000] intel8x0_measure_ac97_clock: measured 55485 usecs
[17179595.124000] intel8x0: clocking to 48000
[17179595.132000] ACPI: PCI Interrupt 0000:02:06.0[A] -> GSI 18 (level, low) -> IRQ 169
[17179595.132000] Yenta: CardBus bridge found at 0000:02:06.0 [103c:099c]
[17179595.132000] Yenta: Enabling burst memory read transactions
[17179595.132000] Yenta: Using INTVAL to route CSC interrupts to PCI
[17179595.132000] Yenta: Routing CardBus interrupts to PCI
[17179595.132000] Yenta TI: socket 0000:02:06.0, mfunc 0x01aa1b22, devctl 0x64
[17179595.364000] Yenta: ISA IRQ mask 0x0cf8, PCI irq 169
[17179595.364000] Socket status: 30000820
[17179595.364000] Yenta: Raising subordinate bus# of parent bus (#02) from #03 to #06
[17179595.364000] pcmcia: parent PCI bridge I/O window: 0x3000 - 0x3fff
[17179595.364000] cs: IO port probe 0x3000-0x3fff: clean.
[17179595.364000] pcmcia: parent PCI bridge Memory window: 0xd0000000 - 0xd03fffff
[17179595.364000] pcmcia: parent PCI bridge Memory window: 0x20000000 - 0x21ffffff
[17179595.368000] usbcore: registered new driver hiddev
[17179595.388000] input: Logitech USB-PS/2 Optical Mouse as /class/input/input3
[17179595.388000] input: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:1d.0-2
[17179595.388000] usbcore: registered new driver usbhid
[17179595.388000] drivers/usb/input/hid-core.c: v2.6:USB HID core driver
[17179595.400000] b44.c:v0.97 (Nov 30, 2005)
[17179595.400000] ACPI: PCI Interrupt 0000:02:0e.0[A] -> GSI 16 (level, low) -> IRQ 185
[17179595.404000] eth0: Broadcom 4400 10/100BaseT Ethernet 00:14:38:05:36:59
[17179595.436000] ts: Compaq touchscreen protocol output
[17179596.000000] pccard: CardBus card inserted into slot 0
[17179596.124000] cs: IO port probe 0x100-0x4ff: clean.
[17179596.128000] cs: IO port probe 0xc00-0xcf7: clean.
[17179596.128000] cs: IO port probe 0xa00-0xaff: clean.
[17179596.144000] rtl_ieee80211_crypt: registered algorithm 'NULL'
[17179596.144000] rtl_ieee80211_crypt: registered algorithm 'TKIP'
[17179596.144000] rtl_ieee80211_crypt: registered algorithm 'WEP'
[17179596.144000] rtl_ieee80211_crypt: registered algorithm 'CCMP'
[17179596.180000]
[17179596.180000] Linux kernel driver for RTL8180 / RTL8185 based WLAN cards
[17179596.180000] Copyright (c) 2004-2005, Andrea Merello
[17179596.180000] rtl8180: Initializing module
[17179596.180000] rtl8180: Wireless extensions version 19
[17179596.180000] rtl8180: Initializing proc filesystem
[17179596.180000] rtl8180: Configuring chip resources
[17179596.180000] PCI: Enabling device 0000:03:00.0 (0000 -> 0003)
[17179596.180000] ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 18 (level, low) -> IRQ 169
[17179596.180000] PCI: Setting latency timer of device 0000:03:00.0 to 64
[17179596.180000] rtl8180: Memory mapped space @ 0x22000000
[17179596.180000] rtl8180: MAC controller is a RTL8180 (v. F)
[17179596.180000] rtl8180: This is a CARDBUS NIC
[17179596.180000] rtl8180: Reported EEPROM chip is a 93c56 (2Kbit)
[17179596.188000] rtl8180: Card MAC address is 00:13:07:1z:rf:g3
[17179596.196000] rtl8180: EEPROM version 102
[17179596.200000] rtl8180: RfParam: 4
[17179596.200000] rtl8180: WW:Card reports RF frontend by MAXIM.
[17179596.200000] rtl8180: WW:This driver has EXPERIMENTAL support for this chipset.
[17179596.200000] rtl8180: WW:use it with care and at your own risk and
[17179596.200000] rtl8180: WW:**PLEASE** REPORT SUCCESS/INSUCCESS TO andreamrl@tiscali.it
[17179596.200000] rtl8180: Energy threshold: a
[17179596.200000] rtl8180: PAPE from CONFIG2: 2
[17179596.200000] rtl8180: Antenna A is default antenna
[17179596.200000] rtl8180: Antenna diversity is enabled
[17179596.200000] rtl8180: Carrier sense 1
[17179596.200000] rtl8180: 40-bit WEP is NOT supported in hardware
[17179596.200000] rtl8180: 104-bit WEP is NOT supported in hardware
[17179596.200000] rtl8180: IRQ 169
[17179596.200000] rtl8180: Driver probe completed
[17179596.200000]
[17179596.268000] rtl8180: Bringing up iface
[17179596.476000] rtl8180: Card successfully reset
[17179597.108000] lp: driver loaded but no devices found
[17179597.180000] sbp2: $Rev: 1306 $ Ben Collins <bcollins@debian.org>
[17179597.180000] ieee1394: sbp2: Driver forced to serialize I/O (serialize_io=1)
[17179597.180000] ieee1394: sbp2: Try serialize_io=0 for better performance
[17179597.240000] ndiswrapper version 1.8 loaded (preempt=yes,smp=no)
[17179597.328000] Adding 746980k swap on /dev/hda6.  Priority:-1 extents:1 across:746980k
[17179597.448000] EXT3 FS on hda7, internal journal
[17179597.676000] md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
[17179597.676000] md: bitmap version 4.39
[17179598.268000] device-mapper: 4.4.0-ioctl (2005-01-12) initialised: dm-devel@redhat.com
[17179599.604000] UDF-fs: No VRS found
[17179599.704000] ISO 9660 Extensions: Microsoft Joliet Level 3
[17179599.732000] ISOFS: changing to secondary root
[17179599.824000] FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
[17179600.088000]   Vendor: Lexar     Model: JumpDrive         Rev: 1.00
[17179600.088000]   Type:   Direct-Access                      ANSI SCSI revision: 01 CCS
[17179600.096000] usb-storage: device scan complete
[17179600.208000] Driver 'sd' needs updating - please use bus_type methods
[17179600.212000] SCSI device sda: 503808 512-byte hdwr sectors (258 MB)
[17179600.212000] sda: Write Protect is off
[17179600.212000] sda: Mode Sense: 23 00 00 00
[17179600.212000] sda: assuming drive cache: write through
[17179600.216000] SCSI device sda: 503808 512-byte hdwr sectors (258 MB)
[17179600.220000] sda: Write Protect is off
[17179600.220000] sda: Mode Sense: 23 00 00 00
[17179600.220000] sda: assuming drive cache: write through
[17179600.220000]  sda: sda1
[17179600.220000] sd 0:0:0:0: Attached scsi removable disk sda
[17179600.232000] sd 0:0:0:0: Attached scsi generic sg0 type 0
[17179601.272000] ACPI: AC Adapter [C16B] (on-line)
[17179601.272000] ACPI: Battery Slot [C16D] (battery absent)
[17179601.272000] ACPI: Battery Slot [C16C] (battery absent)
[17179601.364000] ACPI: Power Button (FF) [PWRF]
[17179601.364000] ACPI: Sleep Button (CM) [C1E0]
[17179601.364000] ACPI: Lid Switch [C1E1]
[17179601.464000] ibm_acpi: ec object not found
[17179601.492000] pcc_acpi: loading...
[17179601.536000] wmi_add device=df62c800
[17179601.536000] calling WQBA
[17179601.584000] ACPI: Video Device [C054] (multi-head: yes  rom: no  post: no)[17179608.540000] ppdev: user-space parallel port driver
[17179609.668000] [drm] Initialized drm 1.0.1 20051102
[17179609.672000] ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 185
[17179609.672000] [drm] Initialized i915 1.4.0 20060119 on minor 0
[17179609.796000] Linking with spokconnect
[17179609.812000] Associated successfully
[17179609.812000] Using B rates
[17179611.060000] apm: BIOS not found.
[17179611.452000] ip_tables: (C) 2000-2002 Netfilter core team
[17179611.524000] Netfilter messages via NETLINK v1.32.
[17179611.544000] ip_conntrack version 2.4 (4030 buckets, 32240 max) - 232 bytes per conntrack
[17179612.452000] NET: Registered protocol family 10
[17179612.452000] lo: Disabled Privacy Extensions
[17179612.452000] IPv6 over IPv4 tunneling driver
[17179612.476000] Bluetooth: Core ver 2.8
[17179612.476000] NET: Registered protocol family 31
[17179612.476000] Bluetooth: HCI device and connection manager initialized
[17179612.476000] Bluetooth: HCI socket layer initialized
[17179612.492000] Bluetooth: L2CAP ver 2.8
[17179612.492000] Bluetooth: L2CAP socket layer initialized
[17179612.528000] Bluetooth: RFCOMM socket layer initialized
[17179612.528000] Bluetooth: RFCOMM TTY layer initialized
[17179612.528000] Bluetooth: RFCOMM ver 1.7
[17179622.944000] wlan0: no IPv6 routers present

interressant; et tiens c marrant c la comande que j'avais maté hier soir avant de me coucher dans mon bouquin; ...
je m'sens tout de meme un peu un poil la maintenant:. wink

Dernière modification par spokieszut (Le 27/06/2006, à 22:58)


HP Compaq nx6110 Notebook PC avec wifi Linksys 802.11b qui marche :)

Hors ligne

#7 Le 27/06/2006, à 23:03

spokieszut

Re : [RESOLU... au calva!] pb cdrom, clé usb, carte son...

marrant il a l'air de détecter ma %.&"'& de usb, il lui donne meme son pti nom !
mais impossible de la monter... hmm


HP Compaq nx6110 Notebook PC avec wifi Linksys 802.11b qui marche :)

Hors ligne

#8 Le 28/06/2006, à 02:53

raspouille

Re : [RESOLU... au calva!] pb cdrom, clé usb, carte son...

apm: BIOS not found.
probleme reconnaissance materiel,boot trop long.
usb 1-1: device not accepting address 2, error -71
ubuntu ne reconnait pas l'usb.
Probing IDE interface ide1...
probleme de boot sur le disque dur.
apparement,il y aurai un probleme de boot du disque dur.
pour le son c'est pareil.
sous console
& mount
& lshal

cool  de la, a retourner sous breezy,moi j'ai upgrade une dapper vers edgy avec un kernel 2.6.17-2 mais probleme avec la 3D.
hmm   si sa fonctionnait bien sous breezy !!!.pourquoi se prendre la tete.
je pense a un mauvais formatage du hd !!!

Dernière modification par raspouille (Le 28/06/2006, à 13:37)


Linux Mint Mate 17.3 GNU/Linux.

Hors ligne

#9 Le 29/06/2006, à 00:05

spokieszut

Re : [RESOLU... au calva!] pb cdrom, clé usb, carte son...

seb@ubuspokie:~$ mount
/dev/hda7 on / type ext3 (rw,errors=remount-ro)
proc on /proc type proc (rw)
/sys on /sys type sysfs (rw)
varrun on /var/run type tmpfs (rw)
varlock on /var/lock type tmpfs (rw)
procbususb on /proc/bus/usb type usbfs (rw)
udev on /dev type tmpfs (rw)
devpts on /dev/pts type devpts (rw,gid=5,mode=620)
devshm on /dev/shm type tmpfs (rw)
lrm on /lib/modules/2.6.15-25-386/volatile type tmpfs (rw)
/dev/hdb on /media/cdrom0 type iso9660 (ro,noexec,nosuid,nodev)
/dev/hda5 on /media/datos type vfat (rw,noexec,nosuid,nodev,gid=100,uid=1000,umask=002,iocharset=utf8,codepage=850)


HP Compaq nx6110 Notebook PC avec wifi Linksys 802.11b qui marche :)

Hors ligne

#10 Le 29/06/2006, à 00:07

spokieszut

Re : [RESOLU... au calva!] pb cdrom, clé usb, carte son...

seb@ubuspokie:~$ lshal
Dumping 106 device(s) from the Global Device List:
-------------------------------------------------
udi = '/org/freedesktop/Hal/devices/computer'
  info.callouts.add = {'hal-system-storage-cleanup-mountpoints'} (string list)
  storage.policy.default.mount_option.exec = true  (bool)
  org.freedesktop.Hal.Device.SystemPowerManagement.method_execpaths = {'hal-system-power-suspend', 'hal-system-power-hibernate', 'hal-system-power-shutdown', 'hal-system-power-reboot', 'hal-system-power-set-power-save'} (string list)
  org.freedesktop.Hal.Device.SystemPowerManagement.method_signatures = {'i', '', '', '', 'b'} (string list)
  org.freedesktop.Hal.Device.SystemPowerManagement.method_names = {'Suspend', 'Hibernate', 'Shutdown', 'Reboot', 'SetPowerSave'} (string list)
  info.interfaces = {'org.freedesktop.Hal.Device.SystemPowerManagement'} (string list)
  info.addons = {'hald-addon-acpi'} (string list)
  system.product = 'HP Compaq nx6110 (PY435ES#ABF) F.03'  (string)
  system.vendor = 'Hewlett-Packard'  (string)
  smbios.chassis.type = 'Notebook'  (string)
  smbios.chassis.manufacturer = 'Hewlett-Packard'  (string)
  smbios.system.uuid = 'A69E1FD4-C662-DA11-3380-6D990A29F929'  (string)
  smbios.system.serial = 'CNU5201KKY'  (string)
  smbios.system.version = 'F.03'  (string)
  smbios.bios.vendor = 'Hewlett-Packard'  (string)
  power_management.can_suspend_to_disk = true  (bool)
  power_management.can_suspend_to_ram = true  (bool)
  power_management.acpi.linux.version = '20051216'  (string)
  power_management.type = 'acpi'  (string)
  system.formfactor = 'laptop'  (string)
  system.kernel.machine = 'i686'  (string)
  system.kernel.version = '2.6.15-25-386'  (string)
  system.kernel.name = 'Linux'  (string)
  info.udi = '/org/freedesktop/Hal/devices/computer'  (string)
  info.product = 'Computer'  (string)
  linux.sysfs_path_device = '(none)'  (string)
  info.bus = 'unknown'  (string)

udi = '/org/freedesktop/Hal/devices/acpi_C1E0'
  info.udi = '/org/freedesktop/Hal/devices/acpi_C1E0'  (string)
  linux.hotplug_type = 4  (0x4)  (int)
  button.has_state = false  (bool)
  info.capabilities = {'button'} (string list)
  info.category = 'button'  (string)
  info.product = 'Sleep Button'  (string)
  button.type = 'sleep'  (string)
  info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
  linux.acpi_type = 10  (0xa)  (int)
  linux.acpi_path = '/proc/acpi/button/sleep/C1E0'  (string)

udi = '/org/freedesktop/Hal/devices/acpi_PWRF'
  info.udi = '/org/freedesktop/Hal/devices/acpi_PWRF'  (string)
  linux.hotplug_type = 4  (0x4)  (int)
  button.has_state = false  (bool)
  info.capabilities = {'button'} (string list)
  info.category = 'button'  (string)
  info.product = 'Power Button'  (string)
  button.type = 'power'  (string)
  info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
  linux.acpi_type = 10  (0xa)  (int)
  linux.acpi_path = '/proc/acpi/button/power/PWRF'  (string)

udi = '/org/freedesktop/Hal/devices/acpi_C1E1'
  info.udi = '/org/freedesktop/Hal/devices/acpi_C1E1'  (string)
  linux.hotplug_type = 4  (0x4)  (int)
  button.has_state = true  (bool)
  button.state.value = false  (bool)
  info.capabilities = {'button'} (string list)
  info.category = 'button'  (string)
  info.product = 'Lid Switch'  (string)
  button.type = 'lid'  (string)
  info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
  linux.acpi_type = 10  (0xa)  (int)
  linux.acpi_path = '/proc/acpi/button/lid/C1E1'  (string)

udi = '/org/freedesktop/Hal/devices/acpi_C16B'
  info.udi = '/org/freedesktop/Hal/devices/acpi_C16B'  (string)
  linux.hotplug_type = 4  (0x4)  (int)
  ac_adapter.present = true  (bool)
  info.capabilities = {'ac_adapter'} (string list)
  info.category = 'ac_adapter'  (string)
  info.product = 'AC Adapter'  (string)
  info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
  linux.acpi_type = 3  (0x3)  (int)
  linux.acpi_path = '/proc/acpi/ac_adapter/C16B'  (string)


HP Compaq nx6110 Notebook PC avec wifi Linksys 802.11b qui marche :)

Hors ligne

#11 Le 29/06/2006, à 00:08

spokieszut

Re : [RESOLU... au calva!] pb cdrom, clé usb, carte son...

udi = '/org/freedesktop/Hal/devices/acpi_C254'
  info.udi = '/org/freedesktop/Hal/devices/acpi_C254'  (string)
  linux.hotplug_type = 4  (0x4)  (int)
  fan.enabled = false  (bool)
  info.capabilities = {'fan'} (string list)
  info.category = 'fan'  (string)
  info.product = 'Fan'  (string)
  info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
  linux.acpi_type = 2  (0x2)  (int)
  linux.acpi_path = '/proc/acpi/fan/C254'  (string)

udi = '/org/freedesktop/Hal/devices/acpi_C255'
  info.udi = '/org/freedesktop/Hal/devices/acpi_C255'  (string)
  linux.hotplug_type = 4  (0x4)  (int)
  fan.enabled = true  (bool)
  info.capabilities = {'fan'} (string list)
  info.category = 'fan'  (string)
  info.product = 'Fan'  (string)
  info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
  linux.acpi_type = 2  (0x2)  (int)
  linux.acpi_path = '/proc/acpi/fan/C255'  (string)

udi = '/org/freedesktop/Hal/devices/acpi_C256'
  info.udi = '/org/freedesktop/Hal/devices/acpi_C256'  (string)
  linux.hotplug_type = 4  (0x4)  (int)
  fan.enabled = true  (bool)
  info.capabilities = {'fan'} (string list)
  info.category = 'fan'  (string)
  info.product = 'Fan'  (string)
  info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
  linux.acpi_type = 2  (0x2)  (int)
  linux.acpi_path = '/proc/acpi/fan/C256'  (string)

udi = '/org/freedesktop/Hal/devices/acpi_C257'
  info.udi = '/org/freedesktop/Hal/devices/acpi_C257'  (string)
  linux.hotplug_type = 4  (0x4)  (int)
  fan.enabled = true  (bool)
  info.capabilities = {'fan'} (string list)
  info.category = 'fan'  (string)
  info.product = 'Fan'  (string)
  info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
  linux.acpi_type = 2  (0x2)  (int)
  linux.acpi_path = '/proc/acpi/fan/C257'  (string)

udi = '/org/freedesktop/Hal/devices/acpi_C000'
  info.udi = '/org/freedesktop/Hal/devices/acpi_C000'  (string)
  linux.hotplug_type = 4  (0x4)  (int)
  processor.can_throttle = true  (bool)
  processor.number = 0  (0x0)  (int)
  info.capabilities = {'processor'} (string list)
  info.category = 'processor'  (string)
  info.product = 'Processor'  (string)
  info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
  linux.acpi_type = 1  (0x1)  (int)
  linux.acpi_path = '/proc/acpi/processor/C000'  (string)


HP Compaq nx6110 Notebook PC avec wifi Linksys 802.11b qui marche :)

Hors ligne

#12 Le 29/06/2006, à 00:09

spokieszut

Re : [RESOLU... au calva!] pb cdrom, clé usb, carte son...

udi = '/org/freedesktop/Hal/devices/acpi_C16D'
  info.udi = '/org/freedesktop/Hal/devices/acpi_C16D'  (string)
  linux.hotplug_type = 4  (0x4)  (int)
  battery.present = false  (bool)
  info.capabilities = {'battery'} (string list)
  info.category = 'battery'  (string)
  battery.type = 'primary'  (string)
  info.product = 'Battery Bay'  (string)
  info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
  linux.acpi_type = 0  (0x0)  (int)
  linux.acpi_path = '/proc/acpi/battery/C16D'  (string)

udi = '/org/freedesktop/Hal/devices/acpi_C16C'
  info.udi = '/org/freedesktop/Hal/devices/acpi_C16C'  (string)
  linux.hotplug_type = 4  (0x4)  (int)
  battery.present = false  (bool)
  info.capabilities = {'battery'} (string list)
  info.category = 'battery'  (string)
  battery.type = 'primary'  (string)
  info.product = 'Battery Bay'  (string)
  info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
  linux.acpi_type = 0  (0x0)  (int)
  linux.acpi_path = '/proc/acpi/battery/C16C'  (string)

udi = '/org/freedesktop/Hal/devices/computer_alsa_timer'
  info.udi = '/org/freedesktop/Hal/devices/computer_alsa_timer'  (string)
  linux.device_file = '/dev/snd/timer'  (string)
  linux.subsystem = 'sound'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  alsa.device_file = '/dev/snd/timer'  (string)
  info.product = 'ALSA Timer Device'  (string)
  alsa.type = 'timer'  (string)
  info.capabilities = {'alsa'} (string list)
  info.category = 'alsa'  (string)
  info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
  linux.sysfs_path = '/sys/class/sound/timer'  (string)

udi = '/org/freedesktop/Hal/devices/platform_imacfb_0'
  info.udi = '/org/freedesktop/Hal/devices/platform_imacfb_0'  (string)
  linux.subsystem = 'platform'  (string)
  linux.hotplug_type = 1  (0x1)  (int)
  info.product = 'Platform Device (imacfb.0)'  (string)
  platform.id = 'imacfb.0'  (string)
  info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
  info.bus = 'platform'  (string)
  linux.sysfs_path_device = '/sys/devices/platform/imacfb.0'  (string)
  linux.sysfs_path = '/sys/devices/platform/imacfb.0'  (string)

udi = '/org/freedesktop/Hal/devices/platform_i8042'
  info.udi = '/org/freedesktop/Hal/devices/platform_i8042'  (string)
  linux.subsystem = 'platform'  (string)
  linux.hotplug_type = 1  (0x1)  (int)
  info.product = 'Platform Device (i8042)'  (string)
  platform.id = 'i8042'  (string)
  info.linux.driver = 'i8042'  (string)
  info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
  info.bus = 'platform'  (string)
  linux.sysfs_path_device = '/sys/devices/platform/i8042'  (string)
  linux.sysfs_path = '/sys/devices/platform/i8042'  (string)

udi = '/org/freedesktop/Hal/devices/platform_i8042_i8042_Aux_0_Port'
  info.udi = '/org/freedesktop/Hal/devices/platform_i8042_i8042_Aux_0_Port'  (string)
  linux.subsystem = 'serio'  (string)
  linux.hotplug_type = 1  (0x1)  (int)
  info.product = 'i8042 Aux-0 Port'  (string)
  serio.description = 'i8042 Aux-0 Port'  (string)
  serio.id = 'serio0'  (string)
  linux.hotplug_type = 1  (0x1)  (int)
  info.product = 'i8042 Aux-0 Port'  (string)
  serio.description = 'i8042 Aux-0 Port'  (string)
  serio.id = 'serio0'  (string)
  info.parent = '/org/freedesktop/Hal/devices/platform_i8042'  (string)
  info.bus = 'serio'  (string)
  linux.sysfs_path_device = '/sys/devices/platform/i8042/serio0'  (string)
  linux.sysfs_path = '/sys/devices/platform/i8042/serio0'  (string)

udi = '/org/freedesktop/Hal/devices/platform_i8042_i8042_Aux_1_Port'
  info.udi = '/org/freedesktop/Hal/devices/platform_i8042_i8042_Aux_1_Port'  (string)
  linux.subsystem = 'serio'  (string)
  linux.hotplug_type = 1  (0x1)  (int)
  info.product = 'i8042 Aux-1 Port'  (string)
  serio.description = 'i8042 Aux-1 Port'  (string)
  serio.id = 'serio1'  (string)
  info.parent = '/org/freedesktop/Hal/devices/platform_i8042'  (string)
  info.bus = 'serio'  (string)
  linux.sysfs_path_device = '/sys/devices/platform/i8042/serio1'  (string)
  linux.sysfs_path = '/sys/devices/platform/i8042/serio1'  (string)

udi = '/org/freedesktop/Hal/devices/platform_i8042_i8042_Aux_2_Port'
  info.udi = '/org/freedesktop/Hal/devices/platform_i8042_i8042_Aux_2_Port'  (string)
  linux.subsystem = 'serio'  (string)
  linux.hotplug_type = 1  (0x1)  (int)
  info.product = 'i8042 Aux-2 Port'  (string)
  serio.description = 'i8042 Aux-2 Port'  (string)
  serio.id = 'serio2'  (string)
  info.parent = '/org/freedesktop/Hal/devices/platform_i8042'  (string)
  info.bus = 'serio'  (string)
  linux.sysfs_path_device = '/sys/devices/platform/i8042/serio2'  (string)
  linux.sysfs_path = '/sys/devices/platform/i8042/serio2'  (string)

udi = '/org/freedesktop/Hal/devices/platform_i8042_i8042_Aux_3_Port'
  info.udi = '/org/freedesktop/Hal/devices/platform_i8042_i8042_Aux_3_Port'  (string)
  linux.subsystem = 'serio'  (string)
  linux.hotplug_type = 1  (0x1)  (int)
  info.product = 'i8042 Aux-3 Port'  (string)
  serio.description = 'i8042 Aux-3 Port'  (string)
  serio.id = 'serio3'  (string)
  info.linux.driver = 'psmouse'  (string)
  info.parent = '/org/freedesktop/Hal/devices/platform_i8042'  (string)
  info.bus = 'serio'  (string)
  linux.sysfs_path_device = '/sys/devices/platform/i8042/serio3'  (string)
  linux.sysfs_path = '/sys/devices/platform/i8042/serio3'  (string)

udi = '/org/freedesktop/Hal/devices/platform_i8042_i8042_Aux_3_Port_Synaptics_pass_through'
  info.udi = '/org/freedesktop/Hal/devices/platform_i8042_i8042_Aux_3_Port_Synaptics_pass_through'  (string)
  linux.subsystem = 'serio'  (string)
  linux.hotplug_type = 1  (0x1)  (int)
  info.product = 'Synaptics pass-through'  (string)
  serio.description = 'Synaptics pass-through'  (string)
  serio.id = 'serio5'  (string)
  info.parent = '/org/freedesktop/Hal/devices/platform_i8042_i8042_Aux_3_Port'  (string)
  info.bus = 'serio'  (string)
  linux.sysfs_path_device = '/sys/devices/platform/i8042/serio3/serio5'  (string)
  linux.sysfs_path = '/sys/devices/platform/i8042/serio3/serio5'  (string)


HP Compaq nx6110 Notebook PC avec wifi Linksys 802.11b qui marche :)

Hors ligne

#13 Le 29/06/2006, à 00:09

spokieszut

Re : [RESOLU... au calva!] pb cdrom, clé usb, carte son...

udi = '/org/freedesktop/Hal/devices/platform_i8042_i8042_Aux_3_Port_logicaldev_input'
  info.udi = '/org/freedesktop/Hal/devices/platform_i8042_i8042_Aux_3_Port_logicaldev_input'  (string)
  input.product = 'SynPS/2 Synaptics TouchPad'  (string)
  info.product = 'SynPS/2 Synaptics TouchPad'  (string)
  linux.device_file = '/dev/input/event2'  (string)
  linux.subsystem = 'input'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  input.device = '/dev/input/event2'  (string)
  info.capabilities = {'input', 'input.tablet'} (string list)
  info.category = 'input'  (string)
  info.parent = '/org/freedesktop/Hal/devices/platform_i8042_i8042_Aux_3_Port'  (string)
  input.physical_device = '/org/freedesktop/Hal/devices/platform_i8042_i8042_Aux_3_Port'  (string)
  linux.sysfs_path = '/sys/class/input/input2/event2'  (string)

udi = '/org/freedesktop/Hal/devices/platform_i8042_i8042_Kbd_Port'
  info.udi = '/org/freedesktop/Hal/devices/platform_i8042_i8042_Kbd_Port'  (string)  linux.subsystem = 'serio'  (string)
  linux.hotplug_type = 1  (0x1)  (int)
  info.product = 'i8042 Kbd Port'  (string)
  serio.description = 'i8042 Kbd Port'  (string)
  serio.id = 'serio4'  (string)
  info.linux.driver = 'atkbd'  (string)
  info.parent = '/org/freedesktop/Hal/devices/platform_i8042'  (string)
  info.bus = 'serio'  (string)
  linux.sysfs_path_device = '/sys/devices/platform/i8042/serio4'  (string)
  linux.sysfs_path = '/sys/devices/platform/i8042/serio4'  (string)

udi = '/org/freedesktop/Hal/devices/platform_i8042_i8042_Kbd_Port_logicaldev_input'  info.udi = '/org/freedesktop/Hal/devices/platform_i8042_i8042_Kbd_Port_logicaldev_input'  (string)
  button.has_state = false  (bool)
  button.type = ''  (string)
  info.addons = {'hald-addon-keyboard'} (string list)
  input.product = 'AT Translated Set 2 keyboard'  (string)
  info.product = 'AT Translated Set 2 keyboard'  (string)
  linux.device_file = '/dev/input/event0'  (string)
  linux.subsystem = 'input'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  input.device = '/dev/input/event0'  (string)
  info.capabilities = {'input', 'input.keyboard', 'button'} (string list)
  info.category = 'input'  (string)
  info.parent = '/org/freedesktop/Hal/devices/platform_i8042_i8042_Kbd_Port'  (string)
  input.physical_device = '/org/freedesktop/Hal/devices/platform_i8042_i8042_Kbd_Port'  (string)
  linux.sysfs_path = '/sys/class/input/input0/event0'  (string)

udi = '/org/freedesktop/Hal/devices/platform_serial8250'
  info.udi = '/org/freedesktop/Hal/devices/platform_serial8250'  (string)
  linux.subsystem = 'platform'  (string)
  linux.hotplug_type = 1  (0x1)  (int)
  info.product = 'Platform Device (serial8250)'  (string)
  platform.id = 'serial8250'  (string)
  info.linux.driver = 'serial8250'  (string)
  info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
  info.bus = 'platform'  (string)
  linux.sysfs_path_device = '/sys/devices/platform/serial8250'  (string)
  linux.sysfs_path = '/sys/devices/platform/serial8250'  (string)

udi = '/org/freedesktop/Hal/devices/platform_eisa_0'
  info.udi = '/org/freedesktop/Hal/devices/platform_eisa_0'  (string)
  linux.subsystem = 'platform'  (string)
  linux.hotplug_type = 1  (0x1)  (int)
  info.product = 'Platform Device (eisa.0)'  (string)
  platform.id = 'eisa.0'  (string)
  info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
  info.bus = 'platform'  (string)
  linux.sysfs_path_device = '/sys/devices/platform/eisa.0'  (string)
  linux.sysfs_path = '/sys/devices/platform/eisa.0'  (string)

udi = '/org/freedesktop/Hal/devices/platform_vga16fb_0'
  info.udi = '/org/freedesktop/Hal/devices/platform_vga16fb_0'  (string)
  linux.subsystem = 'platform'  (string)
  linux.hotplug_type = 1  (0x1)  (int)
  info.product = 'Platform Device (vga16fb.0)'  (string)
  platform.id = 'vga16fb.0'  (string)
  info.linux.driver = 'vga16fb'  (string)
  info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
  info.bus = 'platform'  (string)
  linux.sysfs_path_device = '/sys/devices/platform/vga16fb.0'  (string)
  linux.sysfs_path = '/sys/devices/platform/vga16fb.0'  (string)

udi = '/org/freedesktop/Hal/devices/pci_8086_2590'
  info.udi = '/org/freedesktop/Hal/devices/pci_8086_2590'  (string)
  linux.subsystem = 'pci'  (string)
  linux.hotplug_type = 1  (0x1)  (int)
  pci.subsys_product = 'nx6110'  (string)
  pci.subsys_vendor = 'Hewlett-Packard Company'  (string)
  info.product = 'Mobile 915GM/PM/GMS/910GML Express Processor to DRAM Controller'
(string)
  pci.product = 'Mobile 915GM/PM/GMS/910GML Express Processor to DRAM Controller'
(string)
  pci.product = 'Mobile 915GM/PM/GMS/910GML Express Processor to DRAM Controller'
(string)
  info.vendor = 'Intel Corporation'  (string)
  pci.vendor = 'Intel Corporation'  (string)
  pci.device_protocol = 0  (0x0)  (int)
  pci.device_subclass = 0  (0x0)  (int)
  pci.device_class = 6  (0x6)  (int)
  pci.subsys_vendor_id = 4156  (0x103c)  (int)
  pci.subsys_product_id = 2460  (0x99c)  (int)
  pci.vendor_id = 32902  (0x8086)  (int)
  pci.product_id = 9616  (0x2590)  (int)
  info.linux.driver = 'agpgart-intel'  (string)
  pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:00.0'  (string)
  info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
  info.bus = 'pci'  (string)
  linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:00.0'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:00.0'  (string)

udi = '/org/freedesktop/Hal/devices/pci_8086_2592'
  info.udi = '/org/freedesktop/Hal/devices/pci_8086_2592'  (string)
  linux.subsystem = 'pci'  (string)
  linux.hotplug_type = 1  (0x1)  (int)
  pci.subsys_product = 'nx6110'  (string)
  pci.subsys_vendor = 'Hewlett-Packard Company'  (string)
  info.product = 'Mobile 915GM/GMS/910GML Express Graphics Controller'  (string)
  pci.product = 'Mobile 915GM/GMS/910GML Express Graphics Controller'  (string)
  info.vendor = 'Intel Corporation'  (string)
  pci.vendor = 'Intel Corporation'  (string)
  pci.device_protocol = 0  (0x0)  (int)
  pci.device_subclass = 0  (0x0)  (int)
  pci.device_class = 3  (0x3)  (int)
  pci.subsys_vendor_id = 4156  (0x103c)  (int)
  pci.subsys_product_id = 2460  (0x99c)  (int)
  pci.vendor_id = 32902  (0x8086)  (int)
  pci.product_id = 9618  (0x2592)  (int)
  pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:02.0'  (string)
  info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
  info.bus = 'pci'  (string)
  linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:02.0'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:02.0'  (string)

udi = '/org/freedesktop/Hal/devices/pci_8086_2792'
  info.udi = '/org/freedesktop/Hal/devices/pci_8086_2792'  (string)
  linux.subsystem = 'pci'  (string)
  linux.hotplug_type = 1  (0x1)  (int)
  pci.subsys_product = 'nx6110'  (string)
  pci.subsys_vendor = 'Hewlett-Packard Company'  (string)
  info.product = 'Mobile 915GM/GMS/910GML Express Graphics Controller'  (string)
  pci.product = 'Mobile 915GM/GMS/910GML Express Graphics Controller'  (string)
  info.vendor = 'Intel Corporation'  (string)
  pci.vendor = 'Intel Corporation'  (string)
  pci.device_protocol = 0  (0x0)  (int)
  pci.device_subclass = 128  (0x80)  (int)
  pci.device_class = 3  (0x3)  (int)
  pci.subsys_vendor_id = 4156  (0x103c)  (int)
  pci.subsys_product_id = 2460  (0x99c)  (int)
  pci.vendor_id = 32902  (0x8086)  (int)
  pci.product_id = 10130  (0x2792)  (int)
  pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:02.1'  (string)
  info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
  info.bus = 'pci'  (string)
  linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:02.1'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:02.1'  (string)

udi = '/org/freedesktop/Hal/devices/pci_8086_2658'
  info.udi = '/org/freedesktop/Hal/devices/pci_8086_2658'  (string)
  linux.subsystem = 'pci'  (string)
  linux.hotplug_type = 1  (0x1)  (int)
  pci.subsys_product = 'nx6110'  (string)
  pci.subsys_vendor = 'Hewlett-Packard Company'  (string)
  info.product = '82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #1'  (string)
  pci.product = '82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #1'  (string)
  info.vendor = 'Intel Corporation'  (string)
  pci.vendor = 'Intel Corporation'  (string)
  pci.device_protocol = 0  (0x0)  (int)
  pci.device_subclass = 3  (0x3)  (int)
  pci.device_class = 12  (0xc)  (int)
  pci.subsys_vendor_id = 4156  (0x103c)  (int)
  pci.subsys_product_id = 2460  (0x99c)  (int)
  pci.vendor_id = 32902  (0x8086)  (int)
  pci.product_id = 9816  (0x2658)  (int)
  info.linux.driver = 'uhci_hcd'  (string)
  pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.0'  (string)
  info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
  info.bus = 'pci'  (string)
  linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:1d.0'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.0'  (string)

udi = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_1d_0'
  info.udi = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_1d_0'  (string)
  linux.subsystem = 'usb'  (string)
  linux.hotplug_type = 1  (0x1)  (int)
  usb_device.bus_number = 1  (0x1)  (int)
  usb_device.can_wake_up = false  (bool)
  usb_device.is_self_powered = true  (bool)
  usb_device.version_bcd = 272  (0x110)  (int)
  usb_device.speed_bcd = 4608  (0x1200)  (int)
  usb_device.serial = '0000:00:1d.0'  (string)
  usb_device.linux.device_number = 1  (0x1)  (int)
  usb_device.num_ports = 2  (0x2)  (int)
  usb_device.max_power = 0  (0x0)  (int)
  usb_device.device_revision_bcd = 518  (0x206)  (int)
  info.product = 'UHCI Host Controller'  (string)
  usb_device.product = 'UHCI Host Controller'  (string)
  info.vendor = 'Linux 2.6.15-25-386 uhci_hcd'  (string)
  usb_device.vendor = 'Linux 2.6.15-25-386 uhci_hcd'  (string)
  usb_device.product_id = 0  (0x0)  (int)
  usb_device.vendor_id = 0  (0x0)  (int)
  usb_device.device_protocol = 0  (0x0)  (int)
  usb_device.device_subclass = 0  (0x0)  (int)
  usb_device.device_class = 9  (0x9)  (int)
  usb_device.num_interfaces = 1  (0x1)  (int)
  usb_device.num_configurations = 1  (0x1)  (int)
  usb_device.configuration_value = 1  (0x1)  (int)
  usb_device.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.0/usb1'  (string)
  info.linux.driver = 'usb'  (string)
  info.bus = 'usb_device'  (string)
  info.parent = '/org/freedesktop/Hal/devices/pci_8086_2658'  (string)
  linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:1d.0/usb1'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.0/usb1'  (string)

udi = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_1d_0_if0'
  info.udi = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_1d_0_if0'  (string)
  linux.subsystem = 'usb'  (string)
  linux.hotplug_type = 1  (0x1)  (int)
  info.product = 'USB Hub Interface'  (string)
  usb.interface.protocol = 0  (0x0)  (int)
  usb.interface.subclass = 0  (0x0)  (int)
  usb.interface.class = 9  (0x9)  (int)
  usb.interface.number = 0  (0x0)  (int)
  info.linux.driver = 'hub'  (string)
  usb.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.0/usb1/1-0:1.0'  (string)
  usb.configuration_value = 1  (0x1)  (int)
  usb.num_configurations = 1  (0x1)  (int)
  usb.num_interfaces = 1  (0x1)  (int)
  usb.device_class = 9  (0x9)  (int)
  usb.device_subclass = 0  (0x0)  (int)
  usb.device_protocol = 0  (0x0)  (int)
  usb.vendor_id = 0  (0x0)  (int)
  usb.product_id = 0  (0x0)  (int)
  usb.vendor = 'Linux 2.6.15-25-386 uhci_hcd'  (string)
  usb.product = 'USB Hub Interface'  (string)
  usb.device_revision_bcd = 518  (0x206)  (int)
  usb.max_power = 0  (0x0)  (int)
  usb.num_ports = 2  (0x2)  (int)
  usb.linux.device_number = 1  (0x1)  (int)
  usb.serial = '0000:00:1d.0'  (string)
  usb.speed_bcd = 4608  (0x1200)  (int)
  usb.version_bcd = 272  (0x110)  (int)
  usb.is_self_powered = true  (bool)
  usb.can_wake_up = false  (bool)
  usb.bus_number = 1  (0x1)  (int)
  info.bus = 'usb'  (string)
  info.parent = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_1d_0'  (string)
  linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:1d.0/usb1/1-0:1.0'  (s
tring)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.0/usb1/1-0:1.0'  (string)


HP Compaq nx6110 Notebook PC avec wifi Linksys 802.11b qui marche :)

Hors ligne

#14 Le 29/06/2006, à 00:10

spokieszut

Re : [RESOLU... au calva!] pb cdrom, clé usb, carte son...

udi = '/org/freedesktop/Hal/devices/usb_device_46d_c00e_noserial'
  info.udi = '/org/freedesktop/Hal/devices/usb_device_46d_c00e_noserial'  (string)
  linux.subsystem = 'usb'  (string)
  linux.hotplug_type = 1  (0x1)  (int)
  usb_device.bus_number = 1  (0x1)  (int)
  usb_device.can_wake_up = true  (bool)
  usb_device.is_self_powered = false  (bool)
  usb_device.version_bcd = 512  (0x200)  (int)
  usb_device.speed_bcd = 336  (0x150)  (int)
  usb_device.linux.device_number = 4  (0x4)  (int)
  usb_device.num_ports = 0  (0x0)  (int)
  usb_device.max_power = 98  (0x62)  (int)
  usb_device.device_revision_bcd = 4352  (0x1100)  (int)
  info.product = 'M-BJ69 Optical Wheel Mouse'  (string)
  usb_device.product = 'M-BJ69 Optical Wheel Mouse'  (string)
  info.vendor = 'Logitech, Inc.'  (string)
  usb_device.vendor = 'Logitech, Inc.'  (string)
  usb_device.product_id = 49166  (0xc00e)  (int)
  usb_device.vendor_id = 1133  (0x46d)  (int)
  usb_device.device_protocol = 0  (0x0)  (int)
  usb_device.device_subclass = 0  (0x0)  (int)
  usb_device.device_class = 0  (0x0)  (int)
  usb_device.num_interfaces = 1  (0x1)  (int)
  usb_device.num_configurations = 1  (0x1)  (int)
  usb_device.configuration_value = 1  (0x1)  (int)
  usb_device.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.0/usb1/1-2'  (string)
  info.linux.driver = 'usb'  (string)
  info.bus = 'usb_device'  (string)
  info.parent = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_1d_0'  (string)
  linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:1d.0/usb1/1-2'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.0/usb1/1-2'  (string)

udi = '/org/freedesktop/Hal/devices/usb_device_46d_c00e_noserial_if0'
  info.udi = '/org/freedesktop/Hal/devices/usb_device_46d_c00e_noserial_if0'  (string)
  linux.subsystem = 'usb'  (string)
  linux.hotplug_type = 1  (0x1)  (int)
  info.product = 'USB HID Interface'  (string)
  usb.interface.protocol = 2  (0x2)  (int)
  usb.interface.subclass = 1  (0x1)  (int)
  usb.interface.class = 3  (0x3)  (int)
  usb.interface.number = 0  (0x0)  (int)
  info.linux.driver = 'usbhid'  (string)
  usb.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.0/usb1/1-2/1-2:1.0'  (string)
  usb.configuration_value = 1  (0x1)  (int)
  usb.num_configurations = 1  (0x1)  (int)
  usb.num_interfaces = 1  (0x1)  (int)
  usb.device_class = 0  (0x0)  (int)
  usb.device_subclass = 0  (0x0)  (int)
  usb.device_protocol = 0  (0x0)  (int)
  usb.vendor_id = 1133  (0x46d)  (int)
  usb.product_id = 49166  (0xc00e)  (int)
  usb.vendor = 'Logitech, Inc.'  (string)
  usb.product = 'USB HID Interface'  (string)
  usb.device_revision_bcd = 4352  (0x1100)  (int)
  usb.max_power = 98  (0x62)  (int)
  usb.num_ports = 0  (0x0)  (int)
  usb.linux.device_number = 4  (0x4)  (int)
  usb.speed_bcd = 336  (0x150)  (int)
  usb.version_bcd = 512  (0x200)  (int)
  usb.is_self_powered = false  (bool)
  usb.can_wake_up = true  (bool)
  usb.bus_number = 1  (0x1)  (int)
  info.bus = 'usb'  (string)
  info.parent = '/org/freedesktop/Hal/devices/usb_device_46d_c00e_noserial'  (string)
  linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:1d.0/usb1/1-2/1-2:1.0'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.0/usb1/1-2/1-2:1.0'  (string)

udi = '/org/freedesktop/Hal/devices/usb_device_46d_c00e_noserial_if0_logicaldev_input'
  info.udi = '/org/freedesktop/Hal/devices/usb_device_46d_c00e_noserial_if0_logicaldev_input'  (string)
  input.product = 'Logitech USB-PS/2 Optical Mouse'  (string)
  info.product = 'Logitech USB-PS/2 Optical Mouse'  (string)
  linux.device_file = '/dev/input/event1'  (string)
  linux.subsystem = 'input'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  input.device = '/dev/input/event1'  (string)
  info.capabilities = {'input', 'input.mouse'} (string list)
  info.category = 'input'  (string)
  info.parent = '/org/freedesktop/Hal/devices/usb_device_46d_c00e_noserial_if0'  (string)
  input.physical_device = '/org/freedesktop/Hal/devices/usb_device_46d_c00e_noserial_if0'  (string)
  linux.sysfs_path = '/sys/class/input/input1/event1'  (string)

udi = '/org/freedesktop/Hal/devices/usb_device_46d_c00e_noserial_usbraw'
  info.udi = '/org/freedesktop/Hal/devices/usb_device_46d_c00e_noserial_usbraw'  (string)
  linux.device_file = '/dev/bus/usb/001/004'  (string)
  linux.subsystem = 'usb_device'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  usbraw.device = '/dev/bus/usb/001/004'  (string)
  info.product = 'USB Raw Device Access'  (string)
  info.capabilities = {'usbraw'} (string list)
  info.category = 'usbraw'  (string)
  info.parent = '/org/freedesktop/Hal/devices/usb_device_46d_c00e_noserial'  (string)
  linux.sysfs_path = '/sys/class/usb_device/usbdev1.4'  (string)

udi = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_1d_0_usbraw'
  info.udi = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_1d_0_usbraw'  (string)
  linux.device_file = '/dev/bus/usb/001/001'  (string)
  linux.subsystem = 'usb_device'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  usbraw.device = '/dev/bus/usb/001/001'  (string)
  info.product = 'USB Raw Device Access'  (string)
  info.capabilities = {'usbraw'} (string list)
  info.category = 'usbraw'  (string)
  info.parent = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_1d_0'  (string)
  linux.sysfs_path = '/sys/class/usb_device/usbdev1.1'  (string)

udi = '/org/freedesktop/Hal/devices/pci_8086_2659'
  info.udi = '/org/freedesktop/Hal/devices/pci_8086_2659'  (string)
  linux.subsystem = 'pci'  (string)
  linux.hotplug_type = 1  (0x1)  (int)
  pci.subsys_product = 'nx6110'  (string)
  pci.subsys_vendor = 'Hewlett-Packard Company'  (string)
  info.product = '82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #2'  (string)
  pci.product = '82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #2'  (string)
  info.vendor = 'Intel Corporation'  (string)
  pci.vendor = 'Intel Corporation'  (string)
  pci.device_protocol = 0  (0x0)  (int)
  pci.device_subclass = 3  (0x3)  (int)
  pci.device_class = 12  (0xc)  (int)
  pci.subsys_vendor_id = 4156  (0x103c)  (int)
  pci.subsys_product_id = 2460  (0x99c)  (int)
  pci.vendor_id = 32902  (0x8086)  (int)
  pci.product_id = 9817  (0x2659)  (int)
  info.linux.driver = 'uhci_hcd'  (string)
  pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.1'  (string)
  info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
  info.bus = 'pci'  (string)
  linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:1d.1'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.1'  (string)

udi = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_1d_1'
  info.udi = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_1d_1'  (string)
  linux.subsystem = 'usb'  (string)
  linux.hotplug_type = 1  (0x1)  (int)
  usb_device.bus_number = 2  (0x2)  (int)
  usb_device.can_wake_up = false  (bool)
  usb_device.is_self_powered = true  (bool)
  usb_device.version_bcd = 272  (0x110)  (int)
  usb_device.speed_bcd = 4608  (0x1200)  (int)
  usb_device.serial = '0000:00:1d.1'  (string)
  usb_device.linux.device_number = 1  (0x1)  (int)
  usb_device.num_ports = 2  (0x2)  (int)
  usb_device.max_power = 0  (0x0)  (int)
  usb_device.device_revision_bcd = 518  (0x206)  (int)
  info.product = 'UHCI Host Controller'  (string)
  usb_device.product = 'UHCI Host Controller'  (string)
  info.vendor = 'Linux 2.6.15-25-386 uhci_hcd'  (string)
  usb_device.vendor = 'Linux 2.6.15-25-386 uhci_hcd'  (string)
  usb_device.product_id = 0  (0x0)  (int)
  usb_device.vendor_id = 0  (0x0)  (int)
  usb_device.device_protocol = 0  (0x0)  (int)
  usb_device.device_subclass = 0  (0x0)  (int)
  usb_device.device_class = 9  (0x9)  (int)
  usb_device.num_interfaces = 1  (0x1)  (int)
  usb_device.num_configurations = 1  (0x1)  (int)
  usb_device.configuration_value = 1  (0x1)  (int)
  usb_device.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.1/usb2'  (string)
  info.linux.driver = 'usb'  (string)
  info.bus = 'usb_device'  (string)
  info.parent = '/org/freedesktop/Hal/devices/pci_8086_2659'  (string)
  linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:1d.1/usb2'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.1/usb2'  (string)

udi = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_1d_1_if0'
  info.udi = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_1d_1_if0'  (string)
  linux.subsystem = 'usb'  (string)
  linux.hotplug_type = 1  (0x1)  (int)
  info.product = 'USB Hub Interface'  (string)
  usb.interface.protocol = 0  (0x0)  (int)
  usb.interface.subclass = 0  (0x0)  (int)
  usb.interface.class = 9  (0x9)  (int)
  usb.interface.number = 0  (0x0)  (int)
  info.linux.driver = 'hub'  (string)
  usb.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.1/usb2/2-0:1.0'  (string)
  usb.configuration_value = 1  (0x1)  (int)
  usb.num_configurations = 1  (0x1)  (int)
  usb.num_interfaces = 1  (0x1)  (int)
  usb.device_class = 9  (0x9)  (int)
  usb.device_subclass = 0  (0x0)  (int)
  usb.device_protocol = 0  (0x0)  (int)
  usb.vendor_id = 0  (0x0)  (int)
  usb.product_id = 0  (0x0)  (int)
  usb.vendor = 'Linux 2.6.15-25-386 uhci_hcd'  (string)
  usb.product = 'USB Hub Interface'  (string)
  usb.device_revision_bcd = 518  (0x206)  (int)
  usb.max_power = 0  (0x0)  (int)
  usb.num_ports = 2  (0x2)  (int)
  usb.linux.device_number = 1  (0x1)  (int)
  usb.serial = '0000:00:1d.1'  (string)
  usb.speed_bcd = 4608  (0x1200)  (int)
  usb.version_bcd = 272  (0x110)  (int)
  usb.is_self_powered = true  (bool)
  usb.can_wake_up = false  (bool)
  usb.bus_number = 2  (0x2)  (int)
  info.bus = 'usb'  (string)
  info.parent = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_1d_1'  (string)
  linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:1d.1/usb2/2-0:1.0'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.1/usb2/2-0:1.0'  (string)

udi = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_1d_1_usbraw'
  info.udi = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_1d_1_usbraw'  (string)
  linux.device_file = '/dev/bus/usb/002/001'  (string)
  linux.subsystem = 'usb_device'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  usbraw.device = '/dev/bus/usb/002/001'  (string)
  info.product = 'USB Raw Device Access'  (string)
  info.capabilities = {'usbraw'} (string list)
  info.category = 'usbraw'  (string)
  info.parent = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_1d_1'  (string)
  linux.sysfs_path = '/sys/class/usb_device/usbdev2.1'  (string)

udi = '/org/freedesktop/Hal/devices/pci_8086_265a'
  info.udi = '/org/freedesktop/Hal/devices/pci_8086_265a'  (string)
  linux.subsystem = 'pci'  (string)
  linux.hotplug_type = 1  (0x1)  (int)
  pci.subsys_product = 'nx6110'  (string)
  pci.subsys_vendor = 'Hewlett-Packard Company'  (string)
  info.product = '82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #3'  (string)
  pci.product = '82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #3'  (string)
  info.vendor = 'Intel Corporation'  (string)
  pci.vendor = 'Intel Corporation'  (string)
  pci.device_protocol = 0  (0x0)  (int)
  pci.device_subclass = 3  (0x3)  (int)
  pci.device_class = 12  (0xc)  (int)
  pci.subsys_vendor_id = 4156  (0x103c)  (int)
  pci.subsys_product_id = 2460  (0x99c)  (int)
  pci.vendor_id = 32902  (0x8086)  (int)
  pci.product_id = 9818  (0x265a)  (int)
  info.linux.driver = 'uhci_hcd'  (string)
  pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.2'  (string)
  info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
  info.bus = 'pci'  (string)
  linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:1d.2'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.2'  (string)

udi = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_1d_2'
  info.udi = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_1d_2'  (string)
  linux.subsystem = 'usb'  (string)
  linux.hotplug_type = 1  (0x1)  (int)
  usb_device.bus_number = 3  (0x3)  (int)
  usb_device.can_wake_up = false  (bool)
  usb_device.is_self_powered = true  (bool)
  usb_device.version_bcd = 272  (0x110)  (int)
  usb_device.speed_bcd = 4608  (0x1200)  (int)
  usb_device.serial = '0000:00:1d.2'  (string)
  usb_device.linux.device_number = 1  (0x1)  (int)
  usb_device.num_ports = 2  (0x2)  (int)
  usb_device.max_power = 0  (0x0)  (int)
  usb_device.device_revision_bcd = 518  (0x206)  (int)
  info.product = 'UHCI Host Controller'  (string)
  usb_device.product = 'UHCI Host Controller'  (string)
  info.vendor = 'Linux 2.6.15-25-386 uhci_hcd'  (string)
  usb_device.vendor = 'Linux 2.6.15-25-386 uhci_hcd'  (string)
  usb_device.product_id = 0  (0x0)  (int)
  usb_device.vendor_id = 0  (0x0)  (int)
  usb_device.device_protocol = 0  (0x0)  (int)
  usb_device.device_subclass = 0  (0x0)  (int)
  usb_device.device_class = 9  (0x9)  (int)
  usb_device.num_interfaces = 1  (0x1)  (int)
  usb_device.num_configurations = 1  (0x1)  (int)
  usb_device.configuration_value = 1  (0x1)  (int)
  usb_device.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.2/usb3'  (strin
g)
  info.linux.driver = 'usb'  (string)
  info.bus = 'usb_device'  (string)
  info.parent = '/org/freedesktop/Hal/devices/pci_8086_265a'  (string)
  linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:1d.2/usb3'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.2/usb3'  (string)

udi = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_1d_2_if0'
  info.udi = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_1d_2_if0'  (string)
  linux.subsystem = 'usb'  (string)
  linux.hotplug_type = 1  (0x1)  (int)
  info.product = 'USB Hub Interface'  (string)
  usb.interface.protocol = 0  (0x0)  (int)
  usb.interface.subclass = 0  (0x0)  (int)
  usb.interface.class = 9  (0x9)  (int)
  usb.interface.number = 0  (0x0)  (int)
  info.linux.driver = 'hub'  (string)
  usb.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.2/usb3/3-0:1.0'  (string)
  usb.configuration_value = 1  (0x1)  (int)
  usb.num_configurations = 1  (0x1)  (int)
  usb.num_interfaces = 1  (0x1)  (int)
  usb.device_class = 9  (0x9)  (int)
  usb.device_subclass = 0  (0x0)  (int)
  usb.device_protocol = 0  (0x0)  (int)
  usb.vendor_id = 0  (0x0)  (int)
  usb.product_id = 0  (0x0)  (int)
  usb.vendor = 'Linux 2.6.15-25-386 uhci_hcd'  (string)
  usb.product = 'USB Hub Interface'  (string)
  usb.device_revision_bcd = 518  (0x206)  (int)
  usb.max_power = 0  (0x0)  (int)
  usb.num_ports = 2  (0x2)  (int)
  usb.linux.device_number = 1  (0x1)  (int)
  usb.serial = '0000:00:1d.2'  (string)
  usb.speed_bcd = 4608  (0x1200)  (int)
  usb.version_bcd = 272  (0x110)  (int)
  usb.is_self_powered = true  (bool)
  usb.can_wake_up = false  (bool)
  usb.bus_number = 3  (0x3)  (int)
  info.bus = 'usb'  (string)
  info.parent = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_1d_2'  (string)
  linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:1d.2/usb3/3-0:1.0'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.2/usb3/3-0:1.0'  (string)

udi = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_1d_2_usbraw'
  info.udi = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_1d_2_usbraw'  (string)
  linux.device_file = '/dev/bus/usb/003/001'  (string)
  linux.subsystem = 'usb_device'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  usbraw.device = '/dev/bus/usb/003/001'  (string)
  info.product = 'USB Raw Device Access'  (string)
  info.capabilities = {'usbraw'} (string list)
  info.category = 'usbraw'  (string)
  info.parent = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_1d_2'  (string)
  linux.sysfs_path = '/sys/class/usb_device/usbdev3.1'  (string)

udi = '/org/freedesktop/Hal/devices/pci_8086_265b'
  info.udi = '/org/freedesktop/Hal/devices/pci_8086_265b'  (string)
  linux.subsystem = 'pci'  (string)
  linux.hotplug_type = 1  (0x1)  (int)
  pci.subsys_product = 'nx6110'  (string)
  pci.subsys_vendor = 'Hewlett-Packard Company'  (string)
  info.product = '82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #4'  (string)
  pci.product = '82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #4'  (string)
  info.vendor = 'Intel Corporation'  (string)
  pci.vendor = 'Intel Corporation'  (string)
  pci.device_protocol = 0  (0x0)  (int)
  pci.device_subclass = 3  (0x3)  (int)
  pci.device_class = 12  (0xc)  (int)
  pci.subsys_vendor_id = 4156  (0x103c)  (int)
  pci.subsys_product_id = 2460  (0x99c)  (int)
  pci.vendor_id = 32902  (0x8086)  (int)
  pci.product_id = 9819  (0x265b)  (int)
  info.linux.driver = 'uhci_hcd'  (string)
  pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.3'  (string)
  info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
  info.bus = 'pci'  (string)
  linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:1d.3'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.3'  (string)


HP Compaq nx6110 Notebook PC avec wifi Linksys 802.11b qui marche :)

Hors ligne

#15 Le 29/06/2006, à 00:10

spokieszut

Re : [RESOLU... au calva!] pb cdrom, clé usb, carte son...

udi = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_1d_3'
  info.udi = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_1d_3'  (string)
  linux.subsystem = 'usb'  (string)
  linux.hotplug_type = 1  (0x1)  (int)
  usb_device.bus_number = 4  (0x4)  (int)
  usb_device.can_wake_up = false  (bool)
  usb_device.is_self_powered = true  (bool)
  usb_device.version_bcd = 272  (0x110)  (int)
  usb_device.speed_bcd = 4608  (0x1200)  (int)
  usb_device.serial = '0000:00:1d.3'  (string)
  usb_device.linux.device_number = 1  (0x1)  (int)
  usb_device.num_ports = 2  (0x2)  (int)
  usb_device.max_power = 0  (0x0)  (int)
  usb_device.device_revision_bcd = 518  (0x206)  (int)
  info.product = 'UHCI Host Controller'  (string)
  usb_device.product = 'UHCI Host Controller'  (string)
  info.vendor = 'Linux 2.6.15-25-386 uhci_hcd'  (string)
  usb_device.vendor = 'Linux 2.6.15-25-386 uhci_hcd'  (string)
  usb_device.product_id = 0  (0x0)  (int)
  usb_device.vendor_id = 0  (0x0)  (int)
  usb_device.device_protocol = 0  (0x0)  (int)
  usb_device.device_subclass = 0  (0x0)  (int)
  usb_device.device_class = 9  (0x9)  (int)
  usb_device.num_interfaces = 1  (0x1)  (int)
  usb_device.num_configurations = 1  (0x1)  (int)
  usb_device.configuration_value = 1  (0x1)  (int)
  usb_device.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.3/usb4'  (string)
  info.linux.driver = 'usb'  (string)
  info.bus = 'usb_device'  (string)
  info.parent = '/org/freedesktop/Hal/devices/pci_8086_265b'  (string)
  linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:1d.3/usb4'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.3/usb4'  (string)

udi = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_1d_3_if0'
  info.udi = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_1d_3_if0'  (string)
  linux.subsystem = 'usb'  (string)
  linux.hotplug_type = 1  (0x1)  (int)
  info.product = 'USB Hub Interface'  (string)
  usb.interface.protocol = 0  (0x0)  (int)
  usb.interface.subclass = 0  (0x0)  (int)
  usb.interface.class = 9  (0x9)  (int)
  usb.interface.number = 0  (0x0)  (int)
  info.linux.driver = 'hub'  (string)
  usb.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.3/usb4/4-0:1.0'  (string)
  usb.configuration_value = 1  (0x1)  (int)
  usb.num_configurations = 1  (0x1)  (int)
  usb.num_interfaces = 1  (0x1)  (int)
  usb.device_class = 9  (0x9)  (int)
  usb.device_subclass = 0  (0x0)  (int)
  usb.device_protocol = 0  (0x0)  (int)
  usb.vendor_id = 0  (0x0)  (int)
  usb.product_id = 0  (0x0)  (int)
  usb.vendor = 'Linux 2.6.15-25-386 uhci_hcd'  (string)
  usb.product = 'USB Hub Interface'  (string)
  usb.device_revision_bcd = 518  (0x206)  (int)
  usb.max_power = 0  (0x0)  (int)
  usb.num_ports = 2  (0x2)  (int)
  usb.linux.device_number = 1  (0x1)  (int)
  usb.serial = '0000:00:1d.3'  (string)
  usb.speed_bcd = 4608  (0x1200)  (int)
  usb.version_bcd = 272  (0x110)  (int)
  usb.is_self_powered = true  (bool)
  usb.can_wake_up = false  (bool)
  usb.bus_number = 4  (0x4)  (int)
  info.bus = 'usb'  (string)
  info.parent = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_1d_3'  (string)
  linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:1d.3/usb4/4-0:1.0'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.3/usb4/4-0:1.0'  (string)

udi = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_1d_3_usbraw'
  info.udi = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_1d_3_usbraw'  (string)
  linux.device_file = '/dev/bus/usb/004/001'  (string)
  linux.subsystem = 'usb_device'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  usbraw.device = '/dev/bus/usb/004/001'  (string)
  info.product = 'USB Raw Device Access'  (string)
  info.capabilities = {'usbraw'} (string list)
  info.category = 'usbraw'  (string)
  info.parent = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_1d_3'  (string)
  linux.sysfs_path = '/sys/class/usb_device/usbdev4.1'  (string)

udi = '/org/freedesktop/Hal/devices/pci_8086_265c'
  info.udi = '/org/freedesktop/Hal/devices/pci_8086_265c'  (string)
  linux.subsystem = 'pci'  (string)
  linux.hotplug_type = 1  (0x1)  (int)
  pci.subsys_product = 'nx6110'  (string)
  pci.subsys_vendor = 'Hewlett-Packard Company'  (string)
  info.product = '82801FB/FBM/FR/FW/FRW (ICH6 Family) USB2 EHCI Controller'  (string)
  pci.product = '82801FB/FBM/FR/FW/FRW (ICH6 Family) USB2 EHCI Controller'  (string)
  info.vendor = 'Intel Corporation'  (string)
  pci.vendor = 'Intel Corporation'  (string)
  pci.device_protocol = 32  (0x20)  (int)
  pci.device_subclass = 3  (0x3)  (int)
  pci.device_class = 12  (0xc)  (int)
  pci.subsys_vendor_id = 4156  (0x103c)  (int)
  pci.subsys_product_id = 2460  (0x99c)  (int)
  pci.vendor_id = 32902  (0x8086)  (int)
  pci.product_id = 9820  (0x265c)  (int)
  info.linux.driver = 'ehci_hcd'  (string)
  pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.7'  (string)
  info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
  info.bus = 'pci'  (string)
  linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:1d.7'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.7'  (string)

udi = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_1d_7'
  info.udi = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_1d_7'  (string)
  linux.subsystem = 'usb'  (string)
  linux.hotplug_type = 1  (0x1)  (int)
  usb_device.bus_number = 5  (0x5)  (int)
  usb_device.can_wake_up = false  (bool)
  usb_device.is_self_powered = true  (bool)
  usb_device.version_bcd = 512  (0x200)  (int)
  usb_device.speed_bcd = 294912  (0x48000)  (int)
  usb_device.serial = '0000:00:1d.7'  (string)
  usb_device.linux.device_number = 1  (0x1)  (int)
  usb_device.num_ports = 8  (0x8)  (int)
  usb_device.max_power = 0  (0x0)  (int)
  usb_device.device_revision_bcd = 518  (0x206)  (int)
  info.product = 'EHCI Host Controller'  (string)
  usb_device.product = 'EHCI Host Controller'  (string)
  info.vendor = 'Linux 2.6.15-25-386 ehci_hcd'  (string)
  usb_device.vendor = 'Linux 2.6.15-25-386 ehci_hcd'  (string)
  usb_device.product_id = 0  (0x0)  (int)
  usb_device.vendor_id = 0  (0x0)  (int)
  usb_device.device_protocol = 1  (0x1)  (int)
  usb_device.device_subclass = 0  (0x0)  (int)
  usb_device.device_class = 9  (0x9)  (int)
  usb_device.num_interfaces = 1  (0x1)  (int)
  usb_device.num_configurations = 1  (0x1)  (int)
  usb_device.configuration_value = 1  (0x1)  (int)
  usb_device.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.7/usb5'  (string)
  info.linux.driver = 'usb'  (string)
  info.bus = 'usb_device'  (string)
  info.parent = '/org/freedesktop/Hal/devices/pci_8086_265c'  (string)
  linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:1d.7/usb5'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.7/usb5'  (string)

udi = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_1d_7_if0'
  info.udi = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_1d_7_if0'  (string)
  linux.subsystem = 'usb'  (string)
  linux.hotplug_type = 1  (0x1)  (int)
  info.product = 'USB Hub Interface'  (string)
  usb.interface.protocol = 0  (0x0)  (int)
  usb.interface.subclass = 0  (0x0)  (int)
  usb.interface.class = 9  (0x9)  (int)
  usb.interface.number = 0  (0x0)  (int)
  info.linux.driver = 'hub'  (string)
  usb.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.7/usb5/5-0:1.0'  (string)
  usb.configuration_value = 1  (0x1)  (int)
  usb.num_configurations = 1  (0x1)  (int)
  usb.num_interfaces = 1  (0x1)  (int)
  usb.device_class = 9  (0x9)  (int)
  usb.device_subclass = 0  (0x0)  (int)
  usb.device_protocol = 1  (0x1)  (int)
  usb.vendor_id = 0  (0x0)  (int)
  usb.product_id = 0  (0x0)  (int)
  usb.vendor = 'Linux 2.6.15-25-386 ehci_hcd'  (string)
  usb.product = 'USB Hub Interface'  (string)
  usb.device_revision_bcd = 518  (0x206)  (int)
  usb.max_power = 0  (0x0)  (int)
  usb.num_ports = 8  (0x8)  (int)
  usb.linux.device_number = 1  (0x1)  (int)
  usb.serial = '0000:00:1d.7'  (string)
  usb.speed_bcd = 294912  (0x48000)  (int)
  usb.version_bcd = 512  (0x200)  (int)
  usb.is_self_powered = true  (bool)
  usb.can_wake_up = false  (bool)
  usb.bus_number = 5  (0x5)  (int)
  info.bus = 'usb'  (string)
  info.parent = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_1d_7'  (string)
  linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:1d.7/usb5/5-0:1.0'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.7/usb5/5-0:1.0'  (string)

udi = '/org/freedesktop/Hal/devices/usb_device_5dc_340_106A78051944071'
  info.udi = '/org/freedesktop/Hal/devices/usb_device_5dc_340_106A78051944071'  (string)
  linux.subsystem = 'usb'  (string)
  linux.hotplug_type = 1  (0x1)  (int)
  usb_device.bus_number = 5  (0x5)  (int)
  usb_device.can_wake_up = false  (bool)
  usb_device.is_self_powered = false  (bool)
  usb_device.version_bcd = 512  (0x200)  (int)
  usb_device.speed_bcd = 294912  (0x48000)  (int)
  usb_device.serial = '106A78051944071'  (string)
  usb_device.linux.device_number = 2  (0x2)  (int)
  usb_device.num_ports = 0  (0x0)  (int)
  usb_device.max_power = 120  (0x78)  (int)
  usb_device.device_revision_bcd = 1  (0x1)  (int)
  info.product = 'JumpDrive'  (string)
  usb_device.product = 'JumpDrive'  (string)
  info.vendor = 'Lexar Media, Inc.'  (string)
  usb_device.vendor = 'Lexar Media, Inc.'  (string)
  usb_device.product_id = 832  (0x340)  (int)
  usb_device.vendor_id = 1500  (0x5dc)  (int)
  usb_device.device_protocol = 0  (0x0)  (int)
  usb_device.device_subclass = 0  (0x0)  (int)
  usb_device.device_class = 0  (0x0)  (int)
  usb_device.num_interfaces = 1  (0x1)  (int)
  usb_device.num_configurations = 1  (0x1)  (int)
  usb_device.configuration_value = 1  (0x1)  (int)
  usb_device.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.7/usb5/5-1'  (string)
  info.linux.driver = 'usb'  (string)
  info.bus = 'usb_device'  (string)
  info.parent = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_1d_7'  (string)
  linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:1d.7/usb5/5-1'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.7/usb5/5-1'  (string)

udi = '/org/freedesktop/Hal/devices/usb_device_5dc_340_106A78051944071_if0'
  info.udi = '/org/freedesktop/Hal/devices/usb_device_5dc_340_106A78051944071_if0'
(string)
  linux.subsystem = 'usb'  (string)
  linux.hotplug_type = 1  (0x1)  (int)
  info.product = 'USB Mass Storage Interface'  (string)
  usb.interface.protocol = 80  (0x50)  (int)
  usb.interface.subclass = 6  (0x6)  (int)
  usb.interface.class = 8  (0x8)  (int)
  usb.interface.number = 0  (0x0)  (int)
  info.linux.driver = 'usb-storage'  (string)
  usb.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.7/usb5/5-1/5-1:1.0'  (string)
  usb.configuration_value = 1  (0x1)  (int)
  usb.num_configurations = 1  (0x1)  (int)
  usb.num_interfaces = 1  (0x1)  (int)
  usb.device_class = 0  (0x0)  (int)
  usb.device_subclass = 0  (0x0)  (int)
  usb.device_protocol = 0  (0x0)  (int)
  usb.vendor_id = 1500  (0x5dc)  (int)
  usb.product_id = 832  (0x340)  (int)
  usb.vendor = 'Lexar Media, Inc.'  (string)
  usb.product = 'USB Mass Storage Interface'  (string)
  usb.device_revision_bcd = 1  (0x1)  (int)
  usb.max_power = 120  (0x78)  (int)
  usb.num_ports = 0  (0x0)  (int)
  usb.linux.device_number = 2  (0x2)  (int)
  usb.serial = '106A78051944071'  (string)
  usb.speed_bcd = 294912  (0x48000)  (int)
  usb.version_bcd = 512  (0x200)  (int)
  usb.is_self_powered = false  (bool)
  usb.can_wake_up = false  (bool)
  usb.bus_number = 5  (0x5)  (int)
  info.bus = 'usb'  (string)
  info.parent = '/org/freedesktop/Hal/devices/usb_device_5dc_340_106A78051944071'
(string)
  linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:1d.7/usb5/5-1/5-1:1.0'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.7/usb5/5-1/5-1:1.0'  (string)

udi = '/org/freedesktop/Hal/devices/usb_device_5dc_340_106A78051944071_if0_scsi_hos
t'
  info.udi = '/org/freedesktop/Hal/devices/usb_device_5dc_340_106A78051944071_if0_scsi_host'  (string)
  linux.subsystem = 'scsi_host'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  scsi_host.host = 0  (0x0)  (int)
  info.product = 'SCSI Host Adapter'  (string)
  info.capabilities = {'scsi_host'} (string list)
  info.category = 'scsi_host'  (string)
  info.parent = '/org/freedesktop/Hal/devices/usb_device_5dc_340_106A78051944071_if0'  (string)
  linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:1d.7/usb5/5-1/5-1:1.0/host0'  (string)
  linux.sysfs_path = '/sys/class/scsi_host/host0'  (string)

udi = '/org/freedesktop/Hal/devices/usb_device_5dc_340_106A78051944071_if0_scsi_host_scsi_device_lun0'
  info.udi = '/org/freedesktop/Hal/devices/usb_device_5dc_340_106A78051944071_if0_scsi_host_scsi_device_lun0'  (string)
  linux.subsystem = 'scsi'  (string)
  linux.hotplug_type = 1  (0x1)  (int)
  scsi.type = 'disk'  (string)
  scsi.vendor = 'Lexar'  (string)
  scsi.model = 'JumpDrive'  (string)
  info.product = 'SCSI Device'  (string)
  info.linux.driver = 'sd'  (string)
  scsi.lun = 0  (0x0)  (int)
  scsi.target = 0  (0x0)  (int)
  scsi.bus = 0  (0x0)  (int)
  scsi.host = 0  (0x0)  (int)
  info.parent = '/org/freedesktop/Hal/devices/usb_device_5dc_340_106A78051944071_if
0_scsi_host'  (string)
  info.bus = 'scsi'  (string)
  linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:1d.7/usb5/5-1/5-1:1.0/host0/target0:0:0/0:0:0:0'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.7/usb5/5-1/5-1:1.0/host0/target0:0:0/0:0:0:0'  (string)

udi = '/org/freedesktop/Hal/devices/storage_serial_Lexar_JumpDrive_106A78051944071'
  info.addons = {'hald-addon-storage', 'hald-addon-storage'} (string list)
  storage.policy.should_mount = true  (bool)
  block.storage_device = '/org/freedesktop/Hal/devices/storage_serial_Lexar_JumpDrive_106A78051944071'  (string)
  info.udi = '/org/freedesktop/Hal/devices/storage_serial_Lexar_JumpDrive_106A78051944071'  (string)
  storage.requires_eject = true  (bool)
  storage.hotpluggable = true  (bool)
  info.capabilities = {'storage', 'block'} (string list)
  info.category = 'storage'  (string)
  info.product = 'JumpDrive'  (string)
  info.vendor = 'Lexar'  (string)
  storage.removable = true  (bool)
  storage.physical_device = '/org/freedesktop/Hal/devices/usb_device_5dc_340_106A78051944071_if0'  (string)
  storage.lun = 0  (0x0)  (int)
  storage.firmware_version = '1.00'  (string)
  storage.serial = 'Lexar_JumpDrive_106A78051944071'  (string)
  storage.vendor = 'Lexar'  (string)
  storage.model = 'JumpDrive'  (string)
  storage.drive_type = 'disk'  (string)
  storage.automount_enabled_hint = true  (bool)
  storage.media_check_enabled = true  (bool)
  storage.no_partitions_hint = false  (bool)
  storage.bus = 'usb'  (string)
  block.is_volume = false  (bool)
  block.minor = 0  (0x0)  (int)
  block.major = 8  (0x8)  (int)
  block.device = '/dev/sda'  (string)
  linux.hotplug_type = 3  (0x3)  (int)
  info.parent = '/org/freedesktop/Hal/devices/usb_device_5dc_340_106A78051944071_if0_scsi_host_scsi_device_lun0'  (string)
  linux.sysfs_path_device = '/sys/block/sda'  (string)
  linux.sysfs_path = '/sys/block/sda'  (string)

udi = '/org/freedesktop/Hal/devices/volume_part1_size_257932288'
  volume.unmount.valid_options = {'lazy'} (string list)
  volume.mount.valid_options = {'ro', 'sync', 'dirsync', 'noatime', 'nodiratime', 'noexec', 'quiet', 'utf8', 'shortname=', 'codepage=', 'iocharset=', 'umask=', 'dmask=', 'fmask=', 'uid='} (string list)
  org.freedesktop.Hal.Device.Volume.method_execpaths = {'hal-system-storage-mount', 'hal-system-storage-unmount', 'hal-system-storage-eject'} (string list)
  org.freedesktop.Hal.Device.Volume.method_signatures = {'ssas', 'as', 'as'} (string list)
  org.freedesktop.Hal.Device.Volume.method_names = {'Mount', 'Unmount', 'Eject'} (string list)
  info.interfaces = {'org.freedesktop.Hal.Device.Volume'} (string list)
  volume.ignore = false  (bool)
  volume.policy.desired_mount_point = 'usbdisk'  (string)
  volume.policy.mount_filesystem = 'vfat'  (string)
  volume.policy.should_mount = true  (bool)
  volume.policy.mount_option.quiet = true  (bool)
  volume.policy.mount_option.iocharset=utf8 = true  (bool)
  info.udi = '/org/freedesktop/Hal/devices/volume_part1_size_257932288'  (string)
  volume.partition.msdos_part_table_type = 11  (0xb)  (int)
  info.product = 'Volume (vfat)'  (string)
  volume.size = 257932288  (0xf5fbc00)  (uint64)
  volume.num_blocks = 503774  (0x7afde)  (int)
  volume.block_size = 512  (0x200)  (int)
  volume.partition.number = 1  (0x1)  (int)
  info.capabilities = {'volume', 'block'} (string list)
  info.category = 'volume'  (string)
  volume.is_partition = true  (bool)
  volume.is_disc = false  (bool)
  volume.is_mounted_read_only = false  (bool)
  volume.is_mounted = false  (bool)
  volume.mount_point = ''  (string)
  volume.label = ''  (string)
  volume.uuid = ''  (string)
  volume.fsversion = 'FAT32'  (string)
  volume.fsusage = 'filesystem'  (string)
  volume.fstype = 'vfat'  (string)
  storage.model = ''  (string)
  block.storage_device = '/org/freedesktop/Hal/devices/storage_serial_Lexar_JumpDrive_106A78051944071'  (string)
  block.is_volume = true  (bool)
  block.minor = 1  (0x1)  (int)
  block.major = 8  (0x8)  (int)
  block.device = '/dev/sda1'  (string)
  linux.hotplug_type = 3  (0x3)  (int)
  info.parent = '/org/freedesktop/Hal/devices/storage_serial_Lexar_JumpDrive_106A78051944071'  (string)
  linux.sysfs_path_device = '/sys/block/sda/sda1'  (string)
  linux.sysfs_path = '/sys/block/sda/sda1'  (string)


HP Compaq nx6110 Notebook PC avec wifi Linksys 802.11b qui marche :)

Hors ligne

#16 Le 29/06/2006, à 00:11

spokieszut

Re : [RESOLU... au calva!] pb cdrom, clé usb, carte son...

udi = '/org/freedesktop/Hal/devices/usb_device_5dc_340_106A78051944071_if0_scsi_host_scsi_device_lun0_scsi_generic'
  info.udi = '/org/freedesktop/Hal/devices/usb_device_5dc_340_106A78051944071_if0_scsi_host_scsi_device_lun0_scsi_generic'
(string)
  linux.device_file = '/dev/sg0'  (string)
  linux.subsystem = 'scsi_generic'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  scsi_generic.device = '/dev/sg0'  (string)
  info.product = 'SCSI Generic Interface'  (string)
  info.capabilities = {'scsi_generic'} (string list)
  info.category = 'scsi_generic'  (string)
  info.parent = '/org/freedesktop/Hal/devices/usb_device_5dc_340_106A78051944071_if0_scsi_host_scsi_device_lun0'  (string)
  linux.sysfs_path = '/sys/class/scsi_generic/sg0'  (string)

udi = '/org/freedesktop/Hal/devices/usb_device_5dc_340_106A78051944071_usbraw'
  info.udi = '/org/freedesktop/Hal/devices/usb_device_5dc_340_106A78051944071_usbraw'  (string)
  linux.device_file = '/dev/bus/usb/005/002'  (string)
  linux.subsystem = 'usb_device'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  usbraw.device = '/dev/bus/usb/005/002'  (string)
  info.product = 'USB Raw Device Access'  (string)
  info.capabilities = {'usbraw'} (string list)
  info.category = 'usbraw'  (string)
  info.parent = '/org/freedesktop/Hal/devices/usb_device_5dc_340_106A78051944071'  (string)
  linux.sysfs_path = '/sys/class/usb_device/usbdev5.2'  (string)

udi = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_1d_7_usbraw'
  info.udi = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_1d_7_usbraw'  (string)
  linux.device_file = '/dev/bus/usb/005/001'  (string)
  linux.subsystem = 'usb_device'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  usbraw.device = '/dev/bus/usb/005/001'  (string)
  info.product = 'USB Raw Device Access'  (string)
  info.capabilities = {'usbraw'} (string list)
  info.category = 'usbraw'  (string)
  info.parent = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_1d_7'  (string)
  linux.sysfs_path = '/sys/class/usb_device/usbdev5.1'  (string)

udi = '/org/freedesktop/Hal/devices/pci_8086_2448'
  info.udi = '/org/freedesktop/Hal/devices/pci_8086_2448'  (string)
  linux.subsystem = 'pci'  (string)
  linux.hotplug_type = 1  (0x1)  (int)
  pci.subsys_product = 'Unknown (0x0000)'  (string)
  pci.subsys_vendor = 'Unknown (0x0000)'  (string)
  info.product = '82801 Mobile PCI Bridge'  (string)
  pci.product = '82801 Mobile PCI Bridge'  (string)
  info.vendor = 'Intel Corporation'  (string)
  pci.vendor = 'Intel Corporation'  (string)
  pci.device_protocol = 1  (0x1)  (int)
  pci.device_subclass = 4  (0x4)  (int)
  pci.device_class = 6  (0x6)  (int)
  pci.subsys_vendor_id = 0  (0x0)  (int)
  pci.subsys_product_id = 0  (0x0)  (int)
  pci.vendor_id = 32902  (0x8086)  (int)
  pci.product_id = 9288  (0x2448)  (int)
  pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1e.0'  (string)
  info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
  info.bus = 'pci'  (string)
  linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:1e.0'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1e.0'  (string)

udi = '/org/freedesktop/Hal/devices/pci_104c_8031'
  info.udi = '/org/freedesktop/Hal/devices/pci_104c_8031'  (string)
  linux.subsystem = 'pci'  (string)
  linux.hotplug_type = 1  (0x1)  (int)
  pci.subsys_product = 'nx6110'  (string)
  pci.subsys_vendor = 'Hewlett-Packard Company'  (string)
  info.product = 'PCIxx21/x515 Cardbus Controller'  (string)
  pci.product = 'PCIxx21/x515 Cardbus Controller'  (string)
  info.vendor = 'Texas Instruments'  (string)
  pci.vendor = 'Texas Instruments'  (string)
  pci.device_protocol = 0  (0x0)  (int)
  pci.device_subclass = 7  (0x7)  (int)
  pci.device_class = 6  (0x6)  (int)
  pci.subsys_vendor_id = 4156  (0x103c)  (int)
  pci.subsys_product_id = 2460  (0x99c)  (int)
  pci.vendor_id = 4172  (0x104c)  (int)
  pci.product_id = 32817  (0x8031)  (int)
  info.linux.driver = 'yenta_cardbus'  (string)
  pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1e.0/0000:02:06.0'  (string)
  info.parent = '/org/freedesktop/Hal/devices/pci_8086_2448'  (string)
  info.bus = 'pci'  (string)
  linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:1e.0/0000:02:06.0'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1e.0/0000:02:06.0'  (string)

udi = '/org/freedesktop/Hal/devices/pci_10ec_8180'
  info.udi = '/org/freedesktop/Hal/devices/pci_10ec_8180'  (string)
  linux.subsystem = 'pci'  (string)
  linux.hotplug_type = 1  (0x1)  (int)
  pci.subsys_product = 'Unknown (0x0019)'  (string)
  pci.subsys_vendor = 'Linksys'  (string)
  info.product = 'RTL8180L 802.11b MAC'  (string)
  pci.product = 'RTL8180L 802.11b MAC'  (string)
  info.vendor = 'Realtek Semiconductor Co., Ltd.'  (string)
  pci.vendor = 'Realtek Semiconductor Co., Ltd.'  (string)
  pci.device_protocol = 0  (0x0)  (int)
  pci.device_subclass = 0  (0x0)  (int)
  pci.device_class = 2  (0x2)  (int)
  pci.subsys_vendor_id = 5943  (0x1737)  (int)
  pci.subsys_product_id = 25  (0x19)  (int)
  pci.vendor_id = 4332  (0x10ec)  (int)
  pci.product_id = 33152  (0x8180)  (int)
  info.linux.driver = 'rtl8180'  (string)
  pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1e.0/0000:02:06.0/0000:03:00.0'  (string)
  info.parent = '/org/freedesktop/Hal/devices/pci_104c_8031'  (string)
  info.bus = 'pci'  (string)
  linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:1e.0/0000:02:06.0/0000:03:00.0'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1e.0/0000:02:06.0/0000:03:00.0'  (string)

udi = '/org/freedesktop/Hal/devices/net_00_24_12_3g_rf_a7'
  info.udi = '/org/freedesktop/Hal/devices/net_00_24_12_3g_rf_a7'  (string)
  linux.subsystem = 'net'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  net.80211.mac_address = 77697379831  (0x12171fedf7)  (uint64)
  info.product = 'WLAN Interface'  (string)
  net.interface_up = true  (bool)
  net.arp_proto_hw_id = 1  (0x1)  (int)
  net.linux.ifindex = 3  (0x3)  (int)
  net.address = '00:12:17:1f:ed:f7'  (string)
  net.interface = 'wlan0'  (string)
  net.physical_device = '/org/freedesktop/Hal/devices/pci_10ec_8180'  (string)
  info.capabilities = {'net', 'net.80211'} (string list)
  info.category = 'net.80211'  (string)
  info.parent = '/org/freedesktop/Hal/devices/pci_10ec_8180'  (string)
  linux.sysfs_path = '/sys/class/net/wlan0'  (string)

udi = '/org/freedesktop/Hal/devices/pci_104c_8032'
  info.udi = '/org/freedesktop/Hal/devices/pci_104c_8032'  (string)
  linux.subsystem = 'pci'  (string)
  linux.hotplug_type = 1  (0x1)  (int)
  pci.subsys_product = 'nx6110'  (string)
  pci.subsys_vendor = 'Hewlett-Packard Company'  (string)
  info.product = 'OHCI Compliant IEEE 1394 Host Controller'  (string)
  pci.product = 'OHCI Compliant IEEE 1394 Host Controller'  (string)
  info.vendor = 'Texas Instruments'  (string)
  pci.vendor = 'Texas Instruments'  (string)
  pci.device_protocol = 16  (0x10)  (int)
  pci.device_subclass = 0  (0x0)  (int)
  pci.device_class = 12  (0xc)  (int)
  pci.subsys_vendor_id = 4156  (0x103c)  (int)
  pci.subsys_product_id = 2460  (0x99c)  (int)
  pci.vendor_id = 4172  (0x104c)  (int)
  pci.product_id = 32 
  info.linux.driver = 'ohci1394'  (string)
  pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1e.0/0000:02:06.2'  (string)
  info.parent = '/org/freedesktop/Hal/devices/pci_8086_2448'  (string)
  info.bus = 'pci'  (string)
  linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:1e.0/0000:02:06.2'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1e.0/0000:02:06.2'  (string)

udi = '/org/freedesktop/Hal/devices/ieee1394_guid_718b500029f929a6'
  info.udi = '/org/freedesktop/Hal/devices/ieee1394_guid_718b500029f929a6'  (string)
  linux.subsystem = 'ieee1394'  (string)
  linux.hotplug_type = 1  (0x1)  (int)
  info.product = 'Unknown (0x718b50)'  (string)
  info.vendor = 'Unknown (0x718b50)'  (string)
  ieee1394.product = 'Unknown (0x718b50)'  (string)
  ieee1394.product_id = 0  (0x0)  (int)
  ieee1394.vendor = 'Unknown (0x718b50)'  (string)
  ieee1394.version = 1  (0x1)  (int)
  ieee1394.specifier_id = 94  (0x5e)  (int)
  ieee1394.vendor_id = 7441232  (0x718b50)  (int)
  ieee1394.guid = 8181721109683055014  (0x718b500029f929a6)  (uint64)
  info.parent = '/org/freedesktop/Hal/devices/pci_104c_8032'  (string)
  info.bus = 'ieee1394'  (string)
  linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:1e.0/0000:02:06.2/fw-host0/718b500029f929a6/718b500029f929a6-0'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1e.0/0000:02:06.2/fw-host0/718b500029f929a6/718b500029f929a6-0'  (string)

udi = '/org/freedesktop/Hal/devices/pci_14e4_170c'
  info.udi = '/org/freedesktop/Hal/devices/pci_14e4_170c'  (string)
  linux.subsystem = 'pci'  (string)
  linux.hotplug_type = 1  (0x1)  (int)
  pci.subsys_product = 'nx6110'  (string)
818  (0x8032)  (int)
  pci.subsys_vendor = 'Hewlett-Packard Company'  (string)
  info.product = 'BCM4401-B0 100Base-TX'  (string)
  pci.product = 'BCM4401-B0 100Base-TX'  (string)
  info.vendor = 'Broadcom Corporation'  (string)
  pci.vendor = 'Broadcom Corporation'  (string)
  pci.device_protocol = 0  (0x0)  (int)
  pci.device_subclass = 0  (0x0)  (int)
  pci.device_class = 2  (0x2)  (int)
  pci.subsys_vendor_id = 4156  (0x103c)  (int)
  pci.subsys_product_id = 2460  (0x99c)  (int)
  pci.vendor_id = 5348  (0x14e4)  (int)
  pci.product_id = 5900  (0x170c)  (int)
  info.linux.driver = 'b44'  (string)
  pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1e.0/0000:02:0e.0'  (string)
  info.parent = '/org/freedesktop/Hal/devices/pci_8086_2448'  (string)
  info.bus = 'pci'  (string)
  linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:1e.0/0000:02:0e.0'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1e.0/0000:02:0e.0'  (string)

udi = '/org/freedesktop/Hal/devices/net_00_14_38_05_36_59'
  info.udi = '/org/freedesktop/Hal/devices/net_00_14_38_05_36_59'  (string)
  linux.subsystem = 'net'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  net.80203.mac_address = 86839211609  (0x1438053659)  (uint64)
  info.product = 'Networking Interface'  (string)
  net.interface_up = false  (bool)
  net.arp_proto_hw_id = 1  (0x1)  (int)
  net.linux.ifindex = 2  (0x2)  (int)
  net.address = '00:14:38:05:36:59'  (string)
  net.interface = 'eth0'  (string)
  net.physical_device = '/org/freedesktop/Hal/devices/pci_14e4_170c'  (string)
  info.capabilities = {'net', 'net.80203'} (string list)
  info.category = 'net.80203'  (string)
  info.parent = '/org/freedesktop/Hal/devices/pci_14e4_170c'  (string)
  linux.sysfs_path = '/sys/class/net/eth0'  (string)

udi = '/org/freedesktop/Hal/devices/pci_8086_266e'
  info.udi = '/org/freedesktop/Hal/devices/pci_8086_266e'  (string)
  linux.subsystem = 'pci'  (string)
  linux.hotplug_type = 1  (0x1)  (int)
  pci.subsys_product = 'nx6110'  (string)
  pci.subsys_vendor = 'Hewlett-Packard Company'  (string)
  info.product = '82801FB/FBM/FR/FW/FRW (ICH6 Family) AC'97 Audio Controller'  (string)
  pci.product = '82801FB/FBM/FR/FW/FRW (ICH6 Family) AC'97 Audio Controller'  (string)
  info.vendor = 'Intel Corporation'  (string)
  pci.vendor = 'Intel Corporation'  (string)
  pci.device_protocol = 0  (0x0)  (int)
  pci.device_subclass = 1  (0x1)  (int)
  pci.device_class = 4  (0x4)  (int)
  pci.subsys_vendor_id = 4156  (0x103c)  (int)
  pci.subsys_product_id = 2460  (0x99c)  (int)
  pci.vendor_id = 32902  (0x8086)  (int)
  pci.product_id = 9838  (0x266e)  (int)
  info.linux.driver = 'Intel ICH'  (string)
  pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1e.2'  (string)
  info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
  info.bus = 'pci'  (string)
  linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:1e.2'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1e.2'  (string)

udi = '/org/freedesktop/Hal/devices/pci_8086_266e_alsa_playback_4'
  info.udi = '/org/freedesktop/Hal/devices/pci_8086_266e_alsa_playback_4'  (string)
  linux.device_file = '/dev/snd/pcmC0D4p'  (string)
  linux.subsystem = 'sound'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  info.product = 'Intel ICH6 - IEC958 ALSA Playback Device'  (string)
  alsa.type = 'playback'  (string)
  alsa.device_id = 'Intel ICH6 - IEC958'  (string)
  alsa.card_id = 'ICH6'  (string)
  alsa.device = 4  (0x4)  (int)
  alsa.card = 0  (0x0)  (int)
  alsa.physical_device = '/org/freedesktop/Hal/devices/pci_8086_266e'  (string)
  info.parent = '/org/freedesktop/Hal/devices/pci_8086_266e'  (string)
  alsa.device_file = '/dev/snd/pcmC0D4p'  (string)
  info.capabilities = {'alsa'} (string list)
  info.category = 'alsa'  (string)
  linux.sysfs_path = '/sys/class/sound/pcmC0D4p'  (string)

udi = '/org/freedesktop/Hal/devices/pci_8086_266e_alsa_capture_3'
  info.udi = '/org/freedesktop/Hal/devices/pci_8086_266e_alsa_capture_3'  (string)
  linux.device_file = '/dev/snd/pcmC0D3c'  (string)
  linux.subsystem = 'sound'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  info.product = 'Intel ICH6 - ADC2 ALSA Capture Device'  (string)
  alsa.type = 'capture'  (string)
  alsa.device_id = 'Intel ICH6 - ADC2'  (string)
  alsa.card_id = 'ICH6'  (string)
  alsa.device = 3  (0x3)  (int)
  alsa.card = 0  (0x0)  (int)
  alsa.physical_device = '/org/freedesktop/Hal/devices/pci_8086_266e'  (string)
  info.parent = '/org/freedesktop/Hal/devices/pci_8086_266e'  (string)
  alsa.device_file = '/dev/snd/pcmC0D3c'  (string)
  info.capabilities = {'alsa'} (string list)
  info.category = 'alsa'  (string)
  linux.sysfs_path = '/sys/class/sound/pcmC0D3c'  (string)

udi = '/org/freedesktop/Hal/devices/pci_8086_266e_alsa_capture_2'
  info.udi = '/org/freedesktop/Hal/devices/pci_8086_266e_alsa_capture_2'  (string)
  linux.device_file = '/dev/snd/pcmC0D2c'  (string)
  linux.subsystem = 'sound'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  info.product = 'Intel ICH6 - MIC2 ADC ALSA Capture Device'  (string)
  alsa.type = 'capture'  (string)
  alsa.device_id = 'Intel ICH6 - MIC2 ADC'  (string)
  alsa.card_id = 'ICH6'  (string)
  alsa.device = 2  (0x2)  (int)
  alsa.card = 0  (0x0)  (int)
  alsa.physical_device = '/org/freedesktop/Hal/devices/pci_8086_266e'  (string)
  info.parent = '/org/freedesktop/Hal/devices/pci_8086_266e'  (string)
  alsa.device_file = '/dev/snd/pcmC0D2c'  (string)
  info.capabilities = {'alsa'} (string list)
  info.category = 'alsa'  (string)
  linux.sysfs_path = '/sys/class/sound/pcmC0D2c'  (string)

udi = '/org/freedesktop/Hal/devices/pci_8086_266e_alsa_capture_1'
  info.udi = '/org/freedesktop/Hal/devices/pci_8086_266e_alsa_capture_1'  (string)
  linux.device_file = '/dev/snd/pcmC0D1c'  (string)
  linux.subsystem = 'sound'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  info.product = 'Intel ICH6 - MIC ADC ALSA Capture Device'  (string)
  alsa.type = 'capture'  (string)
  alsa.device_id = 'Intel ICH6 - MIC ADC'  (string)
  alsa.card_id = 'ICH6'  (string)
  alsa.device = 1  (0x1)  (int)
  alsa.card = 0  (0x0)  (int)
  alsa.physical_device = '/org/freedesktop/Hal/devices/pci_8086_266e'  (string)
  info.parent = '/org/freedesktop/Hal/devices/pci_8086_266e'  (string)
  alsa.device_file = '/dev/snd/pcmC0D1c'  (string)
  info.capabilities = {'alsa'} (string list)
  info.category = 'alsa'  (string)
  linux.sysfs_path = '/sys/class/sound/pcmC0D1c'  (string)

udi = '/org/freedesktop/Hal/devices/pci_8086_266e_oss_pcm_1'
  info.udi = '/org/freedesktop/Hal/devices/pci_8086_266e_oss_pcm_1'  (string)
  linux.device_file = '/dev/adsp'  (string)
  linux.subsystem = 'sound'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  info.product = 'Intel ICH6 OSS PCM Device'  (string)
  oss.type = 'pcm'  (string)
  oss.device = 1  (0x1)  (int)
  oss.device_id = 'Intel ICH6'  (string)
  oss.card_id = 'ICH6'  (string)
  oss.card = 0  (0x0)  (int)
  oss.physical_device = '/org/freedesktop/Hal/devices/pci_8086_266e'  (string)
  info.parent = '/org/freedesktop/Hal/devices/pci_8086_266e'  (string)
  oss.device_file = '/dev/adsp'  (string)
  info.capabilities = {'oss'} (string list)
  info.category = 'oss'  (string)
  linux.sysfs_path = '/sys/class/sound/adsp'  (string)

udi = '/org/freedesktop/Hal/devices/pci_8086_266e_alsa_playback_0'
  info.udi = '/org/freedesktop/Hal/devices/pci_8086_266e_alsa_playback_0'  (string)
  linux.device_file = '/dev/snd/pcmC0D0p'  (string)
  linux.subsystem = 'sound'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  info.product = 'Intel ICH6 ALSA Playback Device'  (string)
  alsa.type = 'playback'  (string)
  alsa.device_id = 'Intel ICH6'  (string)
  alsa.card_id = 'ICH6'  (string)
  alsa.device = 0  (0x0)  (int)
  alsa.card = 0  (0x0)  (int)
  alsa.physical_device = '/org/freedesktop/Hal/devices/pci_8086_266e'  (string)
  info.parent = '/org/freedesktop/Hal/devices/pci_8086_266e'  (string)
  alsa.device_file = '/dev/snd/pcmC0D0p'  (string)
  info.capabilities = {'alsa'} (string list)
  info.category = 'alsa'  (string)
  linux.sysfs_path = '/sys/class/sound/pcmC0D0p'  (string)

udi = '/org/freedesktop/Hal/devices/pci_8086_266e_alsa_capture_0'
  info.udi = '/org/freedesktop/Hal/devices/pci_8086_266e_alsa_capture_0'  (string)
  linux.device_file = '/dev/snd/pcmC0D0c'  (string)
  linux.subsystem = 'sound'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  info.product = 'Intel ICH6 ALSA Capture Device'  (string)
  alsa.type = 'capture'  (string)
  alsa.device_id = 'Intel ICH6'  (string)
  alsa.card_id = 'ICH6'  (string)
  alsa.device = 0  (0x0)  (int)
  alsa.card = 0  (0x0)  (int)
  alsa.physical_device = '/org/freedesktop/Hal/devices/pci_8086_266e'  (string)
  info.parent = '/org/freedesktop/Hal/devices/pci_8086_266e'  (string)
  alsa.device_file = '/dev/snd/pcmC0D0c'  (string)
  info.capabilities = {'alsa'} (string list)
  info.category = 'alsa'  (string)
  linux.sysfs_path = '/sys/class/sound/pcmC0D0c'  (string)

udi = '/org/freedesktop/Hal/devices/pci_8086_266e_oss_pcm_0_0'
  info.udi = '/org/freedesktop/Hal/devices/pci_8086_266e_oss_pcm_0_0'  (string)
  linux.device_file = '/dev/dsp'  (string)
  linux.subsystem = 'sound'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  info.product = 'Intel ICH6 OSS PCM Device'  (string)
  oss.type = 'pcm'  (string)
  oss.device = 0  (0x0)  (int)
  oss.device_id = 'Intel ICH6'  (string)
  oss.card_id = 'ICH6'  (string)
  oss.card = 0  (0x0)  (int)
  oss.physical_device = '/org/freedesktop/Hal/devices/pci_8086_266e'  (string)
  info.parent = '/org/freedesktop/Hal/devices/pci_8086_266e'  (string)
  oss.device_file = '/dev/dsp'  (string)
  info.capabilities = {'oss'} (string list)
  info.category = 'oss'  (string)
  linux.sysfs_path = '/sys/class/sound/dsp'  (string)

udi = '/org/freedesktop/Hal/devices/pci_8086_266e_oss_pcm_0'
  info.udi = '/org/freedesktop/Hal/devices/pci_8086_266e_oss_pcm_0'  (string)
  linux.device_file = '/dev/audio'  (string)
  linux.subsystem = 'sound'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  info.product = 'Intel ICH6 OSS PCM Device'  (string)
  oss.type = 'pcm'  (string)
  oss.device = 0  (0x0)  (int)
  oss.device_id = 'Intel ICH6'  (string)
  oss.card_id = 'ICH6'  (string)
  oss.card = 0  (0x0)  (int)
  oss.physical_device = '/org/freedesktop/Hal/devices/pci_8086_266e'  (string)
  info.parent = '/org/freedesktop/Hal/devices/pci_8086_266e'  (string)
  oss.device_file = '/dev/audio'  (string)
  info.capabilities = {'oss'} (string list)
  info.category = 'oss'  (string)
  linux.sysfs_path = '/sys/class/sound/audio'  (string)

udi = '/org/freedesktop/Hal/devices/pci_8086_266e_alsa_control__1'
  info.udi = '/org/freedesktop/Hal/devices/pci_8086_266e_alsa_control__1'  (string)
  linux.device_file = '/dev/snd/controlC0'  (string)
  linux.subsystem = 'sound'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  info.product = 'ICH6 ALSA Control Device'  (string)
  alsa.card_id = 'ICH6'  (string)
  alsa.type = 'control'  (string)
  alsa.card = 0  (0x0)  (int)
  alsa.physical_device = '/org/freedesktop/Hal/devices/pci_8086_266e'  (string)
  info.parent = '/org/freedesktop/Hal/devices/pci_8086_266e'  (string)
  alsa.device_file = '/dev/snd/controlC0'  (string)
  info.capabilities = {'alsa'} (string list)
  info.category = 'alsa'  (string)
  linux.sysfs_path = '/sys/class/sound/controlC0'  (string)

udi = '/org/freedesktop/Hal/devices/pci_8086_266e_oss_mixer__1'
  info.udi = '/org/freedesktop/Hal/devices/pci_8086_266e_oss_mixer__1'  (string)
  linux.device_file = '/dev/mixer'  (string)
  linux.subsystem = 'sound'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  info.product = 'Intel ICH6 OSS Control Device'  (string)
  oss.type = 'mixer'  (string)
  oss.device_id = 'Intel ICH6'  (string)
  oss.card_id = 'ICH6'  (string)
  oss.card = 0  (0x0)  (int)
  oss.physical_device = '/org/freedesktop/Hal/devices/pci_8086_266e'  (string)
  info.parent = '/org/freedesktop/Hal/devices/pci_8086_266e'  (string)
  oss.device_file = '/dev/mixer'  (string)
  info.capabilities = {'oss'} (string list)
  info.category = 'oss'  (string)
  linux.sysfs_path = '/sys/class/sound/mixer'  (string)


HP Compaq nx6110 Notebook PC avec wifi Linksys 802.11b qui marche :)

Hors ligne

#17 Le 29/06/2006, à 00:11

spokieszut

Re : [RESOLU... au calva!] pb cdrom, clé usb, carte son...

udi = '/org/freedesktop/Hal/devices/pci_8086_266d'
  info.udi = '/org/freedesktop/Hal/devices/pci_8086_266d'  (string)
  linux.subsystem = 'pci'  (string)
  linux.hotplug_type = 1  (0x1)  (int)
  pci.subsys_product = 'nx6110'  (string)
  pci.subsys_vendor = 'Hewlett-Packard Company'  (string)
  info.product = '82801FB/FBM/FR/FW/FRW (ICH6 Family) AC'97 Modem Controller'  (string)
  pci.product = '82801FB/FBM/FR/FW/FRW (ICH6 Family) AC'97 Modem Controller'  (string)
  info.vendor = 'Intel Corporation'  (string)
  pci.vendor = 'Intel Corporation'  (string)
  pci.device_protocol = 0  (0x0)  (int)
  pci.device_subclass = 3  (0x3)  (int)
  pci.device_class = 7  (0x7)  (int)
  pci.subsys_vendor_id = 4156  (0x103c)  (int)
  pci.subsys_product_id = 2460  (0x99c)  (int)
  pci.vendor_id = 32902  (0x8086)  (int)
  pci.product_id = 9837  (0x266d)  (int)
  pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1e.3'  (string)
  info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
  info.bus = 'pci'  (string)
  linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:1e.3'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1e.3'  (string)

udi = '/org/freedesktop/Hal/devices/pci_8086_2641'
  info.udi = '/org/freedesktop/Hal/devices/pci_8086_2641'  (string)
  linux.subsystem = 'pci'  (string)
  linux.hotplug_type = 1  (0x1)  (int)
  pci.subsys_product = 'nx6110'  (string)
  pci.subsys_vendor = 'Hewlett-Packard Company'  (string)
  info.product = '82801FBM (ICH6M) LPC Interface Bridge'  (string)
  pci.product = '82801FBM (ICH6M) LPC Interface Bridge'  (string)
  info.vendor = 'Intel Corporation'  (string)
  pci.vendor = 'Intel Corporation'  (string)
  pci.device_protocol = 0  (0x0)  (int)
  pci.device_subclass = 1  (0x1)  (int)
  pci.device_class = 6  (0x6)  (int)
  pci.subsys_vendor_id = 4156  (0x103c)  (int)
  pci.subsys_product_id = 2460  (0x99c)  (int)
  pci.vendor_id = 32902  (0x8086)  (int)
  pci.product_id = 9793  (0x2641)  (int)
  pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1f.0'  (string)
  info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
  info.bus = 'pci'  (string)
  linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:1f.0'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1f.0'  (string)

udi = '/org/freedesktop/Hal/devices/pci_8086_266f'
  info.udi = '/org/freedesktop/Hal/devices/pci_8086_266f'  (string)
  linux.subsystem = 'pci'  (string)
  linux.hotplug_type = 1  (0x1)  (int)
  pci.subsys_product = 'nx6110'  (string)
  pci.subsys_vendor = 'Hewlett-Packard Company'  (string)
  info.product = '82801FB/FBM/FR/FW/FRW (ICH6 Family) IDE Controller'  (string)
  pci.product = '82801FB/FBM/FR/FW/FRW (ICH6 Family) IDE Controller'  (string)
  info.vendor = 'Intel Corporation'  (string)
  pci.vendor = 'Intel Corporation'  (string)
  pci.device_protocol = 138  (0x8a)  (int)
  pci.device_subclass = 1  (0x1)  (int)
  pci.device_class = 1  (0x1)  (int)
  pci.subsys_vendor_id = 4156  (0x103c)  (int)
  pci.subsys_product_id = 2460  (0x99c)  (int)
  pci.vendor_id = 32902  (0x8086)  (int)
  pci.product_id = 9839  (0x266f)  (int)
  info.linux.driver = 'PIIX_IDE'  (string)
  pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1f.1'  (string)
  info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
  info.bus = 'pci'  (string)
  linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:1f.1'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1f.1'  (string)

udi = '/org/freedesktop/Hal/devices/pci_8086_266f_ide_0_0'
  info.udi = '/org/freedesktop/Hal/devices/pci_8086_266f_ide_0_0'  (string)
  linux.subsystem = 'ide'  (string)
  linux.hotplug_type = 1  (0x1)  (int)
  info.product = 'IDE device (master)'  (string)
  ide.channel = 0  (0x0)  (int)
  ide.host = 0  (0x0)  (int)
  info.linux.driver = 'ide-disk'  (string)
  info.parent = '/org/freedesktop/Hal/devices/pci_8086_266f'  (string)
  info.bus = 'ide'  (string)
  linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:1f.1/ide0/0.0'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1f.1/ide0/0.0'  (string)

udi = '/org/freedesktop/Hal/devices/storage_serial_556T4725T'
  storage.policy.should_mount = false  (bool)
  block.storage_device = '/org/freedesktop/Hal/devices/storage_serial_556T4725T'  (string)
  info.udi = '/org/freedesktop/Hal/devices/storage_serial_556T4725T'  (string)
  storage.requires_eject = false  (bool)
  storage.hotpluggable = false  (bool)
  info.capabilities = {'storage', 'block'} (string list)
  info.category = 'storage'  (string)
  info.product = 'TOSHIBA MK4026GAX'  (string)
  storage.removable = false  (bool)
  storage.physical_device = '/org/freedesktop/Hal/devices/pci_8086_266f_ide_0_0'  (string)
  storage.firmware_version = 'PA103G'  (string)
  storage.serial = '556T4725T'  (string)
  storage.vendor = ''  (string)
  storage.model = 'TOSHIBA MK4026GAX'  (string)
  storage.drive_type = 'disk'  (string)
  storage.automount_enabled_hint = true  (bool)
  storage.media_check_enabled = false  (bool)
  storage.no_partitions_hint = false  (bool)
  storage.bus = 'ide'  (string)
  block.is_volume = false  (bool)
  block.minor = 0  (0x0)  (int)
  block.major = 3  (0x3)  (int)
  block.device = '/dev/hda'  (string)
  linux.hotplug_type = 3  (0x3)  (int)
  info.parent = '/org/freedesktop/Hal/devices/pci_8086_266f_ide_0_0'  (string)
  linux.sysfs_path_device = '/sys/block/hda'  (string)
  linux.sysfs_path = '/sys/block/hda'  (string)

udi = '/org/freedesktop/Hal/devices/volume_uuid_A82CA0712CA03BE6'
  volume.unmount.valid_options = {'lazy'} (string list)
  volume.mount.valid_options = {'ro', 'sync', 'dirsync', 'noatime', 'nodiratime', 'noexec', 'quiet'} (string list)
  org.freedesktop.Hal.Device.Volume.method_execpaths = {'hal-system-storage-mount', 'hal-system-storage-unmount', 'hal-system-storage-eject'} (string list)
  org.freedesktop.Hal.Device.Volume.method_signatures = {'ssas', 'as', 'as'} (string list)
  org.freedesktop.Hal.Device.Volume.method_names = {'Mount', 'Unmount', 'Eject'} (string list)
  info.interfaces = {'org.freedesktop.Hal.Device.Volume'} (string list)
  volume.ignore = true  (bool)
  volume.policy.desired_mount_point = 'Systema'  (string)
  volume.policy.mount_filesystem = 'ntfs'  (string)
  volume.policy.should_mount = true  (bool)
  info.udi = '/org/freedesktop/Hal/devices/volume_uuid_A82CA0712CA03BE6'  (string)
  volume.partition.msdos_part_table_type = 7  (0x7)  (int)
  info.product = 'Systema'  (string)
  volume.size = 10489618944  (0x2713ae200)  (uint64)
  volume.num_blocks = 20487537  (0x1389d71)  (int)
  volume.block_size = 512  (0x200)  (int)
  volume.partition.number = 1  (0x1)  (int)
  info.capabilities = {'volume', 'block'} (string list)
  info.category = 'volume'  (string)
  volume.is_partition = true  (bool)
  volume.is_disc = false  (bool)
  volume.is_mounted_read_only = false  (bool)
  volume.is_mounted = false  (bool)
  volume.mount_point = ''  (string)
  volume.label = 'Systema'  (string)
  volume.uuid = 'A82CA0712CA03BE6'  (string)
  volume.fsversion = '3.1'  (string)
  volume.fsusage = 'filesystem'  (string)
  volume.fstype = 'ntfs'  (string)
  storage.model = ''  (string)
  block.storage_device = '/org/freedesktop/Hal/devices/storage_serial_556T4725T'  (string)
  block.is_volume = true  (bool)
  block.minor = 1  (0x1)  (int)
  block.major = 3  (0x3)  (int)
  block.device = '/dev/hda1'  (string)
  linux.hotplug_type = 3  (0x3)  (int)
  info.parent = '/org/freedesktop/Hal/devices/storage_serial_556T4725T'  (string)
  linux.sysfs_path_device = '/sys/block/hda/hda1'  (string)
  linux.sysfs_path = '/sys/block/hda/hda1'  (string)

udi = '/org/freedesktop/Hal/devices/volume_part2_size_1024'
  info.udi = '/org/freedesktop/Hal/devices/volume_part2_size_1024'  (string)
  volume.partition.msdos_part_table_type = 15  (0xf)  (int)
  info.product = 'Volume'  (string)
  volume.size = 1024  (0x400)  (uint64)
  volume.num_blocks = 2  (0x2)  (int)
  volume.block_size = 512  (0x200)  (int)
  volume.partition.number = 2  (0x2)  (int)
  info.capabilities = {'volume', 'block'} (string list)
  info.category = 'volume'  (string)
  volume.is_partition = true  (bool)
  volume.is_disc = false  (bool)
  volume.is_mounted_read_only = false  (bool)
  volume.is_mounted = false  (bool)
  volume.mount_point = ''  (string)
  volume.label = ''  (string)
  volume.uuid = ''  (string)
  volume.fsversion = ''  (string)
  volume.fsusage = ''  (string)
  volume.fstype = ''  (string)
  storage.model = ''  (string)
  block.storage_device = '/org/freedesktop/Hal/devices/storage_serial_556T4725T'  (string)
  block.is_volume = true  (bool)
  block.minor = 2  (0x2)  (int)
  block.major = 3  (0x3)  (int)
  block.device = '/dev/hda2'  (string)
  linux.hotplug_type = 3  (0x3)  (int)
  info.parent = '/org/freedesktop/Hal/devices/storage_serial_556T4725T'  (string)
  linux.sysfs_path_device = '/sys/block/hda/hda2'  (string)
  linux.sysfs_path = '/sys/block/hda/hda2'  (string)

udi = '/org/freedesktop/Hal/devices/volume_uuid_4459_51EF'
  volume.unmount.valid_options = {'lazy'} (string list)
  volume.mount.valid_options = {'ro', 'sync', 'dirsync', 'noatime', 'nodiratime', 'noexec', 'quiet', 'utf8', 'shortname=', 'codepage=', 'iocharset=', 'umask=', 'dmask=', 'fmask=', 'uid='} (string list)
  org.freedesktop.Hal.Device.Volume.method_execpaths = {'hal-system-storage-mount', 'hal-system-storage-unmount', 'hal-system-storage-eject'} (string list)
  org.freedesktop.Hal.Device.Volume.method_signatures = {'ssas', 'as', 'as'} (string list)
  org.freedesktop.Hal.Device.Volume.method_names = {'Mount', 'Unmount', 'Eject'} (string list)
  info.interfaces = {'org.freedesktop.Hal.Device.Volume'} (string list)
  volume.ignore = false  (bool)
  volume.policy.desired_mount_point = 'DATOS'  (string)
  volume.policy.mount_filesystem = 'vfat'  (string)
  volume.policy.should_mount = true  (bool)
  volume.policy.mount_option.quiet = true  (bool)
  volume.policy.mount_option.iocharset=utf8 = true  (bool)
  info.udi = '/org/freedesktop/Hal/devices/volume_uuid_4459_51EF'  (string)
  volume.partition.msdos_part_table_type = 11  (0xb)  (int)
  info.product = 'DATOS'  (string)
  volume.size = 20971528704  (0x4e2002200)  (uint64)
  volume.num_blocks = 40960017  (0x2710011)  (int)
  volume.block_size = 512  (0x200)  (int)
  volume.partition.number = 5  (0x5)  (int)
  info.capabilities = {'volume', 'block'} (string list)
  info.category = 'volume'  (string)
  volume.is_partition = true  (bool)
  volume.is_disc = false  (bool)
  volume.is_mounted_read_only = false  (bool)
  volume.is_mounted = true  (bool)
  volume.mount_point = '/media/datos'  (string)
  volume.label = 'DATOS'  (string)
  volume.uuid = '4459-51EF'  (string)
  volume.fsversion = 'FAT32'  (string)
  volume.fsusage = 'filesystem'  (string)
  volume.fstype = 'vfat'  (string)
  storage.model = ''  (string)
  block.storage_device = '/org/freedesktop/Hal/devices/storage_serial_556T4725T'  (string)
  block.is_volume = true  (bool)
  block.minor = 5  (0x5)  (int)
  block.major = 3  (0x3)  (int)
  block.device = '/dev/hda5'  (string)
  linux.hotplug_type = 3  (0x3)  (int)
  info.parent = '/org/freedesktop/Hal/devices/storage_serial_556T4725T'  (string)
  linux.sysfs_path_device = '/sys/block/hda/hda5'  (string)
  linux.sysfs_path = '/sys/block/hda/hda5'  (string)

udi = '/org/freedesktop/Hal/devices/volume_part6_size_764918784'
  info.udi = '/org/freedesktop/Hal/devices/volume_part6_size_764918784'  (string)
  volume.partition.msdos_part_table_type = 130  (0x82)  (int)
  info.product = 'Volume (swap)'  (string)
  volume.size = 764918784  (0x2d97bc00)  (uint64)
  volume.num_blocks = 1493982  (0x16cbde)  (int)
  volume.block_size = 512  (0x200)  (int)
  volume.partition.number = 6  (0x6)  (int)
  info.capabilities = {'volume', 'block'} (string list)
  info.category = 'volume'  (string)
  volume.is_partition = true  (bool)
  volume.is_disc = false  (bool)
  volume.is_mounted_read_only = false  (bool)
  volume.is_mounted = false  (bool)
  volume.mount_point = ''  (string)
  volume.label = ''  (string)
  volume.uuid = ''  (string)
  volume.fsversion = '2'  (string)
  volume.fsusage = 'other'  (string)
  volume.fstype = 'swap'  (string)
  storage.model = ''  (string)
  block.storage_device = '/org/freedesktop/Hal/devices/storage_serial_556T4725T'  (string)
  block.is_volume = true  (bool)
  block.minor = 6  (0x6)  (int)
  block.major = 3  (0x3)  (int)
  block.device = '/dev/hda6'  (string)
  linux.hotplug_type = 3  (0x3)  (int)
  info.parent = '/org/freedesktop/Hal/devices/storage_serial_556T4725T'  (string)
  linux.sysfs_path_device = '/sys/block/hda/hda6'  (string)
  linux.sysfs_path = '/sys/block/hda/hda6'  (string)

udi = '/org/freedesktop/Hal/devices/volume_uuid_fb41815e_5f30_439c_99e5_fca1911c611f'
  volume.unmount.valid_options = {'lazy'} (string list)
  volume.mount.valid_options = {'ro', 'sync', 'dirsync', 'noatime', 'nodiratime', 'noexec', 'quiet', 'data='} (string list)
  org.freedesktop.Hal.Device.Volume.method_execpaths = {'hal-system-storage-mount', 'hal-system-storage-unmount', 'hal-system-storage-eject'} (string list)
  org.freedesktop.Hal.Device.Volume.method_signatures = {'ssas', 'as', 'as'} (string list)
  org.freedesktop.Hal.Device.Volume.method_names = {'Mount', 'Unmount', 'Eject'} (string list)
  info.interfaces = {'org.freedesktop.Hal.Device.Volume'} (string list)
  volume.ignore = true  (bool)
  volume.policy.desired_mount_point = 'idedisk'  (string)
  volume.policy.mount_filesystem = 'ext3'  (string)
  volume.policy.should_mount = true  (bool)
  info.udi = '/org/freedesktop/Hal/devices/volume_uuid_fb41815e_5f30_439c_99e5_fca1911c611f'  (string)
  volume.partition.msdos_part_table_type = 131  (0x83)  (int)
  info.product = '/'  (string)
  volume.size = 7781082624  (0x1cfc9e600)  (uint64)
  volume.num_blocks = 15197427  (0xe7e4f3)  (int)
  volume.block_size = 512  (0x200)  (int)
  volume.partition.number = 7  (0x7)  (int)
  info.capabilities = {'volume', 'block'} (string list)
  info.category = 'volume'  (string)
  volume.is_partition = true  (bool)
  volume.is_disc = false  (bool)
  volume.is_mounted_read_only = false  (bool)
  volume.is_mounted = true  (bool)
  volume.mount_point = '/'  (string)
  volume.label = '/'  (string)
  volume.uuid = 'fb41815e-5f30-439c-99e5-fca1911c611f'  (string)
  volume.fsversion = '1.0'  (string)
  volume.fsusage = 'filesystem'  (string)
  volume.fstype = 'ext3'  (string)
  storage.model = ''  (string)
  block.storage_device = '/org/freedesktop/Hal/devices/storage_serial_556T4725T'  (string)
  block.is_volume = true  (bool)
  block.minor = 7  (0x7)  (int)
  block.major = 3  (0x3)  (int)
  block.device = '/dev/hda7'  (string)
  linux.hotplug_type = 3  (0x3)  (int)
  info.parent = '/org/freedesktop/Hal/devices/storage_serial_556T4725T'  (string)
  linux.sysfs_path_device = '/sys/block/hda/hda7'  (string)
  linux.sysfs_path = '/sys/block/hda/hda7'  (string)

udi = '/org/freedesktop/Hal/devices/pci_8086_266f_ide_0_1'
  info.udi = '/org/freedesktop/Hal/devices/pci_8086_266f_ide_0_1'  (string)
  linux.subsystem = 'ide'  (string)
  linux.hotplug_type = 1  (0x1)  (int)
  info.product = 'IDE device (slave)'  (string)
  ide.channel = 1  (0x1)  (int)
  ide.host = 0  (0x0)  (int)
  info.linux.driver = 'ide-cdrom'  (string)
  info.parent = '/org/freedesktop/Hal/devices/pci_8086_266f'  (string)
  info.bus = 'ide'  (string)
  linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:1f.1/ide0/0.1'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1f.1/ide0/0.1'  (string)

udi = '/org/freedesktop/Hal/devices/storage_model_SONY_CD_RW/DVD_ROM_CRX835E'
  info.addons = {'hald-addon-storage', 'hald-addon-storage'} (string list)
  storage.policy.desired_mount_point = 'cdrecorder'  (string)
  storage.policy.mount_filesystem = 'auto'  (string)
  storage.policy.should_mount = true  (bool)
  block.storage_device = '/org/freedesktop/Hal/devices/storage_model_SONY_CD_RW/DVD_ROM_CRX835E'  (string)  info.udi = '/org/freedesktop/Hal/devices/storage_model_SONY_CD_RW/DVD_ROM_CRX835E'  (string)
  storage.cdrom.write_speed = 0  (0x0)  (int)
  storage.cdrom.read_speed = 8310  (0x2076)  (int)
  storage.cdrom.support_media_changed = true  (bool)
  storage.cdrom.hddvdrw = false  (bool)
  storage.cdrom.hddvdr = false  (bool)
  storage.cdrom.hddvd = false  (bool)
  storage.cdrom.bdre = false  (bool)
  storage.cdrom.bdr = false  (bool)
  storage.cdrom.bd = false  (bool)
  storage.cdrom.dvdplusrdl = false  (bool)
  storage.cdrom.dvdplusrw = false  (bool)
  storage.cdrom.dvdplusr = false  (bool)
  storage.cdrom.dvdram = false  (bool)
  storage.cdrom.dvdrw = false  (bool)
  storage.cdrom.dvdr = false  (bool)
  storage.cdrom.dvd = true  (bool)
  storage.cdrom.cdrw = true  (bool)
  storage.cdrom.cdr = true  (bool)
  storage.requires_eject = true  (bool)
  storage.hotpluggable = false  (bool)
  info.capabilities = {'storage', 'block', 'storage.cdrom'} (string list)
  info.category = 'storage'  (string)
  info.product = 'SONY CD-RW/DVD-ROM CRX835E'  (string)
  storage.removable = true  (bool)
  storage.physical_device = '/org/freedesktop/Hal/devices/pci_8086_266f_ide_0_1'  (string)
  storage.firmware_version = 'KPK4'  (string)
  storage.vendor = ''  (string)
  storage.model = 'SONY CD-RW/DVD-ROM CRX835E'  (string)
  storage.drive_type = 'cdrom'  (string)
  storage.automount_enabled_hint = true  (bool)
  storage.media_check_enabled = true  (bool)
  storage.no_partitions_hint = true  (bool)
  storage.bus = 'ide'  (string)
  block.is_volume = false  (bool)
  block.minor = 64  (0x40)  (int)
  block.major = 3  (0x3)  (int)
  block.device = '/dev/hdb'  (string)
  linux.hotplug_type = 3  (0x3)  (int)
  info.parent = '/org/freedesktop/Hal/devices/pci_8086_266f_ide_0_1'  (string)
  linux.sysfs_path_device = '/sys/block/hdb'  (string)
  linux.sysfs_path = '/sys/block/hdb'  (string)

udi = '/org/freedesktop/Hal/devices/volume_label_New'
  volume.unmount.valid_options = {'lazy'} (string list)
  volume.mount.valid_options = {'ro', 'sync', 'dirsync', 'noatime', 'nodiratime', 'noexec', 'quiet', 'utf8', 'uid=', 'mode=', 'iocharset='} (string list)
  org.freedesktop.Hal.Device.Volume.method_execpaths = {'hal-system-storage-mount', 'hal-system-storage-unmount', 'hal-system-storage-eject'} (string list)
  org.freedesktop.Hal.Device.Volume.method_signatures = {'ssas', 'as', 'as'} (string list)
  org.freedesktop.Hal.Device.Volume.method_names = {'Mount', 'Unmount', 'Eject'} (string list)
  info.interfaces = {'org.freedesktop.Hal.Device.Volume'} (string list)
  volume.ignore = false  (bool)
  volume.policy.desired_mount_point = 'cdrecorder'  (string)
  volume.policy.mount_option.utf8 = true  (bool)
  info.udi = '/org/freedesktop/Hal/devices/volume_label_New'  (string)
  info.product = 'New'  (string)
  volume.disc.capacity = 4689264640  (0x117808000)  (uint64)
  volume.disc.is_svcd = false  (bool)
  volume.disc.is_vcd = false  (bool)
  volume.disc.is_videodvd = false  (bool)
  volume.disc.is_rewritable = false  (bool)
  volume.disc.is_appendable = false  (bool)
  volume.disc.is_blank = false  (bool)
  volume.disc.has_data = true  (bool)
  volume.disc.has_audio = false  (bool)
  volume.disc.type = 'dvd_rom'  (string)
  volume.size = 4689264640  (0x117808000)  (uint64)
  volume.num_blocks = 9158720  (0x8bc040)  (int)
  volume.block_size = 2048  (0x800)  (int)
  info.capabilities = {'volume', 'block'} (string list)
  info.category = 'volume'  (string)
  volume.is_partition = true  (bool)
  volume.is_disc = true  (bool)
  volume.is_mounted_read_only = true  (bool)
  volume.is_mounted = true  (bool)
  volume.mount_point = '/media/cdrom0'  (string)
  volume.label = 'New'  (string)
  volume.uuid = ''  (string)
  volume.fsversion = 'Joliet Extension'  (string)
  volume.fsusage = 'filesystem'  (string)
  volume.fstype = 'iso9660'  (string)
  storage.model = ''  (string)
  block.storage_device = '/org/freedesktop/Hal/devices/storage_model_SONY_CD_RW/DVD_ROM_CRX835E'  (string)  block.is_volume = true  (bool)
  block.minor = 64  (0x40)  (int)
  block.major = 3  (0x3)  (int)
  block.device = '/dev/hdb'  (string)
  linux.hotplug_type = 3  (0x3)  (int)
  info.parent = '/org/freedesktop/Hal/devices/storage_model_SONY_CD_RW/DVD_ROM_CRX835E'  (string)
  linux.sysfs_path_device = '/sys/block/hdb/fakevolume'  (string)
  linux.sysfs_path = '/sys/block/hdb/fakevolume'  (string)

udi = '/org/freedesktop/Hal/devices/pnp_PNP0c01'
  info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0c01'  (string)
  linux.subsystem = 'pnp'  (string)
  linux.hotplug_type = 1  (0x1)  (int)
  info.product = 'System Board'  (string)
  pnp.description = 'System Board'  (string)
  pnp.id = 'PNP0c01'  (string)
  info.linux.driver = 'system'  (string)
  info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
  info.bus = 'pnp'  (string)
  linux.sysfs_path_device = '/sys/devices/pnp0/00:00'  (string)
  linux.sysfs_path = '/sys/devices/pnp0/00:00'  (string)

udi = '/org/freedesktop/Hal/devices/pnp_PNP0a06'
  info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0a06'  (string)
  linux.subsystem = 'pnp'  (string)
  linux.hotplug_type = 1  (0x1)  (int)
  info.product = 'Generic ACPI Extended-IO Bus (EIO bus)'  (string)
  pnp.description = 'Generic ACPI Extended-IO Bus (EIO bus)'  (string)
  pnp.id = 'PNP0a06'  (string)
  info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
  info.bus = 'pnp'  (string)
  linux.sysfs_path_device = '/sys/devices/pnp0/00:01'  (string)
  linux.sysfs_path = '/sys/devices/pnp0/00:01'  (string)

udi = '/org/freedesktop/Hal/devices/pnp_PNP0c04'
  info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0c04'  (string)
  linux.subsystem = 'pnp'  (string)
  linux.hotplug_type = 1  (0x1)  (int)
  info.product = 'Math Coprocessor'  (string)
  pnp.description = 'Math Coprocessor'  (string)
  pnp.id = 'PNP0c04'  (string)
  info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
  info.bus = 'pnp'  (string)
  linux.sysfs_path_device = '/sys/devices/pnp0/00:02'  (string)
  linux.sysfs_path = '/sys/devices/pnp0/00:02'  (string)

udi = '/org/freedesktop/Hal/devices/pnp_PNP0200'
  info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0200'  (string)
  linux.subsystem = 'pnp'  (string)
  linux.hotplug_type = 1  (0x1)  (int)
  info.product = 'AT DMA Controller'  (string)
  pnp.description = 'AT DMA Controller'  (string)
  pnp.id = 'PNP0200'  (string)
  info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
  info.bus = 'pnp'  (string)
  linux.sysfs_path_device = '/sys/devices/pnp0/00:03'  (string)
  linux.sysfs_path = '/sys/devices/pnp0/00:03'  (string)

udi = '/org/freedesktop/Hal/devices/pnp_PNP0800'
  info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0800'  (string)
  linux.subsystem = 'pnp'  (string)
  linux.hotplug_type = 1  (0x1)  (int)
  info.product = 'AT-style speaker sound'  (string)
  pnp.description = 'AT-style speaker sound'  (string)
  pnp.id = 'PNP0800'  (string)
  info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
  info.bus = 'pnp'  (string)
  linux.sysfs_path_device = '/sys/devices/pnp0/00:04'  (string)
  linux.sysfs_path = '/sys/devices/pnp0/00:04'  (string)

udi = '/org/freedesktop/Hal/devices/pnp_PNP0b00'
  info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0b00'  (string)
  linux.subsystem = 'pnp'  (string)
  linux.hotplug_type = 1  (0x1)  (int)
  info.product = 'AT Real-Time Clock'  (string)
  pnp.description = 'AT Real-Time Clock'  (string)
  pnp.id = 'PNP0b00'  (string)
  info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
  info.bus = 'pnp'  (string)
  linux.sysfs_path_device = '/sys/devices/pnp0/00:05'  (string)
  linux.sysfs_path = '/sys/devices/pnp0/00:05'  (string)

udi = '/org/freedesktop/Hal/devices/pnp_PNP0303'
  info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0303'  (string)
  linux.subsystem = 'pnp'  (string)
  linux.hotplug_type = 1  (0x1)  (int)
  info.product = 'IBM Enhanced (101/102-key, PS/2 mouse support)'  (string)
  pnp.description = 'IBM Enhanced (101/102-key, PS/2 mouse support)'  (string)
  pnp.id = 'PNP0303'  (string)
  info.linux.driver = 'i8042 kbd'  (string)
  info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
  info.bus = 'pnp'  (string)
  linux.sysfs_path_device = '/sys/devices/pnp0/00:06'  (string)
  linux.sysfs_path = '/sys/devices/pnp0/00:06'  (string)

udi = '/org/freedesktop/Hal/devices/pnp_SYN0112'
  info.udi = '/org/freedesktop/Hal/devices/pnp_SYN0112'  (string)
  linux.subsystem = 'pnp'  (string)
  linux.hotplug_type = 1  (0x1)  (int)
  info.product = 'PnP Device (SYN0112)'  (string)
  pnp.id = 'SYN0112'  (string)
  info.linux.driver = 'i8042 aux'  (string)
  info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
  info.bus = 'pnp'  (string)
  linux.sysfs_path_device = '/sys/devices/pnp0/00:07'  (string)
  linux.sysfs_path = '/sys/devices/pnp0/00:07'  (string)

udi = '/org/freedesktop/Hal/devices/pnp_PNP0c02_1'
  info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0c02_1'  (string)
  linux.subsystem = 'pnp'  (string)
  linux.hotplug_type = 1  (0x1)  (int)
  info.product = 'General ID for reserving resources required by PnP motherboard registers. (Not device specific.)'  (string)
  pnp.description = 'General ID for reserving resources required by PnP motherboard registers. (Not device specific.)'  (string)
  pnp.id = 'PNP0c02'  (string)
  info.linux.driver = 'system'  (string)
  info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
  info.bus = 'pnp'  (string)
  linux.sysfs_path_device = '/sys/devices/pnp0/00:08'  (string)
  linux.sysfs_path = '/sys/devices/pnp0/00:08'  (string)

udi = '/org/freedesktop/Hal/devices/pnp_PNP0c02_0'
  info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0c02_0'  (string)
  linux.subsystem = 'pnp'  (string)
  linux.hotplug_type = 1  (0x1)  (int)
  info.product = 'General ID for reserving resources required by PnP motherboard registers. (Not device specific.)'  (string)
  pnp.description = 'General ID for reserving resources required by PnP motherboard registers. (Not device specific.)'  (string)
  pnp.id = 'PNP0c02'  (string)
  info.linux.driver = 'system'  (string)
  info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
  info.bus = 'pnp'  (string)
  linux.sysfs_path_device = '/sys/devices/pnp0/00:09'  (string)
  linux.sysfs_path = '/sys/devices/pnp0/00:09'  (string)

udi = '/org/freedesktop/Hal/devices/pnp_PNP0c14'
  info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0c14'  (string)
  linux.subsystem = 'pnp'  (string)
  linux.hotplug_type = 1  (0x1)  (int)
  info.product = 'PnP Device (PNP0c14)'  (string)
  pnp.id = 'PNP0c14'  (string)
  info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
  info.bus = 'pnp'  (string)
  linux.sysfs_path_device = '/sys/devices/pnp0/00:0a'  (string)
  linux.sysfs_path = '/sys/devices/pnp0/00:0a'  (string)

udi = '/org/freedesktop/Hal/devices/pnp_PNP0c02'
  info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0c02'  (string)
  linux.subsystem = 'pnp'  (string)
  linux.hotplug_type = 1  (0x1)  (int)
  info.product = 'General ID for reserving resources required by PnP motherboard registers. (Not device specific.)'  (string)
  pnp.description = 'General ID for reserving resources required by PnP motherboard registers. (Not device specific.)'  (string)
  pnp.id = 'PNP0c02'  (string)
  info.linux.driver = 'system'  (string)
  info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
  info.bus = 'pnp'  (string)
  linux.sysfs_path_device = '/sys/devices/pnp0/00:0b'  (string)
  linux.sysfs_path = '/sys/devices/pnp0/00:0b'  (string)


Dumped 106 device(s) from the Global Device List.
------------------------------------------------


HP Compaq nx6110 Notebook PC avec wifi Linksys 802.11b qui marche :)

Hors ligne

#18 Le 29/06/2006, à 00:22

spokieszut

Re : [RESOLU... au calva!] pb cdrom, clé usb, carte son...

bon voila raspouille, smile
j'ai appris 2 nouvelles simpatiques comandes, et devrait savoir tout de tout de mon matos maitenant (et tous ceux qui viendrons par ici aussi d'ailleurs roll).

3 ptites questions:
comment fait le système pour reconnaitre la clef usb, savoir son nom, son mode de formatage... et cela sans pouvoir la monter ? neutral
deusio; ben j'ai mis la Dapper ya de cela un pti moment quand meme (ça devait etre le 3 ou 4 juin wink ); alors si c de cela, pourquoi des pbs maitenant ? hmm
(ça a marché du tonnerre jusque là).
tersio, bon, je veux bien reformater mon truc si c vraiment l'ultime soluce, mais comment je devrais nikel bien formater ?
(moi j'avais fait cela avec le cd d'install, apres une install windobe, une partoche format FAT32 pour des data; une swap, et une dernière etc pour la ubuntu avec le reste. Bon je sais, c mieux de faire quelques autres genre /; /home; et autres  mais bon... Quesque j'ai pu merder bordel dans mon formatage ?? neutral

merci en tout cas de prendre du temps pour moi.
je sais, jsuis casse pied; j'aime comprendre. tongue
(sinon d'ailleurs, je serais ni ici, ni sous linux)

Spok:

Dernière modification par spokieszut (Le 29/06/2006, à 00:25)


HP Compaq nx6110 Notebook PC avec wifi Linksys 802.11b qui marche :)

Hors ligne

#19 Le 29/06/2006, à 00:29

raspouille

Re : [RESOLU... au calva!] pb cdrom, clé usb, carte son...

/dev/hda7 on / type ext3 (rw,errors=remount-ro)
& sudo fdisk dev/hda7
(bis)apparement,il y aurai un probleme sur le disque dur,attention j'ai eu pas mal de problemes apres un mauvais formatage.moi je reformaterai nickel,et une install propre de dapper ou breezy.
@+

Dernière modification par raspouille (Le 29/06/2006, à 00:31)


Linux Mint Mate 17.3 GNU/Linux.

Hors ligne

#20 Le 29/06/2006, à 01:46

spokieszut

Re : [RESOLU... au calva!] pb cdrom, clé usb, carte son...

seb@ubuspokie:~$ sudo fdisk /dev/hda7
Le périphérique ne contient ni une partition ni une étiquette DOS, Sun, SGI ou OS F
Création d'une nouvelle étiquette DOS. Les modifications resteront en mémoire
jusqu'à ce qu'elles soient écrites. Après quoi, bien sûr, le contenu précédent
ne sera par récupérable.


Le nombre de cylindres pour ce disque est initialisé à 15076.
Il n'y a rien d''incorrect avec cela, mais c'est plus grand que 1024,
et cela pourrait causer des problèmes en fonction pour certaines configurations:
1) logiciels qui sont exécutés à l'amorçage (i.e., vieilles versions de LILO)
2) logiciels d'amorçage et de partitionnement pour d'autres SE
   (i.e., DOS FDISK, OS/2 FDISK)
AVERTISSEMENT: fanion 0x0000 invalide de la table de partitions 4 sera corrigé pa r w(écriture)
Commande (m pour l'aide): p

Disque /dev/hda7: 7781 Mo, 7781082624 octets
16 têtes, 63 secteurs/piste, 15076 cylindres
Unités = cylindres de 1008 * 512 = 516096 octets

Périphérique Amorce    Début         Fin      Blocs    Id  Système


HP Compaq nx6110 Notebook PC avec wifi Linksys 802.11b qui marche :)

Hors ligne

#21 Le 29/06/2006, à 01:52

spokieszut

Re : [RESOLU... au calva!] pb cdrom, clé usb, carte son...

ok raspouille, mais dis moi le rw,errors=remount-ro, c pas parceque c'est ce que j'ai mis dans le fstab qu'il dis ça ?? (voir mon fstab dans mon 1er message) roll

S.

PS: Commande (m pour l'aide): q
PPS: comment ça peux se faire un mauvais formatage ??
(moi j'ai bêtement utilisé un CD d'install... quand meme, merde !) neutral
PPPS: à defaut; comment fais-je en un mieux ?? roll


HP Compaq nx6110 Notebook PC avec wifi Linksys 802.11b qui marche :)

Hors ligne

#22 Le 29/06/2006, à 03:04

raspouille

Re : [RESOLU... au calva!] pb cdrom, clé usb, carte son...

(moi j'ai bêtement utilisé un CD d'install... quand meme, merde !)
comment ça peux se faire un mauvais formatage ???
Le cd d'install ne formate pas ,il grave sur le hd.Non formaté, il ecrase (surcouche)  dans ce cas les partitions breezy ,avec toutes les consequences,defaut d'ecriture,fragmenttation  etc...:P ce n'est pas du windows.
hmm tous vos problemes viennent du disque dur,cdrom, clé usb, carte son...
Tester avec un live cd ubuntu dapper votre configuration,si les periphs sont reconnus.

@+ sad hmm wink yikes

Dernière modification par raspouille (Le 29/06/2006, à 03:37)


Linux Mint Mate 17.3 GNU/Linux.

Hors ligne

#23 Le 20/07/2006, à 01:51

spokieszut

Re : [RESOLU... au calva!] pb cdrom, clé usb, carte son...

scusez, jété parti en vacances... roll

Bon, ok Rapsouille, je comprend bien que tu veuille me faire formater tongue mais tout de même...
Le CD d'install ubuntu (ou du moins depuis la version Breezy), il demande si on veut formater avant d'installer... donc bon, ou bien il dis des conneries et il réécris sans formater, ou bien il formate mal si je suis ta logique...
Donc, question reste... comment est-ce que je peux formater de maniere propre et irrefutable ?? neutral

Duesio, je reste quand même un pti peu perplexe quant a mon disque; mis a part (quand mm belle part soit disant), ma usb, mon cdrom et mon son; j'ai aucun autre soucis, et ce depuis un moment du coup (voir début du poste).

Bon allé, j'va télécharger un live dapper ce soir, et on verra bien, mais je doute qu'il n'ai des probeme avec ma config, pasqu'elle n'a pas changé depuis ma Breezy, et qu'elle était reconnu au poil avec cette dernière... (ce serait vraiment c... de l'inverse sinon qd mme).

S.


HP Compaq nx6110 Notebook PC avec wifi Linksys 802.11b qui marche :)

Hors ligne

#24 Le 20/07/2006, à 07:53

raspouille

Re : [RESOLU... au calva!] pb cdrom, clé usb, carte son...

tongue    moi ,jai eu un changement de freebox,donc coupure et etc...
une install ubuntu crée des partitions,mais ne formate pas,elle ecrase les données du hd.
cool  pour le cd live dapper.

Dernière modification par raspouille (Le 20/07/2006, à 09:43)


Linux Mint Mate 17.3 GNU/Linux.

Hors ligne

#25 Le 21/07/2006, à 06:12

spokieszut

Re : [RESOLU... au calva!] pb cdrom, clé usb, carte son...

smile ok, bon alors, si je veux faire du propre; je formate le tout de la console ?
ou du Live Cd ?? roll


HP Compaq nx6110 Notebook PC avec wifi Linksys 802.11b qui marche :)

Hors ligne