#1 Le 21/07/2006, à 19:38
- Tchaka
Driver ATI ne marche plus apres mise a jour du système
Bonjour,
J'ai un probleme avec mon accéleration 3D de ATI (c'est une Radeon 9700 mobility). J'ai suivi le Wiki pour l'installation http://doc.ubuntu-fr.org/materiel/ati. Tout a bien marché, l'acceleration 3D etait bien effective.
Mais, depuis une mise a jour du noyau linux par le gestionnaire de mise a jour (pour la version linux-restricted-modules-2.6.15-26-686), l'accélération 3D ne fonctionne plus 
(je ne suis pas sur, mais je crois qu'il y a eu aussi une mise a jour aussi de xorg, je ne sais pu)
J'ai réitéré la procédure d'installation des drivers ATI en suivant le Wiki (en prenant en considération le nouveau noyau) mais ca ne marche toujours pas, je ne m'y connais pas beaucoup dans ce domaine, je ne sais pas donc pas quoi faire de plus.
Si ca peut aider :
[thibaut@yashin:~] $ uname -a
Linux yashin 2.6.15-26-686 #1 SMP PREEMPT Mon Jul 17 20:14:14 UTC 2006 i686 GNU/LinuxUn extrait de mon Xorg.conf
Section "Device"
Identifier "ATI Technologies, Inc. RV350 NP [Mobility Radeon 9600/9700 M10/M11]"
Driver "ati"
BusID "PCI:1:0:0"
EndSection
Section "Device"
Identifier "aticonfig-Device[0]"
Driver "fglrx"
EndSectionQuelqu'un pourrait-il m'aider?
Merci d'avance.
++
skaara@jabber.anywise.com
Hors ligne
#2 Le 21/07/2006, à 20:53
- mr_pouit
Re : Driver ATI ne marche plus apres mise a jour du système
Tu as bien installé linux-restricted-modules-2.6.15-26-686 (ça semble être le cas, mais mieux vaut confirmer) ?
Si oui, peux-tu donner le résultat de :
fglrxinfo
grep "(EE)" /var/log/Xorg.0.log # journal de l'interface graphique
dmesg | grep fglrx # pour vérifier que le module se charge bien?
Dernière modification par mr_pouit (Le 21/07/2006, à 21:11)
Hors ligne
#3 Le 21/07/2006, à 21:02
- Tchaka
Re : Driver ATI ne marche plus apres mise a jour du système
Slt,
Tout d'abord merci de bien vouloir m'aider 
Alors, en executant une par une les commandes ci dessus:
fglrxinfo display: :0.0 screen: 0
OpenGL vendor string: Mesa project: www.mesa3d.org
OpenGL renderer string: Mesa GLX Indirect
OpenGL version string: 1.2 (1.5 Mesa 6.4.1)grep "'(EE)" /var/log/Xorg.0.logne me renvoie rien
dmesg | grep fglrxne me renvoie rien (j'ai testé demsg | grep fglrx mais ka commande demsg n'est pas reconnue, donc je suppose que c'est dmesg 
)
A+
skaara@jabber.anywise.com
Hors ligne
#4 Le 21/07/2006, à 21:10
- mr_pouit
Re : Driver ATI ne marche plus apres mise a jour du système
Oui, désolé pour la faute (c'est corrigé 
).
argh, c'est pas vrai, j'ai encore fait une autre faute de frappe 
:
grep "(EE)" /var/log/Xorg.0.log(il y avait un apostrophe en trop, ce qui fait qu'on ne voyait pas s'il y avait des erreurs ou pas)
Peux-tu afficher la section "ServerLayout" (je crois que ça s'appelle comme ça) de ton xorg.conf ?
Dernière modification par mr_pouit (Le 21/07/2006, à 21:16)
Hors ligne
#5 Le 21/07/2006, à 21:34
- Tchaka
Re : Driver ATI ne marche plus apres mise a jour du système
Tu as bien installé linux-restricted-modules-2.6.15-26-686 (ça semble être le cas, mais mieux vaut confirmer) ?
J'ai oublié de répondre, oui c'est bien ceux la que j'ai d'installé, j'ai aussi viré tous les anciennes versions ainsi que tous les xxxx-386
grep "(EE)" /var/log/Xorg.0.log
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(EE) fglrx(0): Fail to initialize ASIC in kernel.
(EE) fglrx(0): DRIScreenInit failed!
(EE) xf86OpenSerial: Cannot open device /dev/wacom
(EE) xf86OpenSerial: Cannot open device /dev/wacom
(EE) xf86OpenSerial: Cannot open device /dev/wacom
(EE) xf86OpenSerial: Cannot open device /dev/wacom
(EE) xf86OpenSerial: Cannot open device /dev/wacom
(EE) xf86OpenSerial: Cannot open device /dev/wacomSinon, j'ai lu ce topic il ya qques jours, http://forum.ubuntu-fr.org/viewtopic.php?id=50420 (tu as d'ailleurs résolu le probleme de la personne), j'ai fait ce que tu avais marqué
l suffit d'ajouter DISABLED_MODULES="fglrx" dans /etc/default/linux-restricted-modules-common, et de faire un "sudo depmod -a"
mais ca n'a rien changé
A+
Dernière modification par Tchaka (Le 21/07/2006, à 21:38)
skaara@jabber.anywise.com
Hors ligne
#6 Le 21/07/2006, à 22:26
- mr_pouit
Re : Driver ATI ne marche plus apres mise a jour du système
Cette manipulation est à faire si tu installes les pilotes ATI à partir du fichier téléchargé sur le site d'ATI et non celui des dépôts.
(car là ça te désactive le module 
)
Donc il faut que tu enlèves fglrx de DISABLED_MODULES
(EE) fglrx(0): Fail to initialize ASIC in kernel.
En revanche, j'ai déjà eu cette erreur... elle est causée par un problème de dépendances inter-modules, qui normalement se résoud en recalculant les dépendances ("sudo depmod -a") et en redémarrant.
Hors ligne
#7 Le 22/07/2006, à 00:18
- Tchaka
Re : Driver ATI ne marche plus apres mise a jour du système
J'ai retiré fglrx de DISABLED_MODULES et fait sudo depmod -a suivis d'un reboot mais ca ne marche toujours pas
glxinfo|grep direct
direct rendering: No
OpenGL renderer string: Mesa GLX IndirectTu penses que je dois refaire une installation des drivers?
Dernière modification par Tchaka (Le 22/07/2006, à 00:19)
skaara@jabber.anywise.com
Hors ligne
#8 Le 22/07/2006, à 14:02
- kingue
Re : Driver ATI ne marche plus apres mise a jour du système
Salut à tous
J'ai le même problème avec mon portable HP. J'ai une carte vidéo ATI 9600 M10 et le direct rendering à toujours marché (j'ai jamais eu trop de problèmes avec les version précédentes d'Ubuntu ni avec Dapper) jusqu'à cette nouvelle mise à jour du noyau..
J'ai bien linux-restricted-modules-2.6.15-26-686 installé (il s'est installé tout seul par la mise à jour puisque le précédent était installé)
J'avais aussi le paquet xorg-driver-fglrx installé
Je continue à chercher
Hors ligne
#9 Le 22/07/2006, à 14:20
- kingue
Re : Driver ATI ne marche plus apres mise a jour du système
Alors
j'ai :
xorg-driver-fglrx et fglrx-kernel-2.6.15-26-686 installés
et j'ai modifié :
DISABLED_MODULES="fglrx" dans /etc/default/linux-restricted-modules-common
j'ai toujours pas d'acceleration graphique.....
Dernière modification par kingue (Le 22/07/2006, à 14:21)
Hors ligne
#10 Le 22/07/2006, à 14:30
- kingue
Re : Driver ATI ne marche plus apres mise a jour du système
Au fait si je vire xorg-driver-fglrx et donc que j'ai juste linux-restricted-modules-2.6.15-26-686 installé, X ne se lance même pas. Apparemment il ne veut pas du module fglrx des restricted modules (ou il ne le trouve pas ?)
Hors ligne
#11 Le 22/07/2006, à 18:43
- Tchaka
Re : Driver ATI ne marche plus apres mise a jour du système
j'ai jamais eu trop de problèmes avec les version précédentes d'Ubuntu ni avec Dapper) jusqu'à cette nouvelle mise à jour du noyau..
Moi avec toutes les versions d'Ubuntu j'ai eu des misères avec ATI, c'est une plait ces drivers, à chaque mise a jour du noyau, plus rien ne marche a chaque fois. Une chose est sur, ma prochaine cg, ce sera pas du ATI
J'espere qu'on arrivera a resoudre notre probleme...
skaara@jabber.anywise.com
Hors ligne
#12 Le 22/07/2006, à 19:08
- mr_pouit
Re : Driver ATI ne marche plus apres mise a jour du système
Tchaka : j'ai aussi une ati
C'est très bizarre, en plus on ne trouve pas grand chose sur cette erreur avec l'"ASIC" dans google. La seule fois que j'ai eu affaire à elle, elle s'est résolue par un "sudo depmod -a"...
Tu peux afficher quelques lignes de ton xorg.log avant et après cette erreur ?
Hors ligne
#13 Le 22/07/2006, à 21:20
- Tchaka
Re : Driver ATI ne marche plus apres mise a jour du système
(II) Loading sub module "fglrxdrm"
(II) LoadModule: "fglrxdrm"
(II) Loading /usr/lib/xorg/modules/linux/libfglrxdrm.so
(II) Module fglrxdrm: vendor="FireGL - ATI Technologies Inc."
compiled for 6.8.99.8, module version = 8.25.18
ABI class: X.Org Server Extension, version 0.2
(EE) fglrx(0): Fail to initialize ASIC in kernel.
(--) fglrx(0): VideoRAM: 65536 kByte, Type: DDR SGRAM / SDRAM
(II) fglrx(0): AGP card detected
(WW) fglrx(0): board is an unknown third party board, chipset is supported
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Reloading /usr/lib/xorg/modules/libddc.so[drm] failed to load kernel module "fglrx"
(II) fglrx(0): [drm] drmOpen failed
(EE) fglrx(0): DRIScreenInit failed!
(WW) fglrx(0): ***********************************************
(WW) fglrx(0): * DRI initialization failed! *
(WW) fglrx(0): * (maybe driver kernel module missing or bad) *
(WW) fglrx(0): * 2D acceleraton available (MMIO) *
(WW) fglrx(0): * no 3D acceleration available *
(WW) fglrx(0): ********************************************* *(**) Option "Device" "/dev/wacom"
(EE) xf86OpenSerial: Cannot open device /dev/wacom
No such file or directory.
Error opening /dev/wacom : Invalid argument
(EE) xf86OpenSerial: Cannot open device /dev/wacom
No such file or directory.
Error opening /dev/wacom : Invalid argument
(**) Option "Device" "/dev/wacom"
(EE) xf86OpenSerial: Cannot open device /dev/wacom
No such file or directory.
Error opening /dev/wacom : Invalid argument
(EE) xf86OpenSerial: Cannot open device /dev/wacom
No such file or directory.
Error opening /dev/wacom : Invalid argument
(**) Option "Device" "/dev/wacom"
(EE) xf86OpenSerial: Cannot open device /dev/wacom
No such file or directory.
Error opening /dev/wacom : Invalid argument
(EE) xf86OpenSerial: Cannot open device /dev/wacom
No such file or directory.
Error opening /dev/wacom : Invalid argument
Synaptics DeviceInit called
SynapticsCtrl called.Voila quelques morceaux du xorg.log. Un truc bizarre que j'ai constaté, dans le /etc/X11/, j'ai mon fichier xorg.conf, mais j'ai aussi ces fichiers :
- xorg.conf.fglrx-0
- xorg.conf.fglrx-1
- xorg.conf.fglrx-2
- xorg.conf.fglrx-3
- xorg.conf.original-0
- xorg.conf.original-1
en y jetant un oeil, ils sont identiques ou presque, seules quelques options diverses sur la section device change(Option "TVFormat" "PAL-N" ...)
j'ai aussi une ati
Tu as quel version du noyau? tu pourrais afficher ton xorg.conf pour comparer avec le mien?
skaara@jabber.anywise.com
Hors ligne
#14 Le 22/07/2006, à 21:30
- mr_pouit
Re : Driver ATI ne marche plus apres mise a jour du système
1/ C'est aticonfig qui crée tous ces fichiers à chaque utilisation
2/ radeon 9800 Pro, avec noyau 2.6.15-26-k7, pilotes fglrx 8.26.18
3/ voilà mon xorg.conf (pas mal bidouillé)
# /etc/X11/xorg.conf (xorg X Window System server configuration file)
Section "ServerLayout"
Identifier "Disposition par defaut"
Screen "Ecran" 0 0
InputDevice "Clavier"
InputDevice "Souris"
EndSectionSection "Files"
FontPath "/usr/share/X11/fonts/misc"
FontPath "/usr/share/X11/fonts/100dpi/:unscaled"
FontPath "/usr/share/X11/fonts/75dpi/:unscaled"
FontPath "/usr/share/X11/fonts/Type1"
FontPath "/usr/share/X11/fonts/100dpi"
FontPath "/usr/share/X11/fonts/75dpi"
FontPath "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
EndSectionSection "Module"
Load "bitmap"
Load "dbe"
Load "ddc"
Load "dri"
Load "extmod"
Load "freetype"
Load "glx"
Load "int10"
Load "type1"
Load "vbe"
EndSectionSection "InputDevice"
Identifier "Clavier"
Driver "kbd"
Option "CoreKeyboard"
Option "XkbRules" "xorg"
Option "XkbModel" "pc105"
Option "XkbLayout" "fr"
Option "XkbVariant" "latin9"
EndSectionSection "InputDevice"
Identifier "Souris"
Driver "mouse"
Option "CorePointer"
Option "Device" "/dev/input/mice"
Option "Protocol" "ExplorerPS/2"
Option "ZAxisMapping" "4 5"
Option "Emulate3Buttons" "true"
EndSectionSection "Monitor"
Identifier "VP171s-2"
HorizSync 30.0 - 82.0
VertRefresh 50.0 - 85.0
Option "DPMS"
EndSectionSection "Device"
Identifier "ATI Technologies, Inc. Radeon R350 NH [Radeon 9800 Pro]"
Driver "fglrx"
Option "UseFastTLS" "1"
Option "BlockSignalsOnLock" "on"
Option "ForceGenericCPU" "off"
Option "VideoOverlay" "on"
Option "OpenGLOverlay" "off"
BusID "PCI:3:0:0"
EndSectionSection "Screen"
Identifier "Ecran"
Device "ATI Technologies, Inc. Radeon R350 NH [Radeon 9800 Pro]"
Monitor "VP171s-2"
DefaultDepth 24
SubSection "Display"
Depth 24
Modes "1280x1024" "1024x768" "800x600" "640x480"
EndSubSection
EndSectionSection "DRI"
Mode 0666
EndSection
4/ Au pire, si tu as vraiment besoin de l'accélération graphique, désinstalle tous les paquets fglrx et reconfigure ton serveur graphique pour utiliser le pilote "ati". Il fonctionne vraiment bien pour les cartes <= 9250 Pro, et il fournit une accélération pas trop mauvaise (moins de fps que les pilotes fglrx, mais c'est correct) pour ma 9800 Pro, donc avec ta 9700Mobility ça devrait aller
Dernière modification par mr_pouit (Le 22/07/2006, à 21:31)
Hors ligne
#15 Le 22/07/2006, à 23:04
- Tchaka
Re : Driver ATI ne marche plus apres mise a jour du système
Et est ce que si j'installe directement les derniers drivers ATI telechargé sur leur site au lieu de passer par ceux de dapper j'ai une chance de faire marcher l'acceleration 3D?
Au pire, si tu as vraiment besoin de l'accélération graphique,
J'en ai tout simplement besoin pour pouvoir matter des divx, car dans l"etat actuel des choses, je suis obligé de rebooter sur Windows pour juste regarder un film, le comble!! Sinon les vidéos sont sacadées à mort, donc c'est impossible a regarder.
skaara@jabber.anywise.com
Hors ligne
#16 Le 23/07/2006, à 15:24
- Yann71
Re : Driver ATI ne marche plus apres mise a jour du système
Bonjour , j'ai exactement le meme probleme ! depuis la derniere mise a jour !
demon@fenixis:~$ dmesg | grep fglrx
[17179594.040000] fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel.
[17179594.040000] [fglrx] Maximum main memory to use for locked dma buffers: 430 MBytes.
[17179594.040000] [fglrx] module loaded - fglrx 8.25.18 [May 18 2006] on minor 0
[17179616.224000] [fglrx:firegl_unlock] *ERROR* Process 4863 using kernel context 0
demon@fenixis:~$ grep "(EE)" /var/log/Xorg.0.log
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(EE) fglrx(0): incompatible kernel module detected - HW accelerated OpenGL will not work
(EE) xf86OpenSerial: Cannot open device /dev/wacom
(EE) xf86OpenSerial: Cannot open device /dev/wacom
(EE) xf86OpenSerial: Cannot open device /dev/wacom
(EE) xf86OpenSerial: Cannot open device /dev/wacom
(EE) xf86OpenSerial: Cannot open device /dev/wacom
(EE) xf86OpenSerial: Cannot open device /dev/wacomdemon@fenixis:~$ fglrxinfo
display: :0.0 screen: 0
OpenGL vendor string: Mesa project: www.mesa3d.org
OpenGL renderer string: Mesa GLX Indirect
OpenGL version string: 1.2 (1.5 Mesa 6.4.1)Section "Files"
FontPath "/usr/share/X11/fonts/misc"
FontPath "/usr/share/X11/fonts/cyrillic"
FontPath "/usr/share/X11/fonts/100dpi/:unscaled"
FontPath "/usr/share/X11/fonts/75dpi/:unscaled"
FontPath "/usr/share/X11/fonts/Type1"
FontPath "/usr/share/X11/fonts/100dpi"
FontPath "/usr/share/X11/fonts/75dpi"
# path to defoma fonts
FontPath "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
EndSection
Section "Module"
Load "i2c"
Load "bitmap"
Load "ddc"
Load "dri"
# Load "extmod"
SubSection "extmod"
Option "omit xfree86-dga"
EndSubSection
Load "freetype"
Load "glx"
Load "int10"
Load "type1"
Load "vbe"
EndSection
Section "InputDevice"
Identifier "Generic Keyboard"
Driver "kbd"
Option "CoreKeyboard"
Option "XkbRules" "xorg"
Option "XkbModel" "pc105"
Option "XkbLayout" "fr"
Option "XkbVariant" "latin9"
EndSection
Section "InputDevice"
Identifier "Configured Mouse"
Driver "mouse"
Option "CorePointer"
Option "Device" "/dev/input/mice"
Option "Protocol" "ExplorerPS/2"
Option "ZAxisMapping" "4 5"
Option "Emulate3Buttons" "true"
EndSection
Section "InputDevice"
Driver "wacom"
Identifier "stylus"
Option "Device" "/dev/wacom" # Change to
# /dev/input/event
# for USB
Option "Type" "stylus"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection
Section "InputDevice"
Driver "wacom"
Identifier "eraser"
Option "Device" "/dev/wacom" # Change to
# /dev/input/event
# for USB
Option "Type" "eraser"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection
Section "InputDevice"
Driver "wacom"
Identifier "cursor"
Option "Device" "/dev/wacom" # Change to
# /dev/input/event
# for USB
Option "Type" "cursor"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection
Section "Device"
Identifier "ATI Technologies, Inc. RV370 5B60 [Radeon X300 (PCIE)]"
Driver "fglrx"
BusID "PCI:1:0:0"
EndSection
Section "Monitor"
Identifier "782"
Option "DPMS"
EndSection
Section "Screen"
Identifier "Default Screen"
Device "ATI Technologies, Inc. RV370 5B60 [Radeon X300 (PCIE)]"
Monitor "782"
DefaultDepth 24
SubSection "Display"
Depth 1
Modes "1280x1024" "1024x768" "832x624" "800x600" "720x400" "640x480"
EndSubSection
SubSection "Display"
Depth 4
Modes "1280x1024" "1024x768" "832x624" "800x600" "720x400" "640x480"
EndSubSection
SubSection "Display"
Depth 8
Modes "1280x1024" "1024x768" "832x624" "800x600" "720x400" "640x480"
EndSubSection
SubSection "Display"
Depth 15
Modes "1280x1024" "1024x768" "832x624" "800x600" "720x400" "640x480"
EndSubSection
SubSection "Display"
Depth 16
Modes "1280x1024" "1024x768" "832x624" "800x600" "720x400" "640x480"
EndSubSection
SubSection "Display"
Depth 24
Modes "1280x1024" "1024x768" "832x624" "800x600" "720x400" "640x480"
EndSubSection
EndSection
Section "ServerLayout"
Identifier "Default Layout"
Screen "Default Screen"
InputDevice "Generic Keyboard"
InputDevice "Configured Mouse"
InputDevice "stylus" "SendCoreEvents"
InputDevice "cursor" "SendCoreEvents"
InputDevice "eraser" "SendCoreEvents"
EndSection
Section "DRI"
Mode 0666
EndSectionVoila, je continu a chercher de mon coté moi aussi !
Hors ligne
#17 Le 23/07/2006, à 18:28
- Tchaka
Re : Driver ATI ne marche plus apres mise a jour du système
Bienvenue au club!
Une ptite question, peut on empecher la mise a jour du kernel, comme ca dans le cas d'une nouvelle mise a jour, ca evitera de casser de nouveau mon systeme.
skaara@jabber.anywise.com
Hors ligne
#18 Le 23/07/2006, à 18:31
- mr_pouit
Re : Driver ATI ne marche plus apres mise a jour du système
Supprimer les méta-paquets linux-{386,686,k7}, linux-image-{386,686,k7} et linux-restricted-modules-{386,686,k7} devrait faire l'affaire.
Hors ligne
#19 Le 23/07/2006, à 19:22
- Tchaka
Re : Driver ATI ne marche plus apres mise a jour du système
Supprimer les méta-paquets linux-{386,686,k7}, linux-image-{386,686,k7} et linux-restricted-modules-{386,686,k7} devrait faire l'affaire.
Oui, mais dans ce cas là, je peux pas installer les drivers ATI alors, nan? En fait j'ai dans l'idée d'employer les grands moyens, faire une reinstallation de Ubuntu, installer les drivers ATI avec le noyau de base et ne plus faire de mise a jour du noyau par la suite, car je tiens pas à me refaire avoir une fois.
A+
skaara@jabber.anywise.com
Hors ligne
#20 Le 23/07/2006, à 22:04
- Atika
Re : Driver ATI ne marche plus apres mise a jour du système
Salut à tous,
J'ai eu le même problème que vous avant hier.
Pour le résoudre j'ai suivi les instructions de la méthode 2 de cette page http://wiki.cchtml.com/index.php/Ubuntu … tion_Guide
N'oubliez de télécharger la dernière version du driver et aussi d'effectuer les instructions suivantes:
sudo dpkg -r fglrx-control
sudo dpkg -r fglrx-kernel-source
sudo dpkg -r xorg-driver-fglrxOu
sudo dpkg -r fglrx-kernel
sudo dpkg -r fglrx-kernel-2.6.12-10-686-smp
sudo dpkg -r xorg-driver-fglrxUne copie d'une version antérieure de libGL.so.1.2 est peut être necessaire (la version 8.24.8).
Une fois ceci fait, n'oubliez pas de remplacer, dans le fichier /etc/X11/xorg.conf, "ati" par "fglrx" dans la section "DEVICE"
Dernière modification par Atika (Le 23/07/2006, à 22:05)
Hors ligne
#21 Le 12/08/2006, à 19:08
- kingue
Re : Driver ATI ne marche plus apres mise a jour du système
Re
Moi j'ai résolu le problème en reinstallant tout le système (merci la partition /home séparée) et en utilisant le dépot de Mrpouit sans la mise à jour des drivers vidéo (merci Mrpouit ) :
deb http://mrpouit.tuxfamily.org dapper-pouit backports contrib openalchemist
En fait je crois que c'est les anciens dépots de Mrpouit qui m'ont mis le bintze (ceux avec les drivers ati)..
Ca remarche nickel pour moi
Hors ligne
#22 Le 01/11/2006, à 23:54
- Djrem
Re : Driver ATI ne marche plus apres mise a jour du système
Même problème que vous les gars. J'ai exacetment les mêmes erreurs dans le log de Xorg.
X Window System Version 7.1.1
Release Date: 12 May 2006
X Protocol Version 11, Revision 0, Release 7.1.1
Build Operating System: Linux 2.6.15.7 i686
Current Operating System: Linux djrem 2.6.17-10-386 #2 Fri Oct 13 18:41:40 UTC 2006 i686
Build Date: 07 July 2006
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Module Loader present
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Wed Nov 1 19:40:42 2006
(==) Using config file: "/etc/X11/xorg.conf"
(==) ServerLayout "Default Layout"
(**) |-->Screen "Default Screen" (0)
(**) | |-->Monitor "Philips 170C"
(**) | |-->Device "ATI Technologies, Inc. RV350 AP [Radeon 9600]"
(**) |-->Input Device "Generic Keyboard"
(**) |-->Input Device "Configured Mouse"
(**) |-->Input Device "stylus"
(**) |-->Input Device "cursor"
(**) |-->Input Device "eraser"
(WW) The directory "/usr/share/X11/fonts/cyrillic" does not exist.
Entry deleted from font path.
(**) FontPath set to:
/usr/share/X11/fonts/misc,
/usr/share/X11/fonts/100dpi/:unscaled,
/usr/share/X11/fonts/75dpi/:unscaled,
/usr/share/X11/fonts/Type1,
/usr/share/X11/fonts/100dpi,
/usr/share/X11/fonts/75dpi,
/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType,
/usr/share/fonts/X11/misc/,
/usr/share/fonts/X11/TTF/,
/usr/share/fonts/X11/OTF,
/usr/share/fonts/X11/Type1/,
/usr/share/fonts/X11/CID/,
/usr/share/fonts/X11/100dpi/,
/usr/share/fonts/X11/75dpi/
(==) RgbPath set to "/usr/share/X11/rgb"
(==) ModulePath set to "/usr/lib/xorg/modules"
(**) Extension "Composite" is disabled
(II) Open ACPI successful (/var/run/acpid.socket)
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.3
X.Org Video Driver: 1.0
X.Org XInput driver : 0.6
X.Org Server Extension : 0.3
X.Org Font Renderer : 0.5
(II) Loader running on linux
(II) LoadModule: "bitmap"
(II) Loading /usr/lib/xorg/modules/fonts/libbitmap.so
(II) Module bitmap: vendor="X.Org Foundation"
compiled for 7.1.1, module version = 1.0.0
Module class: X.Org Font Renderer
ABI class: X.Org Font Renderer, version 0.5
(II) Loading font Bitmap
(II) LoadModule: "pcidata"
(II) Loading /usr/lib/xorg/modules/libpcidata.so
(II) Module pcidata: vendor="X.Org Foundation"
compiled for 7.1.1, module version = 1.0.0
ABI class: X.Org Video Driver, version 1.0
(++) using VT number 7
(II) PCI: PCI scan (all values are in hex)
(II) PCI: 00:00:0: chip 1106,3189 card 1106,3189 rev 00 class 06,00,00 hdr 00
(II) PCI: 00:01:0: chip 1106,b168 card 0000,0000 rev 00 class 06,04,00 hdr 01
(II) PCI: 00:10:0: chip 1106,3038 card 1106,3038 rev 80 class 0c,03,00 hdr 80
(II) PCI: 00:10:1: chip 1106,3038 card 1106,3038 rev 80 class 0c,03,00 hdr 80
(II) PCI: 00:10:2: chip 1106,3038 card 1106,3038 rev 80 class 0c,03,00 hdr 80
(II) PCI: 00:10:3: chip 1106,3104 card 1106,3104 rev 82 class 0c,03,20 hdr 00
(II) PCI: 00:11:0: chip 1106,3177 card 1106,3177 rev 00 class 06,01,00 hdr 80
(II) PCI: 00:11:1: chip 1106,0571 card 1106,0571 rev 06 class 01,01,8a hdr 00
(II) PCI: 00:11:5: chip 1106,3059 card 15bd,1001 rev 50 class 04,01,00 hdr 00
(II) PCI: 00:14:0: chip 1516,0803 card 1516,0803 rev 00 class 02,00,00 hdr 00
(II) PCI: 01:00:0: chip 1002,4150 card 174b,7c19 rev 00 class 03,00,00 hdr 80
(II) PCI: 01:00:1: chip 1002,4170 card 174b,7c18 rev 00 class 03,80,00 hdr 00
(II) PCI: End of PCI scan
(II) Host-to-PCI bridge:
(II) Bus 0: bridge is at (0:0:0), (0,0,1), BCTRL: 0x0008 (VGA_EN is set)
(II) Bus 0 I/O range:
[0] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[b]
(II) Bus 0 non-prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[b]
(II) Bus 0 prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[b]
(II) PCI-to-PCI bridge:
(II) Bus 1: bridge is at (0:1:0), (0,1,1), BCTRL: 0x000c (VGA_EN is set)
(II) Bus 1 I/O range:
[0] -1 0 0x0000c000 - 0x0000c0ff (0x100) IX[b]
[1] -1 0 0x0000c400 - 0x0000c4ff (0x100) IX[b]
[2] -1 0 0x0000c800 - 0x0000c8ff (0x100) IX[b]
[3] -1 0 0x0000cc00 - 0x0000ccff (0x100) IX[b]
(II) Bus 1 non-prefetchable memory range:
[0] -1 0 0xe8000000 - 0xe9ffffff (0x2000000) MX[b]
(II) Bus 1 prefetchable memory range:
[0] -1 0 0xc0000000 - 0xdfffffff (0x20000000) MX[b]
(II) PCI-to-ISA bridge:
(II) Bus -1: bridge is at (0:17:0), (0,-1,-1), BCTRL: 0x0008 (VGA_EN is set)
(--) PCI:*(1:0:0) ATI Technologies Inc RV350 AP [Radeon 9600] rev 0, Mem @ 0xc0000000/28, 0xe9000000/16, I/O @ 0xc000/8
(--) PCI: (1:0:1) ATI Technologies Inc RV350 AP [Radeon 9600] (Secondary) rev 0, Mem @ 0xd0000000/28, 0xe9010000/16
(II) Addressable bus resource ranges are
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[b]
[1] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[b]
(II) OS-reported resource ranges:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[5] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
(II) PCI Memory resource overlap reduced 0xe0000000 from 0xe7ffffff to 0xdfffffff
(II) Active PCI resource ranges:
[0] -1 0 0xeb000000 - 0xeb0003ff (0x400) MX[b]
[1] -1 0 0xeb001000 - 0xeb0010ff (0x100) MX[b]
[2] -1 0 0xe0000000 - 0xdfffffff (0x0) MX[b]O
[3] -1 0 0xe9000000 - 0xe900ffff (0x10000) MX[b](B)
[4] -1 0 0xc0000000 - 0xcfffffff (0x10000000) MX[b](B)
[5] -1 0 0x0000e400 - 0x0000e4ff (0x100) IX[b]
[6] -1 0 0x0000e000 - 0x0000e0ff (0x100) IX[b]
[7] -1 0 0x0000dc00 - 0x0000dc0f (0x10) IX[b]
[8] -1 0 0x0000d800 - 0x0000d81f (0x20) IX[b]
[9] -1 0 0x0000d400 - 0x0000d41f (0x20) IX[b]
[10] -1 0 0x0000d000 - 0x0000d01f (0x20) IX[b]
[11] -1 0 0x0000c000 - 0x0000c0ff (0x100) IX[b](B)
(II) Inactive PCI resource ranges:
[0] -1 0 0xe9010000 - 0xe901ffff (0x10000) MX[b](B)
[1] -1 0 0xd0000000 - 0xdfffffff (0x10000000) MX[b](B)
(II) Active PCI resource ranges after removing overlaps:
[0] -1 0 0xeb000000 - 0xeb0003ff (0x400) MX[b]
[1] -1 0 0xeb001000 - 0xeb0010ff (0x100) MX[b]
[2] -1 0 0xe0000000 - 0xdfffffff (0x0) MX[b]O
[3] -1 0 0xe9000000 - 0xe900ffff (0x10000) MX[b](B)
[4] -1 0 0xc0000000 - 0xcfffffff (0x10000000) MX[b](B)
[5] -1 0 0x0000e400 - 0x0000e4ff (0x100) IX[b]
[6] -1 0 0x0000e000 - 0x0000e0ff (0x100) IX[b]
[7] -1 0 0x0000dc00 - 0x0000dc0f (0x10) IX[b]
[8] -1 0 0x0000d800 - 0x0000d81f (0x20) IX[b]
[9] -1 0 0x0000d400 - 0x0000d41f (0x20) IX[b]
[10] -1 0 0x0000d000 - 0x0000d01f (0x20) IX[b]
[11] -1 0 0x0000c000 - 0x0000c0ff (0x100) IX[b](B)
(II) Inactive PCI resource ranges after removing overlaps:
[0] -1 0 0xe9010000 - 0xe901ffff (0x10000) MX[b](B)
[1] -1 0 0xd0000000 - 0xdfffffff (0x10000000) MX[b](B)
(II) OS-reported resource ranges after removing overlaps with PCI:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[5] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
(II) All system resource ranges:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0xeb000000 - 0xeb0003ff (0x400) MX[b]
[5] -1 0 0xeb001000 - 0xeb0010ff (0x100) MX[b]
[6] -1 0 0xe0000000 - 0xdfffffff (0x0) MX[b]O
[7] -1 0 0xe9000000 - 0xe900ffff (0x10000) MX[b](B)
[8] -1 0 0xc0000000 - 0xcfffffff (0x10000000) MX[b](B)
[9] -1 0 0xe9010000 - 0xe901ffff (0x10000) MX[b](B)
[10] -1 0 0xd0000000 - 0xdfffffff (0x10000000) MX[b](B)
[11] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[12] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
[13] -1 0 0x0000e400 - 0x0000e4ff (0x100) IX[b]
[14] -1 0 0x0000e000 - 0x0000e0ff (0x100) IX[b]
[15] -1 0 0x0000dc00 - 0x0000dc0f (0x10) IX[b]
[16] -1 0 0x0000d800 - 0x0000d81f (0x20) IX[b]
[17] -1 0 0x0000d400 - 0x0000d41f (0x20) IX[b]
[18] -1 0 0x0000d000 - 0x0000d01f (0x20) IX[b]
[19] -1 0 0x0000c000 - 0x0000c0ff (0x100) IX[b](B)
(II) LoadModule: "i2c"
(II) Loading /usr/lib/xorg/modules/libi2c.so
(II) Module i2c: vendor="X.Org Foundation"
compiled for 7.1.1, module version = 1.2.0
ABI class: X.Org Video Driver, version 1.0
(II) LoadModule: "bitmap"
(II) Reloading /usr/lib/xorg/modules/fonts/libbitmap.so
(II) Loading font Bitmap
(II) LoadModule: "ddc"
(II) Loading /usr/lib/xorg/modules/libddc.so
(II) Module ddc: vendor="X.Org Foundation"
compiled for 7.1.1, module version = 1.0.0
ABI class: X.Org Video Driver, version 1.0
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions/libdri.so
(II) Module dri: vendor="X.Org Foundation"
compiled for 7.1.1, module version = 1.0.0
ABI class: X.Org Server Extension, version 0.3
(II) Loading sub module "drm"
(II) LoadModule: "drm"
(II) Loading /usr/lib/xorg/modules/linux/libdrm.so
(II) Module drm: vendor="X.Org Foundation"
compiled for 7.1.1, module version = 1.0.0
ABI class: X.Org Server Extension, version 0.3
(II) Loading extension XFree86-DRI
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
compiled for 7.1.1, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 0.3
(II) Loading extension SHAPE
(II) Loading extension MIT-SUNDRY-NONSTANDARD
(II) Loading extension BIG-REQUESTS
(II) Loading extension SYNC
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XC-MISC
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-Misc
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension TOG-CUP
(II) Loading extension Extended-Visual-Information
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "freetype"
(II) Loading /usr/lib/xorg/modules/fonts/libfreetype.so
(II) Module freetype: vendor="X.Org Foundation & the After X-TT Project"
compiled for 7.1.1, module version = 2.1.0
Module class: X.Org Font Renderer
ABI class: X.Org Font Renderer, version 0.5
(II) Loading font FreeType
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions/libglx.so
(II) Module glx: vendor="X.Org Foundation"
compiled for 7.1.1, module version = 1.0.0
ABI class: X.Org Server Extension, version 0.3
(==) AIGLX enabled
(II) Loading extension GLX
(II) LoadModule: "int10"
(II) Loading /usr/lib/xorg/modules/libint10.so
(II) Module int10: vendor="X.Org Foundation"
compiled for 7.1.1, module version = 1.0.0
ABI class: X.Org Video Driver, version 1.0
(II) LoadModule: "type1"
(II) Loading /usr/lib/xorg/modules/fonts/libtype1.so
(II) Module type1: vendor="X.Org Foundation"
compiled for 7.1.1, module version = 1.0.2
Module class: X.Org Font Renderer
ABI class: X.Org Font Renderer, version 0.5
(II) Loading font Type1
(II) LoadModule: "vbe"
(II) Loading /usr/lib/xorg/modules/libvbe.so
(II) Module vbe: vendor="X.Org Foundation"
compiled for 7.1.1, module version = 1.1.0
ABI class: X.Org Video Driver, version 1.0
(II) LoadModule: "fglrx"
(II) Loading /usr/lib/xorg/modules/drivers/fglrx_drv.so
(II) Module fglrx: vendor="FireGL - ATI Technologies Inc."
compiled for 7.1.0, module version = 8.28.8
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 1.0
(II) LoadModule: "kbd"
(II) Loading /usr/lib/xorg/modules/input/kbd_drv.so
(II) Module kbd: vendor="X.Org Foundation"
compiled for 7.1.1, module version = 1.1.0
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 0.6
(II) LoadModule: "mouse"
(II) Loading /usr/lib/xorg/modules/input/mouse_drv.so
(II) Module mouse: vendor="X.Org Foundation"
compiled for 7.1.1, module version = 1.1.1
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 0.6
(II) LoadModule: "wacom"
(II) Loading /usr/lib/xorg/modules/input/wacom_drv.so
(II) Module wacom: vendor="X.Org Foundation"
compiled for 4.3.99.902, module version = 1.0.0
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 0.6
(II) Wacom driver level: 47-0.7.2 $
(II) ATI Radeon/FireGL: The following chipsets are supported:
RADEON 9000/9000 PRO (RV250 4966), RADEON 9000 LE (RV250 4967),
MOBILITY FireGL 9000 (M9 4C64), MOBILITY RADEON 9000 (M9 4C66),
RADEON 9000 PRO (D9 4C67), RADEON 9250 (RV280 5960),
RADEON 9250/9200 Series (RV280 5961),
RADEON 9250/9200 Series (RV280 5962),
RADEON 9250/9200 Series (RV280 5964), FireMV 2200 PCI (RV280 5965),
MOBILITY RADEON 9200 (M9+ 5C61), MOBILITY RADEON 9200 (M9+ 5C63),
FireGL 8800 (R200 5148), RADEON 8500 (R200 514C),
RADEON 9100 (R200 514D), RADEON 8500 AIW (R200 4242),
RADEON 9600 (RV350 4150), RADEON 9600 SE (RV350 4151),
RADEON 9600 PRO (RV360 4152), RADEON 9600 (RV350 4E51),
MOBILITY RADEON 9600/9700 (M10/M11 4E50),
MOBILITY RADEON 9500 (M11 4E52), MOBILITY RADEON 9550 (M12 4E56),
RADEON 9500 (R300 4144), RADEON 9600 TX (R300 4146),
FireGL Z1 (R300 4147), RADEON 9700 PRO (R300 4E44),
RADEON 9500 PRO/9700 (R300 4E45), RADEON 9600 TX (R300 4E46),
FireGL X1 (R300 4E47), RADEON 9800 SE (R350 4148),
RADEON 9500 (R350 4149), RADEON 9550 (RV350 4153),
FireGL T2 (RV350 4154), RADEON 9600 (RV351 4155),
RADEON 9800 PRO (R350 4E48), RADEON 9800 (R350 4E49),
RADEON 9800 XT (R360 4E4A), FireGL X2-256/X2-256t (R350 4E4B),
MOBILITY FireGL T2/T2e (M10/M11 4E54), RADEON X300/X550 (RV370 5B60),
RADEON X600 (RV380 5B62), RADEON X550 (RV370 5B63),
FireGL V3100 (RV370 5B64), FireMV 2200 (RV370 5B65),
MOBILITY RADEON X300 (M22 5460), MOBILITY RADEON X300 (M22 5461),
MOBILITY RADEON X600 SE (M24 5462), MOBILITY FireGL V3100 (M22 5464),
RADEON X600/X550 Series (RV380 3E50), FireGL V3200 (RV380 3E54),
MOBILITY RADEON X600 (M24 3150), MOBILITY RADEON X300 (M22 3152),
MOBILITY FireGL V3200 (M24 3154), RADEON X800 (R420 4A48),
RADEON X800 PRO (R420 4A49), RADEON X800 SE (R420 4A4A),
RADEON X800 XT (R420 4A4B), RADEON X800 (R420 4A4C),
FireGL X3-256 (R420 4A4D), MOBILITY RADEON 9800 (M18 4A4E),
RADEON X800 SE (R420 4A4F),
RADEON X800 XT Platinum Edition (R420 4A50),
RADEON X800 VE (R420 4A54), RADEON X800 (R423 5548),
RADEON X800 GTO (R423 5549),
RADEON X800 XT Platinum Edition (R423 554A),
RADEON X800 GT (R423 554B), RADEON X800 XT (R423 5D57),
FireGL V7100 (R423 5550), FireGL V5100 (R423 5551),
MOBILITY RADEON X800 XT (M28 5D48), MOBILITY FireGL V5100 (M28 5D49),
MOBILITY RADEON X800 (M28 5D4A), RADEON X800 XL (R430 554D),
RADEON X800 GT (R430 554E), RADEON X800 GTO (R430 554F),
RADEON X850 XT Platinum Edition (R480 5D4D),
RADEON X800 GTO (R480 5D4F), FireGL V7200 (R480 5D50),
RADEON X850 XT (R480 5D52), RADEON X850 (R481 4B48),
RADEON X850 XT (R481 4B49), RADEON X850 SE (R481 4B4A),
RADEON X850 PRO (R481 4B4B),
RADEON X850 XT Platinum Edition (R481 4B4C),
MOBILITY FireGL V5000 (M26 564A), MOBILITY FireGL V5000 (M26 564B),
FireGL V5000 (RV410 5E48), RADEON X700 XT (RV410 5E4A),
RADEON X700 PRO (RV410 5E4B), RADEON X700 SE (RV410 5E4C),
RADEON X700 (RV410 5E4D), RADEON X700/X550 Series (RV410 5E4F),
MOBILITY RADEON X700 (M26 5652), MOBILITY RADEON X700 (M26 5653),
MOBILITY RADEON X700 XL (M26-XC 564F),
RADEON 9000/9100 IGP Series (RS300 5834),
RADEON 9000 PRO/9100 PRO IGP (RS350 7834),
MOBILITY RADEON 9000 IGP (RL300MB 7835),
MOBILITY RADEON 9000/9100 IGP (RS300M 5835),
RADEON XPRESS 200 (RS400 5A41), RADEON XPRESS 200M (RS400 5A42),
RADEON XPRESS 200 (RS480 5954), RADEON XPRESS 200M (RS480 5955),
RADEON XPRESS 200 (RS482 5974), RADEON XPRESS 200M (RS482 5975),
RADEON XPRESS 200 (RC410 5A61), RADEON XPRESS 200M (RC410 5A62),
RADEON X1800 (R520 7100), MOBILITY RADEON X1800 XT (M58 7101),
MOBILITY RADEON X1800 (M58 7102), MOBILITY FireGL V7200 (M58 7103),
FireGL V7200 (R520 7104), FireGL V5300 (R520 7105),
MOBILITY FireGL V7100 (M58 7106), RADEON X1800 Series (R520 7108),
RADEON X1800 Series (R520 7109), RADEON X1800 Series (R520 710A),
RADEON X1800 Series (R520 710B), RADEON X1800 Series (R520 710C),
FireGL V7300 (R520 710E), FireGL V7350 (R520 710F),
MOBILITY RADEON X1300 (M52 714B), MOBILITY RADEON X1300 (M52 714C),
RADEON X1600 Series (RV515 7140), RADEON X1300 Series (RV515 7142),
MOBILITY FireGL (M54 GL 7144), MOBILITY RADEON X1400 (M54 7145),
RADEON X1300 Series (RV515 7146), MOBILITY RADEON X1300 (M52 7149),
MOBILITY RADEON X1300 (M52 714A), RADEON X1300 Series (RV515 714D),
RADEON X1300 Series (RV515 714E), FireGL V3300 (RV515 7152),
RADEON X1300 Series (RV515 715E), RADEON X1300 (RV516 7180),
RADEON X1600 Series (RV516 7181), RADEON X1300 (RV516 7183),
MOBILITY RADEON X1450 (M64P 7186), RADEON X1300 (RV516 7187),
MOBILITY RADEON X1350 (M62P 718B),
MOBILITY RADEON X1350 (M62CSP 718C),
MOBILITY RADEON X1450 (M64CSP 718D),
MOBILITY RADEON X1350 (M62S 7196), RADEON X1900 (R580 7240),
RADEON X1900 (R580 7243), RADEON X1900 (R580 7244),
RADEON X1900 (R580 7245), RADEON X1900 (R580 7246),
RADEON X1900 (R580 7247), RADEON X1900 (R580 7248),
RADEON X1900 (R580 7249), RADEON X1900 (R580 724A),
RADEON X1900 (R580 724B), RADEON X1900 (R580 724C),
RADEON X1900 (R580 724D), FireStream 2U (R580 724E),
FireStream 2U (R580 724F), RADEON X1600 Series (RV530 71C0),
RADEON X1600 Series (RV530 71C2), MOBILITY FireGL V5200 (M56 71C4),
MOBILITY RADEON X1600 (M56 71C5),
RADEON X1600 Series (RV530 LE 71C6),
RADEON X1600 Series (RV530 VE 71CE), FireGL V3400 (RV530 71D2),
MOBILITY RADEON X1700 (M66-XT 71D6), FireGL V5200 (RV530 71DA),
RADEON X1600 Series (RV530 SE 71DE), RADEON X1600 XT (RV535 XT 71C1),
MOBILITY FireGL V5250 (M66GL 71D4),
MOBILITY RADEON X1700 (M66-P 71D5), RADEON Xpress 1200 (RS600 7941),
RADEON Xpress 1200 (RS600 7942)
(II) Primary Device is: PCI 01:00:0
(II) ATI Proprietary Linux Driver Version Identifier:8.28.8
(II) ATI Proprietary Linux Driver Release Identifier: LGDr8.28g1
(II) ATI Proprietary Linux Driver Build Date: Aug 17 2006 09:28:12
(II) ATI Proprietary Linux Driver Build Information: autobuild-rel-r6-8.28.1.1.2.3-driver-lnx-x86-x86_64-287161
(WW) fglrx: No matching Device section for instance (BusID PCI:1:0:1) found
(--) Chipset RADEON 9600 (RV350 4150) found
(II) resource ranges after xf86ClaimFixedResources() call:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0xeb000000 - 0xeb0003ff (0x400) MX[b]
[5] -1 0 0xeb001000 - 0xeb0010ff (0x100) MX[b]
[6] -1 0 0xe0000000 - 0xdfffffff (0x0) MX[b]O
[7] -1 0 0xe9000000 - 0xe900ffff (0x10000) MX[b](B)
[8] -1 0 0xc0000000 - 0xcfffffff (0x10000000) MX[b](B)
[9] -1 0 0xe9010000 - 0xe901ffff (0x10000) MX[b](B)
[10] -1 0 0xd0000000 - 0xdfffffff (0x10000000) MX[b](B)
[11] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[12] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
[13] -1 0 0x0000e400 - 0x0000e4ff (0x100) IX[b]
[14] -1 0 0x0000e000 - 0x0000e0ff (0x100) IX[b]
[15] -1 0 0x0000dc00 - 0x0000dc0f (0x10) IX[b]
[16] -1 0 0x0000d800 - 0x0000d81f (0x20) IX[b]
[17] -1 0 0x0000d400 - 0x0000d41f (0x20) IX[b]
[18] -1 0 0x0000d000 - 0x0000d01f (0x20) IX[b]
[19] -1 0 0x0000c000 - 0x0000c0ff (0x100) IX[b](B)
(II) fglrx(0): pEnt->device->identifier=0x81e1ad8
(II) resource ranges after probing:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0xeb000000 - 0xeb0003ff (0x400) MX[b]
[5] -1 0 0xeb001000 - 0xeb0010ff (0x100) MX[b]
[6] -1 0 0xe0000000 - 0xdfffffff (0x0) MX[b]O
[7] -1 0 0xe9000000 - 0xe900ffff (0x10000) MX[b](B)
[8] -1 0 0xc0000000 - 0xcfffffff (0x10000000) MX[b](B)
[9] -1 0 0xe9010000 - 0xe901ffff (0x10000) MX[b](B)
[10] -1 0 0xd0000000 - 0xdfffffff (0x10000000) MX[b](B)
[11] 0 0 0x000a0000 - 0x000affff (0x10000) MS[b]
[12] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[b]
[13] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[b]
[14] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[15] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
[16] -1 0 0x0000e400 - 0x0000e4ff (0x100) IX[b]
[17] -1 0 0x0000e000 - 0x0000e0ff (0x100) IX[b]
[18] -1 0 0x0000dc00 - 0x0000dc0f (0x10) IX[b]
[19] -1 0 0x0000d800 - 0x0000d81f (0x20) IX[b]
[20] -1 0 0x0000d400 - 0x0000d41f (0x20) IX[b]
[21] -1 0 0x0000d000 - 0x0000d01f (0x20) IX[b]
[22] -1 0 0x0000c000 - 0x0000c0ff (0x100) IX[b](B)
[23] 0 0 0x000003b0 - 0x000003bb (0xc) IS[b]
[24] 0 0 0x000003c0 - 0x000003df (0x20) IS[b]
(II) Setting vga for screen 0.
(II) fglrx(0): === [R200PreInit] === begin, [s]
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/lib/xorg/modules/libvgahw.so
(II) Module vgahw: vendor="X.Org Foundation"
compiled for 7.1.1, module version = 0.1.0
ABI class: X.Org Video Driver, version 1.0
(II) fglrx(0): PCI bus 1 card 0 func 0
(**) fglrx(0): Depth 24, (--) framebuffer bpp 32
(II) fglrx(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
(==) fglrx(0): Default visual is TrueColor
(**) fglrx(0): Option "OpenGLOverlay" "off"
(**) fglrx(0): Option "VideoOverlay" "on"
(**) fglrx(0): Option "DPMS"
(==) fglrx(0): RGB weight 888
(II) fglrx(0): Using 8 bits per RGB (8 bit DAC)
(==) fglrx(0): Gamma Correction for I is 0x06419064
(==) fglrx(0): Gamma Correction for II is 0x06419064
(==) fglrx(0): Buffer Tiling is ON
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Reloading /usr/lib/xorg/modules/libint10.so
(II) fglrx(0): Primary V_BIOS segment is: 0xc000
(--) fglrx(0): Chipset: "RADEON 9600 (RV350 4150)" (Chipset = 0x4150)
(--) fglrx(0): (PciSubVendor = 0x174b, PciSubDevice = 0x7c19)
(--) fglrx(0): board vendor info: third party graphics adapter - NOT original ATI
(--) fglrx(0): Linear framebuffer (phys) at 0xc0000000
(--) fglrx(0): MMIO registers at 0xe9000000
(==) fglrx(0): ROM-BIOS at 0x000c0000
(II) Loading sub module "vbe"
(II) LoadModule: "vbe"
(II) Reloading /usr/lib/xorg/modules/libvbe.so
(II) fglrx(0): VESA BIOS detected
(II) fglrx(0): VESA VBE Version 2.0
(II) fglrx(0): VESA VBE Total Mem: 131072 kB
(II) fglrx(0): VESA VBE OEM: ATI RADEON 9600 PRO
(II) fglrx(0): VESA VBE OEM Software Rev: 1.0
(II) fglrx(0): VESA VBE OEM Vendor: ATI Technologies Inc.
(II) fglrx(0): VESA VBE OEM Product: V350
(II) fglrx(0): VESA VBE OEM Product Rev: 01.00
(II) Loading sub module "drm"
(II) LoadModule: "drm"
(II) Reloading /usr/lib/xorg/modules/linux/libdrm.so
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is -1, (No such device or address)
drmOpenDevice: open result is -1, (No such device or address)
drmOpenDevice: Open failed
[drm] failed to load kernel module "fglrx"
(WW) fglrx(0): Failed to open DRM connection
(--) fglrx(0): VideoRAM: 131072 kByte, Type: DDR SGRAM / SDRAM
(II) fglrx(0): AGP card detected
(WW) fglrx(0): board is an unknown third party board, chipset is supported
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Reloading /usr/lib/xorg/modules/libddc.so
(II) fglrx(0): Connected Display1: CRT on secondary DAC
(II) fglrx(0): Display1 EDID data ---------------------------
(II) fglrx(0): Manufacturer: PHL Model: c005 Serial#: 9712
(II) fglrx(0): Year: 2003 Week: 35
(II) fglrx(0): EDID Version: 1.3
(II) fglrx(0): Analog Display Input, Input Voltage Level: 0.700/0.300 V
(II) fglrx(0): Signal levels configurable
(II) fglrx(0): Sync: Separate Composite SyncOnGreenSerration on. V.Sync Pulse req. if CompSync or SyncOnGreen
(II) fglrx(0): Max H-Image Size [cm]: horiz.: 34 vert.: 27
(II) fglrx(0): Gamma: 2.20
(II) fglrx(0): DPMS capabilities: StandBy Suspend Off; RGB/Color Display
(II) fglrx(0): Default color space is primary color space
(II) fglrx(0): First detailed timing is preferred mode
(II) fglrx(0): redX: 0.633 redY: 0.336 greenX: 0.300 greenY: 0.586
(II) fglrx(0): blueX: 0.146 blueY: 0.103 whiteX: 0.313 whiteY: 0.329
(II) fglrx(0): Supported VESA Video Modes:
(II) fglrx(0): 720x400@70Hz
(II) fglrx(0): 640x480@60Hz
(II) fglrx(0): 640x480@67Hz
(II) fglrx(0): 640x480@72Hz
(II) fglrx(0): 640x480@75Hz
(II) fglrx(0): 800x600@56Hz
(II) fglrx(0): 800x600@60Hz
(II) fglrx(0): 800x600@72Hz
(II) fglrx(0): 800x600@75Hz
(II) fglrx(0): 832x624@75Hz
(II) fglrx(0): 1024x768@60Hz
(II) fglrx(0): 1024x768@70Hz
(II) fglrx(0): 1024x768@75Hz
(II) fglrx(0): 1280x1024@75Hz
(II) fglrx(0): 1152x870@75Hz
(II) fglrx(0): Manufacturer's mask: 0
(II) fglrx(0): Supported Future Video Modes:
(II) fglrx(0): #0: hsize: 1152 vsize 864 refresh: 70 vid: 19057
(II) fglrx(0): #1: hsize: 1152 vsize 864 refresh: 75 vid: 20337
(II) fglrx(0): #2: hsize: 1280 vsize 960 refresh: 60 vid: 16513
(II) fglrx(0): #3: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
(II) fglrx(0): Supported additional Video Mode:
(II) fglrx(0): clock: 108.0 MHz Image Size: 338 x 270 mm
(II) fglrx(0): h_active: 1280 h_sync: 1328 h_sync_end 1440 h_blank_end 1688 h_border: 0
(II) fglrx(0): v_active: 1024 v_sync: 1025 v_sync_end 1028 v_blanking: 1066 v_border: 0
(II) fglrx(0): Serial No: HD 009712
(II) fglrx(0): Monitor name: Philips 170C4
(II) fglrx(0): Ranges: V min: 56 V max: 76 Hz, H min: 30 H max: 82 kHz, PixClock max 140 MHz
(II) fglrx(0): End of Display1 EDID data --------------------
(II) fglrx(0): Primary Controller - CRT on secondary DAC
(II) fglrx(0): Internal Desktop Setting: 0x00000008
(II) fglrx(0): POWERplay version 3. 1 power state available:
(II) fglrx(0): 1. 398/297MHz @ 50Hz [enable load balancing]
(==) fglrx(0): Qbs disabled
(==) fglrx(0): FAST_SWAP disabled
(==) fglrx(0): PseudoColor visuals disabled
(==) fglrx(0): Using gamma correction (1.0, 1.0, 1.0)
(==) fglrx(0): Center Mode is disabled
(==) fglrx(0): TMDS coherent mode is enabled
(II) fglrx(0): Total of 32 modes found for primary display.
(--) fglrx(0): Virtual size is 1280x1024 (pitch 0)
(**) fglrx(0): *Mode "1280x1024": 135.0 MHz (scaled from 0.0 MHz), 80.0 kHz, 75.0 Hz
(II) fglrx(0): Modeline "1280x1024" 135.00 1280 1296 1440 1688 1024 1025 1028 1066
(**) fglrx(0): Default mode "1280x1024": 128.9 MHz (scaled from 0.0 MHz), 74.6 kHz, 70.0 Hz
(II) fglrx(0): Modeline "1280x1024" 128.94 1280 1368 1504 1728 1024 1025 1028 1066 +hsync
(**) fglrx(0): Default mode "1280x1024": 108.0 MHz (scaled from 0.0 MHz), 64.0 kHz, 60.0 Hz
(II) fglrx(0): Modeline "1280x1024" 108.00 1280 1328 1440 1688 1024 1025 1028 1066
(**) fglrx(0): *Mode "1152x864": 108.0 MHz (scaled from 0.0 MHz), 67.5 kHz, 75.0 Hz
(II) fglrx(0): Modeline "1152x864" 108.00 1152 1216 1344 1600 864 865 868 900
(**) fglrx(0): Default mode "1152x864": 96.8 MHz (scaled from 0.0 MHz), 63.0 kHz, 70.0 Hz
(II) fglrx(0): Modeline "1152x864" 96.76 1152 1224 1344 1536 864 865 868 900 +hsync
(**) fglrx(0): Default mode "1152x864": 81.6 MHz (scaled from 0.0 MHz), 53.7 kHz, 60.0 Hz
(II) fglrx(0): Modeline "1152x864" 81.62 1152 1216 1336 1520 864 865 868 895 +hsync
(**) fglrx(0): *Mode "1024x768": 78.8 MHz (scaled from 0.0 MHz), 60.0 kHz, 75.0 Hz
(II) fglrx(0): Modeline "1024x768" 78.75 1024 1040 1136 1312 768 769 772 800
(**) fglrx(0): Default mode "1024x768": 78.4 MHz (scaled from 0.0 MHz), 57.7 kHz, 72.0 Hz
(II) fglrx(0): Modeline "1024x768" 78.43 1024 1080 1192 1360 768 769 772 801 +hsync
(**) fglrx(0): Default mode "1024x768": 75.0 MHz (scaled from 0.0 MHz), 56.5 kHz, 70.0 Hz
(II) fglrx(0): Modeline "1024x768" 75.00 1024 1048 1184 1328 768 771 777 806 +hsync +vsync
(**) fglrx(0): Default mode "1024x768": 65.0 MHz (scaled from 0.0 MHz), 48.4 kHz, 60.0 Hz
(II) fglrx(0): Modeline "1024x768" 65.00 1024 1048 1184 1344 768 771 777 806 +hsync +vsync
(**) fglrx(0): *Mode "800x600": 49.5 MHz (scaled from 0.0 MHz), 46.9 kHz, 75.0 Hz
(II) fglrx(0): Modeline "800x600" 49.50 800 816 896 1056 600 601 604 625
(**) fglrx(0): Default mode "800x600": 50.0 MHz (scaled from 0.0 MHz), 48.1 kHz, 72.0 Hz
(II) fglrx(0): Modeline "800x600" 50.00 800 856 976 1040 600 637 643 666
(**) fglrx(0): Default mode "800x600": 45.5 MHz (scaled from 0.0 MHz), 43.8 kHz, 70.0 Hz
(II) fglrx(0): Modeline "800x600" 45.50 800 840 920 1040 600 601 604 625 +hsync
(**) fglrx(0): Default mode "800x600": 40.0 MHz (scaled from 0.0 MHz), 37.9 kHz, 60.0 Hz
(II) fglrx(0): Modeline "800x600" 40.00 800 840 968 1056 600 601 605 628
(**) fglrx(0): Default mode "800x600": 36.0 MHz (scaled from 0.0 MHz), 35.2 kHz, 56.0 Hz
(II) fglrx(0): Modeline "800x600" 36.00 800 824 896 1024 600 601 603 625
(**) fglrx(0): Default mode "800x600": 29.6 MHz (scaled from 0.0 MHz), 29.8 kHz, 47.0 Hz (I)
(II) fglrx(0): Modeline "800x600" 29.60 800 816 896 992 600 601 604 635 interlace +hsync
(**) fglrx(0): *Mode "640x480": 31.5 MHz (scaled from 0.0 MHz), 37.5 kHz, 75.0 Hz
(II) fglrx(0): Modeline "640x480" 31.50 640 656 720 840 480 481 484 500 +hsync +vsync
(**) fglrx(0): Default mode "640x480": 31.5 MHz (scaled from 0.0 MHz), 37.9 kHz, 72.0 Hz
(II) fglrx(0): Modeline "640x480" 31.50 640 664 704 832 480 489 492 520 +hsync +vsync
(**) fglrx(0): Default mode "640x480": 25.2 MHz (scaled from 0.0 MHz), 31.5 kHz, 60.0 Hz
(II) fglrx(0): Modeline "640x480" 25.18 640 656 752 800 480 490 492 525 +hsync +vsync
(**) fglrx(0): Default mode "1024x480": 38.2 MHz (scaled from 0.0 MHz), 29.8 kHz, 60.0 Hz
(II) fglrx(0): Modeline "1024x480" 38.16 1024 1048 1152 1280 480 481 484 497 +hsync
(**) fglrx(0): Default mode "848x480": 31.5 MHz (scaled from 0.0 MHz), 29.8 kHz, 60.0 Hz
(II) fglrx(0): Modeline "848x480" 31.48 848 864 952 1056 480 481 484 497 +hsync
(**) fglrx(0): Default mode "720x576": 32.7 MHz (scaled from 0.0 MHz), 35.8 kHz, 60.0 Hz
(II) fglrx(0): Modeline "720x576" 32.66 720 744 816 912 576 577 580 597 +hsync
(**) fglrx(0): Default mode "720x480": 26.7 MHz (scaled from 0.0 MHz), 29.8 kHz, 60.0 Hz
(II) fglrx(0): Modeline "720x480" 26.71 720 736 808 896 480 481 484 497 +hsync
(**) fglrx(0): Default mode "640x400": 28.1 MHz (scaled from 0.0 MHz), 33.7 kHz, 75.0 Hz
(II) fglrx(0): Modeline "640x400" 28.07 640 696 736 832 400 413 415 449
(**) fglrx(0): Default mode "640x400": 24.9 MHz (scaled from 0.0 MHz), 31.5 kHz, 60.0 Hz
(II) fglrx(0): Modeline "640x400" 24.92 640 664 760 792 400 460 462 525
(**) fglrx(0): Default mode "512x384": 19.8 MHz (scaled from 0.0 MHz), 29.8 kHz, 60.0 Hz
(II) fglrx(0): Modeline "512x384" 19.81 512 544 624 664 384 451 453 497
(**) fglrx(0): Default mode "400x300": 24.8 MHz (scaled from 0.0 MHz), 46.9 kHz, 75.0 Hz (D)
(II) fglrx(0): Modeline "400x300" 24.75 400 408 448 528 300 601 602 625 doublescan
(**) fglrx(0): Default mode "400x300": 22.3 MHz (scaled from 0.0 MHz), 45.0 kHz, 60.0 Hz (D)
(II) fglrx(0): Modeline "400x300" 22.33 400 416 480 496 300 601 605 742 doublescan
(**) fglrx(0): Default mode "320x240": 15.8 MHz (scaled from 0.0 MHz), 37.9 kHz, 75.0 Hz (D)
(II) fglrx(0): Modeline "320x240" 15.75 320 328 360 416 240 481 482 501 doublescan
(**) fglrx(0): Default mode "320x240": 12.6 MHz (scaled from 0.0 MHz), 31.5 kHz, 60.0 Hz (D)
(II) fglrx(0): Modeline "320x240" 12.59 320 328 376 400 240 491 493 525 doublescan
(**) fglrx(0): Default mode "320x200": 13.1 MHz (scaled from 0.0 MHz), 31.5 kHz, 75.0 Hz (D)
(II) fglrx(0): Modeline "320x200" 13.10 320 352 368 416 200 406 407 417 doublescan
(**) fglrx(0): Default mode "320x200": 12.6 MHz (scaled from 0.0 MHz), 31.5 kHz, 60.0 Hz (D)
(II) fglrx(0): Modeline "320x200" 12.59 320 336 384 400 200 457 459 524 doublescan
(--) fglrx(0): Display dimensions: (340, 270) mm
(--) fglrx(0): DPI set to (95, 96)
(--) fglrx(0): Virtual size is 1280x1024 (pitch 1280)
(**) fglrx(0): *Mode "1280x1024": 135.0 MHz (scaled from 0.0 MHz), 80.0 kHz, 75.0 Hz
(II) fglrx(0): Modeline "1280x1024" 135.00 1280 1296 1440 1688 1024 1025 1028 1066
(**) fglrx(0): Default mode "1280x1024": 128.9 MHz (scaled from 0.0 MHz), 74.6 kHz, 70.0 Hz
(II) fglrx(0): Modeline "1280x1024" 128.94 1280 1368 1504 1728 1024 1025 1028 1066 +hsync
(**) fglrx(0): Default mode "1280x1024": 108.0 MHz (scaled from 0.0 MHz), 64.0 kHz, 60.0 Hz
(II) fglrx(0): Modeline "1280x1024" 108.00 1280 1328 1440 1688 1024 1025 1028 1066
(**) fglrx(0): *Mode "1152x864": 108.0 MHz (scaled from 0.0 MHz), 67.5 kHz, 75.0 Hz
(II) fglrx(0): Modeline "1152x864" 108.00 1152 1216 1344 1600 864 865 868 900
(**) fglrx(0): Default mode "1152x864": 96.8 MHz (scaled from 0.0 MHz), 63.0 kHz, 70.0 Hz
(II) fglrx(0): Modeline "1152x864" 96.76 1152 1224 1344 1536 864 865 868 900 +hsync
(**) fglrx(0): Default mode "1152x864": 81.6 MHz (scaled from 0.0 MHz), 53.7 kHz, 60.0 Hz
(II) fglrx(0): Modeline "1152x864" 81.62 1152 1216 1336 1520 864 865 868 895 +hsync
(**) fglrx(0): *Mode "1024x768": 78.8 MHz (scaled from 0.0 MHz), 60.0 kHz, 75.0 Hz
(II) fglrx(0): Modeline "1024x768" 78.75 1024 1040 1136 1312 768 769 772 800
(**) fglrx(0): Default mode "1024x768": 78.4 MHz (scaled from 0.0 MHz), 57.7 kHz, 72.0 Hz
(II) fglrx(0): Modeline "1024x768" 78.43 1024 1080 1192 1360 768 769 772 801 +hsync
(**) fglrx(0): Default mode "1024x768": 75.0 MHz (scaled from 0.0 MHz), 56.5 kHz, 70.0 Hz
(II) fglrx(0): Modeline "1024x768" 75.00 1024 1048 1184 1328 768 771 777 806 +hsync +vsync
(**) fglrx(0): Default mode "1024x768": 65.0 MHz (scaled from 0.0 MHz), 48.4 kHz, 60.0 Hz
(II) fglrx(0): Modeline "1024x768" 65.00 1024 1048 1184 1344 768 771 777 806 +hsync +vsync
(**) fglrx(0): *Mode "800x600": 49.5 MHz (scaled from 0.0 MHz), 46.9 kHz, 75.0 Hz
(II) fglrx(0): Modeline "800x600" 49.50 800 816 896 1056 600 601 604 625
(**) fglrx(0): Default mode "800x600": 50.0 MHz (scaled from 0.0 MHz), 48.1 kHz, 72.0 Hz
(II) fglrx(0): Modeline "800x600" 50.00 800 856 976 1040 600 637 643 666
(**) fglrx(0): Default mode "800x600": 45.5 MHz (scaled from 0.0 MHz), 43.8 kHz, 70.0 Hz
(II) fglrx(0): Modeline "800x600" 45.50 800 840 920 1040 600 601 604 625 +hsync
(**) fglrx(0): Default mode "800x600": 40.0 MHz (scaled from 0.0 MHz), 37.9 kHz, 60.0 Hz
(II) fglrx(0): Modeline "800x600" 40.00 800 840 968 1056 600 601 605 628
(**) fglrx(0): Default mode "800x600": 36.0 MHz (scaled from 0.0 MHz), 35.2 kHz, 56.0 Hz
(II) fglrx(0): Modeline "800x600" 36.00 800 824 896 1024 600 601 603 625
(**) fglrx(0): Default mode "800x600": 29.6 MHz (scaled from 0.0 MHz), 29.8 kHz, 47.0 Hz (I)
(II) fglrx(0): Modeline "800x600" 29.60 800 816 896 992 600 601 604 635 interlace +hsync
(**) fglrx(0): *Mode "640x480": 31.5 MHz (scaled from 0.0 MHz), 37.5 kHz, 75.0 Hz
(II) fglrx(0): Modeline "640x480" 31.50 640 656 720 840 480 481 484 500 +hsync +vsync
(**) fglrx(0): Default mode "640x480": 31.5 MHz (scaled from 0.0 MHz), 37.9 kHz, 72.0 Hz
(II) fglrx(0): Modeline "640x480" 31.50 640 664 704 832 480 489 492 520 +hsync +vsync
(**) fglrx(0): Default mode "640x480": 25.2 MHz (scaled from 0.0 MHz), 31.5 kHz, 60.0 Hz
(II) fglrx(0): Modeline "640x480" 25.18 640 656 752 800 480 490 492 525 +hsync +vsync
(**) fglrx(0): Default mode "1024x480": 38.2 MHz (scaled from 0.0 MHz), 29.8 kHz, 60.0 Hz
(II) fglrx(0): Modeline "1024x480" 38.16 1024 1048 1152 1280 480 481 484 497 +hsync
(**) fglrx(0): Default mode "848x480": 31.5 MHz (scaled from 0.0 MHz), 29.8 kHz, 60.0 Hz
(II) fglrx(0): Modeline "848x480" 31.48 848 864 952 1056 480 481 484 497 +hsync
(**) fglrx(0): Default mode "720x576": 32.7 MHz (scaled from 0.0 MHz), 35.8 kHz, 60.0 Hz
(II) fglrx(0): Modeline "720x576" 32.66 720 744 816 912 576 577 580 597 +hsync
(**) fglrx(0): Default mode "720x480": 26.7 MHz (scaled from 0.0 MHz), 29.8 kHz, 60.0 Hz
(II) fglrx(0): Modeline "720x480" 26.71 720 736 808 896 480 481 484 497 +hsync
(**) fglrx(0): Default mode "640x400": 28.1 MHz (scaled from 0.0 MHz), 33.7 kHz, 75.0 Hz
(II) fglrx(0): Modeline "640x400" 28.07 640 696 736 832 400 413 415 449
(**) fglrx(0): Default mode "640x400": 24.9 MHz (scaled from 0.0 MHz), 31.5 kHz, 60.0 Hz
(II) fglrx(0): Modeline "640x400" 24.92 640 664 760 792 400 460 462 525
(**) fglrx(0): Default mode "512x384": 19.8 MHz (scaled from 0.0 MHz), 29.8 kHz, 60.0 Hz
(II) fglrx(0): Modeline "512x384" 19.81 512 544 624 664 384 451 453 497
(**) fglrx(0): Default mode "400x300": 24.8 MHz (scaled from 0.0 MHz), 46.9 kHz, 75.0 Hz (D)
(II) fglrx(0): Modeline "400x300" 24.75 400 408 448 528 300 601 602 625 doublescan
(**) fglrx(0): Default mode "400x300": 22.3 MHz (scaled from 0.0 MHz), 45.0 kHz, 60.0 Hz (D)
(II) fglrx(0): Modeline "400x300" 22.33 400 416 480 496 300 601 605 742 doublescan
(**) fglrx(0): Default mode "320x240": 15.8 MHz (scaled from 0.0 MHz), 37.9 kHz, 75.0 Hz (D)
(II) fglrx(0): Modeline "320x240" 15.75 320 328 360 416 240 481 482 501 doublescan
(**) fglrx(0): Default mode "320x240": 12.6 MHz (scaled from 0.0 MHz), 31.5 kHz, 60.0 Hz (D)
(II) fglrx(0): Modeline "320x240" 12.59 320 328 376 400 240 491 493 525 doublescan
(**) fglrx(0): Default mode "320x200": 13.1 MHz (scaled from 0.0 MHz), 31.5 kHz, 75.0 Hz (D)
(II) fglrx(0): Modeline "320x200" 13.10 320 352 368 416 200 406 407 417 doublescan
(**) fglrx(0): Default mode "320x200": 12.6 MHz (scaled from 0.0 MHz), 31.5 kHz, 60.0 Hz (D)
(II) fglrx(0): Modeline "320x200" 12.59 320 336 384 400 200 457 459 524 doublescan
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules/libfb.so
(II) Module fb: vendor="X.Org Foundation"
compiled for 7.1.1, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.3
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Loading /usr/lib/xorg/modules/libramdac.so
(II) Module ramdac: vendor="X.Org Foundation"
compiled for 7.1.1, module version = 0.1.0
ABI class: X.Org Video Driver, version 1.0
(==) fglrx(0): NoAccel = NO
(II) Loading sub module "xaa"
(II) LoadModule: "xaa"
(II) Loading /usr/lib/xorg/modules/libxaa.so
(II) Module xaa: vendor="X.Org Foundation"
compiled for 7.1.1, module version = 1.2.0
ABI class: X.Org Video Driver, version 1.0
(==) fglrx(0): HPV inactive
(==) fglrx(0): FSAA enabled: NO
(==) fglrx(0): FSAA Gamma enabled
(==) fglrx(0): FSAA Multisample Position is fix
(==) fglrx(0): NoDRI = NO
(II) Loading sub module "fglrxdrm"
(II) LoadModule: "fglrxdrm"
(II) Loading /usr/lib/xorg/modules/linux/libfglrxdrm.so
(II) Module fglrxdrm: vendor="FireGL - ATI Technologies Inc."
compiled for 7.1.0, module version = 8.28.8
ABI class: X.Org Server Extension, version 0.3
(II) fglrx(0): Depth moves disabled by default
(==) fglrx(0): Capabilities: 0x00000000
(==) fglrx(0): CapabilitiesEx: 0x00000000
(==) fglrx(0): cpuFlags: 0x4000000f
(==) fglrx(0): cpuSpeedMHz: 0x000005f9
(==) fglrx(0): OpenGL ClientDriverName: "fglrx_dri.so"
(==) fglrx(0): UseFastTLS=0
(==) fglrx(0): BlockSignalsOnLock=1
(==) fglrx(0): EnablePrivateBackZ = NO
(--) Depth 24 pixmap format is 32 bpp
(II) do I need RAC? No, I don't.
(II) resource ranges after preInit:
[0] 0 0 0xe9000000 - 0xe900ffff (0x10000) MX[b]
[1] 0 0 0xc0000000 - 0xcfffffff (0x10000000) MX[b]
[2] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
[3] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[4] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[5] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[6] -1 0 0xeb000000 - 0xeb0003ff (0x400) MX[b]
[7] -1 0 0xeb001000 - 0xeb0010ff (0x100) MX[b]
[8] -1 0 0xe0000000 - 0xdfffffff (0x0) MX[b]O
[9] -1 0 0xe9000000 - 0xe900ffff (0x10000) MX[b](B)
[10] -1 0 0xc0000000 - 0xcfffffff (0x10000000) MX[b](B)
[11] -1 0 0xe9010000 - 0xe901ffff (0x10000) MX[b](B)
[12] -1 0 0xd0000000 - 0xdfffffff (0x10000000) MX[b](B)
[13] 0 0 0x000a0000 - 0x000affff (0x10000) MS[b](OprU)
[14] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[b](OprU)
[15] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[b](OprU)
[16] 0 0 0x0000c000 - 0x0000c0ff (0x100) IX[b]
[17] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[18] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
[19] -1 0 0x0000e400 - 0x0000e4ff (0x100) IX[b]
[20] -1 0 0x0000e000 - 0x0000e0ff (0x100) IX[b]
[21] -1 0 0x0000dc00 - 0x0000dc0f (0x10) IX[b]
[22] -1 0 0x0000d800 - 0x0000d81f (0x20) IX[b]
[23] -1 0 0x0000d400 - 0x0000d41f (0x20) IX[b]
[24] -1 0 0x0000d000 - 0x0000d01f (0x20) IX[b]
[25] -1 0 0x0000c000 - 0x0000c0ff (0x100) IX[b](B)
[26] 0 0 0x000003b0 - 0x000003bb (0xc) IS[b](OprU)
[27] 0 0 0x000003c0 - 0x000003df (0x20) IS[b](OprU)
(II) fglrx(0): UMM Bus area: 0xc0701000 (size=0x078ff000)
(II) fglrx(0): UMM area: 0xc0701000 (size=0x078ff000)
(II) fglrx(0): driver needs X.org 7.1.x.y with x.y >= 0.0
(II) fglrx(0): detected X.org 7.1.1.0
(II) Loading extension ATIFGLRXDRI
(II) fglrx(0): doing DRIScreenInit
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is -1, (No such device or address)
drmOpenDevice: open result is -1, (No such device or address)
drmOpenDevice: Open failed
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is -1, (No such device or address)
drmOpenDevice: open result is -1, (No such device or address)
drmOpenDevice: Open failed
[drm] failed to load kernel module "fglrx"
(II) fglrx(0): [drm] drmOpen failed
(EE) fglrx(0): DRIScreenInit failed!
(WW) fglrx(0): ***********************************************
(WW) fglrx(0): * DRI initialization failed! *
(WW) fglrx(0): * (maybe driver kernel module missing or bad) *
(WW) fglrx(0): * 2D acceleraton available (MMIO) *
(WW) fglrx(0): * no 3D acceleration available *
(WW) fglrx(0): ********************************************* *
(II) fglrx(0): FBADPhys: 0xc0000000 FBMappedSize: 0x08000000
(==) fglrx(0): Write-combining range (0xc0000000,0x8000000)
(II) fglrx(0): FBMM initialized for area (0,0)-(1280,8191)
(II) fglrx(0): FBMM auto alloc for area (0,0)-(1280,1024) (front color buffer - assumption)
(==) fglrx(0): Backing store disabled
(==) fglrx(0): Silken mouse enabled
(**) fglrx(0): DPMS enabled
(II) fglrx(0): Using XFree86 Acceleration Architecture (XAA)
Screen to screen bit blits
Solid filled rectangles
Solid Horizontal and Vertical Lines
Offscreen Pixmaps
Setting up tile and stipple cache:
32 128x128 slots
32 256x256 slots
16 512x512 slots
(II) fglrx(0): Acceleration enabled
(II) fglrx(0): Direct rendering disabled
(==) fglrx(0): Using hardware cursor
(II) fglrx(0): Largest offscreen area available: 1280 x 7163
(**) fglrx(0): Video overlay enabled on CRTC1
(II) Loading extension FGLRXEXTENSION
(II) Loading extension ATITVOUT
(==) RandR enabled
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-APPGROUP
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension XFree86-Bigfont
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) Initializing built-in extension XEVIE
(EE) AIGLX: Screen 0 is not DRI capable
(II) Loading local sub module "GLcore"
(II) LoadModule: "GLcore"
(II) Loading /usr/lib/xorg/modules/extensions/libGLcore.so
(II) Module GLcore: vendor="X.Org Foundation"
compiled for 7.1.1, module version = 1.0.0
ABI class: X.Org Server Extension, version 0.3
(II) GLX: Initialized MESA-PROXY GL provider for screen 0
error opening security policy file /usr/lib/xserver/SecurityPolicy
(**) Option "CoreKeyboard"
(**) Generic Keyboard: Core Keyboard
(**) Option "Protocol" "standard"
(**) Generic Keyboard: Protocol: standard
(**) Option "AutoRepeat" "500 30"
(**) Option "XkbRules" "xorg"
(**) Generic Keyboard: XkbRules: "xorg"
(**) Option "XkbModel" "pc105"
(**) Generic Keyboard: XkbModel: "pc105"
(**) Option "XkbLayout" "fr"
(**) Generic Keyboard: XkbLayout: "fr"
(**) Option "XkbVariant" "latin9"
(**) Generic Keyboard: XkbVariant: "latin9"
(**) Option "CustomKeycodes" "off"
(**) Generic Keyboard: CustomKeycodes disabled
(**) Option "Protocol" "ExplorerPS/2"
(**) Configured Mouse: Device: "/dev/input/mice"
(**) Configured Mouse: Protocol: "ExplorerPS/2"
(**) Option "CorePointer"
(**) Configured Mouse: Core Pointer
(**) Option "Device" "/dev/input/mice"
(**) Option "Emulate3Buttons" "true"
(**) Configured Mouse: Emulate3Buttons, Emulate3Timeout: 50
(**) Option "ZAxisMapping" "4 5"
(**) Configured Mouse: ZAxisMapping: buttons 4 and 5
(**) Configured Mouse: Buttons: 9
(**) Option "SendCoreEvents"
(**) stylus: always reports core events
(**) stylus device is /dev/wacom
(**) stylus is in absolute mode
(**) stylus: forcing TabletPC ISD V4 protocol
(**) WACOM: suppress value is 2
(**) Option "BaudRate" "9600"
(**) stylus: serial speed 9600
(**) Option "SendCoreEvents"
(**) cursor: always reports core events
(**) cursor device is /dev/wacom
(**) cursor is in relative mode
(**) cursor: forcing TabletPC ISD V4 protocol
(**) WACOM: suppress value is 2
(**) Option "BaudRate" "9600"
(**) cursor: serial speed 9600
(**) Option "SendCoreEvents"
(**) eraser: always reports core events
(**) eraser device is /dev/wacom
(**) eraser is in absolute mode
(**) eraser: forcing TabletPC ISD V4 protocol
(**) WACOM: suppress value is 2
(**) Option "BaudRate" "9600"
(**) eraser: serial speed 9600
(II) XINPUT: Adding extended input device "eraser" (type: Wacom Eraser)
(II) XINPUT: Adding extended input device "cursor" (type: Wacom Cursor)
(II) XINPUT: Adding extended input device "stylus" (type: Wacom Stylus)
(II) XINPUT: Adding extended input device "Configured Mouse" (type: MOUSE)
(II) XINPUT: Adding extended input device "Generic Keyboard" (type: KEYBOARD)
xkb_keycodes { include "xfree86+aliases(azerty)" };
xkb_types { include "complete" };
xkb_compatibility { include "complete" };
xkb_symbols { include "pc(pc105)+fr(latin9)" };
xkb_geometry { include "pc(pc105)" };
(**) Option "Device" "/dev/wacom"
(EE) xf86OpenSerial: Cannot open device /dev/wacom
No such file or directory.
Error opening /dev/wacom : Invalid argument
(EE) xf86OpenSerial: Cannot open device /dev/wacom
No such file or directory.
Error opening /dev/wacom : Invalid argument
(**) Option "Device" "/dev/wacom"
(EE) xf86OpenSerial: Cannot open device /dev/wacom
No such file or directory.
Error opening /dev/wacom : Invalid argument
(EE) xf86OpenSerial: Cannot open device /dev/wacom
No such file or directory.
Error opening /dev/wacom : Invalid argument
(**) Option "Device" "/dev/wacom"
(EE) xf86OpenSerial: Cannot open device /dev/wacom
No such file or directory.
Error opening /dev/wacom : Invalid argument
(EE) xf86OpenSerial: Cannot open device /dev/wacom
No such file or directory.
Error opening /dev/wacom : Invalid argument
(II) Configured Mouse: ps2EnableDataReporting: succeeded
Could not init font path element /usr/share/fonts/X11/TTF/, removing from list!
Could not init font path element /usr/share/fonts/X11/OTF, removing from list!
Could not init font path element /usr/share/fonts/X11/CID/, removing from list!
xkb_types { include "%" };
xkb_compatibility { include "%" };
xkb_symbols { include "%" };
xkb_geometry { include "%" };
(EE) Error loading keymap /var/lib/xkb/server-0.xkm
AUDIT: Wed Nov 1 19:52:35 2006: 4159 X: client 26 rejected from local host
AUDIT: Wed Nov 1 19:52:35 2006: 4159 X: client 27 rejected from local host
AUDIT: Wed Nov 1 20:01:09 2006: 4159 X: client 26 rejected from local host
AUDIT: Wed Nov 1 20:01:09 2006: 4159 X: client 26 rejected from local host
AUDIT: Wed Nov 1 20:01:10 2006: 4159 X: client 26 rejected from local host
AUDIT: Wed Nov 1 20:33:09 2006: 4159 X: client 18 rejected from local host
AUDIT: Wed Nov 1 20:33:09 2006: 4159 X: client 18 rejected from local host
AUDIT: Wed Nov 1 20:33:09 2006: 4159 X: client 18 rejected from local host
AUDIT: Wed Nov 1 20:33:59 2006: 4159 X: client 18 rejected from local host
AUDIT: Wed Nov 1 20:33:59 2006: 4159 X: client 18 rejected from local host
AUDIT: Wed Nov 1 20:33:59 2006: 4159 X: client 18 rejected from local host
Error in "UpdateFile" -4
Error in "UpdateFile" -4
AUDIT: Wed Nov 1 22:34:49 2006: 4159 X: client 20 rejected from local host
AUDIT: Wed Nov 1 22:34:49 2006: 4159 X: client 20 rejected from local host
AUDIT: Wed Nov 1 22:34:49 2006: 4159 X: client 20 rejected from local host
AUDIT: Wed Nov 1 22:35:09 2006: 4159 X: client 20 rejected from local host
AUDIT: Wed Nov 1 22:35:09 2006: 4159 X: client 20 rejected from local host
AUDIT: Wed Nov 1 22:35:09 2006: 4159 X: client 20 rejected from local host
AUDIT: Wed Nov 1 22:44:48 2006: 4159 X: client 23 rejected from local host
AUDIT: Wed Nov 1 22:44:48 2006: 4159 X: client 23 rejected from local host
AUDIT: Wed Nov 1 22:44:49 2006: 4159 X: client 23 rejected from local hostMême topo quand je fais fglrxinfo : Les drivers Mesapour opengl.
display: :0.0 screen: 0
OpenGL vendor string: Mesa project: www.mesa3d.org
OpenGL renderer string: Mesa GLX Indirect
OpenGL version string: 1.2 (1.5 Mesa 6.5.1)Je vous mets mon xorg.conf au cas où ça vous inspire qqch.
Section "ServerLayout"
Identifier "Default Layout"
Screen "Default Screen" 0 0
InputDevice "Generic Keyboard"
InputDevice "Configured Mouse"
InputDevice "stylus" "SendCoreEvents"
InputDevice "cursor" "SendCoreEvents"
InputDevice "eraser" "SendCoreEvents"
EndSection
Section "Files"
# path to defoma fonts
FontPath "/usr/share/X11/fonts/misc"
FontPath "/usr/share/X11/fonts/cyrillic"
FontPath "/usr/share/X11/fonts/100dpi/:unscaled"
FontPath "/usr/share/X11/fonts/75dpi/:unscaled"
FontPath "/usr/share/X11/fonts/Type1"
FontPath "/usr/share/X11/fonts/100dpi"
FontPath "/usr/share/X11/fonts/75dpi"
FontPath "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
EndSection
Section "Module"
Load "i2c"
Load "bitmap"
Load "ddc"
Load "dri"
Load "extmod"
Load "freetype"
Load "glx"
Load "int10"
Load "type1"
Load "vbe"
EndSection
Section "InputDevice"
Identifier "Generic Keyboard"
Driver "kbd"
Option "CoreKeyboard"
Option "XkbRules" "xorg"
Option "XkbModel" "pc105"
Option "XkbLayout" "fr"
Option "XkbVariant" "latin9"
EndSection
Section "InputDevice"
Identifier "Configured Mouse"
Driver "mouse"
Option "CorePointer"
Option "Device" "/dev/input/mice"
Option "Protocol" "ExplorerPS/2"
Option "ZAxisMapping" "4 5"
Option "Emulate3Buttons" "true"
EndSection
Section "InputDevice"
# /dev/input/event
# for USB
Identifier "stylus"
Driver "wacom"
Option "Device" "/dev/wacom" # Change to
Option "Type" "stylus"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection
Section "InputDevice"
# /dev/input/event
# for USB
Identifier "eraser"
Driver "wacom"
Option "Device" "/dev/wacom" # Change to
Option "Type" "eraser"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection
Section "InputDevice"
# /dev/input/event
# for USB
Identifier "cursor"
Driver "wacom"
Option "Device" "/dev/wacom" # Change to
Option "Type" "cursor"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection
Section "Monitor"
Identifier "Philips 170C"
Option "DPMS"
EndSection
Section "Device"
Identifier "ATI Technologies, Inc. RV350 AP [Radeon 9600]"
Driver "fglrx"
Option "VideoOverlay" "on"
Option "OpenGLOverlay" "off"
BusID "PCI:1:0:0"
EndSection
Section "Screen"
Identifier "Default Screen"
Device "ATI Technologies, Inc. RV350 AP [Radeon 9600]"
Monitor "Philips 170C"
DefaultDepth 24
SubSection "Display"
Depth 1
Modes "1280x1024" "1280x960" "1152x864" "1024x768" "832x624" "800x600" "720x400" "640x480"
EndSubSection
SubSection "Display"
Depth 4
Modes "1280x1024" "1280x960" "1152x864" "1024x768" "832x624" "800x600" "720x400" "640x480"
EndSubSection
SubSection "Display"
Depth 8
Modes "1280x1024" "1280x960" "1152x864" "1024x768" "832x624" "800x600" "720x400" "640x480"
EndSubSection
SubSection "Display"
Depth 15
Modes "1280x1024" "1280x960" "1152x864" "1024x768" "832x624" "800x600" "720x400" "640x480"
EndSubSection
SubSection "Display"
Depth 16
Modes "1280x1024" "1280x960" "1152x864" "1024x768" "832x624" "800x600" "720x400" "640x480"
EndSubSection
SubSection "Display"
Depth 24
Modes "1280x1024" "1280x960" "1152x864" "1024x768" "832x624" "800x600" "720x400" "640x480"
EndSubSection
EndSection
Section "DRI"
Mode 0666
EndSection
Section "Extensions"
Option "Composite" "0"
EndSectionBref je suis exactement dans la même m****.
Je suis en train de charger l'image DVD de kubuntu pour une install propre parce que là je suis désespéré.
J'arrive même pas à passer aux drivers libres. Dans ce cas là mon serveur graphique plante au démarrage.
Bon courage. Je suis les infos au cas où. Le temps de charger l'iso DVD.
Kubuntu 20.04.1 LTS | AMD Ryzen 5-1500X | CM Gigabyte AB350-Gaming3 | RAM 2*4Go GSKILL DDR4 | SSD Samsung 860 Evo 1To+ 850 Evo 500Go | CG MSI Geforce GTX1050TI 4Go | Écran BenQ FP91GX | Clavier Logitech solar wireless | Logitech G502 Lightspeed | Boitier Thermaltake Suppressor F31 | Wacom Bamboo Fun CTH-461 | NAS Synology Ds216 2*2To
Hors ligne
#23 Le 02/11/2006, à 00:12
- mr_pouit
Re : Driver ATI ne marche plus apres mise a jour du système
[drm] failed to load kernel module "fglrx"
Il n'arrive pas à charger le module.
Es-tu sûr d'avoir installé les linux-restricted modules correspondant à la version de ton noyau ?
Que renvoie cette commande ?
$ dpkg --get-selections linux-restricted-modules-$(uname -r)Hors ligne
#24 Le 02/11/2006, à 12:11
- Djrem
Re : Driver ATI ne marche plus apres mise a jour du système
Apparemment pour moi ils sont bien installés
voici :
$ dpkg --get-selections linux-restricted-modules-$(uname -r)
linux-restricted-modules-2.6.17-10-386 installKubuntu 20.04.1 LTS | AMD Ryzen 5-1500X | CM Gigabyte AB350-Gaming3 | RAM 2*4Go GSKILL DDR4 | SSD Samsung 860 Evo 1To+ 850 Evo 500Go | CG MSI Geforce GTX1050TI 4Go | Écran BenQ FP91GX | Clavier Logitech solar wireless | Logitech G502 Lightspeed | Boitier Thermaltake Suppressor F31 | Wacom Bamboo Fun CTH-461 | NAS Synology Ds216 2*2To
Hors ligne
#25 Le 04/11/2006, à 00:42
- Bouchet
Re : Driver ATI ne marche plus apres mise a jour du système
specialement moi aussi a la migration pas d'acceleration 3D sur ma petit ati radeon 9700 de mon portable . de toute facon je m'en servirai pas mais.
J'ai suivit le tuto et tout marche nikel juste une petite ligne a rajoute a la fin je join mon xorg.conf si ca peux aider des gens
Section "ServerLayout"
# InputDevice "stylus" "SendCoreEvents"
# InputDevice "cursor" "SendCoreEvents"
# InputDevice "eraser" "SendCoreEvents"
Identifier "Default Layout"
Screen 0 "aticonfig-Screen[0]" 0 0
InputDevice "Generic Keyboard"
InputDevice "Configured Mouse"
InputDevice "Synaptics Touchpad"
EndSection
Section "Files"
# path to defoma fonts
FontPath "/usr/share/X11/fonts/misc"
FontPath "/usr/share/X11/fonts/cyrillic"
FontPath "/usr/share/X11/fonts/100dpi/:unscaled"
FontPath "/usr/share/X11/fonts/75dpi/:unscaled"
FontPath "/usr/share/X11/fonts/Type1"
FontPath "/usr/share/X11/fonts/100dpi"
FontPath "/usr/share/X11/fonts/75dpi"
FontPath "/usr/share/fonts/X11/misc"
FontPath "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
EndSection
Section "Module"
Load "i2c"
Load "bitmap"
Load "ddc"
Load "dri"
Load "extmod"
Load "freetype"
Load "glx"
Load "int10"
Load "type1"
Load "vbe"
Load "synaptics"
EndSection
Section "InputDevice"
Identifier "Generic Keyboard"
Driver "kbd"
Option "CoreKeyboard"
Option "XkbRules" "xorg"
Option "XkbModel" "pc105"
Option "XkbLayout" "fr"
Option "XkbVariant" "latin9"
Option "XkbOptions" "lv3:ralt_switch"
EndSection
Section "InputDevice"
Identifier "Configured Mouse"
Driver "mouse"
Option "CorePointer"
Option "Device" "/dev/input/mice"
Option "Protocol" "ExplorerPS/2"
Option "ZAxisMapping" "4 5"
Option "Emulate3Buttons" "true"
EndSection
Section "InputDevice"
Identifier "Synaptics Touchpad"
Driver "synaptics"
Option "SendCoreEvents" "true"
Option "Device" "/dev/psaux"
Option "Protocol" "auto-dev"
Option "HorizScrollDelta" "0"
Option "ShmConfig" "true"
EndSection
Section "Monitor"
Identifier "Generic Monitor"
HorizSync 28.0 - 50.0
VertRefresh 43.0 - 75.0
Option "DPMS"
EndSection
Section "Monitor"
Identifier "aticonfig-Monitor[0]"
Option "VendorName" "ATI Proprietary Driver"
Option "ModelName" "Generic Autodetecting Monitor"
Option "DPMS" "true"
EndSection
Section "Device"
Identifier "ATI Technologies, Inc. RV350 NP [Mobility Radeon 9600/9700 M10/M11]"
Driver "ati"
BusID "PCI:1:0:0"
EndSection
Section "Device"
Identifier "aticonfig-Device[0]"
Driver "fglrx"
Option "PseudoColorVisuals" "off"
Option "OpenGLOverlay" "off"
Option "VideoOverlay" "on"
EndSection
Section "Screen"
Identifier "Default Screen"
Device "ATI Technologies, Inc. RV350 NP [Mobility Radeon 9600/9700 M10/M11]"
Monitor "Generic Monitor"
DefaultDepth 24
SubSection "Display"
Depth 1
Modes "1400x1050" "1024x768" "800x600" "640x480"
EndSubSection SubSection "Display"
Depth 4
Modes "1400x1050" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 8
Modes "1400x1050" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 15
Modes "1400x1050" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 16
Modes "1400x1050" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 24
Modes "1400x1050" "1024x768" "800x600" "640x480"
EndSubSection
EndSection
Section "Screen"
Identifier "aticonfig-Screen[0]"
Device "aticonfig-Device[0]"
Monitor "aticonfig-Monitor[0]"
DefaultDepth 24
SubSection "Display"
Viewport 0 0
Depth 24
Modes "1400x1050" "800x600"
EndSubSection
EndSection
Section "DRI"
Mode 0666
EndSection
Section "Extensions"
Option "Composite" "disable"
EndSection
j'ai peut etre modifie 2, 3 truc a la main je sais plus mais ca marche
fglrxinfo
display: :0.0 screen: 0
OpenGL vendor string: ATI Technologies Inc.
OpenGL renderer string: MOBILITY RADEON 9700 Generic
OpenGL version string: 2.0.6011 (8.28.8)
Hors ligne