Ubuntu-fr

Teofifil

[Résolu]Carte multi port USB 2

Bonjour,

Ne disposant initialement que de 2 entrées usb j'ai décidé de monter une carte interne me permettant d'avoir 4 ports usb supplémentaires. Cependant pour l'instant elle n'est pas prise en charge par dapper.

Si je fait lsusb j'obtiens:

Bus 003 Device 001: ID 0000:0000
Bus 001 Device 003: ID 1110:9031 Analog Devices Canada, Ltd (Allied Telesyn)
Bus 001 Device 001: ID 0000:0000
Bus 002 Device 001: ID 0000:0000

et dmesg | grep usb:

[17179579.020000] usbcore: registered new driver usbfs
[17179579.020000] usbcore: registered new driver hub
[17179580.132000] usb 1-1: new full speed USB device using ohci_hcd and address 3
[17179591.180000] usb 1-1: [ueagle-atm] ADSL device founded vid (0X1110) pid (0X 9031) : Eagle III
[17179591.356000] usb 1-1: reset full speed USB device using ohci_hcd and addres s 3
[17179591.636000] usb 1-1: [ueagle-atm] using iso mode
[17179591.636000] usb 1-1: [ueagle-atm] (re)booting started
[17179591.636000] usb 1-1: [ueagle-atm] created proc entry at: /proc/driver/ueag le-atm/001-003
[17179591.640000] usbcore: registered new driver ueagle-atm
[17179606.912000] usb 1-1: [ueagle-atm] modem operational
[17179606.920000] usb 1-1: [ueagle-atm] ATU-R firmware version : 44e2ea17

Auriez-vous une ou plusieurs idées à me soumettre. Par avance merci.

Dernière modification par Teofifil (Le 12/08/2006, à 22:17)

Teofifil

Re : [Résolu]Carte multi port USB 2

Bonjour,

En fait le titre aurait du être: INSTALLATION D'UNE CARTE CONTROLEUR USB2

Le problème a été résolu en essayant un autre lieu de branchement de la carte.
A titre d'info pour ceux qui rencontreraient des difficultés voici la réponse aux commandes:

lsusb
Bus 006 Device 003: ID 04b4:6830 Cypress Semiconductor Corp. USB-2.0 IDE AdapterBus 006 Device 001: ID 0000:0000
Bus 005 Device 001: ID 0000:0000
Bus 004 Device 001: ID 0000:0000
Bus 003 Device 004: ID 1110:9031 Analog Devices Canada, Ltd (Allied Telesyn)
Bus 003 Device 001: ID 0000:0000
Bus 001 Device 001: ID 0000:0000
Bus 002 Device 001: ID 0000:0000

et

dmesg | grep usb
[17179576.084000] usbcore: registered new driver usbfs
[17179576.084000] usbcore: registered new driver hub
[17179576.800000] usb 3-1: new full speed USB device using uhci_hcd and address 2
[17179577.676000] usb 6-2: new high speed USB device using ehci_hcd and address 3
[17179578.048000] usb 3-1: new full speed USB device using uhci_hcd and address 3
[17179589.852000] usb 3-1: [ueagle-atm] ADSL device founded vid (0X1110) pid (0X9032) : Eagle III
[17179589.964000] usb 3-1: reset full speed USB device using uhci_hcd and address 3
[17179590.100000] usb 3-1: [ueagle-atm] pre-firmware device, uploading firmware
[17179590.100000] usb 3-1: [ueagle-atm] loading firmware ueagle-atm/eagleIII.fw
[17179590.100000] usbcore: registered new driver ueagle-atm
[17179590.688000] usb-storage: device found at 3
[17179590.688000] usb-storage: waiting for device to settle before scanning
[17179590.688000] usbcore: registered new driver usb-storage
[17179590.932000] usb 3-1: [ueagle-atm] firmware uploaded
[17179591.180000] usb 3-1: USB disconnect, address 3
[17179593.424000] usb 3-1: new full speed USB device using uhci_hcd and address 4
[17179593.620000] usb 3-1: [ueagle-atm] ADSL device founded vid (0X1110) pid (0X9031) : Eagle III
[17179593.732000] usb 3-1: reset full speed USB device using uhci_hcd and address 4
[17179593.928000] usb 3-1: [ueagle-atm] using iso mode
[17179593.928000] usb 3-1: [ueagle-atm] created proc entry at: /proc/driver/ueagle-atm/003-004
[17179593.928000] usb 3-1: [ueagle-atm] (re)booting started
[17179595.692000] usb-storage: device scan complete
[17179612.364000] usb 3-1: [ueagle-atm] modem operational
[17179612.376000] usb 3-1: [ueagle-atm] ATU-R firmware version : 44e2ea17