lecteur mp3

vfremit · Le 29/05/2005, à 17:04

je me suis acheter un lecteur mp3 avant d'instaler ubuntu. évidement il marcher sur windows mais sur ubuntu le programme ne fonctionne plus !!! y a t'il un solution !! car je ne pe plus mettre de mp3 dessus !

wake · Le 29/05/2005, à 19:40

humm, à moin qu'il y ai des personnes averc des pouvoirs telekinetiques sur le forum, il va falloir que tu fournisses plus d'info.

Marque model, USB - firewire enfin tout ce que tu sais sur ton problème.

si c'est sur usb regardes ce que tu peux voir avec un lsusb dans un terminal

@ bon entendeur...

Dernière modification par wake (Le 29/05/2005, à 19:41)

vfremit · Le 29/05/2005, à 20:19

C UN AIWA HZ WS 2000 AVEC UNE CONNECTION USB ! désoler mé je suis pa treé doué avec ubuntu ! je commence juste ! si tu veux dotre info que joré pu oublié ! jee te lé donneré otut de suite !

wake · Le 29/05/2005, à 21:07

pas sure mais je pense qu'il devrait étre monter tout seul, comme un disque dur.
Regarde s'il y a un/une nouvelle icone (je sais pas si on dit un ou une ) sur le bureau quand tu branches ton lecteur.
Va voir sous /media/ si tu trouves qq chose qui peux être ton lecteur.

Pour ce qui est du programme dont tu parles, il y a peut de chance qu'il marche sous ubuntu/linux. c pas la peine d'essayer d'installer le programe sur le cd livré avec.:|

Si cela ne marche pas tape la commande

lsusb

dans un terminal et copie la réponse ici.

Cougar · Le 30/05/2005, à 14:30

Coucou vfremit !

Essaie de respecter un peu plus ces 2 règles du forum la prochiane fois:
* Dis bonjour, avant de foncer sur ton problême
* Exprime toi dans un français correct

Merci, ça sera plus agrébale pour tout le monde

vfremit · Le 30/05/2005, à 20:09

Je m'excuse si je né pa respecté les régles du forum A l'avenir j'y ferais attention merci pour le conseille!!

fraide · Le 30/05/2005, à 20:14

wake · Le 30/05/2005, à 22:58

Et pour ton lecteur MP3 ça avance? tiens nous au courant, même avec quelques fautes de frappes

vfremit · Le 31/05/2005, à 18:09

non ca navance pas du tout ! il n'est même plus detecté quand je branche en usb !

wake · Le 01/06/2005, à 20:28

encore une fois, peux-tu nous donner plus d'info, encore une fois la télépathie c pas mon point fort

Dernière modification par wake (Le 02/06/2005, à 00:05)

Polo · Le 01/06/2005, à 21:14

une fois le lecteur branché. poste les dernières lignes que te renvoie la commande dmesg (les dernières lignes, ca peut etre pas mal.. genre une 10aine)

vfremit · Le 03/06/2005, à 12:01

Merci beaucoup de vouloir maider et pour etre sur que tu ne manque pa d'information je vais te donner tous ce que ca a afficher!!

968k reserved, 667k data, 140k init, 0k highmem)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay loop... 3956.73 BogoMIPS
Security Scaffold v1.0.0 initialized
Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
CPU: After generic identify, caps: 0383fbff c1cbfbff 00000000 00000000
CPU: After vendor identify, caps: 0383fbff c1cbfbff 00000000 00000000
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 512K (64 bytes/line)
CPU: After all inits, caps: 0383fbff c1cbfbff 00000000 00000020
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU: AMD Sempron(tm) 3000+ stepping 00
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
enabled ExtINT on CPU#0
ESR value before enabling vector: 00000000
ESR value after enabling vector: 00000000
ENABLING IO-APIC IRQs
init IO_APIC IRQs
IO-APIC (apicid-pin) 2-0, 2-16, 2-17, 2-18, 2-19, 2-20, 2-21, 2-22, 2-23 not connected.
..TIMER: vector=0x31 pin1=2 pin2=-1
Using local APIC timer interrupts.
calibrating APIC timer ...
..... CPU clock speed is 1999.0506 MHz.
..... host bus clock speed is 333.0250 MHz.
checking if image is initramfs...it isn't (ungzip failed); looks like an initrd
Freeing initrd memory: 4308k freed
NET: Registered protocol family 16
PCI: PCI BIOS revision 2.10 entry at 0xfbcc0, last bus=1
PCI: Using configuration type 1
mtrr: v2.0 (20020519)
ACPI: Subsystem revision 20040326
ACPI: Interpreter enabled
ACPI: Using IOAPIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (00:00)
PCI: Probing PCI hardware (bus 00)
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 6 7 *10 11 12)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 6 7 10 *11 12)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 6 7 10 11 12) *5
ACPI: PCI Interrupt Link [LNKD] (IRQs *3 4 6 7 10 11 12)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 6 7 10 11 12) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 6 7 10 11 12) *0, disabled.
ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 6 7 10 11 12) *0, disabled.
ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 6 7 10 11 12) *0, disabled.
ACPI: PCI Interrupt Link [ALKA] (IRQs 20) *0
ACPI: PCI Interrupt Link [ALKB] (IRQs 21) *0
ACPI: PCI Interrupt Link [ALKC] (IRQs 22) *0
ACPI: PCI Interrupt Link [ALKD] (IRQs 23) *0
Linux Plug and Play Support v0.97 (c) Adam Belay
PnPBIOS: Scanning system for PnP BIOS support...
PnPBIOS: Found PnP BIOS installation structure at 0xc00fc790
PnPBIOS: PnP BIOS version 1.0, entry 0xf0000:0xc7c0, dseg 0xf0000
pnp: 00:0b: ioport range 0x3f0-0x3f1 has been reserved
PnPBIOS: 14 nodes reported by PnP BIOS; 14 recorded by driver
00:00:08[A] -> 2-16 -> IRQ 16 level low
00:00:08[b] -> 2-17 -> IRQ 17 level low
00:00:08[C] -> 2-18 -> IRQ 18 level low
00:00:08[D] -> 2-19 -> IRQ 19 level low
ACPI: PCI Interrupt Link [ALKB] BIOS reported IRQ 0, using IRQ 21
ACPI: PCI Interrupt Link [ALKB] enabled at IRQ 21
00:00:10[A] -> 2-21 -> IRQ 21 level low
ACPI: PCI Interrupt Link [ALKA] BIOS reported IRQ 0, using IRQ 20
ACPI: PCI Interrupt Link [ALKA] enabled at IRQ 20
00:00:11[A] -> 2-20 -> IRQ 20 level low
ACPI: PCI Interrupt Link [ALKC] BIOS reported IRQ 0, using IRQ 22
ACPI: PCI Interrupt Link [ALKC] enabled at IRQ 22
00:00:11[C] -> 2-22 -> IRQ 22 level low
ACPI: PCI Interrupt Link [ALKD] BIOS reported IRQ 0, using IRQ 23
ACPI: PCI Interrupt Link [ALKD] enabled at IRQ 23
00:00:11[D] -> 2-23 -> IRQ 23 level low
number of MP IRQ sources: 15.
number of IO-APIC #2 registers: 24.
testing the IO APIC.......................
IO APIC #2......
.... register #00: 02000000
....... : physical APIC id: 02
....... : Delivery Type: 0
....... : LTS : 0
.... register #01: 00178003
....... : max redirection entries: 0017
....... : PRQ implemented: 1
....... : IO APIC version: 0003
.... IRQ redirection table:
NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect:
00 000 00 1 0 0 0 0 0 0 00
01 001 01 0 0 0 0 0 1 1 39
02 001 01 0 0 0 0 0 1 1 31
03 001 01 0 0 0 0 0 1 1 41
04 001 01 0 0 0 0 0 1 1 49
05 001 01 0 0 0 0 0 1 1 51
06 001 01 0 0 0 0 0 1 1 59
07 001 01 0 0 0 0 0 1 1 61
08 001 01 0 0 0 0 0 1 1 69
09 001 01 0 1 0 1 0 1 1 71
0a 001 01 0 0 0 0 0 1 1 79
0b 001 01 0 0 0 0 0 1 1 81
0c 001 01 0 0 0 0 0 1 1 89
0d 001 01 0 0 0 0 0 1 1 91
0e 001 01 0 0 0 0 0 1 1 99
0f 001 01 0 0 0 0 0 1 1 A1
10 001 01 1 1 0 1 0 1 1 A9
11 001 01 1 1 0 1 0 1 1 B1
12 001 01 1 1 0 1 0 1 1 B9
13 001 01 1 1 0 1 0 1 1 C1
14 001 01 1 1 0 1 0 1 1 D1
15 001 01 1 1 0 1 0 1 1 C9
16 001 01 1 1 0 1 0 1 1 D9
17 001 01 1 1 0 1 0 1 1 E1
IRQ to pin mappings:
IRQ0 -> 0:2
IRQ1 -> 0:1
IRQ3 -> 0:3
IRQ4 -> 0:4
IRQ5 -> 0:5
IRQ6 -> 0:6
IRQ7 -> 0:7
IRQ8 -> 0:8
IRQ9 -> 0:9
IRQ10 -> 0:10
IRQ11 -> 0:11
IRQ12 -> 0:12
IRQ13 -> 0:13
IRQ14 -> 0:14
IRQ15 -> 0:15
IRQ16 -> 0:16
IRQ17 -> 0:17
IRQ18 -> 0:18
IRQ19 -> 0:19
IRQ20 -> 0:20
IRQ21 -> 0:21
IRQ22 -> 0:22
IRQ23 -> 0:23
.................................... done.
PCI: Using ACPI for IRQ routing
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
devfs: 2004-01-31 Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x0
Initializing Cryptographic API
PCI: Via IRQ fixup for 0000:00:10.0, from 255 to 5
PCI: Via IRQ fixup for 0000:00:10.1, from 255 to 5
PCI: Via IRQ fixup for 0000:00:10.2, from 255 to 5
PCI: Via IRQ fixup for 0000:00:10.3, from 255 to 5
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Serial: 8250/16550 driver $Revision: 1.90 $ 48 ports, IRQ sharing enabled
ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize
serio: i8042 AUX port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
input: AT Translated Set 2 keyboard on isa0060/serio0
NET: Registered protocol family 2
IP: routing cache hash table of 4096 buckets, 32Kbytes
TCP: Hash tables configured (established 32768 bind 65536)
NET: Registered protocol family 8
NET: Registered protocol family 20
ACPI: (supports S0 S1 S3 S4 S5)
RAMDISK: cramfs filesystem found at block 0
RAMDISK: Loading 4308 blocks [1 disk] into ram disk... done.
VFS: Mounted root (cramfs filesystem) readonly.
Freeing unused kernel memory: 140k freed
vesafb: probe of vesafb0 failed with error -6
ACPI: Processor [CPU0] (supports C1)
ACPI: Thermal Zone [THRM] (49 C)
ACPI: Fan [FAN] (on)
NET: Registered protocol family 1
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
VIA8237SATA: IDE controller at PCI slot 0000:00:0f.0
VIA8237SATA: chipset revision 128
VIA8237SATA: 100% native mode on irq 20
ide2: BM-DMA at 0xbc00-0xbc07, BIOS settings: hde:DMA, hdf:pio
ide3: BM-DMA at 0xbc08-0xbc0f, BIOS settings: hdg:DMA, hdh:DMA
VP_IDE: IDE controller at PCI slot 0000:00:0f.1
VP_IDE: chipset revision 6
VP_IDE: not 100% native mode: will probe irqs later
VP_IDE: VIA vt8237 (rev 00) IDE UDMA133 controller on pci0000:00:0f.1
ide0: BM-DMA at 0xc400-0xc407, BIOS settings: hda:DMA, hdb:pio
ide1: BM-DMA at 0xc408-0xc40f, BIOS settings: hdc:DMA, hdd:DMA
hda: ST3160021A, ATA DISK drive
Using anticipatory io scheduler
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
hdc: HL-DT-STDVDRRW GWA-4083B, ATAPI CD/DVD-ROM drive
hdd: SAMSUNG DVD-ROM SD-616E, ATAPI CD/DVD-ROM drive
ide1 at 0x170-0x177,0x376 on irq 15
hda: max request size: 1024KiB
hda: 312581808 sectors (160041 MB) w/2048KiB Cache, CHS=19457/255/63, UDMA(100)
/dev/ide/host0/bus0/target0/lun0: p1 p2 p3
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
Adding 979956k swap on /dev/hda2. Priority:-1 extents:1
EXT3 FS on hda1, internal journal
SCSI subsystem initialized
mice: PS/2 mouse device common for all mice
hdc: ATAPI 40X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.20
hdd: ATAPI 40X DVD-ROM CD-MR drive, 512kB Cache, UDMA(33)
ieee1394: Initialized config rom entry `ip1394'
sbp2: $Rev: 1219 $ Ben Collins <bcollins@debian.org>
parport: PnPBIOS parport detected.
parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,EPP,ECP,DMA]
lp0: using parport0 (interrupt-driven).
Capability LSM initialized
device-mapper: 4.1.0-ioctl (2003-12-10) initialised: dm@uk.sistina.com
md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
device-mapper: : dm-linear: Device lookup failed

device-mapper: error adding target to table
device-mapper: : dm-linear: Device lookup failed

device-mapper: error adding target to table
kjournald starting. Commit interval 5 seconds
EXT3 FS on hda3, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
Real Time Clock Driver v1.12
input: PC Speaker
inserting floppy driver for 2.6.7-1-k7
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
Linux agpgart interface v0.100 (c) Dave Jones
agpgart: Detected VIA P4X600 chipset
agpgart: Maximum main memory to use for agp memory: 439M
agpgart: AGP aperture is 64M @ 0xe8000000
cpci_hotplug: CompactPCI Hot Plug Core version: 0.2
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: acpi_pciehprm:\_SB_.PCI0 evaluate _BBN fail=0x5
pciehp: acpi_pciehprm:get_device PCI ROOT HID fail=0x5
shpchp: acpi_shpchprm:\_SB_.PCI0 evaluate _BBN fail=0x5
shpchp: acpi_shpchprm:get_device PCI ROOT HID fail=0x5
ohci1394: $Rev: 1223 $ Ben Collins <bcollins@debian.org>
ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[19] MMIO=[ee001000-ee0017ff] Max Packet=[2048]
libata version 1.02 loaded.
usbcore: registered new driver usbfs
usbcore: registered new driver hub
USB Universal Host Controller Interface driver v2.2
uhci_hcd 0000:00:10.0: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller
uhci_hcd 0000:00:10.0: irq 21, io base 0000c800
uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 1
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
uhci_hcd 0000:00:10.1: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (#2)
uhci_hcd 0000:00:10.1: irq 21, io base 0000cc00
uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 2
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
uhci_hcd 0000:00:10.2: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (#3)
uhci_hcd 0000:00:10.2: irq 21, io base 0000d000
uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 3
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
ieee1394: Host added: ID:BUS[0-00:1023] GUID[00e0180000b41a57]
uhci_hcd 0000:00:10.3: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (#4)
uhci_hcd 0000:00:10.3: irq 21, io base 0000d400
uhci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 4
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
usb 3-2: new low speed USB device using address 2
usbcore: registered new driver hiddev
ehci_hcd 0000:00:10.4: VIA Technologies, Inc. USB 2.0
ehci_hcd 0000:00:10.4: irq 21, pci mem e0aa1000
ehci_hcd 0000:00:10.4: new USB bus registered, assigned bus number 5
ehci_hcd 0000:00:10.4: USB 2.0 enabled, EHCI 1.00, driver 2004-May-10
drivers/usb/input/hid-core.c: ctrl urb status -84 received
input: USB HID v1.00 Mouse [ARROW STRONG USB Mouse] on usb-0000:00:10.2-2
usbcore: registered new driver usbhid
drivers/usb/input/hid-core.c: v2.0:USB HID core driver
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 8 ports detected
usb 3-2: USB disconnect, address 2
ts: Compaq touchscreen protocol output
usb 3-2: new low speed USB device using address 3
via82xx: Assuming DXS channels with 48k fixed sample rate.
Please try dxs_support=1 or dxs_support=4 option
and report if it works on your machine.
PCI: Setting latency timer of device 0000:00:11.5 to 64
via-rhine.c:v1.10-LK1.1.20-2.6 May-23-2004 Written by Donald Becker
eth0: VIA VT6102 Rhine-II at 0xe000, 00:11:2f:df:26:7a, IRQ 23.
eth0: MII PHY found at address 1, status 0x7869 advertising 05e1 Link 41e1.
drivers/usb/input/hid-core.c: ctrl urb status -2 received
drivers/usb/input/hid-core.c: timeout initializing reports

input: USB HID v1.00 Mouse [ARROW STRONG USB Mouse] on usb-0000:00:10.2-2
eth0: Setting full-duplex based on MII #1 link partner capability of 41e1.
NET: Registered protocol family 17
NET: Registered protocol family 10
Disabled Privacy Extensions on device c02e27c0(lo)
IPv6 over IPv4 tunneling driver
ACPI: Power Button (FF) [PWRF]
eth0: no IPv6 routers present
udf: registering filesystem
UDF-fs: No VRS found
ISO 9660 Extensions: Microsoft Joliet Level 1
ISOFS: changing to secondary root
ehci_hcd 0000:00:10.4: port 5 reset error -110
hub 5-0:1.0: hub_port_status failed (err = -32)
usb 3-1: new full speed USB device using address 4
usb 3-1: device not accepting address 4, error -71
usb 3-1: new full speed USB device using address 5
usb 3-1: device not accepting address 5, error -71
hub 5-0:1.0: connect-debounce failed, port 5 disabled
usb 3-1: new full speed USB device using address 6
usb 3-1: device not accepting address 6, error -71
usb 3-1: new full speed USB device using address 7
usb 3-1: device not accepting address 7, error -71
ehci_hcd 0000:00:10.4: port 5 reset error -110
hub 5-0:1.0: hub_port_status failed (err = -32)

j'espére que ca pourra d'aider a résudre mon probléme et encore merci !!!

vfremit · Le 13/06/2005, à 00:08

je tien a remercier tout ce qui on aporter leur savoir pour m'aider a résoudre ce probléme !! maintenent mon probléme est résolut!! donc ce nest plous la peine de m'aider !!! merci

wake · Le 13/06/2005, à 00:30

Si le problème est résolu, super , désolé de ne pas avoir pu aider plus et plus vite ...

Juste deux petites choses:
Comment as-tu fait? c'était quoi l'astuce?

Mettre un petit [Résolu] dans le titre du post en modifiant ton premier message

@+

vfremit1 · Le 11/07/2005, à 14:00

pour résoudre mon probléme c tousimple vu que je ne pouver pa utiliser le programme du lecteur mp3 pour transferer mes music avec mon ordi qui etdonc exclusivement sous linux, je suis donc passer par un autre ordinateur qui utilise windob euhh pardn windows!! ce serapeut etre possible dans quelque année; l'orsque les programmateur se seront tous aperçu que l'avenir est sur linux et non sur windows !! Et ca viendra j'en suis sur !!
merci encore a tous ce qui mon aider!!

jib · Le 11/07/2005, à 14:25

Tu peus te loguer avec le menu en haut de la page...

Dernière modification par jib (Le 11/07/2005, à 14:25)

szdavid · Le 09/08/2005, à 06:59

Salut,

je profite de ce post pouyr poster mes proiblèmes...

Archos Jukebox XS200.
KJe le branche en usb, une fenêtre s'ouvre mais, après, impossible de parcourrir ou copier quoi que ce soit...

voici le dmesg qui s'affiche (uniquement la partie depuis la connexion) :

usb 4-1: new high speed USB device using ehci_hcd and address 3
Initializing USB Mass Storage driver...
scsi0 : SCSI emulation for USB Mass Storage devices
usbcore: registered new driver usb-storage
USB Mass Storage support registered.
usb-storage: device found at 3
usb-storage: waiting for device to settle before scanning
Vendor: USB-HS Model: HTC426020G7CE00 Rev: 0.01
Type: Direct-Access ANSI SCSI revision: 00
usb-storage: device scan complete
SCSI device sda: 39070080 512-byte hdwr sectors (20004 MB)
sda: assuming drive cache: write through
SCSI device sda: 39070080 512-byte hdwr sectors (20004 MB)
sda: assuming drive cache: write through
/dev/scsi/host0/bus0/target0/lun0: p1
Attached scsi disk sda at scsi0, channel 0, id 0, lun 0
FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will b e case sensitive!
SCSI error : <0 0 0 0> return code = 0x70000
end_request: I/O error, dev sda, sector 20185517
Buffer I/O error on device sda1, logical block 20185454
lost page write due to I/O error on sda1
SCSI error : <0 0 0 0> return code = 0x70000
end_request: I/O error, dev sda, sector 20185518
Buffer I/O error on device sda1, logical block 20185455
lost page write due to I/O error on sda1
SCSI error : <0 0 0 0> return code = 0x70000
end_request: I/O error, dev sda, sector 20185519
Buffer I/O error on device sda1, logical block 20185456
lost page write due to I/O error on sda1
SCSI error : <0 0 0 0> return code = 0x70000
end_request: I/O error, dev sda, sector 20185520
Buffer I/O error on device sda1, logical block 20185457
lost page write due to I/O error on sda1
SCSI error : <0 0 0 0> return code = 0x70000
end_request: I/O error, dev sda, sector 20185521
Buffer I/O error on device sda1, logical block 20185458
lost page write due to I/O error on sda1
SCSI error : <0 0 0 0> return code = 0x70000
end_request: I/O error, dev sda, sector 20185522
Buffer I/O error on device sda1, logical block 20185459
lost page write due to I/O error on sda1
SCSI error : <0 0 0 0> return code = 0x70000
end_request: I/O error, dev sda, sector 20185523
Buffer I/O error on device sda1, logical block 20185460
lost page write due to I/O error on sda1
SCSI error : <0 0 0 0> return code = 0x70000
end_request: I/O error, dev sda, sector 20185524
Buffer I/O error on device sda1, logical block 20185461
lost page write due to I/O error on sda1
SCSI error : <0 0 0 0> return code = 0x70000
end_request: I/O error, dev sda, sector 20185525
Buffer I/O error on device sda1, logical block 20185462
lost page write due to I/O error on sda1
SCSI error : <0 0 0 0> return code = 0x70000
end_request: I/O error, dev sda, sector 20185526
Buffer I/O error on device sda1, logical block 20185463
lost page write due to I/O error on sda1
SCSI error : <0 0 0 0> return code = 0x70000
end_request: I/O error, dev sda, sector 20185527
Buffer I/O error on device sda1, logical block 20185464
lost page write due to I/O error on sda1
SCSI error : <0 0 0 0> return code = 0x70000
end_request: I/O error, dev sda, sector 20185528
Buffer I/O error on device sda1, logical block 20185465
lost page write due to I/O error on sda1
SCSI error : <0 0 0 0> return code = 0x70000
end_request: I/O error, dev sda, sector 20185529
Buffer I/O error on device sda1, logical block 20185466
lost page write due to I/O error on sda1
SCSI error : <0 0 0 0> return code = 0x70000
end_request: I/O error, dev sda, sector 20185530
Buffer I/O error on device sda1, logical block 20185467
lost page write due to I/O error on sda1
SCSI error : <0 0 0 0> return code = 0x70000
end_request: I/O error, dev sda, sector 20185531
Buffer I/O error on device sda1, logical block 20185468
lost page write due to I/O error on sda1
SCSI error : <0 0 0 0> return code = 0x70000
end_request: I/O error, dev sda, sector 20185532
Buffer I/O error on device sda1, logical block 20185469
lost page write due to I/O error on sda1
SCSI error : <0 0 0 0> return code = 0x70000
end_request: I/O error, dev sda, sector 20185533
Buffer I/O error on device sda1, logical block 20185470
lost page write due to I/O error on sda1
SCSI error : <0 0 0 0> return code = 0x70000
end_request: I/O error, dev sda, sector 20185534
Buffer I/O error on device sda1, logical block 20185471
lost page write due to I/O error on sda1
SCSI error : <0 0 0 0> return code = 0x70000
end_request: I/O error, dev sda, sector 20185535
Buffer I/O error on device sda1, logical block 20185472
lost page write due to I/O error on sda1
SCSI error : <0 0 0 0> return code = 0x70000
end_request: I/O error, dev sda, sector 20185536
Buffer I/O error on device sda1, logical block 20185473
lost page write due to I/O error on sda1
SCSI error : <0 0 0 0> return code = 0x70000
end_request: I/O error, dev sda, sector 20185537
Buffer I/O error on device sda1, logical block 20185474
lost page write due to I/O error on sda1
SCSI error : <0 0 0 0> return code = 0x70000
end_request: I/O error, dev sda, sector 20185538
Buffer I/O error on device sda1, logical block 20185475
lost page write due to I/O error on sda1
SCSI error : <0 0 0 0> return code = 0x70000
end_request: I/O error, dev sda, sector 20185539
Buffer I/O error on device sda1, logical block 20185476
lost page write due to I/O error on sda1
SCSI error : <0 0 0 0> return code = 0x70000
end_request: I/O error, dev sda, sector 20185540
Buffer I/O error on device sda1, logical block 20185477
lost page write due to I/O error on sda1
SCSI error : <0 0 0 0> return code = 0x70000
end_request: I/O error, dev sda, sector 20185541
Buffer I/O error on device sda1, logical block 20185478
lost page write due to I/O error on sda1
SCSI error : <0 0 0 0> return code = 0x70000
end_request: I/O error, dev sda, sector 20185542
Buffer I/O error on device sda1, logical block 20185479
lost page write due to I/O error on sda1
SCSI error : <0 0 0 0> return code = 0x70000
end_request: I/O error, dev sda, sector 20185543
Buffer I/O error on device sda1, logical block 20185480
lost page write due to I/O error on sda1
SCSI error : <0 0 0 0> return code = 0x70000
end_request: I/O error, dev sda, sector 20185544
Buffer I/O error on device sda1, logical block 20185481
lost page write due to I/O error on sda1
SCSI error : <0 0 0 0> return code = 0x70000
end_request: I/O error, dev sda, sector 20185545
Buffer I/O error on device sda1, logical block 20185482
lost page write due to I/O error on sda1
SCSI error : <0 0 0 0> return code = 0x70000
end_request: I/O error, dev sda, sector 20185546
Buffer I/O error on device sda1, logical block 20185483
lost page write due to I/O error on sda1
SCSI error : <0 0 0 0> return code = 0x70000
end_request: I/O error, dev sda, sector 20185547
Buffer I/O error on device sda1, logical block 20185484
lost page write due to I/O error on sda1
SCSI error : <0 0 0 0> return code = 0x70000
end_request: I/O error, dev sda, sector 20185548
Buffer I/O error on device sda1, logical block 20185485
lost page write due to I/O error on sda1
SCSI error : <0 0 0 0> return code = 0x70000
end_request: I/O error, dev sda, sector 20185549
Buffer I/O error on device sda1, logical block 20185486
lost page write due to I/O error on sda1
SCSI error : <0 0 0 0> return code = 0x70000
end_request: I/O error, dev sda, sector 20185550
Buffer I/O error on device sda1, logical block 20185487
lost page write due to I/O error on sda1
SCSI error : <0 0 0 0> return code = 0x70000
end_request: I/O error, dev sda, sector 20185551
Buffer I/O error on device sda1, logical block 20185488
lost page write due to I/O error on sda1
SCSI error : <0 0 0 0> return code = 0x70000
end_request: I/O error, dev sda, sector 20185552
Buffer I/O error on device sda1, logical block 20185489
lost page write due to I/O error on sda1
SCSI error : <0 0 0 0> return code = 0x70000
end_request: I/O error, dev sda, sector 20185553
Buffer I/O error on device sda1, logical block 20185490
lost page write due to I/O error on sda1
SCSI error : <0 0 0 0> return code = 0x70000
end_request: I/O error, dev sda, sector 20185554
Buffer I/O error on device sda1, logical block 20185491
lost page write due to I/O error on sda1
SCSI error : <0 0 0 0> return code = 0x70000
end_request: I/O error, dev sda, sector 20185555
Buffer I/O error on device sda1, logical block 20185492
lost page write due to I/O error on sda1
SCSI error : <0 0 0 0> return code = 0x70000
end_request: I/O error, dev sda, sector 20185556
Buffer I/O error on device sda1, logical block 20185493
lost page write due to I/O error on sda1
SCSI error : <0 0 0 0> return code = 0x70000
end_request: I/O error, dev sda, sector 20185557
Buffer I/O error on device sda1, logical block 20185494
lost page write due to I/O error on sda1
SCSI error : <0 0 0 0> return code = 0x70000
end_request: I/O error, dev sda, sector 20185558
Buffer I/O error on device sda1, logical block 20185495
lost page write due to I/O error on sda1
SCSI error : <0 0 0 0> return code = 0x70000
end_request: I/O error, dev sda, sector 20185559
Buffer I/O error on device sda1, logical block 20185496
lost page write due to I/O error on sda1
SCSI error : <0 0 0 0> return code = 0x70000
end_request: I/O error, dev sda, sector 20185560
Buffer I/O error on device sda1, logical block 20185497
lost page write due to I/O error on sda1
SCSI error : <0 0 0 0> return code = 0x70000
end_request: I/O error, dev sda, sector 20185561
Buffer I/O error on device sda1, logical block 20185498
lost page write due to I/O error on sda1
SCSI error : <0 0 0 0> return code = 0x70000
end_request: I/O error, dev sda, sector 20185562
Buffer I/O error on device sda1, logical block 20185499
lost page write due to I/O error on sda1
SCSI error : <0 0 0 0> return code = 0x70000
end_request: I/O error, dev sda, sector 20185563
Buffer I/O error on device sda1, logical block 20185500
lost page write due to I/O error on sda1
SCSI error : <0 0 0 0> return code = 0x70000
end_request: I/O error, dev sda, sector 20185564
Buffer I/O error on device sda1, logical block 20185501
lost page write due to I/O error on sda1
SCSI error : <0 0 0 0> return code = 0x70000
end_request: I/O error, dev sda, sector 20185565
Buffer I/O error on device sda1, logical block 20185502
lost page write due to I/O error on sda1
SCSI error : <0 0 0 0> return code = 0x70000
end_request: I/O error, dev sda, sector 20185566
Buffer I/O error on device sda1, logical block 20185503
lost page write due to I/O error on sda1
SCSI error : <0 0 0 0> return code = 0x70000
end_request: I/O error, dev sda, sector 20185567
Buffer I/O error on device sda1, logical block 20185504
lost page write due to I/O error on sda1
SCSI error : <0 0 0 0> return code = 0x70000
end_request: I/O error, dev sda, sector 20185568
Buffer I/O error on device sda1, logical block 20185505
lost page write due to I/O error on sda1
SCSI error : <0 0 0 0> return code = 0x70000
end_request: I/O error, dev sda, sector 20185569
Buffer I/O error on device sda1, logical block 20185506
lost page write due to I/O error on sda1
SCSI error : <0 0 0 0> return code = 0x70000
end_request: I/O error, dev sda, sector 20185570
Buffer I/O error on device sda1, logical block 20185507
lost page write due to I/O error on sda1
SCSI error : <0 0 0 0> return code = 0x70000
end_request: I/O error, dev sda, sector 20185571
Buffer I/O error on device sda1, logical block 20185508
lost page write due to I/O error on sda1
SCSI error : <0 0 0 0> return code = 0x70000
end_request: I/O error, dev sda, sector 20185572
Buffer I/O error on device sda1, logical block 20185509
lost page write due to I/O error on sda1
SCSI error : <0 0 0 0> return code = 0x70000
end_request: I/O error, dev sda, sector 20185573
Buffer I/O error on device sda1, logical block 20185510
lost page write due to I/O error on sda1
SCSI error : <0 0 0 0> return code = 0x70000
end_request: I/O error, dev sda, sector 20185574
Buffer I/O error on device sda1, logical block 20185511
lost page write due to I/O error on sda1
SCSI error : <0 0 0 0> return code = 0x70000
end_request: I/O error, dev sda, sector 20185575
Buffer I/O error on device sda1, logical block 20185512
lost page write due to I/O error on sda1
SCSI error : <0 0 0 0> return code = 0x70000
end_request: I/O error, dev sda, sector 20185576
Buffer I/O error on device sda1, logical block 20185513
lost page write due to I/O error on sda1
SCSI error : <0 0 0 0> return code = 0x70000
end_request: I/O error, dev sda, sector 20185577
Buffer I/O error on device sda1, logical block 20185514
lost page write due to I/O error on sda1
SCSI error : <0 0 0 0> return code = 0x70000
end_request: I/O error, dev sda, sector 20185578
Buffer I/O error on device sda1, logical block 20185515
lost page write due to I/O error on sda1
SCSI error : <0 0 0 0> return code = 0x70000
end_request: I/O error, dev sda, sector 20185579
Buffer I/O error on device sda1, logical block 20185516
lost page write due to I/O error on sda1
SCSI error : <0 0 0 0> return code = 0x70000
end_request: I/O error, dev sda, sector 20185580
Buffer I/O error on device sda1, logical block 20185517
lost page write due to I/O error on sda1
SCSI error : <0 0 0 0> return code = 0x70000
end_request: I/O error, dev sda, sector 20185581
Buffer I/O error on device sda1, logical block 20185518
lost page write due to I/O error on sda1
SCSI error : <0 0 0 0> return code = 0x70000
end_request: I/O error, dev sda, sector 20185582
Buffer I/O error on device sda1, logical block 20185519
lost page write due to I/O error on sda1
SCSI error : <0 0 0 0> return code = 0x70000
end_request: I/O error, dev sda, sector 20185583
Buffer I/O error on device sda1, logical block 20185520
lost page write due to I/O error on sda1
SCSI error : <0 0 0 0> return code = 0x70000
end_request: I/O error, dev sda, sector 20185584
Buffer I/O error on device sda1, logical block 20185521
lost page write due to I/O error on sda1
SCSI error : <0 0 0 0> return code = 0x70000
end_request: I/O error, dev sda, sector 20185585
Buffer I/O error on device sda1, logical block 20185522
lost page write due to I/O error on sda1
SCSI error : <0 0 0 0> return code = 0x70000
end_request: I/O error, dev sda, sector 20185586
Buffer I/O error on device sda1, logical block 20185523
lost page write due to I/O error on sda1

J'ai tenté un

$ sudo mount -o remount,rw /dev/sda1 /media/JUKEBOX

mais ça fait comme pour le reste, ça reste sans bouger, à attendre, pas de message d'erreur,... mais le prompt ne se réaffiche pas, comme quand il est en train de réfléchir,...

Merci

voitats6 · Le 27/01/2008, à 23:31

Bonjour !

Tu as intérêt à lire les posts 5 tu 6 de

http://forum.ubuntu-fr.org/viewtopic.php?id=104150

(# Liste des forums
# Â» Matériel
# Â» Bus usb : 4 bus usb détectés (1 usb 2.0) mais 3 visibles sur le PC

Ubuntu-fr

Navigation

Liens de recherche

Annonce

#1 Le 29/05/2005, à 17:04

lecteur mp3

#2 Le 29/05/2005, à 19:40

Re : lecteur mp3

#3 Le 29/05/2005, à 20:19

Re : lecteur mp3

#4 Le 29/05/2005, à 21:07

Re : lecteur mp3

#5 Le 30/05/2005, à 14:30

Re : lecteur mp3

#6 Le 30/05/2005, à 20:09

Re : lecteur mp3

#7 Le 30/05/2005, à 20:14

Re : lecteur mp3

#8 Le 30/05/2005, à 22:58

Re : lecteur mp3

#9 Le 31/05/2005, à 18:09

Re : lecteur mp3

#10 Le 01/06/2005, à 20:28

Re : lecteur mp3

#11 Le 01/06/2005, à 21:14

Re : lecteur mp3

#12 Le 03/06/2005, à 12:01

Re : lecteur mp3

#13 Le 13/06/2005, à 00:08

Re : lecteur mp3

#14 Le 13/06/2005, à 00:30

Re : lecteur mp3

#15 Le 11/07/2005, à 14:00

Re : lecteur mp3

#16 Le 11/07/2005, à 14:25

Re : lecteur mp3

#17 Le 09/08/2005, à 06:59

Re : lecteur mp3

#18 Le 27/01/2008, à 23:31

Re : lecteur mp3

Pied de page des forums