Pages : 1
#1 Le 31/08/2006, à 14:22
- zoreye
[Resolu] i810 et accélération 3D
Bonjour,
Est-il possible d'activer l'accélération 3D avec un chipset i810 ?
Je suis sous dapper 1.06, j'ai bien xserver-xorg driver i810 1:1.4.1.3 pour Dapper installé. J'ai vérifié le Direct rendering est sur NO.
J'ai essayé de reconfigurer xorg mais il y a des choses dont je ne suis pas sûr. Voici le xorg.conf :
# /etc/X11/xorg.conf (xorg X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the /etc/X11/xorg.conf manual page.
# (Type "man /etc/X11/xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
# sudo dpkg-reconfigure -phigh xserver-xorg
Section "Files"
FontPath "/usr/share/X11/fonts/misc"
FontPath "/usr/share/X11/fonts/cyrillic"
FontPath "/usr/share/X11/fonts/100dpi/:unscaled"
FontPath "/usr/share/X11/fonts/75dpi/:unscaled"
FontPath "/usr/share/X11/fonts/Type1"
FontPath "/usr/share/X11/fonts/100dpi"
FontPath "/usr/share/X11/fonts/75dpi"
# path to defoma fonts
FontPath "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
EndSection
Section "Module"
Load "bitmap"
Load "ddc"
Load "dri"
Load "extmod"
Load "freetype"
Load "glx"
Load "int10"
Load "type1"
Load "vbe"
EndSection
Section "InputDevice"
Identifier "Generic Keyboard"
Driver "kbd"
Option "CoreKeyboard"
Option "XkbRules" "xorg"
Option "XkbModel" "pc105"
Option "XkbLayout" "fr"
Option "XkbVariant" "latin9"
EndSection
Section "InputDevice"
Identifier "Configured Mouse"
Driver "mouse"
Option "CorePointer"
Option "Device" "/dev/input/mice"
Option "Protocol" "ExplorerPS/2"
Option "ZAxisMapping" "4 5"
Option "Emulate3Buttons" "true"
EndSection
Section "InputDevice"
Driver "wacom"
Identifier "stylus"
Option "Device" "/dev/wacom" # Change to
# /dev/input/event
# for USB
Option "Type" "stylus"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection
Section "InputDevice"
Driver "wacom"
Identifier "eraser"
Option "Device" "/dev/wacom" # Change to
# /dev/input/event
# for USB
Option "Type" "eraser"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection
Section "InputDevice"
Driver "wacom"
Identifier "cursor"
Option "Device" "/dev/wacom" # Change to
# /dev/input/event
# for USB
Option "Type" "cursor"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection
Section "Device"
Identifier "Intel Corporation 82810E DC-133 CGC [Chipset Graphics Controller]"
Driver "i810"
BusID "PCI:0:1:0"
VideoRam 16000
EndSection
Section "Monitor"
Identifier "NEC V921"
Option "DPMS"
HorizSync 31-96
VertRefresh 55-160
EndSection
Section "Screen"
Identifier "Default Screen"
Device "Intel Corporation 82810E DC-133 CGC [Chipset Graphics Controller]"
Monitor "NEC V921"
DefaultDepth 24
SubSection "Display"
Depth 1
Modes "1600x1200" "1280x1024" "1280x960" "1152x864" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 4
Modes "1600x1200" "1280x1024" "1280x960" "1152x864" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 8
Modes "1600x1200" "1280x1024" "1280x960" "1152x864" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 15
Modes "1600x1200" "1280x1024" "1280x960" "1152x864" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 16
Modes "1600x1200" "1280x1024" "1280x960" "1152x864" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 24
Modes "1600x1200" "1280x1024" "1280x960" "1152x864" "1024x768" "800x600" "640x480"
EndSubSection
EndSection
Section "ServerLayout"
Identifier "Default Layout"
Screen "Default Screen"
InputDevice "Generic Keyboard"
InputDevice "Configured Mouse"
InputDevice "stylus" "SendCoreEvents"
InputDevice "cursor" "SendCoreEvents"
InputDevice "eraser" "SendCoreEvents"
EndSection
Section "DRI"
Mode 0666
EndSectionComme vous pouvez voir j'ai alloué 16 Mo à la mémoire vidéo (c'est trop ? pas assez ?), je n'ai que 256 Mo de RAM
j'ai essayé aussi d'installer le 915resolution comme indiqué dans le tuto mais je bloque là quand je fais
:
sudo 915resolution -l
Intel 800/900 Series VBIOS Hack : version 0.5.2
Intel chipset detected. However, 915resolution was unable to determine the chipset type.
Chipset Id: 71248086
Please report this problem to stomljen@yahoo.comMerci de votre aide
Dernière modification par zoreye (Le 02/09/2006, à 09:22)
Hors ligne
#2 Le 31/08/2006, à 17:13
- dylhoxic
Re : [Resolu] i810 et accélération 3D
Tu devrais poster le résultat de : dmesg et aussi le fichier /var/log/Xorg.0.log.
As-tu essayé en changeant la ligne suivante : DefaultDepth 24 --> DefaultDepth 16 et en allouant plsu de mémoire vidéo à ta carte graphique ?
Kubuntu++
Hors ligne
#3 Le 31/08/2006, à 19:24
- zoreye
Re : [Resolu] i810 et accélération 3D
Ok merci de ta réponse, alors voici dmesg :
remi@perso:~$ dmesg
[17179569.184000] Linux version 2.6.15-26-386 (buildd@terranova) (gcc version 4.0.3 (Ubuntu 4.0.3-1ubuntu5)) #1 PREEMPT Thu Aug 3 02:52:00 UTC 2006
[17179569.184000] BIOS-provided physical RAM map:
[17179569.184000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[17179569.184000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[17179569.184000] BIOS-e820: 00000000000ec000 - 0000000000100000 (reserved)
[17179569.184000] BIOS-e820: 0000000000100000 - 000000000fef0000 (usable)
[17179569.184000] BIOS-e820: 000000000fef0000 - 000000000fef8000 (ACPI data)
[17179569.184000] BIOS-e820: 000000000fef8000 - 000000000ff00000 (ACPI NVS)
[17179569.184000] BIOS-e820: 00000000fffe0000 - 0000000100000000 (reserved)
[17179569.184000] 0MB HIGHMEM available.
[17179569.184000] 254MB LOWMEM available.
[17179569.184000] On node 0 totalpages: 65264
[17179569.184000] DMA zone: 4096 pages, LIFO batch:0
[17179569.184000] DMA32 zone: 0 pages, LIFO batch:0
[17179569.184000] Normal zone: 61168 pages, LIFO batch:15
[17179569.184000] HighMem zone: 0 pages, LIFO batch:0
[17179569.184000] DMI 2.3 present.
[17179569.184000] ACPI: RSDP (v000 AMI ) @ 0x000f9d80
[17179569.184000] ACPI: RSDT (v001 AMIINT AMIITN09 0x00000010 MSFT 0x00000097) @ 0x0fef0000
[17179569.184000] ACPI: FADT (v001 AMIINT AMIITN09 0x00000011 MSFT 0x00000097) @ 0x0fef0030
[17179569.184000] ACPI: MADT (v001 AMIINT AMIITN09 0x00000009 MSFT 0x00000097) @ 0x0fef00c0
[17179569.184000] ACPI: DSDT (v001 INTEL WHITNEY 0x00001000 MSFT 0x0100000d) @ 0x00000000
[17179569.184000] ACPI: PM-Timer IO Port: 0x408
[17179569.184000] ACPI: Local APIC address 0xfee00000
[17179569.184000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[17179569.184000] Processor #0 6:11 APIC version 17
[17179569.184000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[17179569.184000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23[17179569.184000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[17179569.184000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[17179569.184000] ACPI: IRQ0 used by override.
[17179569.184000] ACPI: IRQ2 used by override.
[17179569.184000] ACPI: IRQ9 used by override.
[17179569.184000] Enabling APIC mode: Flat. Using 1 I/O APICs
[17179569.184000] Using ACPI (MADT) for SMP configuration information
[17179569.184000] Allocating PCI resources starting at 10000000 (gap: 0ff00000:f00e0000)
[17179569.184000] Built 1 zonelists
[17179569.184000] Kernel command line: root=/dev/hda3 ro quiet splash
[17179569.184000] mapped APIC to ffffd000 (fee00000)
[17179569.184000] mapped IOAPIC to ffffc000 (fec00000)
[17179569.184000] Initializing CPU#0
[17179569.184000] PID hash table entries: 1024 (order: 10, 16384 bytes)
[17179569.184000] Detected 1303.217 MHz processor.
[17179569.184000] Using pmtmr for high-res timesource
[17179569.184000] Console: colour VGA+ 80x25
[17179573.372000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
[17179573.372000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
[17179573.400000] Memory: 248372k/261056k available (1976k kernel code, 12152k reserved, 606k data, 288k init, 0k highmem)
[17179573.400000] Checking if this processor honours the WP bit even in supervisor mode... Ok.
[17179573.480000] Calibrating delay using timer specific routine.. 2608.34 BogoMIPS (lpj=5216691)
[17179573.480000] Security Framework v1.0.0 initialized
[17179573.480000] SELinux: Disabled at boot.
[17179573.480000] Mount-cache hash table entries: 512
[17179573.480000] CPU: After generic identify, caps: 0383fbff 00000000 00000000 00000000 00000000 00000000 00000000
[17179573.480000] CPU: After vendor identify, caps: 0383fbff 00000000 00000000 00000000 00000000 00000000 00000000
[17179573.480000] CPU: L1 I cache: 16K, L1 D cache: 16K
[17179573.480000] CPU: L2 cache: 256K
[17179573.480000] CPU: After all inits, caps: 0383fbff 00000000 00000000 00000040 00000000 00000000 00000000
[17179573.480000] mtrr: v2.0 (20020519)
[17179573.480000] CPU: Intel(R) Celeron(TM) CPU 1300MHz stepping 01
[17179573.480000] Enabling fast FPU save and restore... done.
[17179573.480000] Enabling unmasked SIMD FPU exception support... done.
[17179573.480000] Checking 'hlt' instruction... OK.
[17179573.496000] checking if image is initramfs... it is
[17179574.768000] Freeing initrd memory: 6617k freed
[17179574.816000] ACPI: Looking for DSDT ... not found!
[17179574.820000] ENABLING IO-APIC IRQs
[17179574.820000] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
[17179574.964000] NET: Registered protocol family 16
[17179574.964000] EISA bus registered
[17179574.964000] ACPI: bus type pci registered
[17179574.964000] PCI: PCI BIOS revision 2.10 entry at 0xfdb81, last bus=1
[17179574.964000] PCI: Using configuration type 1
[17179574.964000] ACPI: Subsystem revision 20051216
[17179574.972000] ACPI: Interpreter enabled
[17179574.972000] ACPI: Using IOAPIC for interrupt routing
[17179574.972000] ACPI: PCI Root Bridge [PCI0] (0000:00)
[17179574.972000] PCI: Probing PCI hardware (bus 00)
[17179574.976000] Boot video device is 0000:00:01.0
[17179574.976000] PCI quirk: region 0400-047f claimed by ICH4 ACPI/GPIO/TCO
[17179574.976000] PCI quirk: region 0480-04bf claimed by ICH4 GPIO
[17179574.976000] PCI: Transparent bridge - 0000:00:1e.0
[17179574.976000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[17179574.980000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.ICHB._PRT]
[17179574.988000] ACPI: Power Resource [URP1] (off)
[17179574.988000] ACPI: Power Resource [URP2] (off)
[17179574.988000] ACPI: Power Resource [FDDP] (off)
[17179574.988000] ACPI: Power Resource [LPTP] (off)
[17179574.988000] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
[17179574.988000] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
[17179574.988000] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
[17179574.988000] ACPI: PCI Interrupt Link [LNKD] (IRQs *11)
[17179574.988000] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
[17179574.988000] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
[17179574.992000] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
[17179574.992000] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
[17179574.992000] Linux Plug and Play Support v0.97 (c) Adam Belay
[17179574.992000] pnp: PnP ACPI init
[17179574.996000] pnp: PnP ACPI: found 12 devices
[17179574.996000] PnPBIOS: Disabled by ACPI PNP
[17179574.996000] PCI: Using ACPI for IRQ routing
[17179574.996000] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
[17179575.000000] PCI: Ignore bogus resource 6 [0:0] of 0000:00:01.0
[17179575.000000] PCI: Bridge: 0000:00:1e.0
[17179575.000000] IO window: c000-cfff
[17179575.000000] MEM window: efd00000-efdfffff
[17179575.000000] PREFETCH window: e7b00000-e7bfffff
[17179575.000000] PCI: Setting latency timer of device 0000:00:1e.0 to 64
[17179575.000000] audit: initializing netlink socket (disabled)
[17179575.000000] audit(1157042431.000:1): initialized
[17179575.000000] VFS: Disk quotas dquot_6.5.1
[17179575.000000] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[17179575.000000] Initializing Cryptographic API
[17179575.000000] io scheduler noop registered
[17179575.000000] io scheduler anticipatory registered
[17179575.000000] io scheduler deadline registered
[17179575.000000] io scheduler cfq registered
[17179575.004000] isapnp: Scanning for PnP cards...
[17179575.356000] isapnp: No Plug & Play device found
[17179575.392000] PNP: PS/2 Controller [PNP030b:PS2K] at 0x60,0x64 irq 1
[17179575.392000] PNP: PS/2 controller doesn't have AUX irq; using default 12
[17179575.404000] serio: i8042 AUX port at 0x60,0x64 irq 12
[17179575.404000] serio: i8042 KBD port at 0x60,0x64 irq 1
[17179575.404000] Serial: 8250/16550 driver $Revision: 1.90 $ 48 ports, IRQ sharing enabled
[17179575.404000] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[17179575.404000] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[17179575.412000] 00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[17179575.412000] 00:08: ttyS1 at I/O 0x2f8 (polled) is a 16550A
[17179575.412000] ACPI: PCI Interrupt 0000:00:1f.6[b] -> GSI 17 (level, low) -> IRQ 169
[17179575.412000] ACPI: PCI interrupt for device 0000:00:1f.6 disabled
[17179575.412000] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[17179575.412000] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[17179575.412000] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[17179575.412000] mice: PS/2 mouse device common for all mice
[17179575.416000] EISA: Probing bus 0 at eisa.0
[17179575.416000] EISA: Detected 0 cards.
[17179575.416000] NET: Registered protocol family 2
[17179575.452000] IP route cache hash table entries: 2048 (order: 1, 8192 bytes)[17179575.452000] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
[17179575.452000] TCP bind hash table entries: 8192 (order: 3, 32768 bytes)
[17179575.452000] TCP: Hash tables configured (established 8192 bind 8192)
[17179575.452000] TCP reno registered
[17179575.452000] TCP bic registered
[17179575.452000] NET: Registered protocol family 1
[17179575.452000] NET: Registered protocol family 8
[17179575.452000] NET: Registered protocol family 20
[17179575.452000] Using IPI Shortcut mode
[17179575.452000] ACPI wakeup devices:
[17179575.452000] PCI0 ICHB UAR1 USB USB2 AC97 MM97 SLPB
[17179575.452000] ACPI: (supports S0 S3 S4 S5)
[17179575.452000] Freeing unused kernel memory: 288k freed
[17179575.920000] input: AT Translated Set 2 keyboard as /class/input/input0
[17179575.984000] vga16fb: initializing
[17179575.984000] vga16fb: mapped to 0xc00a0000
[17179576.092000] Console: switching to colour frame buffer device 80x25
[17179576.092000] fb0: VGA16 VGA frame buffer device
[17179577.192000] Capability LSM initialized
[17179577.260000] ACPI: Processor [CPU1] (supports 8 throttling states)
[17179578.320000] ICH2: IDE controller at PCI slot 0000:00:1f.1
[17179578.320000] ICH2: chipset revision 5
[17179578.320000] ICH2: not 100% native mode: will probe irqs later
[17179578.320000] ide0: BM-DMA at 0xfc00-0xfc07, BIOS settings: hda:DMA, hdb:pio
[17179578.320000] ide1: BM-DMA at 0xfc08-0xfc0f, BIOS settings: hdc:DMA, hdd:DMA
[17179578.320000] Probing IDE interface ide0...
[17179578.608000] hda: ST340810A, ATA DISK drive
[17179579.280000] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[17179579.284000] Probing IDE interface ide1...
[17179580.020000] hdc: IDE-CD R/RW 24x10A, ATAPI CD/DVD-ROM drive
[17179580.804000] hdd: Pioneer DVD-ROM ATAPIModel DVD-106S 012, ATAPI CD/DVD-ROM drive
[17179580.860000] ide1 at 0x170-0x177,0x376 on irq 15
[17179580.876000] hda: max request size: 128KiB
[17179580.900000] hda: 78165360 sectors (40020 MB) w/2048KiB Cache, CHS=65535/16/63, UDMA(100)
[17179580.900000] hda: cache flushes not supported
[17179580.900000] hda: hda1 hda2 hda3 hda4 < hda5 hda6 >
[17179580.968000] hdc: ATAPI 40X CD-ROM CD-R/RW drive, 8192kB Cache, UDMA(33)
[17179580.968000] Uniform CD-ROM driver Revision: 3.20
[17179580.972000] hdd: ATAPI 40X DVD-ROM drive, 256kB Cache, UDMA(66)
[17179581.624000] usbcore: registered new driver usbfs
[17179581.624000] usbcore: registered new driver hub
[17179581.632000] USB Universal Host Controller Interface driver v2.3
[17179581.632000] ACPI: PCI Interrupt 0000:00:1f.2[D] -> GSI 19 (level, low) -> IRQ 177
[17179581.632000] PCI: Setting latency timer of device 0000:00:1f.2 to 64
[17179581.632000] uhci_hcd 0000:00:1f.2: UHCI Host Controller
[17179581.632000] uhci_hcd 0000:00:1f.2: new USB bus registered, assigned bus number 1
[17179581.632000] uhci_hcd 0000:00:1f.2: irq 177, io base 0x0000dd00
[17179581.632000] hub 1-0:1.0: USB hub found
[17179581.632000] hub 1-0:1.0: 2 ports detected
[17179581.736000] ACPI: PCI Interrupt 0000:00:1f.4[C] -> GSI 23 (level, low) -> IRQ 185
[17179581.736000] PCI: Setting latency timer of device 0000:00:1f.4 to 64
[17179581.736000] uhci_hcd 0000:00:1f.4: UHCI Host Controller
[17179581.736000] uhci_hcd 0000:00:1f.4: new USB bus registered, assigned bus number 2
[17179581.736000] uhci_hcd 0000:00:1f.4: irq 185, io base 0x0000dd80
[17179581.736000] hub 2-0:1.0: USB hub found
[17179581.736000] hub 2-0:1.0: 2 ports detected
[17179581.976000] usb 1-2: new full speed USB device using uhci_hcd and address 2
[17179582.048000] Attempting manual resume
[17179582.096000] EXT3-fs: mounted filesystem with ordered data mode.
[17179582.096000] kjournald starting. Commit interval 5 seconds
[17179582.120000] hub 1-2:1.0: USB hub found
[17179582.120000] hub 1-2:1.0: 2 ports detected
[17179582.432000] usb 1-2.1: new full speed USB device using uhci_hcd and address 3
[17179582.744000] usb 1-2.2: new low speed USB device using uhci_hcd and address 4
[17179598.212000] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[17179598.220000] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[17179598.240000] Linux agpgart interface v0.101 (c) Dave Jones
[17179598.288000] hw_random: RNG not detected
[17179598.300000] agpgart: Detected an Intel i810 E Chipset.
[17179598.312000] agpgart: AGP aperture is 64M @ 0xe8000000
[17179598.648000] r8169 Gigabit Ethernet driver 2.2LK loaded
[17179598.648000] ACPI: PCI Interrupt 0000:01:05.0[A] -> GSI 21 (level, low) -> IRQ 193
[17179598.652000] eth0: Identified chip type is 'RTL8169s/8110s'.
[17179598.652000] eth0: RTL8169 at 0xd0860f00, 00:13:46:2d:77:da, IRQ 193
[17179598.740000] i810_smbus 0000:00:01.0: i810/i815 i2c device found.
[17179599.632000] Real Time Clock Driver v1.12
[17179599.672000] parport: PnPBIOS parport detected.
[17179599.672000] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,ECP,DMA]
[17179599.756000] usbcore: registered new driver hiddev
[17179599.760000] input: BTC USB Keyboard as /class/input/input1
[17179599.760000] input: USB HID v1.00 Keyboard [BTC USB Keyboard] on usb-0000:00:1f.2-2.1
[17179599.772000] input: BTC USB Keyboard as /class/input/input2
[17179599.772000] input,hiddev96: USB HID v1.00 Device [BTC USB Keyboard] on usb-0000:00:1f.2-2.1
[17179599.772000] input: PC Speaker as /class/input/input3
[17179599.788000] input: Logitech USB-PS/2 Optical Mouse as /class/input/input4
[17179599.788000] input: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:1f.2-2.2
[17179599.788000] usbcore: registered new driver usbhid
[17179599.788000] drivers/usb/input/hid-core.c: v2.6:USB HID core driver
[17179600.200000] Floppy drive(s): fd0 is 1.44M
[17179600.216000] FDC 0 is a post-1991 82077
[17179600.404000] ACPI: PCI Interrupt 0000:00:1f.5[b] -> GSI 17 (level, low) -> IRQ 169
[17179600.404000] PCI: Setting latency timer of device 0000:00:1f.5 to 64
[17179600.972000] intel8x0_measure_ac97_clock: measured 55298 usecs
[17179600.972000] intel8x0: clocking to 48000
[17179601.328000] ts: Compaq touchscreen protocol output
[17179601.472000] r8169: eth0: link up
[17179602.572000] NET: Registered protocol family 17
[17179602.700000] Intel ISA PCIC probe: not found.
[17179602.892000] lp0: using parport0 (interrupt-driven).
[17179603.044000] Adding 497972k swap on /dev/hda5. Priority:-1 extents:1 across:497972k
[17179603.180000] EXT3 FS on hda3, internal journal
[17179603.448000] md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
[17179603.448000] md: bitmap version 4.39
[17179604.236000] device-mapper: 4.4.0-ioctl (2005-01-12) initialised: dm-devel@redhat.com
[17179605.256000] cdrom: open failed.
[17179605.788000] cdrom: open failed.
[17179605.792000] cdrom: open failed.
[17179606.952000] kjournald starting. Commit interval 5 seconds
[17179606.952000] EXT3 FS on hda6, internal journal
[17179606.952000] EXT3-fs: mounted filesystem with ordered data mode.
[17179607.008000] NTFS driver 2.1.25 [Flags: R/O MODULE].
[17179607.108000] NTFS volume version 3.1.
[17179608.724000] ACPI: Power Button (FF) [PWRF]
[17179608.724000] ACPI: Power Button (CM) [PWRB]
[17179608.724000] ACPI: Sleep Button (CM) [SLPB]
[17179608.916000] ibm_acpi: ec object not found
[17179608.968000] pcc_acpi: loading...
[17179617.952000] ppdev: user-space parallel port driver
[17179621.176000] apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
[17179621.176000] apm: overridden by ACPI.
[17179623.156000] Bluetooth: Core ver 2.8
[17179623.156000] NET: Registered protocol family 31
[17179623.156000] Bluetooth: HCI device and connection manager initialized
[17179623.156000] Bluetooth: HCI socket layer initialized
[17179623.208000] Bluetooth: L2CAP ver 2.8
[17179623.208000] Bluetooth: L2CAP socket layer initialized
[17179623.248000] Bluetooth: RFCOMM socket layer initialized
[17179623.248000] Bluetooth: RFCOMM TTY layer initialized
[17179623.248000] Bluetooth: RFCOMM ver 1.7
[17179629.444000] NET: Registered protocol family 10
[17179629.444000] lo: Disabled Privacy Extensions
[17179629.444000] IPv6 over IPv4 tunneling driver
[17179639.664000] eth0: no IPv6 routers present
[17180109.352000] r8169: eth0: link down
[17180113.336000] r8169: eth0: link up
[17180115.344000] r8169: eth0: link down
[17180117.172000] r8169: eth0: link up
[17180335.200000] r8169: eth0: link down
[17180345.024000] r8169: eth0: link up
[17180347.092000] r8169: eth0: link down
[17180348.828000] r8169: eth0: link up
[17180464.044000] r8169: eth0: link down
[17180473.804000] r8169: eth0: link up
[17180475.868000] r8169: eth0: link down
[17180477.496000] r8169: eth0: link up
remi@perso:~$et voici le fichier /var/log/Xorg.0.log :
X Window System Version 7.0.0
Release Date: 21 December 2005
X Protocol Version 11, Revision 0, Release 7.0
Build Operating System:Linux 2.6.15.7 i686
Current Operating System: Linux perso 2.6.15-26-386 #1 PREEMPT Thu Aug 3 02:52:00 UTC 2006 i686
Build Date: 16 March 2006
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Module Loader present
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Thu Aug 31 18:41:09 2006
(==) Using config file: "/etc/X11/xorg.conf"
(==) ServerLayout "Default Layout"
(**) |-->Screen "Default Screen" (0)
(**) | |-->Monitor "NEC V921"
(**) | |-->Device "Intel Corporation 82810E DC-133 CGC [Chipset Graphics Controller]"
(**) |-->Input Device "Generic Keyboard"
(**) |-->Input Device "Configured Mouse"
(**) |-->Input Device "stylus"
(**) |-->Input Device "cursor"
(**) |-->Input Device "eraser"
(WW) The directory "/usr/share/X11/fonts/cyrillic" does not exist.
Entry deleted from font path.
(**) FontPath set to "/usr/share/X11/fonts/misc,/usr/share/X11/fonts/100dpi/:unscaled,/usr/share/X11/fonts/75dpi/:unscaled,/usr/share/X11/fonts/Type1,/usr/share/X11/fonts/100dpi,/usr/share/X11/fonts/75dpi,/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
(==) RgbPath set to "/etc/X11/rgb"
(==) ModulePath set to "/usr/lib/xorg/modules"
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.2
X.Org Video Driver: 0.8
X.Org XInput driver : 0.5
X.Org Server Extension : 0.2
X.Org Font Renderer : 0.4
(II) Loader running on linux
(II) LoadModule: "bitmap"
(II) Loading /usr/lib/xorg/modules/fonts/libbitmap.so
(II) Module bitmap: vendor="X.Org Foundation"
compiled for 7.0.0, module version = 1.0.0
Module class: X.Org Font Renderer
ABI class: X.Org Font Renderer, version 0.4
(II) Loading font Bitmap
(II) LoadModule: "pcidata"
(II) Loading /usr/lib/xorg/modules/libpcidata.so
(II) Module pcidata: vendor="X.Org Foundation"
compiled for 7.0.0, module version = 1.0.0
ABI class: X.Org Video Driver, version 0.8
(++) using VT number 7
(II) PCI: PCI scan (all values are in hex)
(II) PCI: 00:00:0: chip 8086,7124 card 1631,7124 rev 03 class 06,00,00 hdr 00
(II) PCI: 00:01:0: chip 8086,7125 card 1631,1003 rev 03 class 03,00,00 hdr 00
(II) PCI: 00:1e:0: chip 8086,244e card 0000,0000 rev 05 class 06,04,00 hdr 01
(II) PCI: 00:1f:0: chip 8086,2440 card 0000,0000 rev 05 class 06,01,00 hdr 80
(II) PCI: 00:1f:1: chip 8086,244b card 1631,244b rev 05 class 01,01,80 hdr 00
(II) PCI: 00:1f:2: chip 8086,2442 card 1631,244b rev 05 class 0c,03,00 hdr 00
(II) PCI: 00:1f:3: chip 8086,2443 card 1631,244b rev 05 class 0c,05,00 hdr 00
(II) PCI: 00:1f:4: chip 8086,2444 card 1631,244b rev 05 class 0c,03,00 hdr 00
(II) PCI: 00:1f:5: chip 8086,2445 card 1631,2002 rev 05 class 04,01,00 hdr 00
(II) PCI: 00:1f:6: chip 8086,2446 card 1631,3003 rev 05 class 07,03,00 hdr 00
(II) PCI: 01:05:0: chip 1186,4300 card 1186,4300 rev 10 class 02,00,00 hdr 00
(II) PCI: End of PCI scan
(II) Intel Bridge workaround enabled
(II) Host-to-PCI bridge:
(II) Bus 0: bridge is at (0:0:0), (0,0,1), BCTRL: 0x0008 (VGA_EN is set)
(II) Bus 0 I/O range:
[0] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[b]
(II) Bus 0 non-prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[b]
(II) Bus 0 prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[b]
(II) Subtractive PCI-to-PCI bridge:
(II) Bus 1: bridge is at (0:30:0), (0,1,1), BCTRL: 0x0003 (VGA_EN is cleared)
(II) Bus 1 I/O range:
[0] -1 0 0x0000c000 - 0x0000cfff (0x1000) IX[b]
(II) Bus 1 non-prefetchable memory range:
[0] -1 0 0xefd00000 - 0xefdfffff (0x100000) MX[b]
(II) Bus 1 prefetchable memory range:
[0] -1 0 0xe7b00000 - 0xe7bfffff (0x100000) MX[b]
(II) PCI-to-ISA bridge:
(II) Bus -1: bridge is at (0:31:0), (0,-1,-1), BCTRL: 0x0008 (VGA_EN is set)
(--) PCI:*(0:1:0) Intel Corporation 82810E DC-133 CGC [Chipset Graphics Controller] rev 3, Mem @ 0xe8000000/26, 0xeff80000/19
(II) Addressable bus resource ranges are
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[b]
[1] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[b]
(II) OS-reported resource ranges:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[5] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
(II) Active PCI resource ranges:
[0] -1 0 0xefdfff00 - 0xefdfffff (0x100) MX[b]
[1] -1 0 0xeff80000 - 0xefffffff (0x80000) MX[b](B)
[2] -1 0 0xe8000000 - 0xebffffff (0x4000000) MX[b](B)
[3] -1 0 0x0000cc00 - 0x0000ccff (0x100) IX[b]
[4] -1 0 0x0000dc00 - 0x0000dc7f (0x80) IX[b]
[5] -1 0 0x0000de00 - 0x0000deff (0x100) IX[b]
[6] -1 0 0x0000d880 - 0x0000d8bf (0x40) IX[b]
[7] -1 0 0x0000da00 - 0x0000daff (0x100) IX[b]
[8] -1 0 0x0000dd80 - 0x0000dd9f (0x20) IX[b]
[9] -1 0 0x00000540 - 0x0000054f (0x10) IX[b]
[10] -1 0 0x0000dd00 - 0x0000dd1f (0x20) IX[b]
[11] -1 0 0x0000fc00 - 0x0000fc0f (0x10) IX[b]
(II) Active PCI resource ranges after removing overlaps:
[0] -1 0 0xefdfff00 - 0xefdfffff (0x100) MX[b]
[1] -1 0 0xeff80000 - 0xefffffff (0x80000) MX[b](B)
[2] -1 0 0xe8000000 - 0xebffffff (0x4000000) MX[b](B)
[3] -1 0 0x0000cc00 - 0x0000ccff (0x100) IX[b]
[4] -1 0 0x0000dc00 - 0x0000dc7f (0x80) IX[b]
[5] -1 0 0x0000de00 - 0x0000deff (0x100) IX[b]
[6] -1 0 0x0000d880 - 0x0000d8bf (0x40) IX[b]
[7] -1 0 0x0000da00 - 0x0000daff (0x100) IX[b]
[8] -1 0 0x0000dd80 - 0x0000dd9f (0x20) IX[b]
[9] -1 0 0x00000540 - 0x0000054f (0x10) IX[b]
[10] -1 0 0x0000dd00 - 0x0000dd1f (0x20) IX[b]
[11] -1 0 0x0000fc00 - 0x0000fc0f (0x10) IX[b]
(II) OS-reported resource ranges after removing overlaps with PCI:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[5] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
(II) All system resource ranges:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0xefdfff00 - 0xefdfffff (0x100) MX[b]
[5] -1 0 0xeff80000 - 0xefffffff (0x80000) MX[b](B)
[6] -1 0 0xe8000000 - 0xebffffff (0x4000000) MX[b](B)
[7] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[8] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
[9] -1 0 0x0000cc00 - 0x0000ccff (0x100) IX[b]
[10] -1 0 0x0000dc00 - 0x0000dc7f (0x80) IX[b]
[11] -1 0 0x0000de00 - 0x0000deff (0x100) IX[b]
[12] -1 0 0x0000d880 - 0x0000d8bf (0x40) IX[b]
[13] -1 0 0x0000da00 - 0x0000daff (0x100) IX[b]
[14] -1 0 0x0000dd80 - 0x0000dd9f (0x20) IX[b]
[15] -1 0 0x00000540 - 0x0000054f (0x10) IX[b]
[16] -1 0 0x0000dd00 - 0x0000dd1f (0x20) IX[b]
[17] -1 0 0x0000fc00 - 0x0000fc0f (0x10) IX[b]
(II) LoadModule: "bitmap"
(II) Reloading /usr/lib/xorg/modules/fonts/libbitmap.so
(II) Loading font Bitmap
(II) LoadModule: "ddc"
(II) Loading /usr/lib/xorg/modules/libddc.so
(II) Module ddc: vendor="X.Org Foundation"
compiled for 7.0.0, module version = 1.0.0
ABI class: X.Org Video Driver, version 0.8
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions/libdri.so
(II) Module dri: vendor="X.Org Foundation"
compiled for 7.0.0, module version = 1.0.0
ABI class: X.Org Server Extension, version 0.2
(II) Loading sub module "drm"
(II) LoadModule: "drm"
(II) Loading /usr/lib/xorg/modules/linux/libdrm.so
(II) Module drm: vendor="X.Org Foundation"
compiled for 7.0.0, module version = 1.0.0
ABI class: X.Org Server Extension, version 0.2
(II) Loading extension XFree86-DRI
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
compiled for 7.0.0, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 0.2
(II) Loading extension SHAPE
(II) Loading extension MIT-SUNDRY-NONSTANDARD
(II) Loading extension BIG-REQUESTS
(II) Loading extension SYNC
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XC-MISC
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-Misc
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension TOG-CUP
(II) Loading extension Extended-Visual-Information
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "freetype"
(II) Loading /usr/lib/xorg/modules/fonts/libfreetype.so
(II) Module freetype: vendor="X.Org Foundation & the After X-TT Project"
compiled for 7.0.0, module version = 2.1.0
Module class: X.Org Font Renderer
ABI class: X.Org Font Renderer, version 0.4
(II) Loading font FreeType
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions/libglx.so
(II) Module glx: vendor="X.Org Foundation"
compiled for 7.0.0, module version = 1.0.0
ABI class: X.Org Server Extension, version 0.2
(II) Loading sub module "GLcore"
(II) LoadModule: "GLcore"
(II) Loading /usr/lib/xorg/modules/extensions/libGLcore.so
(II) Module GLcore: vendor="X.Org Foundation"
compiled for 7.0.0, module version = 1.0.0
ABI class: X.Org Server Extension, version 0.2
(II) Loading extension GLX
(II) LoadModule: "int10"
(II) Loading /usr/lib/xorg/modules/libint10.so
(II) Module int10: vendor="X.Org Foundation"
compiled for 7.0.0, module version = 1.0.0
ABI class: X.Org Video Driver, version 0.8
(II) LoadModule: "type1"
(II) Loading /usr/lib/xorg/modules/fonts/libtype1.so
(II) Module type1: vendor="X.Org Foundation"
compiled for 7.0.0, module version = 1.0.2
Module class: X.Org Font Renderer
ABI class: X.Org Font Renderer, version 0.4
(II) Loading font Type1
(II) LoadModule: "vbe"
(II) Loading /usr/lib/xorg/modules/libvbe.so
(II) Module vbe: vendor="X.Org Foundation"
compiled for 7.0.0, module version = 1.1.0
ABI class: X.Org Video Driver, version 0.8
(II) LoadModule: "i810"
(II) Loading /usr/lib/xorg/modules/drivers/i810_drv.so
(II) Module i810: vendor="X.Org Foundation"
compiled for 7.0.0, module version = 1.4.1
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 0.8
(II) LoadModule: "kbd"
(II) Loading /usr/lib/xorg/modules/input/kbd_drv.so
(II) Module kbd: vendor="X.Org Foundation"
compiled for 7.0.0, module version = 1.0.1
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 0.5
(II) LoadModule: "mouse"
(II) Loading /usr/lib/xorg/modules/input/mouse_drv.so
(II) Module mouse: vendor="X.Org Foundation"
compiled for 7.0.0, module version = 1.0.3
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 0.5
(II) LoadModule: "wacom"
(II) Loading /usr/lib/xorg/modules/input/wacom_drv.so
(II) Module wacom: vendor="X.Org Foundation"
compiled for 4.3.99.902, module version = 1.0.0
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 0.5
(II) Wacom driver level: 47-0.7.2 $
(II) I810: Driver for Intel Integrated Graphics Chipsets: i810, i810-dc100,
i810e, i815, i830M, 845G, 852GM/855GM, 865G, 915G, E7221 (i915),
915GM, 945G, 945GM
(II) Primary Device is: PCI 00:01:0
(--) Chipset i810e found
(II) resource ranges after xf86ClaimFixedResources() call:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0xefdfff00 - 0xefdfffff (0x100) MX[b]
[5] -1 0 0xeff80000 - 0xefffffff (0x80000) MX[b](B)
[6] -1 0 0xe8000000 - 0xebffffff (0x4000000) MX[b](B)
[7] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[8] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
[9] -1 0 0x0000cc00 - 0x0000ccff (0x100) IX[b]
[10] -1 0 0x0000dc00 - 0x0000dc7f (0x80) IX[b]
[11] -1 0 0x0000de00 - 0x0000deff (0x100) IX[b]
[12] -1 0 0x0000d880 - 0x0000d8bf (0x40) IX[b]
[13] -1 0 0x0000da00 - 0x0000daff (0x100) IX[b]
[14] -1 0 0x0000dd80 - 0x0000dd9f (0x20) IX[b]
[15] -1 0 0x00000540 - 0x0000054f (0x10) IX[b]
[16] -1 0 0x0000dd00 - 0x0000dd1f (0x20) IX[b]
[17] -1 0 0x0000fc00 - 0x0000fc0f (0x10) IX[b]
(II) resource ranges after probing:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0xefdfff00 - 0xefdfffff (0x100) MX[b]
[5] -1 0 0xeff80000 - 0xefffffff (0x80000) MX[b](B)
[6] -1 0 0xe8000000 - 0xebffffff (0x4000000) MX[b](B)
[7] 0 0 0x000a0000 - 0x000affff (0x10000) MS[b]
[8] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[b]
[9] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[b]
[10] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[11] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
[12] -1 0 0x0000cc00 - 0x0000ccff (0x100) IX[b]
[13] -1 0 0x0000dc00 - 0x0000dc7f (0x80) IX[b]
[14] -1 0 0x0000de00 - 0x0000deff (0x100) IX[b]
[15] -1 0 0x0000d880 - 0x0000d8bf (0x40) IX[b]
[16] -1 0 0x0000da00 - 0x0000daff (0x100) IX[b]
[17] -1 0 0x0000dd80 - 0x0000dd9f (0x20) IX[b]
[18] -1 0 0x00000540 - 0x0000054f (0x10) IX[b]
[19] -1 0 0x0000dd00 - 0x0000dd1f (0x20) IX[b]
[20] -1 0 0x0000fc00 - 0x0000fc0f (0x10) IX[b]
[21] 0 0 0x000003b0 - 0x000003bb (0xc) IS[b]
[22] 0 0 0x000003c0 - 0x000003df (0x20) IS[b]
(II) Setting vga for screen 0.
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/lib/xorg/modules/libvgahw.so
(II) Module vgahw: vendor="X.Org Foundation"
compiled for 7.0.0, module version = 0.1.0
ABI class: X.Org Video Driver, version 0.8
(**) I810(0): Depth 24, (--) framebuffer bpp 24
(==) I810(0): RGB weight 888
(==) I810(0): Default visual is TrueColor
(II) Loading sub module "xaa"
(II) LoadModule: "xaa"
(II) Loading /usr/lib/xorg/modules/libxaa.so
(II) Module xaa: vendor="X.Org Foundation"
compiled for 7.0.0, module version = 1.2.0
ABI class: X.Org Video Driver, version 0.8
(**) I810(0): DRI is disabled because it runs only at 16-bit depth.
(II) Loading sub module "vbe"
(II) LoadModule: "vbe"
(II) Reloading /usr/lib/xorg/modules/libvbe.so
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Reloading /usr/lib/xorg/modules/libint10.so
(II) I810(0): initializing int10
(II) I810(0): Primary V_BIOS segment is: 0xc000
(II) I810(0): VESA BIOS detected
(II) I810(0): VESA VBE Version 3.0
(II) I810(0): VESA VBE Total Mem: 1024 kB
(II) I810(0): VESA VBE OEM: Intel(R) 8xx Chipset Video BIOS
(II) I810(0): VESA VBE OEM Software Rev: 35.17
(II) I810(0): VESA VBE OEM Vendor: Intel Corporation
(II) I810(0): VESA VBE OEM Product: Intel(R) 8xx Chipset
(II) I810(0): VESA VBE OEM Product Rev: Hardware Version 0.0
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Reloading /usr/lib/xorg/modules/libddc.so
(II) I810(0): VESA VBE DDC supported
(II) I810(0): VESA VBE DDC Level 2
(II) I810(0): VESA VBE DDC transfer in appr. 1 sec.
(II) I810(0): VESA VBE DDC read successfully
(II) I810(0): Manufacturer: NEC Model: 5dc2 Serial#: 16843009
(II) I810(0): Year: 2001 Week: 26
(II) I810(0): EDID Version: 1.3
(II) I810(0): Analog Display Input, Input Voltage Level: 0.700/0.300 V
(II) I810(0): Sync: Separate Composite
(II) I810(0): Max H-Image Size [cm]: horiz.: 37 vert.: 27
(II) I810(0): Gamma: 2.20
(II) I810(0): DPMS capabilities: StandBy Suspend Off; RGB/Color Display
(II) I810(0): First detailed timing is preferred mode
(II) I810(0): redX: 0.629 redY: 0.330 greenX: 0.281 greenY: 0.600
(II) I810(0): blueX: 0.148 blueY: 0.068 whiteX: 0.283 whiteY: 0.297
(II) I810(0): Supported VESA Video Modes:
(II) I810(0): 720x400@70Hz
(II) I810(0): 720x400@88Hz
(II) I810(0): 640x480@60Hz
(II) I810(0): 640x480@67Hz
(II) I810(0): 640x480@72Hz
(II) I810(0): 640x480@75Hz
(II) I810(0): 800x600@56Hz
(II) I810(0): 800x600@60Hz
(II) I810(0): 800x600@72Hz
(II) I810(0): 800x600@75Hz
(II) I810(0): 832x624@75Hz
(II) I810(0): 1024x768@87Hz (interlaced)
(II) I810(0): 1024x768@60Hz
(II) I810(0): 1024x768@70Hz
(II) I810(0): 1024x768@75Hz
(II) I810(0): 1280x1024@75Hz
(II) I810(0): 1152x870@75Hz
(II) I810(0): Manufacturer's mask: 0
(II) I810(0): Supported Future Video Modes:
(II) I810(0): #0: hsize: 640 vsize 480 refresh: 85 vid: 22833
(II) I810(0): #1: hsize: 800 vsize 600 refresh: 85 vid: 22853
(II) I810(0): #2: hsize: 1024 vsize 768 refresh: 85 vid: 22881
(II) I810(0): #3: hsize: 1152 vsize 864 refresh: 75 vid: 20337
(II) I810(0): #4: hsize: 1280 vsize 960 refresh: 85 vid: 22913
(II) I810(0): #5: hsize: 1280 vsize 1024 refresh: 85 vid: 39297
(II) I810(0): #6: hsize: 1600 vsize 1200 refresh: 75 vid: 20393
(II) I810(0): #7: hsize: 1920 vsize 1440 refresh: 60 vid: 16593
(II) I810(0): Supported additional Video Mode:
(II) I810(0): clock: 157.5 MHz Image Size: 356 x 267 mm
(II) I810(0): h_active: 1280 h_sync: 1344 h_sync_end 1504 h_blank_end 1728 h_border: 0
(II) I810(0): v_active: 1024 v_sync: 1025 v_sync_end 1028 v_blanking: 1072 v_border: 0
(II) I810(0): Ranges: V min: 55 V max: 160 Hz, H min: 31 H max: 96 kHz, PixClock max 240 MHz
(II) I810(0): Monitor name: NEC V921
(II) I810(0): Serial No: 1600680TB
(--) I810(0): Chipset: "i810e"
(--) I810(0): Linear framebuffer at 0xE8000000
(--) I810(0): IO registers at addr 0xEFF80000
(II) I810(0): Kernel reported 51712 total, 1 used
(II) I810(0): I810CheckAvailableMemory: 206844k available
(**) I810(0): Will alloc AGP framebuffer: 16000 kByte
(==) I810(0): Using gamma correction (1.0, 1.0, 1.0)
(II) I810(0): NEC V921: Using hsync range of 31.00-96.00 kHz
(II) I810(0): NEC V921: Using vrefresh range of 55.00-160.00 Hz
(II) I810(0): Clock range: 9.50 to 136.00 MHz
(II) I810(0): Not using default mode "320x175" (bad mode clock/interlace/doublescan)
(II) I810(0): Not using default mode "320x200" (bad mode clock/interlace/doublescan)
(II) I810(0): Not using default mode "360x200" (bad mode clock/interlace/doublescan)
(II) I810(0): Not using default mode "320x240" (bad mode clock/interlace/doublescan)
(II) I810(0): Not using default mode "320x240" (bad mode clock/interlace/doublescan)
(II) I810(0): Not using default mode "320x240" (bad mode clock/interlace/doublescan)
(II) I810(0): Not using default mode "320x240" (bad mode clock/interlace/doublescan)
(II) I810(0): Not using default mode "400x300" (bad mode clock/interlace/doublescan)
(II) I810(0): Not using default mode "400x300" (bad mode clock/interlace/doublescan)
(II) I810(0): Not using default mode "400x300" (bad mode clock/interlace/doublescan)
(II) I810(0): Not using default mode "400x300" (bad mode clock/interlace/doublescan)
(II) I810(0): Not using default mode "400x300" (bad mode clock/interlace/doublescan)
(II) I810(0): Not using default mode "1024x768" (unknown reason)
(II) I810(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan)
(II) I810(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan)
(II) I810(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan)
(II) I810(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan)
(II) I810(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan)
(II) I810(0): Not using default mode "576x432" (bad mode clock/interlace/doublescan)
(II) I810(0): Not using default mode "640x480" (bad mode clock/interlace/doublescan)
(II) I810(0): Not using default mode "1280x960" (bad mode clock/interlace/doublescan)
(II) I810(0): Not using default mode "640x480" (bad mode clock/interlace/doublescan)
(II) I810(0): Not using default mode "640x512" (bad mode clock/interlace/doublescan)
(II) I810(0): Not using default mode "640x512" (bad mode clock/interlace/doublescan)
(II) I810(0): Not using default mode "1280x1024" (bad mode clock/interlace/doublescan)
(II) I810(0): Not using default mode "640x512" (bad mode clock/interlace/doublescan)
(II) I810(0): Not using default mode "1600x1200" (bad mode clock/interlace/doublescan)
(II) I810(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan)
(II) I810(0): Not using default mode "1600x1200" (bad mode clock/interlace/doublescan)
(II) I810(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan)
(II) I810(0): Not using default mode "1600x1200" (bad mode clock/interlace/doublescan)
(II) I810(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan)
(II) I810(0): Not using default mode "1600x1200" (bad mode clock/interlace/doublescan)
(II) I810(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan)
(II) I810(0): Not using default mode "1600x1200" (bad mode clock/interlace/doublescan)
(II) I810(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan)
(II) I810(0): Not using default mode "1792x1344" (bad mode clock/interlace/doublescan)
(II) I810(0): Not using default mode "896x672" (bad mode clock/interlace/doublescan)
(II) I810(0): Not using default mode "1792x1344" (bad mode clock/interlace/doublescan)
(II) I810(0): Not using default mode "896x672" (bad mode clock/interlace/doublescan)
(II) I810(0): Not using default mode "1856x1392" (bad mode clock/interlace/doublescan)
(II) I810(0): Not using default mode "928x696" (bad mode clock/interlace/doublescan)
(II) I810(0): Not using default mode "1856x1392" (bad mode clock/interlace/doublescan)
(II) I810(0): Not using default mode "928x696" (bad mode clock/interlace/doublescan)
(II) I810(0): Not using default mode "1920x1440" (bad mode clock/interlace/doublescan)
(II) I810(0): Not using default mode "960x720" (bad mode clock/interlace/doublescan)
(II) I810(0): Not using default mode "1920x1440" (bad mode clock/interlace/doublescan)
(II) I810(0): Not using default mode "960x720" (bad mode clock/interlace/doublescan)
(II) I810(0): Not using default mode "416x312" (bad mode clock/interlace/doublescan)
(II) I810(0): Not using default mode "640x384" (bad mode clock/interlace/doublescan)
(II) I810(0): Not using default mode "640x400" (bad mode clock/interlace/doublescan)
(II) I810(0): Not using default mode "576x384" (bad mode clock/interlace/doublescan)
(II) I810(0): Not using default mode "576x432" (bad mode clock/interlace/doublescan)
(II) I810(0): Not using default mode "700x525" (bad mode clock/interlace/doublescan)
(II) I810(0): Not using default mode "1400x1050" (bad mode clock/interlace/doublescan)
(II) I810(0): Not using default mode "700x525" (bad mode clock/interlace/doublescan)
(II) I810(0): Not using default mode "1400x1050" (bad mode clock/interlace/doublescan)
(II) I810(0): Not using default mode "700x525" (bad mode clock/interlace/doublescan)
(II) I810(0): Not using default mode "1400x1050" (bad mode clock/interlace/doublescan)
(II) I810(0): Not using default mode "700x525" (bad mode clock/interlace/doublescan)
(II) I810(0): Not using default mode "720x450" (bad mode clock/interlace/doublescan)
(II) I810(0): Not using default mode "800x512" (bad mode clock/interlace/doublescan)
(II) I810(0): Not using default mode "1680x1050" (bad mode clock/interlace/doublescan)
(II) I810(0): Not using default mode "840x525" (bad mode clock/interlace/doublescan)
(II) I810(0): Not using default mode "1680x1050" (bad mode clock/interlace/doublescan)
(II) I810(0): Not using default mode "840x525" (bad mode clock/interlace/doublescan)
(II) I810(0): Not using default mode "1680x1050" (bad mode clock/interlace/doublescan)
(II) I810(0): Not using default mode "840x525" (bad mode clock/interlace/doublescan)
(II) I810(0): Not using default mode "1920x1200" (bad mode clock/interlace/doublescan)
(II) I810(0): Not using default mode "960x600" (bad mode clock/interlace/doublescan)
(II) I810(0): Not using default mode "1920x1200" (bad mode clock/interlace/doublescan)
(II) I810(0): Not using default mode "960x600" (bad mode clock/interlace/doublescan)
(II) I810(0): Not using default mode "1920x1440" (bad mode clock/interlace/doublescan)
(II) I810(0): Not using default mode "960x720" (bad mode clock/interlace/doublescan)
(II) I810(0): Not using default mode "2048x1536" (bad mode clock/interlace/doublescan)
(II) I810(0): Not using default mode "1024x768" (bad mode clock/interlace/doublescan)
(II) I810(0): Not using default mode "2048x1536" (bad mode clock/interlace/doublescan)
(II) I810(0): Not using default mode "1024x768" (bad mode clock/interlace/doublescan)
(II) I810(0): Not using default mode "2048x1536" (bad mode clock/interlace/doublescan)
(II) I810(0): Not using default mode "1024x768" (bad mode clock/interlace/doublescan)
(II) I810(0): Not using mode "1600x1200" (no mode of this name)
(II) I810(0): Not using default mode "1400x1050" (width too large for virtual size)
(II) I810(0): Not using default mode "1440x900" (width too large for virtual size)
(--) I810(0): Virtual size is 1280x1024 (pitch 2048)
(**) I810(0): *Default mode "1280x1024": 135.0 MHz, 80.0 kHz, 75.0 Hz
(II) I810(0): Modeline "1280x1024" 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync
(**) I810(0): *Default mode "1280x960": 108.0 MHz, 60.0 kHz, 60.0 Hz
(II) I810(0): Modeline "1280x960" 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync
(**) I810(0): *Default mode "1152x864": 121.5 MHz, 77.5 kHz, 85.1 Hz
(II) I810(0): Modeline "1152x864" 121.50 1152 1216 1344 1568 864 865 868 911 +hsync -vsync
(**) I810(0): *Default mode "1024x768": 94.5 MHz, 68.7 kHz, 85.0 Hz
(II) I810(0): Modeline "1024x768" 94.50 1024 1072 1168 1376 768 769 772 808 +hsync +vsync
(**) I810(0): *Default mode "800x600": 56.3 MHz, 53.7 kHz, 85.1 Hz
(II) I810(0): Modeline "800x600" 56.30 800 832 896 1048 600 601 604 631 +hsync +vsync
(**) I810(0): *Default mode "640x480": 36.0 MHz, 43.3 kHz, 85.0 Hz
(II) I810(0): Modeline "640x480" 36.00 640 696 752 832 480 481 484 509 -hsync -vsync
(**) I810(0): Default mode "1280x1024": 108.0 MHz, 64.0 kHz, 60.0 Hz
(II) I810(0): Modeline "1280x1024" 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync
(**) I810(0): Default mode "1280x800": 83.5 MHz, 49.7 kHz, 60.0 Hz
(II) I810(0): Modeline "1280x800" 83.46 1280 1344 1480 1680 800 801 804 828
(**) I810(0): Default mode "1152x864": 108.0 MHz, 67.5 kHz, 75.0 Hz
(II) I810(0): Modeline "1152x864" 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync
(**) I810(0): Default mode "1280x768": 80.1 MHz, 47.7 kHz, 60.0 Hz
(II) I810(0): Modeline "1280x768" 80.14 1280 1344 1480 1680 768 769 772 795
(**) I810(0): Default mode "1152x768": 65.0 MHz, 44.2 kHz, 54.8 Hz
(II) I810(0): Modeline "1152x768" 65.00 1152 1178 1314 1472 768 771 777 806 +hsync +vsync
(**) I810(0): Default mode "1024x768": 78.8 MHz, 60.1 kHz, 75.1 Hz
(II) I810(0): Modeline "1024x768" 78.80 1024 1040 1136 1312 768 769 772 800 +hsync +vsync
(**) I810(0): Default mode "1024x768": 75.0 MHz, 56.5 kHz, 70.1 Hz
(II) I810(0): Modeline "1024x768" 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync
(**) I810(0): Default mode "1024x768": 65.0 MHz, 48.4 kHz, 60.0 Hz
(II) I810(0): Modeline "1024x768" 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync
(**) I810(0): Default mode "832x624": 57.3 MHz, 49.7 kHz, 74.6 Hz
(II) I810(0): Modeline "832x624" 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync
(**) I810(0): Default mode "800x600": 49.5 MHz, 46.9 kHz, 75.0 Hz
(II) I810(0): Modeline "800x600" 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync
(**) I810(0): Default mode "800x600": 50.0 MHz, 48.1 kHz, 72.2 Hz
(II) I810(0): Modeline "800x600" 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync
(**) I810(0): Default mode "800x600": 40.0 MHz, 37.9 kHz, 60.3 Hz
(II) I810(0): Modeline "800x600" 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync
(**) I810(0): Default mode "800x600": 36.0 MHz, 35.2 kHz, 56.2 Hz
(II) I810(0): Modeline "800x600" 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync
(**) I810(0): Default mode "640x480": 31.5 MHz, 37.5 kHz, 75.0 Hz
(II) I810(0): Modeline "640x480" 31.50 640 656 720 840 480 481 484 500 -hsync -vsync
(**) I810(0): Default mode "640x480": 31.5 MHz, 37.9 kHz, 72.8 Hz
(II) I810(0): Modeline "640x480" 31.50 640 664 704 832 480 489 491 520 -hsync -vsync
(**) I810(0): Default mode "640x480": 25.2 MHz, 31.5 kHz, 60.0 Hz
(II) I810(0): Modeline "640x480" 25.20 640 656 752 800 480 490 492 525 -hsync -vsync
(**) I810(0): Default mode "720x400": 35.5 MHz, 37.9 kHz, 85.0 Hz
(II) I810(0): Modeline "720x400" 35.50 720 756 828 936 400 401 404 446 -hsync +vsync
(**) I810(0): Default mode "640x400": 31.5 MHz, 37.9 kHz, 85.1 Hz
(II) I810(0): Modeline "640x400" 31.50 640 672 736 832 400 401 404 445 -hsync +vsync
(**) I810(0): Default mode "640x350": 31.5 MHz, 37.9 kHz, 85.1 Hz
(II) I810(0): Modeline "640x350" 31.50 640 672 736 832 350 382 385 445 +hsync -vsync
(--) I810(0): Display dimensions: (370, 270) mm
(--) I810(0): DPI set to (87, 96)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules/libfb.so
(II) Module fb: vendor="X.Org Foundation"
compiled for 7.0.0, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.2
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Loading /usr/lib/xorg/modules/libramdac.so
(II) Module ramdac: vendor="X.Org Foundation"
compiled for 7.0.0, module version = 0.1.0
ABI class: X.Org Video Driver, version 0.8
(II) I810(0): XvMC is Disabled: use XvMCSurfaces config option to enable.
(==) Depth 24 pixmap format is 32 bpp
(II) do I need RAC? No, I don't.
(II) resource ranges after preInit:
[0] 0 0 0xeff80000 - 0xefffffff (0x80000) MS[b]
[1] 0 0 0xe8000000 - 0xebffffff (0x4000000) MS[b]
[2] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
[3] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[4] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[5] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[6] -1 0 0xefdfff00 - 0xefdfffff (0x100) MX[b]
[7] -1 0 0xeff80000 - 0xefffffff (0x80000) MX[b](B)
[8] -1 0 0xe8000000 - 0xebffffff (0x4000000) MX[b](B)
[9] 0 0 0x000a0000 - 0x000affff (0x10000) MS[b](OprD)
[10] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[b](OprD)
[11] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[b](OprD)
[12] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[13] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
[14] -1 0 0x0000cc00 - 0x0000ccff (0x100) IX[b]
[15] -1 0 0x0000dc00 - 0x0000dc7f (0x80) IX[b]
[16] -1 0 0x0000de00 - 0x0000deff (0x100) IX[b]
[17] -1 0 0x0000d880 - 0x0000d8bf (0x40) IX[b]
[18] -1 0 0x0000da00 - 0x0000daff (0x100) IX[b]
[19] -1 0 0x0000dd80 - 0x0000dd9f (0x20) IX[b]
[20] -1 0 0x00000540 - 0x0000054f (0x10) IX[b]
[21] -1 0 0x0000dd00 - 0x0000dd1f (0x20) IX[b]
[22] -1 0 0x0000fc00 - 0x0000fc0f (0x10) IX[b]
[23] 0 0 0x000003b0 - 0x000003bb (0xc) IS[b](OprU)
[24] 0 0 0x000003c0 - 0x000003df (0x20) IS[b](OprU)
(II) I810(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000
(II) I810(0): Setting dot clock to 135.0 MHz [ 0x2b 0x6 0x20 ] [ 45 8 2 ]
(II) I810(0): chose watermark 0x4441d000: (tab.freq 135.0)
(II) I810(0): xf86BindGARTMemory: bind key 0 at 0x00000000 (pgoffset 0)
(WW) I810(0): xf86AllocateGARTMemory: allocation of 1024 pages failed
(Cannot allocate memory)
(II) I810(0): No physical memory available for 4194304 bytes of DCACHE
(II) I810(0): xf86BindGARTMemory: bind key 1 at 0x01000000 (pgoffset 4096)
(II) I810(0): Allocated of 4096 bytes for HW cursor
(II) I810(0): xf86BindGARTMemory: bind key 2 at 0x01001000 (pgoffset 4097)
(II) I810(0): Allocated of 16384 bytes for ARGB HW cursor
(II) I810(0): Adding 256 scanlines for pixmap caching
(II) I810(0): Allocated Scratch Memory
(II) I810(0): Using XFree86 Acceleration Architecture (XAA)
Screen to screen bit blits
Solid filled rectangles
8x8 mono pattern filled rectangles
Indirect CPU to Screen color expansion
Solid Horizontal and Vertical Lines
Offscreen Pixmaps
Setting up tile and stipple cache:
32 128x128 slots
12 256x256 slots
(==) I810(0): Backing store disabled
(==) I810(0): Silken mouse enabled
(**) Option "dpms"
(**) I810(0): DPMS enabled
(WW) I810(0): Direct rendering disabled
(==) RandR enabled
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-APPGROUP
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension XFree86-Bigfont
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) Initializing built-in extension XEVIE
(**) Option "CoreKeyboard"
(**) Generic Keyboard: Core Keyboard
(**) Option "Protocol" "standard"
(**) Generic Keyboard: Protocol: standard
(**) Option "AutoRepeat" "500 30"
(**) Option "XkbRules" "xorg"
(**) Generic Keyboard: XkbRules: "xorg"
(**) Option "XkbModel" "pc105"
(**) Generic Keyboard: XkbModel: "pc105"
(**) Option "XkbLayout" "fr"
(**) Generic Keyboard: XkbLayout: "fr"
(**) Option "XkbVariant" "latin9"
(**) Generic Keyboard: XkbVariant: "latin9"
(**) Option "CustomKeycodes" "off"
(**) Generic Keyboard: CustomKeycodes disabled
(**) Option "Protocol" "ExplorerPS/2"
(**) Configured Mouse: Device: "/dev/input/mice"
(**) Configured Mouse: Protocol: "ExplorerPS/2"
(**) Option "CorePointer"
(**) Configured Mouse: Core Pointer
(**) Option "Device" "/dev/input/mice"
(**) Option "Emulate3Buttons" "true"
(**) Configured Mouse: Emulate3Buttons, Emulate3Timeout: 50
(**) Option "ZAxisMapping" "4 5"
(**) Configured Mouse: ZAxisMapping: buttons 4 and 5
(**) Configured Mouse: Buttons: 9
(**) Option "SendCoreEvents"
(**) stylus: always reports core events
(**) stylus device is /dev/wacom
(**) stylus is in absolute mode
(**) stylus: forcing TabletPC ISD V4 protocol
(**) WACOM: suppress value is 2
(**) Option "BaudRate" "9600"
(**) stylus: serial speed 9600
(**) Option "SendCoreEvents"
(**) cursor: always reports core events
(**) cursor device is /dev/wacom
(**) cursor is in relative mode
(**) cursor: forcing TabletPC ISD V4 protocol
(**) WACOM: suppress value is 2
(**) Option "BaudRate" "9600"
(**) cursor: serial speed 9600
(**) Option "SendCoreEvents"
(**) eraser: always reports core events
(**) eraser device is /dev/wacom
(**) eraser is in absolute mode
(**) eraser: forcing TabletPC ISD V4 protocol
(**) WACOM: suppress value is 2
(**) Option "BaudRate" "9600"
(**) eraser: serial speed 9600
(II) XINPUT: Adding extended input device "eraser" (type: Wacom Eraser)
(II) XINPUT: Adding extended input device "cursor" (type: Wacom Cursor)
(II) XINPUT: Adding extended input device "stylus" (type: Wacom Stylus)
(II) XINPUT: Adding extended input device "Configured Mouse" (type: MOUSE)
(II) XINPUT: Adding extended input device "Generic Keyboard" (type: KEYBOARD)
(**) Option "Device" "/dev/wacom"
(EE) xf86OpenSerial: Cannot open device /dev/wacom
No such file or directory.
Error opening /dev/wacom : No such file or directory
(EE) xf86OpenSerial: Cannot open device /dev/wacom
No such file or directory.
Error opening /dev/wacom : No such file or directory
(**) Option "Device" "/dev/wacom"
(EE) xf86OpenSerial: Cannot open device /dev/wacom
No such file or directory.
Error opening /dev/wacom : No such file or directory
(EE) xf86OpenSerial: Cannot open device /dev/wacom
No such file or directory.
Error opening /dev/wacom : No such file or directory
(**) Option "Device" "/dev/wacom"
(EE) xf86OpenSerial: Cannot open device /dev/wacom
No such file or directory.
Error opening /dev/wacom : No such file or directory
(EE) xf86OpenSerial: Cannot open device /dev/wacom
No such file or directory.
Error opening /dev/wacom : No such file or directory
(II) Configured Mouse: ps2EnableDataReporting: succeededJe n'ai effectivement pas encore essayé d'allouer plus de mémoire vidéo, mais faut dire que j'ai alloué 16 mo un peu au pifomètre, en me disant que si je lui en donne trop ça risque de ralentir les applications (ce qui est peut être complètement faux, j'en sais rien). Je peux toujours essayer. Il faut obligatoirement réduire la profondeur (c'est bien ça DefaultDepth ?) de 24 à 16 ?
Hors ligne
#4 Le 31/08/2006, à 19:57
- zoreye
Re : [Resolu] i810 et accélération 3D
Yes !!! ça marche, j'ai bien l'accélération 3D maintenant, j'ai alloué 32 Mo à la mémoire vidéo et j'ai réduis DefaultDepth de 24 à 16.
Avant de mettre résolu je voudrais savoir si la mémoire qu'on alloue à la vidéo est deduite de la mémoire pour faire tourner les applications (ça me paraitrait logique mais bon ma logique n'est pas forcément en adéquation avec celle de l'informatique 
)
et quel est le lien entre la DefaultDepth et la memoire vidéo ?
Quoiqu'il en soit merci dylhoxic !!!:)
Hors ligne
#5 Le 31/08/2006, à 21:01
- samyfom
Re : [Resolu] i810 et accélération 3D
DefaultDepth est le nombre de couleurs affiché. Et plus t'as de mémoire vidéo plus ça marche mieux avec un grand nombre de couleurs.
Windows XP DarkXP. :)
Ca roxx. :D
Hors ligne
#6 Le 31/08/2006, à 21:02
- samyfom
Re : [Resolu] i810 et accélération 3D
J'ai fait ça, je vais voir ce que ça donne!
Windows XP DarkXP. :)
Ca roxx. :D
Hors ligne
#7 Le 31/08/2006, à 21:25
- samyfom
Re : [Resolu] i810 et accélération 3D
J'ai alloué plus de mémoire.
Bah, ça donne la même chose qu'avant. 
Mais avec glxgears -printfps ça donne ~150 fps en plus.
Dernière modification par samyfom (Le 31/08/2006, à 21:27)
Windows XP DarkXP. :)
Ca roxx. :D
Hors ligne
#8 Le 31/08/2006, à 21:32
- zoreye
Re : [Resolu] i810 et accélération 3D
Bon alors j'ai fait quelques tests :
je suis repassé de 16 à 24 pour le DefaultDepth en gardant 32000 Ko pour la mémoire vidéo. Résultat je n'ai plus l'accélération 3D.
Je passe la mémoire vidéo à 64000 Ko, laisse le DefaultDepth à 24 : toujours pas de 3D.
Je remet la mémoire vidéo à 32000 et le DefaultDepth à 16 : et là j'ai la 3D.
J'aimerai bien comprendre pourquoi à 64 Mo j'ai pas la 3D et si la mémoire vidéo allouée est déduite de la mémoire vive.:)
Hors ligne
#9 Le 01/09/2006, à 05:29
- samyfom
Re : [Resolu] i810 et accélération 3D
Je crois que c'est parce que le i810 utilise 32 MO au max.
En fait, moi aussi j'ai la 3D, mais j'ai les même blèmes avec les jeux 256 couleurs sous Cube, Nexuiz, Tremulous)... T'arrives à les faire marcher Zoreye??
Windows XP DarkXP. :)
Ca roxx. :D
Hors ligne
#10 Le 01/09/2006, à 14:51
- samyfom
Re : [Resolu] i810 et accélération 3D
Zoreye, tu t'es barré??
Dernière modification par samyfom (Le 01/09/2006, à 15:00)
Windows XP DarkXP. :)
Ca roxx. :D
Hors ligne
#11 Le 01/09/2006, à 17:23
- zoreye
Re : [Resolu] i810 et accélération 3D
J'étais au taf et j'ai pas eu une minute. Je n'ai pas essayé les jeux en fait. Merci pour l'info, je comprend maintenant pourquoi ça ne marche pas avec + de 32mo.
On considère cque c'est résolu ?
Hors ligne
#12 Le 01/09/2006, à 19:07
- dylhoxic
Re : [Resolu] i810 et accélération 3D
@zoreye : ce serait pas mal de le documenter sur le wiki ;-)
++
Kubuntu++
Hors ligne
#13 Le 01/09/2006, à 23:31
- samyfom
Re : [Resolu] i810 et accélération 3D
Met un [Résolu] s'il te plaît.
Windows XP DarkXP. :)
Ca roxx. :D
Hors ligne