#1 Le 17/08/2011, à 20:21
- Majes
Changer de pilote graphique avec une puce intel HD graphics
Bonjour,
Il y a quelques temps je postais un message expliquant que quand je lançait un de mes jeux (Minecraft en l’occurrence) mon interface graphique plantait. En étudiant le rapport de plantage fourni par le terminal au redémarrage, il s'avère que des gens plus compétents que moi on déduit que le problème venait des pilotes de ma puce intégrée a mon pc portable Acer Aspire 5742Z (Intel HD graphics)
Les pilotes ont changé une fois que j'ai mis a jour ubuntu de 10.10 vers 11.04, et donc il faudrait trouver un pilote plus ancien que celui que j'ai actuellement, si j'ai bien compris.
Mes questions sont donc; Comment savoir de quand date mon pilote, si il est libre ou non, comment le remplacer par un plus vieux?
Vais-je pouvoir rejouer a Minecraft sous Linux ? (forever alone.)
Aussi, je n'ai pas de fichier "/etc/X11/xorg.conf" comme cité ici, mais j'ai bien l'autre;
[ 20.563]
X.Org X Server 1.10.1
Release Date: 2011-04-15
[ 20.563] X Protocol Version 11, Revision 0
[ 20.563] Build Operating System: Linux 2.6.24-29-server i686 Ubuntu
[ 20.563] Current Operating System: Linux Majes-C 2.6.38-11-generic-pae #50-Ubuntu SMP Mon Sep 12 22:21:04 UTC 2011 i686
[ 20.563] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.38-11-generic-pae root=UUID=91dd030b-91cc-427d-b29f-d4cb153a6c1e ro splash vga=789 quiet splash vt.handoff=7
[ 20.563] Build Date: 11 August 2011 03:47:56PM
[ 20.563] xorg-server 2:1.10.1-1ubuntu1.2 (For technical support please see http://www.ubuntu.com/support)
[ 20.563] Current version of pixman: 0.20.2
[ 20.563] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 20.563] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 20.563] (==) Log file: "/var/log/Xorg.0.log", Time: Wed Sep 21 16:23:14 2011
[ 20.574] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 20.574] (==) No Layout section. Using the first Screen section.
[ 20.574] (==) No screen section available. Using defaults.
[ 20.574] (**) |-->Screen "Default Screen Section" (0)
[ 20.574] (**) | |-->Monitor "<default monitor>"
[ 20.574] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 20.574] (==) Automatically adding devices
[ 20.574] (==) Automatically enabling devices
[ 20.575] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[ 20.575] Entry deleted from font path.
[ 20.575] (WW) The directory "/usr/share/fonts/X11/100dpi/" does not exist.
[ 20.575] Entry deleted from font path.
[ 20.575] (WW) The directory "/usr/share/fonts/X11/75dpi/" does not exist.
[ 20.575] Entry deleted from font path.
[ 20.575] (WW) The directory "/usr/share/fonts/X11/100dpi" does not exist.
[ 20.575] Entry deleted from font path.
[ 20.575] (WW) The directory "/usr/share/fonts/X11/75dpi" does not exist.
[ 20.575] Entry deleted from font path.
[ 20.575] (==) FontPath set to:
/usr/share/fonts/X11/misc,
/usr/share/fonts/X11/Type1,
/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType,
built-ins
[ 20.575] (==) ModulePath set to "/usr/lib/xorg/extra-modules,/usr/lib/xorg/modules"
[ 20.575] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 20.575] (II) Loader magic: 0x81ffde0
[ 20.575] (II) Module ABI versions:
[ 20.575] X.Org ANSI C Emulation: 0.4
[ 20.575] X.Org Video Driver: 10.0
[ 20.575] X.Org XInput driver : 12.3
[ 20.575] X.Org Server Extension : 5.0
[ 20.575] (--) PCI:*(0:0:2:0) 8086:0046:1025:0487 rev 2, Mem @ 0xb0000000/4194304, 0xa0000000/268435456, I/O @ 0x00003050/8
[ 20.576] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 20.576] (II) LoadModule: "extmod"
[ 20.583] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[ 20.583] (II) Module extmod: vendor="X.Org Foundation"
[ 20.583] compiled for 1.10.1, module version = 1.0.0
[ 20.583] Module class: X.Org Server Extension
[ 20.583] ABI class: X.Org Server Extension, version 5.0
[ 20.583] (II) Loading extension MIT-SCREEN-SAVER
[ 20.583] (II) Loading extension XFree86-VidModeExtension
[ 20.583] (II) Loading extension XFree86-DGA
[ 20.583] (II) Loading extension DPMS
[ 20.583] (II) Loading extension XVideo
[ 20.583] (II) Loading extension XVideo-MotionCompensation
[ 20.583] (II) Loading extension X-Resource
[ 20.583] (II) LoadModule: "dbe"
[ 20.583] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[ 20.584] (II) Module dbe: vendor="X.Org Foundation"
[ 20.584] compiled for 1.10.1, module version = 1.0.0
[ 20.584] Module class: X.Org Server Extension
[ 20.584] ABI class: X.Org Server Extension, version 5.0
[ 20.584] (II) Loading extension DOUBLE-BUFFER
[ 20.584] (II) LoadModule: "glx"
[ 20.584] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 20.584] (II) Module glx: vendor="X.Org Foundation"
[ 20.584] compiled for 1.10.1, module version = 1.0.0
[ 20.584] ABI class: X.Org Server Extension, version 5.0
[ 20.584] (==) AIGLX enabled
[ 20.584] (II) Loading extension GLX
[ 20.584] (II) LoadModule: "record"
[ 20.584] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[ 20.584] (II) Module record: vendor="X.Org Foundation"
[ 20.584] compiled for 1.10.1, module version = 1.13.0
[ 20.584] Module class: X.Org Server Extension
[ 20.584] ABI class: X.Org Server Extension, version 5.0
[ 20.584] (II) Loading extension RECORD
[ 20.584] (II) LoadModule: "dri"
[ 20.584] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[ 20.584] (II) Module dri: vendor="X.Org Foundation"
[ 20.584] compiled for 1.10.1, module version = 1.0.0
[ 20.584] ABI class: X.Org Server Extension, version 5.0
[ 20.584] (II) Loading extension XFree86-DRI
[ 20.584] (II) LoadModule: "dri2"
[ 20.584] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 20.584] (II) Module dri2: vendor="X.Org Foundation"
[ 20.585] compiled for 1.10.1, module version = 1.2.0
[ 20.585] ABI class: X.Org Server Extension, version 5.0
[ 20.585] (II) Loading extension DRI2
[ 20.585] (==) Matched intel as autoconfigured driver 0
[ 20.585] (==) Matched vesa as autoconfigured driver 1
[ 20.585] (==) Matched fbdev as autoconfigured driver 2
[ 20.585] (==) Assigned the driver to the xf86ConfigLayout
[ 20.585] (II) LoadModule: "intel"
[ 20.604] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[ 20.604] (II) Module intel: vendor="X.Org Foundation"
[ 20.604] compiled for 1.10.1, module version = 2.14.0
[ 20.604] Module class: X.Org Video Driver
[ 20.604] ABI class: X.Org Video Driver, version 10.0
[ 20.604] (II) LoadModule: "vesa"
[ 20.604] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[ 20.604] (II) Module vesa: vendor="X.Org Foundation"
[ 20.604] compiled for 1.10.0, module version = 2.3.0
[ 20.604] Module class: X.Org Video Driver
[ 20.604] ABI class: X.Org Video Driver, version 10.0
[ 20.604] (II) LoadModule: "fbdev"
[ 20.605] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[ 20.605] (II) Module fbdev: vendor="X.Org Foundation"
[ 20.605] compiled for 1.10.0, module version = 0.4.2
[ 20.605] ABI class: X.Org Video Driver, version 10.0
[ 20.605] (II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G, 915G,
E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G,
965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45,
4 Series, G45/G43, Q45/Q43, G41, B43, B43, Clarkdale, Arrandale,
Sandybridge, Sandybridge, Sandybridge, Sandybridge, Sandybridge,
Sandybridge, Sandybridge
[ 20.605] (II) VESA: driver for VESA chipsets: vesa
[ 20.605] (II) FBDEV: driver for framebuffer: fbdev
[ 20.605] (++) using VT number 7
[ 20.607] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[ 20.607] (WW) Falling back to old probe method for vesa
[ 20.607] (WW) Falling back to old probe method for fbdev
[ 20.607] (II) Loading sub module "fbdevhw"
[ 20.607] (II) LoadModule: "fbdevhw"
[ 20.607] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[ 20.607] (II) Module fbdevhw: vendor="X.Org Foundation"
[ 20.607] compiled for 1.10.1, module version = 0.0.2
[ 20.607] ABI class: X.Org Video Driver, version 10.0
[ 20.607] drmOpenDevice: node name is /dev/dri/card0
[ 20.607] drmOpenDevice: open result is 8, (OK)
[ 20.607] drmOpenByBusid: Searching for BusID pci:0000:00:02.0
[ 20.607] drmOpenDevice: node name is /dev/dri/card0
[ 20.607] drmOpenDevice: open result is 8, (OK)
[ 20.607] drmOpenByBusid: drmOpenMinor returns 8
[ 20.607] drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
[ 20.607] (II) intel(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 20.607] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[ 20.607] (==) intel(0): RGB weight 888
[ 20.607] (==) intel(0): Default visual is TrueColor
[ 20.607] (II) intel(0): Integrated Graphics Chipset: Intel(R) Arrandale
[ 20.607] (--) intel(0): Chipset: "Arrandale"
[ 20.607] (**) intel(0): Relaxed fencing enabled
[ 20.608] (**) intel(0): Tiling enabled
[ 20.608] (**) intel(0): SwapBuffers wait enabled
[ 20.608] (==) intel(0): video overlay key set to 0x101fe
[ 20.608] (II) intel(0): Output LVDS1 has no monitor section
[ 20.708] (II) intel(0): found backlight control interface /sys/class/backlight/acpi_video0
[ 20.708] (II) intel(0): Output VGA1 has no monitor section
[ 20.712] (II) intel(0): Output HDMI1 has no monitor section
[ 20.714] (II) intel(0): Output DP1 has no monitor section
[ 20.714] (II) intel(0): EDID for output LVDS1
[ 20.714] (II) intel(0): Manufacturer: AUO Model: 22ec Serial#: 0
[ 20.714] (II) intel(0): Year: 2009 Week: 1
[ 20.714] (II) intel(0): EDID Version: 1.3
[ 20.714] (II) intel(0): Digital Display Input
[ 20.714] (II) intel(0): Max Image Size [cm]: horiz.: 34 vert.: 19
[ 20.714] (II) intel(0): Gamma: 2.20
[ 20.714] (II) intel(0): No DPMS capabilities specified
[ 20.714] (II) intel(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[ 20.714] (II) intel(0): First detailed timing is preferred mode
[ 20.714] (II) intel(0): redX: 0.620 redY: 0.340 greenX: 0.330 greenY: 0.570
[ 20.714] (II) intel(0): blueX: 0.150 blueY: 0.060 whiteX: 0.313 whiteY: 0.329
[ 20.714] (II) intel(0): Manufacturer's mask: 0
[ 20.714] (II) intel(0): Supported detailed timing:
[ 20.714] (II) intel(0): clock: 69.3 MHz Image Size: 344 x 193 mm
[ 20.714] (II) intel(0): h_active: 1366 h_sync: 1398 h_sync_end 1422 h_blank_end 1432 h_border: 0
[ 20.714] (II) intel(0): v_active: 768 v_sync: 771 v_sync_end 775 v_blanking: 806 v_border: 0
[ 20.714] (II) intel(0): Unknown vendor-specific block f
[ 20.714] (II) intel(0): AUO
[ 20.714] (II) intel(0): B156XW02 V2
[ 20.714] (II) intel(0): EDID (in hex):
[ 20.714] (II) intel(0): 00ffffffffffff0006afec2200000000
[ 20.714] (II) intel(0): 01130103802213780ac8959e57549226
[ 20.714] (II) intel(0): 0f505400000001010101010101010101
[ 20.714] (II) intel(0): 010101010101121b5642500026302018
[ 20.714] (II) intel(0): 340058c1100000180000000f00000000
[ 20.714] (II) intel(0): 00000000000000000020000000fe0041
[ 20.714] (II) intel(0): 554f0a202020202020202020000000fe
[ 20.714] (II) intel(0): 004231353658573032205632200a00c0
[ 20.714] (II) intel(0): EDID vendor "AUO", prod id 8940
[ 20.714] (II) intel(0): Printing DDC gathered Modelines:
[ 20.714] (II) intel(0): Modeline "1366x768"x0.0 69.30 1366 1398 1422 1432 768 771 775 806 -hsync -vsync (48.4 kHz)
[ 20.714] (II) intel(0): Not using default mode "320x240" (doublescan mode not supported)
[ 20.714] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[ 20.714] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[ 20.714] (II) intel(0): Not using default mode "512x384" (doublescan mode not supported)
[ 20.714] (II) intel(0): Not using default mode "640x480" (doublescan mode not supported)
[ 20.714] (II) intel(0): Not using default mode "640x512" (doublescan mode not supported)
[ 20.714] (II) intel(0): Not using default mode "800x600" (doublescan mode not supported)
[ 20.714] (II) intel(0): Not using default mode "896x672" (doublescan mode not supported)
[ 20.714] (II) intel(0): Not using default mode "928x696" (doublescan mode not supported)
[ 20.714] (II) intel(0): Not using default mode "960x720" (doublescan mode not supported)
[ 20.714] (II) intel(0): Not using default mode "576x432" (doublescan mode not supported)
[ 20.714] (II) intel(0): Not using default mode "680x384" (doublescan mode not supported)
[ 20.714] (II) intel(0): Not using default mode "680x384" (doublescan mode not supported)
[ 20.714] (II) intel(0): Not using default mode "700x525" (doublescan mode not supported)
[ 20.714] (II) intel(0): Not using default mode "720x450" (doublescan mode not supported)
[ 20.714] (II) intel(0): Not using default mode "800x512" (doublescan mode not supported)
[ 20.714] (II) intel(0): Not using default mode "840x525" (doublescan mode not supported)
[ 20.715] (II) intel(0): Not using default mode "840x525" (doublescan mode not supported)
[ 20.715] (II) intel(0): Not using default mode "960x540" (doublescan mode not supported)
[ 20.715] (II) intel(0): Not using default mode "960x600" (doublescan mode not supported)
[ 20.715] (II) intel(0): Not using default mode "1024x768" (doublescan mode not supported)
[ 20.715] (II) intel(0): Printing probed modes for output LVDS1
[ 20.715] (II) intel(0): Modeline "1366x768"x60.0 69.30 1366 1398 1422 1432 768 771 775 806 -hsync -vsync (48.4 kHz)
[ 20.715] (II) intel(0): Modeline "1360x768"x59.8 84.75 1360 1432 1568 1776 768 771 781 798 -hsync +vsync (47.7 kHz)
[ 20.715] (II) intel(0): Modeline "1360x768"x60.0 72.00 1360 1408 1440 1520 768 771 781 790 +hsync -vsync (47.4 kHz)
[ 20.715] (II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
[ 20.715] (II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
[ 20.715] (II) intel(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
[ 20.715] (II) intel(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
[ 20.715] (II) intel(0): EDID for output VGA1
[ 20.719] (II) intel(0): EDID for output HDMI1
[ 20.720] (II) intel(0): EDID for output DP1
[ 20.720] (II) intel(0): Output LVDS1 connected
[ 20.720] (II) intel(0): Output VGA1 disconnected
[ 20.721] (II) intel(0): Output HDMI1 disconnected
[ 20.721] (II) intel(0): Output DP1 disconnected
[ 20.721] (II) intel(0): Using exact sizes for initial modes
[ 20.721] (II) intel(0): Output LVDS1 using initial mode 1366x768
[ 20.721] (II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[ 20.721] (II) intel(0): Kernel page flipping support detected, enabling
[ 20.721] (**) intel(0): Display dimensions: (340, 190) mm
[ 20.721] (**) intel(0): DPI set to (102, 102)
[ 20.721] (II) Loading sub module "fb"
[ 20.721] (II) LoadModule: "fb"
[ 20.721] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 20.721] (II) Module fb: vendor="X.Org Foundation"
[ 20.721] compiled for 1.10.1, module version = 1.0.0
[ 20.721] ABI class: X.Org ANSI C Emulation, version 0.4
[ 20.721] (II) UnloadModule: "vesa"
[ 20.721] (II) Unloading vesa
[ 20.721] (II) UnloadModule: "fbdev"
[ 20.721] (II) Unloading fbdev
[ 20.721] (II) UnloadModule: "fbdevhw"
[ 20.721] (II) Unloading fbdevhw
[ 20.721] (==) Depth 24 pixmap format is 32 bpp
[ 20.721] (==) intel(0): VideoRam: 262144 KB
[ 20.721] (II) intel(0): [DRI2] Setup complete
[ 20.721] (II) intel(0): [DRI2] DRI driver: i965
[ 20.721] (II) intel(0): Allocated new frame buffer 1408x768 stride 5632, tiled
[ 20.729] (II) UXA(0): Driver registered support for the following operations:
[ 20.730] (II) solid
[ 20.730] (II) copy
[ 20.730] (II) composite (RENDER acceleration)
[ 20.730] (II) put_image
[ 20.730] (II) get_image
[ 20.730] (==) intel(0): Backing store disabled
[ 20.730] (==) intel(0): Silken mouse enabled
[ 20.730] (II) intel(0): Initializing HW Cursor
[ 20.800] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 20.801] (==) intel(0): DPMS enabled
[ 20.801] (==) intel(0): Intel XvMC decoder enabled
[ 20.801] (II) intel(0): Set up textured video
[ 20.801] (II) intel(0): [XvMC] xvmc_vld driver initialized.
[ 20.801] (II) intel(0): direct rendering: DRI2 Enabled
[ 20.801] (==) intel(0): hotplug detection: "enabled"
[ 20.801] (--) RandR disabled
[ 20.801] (II) Initializing built-in extension Generic Event Extension
[ 20.801] (II) Initializing built-in extension SHAPE
[ 20.801] (II) Initializing built-in extension MIT-SHM
[ 20.801] (II) Initializing built-in extension XInputExtension
[ 20.801] (II) Initializing built-in extension XTEST
[ 20.801] (II) Initializing built-in extension BIG-REQUESTS
[ 20.801] (II) Initializing built-in extension SYNC
[ 20.801] (II) Initializing built-in extension XKEYBOARD
[ 20.801] (II) Initializing built-in extension XC-MISC
[ 20.801] (II) Initializing built-in extension SECURITY
[ 20.801] (II) Initializing built-in extension XINERAMA
[ 20.801] (II) Initializing built-in extension XFIXES
[ 20.801] (II) Initializing built-in extension RENDER
[ 20.801] (II) Initializing built-in extension RANDR
[ 20.801] (II) Initializing built-in extension COMPOSITE
[ 20.801] (II) Initializing built-in extension DAMAGE
[ 20.801] (II) Initializing built-in extension GESTURE
[ 20.812] (II) AIGLX: Trying DRI driver /usr/lib/dri/i965_dri.so
[ 20.815] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[ 20.815] (II) AIGLX: enabled GLX_INTEL_swap_event
[ 20.815] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[ 20.815] (II) AIGLX: enabled GLX_SGI_make_current_read
[ 20.815] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[ 20.815] (II) AIGLX: Loaded and initialized i965
[ 20.815] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 20.816] (II) intel(0): Setting screen physical size to 361 x 203
[ 20.823] (II) XKB: reuse xkmfile /var/lib/xkb/server-B20D7FC79C7F597315E3E501AEF10E0D866E8E92.xkm
[ 20.832] (II) config/udev: Adding input device Power Button (/dev/input/event3)
[ 20.832] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 20.832] (II) LoadModule: "evdev"
[ 20.832] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 20.832] (II) Module evdev: vendor="X.Org Foundation"
[ 20.832] compiled for 1.10.0.902, module version = 2.6.0
[ 20.832] Module class: X.Org XInput Driver
[ 20.832] ABI class: X.Org XInput driver, version 12.3
[ 20.832] (II) Using input driver 'evdev' for 'Power Button'
[ 20.832] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 20.832] (**) Power Button: always reports core events
[ 20.832] (**) Power Button: Device: "/dev/input/event3"
[ 20.860] (--) Power Button: Found keys
[ 20.860] (II) Power Button: Configuring as keyboard
[ 20.860] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input3/event3"
[ 20.860] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
[ 20.860] (**) Option "xkb_rules" "evdev"
[ 20.860] (**) Option "xkb_model" "pc105"
[ 20.860] (**) Option "xkb_layout" "fr"
[ 20.860] (**) Option "xkb_variant" "oss"
[ 20.862] (II) XKB: reuse xkmfile /var/lib/xkb/server-6CCE7350BC740BB33D520367F4A10E64192A358C.xkm
[ 20.863] (II) config/udev: Adding input device Video Bus (/dev/input/event9)
[ 20.863] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 20.863] (II) Using input driver 'evdev' for 'Video Bus'
[ 20.863] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 20.863] (**) Video Bus: always reports core events
[ 20.863] (**) Video Bus: Device: "/dev/input/event9"
[ 20.884] (--) Video Bus: Found keys
[ 20.884] (II) Video Bus: Configuring as keyboard
[ 20.884] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input9/event9"
[ 20.884] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD)
[ 20.884] (**) Option "xkb_rules" "evdev"
[ 20.884] (**) Option "xkb_model" "pc105"
[ 20.884] (**) Option "xkb_layout" "fr"
[ 20.884] (**) Option "xkb_variant" "oss"
[ 21.984] (II) config/udev: Adding input device Power Button (/dev/input/event0)
[ 21.984] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 21.984] (II) Using input driver 'evdev' for 'Power Button'
[ 21.984] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 21.984] (**) Power Button: always reports core events
[ 21.984] (**) Power Button: Device: "/dev/input/event0"
[ 22.016] (--) Power Button: Found keys
[ 22.016] (II) Power Button: Configuring as keyboard
[ 22.016] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/device:0d/PNP0C0C:00/input/input0/event0"
[ 22.016] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
[ 22.016] (**) Option "xkb_rules" "evdev"
[ 22.016] (**) Option "xkb_model" "pc105"
[ 22.016] (**) Option "xkb_layout" "fr"
[ 22.016] (**) Option "xkb_variant" "oss"
[ 22.016] (II) config/udev: Adding input device Lid Switch (/dev/input/event1)
[ 22.016] (II) No input driver/identifier specified (ignoring)
[ 22.017] (II) config/udev: Adding input device Sleep Button (/dev/input/event2)
[ 22.017] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[ 22.017] (II) Using input driver 'evdev' for 'Sleep Button'
[ 22.017] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 22.017] (**) Sleep Button: always reports core events
[ 22.017] (**) Sleep Button: Device: "/dev/input/event2"
[ 22.048] (--) Sleep Button: Found keys
[ 22.048] (II) Sleep Button: Configuring as keyboard
[ 22.048] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/device:0d/PNP0C0E:00/input/input2/event2"
[ 22.048] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD)
[ 22.048] (**) Option "xkb_rules" "evdev"
[ 22.048] (**) Option "xkb_model" "pc105"
[ 22.048] (**) Option "xkb_layout" "fr"
[ 22.048] (**) Option "xkb_variant" "oss"
[ 22.051] (II) config/udev: Adding input device 1.3M WebCam (/dev/input/event8)
[ 22.051] (**) 1.3M WebCam: Applying InputClass "evdev keyboard catchall"
[ 22.051] (II) Using input driver 'evdev' for '1.3M WebCam'
[ 22.051] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 22.051] (**) 1.3M WebCam: always reports core events
[ 22.051] (**) 1.3M WebCam: Device: "/dev/input/event8"
[ 22.080] (--) 1.3M WebCam: Found keys
[ 22.080] (II) 1.3M WebCam: Configuring as keyboard
[ 22.080] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1/1-1.1:1.0/input/input8/event8"
[ 22.080] (II) XINPUT: Adding extended input device "1.3M WebCam" (type: KEYBOARD)
[ 22.080] (**) Option "xkb_rules" "evdev"
[ 22.080] (**) Option "xkb_model" "pc105"
[ 22.080] (**) Option "xkb_layout" "fr"
[ 22.080] (**) Option "xkb_variant" "oss"
[ 22.081] (II) config/udev: Adding input device HDA Intel Mic (/dev/input/event10)
[ 22.081] (II) No input driver/identifier specified (ignoring)
[ 22.082] (II) config/udev: Adding input device HDA Intel Headphone (/dev/input/event11)
[ 22.082] (II) No input driver/identifier specified (ignoring)
[ 22.083] (II) config/udev: Adding input device Microsoft Microsoft® Nano Transceiver v2.0 (/dev/input/event5)
[ 22.083] (**) Microsoft Microsoft® Nano Transceiver v2.0: Applying InputClass "evdev keyboard catchall"
[ 22.083] (II) Using input driver 'evdev' for 'Microsoft Microsoft® Nano Transceiver v2.0'
[ 22.083] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 22.083] (**) Microsoft Microsoft® Nano Transceiver v2.0: always reports core events
[ 22.083] (**) Microsoft Microsoft® Nano Transceiver v2.0: Device: "/dev/input/event5"
[ 22.124] (--) Microsoft Microsoft® Nano Transceiver v2.0: Found keys
[ 22.124] (II) Microsoft Microsoft® Nano Transceiver v2.0: Configuring as keyboard
[ 22.124] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.1/2-1.1:1.0/input/input5/event5"
[ 22.124] (II) XINPUT: Adding extended input device "Microsoft Microsoft® Nano Transceiver v2.0" (type: KEYBOARD)
[ 22.124] (**) Option "xkb_rules" "evdev"
[ 22.124] (**) Option "xkb_model" "pc105"
[ 22.124] (**) Option "xkb_layout" "fr"
[ 22.124] (**) Option "xkb_variant" "oss"
[ 22.125] (II) config/udev: Adding input device Microsoft Microsoft® Nano Transceiver v2.0 (/dev/input/event6)
[ 22.125] (**) Microsoft Microsoft® Nano Transceiver v2.0: Applying InputClass "evdev pointer catchall"
[ 22.125] (**) Microsoft Microsoft® Nano Transceiver v2.0: Applying InputClass "evdev keyboard catchall"
[ 22.125] (II) Using input driver 'evdev' for 'Microsoft Microsoft® Nano Transceiver v2.0'
[ 22.125] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 22.125] (**) Microsoft Microsoft® Nano Transceiver v2.0: always reports core events
[ 22.125] (**) Microsoft Microsoft® Nano Transceiver v2.0: Device: "/dev/input/event6"
[ 22.152] (--) Microsoft Microsoft® Nano Transceiver v2.0: Found 9 mouse buttons
[ 22.152] (--) Microsoft Microsoft® Nano Transceiver v2.0: Found scroll wheel(s)
[ 22.152] (--) Microsoft Microsoft® Nano Transceiver v2.0: Found relative axes
[ 22.152] (--) Microsoft Microsoft® Nano Transceiver v2.0: Found x and y relative axes
[ 22.152] (--) Microsoft Microsoft® Nano Transceiver v2.0: Found absolute axes
[ 22.152] (II) evdev-grail: failed to open grail, no gesture support
[ 22.152] (--) Microsoft Microsoft® Nano Transceiver v2.0: Found keys
[ 22.152] (II) Microsoft Microsoft® Nano Transceiver v2.0: Configuring as mouse
[ 22.152] (II) Microsoft Microsoft® Nano Transceiver v2.0: Configuring as keyboard
[ 22.152] (II) Microsoft Microsoft® Nano Transceiver v2.0: Adding scrollwheel support
[ 22.152] (**) Microsoft Microsoft® Nano Transceiver v2.0: YAxisMapping: buttons 4 and 5
[ 22.152] (**) Microsoft Microsoft® Nano Transceiver v2.0: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 22.152] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.1/2-1.1:1.1/input/input6/event6"
[ 22.152] (II) XINPUT: Adding extended input device "Microsoft Microsoft® Nano Transceiver v2.0" (type: KEYBOARD)
[ 22.152] (**) Option "xkb_rules" "evdev"
[ 22.152] (**) Option "xkb_model" "pc105"
[ 22.152] (**) Option "xkb_layout" "fr"
[ 22.152] (**) Option "xkb_variant" "oss"
[ 22.152] (II) Microsoft Microsoft® Nano Transceiver v2.0: initialized for relative axes.
[ 22.152] (WW) Microsoft Microsoft® Nano Transceiver v2.0: ignoring absolute axes.
[ 22.152] (**) Microsoft Microsoft® Nano Transceiver v2.0: (accel) keeping acceleration scheme 1
[ 22.152] (**) Microsoft Microsoft® Nano Transceiver v2.0: (accel) acceleration profile 0
[ 22.152] (**) Microsoft Microsoft® Nano Transceiver v2.0: (accel) acceleration factor: 2.000
[ 22.152] (**) Microsoft Microsoft® Nano Transceiver v2.0: (accel) acceleration threshold: 4
[ 22.153] (II) config/udev: Adding input device Microsoft Microsoft® Nano Transceiver v2.0 (/dev/input/mouse0)
[ 22.153] (II) No input driver/identifier specified (ignoring)
[ 22.153] (II) config/udev: Adding input device Microsoft Microsoft® Nano Transceiver v2.0 (/dev/input/event7)
[ 22.153] (**) Microsoft Microsoft® Nano Transceiver v2.0: Applying InputClass "evdev keyboard catchall"
[ 22.153] (II) Using input driver 'evdev' for 'Microsoft Microsoft® Nano Transceiver v2.0'
[ 22.153] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 22.153] (**) Microsoft Microsoft® Nano Transceiver v2.0: always reports core events
[ 22.153] (**) Microsoft Microsoft® Nano Transceiver v2.0: Device: "/dev/input/event7"
[ 22.184] (--) Microsoft Microsoft® Nano Transceiver v2.0: Found 1 mouse buttons
[ 22.184] (--) Microsoft Microsoft® Nano Transceiver v2.0: Found scroll wheel(s)
[ 22.184] (--) Microsoft Microsoft® Nano Transceiver v2.0: Found relative axes
[ 22.184] (--) Microsoft Microsoft® Nano Transceiver v2.0: Found absolute axes
[ 22.184] (--) Microsoft Microsoft® Nano Transceiver v2.0: Found x and y absolute axes
[ 22.184] (--) Microsoft Microsoft® Nano Transceiver v2.0: Found keys
[ 22.184] (II) Microsoft Microsoft® Nano Transceiver v2.0: Configuring as mouse
[ 22.184] (II) Microsoft Microsoft® Nano Transceiver v2.0: Configuring as keyboard
[ 22.184] (II) Microsoft Microsoft® Nano Transceiver v2.0: Adding scrollwheel support
[ 22.184] (**) Microsoft Microsoft® Nano Transceiver v2.0: YAxisMapping: buttons 4 and 5
[ 22.184] (**) Microsoft Microsoft® Nano Transceiver v2.0: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 22.184] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.1/2-1.1:1.2/input/input7/event7"
[ 22.184] (II) XINPUT: Adding extended input device "Microsoft Microsoft® Nano Transceiver v2.0" (type: KEYBOARD)
[ 22.184] (**) Option "xkb_rules" "evdev"
[ 22.184] (**) Option "xkb_model" "pc105"
[ 22.184] (**) Option "xkb_layout" "fr"
[ 22.184] (**) Option "xkb_variant" "oss"
[ 22.185] (EE) Microsoft Microsoft® Nano Transceiver v2.0: failed to initialize for relative axes.
[ 22.186] (WW) Touch X valuator does not match pointer X valuator, pointer emulation may be incorrect
[ 22.186] (WW) Touch Y valuator does not match pointer Y valuator, pointer emulation may be incorrect
[ 22.186] (II) Microsoft Microsoft® Nano Transceiver v2.0: initialized for absolute axes.
[ 22.186] (**) Microsoft Microsoft® Nano Transceiver v2.0: (accel) keeping acceleration scheme 1
[ 22.186] (**) Microsoft Microsoft® Nano Transceiver v2.0: (accel) acceleration profile 0
[ 22.186] (**) Microsoft Microsoft® Nano Transceiver v2.0: (accel) acceleration factor: 2.000
[ 22.186] (**) Microsoft Microsoft® Nano Transceiver v2.0: (accel) acceleration threshold: 4
[ 22.187] (II) config/udev: Adding input device Microsoft Microsoft® Nano Transceiver v2.0 (/dev/input/js0)
[ 22.187] (II) No input driver/identifier specified (ignoring)
[ 22.190] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event4)
[ 22.190] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[ 22.190] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[ 22.190] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 22.190] (**) AT Translated Set 2 keyboard: always reports core events
[ 22.190] (**) AT Translated Set 2 keyboard: Device: "/dev/input/event4"
[ 22.228] (--) AT Translated Set 2 keyboard: Found keys
[ 22.228] (II) AT Translated Set 2 keyboard: Configuring as keyboard
[ 22.228] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input4/event4"
[ 22.228] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD)
[ 22.228] (**) Option "xkb_rules" "evdev"
[ 22.228] (**) Option "xkb_model" "pc105"
[ 22.228] (**) Option "xkb_layout" "fr"
[ 22.228] (**) Option "xkb_variant" "oss"
[ 22.242] (II) config/udev: Adding input device ETPS/2 Elantech Touchpad (/dev/input/event12)
[ 22.242] (**) ETPS/2 Elantech Touchpad: Applying InputClass "evdev touchpad catchall"
[ 22.242] (**) ETPS/2 Elantech Touchpad: Applying InputClass "touchpad catchall"
[ 22.243] (II) LoadModule: "synaptics"
[ 22.243] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[ 22.243] (II) Module synaptics: vendor="X.Org Foundation"
[ 22.243] compiled for 1.10.1, module version = 1.3.99
[ 22.243] Module class: X.Org XInput Driver
[ 22.243] ABI class: X.Org XInput driver, version 12.3
[ 22.243] (II) Using input driver 'synaptics' for 'ETPS/2 Elantech Touchpad'
[ 22.243] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[ 22.243] (**) ETPS/2 Elantech Touchpad: always reports core events
[ 22.243] (**) Option "Device" "/dev/input/event12"
[ 22.320] (--) ETPS/2 Elantech Touchpad: x-axis range 8 - 1144
[ 22.320] (--) ETPS/2 Elantech Touchpad: y-axis range 8 - 760
[ 22.320] (II) ETPS/2 Elantech Touchpad: device does not report pressure, will use touch data.
[ 22.320] (--) ETPS/2 Elantech Touchpad: buttons: left right double triple
[ 22.320] (--) ETPS/2 Elantech Touchpad: invalid pressure range. defaulting to 0 - 256
[ 22.320] (--) ETPS/2 Elantech Touchpad: invalid finger width range. defaulting to 0 - 16
[ 22.324] (--) ETPS/2 Elantech Touchpad: touchpad found
[ 22.324] (**) ETPS/2 Elantech Touchpad: always reports core events
[ 22.324] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input12/event12"
[ 22.324] (II) XINPUT: Adding extended input device "ETPS/2 Elantech Touchpad" (type: TOUCHPAD)
[ 22.324] (**) ETPS/2 Elantech Touchpad: (accel) MinSpeed is now constant deceleration 2.5
[ 22.324] (**) ETPS/2 Elantech Touchpad: MaxSpeed is now 1.75
[ 22.324] (**) ETPS/2 Elantech Touchpad: AccelFactor is now 0.147
[ 22.324] (**) ETPS/2 Elantech Touchpad: (accel) keeping acceleration scheme 1
[ 22.324] (**) ETPS/2 Elantech Touchpad: (accel) acceleration profile 1
[ 22.324] (**) ETPS/2 Elantech Touchpad: (accel) acceleration factor: 2.000
[ 22.324] (**) ETPS/2 Elantech Touchpad: (accel) acceleration threshold: 4
[ 22.328] (II) ETPS/2 Elantech Touchpad: failed to open grail, no gesture support
[ 22.328] (--) ETPS/2 Elantech Touchpad: touchpad found
[ 22.328] (II) config/udev: Adding input device ETPS/2 Elantech Touchpad (/dev/input/mouse1)
[ 22.328] (II) No input driver/identifier specified (ignoring)
[ 22.381] (II) XKB: reuse xkmfile /var/lib/xkb/server-9A8405F3FE0A780485714A4B6DD41909C2CF9F83.xkm
[ 22.643] (II) intel(0): EDID vendor "AUO", prod id 8940
[ 22.643] (II) intel(0): Printing DDC gathered Modelines:
[ 22.643] (II) intel(0): Modeline "1366x768"x0.0 69.30 1366 1398 1422 1432 768 771 775 806 -hsync -vsync (48.4 kHz)
[ 22.650] (II) intel(0): EDID vendor "AUO", prod id 8940
[ 22.650] (II) intel(0): Printing DDC gathered Modelines:
[ 22.650] (II) intel(0): Modeline "1366x768"x0.0 69.30 1366 1398 1422 1432 768 771 775 806 -hsync -vsync (48.4 kHz)
[ 22.657] (II) intel(0): EDID vendor "AUO", prod id 8940
[ 22.657] (II) intel(0): Printing DDC gathered Modelines:
[ 22.657] (II) intel(0): Modeline "1366x768"x0.0 69.30 1366 1398 1422 1432 768 771 775 806 -hsync -vsync (48.4 kHz)
[ 22.663] (II) intel(0): EDID vendor "AUO", prod id 8940
[ 22.663] (II) intel(0): Printing DDC gathered Modelines:
[ 22.663] (II) intel(0): Modeline "1366x768"x0.0 69.30 1366 1398 1422 1432 768 771 775 806 -hsync -vsync (48.4 kHz)
[ 62.378] (II) XKB: reuse xkmfile /var/lib/xkb/server-0CF70113BD0CF0830F6D9334ADBCCCCFD25B9871.xkm
[ 62.699] (II) intel(0): EDID vendor "AUO", prod id 8940
[ 62.700] (II) intel(0): Printing DDC gathered Modelines:
[ 62.700] (II) intel(0): Modeline "1366x768"x0.0 69.30 1366 1398 1422 1432 768 771 775 806 -hsync -vsync (48.4 kHz)
[ 62.707] (II) intel(0): EDID vendor "AUO", prod id 8940
[ 62.707] (II) intel(0): Printing DDC gathered Modelines:
[ 62.707] (II) intel(0): Modeline "1366x768"x0.0 69.30 1366 1398 1422 1432 768 771 775 806 -hsync -vsync (48.4 kHz)
[ 62.713] (II) intel(0): EDID vendor "AUO", prod id 8940
[ 62.713] (II) intel(0): Printing DDC gathered Modelines:
[ 62.713] (II) intel(0): Modeline "1366x768"x0.0 69.30 1366 1398 1422 1432 768 771 775 806 -hsync -vsync (48.4 kHz)
[ 62.720] (II) intel(0): EDID vendor "AUO", prod id 8940
[ 62.720] (II) intel(0): Printing DDC gathered Modelines:
[ 62.720] (II) intel(0): Modeline "1366x768"x0.0 69.30 1366 1398 1422 1432 768 771 775 806 -hsync -vsync (48.4 kHz)
[ 62.822] (II) intel(0): EDID vendor "AUO", prod id 8940
[ 62.822] (II) intel(0): Printing DDC gathered Modelines:
[ 62.822] (II) intel(0): Modeline "1366x768"x0.0 69.30 1366 1398 1422 1432 768 771 775 806 -hsync -vsync (48.4 kHz)
[ 67.594] (II) intel(0): EDID vendor "AUO", prod id 8940
[ 67.594] (II) intel(0): Printing DDC gathered Modelines:
[ 67.594] (II) intel(0): Modeline "1366x768"x0.0 69.30 1366 1398 1422 1432 768 771 775 806 -hsync -vsync (48.4 kHz)
[ 69.063] (II) intel(0): EDID vendor "AUO", prod id 8940
[ 69.063] (II) intel(0): Printing DDC gathered Modelines:
[ 69.063] (II) intel(0): Modeline "1366x768"x0.0 69.30 1366 1398 1422 1432 768 771 775 806 -hsync -vsync (48.4 kHz)
[ 2835.914] (II) XKB: reuse xkmfile /var/lib/xkb/server-0CF70113BD0CF0830F6D9334ADBCCCCFD25B9871.xkm[EDIT] J'ai mis a jour le fichier /var/log/Xorg.0.log.
Voila donc 
Merci d'avance
Dernière modification par Majes (Le 21/09/2011, à 17:12)
Hors ligne
#2 Le 23/08/2011, à 10:35
- Majes
Re : Changer de pilote graphique avec une puce intel HD graphics
Allons, ne vous découragez pas
Up 
Hors ligne
#3 Le 21/09/2011, à 03:58
- pyroface
Re : Changer de pilote graphique avec une puce intel HD graphics
Salut,
bon ben c'est un peu long tout ça à lire Tu voudrais pas juste envoyer le résultat de cette commande là plutôt ça ira plus vite
grep Chipset /var/log/Xorg.0.logAprès partant de là on verra ce qu'on peut faire 
(Désolé mais j’aime bien les émoticônes )
Hors ligne
#4 Le 21/09/2011, à 16:19
- Majes
Re : Changer de pilote graphique avec une puce intel HD graphics
Ah, une réponse, merci
Tout d'abord, j'aimerais préciser qu'une ou deux semaines après le post, ça l'a de moins en moins fait... Mais quelque fois, ça me le fais quand même, donc le sujet est toujours d'actualité
Alors, pour la commande
grep Chipset /var/log/Xorg.0.logÇa renvoie ça:
[ 20.221] (II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
[ 20.224] (II) intel(0): Integrated Graphics Chipset: Intel(R) Arrandale
[ 20.224] (--) intel(0): Chipset: "Arrandale"Hors ligne
#5 Le 21/09/2011, à 17:53
- chibbata
Re : Changer de pilote graphique avec une puce intel HD graphics
il faut plutor mettre a jours le drivers vers le plus recent
sudo add-apt-repository ppa:xorg-edgers/ppasudo apt-get updatesudo apt-get upgraderedemarrer le pc
Dernière modification par chibbata (Le 21/09/2011, à 18:00)
Hors ligne
#6 Le 21/09/2011, à 18:11
- Majes
Re : Changer de pilote graphique avec une puce intel HD graphics
Le seul problème, c'est que quand je mets a jour et que je lance minecraft, l'interface graphique plante, les fenêtres disparaissent/ réapparaissent, et ainsi de suite... C'est d'ailleurs la source de mon problème ^^
Hors ligne
#7 Le 21/09/2011, à 21:07
- ArchangeGabriel
Re : Changer de pilote graphique avec une puce intel HD graphics
Oui mais chibbata te propose des drivers plus récents, qui corrigent peut-être ton problème (à moins que tu ne parles de ceux-ci).
Hors ligne
#8 Le 21/09/2011, à 21:11
- chibbata
Re : Changer de pilote graphique avec une puce intel HD graphics
je pense qu'il parle de module
charger le module intel au lieu du i810
Hors ligne
#9 Le 21/09/2011, à 21:31
- Majes
Re : Changer de pilote graphique avec une puce intel HD graphics
Oui, c'est le fait de les mettre a jour qui m'a tout fait planter, la dernière fois... Ou alors savoir lequel c'est comme ça en cas de souci pouvoir enlever le récent et remettre celui qui marche ?
Après, moi je veux bien mais si c'est pour aggraver le problème 
Dernière modification par Majes (Le 21/09/2011, à 21:33)
Hors ligne
#10 Le 21/09/2011, à 21:53
- chibbata
Re : Changer de pilote graphique avec une puce intel HD graphics
en cas de problemes,pour revenir en arriere
sudo apt-get install ppa-purgesudo ppa-purge xorg-edgersHors ligne
#11 Le 21/09/2011, à 21:55
- Majes
Re : Changer de pilote graphique avec une puce intel HD graphics
Ok j'essaye ça demain, merci bien et bonne nuit
Hors ligne
#12 Le 22/09/2011, à 16:22
- pyroface
Re : Changer de pilote graphique avec une puce intel HD graphics
Bon ben je vois que mon petit post a fait venir du monde ça fait plaisir
Sinon j'ai essayer de chercher de mon coté mais j'ai rien trouvé de très concluant a part downgrader vers la 10.10
Bon je cherche encore et si j'ai quelque chose je post
Hors ligne
#13 Le 22/09/2011, à 18:11
- Majes
Re : Changer de pilote graphique avec une puce intel HD graphics
Bon, après avoir fait ça le jeu rame moins, mon pc force moins, donc cool.
Je voulais revenir sur Firefox pour poster ce message il y a cinq minutes (ça faisait plus de 30 minutes que je jouais), et au moment de l'écrire, l'interface graphique plante.
Ce qui est sur, c'est que je ne retournerais pas en arrière, le gain de perf' est énoooorme. Ctrl + Im écran + R E I S U P ne fait rien une fois que c'est buggé 
Si jamais vous avez du nouveau, tenez moi au courant, en attendant je fermerais Minecraft pour lire vos messages
Hors ligne
#14 Le 22/09/2011, à 19:14
- chibbata
Re : Changer de pilote graphique avec une puce intel HD graphics
fait attention a la temperature du pc,le crash peut venir de là
Hors ligne
#15 Le 22/09/2011, à 21:10
- Majes
Re : Changer de pilote graphique avec une puce intel HD graphics
Je le sais bien, sous Windows quand j'allumais Team Fortress au bout de cinq minutes mon pc atteignait les 80° (foutue ventilation ), température critique du bios.
Mais bon, j'ai acheté une tablette de refroidissement, donc le problème est réglé. Cela dit, moi je suis dans le sud et c'est vrai que l'aprème il fait encore chaud chez moi, on verra dans quelques semaines pour la température
Le bug est toujours là, mais un peu moins présent, maintenant il mets du temps a arriver...
Hors ligne
#16 Le 27/09/2011, à 16:43
- Majes
Re : Changer de pilote graphique avec une puce intel HD graphics
Sorry pour le double post, mais bon, osef... J'ai mis a jour les PPAs, et le jeu ne voulait plus se lancer. Bon, j'ai fait un
sudo apt-get install ppa-purgepuis un
sudo ppa-purge xorg-edgers et tout est redevenu ok. Mais bon, du coup c'est revenu au PPAs d'avant mon post du 22/09
Donc je m'en remets a vous pour vous demander si il était possible d'upgrader les PPAs mais pas pour la version actuelle... L'avant dernière, donc.
Merci bien
Hors ligne
#17 Le 27/09/2011, à 22:10
- ArchangeGabriel
Re : Changer de pilote graphique avec une puce intel HD graphics
Il existe éventuellement un autre PPA, celui de oibaf je crois.
Hors ligne