[Résolu] Installer l'accélération 3D: je donne ma langue au chat

V1944 · Le 09/09/2006, à 20:18

Bonjour

Vous avez deviné: je planche à installer l'accélération 3D, même après avoir lu plusieurs fois la FAQ. Je viens de reconfigurer Xorg, mais glxinfo me signale à chaque fois que le Direct Rendering n'est pas installé:

glxinfo | grep direct a écrit :

Xlib: extension "XFree86-DRI" missing on display ":0.0".
direct rendering: No
OpenGL renderer string: Mesa GLX Indirect

J'ai un processeur type AMD 64, une carte graphique ATI RADEON 9250, je ne pense pas que ce soit au niveau du matériel que ça coince, puisque j'avais installé l'accélération 3D avant cette reconfiguration de Xorg.

J'ai ici l'output de dmidecode:
http://vlad.nautilus.free.fr/info_matos.txt
Et voilà mon xorg.conf:
http://forum.ubuntu-fr.org/viewtopic.php?pid=479562#p479562

Merci d'avoir lu jusqu'à la fin . Si vous sentez le vécu ou que vous avez une idée, votre avis est le bienvenu.

Dernière modification par V1944 (Le 11/09/2006, à 13:15)

michel2652 · Le 09/09/2006, à 20:35

Bonjour,,
As tu vu la documentation : http://doc.ubuntu-fr.org/materiel/ati_radeon ?

A+

V1944 · Le 10/09/2006, à 12:14

Oh que oui (je connais mêmes certaines suites de commandes par cœur maintenant). Doc, FAQ, Forum, amis, j'ai tout fait; c'est pour ça que je poste. J'ai encore lu quelques fils de discution ce matin, mais doit ils ne correspondent pas à mon matos, soit ils ne sont pas résolus.

Dernière modification par V1944 (Le 10/09/2006, à 12:15)

effraie · Le 10/09/2006, à 20:00

essaie dans l'ordre:
sudo mv /etc/X11/xorg.conf /etc/X11/xorg.conf.bak
puis sudo dpkg-reconfigure xserver-xorg
tu valides tt par défaut, sauf le drver, tu prend radeon
puis tu relance X
ça devrait marcher
sinon, tu remet l'ancien
c'est a dire
sudo mv /etc/X11xorg.conf.bak /etc/X11/xorg.conf
ok?

V1944 · Le 10/09/2006, à 20:07

Dans la liste de drivers proposés, ne ne trouvent que ati, neomagic et siliconmotion (donc pas radeon).
Alors là, je ne vois pas où ça bloque...

mr_pouit · Le 10/09/2006, à 20:44

Si tu comptes utiliser le pilote libre "ati", il faut que tu supprimes d'abord tous les paquets avec fglrx : xorg-driver-fglrx, fglrx-control....

Enfin, tu suis ce qu'à dit effraie, mais pour le pilote, sélectionne "ati".

V1944 · Le 10/09/2006, à 20:48

Oui, j'ai bien viré les deux paquets en rapport avec fglrx, comme dit dans le tuto
Pour la suite, je te fais confiance.

Edit:
après qu'on m'ait demandé, dans dpkg-reconfigure xserver-xorg, la profondeur en bits de mon écran (enfin vous voyez de l'étape dont je veux parler), je mange ce message d'erreur:

xserver-xorg postinst warning: overwriting possibly-customised configuration
file; backup in /etc/X11/xorg.conf.20060910225048

Et ça m'est déjà arrivé...

Est-ce qu'un aticonfig --initial s'imposerait?

Edit 2:
je ne trouve aticonfig ni dans /usr/bin, ni dans les dépôts... est-ce qu'une pendaison s'imposerait?

Dernière modification par V1944 (Le 10/09/2006, à 21:00)

effraie · Le 10/09/2006, à 21:31

c'est une erreur de ma part
recommence la manip, choisit ati.
ensuite, édite le fichier a ala main et change "ati" en "radeon"

mr_pouit · Le 10/09/2006, à 21:34

V1944 > le programme aticonfig est réservé pour les pilotes propriétaires (fglrx). Pour le pilote libre (ati), tu n'as rien besoin de faire de plus normalement .

xserver-xorg postinst warning: overwriting possibly-customised configuration
file; backup in /etc/X11/xorg.conf.20060910225048

Là, il te prévient juste qu'il va écraser ton xorg.conf (que tu as éventuellement modifié), et qu'il en a fait une sauvegarde sous xorg.conf.20060910225048.

effraie > pas besoin de changer ati en radeon. Le pilote "ati" charge lui même le sous-pilote "radeon" s'il détecte une ATI radeon .

Dernière modification par mr_pouit (Le 10/09/2006, à 21:37)

effraie · Le 10/09/2006, à 21:37

tiens? ça marche pas sous ppc, ça...

V1944 · Le 10/09/2006, à 22:05

Omg, c'était juste une notification? Quand je le relis, c'est vrai que maintenant ça paraît évident

Je vous donnerai des nouvelles après les redémarrage du X

Edit:
Bon, je fais des scores de 60 FPS sur glxgears, quelque chose me dit que c'est pas encore ça...

xorg.conf:

# /etc/X11/xorg.conf (xorg X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the /etc/X11/xorg.conf manual page.
# (Type "man /etc/X11/xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
#   sudo dpkg-reconfigure -phigh xserver-xorg

Section "Files"
        FontPath        "/usr/share/X11/fonts/misc"
        FontPath        "/usr/share/X11/fonts/cyrillic"
        FontPath        "/usr/share/X11/fonts/100dpi/:unscaled"
        FontPath        "/usr/share/X11/fonts/75dpi/:unscaled"
        FontPath        "/usr/share/X11/fonts/Type1"
        FontPath        "/usr/share/X11/fonts/100dpi"
        FontPath        "/usr/share/X11/fonts/75dpi"
        # path to defoma fonts
        FontPath        "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
EndSection

Section "Module"
        Load    "bitmap"
        Load    "ddc"
        Load    "dri"
        Load    "extmod"
        Load    "freetype"
        Load    "glx"
        Load    "int10"
        Load    "type1"
        Load    "vbe"
EndSection

Section "Extensions"
        Option "RENDER" "Enable"
Endsection

Section "InputDevice"
        Identifier      "Generic Keyboard"
        Driver          "kbd"
        Option          "CoreKeyboard"
        Option          "XkbRules"      "xorg"
        Option          "XkbModel"      "pc105"
        Option          "XkbLayout"     "fr"
        Option          "XkbVariant"    "latin1"
EndSection

Section "InputDevice"
        Identifier      "Configured Mouse"
        Driver          "mouse"
        Option          "CorePointer"
        Option          "Device"                "/dev/input/mice"
        Option          "Protocol"              "ExplorerPS/2"
        Option          "ZAxisMapping"          "4 5"
        Option          "Emulate3Buttons"       "true"
EndSection

Section "InputDevice"
  Driver        "wacom"
  Identifier    "stylus"
  Option        "Device"        "/dev/wacom"          # Change to
                                                      # /dev/input/event
                                                      # for USB
  Option        "Type"          "stylus"
  Option        "ForceDevice"   "ISDV4"               # Tablet PC ONLY
EndSection

Section "InputDevice"
  Driver        "wacom"
  Identifier    "eraser"
  Option        "Device"        "/dev/wacom"          # Change to
                                                      # /dev/input/event
                                                      # for USB
  Option        "Type"          "eraser"
  Option        "ForceDevice"   "ISDV4"               # Tablet PC ONLY
EndSection

Section "InputDevice"
  Driver        "wacom"
  Identifier    "cursor"
  Option        "Device"        "/dev/wacom"          # Change to
                                                      # /dev/input/event
                                                      # for USB
  Option        "Type"          "cursor"
  Option        "ForceDevice"   "ISDV4"               # Tablet PC ONLY
EndSection

Section "Device"
        Identifier      "ATI Technologies, Inc. RV280 [Radeon 9200 PRO]"
        Driver          "radeon"
        BusID           "PCI:1:0:0"
        Option          "AGPMode" "4"
        Option         "AGPSize" "64" # default: 8
        Option         "RingSize" "8"
        Option         "BufferSize" "2"
        Option         "EnablePageFlip" "true"
        Option         "EnableDepthMoves" "true"
        Option         "RenderAccel" "true"
EndSection

Section "Monitor"
        Identifier      "E72f+-1"
        Option          "DPMS"
        HorizSync       30-72
        VertRefresh     50-160
EndSection

Section "Screen"
        Identifier      "Default Screen"
        Device          "ATI Technologies, Inc. RV280 [Radeon 9200 PRO]"
        Monitor         "E72f+-1"
        DefaultDepth    24
        SubSection "Display"
                Depth           1
                Modes           "1280x1024" "1280x960" "1152x864" "1024x768" "800x600" "640x480"
        EndSubSection
        SubSection "Display"
                Depth           4
                Modes           "1280x1024" "1280x960" "1152x864" "1024x768" "800x600" "640x480"
        EndSubSection
        SubSection "Display"
                Depth           8
                Modes           "1280x1024" "1280x960" "1152x864" "1024x768" "800x600" "640x480"
        EndSubSection
        SubSection "Display"
                Depth           15
                Modes           "1280x1024" "1280x960" "1152x864" "1024x768" "800x600" "640x480"
        EndSubSection
        SubSection "Display"
                Depth           16
                Modes           "1280x1024" "1280x960" "1152x864" "1024x768" "800x600" "640x480"
        EndSubSection
        SubSection "Display"
                Depth           24
                Modes           "1280x1024" "1280x960" "1152x864" "1024x768" "800x600" "640x480"
        EndSubSection
EndSection

Section "ServerLayout"
        Identifier      "Default Layout"
        Screen          "Default Screen"
        InputDevice     "Generic Keyboard"
        InputDevice     "Configured Mouse"
        InputDevice     "stylus" "SendCoreEvents"
        InputDevice     "cursor" "SendCoreEvents"
        InputDevice     "eraser" "SendCoreEvents"
EndSection

Section "DRI"
        Mode    0666
EndSection

Dernière modification par V1944 (Le 10/09/2006, à 22:35)

effraie · Le 10/09/2006, à 22:48

fectivement, c'est pasça.. creuser donc..
enfin, tu as un xorg.conf sain sur lequel bosser, c'est déja ça.. fait en une copie dans un coin, ça peut servir..

demain, je serais sur l'IRC, si tu veux, et pi d'autres aussi, hein

mr_pouit · Le 10/09/2006, à 22:59

Tu peux copier ici (entre des balises code) les résultats de :
- grep "(WW)" /var/log/Xorg.0.log
- grep "(EE)" /var/log/Xorg.0.log
- dmesg
?

V1944 · Le 10/09/2006, à 23:13

mr_pouit: attention, ca décoiffe

pour
grep "(WW)" /var/log/Xorg.0.log

        (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(WW) The directory "/usr/share/X11/fonts/cyrillic" does not exist.
(WW) Warning, couldn't open module wacom
(WW) RADEON: No matching Device section for instance (BusID PCI:1:0:1) found
(WW) RADEON(0): Failed to detect secondary monitor, MergedFB/Clone mode disabled
(WW) (1280x960,E72f+-1) mode clock 148.5MHz exceeds DDC maximum 110MHz
(WW) (1280x1024,E72f+-1) mode clock 135MHz exceeds DDC maximum 110MHz
(WW) (1280x1024,E72f+-1) mode clock 157.5MHz exceeds DDC maximum 110MHz
(WW) (1600x1200,E72f+-1) mode clock 162MHz exceeds DDC maximum 110MHz
(WW) (1600x1200,E72f+-1) mode clock 175.5MHz exceeds DDC maximum 110MHz
(WW) (1600x1200,E72f+-1) mode clock 189MHz exceeds DDC maximum 110MHz
(WW) (1600x1200,E72f+-1) mode clock 202.5MHz exceeds DDC maximum 110MHz
(WW) (1600x1200,E72f+-1) mode clock 229.5MHz exceeds DDC maximum 110MHz
(WW) (1792x1344,E72f+-1) mode clock 204.8MHz exceeds DDC maximum 110MHz
(WW) (1792x1344,E72f+-1) mode clock 261MHz exceeds DDC maximum 110MHz
(WW) (1856x1392,E72f+-1) mode clock 218.3MHz exceeds DDC maximum 110MHz
(WW) (1856x1392,E72f+-1) mode clock 288MHz exceeds DDC maximum 110MHz
(WW) (1920x1440,E72f+-1) mode clock 234MHz exceeds DDC maximum 110MHz
(WW) (1920x1440,E72f+-1) mode clock 297MHz exceeds DDC maximum 110MHz
(WW) (1152x864,E72f+-1) mode clock 121.5MHz exceeds DDC maximum 110MHz
(WW) (1400x1050,E72f+-1) mode clock 122MHz exceeds DDC maximum 110MHz
(WW) (1400x1050,E72f+-1) mode clock 151MHz exceeds DDC maximum 110MHz
(WW) (1400x1050,E72f+-1) mode clock 155.8MHz exceeds DDC maximum 110MHz
(WW) (1400x1050,E72f+-1) mode clock 184MHz exceeds DDC maximum 110MHz
(WW) (1680x1050,E72f+-1) mode clock 147.14MHz exceeds DDC maximum 110MHz
(WW) (1680x1050,E72f+-1) mode clock 146.25MHz exceeds DDC maximum 110MHz
(WW) (1680x1050,E72f+-1) mode clock 214.51MHz exceeds DDC maximum 110MHz
(WW) (1920x1200,E72f+-1) mode clock 193.16MHz exceeds DDC maximum 110MHz
(WW) (1920x1200,E72f+-1) mode clock 230MHz exceeds DDC maximum 110MHz
(WW) (1920x1440,E72f+-1) mode clock 341.35MHz exceeds DDC maximum 110MHz
(WW) (2048x1536,E72f+-1) mode clock 266.95MHz exceeds DDC maximum 110MHz
(WW) (2048x1536,E72f+-1) mode clock 340.48MHz exceeds DDC maximum 110MHz
(WW) (2048x1536,E72f+-1) mode clock 388.04MHz exceeds DDC maximum 110MHz
(WW) RADEON(0): Direct rendering disabled

pour
grep "(EE)" /var/log/Xorg.0.log

        (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(EE) Failed to load module "wacom" (module does not exist, 0)
(EE) RADEON(0): [dri] RADEONDRIGetVersion failed to open the DRM
(EE) No Input driver matching `wacom'
(EE) No Input driver matching `wacom'
(EE) No Input driver matching `wacom'

pour
dmesg

[17179569.184000] Linux version 2.6.15-26-k7 (buildd@terranova) (gcc version 4.0.3 (Ubuntu 4.0.3-1ubuntu5)) #1 SMP PREEMPT Thu Aug 3 03:40:32 UTC 2006
[17179569.184000] BIOS-provided physical RAM map:
[17179569.184000]  BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[17179569.184000]  BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[17179569.184000]  BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
[17179569.184000]  BIOS-e820: 0000000000100000 - 000000000ff30000 (usable)
[17179569.184000]  BIOS-e820: 000000000ff30000 - 000000000ff40000 (ACPI data)
[17179569.184000]  BIOS-e820: 000000000ff40000 - 000000000fff0000 (ACPI NVS)
[17179569.184000]  BIOS-e820: 000000000fff0000 - 0000000010000000 (reserved)
[17179569.184000]  BIOS-e820: 00000000ff780000 - 0000000100000000 (reserved)
[17179569.184000] 0MB HIGHMEM available.
[17179569.184000] 255MB LOWMEM available.
[17179569.184000] found SMP MP-table at 000ff780
[17179569.184000] On node 0 totalpages: 65328
[17179569.184000]   DMA zone: 4096 pages, LIFO batch:0
[17179569.184000]   DMA32 zone: 0 pages, LIFO batch:0
[17179569.184000]   Normal zone: 61232 pages, LIFO batch:15
[17179569.184000]   HighMem zone: 0 pages, LIFO batch:0
[17179569.184000] DMI 2.3 present.
[17179569.184000] ACPI: RSDP (v000 ACPIAM                                ) @ 0x000fa950
[17179569.184000] ACPI: RSDT (v001 A M I  OEMRSDT  0x08000403 MSFT 0x00000097) @ 0x0ff30000
[17179569.184000] ACPI: FADT (v001 A M I  OEMFACP  0x08000403 MSFT 0x00000097) @ 0x0ff30200
[17179569.184000] ACPI: MADT (v001 A M I  OEMAPIC  0x08000403 MSFT 0x00000097) @ 0x0ff30390
[17179569.184000] ACPI: DSDT (v001  A0023 A0023010 0x00000010 MSFT 0x0100000d) @ 0x00000000
[17179569.184000] ACPI: PM-Timer IO Port: 0x808
[17179569.184000] ACPI: Local APIC address 0xfee00000
[17179569.184000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[17179569.184000] Processor #0 15:12 APIC version 16
[17179569.184000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[17179569.184000] IOAPIC[0]: apic_id 1, version 3, address 0xfec00000, GSI 0-23
[17179569.184000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[17179569.184000] ACPI: IRQ0 used by override.
[17179569.184000] ACPI: IRQ2 used by override.
[17179569.184000] ACPI: IRQ9 used by override.
[17179569.184000] Enabling APIC mode:  Flat.  Using 1 I/O APICs
[17179569.184000] Using ACPI (MADT) for SMP configuration information
[17179569.184000] Allocating PCI resources starting at 20000000 (gap: 10000000:ef780000)
[17179569.184000] Built 1 zonelists
[17179569.184000] Kernel command line: root=/dev/hdb1 ro quiet splash
[17179569.184000] mapped APIC to ffffd000 (fee00000)
[17179569.184000] mapped IOAPIC to ffffc000 (fec00000)
[17179569.184000] Initializing CPU#0
[17179569.184000] PID hash table entries: 1024 (order: 10, 16384 bytes)
[17179569.184000] Detected 1800.374 MHz processor.
[17179569.184000] Using pmtmr for high-res timesource
[17179569.184000] Console: colour VGA+ 80x25
[17179569.320000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[17179569.320000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[17179569.324000] Memory: 247532k/261312k available (2103k kernel code, 13204k reserved, 600k data, 332k init, 0k highmem)
[17179569.324000] Checking if this processor honours the WP bit even in supervisor mode... Ok.
[17179569.404000] Calibrating delay using timer specific routine.. 3604.99 BogoMIPS (lpj=7209992)
[17179569.404000] Security Framework v1.0.0 initialized
[17179569.404000] SELinux:  Disabled at boot.
[17179569.404000] Mount-cache hash table entries: 512
[17179569.404000] CPU: After generic identify, caps: 078bfbff c1d3fbff 00000000 00000000 00000000 00000000 00000000
[17179569.404000] CPU: After vendor identify, caps: 078bfbff c1d3fbff 00000000 00000000 00000000 00000000 00000000
[17179569.404000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[17179569.404000] CPU: L2 Cache: 256K (64 bytes/line)
[17179569.404000] CPU: After all inits, caps: 078bfbff c1d3fbff 00000000 00000410 00000000 00000000 00000000
[17179569.404000] mtrr: v2.0 (20020519)
[17179569.404000] Enabling fast FPU save and restore... done.
[17179569.404000] Enabling unmasked SIMD FPU exception support... done.
[17179569.404000] Checking 'hlt' instruction... OK.
[17179569.420000] SMP alternatives: switching to UP code
[17179569.420000] checking if image is initramfs... it is
[17179569.980000] Freeing initrd memory: 6762k freed
[17179569.988000] ACPI: Looking for DSDT ... not found!
[17179569.988000] CPU0: AMD Sempron(tm) Processor 3100+ stepping 00
[17179569.988000] Total of 1 processors activated (3604.99 BogoMIPS).
[17179569.988000] ENABLING IO-APIC IRQs
[17179569.988000] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
[17179570.136000] Brought up 1 CPUs
[17179570.136000] NET: Registered protocol family 16
[17179570.136000] EISA bus registered
[17179570.136000] ACPI: bus type pci registered
[17179570.136000] PCI: PCI BIOS revision 2.10 entry at 0xf0031, last bus=1
[17179570.136000] PCI: Using configuration type 1
[17179570.136000] ACPI: Subsystem revision 20051216
[17179570.140000] ACPI: Interpreter enabled
[17179570.140000] ACPI: Using IOAPIC for interrupt routing
[17179570.140000] ACPI: PCI Root Bridge [PCI0] (0000:00)
[17179570.140000] PCI: Probing PCI hardware (bus 00)
[17179570.144000] Boot video device is 0000:01:00.0
[17179570.144000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[17179570.156000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
[17179570.160000] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 10 *11 14 15)
[17179570.160000] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 *10 11 14 15)
[17179570.160000] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 7 10 11 14 15)
[17179570.160000] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 10 11 14 15) *0, disabled.
[17179570.160000] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 10 11 14 15) *0, disabled.
[17179570.160000] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 10 11 14 15) *0, disabled.
[17179570.164000] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 10 11 14 15) *0, disabled.
[17179570.164000] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 10 11 14 15) *0, disabled.
[17179570.164000] Linux Plug and Play Support v0.97 (c) Adam Belay
[17179570.164000] pnp: PnP ACPI init
[17179570.168000] pnp: PnP ACPI: found 13 devices
[17179570.168000] PnPBIOS: Disabled by ACPI PNP
[17179570.168000] PCI: Using ACPI for IRQ routing
[17179570.168000] PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
[17179570.172000] PCI: Bridge: 0000:00:01.0
[17179570.172000]   IO window: e000-efff
[17179570.172000]   MEM window: fbd00000-fbffffff
[17179570.172000]   PREFETCH window: e8000000-faffffff
[17179570.172000] PCI: Setting latency timer of device 0000:00:01.0 to 64
[17179570.172000] audit: initializing netlink socket (disabled)
[17179570.172000] audit(1157926477.168:1): initialized
[17179570.172000] VFS: Disk quotas dquot_6.5.1
[17179570.172000] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[17179570.172000] Initializing Cryptographic API
[17179570.172000] io scheduler noop registered
[17179570.172000] io scheduler anticipatory registered
[17179570.172000] io scheduler deadline registered
[17179570.172000] io scheduler cfq registered
[17179570.172000] isapnp: Scanning for PnP cards...
[17179570.528000] isapnp: No Plug & Play device found
[17179570.540000] Real Time Clock Driver v1.12
[17179570.540000] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
[17179570.540000] serio: i8042 AUX port at 0x60,0x64 irq 12
[17179570.540000] serio: i8042 KBD port at 0x60,0x64 irq 1
[17179570.540000] Serial: 8250/16550 driver $Revision: 1.90 $ 48 ports, IRQ sharing enabled
[17179570.540000] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[17179570.540000] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[17179570.540000] 00:0a: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[17179570.540000] 00:0b: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[17179570.540000] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[17179570.540000] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[17179570.540000] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[17179570.540000] mice: PS/2 mouse device common for all mice
[17179570.540000] EISA: Probing bus 0 at eisa.0
[17179570.540000] EISA: Detected 0 cards.
[17179570.544000] NET: Registered protocol family 2
[17179570.564000] input: AT Translated Set 2 keyboard as /class/input/input0
[17179570.584000] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
[17179570.584000] TCP established hash table entries: 16384 (order: 5, 196608 bytes)
[17179570.584000] TCP bind hash table entries: 16384 (order: 5, 196608 bytes)
[17179570.584000] TCP: Hash tables configured (established 16384 bind 16384)
[17179570.584000] TCP reno registered
[17179570.584000] TCP bic registered
[17179570.584000] NET: Registered protocol family 1
[17179570.584000] NET: Registered protocol family 8
[17179570.584000] NET: Registered protocol family 20
[17179570.584000] Using IPI No-Shortcut mode
[17179570.584000] ACPI wakeup devices:
[17179570.584000] PCI0 PS2K PS2M UAR1 UAR2 AC97 USB1 USB2 USB3 USB4 EHCI ILAN PWRB
[17179570.584000] ACPI: (supports S0 S1 S3 S4 S5)
[17179570.584000] Freeing unused kernel memory: 332k freed
[17179570.628000] vga16fb: initializing
[17179570.628000] vga16fb: mapped to 0xc00a0000
[17179570.732000] Console: switching to colour frame buffer device 80x25
[17179570.732000] fb0: VGA16 VGA frame buffer device
[17179571.804000] Capability LSM initialized
[17179572.456000] SCSI subsystem initialized
[17179572.460000] ACPI: bus type scsi registered
[17179572.460000] libata version 1.20 loaded.
[17179572.460000] sata_via 0000:00:0f.0: version 1.1
[17179572.460000] ACPI: PCI Interrupt 0000:00:0f.0[b] -> GSI 20 (level, low) -> IRQ 169
[17179572.460000] sata_via 0000:00:0f.0: routed to hard irq line 10
[17179572.460000] ata1: SATA max UDMA/133 cmd 0xD400 ctl 0xD002 bmdma 0xC000 irq 169
[17179572.460000] ata2: SATA max UDMA/133 cmd 0xC800 ctl 0xC402 bmdma 0xC008 irq 169
[17179573.684000] scsi0 : sata_via
[17179574.908000] scsi1 : sata_via
[17179574.932000] VP_IDE: IDE controller at PCI slot 0000:00:0f.1
[17179574.932000] ACPI: PCI Interrupt 0000:00:0f.1[A] -> GSI 20 (level, low) -> IRQ 169
[17179574.932000] PCI: VIA IRQ fixup for 0000:00:0f.1, from 255 to 9
[17179574.932000] VP_IDE: chipset revision 6
[17179574.932000] VP_IDE: not 100% native mode: will probe irqs later
[17179574.932000] VP_IDE: VIA vt8237 (rev 00) IDE UDMA133 controller on pci0000:00:0f.1
[17179574.932000]     ide0: BM-DMA at 0xfc00-0xfc07, BIOS settings: hda:DMA, hdb:DMA
[17179574.932000]     ide1: BM-DMA at 0xfc08-0xfc0f, BIOS settings: hdc:DMA, hdd:pio
[17179574.932000] Probing IDE interface ide0...
[17179575.360000] hda: HDS722512VLAT20, ATA DISK drive
[17179575.644000] hdb: WDC WD800JB-00JJC0, ATA DISK drive
[17179575.704000] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[17179575.704000] Probing IDE interface ide1...
[17179576.580000] hdc: TSSTcorpCD/DVDW SH-W162C, ATAPI CD/DVD-ROM drive
[17179577.256000] ide1 at 0x170-0x177,0x376 on irq 15
[17179577.260000] hda: max request size: 1024KiB
[17179577.276000] hda: 241254720 sectors (123522 MB) w/1794KiB Cache, CHS=16383/255/63, UDMA(100)
[17179577.276000] hda: cache flushes supported
[17179577.276000]  hda: hda1 hda2 hda3 hda4
[17179577.276000] hdb: max request size: 128KiB
[17179577.292000] hdb: 156301488 sectors (80026 MB) w/8192KiB Cache, CHS=65535/16/63, UDMA(100)
[17179577.292000] hdb: cache flushes supported
[17179577.292000]  hdb: hdb1 hdb2 < hdb5 >
[17179577.336000] hdc: ATAPI 48X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache, UDMA(33)
[17179577.336000] Uniform CD-ROM driver Revision: 3.20
[17179578.316000] ieee1394: Initialized config rom entry `ip1394'
[17179578.320000] ohci1394: $Rev: 1313 $ Ben Collins <bcollins@debian.org>
[17179578.320000] ACPI: PCI Interrupt 0000:00:07.0[A] -> GSI 16 (level, low) -> IRQ 177
[17179578.372000] ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[177]  MMIO=[fbc00000-fbc007ff]  Max Packet=[2048]
[17179578.388000] usbcore: registered new driver usbfs
[17179578.388000] usbcore: registered new driver hub
[17179578.392000] USB Universal Host Controller Interface driver v2.3
[17179578.472000] ACPI: PCI Interrupt 0000:00:10.0[A] -> GSI 21 (level, low) -> IRQ 185
[17179578.472000] PCI: VIA IRQ fixup for 0000:00:10.0, from 11 to 9
[17179578.472000] uhci_hcd 0000:00:10.0: UHCI Host Controller
[17179578.476000] uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 1
[17179578.476000] uhci_hcd 0000:00:10.0: irq 185, io base 0x0000a400
[17179578.476000] hub 1-0:1.0: USB hub found
[17179578.476000] hub 1-0:1.0: 2 ports detected
[17179578.584000] ACPI: PCI Interrupt 0000:00:10.1[A] -> GSI 21 (level, low) -> IRQ 185
[17179578.584000] PCI: VIA IRQ fixup for 0000:00:10.1, from 11 to 9
[17179578.584000] uhci_hcd 0000:00:10.1: UHCI Host Controller
[17179578.584000] uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 2
[17179578.584000] uhci_hcd 0000:00:10.1: irq 185, io base 0x0000a800
[17179578.584000] hub 2-0:1.0: USB hub found
[17179578.584000] hub 2-0:1.0: 2 ports detected
[17179578.692000] ACPI: PCI Interrupt 0000:00:10.2[b] -> GSI 21 (level, low) -> IRQ 185
[17179578.692000] PCI: VIA IRQ fixup for 0000:00:10.2, from 10 to 9
[17179578.692000] uhci_hcd 0000:00:10.2: UHCI Host Controller
[17179578.692000] uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 3
[17179578.692000] uhci_hcd 0000:00:10.2: irq 185, io base 0x0000b000
[17179578.692000] hub 3-0:1.0: USB hub found
[17179578.692000] hub 3-0:1.0: 2 ports detected
[17179578.800000] ACPI: PCI Interrupt 0000:00:10.3[b] -> GSI 21 (level, low) -> IRQ 185
[17179578.800000] PCI: VIA IRQ fixup for 0000:00:10.3, from 10 to 9
[17179578.800000] uhci_hcd 0000:00:10.3: UHCI Host Controller
[17179578.800000] uhci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 4
[17179578.800000] uhci_hcd 0000:00:10.3: irq 185, io base 0x0000b400
[17179578.800000] hub 4-0:1.0: USB hub found
[17179578.800000] hub 4-0:1.0: 2 ports detected
[17179578.908000] ACPI: PCI Interrupt 0000:00:10.4[C] -> GSI 21 (level, low) -> IRQ 185
[17179578.908000] ehci_hcd 0000:00:10.4: EHCI Host Controller
[17179578.908000] ehci_hcd 0000:00:10.4: new USB bus registered, assigned bus number 5
[17179578.908000] ehci_hcd 0000:00:10.4: irq 185, io mem 0xfba00000
[17179578.908000] ehci_hcd 0000:00:10.4: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[17179578.908000] hub 5-0:1.0: USB hub found
[17179578.908000] hub 5-0:1.0: 8 ports detected
[17179579.132000] Attempting manual resume
[17179579.160000] EXT3-fs: mounted filesystem with ordered data mode.
[17179579.176000] kjournald starting.  Commit interval 5 seconds
[17179579.752000] ieee1394: Host added: ID:BUS[0-00:1023]  GUID[00e0180000af7427]
[17179580.048000] usb 3-2: new low speed USB device using uhci_hcd and address 2
[17179589.208000] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[17179589.212000] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[17179590.048000] Floppy drive(s): fd0 is 1.44M
[17179590.072000] FDC 0 is a post-1991 82077
[17179590.112000] Linux agpgart interface v0.101 (c) Dave Jones
[17179590.120000] usbcore: registered new driver hiddev
[17179590.144000] input: USB Joystick      USB Joystick      as /class/input/input1
[17179590.144000] input: USB HID v1.10 Joystick [USB Joystick      USB Joystick     ] on usb-0000:00:10.2-2
[17179590.144000] usbcore: registered new driver usbhid
[17179590.144000] drivers/usb/input/hid-core.c: v2.6:USB HID core driver
[17179590.232000] agpgart: Detected AGP bridge 0
[17179590.236000] agpgart: AGP aperture is 128M @ 0xe0000000
[17179590.240000] parport: PnPBIOS parport detected.
[17179590.240000] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,EPP,ECP,DMA]
[17179590.312000] input: PC Speaker as /class/input/input2
[17179590.416000] ACPI: PCI Interrupt 0000:00:11.5[C] -> GSI 22 (level, low) -> IRQ 193
[17179590.416000] PCI: Setting latency timer of device 0000:00:11.5 to 64
[17179590.460000] via-rhine.c:v1.10-LK1.2.0-2.6 June-10-2004 Written by Donald Becker
[17179590.740000] input: ImPS/2 Generic Wheel Mouse as /class/input/input3
[17179590.756000] ts: Compaq touchscreen protocol output
[17179590.948000] ACPI: PCI Interrupt 0000:00:12.0[A] -> GSI 23 (level, low) -> IRQ 201
[17179590.948000] eth0: VIA Rhine II at 0x19800, 00:11:2f:c0:d2:d3, IRQ 201.
[17179590.948000] eth0: MII PHY found at address 1, status 0x786d advertising 01e1 Link 41e1.
[17179591.344000] Intel ISA PCIC probe: not found.
[17179591.496000] fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel.
[17179591.500000] [fglrx] Maximum main memory to use for locked dma buffers: 197 MBytes.
[17179591.500000] [fglrx] module loaded - fglrx 8.25.18 [May 18 2006] on minor 0
[17179591.560000] radeon: Unknown symbol drm_open
[17179591.560000] radeon: Unknown symbol drm_fasync
[17179591.560000] radeon: Unknown symbol drm_poll
[17179591.560000] radeon: Unknown symbol drm_get_resource_len
[17179591.560000] radeon: Unknown symbol drm_core_get_reg_ofs
[17179591.560000] radeon: Unknown symbol drm_irq_uninstall
[17179591.560000] radeon: Unknown symbol drm_ioctl
[17179591.560000] radeon: Unknown symbol drm_exit
[17179591.560000] radeon: Unknown symbol drm_debug
[17179591.560000] radeon: Unknown symbol drm_core_get_map_ofs
[17179591.560000] radeon: Unknown symbol drm_init
[17179591.560000] radeon: Unknown symbol drm_addmap
[17179591.560000] radeon: Unknown symbol drm_get_resource_start
[17179591.560000] radeon: Unknown symbol drm_vbl_send_signals
[17179591.560000] radeon: Unknown symbol drm_ati_pcigart_init
[17179591.560000] radeon: Unknown symbol drm_mmap
[17179591.560000] radeon: Unknown symbol drm_order
[17179591.560000] radeon: Unknown symbol drm_ati_pcigart_cleanup
[17179591.560000] radeon: Unknown symbol drm_core_reclaim_buffers
[17179591.560000] radeon: Unknown symbol drm_release
[17179591.580000] lp0: using parport0 (interrupt-driven).
[17179591.632000] sbp2: $Rev: 1306 $ Ben Collins <bcollins@debian.org>
[17179591.632000] ieee1394: sbp2: Driver forced to serialize I/O (serialize_io=1)
[17179591.632000] ieee1394: sbp2: Try serialize_io=0 for better performance
[17179591.688000] Adding 746980k swap on /dev/hdb5.  Priority:-1 extents:1 across:746980k
[17179591.832000] EXT3 FS on hdb1, internal journal
[17179592.016000] md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
[17179592.016000] md: bitmap version 4.39
[17179592.536000] device-mapper: 4.4.0-ioctl (2005-01-12) initialised: dm-devel@redhat.com
[17179593.316000] cdrom: open failed.
[17179593.916000] NTFS driver 2.1.25 [Flags: R/O MODULE].
[17179593.972000] NTFS volume version 3.1.
[17179595.528000] ACPI: Power Button (FF) [PWRF]
[17179595.528000] ACPI: Power Button (CM) [PWRB]
[17179595.616000] ibm_acpi: ec object not found
[17179595.644000] pcc_acpi: loading...
[17179596.180000] powernow-k8: Found 1 AMD Athlon 64 / Opteron processors (version 1.50.4)
[17179596.180000] powernow-k8:    0 : fid 0x2 (1000 MHz), vid 0x12 (1100 mV)
[17179596.180000] powernow-k8:    1 : fid 0xa (1800 MHz), vid 0x6 (1400 mV)
[17179596.180000] cpu_init done, current fid 0xa, vid 0x4
[17179596.184000] powernow-k8: ph2 null fid transition 0xa
[17179601.564000] CSLIP: code copyright 1989 Regents of the University of California
[17179601.660000] PPP generic driver version 2.4.2
[17179601.664000] NET: Registered protocol family 24
[17179602.084000] NET: Registered protocol family 17
[17179602.120000] NET: Registered protocol family 10
[17179602.120000] lo: Disabled Privacy Extensions
[17179602.120000] IPv6 over IPv4 tunneling driver
[17179602.608000] ppdev: user-space parallel port driver
[17179604.672000] apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
[17179604.672000] apm: overridden by ACPI.
[17179611.876000] Bluetooth: Core ver 2.8
[17179611.876000] NET: Registered protocol family 31
[17179611.876000] Bluetooth: HCI device and connection manager initialized
[17179611.876000] Bluetooth: HCI socket layer initialized
[17179612.092000] Bluetooth: L2CAP ver 2.8
[17179612.092000] Bluetooth: L2CAP socket layer initialized
[17179612.168000] Bluetooth: RFCOMM socket layer initialized
[17179612.168000] Bluetooth: RFCOMM TTY layer initialized
[17179612.168000] Bluetooth: RFCOMM ver 1.7
[17179763.088000] eth0: link up, 100Mbps, full-duplex, lpa 0x41E1
[17179773.508000] eth0: no IPv6 routers present
[17179776.324000] ip_tables: (C) 2000-2002 Netfilter core team

mr_pouit · Le 10/09/2006, à 23:59

[17179591.496000] fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel.
[17179591.500000] [fglrx] Maximum main memory to use for locked dma buffers: 197 MBytes.
[17179591.500000] [fglrx] module loaded - fglrx 8.25.18 [May 18 2006] on minor 0

Peux-tu supprimer les paquets linux-restricted-modules-*, et supprimer "fglrx" de ton /etc/modules ? car là il charge quand même le module "fglrx", et c'est ça qui doit tout faire rater

V1944 · Le 11/09/2006, à 13:15

C'était effectivement ça
Mes scores à glxgears varient de 600 à 1000 FPS maintenant.

Merci beaucoup mr_pouit et effraie.

Dernière modification par V1944 (Le 11/09/2006, à 19:58)

Ubuntu-fr

Navigation

Liens de recherche

Annonce

#1 Le 09/09/2006, à 20:18

[Résolu] Installer l'accélération 3D: je donne ma langue au chat

#2 Le 09/09/2006, à 20:35

Re : [Résolu] Installer l'accélération 3D: je donne ma langue au chat

#3 Le 10/09/2006, à 12:14

Re : [Résolu] Installer l'accélération 3D: je donne ma langue au chat

#4 Le 10/09/2006, à 20:00

Re : [Résolu] Installer l'accélération 3D: je donne ma langue au chat

#5 Le 10/09/2006, à 20:07

Re : [Résolu] Installer l'accélération 3D: je donne ma langue au chat

#6 Le 10/09/2006, à 20:44

Re : [Résolu] Installer l'accélération 3D: je donne ma langue au chat

#7 Le 10/09/2006, à 20:48

Re : [Résolu] Installer l'accélération 3D: je donne ma langue au chat

#8 Le 10/09/2006, à 21:31

Re : [Résolu] Installer l'accélération 3D: je donne ma langue au chat

#9 Le 10/09/2006, à 21:34

Re : [Résolu] Installer l'accélération 3D: je donne ma langue au chat

#10 Le 10/09/2006, à 21:37

Re : [Résolu] Installer l'accélération 3D: je donne ma langue au chat

#11 Le 10/09/2006, à 22:05

Re : [Résolu] Installer l'accélération 3D: je donne ma langue au chat

#12 Le 10/09/2006, à 22:48

Re : [Résolu] Installer l'accélération 3D: je donne ma langue au chat

#13 Le 10/09/2006, à 22:59

Re : [Résolu] Installer l'accélération 3D: je donne ma langue au chat

#14 Le 10/09/2006, à 23:13

Re : [Résolu] Installer l'accélération 3D: je donne ma langue au chat

#15 Le 10/09/2006, à 23:59

Re : [Résolu] Installer l'accélération 3D: je donne ma langue au chat

#16 Le 11/09/2006, à 13:15

Re : [Résolu] Installer l'accélération 3D: je donne ma langue au chat

Pied de page des forums