#1 Le 20/09/2006, à 09:55
- LudoRA
Écran "rayé" sur portable Asus A6
Bonjour,
J'ai deux PC portables indentiques. Un sur Debian Etch (noyau 2.6.17-2-k7), l'autre sur Kubuntu (noyau 2.6.15-27-k7).
D'un point de vu graphique, sur le premier, tout va bien.
Par contre, celui sur Kubuntu affiche des rayures verticales de la gauche de l'écran jusqu'au 3/4 environ.
Voici le xorg.conf du premier:
# XF86Config-4 (XFree86 X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the XF86Config-4 manual page.
# (Type "man XF86Config-4" at the shell prompt.)
#
# This file is automatically updated on xserver-xfree86 package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xfree86
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following commands as root:
#
# cp /etc/X11/XF86Config-4 /etc/X11/XF86Config-4.custom
# md5sum /etc/X11/XF86Config-4 >/var/lib/xfree86/XF86Config-4.md5sum
# dpkg-reconfigure xserver-xfree86
Section "Files"
FontPath "unix/:7100" # local font server
# if the local font server has problems, we can fall back on these
FontPath "/usr/share/fonts/X11/misc"
FontPath "/usr/lib/X11/fonts/misc"
FontPath "/usr/share/fonts/X11/cyrillic"
FontPath "/usr/lib/X11/fonts/cyrillic"
FontPath "/usr/lib/X11/fonts/100dpi/:unscaled"
FontPath "/usr/lib/X11/fonts/75dpi/:unscaled"
FontPath "/usr/share/fonts/X11/Type1"
FontPath "/usr/lib/X11/fonts/Type1"
FontPath "/usr/share/fonts/X11/CID"
FontPath "/usr/lib/X11/fonts/CID"
FontPath "/usr/lib/X11/fonts/Speedo"
FontPath "/usr/share/fonts/X11/100dpi"
FontPath "/usr/lib/X11/fonts/100dpi"
FontPath "/usr/share/fonts/X11/75dpi"
FontPath "/usr/lib/X11/fonts/75dpi"
EndSection
Section "Module"
Load "bitmap"
Load "dbe"
Load "ddc"
Load "dri"
Load "extmod"
Load "freetype"
Load "glx"
Load "int10"
Load "record"
Load "synaptics"
Load "type1"
Load "vbe"
Load "xtt"
EndSection
Section "InputDevice"
Identifier "Generic Keyboard"
Driver "keyboard"
Option "CoreKeyboard"
Option "XkbRules" "xfree86"
Option "XkbModel" "pc105"
Option "XkbLayout" "fr"
EndSection
#Section "InputDevice"
# Identifier "Configured Mouse"
# Driver "mouse"
# Option "CorePointer"
# Option "Device" "/dev/psaux"
# Option "Protocol" "ExplorerPS/2"
# Option "Emulate3Buttons" "true"
# Option "ZAxisMapping" "4 5"
#EndSection
Section "InputDevice"
Identifier "Touchpad"
Driver "synaptics"
Option "CorePointer"
Option "Device" "/dev/psaux"
Option "Protocol" "auto-dev"
Option "Emulate3Buttons" "true"
Option "ZAxisMapping" "4 5"
EndSection
Section "Device"
Identifier "Carte vidéo générique"
Driver "sis"
EndSection
Section "Monitor"
Identifier "Écran générique"
HorizSync 28-50
VertRefresh 43-75
Option "DPMS"
EndSection
Section "Screen"
Identifier "Default Screen"
Device "Carte vidéo générique"
Monitor "Écran générique"
DefaultDepth 24
SubSection "Display"
Depth 1
Modes "1280x800" "1152x864" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 4
Modes "1280x800" "1152x864" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 8
Modes "1280x800" "1152x864" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 15
Modes "1280x800" "1152x864" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 16
Modes "1280x800" "1152x864" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 24
Modes "1280x800" "1152x864" "1024x768" "800x600" "640x480"
EndSubSection
EndSection
Section "ServerLayout"
Identifier "Default Layout"
Screen "Default Screen"
InputDevice "Generic Keyboard"
# InputDevice "Configured Mouse"
InputDevice "Touchpad"
EndSection
#Section "DRI"
# Mode 0666
#EndSection
Et voici celui du second (Kubuntu):
# /etc/X11/xorg.conf (xorg X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the /etc/X11/xorg.conf manual page.
# (Type "man /etc/X11/xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
# sudo dpkg-reconfigure -phigh xserver-xorg
Section "Files"
FontPath "/usr/share/X11/fonts/misc"
FontPath "/usr/share/X11/fonts/cyrillic"
FontPath "/usr/share/X11/fonts/100dpi/:unscaled"
FontPath "/usr/share/X11/fonts/75dpi/:unscaled"
FontPath "/usr/share/X11/fonts/Type1"
FontPath "/usr/share/X11/fonts/100dpi"
FontPath "/usr/share/X11/fonts/75dpi"
# path to defoma fonts
FontPath "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
EndSection
Section "Module"
Load "bitmap"
Load "dbe"
Load "ddc"
Load "dri"
Load "extmod"
Load "freetype"
Load "glx"
Load "int10"
Load "record"
Load "type1"
Load "v4l"
Load "vbe"
EndSection
Section "InputDevice"
Identifier "Generic Keyboard"
Driver "kbd"
Option "CoreKeyboard"
Option "XkbRules" "xorg"
Option "XkbModel" "pc105"
Option "XkbLayout" "fr"
EndSection
Section "InputDevice"
Identifier "Configured Mouse"
Driver "mouse"
Option "CorePointer"
Option "Device" "/dev/input/mice"
Option "Protocol" "ExplorerPS/2"
Option "ZAxisMapping" "4 5"
Option "Emulate3Buttons" "true"
EndSection
Section "InputDevice"
Identifier "Synaptics Touchpad"
Driver "synaptics"
Option "SendCoreEvents" "true"
Option "Device" "/dev/psaux"
Option "Protocol" "auto-dev"
Option "HorizScrollDelta" "0"
EndSection
Section "InputDevice"
Driver "wacom"
Identifier "stylus"
Option "Device" "/dev/wacom" # Change to
# /dev/input/event
# for USB
Option "Type" "stylus"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection
Section "InputDevice"
Driver "wacom"
Identifier "eraser"
Option "Device" "/dev/wacom" # Change to
# /dev/input/event
# for USB
Option "Type" "eraser"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection
Section "InputDevice"
Driver "wacom"
Identifier "cursor"
Option "Device" "/dev/wacom" # Change to
# /dev/input/event
# for USB
Option "Type" "cursor"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection
Section "Device"
Identifier "Carte vidéo générique"
Driver "sis"
BusID "PCI:1:0:0"
EndSection
Section "Monitor"
Identifier "àcran générique"
Option "DPMS"
HorizSync 28-64
VertRefresh 43-60
EndSection
Section "Screen"
Identifier "Default Screen"
Device "Carte vidéo générique"
Monitor "àcran générique"
DefaultDepth 24
SubSection "Display"
Depth 1
Modes "1280x1024" "1280x960" "1280x854" "1280x800" "1280x768" "1200x800" "1152x864" "1152x768" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 4
Modes "1280x1024" "1280x960" "1280x854" "1280x800" "1280x768" "1200x800" "1152x864" "1152x768" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 8
Modes "1280x1024" "1280x960" "1280x854" "1280x800" "1280x768" "1200x800" "1152x864" "1152x768" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 15
Modes "1280x1024" "1280x960" "1280x854" "1280x800" "1280x768" "1200x800" "1152x864" "1152x768" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 16
Modes "1280x1024" "1280x960" "1280x854" "1280x800" "1280x768" "1200x800" "1152x864" "1152x768" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 24
Modes "1280x1024" "1280x960" "1280x854" "1280x800" "1280x768" "1200x800" "1152x864" "1152x768" "1024x768" "800x600" "640x480"
EndSubSection
EndSection
Section "ServerLayout"
Identifier "Default Layout"
Screen "Default Screen"
InputDevice "Generic Keyboard"
InputDevice "Configured Mouse"
InputDevice "stylus" "SendCoreEvents"
InputDevice "cursor" "SendCoreEvents"
InputDevice "eraser" "SendCoreEvents"
InputDevice "Synaptics Touchpad"
EndSection
Section "DRI"
Mode 0666
EndSection
Et pour le matériel:
lspci |grep -i display
01:00.0 VGA compatible controller: Silicon Integrated Systems [SiS] 661/741/760/761 PCI/AGP VGA Display Adapter
Voilà. Si vous avez une idée.
Hors ligne
#2 Le 20/09/2006, à 10:06
- loloemr
Re : Écran "rayé" sur portable Asus A6
Salut,
il y a deux différences : dans la section Driver PCI:1:0:0:0 et les résolutions possibles.
Donc cela peut venir de là. Essaie de virer les résolutions supplémentaires ici
SubSection "Display"
Depth 24
Modes "1280x800" "1280x768" "1200x800" "1152x864" "1152x768" "1024x768" "800x600" "640x480"
EndSubSection
L'open source est garant de notre indépendance technologique, permet de créer des emplois locaux et véhiculent deux idées fondamentales : la transparence de l'information et la supériorité de la collaboration sur la concurrence ... GNU/Linux c'est bon mangez-en !!
Hors ligne
#3 Le 20/09/2006, à 12:50
- LudoRA
Re : Écran "rayé" sur portable Asus A6
OK. C'est fait.
A près redémarrage du serveur X, même problème.
Précision, avec le LiveCD d'installation, l'écran n'est pas rayé (mais est en vga au lieu de sis). Ce n'est donc pas un problème d'écran ou de carte graphique defectueuse.
???
Hors ligne
#4 Le 20/09/2006, à 13:19
- Zergy
Re : Écran "rayé" sur portable Asus A6
Et en copiant-collant le xorg.conf de Debian sur le Kubuntu ça n'arrange pas le problème ?
C'est peut être le pilote Sis du Kubuntu qui est défectueux.
Hors ligne
#5 Le 20/09/2006, à 13:41
- Bob Razowsky
Re : Écran "rayé" sur portable Asus A6
Précision, avec le LiveCD d'installation, l'écran n'est pas rayé (mais est en vga au lieu de sis). Ce n'est donc pas un problème d'écran ou de carte graphique defectueuse.
Hello, même souci sur un Dell Precision M70 (sorte de barre horizontale) j'ai fini par rebooter sur le liveCD puis copier le xorg.conf générer par le liveCD et ecraser le xorg de mon installe de Kubuntu. Depuis tout marche nickel.
Bye
Bob
"Ca marche pas, c'est nul, c'est dur !!" > T'as lu la doc' débutant ? T'as cherché dans le wiki ? Non ? Alors rappel toi de ça : Linux c'est génial mais ça se merite !
Debian Etch sur Dell Inspiron 9400 : Core2Duo - nvidia 7900GS - 2Go de Ram - wifi ipw3945 - Beryl 1.99 - Vista ? OSEF !
Hors ligne
#6 Le 20/09/2006, à 14:24
- raspouille
Re : Écran "rayé" sur portable Asus A6
vous un probleme de synchro,et il faut reconfigurer le xserver.
connaitre la syncho horizontale et verticale de l'ecran.
en mode console:
code:
sudo dpkg-reconfigure xserver-xorg # prendre sis ou vesa de base et en manuel
reboot
@+
Linux Mint Mate 17.3 GNU/Linux.
Hors ligne
#7 Le 20/09/2006, à 15:29
- LudoRA
Re : Écran "rayé" sur portable Asus A6
Et en copiant-collant le xorg.conf de Debian sur le Kubuntu ça n'arrange pas le problème ?
C'est peut être le pilote Sis du Kubuntu qui est défectueux.
Même souci.
Dois-je en conclure qu'il s'agit du pilote de Kubuntu???
A ce moment là, je ne devrais pas être le seul à rapporter ce problème, non?
Hors ligne
#8 Le 20/09/2006, à 15:34
- LudoRA
Re : Écran "rayé" sur portable Asus A6
Hello, même souci sur un Dell Precision M70 (sorte de barre horizontale) j'ai fini par rebooter sur le liveCD puis copier le xorg.conf générer par le liveCD et ecraser le xorg de mon installe de Kubuntu. Depuis tout marche nickel.
Sauf que le xorg.conf obtenu avec le LiveCD est instisfaisant aussi.
En effet, il utilise le mode VGA plutôt que SiS. Ce qui a pour conséquence direct de planter le serveur graphique (écran désespérément noir) à chaque fois que je cherche à utilise un autre tty (Ctrl+Alt+F1) et impossible ensuite de revenir correctement au tty7.
Hors ligne
#9 Le 20/09/2006, à 15:48
- raspouille
Re : Écran "rayé" sur portable Asus A6
up
Linux Mint Mate 17.3 GNU/Linux.
Hors ligne
#10 Le 20/09/2006, à 15:50
- LudoRA
Re : Écran "rayé" sur portable Asus A6
vous un probleme de synchro,et il faut reconfigurer le xserver.
connaitre la syncho horizontale et verticale de l'ecran.
Bon. J'ai indiqué les mêmes synchros que pour mon PC debian. Bilan, même pb.
Si j'utilise vesa, c'est très très chouette. Tout va bien ... sauf que ... pas moyen de changer de tty sans planter le serveur.
Grrrrrr!!!!!
C'est embêtant.
Hors ligne
#11 Le 20/09/2006, à 17:35
- Bob Razowsky
Re : Écran "rayé" sur portable Asus A6
Sauf que le xorg.conf obtenu avec le LiveCD est instisfaisant aussi.
En effet, il utilise le mode VGA plutôt que SiS. Ce qui a pour conséquence direct de planter le serveur graphique (écran désespérément noir) à chaque fois que je cherche à utilise un autre tty (Ctrl+Alt+F1) et impossible ensuite de revenir correctement au tty7.
ba ....oui.....suffit de changer le driver aprés. C'est bien un soucis de synchro et pas de drivers. D'ou l'idée de faire un copier/coller du xorg du LiveCD. evidemment aprés il faut pas rester en Vesa Enfin bon voila quoi moi ca a marché nickel
"Ca marche pas, c'est nul, c'est dur !!" > T'as lu la doc' débutant ? T'as cherché dans le wiki ? Non ? Alors rappel toi de ça : Linux c'est génial mais ça se merite !
Debian Etch sur Dell Inspiron 9400 : Core2Duo - nvidia 7900GS - 2Go de Ram - wifi ipw3945 - Beryl 1.99 - Vista ? OSEF !
Hors ligne
#12 Le 20/09/2006, à 17:51
- raspouille
Re : Écran "rayé" sur portable Asus A6
quelle marque le portable.
Linux Mint Mate 17.3 GNU/Linux.
Hors ligne
#13 Le 20/09/2006, à 17:51
- LudoRA
Re : Écran "rayé" sur portable Asus A6
Comment changer de driver alors (je ne pense pas qu'il s'agisse de synchro puisque ça ne fonctionne pas avec les synchros tel que sur le pc debian)???
Dans la liste des dépôts, j'ai le choix entre SiS et SiS USB, et ils sont déjà installés.
???
Hors ligne
#14 Le 20/09/2006, à 17:52
- raspouille
Re : Écran "rayé" sur portable Asus A6
up
Linux Mint Mate 17.3 GNU/Linux.
Hors ligne
#15 Le 21/09/2006, à 09:44
- LudoRA
Re : Écran "rayé" sur portable Asus A6
quelle marque le portable.
Asus A6
Hors ligne
#16 Le 21/09/2006, à 11:57
- raspouille
Re : Écran "rayé" sur portable Asus A6
mea culpa ma question etait dans le titre,rien sur le manuel sur la synchro.
j'ai trouve ca
Mon écran est tout décalé ou tout flou
Lancez xvidtune à partir d'un xterm. Notez les valeurs qu'il vous donne (commande show). Ouvrez le /etc/X11/XF86Config. Vous devez trouver une ligne de Modeline où toutes ces valeurs apparaissent. Marquez-la d'un commentaire. Agissez sur les réglages de xvidtune. Lorsque le centrage vous convient, remplacez les anciennes valeurs du XF86Config par les nouvelles que vous donne xvidtune. Faites pareil pour toutes les résolutions. Kvidtune est encore plus beau !
Attention ! Sur Xfree 4.x et X.org, les Modelines de XF86Config sont facultatifs (si tout va bien). Il autodétecte les résolutions du moniteur. Si vous y tenez vraiment, vous pouvez mettre des modelines identiques au même endroit qu'auparavant (section Monitor).
Si vous avez un écran à la résolution bizarre, vous devez d'abord identifier ses caractéristiques de résolution et de rafraîchissement (tapez xrandr en ligne de commandes) :
$ xrandr
SZ: Pixels Physical Refresh
*0 1280 x 1024 ( 332mm x 250mm ) *60
1 1024 x 768 ( 332mm x 250mm ) 85 75 70 60 87
puis calculer un Modeline personnalisé. Pour cela, vous disposez d'un utilitaire : gtf.
gtf 1600 1024 60 (résolution H – V fréquence verticale)
# 1600x1024 @ 60.00 Hz (GTF) hsync: 63.60 kHz; pclk: 136.36 MHz
Modeline "1600x1024_60.00" 136.36 1600 1704 1872 2144 1024 1025 1028 1060-HSync +Vsync
Vous devez copier la ligne ci-dessus dans la section Monitor du XF86Config.
a l'adresse:
http://www.delafond.org/survielinux/#resol
@+j'ai testé
Dernière modification par raspouille (Le 21/09/2006, à 12:07)
Linux Mint Mate 17.3 GNU/Linux.
Hors ligne
#17 Le 22/09/2006, à 18:58
- LudoRA
Re : Écran "rayé" sur portable Asus A6
Bonjour.
J'ai testé gtf.
Voici mon nouveau xorg.conf:
Section "Monitor"
Identifier "Écran générique"
Option "DPMS"
HorizSync 28-50
VertRefresh 43-75
Modeline "1280x768_61.00" 81.57 1280 1344 1480 1680 768 769 772 796 -HSync +Vsync
EndSection
Section "Screen"
Identifier "Default Screen"
Device "Carte vidéo générique"
Monitor "Écran générique"
DefaultDepth 24
SubSection "Display"
Depth 24
Modes "1280x1024" "1280x960" "1280x854" "1280x800" "1280x768" "1200x800" "1152x864" "1152x768" "1024x768" "800x600" "640x480"
EndSubSection
EndSection
J'ai essayé avec le driver vesa puis avec le sis.
Pour le vesa, même résultat qu'avant les changements, à savoir, écran de qualité médiocre et plantage du serveur X11 quand on cherche à accéder aux différents TTY.
Pour le sis, même chose qu'avant changement aussi, à savoir rayures verticales (tramages), mais accès au différents TTY.
Voilà pour mes essais.
???
Hors ligne
#18 Le 22/09/2006, à 19:32
- raspouille
Re : Écran "rayé" sur portable Asus A6
essayer ubuntu Edgy Eft qui ressemble a la debian Etch.
qui se ressemble,s'assemble.
Linux Mint Mate 17.3 GNU/Linux.
Hors ligne
#19 Le 22/09/2006, à 20:20
- raspouille
Re : Écran "rayé" sur portable Asus A6
bon,j'ai trouvé une adresse:
SiS/XGI graphics chipsets and X.org/XFree86/Linux
http://www.winischhofer.eu/linuxsisvga.shtml
Linux Mint Mate 17.3 GNU/Linux.
Hors ligne
#20 Le 25/09/2006, à 12:56
- LudoRA
Re : Écran "rayé" sur portable Asus A6
Bonjour.
Merci pour le réponses.
Bon, même avec l'aide du site, je ne m'en sors pas tout seul, car je crois que ça dépasse mes compétences (en anglais comme en informatique).
Je ne sais pas par quel bout prendre les informations du site au regard de mon problème.
Pour avoir lu quelques sections, à vrai dire, si elles me concernaient, je pense que je ne serais même pas ce qu'il faudrait que je fasse.
Je pense qu'il a le mérite d'être complet et l'inconvénient d'être complet.
???
Hors ligne
#21 Le 25/09/2006, à 15:48
- LudoRA
Re : Écran "rayé" sur portable Asus A6
Tien! Pour donner du grain à moudre, je viens de ramrquer une erreur lors de l'installation de paquets en ligne de commande depuis Konsole:
sudo apt-get install g++
Lecture des listes de paquets... Fait
Construction de l'arbre des dépendances... Fait
Les paquets supplémentaires suivants seront installés :
g++-4.0 libc6-dev libstdc++6-4.0-dev linux-kernel-headers
Paquets suggérés :
gcc-4.0-doc lib64stdc++6 glibc-doc manpages-dev libstdc++6-4.0-doc stl-manual
Les NOUVEAUX paquets suivants seront installés :
g++ g++-4.0 libc6-dev libstdc++6-4.0-dev linux-kernel-headers
0 mis à jour, 5 nouvellement installés, 0 à enlever et 0 non mis à jour.
Il est nécessaire de prendre 7604ko dans les archives.
Après dépaquetage, 32,1Mo d'espace disque supplémentaires seront utilisés.
Souhaitez-vous continuer [O/n] ? o
Réception de : 1 http://fr.archive.ubuntu.com dapper/main linux-kernel-headers 2.6.11.2-0ubuntu18 [1039kB]
Réception de : 2 http://fr.archive.ubuntu.com dapper/main libc6-dev 2.3.6-0ubuntu20 [2822kB]
Réception de : 3 http://fr.archive.ubuntu.com dapper/main libstdc++6-4.0-dev 4.0.3-1ubuntu5 [1471kB]
Réception de : 4 http://fr.archive.ubuntu.com dapper/main g++-4.0 4.0.3-1ubuntu5 [2271kB]
Réception de : 5 http://fr.archive.ubuntu.com dapper/main g++ 4:4.0.3-1 [1386B]
7604ko réceptionnés en 34s (218ko/s)
X Error: BadDevice, invalid or uninitialized input device 168
Major opcode: 146
Minor opcode: 3
Resource id: 0x0
Failed to open device
X Error: BadDevice, invalid or uninitialized input device 168
Major opcode: 146
Minor opcode: 3
Resource id: 0x0
Failed to open device
X Error: BadDevice, invalid or uninitialized input device 168
Major opcode: 146
Minor opcode: 3
Resource id: 0x0
Failed to open device
X Error: BadDevice, invalid or uninitialized input device 168
Major opcode: 146
Minor opcode: 3
Resource id: 0x0
Failed to open device
DESTROY created new reference to dead object ' Qt::VBoxLayout', <> line 5 during global destruction.
Sélection du paquet linux-kernel-headers précédemment désélectionné.
(Lecture de la base de données... 87439 fichiers et répertoires déjà installés.)
Dépaquetage de linux-kernel-headers (à partir de .../linux-kernel-headers_2.6.11.2-0ubuntu18_i386.deb) ...
Sélection du paquet libc6-dev précédemment désélectionné.
Dépaquetage de libc6-dev (à partir de .../libc6-dev_2.3.6-0ubuntu20_i386.deb) ...
Sélection du paquet libstdc++6-4.0-dev précédemment désélectionné.
Dépaquetage de libstdc++6-4.0-dev (à partir de .../libstdc++6-4.0-dev_4.0.3-1ubuntu5_i386.deb) ...
Sélection du paquet g++-4.0 précédemment désélectionné.
Dépaquetage de g++-4.0 (à partir de .../g++-4.0_4.0.3-1ubuntu5_i386.deb) ...
Sélection du paquet g++ précédemment désélectionné.
Dépaquetage de g++ (à partir de .../g++_4%3a4.0.3-1_i386.deb) ...
Paramétrage de linux-kernel-headers (2.6.11.2-0ubuntu18) ...
Paramétrage de libc6-dev (2.3.6-0ubuntu20) ...
Paramétrage de g++-4.0 (4.0.3-1ubuntu5) ...
Paramétrage de libstdc++6-4.0-dev (4.0.3-1ubuntu5) ...
Paramétrage de g++ (4.0.3-1) ...
J'utilise le driver vesa en ce moment (puisque le sis est encore pire graphiquement).
Hors ligne
#22 Le 26/09/2006, à 19:19
- raspouille
Re : Écran "rayé" sur portable Asus A6
il pointe sur:
Réception de : 1 http://fr.archive.ubuntu.com dapper/main linux-kernel-headers 2.6.11.2-0ubuntu18 [1039kB]
au lieu du linux-kernel-headers 2.6.15
BadDevice, invalid or uninitialized input device 168:
http://forum.ubuntu-fr.org/viewtopic.php?pid=410170
Dernière modification par raspouille (Le 26/09/2006, à 19:37)
Linux Mint Mate 17.3 GNU/Linux.
Hors ligne
#23 Le 03/11/2006, à 13:45
- LudoRA
Re : Écran "rayé" sur portable Asus A6
Bonjour et désolé raspuoille, je n'avais pas remis l'oeil sur ce fil depuis lontemps.
En effet, je m'étais résolu à attendre la sortie de Edgy. Je ferais la mise à jour la semaine prochaine et informerai du résultat.
Sinon, comment se fait il que ça pointe vers un mauvais kernel???
Hors ligne
#24 Le 03/11/2006, à 14:53
- atlas95
Re : Écran "rayé" sur portable Asus A6
J'ai le meme probleme sur edgy, ligne horizontale quandje passe en tty 1, carte ati X1600 sur packard bell easynote V.
Up!
Ubuntu sur un XPS m1330:c'est ici !
Mon blog sur ubuntu:c'est ici !
Jabber : cyril at jabber.levis-heb.net
Hors ligne
#25 Le 06/11/2006, à 16:18
- Pinpin31
Re : Écran "rayé" sur portable Asus A6
Bonjour,
j'avais le même problème que vous : une carte Sis et un affichage rayé sur le moniteur. Par défaut, Ubuntu ne me trouvait pas ma carte graphique et me mettait le driver "vesa".
Pour contourner le problème, j'utilise un "DefaultDepth" de 16 au lieu de 24 dans la section Screen. Ce qui donne :
Section "Screen"
Identifier "Default Screen"
Device "Carte vidéo générique"
Monitor "Écran générique"
DefaultDepth 16
SubSection "Display"
Depth 1
Modes "1280x800" "1152x864" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 4
Modes "1280x800" "1152x864" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 8
Modes "1280x800" "1152x864" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 15
Modes "1280x800" "1152x864" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 16
Modes "1280x800" "1152x864" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 24
Modes "1280x800" "1152x864" "1024x768" "800x600" "640x480"
EndSubSection
EndSection
Et les rayures ont disparu... L'affichage est tout à fait correct en 1400x1050 et un taux de rafraichissement de 75Hz.
Bon courage.
Pinpin
Bonjour,
J'ai deux PC portables indentiques. Un sur Debian Etch (noyau 2.6.17-2-k7), l'autre sur Kubuntu (noyau 2.6.15-27-k7).
D'un point de vu graphique, sur le premier, tout va bien.
Par contre, celui sur Kubuntu affiche des rayures verticales de la gauche de l'écran jusqu'au 3/4 environ.Voici le xorg.conf du premier:
# XF86Config-4 (XFree86 X Window System server configuration file) # # This file was generated by dexconf, the Debian X Configuration tool, using # values from the debconf database. # # Edit this file with caution, and see the XF86Config-4 manual page. # (Type "man XF86Config-4" at the shell prompt.) # # This file is automatically updated on xserver-xfree86 package upgrades *only* # if it has not been modified since the last upgrade of the xserver-xfree86 # package. # # If you have edited this file but would like it to be automatically updated # again, run the following commands as root: # # cp /etc/X11/XF86Config-4 /etc/X11/XF86Config-4.custom # md5sum /etc/X11/XF86Config-4 >/var/lib/xfree86/XF86Config-4.md5sum # dpkg-reconfigure xserver-xfree86 Section "Files" FontPath "unix/:7100" # local font server # if the local font server has problems, we can fall back on these FontPath "/usr/share/fonts/X11/misc" FontPath "/usr/lib/X11/fonts/misc" FontPath "/usr/share/fonts/X11/cyrillic" FontPath "/usr/lib/X11/fonts/cyrillic" FontPath "/usr/lib/X11/fonts/100dpi/:unscaled" FontPath "/usr/lib/X11/fonts/75dpi/:unscaled" FontPath "/usr/share/fonts/X11/Type1" FontPath "/usr/lib/X11/fonts/Type1" FontPath "/usr/share/fonts/X11/CID" FontPath "/usr/lib/X11/fonts/CID" FontPath "/usr/lib/X11/fonts/Speedo" FontPath "/usr/share/fonts/X11/100dpi" FontPath "/usr/lib/X11/fonts/100dpi" FontPath "/usr/share/fonts/X11/75dpi" FontPath "/usr/lib/X11/fonts/75dpi" EndSection Section "Module" Load "bitmap" Load "dbe" Load "ddc" Load "dri" Load "extmod" Load "freetype" Load "glx" Load "int10" Load "record" Load "synaptics" Load "type1" Load "vbe" Load "xtt" EndSection Section "InputDevice" Identifier "Generic Keyboard" Driver "keyboard" Option "CoreKeyboard" Option "XkbRules" "xfree86" Option "XkbModel" "pc105" Option "XkbLayout" "fr" EndSection #Section "InputDevice" # Identifier "Configured Mouse" # Driver "mouse" # Option "CorePointer" # Option "Device" "/dev/psaux" # Option "Protocol" "ExplorerPS/2" # Option "Emulate3Buttons" "true" # Option "ZAxisMapping" "4 5" #EndSection Section "InputDevice" Identifier "Touchpad" Driver "synaptics" Option "CorePointer" Option "Device" "/dev/psaux" Option "Protocol" "auto-dev" Option "Emulate3Buttons" "true" Option "ZAxisMapping" "4 5" EndSection Section "Device" Identifier "Carte vidéo générique" Driver "sis" EndSection Section "Monitor" Identifier "Écran générique" HorizSync 28-50 VertRefresh 43-75 Option "DPMS" EndSection Section "Screen" Identifier "Default Screen" Device "Carte vidéo générique" Monitor "Écran générique" DefaultDepth 24 SubSection "Display" Depth 1 Modes "1280x800" "1152x864" "1024x768" "800x600" "640x480" EndSubSection SubSection "Display" Depth 4 Modes "1280x800" "1152x864" "1024x768" "800x600" "640x480" EndSubSection SubSection "Display" Depth 8 Modes "1280x800" "1152x864" "1024x768" "800x600" "640x480" EndSubSection SubSection "Display" Depth 15 Modes "1280x800" "1152x864" "1024x768" "800x600" "640x480" EndSubSection SubSection "Display" Depth 16 Modes "1280x800" "1152x864" "1024x768" "800x600" "640x480" EndSubSection SubSection "Display" Depth 24 Modes "1280x800" "1152x864" "1024x768" "800x600" "640x480" EndSubSection EndSection Section "ServerLayout" Identifier "Default Layout" Screen "Default Screen" InputDevice "Generic Keyboard" # InputDevice "Configured Mouse" InputDevice "Touchpad" EndSection #Section "DRI" # Mode 0666 #EndSection
Et voici celui du second (Kubuntu):
# /etc/X11/xorg.conf (xorg X Window System server configuration file) # # This file was generated by dexconf, the Debian X Configuration tool, using # values from the debconf database. # # Edit this file with caution, and see the /etc/X11/xorg.conf manual page. # (Type "man /etc/X11/xorg.conf" at the shell prompt.) # # This file is automatically updated on xserver-xorg package upgrades *only* # if it has not been modified since the last upgrade of the xserver-xorg # package. # # If you have edited this file but would like it to be automatically updated # again, run the following command: # sudo dpkg-reconfigure -phigh xserver-xorg Section "Files" FontPath "/usr/share/X11/fonts/misc" FontPath "/usr/share/X11/fonts/cyrillic" FontPath "/usr/share/X11/fonts/100dpi/:unscaled" FontPath "/usr/share/X11/fonts/75dpi/:unscaled" FontPath "/usr/share/X11/fonts/Type1" FontPath "/usr/share/X11/fonts/100dpi" FontPath "/usr/share/X11/fonts/75dpi" # path to defoma fonts FontPath "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType" EndSection Section "Module" Load "bitmap" Load "dbe" Load "ddc" Load "dri" Load "extmod" Load "freetype" Load "glx" Load "int10" Load "record" Load "type1" Load "v4l" Load "vbe" EndSection Section "InputDevice" Identifier "Generic Keyboard" Driver "kbd" Option "CoreKeyboard" Option "XkbRules" "xorg" Option "XkbModel" "pc105" Option "XkbLayout" "fr" EndSection Section "InputDevice" Identifier "Configured Mouse" Driver "mouse" Option "CorePointer" Option "Device" "/dev/input/mice" Option "Protocol" "ExplorerPS/2" Option "ZAxisMapping" "4 5" Option "Emulate3Buttons" "true" EndSection Section "InputDevice" Identifier "Synaptics Touchpad" Driver "synaptics" Option "SendCoreEvents" "true" Option "Device" "/dev/psaux" Option "Protocol" "auto-dev" Option "HorizScrollDelta" "0" EndSection Section "InputDevice" Driver "wacom" Identifier "stylus" Option "Device" "/dev/wacom" # Change to # /dev/input/event # for USB Option "Type" "stylus" Option "ForceDevice" "ISDV4" # Tablet PC ONLY EndSection Section "InputDevice" Driver "wacom" Identifier "eraser" Option "Device" "/dev/wacom" # Change to # /dev/input/event # for USB Option "Type" "eraser" Option "ForceDevice" "ISDV4" # Tablet PC ONLY EndSection Section "InputDevice" Driver "wacom" Identifier "cursor" Option "Device" "/dev/wacom" # Change to # /dev/input/event # for USB Option "Type" "cursor" Option "ForceDevice" "ISDV4" # Tablet PC ONLY EndSection Section "Device" Identifier "Carte vidéo générique" Driver "sis" BusID "PCI:1:0:0" EndSection Section "Monitor" Identifier "àcran générique" Option "DPMS" HorizSync 28-64 VertRefresh 43-60 EndSection Section "Screen" Identifier "Default Screen" Device "Carte vidéo générique" Monitor "àcran générique" DefaultDepth 24 SubSection "Display" Depth 1 Modes "1280x1024" "1280x960" "1280x854" "1280x800" "1280x768" "1200x800" "1152x864" "1152x768" "1024x768" "800x600" "640x480" EndSubSection SubSection "Display" Depth 4 Modes "1280x1024" "1280x960" "1280x854" "1280x800" "1280x768" "1200x800" "1152x864" "1152x768" "1024x768" "800x600" "640x480" EndSubSection SubSection "Display" Depth 8 Modes "1280x1024" "1280x960" "1280x854" "1280x800" "1280x768" "1200x800" "1152x864" "1152x768" "1024x768" "800x600" "640x480" EndSubSection SubSection "Display" Depth 15 Modes "1280x1024" "1280x960" "1280x854" "1280x800" "1280x768" "1200x800" "1152x864" "1152x768" "1024x768" "800x600" "640x480" EndSubSection SubSection "Display" Depth 16 Modes "1280x1024" "1280x960" "1280x854" "1280x800" "1280x768" "1200x800" "1152x864" "1152x768" "1024x768" "800x600" "640x480" EndSubSection SubSection "Display" Depth 24 Modes "1280x1024" "1280x960" "1280x854" "1280x800" "1280x768" "1200x800" "1152x864" "1152x768" "1024x768" "800x600" "640x480" EndSubSection EndSection Section "ServerLayout" Identifier "Default Layout" Screen "Default Screen" InputDevice "Generic Keyboard" InputDevice "Configured Mouse" InputDevice "stylus" "SendCoreEvents" InputDevice "cursor" "SendCoreEvents" InputDevice "eraser" "SendCoreEvents" InputDevice "Synaptics Touchpad" EndSection Section "DRI" Mode 0666 EndSection
Et pour le matériel:
lspci |grep -i display 01:00.0 VGA compatible controller: Silicon Integrated Systems [SiS] 661/741/760/761 PCI/AGP VGA Display Adapter
Voilà. Si vous avez une idée.