Carte télé hybride philips dual 7131E

Raphraphou · Le 15/10/2006, à 22:03

Bonjour à tous,

Moi j'ai un double tuner (terrestre et tnt).
Mn Pc est un medion, le MD8800 et j'ai donc un Nvidia modifiée et plein de connectiques pour tv, peritel, ect....

Carte graphique NVIDIA® GeForceTM 6700 XL (équivalent d'une Geforce 6600 GT)
Prise sortie TV via : Péritel, S-Vidéo, Composite ou Composant (YUV; YPrPb)
High Definition. Mémoire GDDR3 ultrarapide cadencée à 1100 MHz.
Processeur graphique nVidia GeForce 6700XL cadencé à 525 MHz.
Bus PCI Express 128 Mo x16

carte tv hybrid philips dual 7131E

• 2x DVB-S réception satellite numérique
• 2x TNT la télévision numérique "partout"
• 2x TV ANALOGIQUE/CÂBLE

Comment pourrais-je faire pour pouvoir utiliser au maximum ces ressources et utiliser mes tuners TV??
Un tout grand merci,
Raph.

Voici les resultats :

0000:00:00.0 Host bridge: Intel Corporation 945G/P Memory Controller Hub (rev 81)
0000:00:01.0 PCI bridge: Intel Corporation 945G/P PCI Express Graphics Port (rev 81)
0000:00:1b.0 0403: Intel Corporation 82801G (ICH7 Family) High Definition Audio Controller (rev 01)
0000:00:1d.0 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI #1 (rev 01)
0000:00:1d.1 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI #2 (rev 01)
0000:00:1d.2 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI #3 (rev 01)
0000:00:1d.3 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI #4 (rev 01)
0000:00:1d.7 USB Controller: Intel Corporation 82801G (ICH7 Family) USB2 EHCI Controller (rev 01)
0000:00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev e1)
0000:00:1f.0 ISA bridge: Intel Corporation 82801GB/GR (ICH7 Family) LPC Interface Bridge (rev 01)
0000:00:1f.1 IDE interface: Intel Corporation 82801G (ICH7 Family) IDE Controller (rev 01)
0000:00:1f.2 IDE interface: Intel Corporation 82801GB/GR/GH (ICH7 Family) Serial ATA Storage Controllers cc=IDE (rev 01)
0000:00:1f.3 SMBus: Intel Corporation 82801G (ICH7 Family) SMBus Controller (rev 01)
0000:01:00.0 VGA compatible controller: nVidia Corporation: Unknown device 0147 (rev a2)
0000:02:01.0 Multimedia controller: Philips Semiconductors SAA7133 Video Broadcast Decoder (rev d1)
0000:02:02.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10)
0000:02:03.0 FireWire (IEEE 1394): VIA Technologies, Inc. IEEE 1394 Host Controller (rev 80)
0000:02:04.0 Multimedia controller: Philips Semiconductors SAA7133 Video Broadcast Decoder (rev d1)
0000:02:05.0 Communication controller: Agere Systems: Unknown device 0620

    0.000000] Bootdata ok (command line is root=/dev/sda1 ro quiet splash)
[    0.000000] Linux version 2.6.15-27-amd64-generic (buildd@king) (gcc version 4.0.3 (Ubuntu 4.0.3-1ubuntu5)) #1 SMP PREEMPT Sat Sep 16 01:50:50 UTC 2006
[    0.000000] BIOS-provided physical RAM map:
[    0.000000]  BIOS-e820: 0000000000000000 - 000000000009f000 (usable)
[    0.000000]  BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved)
[    0.000000]  BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[    0.000000]  BIOS-e820: 0000000000100000 - 000000003fee0000 (usable)
[    0.000000]  BIOS-e820: 000000003fee0000 - 000000003fee3000 (ACPI NVS)
[    0.000000]  BIOS-e820: 000000003fee3000 - 000000003fef0000 (ACPI data)
[    0.000000]  BIOS-e820: 000000003fef0000 - 000000003ff00000 (reserved)
[    0.000000]  BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
[    0.000000]  BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
[    0.000000] ACPI: RSDP (v000 IntelR                                ) @ 0x00000000000f8dd0
[    0.000000] ACPI: RSDT (v001 IntelR AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x000000003fee3040
[    0.000000] ACPI: FADT (v001 IntelR AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x000000003fee30c0
[    0.000000] ACPI: MCFG (v001 IntelR AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x000000003fee7b80
[    0.000000] ACPI: MADT (v001 IntelR AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x000000003fee7a80
[    0.000000] ACPI: SSDT (v001  PmRef  Cpu0Ist 0x00003000 INTL 0x20041203) @ 0x000000003fee7c00
[    0.000000] ACPI: SSDT (v001  PmRef    CpuPm 0x00003000 INTL 0x20041203) @ 0x000000003fee8090
[    0.000000] ACPI: DSDT (v001 INTELR AWRDACPI 0x00001000 MSFT 0x0100000e) @ 0x0000000000000000
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at 0000000000000000-000000003fee0000
[    0.000000] Bootmem setup node 0 0000000000000000-000000003fee0000
[    0.000000] On node 0 totalpages: 257251
[    0.000000]   DMA zone: 3015 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 254236 pages, LIFO batch:31
[    0.000000]   Normal zone: 0 pages, LIFO batch:0
[    0.000000]   HighMem zone: 0 pages, LIFO batch:0
[    0.000000] ACPI: PM-Timer IO Port: 0x408
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[    0.000000] Processor #0 15:4 APIC version 20
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[    0.000000] Processor #1 15:4 APIC version 20
[    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] disabled)
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[    0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 4, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Setting APIC routing to physical flat
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] Allocating PCI resources starting at 40000000 (gap: 3ff00000:a0100000)
[    0.000000] Checking aperture...
[    0.000000] SMP: Allowing 4 CPUs, 2 hotplug CPUs
[    0.000000] Built 1 zonelists
[    0.000000] Kernel command line: root=/dev/sda1 ro quiet splash
[    0.000000] Initializing CPU#0
[    0.000000] PID hash table entries: 4096 (order: 12, 131072 bytes)
[    0.000000] time.c: Using 3.579545 MHz PM timer.
[    0.000000] time.c: Detected 2999.788 MHz processor.
[   66.338612] Console: colour VGA+ 80x25
[   66.339233] Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes)
[   66.339839] Inode-cache hash table entries: 65536 (order: 7, 524288 bytes)
[   66.348810] Memory: 1020056k/1047424k available (2151k kernel code, 26980k reserved, 757k data, 180k init)
[   66.426784] Calibrating delay using timer specific routine.. 6009.06 BogoMIPS (lpj=12018130)
[   66.426843] Security Framework v1.0.0 initialized
[   66.426848] SELinux:  Disabled at boot.
[   66.426873] Mount-cache hash table entries: 256
[   66.427012] CPU: Trace cache: 12K uops, L1 D cache: 16K
[   66.427015] CPU: L2 cache: 1024K
[   66.427018] using mwait in idle threads.
[   66.427021] CPU: Physical Processor ID: 0
[   66.427023] CPU: Processor Core ID: 0
[   66.427034] CPU0: Thermal monitoring enabled (TM1)
[   66.427038] mtrr: v2.0 (20020519)
[   66.427048] SMP alternatives: switching to UP code
[   66.427366] checking if image is initramfs... it is
[   67.133298] Freeing initrd memory: 7098k freed
[   67.138089] ACPI: Looking for DSDT ... not found!
[   67.183617] Using local APIC timer interrupts.
[   67.216922] Detected 12.499 MHz APIC timer.
[   67.217043] SMP alternatives: switching to SMP code
[   67.217165] Booting processor 1/2 APIC 0x1
[   67.227563] Initializing CPU#1
[   67.305869] Calibrating delay using timer specific routine.. 5999.88 BogoMIPS (lpj=11999767)
[   67.305881] CPU: Trace cache: 12K uops, L1 D cache: 16K
[   67.305883] CPU: L2 cache: 1024K
[   67.305886] CPU: Physical Processor ID: 0
[   67.305888] CPU: Processor Core ID: 1
[   67.305898] CPU1: Thermal monitoring enabled (TM1)
[   67.306108]               Intel(R) Pentium(R) D CPU 3.00GHz stepping 04
[   67.306117] APIC error on CPU1: 00(40)
[   67.306120] CPU 1: Syncing TSC to CPU 0.
[   67.306314] CPU 1: synchronized TSC with CPU 0 (last diff 34 cycles, maxerr 1500 cycles)
[   67.306329] Brought up 2 CPUs
[   67.306363] time.c: Using PIT/TSC based timekeeping.
[   67.306366] testing NMI watchdog ... OK.
[   67.346762] NET: Registered protocol family 16
[   67.346792] ACPI: bus type pci registered
[   67.346799] PCI: Using configuration type 1
[   67.352643] PCI: Using MMCONFIG at e0000000
[   67.352680] mtrr: your CPUs had inconsistent variable MTRR settings
[   67.352682] mtrr: probably your BIOS does not setup all CPUs.
[   67.352684] mtrr: corrected configuration.
[   67.353423] ACPI: Subsystem revision 20051216
[   67.358538] ACPI: Interpreter enabled
[   67.358541] ACPI: Using IOAPIC for interrupt routing
[   67.359357] ACPI: PCI Root Bridge [PCI0] (0000:00)
[   67.359360] PCI: Probing PCI hardware (bus 00)
[   67.362430] PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1
[   67.362566] Boot video device is 0000:01:00.0
[   67.362887] PCI: Transparent bridge - 0000:00:1e.0
[   67.362925] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[   67.378408] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
[   67.383514] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 7 9 10 *11 12 14 15)
[   67.383852] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 7 9 10 *11 12 14 15)
[   67.384185] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 7 *9 10 11 12 14 15)
[   67.384521] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 7 9 *10 11 12 14 15)
[   67.384869] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 7 9 *10 11 12 14 15)
[   67.385205] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 7 *9 10 11 12 14 15)
[   67.385537] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 7 9 10 11 12 14 15) *0, disabled.
[   67.385879] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 7 9 10 *11 12 14 15)
[   67.386207] Linux Plug and Play Support v0.97 (c) Adam Belay
[   67.386217] pnp: PnP ACPI init
[   67.391489] pnp: PnP ACPI: found 13 devices
[   67.391508] PCI: Using ACPI for IRQ routing
[   67.391511] PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
[   67.391629] PCI-DMA: Disabling IOMMU.
[   67.392228] pnp: 00:09: ioport range 0x400-0x4bf could not be reserved
[   67.392474] PCI: Bridge: 0000:00:01.0
[   67.392477]   IO window: d000-dfff
[   67.392480]   MEM window: f4000000-fbffffff
[   67.392483]   PREFETCH window: d8000000-dfffffff
[   67.392487] PCI: Bridge: 0000:00:1e.0
[   67.392490]   IO window: e000-efff
[   67.392493]   MEM window: fde00000-fdefffff
[   67.392497]   PREFETCH window: fdd00000-fddfffff
[   67.392507] GSI 16 sharing vector 0xA9 and IRQ 16
[   67.392511] ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 169
[   67.392516] PCI: Setting latency timer of device 0000:00:01.0 to 64
[   67.392523] PCI: Setting latency timer of device 0000:00:1e.0 to 64
[   67.393122] IA32 emulation $Id: sys_ia32.c,v 1.32 2002/03/24 13:02:28 ak Exp $
[   67.393650] audit: initializing netlink socket (disabled)
[   67.393665] audit(1160903683.056:1): initialized
[   67.393964] VFS: Disk quotas dquot_6.5.1
[   67.393992] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[   67.394069] Initializing Cryptographic API
[   67.394073] io scheduler noop registered
[   67.394091] io scheduler anticipatory registered
[   67.394109] io scheduler deadline registered
[   67.394157] io scheduler cfq registered
[   67.395064] ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 169
[   67.395071] PCI: Setting latency timer of device 0000:00:01.0 to 64
[   67.395088] assign_interrupt_mode Found MSI capability
[   67.395126] Allocate Port Service[pcie00]
[   67.395169] Allocate Port Service[pcie03]
[   67.417425] Real Time Clock Driver v1.12
[   67.417479] Linux agpgart interface v0.101 (c) Dave Jones
[   67.417685] PNP: No PS/2 controller found. Probing ports directly.
[   67.918423] i8042.c: Can't read CTR while initializing i8042.
[   67.918464] Serial: 8250/16550 driver $Revision: 1.90 $ 48 ports, IRQ sharing enabled
[   67.918602] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[   67.918724] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[   67.921245] 00:06: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[   67.921433] 00:07: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[   67.922122] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[   67.922185] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[   67.922189] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[   67.922387] mice: PS/2 mouse device common for all mice
[   67.922531] NET: Registered protocol family 2
[   67.973815] IP route cache hash table entries: 32768 (order: 6, 262144 bytes)
[   67.974108] TCP established hash table entries: 131072 (order: 9, 2097152 bytes)
[   67.975108] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[   67.975689] TCP: Hash tables configured (established 131072 bind 65536)
[   67.975692] TCP reno registered
[   67.975827] TCP bic registered
[   67.975848] NET: Registered protocol family 1
[   67.975857] NET: Registered protocol family 8
[   67.975859] NET: Registered protocol family 20
[   67.976005] ACPI wakeup devices:
[   67.976012] SLPB PCI0 PEX0 PEX1 PEX2 PEX3 HUB0 UAR1 UAR2 USB0 USB1 USB2 USB3 USBE AC97 AZAL
[   67.976025] ACPI: (supports S0 S3 S4 S5)
[   67.976112] Freeing unused kernel memory: 180k freed
[   68.024283] vga16fb: initializing
[   68.024287] vga16fb: mapped to 0xffff8100000a0000
[   68.234682] Console: switching to colour frame buffer device 80x25
[   68.234687] fb0: VGA16 VGA frame buffer device
[   69.250522] Capability LSM initialized
[   69.297437] ACPI: Fan [FAN] (on)
[   69.305845] ACPI: Thermal Zone [THRM] (65 C)
[   69.832660] ICH7: IDE controller at PCI slot 0000:00:1f.1
[   69.832677] GSI 17 sharing vector 0xC1 and IRQ 17
[   69.832681] ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 193
[   69.832694] ICH7: chipset revision 1
[   69.832696] ICH7: not 100% native mode: will probe irqs later
[   69.832707]     ide0: BM-DMA at 0xfb00-0xfb07, BIOS settings: hda:DMA, hdb:DMA
[   69.832725] Probing IDE interface ide0...
[   70.567824] hda: SONY DVD RW DW-Q31A, ATAPI CD/DVD-ROM drive
[   71.351001] hdb: SONY DVD-ROM DDU1615, ATAPI CD/DVD-ROM drive
[   71.407178] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[   71.427978] hda: ATAPI 48X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache, UDMA(33)
[   71.427988] Uniform CD-ROM driver Revision: 3.20
[   71.430831] hdb: ATAPI 40X DVD-ROM drive, 254kB Cache, UDMA(33)
[   71.463035] SCSI subsystem initialized
[   71.464614] ACPI: bus type scsi registered
[   71.464617] libata version 1.20 loaded.
[   71.465751] ata_piix 0000:00:1f.2: version 1.05
[   71.465760] ata_pci_init_one: pci_dev class+intf: 0x1018f
[   71.465762] ata_pci_init_one: NO_LEGACY == 0
[   71.465780] GSI 18 sharing vector 0xC9 and IRQ 18
[   71.465783] ACPI: PCI Interrupt 0000:00:1f.2[b] -> GSI 19 (level, low) -> IRQ 201
[   71.465795] PCI: Setting latency timer of device 0000:00:1f.2 to 64
[   71.465851] ata1: PATA max UDMA/133 cmd 0xFA00 ctl 0xF902 bmdma 0xF600 irq 201
[   71.465879] ata2: PATA max UDMA/133 cmd 0xF800 ctl 0xF702 bmdma 0xF608 irq 201
[   71.631339] ata1: dev 0 cfg 00:0c5a 49:2f00 82:346b 83:7d01 84:4023 85:3469 86:3c01 87:4023 88:207f 93:0000
[   71.631343] ata1: dev 0 ATA-7, max UDMA/133, 488397168 sectors: LBA48
[   71.632494] sata_get_dev_handle: SATA dev addr=0x1f0002, handle=0xffff810037fdacc0
[   71.637485] ata1: dev 0 configured for UDMA/133
[   71.638538] sata_get_dev_handle: SATA dev addr=0x1f0002, handle=0xffff810037fdacc0
[   71.643383] scsi0 : ata_piix
[   72.818749] ata2: disabling port
[   72.818752] scsi1 : ata_piix
[   72.818882]   Vendor: ATA       Model: ST3250823AS       Rev: 3.03
[   72.818896]   Type:   Direct-Access                      ANSI SCSI revision: 05
[   72.825386] Driver 'sd' needs updating - please use bus_type methods
[   72.825462] SCSI device sda: 488397168 512-byte hdwr sectors (250059 MB)
[   72.825487] SCSI device sda: drive cache: write back
[   72.825545] SCSI device sda: 488397168 512-byte hdwr sectors (250059 MB)
[   72.825567] SCSI device sda: drive cache: write back
[   72.825572]  sda: sda1 sda2 sda3 sda4 < sda5 >
[   72.872122] sd 0:0:0:0: Attached scsi disk sda
[   73.137030] usbcore: registered new driver usbfs
[   73.137055] usbcore: registered new driver hub
[   73.138013] USB Universal Host Controller Interface driver v2.3
[   73.138086] GSI 19 sharing vector 0xD1 and IRQ 19
[   73.138090] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 209
[   73.138101] PCI: Setting latency timer of device 0000:00:1d.0 to 64
[   73.138104] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[   73.138387] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
[   73.138398] uhci_hcd 0000:00:1d.0: irq 209, io base 0x0000ff00
[   73.138504] hub 1-0:1.0: USB hub found
[   73.138512] hub 1-0:1.0: 2 ports detected
[   73.153734] ieee1394: Initialized config rom entry `ip1394'
[   73.242079] ACPI: PCI Interrupt 0000:00:1d.1[b] -> GSI 19 (level, low) -> IRQ 201
[   73.242096] PCI: Setting latency timer of device 0000:00:1d.1 to 64
[   73.242100] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[   73.242143] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
[   73.242152] uhci_hcd 0000:00:1d.1: irq 201, io base 0x0000fe00
[   73.242253] hub 2-0:1.0: USB hub found
[   73.242259] hub 2-0:1.0: 2 ports detected
[   73.345956] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 193
[   73.345963] PCI: Setting latency timer of device 0000:00:1d.2 to 64
[   73.345966] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[   73.346006] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
[   73.346014] uhci_hcd 0000:00:1d.2: irq 193, io base 0x0000fd00
[   73.346103] hub 3-0:1.0: USB hub found
[   73.346110] hub 3-0:1.0: 2 ports detected
[   73.449821] ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 16 (level, low) -> IRQ 169
[   73.449828] PCI: Setting latency timer of device 0000:00:1d.3 to 64
[   73.449831] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[   73.449865] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4
[   73.449873] uhci_hcd 0000:00:1d.3: irq 169, io base 0x0000fc00
[   73.449969] hub 4-0:1.0: USB hub found
[   73.449975] hub 4-0:1.0: 2 ports detected
[   73.554087] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 209
[   73.554479] PCI: Setting latency timer of device 0000:00:1d.7 to 64
[   73.554485] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[   73.554523] PCI: cache line size of 128 is not supported by device 0000:00:1d.7
[   73.554564] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5
[   73.554573] ehci_hcd 0000:00:1d.7: irq 209, io mem 0xfdfff000
[   73.558446] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[   73.558529] hub 5-0:1.0: USB hub found
[   73.558537] hub 5-0:1.0: 8 ports detected
[   73.585711] usb 2-1: new full speed USB device using uhci_hcd and address 2
[   73.661915] ohci1394: $Rev: 1313 $ Ben Collins <bcollins@debian.org>
[   73.661936] ACPI: PCI Interrupt 0000:02:03.0[A] -> GSI 19 (level, low) -> IRQ 201
[   73.661941] PCI: Via IRQ fixup for 0000:02:03.0, from 10 to 9
[   73.715850] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[201]  MMIO=[fdefd000-fdefd7ff]  Max Packet=[2048]
[   73.732197] Probing IDE interface ide1...
[   74.277019] usb 5-3: new high speed USB device using ehci_hcd and address 2
[   74.321952] Attempting manual resume
[   74.343446] EXT3-fs: mounted filesystem with ordered data mode.
[   74.343706] kjournald starting.  Commit interval 5 seconds
[   74.411721] hub 5-3:1.0: USB hub found
[   74.411949] hub 5-3:1.0: 4 ports detected
[   74.762155] usb 5-4: new high speed USB device using ehci_hcd and address 3
[   74.998340] ieee1394: Host added: ID:BUS[0-00:1023]  GUID[0010dc0000c77a32]
[   75.462217] usb 5-3.2: new high speed USB device using ehci_hcd and address 6
[   75.913989] usb 5-3.3: new low speed USB device using ehci_hcd and address 7
[   76.249560] usb 3-1: new full speed USB device using uhci_hcd and address 2
[   76.657328] usb 3-2: new low speed USB device using uhci_hcd and address 3
[   79.378163] sd 0:0:0:0: Attached scsi generic sg0 type 0
[   81.299849] agpgart: Detected an Intel 945G Chipset.
[   81.317878] agpgart: AGP aperture is 256M @ 0x0
[   81.357600] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[   81.391451] hw_random: RNG not detected
[   81.468988] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[   81.604867] Linux video capture interface: v1.00
[   81.622221] 8139too Fast Ethernet driver 0.9.27
[   81.622261] ACPI: PCI Interrupt 0000:02:02.0[A] -> GSI 18 (level, low) -> IRQ 193
[   81.622964] eth0: RealTek RTL8139 at 0xffffc2001009c000, 00:13:d3:b3:b1:5a, IRQ 193
[   81.622968] eth0:  Identified 8139 chip type 'RTL-8100B/8139D'
[   81.629140] 8139cp: 10/100 PCI Ethernet driver v1.2 (Mar 22, 2004)
[   81.736305] saa7130/34: v4l2 driver version 0.2.14 loaded
[   81.736374] GSI 20 sharing vector 0xD9 and IRQ 20
[   81.736377] ACPI: PCI Interrupt 0000:02:01.0[A] -> GSI 17 (level, low) -> IRQ 217
[   81.736385] saa7133[0]: found at 0000:02:01.0, rev: 209, irq: 217, latency: 32, mmio: 0xfdeff000
[   81.736391] saa7133[0]: subsystem: 16be:0007, board: UNKNOWN/GENERIC [card=0,autodetected]
[   81.736403] saa7133[0]: board init: gpio is 0
[   81.756331] nvidia: module license 'NVIDIA' taints kernel.
[   81.759949] ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 169
[   81.759958] PCI: Setting latency timer of device 0000:01:00.0 to 64
[   81.807018] idVendor = 0x148f, idProduct = 0x2570
[   81.807142] INIT bRadio=1
[   81.807152] usbcore: registered new driver rtusb
[   81.829050] input: X10 WTI RF receiver as /class/input/input0
[   81.829138] usbcore: registered new driver ati_remote
[   81.829142] drivers/usb/input/ati_remote.c: Registered USB driver ATI/X10 RF USB Remote Control v. 2.2.1
[   81.836963] drivers/usb/input/ati_remote.c: Weird data, len=1 ff 00 00 00 00 00 ...
[   81.868492] input: PC Speaker as /class/input/input1
[   81.890591] saa7133[0]: i2c eeprom 00: be 16 07 00 54 20 1c 00 43 43 a9 1c 55 d2 b2 92
[   81.890604] saa7133[0]: i2c eeprom 10: 00 ff 86 0f ff 20 ff 00 01 50 32 79 01 3c ca 50
[   81.890615] saa7133[0]: i2c eeprom 20: 01 40 01 02 02 03 01 00 06 ff 00 23 02 51 96 2b
[   81.890625] saa7133[0]: i2c eeprom 30: a7 58 7a 1f 03 8e 84 5e da 7a 04 b3 05 87 b2 3c
[   81.890635] saa7133[0]: i2c eeprom 40: ff 28 00 c0 96 10 03 00 c0 1c fd 79 44 9f c2 8f
[   81.890645] saa7133[0]: i2c eeprom 50: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[   81.890656] saa7133[0]: i2c eeprom 60: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[   81.890666] saa7133[0]: i2c eeprom 70: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[   81.890869] saa7133[0]: registered device video0 [v4l2]
[   81.890887] saa7133[0]: registered device vbi0
[   81.890975] GSI 21 sharing vector 0xE1 and IRQ 21
[   81.890979] ACPI: PCI Interrupt 0000:02:04.0[A] -> GSI 20 (level, low) -> IRQ 225
[   81.890987] saa7133[1]: found at 0000:02:04.0, rev: 209, irq: 225, latency: 32, mmio: 0xfdefc000
[   81.890994] saa7133[1]: subsystem: 16be:0008, board: UNKNOWN/GENERIC [card=0,autodetected]
[   81.891014] saa7133[1]: board init: gpio is 0
[   81.966111] drivers/usb/class/usblp.c: usblp0: USB Bidirectional printer dev 2 if 0 alt 0 proto 2 vid 0x03F0 pid 0x1904
[   81.966155] usbcore: registered new driver usblp
[   81.966159] drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver
[   81.982131] usbcore: registered new driver hiddev
[   81.999142] input: Logitech USB Receiver as /class/input/input2
[   81.999169] input: USB HID v1.10 Keyboard [Logitech USB Receiver] on usb-0000:00:1d.2-2
[   82.034136] input: Logitech USB Receiver as /class/input/input3
[   82.034180] input: USB HID v1.10 Mouse [Logitech USB Receiver] on usb-0000:00:1d.2-2
[   82.034193] usbcore: registered new driver usbhid
[   82.034196] drivers/usb/input/hid-core.c: v2.6:USB HID core driver
[   82.038431] saa7133[1]: i2c eeprom 00: be 16 08 00 54 20 1c 00 43 43 a9 1c 55 d2 b2 92
[   82.038443] saa7133[1]: i2c eeprom 10: 00 ff 86 0f ff 20 ff 00 01 50 32 79 01 3c ca 50
[   82.038454] saa7133[1]: i2c eeprom 20: 01 40 01 02 02 03 01 0f 0f ff 00 3c 02 51 96 2b
[   82.038464] saa7133[1]: i2c eeprom 30: a7 58 7a 1f 03 8e 84 5e da 7a 04 b3 05 87 b2 3c
[   82.038474] saa7133[1]: i2c eeprom 40: ff 28 00 c0 96 10 03 01 c0 1c fd 79 44 9f c2 8f
[   82.038484] saa7133[1]: i2c eeprom 50: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[   82.038494] saa7133[1]: i2c eeprom 60: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[   82.038504] saa7133[1]: i2c eeprom 70: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[   82.038835] saa7133[1]: registered device video1 [v4l2]
[   82.038948] saa7133[1]: registered device vbi1
[   82.039074] NVRM: loading NVIDIA Linux x86_64 Kernel Module  1.0-8762  Mon May 15 13:58:14 PDT 2006
[   82.174804] eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
[   82.179326] Floppy drive(s): fd0 is 1.44M
[   82.187155] ts: Compaq touchscreen protocol output
[   82.213859] FDC 0 is a post-1991 82077
[   82.291743] parport: PnPBIOS parport detected.
[   82.291798] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,ECP,DMA]
[   82.315570] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 16 (level, low) -> IRQ 169
[   82.316152] PCI: Setting latency timer of device 0000:00:1b.0 to 64
[   82.328990] saa7134 ALSA driver for DMA sound loaded
[   82.329023] saa7133[0]/alsa: saa7133[0] at 0xfdeff000 irq 217 registered as card -1
[   82.699564] hda_codec: Unknown model for ALC882, trying auto-probe from BIOS...
[   83.100277] lp0: using parport0 (interrupt-driven).
[   83.169487] sbp2: $Rev: 1306 $ Ben Collins <bcollins@debian.org>
[   83.169492] ieee1394: sbp2: Driver forced to serialize I/O (serialize_io=1)
[   83.169494] ieee1394: sbp2: Try serialize_io=0 for better performance
[   83.260928] Adding 2096468k swap on /dev/sda2.  Priority:-1 extents:1 across:2096468k
[   83.300744] NET: Registered protocol family 17
[   83.324735] EXT3 FS on sda1, internal journal
[   83.525936] md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
[   83.525940] md: bitmap version 4.39
[   84.151827] device-mapper: 4.4.0-ioctl (2005-01-12) initialised: dm-devel@redhat.com
[   84.606836] cdrom: open failed.
[   84.779424] cdrom: open failed.
[   84.781300] cdrom: open failed.
[   84.798185] NET: Registered protocol family 10
[   84.798309] lo: Disabled Privacy Extensions
[   84.798446] IPv6 over IPv4 tunneling driver
[   85.269104] kjournald starting.  Commit interval 5 seconds
[   85.269246] EXT3 FS on sda3, internal journal
[   85.269252] EXT3-fs: mounted filesystem with ordered data mode.
[   85.310387] FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
[   92.310532] ACPI: Power Button (FF) [PWRF]
[   92.310544] ACPI: Power Button (CM) [PWRB]
[   92.310552] ACPI: Sleep Button (CM) [SLPB]
[   92.399429] ibm_acpi: ec object not found
[   92.447684] pcc_acpi: loading...
[   92.874897] acpi-cpufreq: CPU0 - ACPI performance management activated.
[   92.876493] acpi-cpufreq: CPU1 - ACPI performance management activated.
[   95.556983] eth0: no IPv6 routers present
[   96.412622] ppdev: user-space parallel port driver
[   97.222378] rausb0 (WE) : Driver using old /proc/net/wireless support, please fix driver !
[  102.114755] /dev/vmmon[5149]: Module vmmon: registered with major=10 minor=165
[  102.114771] /dev/vmmon[5149]: Module vmmon: initialized
[  102.267325] /dev/vmnet: open called by PID 5177 (vmnet-bridge)
[  102.267338] /dev/vmnet: hub 0 does not exist, allocating memory.
[  102.267353] /dev/vmnet: port on hub 0 successfully opened
[  102.267371] bridge-eth0: enabling the bridge
[  102.267378] bridge-eth0: up
[  102.267387] bridge-eth0: already up
[  102.267391] bridge-eth0: attached
[  102.316754] /dev/vmnet: open called by PID 5191 (vmnet-natd)
[  102.316767] /dev/vmnet: hub 8 does not exist, allocating memory.
[  102.316782] /dev/vmnet: port on hub 8 successfully opened
[  102.511946] Bluetooth: Core ver 2.8
[  102.511953] NET: Registered protocol family 31
[  102.511955] Bluetooth: HCI device and connection manager initialized
[  102.511965] Bluetooth: HCI socket layer initialized
[  102.522210] Bluetooth: L2CAP ver 2.8
[  102.522215] Bluetooth: L2CAP socket layer initialized
[  102.525233] Bluetooth: RFCOMM socket layer initialized
[  102.525248] Bluetooth: RFCOMM TTY layer initialized
[  102.525251] Bluetooth: RFCOMM ver 1.7
[  112.296618] /dev/vmnet: open called by PID 5448 (vmnet-netifup)
[  112.296736] /dev/vmnet: hub 1 does not exist, allocating memory.
[  112.296843] /dev/vmnet: port on hub 1 successfully opened
[  112.296940] /dev/vmnet: open called by PID 5449 (vmnet-netifup)
[  112.297064] /dev/vmnet: port on hub 8 successfully opened
[  112.456009] /dev/vmnet: open called by PID 5475 (vmnet-dhcpd)
[  112.456028] /dev/vmnet: port on hub 8 successfully opened
[  112.457339] /dev/vmnet: open called by PID 5474 (vmnet-dhcpd)
[  112.457354] /dev/vmnet: port on hub 1 successfully opened
[  122.570031] vmnet8: no IPv6 routers present
[  122.729541] vmnet1: no IPv6 routers present
[  223.159810] usb 5-3.3: USB disconnect, address 7
[  223.359724] usb 5-3.3: new low speed USB device using ehci_hcd and address 8
[  223.471053] input: X10 WTI RF receiver as /class/input/input4
[  223.478970] drivers/usb/input/ati_remote.c: Weird data, len=1 ff 00 00 00 00 00 ...
[  228.785853] usb 5-3.3: USB disconnect, address 8
[  228.985766] usb 5-3.3: new low speed USB device using ehci_hcd and address 9
[  229.097083] input: X10 WTI RF receiver as /class/input/input5
[  229.105009] drivers/usb/input/ati_remote.c: Weird data, len=1 ff 00 00 00 00 00 ...
[  359.571385] usb 4-2: new low speed USB device using uhci_hcd and address 2
[  359.748293] input: HID 062a:0000 as /class/input/input6
[  359.748346] input: USB HID v1.10 Mouse [HID 062a:0000] on usb-0000:00:1d.3-2
[  373.954553] ioctl32(vmware-vmx:5784): Unknown cmd fd(170) cmd(40109980){00} arg(ffffaef0) on /proc/bus/usb/005/001
[  374.264354] /dev/vmnet: open called by PID 5784 (vmware-vmx)
[  374.264376] eth0: Promiscuous mode enabled.
[  374.264382] device eth0 entered promiscuous mode
[  374.264384] bridge-eth0: enabled promiscuous mode
[  374.264387] /dev/vmnet: port on hub 0 successfully opened
[  376.320609] drivers/usb/class/usblp.c: usblp0: removed
[  376.408446] /dev/vmmon[5792]: host clock rate change request 0 -> 19
[  382.832687] /dev/vmmon[5792]: host clock rate change request 19 -> 83
[  392.452663] usb 5-3.3: USB disconnect, address 9
[  392.650083] usb 5-3.3: new low speed USB device using ehci_hcd and address 11
[  392.755783] input: X10 WTI RF receiver as /class/input/input7
[  392.763708] drivers/usb/input/ati_remote.c: Weird data, len=1 ff 00 00 00 00 00 ...
[  400.433566] usb 3-1: usbfs: interface 0 claimed by usbfs while 'vmware-vmx' sets config #1
[  411.766611] ibm_acpi: ec object not found
[  506.985903] /dev/vmmon[5792]: host clock rate change request 83 -> 1043
[  540.519739] usb 5-3.3: USB disconnect, address 11
[  540.718405] usb 5-3.3: new low speed USB device using ehci_hcd and address 12
[  540.830968] input: X10 WTI RF receiver as /class/input/input8
[  540.838924] drivers/usb/input/ati_remote.c: Weird data, len=1 ff 00 00 00 00 00 ...
[  918.127370] ati_remote 5-3.3:1.0: Unknown input from channel 0x08: data 82,05
[ 1059.682405] usb 1-1: new full speed USB device using uhci_hcd and address 2
[ 5083.028493] usb 1-1: USB disconnect, address 2
[ 5084.474345] /dev/vmmon[5792]: host clock rate change request 1043 -> 83
[ 6234.894240] /dev/vmmon[5792]: host clock rate change request 83 -> 19
[ 6235.136991] device eth0 left promiscuous mode
[ 6235.137019] bridge-eth0: disabled promiscuous mode
[ 6235.912761] /dev/vmmon[5784]: host clock rate change request 19 -> 0
[ 6235.942322] vmmon: Had to deallocate locked 52105 pages from vm driver ffff81002e042000
[ 6235.945604] vmmon: Had to deallocate AWE 2535 pages from vm driver ffff81002e042000

EDIT : Je suis un newbie ;-) et fonctionne en amd64

cabrito · Le 15/10/2006, à 23:50

Si je saisis bien ta coniguration matérielle, tu as un systéme avec des cartes intégrées en double.

D'après ton dmesg, tu as déjà deux télés analogiques de montées.

Il faudrait faire quelques tests pour voir si elles sont correctement paramétrées. On vera ensuite pour la tnt et le sat.

Quel logiciel utilises-tu pour visionner la télé ?

Dernière modification par cabrito (Le 16/10/2006, à 00:06)

Raphraphou · Le 16/10/2006, à 14:56

Hello,
Oui, c'est exactement ca. J'ai le choix de 2 terrestres, ou 2 TNT, ou un de chaque.
J'ai essayé avec Tvtime mais ca n'a pas l'air de fonctionner.Kaffeine ne voit rien.
Le lien de mes drivers windows (ca en dit bcp plus) :
http://members.chello.be/raphael.genin/TV.zip

Merci bcp,

Raphael

cabrito · Le 16/10/2006, à 15:04

Ouvre un terminal et lance la commande : « tvtime-scanner ».

Tvtime va commencer à scanner le réseau hertzien et repérer toutes les fréquences correspondant à un signal tv analogique (vérifie de bien avoir relié ta carte à une antenne).
Ce prossessus est assez long mais laisse le faire jusqu'au bout puis colle ici ce qu'à renvoyé la commande de scan.

Pour les pilotes windows, c'est une piste à oublier.

Dernière modification par cabrito (Le 16/10/2006, à 15:05)

Raphraphou · Le 16/10/2006, à 15:05

Reading configuration from /etc/tvtime/tvtime.xml
Reading configuration from /home/raphou/.tvtime/tvtime.xml
Scanning using TV standard PAL.
/home/raphou/.tvtime/stationlist.xml: No existing PAL station list "Custom".

No tuner found on input 0. If you have a tuner, please
select a different input using --input=<num>.

Que dois-je faire ?

cabrito · Le 16/10/2006, à 15:24

Essaye : « tvtime-scanner -d /dev/video0 -n secam »

Raphraphou · Le 16/10/2006, à 15:31

ca donne ca :

Reading configuration from /etc/tvtime/tvtime.xml
Reading configuration from /home/raphou/.tvtime/tvtime.xml
Scanning using TV standard SECAM.
/home/raphou/.tvtime/stationlist.xml: No existing SECAM station list "Custom".

No tuner found on input 0. If you have a tuner, please
select a different input using --input=<num>.

cabrito · Le 16/10/2006, à 15:49

que renvoie « ls /dev/vid* »

Raphraphou · Le 16/10/2006, à 17:01

Ceci :

/dev/video /dev/video0 /dev/video1

cabrito · Le 16/10/2006, à 17:21

Bon a priori ta carte est bien installée mais le tuner lui n'est pas chargé en mémoire.
Pour cela il va falloir exercer un choix entre différents tuners possibles.
Pour faciliter cette tache peux tu donner un maximum d'infos sur ta carte : marque, fabricants, vendeur, chipset, etc.
Rajoute aussi la sortie de la commande « lspci -vv »

Raphraphou · Le 16/10/2006, à 17:32

SOrtie de la commande :

0000:00:00.0 Host bridge: Intel Corporation 945G/P Memory Controller Hub (rev 81)
        Subsystem: Intel Corporation 945G/P Memory Controller Hub
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
        Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR-
        Latency: 0
        Capabilities: [e0] #09 [5109]

0000:00:01.0 PCI bridge: Intel Corporation 945G/P PCI Express Graphics Port (rev 81) (prog-if 00 [Normal decode])
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
        Latency: 0, Cache Line Size: 0x08 (32 bytes)
        Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
        I/O behind bridge: 0000d000-0000dfff
        Memory behind bridge: f4000000-fbffffff
        Prefetchable memory behind bridge: 00000000d8000000-00000000dff00000
        BridgeCtl: Parity- SERR- NoISA- VGA+ MAbort- >Reset- FastB2B-
        Capabilities: [88] #0d [0000]
        Capabilities: [80] Power Management version 2
                Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
                Status: D0 PME-Enable- DSel=0 DScale=0 PME-
        Capabilities: [90] Message Signalled Interrupts: 64bit- Queue=0/0 Enable+
                Address: fee00000  Data: 40b9
        Capabilities: [a0] #10 [0141]

0000:00:1b.0 0403: Intel Corporation 82801G (ICH7 Family) High Definition Audio Controller (rev 01)
        Subsystem: Micro-Star International Co., Ltd.: Unknown device 7204
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
        Latency: 0, Cache Line Size: 0x08 (32 bytes)
        Interrupt: pin A routed to IRQ 169
        Region 0: Memory at fdff8000 (64-bit, non-prefetchable) [size=16K]
        Capabilities: [50] Power Management version 2
                Flags: PMEClk- DSI- D1- D2- AuxCurrent=55mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
                Status: D0 PME-Enable- DSel=0 DScale=0 PME-
        Capabilities: [60] Message Signalled Interrupts: 64bit+ Queue=0/0 Enable-
                Address: 0000000000000000  Data: 0000
        Capabilities: [70] #10 [0091]

0000:00:1d.0 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI #1 (rev 01) (prog-if 00 [UHCI])
        Subsystem: Micro-Star International Co., Ltd.: Unknown device 7204
        Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
        Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
        Latency: 0
        Interrupt: pin A routed to IRQ 209
        Region 4: I/O ports at ff00 [size=32]

0000:00:1d.1 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI #2 (rev 01) (prog-if 00 [UHCI])
        Subsystem: Micro-Star International Co., Ltd.: Unknown device 7204
        Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
        Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
        Latency: 0
        Interrupt: pin B routed to IRQ 201
        Region 4: I/O ports at fe00 [size=32]

0000:00:1d.2 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI #3 (rev 01) (prog-if 00 [UHCI])
        Subsystem: Micro-Star International Co., Ltd.: Unknown device 7204
        Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
        Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
        Latency: 0
        Interrupt: pin C routed to IRQ 193
        Region 4: I/O ports at fd00 [size=32]

0000:00:1d.3 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI #4 (rev 01) (prog-if 00 [UHCI])
        Subsystem: Micro-Star International Co., Ltd.: Unknown device 7204
        Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
        Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
        Latency: 0
        Interrupt: pin D routed to IRQ 169
        Region 4: I/O ports at fc00 [size=32]

0000:00:1d.7 USB Controller: Intel Corporation 82801G (ICH7 Family) USB2 EHCI Controller (rev 01) (prog-if 20 [EHCI])
        Subsystem: Micro-Star International Co., Ltd.: Unknown device 7204
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
        Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
        Latency: 0
        Interrupt: pin A routed to IRQ 209
        Region 0: Memory at fdfff000 (32-bit, non-prefetchable) [size=1K]
        Capabilities: [50] Power Management version 2
                Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
                Status: D0 PME-Enable- DSel=0 DScale=0 PME-

0000:00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev e1) (prog-if 01 [Subtractive decode])
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
        Latency: 0
        Bus: primary=00, secondary=02, subordinate=02, sec-latency=32
        I/O behind bridge: 0000e000-0000efff
        Memory behind bridge: fde00000-fdefffff
        Prefetchable memory behind bridge: 00000000fdd00000-00000000fdd00000
        BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
        Capabilities: [50] #0d [0000]

0000:00:1f.0 ISA bridge: Intel Corporation 82801GB/GR (ICH7 Family) LPC Interface Bridge (rev 01)
        Subsystem: Intel Corporation 82801GB/GR (ICH7 Family) LPC Interface Bridge
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
        Latency: 0
        Capabilities: [e0] #09 [100c]

0000:00:1f.1 IDE interface: Intel Corporation 82801G (ICH7 Family) IDE Controller (rev 01) (prog-if 8a [Master SecP PriP])
        Subsystem: Micro-Star International Co., Ltd.: Unknown device 7204
        Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
        Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
        Latency: 0
        Interrupt: pin A routed to IRQ 193
        Region 0: I/O ports at <unassigned>
        Region 1: I/O ports at <unassigned>
        Region 2: I/O ports at <unassigned>
        Region 3: I/O ports at <unassigned>
        Region 4: I/O ports at fb00 [size=16]

0000:00:1f.2 IDE interface: Intel Corporation 82801GB/GR/GH (ICH7 Family) Serial ATA Storage Controllers cc=IDE (rev 01) (prog-if 8f [Master SecP SecO PriP PriO])
        Subsystem: Micro-Star International Co., Ltd.: Unknown device 7204
        Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
        Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
        Latency: 0
        Interrupt: pin B routed to IRQ 201
        Region 0: I/O ports at fa00 [size=8]
        Region 1: I/O ports at f900 [size=4]
        Region 2: I/O ports at f800 [size=8]
        Region 3: I/O ports at f700 [size=4]
        Region 4: I/O ports at f600 [size=16]
        Capabilities: [70] Power Management version 2
                Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot+,D3cold-)
                Status: D0 PME-Enable- DSel=0 DScale=0 PME-

0000:00:1f.3 SMBus: Intel Corporation 82801G (ICH7 Family) SMBus Controller (rev 01)
        Subsystem: Micro-Star International Co., Ltd.: Unknown device 7204
        Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
        Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
        Interrupt: pin B routed to IRQ 10
        Region 4: I/O ports at 0500 [size=32]

0000:01:00.0 VGA compatible controller: nVidia Corporation: Unknown device 0147 (rev a2) (prog-if 00 [VGA])
        Subsystem: Micro-Star International Co., Ltd.: Unknown device 0350
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
        Latency: 0
        Interrupt: pin A routed to IRQ 169
        Region 0: Memory at f4000000 (32-bit, non-prefetchable) [size=64M]
        Region 1: Memory at d8000000 (64-bit, prefetchable) [size=128M]
        Region 3: Memory at fa000000 (64-bit, non-prefetchable) [size=16M]
        Expansion ROM at f8000000 [disabled] [size=128K]
        Capabilities: [60] Power Management version 2
                Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
                Status: D0 PME-Enable- DSel=0 DScale=0 PME-
        Capabilities: [68] Message Signalled Interrupts: 64bit+ Queue=0/0 Enable-
                Address: 0000000000000000  Data: 0000
        Capabilities: [78] #10 [0001]

0000:02:01.0 Multimedia controller: Philips Semiconductors SAA7133 Video Broadcast Decoder (rev d1)
        Subsystem: Creatix Polymedia GmbH: Unknown device 0007
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
        Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
        Latency: 32 (21000ns min, 8000ns max)
        Interrupt: pin A routed to IRQ 217
        Region 0: Memory at fdeff000 (32-bit, non-prefetchable) [size=2K]
        Capabilities: [40] Power Management version 2
                Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
                Status: D0 PME-Enable- DSel=0 DScale=1 PME-

0000:02:02.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10)
        Subsystem: Micro-Star International Co., Ltd.: Unknown device 204c
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
        Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
        Latency: 32 (8000ns min, 16000ns max)
        Interrupt: pin A routed to IRQ 193
        Region 0: I/O ports at ec00 [size=256]
        Region 1: Memory at fdefe000 (32-bit, non-prefetchable) [size=256]
        Expansion ROM at fdd00000 [disabled] [size=64K]
        Capabilities: [50] Power Management version 2
                Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0-,D1+,D2+,D3hot+,D3cold+)
                Status: D0 PME-Enable- DSel=0 DScale=0 PME-

0000:02:03.0 FireWire (IEEE 1394): VIA Technologies, Inc. IEEE 1394 Host Controller (rev 80) (prog-if 10 [OHCI])
        Subsystem: Micro-Star International Co., Ltd.: Unknown device 204d
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping+ SERR- FastB2B-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
        Latency: 32 (8000ns max), Cache Line Size: 0x08 (32 bytes)
        Interrupt: pin A routed to IRQ 201
        Region 0: Memory at fdefd000 (32-bit, non-prefetchable) [size=2K]
        Region 1: I/O ports at ef00 [size=128]
        Capabilities: [50] Power Management version 2
                Flags: PMEClk- DSI- D1- D2+ AuxCurrent=0mA PME(D0-,D1-,D2+,D3hot+,D3cold+)
                Status: D0 PME-Enable- DSel=0 DScale=0 PME-

0000:02:04.0 Multimedia controller: Philips Semiconductors SAA7133 Video Broadcast Decoder (rev d1)
        Subsystem: Creatix Polymedia GmbH: Unknown device 0008
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
        Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
        Latency: 32 (21000ns min, 8000ns max)
        Interrupt: pin A routed to IRQ 225
        Region 0: Memory at fdefc000 (32-bit, non-prefetchable) [size=2K]
        Capabilities: [40] Power Management version 2
                Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
                Status: D0 PME-Enable- DSel=0 DScale=1 PME-

0000:02:05.0 Communication controller: Agere Systems: Unknown device 0620
        Subsystem: Agere Systems: Unknown device 0620
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
        Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
        Latency: 32
        Interrupt: pin A routed to IRQ 9
        Region 0: I/O ports at ea00 [size=256]
        Capabilities: [f8] Power Management version 3
                Flags: PMEClk- DSI+ D1- D2- AuxCurrent=55mA PME(D0-,D1-,D2-,D3hot+,D3cold+)
                Status: D0 PME-Enable- DSel=0 DScale=0 PME-

Et la carte (setup information Windows):

; Copyright 2005, Philips Semiconductors GmbH

[Version]
signature="$CHICAGO$" ;all windows os
Class=MEDIA
ClassGUID={4d36e96c-e325-11ce-bfc1-08002be10318}
Provider=%PSH%
DriverVer=10/17/2005,1.3.3.0
CatalogFile=34AVStrm.cat

[Manufacturer]
%PSH%=Philips

[Philips]
%34Hybrid.DeviceDesc%=3xHybrid,PCI\VEN_1131&DEV_7134&SUBSYS_000316BE
%34aHybrid.DeviceDesc%=3xHybrid_DVBS,PCI\VEN_1131&DEV_7134&SUBSYS_000516BE
%33Hybrid.DeviceDesc%=3xHybrid,PCI\VEN_1131&DEV_7133&SUBSYS_000616BE
%33aHybrid.DeviceDesc%=3xHybrid,PCI\VEN_1131&DEV_7133&SUBSYS_000716BE
%33bHybrid.DeviceDesc%=3xHybrid,PCI\VEN_1131&DEV_7133&SUBSYS_000816BE


[DestinationDirs]
3xHybrid.CopyCoInst=11
3xHybrid.CopyFiles=10,system32\drivers ; be aware not to use 12 as the drivers directory, 
                                       ; as driver will not work anymore in W98

[SourceDisksNames]
1 = %AVSTRM_INSTALLATION_DISK%,,

[SourceDisksFiles]
34CoInstaller.dll=1
3xHybrid.sys=1

[3xHybrid.CopyCoInst]
34CoInstaller.dll

[3xHybrid.CopyFiles]
3xHybrid.sys

;
;*** initialization and registry entries
;

[3xHybrid.CoInstallers]
CopyFiles = 3xHybrid.CopyCoInst
AddReg = 3xHybrid.CoInstaller_AddReg

[3xHybridDVB_S.CoInstallers]
CopyFiles = 3xHybrid.CopyCoInst
AddReg = 3xHybrid.CoInstaller_AddReg

[3xHybrid.ntx86.CoInstallers]
CopyFiles = 3xHybrid.CopyCoInst
AddReg = 3xHybrid.CoInstaller_AddReg

[3xHybrid_DVBS.ntx86.CoInstallers]
CopyFiles = 3xHybrid.CopyCoInst
AddReg = 3xHybrid.CoInstaller_AddReg

[3xHybrid.CoInstaller_AddReg]
HKR,,CoInstallers32,0x00010000,"34CoInstaller.dll, CoInstallerEntry"

[3xHybrid]
AlsoInstall=KS.Registration(ks.inf), WDMAUDIO.Registration(wdmaudio.inf), KSCAPTUR.Registration(kscaptur.inf), BDA.Installation(bda.inf)
CopyFiles=3xHybrid.CopyFiles
AddReg=3xHybrid.AddReg

[3xHybrid_DVBS]
AlsoInstall=KS.Registration(ks.inf), WDMAUDIO.Registration(wdmaudio.inf), KSCAPTUR.Registration(kscaptur.inf), BDA.Installation(bda.inf)
CopyFiles=3xHybrid.CopyFiles
AddReg=3xHybrid.AddReg, 3xHybrid_DVBS.AddReg

[3xHybrid.ntx86]
Include=ks.inf, wdmaudio.inf, kscaptur.inf, bda.inf
Needs=KS.Registration.NT, WDMAUDIO.Registration.NT, KSCAPTUR.Registration.NT, BDA.Installation.NT
CopyFiles=3xHybrid.CopyFiles
AddReg=3xHybrid.AddReg

[3xHybrid_DVBS.ntx86]
Include=ks.inf, wdmaudio.inf, kscaptur.inf, bda.inf
Needs=KS.Registration.NT, WDMAUDIO.Registration.NT, KSCAPTUR.Registration.NT, BDA.Installation.NT
CopyFiles=3xHybrid.CopyFiles
AddReg=3xHybrid.AddReg, 3xHybrid_DVBS.AddReg

[3xHybrid.Services]
AddService=3xHybrid, 0x00000002, 3xHybrid.ServiceInstall

[3xHybrid_DVBS.Services]
AddService=3xHybrid, 0x00000002, 3xHybrid.ServiceInstall

[3xHybrid.ntx86.Services]
AddService=3xHybrid, 0x00000002, 3xHybrid.ServiceInstall

[3xHybrid_DVBS.ntx86.Services]
AddService=3xHybrid, 0x00000002, 3xHybrid.ServiceInstall

[3xHybrid.ServiceInstall]
DisplayName=%DISPLAY_NAME%
Description=%SERVICE_DESCRIPTION%
ServiceType=%SERVICE_KERNEL_DRIVER%
StartType=%SERVICE_DEMAND_START%
ErrorControl=%SERVICE_ERROR_IGNORE%
ServiceBinary=%12%\3xHybrid.sys
; [StartName=driver-object-name]
; [AddReg=add-registry-section[, add-registry-section] ...]
; [DelReg=del-registry-section[, del-registry-section] ...]
; [BitReg=bit-registry-section[,bit-registry-section] ...]
; [LoadOrderGroup=load-order-group-name]
; [Dependencies=depend-on-item-name[,depend-on-item-name]...]

[3xHybrid_DVBS.AddReg]
HKR, "Parameters", "AnalogPath",0x00010001,0x00

[3xHybrid.AddReg]
HKR,,DevLoader,,*NTKERN
HKR,,NTMPDriver,,3xHybrid.sys

; audio capture registry entries

HKR,,AssociatedFilters,,"wdmaud,swmidi,redbook"
HKR,,Driver,,3xHybrid.SYS

HKR,Drivers,SubClasses,,"wave,mixer"

HKR,Drivers\wave\wdmaud.drv,Driver,,wdmaud.drv
HKR,Drivers\mixer\wdmaud.drv,Driver,,wdmaud.drv

HKR,Drivers\wave\wdmaud.drv,Description,,"Europa audio capture device"
HKR,Drivers\mixer\wdmaud.drv,Description,,"Europa audio capture device"


; under MCE, IgnoreDVBParameter=1, prevents the driver to use the DShow DVB properties.
; -1 is used instead
HKR, "Parameters", "IgnoreDVBParameter",0x00010001,0x01


; under MCE, AutoRemove60HzStd fixes the 1st run problem with analog multi standard tuner
; like the TDA8275A. In countries with 50Hz formats, 60Hz formats are beeing removed
HKR, "Parameters", "AutoRemove60HzStd",0x00010001,0x01


; removes 2nd pair of video inputs 
HKR, "Parameters", "SmallXBar",0x00010001,0x01

; enables video blanking of TDA8275A during channel change 
HKR, "Parameters", "BlankVideo",0x00010001,0x01


; add audio input and output pinnames

HKLM,SYSTEM\CurrentControlSet\Control\MediaCategories\%VAMP_ANLG_AUDIO_IN_PIN%,"Name",,"Analog Audioinput"
HKLM,SYSTEM\CurrentControlSet\Control\MediaCategories\%VAMP_ANLG_AUDIO_OUT_PIN%,"Name",,"Audio"
HKLM,SYSTEM\CurrentControlSet\Control\MediaCategories\%VAMP_ANLG_VIDEO_ITU_PIN%,"Name",,"Analog ITU Video"
HKLM,SYSTEM\CurrentControlSet\Control\MediaCategories\%VAMP_ANLG_AUDIO_I2S_PIN%,"Name",,"I2S Audio"
HKLM,SYSTEM\CurrentControlSet\Control\MediaCategories\%VAMP_MPEG_AES_PIN%,"Name",,"MPEG Audio ES"
HKLM,SYSTEM\CurrentControlSet\Control\MediaCategories\%VAMP_MPEG_VES_PIN%,"Name",,"MPEG Video ES"
HKLM,SYSTEM\CurrentControlSet\Control\MediaCategories\%VAMP_MPEG_PS_PIN%,"Name",, "MPEG2 Program"

;
;*** strings, GUIDs and names
;

[Strings]

; Proxy GUIDs

KSProxy.CLSID   = "{17CCA71B-ECD7-11D0-B908-00A0C9223196}"
KSXBar.CLSID    = "{71F96460-78F3-11d0-A18C-00A0C9118956}"
KSTVAudio.CLSID = "{71F96462-78F3-11d0-A18C-00A0C9118956}"
KSTvTune.CLSID  = "{266EEE40-6C63-11cf-8A03-00AA006ECB65}"

; Category GUIDs

KSCATEGORY_CAPTURE       = "{65E8773D-8F56-11D0-A3B9-00A0C9223196}"
KSCATEGORY_VIDEO         = "{6994AD05-93EF-11D0-A3CC-00A0C9223196}"
KSCATEGORY_AUDIO         = "{6994AD04-93EF-11D0-A3CC-00A0C9223196}"

; Our Pin Name GUIDs

VAMP_ANLG_AUDIO_IN_PIN   = "{7BB284B9-714D-493d-A101-B1B028E782BD}"
VAMP_ANLG_AUDIO_OUT_PIN  = "{5582E657-E596-42b5-9DB3-541B27A2355F}"
VAMP_ANLG_AUDIO_I2S_PIN  = "{C2E46358-F032-4d88-B802-06B59D162730}"
VAMP_ANLG_VIDEO_ITU_PIN  = "{82631A2E-403C-4581-A4B0-EC173D004410}"

VAMP_MPEG_AES_PIN        = "{9DEC84B9-BCEF-4aac-997E-43EDD0A2D6C7}"
VAMP_MPEG_VES_PIN        = "{181CF87E-7741-47ba-8629-22347E03C64C}"
VAMP_MPEG_PS_PIN         = "{DDA87B83-65DB-4aec-82D0-79FBE67D2BB6}"

; Our Filter GUIDs

VAMP_ANLG_AUDIO_FILTER   = "{F3B951E7-8619-4ff3-91CA-03910E4BB900}"
VAMP_ANLG_CAP_FILTER     = "{BBEFB6C7-2FC4-4139-BB8B-A58BBA724000}"

; system defines

SERVICE_BOOT_START     = 0x0 
SERVICE_SYSTEM_START   = 0x1 
SERVICE_AUTO_START     = 0x2 
SERVICE_DEMAND_START   = 0x3 
SERVICE_DISABLED       = 0x4 

SERVICE_KERNEL_DRIVER  = 0x1 
SERVICE_ERROR_IGNORE   = 0x0 
SERVICE_ERROR_NORMAL   = 0x1 
SERVICE_ERROR_SEVERE   = 0x2
SERVICE_ERROR_CRITICAL = 0x3 

FLG_REGSVR_DLLREGISTER = 0x00000001

;Our strings

PSH="Philips"
30Hybrid.DeviceDesc      = "Medion SAA7130, Hybrid Capture Device"
34Hybrid.DeviceDesc      = "Medion SAA7134, Hybrid Capture Device"
34aHybrid.DeviceDesc      = "Medion SAA7134 DVBS, Hybrid Capture Device"
33Hybrid.DeviceDesc      = "Medion SAA7133/35, Hybrid Capture Device"
33aHybrid.DeviceDesc      = "Medion SAA7131, Hybrid Capture Device 1"
33bHybrid.DeviceDesc      = "Medion SAA7131, Hybrid Capture Device 2"
AVSTRM_INSTALLATION_DISK = "3xHybrid installation disk"
DISPLAY_NAME             = "3xHybrid service"
SERVICE_DESCRIPTION      = "The Europa capture driver"

cabrito · Le 16/10/2006, à 18:05

Il va falloir recharger le module saa7134 avec de nouveaux paramètres.

Il faut d'abord décharger le module pour pouvoir le recharger avec les nouveaux paramètres :

sudo modprobe -r saa7134
sudo modprobe saa7134 card=96 secam=l

ensuite renvois ici la fin de ton dmesg
et essaye « tvtime-scanner -n secam »

Dernière modification par cabrito (Le 17/10/2006, à 00:41)

Raphraphou · Le 17/10/2006, à 00:07

Voilà ce que j'ai fait :
raphou@raphou-desktop:~$ sudo modprobe - r saa7134

Il m'a alors dit :
FATAL: Module _ not found.

J'ai rééssayé
raphou@raphou-desktop:~$ sudo modprobe - r saa7134
FATAL: Module _ not found.

J'ai quand même fait cette commande:
raphou@raphou-desktop:~$ sudo modprobe saa7134 card=96 secam=l

Puis:
raphou@raphou-desktop:~$ tvtime-scanner -n secam

MAIS:
Reading configuration from /etc/tvtime/tvtime.xml
Reading configuration from /home/raphou/.tvtime/tvtime.xml
Scanning using TV standard SECAM.
/home/raphou/.tvtime/stationlist.xml: No existing SECAM station list "Custom".

No tuner found on input 0. If you have a tuner, please
select a different input using --input=<num>.

Aie aie aie

cabrito · Le 17/10/2006, à 00:43

désolé, j'ai fais une faute de frappe il n'y a pas d'espace entre le - et le r dans la commande.
Donc :

sudo modprobe -r saa7134
sudo modprobe saa7134 card=96 secam=l

Dernière modification par cabrito (Le 17/10/2006, à 00:44)

Raphraphou · Le 17/10/2006, à 00:46

FATAL: Module saa7134 is in use.

cabrito · Le 17/10/2006, à 00:58

essaye d'abord « sudo modprobe -r saa7134-alsa » puis saa7134

Raphraphou · Le 17/10/2006, à 12:13

FATAL: Module saa7134_alsa is in use.

cabrito · Le 17/10/2006, à 12:54

dans ce cas là je pense que pour faire les tests le mieux est de blacklister le module saa7134 pour qu'il ne soit pas chargé au démarrage et pouvoir par la suite lui affubler les paramètres désirés.

Pour le blacklister il faut rajouter « blacklist saa7134 » au fichier /etc/modprobe.d/blacklist ce que tu peux faire avec :

 echo blacklist saa7134 | sudo tee -a /etc/modprobe.d/blacklist

ensuite redémarre ton ordi et vérifie que saa7134 ne soit pas chargé : lsmod | grep saa
puis charge le avec les options précédentes

Dernière modification par cabrito (Le 17/10/2006, à 12:55)

Raphraphou · Le 17/10/2006, à 14:05

J'ai fait

 echo blacklist saa7134 | sudo tee -a /etc/modprobe.d/blacklist

puis redémarrage

Ensuite

lsmod | grep saa

Ok, y a rien qui s'affiche

Ensuite

sudo modprobe -r saa7134

Ok, y a rien qui s'affiche

Mais en faisant :

sudo modprobe saa7134 card=96 secam=l

Ya ca qui s'affiche

FATAL: Error inserting saa7134 (/lib/modules/2.6.15-27-amd64-generic/kernel/drivers/media/video/saa7134/saa7134.ko): Unknown symbol in module, or unknown parameter (see dmesg)
FATAL: Error running install command for saa7134

Aie ?

cabrito · Le 17/10/2006, à 14:24

Vérifie que le module saa7134 est déchargé puis essaye :
sudo modprobe tuner secam=l
sudo modprobe saa7134 card=96

Raphraphou · Le 17/10/2006, à 16:10

J'ai fait les opérations citées mais rien n'apparait sur le terminal ?

cabrito · Le 17/10/2006, à 16:16

donne ton dmesg

Raphraphou · Le 17/10/2006, à 16:19

[    0.000000] BIOS-provided physical RAM map:
[    0.000000]  BIOS-e820: 0000000000000000 - 000000000009f000 (usable)
[    0.000000]  BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved)
[    0.000000]  BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[    0.000000]  BIOS-e820: 0000000000100000 - 000000003fee0000 (usable)
[    0.000000]  BIOS-e820: 000000003fee0000 - 000000003fee3000 (ACPI NVS)
[    0.000000]  BIOS-e820: 000000003fee3000 - 000000003fef0000 (ACPI data)
[    0.000000]  BIOS-e820: 000000003fef0000 - 000000003ff00000 (reserved)
[    0.000000]  BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
[    0.000000]  BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
[    0.000000] ACPI: RSDP (v000 IntelR                                ) @ 0x00000000000f8dd0
[    0.000000] ACPI: RSDT (v001 IntelR AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x000000003fee3040
[    0.000000] ACPI: FADT (v001 IntelR AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x000000003fee30c0
[    0.000000] ACPI: MCFG (v001 IntelR AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x000000003fee7b80
[    0.000000] ACPI: MADT (v001 IntelR AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x000000003fee7a80
[    0.000000] ACPI: SSDT (v001  PmRef  Cpu0Ist 0x00003000 INTL 0x20041203) @ 0x000000003fee7c00
[    0.000000] ACPI: SSDT (v001  PmRef    CpuPm 0x00003000 INTL 0x20041203) @ 0x000000003fee8090
[    0.000000] ACPI: DSDT (v001 INTELR AWRDACPI 0x00001000 MSFT 0x0100000e) @ 0x0000000000000000
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at 0000000000000000-000000003fee0000
[    0.000000] Bootmem setup node 0 0000000000000000-000000003fee0000
[    0.000000] On node 0 totalpages: 257251
[    0.000000]   DMA zone: 3015 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 254236 pages, LIFO batch:31
[    0.000000]   Normal zone: 0 pages, LIFO batch:0
[    0.000000]   HighMem zone: 0 pages, LIFO batch:0
[    0.000000] ACPI: PM-Timer IO Port: 0x408
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[    0.000000] Processor #0 15:4 APIC version 20
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[    0.000000] Processor #1 15:4 APIC version 20
[    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] disabled)
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[    0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 4, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Setting APIC routing to physical flat
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] Allocating PCI resources starting at 40000000 (gap: 3ff00000:a0100000)
[    0.000000] Checking aperture...
[    0.000000] SMP: Allowing 4 CPUs, 2 hotplug CPUs
[    0.000000] Built 1 zonelists
[    0.000000] Kernel command line: root=/dev/sda1 ro quiet splash
[    0.000000] Initializing CPU#0
[    0.000000] PID hash table entries: 4096 (order: 12, 131072 bytes)
[    0.000000] time.c: Using 3.579545 MHz PM timer.
[    0.000000] time.c: Detected 2999.814 MHz processor.
[   43.698012] Console: colour VGA+ 80x25
[   43.698633] Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes)
[   43.699260] Inode-cache hash table entries: 65536 (order: 7, 524288 bytes)
[   43.708209] Memory: 1020056k/1047424k available (2151k kernel code, 26980k reserved, 757k data, 180k init)
[   43.786198] Calibrating delay using timer specific routine.. 6009.00 BogoMIPS (lpj=12018001)
[   43.786268] Security Framework v1.0.0 initialized
[   43.786272] SELinux:  Disabled at boot.
[   43.786296] Mount-cache hash table entries: 256
[   43.786416] CPU: Trace cache: 12K uops, L1 D cache: 16K
[   43.786420] CPU: L2 cache: 1024K
[   43.786422] using mwait in idle threads.
[   43.786425] CPU: Physical Processor ID: 0
[   43.786427] CPU: Processor Core ID: 0
[   43.786437] CPU0: Thermal monitoring enabled (TM1)
[   43.786441] mtrr: v2.0 (20020519)
[   43.786451] SMP alternatives: switching to UP code
[   43.786678] checking if image is initramfs... it is
[   44.492172] Freeing initrd memory: 7098k freed
[   44.496951] ACPI: Looking for DSDT ... not found!
[   44.542480] Using local APIC timer interrupts.
[   44.575785] Detected 12.499 MHz APIC timer.
[   44.575906] SMP alternatives: switching to SMP code
[   44.576026] Booting processor 1/2 APIC 0x1
[   44.586425] Initializing CPU#1
[   44.665284] Calibrating delay using timer specific routine.. 5999.79 BogoMIPS (lpj=11999591)
[   44.665295] CPU: Trace cache: 12K uops, L1 D cache: 16K
[   44.665297] CPU: L2 cache: 1024K
[   44.665300] CPU: Physical Processor ID: 0
[   44.665302] CPU: Processor Core ID: 1
[   44.665313] CPU1: Thermal monitoring enabled (TM1)
[   44.665523]               Intel(R) Pentium(R) D CPU 3.00GHz stepping 04
[   44.665531] APIC error on CPU1: 00(40)
[   44.665534] CPU 1: Syncing TSC to CPU 0.
[   44.665750] CPU 1: synchronized TSC with CPU 0 (last diff 43 cycles, maxerr 1508 cycles)
[   44.665768] Brought up 2 CPUs
[   44.665802] time.c: Using PIT/TSC based timekeeping.
[   44.665804] testing NMI watchdog ... OK.
[   44.706202] NET: Registered protocol family 16
[   44.706232] ACPI: bus type pci registered
[   44.706238] PCI: Using configuration type 1
[   44.712084] PCI: Using MMCONFIG at e0000000
[   44.712121] mtrr: your CPUs had inconsistent variable MTRR settings
[   44.712123] mtrr: probably your BIOS does not setup all CPUs.
[   44.712125] mtrr: corrected configuration.
[   44.712858] ACPI: Subsystem revision 20051216
[   44.718001] ACPI: Interpreter enabled
[   44.718004] ACPI: Using IOAPIC for interrupt routing
[   44.718820] ACPI: PCI Root Bridge [PCI0] (0000:00)
[   44.718824] PCI: Probing PCI hardware (bus 00)
[   44.721887] PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1
[   44.722024] Boot video device is 0000:01:00.0
[   44.722344] PCI: Transparent bridge - 0000:00:1e.0
[   44.722382] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[   44.737882] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
[   44.742995] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 7 9 10 *11 12 14 15)
[   44.743331] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 7 9 10 *11 12 14 15)
[   44.743670] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 7 *9 10 11 12 14 15)
[   44.744010] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 7 9 *10 11 12 14 15)
[   44.744346] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 7 9 *10 11 12 14 15)
[   44.744681] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 7 *9 10 11 12 14 15)
[   44.745016] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 7 9 10 11 12 14 15) *0, disabled.
[   44.745360] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 7 9 10 *11 12 14 15)
[   44.745691] Linux Plug and Play Support v0.97 (c) Adam Belay
[   44.745701] pnp: PnP ACPI init
[   44.750973] pnp: PnP ACPI: found 13 devices
[   44.750991] PCI: Using ACPI for IRQ routing
[   44.750995] PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
[   44.751112] PCI-DMA: Disabling IOMMU.
[   44.751719] pnp: 00:09: ioport range 0x400-0x4bf could not be reserved
[   44.751963] PCI: Bridge: 0000:00:01.0
[   44.751966]   IO window: d000-dfff
[   44.751969]   MEM window: f4000000-fbffffff
[   44.751972]   PREFETCH window: d8000000-dfffffff
[   44.751976] PCI: Bridge: 0000:00:1e.0
[   44.751978]   IO window: e000-efff
[   44.751982]   MEM window: fde00000-fdefffff
[   44.751986]   PREFETCH window: fdd00000-fddfffff
[   44.751996] GSI 16 sharing vector 0xA9 and IRQ 16
[   44.751999] ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 169
[   44.752004] PCI: Setting latency timer of device 0000:00:01.0 to 64
[   44.752012] PCI: Setting latency timer of device 0000:00:1e.0 to 64
[   44.752588] IA32 emulation $Id: sys_ia32.c,v 1.32 2002/03/24 13:02:28 ak Exp $
[   44.753122] audit: initializing netlink socket (disabled)
[   44.753136] audit(1161086333.056:1): initialized
[   44.753357] VFS: Disk quotas dquot_6.5.1
[   44.753379] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[   44.753456] Initializing Cryptographic API
[   44.753460] io scheduler noop registered
[   44.753483] io scheduler anticipatory registered
[   44.753501] io scheduler deadline registered
[   44.753551] io scheduler cfq registered
[   44.754450] ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 169
[   44.754457] PCI: Setting latency timer of device 0000:00:01.0 to 64
[   44.754474] assign_interrupt_mode Found MSI capability
[   44.754512] Allocate Port Service[pcie00]
[   44.754556] Allocate Port Service[pcie03]
[   44.776287] Real Time Clock Driver v1.12
[   44.776344] Linux agpgart interface v0.101 (c) Dave Jones
[   44.776564] PNP: No PS/2 controller found. Probing ports directly.
[   45.277689] i8042.c: Can't read CTR while initializing i8042.
[   45.277730] Serial: 8250/16550 driver $Revision: 1.90 $ 48 ports, IRQ sharing enabled
[   45.277869] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[   45.277992] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[   45.280783] 00:06: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[   45.280971] 00:07: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[   45.281628] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[   45.281690] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[   45.281694] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[   45.281892] mice: PS/2 mouse device common for all mice
[   45.282037] NET: Registered protocol family 2
[   45.333206] IP route cache hash table entries: 32768 (order: 6, 262144 bytes)
[   45.333502] TCP established hash table entries: 131072 (order: 9, 2097152 bytes)
[   45.334504] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[   45.335085] TCP: Hash tables configured (established 131072 bind 65536)
[   45.335089] TCP reno registered
[   45.335220] TCP bic registered
[   45.335241] NET: Registered protocol family 1
[   45.335249] NET: Registered protocol family 8
[   45.335250] NET: Registered protocol family 20
[   45.335395] ACPI wakeup devices:
[   45.335403] SLPB PCI0 PEX0 PEX1 PEX2 PEX3 HUB0 UAR1 UAR2 USB0 USB1 USB2 USB3 USBE AC97 AZAL
[   45.335415] ACPI: (supports S0 S3 S4 S5)
[   45.335502] Freeing unused kernel memory: 180k freed
[   45.383719] vga16fb: initializing
[   45.383723] vga16fb: mapped to 0xffff8100000a0000
[   45.591846] Console: switching to colour frame buffer device 80x25
[   45.591852] fb0: VGA16 VGA frame buffer device
[   46.627358] Capability LSM initialized
[   46.702354] ACPI: Fan [FAN] (on)
[   46.707712] ACPI: Thermal Zone [THRM] (65 C)
[   47.239094] ICH7: IDE controller at PCI slot 0000:00:1f.1
[   47.239107] GSI 17 sharing vector 0xC1 and IRQ 17
[   47.239111] ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 193
[   47.239121] ICH7: chipset revision 1
[   47.239123] ICH7: not 100% native mode: will probe irqs later
[   47.239134]     ide0: BM-DMA at 0xfb00-0xfb07, BIOS settings: hda:DMA, hdb:DMA
[   47.239148] Probing IDE interface ide0...
[   47.975249] hda: SONY DVD RW DW-Q31A, ATAPI CD/DVD-ROM drive
[   48.758427] hdb: SONY DVD-ROM DDU1615, ATAPI CD/DVD-ROM drive
[   48.814587] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[   48.837357] hda: ATAPI 48X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache, UDMA(33)
[   48.837368] Uniform CD-ROM driver Revision: 3.20
[   48.840230] hdb: ATAPI 40X DVD-ROM drive, 254kB Cache, UDMA(33)
[   48.870756] SCSI subsystem initialized
[   48.872309] ACPI: bus type scsi registered
[   48.872312] libata version 1.20 loaded.
[   48.873446] ata_piix 0000:00:1f.2: version 1.05
[   48.873455] ata_pci_init_one: pci_dev class+intf: 0x1018f
[   48.873457] ata_pci_init_one: NO_LEGACY == 0
[   48.873476] GSI 18 sharing vector 0xC9 and IRQ 18
[   48.873480] ACPI: PCI Interrupt 0000:00:1f.2[b] -> GSI 19 (level, low) -> IRQ 201
[   48.873491] PCI: Setting latency timer of device 0000:00:1f.2 to 64
[   48.873544] ata1: PATA max UDMA/133 cmd 0xFA00 ctl 0xF902 bmdma 0xF600 irq 201
[   48.873571] ata2: PATA max UDMA/133 cmd 0xF800 ctl 0xF702 bmdma 0xF608 irq 201
[   49.038436] ata1: dev 0 cfg 00:0c5a 49:2f00 82:346b 83:7d01 84:4023 85:3469 86:3c01 87:4023 88:207f 93:0000
[   49.038441] ata1: dev 0 ATA-7, max UDMA/133, 488397168 sectors: LBA48
[   49.039604] sata_get_dev_handle: SATA dev addr=0x1f0002, handle=0xffff810037fdacc0
[   49.044606] ata1: dev 0 configured for UDMA/133
[   49.045665] sata_get_dev_handle: SATA dev addr=0x1f0002, handle=0xffff810037fdacc0
[   49.050520] scsi0 : ata_piix
[   50.225869] ata2: disabling port
[   50.225873] scsi1 : ata_piix
[   50.226002]   Vendor: ATA       Model: ST3250823AS       Rev: 3.03
[   50.226016]   Type:   Direct-Access                      ANSI SCSI revision: 05
[   50.232519] Driver 'sd' needs updating - please use bus_type methods
[   50.232599] SCSI device sda: 488397168 512-byte hdwr sectors (250059 MB)
[   50.232624] SCSI device sda: drive cache: write back
[   50.232682] SCSI device sda: 488397168 512-byte hdwr sectors (250059 MB)
[   50.232705] SCSI device sda: drive cache: write back
[   50.232711]  sda: sda1 sda2 sda3 sda4 < sda5 >
[   50.278219] sd 0:0:0:0: Attached scsi disk sda
[   50.605521] usbcore: registered new driver usbfs
[   50.605541] usbcore: registered new driver hub
[   50.606451] USB Universal Host Controller Interface driver v2.3
[   50.606500] GSI 19 sharing vector 0xD1 and IRQ 19
[   50.606504] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 209
[   50.606514] PCI: Setting latency timer of device 0000:00:1d.0 to 64
[   50.606517] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[   50.606802] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
[   50.606812] uhci_hcd 0000:00:1d.0: irq 209, io base 0x0000ff00
[   50.606919] hub 1-0:1.0: USB hub found
[   50.606926] hub 1-0:1.0: 2 ports detected
[   50.637331] ieee1394: Initialized config rom entry `ip1394'
[   50.709159] ACPI: PCI Interrupt 0000:00:1d.1[b] -> GSI 19 (level, low) -> IRQ 201
[   50.709172] PCI: Setting latency timer of device 0000:00:1d.1 to 64
[   50.709175] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[   50.709297] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
[   50.709305] uhci_hcd 0000:00:1d.1: irq 201, io base 0x0000fe00
[   50.709575] hub 2-0:1.0: USB hub found
[   50.709582] hub 2-0:1.0: 2 ports detected
[   50.813016] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 193
[   50.813024] PCI: Setting latency timer of device 0000:00:1d.2 to 64
[   50.813027] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[   50.813146] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
[   50.813155] uhci_hcd 0000:00:1d.2: irq 193, io base 0x0000fd00
[   50.813418] hub 3-0:1.0: USB hub found
[   50.813425] hub 3-0:1.0: 2 ports detected
[   50.916891] ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 16 (level, low) -> IRQ 169
[   50.916898] PCI: Setting latency timer of device 0000:00:1d.3 to 64
[   50.916901] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[   50.917026] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4
[   50.917034] uhci_hcd 0000:00:1d.3: irq 169, io base 0x0000fc00
[   50.917300] hub 4-0:1.0: USB hub found
[   50.917307] hub 4-0:1.0: 2 ports detected
[   51.023131] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 209
[   51.023497] PCI: Setting latency timer of device 0000:00:1d.7 to 64
[   51.023502] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[   51.023537] PCI: cache line size of 128 is not supported by device 0000:00:1d.7
[   51.023576] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5
[   51.023585] ehci_hcd 0000:00:1d.7: irq 209, io mem 0xfdfff000
[   51.027480] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[   51.027561] hub 5-0:1.0: USB hub found
[   51.027569] hub 5-0:1.0: 8 ports detected
[   51.052653] usb 2-1: new full speed USB device using uhci_hcd and address 2
[   51.132734] ohci1394: $Rev: 1313 $ Ben Collins <bcollins@debian.org>
[   51.132761] ACPI: PCI Interrupt 0000:02:03.0[A] -> GSI 19 (level, low) -> IRQ 201
[   51.132768] PCI: Via IRQ fixup for 0000:02:03.0, from 10 to 9
[   51.185909] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[201]  MMIO=[fdefd000-fdefd7ff]  Max Packet=[2048]
[   51.202474] Probing IDE interface ide1...
[   51.793095] Attempting manual resume
[   51.815695] EXT3-fs: mounted filesystem with ordered data mode.
[   51.815811] kjournald starting.  Commit interval 5 seconds
[   51.873170] usb 5-3: new high speed USB device using ehci_hcd and address 2
[   52.006621] hub 5-3:1.0: USB hub found
[   52.006850] hub 5-3:1.0: 4 ports detected
[   52.357252] usb 5-4: new high speed USB device using ehci_hcd and address 3
[   52.469495] ieee1394: Host added: ID:BUS[0-00:1023]  GUID[0010dc0000c77a32]
[   53.246168] usb 5-3.2: new high speed USB device using ehci_hcd and address 7
[   53.701809] usb 5-3.3: new low speed USB device using ehci_hcd and address 8
[   54.037383] usb 3-1: new full speed USB device using uhci_hcd and address 2
[   54.457115] usb 3-2: new low speed USB device using uhci_hcd and address 3
[   54.880865] usb 4-1: new low speed USB device using uhci_hcd and address 2
[   57.516092] sd 0:0:0:0: Attached scsi generic sg0 type 0
[   59.281107] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[   59.284608] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[   59.418841] agpgart: Detected an Intel 945G Chipset.
[   59.436466] agpgart: AGP aperture is 256M @ 0x0
[   59.455531] nvidia: module license 'NVIDIA' taints kernel.
[   59.459207] ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 169
[   59.459218] PCI: Setting latency timer of device 0000:01:00.0 to 64
[   59.459400] NVRM: loading NVIDIA Linux x86_64 Kernel Module  1.0-8762  Mon May 15 13:58:14 PDT 2006
[   59.547904] Floppy drive(s): fd0 is 1.44M
[   59.581589] FDC 0 is a post-1991 82077
[   59.589252] input: PC Speaker as /class/input/input0
[   59.646932] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 16 (level, low) -> IRQ 169
[   59.647291] PCI: Setting latency timer of device 0000:00:1b.0 to 64
[   59.741872] hw_random: RNG not detected
[   59.745838] parport: PnPBIOS parport detected.
[   59.745893] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,ECP,DMA]
[   59.762182] usbcore: registered new driver hiddev
[   59.778740] input: Logitech USB Receiver as /class/input/input1
[   59.778780] input: USB HID v1.10 Keyboard [Logitech USB Receiver] on usb-0000:00:1d.2-2
[   59.812699] input: Logitech USB Receiver as /class/input/input2
[   59.812740] input: USB HID v1.10 Mouse [Logitech USB Receiver] on usb-0000:00:1d.2-2
[   59.828733] input: HID 062a:0000 as /class/input/input3
[   59.828768] input: USB HID v1.10 Mouse [HID 062a:0000] on usb-0000:00:1d.3-1
[   59.828780] usbcore: registered new driver usbhid
[   59.828783] drivers/usb/input/hid-core.c: v2.6:USB HID core driver
[   59.968166] drivers/usb/class/usblp.c: usblp0: USB Bidirectional printer dev 2 if 0 alt 0 proto 2 vid 0x03F0 pid 0x1904
[   59.968272] usbcore: registered new driver usblp
[   59.968275] drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver
[   60.001755] 8139too Fast Ethernet driver 0.9.27
[   60.003859] input: X10 WTI RF receiver as /class/input/input4
[   60.003971] usbcore: registered new driver ati_remote
[   60.003975] drivers/usb/input/ati_remote.c: Registered USB driver ATI/X10 RF USB Remote Control v. 2.2.1
[   60.004001] idVendor = 0x148f, idProduct = 0x2570
[   60.004114] INIT bRadio=1
[   60.004124] usbcore: registered new driver rtusb
[   60.009256] drivers/usb/input/ati_remote.c: Weird data, len=1 ff 00 00 00 00 00 ...
[   60.032138] hda_codec: Unknown model for ALC882, trying auto-probe from BIOS...
[   60.091498] ts: Compaq touchscreen protocol output
[   60.281082] ACPI: PCI Interrupt 0000:02:02.0[A] -> GSI 18 (level, low) -> IRQ 193
[   60.281838] eth0: RealTek RTL8139 at 0xffffc2001009c000, 00:13:d3:b3:b1:5a, IRQ 193
[   60.281842] eth0:  Identified 8139 chip type 'RTL-8100B/8139D'
[   60.287724] 8139cp: 10/100 PCI Ethernet driver v1.2 (Mar 22, 2004)
[   60.471110] eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
[   60.522823] lp0: using parport0 (interrupt-driven).
[   60.583459] sbp2: $Rev: 1306 $ Ben Collins <bcollins@debian.org>
[   60.583463] ieee1394: sbp2: Driver forced to serialize I/O (serialize_io=1)
[   60.583466] ieee1394: sbp2: Try serialize_io=0 for better performance
[   60.673625] Adding 2096468k swap on /dev/sda2.  Priority:-1 extents:1 across:2096468k
[   60.723941] EXT3 FS on sda1, internal journal
[   60.881770] md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
[   60.881774] md: bitmap version 4.39
[   61.220856] device-mapper: 4.4.0-ioctl (2005-01-12) initialised: dm-devel@redhat.com
[   61.945800] cdrom: open failed.
[   61.987736] NET: Registered protocol family 17
[   62.139369] cdrom: open failed.
[   62.141198] cdrom: open failed.
[   62.553608] kjournald starting.  Commit interval 5 seconds
[   62.553696] EXT3 FS on sda3, internal journal
[   62.553702] EXT3-fs: mounted filesystem with ordered data mode.
[   62.591150] FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
[   63.701359] NET: Registered protocol family 10
[   63.701493] lo: Disabled Privacy Extensions
[   63.701633] IPv6 over IPv4 tunneling driver
[   69.974774] ACPI: Power Button (FF) [PWRF]
[   69.974785] ACPI: Power Button (CM) [PWRB]
[   69.974794] ACPI: Sleep Button (CM) [SLPB]
[   70.063992] ibm_acpi: ec object not found
[   70.095618] pcc_acpi: loading...
[   70.520583] acpi-cpufreq: CPU0 - ACPI performance management activated.
[   70.520951] acpi-cpufreq: CPU1 - ACPI performance management activated.
[   73.810601] eth0: no IPv6 routers present
[   74.001228] ppdev: user-space parallel port driver
[   77.857633] rausb0 (WE) : Driver using old /proc/net/wireless support, please fix driver !
[   82.232778] /dev/vmmon[5236]: Module vmmon: registered with major=10 minor=165
[   82.232918] /dev/vmmon[5236]: Module vmmon: initialized
[   82.385434] /dev/vmnet: open called by PID 5264 (vmnet-bridge)
[   82.385596] /dev/vmnet: hub 0 does not exist, allocating memory.
[   82.386007] /dev/vmnet: port on hub 0 successfully opened
[   82.386340] bridge-eth0: enabling the bridge
[   82.386363] bridge-eth0: up
[   82.386478] bridge-eth0: already up
[   82.386521] bridge-eth0: attached
[   82.426574] /dev/vmnet: open called by PID 5278 (vmnet-natd)
[   82.426744] /dev/vmnet: hub 8 does not exist, allocating memory.
[   82.427169] /dev/vmnet: port on hub 8 successfully opened
[   82.629955] Bluetooth: Core ver 2.8
[   82.629961] NET: Registered protocol family 31
[   82.629963] Bluetooth: HCI device and connection manager initialized
[   82.629973] Bluetooth: HCI socket layer initialized
[   82.638936] Bluetooth: L2CAP ver 2.8
[   82.638941] Bluetooth: L2CAP socket layer initialized
[   82.642721] Bluetooth: RFCOMM socket layer initialized
[   82.642738] Bluetooth: RFCOMM TTY layer initialized
[   82.642741] Bluetooth: RFCOMM ver 1.7
[   92.439595] /dev/vmnet: open called by PID 5685 (vmnet-netifup)
[   92.439758] /dev/vmnet: port on hub 8 successfully opened
[   92.440750] /dev/vmnet: open called by PID 5686 (vmnet-netifup)
[   92.440969] /dev/vmnet: hub 1 does not exist, allocating memory.
[   92.441130] /dev/vmnet: port on hub 1 successfully opened
[   96.157150] /dev/vmnet: open called by PID 5712 (vmnet-dhcpd)
[   96.157171] /dev/vmnet: port on hub 8 successfully opened
[   96.365313] /dev/vmnet: open called by PID 5708 (vmnet-dhcpd)
[   96.365463] /dev/vmnet: port on hub 1 successfully opened
[  102.794266] vmnet1: no IPv6 routers present
[  102.991876] vmnet8: no IPv6 routers present
[  224.200668] Linux video capture interface: v1.00
[  224.244479] saa7134: Unknown parameter `secam'
[  376.826259] usb 5-3.3: USB disconnect, address 8
[  377.026298] usb 5-3.3: new low speed USB device using ehci_hcd and address 9
[  377.137500] input: X10 WTI RF receiver as /class/input/input5
[  377.145418] drivers/usb/input/ati_remote.c: Weird data, len=1 ff 00 00 00 00 00 ...
[  564.531486] usb 5-3.3: USB disconnect, address 9
[  564.731776] usb 5-3.3: new low speed USB device using ehci_hcd and address 10
[  565.802642] usb 5-3.3: device descriptor read/64, error -32
[  566.741651] hub 5-3:1.0: Cannot enable port 3.  Maybe the USB cable is bad?
[  567.592749] hub 5-3:1.0: Cannot enable port 3.  Maybe the USB cable is bad?
[  568.443846] hub 5-3:1.0: Cannot enable port 3.  Maybe the USB cable is bad?
[  569.294947] hub 5-3:1.0: Cannot enable port 3.  Maybe the USB cable is bad?
[  569.518706] usb 5-3.3: new low speed USB device using ehci_hcd and address 14
[  569.637641] input: X10 WTI RF receiver as /class/input/input6
[  569.645573] drivers/usb/input/ati_remote.c: Weird data, len=1 ff 00 00 00 00 00 ...
[  642.528890] usb 5-3.3: USB disconnect, address 14
[  642.730056] usb 5-3.3: new low speed USB device using ehci_hcd and address 15
[  642.840128] input: X10 WTI RF receiver as /class/input/input7
[  642.848054] drivers/usb/input/ati_remote.c: Weird data, len=1 ff 00 00 00 00 00 ...
[  646.364828] usb 5-3.3: USB disconnect, address 15
[  646.565994] usb 5-3.3: new low speed USB device using ehci_hcd and address 16
[  646.676069] input: X10 WTI RF receiver as /class/input/input8
[  646.683991] drivers/usb/input/ati_remote.c: Weird data, len=1 ff 00 00 00 00 00 ...
[  704.159626] usb 5-3.3: USB disconnect, address 16
[  704.360917] usb 5-3.3: new low speed USB device using ehci_hcd and address 17
[  704.470874] input: X10 WTI RF receiver as /class/input/input9
[  704.478784] drivers/usb/input/ati_remote.c: Weird data, len=1 ff 00 00 00 00 00 ...
[ 3022.930944] ip_tables: (C) 2000-2002 Netfilter core team
[ 3023.039926] Netfilter messages via NETLINK v0.30.
[ 3023.044375] ip_conntrack version 2.4 (4091 buckets, 32728 max) - 312 bytes per conntrack
[ 3365.660138] Unknown OutputIN= OUT=vmnet8 SRC=172.16.217.1 DST=172.16.217.255 LEN=266 TOS=0x00 PREC=0x00 TTL=64 ID=0 DF PROTO=UDP SPT=138 DPT=138 LEN=246
[ 3365.660331] Unknown OutputIN= OUT=vmnet8 SRC=172.16.217.1 DST=172.16.217.255 LEN=243 TOS=0x00 PREC=0x00 TTL=64 ID=0 DF PROTO=UDP SPT=138 DPT=138 LEN=223
[ 3365.660407] Unknown OutputIN= OUT=vmnet1 SRC=172.16.68.1 DST=172.16.68.255 LEN=266 TOS=0x00 PREC=0x00 TTL=64 ID=0 DF PROTO=UDP SPT=138 DPT=138 LEN=246
[ 3365.660468] Unknown OutputIN= OUT=vmnet1 SRC=172.16.68.1 DST=172.16.68.255 LEN=243 TOS=0x00 PREC=0x00 TTL=64 ID=0 DF PROTO=UDP SPT=138 DPT=138 LEN=223
[ 3713.572279] ati_remote 5-3.3:1.0: Unknown input from channel 0x00: data 00,00
[ 3713.620224] ati_remote 5-3.3:1.0: Unknown input from channel 0x00: data 00,00
[ 4024.994803] Unknown OutputIN= OUT=vmnet8 SRC=172.16.217.1 DST=172.16.217.255 LEN=266 TOS=0x00 PREC=0x00 TTL=64 ID=0 DF PROTO=UDP SPT=138 DPT=138 LEN=246
[ 4024.994936] Unknown OutputIN= OUT=vmnet8 SRC=172.16.217.1 DST=172.16.217.255 LEN=243 TOS=0x00 PREC=0x00 TTL=64 ID=0 DF PROTO=UDP SPT=138 DPT=138 LEN=223
[ 4024.995011] Unknown OutputIN= OUT=vmnet1 SRC=172.16.68.1 DST=172.16.68.255 LEN=266 TOS=0x00 PREC=0x00 TTL=64 ID=0 DF PROTO=UDP SPT=138 DPT=138 LEN=246
[ 4024.995074] Unknown OutputIN= OUT=vmnet1 SRC=172.16.68.1 DST=172.16.68.255 LEN=243 TOS=0x00 PREC=0x00 TTL=64 ID=0 DF PROTO=UDP SPT=138 DPT=138 LEN=223
[ 4744.272681] Unknown OutputIN= OUT=vmnet8 SRC=172.16.217.1 DST=172.16.217.255 LEN=266 TOS=0x00 PREC=0x00 TTL=64 ID=0 DF PROTO=UDP SPT=138 DPT=138 LEN=246
[ 4744.272806] Unknown OutputIN= OUT=vmnet8 SRC=172.16.217.1 DST=172.16.217.255 LEN=243 TOS=0x00 PREC=0x00 TTL=64 ID=0 DF PROTO=UDP SPT=138 DPT=138 LEN=223
[ 4744.272872] Unknown OutputIN= OUT=vmnet1 SRC=172.16.68.1 DST=172.16.68.255 LEN=266 TOS=0x00 PREC=0x00 TTL=64 ID=0 DF PROTO=UDP SPT=138 DPT=138 LEN=246
[ 4744.272924] Unknown OutputIN= OUT=vmnet1 SRC=172.16.68.1 DST=172.16.68.255 LEN=243 TOS=0x00 PREC=0x00 TTL=64 ID=0 DF PROTO=UDP SPT=138 DPT=138 LEN=223
[ 5463.529405] Unknown OutputIN= OUT=vmnet8 SRC=172.16.217.1 DST=172.16.217.255 LEN=266 TOS=0x00 PREC=0x00 TTL=64 ID=0 DF PROTO=UDP SPT=138 DPT=138 LEN=246
[ 5463.529536] Unknown OutputIN= OUT=vmnet8 SRC=172.16.217.1 DST=172.16.217.255 LEN=243 TOS=0x00 PREC=0x00 TTL=64 ID=0 DF PROTO=UDP SPT=138 DPT=138 LEN=223
[ 5463.529611] Unknown OutputIN= OUT=vmnet1 SRC=172.16.68.1 DST=172.16.68.255 LEN=266 TOS=0x00 PREC=0x00 TTL=64 ID=0 DF PROTO=UDP SPT=138 DPT=138 LEN=246
[ 5463.529670] Unknown OutputIN= OUT=vmnet1 SRC=172.16.68.1 DST=172.16.68.255 LEN=243 TOS=0x00 PREC=0x00 TTL=64 ID=0 DF PROTO=UDP SPT=138 DPT=138 LEN=223
[ 6182.788714] Unknown OutputIN= OUT=vmnet8 SRC=172.16.217.1 DST=172.16.217.255 LEN=266 TOS=0x00 PREC=0x00 TTL=64 ID=0 DF PROTO=UDP SPT=138 DPT=138 LEN=246
[ 6182.788837] Unknown OutputIN= OUT=vmnet8 SRC=172.16.217.1 DST=172.16.217.255 LEN=243 TOS=0x00 PREC=0x00 TTL=64 ID=0 DF PROTO=UDP SPT=138 DPT=138 LEN=223
[ 6182.788911] Unknown OutputIN= OUT=vmnet1 SRC=172.16.68.1 DST=172.16.68.255 LEN=266 TOS=0x00 PREC=0x00 TTL=64 ID=0 DF PROTO=UDP SPT=138 DPT=138 LEN=246
[ 6182.788971] Unknown OutputIN= OUT=vmnet1 SRC=172.16.68.1 DST=172.16.68.255 LEN=243 TOS=0x00 PREC=0x00 TTL=64 ID=0 DF PROTO=UDP SPT=138 DPT=138 LEN=223
[ 6407.770048] saa7130/34: v4l2 driver version 0.2.14 loaded
[ 6407.770251] GSI 20 sharing vector 0xD9 and IRQ 20
[ 6407.770353] ACPI: PCI Interrupt 0000:02:01.0[A] -> GSI 17 (level, low) -> IRQ 217
[ 6407.770515] saa7133[0]: found at 0000:02:01.0, rev: 209, irq: 217, latency: 32, mmio: 0xfdeff000
[ 6407.770667] saa7133[0]: subsystem: 16be:0007, board: UNKNOWN/GENERIC [card=0,autodetected]
[ 6407.770824] saa7133[0]: board init: gpio is 0
[ 6407.946327] tuner 3-004b: chip found @ 0x96 (saa7133[0])
[ 6407.982111] saa7133[0]: i2c eeprom 00: be 16 07 00 54 20 1c 00 43 43 a9 1c 55 d2 b2 92
[ 6407.982466] saa7133[0]: i2c eeprom 10: 00 ff 86 0f ff 20 ff 00 01 50 32 79 01 3c ca 50
[ 6407.982819] saa7133[0]: i2c eeprom 20: 01 40 01 02 02 03 01 00 06 ff 00 23 02 51 96 2b
[ 6407.983172] saa7133[0]: i2c eeprom 30: a7 58 7a 1f 03 8e 84 5e da 7a 04 b3 05 87 b2 3c
[ 6407.983524] saa7133[0]: i2c eeprom 40: ff 28 00 c0 96 10 03 00 c0 1c fd 79 44 9f c2 8f
[ 6407.983875] saa7133[0]: i2c eeprom 50: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 6407.984226] saa7133[0]: i2c eeprom 60: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 6407.984578] saa7133[0]: i2c eeprom 70: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 6407.984940] tuner 3-004b: tuner type not set
[ 6407.985033] tuner 3-004b: tuner type not set
[ 6407.985302] saa7133[0]: registered device video0 [v4l2]
[ 6407.985426] saa7133[0]: registered device vbi0
[ 6407.985596] GSI 21 sharing vector 0xE1 and IRQ 21
[ 6407.985688] ACPI: PCI Interrupt 0000:02:04.0[A] -> GSI 20 (level, low) -> IRQ 225
[ 6407.985848] saa7133[1]: found at 0000:02:04.0, rev: 209, irq: 225, latency: 32, mmio: 0xfdefc000
[ 6407.986001] saa7133[1]: subsystem: 16be:0008, board: UNKNOWN/GENERIC [card=0,autodetected]
[ 6407.986161] saa7133[1]: board init: gpio is 0
[ 6408.161922] tuner 4-004b: chip found @ 0x96 (saa7133[1])
[ 6408.197922] saa7133[1]: i2c eeprom 00: be 16 08 00 54 20 1c 00 43 43 a9 1c 55 d2 b2 92
[ 6408.198297] saa7133[1]: i2c eeprom 10: 00 ff 86 0f ff 20 ff 00 01 50 32 79 01 3c ca 50
[ 6408.198652] saa7133[1]: i2c eeprom 20: 01 40 01 02 02 03 01 0f 0f ff 00 3c 02 51 96 2b
[ 6408.199005] saa7133[1]: i2c eeprom 30: a7 58 7a 1f 03 8e 84 5e da 7a 04 b3 05 87 b2 3c
[ 6408.199356] saa7133[1]: i2c eeprom 40: ff 28 00 c0 96 10 03 01 c0 1c fd 79 44 9f c2 8f
[ 6408.199708] saa7133[1]: i2c eeprom 50: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 6408.200059] saa7133[1]: i2c eeprom 60: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 6408.200410] saa7133[1]: i2c eeprom 70: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 6408.200770] tuner 4-004b: tuner type not set
[ 6408.200863] tuner 4-004b: tuner type not set
[ 6408.201121] saa7133[1]: registered device video1 [v4l2]
[ 6408.201248] saa7133[1]: registered device vbi1
[ 6408.233296] saa7134 ALSA driver for DMA sound loaded
[ 6408.233400] saa7133[0]/alsa: saa7133[0] at 0xfdeff000 irq 217 registered as card -1
[ 6902.059653] Unknown OutputIN= OUT=vmnet8 SRC=172.16.217.1 DST=172.16.217.255 LEN=266 TOS=0x00 PREC=0x00 TTL=64 ID=0 DF PROTO=UDP SPT=138 DPT=138 LEN=246
[ 6902.059782] Unknown OutputIN= OUT=vmnet8 SRC=172.16.217.1 DST=172.16.217.255 LEN=243 TOS=0x00 PREC=0x00 TTL=64 ID=0 DF PROTO=UDP SPT=138 DPT=138 LEN=223
[ 6902.059855] Unknown OutputIN= OUT=vmnet1 SRC=172.16.68.1 DST=172.16.68.255 LEN=266 TOS=0x00 PREC=0x00 TTL=64 ID=0 DF PROTO=UDP SPT=138 DPT=138 LEN=246
[ 6902.059916] Unknown OutputIN= OUT=vmnet1 SRC=172.16.68.1 DST=172.16.68.255 LEN=243 TOS=0x00 PREC=0x00 TTL=64 ID=0 DF PROTO=UDP SPT=138 DPT=138 LEN=223
[ 6954.843907] ati_remote 5-3.3:1.0: Unknown input from channel 0x02: data 00,c0
[ 7621.332227] Unknown OutputIN= OUT=vmnet8 SRC=172.16.217.1 DST=172.16.217.255 LEN=266 TOS=0x00 PREC=0x00 TTL=64 ID=0 DF PROTO=UDP SPT=138 DPT=138 LEN=246
[ 7621.332355] Unknown OutputIN= OUT=vmnet8 SRC=172.16.217.1 DST=172.16.217.255 LEN=243 TOS=0x00 PREC=0x00 TTL=64 ID=0 DF PROTO=UDP SPT=138 DPT=138 LEN=223
[ 7621.332422] Unknown OutputIN= OUT=vmnet1 SRC=172.16.68.1 DST=172.16.68.255 LEN=266 TOS=0x00 PREC=0x00 TTL=64 ID=0 DF PROTO=UDP SPT=138 DPT=138 LEN=246
[ 7621.332474] Unknown OutputIN= OUT=vmnet1 SRC=172.16.68.1 DST=172.16.68.255 LEN=243 TOS=0x00 PREC=0x00 TTL=64 ID=0 DF PROTO=UDP SPT=138 DPT=138 LEN=223
[ 8340.603154] Unknown OutputIN= OUT=vmnet8 SRC=172.16.217.1 DST=172.16.217.255 LEN=266 TOS=0x00 PREC=0x00 TTL=64 ID=0 DF PROTO=UDP SPT=138 DPT=138 LEN=246
[ 8340.603286] Unknown OutputIN= OUT=vmnet8 SRC=172.16.217.1 DST=172.16.217.255 LEN=243 TOS=0x00 PREC=0x00 TTL=64 ID=0 DF PROTO=UDP SPT=138 DPT=138 LEN=223
[ 8340.603359] Unknown OutputIN= OUT=vmnet1 SRC=172.16.68.1 DST=172.16.68.255 LEN=266 TOS=0x00 PREC=0x00 TTL=64 ID=0 DF PROTO=UDP SPT=138 DPT=138 LEN=246

cabrito · Le 17/10/2006, à 16:22

bizarre , as-tu bien précisé : tuner secam=l et saa7134 card=96 ?

Raphraphou · Le 17/10/2006, à 16:30

oups, je crois avoir oublié de te préciser que je suis en Belgique....
Si je me souviens bien, on utilise pas le sécam mais le pal-b non ?

Ubuntu-fr

Navigation

Liens de recherche

Annonce

#1 Le 15/10/2006, à 22:03

Carte télé hybride philips dual 7131E

#2 Le 15/10/2006, à 23:50

Re : Carte télé hybride philips dual 7131E

#3 Le 16/10/2006, à 14:56

Re : Carte télé hybride philips dual 7131E

#4 Le 16/10/2006, à 15:04

Re : Carte télé hybride philips dual 7131E

#5 Le 16/10/2006, à 15:05

Re : Carte télé hybride philips dual 7131E

#6 Le 16/10/2006, à 15:24

Re : Carte télé hybride philips dual 7131E

#7 Le 16/10/2006, à 15:31

Re : Carte télé hybride philips dual 7131E

#8 Le 16/10/2006, à 15:49

Re : Carte télé hybride philips dual 7131E

#9 Le 16/10/2006, à 17:01

Re : Carte télé hybride philips dual 7131E

#10 Le 16/10/2006, à 17:21

Re : Carte télé hybride philips dual 7131E

#11 Le 16/10/2006, à 17:32

Re : Carte télé hybride philips dual 7131E

#12 Le 16/10/2006, à 18:05

Re : Carte télé hybride philips dual 7131E

#13 Le 17/10/2006, à 00:07

Re : Carte télé hybride philips dual 7131E

#14 Le 17/10/2006, à 00:43

Re : Carte télé hybride philips dual 7131E

#15 Le 17/10/2006, à 00:46

Re : Carte télé hybride philips dual 7131E

#16 Le 17/10/2006, à 00:58

Re : Carte télé hybride philips dual 7131E

#17 Le 17/10/2006, à 12:13

Re : Carte télé hybride philips dual 7131E

#18 Le 17/10/2006, à 12:54

Re : Carte télé hybride philips dual 7131E

#19 Le 17/10/2006, à 14:05

Re : Carte télé hybride philips dual 7131E

#20 Le 17/10/2006, à 14:24

Re : Carte télé hybride philips dual 7131E

#21 Le 17/10/2006, à 16:10

Re : Carte télé hybride philips dual 7131E

#22 Le 17/10/2006, à 16:16

Re : Carte télé hybride philips dual 7131E

#23 Le 17/10/2006, à 16:19

Re : Carte télé hybride philips dual 7131E

#24 Le 17/10/2006, à 16:22

Re : Carte télé hybride philips dual 7131E

#25 Le 17/10/2006, à 16:30

Re : Carte télé hybride philips dual 7131E

Pied de page des forums