Pages : 1
#1 Le 21/10/2006, à 12:39
- philou11
Problèmes graphiques? (résolu)
En gros, dès que j'utilise des programmes graphiques, mon processeur monte à 100 pour cent, que ce soit avec la webcam, avec tvtime (j'ai une carte tuner haupange), que je regarde des vidéos avec mplayer, ........ De plus, ma web cam n'est pas reconnue par Amsn à chaque fois (il n'y a que ma carte TV) et parfois quand j'ouvre TVtime il me met qu'il n'y a pas de signal pour ma carte TV !!!!!!!!!
Configuration:
-Carte graphique Geforce2 TI avec drivers legacy
-Carte tv haupange sur PCI
-Webcam creative PD1000
-Processeur Amd Athlon 1400 avec Kernel optimisé K7
-400 Mo de sdram pc 133
J'ai installé tout les drivers manuellement et je n'ai pas eu de message d'erreur
De plus, quand la webcam est reconnue, elle bloque souvent et j'ai régulièrement des plantages au bout d'un certain temps avec les applications susmentionées ---------> reboot en façade!
Je suis sous Ubuntu 6.06 avec gnome
Merci de bien vouloir m'aider 
Dernière modification par pufkine (Le 25/10/2006, à 17:57)
Sous Linux, la positive attitude est de mise et je suis très optimiste pour l'avenir.
Vous êtes victime d'une arnaque sur le net, vous tombez sur des contenus illicite (pedopornographie, haine raciale, ...), vous devez le signaler http://www.ecops.be/webforms/Default.aspx?Lang=FR
Hors ligne
#2 Le 21/10/2006, à 15:45
- philou11
Re : Problèmes graphiques? (résolu)
Voici mon xorg.conf
# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig: version 1.0 (buildd@rothera) Thu Jan 5 15:32:31 UTC 2006
# /etc/X11/xorg.conf (xorg X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the /etc/X11/xorg.conf manual page.
# (Type "man /etc/X11/xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
# sudo dpkg-reconfigure -phigh xserver-xorg
Section "ServerLayout"
Identifier "Default Layout"
Screen "Default Screen" 0 0
InputDevice "Generic Keyboard"
InputDevice "Configured Mouse"
InputDevice "stylus" "SendCoreEvents"
InputDevice "cursor" "SendCoreEvents"
InputDevice "eraser" "SendCoreEvents"
EndSection
Section "Files"
# path to defoma fonts
FontPath "/usr/share/X11/fonts/misc"
FontPath "/usr/share/X11/fonts/cyrillic"
FontPath "/usr/share/X11/fonts/100dpi/:unscaled"
FontPath "/usr/share/X11/fonts/75dpi/:unscaled"
FontPath "/usr/share/X11/fonts/Type1"
FontPath "/usr/share/X11/fonts/100dpi"
FontPath "/usr/share/X11/fonts/75dpi"
FontPath "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
EndSection
Section "Module"
Load "i2c"
Load "bitmap"
Load "ddc"
Load "extmod"
Load "freetype"
Load "glx"
Load "int10"
Load "type1"
Load "vbe"
EndSection
Section "InputDevice"
Identifier "Generic Keyboard"
Driver "kbd"
Option "CoreKeyboard"
Option "XkbRules" "xorg"
Option "XkbModel" "pc105"
Option "XkbLayout" "be"
EndSection
Section "InputDevice"
Identifier "Configured Mouse"
Driver "mouse"
Option "CorePointer"
Option "Device" "/dev/input/mice"
Option "Protocol" "ExplorerPS/2"
Option "ZAxisMapping" "4 5"
Option "Emulate3Buttons" "true"
EndSection
Section "InputDevice"
# /dev/input/event
# for USB
Identifier "stylus"
Driver "wacom"
Option "Device" "/dev/wacom" # Change to
Option "Type" "stylus"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection
Section "InputDevice"
# /dev/input/event
# for USB
Identifier "eraser"
Driver "wacom"
Option "Device" "/dev/wacom" # Change to
Option "Type" "eraser"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection
Section "InputDevice"
# /dev/input/event
# for USB
Identifier "cursor"
Driver "wacom"
Option "Device" "/dev/wacom" # Change to
Option "Type" "cursor"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection
Section "Monitor"
Identifier "EIZO FlexSca"
Option "DPMS"
EndSection
Section "Device"
Identifier "NVIDIA Corporation NV15DDR [GeForce2 Ti]"
Driver "nvidia"
EndSection
Section "Screen"
Identifier "Default Screen"
Device "NVIDIA Corporation NV15DDR [GeForce2 Ti]"
Monitor "EIZO FlexSca"
DefaultDepth 24
SubSection "Display"
Depth 1
Modes "1280x1024" "1152x864" "1024x768" "832x624" "800x600" "720x400" "640x480"
EndSubSection
SubSection "Display"
Depth 4
Modes "1280x1024" "1152x864" "1024x768" "832x624" "800x600" "720x400" "640x480"
EndSubSection
SubSection "Display"
Depth 8
Modes "1280x1024" "1152x864" "1024x768" "832x624" "800x600" "720x400" "640x480"
EndSubSection
SubSection "Display"
Depth 15
Modes "1280x1024" "1152x864" "1024x768" "832x624" "800x600" "720x400" "640x480"
EndSubSection
SubSection "Display"
Depth 16
Modes "1280x1024" "1152x864" "1024x768" "832x624" "800x600" "720x400" "640x480"
EndSubSection
SubSection "Display"
Depth 24
Modes "1280x1024" "1152x864" "1024x768" "832x624" "800x600" "720x400" "640x480"
EndSubSection
EndSectionet mon fstab
# /etc/fstab: static file system information.
#
# <file system> <mount point> <type> <options> <dump> <pass>
proc /proc proc defaults 0 0
/dev/hda1 / ext3 defaults,errors=remount-ro 0 1
/dev/hdb1 /media/hdb1 ext3 defaults 0 2
/dev/hdb2 /media/hdb2 ext3 defaults 0 2
/dev/hda5 none swap sw 0 0
/dev/hdb5 none swap sw 0 0
/dev/hdc /media/cdrom0 udf,iso9660 user,noauto 0 0Un lsusb
philippe@ubuntu:~$ lsusb
Bus 002 Device 001: ID 0000:0000
Bus 001 Device 002: ID 041e:400c Creative Technology, Ltd WebCam 5 [pwc]
Bus 001 Device 001: ID 0000:0000philippe@ubuntu:~$ lsmod | grep pwc
pwc 91124 0
v4l2_common 6336 2 pwc,bttv
videodev 10368 2 pwc,bttv
usbcore 139012 3 pwc,uhci_hcdDmesg
philippe@ubuntu:~$ dmesg
[17179569.184000] Linux version 2.6.15-27-k7 (buildd@terranova) (gcc version 4.0.3 (Ubuntu 4.0.3-1ubuntu5)) #1 SMP PREEMPT Sat Sep 16 02:35:20 UTC 2006
[17179569.184000] BIOS-provided physical RAM map:
[17179569.184000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[17179569.184000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[17179569.184000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[17179569.184000] BIOS-e820: 0000000000100000 - 0000000017ff0000 (usable)
[17179569.184000] BIOS-e820: 0000000017ff0000 - 0000000017ff3000 (ACPI NVS)
[17179569.184000] BIOS-e820: 0000000017ff3000 - 0000000018000000 (ACPI data)
[17179569.184000] BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
[17179569.184000] 0MB HIGHMEM available.
[17179569.184000] 383MB LOWMEM available.
[17179569.184000] On node 0 totalpages: 98288
[17179569.184000] DMA zone: 4096 pages, LIFO batch:0
[17179569.184000] DMA32 zone: 0 pages, LIFO batch:0
[17179569.184000] Normal zone: 94192 pages, LIFO batch:31
[17179569.184000] HighMem zone: 0 pages, LIFO batch:0
[17179569.184000] DMI 2.3 present.
[17179569.184000] ACPI: RSDP (v000 VIA694 ) @ 0x000f7e10
[17179569.184000] ACPI: RSDT (v001 VIA694 AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x17ff3000
[17179569.184000] ACPI: FADT (v001 VIA694 AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x17ff3040
[17179569.184000] ACPI: DSDT (v001 VIA694 AWRDACPI 0x00001000 MSFT 0x0100000c) @ 0x00000000
[17179569.184000] ACPI: PM-Timer IO Port: 0x4008
[17179569.184000] Allocating PCI resources starting at 20000000 (gap: 18000000:e7ff0000)
[17179569.184000] Built 1 zonelists
[17179569.184000] Kernel command line: root=/dev/hda1 ro quiet splash
[17179569.184000] Local APIC disabled by BIOS (or by default) -- you can enable it with "lapic"
[17179569.184000] mapped APIC to ffffd000 (013a3000)
[17179569.184000] Initializing CPU#0
[17179569.184000] PID hash table entries: 2048 (order: 11, 32768 bytes)
[17179569.184000] Detected 1377.564 MHz processor.
[17179569.184000] Using pmtmr for high-res timesource
[17179569.184000] Console: colour VGA+ 80x25
[17179569.216000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[17179569.216000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)[17179569.240000] Memory: 378220k/393152k available (2103k kernel code, 14388k reserved, 599k data, 332k init, 0k highmem)
[17179569.240000] Checking if this processor honours the WP bit even in supervisor mode... Ok.
[17179569.320000] Calibrating delay using timer specific routine.. 2757.75 BogoMIPS (lpj=5515500)
[17179569.320000] Security Framework v1.0.0 initialized
[17179569.320000] SELinux: Disabled at boot.
[17179569.320000] Mount-cache hash table entries: 512
[17179569.320000] CPU: After generic identify, caps: 0183f9ff c1c7f9ff 00000000 00000000 00000000 00000000 00000000
[17179569.320000] CPU: After vendor identify, caps: 0183f9ff c1c7f9ff 00000000 00000000 00000000 00000000 00000000
[17179569.320000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[17179569.320000] CPU: L2 Cache: 256K (64 bytes/line)
[17179569.320000] CPU: After all inits, caps: 0183f9ff c1c7f9ff 00000000 00000420 00000000 00000000 00000000
[17179569.320000] mtrr: v2.0 (20020519)
[17179569.320000] Enabling fast FPU save and restore... done.
[17179569.320000] Checking 'hlt' instruction... OK.
[17179569.336000] SMP alternatives: switching to UP code
[17179569.336000] checking if image is initramfs... it is
[17179570.168000] Freeing initrd memory: 6763k freed
[17179570.204000] ACPI: Looking for DSDT ... not found!
[17179570.208000] ACPI: setting ELCR to 0800 (from 0a00)
[17179570.216000] CPU0: AMD Athlon(tm) Processor stepping 02
[17179570.216000] SMP motherboard not detected.
[17179570.216000] Local APIC not detected. Using dummy APIC emulation.
[17179570.216000] Brought up 1 CPUs
[17179570.216000] NET: Registered protocol family 16
[17179570.216000] EISA bus registered
[17179570.216000] ACPI: bus type pci registered
[17179570.232000] PCI: PCI BIOS revision 2.10 entry at 0xfb4b0, last bus=1
[17179570.232000] PCI: Using configuration type 1
[17179570.232000] ACPI: Subsystem revision 20051216
[17179570.244000] ACPI: Interpreter enabled
[17179570.244000] ACPI: Using PIC for interrupt routing
[17179570.244000] ACPI: PCI Root Bridge [PCI0] (0000:00)
[17179570.244000] PCI: Probing PCI hardware (bus 00)
[17179570.244000] ACPI: Assume root bridge [\_SB_.PCI0] bus is 0
[17179570.248000] PCI quirk: region 4000-40ff claimed by vt82c586 ACPI
[17179570.248000] PCI quirk: region 6000-607f claimed by vt82c686 HW-mon
[17179570.248000] PCI quirk: region 5000-500f claimed by vt82c686 SMB
[17179570.248000] Boot video device is 0000:01:00.0
[17179570.248000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[17179570.272000] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 *11 12 14 15)
[17179570.272000] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 10 11 12 14 15) *9
[17179570.272000] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 *11 12 14 15)
[17179570.272000] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 10 *11 12 14 15)
[17179570.276000] Linux Plug and Play Support v0.97 (c) Adam Belay
[17179570.276000] pnp: PnP ACPI init
[17179570.280000] pnp: PnP ACPI: found 12 devices
[17179570.280000] PnPBIOS: Disabled by ACPI PNP
[17179570.280000] PCI: Using ACPI for IRQ routing
[17179570.280000] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
[17179570.308000] PCI: Bridge: 0000:00:01.0
[17179570.308000] IO window: disabled.
[17179570.308000] MEM window: dc000000-ddffffff
[17179570.308000] PREFETCH window: d0000000-d7ffffff
[17179570.308000] PCI: Setting latency timer of device 0000:00:01.0 to 64
[17179570.308000] audit: initializing netlink socket (disabled)
[17179570.308000] audit(1161439416.304:1): initialized
[17179570.308000] VFS: Disk quotas dquot_6.5.1
[17179570.308000] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[17179570.308000] Initializing Cryptographic API
[17179570.308000] io scheduler noop registered
[17179570.308000] io scheduler anticipatory registered
[17179570.308000] io scheduler deadline registered
[17179570.308000] io scheduler cfq registered
[17179570.308000] PCI: Disabling Via external APIC routing
[17179570.308000] isapnp: Scanning for PnP cards...
[17179570.664000] isapnp: No Plug & Play device found
[17179570.684000] Real Time Clock Driver v1.12
[17179570.684000] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[17179570.684000] serio: i8042 AUX port at 0x60,0x64 irq 12
[17179570.684000] serio: i8042 KBD port at 0x60,0x64 irq 1
[17179570.684000] Serial: 8250/16550 driver $Revision: 1.90 $ 48 ports, IRQ sharing enabled
[17179570.684000] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[17179570.688000] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[17179570.688000] 00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[17179570.688000] 00:08: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[17179570.688000] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[17179570.692000] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[17179570.692000] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[17179570.692000] mice: PS/2 mouse device common for all mice
[17179570.692000] EISA: Probing bus 0 at eisa.0
[17179570.692000] Cannot allocate resource for EISA slot 4
[17179570.692000] Cannot allocate resource for EISA slot 5
[17179570.692000] Cannot allocate resource for EISA slot 6
[17179570.692000] EISA: Detected 0 cards.
[17179570.692000] NET: Registered protocol family 2
[17179570.716000] input: AT Translated Set 2 keyboard as /class/input/input0
[17179570.736000] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
[17179570.736000] TCP established hash table entries: 16384 (order: 5, 196608 bytes)
[17179570.736000] TCP bind hash table entries: 16384 (order: 5, 196608 bytes)
[17179570.736000] TCP: Hash tables configured (established 16384 bind 16384)
[17179570.736000] TCP reno registered
[17179570.736000] TCP bic registered
[17179570.736000] NET: Registered protocol family 1
[17179570.736000] NET: Registered protocol family 8
[17179570.736000] NET: Registered protocol family 20
[17179570.736000] Using IPI No-Shortcut mode
[17179570.736000] ACPI wakeup devices:
[17179570.736000] SLPB PCI0 USB0 USB1 MODM UAR1 UAR2 ECP1
[17179570.736000] ACPI: (supports S0 S1 S4 S5)
[17179570.736000] Freeing unused kernel memory: 332k freed
[17179570.820000] vga16fb: initializing
[17179570.820000] vga16fb: mapped to 0xc00a0000
[17179570.936000] Console: switching to colour frame buffer device 80x25
[17179570.936000] fb0: VGA16 VGA frame buffer device
[17179572.048000] Capability LSM initialized
[17179572.104000] ACPI: CPU0 (power states: C1[C1] C2[C2])
[17179572.104000] ACPI: Processor [CPU0] (supports 2 throttling states)
[17179572.972000] VP_IDE: IDE controller at PCI slot 0000:00:07.1
[17179572.972000] PCI: Via IRQ fixup for 0000:00:07.1, from 255 to 0
[17179572.972000] VP_IDE: chipset revision 16
[17179572.972000] VP_IDE: not 100% native mode: will probe irqs later
[17179572.972000] VP_IDE: VIA vt82c686a (rev 22) IDE UDMA66 controller on pci0000:00:07.1
[17179572.972000] ide0: BM-DMA at 0xc000-0xc007, BIOS settings: hda:DMA, hdb:DMA
[17179572.972000] ide1: BM-DMA at 0xc008-0xc00f, BIOS settings: hdc:DMA, hdd:pio
[17179572.972000] Probing IDE interface ide0...
[17179573.388000] hda: QUANTUM FIREBALLlct08 08, ATA DISK drive
[17179573.668000] hdb: WDC AC26400R, ATA DISK drive
[17179573.736000] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[17179573.740000] Probing IDE interface ide1...
[17179574.604000] hdc: ATAPI DVD-ROM 16XMax, ATAPI CD/DVD-ROM drive
[17179574.940000] ide1 at 0x170-0x177,0x376 on irq 15
[17179574.952000] hda: max request size: 128KiB
[17179574.972000] hda: 16514064 sectors (8455 MB) w/418KiB Cache, CHS=16383/16/63
[17179574.972000] hda: cache flushes not supported
[17179574.972000] hda:hda: dma_intr: status=0x51 { DriveReady SeekComplete Error }
[17179574.976000] hda: dma_intr: error=0x84 { DriveStatusError BadCRC }
[17179574.976000] ide: failed opcode was: unknown
[17179574.976000] hda: dma_intr: status=0x51 { DriveReady SeekComplete Error }
[17179574.976000] hda: dma_intr: error=0x84 { DriveStatusError BadCRC }
[17179574.976000] ide: failed opcode was: unknown
[17179574.976000] hda: dma_intr: status=0x51 { DriveReady SeekComplete Error }
[17179574.976000] hda: dma_intr: error=0x84 { DriveStatusError BadCRC }
[17179574.976000] ide: failed opcode was: unknown
[17179574.976000] hda: dma_intr: status=0x51 { DriveReady SeekComplete Error }
[17179574.976000] hda: dma_intr: error=0x84 { DriveStatusError BadCRC }
[17179574.976000] ide: failed opcode was: unknown
[17179574.976000] hdb: DMA disabled
[17179575.072000] ide0: reset: success
[17179575.076000] hda1 hda2 < hda5 >
[17179575.096000] hdb: max request size: 128KiB
[17179575.096000] hdb: 12594960 sectors (6448 MB) w/512KiB Cache, CHS=13328/15/63
[17179575.096000] hdb: cache flushes not supported
[17179575.096000] hdb: hdb1 hdb2 hdb3 < hdb5 >
[17179575.156000] hdc: ATAPI 48X DVD-ROM drive, 512kB Cache, UDMA(33)
[17179575.156000] Uniform CD-ROM driver Revision: 3.20
[17179575.876000] usbcore: registered new driver usbfs
[17179575.876000] usbcore: registered new driver hub
[17179575.880000] USB Universal Host Controller Interface driver v2.3
[17179575.880000] **** SET: Misaligned resource pointer: d7d1c9e2 Type 07 Len 0
[17179575.880000] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11
[17179575.880000] PCI: setting IRQ 11 as level-triggered
[17179575.880000] ACPI: PCI Interrupt 0000:00:07.2[D] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11
[17179575.880000] uhci_hcd 0000:00:07.2: UHCI Host Controller
[17179575.884000] uhci_hcd 0000:00:07.2: new USB bus registered, assigned bus number 1
[17179575.884000] uhci_hcd 0000:00:07.2: irq 11, io base 0x0000c400
[17179575.884000] hub 1-0:1.0: USB hub found
[17179575.884000] hub 1-0:1.0: 2 ports detected
[17179575.988000] ACPI: PCI Interrupt 0000:00:07.3[D] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11
[17179575.988000] uhci_hcd 0000:00:07.3: UHCI Host Controller
[17179575.988000] uhci_hcd 0000:00:07.3: new USB bus registered, assigned bus number 2
[17179575.988000] uhci_hcd 0000:00:07.3: irq 11, io base 0x0000c800
[17179575.988000] hub 2-0:1.0: USB hub found
[17179575.988000] hub 2-0:1.0: 2 ports detected
[17179576.228000] usb 1-1: new full speed USB device using uhci_hcd and address 2
[17179576.260000] Attempting manual resume
[17179576.316000] EXT3-fs: mounted filesystem with ordered data mode.
[17179576.344000] kjournald starting. Commit interval 5 seconds
[17179591.168000] Linux agpgart interface v0.101 (c) Dave Jones
[17179591.188000] agpgart: Detected VIA Twister-K/KT133x/KM133 chipset
[17179591.196000] agpgart: AGP aperture is 64M @ 0xd8000000
[17179591.584000] parport_pc: VIA 686A/8231 detected
[17179591.584000] parport_pc: probing current configuration
[17179591.584000] parport_pc: Current parallel port base: 0x378
[17179591.584000] parport0: PC-style at 0x378 (0x778), irq 7, using FIFO [PCSPP,TRISTATE,COMPAT,ECP]
[17179591.604000] Linux video capture interface: v1.00
[17179591.684000] parport_pc: VIA parallel port: io=0x378, irq=7
[17179591.820000] bttv: driver version 0.9.16 loaded
[17179591.820000] bttv: using 8 buffers with 2080k (520 pages) each for capture
[17179591.820000] bttv: Bt8xx card found (0).
[17179591.820000] **** SET: Misaligned resource pointer: d7d1c4a2 Type 07 Len 0
[17179591.820000] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 10
[17179591.820000] PCI: setting IRQ 10 as level-triggered
[17179591.820000] ACPI: PCI Interrupt 0000:00:0a.0[A] -> Link [LNKB] -> GSI 10 (level, low) -> IRQ 10
[17179591.820000] bttv0: Bt878 (rev 17) at 0000:00:0a.0, irq: 10, latency: 32, mmio: 0xdf002000
[17179591.820000] bttv0: detected: Hauppauge WinTV [card=10], PCI subsystem ID is 0070:13eb
[17179591.820000] bttv0: using: Hauppauge (bt878) [card=10,autodetected]
[17179591.820000] bttv0: gpio: en=00000000, out=00000000 in=00fffffb [init]
[17179591.824000] bttv0: Hauppauge/Voodoo msp34xx: reset line init [5]
[17179591.932000] tveeprom 0-0050: Hauppauge model 38104, rev B408, serial# 3919875
[17179591.932000] tveeprom 0-0050: tuner model is Philips FI1216 MK2 (idx 8, type 5)
[17179591.932000] tveeprom 0-0050: TV standards PAL(B/G) (eeprom 0x04)
[17179591.932000] tveeprom 0-0050: audio processor is None (idx 0)
[17179591.932000] tveeprom 0-0050: has no radio
[17179591.932000] bttv0: using tuner=5
[17179591.932000] bttv0: i2c: checking for MSP34xx @ 0x80... not found
[17179591.936000] bttv0: i2c: checking for TDA9875 @ 0xb0... not found
[17179591.936000] bttv0: i2c: checking for TDA7432 @ 0x8a... not found
[17179592.040000] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[17179592.168000] **** SET: Misaligned resource pointer: d36f5d02 Type 07 Len 0
[17179592.168000] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11
[17179592.168000] ACPI: PCI Interrupt 0000:00:07.5[C] -> Link [LNKC] -> GSI 11 (level, low) -> IRQ 11
[17179592.168000] PCI: Setting latency timer of device 0000:00:07.5 to 64
[17179592.624000] FDC 0 is a post-1991 82077
[17179592.700000] input: PC Speaker as /class/input/input1
[17179592.728000] bttv0: i2c: checking for TDA9887 @ 0x86... not found
[17179592.764000] tuner 0-0061: chip found @ 0xc2 (bt878 #0 [sw])
[17179592.764000] tuner 0-0061: type set to 5 (Philips PAL_BG (FI1216 and compatibles))
[17179592.796000] bttv0: registered device video0
[17179592.796000] bttv0: registered device vbi0
[17179592.796000] bttv0: PLL: 28636363 => 35468950 ..<6>pwc Philips webcam module version 10.0.7-unofficial loaded.
[17179592.816000] pwc Supports Philips PCA645/646, PCVC675/680/690, PCVC720[40]/730/740/750 & PCVC830/840.
[17179592.816000] pwc Also supports the Askey VC010, various Logitech Quickcams, Samsung MPC-C10 and MPC-C30,
[17179592.816000] pwc the Creative WebCam 5 & Pro Ex, SOTEC Afina Eye and Visionite VCS-UC300 and VCS-UM100.
[17179592.816000] pwc Trace options: 0x00a1
[17179592.816000] pwc Creative Labs Webcam 5 detected.
[17179592.828000] ok
[17179592.828000] ACPI: PCI Interrupt 0000:00:0a.1[A] -> Link [LNKB] -> GSI 10 (level, low) -> IRQ 10
[17179592.868000] pwc Registered as /dev/video1.
[17179592.868000] usbcore: registered new driver Philips webcam
[17179592.868000] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[17179592.868000] ACPI: PCI Interrupt 0000:00:0c.0[A] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11
[17179592.868000] **** SET: Misaligned resource pointer: d2f497e2 Type 07 Len 0
[17179592.872000] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11
[17179592.872000] ACPI: PCI Interrupt 0000:00:0d.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
[17179592.872000] 3c59x: Donald Becker and others. www.scyld.com/network/vortex.html
[17179592.872000] 0000:00:0d.0: 3Com PCI 3c905B Cyclone 100baseTx at d89a4000. Vers LK1.1.19
[17179592.956000] bt878: AUDIO driver version 0.0.0 loaded
[17179593.340000] input: ImPS/2 Generic Wheel Mouse as /class/input/input2
[17179593.756000] nvidia: module license 'NVIDIA' taints kernel.
[17179593.772000] ACPI: PCI Interrupt 0000:01:00.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
[17179593.772000] NVRM: loading NVIDIA Linux x86 NVIDIA Kernel Module 1.0-7174 Tue Mar 22 06:44:39 PST 2005
[17179593.784000] ts: Compaq touchscreen protocol output
[17179594.396000] ACPI: PCI Interrupt 0000:00:0d.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
[17179594.452000] lp0: using parport0 (interrupt-driven).
[17179594.548000] Adding 369452k swap on /dev/hda5. Priority:-1 extents:1 across:369452k
[17179594.548000] Adding 168640k swap on /dev/hdb5. Priority:-2 extents:1 across:168640k
[17179595.860000] NET: Registered protocol family 17
[17179598.212000] NET: Registered protocol family 10
[17179598.212000] lo: Disabled Privacy Extensions
[17179598.212000] IPv6 over IPv4 tunneling driver
[17179609.196000] eth1: no IPv6 routers present
[17179676.084000] EXT3 FS on hda1, internal journal
[17179676.296000] md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
[17179676.296000] md: bitmap version 4.39
[17179676.972000] device-mapper: 4.4.0-ioctl (2005-01-12) initialised: dm-devel@redhat.com
[17179677.696000] cdrom: open failed.
[17179678.496000] kjournald starting. Commit interval 5 seconds
[17179678.500000] EXT3 FS on hdb1, internal journal
[17179678.500000] EXT3-fs: mounted filesystem with ordered data mode.
[17179678.548000] kjournald starting. Commit interval 5 seconds
[17179678.556000] EXT3 FS on hdb2, internal journal
[17179678.556000] EXT3-fs: mounted filesystem with ordered data mode.
[17179686.240000] ACPI: Power Button (FF) [PWRF]
[17179686.240000] ACPI: Power Button (CM) [PWRB]
[17179686.240000] ACPI: Sleep Button (CM) [SLPB]
[17179686.408000] ibm_acpi: ec object not found
[17179686.456000] pcc_acpi: loading...
[17179687.488000] powernow: No powernow capabilities detected
[17179696.528000] ppdev: user-space parallel port driver
[17179697.308000] apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac)
[17179697.312000] apm: overridden by ACPI.
[17179697.872000] agpgart: Found an AGP 2.0 compliant device at 0000:00:00.0.
[17179697.872000] agpgart: Putting AGP V2 device at 0000:00:00.0 into 4x mode
[17179697.872000] agpgart: Putting AGP V2 device at 0000:01:00.0 into 4x mode
[17179698.236000] agpgart: Found an AGP 2.0 compliant device at 0000:00:00.0.
[17179698.236000] agpgart: Putting AGP V2 device at 0000:00:00.0 into 4x mode
[17179698.236000] agpgart: Putting AGP V2 device at 0000:01:00.0 into 4x mode
[17179700.184000] Bluetooth: Core ver 2.8
[17179700.184000] NET: Registered protocol family 31
[17179700.184000] Bluetooth: HCI device and connection manager initialized
[17179700.184000] Bluetooth: HCI socket layer initialized
[17179700.324000] Bluetooth: L2CAP ver 2.8
[17179700.324000] Bluetooth: L2CAP socket layer initialized
[17179700.404000] Bluetooth: RFCOMM socket layer initialized
[17179700.404000] Bluetooth: RFCOMM TTY layer initialized
[17179700.404000] Bluetooth: RFCOMM ver 1.7
[17180465.104000] pwc Failed to set LED on/off time.
[17180465.116000] pwc set_video_mode(176x144 @ 10, palette 15).
[17180465.116000] pwc decode_size = 1.
[17180465.116000] pwc Using alternate setting 1.
[17180465.272000] pwc frame_size=18900, vframes=10, vsize=1, vsnapshot=0, vbandlength=630
[17180465.304000] pwc set_video_mode(160x120 @ 10, palette 15).
[17180465.304000] pwc decode_size = 1.
[17180465.304000] pwc Using alternate setting 1.
[17180465.448000] pwc frame_size=18900, vframes=10, vsize=1, vsnapshot=0, vbandlength=630
[17180468.368000] pwc set_video_mode(160x120 @ 10, palette 15).
[17180468.368000] pwc decode_size = 1.
[17180468.368000] pwc Using alternate setting 1.
[17180468.512000] pwc frame_size=18900, vframes=10, vsize=1, vsnapshot=0, vbandlength=630
[17180468.544000] pwc set_video_mode(160x120 @ 10, palette 15).
[17180468.544000] pwc decode_size = 1.
[17180468.544000] pwc Using alternate setting 1.
[17180468.760000] pwc frame_size=18900, vframes=10, vsize=1, vsnapshot=0, vbandlength=630
philippe@ubuntu:~$Voilà, j'espère que ces quelques renseignements vous seront utiles
Dernière modification par pufkine (Le 21/10/2006, à 16:27)
Sous Linux, la positive attitude est de mise et je suis très optimiste pour l'avenir.
Vous êtes victime d'une arnaque sur le net, vous tombez sur des contenus illicite (pedopornographie, haine raciale, ...), vous devez le signaler http://www.ecops.be/webforms/Default.aspx?Lang=FR
Hors ligne
#3 Le 21/10/2006, à 19:12
- philou11
Re : Problèmes graphiques? (résolu)
Voilà, j'ai fais tout bêtement un "sudo apt-get install webcam" , ce qui m'a mis deux fichier à jour puis j'ai tapé "webcam" et il semble que tout les problèmes se soient résolus 
Je vais quand-même attendre un peu pour mettre un "résolu " dans le titre au cas où les problèmes referaient surface !
Sous Linux, la positive attitude est de mise et je suis très optimiste pour l'avenir.
Vous êtes victime d'une arnaque sur le net, vous tombez sur des contenus illicite (pedopornographie, haine raciale, ...), vous devez le signaler http://www.ecops.be/webforms/Default.aspx?Lang=FR
Hors ligne
#4 Le 21/10/2006, à 21:56
- philou11
Re : Problèmes graphiques? (résolu)
Bon, j'ai eu raison de ne pas mettre résolu !!!!!!! Mon ordi a planté après 15 minutes avec TVtime et après le reboot frontal, j'ai du reparamètrer mon clavier 
Et je n'ai de nouveau plus de signal sur ma carte TV ni de webcam !!!!!!!!!
Dernière modification par pufkine (Le 21/10/2006, à 22:03)
Sous Linux, la positive attitude est de mise et je suis très optimiste pour l'avenir.
Vous êtes victime d'une arnaque sur le net, vous tombez sur des contenus illicite (pedopornographie, haine raciale, ...), vous devez le signaler http://www.ecops.be/webforms/Default.aspx?Lang=FR
Hors ligne
#5 Le 21/10/2006, à 22:11
- philou11
Re : Problèmes graphiques? (résolu)
Au premier reboot je n'avais plus de carte son et au deuxième tout est redevenu normal !!!!
Sous Linux, la positive attitude est de mise et je suis très optimiste pour l'avenir.
Vous êtes victime d'une arnaque sur le net, vous tombez sur des contenus illicite (pedopornographie, haine raciale, ...), vous devez le signaler http://www.ecops.be/webforms/Default.aspx?Lang=FR
Hors ligne
#6 Le 22/10/2006, à 13:16
- philou11
Re : Problèmes graphiques? (résolu)
Le problème de freeze avec TVtime est résolu en modifiant un paramètre du programme ! Mais j'ai toujours un soucis d'activation de ma carte TV et de ma cam, ça fonctionne ou pas! J'ai l'impression qu'il y a un conflit entre ces deux périphériques mais je n'arrive pas à le solutionner 
Dernière modification par pufkine (Le 22/10/2006, à 13:16)
Sous Linux, la positive attitude est de mise et je suis très optimiste pour l'avenir.
Vous êtes victime d'une arnaque sur le net, vous tombez sur des contenus illicite (pedopornographie, haine raciale, ...), vous devez le signaler http://www.ecops.be/webforms/Default.aspx?Lang=FR
Hors ligne
#7 Le 25/10/2006, à 18:00
- philou11
Re : Problèmes graphiques? (résolu)
Problème résolu tout seul comme un grand J'ai désinstallé le driver de ma cg Nvidia, ce qui a fait planter mon X11; donc j'ai réinstallé celui par défaut pour pouvoir redémarrer l'interface graphique, puis j'ai refait une installation propre du drivers avec automatix et tout refonctionne à la perfection 
Dernière modification par pufkine (Le 25/10/2006, à 18:00)
Sous Linux, la positive attitude est de mise et je suis très optimiste pour l'avenir.
Vous êtes victime d'une arnaque sur le net, vous tombez sur des contenus illicite (pedopornographie, haine raciale, ...), vous devez le signaler http://www.ecops.be/webforms/Default.aspx?Lang=FR
Hors ligne