Contenu | Rechercher | Menus

Annonce

Si vous rencontrez des soucis à rester connecté sur le forum (ou si vous avez perdu votre mot de passe) déconnectez-vous et reconnectez-vous depuis cette page, en cochant la case "Me connecter automatiquement lors de mes prochaines visites".
Test de l'ISO d'Ubuntu francophone : nous avons besoin de testeurs pour la version francophone d'Ubuntu 14.04. Liens et informations ici.

#1 Le 22/06/2005, à 09:16

bris

[Résolu] insérer le contenu d'un fichier dans le forum

Salut,
ma question est simple : comment faites-vous pour faire les copier/coller de contenu de fichier dans les discution du forum de manière à ce que ce contenu apparaisse comme dans une fenetre, avec la barre de scrolling à droite? c'est pratique, çà prend moins de place en plus big_smile

A+


un vaut mieu que deux ! CQFD

Hors ligne

#2 Le 22/06/2005, à 09:17

playmobitch

Re : [Résolu] insérer le contenu d'un fichier dans le forum

utilise la balise code

Hors ligne

#3 Le 22/06/2005, à 08:39

Wipe

Re : [Résolu] insérer le contenu d'un fichier dans le forum

la balise quote serait plus approprié smile


Linux c'est bien !
Mais avec Ubuntu, c'est encore mieux ! :)

Hors ligne

#4 Le 22/06/2005, à 09:37

playmobitch

Re : [Résolu] insérer le contenu d'un fichier dans le forum

pas sur...il veut la barre de scrolling....

Hors ligne

#5 Le 22/06/2005, à 10:11

bris

Re : [Résolu] insérer le contenu d'un fichier dans le forum

playmobitch a écrit :

pas sur...il veut la barre de scrolling....

: ouais big_smile


un vaut mieu que deux ! CQFD

Hors ligne

#6 Le 22/06/2005, à 13:05

bris

Re : [Résolu] insérer le contenu d'un fichier dans le forum

...donc "code" ?


un vaut mieu que deux ! CQFD

Hors ligne

#7 Le 22/06/2005, à 12:10

sbrunner

Re : [Résolu] insérer le contenu d'un fichier dans le forum

+1

Hors ligne

#8 Le 22/06/2005, à 12:46

playmobitch

Re : [Résolu] insérer le contenu d'un fichier dans le forum

on n'a qu'a voter...
moi je dis qu'il bluffe
et qu'il faut utiliser "code"

Hors ligne

#9 Le 22/06/2005, à 21:51

AlexandreP

Re : [Résolu] insérer le contenu d'un fichier dans le forum

La balise code a aussi l'avantage de conserver la mise en forme.


«La capacité d'apprendre est un don; La faculté d'apprendre est un talent; La volonté d'apprendre est un choix.» -Frank Herbert
93,8% des gens sont capables d'inventer des statistiques sans fournir d'études à l'appui.

Hors ligne

#10 Le 22/06/2005, à 21:58

Wipe

Re : [Résolu] insérer le contenu d'un fichier dans le forum

AlexandreP a écrit :

La balise code a aussi l'avantage de conserver la mise en forme.

Oui mais la balise code est comme son nom l'indique, pour les code tongue


Linux c'est bien !
Mais avec Ubuntu, c'est encore mieux ! :)

Hors ligne

#11 Le 23/06/2005, à 09:30

playmobitch

Re : [Résolu] insérer le contenu d'un fichier dans le forum

et la quote pour les citations....on s'en sort pas la

Hors ligne

#12 Le 23/06/2005, à 09:58

bris

Re : [Résolu] insérer le contenu d'un fichier dans le forum

avec quote :

#
# Sample configuration file for the Samba suite for Debian GNU/Linux.
#
#
# This is the main Samba configuration file. You should read the
# smb.conf(5) manual page in order to understand the options listed
# here. Samba has a huge number of configurable options most of which
# are not shown in this example
#
# Any line which starts with a ; (semi-colon) or a # (hash)
# is a comment and is ignored. In this example we will use a #
# for commentary and a ; for parts of the config file that you
# may wish to enable
#
# NOTE: Whenever you modify this file you should run the command
# "testparm" to check that you have not many any basic syntactic
# errors.
#

#======================= Global Settings =======================

[global]

## Browsing/Identification ###

# Change this to the workgroup/NT-domain name your Samba server will part of
   workgroup = Rcb

# server string is the equivalent of the NT Description field
   server string = Ubuntu Brice

# Windows Internet Name Serving Support Section:
# WINS Support - Tells the NMBD component of Samba to enable its WINS Server
;   wins support = no

# WINS Server - Tells the NMBD components of Samba to be a WINS Client
# Note: Samba can be either a WINS Server, or a WINS Client, but NOT both
;   wins server = w.x.y.z

# If we receive WINS server info from DHCP, override the options above.
   include = /etc/samba/dhcp.conf

# This will prevent nmbd to search for NetBIOS names through DNS.
   dns proxy = no

# What naming service and in what order should we use to resolve host names
# to IP addresses
;   name resolve order = lmhosts host wins bcast


#### Debugging/Accounting ####

# This tells Samba to use a separate log file for each machine
# that connects
   log file = /var/log/samba/log.%m

# Put a capping on the size of the log files (in Kb).
   max log size = 1000

# If you want Samba to only log through syslog then set the following
# parameter to 'yes'.
;   syslog only = no

# We want Samba to log a minimum amount of information to syslog. Everything
# should go to /var/log/samba/log.{smbd,nmbd} instead. If you want to log
# through syslog you should set the following parameter to something higher.
   syslog = 0

# Do something sensible when Samba crashes: mail the admin a backtrace
   panic action = /usr/share/samba/panic-action %d


####### Authentication #######

# "security = user" is always a good idea. This will require a Unix account
# in this server for every user accessing the server. See
# /usr/share/doc/samba-doc/htmldocs/ServerType.html in the samba-doc
# package for details.
;   security = user

# You may wish to use password encryption.  See the section on
# 'encrypt passwords' in the smb.conf(5) manpage before enabling.
   encrypt passwords = true

# If you are using encrypted passwords, Samba will need to know what
# password database type you are using. 
   passdb backend = tdbsam guest

   obey pam restrictions = yes

;   guest account = nobody
   invalid users = root

# This boolean parameter controls whether Samba attempts to sync the Unix
# password with the SMB password when the encrypted SMB password in the
# passdb is changed.
;   unix password sync = no

# For Unix password sync to work on a Debian GNU/Linux system, the following
# parameters must be set (thanks to Augustin Luton <aluton@hybrigenics.fr> for
# sending the correct chat script for the passwd program in Debian Potato).
   passwd program = /usr/bin/passwd %u
   passwd chat = *Enter\snew\sUNIX\spassword:* %n\n *Retype\snew\sUNIX\spassword:* %n\n .

# This boolean controls whether PAM will be used for password changes
# when requested by an SMB client instead of the program listed in
# 'passwd program'. The default is 'no'.
;   pam password change = no


########## Printing ##########

# If you want to automatically load your printer list rather
# than setting them up individually then you'll need this
;   load printers = yes

# lpr(ng) printing. You may wish to override the location of the
# printcap file
;   printing = bsd
;   printcap name = /etc/printcap

# CUPS printing.  See also the cupsaddsmb(8) manpage in the
# cupsys-client package.
;   printing = cups
;   printcap name = cups

# When using [print$], root is implicitly a 'printer admin', but you can
# also give this right to other users to add drivers and set printer
# properties
;   printer admin = @ntadmin


######## File sharing ########

# Name mangling options
;   preserve case = yes
;   short preserve case = yes


############ Misc ############

# Using the following line enables you to customise your configuration
# on a per machine basis. The %m gets replaced with the netbios name
# of the machine that is connecting
;   include = /home/samba/etc/smb.conf.%m

# Most people will find that this option gives better performance.
# See smb.conf(5) and /usr/share/doc/samba-doc/htmldocs/speed.html
# for details
# You may want to add the following on a Linux system:
#         SO_RCVBUF=8192 SO_SNDBUF=8192
   socket options = TCP_NODELAY

# The following parameter is useful only if you have the linpopup package
# installed. The samba maintainer and the linpopup maintainer are
# working to ease installation and configuration of linpopup and samba.
;   message command = /bin/sh -c '/usr/bin/linpopup "%f" "%m" %s; rm %s' &

# Domain Master specifies Samba to be the Domain Master Browser. If this
# machine will be configured as a BDC (a secondary logon server), you
# must set this to 'no'; otherwise, the default behavior is recommended.
;   domain master = auto

# Some defaults for winbind (make sure you're not using the ranges
# for something else.)
;   idmap uid = 10000-20000
;   idmap gid = 10000-20000
;   template shell = /bin/bash

#======================= Share Definitions =======================

wins support = no
[homes]
   comment = Home Directories
   browseable = no

# By default, the home directories are exported read-only. Change next
# parameter to 'yes' if you want to be able to write to them.
   writable = no

# File creation mask is set to 0700 for security reasons. If you want to
# create files with group=rw permissions, set next parameter to 0775.
   create mask = 0700

# Directory creation mask is set to 0700 for security reasons. If you want to
# create dirs. with group=rw permissions, set next parameter to 0775.
   directory mask = 0700

# Un-comment the following and create the netlogon directory for Domain Logons
# (you need to configure Samba to act as a domain controller too.)
;[netlogon]
;   comment = Network Logon Service
;   path = /home/samba/netlogon
;   guest ok = yes
;   writable = no
;   share modes = no

[printers]
   comment = All Printers
   browseable = no
   path = /tmp
   printable = yes
   public = no
   writable = no
   create mode = 0700

# Windows clients look for this share name as a source of downloadable
# printer drivers
[print$]
   comment = Printer Drivers
   path = /var/lib/samba/printers
   browseable = yes
   read only = yes
   guest ok = no
# Uncomment to allow remote administration of Windows print drivers.
# Replace 'ntadmin' with the name of the group your admin users are
# members of.
;   write list = root, @ntadmin

# A sample share for sharing your CD-ROM with others.
;[cdrom]
;   comment = Samba server's CD-ROM
;   writable = no
;   locking = no
;   path = /cdrom
;   public = yes

# The next two parameters show how to auto-mount a CD-ROM when the
#    cdrom share is accesed. For this to work /etc/fstab must contain
#    an entry like this:
#
#       /dev/scd0   /cdrom  iso9660 defaults,noauto,ro,user   0 0
#
# The CD-ROM gets unmounted automatically after the connection to the
#
# If you don't want to use auto-mounting/unmounting make sure the CD
#    is mounted on /cdrom
#
;   preexec = /bin/mount /cdrom
;   postexec = /bin/umount /cdrom


[4Go]
path = /home/brice/Desktop/4go
comment = essai Samba
available = yes
browseable = yes
public = yes
writable = yes

avec code :

#
# Sample configuration file for the Samba suite for Debian GNU/Linux.
#
#
# This is the main Samba configuration file. You should read the
# smb.conf(5) manual page in order to understand the options listed
# here. Samba has a huge number of configurable options most of which 
# are not shown in this example
#
# Any line which starts with a ; (semi-colon) or a # (hash) 
# is a comment and is ignored. In this example we will use a #
# for commentary and a ; for parts of the config file that you
# may wish to enable
#
# NOTE: Whenever you modify this file you should run the command
# "testparm" to check that you have not many any basic syntactic 
# errors. 
#

#======================= Global Settings =======================

[global]

## Browsing/Identification ###

# Change this to the workgroup/NT-domain name your Samba server will part of
   workgroup = Rcb

# server string is the equivalent of the NT Description field
   server string = Ubuntu Brice

# Windows Internet Name Serving Support Section:
# WINS Support - Tells the NMBD component of Samba to enable its WINS Server
;   wins support = no

# WINS Server - Tells the NMBD components of Samba to be a WINS Client
# Note: Samba can be either a WINS Server, or a WINS Client, but NOT both
;   wins server = w.x.y.z

# If we receive WINS server info from DHCP, override the options above. 
   include = /etc/samba/dhcp.conf

# This will prevent nmbd to search for NetBIOS names through DNS.
   dns proxy = no

# What naming service and in what order should we use to resolve host names
# to IP addresses
;   name resolve order = lmhosts host wins bcast


#### Debugging/Accounting ####

# This tells Samba to use a separate log file for each machine
# that connects
   log file = /var/log/samba/log.%m

# Put a capping on the size of the log files (in Kb).
   max log size = 1000

# If you want Samba to only log through syslog then set the following
# parameter to 'yes'.
;   syslog only = no

# We want Samba to log a minimum amount of information to syslog. Everything
# should go to /var/log/samba/log.{smbd,nmbd} instead. If you want to log
# through syslog you should set the following parameter to something higher.
   syslog = 0

# Do something sensible when Samba crashes: mail the admin a backtrace
   panic action = /usr/share/samba/panic-action %d


####### Authentication #######

# "security = user" is always a good idea. This will require a Unix account
# in this server for every user accessing the server. See
# /usr/share/doc/samba-doc/htmldocs/ServerType.html in the samba-doc
# package for details.
;   security = user

# You may wish to use password encryption.  See the section on
# 'encrypt passwords' in the smb.conf(5) manpage before enabling.
   encrypt passwords = true

# If you are using encrypted passwords, Samba will need to know what
# password database type you are using.  
   passdb backend = tdbsam guest

   obey pam restrictions = yes

;   guest account = nobody
   invalid users = root

# This boolean parameter controls whether Samba attempts to sync the Unix
# password with the SMB password when the encrypted SMB password in the
# passdb is changed.
;   unix password sync = no

# For Unix password sync to work on a Debian GNU/Linux system, the following
# parameters must be set (thanks to Augustin Luton <aluton@hybrigenics.fr> for
# sending the correct chat script for the passwd program in Debian Potato).
   passwd program = /usr/bin/passwd %u
   passwd chat = *Enter\snew\sUNIX\spassword:* %n\n *Retype\snew\sUNIX\spassword:* %n\n .

# This boolean controls whether PAM will be used for password changes
# when requested by an SMB client instead of the program listed in
# 'passwd program'. The default is 'no'.
;   pam password change = no


########## Printing ##########

# If you want to automatically load your printer list rather
# than setting them up individually then you'll need this
;   load printers = yes

# lpr(ng) printing. You may wish to override the location of the
# printcap file
;   printing = bsd
;   printcap name = /etc/printcap

# CUPS printing.  See also the cupsaddsmb(8) manpage in the
# cupsys-client package.
;   printing = cups
;   printcap name = cups

# When using [print$], root is implicitly a 'printer admin', but you can
# also give this right to other users to add drivers and set printer
# properties
;   printer admin = @ntadmin


######## File sharing ########

# Name mangling options
;   preserve case = yes
;   short preserve case = yes


############ Misc ############

# Using the following line enables you to customise your configuration
# on a per machine basis. The %m gets replaced with the netbios name
# of the machine that is connecting
;   include = /home/samba/etc/smb.conf.%m

# Most people will find that this option gives better performance.
# See smb.conf(5) and /usr/share/doc/samba-doc/htmldocs/speed.html
# for details
# You may want to add the following on a Linux system:
#         SO_RCVBUF=8192 SO_SNDBUF=8192
   socket options = TCP_NODELAY

# The following parameter is useful only if you have the linpopup package
# installed. The samba maintainer and the linpopup maintainer are
# working to ease installation and configuration of linpopup and samba.
;   message command = /bin/sh -c '/usr/bin/linpopup "%f" "%m" %s; rm %s' &

# Domain Master specifies Samba to be the Domain Master Browser. If this
# machine will be configured as a BDC (a secondary logon server), you
# must set this to 'no'; otherwise, the default behavior is recommended.
;   domain master = auto

# Some defaults for winbind (make sure you're not using the ranges
# for something else.)
;   idmap uid = 10000-20000
;   idmap gid = 10000-20000
;   template shell = /bin/bash

#======================= Share Definitions =======================

wins support = no
[homes]
   comment = Home Directories
   browseable = no

# By default, the home directories are exported read-only. Change next
# parameter to 'yes' if you want to be able to write to them.
   writable = no

# File creation mask is set to 0700 for security reasons. If you want to
# create files with group=rw permissions, set next parameter to 0775.
   create mask = 0700

# Directory creation mask is set to 0700 for security reasons. If you want to
# create dirs. with group=rw permissions, set next parameter to 0775.
   directory mask = 0700

# Un-comment the following and create the netlogon directory for Domain Logons
# (you need to configure Samba to act as a domain controller too.)
;[netlogon]
;   comment = Network Logon Service
;   path = /home/samba/netlogon
;   guest ok = yes
;   writable = no
;   share modes = no

[printers]
   comment = All Printers
   browseable = no
   path = /tmp
   printable = yes
   public = no
   writable = no
   create mode = 0700

# Windows clients look for this share name as a source of downloadable
# printer drivers
[print$]
   comment = Printer Drivers
   path = /var/lib/samba/printers
   browseable = yes
   read only = yes
   guest ok = no
# Uncomment to allow remote administration of Windows print drivers.
# Replace 'ntadmin' with the name of the group your admin users are
# members of.
;   write list = root, @ntadmin

# A sample share for sharing your CD-ROM with others.
;[cdrom]
;   comment = Samba server's CD-ROM
;   writable = no
;   locking = no
;   path = /cdrom
;   public = yes

# The next two parameters show how to auto-mount a CD-ROM when the
#	cdrom share is accesed. For this to work /etc/fstab must contain
#	an entry like this:
#
#       /dev/scd0   /cdrom  iso9660 defaults,noauto,ro,user   0 0
#
# The CD-ROM gets unmounted automatically after the connection to the
#
# If you don't want to use auto-mounting/unmounting make sure the CD
#	is mounted on /cdrom
#
;   preexec = /bin/mount /cdrom
;   postexec = /bin/umount /cdrom


[4Go]
path = /home/brice/Desktop/4go
comment = essai Samba
available = yes
browseable = yes
public = yes
writable = yes

Nan, c'est vraiment mieu avec code, çà prend moins de place, en fait chacun fait ce qu'il veut mais sigmut aurait surement susscurer que c'est une question d'Ego big_smile

Dernière modification par bris (Le 23/06/2005, à 09:59)


un vaut mieu que deux ! CQFD

Hors ligne

#13 Le 23/06/2005, à 12:24

bris

Re : [Résolu] insérer le contenu d'un fichier dans le forum

Au fait, je voudrais mettre "résolu" mais quand je clique sur "modifier" sur mon premier message, je n'ai pas le champs du titre et en fait, sur plus d'une discution c'est comme çà depuis hier... d'ou vient le problème? modo?:)

Dernière modification par bris (Le 23/06/2005, à 12:25)


un vaut mieu que deux ! CQFD

Hors ligne

#14 Le 23/06/2005, à 12:37

Yann

Re : [Résolu] insérer le contenu d'un fichier dans le forum

neutral:|:|:|

Bah je te dirais bien mais meme moi je peux pas modifier le truc.. neutral
Il y a des problèmes de date sur le serveur... mais alors vazy trouver le lien.. je cherche..

[Edit] T'as des exemples d'autres topic qui fonctionnent pas?
[Edit2] J'ai une idée, je pense que c'est parce que le topic est peut etre daté plus récent que certaines réponses, idée en l'air, je vérifie.


Et pourtant moi, jsuis pas du genre délicat,
Dans un coin de la musse, j'ai posé mon matelas
- Paulo Anarkao

Hors ligne

#15 Le 23/06/2005, à 12:43

Yann

Re : [Résolu] insérer le contenu d'un fichier dans le forum

CQFD, le 3e message a une daté antérieure au sujet du topic, à cause d'un réglage à l'heure du serveur. C'est donc celui la que je veux modifier pr changer le titre du topic roll lol Il n'y aura plus ce problème dorénavant ne vous en faites pas wink


Et pourtant moi, jsuis pas du genre délicat,
Dans un coin de la musse, j'ai posé mon matelas
- Paulo Anarkao

Hors ligne

#16 Le 23/06/2005, à 12:52

bris

Re : [Résolu] insérer le contenu d'un fichier dans le forum

bravo Yann:D
j'ai le meme problème  là http://forum.ubuntu-fr.org/viewtopic.ph … 942#p46942, le second message est plus jeune que le premier, c'est fantastique ce forum, on te répond avant meme que tu ais poser ta question lol:lol::lol:

PS : Je ne sais si c'est lié, mais hier j'ai eu un mal fou sur pas mal de discution ò ajouter des réponses, le message me répétait inlassablement qu'il fallait un délai de....je ne me souviens plus combien de seconde! à la fin , j'y suis quand meme arrivé big_smile

Dernière modification par bris (Le 23/06/2005, à 12:55)


un vaut mieu que deux ! CQFD

Hors ligne

#17 Le 23/06/2005, à 13:29

Yann

Re : [Résolu] insérer le contenu d'un fichier dans le forum

Toujours ce pb de date, qui devrait etre réglé maintenant wink


Et pourtant moi, jsuis pas du genre délicat,
Dans un coin de la musse, j'ai posé mon matelas
- Paulo Anarkao

Hors ligne

#18 Le 23/06/2005, à 13:31

Wipe

Re : [Résolu] insérer le contenu d'un fichier dans le forum

Yann a écrit :

CQFD, le 3e message a une daté antérieure au sujet du topic, à cause d'un réglage à l'heure du serveur. C'est donc celui la que je veux modifier pr changer le titre du topic roll lol Il n'y aura plus ce problème dorénavant ne vous en faites pas wink

Zut c'est ma faute tongue


Linux c'est bien !
Mais avec Ubuntu, c'est encore mieux ! :)

Hors ligne

Haut de page ↑