#1 Le 28/10/2006, à 13:31
- siddhartha007
ati mobility radeon 9700
Bonjour à tous!
Je suis un peu palmé en ce qui concerne le monde linux que je découvre peu à peu, mais j'ai fait la mise à jour vers edgy hier et je me suis que tant qu'à faire je pourrais activer l'accélération 3d... bref, j'ai essayé pas mal de choses depuis plusieurs heures, et rien n'a l'air d'aboutir.
Je vais essayer de vous mettre le max d'info d'après ce que j'ai compris être important (mais sans doute que je vais oublier des choses).
Alors le xorg.conf d'abord (je l'ai changé plein de fois mais comme le serveux X démarrait plus je l'ai remis comme il était il y a un petit moment):
# /etc/X11/xorg.conf (xorg X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the /etc/X11/xorg.conf manual page.
# (Type "man /etc/X11/xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
# sudo dpkg-reconfigure -phigh xserver-xorg
Section "Files"
FontPath "/usr/share/X11/fonts/misc"
FontPath "/usr/share/X11/fonts/cyrillic"
FontPath "/usr/share/X11/fonts/100dpi/:unscaled"
FontPath "/usr/share/X11/fonts/75dpi/:unscaled"
FontPath "/usr/share/X11/fonts/Type1"
FontPath "/usr/share/X11/fonts/100dpi"
FontPath "/usr/share/X11/fonts/75dpi"
FontPath "/usr/share/fonts/X11/misc"
# path to defoma fonts
FontPath "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
EndSection
Section "Module"
Load "bitmap"
Load "ddc"
Load "dri"
Load "extmod"
Load "freetype"
Load "glx"
Load "int10"
Load "type1"
Load "vbe"
EndSection
Section "InputDevice"
Identifier "Generic Keyboard"
Driver "kbd"
Option "CoreKeyboard"
Option "XkbRules" "xorg"
Option "XkbModel" "pc105"
Option "XkbLayout" "fr"
Option "XkbVariant" "latin9"
EndSection
Section "InputDevice"
Identifier "Configured Mouse"
Driver "mouse"
Option "CorePointer"
Option "Device" "/dev/input/mice"
Option "Protocol" "ExplorerPS/2"
Option "ZAxisMapping" "4 5"
Option "Emulate3Buttons" "true"
EndSection
Section "InputDevice"
Identifier "Synaptics Touchpad"
Driver "synaptics"
Option "SendCoreEvents" "true"
Option "Device" "/dev/psaux"
Option "Protocol" "auto-dev"
Option "HorizScrollDelta" "0"
EndSection
Section "InputDevice"
Driver "wacom"
Identifier "stylus"
Option "Device" "/dev/wacom" # Change to
# /dev/input/event
# for USB
Option "Type" "stylus"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection
Section "InputDevice"
Driver "wacom"
Identifier "eraser"
Option "Device" "/dev/wacom" # Change to
# /dev/input/event
# for USB
Option "Type" "eraser"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection
Section "InputDevice"
Driver "wacom"
Identifier "cursor"
Option "Device" "/dev/wacom" # Change to
# /dev/input/event
# for USB
Option "Type" "cursor"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection
Section "Device"
Identifier "ATI Technologies, Inc. RV350 NP [Mobility Radeon 9600/9700 M10/M11]"
Driver "fglrx"
BusID "PCI:1:0:0"
EndSection
Section "Monitor"
Identifier "Generic Monitor"
Option "DPMS"
HorizSync 28-51
VertRefresh 43-60
EndSection
Section "Screen"
Identifier "Default Screen"
Device "ATI Technologies, Inc. RV350 NP [Mobility Radeon 9600/9700 M10/M11]"
Monitor "Generic Monitor"
DefaultDepth 24
SubSection "Display"
Depth 1
Modes "1280x800" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 4
Modes "1280x800" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 8
Modes "1280x800" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 15
Modes "1280x800" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 16
Modes "1280x800" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 24
Modes "1280x800" "1024x768" "800x600" "640x480"
EndSubSection
EndSection
Section "ServerLayout"
Identifier "Default Layout"
Screen "Default Screen"
InputDevice "Generic Keyboard"
InputDevice "Configured Mouse"
InputDevice "stylus" "SendCoreEvents"
InputDevice "cursor" "SendCoreEvents"
InputDevice "eraser" "SendCoreEvents"
InputDevice "Synaptics Touchpad"
EndSection
Section "DRI"
Mode 0666
EndSectionSi j'ai bien compris, vu le truc, il va essayer d'utiliser le driver fglrx pour ma carte 3d.
glxinfo ensuite:
siddhartha@blackmamba:~$ glxinfo | grep direct
Xlib: extension "XFree86-DRI" missing on display ":0.0".
direct rendering: No
OpenGL renderer string: Mesa GLX Indirectfireglcontrol m'ouvre une fenetre ATI et me dit que j'utilise le driver version 8.28.08.
Bref, j'ai essayé un certain nombre de choses et je n'ai jamais réussi à avoir "direct rendering: Yes".
Si une bonne âme se dévoue pour m'aider un peu je serai content (mais je préviens, je vais sans doute poser des questions débiles :-) )
siddhartha
#2 Le 28/10/2006, à 13:36
- siddhartha007
Re : ati mobility radeon 9700
Ah oui il faudrait que je précise que quand j'ai voulu installer le driver libre et donc virer fglrx, synaptic m'a fait un peu peur parce qu'il disait que si je désinstallais le paquet xorg-driver-fglrx il fallait aussi du coup désinstaller plein d'autres trucs (fglrx-control,ubuntu desktop, xorg,x-window-system-core,xorg et plein de trucs qui commencent par xserver) donc j'ai pas trop osé le faire. peut-etre que le problème vient entre autres de là...
#3 Le 28/10/2006, à 13:58
- siddhartha007
Re : ati mobility radeon 9700
Je continue à donner les infos: y'a ceci qui est écrit dans le fichier Xorg.0.log:
(WW) fglrx(0): ***********************************************
(WW) fglrx(0): * DRI initialization failed! *
(WW) fglrx(0): * (maybe driver kernel module missing or bad) *
(WW) fglrx(0): * 2D acceleraton available (MMIO) *
(WW) fglrx(0): * no 3D acceleration available *
(WW) fglrx(0): ********************************************* *Si c'est nécessaire je peux aussi copier tout le fichier...
#4 Le 29/10/2006, à 18:01
- siddhartha007
Re : ati mobility radeon 9700
bon tout ca a l'air d'etre réglé.
#5 Le 30/10/2006, à 11:28
- Djrem
Re : ati mobility radeon 9700
J'ai exactement le même problème que toi mais moi c'est une Radeon 9600 pro. Est ce que tu as réussi à régler ton problème parce que moi ça fait deux semaines que je suis dessus à lire partout des trucs pour régler le pb mais rien à faire je n'y arrive pas. As tu des infos ?
#6 Le 30/10/2006, à 12:02
- dom le vrai
Re : ati mobility radeon 9700
Même problème, et toujours pas réglé (aussi pour une ATI 9700 Mobility). Je suis preneur pour des infos.
Hors ligne
#7 Le 31/10/2006, à 03:15
- little
Re : ati mobility radeon 9700
Bon bah meme probleme pour moi aussi j'ai installé les pilotes j'ai modifié Xorg.0.log, xorg.conf mais rien n'y fait, toujours pas d'accélération 3D, aidez nous je vous en supplie !!
#8 Le 31/10/2006, à 03:24
- Stemp
Re : ati mobility radeon 9700
siddhartha007 a écrit :
(WW) fglrx(0): * (maybe driver kernel module missing or bad) *
Est ce que vous avez bien installé les paquets suivants :
fglrx-kernel-source - ATI binary kernel module source
et selon votre kernel :
linux-restricted-modules-2.6.17-10-386 - Non-free Linux 2.6.17 modules on 386
ou
linux-restricted-modules-2.6.17-10-generic - Non-free Linux 2.6.17 modules on x86_64 generic
«La violence n'a jamais rien réglé» Gengis Khan 1162-1227
Blog | Crunchbang Linux | Arch Linux
Hors ligne
#9 Le 31/10/2006, à 03:31
- little
Re : ati mobility radeon 9700
je viens de le faire pour le kernel-source mais ça ne change rien 
#10 Le 01/11/2006, à 13:27
- siddhartha007
Re : ati mobility radeon 9700
Finalement j'ai viré tous les trucs fglrx et j'ai utilisé le driver libre radeon qui a l'air de bien fonctionner bien chez moi. je copie ci-dessous mon xorg.conf. y'a juste un truc, je sais pas bien ce que ca veut dire peut-etre que quelqu'un peut m'aider.
siddhartha@blackmamba:~$ glxinfo |grep direct
libGL warning: 3D driver claims to not support visual 0x4b
direct rendering: YesLa première ligne "warning" ca veut dire quoi?
voici le xorg.conf:
# /etc/X11/xorg.conf (xorg X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the /etc/X11/xorg.conf manual page.
# (Type "man /etc/X11/xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
# sudo dpkg-reconfigure -phigh xserver-xorg
Section "Files"
FontPath "/usr/share/X11/fonts/misc"
FontPath "/usr/share/X11/fonts/cyrillic"
FontPath "/usr/share/X11/fonts/100dpi/:unscaled"
FontPath "/usr/share/X11/fonts/75dpi/:unscaled"
FontPath "/usr/share/X11/fonts/Type1"
FontPath "/usr/share/X11/fonts/100dpi"
FontPath "/usr/share/X11/fonts/75dpi"
FontPath "/usr/share/fonts/X11/misc"
# path to defoma fonts
FontPath "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
EndSection
Section "Module"
Load "i2c"
Load "bitmap"
Load "ddc"
Load "dri"
Load "extmod"
Load "freetype"
Load "glx"
Load "int10"
Load "type1"
Load "vbe"
EndSection
Section "Extensions"
Option "RENDER" "Enable"
EndSection
Section "InputDevice"
Identifier "Generic Keyboard"
Driver "kbd"
Option "CoreKeyboard"
Option "XkbRules" "xorg"
Option "XkbModel" "pc105"
Option "XkbLayout" "fr"
Option "XkbOptions" "lv3:ralt_switch"
EndSection
Section "InputDevice"
Identifier "Configured Mouse"
Driver "mouse"
Option "CorePointer"
Option "Device" "/dev/input/mice"
Option "Protocol" "ExplorerPS/2"
Option "ZAxisMapping" "4 5"
Option "Emulate3Buttons" "true"
EndSection
Section "InputDevice"
Identifier "Synaptics Touchpad"
Driver "synaptics"
Option "SendCoreEvents" "true"
Option "Device" "/dev/psaux"
Option "Protocol" "auto-dev"
Option "HorizScrollDelta" "0"
EndSection
Section "InputDevice"
Driver "wacom"
Identifier "stylus"
Option "Device" "/dev/wacom" # Change to
# /dev/input/event
# for USB
Option "Type" "stylus"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection
Section "InputDevice"
Driver "wacom"
Identifier "eraser"
Option "Device" "/dev/wacom" # Change to
# /dev/input/event
# for USB
Option "Type" "eraser"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection
Section "InputDevice"
Driver "wacom"
Identifier "cursor"
Option "Device" "/dev/wacom" # Change to
# /dev/input/event
# for USB
Option "Type" "cursor"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection
Section "Device"
Identifier "ATI Technologies, Inc. RV350 NP [Mobility Radeon 9600/9700 M10/M11]"
Driver "radeon"
BusID "PCI:1:0:0"
Option "AccelMethod" "XAA" # Use XFree86 Acceleration Architecture
Option "AccelDFS" "1" # mettez à 0 si vous avez une carte AGP
# Option "AGPMode" "4" # Décommentez si vous avez une carte AGP
# Option "AGPSize" "128" # Décommentez si vous avec une carte AGP AGP aperture size
Option "GARTSize" "64"
Option "RingSize" "8"
Option "BufferSize" "2"
Option "EnablePageFlip" "1" # Enable page flipping for 3D apps
Option "ColorTiling" "1"
Option "EnableDepthMoves" "yes"
Option "UseFBDev" "false"
Option "RenderAccel" "true" # Enable the hardware render acceleration
Option "mtrr" "on"
Option "SubPixelOrder" "none"
Option "DPMS"
Option "DynamicClocks" "on"
EndSection
Section "Monitor"
Identifier "Generic Monitor"
Option "DPMS"
EndSection
Section "Screen"
Identifier "Default Screen"
Device "ATI Technologies, Inc. RV350 NP [Mobility Radeon 9600/9700 M10/M11]"
Monitor "Generic Monitor"
DefaultDepth 24
SubSection "Display"
Depth 1
Modes "1280x800"
EndSubSection
SubSection "Display"
Depth 4
Modes "1280x800"
EndSubSection
SubSection "Display"
Depth 8
Modes "1280x800"
EndSubSection
SubSection "Display"
Depth 15
Modes "1280x800"
EndSubSection
SubSection "Display"
Depth 16
Modes "1280x800"
EndSubSection
SubSection "Display"
Depth 24
Modes "1280x800"
EndSubSection
EndSection
Section "ServerLayout"
Identifier "Default Layout"
Screen "Default Screen"
InputDevice "Generic Keyboard"
InputDevice "Configured Mouse"
InputDevice "stylus" "SendCoreEvents"
InputDevice "cursor" "SendCoreEvents"
InputDevice "eraser" "SendCoreEvents"
InputDevice "Synaptics Touchpad"
EndSection
Section "DRI"
Mode 0666
EndSectionvoila bon courage.
#11 Le 01/11/2006, à 15:02
- cicio
Re : ati mobility radeon 9700
siddhartha007 a écrit :
La première ligne "warning" ca veut dire quoi?
salut,
j'ai moi aussi cette ligne ça n'empeche en rien la 3D, il s'agit simplement d'une lacune du driver libre qui sera peut etre comblée à l'avenir, mais qui ne gene pas le fonctionnement de la 3D..
@+
Hors ligne
#12 Le 10/11/2006, à 21:13
- little28
Re : ati mobility radeon 9700
Au fait, l'accélération 3D est elle necessaire en dehors des jeux ? Est ce que ça améliore les performances de Ubuntu ?
Merci
Hors ligne
#13 Le 13/11/2006, à 23:28
- Djrem
Re : ati mobility radeon 9700
Alors moi quand je mets exactement la même config pour le Xorg et que tout les composants fglrx sont désinstallés et que j'ai enlevé fglrx dans /etc/modules et ben j'obtiens un bel écran noir au démmarage du serveur graphique. Je comprends vraiment pas ce qu'il se passe. Si quelqu'un peut m'aider parce que je veux bien utiliser les drivers libres mais bon si il ne marche ...
Merci d'avance
Kubuntu 20.04.1 LTS | AMD Ryzen 5-1500X | CM Gigabyte AB350-Gaming3 | RAM 2*4Go GSKILL DDR4 | SSD Samsung 860 Evo 1To+ 850 Evo 500Go | CG MSI Geforce GTX1050TI 4Go | Écran BenQ FP91GX | Clavier Logitech solar wireless | Logitech G502 Lightspeed | Boitier Thermaltake Suppressor F31 | Wacom Bamboo Fun CTH-461 | NAS Synology Ds216 2*2To
Hors ligne
#14 Le 13/11/2006, à 23:41
- Djrem
Re : ati mobility radeon 9700
voici mon xorg0.log
X Window System Version 7.1.1
Release Date: 12 May 2006
X Protocol Version 11, Revision 0, Release 7.1.1
Build Operating System: Linux 2.6.15.7 i686
Current Operating System: Linux djrem 2.6.17-10-generic #2 SMP Fri Oct 13 18:45:35 UTC 2006 i686
Build Date: 07 July 2006
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Module Loader present
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Sun Nov 12 23:25:31 2006
(==) Using config file: "/etc/X11/xorg.conf"
(==) ServerLayout "Default Layout"
(**) |-->Screen "Default Screen" (0)
(**) | |-->Monitor "Philips 170C"
(**) | |-->Device "ATI Technologies, Inc. RV350 AP [Radeon 9600]"
(**) |-->Input Device "Generic Keyboard"
(**) |-->Input Device "Configured Mouse"
(WW) The directory "/usr/share/X11/fonts/misc" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/share/X11/fonts/cyrillic" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/share/X11/fonts/100dpi/" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/share/X11/fonts/75dpi/" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/share/X11/fonts/Type1" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/share/X11/fonts/100dpi" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/share/X11/fonts/75dpi" does not exist.
Entry deleted from font path.
(WW) `fonts.dir' not found (or not valid) in "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType".
Entry deleted from font path.
(Run 'mkfontdir' on "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType").
(**) FontPath set to:
/usr/share/fonts/X11/misc,
/usr/share/fonts/X11/misc/,
/usr/share/fonts/X11/TTF/,
/usr/share/fonts/X11/OTF,
/usr/share/fonts/X11/Type1/,
/usr/share/fonts/X11/CID/,
/usr/share/fonts/X11/100dpi/,
/usr/share/fonts/X11/75dpi/
(==) RgbPath set to "/usr/share/X11/rgb"
(==) ModulePath set to "/usr/lib/xorg/modules"
(**) Extension "RENDER" is enabled
(II) Open ACPI successful (/var/run/acpid.socket)
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.3
X.Org Video Driver: 1.0
X.Org XInput driver : 0.6
X.Org Server Extension : 0.3
X.Org Font Renderer : 0.5
(II) Loader running on linux
(II) LoadModule: "bitmap"
(II) Loading /usr/lib/xorg/modules/fonts/libbitmap.so
(II) Module bitmap: vendor="X.Org Foundation"
compiled for 7.1.1, module version = 1.0.0
Module class: X.Org Font Renderer
ABI class: X.Org Font Renderer, version 0.5
(II) Loading font Bitmap
(II) LoadModule: "pcidata"
(II) Loading /usr/lib/xorg/modules/libpcidata.so
(II) Module pcidata: vendor="X.Org Foundation"
compiled for 7.1.1, module version = 1.0.0
ABI class: X.Org Video Driver, version 1.0
(++) using VT number 7
(II) PCI: PCI scan (all values are in hex)
(II) PCI: 00:00:0: chip 1106,3189 card 1106,3189 rev 00 class 06,00,00 hdr 00
(II) PCI: 00:01:0: chip 1106,b168 card 0000,0000 rev 00 class 06,04,00 hdr 01
(II) PCI: 00:10:0: chip 1106,3038 card 1106,3038 rev 80 class 0c,03,00 hdr 80
(II) PCI: 00:10:1: chip 1106,3038 card 1106,3038 rev 80 class 0c,03,00 hdr 80
(II) PCI: 00:10:2: chip 1106,3038 card 1106,3038 rev 80 class 0c,03,00 hdr 80
(II) PCI: 00:10:3: chip 1106,3104 card 1106,3104 rev 82 class 0c,03,20 hdr 00
(II) PCI: 00:11:0: chip 1106,3177 card 1106,3177 rev 00 class 06,01,00 hdr 80
(II) PCI: 00:11:1: chip 1106,0571 card 1106,0571 rev 06 class 01,01,8a hdr 00
(II) PCI: 00:11:5: chip 1106,3059 card 15bd,1001 rev 50 class 04,01,00 hdr 00
(II) PCI: 00:14:0: chip 1516,0803 card 1516,0803 rev 00 class 02,00,00 hdr 00
(II) PCI: 01:00:0: chip 1002,4150 card 174b,7c19 rev 00 class 03,00,00 hdr 80
(II) PCI: 01:00:1: chip 1002,4170 card 174b,7c18 rev 00 class 03,80,00 hdr 00
(II) PCI: End of PCI scan
(II) Host-to-PCI bridge:
(II) Bus 0: bridge is at (0:0:0), (0,0,1), BCTRL: 0x0008 (VGA_EN is set)
(II) Bus 0 I/O range:
[0] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[b]
(II) Bus 0 non-prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[b]
(II) Bus 0 prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[b]
(II) PCI-to-PCI bridge:
(II) Bus 1: bridge is at (0:1:0), (0,1,1), BCTRL: 0x000c (VGA_EN is set)
(II) Bus 1 I/O range:
[0] -1 0 0x0000c000 - 0x0000c0ff (0x100) IX[b]
[1] -1 0 0x0000c400 - 0x0000c4ff (0x100) IX[b]
[2] -1 0 0x0000c800 - 0x0000c8ff (0x100) IX[b]
[3] -1 0 0x0000cc00 - 0x0000ccff (0x100) IX[b]
(II) Bus 1 non-prefetchable memory range:
[0] -1 0 0xe8000000 - 0xe9ffffff (0x2000000) MX[b]
(II) Bus 1 prefetchable memory range:
[0] -1 0 0xc0000000 - 0xdfffffff (0x20000000) MX[b]
(II) PCI-to-ISA bridge:
(II) Bus -1: bridge is at (0:17:0), (0,-1,-1), BCTRL: 0x0008 (VGA_EN is set)
(--) PCI:*(1:0:0) ATI Technologies Inc RV350 AP [Radeon 9600] rev 0, Mem @ 0xc0000000/28, 0xe9000000/16, I/O @ 0xc000/8
(--) PCI: (1:0:1) ATI Technologies Inc RV350 AP [Radeon 9600] (Secondary) rev 0, Mem @ 0xd0000000/28, 0xe9010000/16
(II) Addressable bus resource ranges are
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[b]
[1] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[b]
(II) OS-reported resource ranges:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[5] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
(II) PCI Memory resource overlap reduced 0xe0000000 from 0xe7ffffff to 0xdfffffff
(II) Active PCI resource ranges:
[0] -1 0 0xeb000000 - 0xeb0003ff (0x400) MX[b]
[1] -1 0 0xeb001000 - 0xeb0010ff (0x100) MX[b]
[2] -1 0 0xe0000000 - 0xdfffffff (0x0) MX[b]O
[3] -1 0 0xe9000000 - 0xe900ffff (0x10000) MX[b](B)
[4] -1 0 0xc0000000 - 0xcfffffff (0x10000000) MX[b](B)
[5] -1 0 0x0000e400 - 0x0000e4ff (0x100) IX[b]
[6] -1 0 0x0000e000 - 0x0000e0ff (0x100) IX[b]
[7] -1 0 0x0000dc00 - 0x0000dc0f (0x10) IX[b]
[8] -1 0 0x0000d800 - 0x0000d81f (0x20) IX[b]
[9] -1 0 0x0000d400 - 0x0000d41f (0x20) IX[b]
[10] -1 0 0x0000d000 - 0x0000d01f (0x20) IX[b]
[11] -1 0 0x0000c000 - 0x0000c0ff (0x100) IX[b](B)
(II) Inactive PCI resource ranges:
[0] -1 0 0xe9010000 - 0xe901ffff (0x10000) MX[b](B)
[1] -1 0 0xd0000000 - 0xdfffffff (0x10000000) MX[b](B)
(II) Active PCI resource ranges after removing overlaps:
[0] -1 0 0xeb000000 - 0xeb0003ff (0x400) MX[b]
[1] -1 0 0xeb001000 - 0xeb0010ff (0x100) MX[b]
[2] -1 0 0xe0000000 - 0xdfffffff (0x0) MX[b]O
[3] -1 0 0xe9000000 - 0xe900ffff (0x10000) MX[b](B)
[4] -1 0 0xc0000000 - 0xcfffffff (0x10000000) MX[b](B)
[5] -1 0 0x0000e400 - 0x0000e4ff (0x100) IX[b]
[6] -1 0 0x0000e000 - 0x0000e0ff (0x100) IX[b]
[7] -1 0 0x0000dc00 - 0x0000dc0f (0x10) IX[b]
[8] -1 0 0x0000d800 - 0x0000d81f (0x20) IX[b]
[9] -1 0 0x0000d400 - 0x0000d41f (0x20) IX[b]
[10] -1 0 0x0000d000 - 0x0000d01f (0x20) IX[b]
[11] -1 0 0x0000c000 - 0x0000c0ff (0x100) IX[b](B)
(II) Inactive PCI resource ranges after removing overlaps:
[0] -1 0 0xe9010000 - 0xe901ffff (0x10000) MX[b](B)
[1] -1 0 0xd0000000 - 0xdfffffff (0x10000000) MX[b](B)
(II) OS-reported resource ranges after removing overlaps with PCI:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[5] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
(II) All system resource ranges:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0xeb000000 - 0xeb0003ff (0x400) MX[b]
[5] -1 0 0xeb001000 - 0xeb0010ff (0x100) MX[b]
[6] -1 0 0xe0000000 - 0xdfffffff (0x0) MX[b]O
[7] -1 0 0xe9000000 - 0xe900ffff (0x10000) MX[b](B)
[8] -1 0 0xc0000000 - 0xcfffffff (0x10000000) MX[b](B)
[9] -1 0 0xe9010000 - 0xe901ffff (0x10000) MX[b](B)
[10] -1 0 0xd0000000 - 0xdfffffff (0x10000000) MX[b](B)
[11] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[12] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
[13] -1 0 0x0000e400 - 0x0000e4ff (0x100) IX[b]
[14] -1 0 0x0000e000 - 0x0000e0ff (0x100) IX[b]
[15] -1 0 0x0000dc00 - 0x0000dc0f (0x10) IX[b]
[16] -1 0 0x0000d800 - 0x0000d81f (0x20) IX[b]
[17] -1 0 0x0000d400 - 0x0000d41f (0x20) IX[b]
[18] -1 0 0x0000d000 - 0x0000d01f (0x20) IX[b]
[19] -1 0 0x0000c000 - 0x0000c0ff (0x100) IX[b](B)
(II) LoadModule: "i2c"
(II) Loading /usr/lib/xorg/modules/libi2c.so
(II) Module i2c: vendor="X.Org Foundation"
compiled for 7.1.1, module version = 1.2.0
ABI class: X.Org Video Driver, version 1.0
(II) LoadModule: "bitmap"
(II) Reloading /usr/lib/xorg/modules/fonts/libbitmap.so
(II) Loading font Bitmap
(II) LoadModule: "ddc"
(II) Loading /usr/lib/xorg/modules/libddc.so
(II) Module ddc: vendor="X.Org Foundation"
compiled for 7.1.1, module version = 1.0.0
ABI class: X.Org Video Driver, version 1.0
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions/libdri.so
(II) Module dri: vendor="X.Org Foundation"
compiled for 7.1.1, module version = 1.0.0
ABI class: X.Org Server Extension, version 0.3
(II) Loading sub module "drm"
(II) LoadModule: "drm"
(II) Loading /usr/lib/xorg/modules/linux/libdrm.so
(II) Module drm: vendor="X.Org Foundation"
compiled for 7.1.1, module version = 1.0.0
ABI class: X.Org Server Extension, version 0.3
(II) Loading extension XFree86-DRI
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
compiled for 7.1.1, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 0.3
(II) Loading extension SHAPE
(II) Loading extension MIT-SUNDRY-NONSTANDARD
(II) Loading extension BIG-REQUESTS
(II) Loading extension SYNC
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XC-MISC
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-Misc
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension TOG-CUP
(II) Loading extension Extended-Visual-Information
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "freetype"
(II) Loading /usr/lib/xorg/modules/fonts/libfreetype.so
(II) Module freetype: vendor="X.Org Foundation & the After X-TT Project"
compiled for 7.1.1, module version = 2.1.0
Module class: X.Org Font Renderer
ABI class: X.Org Font Renderer, version 0.5
(II) Loading font FreeType
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions/libglx.so
(II) Module glx: vendor="X.Org Foundation"
compiled for 7.1.1, module version = 1.0.0
ABI class: X.Org Server Extension, version 0.3
(==) AIGLX enabled
(II) Loading extension GLX
(II) LoadModule: "int10"
(II) Loading /usr/lib/xorg/modules/libint10.so
(II) Module int10: vendor="X.Org Foundation"
compiled for 7.1.1, module version = 1.0.0
ABI class: X.Org Video Driver, version 1.0
(II) LoadModule: "type1"
(II) Loading /usr/lib/xorg/modules/fonts/libtype1.so
(II) Module type1: vendor="X.Org Foundation"
compiled for 7.1.1, module version = 1.0.2
Module class: X.Org Font Renderer
ABI class: X.Org Font Renderer, version 0.5
(II) Loading font Type1
(II) LoadModule: "vbe"
(II) Loading /usr/lib/xorg/modules/libvbe.so
(II) Module vbe: vendor="X.Org Foundation"
compiled for 7.1.1, module version = 1.1.0
ABI class: X.Org Video Driver, version 1.0
(II) LoadModule: "radeon"
(II) Loading /usr/lib/xorg/modules/drivers/radeon_drv.so
(II) Module radeon: vendor="X.Org Foundation"
compiled for 7.1.1, module version = 4.2.0
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 1.0
(II) LoadModule: "ati"
(II) Loading /usr/lib/xorg/modules/drivers/ati_drv.so
(II) Module ati: vendor="X.Org Foundation"
compiled for 7.1.1, module version = 6.6.2
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 1.0
(II) LoadModule: "kbd"
(II) Loading /usr/lib/xorg/modules/input/kbd_drv.so
(II) Module kbd: vendor="X.Org Foundation"
compiled for 7.1.1, module version = 1.1.0
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 0.6
(II) LoadModule: "mouse"
(II) Loading /usr/lib/xorg/modules/input/mouse_drv.so
(II) Module mouse: vendor="X.Org Foundation"
compiled for 7.1.1, module version = 1.1.1
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 0.6
(II) ATI: ATI driver (version 6.6.2) for chipsets: ati, ativga
(II) R128: Driver for ATI Rage 128 chipsets:
ATI Rage 128 Mobility M3 LE (PCI), ATI Rage 128 Mobility M3 LF (AGP),
ATI Rage 128 Mobility M4 MF (AGP), ATI Rage 128 Mobility M4 ML (AGP),
ATI Rage 128 Pro GL PA (AGP?), ATI Rage 128 Pro GL PB (AGP?),
ATI Rage 128 Pro GL PC (AGP?), ATI Rage 128 Pro GL PD (PCI),
ATI Rage 128 Pro GL PE (AGP?), ATI Rage 128 Pro GL PF (AGP),
ATI Rage 128 Pro VR PG (AGP?), ATI Rage 128 Pro VR PH (AGP?),
ATI Rage 128 Pro VR PI (AGP?), ATI Rage 128 Pro VR PJ (AGP?),
ATI Rage 128 Pro VR PK (AGP?), ATI Rage 128 Pro VR PL (AGP?),
ATI Rage 128 Pro VR PM (AGP?), ATI Rage 128 Pro VR PN (AGP?),
ATI Rage 128 Pro VR PO (AGP?), ATI Rage 128 Pro VR PP (PCI),
ATI Rage 128 Pro VR PQ (AGP?), ATI Rage 128 Pro VR PR (PCI),
ATI Rage 128 Pro VR PS (AGP?), ATI Rage 128 Pro VR PT (AGP?),
ATI Rage 128 Pro VR PU (AGP?), ATI Rage 128 Pro VR PV (AGP?),
ATI Rage 128 Pro VR PW (AGP?), ATI Rage 128 Pro VR PX (AGP?),
ATI Rage 128 GL RE (PCI), ATI Rage 128 GL RF (AGP),
ATI Rage 128 RG (AGP), ATI Rage 128 VR RK (PCI),
ATI Rage 128 VR RL (AGP), ATI Rage 128 4X SE (AGP?),
ATI Rage 128 4X SF (AGP?), ATI Rage 128 4X SG (AGP?),
ATI Rage 128 4X SH (AGP?), ATI Rage 128 4X SK (AGP?),
ATI Rage 128 4X SL (AGP?), ATI Rage 128 4X SM (AGP),
ATI Rage 128 4X SN (AGP?), ATI Rage 128 Pro ULTRA TF (AGP),
ATI Rage 128 Pro ULTRA TL (AGP), ATI Rage 128 Pro ULTRA TR (AGP),
ATI Rage 128 Pro ULTRA TS (AGP?), ATI Rage 128 Pro ULTRA TT (AGP?),
ATI Rage 128 Pro ULTRA TU (AGP?)
(II) RADEON: Driver for ATI Radeon chipsets: ATI Radeon QD (AGP),
ATI Radeon QE (AGP), ATI Radeon QF (AGP), ATI Radeon QG (AGP),
ATI Radeon VE/7000 QY (AGP/PCI), ATI Radeon VE/7000 QZ (AGP/PCI),
ATI ES1000 515E (PCI), ATI ES1000 5969 (PCI),
ATI Radeon Mobility M7 LW (AGP),
ATI Mobility FireGL 7800 M7 LX (AGP),
ATI Radeon Mobility M6 LY (AGP), ATI Radeon Mobility M6 LZ (AGP),
ATI Radeon IGP320 (A3) 4136, ATI Radeon IGP320M (U1) 4336,
ATI Radeon IGP330/340/350 (A4) 4137,
ATI Radeon IGP330M/340M/350M (U2) 4337,
ATI Radeon 7000 IGP (A4+) 4237, ATI Radeon Mobility 7000 IGP 4437,
ATI FireGL 8700/8800 QH (AGP), ATI Radeon 8500 QL (AGP),
ATI Radeon 9100 QM (AGP), ATI Radeon 8500 AIW BB (AGP),
ATI Radeon 8500 AIW BC (AGP), ATI Radeon 7500 QW (AGP/PCI),
ATI Radeon 7500 QX (AGP/PCI), ATI Radeon 9000/PRO If (AGP/PCI),
ATI Radeon 9000 Ig (AGP/PCI), ATI FireGL Mobility 9000 (M9) Ld (AGP),
ATI Radeon Mobility 9000 (M9) Lf (AGP),
ATI Radeon Mobility 9000 (M9) Lg (AGP),
ATI Radeon 9100 IGP (A5) 5834,
ATI Radeon Mobility 9100 IGP (U3) 5835, ATI Radeon 9100 PRO IGP 7834,
ATI Radeon Mobility 9200 IGP 7835, ATI Radeon 9250 5960 (AGP),
ATI Radeon 9200 5961 (AGP), ATI Radeon 9200 5962 (AGP),
ATI Radeon 9200SE 5964 (AGP), ATI FireMV 2200 (PCI),
ATI Radeon Mobility 9200 (M9+) 5C61 (AGP),
ATI Radeon Mobility 9200 (M9+) 5C63 (AGP), ATI Radeon 9500 AD (AGP),
ATI Radeon 9500 AE (AGP), ATI Radeon 9600TX AF (AGP),
ATI FireGL Z1 AG (AGP), ATI Radeon 9700 Pro ND (AGP),
ATI Radeon 9700/9500Pro NE (AGP), ATI Radeon 9600TX NF (AGP),
ATI FireGL X1 NG (AGP), ATI Radeon 9600 AP (AGP),
ATI Radeon 9600SE AQ (AGP), ATI Radeon 9600XT AR (AGP),
ATI Radeon 9600 AS (AGP), ATI FireGL T2 AT (AGP),
ATI FireGL RV360 AV (AGP),
ATI Radeon Mobility 9600/9700 (M10/M11) NP (AGP),
ATI Radeon Mobility 9600 (M10) NQ (AGP),
ATI Radeon Mobility 9600 (M11) NR (AGP),
ATI Radeon Mobility 9600 (M10) NS (AGP),
ATI FireGL Mobility T2 (M10) NT (AGP),
ATI FireGL Mobility T2e (M11) NV (AGP), ATI Radeon 9650,
ATI Radeon 9800SE AH (AGP), ATI Radeon 9800 AI (AGP),
ATI Radeon 9800 AJ (AGP), ATI FireGL X2 AK (AGP),
ATI Radeon 9800PRO NH (AGP), ATI Radeon 9800 NI (AGP),
ATI FireGL X2 NK (AGP), ATI Radeon 9800XT NJ (AGP),
ATI Radeon X600 (RV380) 3E50 (PCIE),
ATI FireGL V3200 (RV380) 3E54 (PCIE),
ATI Radeon Mobility X600 (M24) 3150 (PCIE),
ATI Radeon Mobility X300 (M24) 3152 (PCIE),
ATI FireGL M24 GL 3154 (PCIE), ATI Radeon X300 (RV370) 5B60 (PCIE),
ATI Radeon X600 (RV370) 5B62 (PCIE),
ATI Radeon X550 (RV370) 5B63 (PCIE),
ATI FireGL V3100 (RV370) 5B64 (PCIE),
ATI FireMV 2200 PCIE (RV370) 5B65 (PCIE),
ATI Radeon Mobility X300 (M22) 5460 (PCIE),
ATI Radeon Mobility X600 SE (M24C) 5462 (PCIE),
ATI FireGL M22 GL 5464 (PCIE), ATI Radeon XPRESS 200 5A41 (PCIE),
ATI Radeon XPRESS 200M 5A42 (PCIE),
ATI Radeon XPRESS 200 5A61 (PCIE),
ATI Radeon XPRESS 200M 5A62 (PCIE),
ATI Radeon XPRESS 200 5954 (PCIE),
ATI Radeon XPRESS 200M 5955 (PCIE),
ATI Radeon XPRESS 200 5974 (PCIE),
ATI Radeon XPRESS 200M 5975 (PCIE), ATI FireGL V5000 (RV410) (PCIE),
ATI Mobility FireGL V5000 (M26) (PCIE),
ATI Mobility FireGL V5000 (M26) (PCIE),
ATI Mobility Radeon X700 XL (M26) (PCIE),
ATI Mobility Radeon X700 (M26) (PCIE),
ATI Mobility Radeon X700 (M26) (PCIE),
ATI Radeon X700 PRO (RV410) (PCIE),
ATI Radeon X700 XT (RV410) (PCIE), ATI Radeon X700 (RV410) (PCIE),
ATI Radeon X700 SE (RV410) (PCIE), ATI Radeon X700 SE (RV410) (PCIE),
ATI Radeon X800 (R420) JH (AGP), ATI Radeon X800PRO (R420) JI (AGP),
ATI Radeon X800SE (R420) JJ (AGP), ATI Radeon X800 (R420) JK (AGP),
ATI Radeon X800 (R420) JL (AGP), ATI FireGL X3 (R420) JM (AGP),
ATI Radeon Mobility 9800 (M18) JN (AGP),
ATI Radeon X800XT (R420) JP (AGP), ATI Radeon X800 SE (R420) (AGP),
ATI Radeon AIW X800 VE (R420) JT (AGP),
ATI Radeon X800 (R423) UH (PCIE),
ATI Radeon X800PRO (R423) UI (PCIE),
ATI Radeon X800LE (R423) UJ (PCIE),
ATI Radeon X800SE (R423) UK (PCIE),
ATI FireGL V5100 (R423) UQ (PCIE),
ATI FireGL unknown (R423) UR (PCIE),
ATI FireGL unknown (R423) UT (PCIE),
ATI Radeon X800XT (R423) 5D57 (PCIE), ATI FireGL V7100 (R423) (PCIE),
ATI Mobility FireGL V5100 (M28) (PCIE),
ATI Mobility Radeon X800 (M28) (PCIE),
ATI Mobility Radeon X800 XT (M28) (PCIE),
ATI Radeon X800 (R430) (PCIE), ATI Radeon X800 XL (R430) (PCIE),
ATI Radeon X800 SE (R430) (PCIE), ATI Radeon X800 XTP (R430) (PCIE),
ATI Radeon X850 5D4C (PCIE),
ATI unknown Radeon / FireGL (R480) 5D50 (PCIE),
ATI Radeon X850 SE (R480) (PCIE), ATI Radeon X850 PRO (R480) (PCIE),
ATI Radeon X850 XT (R480) (PCIE),
ATI Radeon X850 XT PE (R480) (PCIE),
ATI Radeon X850 PRO (R480) (AGP), ATI Radeon X850 SE (R480) (AGP),
ATI Radeon X850 XT (R480) (AGP), ATI Radeon X850 XT PE (R480) (AGP)
(II) Primary Device is: PCI 01:00:0
(WW) RADEON: No matching Device section for instance (BusID PCI:1:0:1) found
(--) Chipset ATI Radeon 9600 AP (AGP) found
(II) resource ranges after xf86ClaimFixedResources() call:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0xeb000000 - 0xeb0003ff (0x400) MX[b]
[5] -1 0 0xeb001000 - 0xeb0010ff (0x100) MX[b]
[6] -1 0 0xe0000000 - 0xdfffffff (0x0) MX[b]O
[7] -1 0 0xe9000000 - 0xe900ffff (0x10000) MX[b](B)
[8] -1 0 0xc0000000 - 0xcfffffff (0x10000000) MX[b](B)
[9] -1 0 0xe9010000 - 0xe901ffff (0x10000) MX[b](B)
[10] -1 0 0xd0000000 - 0xdfffffff (0x10000000) MX[b](B)
[11] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[12] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
[13] -1 0 0x0000e400 - 0x0000e4ff (0x100) IX[b]
[14] -1 0 0x0000e000 - 0x0000e0ff (0x100) IX[b]
[15] -1 0 0x0000dc00 - 0x0000dc0f (0x10) IX[b]
[16] -1 0 0x0000d800 - 0x0000d81f (0x20) IX[b]
[17] -1 0 0x0000d400 - 0x0000d41f (0x20) IX[b]
[18] -1 0 0x0000d000 - 0x0000d01f (0x20) IX[b]
[19] -1 0 0x0000c000 - 0x0000c0ff (0x100) IX[b](B)
(II) Loading sub module "radeon"
(II) LoadModule: "radeon"
(II) Reloading /usr/lib/xorg/modules/drivers/radeon_drv.so
(II) resource ranges after probing:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0xeb000000 - 0xeb0003ff (0x400) MX[b]
[5] -1 0 0xeb001000 - 0xeb0010ff (0x100) MX[b]
[6] -1 0 0xe0000000 - 0xdfffffff (0x0) MX[b]O
[7] -1 0 0xe9000000 - 0xe900ffff (0x10000) MX[b](B)
[8] -1 0 0xc0000000 - 0xcfffffff (0x10000000) MX[b](B)
[9] -1 0 0xe9010000 - 0xe901ffff (0x10000) MX[b](B)
[10] -1 0 0xd0000000 - 0xdfffffff (0x10000000) MX[b](B)
[11] 0 0 0x000a0000 - 0x000affff (0x10000) MS[b]
[12] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[b]
[13] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[b]
[14] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[15] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
[16] -1 0 0x0000e400 - 0x0000e4ff (0x100) IX[b]
[17] -1 0 0x0000e000 - 0x0000e0ff (0x100) IX[b]
[18] -1 0 0x0000dc00 - 0x0000dc0f (0x10) IX[b]
[19] -1 0 0x0000d800 - 0x0000d81f (0x20) IX[b]
[20] -1 0 0x0000d400 - 0x0000d41f (0x20) IX[b]
[21] -1 0 0x0000d000 - 0x0000d01f (0x20) IX[b]
[22] -1 0 0x0000c000 - 0x0000c0ff (0x100) IX[b](B)
[23] 0 0 0x000003b0 - 0x000003bb (0xc) IS[b]
[24] 0 0 0x000003c0 - 0x000003df (0x20) IS[b]
(II) Setting vga for screen 0.
(**) RADEON(0): RADEONPreInit
(II) RADEON(0): MMIO registers at 0xe9000000: size 64KB
(II) RADEON(0): PCI bus 1 card 0 func 0
(**) RADEON(0): Depth 24, (--) framebuffer bpp 32
(II) RADEON(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
(==) RADEON(0): Default visual is TrueColor
(**) RADEON(0): Option "AGPMode" "4"
(**) RADEON(0): Option "AGPSize" "128"
(**) RADEON(0): Option "GARTSize" "64"
(**) RADEON(0): Option "RingSize" "8"
(**) RADEON(0): Option "BufferSize" "2"
(**) RADEON(0): Option "EnableDepthMoves" "yes"
(**) RADEON(0): Option "EnablePageFlip" "1"
(**) RADEON(0): Option "AccelDFS" "0"
(**) RADEON(0): Option "UseFBDev" "false"
(**) RADEON(0): Option "ColorTiling" "1"
(**) RADEON(0): Option "RenderAccel" "true"
(**) RADEON(0): Option "SubPixelOrder" "none"
(**) RADEON(0): Option "DynamicClocks" "on"
(**) RADEON(0): Option "AccelMethod" "XAA"
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/lib/xorg/modules/libvgahw.so
(II) Module vgahw: vendor="X.Org Foundation"
compiled for 7.1.1, module version = 0.1.0
ABI class: X.Org Video Driver, version 1.0
(II) RADEON(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000
(==) RADEON(0): RGB weight 888
(II) RADEON(0): Using 8 bits per RGB (8 bit DAC)
(==) RADEON(0): X server will not keep DPI constant for all screen sizes
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Reloading /usr/lib/xorg/modules/libint10.so
(II) RADEON(0): initializing int10
(II) RADEON(0): Primary V_BIOS segment is: 0xc000
(**) RADEON(0): Option "mtrr" "on"
(--) RADEON(0): Chipset: "ATI Radeon 9600 AP (AGP)" (ChipID = 0x4150)
(--) RADEON(0): Linear framebuffer at 0xc0000000
(II) RADEON(0): AGP card detected
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is -1, (No such device or address)
drmOpenDevice: open result is -1, (No such device or address)
drmOpenDevice: Open failed
drmOpenByBusid: Searching for BusID pci:0000:01:00.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 8, (OK)
drmOpenByBusid: drmOpenMinor returns 8
drmOpenByBusid: drmGetBusid reports pci:0000:01:00.0
(II) RADEON(0): [dri] Found DRI library version 1.2.0 and kernel module version 1.25.0
(**) RADEON(0): AGP 4x mode is configured
(II) RADEON(0): AGP Fast Write disabled by default
(II) Loading sub module "shadowfb"
(II) LoadModule: "shadowfb"
(II) Loading /usr/lib/xorg/modules/libshadowfb.so
(II) Module shadowfb: vendor="X.Org Foundation"
compiled for 7.1.1, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.3
(II) RADEON(0): Page flipping enabled
(II) RADEON(0): Will try to use DMA for Xv image transfers
(II) RADEON(0): Generation 2 PCI interface, using max accessible memory
(II) RADEON(0): Detected total video RAM=131072K, accessible=262144K (PCI BAR=262144K)
(--) RADEON(0): Mapped VideoRAM: 131072 kByte (128 bit DDR SDRAM)
(II) RADEON(0): Color tiling enabled by default
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Reloading /usr/lib/xorg/modules/libddc.so
(II) Loading sub module "i2c"
(II) LoadModule: "i2c"
(II) Reloading /usr/lib/xorg/modules/libi2c.so
(II) RADEON(0): I2C bus "DDC" initialized.
(II) RADEON(0): Legacy BIOS detected
(II) RADEON(0): Connector0: DDCType-2, DACType-1, TMDSType-0, ConnectorType-3
(II) RADEON(0): Connector1: DDCType-3, DACType-0, TMDSType--1, ConnectorType-2
(II) RADEON(0): I2C device "DDC:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "DDC:ddc2" removed.
(II) RADEON(0): DDC Type: 2, Detected Type: 1
(II) RADEON(0): I2C device "DDC:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "DDC:ddc2" removed.
(II) RADEON(0): I2C device "DDC:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "DDC:ddc2" removed.
(II) RADEON(0): I2C device "DDC:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "DDC:ddc2" removed.
(II) RADEON(0): DDC Type: 3, Detected Type: 0
(II) RADEON(0): EDID data from the display on port 1 ----------------------
(II) RADEON(0): Manufacturer: PHL Model: c005 Serial#: 9712
(II) RADEON(0): Year: 2003 Week: 35
(II) RADEON(0): EDID Version: 1.3
(II) RADEON(0): Analog Display Input, Input Voltage Level: 0.700/0.300 V
(II) RADEON(0): Signal levels configurable
(II) RADEON(0): Sync: Separate Composite SyncOnGreenSerration on. V.Sync Pulse req. if CompSync or SyncOnGreen
(II) RADEON(0): Max H-Image Size [cm]: horiz.: 34 vert.: 27
(II) RADEON(0): Gamma: 2.20
(II) RADEON(0): DPMS capabilities: StandBy Suspend Off; RGB/Color Display
(II) RADEON(0): Default color space is primary color space
(II) RADEON(0): First detailed timing is preferred mode
(II) RADEON(0): redX: 0.633 redY: 0.336 greenX: 0.300 greenY: 0.586
(II) RADEON(0): blueX: 0.146 blueY: 0.103 whiteX: 0.313 whiteY: 0.329
(II) RADEON(0): Supported VESA Video Modes:
(II) RADEON(0): 720x400@70Hz
(II) RADEON(0): 640x480@60Hz
(II) RADEON(0): 640x480@67Hz
(II) RADEON(0): 640x480@72Hz
(II) RADEON(0): 640x480@75Hz
(II) RADEON(0): 800x600@56Hz
(II) RADEON(0): 800x600@60Hz
(II) RADEON(0): 800x600@72Hz
(II) RADEON(0): 800x600@75Hz
(II) RADEON(0): 832x624@75Hz
(II) RADEON(0): 1024x768@60Hz
(II) RADEON(0): 1024x768@70Hz
(II) RADEON(0): 1024x768@75Hz
(II) RADEON(0): 1280x1024@75Hz
(II) RADEON(0): 1152x870@75Hz
(II) RADEON(0): Manufacturer's mask: 0
(II) RADEON(0): Supported Future Video Modes:
(II) RADEON(0): #0: hsize: 1152 vsize 864 refresh: 70 vid: 19057
(II) RADEON(0): #1: hsize: 1152 vsize 864 refresh: 75 vid: 20337
(II) RADEON(0): #2: hsize: 1280 vsize 960 refresh: 60 vid: 16513
(II) RADEON(0): #3: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
(II) RADEON(0): Supported additional Video Mode:
(II) RADEON(0): clock: 108.0 MHz Image Size: 338 x 270 mm
(II) RADEON(0): h_active: 1280 h_sync: 1328 h_sync_end 1440 h_blank_end 1688 h_border: 0
(II) RADEON(0): v_active: 1024 v_sync: 1025 v_sync_end 1028 v_blanking: 1066 v_border: 0
(II) RADEON(0): Serial No: HD 009712
(II) RADEON(0): Monitor name: Philips 170C4
(II) RADEON(0): Ranges: V min: 56 V max: 76 Hz, H min: 30 H max: 82 kHz, PixClock max 140 MHz
(II) RADEON(0):
(II) RADEON(0): Primary:
Monitor -- CRT
Connector -- DVI-I
DAC Type -- TVDAC/ExtDAC
TMDS Type -- Internal
DDC Type -- DVI_DDC
(II) RADEON(0): Secondary:
Monitor -- NONE
Connector -- VGA
DAC Type -- Primary
TMDS Type -- NONE
DDC Type -- VGA_DDC
(II) RADEON(0): PLL parameters: rf=2700 rd=12 min=20000 max=40000; xclk=29700
(WW) RADEON(0): Failed to detect secondary monitor, MergedFB/Clone mode disabled
(==) RADEON(0): Using gamma correction (1.0, 1.0, 1.0)
(II) RADEON(0): Validating modes on Primary head ---------
(II) RADEON(0): Philips 170C: Using hsync range of 30.00-82.00 kHz
(II) RADEON(0): Philips 170C: Using vrefresh range of 56.00-76.00 Hz
(II) RADEON(0): Clock range: 20.00 to 400.00 MHz
(II) RADEON(0): Not using default mode "640x350" (vrefresh out of range)
(II) RADEON(0): Not using default mode "320x175" (bad mode clock/interlace/doublescan)
(II) RADEON(0): Not using default mode "640x400" (vrefresh out of range)
(II) RADEON(0): Not using default mode "320x200" (bad mode clock/interlace/doublescan)
(II) RADEON(0): Not using default mode "720x400" (vrefresh out of range)
(II) RADEON(0): Not using default mode "360x200" (bad mode clock/interlace/doublescan)
(II) RADEON(0): Not using default mode "320x240" (bad mode clock/interlace/doublescan)
(II) RADEON(0): Not using default mode "320x240" (bad mode clock/interlace/doublescan)
(II) RADEON(0): Not using default mode "320x240" (bad mode clock/interlace/doublescan)
(II) RADEON(0): Not using default mode "640x480" (vrefresh out of range)
(II) RADEON(0): Not using default mode "320x240" (bad mode clock/interlace/doublescan)
(II) RADEON(0): Not using default mode "400x300" (bad mode clock/interlace/doublescan)
(II) RADEON(0): Not using default mode "800x600" (vrefresh out of range)
(II) RADEON(0): Not using default mode "400x300" (vrefresh out of range)
(II) RADEON(0): Not using default mode "1024x768" (vrefresh out of range)
(II) RADEON(0): Not using default mode "512x384" (vrefresh out of range)
(II) RADEON(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan)
(II) RADEON(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan)
(II) RADEON(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan)
(II) RADEON(0): Not using default mode "1024x768" (vrefresh out of range)
(II) RADEON(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan)
(II) RADEON(0): Not using default mode "576x432" (bad mode clock/interlace/doublescan)
(II) RADEON(0): Not using default mode "640x480" (bad mode clock/interlace/doublescan)
(WW) (1280x960,Philips 170C) mode clock 148.5MHz exceeds DDC maximum 140MHz
(II) RADEON(0): Not using default mode "1280x960" (hsync out of range)
(II) RADEON(0): Not using default mode "640x480" (bad mode clock/interlace/doublescan)
(II) RADEON(0): Not using default mode "640x512" (bad mode clock/interlace/doublescan)
(II) RADEON(0): Not using default mode "640x512" (bad mode clock/interlace/doublescan)
(WW) (1280x1024,Philips 170C) mode clock 157.5MHz exceeds DDC maximum 140MHz
(II) RADEON(0): Not using default mode "1280x1024" (hsync out of range)
(II) RADEON(0): Not using default mode "640x512" (bad mode clock/interlace/doublescan)
(WW) (1600x1200,Philips 170C) mode clock 162MHz exceeds DDC maximum 140MHz
(II) RADEON(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan)
(WW) (1600x1200,Philips 170C) mode clock 175.5MHz exceeds DDC maximum 140MHz
(II) RADEON(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan)
(WW) (1600x1200,Philips 170C) mode clock 189MHz exceeds DDC maximum 140MHz
(II) RADEON(0): Not using default mode "1600x1200" (hsync out of range)
(II) RADEON(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan)
(WW) (1600x1200,Philips 170C) mode clock 202.5MHz exceeds DDC maximum 140MHz
(II) RADEON(0): Not using default mode "1600x1200" (hsync out of range)
(II) RADEON(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan)
(WW) (1600x1200,Philips 170C) mode clock 229.5MHz exceeds DDC maximum 140MHz
(II) RADEON(0): Not using default mode "1600x1200" (hsync out of range)
(II) RADEON(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan)
(WW) (1792x1344,Philips 170C) mode clock 204.8MHz exceeds DDC maximum 140MHz
(II) RADEON(0): Not using default mode "1792x1344" (hsync out of range)
(II) RADEON(0): Not using default mode "896x672" (bad mode clock/interlace/doublescan)
(WW) (1792x1344,Philips 170C) mode clock 261MHz exceeds DDC maximum 140MHz
(II) RADEON(0): Not using default mode "1792x1344" (hsync out of range)
(II) RADEON(0): Not using default mode "896x672" (bad mode clock/interlace/doublescan)
(WW) (1856x1392,Philips 170C) mode clock 218.3MHz exceeds DDC maximum 140MHz
(II) RADEON(0): Not using default mode "1856x1392" (hsync out of range)
(II) RADEON(0): Not using default mode "928x696" (bad mode clock/interlace/doublescan)
(WW) (1856x1392,Philips 170C) mode clock 288MHz exceeds DDC maximum 140MHz
(II) RADEON(0): Not using default mode "1856x1392" (hsync out of range)
(II) RADEON(0): Not using default mode "928x696" (bad mode clock/interlace/doublescan)
(WW) (1920x1440,Philips 170C) mode clock 234MHz exceeds DDC maximum 140MHz
(II) RADEON(0): Not using default mode "1920x1440" (hsync out of range)
(II) RADEON(0): Not using default mode "960x720" (bad mode clock/interlace/doublescan)
(WW) (1920x1440,Philips 170C) mode clock 297MHz exceeds DDC maximum 140MHz
(II) RADEON(0): Not using default mode "1920x1440" (hsync out of range)
(II) RADEON(0): Not using default mode "960x720" (bad mode clock/interlace/doublescan)
(II) RADEON(0): Not using default mode "640x384" (bad mode clock/interlace/doublescan)
(II) RADEON(0): Not using default mode "640x400" (bad mode clock/interlace/doublescan)
(II) RADEON(0): Not using default mode "1152x768" (vrefresh out of range)
(II) RADEON(0): Not using default mode "576x384" (bad mode clock/interlace/doublescan)
(II) RADEON(0): Not using default mode "1152x864" (vrefresh out of range)
(II) RADEON(0): Not using default mode "576x432" (bad mode clock/interlace/doublescan)
(II) RADEON(0): Not using default mode "700x525" (bad mode clock/interlace/doublescan)
(WW) (1400x1050,Philips 170C) mode clock 151MHz exceeds DDC maximum 140MHz
(II) RADEON(0): Not using default mode "700x525" (bad mode clock/interlace/doublescan)
(WW) (1400x1050,Philips 170C) mode clock 155.8MHz exceeds DDC maximum 140MHz
(II) RADEON(0): Not using default mode "700x525" (bad mode clock/interlace/doublescan)
(WW) (1400x1050,Philips 170C) mode clock 184MHz exceeds DDC maximum 140MHz
(II) RADEON(0): Not using default mode "1400x1050" (hsync out of range)
(II) RADEON(0): Not using default mode "700x525" (bad mode clock/interlace/doublescan)
(II) RADEON(0): Not using default mode "720x450" (bad mode clock/interlace/doublescan)
(II) RADEON(0): Not using default mode "800x512" (bad mode clock/interlace/doublescan)
(WW) (1680x1050,Philips 170C) mode clock 147.14MHz exceeds DDC maximum 140MHz
(II) RADEON(0): Not using default mode "840x525" (bad mode clock/interlace/doublescan)
(WW) (1920x1200,Philips 170C) mode clock 193.16MHz exceeds DDC maximum 140MHz
(II) RADEON(0): Not using default mode "960x600" (bad mode clock/interlace/doublescan)
(WW) (1920x1200,Philips 170C) mode clock 230MHz exceeds DDC maximum 140MHz
(II) RADEON(0): Not using default mode "1920x1200" (hsync out of range)
(II) RADEON(0): Not using default mode "960x600" (bad mode clock/interlace/doublescan)
(WW) (1920x1440,Philips 170C) mode clock 341.35MHz exceeds DDC maximum 140MHz
(II) RADEON(0): Not using default mode "1920x1440" (hsync out of range)
(II) RADEON(0): Not using default mode "960x720" (bad mode clock/interlace/doublescan)
(WW) (2048x1536,Philips 170C) mode clock 266.95MHz exceeds DDC maximum 140MHz
(II) RADEON(0): Not using default mode "2048x1536" (hsync out of range)
(II) RADEON(0): Not using default mode "1024x768" (bad mode clock/interlace/doublescan)
(WW) (2048x1536,Philips 170C) mode clock 340.48MHz exceeds DDC maximum 140MHz
(II) RADEON(0): Not using default mode "2048x1536" (hsync out of range)
(II) RADEON(0): Not using default mode "1024x768" (bad mode clock/interlace/doublescan)
(WW) (2048x1536,Philips 170C) mode clock 388.04MHz exceeds DDC maximum 140MHz
(II) RADEON(0): Not using default mode "2048x1536" (hsync out of range)
(II) RADEON(0): Not using default mode "1024x768" (bad mode clock/interlace/doublescan)
(II) RADEON(0): Not using mode "720x400" (no mode of this name)
(II) RADEON(0): Not using default mode "1920x1200" (width too large for virtual size)
(II) RADEON(0): Not using default mode "1600x1200" (width too large for virtual size)
(II) RADEON(0): Not using default mode "1600x1200" (width too large for virtual size)
(II) RADEON(0): Not using default mode "1680x1050" (width too large for virtual size)
(II) RADEON(0): Not using default mode "1400x1050" (width too large for virtual size)
(II) RADEON(0): Not using default mode "1400x1050" (width too large for virtual size)
(II) RADEON(0): Not using default mode "1400x1050" (width too large for virtual size)
(II) RADEON(0): Not using default mode "1440x900" (width too large for virtual size)
(--) RADEON(0): Virtual size is 1280x1024 (pitch 1280)
(**) RADEON(0): *Default mode "1280x1024": 135.0 MHz, 80.0 kHz, 75.0 Hz
(II) RADEON(0): Modeline "1280x1024" 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync
(**) RADEON(0): *Default mode "1280x960": 108.0 MHz, 60.0 kHz, 60.0 Hz
(II) RADEON(0): Modeline "1280x960" 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync
(**) RADEON(0): *Default mode "1152x864": 108.0 MHz, 67.5 kHz, 75.0 Hz
(II) RADEON(0): Modeline "1152x864" 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync
(**) RADEON(0): *Default mode "1024x768": 78.8 MHz, 60.1 kHz, 75.1 Hz
(II) RADEON(0): Modeline "1024x768" 78.80 1024 1040 1136 1312 768 769 772 800 +hsync +vsync
(**) RADEON(0): *Default mode "832x624": 57.3 MHz, 49.7 kHz, 74.6 Hz
(II) RADEON(0): Modeline "832x624" 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync
(**) RADEON(0): *Default mode "800x600": 49.5 MHz, 46.9 kHz, 75.0 Hz
(II) RADEON(0): Modeline "800x600" 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync
(**) RADEON(0): *Default mode "640x480": 31.5 MHz, 37.5 kHz, 75.0 Hz
(II) RADEON(0): Modeline "640x480" 31.50 640 656 720 840 480 481 484 500 -hsync -vsync
(**) RADEON(0): Default mode "1280x1024": 108.0 MHz, 64.0 kHz, 60.0 Hz
(II) RADEON(0): Modeline "1280x1024" 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync
(**) RADEON(0): Default mode "1280x800": 83.5 MHz, 49.7 kHz, 60.0 Hz
(II) RADEON(0): Modeline "1280x800" 83.46 1280 1344 1480 1680 800 801 804 828
(**) RADEON(0): Default mode "1280x768": 80.1 MHz, 47.7 kHz, 60.0 Hz
(II) RADEON(0): Modeline "1280x768" 80.14 1280 1344 1480 1680 768 769 772 795
(**) RADEON(0): Default mode "1024x768": 75.0 MHz, 56.5 kHz, 70.1 Hz
(II) RADEON(0): Modeline "1024x768" 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync
(**) RADEON(0): Default mode "1024x768": 65.0 MHz, 48.4 kHz, 60.0 Hz
(II) RADEON(0): Modeline "1024x768" 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync
(**) RADEON(0): Default mode "800x600": 50.0 MHz, 48.1 kHz, 72.2 Hz
(II) RADEON(0): Modeline "800x600" 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync
(**) RADEON(0): Default mode "800x600": 40.0 MHz, 37.9 kHz, 60.3 Hz
(II) RADEON(0): Modeline "800x600" 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync
(**) RADEON(0): Default mode "800x600": 36.0 MHz, 35.2 kHz, 56.2 Hz
(II) RADEON(0): Modeline "800x600" 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync
(**) RADEON(0): Default mode "640x480": 31.5 MHz, 37.9 kHz, 72.8 Hz
(II) RADEON(0): Modeline "640x480" 31.50 640 664 704 832 480 489 491 520 -hsync -vsync
(**) RADEON(0): Default mode "640x480": 25.2 MHz, 31.5 kHz, 60.0 Hz
(II) RADEON(0): Modeline "640x480" 25.20 640 656 752 800 480 490 492 525 -hsync -vsync
(**) RADEON(0): Default mode "416x312": 28.6 MHz, 49.7 kHz, 74.7 Hz (D)
(II) RADEON(0): Modeline "416x312" 28.64 416 432 464 576 312 312 314 333 doublescan -hsync -vsync
(**) RADEON(0): Default mode "400x300": 24.8 MHz, 46.9 kHz, 75.1 Hz (D)
(II) RADEON(0): Modeline "400x300" 24.75 400 408 448 528 300 300 302 312 doublescan +hsync +vsync
(**) RADEON(0): Default mode "400x300": 25.0 MHz, 48.1 kHz, 72.2 Hz (D)
(II) RADEON(0): Modeline "400x300" 25.00 400 428 488 520 300 318 321 333 doublescan +hsync +vsync
(**) RADEON(0): Default mode "400x300": 20.0 MHz, 37.9 kHz, 60.3 Hz (D)
(II) RADEON(0): Modeline "400x300" 20.00 400 420 484 528 300 300 302 314 doublescan +hsync +vsync
(--) RADEON(0): Display dimensions: (340, 270) mm
(--) RADEON(0): DPI set to (95, 96)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules/libfb.so
(II) Module fb: vendor="X.Org Foundation"
compiled for 7.1.1, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.3
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Loading /usr/lib/xorg/modules/libramdac.so
(II) Module ramdac: vendor="X.Org Foundation"
compiled for 7.1.1, module version = 0.1.0
ABI class: X.Org Video Driver, version 1.0
(**) RADEON(0): Using XAA acceleration architecture
(II) Loading sub module "xaa"
(II) LoadModule: "xaa"
(II) Loading /usr/lib/xorg/modules/libxaa.so
(II) Module xaa: vendor="X.Org Foundation"
compiled for 7.1.1, module version = 1.2.0
ABI class: X.Org Video Driver, version 1.0
(II) RADEON(0): No MM_TABLE found - assuming CARD is not TV-in capable.
(!!) RADEON(0): For information on using the multimedia capabilities
of this adapter, please see http://gatos.sf.net.
(--) Depth 24 pixmap format is 32 bpp
(II) do I need RAC? No, I don't.
(II) resource ranges after preInit:
[0] 0 0 0xe9000000 - 0xe900ffff (0x10000) MX[b]
[1] 0 0 0xc0000000 - 0xcfffffff (0x10000000) MX[b]
[2] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
[3] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[4] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[5] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[6] -1 0 0xeb000000 - 0xeb0003ff (0x400) MX[b]
[7] -1 0 0xeb001000 - 0xeb0010ff (0x100) MX[b]
[8] -1 0 0xe0000000 - 0xdfffffff (0x0) MX[b]O
[9] -1 0 0xe9000000 - 0xe900ffff (0x10000) MX[b](B)
[10] -1 0 0xc0000000 - 0xcfffffff (0x10000000) MX[b](B)
[11] -1 0 0xe9010000 - 0xe901ffff (0x10000) MX[b](B)
[12] -1 0 0xd0000000 - 0xdfffffff (0x10000000) MX[b](B)
[13] 0 0 0x000a0000 - 0x000affff (0x10000) MS[b](OprU)
[14] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[b](OprU)
[15] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[b](OprU)
[16] 0 0 0x0000c000 - 0x0000c0ff (0x100) IX[b]
[17] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[18] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
[19] -1 0 0x0000e400 - 0x0000e4ff (0x100) IX[b]
[20] -1 0 0x0000e000 - 0x0000e0ff (0x100) IX[b]
[21] -1 0 0x0000dc00 - 0x0000dc0f (0x10) IX[b]
[22] -1 0 0x0000d800 - 0x0000d81f (0x20) IX[b]
[23] -1 0 0x0000d400 - 0x0000d41f (0x20) IX[b]
[24] -1 0 0x0000d000 - 0x0000d01f (0x20) IX[b]
[25] -1 0 0x0000c000 - 0x0000c0ff (0x100) IX[b](B)
[26] 0 0 0x000003b0 - 0x000003bb (0xc) IS[b](OprU)
[27] 0 0 0x000003c0 - 0x000003df (0x20) IS[b](OprU)
(**) RADEON(0): RADEONScreenInit c0000000 0
(**) RADEON(0): Map: 0xc0000000, 0x08000000
(**) RADEON(0): Write-combining range (0xc0000000,0x8000000)
(**) RADEON(0): RADEONSave
(**) RADEON(0): RADEONSaveMode(0x81fd058)
(**) RADEON(0): Read: 0x0030000c 0x00030065 0x00000000
(**) RADEON(0): Read: rd=12, fd=101, pd=3
(**) RADEON(0): RADEONSaveMode returns 0x81fd058
(==) RADEON(0): Using 24 bit depth buffer
(WW) RADEON(0): Enabling DRM support
*** Direct rendering support is highly experimental for Radeon 9500
*** and newer cards. The 3d mesa driver is not provided in this tree.
*** A very experimental (and incomplete) version is available from Mesa CVS.
*** Additional information can be found on http://r300.sourceforge.net
*** This message has been last modified on 2005-08-07.
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 8, (OK)
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 8, (OK)
drmOpenByBusid: Searching for BusID pci:0000:01:00.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 8, (OK)
drmOpenByBusid: drmOpenMinor returns 8
drmOpenByBusid: drmGetBusid reports pci:0000:01:00.0
(II) RADEON(0): [drm] DRM interface version 1.2
(II) RADEON(0): [drm] created "radeon" driver at busid "pci:0000:01:00.0"
(II) RADEON(0): [drm] added 8192 byte SAREA at 0xe0bab000
(II) RADEON(0): [drm] mapped SAREA 0xe0bab000 to 0xb7bb0000
(II) RADEON(0): [drm] framebuffer handle = 0xc0000000
(II) RADEON(0): [drm] added 1 reserved context for kernel
(II) RADEON(0): [agp] Mode 0x1f000a09 [AGP 0x1106/0x3189; Card 0x1002/0x4150]
(II) RADEON(0): [agp] 65536 kB allocated with handle 0x00000001
(II) RADEON(0): [agp] ring handle = 0xe0000000
(II) RADEON(0): [agp] Ring mapped at 0xaf27b000
(II) RADEON(0): [agp] ring read ptr handle = 0xe0801000
(II) RADEON(0): [agp] Ring read ptr mapped at 0xaf27a000
(II) RADEON(0): [agp] vertex/indirect buffers handle = 0xe0802000
(II) RADEON(0): [agp] Vertex/indirect buffers mapped at 0xaf07a000
(II) RADEON(0): [agp] GART texture map handle = 0xe0a02000
(II) RADEON(0): [agp] GART Texture map mapped at 0xabb7a000
(II) RADEON(0): [drm] register handle = 0xe9000000
(II) RADEON(0): [dri] Visual configs initialized
(**) RADEON(0): DRI New memory map param
(**) RADEON(0): RADEONInitMemoryMap() :
(**) RADEON(0): mem_size : 0x08000000
(**) RADEON(0): MC_FB_LOCATION : 0xc7ffc000
(**) RADEON(0): MC_AGP_LOCATION : 0xffffffc0
(**) RADEON(0): RADEONModeInit()
1280x1024 135.00 1280 1296 1440 1688 1024 1025 1028 1066 (24,32) +H +V
1280x1024 135.00 1280 1296 1440 1688 1024 1025 1028 1066 (24,32) +H +V
(**) RADEON(0): Pitch = 10485920 bytes (virtualX = 1280, displayWidth = 1280)
(**) RADEON(0): dc=13500, of=27000, fd=120, pd=2
(**) RADEON(0): RADEONInit returns 0x81fda08
(**) RADEON(0): RADEONRestoreMode()
(**) RADEON(0): RADEONRestoreMode(0x81fda08)
(**) RADEON(0): RADEONRestoreMemMapRegisters() :
(**) RADEON(0): MC_FB_LOCATION : 0xc7ffc000
(**) RADEON(0): MC_AGP_LOCATION : 0xffffffc0
(**) RADEON(0): Map Changed ! Applying ...
(**) RADEON(0): Map applied, resetting engine ...
(**) RADEON(0): Updating display base addresses...
(**) RADEON(0): Memory map updated.
(**) RADEON(0): Programming CRTC1, offset: 0x00000000
(**) RADEON(0): Wrote: 0x0000000c 0x00010078 0x00000000 (0x0000a700)
(**) RADEON(0): Wrote: rd=12, fd=120, pd=1
(**) RADEON(0): GRPH_BUFFER_CNTL from 30004c4c to 20287c7c
(**) RADEON(0): RADEONSaveScreen(0)
(**) RADEON(0): Enabling depth moves
(**) RADEON(0): Setting up initial surfaces
(**) RADEON(0): Initializing fb layer
(**) RADEON(0): Setting up accel memmap
(II) RADEON(0): CP in BM mode
(II) RADEON(0): Using 64 MB GART aperture
(II) RADEON(0): Using 8 MB for the ring buffer
(II) RADEON(0): Using 2 MB for vertex/indirect buffers
(II) RADEON(0): Using 54 MB for GART textures
(II) RADEON(0): Memory manager initialized to (0,0) (1280,8191)
(II) RADEON(0): Reserved area from (0,1024) to (1280,1026)
(II) RADEON(0): Largest offscreen area available: 1280 x 7165
(II) RADEON(0): Will use back buffer at offset 0x1400000
(II) RADEON(0): Will use depth buffer at offset 0x1900000
(II) RADEON(0): Will use 100352 kb for textures at offset 0x1e00000
(**) RADEON(0): Initializing backing store
(==) RADEON(0): Backing store disabled
(**) RADEON(0): DRI Finishing init !
(II) RADEON(0): X context handle = 0x1
(II) RADEON(0): [drm] installed DRM signal handler
(II) RADEON(0): [DRI] installation complete
(**) RADEON(0): EngineRestore (32/32)
(II) RADEON(0): [drm] Added 32 65536 byte vertex/indirect buffers
(II) RADEON(0): [drm] Mapped 32 vertex/indirect buffers
(II) RADEON(0): [drm] dma control initialized, using IRQ 11
(II) RADEON(0): [drm] Initialized kernel GART heap manager, 55574528
(WW) RADEON(0): DRI init changed memory map, adjusting ...
(WW) RADEON(0): MC_FB_LOCATION was: 0xc7ffc000 is: 0xc7ffc000
(WW) RADEON(0): MC_AGP_LOCATION was: 0xffffffc0 is: 0xe3ffe000
(**) RADEON(0): GRPH_BUFFER_CNTL from 30004c4c to 20287c7c
(II) RADEON(0): Direct rendering enabled
(**) RADEON(0): Setting up final surfaces
(**) RADEON(0): Initializing Acceleration
(II) RADEON(0): Render acceleration unsupported on Radeon 9500/9700 and newer.
(II) RADEON(0): Render acceleration disabled
(**) RADEON(0): EngineInit (32/32)
(**) RADEON(0): Pitch for acceleration = 160
(**) RADEON(0): EngineRestore (32/32)
(II) RADEON(0): Using XFree86 Acceleration Architecture (XAA)
Screen to screen bit blits
Solid filled rectangles
8x8 mono pattern filled rectangles
Indirect CPU to Screen color expansion
Solid Lines
Scanline Image Writes
Offscreen Pixmaps
Setting up tile and stipple cache:
32 128x128 slots
32 256x256 slots
16 512x512 slots
(II) RADEON(0): Acceleration enabled
(**) RADEON(0): Initializing Page Flipping
(II) RADEON(0): ShadowFB initialized for Page Flipping
(**) RADEON(0): Initializing DPMS
(**) Option "dpms"
(**) RADEON(0): DPMS enabled
(**) RADEON(0): Initializing Cursor
(==) RADEON(0): Silken mouse enabled
(II) RADEON(0): Using hardware cursor (scanline 1026)
(II) RADEON(0): Largest offscreen area available: 1280 x 7161
(**) RADEON(0): Initializing color map
(**) RADEON(0): Initializing DGA
(**) RADEON(0): Initializing Xv
(II) RADEON(0): No video input capabilities detected and no information is provided - disabling multimedia i2c
(II) Loading sub module "theatre_detect"
(II) LoadModule: "theatre_detect"
(II) Loading /usr/lib/xorg/modules/multimedia/theatre_detect_drv.so
(II) Module theatre_detect: vendor="X.Org Foundation"
compiled for 7.1.1, module version = 1.0.0
ABI class: X.Org Video Driver, version 1.0
(II) RADEON(0): no multimedia table present, disabling Rage Theatre.
(**) RADEON(0): RADEONScreenInit finished
(==) RandR enabled
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-APPGROUP
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension XFree86-Bigfont
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) Initializing built-in extension XEVIE
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 9, (OK)
drmOpenByBusid: Searching for BusID pci:0000:01:00.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 9, (OK)
drmOpenByBusid: drmOpenMinor returns 9
drmOpenByBusid: drmGetBusid reports pci:0000:01:00.0
(WW) AIGLX: 3D driver claims to not support visual 0x23
(WW) AIGLX: 3D driver claims to not support visual 0x24
(WW) AIGLX: 3D driver claims to not support visual 0x25
(WW) AIGLX: 3D driver claims to not support visual 0x26
(WW) AIGLX: 3D driver claims to not support visual 0x27
(WW) AIGLX: 3D driver claims to not support visual 0x28
(WW) AIGLX: 3D driver claims to not support visual 0x29
(WW) AIGLX: 3D driver claims to not support visual 0x2a
(WW) AIGLX: 3D driver claims to not support visual 0x2b
(WW) AIGLX: 3D driver claims to not support visual 0x2c
(WW) AIGLX: 3D driver claims to not support visual 0x2d
(WW) AIGLX: 3D driver claims to not support visual 0x2e
(WW) AIGLX: 3D driver claims to not support visual 0x2f
(WW) AIGLX: 3D driver claims to not support visual 0x30
(WW) AIGLX: 3D driver claims to not support visual 0x31
(WW) AIGLX: 3D driver claims to not support visual 0x32
(II) AIGLX: Loaded and initialized /usr/lib/dri/r300_dri.so
(II) GLX: Initialized DRI GL provider for screen 0
error opening security policy file /usr/lib/xserver/SecurityPolicy
(**) Option "CoreKeyboard"
(**) Generic Keyboard: Core Keyboard
(**) Option "Protocol" "standard"
(**) Generic Keyboard: Protocol: standard
(**) Option "AutoRepeat" "500 30"
(**) Option "XkbRules" "xorg"
(**) Generic Keyboard: XkbRules: "xorg"
(**) Option "XkbModel" "pc105"
(**) Generic Keyboard: XkbModel: "pc105"
(**) Option "XkbLayout" "fr"
(**) Generic Keyboard: XkbLayout: "fr"
(**) Option "XkbOptions" "lv3:ralt_switch"
(**) Generic Keyboard: XkbOptions: "lv3:ralt_switch"
(**) Option "CustomKeycodes" "off"
(**) Generic Keyboard: CustomKeycodes disabled
(**) Option "Protocol" "ExplorerPS/2"
(**) Configured Mouse: Device: "/dev/input/mice"
(**) Configured Mouse: Protocol: "ExplorerPS/2"
(**) Option "CorePointer"
(**) Configured Mouse: Core Pointer
(**) Option "Device" "/dev/input/mice"
(**) Option "Emulate3Buttons" "true"
(**) Configured Mouse: Emulate3Buttons, Emulate3Timeout: 50
(**) Option "ZAxisMapping" "4 5"
(**) Configured Mouse: ZAxisMapping: buttons 4 and 5
(**) Configured Mouse: Buttons: 9
(II) XINPUT: Adding extended input device "Configured Mouse" (type: MOUSE)
(II) XINPUT: Adding extended input device "Generic Keyboard" (type: KEYBOARD)
xkb_keycodes { include "xfree86+aliases(azerty)" };
xkb_types { include "complete" };
xkb_compatibility { include "complete" };
xkb_symbols { include "pc(pc105)+fr+level3(ralt_switch)" };
xkb_geometry { include "pc(pc105)" };
(II) Configured Mouse: ps2EnableDataReporting: succeeded
Could not init font path element /usr/share/fonts/X11/TTF/, removing from list!
Could not init font path element /usr/share/fonts/X11/OTF, removing from list!
Could not init font path element /usr/share/fonts/X11/CID/, removing from list!et mon xorg.conf
# /etc/X11/xorg.conf (xorg X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the /etc/X11/xorg.conf manual page.
# (Type "man /etc/X11/xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
# sudo dpkg-reconfigure -phigh xserver-xorg
Section "Files"
FontPath "/usr/share/X11/fonts/misc"
FontPath "/usr/share/X11/fonts/cyrillic"
FontPath "/usr/share/X11/fonts/100dpi/:unscaled"
FontPath "/usr/share/X11/fonts/75dpi/:unscaled"
FontPath "/usr/share/X11/fonts/Type1"
FontPath "/usr/share/X11/fonts/100dpi"
FontPath "/usr/share/X11/fonts/75dpi"
FontPath "/usr/share/fonts/X11/misc"
# path to defoma fonts
FontPath "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
EndSection
Section "Module"
Load "i2c"
Load "bitmap"
Load "ddc"
Load "dri"
Load "extmod"
Load "freetype"
Load "glx"
Load "int10"
Load "type1"
Load "vbe"
EndSection
Section "Extensions"
Option "RENDER" "Enable"
EndSection
Section "InputDevice"
Identifier "Generic Keyboard"
Driver "kbd"
Option "CoreKeyboard"
Option "XkbRules" "xorg"
Option "XkbModel" "pc105"
Option "XkbLayout" "fr"
Option "XkbOptions" "lv3:ralt_switch"
EndSection
Section "InputDevice"
Identifier "Configured Mouse"
Driver "mouse"
Option "CorePointer"
Option "Device" "/dev/input/mice"
Option "Protocol" "ExplorerPS/2"
Option "ZAxisMapping" "4 5"
Option "Emulate3Buttons" "true"
EndSection
Section "InputDevice"
Driver "wacom"
Identifier "stylus"
Option "Device" "/dev/wacom" # Change to
# /dev/input/event
# for USB
Option "Type" "stylus"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection
Section "InputDevice"
Driver "wacom"
Identifier "eraser"
Option "Device" "/dev/wacom" # Change to
# /dev/input/event
# for USB
Option "Type" "eraser"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection
Section "InputDevice"
Driver "wacom"
Identifier "cursor"
Option "Device" "/dev/wacom" # Change to
# /dev/input/event
# for USB
Option "Type" "cursor"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection
Section "Device"
Identifier "ATI Technologies, Inc. RV350 AP [Radeon 9600]"
Driver "radeon"
BusID "PCI:1:0:0"
Option "AccelMethod" "XAA" # Use XFree86 Acceleration Architecture
Option "AccelDFS" "0" # mettez à 0 si vous avez une carte AGP
Option "AGPMode" "4" # Décommentez si vous avez une carte AGP
Option "AGPSize" "128" # Décommentez si vous avec une carte AGP AGP aperture size
Option "GARTSize" "64"
Option "RingSize" "8"
Option "BufferSize" "2"
Option "EnablePageFlip" "1" # Enable page flipping for 3D apps
Option "ColorTiling" "1"
Option "EnableDepthMoves" "yes"
Option "UseFBDev" "false"
Option "RenderAccel" "true" # Enable the hardware render acceleration
Option "mtrr" "on"
Option "SubPixelOrder" "none"
Option "DPMS"
Option "DynamicClocks" "on"
EndSection
Section "Monitor"
Identifier "Philips 170C"
Option "DPMS"
EndSection
Section "Screen"
Identifier "Default Screen"
Device "ATI Technologies, Inc. RV350 AP [Radeon 9600]"
Monitor "Philips 170C"
DefaultDepth 24
SubSection "Display"
Depth 1
Modes "1280x1024" "1280x960" "1152x864" "1024x768" "832x624" "800x600" "720x400" "640x480"
EndSubSection
SubSection "Display"
Depth 4
Modes "1280x1024" "1280x960" "1152x864" "1024x768" "832x624" "800x600" "720x400" "640x480"
EndSubSection
SubSection "Display"
Depth 8
Modes "1280x1024" "1280x960" "1152x864" "1024x768" "832x624" "800x600" "720x400" "640x480"
EndSubSection
SubSection "Display"
Depth 15
Modes "1280x1024" "1280x960" "1152x864" "1024x768" "832x624" "800x600" "720x400" "640x480"
EndSubSection
SubSection "Display"
Depth 16
Modes "1280x1024" "1280x960" "1152x864" "1024x768" "832x624" "800x600" "720x400" "640x480"
EndSubSection
SubSection "Display"
Depth 24
Modes "1280x1024" "1280x960" "1152x864" "1024x768" "832x624" "800x600" "720x400" "640x480"
EndSubSection
EndSection
Section "ServerLayout"
Identifier "Default Layout"
Screen "Default Screen"
InputDevice "Generic Keyboard"
InputDevice "Configured Mouse"
# InputDevice "stylus" "SendCoreEvents"
# InputDevice "cursor" "SendCoreEvents"
# InputDevice "eraser" "SendCoreEvents"
EndSection
Section "DRI"
Mode 0666
EndSectionY'a plein d'erreur dans le log et j'ai l'impression que ma cg n'est pas référencé dans la liste des carte supportée ça vient peut être de là. J'en sais rien. Je commence vraimnt à désespérer.
Merci
Kubuntu 20.04.1 LTS | AMD Ryzen 5-1500X | CM Gigabyte AB350-Gaming3 | RAM 2*4Go GSKILL DDR4 | SSD Samsung 860 Evo 1To+ 850 Evo 500Go | CG MSI Geforce GTX1050TI 4Go | Écran BenQ FP91GX | Clavier Logitech solar wireless | Logitech G502 Lightspeed | Boitier Thermaltake Suppressor F31 | Wacom Bamboo Fun CTH-461 | NAS Synology Ds216 2*2To
Hors ligne
#15 Le 16/11/2006, à 19:19
- Djrem
Re : ati mobility radeon 9700
un petit up pour ce sujet qui pour moi n'est pas résolu.
Merci
Kubuntu 20.04.1 LTS | AMD Ryzen 5-1500X | CM Gigabyte AB350-Gaming3 | RAM 2*4Go GSKILL DDR4 | SSD Samsung 860 Evo 1To+ 850 Evo 500Go | CG MSI Geforce GTX1050TI 4Go | Écran BenQ FP91GX | Clavier Logitech solar wireless | Logitech G502 Lightspeed | Boitier Thermaltake Suppressor F31 | Wacom Bamboo Fun CTH-461 | NAS Synology Ds216 2*2To
Hors ligne
#16 Le 14/12/2006, à 12:16
- blue
Re : ati mobility radeon 9700
Bonjour.
ayant fait plusieurs recherches et ne trouvant pas de réponses à ce sujet, je pose ma question ici.
Je viens d'installer une edgy est toute fraiche.
Je possède une radeon 9700 mobility.
Ma question. J'essaye de passer aux drivers libres radeon (pour remplacer fglrx).
J'édite donc mon xorg.conf en conséquences.
Mais, ce que je voudrais savoir, c'est si il faut désinstaller fglrx.
Je constate que fglrx est présent (j'entend pas là qu'il m'a l'air installé) dans synaptic, MAIS, je ne les ai jamais installés.
Donc : dois-je me contenter de remplacer "ati" par "radeon" (dans mon xorg.conf), ou bien faut-il également retirer "fglrx" grâce à synaptic?
Merci d'avance.
#17 Le 14/12/2006, à 12:37
- Astidiel
Re : ati mobility radeon 9700
la reponse a ta question est dans le wiki.
Aller je suis gentil voila le lien: 
http://doc.ubuntu-fr.org/materiel/ati_radeon
Celui qui reçoit une idée de moi reçoit un savoir sans diminuer le mien, tout comme celui qui allume sa bougie à la mienne reçoit la lumière sans me plonger dans la pénombre. Thomas Jefferson
Hors ligne
#18 Le 14/12/2006, à 12:44
- blue
Re : ati mobility radeon 9700
Merci.
J'ai déja consulté cette page, mais je reste un peu dans le flou 
Si vous avez installé ou tenté d'installer les drivers fglrx, il faut tout d'abord les supprimer.
Donc, via Synaptic, il faut rechercher fglrx et supprimer les paquets fglrx-control et xorg-driver-fglrx
Je ne les ai pas installés, MAIS ils sont bien présents dans synaptic, donc, dois j'en en déduire que je dois les désinstaller et que par défaut, edgy les installe?
#19 Le 18/12/2006, à 12:33
- blue
Re : ati mobility radeon 9700
Bon, ça avance progressivement.
Mais je me posait une petite question dont je n'arrive toujours pas à trouver la réponse.
Est ce que vous avez bien installé les paquets suivants :
fglrx-kernel-source - ATI binary kernel module source
et selon votre kernel :
linux-restricted-modules-2.6.17-10-386 - Non-free Linux 2.6.17 modules on 386
ou
linux-restricted-modules-2.6.17-10-generic - Non-free Linux 2.6.17 modules on x86_64 generic
Dans le cas d'une installation de Edgy 32 bits sur un Athlon64, lequel de ces kernels dois-je utiliser?
(cette question ce répercute dans le choix du kernel pour optimiser mon zoli buntu: Si j'installe une edgy 32bits, toujours sur mon Athlon64 bits, dois-je utiliser un kernel K7, ou un kernel K8, ou bien cela est automatiquement détecté et optimisé?)
Je vous remercie d'avance.
#20 Le 21/12/2006, à 11:07
- blue
Re : ati mobility radeon 9700
Bon, et bein mes recherches restant sans résultats:(, je vous serais vraiment très reconnaissant si vous quelqu'un pouvait me donner un tout petit peu plus d'explication s'il vous plait.
Merci d'avance.
#21 Le 21/12/2006, à 11:25
- JerhuM
Re : ati mobility radeon 9700
J'ai une ati mobility radeon 9700
il faut suivre la doc :
sudo apt-get install xorg-driver-fglrx fglrx-control libqt3-mt
sudo aticonfig --initialrajouter ca a la fin du Xorg.conf pour edgy ( sudo gedit /etc/X11/xorg.conf )
Section "Extensions"
Option "Composite" "disable"
EndSection
et enfin rajouter fglrx dans le fichier /etc/modules
redemarrer
http://www.jeuxlinux.fr le maximum de documentations, aides et support en français pour le jeu sous Linux
Hors ligne
#22 Le 21/12/2006, à 11:50
- blue
Re : ati mobility radeon 9700
Merci beaucoup, mais ce que je voudrais, c'est passer aux drivers libres.
Bon et bien à défaut, je vais tenter fglrx (qui sont installés mais pas configurés par défaut, si j'ai bien saisis), mais cela ne me tente pas trop
Car si j'ai bien saisi, ils ne permettent pas d'activer l'accelleration 3D de la 9700 mobility, ce que à priori feraient les drivers libres.
PS : je réitère ma question au cas ou, car pour moi, je ne comprend pas la marche à suivre (je sors de 10 ans de Win, ce n'est pas simple simple au début
Voici ce que j'ai trouvé dans le tuto pour les drivers ati :
Est ce que vous avez bien installé les paquets suivants :
fglrx-kernel-source - ATI binary kernel module source
et selon votre kernel :
linux-restricted-modules-2.6.17-10-386 - Non-free Linux 2.6.17 modules on 386
ou
linux-restricted-modules-2.6.17-10-generic - Non-free Linux 2.6.17 modules on x86_64 generic
Je me demandais lequel de ces kernels dois-je utiliser le cas d'une installation de Edgy 32 bits sur un Athlon64,?
Et du coup, même question pour optimiser mon ubuntu: Si j'installe une edgy 32bits, toujours sur mon Athlon64 bits, dois-je utiliser un kernel K7, ou un kernel K8, ou bien cela est automatiquement détecté et optimisé?)
En tout cas, merci pour tout.
#23 Le 21/12/2006, à 12:43
- JerhuM
Re : ati mobility radeon 9700
les drivers libre chez moi, j'ai pas trop testé la configuration mais ca me permet uniquement de jouer au petit jeux qui demande pas trop d'accélération ...
http://www.jeuxlinux.fr le maximum de documentations, aides et support en français pour le jeu sous Linux
Hors ligne
#24 Le 21/12/2006, à 22:08
- Astidiel
Re : ati mobility radeon 9700
blue a écrit :
Merci beaucoup, mais ce que je voudrais, c'est passer aux drivers libres.
Bon et bien à défaut, je vais tenter fglrx (qui sont installés mais pas configurés par défaut, si j'ai bien saisis), mais cela ne me tente pas trop
Car si j'ai bien saisi, ils ne permettent pas d'activer l'accelleration 3D de la 9700 mobility, ce que à priori feraient les drivers libres.PS : je réitère ma question au cas ou, car pour moi, je ne comprend pas la marche à suivre (je sors de 10 ans de Win, ce n'est pas simple simple au début
Voici ce que j'ai trouvé dans le tuto pour les drivers ati :Est ce que vous avez bien installé les paquets suivants :
fglrx-kernel-source - ATI binary kernel module source
et selon votre kernel :
linux-restricted-modules-2.6.17-10-386 - Non-free Linux 2.6.17 modules on 386
ou
linux-restricted-modules-2.6.17-10-generic - Non-free Linux 2.6.17 modules on x86_64 genericJe me demandais lequel de ces kernels dois-je utiliser le cas d'une installation de Edgy 32 bits sur un Athlon64,?
Et du coup, même question pour optimiser mon ubuntu: Si j'installe une edgy 32bits, toujours sur mon Athlon64 bits, dois-je utiliser un kernel K7, ou un kernel K8, ou bien cela est automatiquement détecté et optimisé?)
En tout cas, merci pour tout.
pour te repondre:
les drivers fglrx permettent d'avoir l'acceleration 3d
dans ton cas, je pense que c'est cette ligne:
linux-restricted-modules-2.6.17-10-generic - Non-free Linux 2.6.17 modules on x86_64 generic
Celui qui reçoit une idée de moi reçoit un savoir sans diminuer le mien, tout comme celui qui allume sa bougie à la mienne reçoit la lumière sans me plonger dans la pénombre. Thomas Jefferson
Hors ligne
#25 Le 22/12/2006, à 10:55
- blue
Re : ati mobility radeon 9700
Merci Astadiel.
Bon, je poste un petit retour.
Après avoir un peu galéré 
, j'ai réussi...
J'ai donc installé fglrx. L'accelleration 3D était bien activée, mais quelle lenteur (~250fps sur glxgears )
Je suis donc retourné du côté des drivers radeon, et après 2/3 modification de mon xorg.conf, je passe à ~4000fps, toujours sur glxgears (et ceci, toujours avec l'acceleration 3D..).
Donc, d'après mon expérience, si vous n'avez pas l'intention d'utiliser beryl (et que vous êtes sur une ati radeon 9700 mobility), ne vous prenez pas la tête avec fglrx, c'est bien plus simple avec les drivers libres.
Voilà.