Ubuntu-fr

moe

Resolution et acceleration ATI

bonjour

alors j'ai reussi à installer Beryl et ce n'est pas un mythe

mais 2 petits problemes demeurent

le premier
$  glxinfo | grep rendering
libGL warning: 3D driver claims to not support visual 0x4b
direct rendering: Yes

le second : ma resolution est bloquee sur 800x600 avec tx de raffraichissement à 60HZ

alors si une ame charitable jette un oeil sur ce post, je lui en serais reconnaissant, mais alors vraiment beaucoup

ci joint mon xconf

# /etc/X11/xorg.conf (xorg X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the /etc/X11/xorg.conf manual page.
# (Type "man /etc/X11/xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
#   sudo dpkg-reconfigure -phigh xserver-xorg

Section "Files"
	FontPath	"/usr/share/X11/fonts/misc"
	FontPath	"/usr/share/X11/fonts/cyrillic"
	FontPath	"/usr/share/X11/fonts/100dpi/:unscaled"
	FontPath	"/usr/share/X11/fonts/75dpi/:unscaled"
	FontPath	"/usr/share/X11/fonts/Type1"
	FontPath	"/usr/share/X11/fonts/100dpi"
	FontPath	"/usr/share/X11/fonts/75dpi"
	FontPath	"/usr/share/fonts/X11/misc"
	# path to defoma fonts
	FontPath	"/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
EndSection

Section "Module"
	Load	"i2c"
	Load	"dbe"
	Load	"bitmap"
	Load	"ddc"
	Load	"dri"
	Load	"extmod"
	Load	"freetype"
	Load	"glx"
	Load	"int10"
	Load	"type1"
	Load	"vbe"
EndSection

Section "InputDevice"
	Identifier	"Generic Keyboard"
	Driver		"kbd"
	Option		"CoreKeyboard"
	Option		"XkbRules"	"xorg"
	Option		"XkbModel"	"pc105"
	Option		"XkbLayout"	"fr"
	Option		"XkbOptions"	"lv3:ralt_switch"
EndSection

Section "InputDevice"
	Identifier	"Configured Mouse"
	Driver		"mouse"
	Option		"CorePointer"
	Option		"Device"		"/dev/input/mice"
	Option		"Protocol"		"ExplorerPS/2"
	Option		"ZAxisMapping"		"4 5"
	Option		"Emulate3Buttons"	"true"
EndSection

Section "InputDevice"
  Driver        "wacom"
  Identifier    "stylus"
  Option        "Device"        "/dev/wacom"          # Change to 
                                                      # /dev/input/event
                                                      # for USB
  Option        "Type"          "stylus"
  Option        "ForceDevice"   "ISDV4"               # Tablet PC ONLY
EndSection

Section "InputDevice"
  Driver        "wacom"
  Identifier    "eraser"
  Option        "Device"        "/dev/wacom"          # Change to 
                                                      # /dev/input/event
                                                      # for USB
  Option        "Type"          "eraser"
  Option        "ForceDevice"   "ISDV4"               # Tablet PC ONLY
EndSection

Section "InputDevice"
  Driver        "wacom"
  Identifier    "cursor"
  Option        "Device"        "/dev/wacom"          # Change to 
                                                      # /dev/input/event
                                                      # for USB
  Option        "Type"          "cursor"
  Option        "ForceDevice"   "ISDV4"               # Tablet PC ONLY
EndSection

Section "Device"
	Identifier	"ATI Technologies, Inc. Radeon RV100 QY [Radeon 7000/VE]"
	Driver		"radeon"
	BusID		"PCI:1:0:0"
   Option "AccelMethod" "XAA" # Use XFree86 Acceleration Architecture
        Option "AccelDFS"    "1" # mettez à 0 si vous avez une carte AGP
#       Option 	"AGPMode" "4" # Décommentez si vous avez une carte AGP
#       Option "AGPSize" "128" # Décommentez si vous avec une carte AGP AGP aperture size
        Option "GARTSize" "64"
        Option "RingSize" "8"
        Option "BufferSize" "2"
        Option "EnablePageFlip" "1" # Enable page flipping for 3D apps
        Option "ColorTiling" "1"
        Option "EnableDepthMoves" "yes"
        Option "UseFBDev" "false"
        Option "RenderAccel" "true" # Enable the hardware render acceleration
        Option "mtrr" "on"
        Option	"SubPixelOrder" "none"
        Option "DPMS"
        Option "DynamicClocks" "on"
EndSection

Section "Monitor"
	Identifier	"BenQ T701"
	Option		"DPMS"
	Option         "UseEDID" "false"
EndSection

Section "Screen"
	Identifier	"Default Screen"
	Device		"ATI Technologies, Inc. Radeon RV100 QY [Radeon 7000/VE]"
	Monitor		"BenQ T701"
	DefaultDepth	24
	Option         "UseEDID" "false"
	Option       "DynamicTwinView" "false"
    
	SubSection "Display"
		
		Depth		24
		Modes		"1280x1024" "1152x864" "1024x768" "832x624" "800x600" "720x400" "640x480" "640x350"
    Option         "AddARGBGLXVisuals" "True"
	EndSubSection
EndSection

Section "ServerLayout"
	Identifier	"Default Layout"
	Screen		"Default Screen"
	InputDevice	"Generic Keyboard"
	InputDevice	"Configured Mouse"
	InputDevice     "stylus" "SendCoreEvents"
	InputDevice     "cursor" "SendCoreEvents"
	InputDevice     "eraser" "SendCoreEvents"
EndSection

Section "DRI"
	Mode	0666
EndSection

Section "Extensions"
	Option "Composite" "Enable"
EndSection

merci d'avance